diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
| commit | e3950967f6e6b74a3606739ec50ed19f3398c7d8 (patch) | |
| tree | 7e71d022167eca97b96ca3d675a1cbee55b06889 /arch | |
| parent | cc0f7c3f97bc6e888bf4be28a9da9dbd3735d2b4 (diff) | |
| parent | 48d2245586452b8279a854970ce82f43477669d3 (diff) | |
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
Diffstat (limited to 'arch')
766 files changed, 55870 insertions, 9949 deletions
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index 4247f19b1adc..cd0d044882cf 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -261,68 +261,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb -dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a23-evb.dtb \ - sun8i-a23-gt90h-v4.dtb \ - sun8i-a23-inet86dz.dtb \ - sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb \ - sun8i-a23-polaroid-mid2407pxe03.dtb \ - sun8i-a23-polaroid-mid2809pxe04.dtb \ - sun8i-a23-q8-tablet.dtb \ - sun8i-a33-et-q8-v1.6.dtb \ - sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-inet-d978-rev2.dtb \ - sun8i-a33-ippo-q8h-v1.2.dtb \ - sun8i-a33-olinuxino.dtb \ - sun8i-a33-q8-tablet.dtb \ - sun8i-a33-sinlinx-sina33.dtb \ - sun8i-a83t-allwinner-h8homlet-v2.dtb \ - sun8i-a83t-bananapi-m3.dtb \ - sun8i-a83t-cubietruck-plus.dtb \ - sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-bananapi-m2-zero.dtb \ - sun8i-h2-plus-libretech-all-h3-cc.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-bananapi-m2-plus-v1.2.dtb \ - sun8i-h3-beelink-x2.dtb \ - sun8i-h3-libretech-all-h3-cc.dtb \ - sun8i-h3-mapleboard-mp130.dtb \ - sun8i-h3-nanopi-duo2.dtb \ - sun8i-h3-nanopi-m1.dtb\ - \ - sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-nanopi-neo-air.dtb \ - sun8i-h3-nanopi-r1.dtb \ - sun8i-h3-orangepi-2.dtb \ - sun8i-h3-orangepi-lite.dtb \ - sun8i-h3-orangepi-one.dtb \ - sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-pc-plus.dtb \ - sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb \ - sun8i-h3-rervision-dvk.dtb \ - sun8i-h3-zeropi.dtb \ - sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ - sun8i-r16-bananapi-m2m.dtb \ - sun8i-r16-nintendo-nes-classic.dtb \ - sun8i-r16-nintendo-super-nes-classic.dtb \ - sun8i-r16-parrot.dtb \ - sun8i-r40-bananapi-m2-ultra.dtb \ - sun8i-r40-oka40i-c.dtb \ - sun8i-s3-elimo-initium.dtb \ - sun8i-s3-lichee-zero-plus.dtb \ - sun8i-s3-pinecube.dtb \ - sun8i-t113s-mangopi-mq-r-t113.dtb \ - sun8i-t3-cqa3t-bv3.dtb \ - sun8i-v3-sl631-imx179.dtb \ - sun8i-v3s-licheepi-zero.dtb \ - sun8i-v3s-licheepi-zero-dock.dtb \ - sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi index a79e1d1d30a7..7f62aef9ca8a 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi @@ -22,7 +22,7 @@ / { /* Introduce a fixed regulator for the new ethernet controller */ - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi index fbb2258b451f..16f784da5a55 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi @@ -45,7 +45,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -53,13 +53,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -67,48 +67,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts index d99bac02232b..b9b10cbd65aa 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts @@ -63,13 +63,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -77,40 +77,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts index 89103d54ecc1..ce35748f3d25 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts @@ -163,19 +163,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -183,48 +183,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi index ec1507c5147c..e625403a9456 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi @@ -62,19 +62,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -82,48 +82,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts index 367850ea0912..db13e09f2fab 100644 --- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts @@ -54,7 +54,7 @@ }; /* Also used for the Smart Card Interface SCI */ - impd1_uartclk: clock@1_4 { + impd1_uartclk: clock-uart { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <4>; @@ -64,7 +64,7 @@ }; /* For the SSP the clock is divided by 64 */ - impd1_sspclk: clock@1_64 { + impd1_sspclk: clock-ssp { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <64>; diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts index d9927d3181dc..9b6a1dbaf265 100644 --- a/arch/arm/boot/dts/arm/integratorap.dts +++ b/arch/arm/boot/dts/arm/integratorap.dts @@ -57,22 +57,14 @@ }; /* 24 MHz chrystal on the Integrator/AP development board */ - xtal24mhz: xtal24mhz@24M { + xtal24mhz: pclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - pclk: pclk@0 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* The UART clock is 14.74 MHz divided by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; @@ -81,7 +73,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts index c011333eb165..8ad1a8957ace 100644 --- a/arch/arm/boot/dts/arm/integratorcp.dts +++ b/arch/arm/boot/dts/arm/integratorcp.dts @@ -47,14 +47,14 @@ */ /* The codec chrystal operates at 24.576 MHz */ - xtal_codec: xtal24.576@24.576M { + xtal_codec: clock-24576000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24576000>; }; /* The chrystal is divided by 2 by the codec for the AACI bit clock */ - aaci_bitclk: aaci_bitclk@12.288M { + aaci_bitclk: clock-12288000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <2>; @@ -63,21 +63,21 @@ }; /* This is a 25MHz chrystal on the base board */ - xtal25mhz: xtal25mhz@25M { + xtal25mhz: clock-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; }; /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; }; /* Actually sysclk I think */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -85,7 +85,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -131,7 +131,7 @@ }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi index ce308820765b..e240bc8aa605 100644 --- a/arch/arm/boot/dts/arm/mps2.dtsi +++ b/arch/arm/boot/dts/arm/mps2.dtsi @@ -48,37 +48,37 @@ #address-cells = <1>; #size-cells = <1>; - oscclk0: clk-osc0 { + oscclk0: clock-50000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; }; - oscclk1: clk-osc1 { + oscclk1: clock-24576000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; - oscclk2: clk-osc2 { + oscclk2: clock-25000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - cfgclk: clk-cfg { + cfgclk: clock-5000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <5000000>; }; - spicfgclk: clk-spicfg { + spicfgclk: clock-75000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <75000000>; }; - sysclk: clk-sys { + sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys { compatible = "fixed-factor-clock"; clocks = <&oscclk0>; #clock-cells = <0>; @@ -86,7 +86,7 @@ clock-mult = <1>; }; - audmclk: clk-audm { + audmclk: clk-12388000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -94,7 +94,7 @@ clock-mult = <1>; }; - audsclk: clk-auds { + audsclk: clk-3072000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -102,38 +102,6 @@ clock-mult = <1>; }; - spiclcd: clk-cpiclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - spicon: clk-spicon { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2cclcd: clk-i2cclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2caud: clk-i2caud { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - soc { compatible = "simple-bus"; ranges; diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts index de45aa99e260..6fe6b49f5d8e 100644 --- a/arch/arm/boot/dts/arm/versatile-ab.dts +++ b/arch/arm/boot/dts/arm/versatile-ab.dts @@ -24,7 +24,7 @@ reg = <0x0 0x08000000>; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -142,14 +142,14 @@ }; /* OSC1 on AB, OSC4 on PB */ - osc1: cm_aux_osc@24M { + osc1: clock-osc { #clock-cells = <0>; compatible = "arm,versatile-cm-auxosc"; clocks = <&xtal24mhz>; }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -157,7 +157,7 @@ clocks = <&xtal24mhz>; }; - pclk: pclk@24M { + pclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi index 8af4b77fe655..158b3923eae3 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -28,21 +28,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi index c5e92f6d2fcd..be03f2a8a57a 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi @@ -351,7 +351,7 @@ }; }; - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -359,21 +359,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -436,7 +436,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* MCC static memory clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -445,7 +445,7 @@ clock-output-names = "v2m:oscclk0"; }; - v2m_oscclk1: oscclk1 { + v2m_oscclk1: clock-controller-1 { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -454,7 +454,7 @@ clock-output-names = "v2m:oscclk1"; }; - v2m_oscclk2: oscclk2 { + v2m_oscclk2: clock-controller-2 { /* IO FPGA peripheral clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -463,7 +463,7 @@ clock-output-names = "v2m:oscclk2"; }; - volt-vio { + regulator-vio { /* Logic level voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts index 679537e17ff5..5a91e936edef 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts @@ -142,7 +142,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* CPU PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -151,7 +151,7 @@ clock-output-names = "oscclk0"; }; - oscclk4 { + clock-controller-4 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -160,7 +160,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -169,7 +169,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -178,7 +178,7 @@ clock-output-names = "oscclk6"; }; - sys_pll: oscclk7 { + sys_pll: clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -187,7 +187,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -196,7 +196,7 @@ clock-output-names = "oscclk8"; }; - volt-cores { + regulator-cores { /* CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts index 511e87cc2bc5..6ef23c53d2d8 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts @@ -253,7 +253,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* A15 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -262,7 +262,7 @@ clock-output-names = "oscclk0"; }; - oscclk1 { + clock-controller-1 { /* A15 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -271,7 +271,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* A7 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -280,7 +280,7 @@ clock-output-names = "oscclk2"; }; - oscclk3 { + clock-controller-3 { /* A7 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -289,7 +289,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* External AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -298,7 +298,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -307,7 +307,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* Static memory controller clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -316,7 +316,7 @@ clock-output-names = "oscclk6"; }; - oscclk7 { + clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -325,7 +325,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -334,7 +334,7 @@ clock-output-names = "oscclk8"; }; - volt-a15 { + regulator-a15 { /* A15 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -345,7 +345,7 @@ label = "A15 Vcore"; }; - volt-a7 { + regulator-a7 { /* A7 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts index ff1f9a1bcfcf..e3896253f33e 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts @@ -145,7 +145,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - cpu_clk: oscclk0 { + cpu_clk: clock-controller-0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -154,7 +154,7 @@ clock-output-names = "oscclk0"; }; - axi_clk: oscclk1 { + axi_clk: clock-controller-1 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -163,7 +163,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* DDR2 */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -172,7 +172,7 @@ clock-output-names = "oscclk2"; }; - hdlcd_clk: oscclk3 { + hdlcd_clk: clock-controller-3 { /* HDLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -181,7 +181,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* Test chip gate configuration */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -190,7 +190,7 @@ clock-output-names = "oscclk4"; }; - smbclk: oscclk5 { + smbclk: clock-controller-5 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts index 8bf35666412b..43a5a4ab6ff0 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts @@ -187,7 +187,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0: extsaxiclk { + oscclk0: clock-controller-0 { /* ACLK clock to the AXI master port on the test chip */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -196,7 +196,7 @@ clock-output-names = "extsaxiclk"; }; - oscclk1: clcdclk { + oscclk1: clock-controller-1 { /* Reference clock for the CLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -205,7 +205,7 @@ clock-output-names = "clcdclk"; }; - smbclk: oscclk2: tcrefclk { + smbclk: oscclk2: clock-controller-2 { /* Reference clock for the test chip internal PLLs */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -214,7 +214,7 @@ clock-output-names = "tcrefclk"; }; - volt-vd10 { + regulator-vd10 { /* Test Chip internal logic voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -223,7 +223,7 @@ label = "VD10"; }; - volt-vd10-s2 { + regulator-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; @@ -232,7 +232,7 @@ label = "VD10_S2"; }; - volt-vd10-s3 { + regulator-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 2>; @@ -241,7 +241,7 @@ label = "VD10_S3"; }; - volt-vcc1v8 { + regulator-vcc1v8 { /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 3>; @@ -250,7 +250,7 @@ label = "VCC1V8"; }; - volt-ddr2vtt { + regulator-ddr2vtt { /* DDR2 SDRAM VTT termination voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 4>; @@ -259,7 +259,7 @@ label = "DDR2VTT"; }; - volt-vcc3v3 { + regulator-vcc3v3 { /* Local board supply for miscellaneous logic external to the Test Chip */ arm,vexpress-sysreg,func = <2 5>; compatible = "arm,vexpress-volt"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 857cb26ed6d7..c669ec202085 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -463,7 +463,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -478,7 +478,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -493,7 +493,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -509,7 +509,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -525,7 +525,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -541,7 +541,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -557,7 +557,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -573,7 +573,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -589,7 +589,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +605,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -621,7 +621,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -637,7 +637,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -653,7 +653,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -669,7 +669,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index e6f3cf3c721e..6e05cbcce49c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -592,7 +592,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -607,7 +607,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -622,7 +622,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -638,7 +638,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -654,7 +654,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -670,7 +670,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -686,7 +686,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -702,7 +702,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -718,7 +718,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -734,7 +734,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -750,7 +750,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -766,7 +766,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -782,7 +782,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -798,7 +798,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 7fb421153596..0c00882f111a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -905,7 +905,7 @@ #include "aspeed-g6-pinctrl.dtsi" &i2c { - i2c0: i2c-bus@80 { + i2c0: i2c@80 { #address-cells = <1>; #size-cells = <0>; reg = <0x80 0x80>; @@ -919,7 +919,7 @@ status = "disabled"; }; - i2c1: i2c-bus@100 { + i2c1: i2c@100 { #address-cells = <1>; #size-cells = <0>; reg = <0x100 0x80>; @@ -933,7 +933,7 @@ status = "disabled"; }; - i2c2: i2c-bus@180 { + i2c2: i2c@180 { #address-cells = <1>; #size-cells = <0>; reg = <0x180 0x80>; @@ -947,7 +947,7 @@ status = "disabled"; }; - i2c3: i2c-bus@200 { + i2c3: i2c@200 { #address-cells = <1>; #size-cells = <0>; reg = <0x200 0x80>; @@ -961,7 +961,7 @@ status = "disabled"; }; - i2c4: i2c-bus@280 { + i2c4: i2c@280 { #address-cells = <1>; #size-cells = <0>; reg = <0x280 0x80>; @@ -975,7 +975,7 @@ status = "disabled"; }; - i2c5: i2c-bus@300 { + i2c5: i2c@300 { #address-cells = <1>; #size-cells = <0>; reg = <0x300 0x80>; @@ -989,7 +989,7 @@ status = "disabled"; }; - i2c6: i2c-bus@380 { + i2c6: i2c@380 { #address-cells = <1>; #size-cells = <0>; reg = <0x380 0x80>; @@ -1003,7 +1003,7 @@ status = "disabled"; }; - i2c7: i2c-bus@400 { + i2c7: i2c@400 { #address-cells = <1>; #size-cells = <0>; reg = <0x400 0x80>; @@ -1017,7 +1017,7 @@ status = "disabled"; }; - i2c8: i2c-bus@480 { + i2c8: i2c@480 { #address-cells = <1>; #size-cells = <0>; reg = <0x480 0x80>; @@ -1031,7 +1031,7 @@ status = "disabled"; }; - i2c9: i2c-bus@500 { + i2c9: i2c@500 { #address-cells = <1>; #size-cells = <0>; reg = <0x500 0x80>; @@ -1045,7 +1045,7 @@ status = "disabled"; }; - i2c10: i2c-bus@580 { + i2c10: i2c@580 { #address-cells = <1>; #size-cells = <0>; reg = <0x580 0x80>; @@ -1059,7 +1059,7 @@ status = "disabled"; }; - i2c11: i2c-bus@600 { + i2c11: i2c@600 { #address-cells = <1>; #size-cells = <0>; reg = <0x600 0x80>; @@ -1073,7 +1073,7 @@ status = "disabled"; }; - i2c12: i2c-bus@680 { + i2c12: i2c@680 { #address-cells = <1>; #size-cells = <0>; reg = <0x680 0x80>; @@ -1087,7 +1087,7 @@ status = "disabled"; }; - i2c13: i2c-bus@700 { + i2c13: i2c@700 { #address-cells = <1>; #size-cells = <0>; reg = <0x700 0x80>; @@ -1101,7 +1101,7 @@ status = "disabled"; }; - i2c14: i2c-bus@780 { + i2c14: i2c@780 { #address-cells = <1>; #size-cells = <0>; reg = <0x780 0x80>; @@ -1115,7 +1115,7 @@ status = "disabled"; }; - i2c15: i2c-bus@800 { + i2c15: i2c@800 { #address-cells = <1>; #size-cells = <0>; reg = <0x800 0x80>; diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts index 7fb532f227af..808cd5778e27 100644 --- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts @@ -30,7 +30,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing-320x240 { hactive = <320>; hback-porch = <0>; hfront-porch = <0>; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts index 2eec5f63d399..2f7c34c649ea 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts @@ -90,11 +90,18 @@ timeout-ms = <5000>; }; - gpio-beeper { - compatible = "gpio-beeper"; + gpio_pwm: pwm { + #pwm-cells = <3>; + compatible = "pwm-gpio"; gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; }; + beeper { + compatible = "pwm-beeper"; + pwms = <&gpio_pwm 0 1 0>; + beeper-hz = <1000>; + }; + soc { bus@c4000000 { /* The first 16MB region at CS0 on the expansion bus */ diff --git a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi index 0b8c2a64b36f..954c891e5aee 100644 --- a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi @@ -168,7 +168,6 @@ mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; }; diff --git a/arch/arm/boot/dts/marvell/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi index ddc49547d786..99778b4b7e7b 100644 --- a/arch/arm/boot/dts/marvell/armada-375.dtsi +++ b/arch/arm/boot/dts/marvell/armada-375.dtsi @@ -376,7 +376,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts index 5a9ab8410b7b..2fb7304039be 100644 --- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts @@ -43,6 +43,17 @@ }; }; }; + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>; + }; }; &pciec { @@ -149,7 +160,7 @@ #size-cells = <0>; reg = <3>; - gpio@20 { + led_7seg_gpio: gpio@20 { compatible = "nxp,pca9554"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 7b755bb4e4e7..43202890c959 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -112,6 +112,19 @@ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + + front-button { + label = "Front Button"; + linux,code = <KEY_VENDOR>; + linux,can-disable; + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; + /* debouncing is done by the microcontroller */ + debounce-interval = <0>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; @@ -218,7 +231,22 @@ #size-cells = <0>; reg = <0>; - /* STM32F0 command interface at address 0x2a */ + mcu: system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcu_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; led-controller@2b { compatible = "cznic,turris-omnia-leds"; @@ -501,6 +529,11 @@ }; &pinctrl { + mcu_pins: mcu-pins { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pcawan_pins: pcawan-pins { marvell,pins = "mpp46"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi index 446861b6b17b..1181b13deabc 100644 --- a/arch/arm/boot/dts/marvell/armada-38x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi @@ -408,7 +408,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi index 9d1cac49c022..6d05835efb42 100644 --- a/arch/arm/boot/dts/marvell/armada-39x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi @@ -268,7 +268,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts index 07fbfca444d5..36b90c632fd6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts @@ -35,13 +35,13 @@ gpio_keys { compatible = "gpio-keys"; - reset { + button-reset { label = "Reset"; linux,code = <KEY_POWER>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - button { + button-power { label = "Power"; linux,code = <KEY_SLEEP>; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; @@ -51,7 +51,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-power { + led-blue-power { label = "nas220:blue:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts index f59ff7578dfc..7e3ee64d4bdf 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts @@ -29,25 +29,25 @@ pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; - usb1 { + button-usb1 { label = "USB1 Button"; linux,code = <BTN_0>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - usb2 { + button-usb2 { label = "USB2 Button"; linux,code = <BTN_1>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts index 448b0cd23b5f..151edcd140a0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts @@ -58,10 +58,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + key-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; @@ -71,11 +69,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "cloudbox:red:fail"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - blue-sata { + led-blue-sata { label = "cloudbox:blue:sata"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts index bd3b266dd766..fcce8730d3e3 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts @@ -37,7 +37,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "d2net_v2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts index 0c0851cd9bec..2f6793f794cd 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts @@ -137,38 +137,38 @@ gpio-leds { compatible = "gpio-leds"; - blue-usb { + led-blue-usb { label = "dir665:blue:usb"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-internet { + led-blue-internet { /* Can only be turned on if the Internet * Ethernet port has Link */ label = "dir665:blue:internet"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - amber-internet { + led-amber-internet { label = "dir665:amber:internet"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - blue-wifi5g { + led-blue-wifi5g { label = "dir665:blue:5g"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - blue-status { + led-blue-status { label = "dir665:blue:status"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - blue-wps { + led-blue-wps { label = "dir665:blue:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - amber-status { + led-amber-status { label = "dir665:amber:status"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - blue-24g { + led-blue-24g { label = "dir665:blue:24g"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; @@ -176,15 +176,13 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts index d6b0f418fd01..d8279e0c4c4f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - blue-power { + led-blue-power { label = "dns320:blue:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - blue-usb { + led-blue-usb { label = "dns320:blue:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - orange-l_hdd { + led-orange-l_hdd { label = "dns320:orange:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - orange-r_hdd { + led-orange-r_hdd { label = "dns320:orange:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - orange-usb { + led-orange-usb { label = "dns320:orange:usb"; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */ }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts index 94d9c06cbbf5..7f396195e977 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - white-power { + led-white-power { label = "dns325:white:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - white-usb { + led-white-usb { label = "dns325:white:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ }; - red-l_hdd { + led-red-l_hdd { label = "dns325:red:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - red-r_hdd { + led-red-r_hdd { label = "dns325:red:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - red-usb { + led-red-usb { label = "dns325:red:usb"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi index 0738eb679fcd..20bcd031f3f5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi @@ -8,23 +8,21 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power &pmx_button_unmount &pmx_button_reset>; pinctrl-names = "default"; - power { + button-power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB unmount button"; linux,code = <KEY_EJECTCD>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts index 264938dfa4d9..090f1e2e5bb6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts @@ -42,12 +42,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_orange>; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts index 328516351e84..590bee3c561c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts @@ -85,15 +85,15 @@ &pmx_led_wifi_ap >; pinctrl-names = "default"; - bluetooth { + led-bluetooth { label = "dreamplug:blue:bluetooth"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "dreamplug:green:wifi"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wifi-ap { + led-wifi-ap { label = "dreamplug:green:wifi_ap"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts index d4cb3cd3e2a2..d5ac4e3974da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts @@ -85,44 +85,44 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - left0 { + led-left0 { label = "status:white:left0"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - left1 { + led-left1 { label = "status:white:left1"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - left2 { + led-left2 { label = "status:white:left2"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - left3 { + led-left3 { label = "status:white:left3"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - right0 { + led-right0 { label = "status:white:right0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; - right1 { + led-right1 { label = "status:white:right1"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - right2 { + led-right2 { label = "status:white:right2"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; - right3 { + led-right3 { label = "status:white:right3"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts index dfb41393941d..d5aa8b505cc0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts @@ -59,19 +59,19 @@ &pmx_led_wmode_r &pmx_led_wmode_g >; pinctrl-names = "default"; - health-r { + led-health-r { label = "guruplug:red:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - health-g { + led-health-g { label = "guruplug:green:health"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wmode-r { + led-wmode-r { label = "guruplug:red:wmode"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wmode-g { + led-wmode-g { label = "guruplug:green:wmode"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts index 962a910a6f5c..018c6b8f3e8a 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts @@ -58,17 +58,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; @@ -81,16 +79,16 @@ &pmx_led_usb_transfer>; pinctrl-names = "default"; - green-os { + led-green-os { label = "ib62x0:green:os"; gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - red-os { + led-red-os { label = "ib62x0:red:os"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; - usb-copy { + led-usb-copy { label = "ib62x0:red:usb_copy"; gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts index aed20185fd7a..91b46e77e0b6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts @@ -89,32 +89,32 @@ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power-blue { + led-power-blue { label = "power:blue"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - power-red { + led-power-red { label = "power:red"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - usb1 { + led-usb1 { label = "usb1:blue"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - usb2 { + led-usb2 { label = "usb2:blue"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - usb3 { + led-usb3 { label = "usb3:blue"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - usb4 { + led-usb4 { label = "usb4:blue"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - otb { + led-otb { label = "otb:blue"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; @@ -122,18 +122,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; - otb { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts index 2338f495d517..039362152650 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts @@ -127,44 +127,42 @@ &pmx_led_rebuild &pmx_led_health >; pinctrl-names = "default"; - power_led { + led-power-led { label = "status:white:power_led"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - rebuild_led { + led-rebuild-led { label = "status:white:rebuild_led"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; - health_led { + led-health-led { label = "status:red:health_led"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; - backup_led { + led-backup-led { label = "status:blue:backup_led"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_power &pmx_button_otb>; pinctrl-names = "default"; - Power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; - Reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; - OTB { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index c841eb8e7fb1..974bc9de4702 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -97,52 +97,52 @@ leds { compatible = "gpio-leds"; - status_green { + led-status-green { label = "l-50:green:status"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - status_red { + led-status-red { label = "l-50:red:status"; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "l-50:green:wifi"; gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; - internet_green { + led-internet-green { label = "l-50:green:internet"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; }; - internet_red { + led-internet-red { label = "l-50:red:internet"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; - usb1_green { + led-usb1-green { label = "l-50:green:usb1"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port3>; }; - usb1_red { + led-usb1-red { label = "l-50:red:usb1"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; - usb2_green { + led-usb2-green { label = "l-50:green:usb2"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port1>; }; - usb2_red { + led-usb2-red { label = "l-50:red:usb2"; gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; @@ -193,7 +193,7 @@ keys { compatible = "gpio-keys"; - factory_defaults { + button-factory-defaults { label = "factory_defaults"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts index 8c2b540eaf4f..90ea6cdee8e0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts @@ -51,7 +51,7 @@ gpio_keys { compatible = "gpio-keys"; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -61,11 +61,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "laplug_v2:red:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-power { + led-blue-power { label = "laplug_v2:blue:power"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi index b54c9980f636..8a11d2b9d449 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi @@ -88,8 +88,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts index 27fd6e2337d5..8a1c38ab6111 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts @@ -33,18 +33,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; pinctrl-names = "default"; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; @@ -56,12 +54,12 @@ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; pinctrl-names = "default"; - white-health { + led-white-health { label = "viper:white:health"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; - white-pulse { + led-white-pulse { label = "viper:white:pulse"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi index f80af24b9e90..5e0b139dd4fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi @@ -107,24 +107,22 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; - option { + button-option { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - reserved { + button-reserved { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; @@ -139,28 +137,28 @@ &pmx_led_function_blue>; pinctrl-names = "default"; - func_blue { + led-func-blue { label = "lsxl:blue:func"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - alarm { + led-alarm { label = "lsxl:red:alarm"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lsxl:amber:info"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lsxl:blue:power"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - func_red { + led-func-red { label = "lsxl:red:func"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts index e87ea7146546..6533b49a15b2 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts @@ -114,36 +114,36 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; - user1o { + led-user1o { label = "user1:orange"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user1g { + led-user1g { label = "user1:green"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0o { + led-user0o { label = "user0:orange"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0g { + led-user0g { label = "user0:green"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; - misc { + led-misc { label = "status:orange:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts index 5a77286136c7..e3b41784c876 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts @@ -73,17 +73,17 @@ pinctrl-0 = <&pmx_leds &pmx_usb_led>; pinctrl-names = "default"; - green-status { + led-green-status { label = "gtw:green:Status"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; }; - red-status { + led-red-status { label = "gtw:red:Status"; gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "gtw:green:USB"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; @@ -91,17 +91,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_keys>; pinctrl-names = "default"; - restart { + button-restart { label = "SWR Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi index b5737026e244..d4edf2727388 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi @@ -53,26 +53,24 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; /* * esc and power represent a three position rocker * switch. Thus the conventional KEY_POWER does not fit */ - exc { + button-exc { label = "Back power switch (on|auto)"; linux,code = <KEY_ESC>; linux,input-type = <5>; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Back power switch (auto|off)"; linux,code = <KEY_1>; linux,input-type = <5>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - option { + button-option { label = "Function button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi index 51530ea86622..d6b615cf6390 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi @@ -55,10 +55,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -68,7 +66,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "ns2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts index b0cb5907ed63..686bcd6f0f3c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts @@ -24,7 +24,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-sata { + led-blue-sata { label = "ns2:blue:sata"; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; linux,default-trigger = "disk-activity"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts index c1799a07816e..3555ac1c3b15 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts @@ -87,43 +87,43 @@ &pmx_led_hdd_green &pmx_led_hdd_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-red-usb { label = "nsa310:red:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts index b85e314f045a..ddf84092aade 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts @@ -75,39 +75,39 @@ gpio-leds { compatible = "gpio-leds"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts index 49da633a1bc0..47deb93c90a5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts @@ -35,24 +35,22 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts index 652405e65006..dd5c8ffc8781 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts @@ -142,39 +142,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa320:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa320:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa320:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa320:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa320:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa320:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa320:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa320:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa320:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts index 371456de34b2..f0786a5f2ce6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts @@ -162,39 +162,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa325:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa325:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa325:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa325:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa325:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa325:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa325:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa325:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa325:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi index ea3d36512e9f..e9bd9c551af5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi @@ -63,22 +63,20 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts index 8ea430168ea5..20c6290d2037 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts @@ -115,10 +115,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts index 946f0f453dd1..9c438f10f737 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts @@ -136,8 +136,6 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; button { label = "Init Button"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts index f9e95e55f36d..39a5345332da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts @@ -33,12 +33,12 @@ gpio-leds { compatible = "gpio-leds"; - health { + led-health { label = "pogo_e02:green:health"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "pogo_e02:orange:fault"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts index 5aa4669ae254..0e9c4cf79822 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts @@ -29,12 +29,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_eject>; pinctrl-names = "default"; - eject { + button-eject { debounce-interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; @@ -48,12 +46,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "pogoplugv4:green:health"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; default-state = "on"; }; - fault { + led-fault { label = "pogoplugv4:red:fault"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts index ae8f493c9a0f..eb185273376e 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&pmx_led_blue>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts index c73cc904e5c4..ce73fcf2255f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts @@ -28,13 +28,13 @@ pinctrl-0 = <&pmx_led_blue &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - misc { + led-misc { label = "sheevaplug:red:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi index 20964eb48fd7..6b7c5218b1fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi @@ -410,7 +410,7 @@ pinctrl-0 = <&pmx_alarmled_12>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:alarm"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; @@ -424,42 +424,42 @@ &pmx_hddled_26 &pmx_hddled_27>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; @@ -471,12 +471,12 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; @@ -488,22 +488,22 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; @@ -518,52 +518,52 @@ &pmx_hddled_45>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - hdd5-green { + led-hdd5-green { label = "synology:green:hdd5"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - hdd5-amber { + led-hdd5-amber { label = "synology:amber:hdd5"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; @@ -575,22 +575,22 @@ pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts index ad093324e075..a6e77a487d00 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts @@ -156,12 +156,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts index 30892c19aceb..a2e0ad4b84d8 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts index aba1205981f1..35be6bce1dba 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi index 717236853e45..f136059607b7 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi @@ -36,17 +36,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi index c2d87ba6190a..055ac754c5fd 100644 --- a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi @@ -48,8 +48,6 @@ / { gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts index 03471d30bfd9..12a4aac2633e 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts @@ -35,22 +35,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - front_button { + + button-front { label = "Front Push Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_on { + switch-power-rocker-sw-on { label = "Power rocker switch (on|auto)"; linux,input-type = <5>; /* EV_SW */ linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_off { + switch-power-rocker-sw-off { label = "Power rocker switch (auto|off)"; linux,input-type = <5>; /* EV_SW */ linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts index f17e25ac98dd..f81acb9b7223 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -39,9 +39,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_power_button>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - button@1 { + + button-1 { label = "Power-on Switch"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; @@ -53,7 +52,7 @@ pinctrl-0 = <&pmx_power_led>; pinctrl-names = "default"; - led@1 { + led-1 { label = "power:blue"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts index ee751995c8d0..79fee048c900 100644 --- a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts @@ -61,7 +61,7 @@ }; gpio_keys { - func { + func-button { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; @@ -90,7 +90,7 @@ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + func-led { label = "lschl:func:blue:top"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts index 2fbc17d6dfa4..e0da406c430f 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts @@ -74,22 +74,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - func { + + key-func { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - power { + key-power { label = "Power-on Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - autopower { + key-autopower { label = "Power-auto Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */ @@ -103,24 +102,24 @@ &pmx_led_power>; pinctrl-names = "default"; - alarm { + led-alarm { label = "lswsgl:alarm:red"; - gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lswsgl:info:amber"; - gpio = <&gpio0 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + led-func { label = "lswsgl:func:blue:top"; - gpio = <&gpio0 9 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lswsgl:power:blue:bottom"; - gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts index d57859998350..cb1bd24b7ae3 100644 --- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts @@ -35,15 +35,14 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + + key-power { label = "Power"; linux,code = <KEY_POWER>; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; - reset { + key-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts index fb203e7d37f5..d63ea15539aa 100644 --- a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts @@ -35,7 +35,7 @@ pinctrl-0 = <&pmx_reset_button>; pinctrl-names = "default"; - reset { + key-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts index fd78aa02a3c5..75ab913b21e5 100644 --- a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts +++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts @@ -32,7 +32,7 @@ pinctrl-0 = <&pmx_debug_led>; pinctrl-names = "default"; - led@0 { + led-0 { label = "rd88f5182:cpu"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mediatek/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts index 9c7325f18933..4c76366aa938 100644 --- a/arch/arm/boot/dts/mediatek/mt2701-evb.dts +++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts @@ -231,7 +231,7 @@ <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>, <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>, <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index f0b4a09004b3..814586abc297 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -1143,13 +1143,13 @@ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-clk { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; }; @@ -1167,14 +1167,14 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; bias-pull-down; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; }; pins-wp { @@ -1197,13 +1197,13 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; @@ -1211,7 +1211,7 @@ nand_pins_default: nanddefault { pins-ale { pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -1226,13 +1226,13 @@ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up; }; pins-we { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; }; diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi index a6e9cbf51524..0ee53d3ecd54 100644 --- a/arch/arm/boot/dts/nspire/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi @@ -55,7 +55,7 @@ }; / { - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x2000000>; /* 32 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts index 29f0181e5b38..debeff0ec010 100644 --- a/arch/arm/boot/dts/nspire/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire/nspire-cx.dts @@ -122,7 +122,7 @@ model = "TI-NSPIRE CX"; compatible = "ti,nspire-cx"; - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi index d56fef7250db..95588b716c6f 100644 --- a/arch/arm/boot/dts/nspire/nspire.dtsi +++ b/arch/arm/boot/dts/nspire/nspire.dtsi @@ -170,9 +170,12 @@ }; watchdog: watchdog@90060000 { - compatible = "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x90060000 0x1000>; interrupts = <3>; + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "wdog_clk", "apb_pclk"; + status = "disabled"; }; rtc: rtc@90090000 { diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index 5787ae95d3b4..1f07ba382910 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -525,7 +525,7 @@ }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -537,7 +537,7 @@ }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; @@ -549,7 +549,7 @@ }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -561,7 +561,7 @@ }; }; - i2c-bus@7 { + i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; @@ -580,7 +580,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@2 { + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -620,7 +620,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@0 { + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -632,7 +632,7 @@ }; }; - i2c-bus@1 { + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -691,7 +691,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@3 { + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -703,7 +703,7 @@ }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -715,7 +715,7 @@ }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; @@ -726,7 +726,7 @@ reg = <0x28>; }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts index baa39d0c1032..087f4ac43187 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts @@ -215,43 +215,43 @@ reg = <0x70>; i2c-mux-idle-disconnect; - i2c_slot1a: i2c-bus@0 { + i2c_slot1a: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_slot1b: i2c-bus@1 { + i2c_slot1b: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_slot2a: i2c-bus@2 { + i2c_slot2a: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_slot2b: i2c-bus@3 { + i2c_slot2b: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; - i2c_slot3: i2c-bus@4 { + i2c_slot3: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; }; - i2c_slot4: i2c-bus@5 { + i2c_slot4: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; }; - i2c_slot5: i2c-bus@6 { + i2c_slot5: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -265,24 +265,24 @@ #size-cells = <0>; i2c-mux-idle-disconnect; - i2c_m2_s1: i2c-bus@0 { + i2c_m2_s1: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_m2_s2: i2c-bus@1 { + i2c_m2_s2: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_m2_s3: i2c-bus@2 { + i2c_m2_s3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_m2_s4: i2c-bus@3 { + i2c_m2_s4: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 231c0d73a53e..92e291603ea1 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -99,6 +99,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-kontron-samx6i-ads2.dtb \ imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ imx6dl-mba6a.dtb \ @@ -207,6 +208,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ + imx6q-kontron-samx6i-ads2.dtb \ imx6q-kp-tpc.dtb \ imx6q-logicpd.dtb \ imx6q-marsboard.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi index 13756d39fb7b..0029c12f16c8 100644 --- a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + }; chosen { stdout-path = &uart1; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts index b61d55ca1467..de6b7607510a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts @@ -25,8 +25,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - lw700 { - native-mode; + native-mode = <&timing0>; + timing0: timing-lw700 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts index 16ff543f3fbf..f4a47e8348b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts @@ -89,7 +89,7 @@ status = "disabled"; display-timings { native-mode = <&timing1>; - timing1: claawvga { + timing1: timing-claawvga { clock-frequency = <27000000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts index 2bd0761c7e90..079bd3d14999 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts @@ -58,8 +58,8 @@ pinctrl-0 = <&pinctrl_lcd>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <30066000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts index 1353d985969c..ba0c62994f75 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts @@ -17,8 +17,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <31500000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts index 4d77b6077fc1..558751e730f3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts @@ -64,6 +64,7 @@ reg = <0>; lvds_decoder_in: endpoint { + data-mapping = "jeida-18"; remote-endpoint = <&lvds0_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index a7f77527269d..a02d77bb5672 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -67,7 +67,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -83,7 +83,7 @@ pixelclk-active = <0>; }; - ETV570 { + timing-etc570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -99,7 +99,7 @@ pixelclk-active = <0>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -115,7 +115,7 @@ pixelclk-active = <0>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -131,7 +131,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -147,7 +147,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -163,7 +163,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts index 6cdf2082c742..e10c179dbdb3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts @@ -191,7 +191,7 @@ display-timings { native-mode = <&lvds0_timing0>; - lvds0_timing0: hsd100pxn1 { + lvds0_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -207,7 +207,7 @@ pixelclk-active = <1>; }; - lvds0_timing1: nl12880bc20 { + lvds0_timing1: timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -233,7 +233,7 @@ display-timings { native-mode = <&lvds1_timing0>; - lvds1_timing0: hsd100pxn1 { + lvds1_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts index dfa6f64d43cc..c9b2ea2b24b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts @@ -82,11 +82,10 @@ compatible = "lg,lg4573"; spi-max-frequency = <10000000>; reg = <0>; - power-on-delay = <10>; display-timings { - 480x800p57 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p57 { clock-frequency = <27000027>; hactive = <480>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts index a5ac79346854..9ec038f1d0ff 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts @@ -36,8 +36,8 @@ status = "okay"; display-timings { - 480x800p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p60 { clock-frequency = <30000000>; hactive = <480>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts index 5a25bdbbeb68..b3129832f471 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts @@ -25,8 +25,8 @@ status = "okay"; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <33246000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..6a0c53f23a15 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi index a864fdbd5f16..5a9b819d7ee8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi @@ -7,6 +7,6 @@ #include "imx6qdl-kontron-samx6i.dtsi" / { - model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo"; compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..94c395cc020e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi index 4d6a0c3e8455..e76963436079 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi @@ -5,31 +5,8 @@ #include "imx6q.dtsi" #include "imx6qdl-kontron-samx6i.dtsi" -#include <dt-bindings/gpio/gpio.h> / { - model = "Kontron SMARC sAMX6i Quad/Dual"; + model = "Kontron SMARC-sAMX6i Quad/Dual"; compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; }; - -/* Quad/Dual SoMs have 3 chip-select signals */ -&ecspi4 { - cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>, - <&gpio3 25 GPIO_ACTIVE_LOW>; -}; - -&pinctrl_ecspi4 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - - /* SPI4_IMX_CS2# - connected to internal flash */ - MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 - /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 - /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ - MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 - >; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index 48ffb3ee01bd..082a2e3a391f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -485,7 +485,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 1eae438fbdae..8ec442038ea0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -482,7 +482,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index c2ec8572c8a5..9df9f79affae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -529,7 +529,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index 7cee983da669..7693f92195d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -584,7 +584,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index fbc704c064b6..9d0836df0fed 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -486,7 +486,7 @@ display-timings { native-mode = <&timing0>; - timing0: g101evn010 { + timing0: timing-g101evn010 { clock-frequency = <68930000>; hactive = <1280>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 070506279186..f4cb9e1d34a9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -551,7 +551,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi new file mode 100644 index 000000000000..b4a79245b7b6 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval + * 2.0 carrier (ADS2). + * + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + sound { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out Jack", + "Microphone", "Microphone Jack", + "Line", "Line In Jack"; + simple-audio-card,routing = + "Line Out Jack", "LINEOUTR", + "Line Out Jack", "LINEOUTL", + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN2L", "Microphone Jack", + "IN2R", "Microphone Jack"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + }; + + reg_codec_mic: regulator-codec-mic { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MIC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_codec_1p8v: regulator-codec-1p8v { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S0_CODEC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi4 { + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <100000000>; + m25p,fast-read; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "mclk"; + AVDD-supply = <®_codec_1p8v>; + CPVDD-supply = <®_codec_1p8v>; + DBVDD-supply = <®_codec_1p8v>; + DCVDD-supply = <®_codec_1p8v>; + MICVDD-supply = <®_codec_mic>; + }; +}; + +&i2c3 { + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&pcie { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi index 85aeebc9485d..99b5e78458aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi @@ -61,6 +61,18 @@ vin-supply = <®_smarc_suppy>; }; + reg_sdio: regulator-sdio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sdio>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + }; + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -137,7 +149,7 @@ status = "disabled"; }; - i2c_intern: i2c-gpio-intern { + i2c_intern: i2c-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_intern>; @@ -148,7 +160,7 @@ #size-cells = <0>; }; - i2c_lcd: i2c-gpio-lcd { + i2c_lcd: i2c-1 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; @@ -160,7 +172,7 @@ status = "disabled"; }; - i2c_cam: i2c-gpio-cam { + i2c_cam: i2c-2 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_cam>; @@ -178,7 +190,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | @@ -190,7 +202,7 @@ >; }; - audmux_adu3 { + mux-aud3 { fsl,audmux-port = <MX51_AUDMUX_PORT3>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -198,7 +210,7 @@ >; }; - audmux_ssi2 { + mux-ssi2 { fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | @@ -210,7 +222,7 @@ >; }; - audmux_adu4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -244,7 +256,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>; + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ @@ -259,7 +272,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; mdio { @@ -269,7 +282,7 @@ ethphy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; }; }; @@ -356,10 +369,6 @@ regulator-always-on; }; - /* - * Per schematics, of all VGEN's, only VGEN5 has some - * usage ... but even that - over DNI resistor - */ vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; @@ -380,8 +389,7 @@ regulator-max-microvolt = <3300000>; }; - reg_2p5v_s0: vgen5 { - regulator-name = "V_2V5_S0"; + vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -464,6 +472,8 @@ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 >; }; @@ -516,7 +526,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* RST_GBE0_PHY# */ >; }; @@ -642,6 +652,12 @@ >; }; + pinctrl_reg_sdio: reg-sdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 @@ -694,7 +710,6 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ >; }; @@ -728,8 +743,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; }; /* LCD_BKLT_PWM */ @@ -797,12 +811,12 @@ pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sdio>; no-1-8-v; }; /* SDMMC */ &usdhc4 { - /* Internal eMMC, optional on some boards */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; @@ -811,11 +825,13 @@ non-removable; vmmc-supply = <®_3p3v_s0>; vqmmc-supply = <®_1p8v_s0>; + status = "okay"; }; &wdog1 { /* CPLD is feeded by watchdog (hardwired) */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi index 238f3af42822..807f3c95e3ce 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi @@ -22,12 +22,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi index a587bc88f76f..789733a45b95 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi @@ -32,12 +32,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 6656e2e762a1..0a3deaf92eea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -786,7 +786,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi index 79f2354886b7..ded241a39906 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi @@ -110,7 +110,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -126,8 +126,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -143,8 +142,7 @@ pixelclk-active = <0>; }; - ET0350 { - u-boot,panel-name = "edt,et0350g0dh6"; + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -160,8 +158,7 @@ pixelclk-active = <0>; }; - ET0430 { - u-boot,panel-name = "edt,et0430g0dh6"; + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -177,7 +174,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -193,8 +190,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -210,7 +206,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; @@ -226,8 +222,7 @@ pixelclk-active = <0>; }; - CoMTFT { /* same as ET0700 but with inverted pixel clock */ - u-boot,panel-name = "edt,etm0700g0edh6"; + timing-comtft { /* same as ET0700 but with inverted pixel clock */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi index 2ca2eb37e14f..4eb53d5677a6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi @@ -127,8 +127,7 @@ }; display-timings { - hsd100pxn1 { - u-boot,panel-name = "hannstar,hsd100pxn1"; + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -142,7 +141,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -158,8 +157,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { - u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -175,8 +173,7 @@ pixelclk-active = <1>; }; - ET0700 { - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -192,8 +189,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -224,7 +220,7 @@ }; display-timings { - hsd100pxn1 { + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -238,7 +234,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -254,7 +250,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 1db146ac1c17..864173e30709 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -405,7 +405,7 @@ status = "okay"; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -421,7 +421,7 @@ pixelclk-active = <1>; }; - ETV570 { + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -437,7 +437,7 @@ pixelclk-active = <1>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -453,7 +453,7 @@ pixelclk-active = <1>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -469,7 +469,7 @@ pixelclk-active = <0>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -485,7 +485,7 @@ pixelclk-active = <1>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -501,7 +501,7 @@ pixelclk-active = <1>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 5485fe118dc4..d38183edf0fd 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -323,7 +323,6 @@ display-timings { native-mode = <&timing5>; timing0: timing0 { - panel-name = "VGA"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -340,7 +339,6 @@ }; timing1: timing1 { - panel-name = "ETV570"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -357,7 +355,6 @@ }; timing2: timing2 { - panel-name = "ET0350"; clock-frequency = <6500000>; hactive = <320>; vactive = <240>; @@ -374,7 +371,6 @@ }; timing3: timing3 { - panel-name = "ET0430"; clock-frequency = <9000000>; hactive = <480>; vactive = <272>; @@ -391,7 +387,6 @@ }; timing4: timing4 { - panel-name = "ET0500", "ET0700"; clock-frequency = <33260000>; hactive = <800>; vactive = <480>; @@ -408,7 +403,6 @@ }; timing5: timing5 { - panel-name = "ETQ570"; clock-frequency = <6400000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index e2e922bdc9e9..f06c6d425e91 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8026-samsung-matisse-wifi.dtb \ + qcom-apq8026-samsung-milletwifi.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -27,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8226-microsoft-dempsey.dtb \ qcom-msm8226-microsoft-makepeace.dtb \ qcom-msm8226-microsoft-moneypenny.dtb \ + qcom-msm8226-samsung-ms013g.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ @@ -41,12 +43,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-samsung-hlte.dtb \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-htc-m8.dtb \ qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ qcom-msm8974pro-samsung-kltechn.dtb \ + qcom-msm8974pro-sony-xperia-shinano-aries.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-msm8974pro-sony-xperia-shinano-leo.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts index 029e1b1659c9..5dbca83f2230 100644 --- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -96,6 +96,35 @@ }; }; +&blsp1_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_lvs1>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { status = "okay"; @@ -321,6 +350,30 @@ }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + reg_lcd_default: reg-lcd-default-state { pins = "gpio31", "gpio33"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts new file mode 100644 index 000000000000..7d519156d91d --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts @@ -0,0 +1,573 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Tab 4 8.0 Wi-Fi"; + compatible = "samsung,milletwifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + display0 = &framebuffer0; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <800>; + height = <1280>; + stride = <(800 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Cover"; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + enable-supply = <®_backlight_vddio>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + /* + * Change transition duration: 200ms, Change + * transition strength: heavy, PWM hysteresis: + * 1-bit w/ 8-bit resolution + */ + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + + /* + * PWM phase configuration: 3-phase/3 drivers + * (0, 120deg, 240deg, -, -, -), + * PWM frequency: 9616Hz (10-bit) + */ + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x34>; + }; + + /* + * Enable LED drivers 2 & 3, Boot inductor + * current limit: 1.5A/2.6A + */ + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xfa>; + }; + }; + }; + + reg_backlight_vddio: regulator-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "backlight_vddio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&backlight_vddio_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en1_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default_state>; + pinctrl-names = "default"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss_region: mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba_region: mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default_state>; + pinctrl-names = "default"; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + st,drdy-int-pin = <1>; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + charger@6a { + compatible = "summit,smb358"; + reg = <0x6a>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&charger_int_default_state>; + pinctrl-names = "default"; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,fast-voltage-threshold-microvolt = <3000000>; + summit,chip-temperature-threshold-celsius = <130>; + summit,usb-current-limit-microamp = <1500000>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&muic_int_default_state>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "melfas,mms252", "melfas,mms114"; + reg = <0x48>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + avdd-supply = <®_tsp_3p3v>; + vdd-supply = <®_tsp_1p8v>; + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-0 = <&tsp_int_rst_default_state>; + pinctrl-names = "default"; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_vddio_default_state: backlight-vddio-default-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + charger_int_default_state: charger-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default_state: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 11e60b74c3c9..769e151747c3 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -666,12 +666,12 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; - ranges; + tsens_calib: calib@404 { reg = <0x404 0x10>; }; @@ -684,7 +684,6 @@ compatible = "qcom,gcc-apq8064", "syscon"; reg = <0x00900000 0x4000>; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; clocks = <&cxo_board>, <&pxo_board>, @@ -993,7 +992,7 @@ reg = <0x1a400000 0x100>; }; - gpu: adreno-3xx@4300000 { + gpu: gpu@4300000 { compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi index ca53dff820ef..2b52e5d5eb51 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi @@ -245,7 +245,7 @@ reg = <0xfc190000 0x10000>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 0fb65f2bbcdf..56415ab34083 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -187,7 +187,6 @@ gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq4019"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; clocks = <&xo>, <&sleep_clk>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index f128510d8445..da0fd75f4711 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -372,7 +372,7 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; @@ -519,7 +519,6 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; tsens: thermal-sensor { compatible = "qcom,ipq8064-tsens"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index 34c60994d026..573feb3218c3 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -102,7 +102,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-mdm9615"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi index 525d8c608b06..8839b23fc693 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -287,6 +287,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts new file mode 100644 index 000000000000..2ecc5983d365 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Grand 2"; + compatible = "samsung,ms013g", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-home { + label = "Home Key"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; + + reserved-memory { + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; + + vibrator { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma255"; + reg = <0x18>; + interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdhc2_cd_default: sdhc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 270973e85625..b2f92ad6499a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -635,7 +635,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8226-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; @@ -1046,7 +1046,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-305.18", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 455ba4bf1bf4..a66c474cd1aa 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -113,7 +113,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8660"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&pxo_board>, <&cxo_board>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts index 0cbe2d2fbbb1..376a33125941 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -29,6 +29,10 @@ height = <1280>; stride = <(720 * 3)>; format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vdd-supply = <&pm8226_l28>; + vddio-supply = <&vddio_disp_vreg>; }; }; @@ -51,6 +55,18 @@ }; }; + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + vin-supply = <&pm8226_l8>; + pinctrl-0 = <&disp_vddio_default>; + pinctrl-names = "default"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -68,12 +84,67 @@ }; }; +&blsp1_i2c2 { + clock-frequency = <100000>; + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { + clock-frequency = <400000>; status = "okay"; + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + sensor@48 { compatible = "ti,tmp108"; reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; }; }; @@ -278,6 +349,56 @@ status = "okay"; }; +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + disp_vddio_default: disp-vddio-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 922f9e49468a..ebc43c5c6e5f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -47,9 +47,9 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x0 0x0>; + reg = <0x80000000 0>; }; cpu-pmu { @@ -129,7 +129,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index 4aaae8537a3f..fdb6e22986cf 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -182,7 +182,7 @@ status = "okay"; clock-frequency = <355000>; - led-controller@38 { + backlight: led-controller@38 { compatible = "ti,lm3630a"; status = "okay"; reg = <0x38>; @@ -272,6 +272,8 @@ reg = <0>; compatible = "lg,acx467akm-7"; + backlight = <&backlight>; + pinctrl-names = "default"; pinctrl-0 = <&panel_pin>; @@ -328,7 +330,7 @@ power-source = <PM8941_GPIO_S3>; }; - otg { + otg-hog { gpio-hog; gpios = <35 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts new file mode 100644 index 000000000000..903bb4d12513 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Samsung Galaxy Note 3"; + compatible = "samsung,hlte", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC3 SD card slot */ + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_pin_a>; + pinctrl-names = "default"; + + key-home { + label = "Home Key"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + touch_ldo: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "touch-ldo"; + + gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + + pinctrl-0 = <&touch_ldo_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8941_l10>; + vio-supply = <&touch_ldo>; + + pinctrl-0 = <&touch_pin>; + pinctrl-names = "default"; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio26"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio30"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_ldo_pin: touchscreen-ldo-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <PM8941_GPIO_S3>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l21>; + + pinctrl-0 = <&sdhc3_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 5651bb31bd54..15568579459a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -132,7 +132,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -219,7 +219,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -244,7 +244,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -269,7 +269,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -294,9 +294,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -343,9 +341,11 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8974-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; }; saw_l2: power-manager@f9012000 { @@ -757,7 +757,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; wcnss { @@ -1233,7 +1233,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x2100>; #address-cells = <1>; @@ -1576,7 +1576,7 @@ smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,smd-edge = <0>; label = "modem"; @@ -2129,7 +2129,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-330.1", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2213,7 +2213,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts new file mode 100644 index 000000000000..b896cc1ad6f7 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "HTC One (M8)"; + compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volume-down { + label = "volume_down"; + gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <20>; + wakeup-source; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <20>; + wakeup-source; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&boost_bypass_n_pin>; + pinctrl-names = "default"; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&smbb { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + bias-pull-up; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts new file mode 100644 index 000000000000..2621c5928b6a --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3 Compact"; + compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <2100000>; + qcom,fast-charge-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi index e129bb1bd6ec..6af7c71c7158 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi @@ -380,6 +380,8 @@ pm8941_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index 9a2ae282a46b..85261684b5d5 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -58,6 +58,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; tmu0: timer@e61e0000 { diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi index d55c344c1cd2..3a5d6b434d09 100644 --- a/arch/arm/boot/dts/renesas/r8a7742.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi @@ -1938,6 +1938,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi index d917c0a971f5..8833898d5557 100644 --- a/arch/arm/boot/dts/renesas/r8a7743.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi @@ -1846,6 +1846,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi index 754859c38a93..c66c1102fb72 100644 --- a/arch/arm/boot/dts/renesas/r8a7744.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi @@ -1832,6 +1832,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi index 168298300490..6ddde364782b 100644 --- a/arch/arm/boot/dts/renesas/r8a7745.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi @@ -1636,6 +1636,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi index 2375438d83c9..a8a12275c98a 100644 --- a/arch/arm/boot/dts/renesas/r8a77470.dtsi +++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi @@ -1061,6 +1061,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi index 583b74a9f071..20e4d4c6e748 100644 --- a/arch/arm/boot/dts/renesas/r8a7790.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi @@ -2012,6 +2012,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi index de08ceb62230..f9c9e1d8f669 100644 --- a/arch/arm/boot/dts/renesas/r8a7791.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi @@ -1938,6 +1938,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index 7defeb8e4cd1..dd3bc32668b7 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -990,5 +990,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi index d32a9d5d3faa..24e66ddf37e0 100644 --- a/arch/arm/boot/dts/renesas/r8a7793.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi @@ -1517,6 +1517,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi index f37f094cecc8..8e6386a79aea 100644 --- a/arch/arm/boot/dts/renesas/r8a7794.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi @@ -1484,6 +1484,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 45f60eeeaaa1..7548291c8d7e 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -316,6 +316,24 @@ data-width = <8>; }; + gmac1: ethernet@44000000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44000000 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC0>; + clock-names = "stmmaceth"; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + pcs-handle = <&mii_conv1>; + status = "disabled"; + }; + gmac2: ethernet@44002000 { compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; reg = <0x44002000 0x2000>; @@ -466,6 +484,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; usbphy: usb-phy { diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index 04af224005f8..96279d1e02fe 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -402,6 +402,7 @@ rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; + #sound-dai-cells = <0>; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts index 06790f05b395..4de9a45c4883 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts @@ -143,6 +143,14 @@ }; }; +&hdmi_sound { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi index 15cbd94d7ec0..5e0750547ab5 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi @@ -53,6 +53,22 @@ ports = <&vop0_out>, <&vop1_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "HDMI"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index fb98873fd94e..23e633387c24 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -216,6 +216,8 @@ <&cru ACLK_LCDC0>, <&cru HCLK_LCDC0>, <&cru PCLK_MIPI>, + <&cru PCLK_MIPIPHY>, + <&cru SCLK_MIPI_24M>, <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru ACLK_VIO0>, @@ -275,6 +277,43 @@ reg = <0>; remote-endpoint = <&hdmi_in_vop>; }; + + vop_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_vop>; + }; + }; + }; + + dsi: dsi@10110000 { + compatible = "rockchip,rk3128-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x10110000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI>; + clock-names = "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_VIO_MIPI_DSI>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi_in: port@0 { + reg = <0>; + + dsi_in_vop: endpoint { + remote-endpoint = <&vop_out_dsi>; + }; + }; + + dsi_out: port@1 { + reg = <1>; + }; }; }; @@ -360,6 +399,41 @@ status = "disabled"; }; + i2s_8ch: i2s@10200000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10200000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 14>, <&pdma 15>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif: spdif@10204000 { + compatible = "rockchip,rk3128-spdif", "rockchip,rk3066-spdif"; + reg = <0x10204000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&pdma 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + sfc: spi@1020c000 { + compatible = "rockchip,sfc"; + reg = <0x1020c000 0x8000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru 479>; + clock-names = "clk_sfc", "hclk_sfc"; + status = "disabled"; + }; + sdmmc: mmc@10214000 { compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -408,6 +482,21 @@ status = "disabled"; }; + i2s_2ch: i2s@10220000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10220000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + rockchip,playback-channels = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + nfc: nand-controller@10500000 { compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc"; reg = <0x10500000 0x4000>; @@ -477,6 +566,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; power-domains = <&power RK3128_PD_VIO>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -496,6 +586,18 @@ }; }; + dphy: phy@20038000 { + compatible = "rockchip,rk3128-dsi-dphy"; + reg = <0x20038000 0x4000>; + clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPIPHY>; + clock-names = "ref", "pclk"; + #phy-cells = <0>; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_MIPIPHY_P>; + reset-names = "apb"; + status = "disabled"; + }; + timer0: timer@20044000 { compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -1104,6 +1206,32 @@ }; }; + sfc { + sfc_bus2: sfc-bus2 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>; + }; + + sfc_bus4: sfc-bus4 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>, + <1 RK_PD2 3 &pcfg_pull_default>, + <1 RK_PD3 3 &pcfg_pull_default>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = <2 RK_PA2 2 &pcfg_pull_default>; + }; + + sfc_cs1: sfc-cs1 { + rockchip,pins = <2 RK_PA3 2 &pcfg_pull_default>; + }; + }; + spdif { spdif_tx: spdif-tx { rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts index 0c2396b8f8db..7707d1b01440 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts @@ -69,8 +69,7 @@ &mdio { phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x0>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_rst>; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 9fedd6776208..015903d09323 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp135f-dhcor-dhsbc.dtb \ stm32mp135f-dk.dtb \ stm32mp151a-prtt1a.dtb \ stm32mp151a-prtt1c.dtb \ diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi index 29302e74aa1d..35a55aef7f4b 100644 --- a/arch/arm/boot/dts/st/stih407-family.dtsi +++ b/arch/arm/boot/dts/st/stih407-family.dtsi @@ -33,7 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; @@ -52,8 +52,9 @@ clock-latency = <100000>; cpu0-supply = <&pwm_regulator>; st,syscfg = <&syscfg_core 0x8e0>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -66,6 +67,7 @@ 1200000 0 800000 0 500000 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi index 29e95e9d3229..a69231854f78 100644 --- a/arch/arm/boot/dts/st/stih410.dtsi +++ b/arch/arm/boot/dts/st/stih410.dtsi @@ -270,6 +270,7 @@ clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; cec@94a087c { diff --git a/arch/arm/boot/dts/st/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi index b35b9b7a7ccc..8fb8b3af5e49 100644 --- a/arch/arm/boot/dts/st/stih418.dtsi +++ b/arch/arm/boot/dts/st/stih418.dtsi @@ -6,23 +6,26 @@ #include "stih418-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpus { #address-cells = <1>; #size-cells = <0>; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; }; @@ -44,6 +47,38 @@ reset-names = "global", "port"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + + thermal-sensors = <&thermal>; + + trips { + cpu_crit: cpu-crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { rng11: rng@8a8a000 { status = "disabled"; @@ -107,12 +142,13 @@ assigned-clock-rates = <200000000>; }; - thermal@91a0000 { + thermal: thermal@91a0000 { compatible = "st,stih407-thermal"; reg = <0x91a0000 0x28>; clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/st/stm32f429.dtsi b/arch/arm/boot/dts/st/stm32f429.dtsi index 8efcda9ef8ae..ad91b74ddd0d 100644 --- a/arch/arm/boot/dts/st/stm32f429.dtsi +++ b/arch/arm/boot/dts/st/stm32f429.dtsi @@ -579,6 +579,7 @@ syscfg: syscon@40013800 { compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SYSCFG)>; }; exti: interrupt-controller@40013c00 { diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi index 32c5d8a1e06a..c9f588a65094 100644 --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi @@ -6,6 +6,14 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + /omit-if-no-ref/ + adc1_pins_a: adc1-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */ + }; + }; + + /omit-if-no-ref/ adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 { pins { pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ @@ -13,6 +21,241 @@ }; }; + /omit-if-no-ref/ + adc1_usb_cc_pins_b: adc1-usb-cc-pins-1 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1_INP11 */ + }; + }; + + /omit-if-no-ref/ + dcmipp_pins_a: dcmi-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, AF14)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, AF14)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, AF13)>;/* DCMI_D7 */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + dcmipp_sleep_pins_a: dcmi-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, ANALOG)>;/* DCMI_D7 */ + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_pins_a: eth1-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('A', 7, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth1_rmii_pins_a: eth1-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_pins_a: eth2-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth2_rmii_pins_a: eth2-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + goodix_pins_a: goodix-0 { + /* + * touchscreen reset needs to be configured + * via the pinctrl not the driver (a pull-down resistor + * has been soldered onto the reset line which forces + * the touchscreen to reset state). + */ + pins1 { + pinmux = <STM32_PINMUX('H', 2, GPIO)>; + output-high; + bias-pull-up; + }; + /* + * Interrupt line must have a pull-down resistor + * in order to freeze the i2c address at 0x5D + */ + pins2 { + pinmux = <STM32_PINMUX('F', 5, GPIO)>; + bias-pull-down; + }; + }; + + /omit-if-no-ref/ i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -23,6 +266,7 @@ }; }; + /omit-if-no-ref/ i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ @@ -30,6 +274,7 @@ }; }; + /omit-if-no-ref/ i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ @@ -40,6 +285,7 @@ }; }; + /omit-if-no-ref/ i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ @@ -47,6 +293,26 @@ }; }; + /omit-if-no-ref/ + i2c5_pins_b: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */ + }; + }; + + /omit-if-no-ref/ ltdc_pins_a: ltdc-0 { pins { pinmux = <STM32_PINMUX('D', 9, AF13)>, /* LCD_CLK */ @@ -77,6 +343,7 @@ }; }; + /omit-if-no-ref/ ltdc_sleep_pins_a: ltdc-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_CLK */ @@ -104,6 +371,51 @@ }; }; + /omit-if-no-ref/ + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 10, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 10, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */ + }; + }; + + /omit-if-no-ref/ + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 0, AF9)>; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF9)>; /* CAN2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 0, ANALOG)>, /* CAN2_TX */ + <STM32_PINMUX('E', 0, ANALOG)>; /* CAN2_RX */ + }; + }; + + /omit-if-no-ref/ mcp23017_pins_a: mcp23017-0 { pins { pinmux = <STM32_PINMUX('G', 12, GPIO)>; @@ -111,6 +423,7 @@ }; }; + /omit-if-no-ref/ pwm3_pins_a: pwm3-0 { pins { pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */ @@ -120,12 +433,14 @@ }; }; + /omit-if-no-ref/ pwm3_sleep_pins_a: pwm3-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */ }; }; + /omit-if-no-ref/ pwm4_pins_a: pwm4-0 { pins { pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ @@ -135,12 +450,31 @@ }; }; + /omit-if-no-ref/ pwm4_sleep_pins_a: pwm4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ }; }; + /omit-if-no-ref/ + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */ + }; + }; + + /omit-if-no-ref/ pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */ @@ -150,12 +484,31 @@ }; }; + /omit-if-no-ref/ pwm8_sleep_pins_a: pwm8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */ }; }; + /omit-if-no-ref/ + pwm13_pins_a: pwm13-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, AF9)>; /* TIM13_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm13_sleep_pins_a: pwm13-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, ANALOG)>; /* TIM13_CH1 */ + }; + }; + + /omit-if-no-ref/ pwm14_pins_a: pwm14-0 { pins { pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */ @@ -165,12 +518,107 @@ }; }; + /omit-if-no-ref/ pwm14_sleep_pins_a: pwm14-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */ }; }; + /omit-if-no-ref/ + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + /omit-if-no-ref/ + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + /omit-if-no-ref/ + qspi_bk1_pins_a: qspi-bk1-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, AF13)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, ANALOG)>; /* QSPI_BK1_IO3 */ + }; + }; + + /omit-if-no-ref/ + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, AF9)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + /omit-if-no-ref/ + sai1a_pins_a: sai1a-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1a_sleep_pins_a: sai1a-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A */ + }; + }; + + /omit-if-no-ref/ + sai1b_pins_a: sai1b-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1b_sleep_pins_a: sai1b-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */ + }; + }; + + /omit-if-no-ref/ sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -184,6 +632,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -202,6 +651,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ @@ -213,6 +663,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_clk_pins_a: sdmmc1-clk-0 { pins { pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ @@ -222,6 +673,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -235,6 +687,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -253,6 +706,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ @@ -264,6 +718,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_clk_pins_a: sdmmc2-clk-0 { pins { pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */ @@ -273,6 +728,80 @@ }; }; + /omit-if-no-ref/ + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, AF10)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + /omit-if-no-ref/ + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF6)>, /* SPI2_SCK */ + <STM32_PINMUX('H', 10, AF6)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi2_sleep_pins_a: spi2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* SPI2_SCK */ + <STM32_PINMUX('B', 5, ANALOG)>, /* SPI2_MISO */ + <STM32_PINMUX('H', 10, ANALOG)>; /* SPI2_MOSI */ + }; + }; + + /omit-if-no-ref/ + spi3_pins_a: spi3-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */ + <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi3_sleep_pins_a: spi3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */ + }; + }; + + /omit-if-no-ref/ spi5_pins_a: spi5-0 { pins1 { pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */ @@ -288,6 +817,7 @@ }; }; + /omit-if-no-ref/ spi5_sleep_pins_a: spi5-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */ @@ -296,6 +826,7 @@ }; }; + /omit-if-no-ref/ stm32g0_intn_pins_a: stm32g0-intn-0 { pins { pinmux = <STM32_PINMUX('I', 2, GPIO)>; @@ -303,6 +834,7 @@ }; }; + /omit-if-no-ref/ uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ @@ -316,6 +848,7 @@ }; }; + /omit-if-no-ref/ uart4_idle_pins_a: uart4-idle-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ @@ -326,6 +859,7 @@ }; }; + /omit-if-no-ref/ uart4_sleep_pins_a: uart4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ @@ -333,6 +867,84 @@ }; }; + /omit-if-no-ref/ + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_idle_pins_b: uart4-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_sleep_pins_b: uart4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + /omit-if-no-ref/ + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_idle_pins_a: uart7-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_sleep_pins_a: uart7-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */ + <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + }; + + /omit-if-no-ref/ uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -346,6 +958,7 @@ }; }; + /omit-if-no-ref/ uart8_idle_pins_a: uart8-idle-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ @@ -356,6 +969,7 @@ }; }; + /omit-if-no-ref/ uart8_sleep_pins_a: uart8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ @@ -363,6 +977,7 @@ }; }; + /omit-if-no-ref/ usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ @@ -378,6 +993,7 @@ }; }; + /omit-if-no-ref/ usart1_idle_pins_a: usart1-idle-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -395,6 +1011,7 @@ }; }; + /omit-if-no-ref/ usart1_sleep_pins_a: usart1-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -404,6 +1021,40 @@ }; }; + /omit-if-no-ref/ + usart1_pins_b: usart1-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* USART1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('D', 14, ANALOG)>; /* USART1_RX */ + }; + }; + + /omit-if-no-ref/ usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ @@ -419,6 +1070,7 @@ }; }; + /omit-if-no-ref/ usart2_idle_pins_a: usart2-idle-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -436,6 +1088,7 @@ }; }; + /omit-if-no-ref/ usart2_sleep_pins_a: usart2-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -444,4 +1097,48 @@ <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ }; }; + + /omit-if-no-ref/ + usart2_pins_b: usart2-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, AF1)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, AF3)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_idle_pins_b: usart2-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index 6704ceef284d..e1a764d269d2 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -979,6 +979,12 @@ ts_cal2: calib@5e { reg = <0x5e 0x2>; }; + ethernet_mac1_address: mac1@e4 { + reg = <0xe4 0x6>; + }; + ethernet_mac2_address: mac2@ea { + reg = <0xea 0x6>; + }; }; etzpc: bus@5c007000 { @@ -1505,6 +1511,38 @@ status = "disabled"; }; + ethernet1: ethernet@5800a000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <&exti 68 1>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH1MAC>, + <&rcc ETH1TX>, + <&rcc ETH1RX>, + <&rcc ETH1STP>, + <&rcc ETH1CK_K>; + st,syscon = <&syscfg 0x4 0xff0000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_1>; + snps,tso; + access-controllers = <&etzpc 48>; + status = "disabled"; + + stmmac_axi_config_1: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi index 3e394c8e58b9..73e470019ce4 100644 --- a/arch/arm/boot/dts/st/stm32mp133.dtsi +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi @@ -68,4 +68,35 @@ }; }; }; + + ethernet2: ethernet@5800e000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800e000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH2MAC>, + <&rcc ETH2TX>, + <&rcc ETH2RX>, + <&rcc ETH2STP>, + <&rcc ETH2CK_K>; + st,syscon = <&syscfg 0x4 0xff000000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_2>; + snps,tso; + access-controllers = <&etzpc 49>; + status = "disabled"; + + stmmac_axi_config_2: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts new file mode 100644 index 000000000000..bacb70b4256b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + * + * DHCOR STM32MP13 variant: + * DHCR-STM32MP135F-C100-R051-EE-F0409-SPI4-RTC-WBT-I-01LG + * DHCOR PCB number: 718-100 or newer + * DHSBC PCB number: 719-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13xx-dhcor-som.dtsi" + +/ { + model = "DH electronics STM32MP135F DHCOR DHSBC"; + compatible = "dh,stm32mp135f-dhcor-dhsbc", + "dh,stm32mp135f-dhcor-som", + "st,stm32mp135"; + + aliases { + ethernet0 = ðernet1; + ethernet1 = ðernet2; + serial2 = &usart1; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_pins_a &adc1_usb_cc_pins_b>; + vdda-supply = <&vdd_adc>; + vref-supply = <&vdd_adc>; + status = "okay"; + + adc1: adc@0 { + status = "okay"; + + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in2 & in11. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + * + * The pinmux pins must be set as ANALOG, use datasheet + * DS13483 Table 7. STM32MP135C/F ball definitions to + * find out which 'pin name' maps to which 'additional + * functions', which lists the mapping between pin and + * ADC channel. In this case, PA5 maps to ADC1_INP2 and + * PF13 maps to ADC1_INP11 . + */ + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; + + channel@11 { + reg = <11>; + st,min-sample-time-ns = <5000>; + }; + + /* Expansion connector: INP12:pin29 */ + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +ðernet1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð1_rgmii_pins_a>; + pinctrl-1 = <ð1_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy1: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet2 { + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy2: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "", "DHSBC_USB_PWR_CC1", "", "", + "", "", "", "DHSBC_nETH1_RST", + "", "DHCOR_HW-CODING_0", "", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOR_BT_HOST_WAKE", + "", "", "", "", + "", "DHSBC_nTPM_CS", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "DHSBC_USB_5V_MEAS", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "DHCOR_RAM-CODING_0", "", "", + "", "DHCOR_RAM-CODING_1", "", "", + "", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "DHSBC_nTPM_RST", "", "", + "DHSBC_nTPM_PIRQ", "", "DHCOR_WL_HOST_WAKE", ""; +}; + +&gpiof { + gpio-line-names = "", "", "DHSBC_USB_PWR_nFLT", "", + "", "", "", "", + "", "", "", "", + "DHCOR_WL_REG_ON", "DHSBC_USB_PWR_CC2", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHSBC_nETH2_RST", "DHCOR_BT_DEV_WAKE", "", "", + "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB"; +}; + +&gpioi { + gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1", + "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT", + "DHSBC_BOOT0", "DHSBC_BOOT1", + "DHSBC_BOOT2", "DHSBC_USB-C_DATA_VBUS"; +}; + +&i2c1 { /* Expansion connector: SDA:pin27 SCL:pin28 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { /* Expansion connector: SDA:pin3 SCL:pin5 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_b>; + pinctrl-1 = <&i2c5_sleep_pins_b>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&m_can1 { /* Expansion connector: TX:pin16 RX:pin18 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { /* Expansion connector: TX:pin22 RX:pin26 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + status = "okay"; +}; + +&sai1 { /* Expansion connector: SCK-A:pin12 FS-A:pin35 SD-A:pin38 SD-B:pin40 */ + clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai1a_pins_a &sai1b_pins_a>; + pinctrl-1 = <&sai1a_sleep_pins_a &sai1b_sleep_pins_a>; +}; + +&scmi_voltd { + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_pins_a>; + pinctrl-1 = <&spi2_sleep_pins_a>; + cs-gpios = <&gpiob 13 0>; + status = "okay"; + + st33htph: tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&spi3 { /* Expansion connector: MOSI:pin19 MISO:pin21 SCK:pin22 nCS:pin24 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_pins_a>; + pinctrl-1 = <&spi3_sleep_pins_a>; + cs-gpios = <&gpiof 3 0>; + status = "disabled"; +}; + +&timers5 { /* Expansion connector: CH3:pin31 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers13 { /* Expansion connector: CH1:pin32 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm13_pins_a>; + pinctrl-1 = <&pwm13_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@12 { + status = "okay"; + }; +}; + +&usart1 { /* Expansion connector: RX:pin33 TX:pin37 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b>; + pinctrl-1 = <&usart1_sleep_pins_b>; + pinctrl-2 = <&usart1_idle_pins_b>; + status = "okay"; +}; + +&usart2 { /* Expansion connector: RX:pin10 TX:pin8 RTS:pin11 CTS:pin36 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_b>; + pinctrl-1 = <&usart2_sleep_pins_b>; + pinctrl-2 = <&usart2_idle_pins_b>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb33d-supply = <&usb33>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + vbus-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>; + label = "Type-C"; + self-powered; + type = "micro"; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 567e53ad285f..1af335a39993 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -19,6 +19,7 @@ compatible = "st,stm32mp135f-dk", "st,stm32mp135"; aliases { + ethernet0 = ðernet1; serial0 = &uart4; serial1 = &usart1; serial2 = &uart8; @@ -29,6 +30,20 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_mco1: clk-mco1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -141,6 +156,45 @@ status = "okay"; }; +&dcmipp { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmipp_pins_a>; + pinctrl-1 = <&dcmipp_sleep_pins_a>; + status = "okay"; + + port { + dcmipp_0: endpoint { + remote-endpoint = <&mipid02_2>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + }; + }; +}; + +ðernet1 { + status = "okay"; + pinctrl-0 = <ð1_rmii_pins_a>; + pinctrl-1 = <ð1_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + phy-handle = <&phy0_eth1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0_eth1: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c131"; + reg = <0>; + reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; @@ -201,6 +255,76 @@ /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; + + stmipi: csi2rx@14 { + compatible = "st,st-mipid02"; + reg = <0x14>; + clocks = <&clk_mco1>; + clock-names = "xclk"; + VDDE-supply = <&scmi_v1v8_periph>; + VDDIN-supply = <&scmi_v1v8_periph>; + reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + mipid02_0: endpoint { + data-lanes = <1 2>; + lane-polarities = <0 0 0>; + remote-endpoint = <&gc2145_ep>; + }; + }; + port@2 { + reg = <2>; + + mipid02_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmipp_0>; + }; + }; + }; + }; + + gc2145: camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + iovdd-supply = <&scmi_v3v3_sw>; + avdd-supply = <&scmi_v3v3_sw>; + dvdd-supply = <&scmi_v3v3_sw>; + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + port { + gc2145_ep: endpoint { + remote-endpoint = <&mipid02_0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <120000000 192000000 240000000>; + }; + }; + }; + + goodix: goodix-ts@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&goodix_pins_a>; + interrupt-parent = <&gpiof>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&scmi_v3v3_sw>; + VDDIO-supply = <&scmi_v3v3_sw>; + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + status = "okay" ; + }; }; &iwdg2 { @@ -273,6 +397,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */ pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -288,6 +413,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */ pinctrl-0 = <&pwm4_pins_a>; pinctrl-1 = <&pwm4_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -303,6 +429,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */ pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -316,6 +443,7 @@ &timers14 { status = "disabled"; pwm { + /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */ pinctrl-0 = <&pwm14_pins_a>; pinctrl-1 = <&pwm14_sleep_pins_a>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi new file mode 100644 index 000000000000..ddad6497775b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "DH electronics STM32MP13xx DHCOR SoM"; + compatible = "dh,stm32mp131a-dhcor-som", + "st,stm32mp131"; + + aliases { + mmc0 = &sdmmc2; + mmc1 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + rtc0 = &rv3032; + spi0 = &qspi; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>; + }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&vin>; + ldo2-supply = <&vin>; + ldo3-supply = <&vin>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; + ldo6-supply = <&vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcpu: buck1 { /* VDD_CPU_1V2 */ + regulator-name = "vddcpu"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { /* VDD_DDR_1V35 */ + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { /* VDD_3V3_1V8 */ + regulator-name = "vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vddcore: buck4 { /* VDD_CORE_1V2 */ + regulator-name = "vddcore"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_adc: ldo1 { /* VDD_ADC_1V8 */ + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */ + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vdd_ldo3: ldo3 { /* LDO3_OUT */ + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO3 0>; + }; + + vdd_usb: ldo4 { /* VDD_USB_3V3 */ + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */ + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO5 0>; + }; + + vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */ + regulator-name = "vdd_sd2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { /* VREF_DDR_0V675 */ + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { /* BST_OUT_5V2 */ + regulator-name = "bst_out"; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; /* ST M24256 */ + reg = <0x50>; + pagesize = <64>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +/* Console UART */ +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_b>; + pinctrl-1 = <&uart4_sleep_pins_b>; + pinctrl-2 = <&uart4_idle_pins_b>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +/* Bluetooth */ +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_a>; + pinctrl-1 = <&uart7_sleep_pins_a>; + pinctrl-2 = <&uart7_idle_pins_a>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt"; + max-speed = <3000000>; + device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SDIO WiFi */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + mmc-pwrseq = <&sdio_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 1YN */ + reg = <1>; + compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac"; + interrupt-parent = <&gpioe>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +/* eMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + bus-width = <8>; + mmc-ddr-3_3v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index 90c5c72c87ab..4f878ec102c1 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -50,6 +50,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&intc>; + arm,no-tick-in-suspend; }; clocks { diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts index 306e1bc2a514..847b360f02fc 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts @@ -62,6 +62,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts index 956da5f26c1c..43280289759d 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts @@ -68,6 +68,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts index 8e4b0db198c2..6f27d794d270 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts @@ -67,6 +67,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts index 72b9cab2d990..6ae391bffee5 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts @@ -72,6 +72,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts index 527c33be66cc..36e6055b5665 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts @@ -147,11 +147,6 @@ status = "okay"; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - &rtc { status = "okay"; }; @@ -211,11 +206,3 @@ &usbphyc { status = "okay"; }; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index cfaf8adde319..c87fd96cbd91 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -379,11 +379,6 @@ baseboard_eeprom: &sip_eeprom { }; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - &rtc { status = "okay"; }; @@ -590,14 +585,6 @@ baseboard_eeprom: &sip_eeprom { status = "okay"; }; -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - &vrefbuf { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi index aeb71c41a734..2022a1fa31ca 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi @@ -214,3 +214,16 @@ &rng1 { status = "okay"; }; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/ti/davinci/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts index 6c5936278e75..1f5cd35f8b74 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-evm.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts @@ -65,7 +65,7 @@ display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <9000000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts index 56e5d954a490..4b070e634b28 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts @@ -74,7 +74,7 @@ pinctrl-1 = <&lcd_pins_sleep>; display-timings { - 320x240 { + timing-320x240 { hactive = <320>; vactive = <240>; hback-porch = <68>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index f38f5bff2b96..17574d0d0525 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -67,7 +67,7 @@ }; display-timings { - 240x320p16 { + timing-240x320p16 { clock-frequency = <6500000>; hactive = <240>; vactive = <320>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts index d5a4a21889d1..e7d561a527fd 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts @@ -202,7 +202,7 @@ }; display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <18400000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index eb1ec85aba28..e6a18954e449 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -196,7 +196,6 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - ti,enable-id-detection; id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts index e9f55bd30bd4..38a2da5e2c5d 100644 --- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts @@ -16,7 +16,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi index b7e09eff5bb2..f23cb5ee11ae 100644 --- a/arch/arm/boot/dts/vt8500/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi @@ -115,7 +115,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts index 2d77c087676e..8ce9e2ef0a81 100644 --- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts +++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts @@ -16,7 +16,7 @@ bits-per-pixel = <32>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi index 168cd12b07bc..d9e1280372c5 100644 --- a/arch/arm/boot/dts/vt8500/wm8505.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi @@ -213,7 +213,7 @@ interrupts = <1>; }; - uhci@d8007300 { + usb@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; interrupts = <0>; diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts index f6a42149a0a0..7977b6c1e8eb 100644 --- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts +++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts @@ -17,7 +17,7 @@ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi index bc057b6f7d16..35d12d77efc0 100644 --- a/arch/arm/boot/dts/vt8500/wm8650.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi @@ -185,7 +185,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi index 33aeb37491f4..b292f85d4e69 100644 --- a/arch/arm/boot/dts/vt8500/wm8750.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi @@ -257,13 +257,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts index c7a6fe0ce48f..5d409323b10c 100644 --- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts @@ -28,7 +28,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi index 65c9271050e6..c61717ebb4f1 100644 --- a/arch/arm/boot/dts/vt8500/wm8850.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi @@ -244,13 +244,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 30dd6347a929..21cd3a87f385 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 subdir-y += actions +subdir-y += airoha subdir-y += allwinner subdir-y += altera subdir-y += amazon diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile new file mode 100644 index 000000000000..ebea112ce1d7 --- /dev/null +++ b/arch/arm64/boot/dts/airoha/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts new file mode 100644 index 000000000000..cf58e43dd5b2 --- /dev/null +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +/* Bootloader installs ATF here */ +/memreserve/ 0x80000000 0x200000; + +#include "en7581.dtsi" + +/ { + model = "Airoha EN7581 Evaluation Board"; + compatible = "airoha,en7581-evb", "airoha,en7581"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi new file mode 100644 index 000000000000..55eb1762fb11 --- /dev/null +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + npu-binary@84000000 { + no-map; + reg = <0x0 0x84000000 0x0 0xa00000>; + }; + + npu-flag@84b0000 { + no-map; + reg = <0x0 0x84b00000 0x0 0x100000>; + }; + + npu-pkt@85000000 { + no-map; + reg = <0x0 0x85000000 0x0 0x1a00000>; + }; + + npu-phyaddr@86b00000 { + no-map; + reg = <0x0 0x86b00000 0x0 0x100000>; + }; + + npu-rxdesc@86d00000 { + no-map; + reg = <0x0 0x86d00000 0x0 0x100000>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@9000000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x09000000 0x0 0x20000>, + <0x0 0x09080000 0x0 0x80000>, + <0x0 0x09400000 0x0 0x2000>, + <0x0 0x09500000 0x0 0x2000>, + <0x0 0x09600000 0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + uart1: serial@1fbf0000 { + compatible = "ns16550"; + reg = <0x0 0x1fbf0000 0x0 0x30>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <1843200>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 596a25907432..709fe650a360 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -5,7 +5,7 @@ #include "sun50i-a64-sopine-baseboard.dts" / { - model = "Pine64 LTS"; + model = "Pine64 PINE A64 LTS"; compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index b54099b654c8..026d843cd7e0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -4,7 +4,7 @@ #include "sun50i-a64-pine64.dts" / { - model = "Pine64+"; + model = "Pine64 PINE A64+"; compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; /* TODO: Camera, touchscreen, etc. */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 2accb5ddf783..09e71fd60785 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -9,7 +9,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Pine64"; + model = "Pine64 PINE A64"; compatible = "pine64,pine64", "allwinner,sun50i-a64"; aliases { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 6c65d5bc16ba..379c2c8466f5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -13,7 +13,7 @@ #include <dt-bindings/pwm/pwm.h> / { - model = "Pinebook"; + model = "Pine64 Pinebook"; compatible = "pine64,pinebook", "allwinner,sun50i-a64"; chassis-type = "laptop"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts index 6265360ce623..86cc85eb3d48 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts @@ -9,7 +9,7 @@ #include "sun50i-a64-pinetab.dts" / { - model = "PineTab, Early Adopter's version"; + model = "Pine64 PineTab Early Adopter"; compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index c6007df99938..f5fb1ee32dad 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -14,7 +14,7 @@ #include <dt-bindings/pwm/pwm.h> / { - model = "PineTab, Development Sample"; + model = "Pine64 PineTab Developer Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; chassis-type = "tablet"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 5e66ce1a334f..be2347c8f267 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -8,7 +8,7 @@ #include "sun50i-a64-sopine.dtsi" / { - model = "SoPine with baseboard"; + model = "Pine64 SOPINE on Baseboard carrier board"; compatible = "pine64,sopine-baseboard", "pine64,sopine", "allwinner,sun50i-a64"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index ce4aa44c3353..e868ca5ae753 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -51,10 +51,16 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; - next-level-cache = <&L2>; clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu1: cpu@1 { @@ -62,10 +68,16 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; - next-level-cache = <&L2>; clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu2: cpu@2 { @@ -73,10 +85,16 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; - next-level-cache = <&L2>; clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu3: cpu@3 { @@ -84,16 +102,25 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; - next-level-cache = <&L2>; clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; - L2: l2-cache { + l2_cache: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts index 66fe03910d5e..066fbeff8bfa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -8,7 +8,7 @@ /delete-node/ ®_gmac_3v3; / { - model = "Pine H64 model B"; + model = "Pine64 PINE H64 Model B"; compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; wifi_pwrseq: pwrseq { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 3910393be1f9..c8b275552872 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -9,7 +9,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Pine H64 model A"; + model = "Pine64 PINE H64 Model A"; compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; aliases { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 8a8591c4e7dd..2301c59b41b1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -29,6 +29,13 @@ clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu1: cpu@1 { @@ -39,6 +46,13 @@ clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu2: cpu@2 { @@ -49,6 +63,13 @@ clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu3: cpu@3 { @@ -59,6 +80,22 @@ clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; + }; + + l2_cache: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi index aca22a7f0191..dd10aaf472b6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi @@ -11,7 +11,7 @@ opp-hz = /bits/ 64 <480000000>; opp-microvolt = <900000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; + opp-supported-hw = <0x3f>; }; opp-600000000 { @@ -25,7 +25,7 @@ opp-hz = /bits/ 64 <720000000>; opp-microvolt = <900000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; + opp-supported-hw = <0x2d>; }; opp-792000000 { @@ -50,8 +50,16 @@ opp-microvolt-speed2 = <950000>; opp-microvolt-speed3 = <950000>; opp-microvolt-speed4 = <1020000>; + opp-microvolt-speed5 = <900000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; + opp-supported-hw = <0x3f>; + }; + + opp-1032000000 { + opp-hz = /bits/ 64 <1032000000>; + opp-microvolt = <900000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + opp-supported-hw = <0x20>; }; opp-1104000000 { @@ -59,8 +67,9 @@ opp-microvolt-speed0 = <1000000>; opp-microvolt-speed2 = <1000000>; opp-microvolt-speed3 = <1000000>; + opp-microvolt-speed5 = <950000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; + opp-supported-hw = <0x2d>; }; opp-1200000000 { @@ -70,8 +79,9 @@ opp-microvolt-speed2 = <1050000>; opp-microvolt-speed3 = <1050000>; opp-microvolt-speed4 = <1100000>; + opp-microvolt-speed5 = <1020000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x1f>; + opp-supported-hw = <0x3f>; }; opp-1320000000 { @@ -85,15 +95,16 @@ opp-hz = /bits/ 64 <1416000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0d>; + opp-supported-hw = <0x2d>; }; opp-1512000000 { opp-hz = /bits/ 64 <1512000000>; opp-microvolt-speed1 = <1100000>; opp-microvolt-speed3 = <1100000>; + opp-microvolt-speed5 = <1160000>; clock-latency-ns = <244144>; /* 8 32k periods */ - opp-supported-hw = <0x0a>; + opp-supported-hw = <0x2a>; }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index 921d5f61d8d6..b29ce7321317 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -27,6 +27,13 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu1: cpu@1 { @@ -36,6 +43,13 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu2: cpu@2 { @@ -45,6 +59,13 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; }; cpu3: cpu@3 { @@ -54,6 +75,22 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache>; + }; + + l2_cache: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; }; }; @@ -113,6 +150,16 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h616-crypto"; + reg = <0x01904000 0x800>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, + <&ccu CLK_MBUS_CE>, <&rtc CLK_IOSC>; + clock-names = "bus", "mod", "ram", "trng"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h616-system-control"; reg = <0x03000000 0x1000>; @@ -306,6 +353,15 @@ #interrupt-cells = <3>; }; + iommu: iommu@30f0000 { + compatible = "allwinner,sun50i-h616-iommu"; + reg = <0x030f0000 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_IOMMU>; + resets = <&ccu RST_BUS_IOMMU>; + #iommu-cells = <1>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h616-mmc", "allwinner,sun50i-a100-mmc"; @@ -589,6 +645,17 @@ status = "disabled"; }; + gpadc: adc@5070000 { + compatible = "allwinner,sun50i-h616-gpadc", + "allwinner,sun20i-d1-gpadc"; + reg = <0x05070000 0x400>; + clocks = <&ccu CLK_BUS_GPADC>; + resets = <&ccu RST_BUS_GPADC>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #io-channel-cells = <1>; + }; + ths: thermal-sensor@5070400 { compatible = "allwinner,sun50i-h616-ths"; reg = <0x05070400 0x400>; @@ -602,6 +669,16 @@ #thermal-sensor-cells = <1>; }; + lradc: lradc@5070800 { + compatible = "allwinner,sun50i-h616-lradc", + "allwinner,sun50i-r329-lradc"; + reg = <0x05070800 0x400>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_KEYADC>; + resets = <&ccu RST_BUS_KEYADC>; + status = "disabled"; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts index ee30584b6ad7..afb49e65859f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "sun50i-h616.dtsi" - +#include "sun50i-h616-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -221,7 +221,7 @@ reg_dcdc1: dcdc1 { regulator-always-on; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1160000>; regulator-name = "vdd-cpu"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts index 63036256917f..ff453336eab1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts @@ -9,6 +9,78 @@ / { model = "Anbernic RG35XX H"; compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700"; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_pin>; + pinctrl-names = "default"; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <4096 0>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <0 4096>; + linux,code = <ABS_Y>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <0 4096>; + linux,code = <ABS_RX>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <4096 0>; + linux,code = <ABS_RY>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "left_y", "right_x", "right_y"; + #io-channel-cells = <1>; + io-channels = <&gpadc 0>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&pio 8 1 GPIO_ACTIVE_LOW>, + <&pio 8 2 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; +}; + +&gpadc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@0 { + reg = <0>; + }; }; &gpio_keys_gamepad { @@ -34,3 +106,10 @@ &ohci1 { status = "okay"; }; + +&pio { + joy_mux_pin: joy-mux-pin { + pins = "PI0"; + function = "gpio_out"; + }; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index cbbc53c47921..0def0b0daaf7 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -34,6 +34,7 @@ compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&l2_shared>; reg = <0x0>; }; @@ -41,6 +42,7 @@ compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&l2_shared>; reg = <0x1>; }; @@ -48,6 +50,7 @@ compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&l2_shared>; reg = <0x2>; }; @@ -55,8 +58,15 @@ compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&l2_shared>; reg = <0x3>; }; + + l2_shared: cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; }; firmware { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 26173f0b0051..4eee777ef1a1 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -180,8 +180,6 @@ &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 81d0e914a77c..7c53cb9621e5 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -169,8 +169,6 @@ &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0f29517da5ec..29417f04f886 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb @@ -62,6 +64,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-vero4k.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxlx-s905l-p271.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi index 73ca1d7eed81..de10e7aebf21 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi @@ -4,6 +4,7 @@ */ #include "amlogic-a4-common.dtsi" +#include <dt-bindings/power/amlogic,a4-pwrc.h> / { cpus { #address-cells = <2>; @@ -37,4 +38,13 @@ enable-method = "psci"; }; }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,a4-pwrc"; + #power-domain-cells = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 32a754fe7990..f8fb060c49ae 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -111,8 +111,7 @@ }; gpio_intc: interrupt-controller@4080 { - compatible = "amlogic,meson-gpio-intc", - "amlogic,c3-gpio-intc"; + compatible = "amlogic,c3-gpio-intc", "amlogic,meson-gpio-intc"; reg = <0x0 0x4080 0x0 0x0020>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts index 4bc30af05848..0d92f5253b64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "meson-a1.dtsi" +#include <dt-bindings/thermal/thermal.h> / { compatible = "amlogic,ad402", "amlogic,a1"; @@ -83,6 +84,50 @@ vin-supply = <&vddao_3v3>; regulator-always-on; }; + + thermal-zones { + soc_thermal: soc-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <130>; + + thermal-sensors = <&cpu_temp>; + + trips { + soc_passive: soc-passive { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <85000>; + hysteresis = <5000>; + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + soc_cooling_maps: cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; /* Bluetooth HCI H4 */ diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index c03e207ea6c5..e5366d4239b1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -28,6 +28,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -36,6 +37,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -398,6 +400,17 @@ power-domains = <&pwrc PWRC_USB_ID>; }; + cpu_temp: temperature-sensor@4c00 { + compatible = "amlogic,a1-cpu-thermal"; + reg = <0x0 0x4c00 0x0 0x50>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_TS>; + assigned-clocks = <&clkc_periphs CLKID_TS>; + assigned-clock-rates = <500000>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + hwrng: rng@5118 { compatible = "amlogic,meson-rng"; reg = <0x0 0x5118 0x0 0x4>; @@ -419,7 +432,7 @@ clock-names = "fixpll_in", "hifipll_in"; }; - sd_emmc: sd@10000 { + sd_emmc: mmc@10000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x10000 0x0 0x800>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; @@ -453,7 +466,6 @@ assigned-clocks = <&clkc_periphs CLKID_USB_BUS>; assigned-clock-rates = <64000000>; resets = <&reset RESET_USBCTRL>; - reset-name = "usb_ctrl"; dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 6d12b760b90f..e9b22868983d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -25,10 +25,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>, + <&clkc_audio AUD_CLKID_MST_A_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -36,10 +36,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>, + <&clkc_audio AUD_CLKID_MST_B_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -47,10 +47,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>, + <&clkc_audio AUD_CLKID_MST_C_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index b058ed78faf0..d08c97797010 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -215,6 +215,11 @@ #sound-dai-cells = <0>; status = "disabled"; + assigned-clocks = <&clkc CLKID_HDMI_SEL>, + <&clkc CLKID_HDMI>; + assigned-clock-parents = <&xtal>, <0>; + assigned-clock-rates = <0>, <24000000>; + /* VPU VENC Input */ hdmi_tx_venc_port: port@0 { reg = <0>; @@ -987,7 +992,7 @@ mux { groups = "spdif_out_h"; function = "spdif_out"; - drive-strength-microamp = <500>; + drive-strength-microamp = <3000>; bias-disable; }; }; @@ -996,7 +1001,7 @@ mux { groups = "spdif_out_a11"; function = "spdif_out"; - drive-strength-microamp = <500>; + drive-strength-microamp = <3000>; bias-disable; }; }; @@ -1005,7 +1010,7 @@ mux { groups = "spdif_out_a13"; function = "spdif_out"; - drive-strength-microamp = <500>; + drive-strength-microamp = <3000>; bias-disable; }; }; @@ -1741,9 +1746,6 @@ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-g12a-aoclkc"; @@ -1752,278 +1754,278 @@ clocks = <&xtal>, <&clkc CLKID_CLK81>; clock-names = "xtal", "mpeg-clk"; }; + }; - ao_pinctrl: pinctrl { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - i2c_ao_sck_pins: i2c_ao_sck_pins { - mux { - groups = "i2c_ao_sck"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - i2c_ao_sda_pins: i2c_ao_sda { - mux { - groups = "i2c_ao_sda"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - i2c_ao_sck_e_pins: i2c_ao_sck_e { - mux { - groups = "i2c_ao_sck_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - i2c_ao_sda_e_pins: i2c_ao_sda_e { - mux { - groups = "i2c_ao_sda_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - mclk0_ao_pins: mclk0-ao { - mux { - groups = "mclk0_ao"; - function = "mclk0_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; }; + }; - tdm_ao_b_din0_pins: tdm-ao-b-din0 { - mux { - groups = "tdm_ao_b_din0"; - function = "tdm_ao_b"; - bias-disable; - }; + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <3000>; + bias-disable; }; + }; - spdif_ao_out_pins: spdif-ao-out { - mux { - groups = "spdif_ao_out"; - function = "spdif_ao_out"; - drive-strength-microamp = <500>; - bias-disable; - }; + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; }; + }; - tdm_ao_b_din1_pins: tdm-ao-b-din1 { - mux { - groups = "tdm_ao_b_din1"; - function = "tdm_ao_b"; - bias-disable; - }; + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; }; + }; - tdm_ao_b_din2_pins: tdm-ao-b-din2 { - mux { - groups = "tdm_ao_b_din2"; - function = "tdm_ao_b"; - bias-disable; - }; + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { - mux { - groups = "tdm_ao_b_dout0"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { - mux { - groups = "tdm_ao_b_dout1"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { - mux { - groups = "tdm_ao_b_dout2"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - tdm_ao_b_fs_pins: tdm-ao-b-fs { - mux { - groups = "tdm_ao_b_fs"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - tdm_ao_b_sclk_pins: tdm-ao-b-sclk { - mux { - groups = "tdm_ao_b_sclk"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; }; + }; - tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { - mux { - groups = "tdm_ao_b_slv_fs"; - function = "tdm_ao_b"; - bias-disable; - }; + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; }; + }; - tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { - mux { - groups = "tdm_ao_b_slv_sclk"; - function = "tdm_ao_b"; - bias-disable; - }; + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; }; + }; - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; }; + }; - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; }; + }; - uart_ao_b_2_3_pins: uart-ao-b-2-3 { - mux { - groups = "uart_ao_b_tx_2", - "uart_ao_b_rx_3"; - function = "uart_ao_b"; - bias-disable; - }; + uart_ao_b_2_3_pins: uart-ao-b-2-3 { + mux { + groups = "uart_ao_b_tx_2", + "uart_ao_b_rx_3"; + function = "uart_ao_b"; + bias-disable; }; + }; - uart_ao_b_8_9_pins: uart-ao-b-8-9 { - mux { - groups = "uart_ao_b_tx_8", - "uart_ao_b_rx_9"; - function = "uart_ao_b"; - bias-disable; - }; + uart_ao_b_8_9_pins: uart-ao-b-8-9 { + mux { + groups = "uart_ao_b_tx_8", + "uart_ao_b_rx_9"; + function = "uart_ao_b"; + bias-disable; }; + }; - uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { - mux { - groups = "uart_ao_b_cts", - "uart_ao_b_rts"; - function = "uart_ao_b"; - bias-disable; - }; + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { + mux { + groups = "uart_ao_b_cts", + "uart_ao_b_rts"; + function = "uart_ao_b"; + bias-disable; }; + }; - pwm_a_e_pins: pwm-a-e { - mux { - groups = "pwm_a_e"; - function = "pwm_a_e"; - bias-disable; - }; + pwm_a_e_pins: pwm-a-e { + mux { + groups = "pwm_a_e"; + function = "pwm_a_e"; + bias-disable; }; + }; - pwm_ao_a_pins: pwm-ao-a { - mux { - groups = "pwm_ao_a"; - function = "pwm_ao_a"; - bias-disable; - }; + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; }; + }; - pwm_ao_b_pins: pwm-ao-b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; }; + }; - pwm_ao_c_4_pins: pwm-ao-c-4 { - mux { - groups = "pwm_ao_c_4"; - function = "pwm_ao_c"; - bias-disable; - }; + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; }; + }; - pwm_ao_c_6_pins: pwm-ao-c-6 { - mux { - groups = "pwm_ao_c_6"; - function = "pwm_ao_c"; - bias-disable; - }; + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; }; + }; - pwm_ao_d_5_pins: pwm-ao-d-5 { - mux { - groups = "pwm_ao_d_5"; - function = "pwm_ao_d"; - bias-disable; - }; + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; }; + }; - pwm_ao_d_10_pins: pwm-ao-d-10 { - mux { - groups = "pwm_ao_d_10"; - function = "pwm_ao_d"; - bias-disable; - }; + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; }; + }; - pwm_ao_d_e_pins: pwm-ao-d-e { - mux { - groups = "pwm_ao_d_e"; - function = "pwm_ao_d"; - }; + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; }; + }; - remote_input_ao_pins: remote-input-ao { - mux { - groups = "remote_ao_input"; - function = "remote_ao_input"; - bias-disable; - }; + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi index e732df3f3114..664912d1beaa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -363,6 +363,10 @@ power-domains = <&pwrc PWRC_G12A_ETH_ID>; }; +&hdmi_tx { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + &vpu { power-domains = <&pwrc PWRC_G12A_VPU_ID>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 3da7922d83f1..0e239939ade6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -24,7 +24,6 @@ compatible = "simple-audio-amplifier"; enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; VCC-supply = <&vcc_5v>; - #sound-dai-cells = <0>; sound-name-prefix = "10U2"; }; @@ -374,6 +373,7 @@ }; &acodec { + AVDD-supply = <&vddao_1v8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 4b8db872bbf3..6a346cb86a53 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -44,13 +44,6 @@ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -374,13 +367,6 @@ clock-names = "clkin0"; }; -&pwm_cd { - status = "okay"; - pinctrl-0 = <&pwm_d_x6_pins>; - pinctrl-names = "default"; - pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; -}; - &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts new file mode 100644 index 000000000000..ecfa1c683dde --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-dreambox.dtsi" + +/ { + compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b"; + model = "Dreambox One"; +}; + +&sd_emmc_a { + sd-uhs-sdr12; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts new file mode 100644 index 000000000000..df0d71983c3d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-dreambox.dtsi" + +/ { + compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b"; + model = "Dreambox Two"; +}; + +&sd_emmc_a { + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi new file mode 100644 index 000000000000..3a24c2411552 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + cvbs-connector { + status = "disabled"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "DREAMBOX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout_a>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + linux,rc-map-name = "rc-dreambox"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +&spdifout_a { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 890f5bfebb03..8445701100d0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -33,6 +33,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 64 128 192 255>; + pwms = <&pwm_AO_ab 0 40000 0>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; poll-interval = <100>; @@ -286,6 +293,23 @@ clock-latency = <50000>; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_active>; + cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &frddr_a { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c431986e6a33..c37cc6b036cd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -408,6 +408,6 @@ compatible = "usb5e3,610"; reg = <1>; vdd-supply = <&p5v0>; - reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 12ef6e81c8bd..ed00e67e6923 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -311,10 +311,16 @@ <&reset RESET_HDMI_SYSTEM_RESET>, <&reset RESET_HDMI_TX>; reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HDMI_PCLK>, <&clkc CLKID_GCLK_VENCI_INT0>; clock-names = "isfr", "iahb", "venci"; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; + + assigned-clocks = <&clkc CLKID_HDMI_SEL>, + <&clkc CLKID_HDMI>; + assigned-clock-parents = <&xtal>, <0>; + assigned-clock-rates = <0>, <24000000>; }; &sysctrl { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts new file mode 100644 index 000000000000..de996e930b82 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x-p212.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + +/ { + compatible = "osmc,vero4k", "amlogic,s905x", "amlogic,meson-gxl"; + model = "OSMC Vero 4K"; + + reserved-memory { + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-standby { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_LOW>; + default-state = "off"; + panic-indicator; + }; + }; + + dio2133: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&hdmi_5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + sound-name-prefix = "DIT"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "VERO4K"; + audio-aux-devs = <&dio2133>; + audio-widgets = "Line", "Lineout"; + audio-routing = "AU2 INL", "ACODEC LOLP", + "AU2 INR", "ACODEC LORP", + "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "Lineout", "AU2 OUTL", + "Lineout", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-5 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 17bcfa4702e1..f58d1790de1c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -323,10 +323,16 @@ <&reset RESET_HDMI_SYSTEM_RESET>, <&reset RESET_HDMI_TX>; reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HDMI_PCLK>, <&clkc CLKID_GCLK_VENCI_INT0>; clock-names = "isfr", "iahb", "venci"; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; + + assigned-clocks = <&clkc CLKID_HDMI_SEL>, + <&clkc CLKID_HDMI>; + assigned-clock-parents = <&xtal>, <0>; + assigned-clock-rates = <0>, <24000000>; }; &sysctrl { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts new file mode 100644 index 000000000000..1221f4545130 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx"; + model = "Amlogic Meson GXLX (S905L) P271 Development Board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + sound { + model = "P271"; + }; +}; + +&apb { + mali: gpu@c0000 { + /* Mali 450-MP2 */ + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + }; +}; + +&saradc { + compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc"; +}; + +&usb { + dr_mode = "host"; +}; + +&vdec { + compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index 10896f9df682..b686eacb9662 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -312,6 +312,160 @@ }; }; + pwm_a_pins1: pwm-a-pins1 { + mux { + groups = "pwm_a_d"; + function = "pwm_a"; + }; + }; + + pwm_a_pins2: pwm-a-pins2 { + mux { + groups = "pwm_a_x"; + function = "pwm_a"; + }; + }; + + pwm_b_pins1: pwm-b-pins1 { + mux { + groups = "pwm_b_d"; + function = "pwm_b"; + }; + }; + + pwm_b_pins2: pwm-b-pins2 { + mux { + groups = "pwm_b_x"; + function = "pwm_b"; + }; + }; + + pwm_c_pins1: pwm-c-pins1 { + mux { + groups = "pwm_c_d"; + function = "pwm_c"; + }; + }; + + pwm_c_pins2: pwm-c-pins2 { + mux { + groups = "pwm_c_x"; + function = "pwm_c"; + }; + }; + + pwm_d_pins1: pwm-d-pins1 { + mux { + groups = "pwm_d_d"; + function = "pwm_d"; + }; + }; + + pwm_d_pins2: pwm-d-pins2 { + mux { + groups = "pwm_d_h"; + function = "pwm_d"; + }; + }; + + pwm_e_pins1: pwm-e-pins1 { + mux { + groups = "pwm_e_x"; + function = "pwm_e"; + }; + }; + + pwm_e_pins2: pwm-e-pins2 { + mux { + groups = "pwm_e_z"; + function = "pwm_e"; + }; + }; + + pwm_f_pins1: pwm-f-pins1 { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + }; + }; + + pwm_f_pins2: pwm-f-pins2 { + mux { + groups = "pwm_f_z"; + function = "pwm_f"; + }; + }; + + pwm_g_pins1: pwm-g-pins1 { + mux { + groups = "pwm_g_d"; + function = "pwm_g"; + }; + }; + + pwm_g_pins2: pwm-g-pins2 { + mux { + groups = "pwm_g_z"; + function = "pwm_g"; + }; + }; + + pwm_h_pins: pwm-h-pins { + mux { + groups = "pwm_h"; + function = "pwm_h"; + }; + }; + + pwm_i_pins1: pwm-i-pins1 { + mux { + groups = "pwm_i_d"; + function = "pwm_i"; + }; + }; + + pwm_i_pins2: pwm-i-pins2 { + mux { + groups = "pwm_i_h"; + function = "pwm_i"; + }; + }; + + pwm_j_pins: pwm-j-pins { + mux { + groups = "pwm_j"; + function = "pwm_j"; + }; + }; + + pwm_a_hiz_pins: pwm-a-hiz-pins { + mux { + groups = "pwm_a_hiz"; + function = "pwm_a_hiz"; + }; + }; + + pwm_b_hiz_pins: pwm-b-hiz-pins { + mux { + groups = "pwm_b_hiz"; + function = "pwm_b_hiz"; + }; + }; + + pwm_c_hiz_pins: pwm-c-hiz-pins { + mux { + groups = "pwm_c_hiz"; + function = "pwm_c_hiz"; + }; + }; + + pwm_g_hiz_pins: pwm-g-hiz-pins { + mux { + groups = "pwm_g_hiz"; + function = "pwm_g_hiz"; + }; + }; + spicc0_pins_x: spicc0-pins_x { mux { groups = "spi_a_mosi_x", @@ -399,6 +553,51 @@ status = "disabled"; }; + pwm_ab: pwm@58000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x0 0x58000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_A>, + <&clkc_periphs CLKID_PWM_B>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@5a000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x0 0x5a000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_C>, + <&clkc_periphs CLKID_PWM_D>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@5c000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x0 0x5c000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_E>, + <&clkc_periphs CLKID_PWM_F>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_gh: pwm@5e000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x0 0x5e000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_G>, + <&clkc_periphs CLKID_PWM_H>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ij: pwm@60000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x0 0x60000 0x0 0x24>; + clocks = <&clkc_periphs CLKID_PWM_I>, + <&clkc_periphs CLKID_PWM_J>; + #pwm-cells = <3>; + status = "disabled"; + }; + i2c0: i2c@66000 { compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x66000 0x0 0x20>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 643f94d9d08e..97e4b52066dc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -17,10 +17,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>, + <&clkc_audio AUD_CLKID_MST_A_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -28,10 +28,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>, + <&clkc_audio AUD_CLKID_MST_B_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -39,10 +39,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>, + <&clkc_audio AUD_CLKID_MST_C_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -275,8 +275,7 @@ }; tdmin_a: audio-controller@300 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,sm1-tdmin"; reg = <0x0 0x300 0x0 0x40>; sound-name-prefix = "TDMIN_A"; resets = <&clkc_audio AUD_RESET_TDMIN_A>; @@ -291,8 +290,7 @@ }; tdmin_b: audio-controller@340 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,sm1-tdmin"; reg = <0x0 0x340 0x0 0x40>; sound-name-prefix = "TDMIN_B"; resets = <&clkc_audio AUD_RESET_TDMIN_B>; @@ -307,8 +305,7 @@ }; tdmin_c: audio-controller@380 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,sm1-tdmin"; reg = <0x0 0x380 0x0 0x40>; sound-name-prefix = "TDMIN_C"; resets = <&clkc_audio AUD_RESET_TDMIN_C>; @@ -323,8 +320,7 @@ }; tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,sm1-tdmin"; reg = <0x0 0x3c0 0x0 0x40>; sound-name-prefix = "TDMIN_LB"; resets = <&clkc_audio AUD_RESET_TDMIN_LB>; @@ -339,7 +335,7 @@ }; spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", + compatible = "amlogic,sm1-spdifin", "amlogic,axg-spdifin"; reg = <0x0 0x400 0x0 0x30>; #sound-dai-cells = <0>; @@ -353,7 +349,7 @@ }; spdifout_a: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", + compatible = "amlogic,sm1-spdifout", "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; #sound-dai-cells = <0>; @@ -518,6 +514,10 @@ "amlogic,meson-gpio-intc"; }; +&hdmi_tx { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + &pcie { power-domains = <&pwrc PWRC_SM1_PCIE_ID>; }; diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts index 6e05cf1a3df6..b1160780a2a6 100644 --- a/arch/arm64/boot/dts/apm/apm-merlin.dts +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -32,7 +32,7 @@ }; poweroff_mbox: poweroff_mbox@10548000 { - compatible = "syscon"; + compatible = "apm,merlin-poweroff-mailbox", "syscon"; reg = <0x0 0x10548000 0x0 0x30>; }; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index e7644cddf06f..2ef658796746 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -32,7 +32,7 @@ }; poweroff_mbox: poweroff_mbox@10548000 { - compatible = "syscon"; + compatible = "apm,mustang-poweroff-mailbox", "syscon"; reg = <0x0 0x10548000 0x0 0x30>; }; diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts index 901a7fc83307..abd013562995 100644 --- a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts +++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts @@ -21,7 +21,7 @@ reg-io-width = <2>; }; - vmmc_v3_3d: fixed_v3_3d { + vmmc_v3_3d: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc_supply"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi index 6ad7829f9e28..bb9b96fb5314 100644 --- a/arch/arm64/boot/dts/arm/corstone1000.dtsi +++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi @@ -60,14 +60,14 @@ cache-sets = <1024>; }; - refclk100mhz: refclk100mhz { + refclk100mhz: clock-100000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; clock-output-names = "apb_pclk"; }; - smbclk: refclk24mhzx2 { + smbclk: clock-48000000 { /* Reference 24MHz clock x 2 */ compatible = "fixed-clock"; #clock-cells = <0>; @@ -83,7 +83,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; - uartclk: uartclk { + uartclk: clock-50000000 { /* UART clock - 50MHz */ compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 7b41537731a6..93f1e7c026b8 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -99,21 +99,21 @@ timeout-sec = <30>; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 98ed2b329ed6..055764d0b9e5 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -663,7 +663,6 @@ dma-coherent; /* The SMMU is only really of interest to bare-metal hypervisors */ /* iommus = <&smmu_gpu 0>; */ - status = "disabled"; }; sram: sram@2e000000 { diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index 2870b5eeb198..6d7d88e9591a 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -8,35 +8,35 @@ */ / { /* SoC fixed clocks */ - soc_uartclk: refclk7372800hz { + soc_uartclk: clock-7372800 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <7372800>; clock-output-names = "juno:uartclk"; }; - soc_usb48mhz: clk48mhz { + soc_usb48mhz: clock-48000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; clock-output-names = "clk48mhz"; }; - soc_smc50mhz: clk50mhz { + soc_smc50mhz: clock-50000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "smc_clk"; }; - soc_refclk100mhz: refclk100mhz { + soc_refclk100mhz: clock-100000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk400mhz { + soc_faxiclk: clock-400000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <400000000>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index be42932f7e21..ffa4ba4f1fbc 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -8,35 +8,35 @@ */ / { - mb_clk24mhz: clk24mhz { + mb_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "juno_mb:clk24mhz"; }; - mb_clk25mhz: clk25mhz { + mb_clk25mhz: clock-25000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; clock-output-names = "juno_mb:clk25mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "juno_mb:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "juno_mb:refclk32khz"; }; - mb_fixed_3v3: mcc-sb-3v3 { + mb_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "MCC_SB_3V3"; regulator-min-microvolt = <3300000>; @@ -158,7 +158,8 @@ }; apbregs@10000 { - compatible = "syscon", "simple-mfd"; + compatible = "arm,juno-fpga-apb-regs", + "syscon", "simple-mfd"; reg = <0x010000 0x1000>; ranges = <0x0 0x10000 0x1000>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index ba8beef3fe99..66b1b74d27dc 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -8,28 +8,28 @@ * VEMotherBoard.lisa */ / { - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "v2m:refclk32khz"; }; - v2m_fixed_3v3: v2m-3v3 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -41,7 +41,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - v2m_oscclk1: oscclk1 { + v2m_oscclk1: clock-controller { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 9115c99d0dc0..a0e1fa83eafa 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -111,7 +111,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - smbclk: smclk { + smbclk: clock-controller { /* SMC clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -120,7 +120,7 @@ clock-output-names = "smclk"; }; - volt-vio { + regulator-vio { /* VIO to expansion board above */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -130,7 +130,7 @@ regulator-always-on; }; - volt-12v { + regulator-12v { /* 12V from power connector J6 */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 0706c8534ceb..f1c8b4613cbc 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -416,6 +416,14 @@ interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>; }; + trng: rng@12081400 { + compatible = "samsung,exynos850-trng"; + reg = <0x12081400 0x100>; + clocks = <&cmu_core CLK_GOUT_SSS_ACLK>, + <&cmu_core CLK_GOUT_SSS_PCLK>; + clock-names = "secss", "pclk"; + }; + pinctrl_hsi: pinctrl@13430000 { compatible = "samsung,exynos850-pinctrl"; reg = <0x13430000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts index 5e8ffe065081..387fb779bd29 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -131,9 +131,9 @@ }; &usbdrd31 { - status = "okay"; vdd10-supply = <®_placeholder>; vdd33-supply = <®_placeholder>; + status = "okay"; }; &usbdrd31_dwc3 { @@ -145,6 +145,13 @@ }; &usbdrd31_phy { + /* TODO: Update these once PMIC is implemented */ + pll-supply = <®_placeholder>; + dvdd-usb20-supply = <®_placeholder>; + vddh-usb20-supply = <®_placeholder>; + vdd33-usb20-supply = <®_placeholder>; + vdda-usbdp-supply = <®_placeholder>; + vddh-usbdp-supply = <®_placeholder>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index a66e996666b8..eadb8822e6d4 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -213,9 +213,9 @@ pmu-3 { compatible = "arm,dsu-pmu"; - interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>; cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>; }; psci { @@ -288,6 +288,8 @@ compatible = "google,gs101-mct", "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; + clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>; + clock-names = "fin_pll", "mct"; interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>, @@ -300,17 +302,15 @@ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>; - clock-names = "fin_pll", "mct"; }; watchdog_cl0: watchdog@10060000 { compatible = "google,gs101-wdt"; reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>, <&ext_24_5m>; clock-names = "watchdog", "watchdog_src"; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <0>; status = "disabled"; @@ -319,10 +319,10 @@ watchdog_cl1: watchdog@10070000 { compatible = "google,gs101-wdt"; reg = <0x10070000 0x100>; - interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>, <&ext_24_5m>; clock-names = "watchdog", "watchdog_src"; + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <1>; status = "disabled"; @@ -776,12 +776,12 @@ compatible = "google,gs101-hsi2c", "samsung,exynosautov9-hsi2c"; reg = <0x10970000 0xc0>; - interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>; clock-names = "hsi2c", "hsi2c_pclk"; + interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c8_bus>; pinctrl-names = "default"; status = "disabled"; @@ -831,10 +831,10 @@ serial_0: serial@10a00000 { compatible = "google,gs101-uart"; reg = <0x10a00000 0xc0>; - interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&uart0_bus>; pinctrl-names = "default"; samsung,uart-fifosize = <256>; @@ -1157,12 +1157,12 @@ compatible = "google,gs101-hsi2c", "samsung,exynosautov9-hsi2c"; reg = <0x10d50000 0xc0>; - interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>, <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>; clock-names = "hsi2c", "hsi2c_pclk"; + interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c12_bus>; pinctrl-names = "default"; status = "disabled"; @@ -1277,13 +1277,14 @@ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>, <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>; clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk"; - samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; status = "disabled"; }; usbdrd31: usb@11110000 { compatible = "google,gs101-dwusb3"; + ranges = <0x0 0x11110000 0x10000>; clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>, <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>, <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>, @@ -1291,14 +1292,13 @@ clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x11110000 0x10000>; status = "disabled"; usbdrd31_dwc3: usb@0 { compatible = "snps,dwc3"; + reg = <0x0 0x10000>; clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>; clock-names = "ref"; - reg = <0x0 0x10000>; interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index bd443c2bc5a4..f04c22b7de72 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb @@ -177,6 +178,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb @@ -191,6 +193,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb +imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb + imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb @@ -231,11 +236,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo @@ -263,6 +270,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb +imx8mm-phygate-tauri-l-rs232-rs232-dtbs := imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs232.dtbo +imx8mm-phygate-tauri-l-rs232-cts-rts-dtbs := imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rts-cts.dtbo +imx8mm-phygate-tauri-l-rs232-rs485-dtbs := imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs485.dtbo + +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs232.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-cts-rts.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs485.dtb + dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index a0f7bbd691a0..e61ea7e0737e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -74,15 +74,15 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ - <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ - <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ - <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; gic: interrupt-controller@1400000 { @@ -93,7 +93,7 @@ <0x0 0x1402000 0 0x2000>, /* GICC */ <0x0 0x1404000 0 0x2000>, /* GICH */ <0x0 0x1406000 0 0x2000>; /* GICV */ - interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; reboot { @@ -156,10 +156,10 @@ status = "disabled"; }; - esdhc0: esdhc@1560000 { + esdhc0: mmc@1560000 { compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; - interrupts = <0 62 0x4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; @@ -175,10 +175,10 @@ big-endian; }; - esdhc1: esdhc@1580000 { + esdhc1: mmc@1580000 { compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1580000 0x0 0x10000>; - interrupts = <0 65 0x4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; @@ -305,7 +305,7 @@ tmu: tmu@1f00000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; fsl,tmu-calibration = <0x00000000 0x00000025>, @@ -355,7 +355,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; scl-gpios = <&gpio0 2 0>; @@ -367,7 +367,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; - interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; scl-gpios = <&gpio0 13 0>; @@ -379,7 +379,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; @@ -391,7 +391,7 @@ duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; @@ -400,16 +400,16 @@ duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -417,9 +417,9 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -430,7 +430,7 @@ compatible = "fsl,ls1012a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; big-endian; }; @@ -439,7 +439,7 @@ #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -449,9 +449,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 47>, - <&edma0 1 46>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 46>, + <&edma0 1 47>; status = "disabled"; }; @@ -459,7 +459,7 @@ #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -469,9 +469,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 45>, - <&edma0 1 44>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 44>, + <&edma0 1 45>; status = "disabled"; }; @@ -481,8 +481,8 @@ reg = <0x0 0x2c00000 0x0 0x10000>, <0x0 0x2c10000 0x0 0x10000>, <0x0 0x2c20000 0x0 0x10000>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>, - <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "edma-tx", "edma-err"; dma-channels = <32>; big-endian; @@ -496,12 +496,11 @@ usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 0x4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - snps,host-vbus-glitches; }; sata: sata@3200000 { @@ -509,7 +508,7 @@ reg = <0x0 0x3200000 0x0 0x10000>, <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; dma-coherent; @@ -519,7 +518,7 @@ usb1: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; - interrupts = <0 139 0x4>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; phy_type = "ulpi"; }; @@ -528,7 +527,7 @@ compatible = "fsl,ls1012a-msi"; reg = <0x0 0x1572000 0x0 0x8>; msi-controller; - interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; }; pcie1: pcie@3400000 { @@ -536,9 +535,9 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -563,7 +562,7 @@ #fsl,rcpm-wakeup-cells = <1>; }; - ftm_alarm0: timer@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1012a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index ecd2c1ea177f..757a34ba7da3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -201,6 +201,37 @@ #address-cells = <1>; #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + /* Atmel AT24C512C-XHDÂB: 64 KB EEPROM */ + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + }; + + /* AT24C04C 512-byte DDR4 SPD EEPROM */ + /* Documentation says 0x51, but must be even and i2cdetect says 0x52 */ + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <1>; + }; + + /* Atmel AT24C02C-XHMÂB: 256-byte EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + i2c@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 70b8731029c4..6b6e3ee950e5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -155,7 +155,7 @@ }; thermal-zones { - ddr-controller { + ddr-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -175,7 +175,7 @@ }; }; - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -674,7 +674,7 @@ }; pcie_ep1: pcie-ep@3400000 { - compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1028a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000 0x80 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -713,7 +713,7 @@ }; pcie_ep2: pcie-ep@3500000 { - compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1028a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000 0x88 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -828,6 +828,7 @@ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1", "qdma-queue2", "qdma-queue3"; + #dma-cells = <1>; dma-channels = <8>; block-number = <1>; block-offset = <0x10000>; @@ -859,8 +860,8 @@ malidp0: display@f080000 { compatible = "arm,mali-dp500"; reg = <0x0 0xf080000 0x0 0x10000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; clocks = <&dpclk>, <&clockgen QORIQ_CLK_HWACCEL 2>, @@ -902,9 +903,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 4>, - <&edma0 1 3>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 3>, + <&edma0 1 4>; fsl,sai-asynchronous; status = "disabled"; }; @@ -923,9 +924,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 6>, - <&edma0 1 5>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 5>, + <&edma0 1 6>; fsl,sai-asynchronous; status = "disabled"; }; @@ -944,9 +945,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 8>, - <&edma0 1 7>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 7>, + <&edma0 1 8>; fsl,sai-asynchronous; status = "disabled"; }; @@ -965,9 +966,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 10>, - <&edma0 1 9>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 9>, + <&edma0 1 10>; fsl,sai-asynchronous; status = "disabled"; }; @@ -986,9 +987,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 12>, - <&edma0 1 11>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 11>, + <&edma0 1 12>; fsl,sai-asynchronous; status = "disabled"; }; @@ -1007,9 +1008,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 14>, - <&edma0 1 13>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 13>, + <&edma0 1 14>; fsl,sai-asynchronous; status = "disabled"; }; @@ -1024,7 +1025,7 @@ tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; fsl,tmu-calibration = <0x00000000 0x00000024>, @@ -1325,7 +1326,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,ls1028a-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; @@ -1333,7 +1334,7 @@ status = "disabled"; }; - ftm_alarm1: timer@2810000 { + ftm_alarm1: rtc@2810000 { compatible = "fsl,ls1028a-ftm-alarm"; reg = <0x0 0x2810000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index dda27ed7aaf2..11b1356e95d5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -64,7 +64,7 @@ 0x2 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; big-endian; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 26f8540cb101..c4532c809f0a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -71,7 +71,7 @@ 0x1 0x0 0x0 0x7e800000 0x00010000 0x2 0x0 0x0 0x7fb00000 0x00000100>; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; #address-cells = <1>; #size-cells = <1>; @@ -104,6 +104,12 @@ compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */ reg = <0>; spi-max-frequency = <1000000>; /* input clock */ + /* + * Standard CS timing properties replace the deprecated vendor + * variants below. + */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <100>; fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <100>; }; @@ -112,6 +118,12 @@ compatible = "maxim,ds26522"; reg = <2>; spi-max-frequency = <2000000>; + /* + * Standard CS timing properties replace the deprecated vendor + * variants below. + */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <50>; fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <50>; }; @@ -120,6 +132,12 @@ compatible = "maxim,ds26522"; reg = <3>; spi-max-frequency = <2000000>; + /* + * Standard CS timing properties replace the deprecated vendor + * variants below. + */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <50>; fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <50>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 8ee6d8c0ef61..17f4e3171120 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -154,7 +154,7 @@ }; thermal-zones { - ddr-controller { + ddr-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -174,7 +174,7 @@ }; }; - serdes { + serdes-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -194,7 +194,7 @@ }; }; - fman { + fman-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 2>; @@ -214,7 +214,7 @@ }; }; - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; @@ -245,7 +245,7 @@ }; }; - sec { + sec-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -268,19 +268,19 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, /* Physical Secure PPI */ - <1 14 0xf08>, /* Physical Non-Secure PPI */ - <1 11 0xf08>, /* Virtual PPI */ - <1 10 0xf08>; /* Hypervisor PPI */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; fsl,erratum-a008585; }; pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <0 106 0x4>, - <0 107 0x4>, - <0 95 0x4>, - <0 97 0x4>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -295,7 +295,7 @@ <0x0 0x1402000 0 0x2000>, /* GICC */ <0x0 0x1404000 0 0x2000>, /* GICH */ <0x0 0x1406000 0 0x2000>; /* GICV */ - interrupts = <1 9 0xf08>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; soc: soc { @@ -352,7 +352,7 @@ #size-cells = <1>; ranges = <0x0 0x00 0x1700000 0x100000>; reg = <0x00 0x1700000 0x0 0x100000>; - interrupts = <0 75 0x4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; sec_jr0: jr@10000 { @@ -360,7 +360,7 @@ "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x10000 0x10000>; - interrupts = <0 71 0x4>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { @@ -368,7 +368,7 @@ "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x20000 0x10000>; - interrupts = <0 72 0x4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { @@ -376,7 +376,7 @@ "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x30000 0x10000>; - interrupts = <0 73 0x4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { @@ -384,7 +384,7 @@ "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x40000 0x10000>; - interrupts = <0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -405,7 +405,7 @@ ifc: memory-controller@1530000 { compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; - interrupts = <0 43 0x4>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; }; qspi: spi@1550000 { @@ -415,7 +415,7 @@ reg = <0x0 0x1550000 0x0 0x10000>, <0x0 0x40000000 0x0 0x4000000>; reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 99 0x4>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>, @@ -424,10 +424,10 @@ status = "disabled"; }; - esdhc: esdhc@1560000 { + esdhc: mmc@1560000 { compatible = "fsl,ls1043a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; - interrupts = <0 62 0x4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; @@ -438,14 +438,14 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <0 144 0x4>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; big-endian; }; tmu: tmu@1f00000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = <0x00000000 0x00000023>, @@ -505,11 +505,11 @@ memory-region = <&bman_fbpr>; }; - bportals: bman-portals@508000000 { + bportals: bman-portals-bus@508000000 { ranges = <0x0 0x5 0x08000000 0x8000000>; }; - qportals: qman-portals@500000000 { + qportals: qman-portals-bus@500000000 { ranges = <0x0 0x5 0x00000000 0x8000000>; }; @@ -518,7 +518,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 64 0x4>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; @@ -532,8 +532,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; - interrupts = <0 56 0x4>; - clock-names = "i2c"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; dmas = <&edma0 1 38>, @@ -547,8 +547,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; - interrupts = <0 57 0x4>; - clock-names = "i2c"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -560,8 +560,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; - interrupts = <0 58 0x4>; - clock-names = "i2c"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -573,8 +573,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; - interrupts = <0 59 0x4>; - clock-names = "i2c"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -584,7 +584,7 @@ duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; - interrupts = <0 54 0x4>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; }; @@ -592,7 +592,7 @@ duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; - interrupts = <0 54 0x4>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; }; @@ -600,7 +600,7 @@ duart2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; - interrupts = <0 55 0x4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; }; @@ -608,7 +608,7 @@ duart3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; - interrupts = <0 55 0x4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; }; @@ -616,7 +616,7 @@ gpio1: gpio@2300000 { compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 66 0x4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -626,7 +626,7 @@ gpio2: gpio@2310000 { compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 67 0x4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -636,7 +636,7 @@ gpio3: gpio@2320000 { compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 68 0x4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -646,7 +646,7 @@ gpio4: gpio@2330000 { compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 134 0x4>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -721,7 +721,7 @@ lpuart0: serial@2950000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; - interrupts = <0 48 0x4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; status = "disabled"; @@ -730,7 +730,7 @@ lpuart1: serial@2960000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; - interrupts = <0 49 0x4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; @@ -740,7 +740,7 @@ lpuart2: serial@2970000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; - interrupts = <0 50 0x4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; @@ -750,7 +750,7 @@ lpuart3: serial@2980000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; - interrupts = <0 51 0x4>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; @@ -760,7 +760,7 @@ lpuart4: serial@2990000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; - interrupts = <0 52 0x4>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; @@ -770,7 +770,7 @@ lpuart5: serial@29a0000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; - interrupts = <0 53 0x4>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; @@ -780,10 +780,9 @@ wdog0: watchdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; - interrupts = <0 83 0x4>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; - clock-names = "wdog"; big-endian; }; @@ -793,8 +792,8 @@ reg = <0x0 0x2c00000 0x0 0x10000>, <0x0 0x2c10000 0x0 0x10000>, <0x0 0x2c20000 0x0 0x10000>; - interrupts = <0 103 0x4>, - <0 103 0x4>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "edma-tx", "edma-err"; dma-channels = <32>; big-endian; @@ -805,7 +804,7 @@ QORIQ_CLK_PLL_DIV(1)>; }; - aux_bus: aux_bus { + aux_bus: aux-bus { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; @@ -815,7 +814,7 @@ usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -827,7 +826,7 @@ usb1: usb@3000000 { compatible = "snps,dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -839,7 +838,7 @@ usb2: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -853,7 +852,7 @@ reg = <0x0 0x3200000 0x0 0x10000>, <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; dma-coherent; @@ -864,21 +863,21 @@ compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1571000 0x0 0x8>; msi-controller; - interrupts = <0 116 0x4>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; }; msi2: msi-controller2@1572000 { compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1572000 0x0 0x8>; msi-controller; - interrupts = <0 126 0x4>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; }; msi3: msi-controller3@1573000 { compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1573000 0x0 0x8>; msi-controller; - interrupts = <0 160 0x4>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; }; pcie1: pcie@3400000 { @@ -886,8 +885,8 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; @@ -913,8 +912,8 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>, - <0 128 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; @@ -940,8 +939,8 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; @@ -974,6 +973,7 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1", "qdma-queue2", "qdma-queue3"; + #dma-cells = <1>; dma-channels = <8>; block-number = <1>; block-offset = <0x10000>; @@ -989,7 +989,7 @@ #fsl,rcpm-wakeup-cells = <1>; }; - ftm_alarm0: timer@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1043a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 3b0ed9305f2b..e5296e51f656 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -151,7 +151,7 @@ 0x2 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; big-endian; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 754a64be739c..200e52622f99 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -122,7 +122,7 @@ }; thermal-zones { - ddr-controller { + ddr-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -142,7 +142,7 @@ }; }; - serdes { + serdes-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -162,7 +162,7 @@ }; }; - fman { + fman-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 2>; @@ -182,7 +182,7 @@ }; }; - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; @@ -213,7 +213,7 @@ }; }; - sec { + sec-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -308,7 +308,7 @@ status = "disabled"; }; - esdhc: esdhc@1560000 { + esdhc: mmc@1560000 { compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -409,11 +409,11 @@ }; - qportals: qman-portals@500000000 { + qportals: qman-portals-bus@500000000 { ranges = <0x0 0x5 0x00000000 0x8000000>; }; - bportals: bman-portals@508000000 { + bportals: bman-portals-bus@508000000 { ranges = <0x0 0x5 0x08000000 0x8000000>; }; @@ -441,7 +441,7 @@ tmu: tmu@1f00000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ @@ -589,7 +589,7 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -599,7 +599,7 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -609,7 +609,7 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -619,7 +619,7 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -715,7 +715,7 @@ QORIQ_CLK_PLL_DIV(2)>; }; - aux_bus: aux_bus { + aux_bus: aux-bus { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; @@ -801,9 +801,9 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -840,9 +840,9 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -879,9 +879,9 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -925,6 +925,7 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1", "qdma-queue2", "qdma-queue3"; + #dma-cells = <1>; dma-channels = <8>; block-number = <1>; block-offset = <0x10000>; @@ -940,7 +941,7 @@ #fsl,rcpm-wakeup-cells = <1>; }; - ftm_alarm0: timer@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1046a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index aa52ff73ff9e..d238a8440a81 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -113,7 +113,7 @@ 3 0 0x5 0x20000000 0x00010000>; status = "okay"; - nor@0,0 { + flash@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 604bf88d70b3..8ce4b6aae79d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -118,7 +118,7 @@ <0x0 0x0c0c0000 0 0x2000>, /* GICC */ <0x0 0x0c0d0000 0 0x1000>, /* GICH */ <0x0 0x0c0e0000 0 0x20000>; /* GICV */ - interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -131,7 +131,7 @@ }; thermal-zones { - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -166,7 +166,7 @@ }; }; - soc { + soc-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -183,10 +183,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ - <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ - <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ - <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; pmu { @@ -280,7 +280,7 @@ tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ @@ -347,7 +347,7 @@ reg = <0x0 0x21c0500 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -356,14 +356,14 @@ reg = <0x0 0x21c0600 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; gpio0: gpio@2300000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -374,7 +374,7 @@ gpio1: gpio@2310000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -385,7 +385,7 @@ gpio2: gpio@2320000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -396,7 +396,7 @@ gpio3: gpio@2330000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -407,7 +407,7 @@ ifc: memory-controller@2240000 { compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; little-endian; #address-cells = <2>; #size-cells = <1>; @@ -419,7 +419,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -430,7 +430,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -441,7 +441,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -452,7 +452,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -474,10 +474,10 @@ status = "disabled"; }; - esdhc: esdhc@2140000 { + esdhc: mmc@2140000 { compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; @@ -490,7 +490,7 @@ usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -501,7 +501,7 @@ usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -514,7 +514,7 @@ reg = <0x0 0x3200000 0x0 0x10000>, <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; - interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; dma-coherent; @@ -565,7 +565,7 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -604,7 +604,7 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -642,7 +642,7 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -880,7 +880,7 @@ }; }; - cluster1_core0_watchdog: wdt@c000000 { + cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -890,7 +890,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core1_watchdog: wdt@c010000 { + cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -900,7 +900,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core2_watchdog: wdt@c020000 { + cluster1_core2_watchdog: watchdog@c020000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -910,7 +910,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core3_watchdog: wdt@c030000 { + cluster1_core3_watchdog: watchdog@c030000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -920,7 +920,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core0_watchdog: wdt@c100000 { + cluster2_core0_watchdog: watchdog@c100000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -930,7 +930,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core1_watchdog: wdt@c110000 { + cluster2_core1_watchdog: watchdog@c110000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -940,7 +940,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core2_watchdog: wdt@c120000 { + cluster2_core2_watchdog: watchdog@c120000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -950,7 +950,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core3_watchdog: wdt@c130000 { + cluster2_core3_watchdog: watchdog@c130000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -1040,7 +1040,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,ls1088a-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 8352197cea6f..e9bc1f4fa13c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -15,7 +15,7 @@ / { pmu { compatible = "arm,cortex-a57-pmu"; - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 245bbd615c81..60c422560e33 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -15,7 +15,7 @@ / { pmu { compatible = "arm,cortex-a72-pmu"; - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index e2c94da6d6e8..9178cd61c786 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -43,7 +43,7 @@ 0x2 0x0 0x5 0x30000000 0x00010000 0x3 0x0 0x5 0x20000000 0x00010000>; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 537cecb13dd0..69cd05a30b85 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -21,7 +21,7 @@ 0x2 0x0 0x5 0x30000000 0x00010000 0x3 0x0 0x5 0x20000000 0x00010000>; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index ccba0a135b24..bde89de2576e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -58,7 +58,7 @@ #size-cells = <2>; ranges; interrupt-controller; - interrupts = <1 9 0x4>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; @@ -80,7 +80,7 @@ }; thermal-zones { - ddr-controller1 { + ddr-ctrl1-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -94,7 +94,7 @@ }; }; - ddr-controller2 { + ddr-ctrl2-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 2>; @@ -108,7 +108,7 @@ }; }; - ddr-controller3 { + ddr-ctrl3-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; @@ -122,7 +122,7 @@ }; }; - core-cluster1 { + core-cluster1-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -151,7 +151,7 @@ }; }; - core-cluster2 { + core-cluster2-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 5>; @@ -180,7 +180,7 @@ }; }; - core-cluster3 { + core-cluster3-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 6>; @@ -209,7 +209,7 @@ }; }; - core-cluster4 { + core-cluster4-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 7>; @@ -241,10 +241,10 @@ timer: timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ - <1 14 4>, /* Physical Non-Secure PPI, active-low */ - <1 11 4>, /* Virtual PPI, active-low */ - <1 10 4>; /* Hypervisor PPI, active-low */ + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hypervisor PPI */ }; psci { @@ -314,7 +314,7 @@ tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; fsl,tmu-calibration = <0x00000000 0x00000026>, @@ -362,7 +362,7 @@ reg = <0x0 0x21c0500 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 0x4>; /* Level high type */ + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; serial1: serial@21c0600 { @@ -370,7 +370,7 @@ reg = <0x0 0x21c0600 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 0x4>; /* Level high type */ + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; serial2: serial@21d0500 { @@ -378,7 +378,7 @@ reg = <0x0 0x21d0500 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 33 0x4>; /* Level high type */ + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; }; serial3: serial@21d0600 { @@ -386,10 +386,10 @@ reg = <0x0 0x21d0600 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 33 0x4>; /* Level high type */ + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; }; - cluster1_core0_watchdog: wdt@c000000 { + cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -399,7 +399,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core1_watchdog: wdt@c010000 { + cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -409,7 +409,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core0_watchdog: wdt@c100000 { + cluster2_core0_watchdog: watchdog@c100000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -419,7 +419,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core1_watchdog: wdt@c110000 { + cluster2_core1_watchdog: watchdog@c110000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -429,7 +429,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster3_core0_watchdog: wdt@c200000 { + cluster3_core0_watchdog: watchdog@c200000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -439,7 +439,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster3_core1_watchdog: wdt@c210000 { + cluster3_core1_watchdog: watchdog@c210000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -449,7 +449,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster4_core0_watchdog: wdt@c300000 { + cluster4_core0_watchdog: watchdog@c300000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -459,7 +459,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster4_core1_watchdog: wdt@c310000 { + cluster4_core1_watchdog: watchdog@c310000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -883,48 +883,48 @@ #iommu-cells = <1>; stream-match-mask = <0x7C00>; dma-coherent; - interrupts = <0 13 4>, /* global secure fault */ - <0 14 4>, /* combined secure interrupt */ - <0 15 4>, /* global non-secure fault */ - <0 16 4>, /* combined non-secure interrupt */ + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* global secure fault */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* combined secure interrupt */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /* global non-secure fault */ + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /* combined non-secure interrupt */ /* performance counter interrupts 0-7 */ - <0 211 4>, <0 212 4>, - <0 213 4>, <0 214 4>, - <0 215 4>, <0 216 4>, - <0 217 4>, <0 218 4>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, /* per context interrupt, 64 interrupts */ - <0 146 4>, <0 147 4>, - <0 148 4>, <0 149 4>, - <0 150 4>, <0 151 4>, - <0 152 4>, <0 153 4>, - <0 154 4>, <0 155 4>, - <0 156 4>, <0 157 4>, - <0 158 4>, <0 159 4>, - <0 160 4>, <0 161 4>, - <0 162 4>, <0 163 4>, - <0 164 4>, <0 165 4>, - <0 166 4>, <0 167 4>, - <0 168 4>, <0 169 4>, - <0 170 4>, <0 171 4>, - <0 172 4>, <0 173 4>, - <0 174 4>, <0 175 4>, - <0 176 4>, <0 177 4>, - <0 178 4>, <0 179 4>, - <0 180 4>, <0 181 4>, - <0 182 4>, <0 183 4>, - <0 184 4>, <0 185 4>, - <0 186 4>, <0 187 4>, - <0 188 4>, <0 189 4>, - <0 190 4>, <0 191 4>, - <0 192 4>, <0 193 4>, - <0 194 4>, <0 195 4>, - <0 196 4>, <0 197 4>, - <0 198 4>, <0 199 4>, - <0 200 4>, <0 201 4>, - <0 202 4>, <0 203 4>, - <0 204 4>, <0 205 4>, - <0 206 4>, <0 207 4>, - <0 208 4>, <0 209 4>; + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; dspi: spi@2100000 { @@ -933,18 +933,18 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 26 0x4>; /* Level high type */ + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; clock-names = "dspi"; spi-num-chipselects = <5>; }; - esdhc: esdhc@2140000 { + esdhc: mmc@2140000 { status = "disabled"; compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; voltage-ranges = <1800 1800 3300 3300>; @@ -956,7 +956,7 @@ gpio0: gpio@2300000 { compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; little-endian; #gpio-cells = <2>; @@ -967,7 +967,7 @@ gpio1: gpio@2310000 { compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; little-endian; #gpio-cells = <2>; @@ -978,7 +978,7 @@ gpio2: gpio@2320000 { compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; little-endian; #gpio-cells = <2>; @@ -989,7 +989,7 @@ gpio3: gpio@2330000 { compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; little-endian; #gpio-cells = <2>; @@ -1003,8 +1003,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; }; @@ -1015,8 +1015,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; }; @@ -1027,8 +1027,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; }; @@ -1039,8 +1039,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; }; @@ -1048,7 +1048,7 @@ ifc: memory-controller@2240000 { compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 0x4>; /* Level high type */ + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; little-endian; #address-cells = <2>; #size-cells = <1>; @@ -1077,7 +1077,7 @@ pcie1: pcie@3400000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; - interrupts = <0 108 0x4>; /* Level high type */ + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; #address-cells = <3>; #size-cells = <2>; @@ -1099,7 +1099,7 @@ pcie2: pcie@3500000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; - interrupts = <0 113 0x4>; /* Level high type */ + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; #address-cells = <3>; #size-cells = <2>; @@ -1121,7 +1121,7 @@ pcie3: pcie@3600000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; - interrupts = <0 118 0x4>; /* Level high type */ + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; #address-cells = <3>; #size-cells = <2>; @@ -1143,7 +1143,7 @@ pcie4: pcie@3700000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; reg-names = "regs", "config"; - interrupts = <0 123 0x4>; /* Level high type */ + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; #address-cells = <3>; #size-cells = <2>; @@ -1166,7 +1166,7 @@ status = "disabled"; compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>; - interrupts = <0 133 0x4>; /* Level high type */ + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; dma-coherent; @@ -1176,7 +1176,7 @@ status = "disabled"; compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3210000 0x0 0x10000>; - interrupts = <0 136 0x4>; /* Level high type */ + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; dma-coherent; @@ -1192,7 +1192,7 @@ usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 0x4>; /* Level high type */ + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -1203,7 +1203,7 @@ usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 0x4>; /* Level high type */ + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -1215,7 +1215,7 @@ ccn@4000000 { compatible = "arm,ccn-504"; reg = <0x0 0x04000000 0x0 0x01000000>; - interrupts = <0 12 4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; }; rcpm: power-controller@1e34040 { @@ -1225,7 +1225,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,ls208xa-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; @@ -1236,14 +1236,14 @@ ddr1: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <0 17 0x4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; little-endian; }; ddr2: memory-controller@1090000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1090000 0x0 0x1000>; - interrupts = <0 18 0x4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; little-endian; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 96055593204a..26c7ca31e22e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -449,7 +449,7 @@ }; thermal-zones { - cluster6-7 { + cluster6-7-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -492,7 +492,7 @@ }; }; - ddr-cluster5 { + ddr-cluster5-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -512,7 +512,7 @@ }; }; - wriop { + wriop-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 2>; @@ -532,7 +532,7 @@ }; }; - dce-qbman-hsio2 { + dce-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; @@ -552,7 +552,7 @@ }; }; - ccn-dpaa-tbu { + ccn-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -572,7 +572,7 @@ }; }; - cluster4-hsio3 { + cluster4-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 5>; @@ -592,7 +592,7 @@ }; }; - cluster2-3 { + cluster2-3-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 6>; @@ -745,7 +745,7 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -761,7 +761,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -777,7 +777,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -793,7 +793,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -809,7 +809,7 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -825,7 +825,7 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -841,7 +841,7 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -857,7 +857,7 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; + clock-names = "ipg"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>; pinctrl-names = "default", "gpio"; @@ -925,10 +925,10 @@ status = "disabled"; }; - esdhc0: esdhc@2140000 { - compatible = "fsl,esdhc"; + esdhc0: mmc@2140000 { + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; dma-coherent; @@ -939,10 +939,10 @@ status = "disabled"; }; - esdhc1: esdhc@2150000 { - compatible = "fsl,esdhc"; + esdhc1: mmc@2150000 { + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; - interrupts = <0 63 0x4>; /* Level high type */ + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; dma-coherent; @@ -1027,7 +1027,7 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -1038,7 +1038,7 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -1049,7 +1049,7 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -1060,7 +1060,7 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -1085,7 +1085,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,lx2160a-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; @@ -1702,8 +1702,8 @@ pinmux_i2crv: pinmux@70010012c { compatible = "pinctrl-single"; reg = <0x00000007 0x0010012c 0x0 0xc>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index 897cbb7b6742..ff5df0fed9e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -447,7 +447,6 @@ audio_subsys: bus@59000000 { <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>; - memory-region = <&dsp_reserved>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi new file mode 100644 index 000000000000..d715f2a6b037 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/clock/imx8-lpcg.h> + +cm41_ipg_clk: clock-cm41-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <132000000>; + clock-output-names = "cm41_ipg_clk"; +}; + +cm41_subsys: bus@38000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x38000000 0x0 0x38000000 0x4000000>; + interrupt-parent = <&cm41_intmux>; + + cm41_i2c: i2c@3b230000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x3b230000 0x1000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cm41_i2c_lpcg IMX_LPCG_CLK_0>, + <&cm41_i2c_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_M4_1_I2C>; + status = "disabled"; + }; + + cm41_intmux: intmux@3b400000 { + compatible = "fsl,imx-intmux"; + reg = <0x3b400000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&cm41_ipg_clk>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_M4_1_INTMUX>; + status = "disabled"; + }; + + cm41_i2c_lpcg: clock-controller@3b630000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x3b630000 0x1000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>, + <&cm41_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "cm41_lpcg_i2c_clk", + "cm41_lpcg_i2c_ipg_clk"; + power-domains = <&pd IMX_SC_R_M4_1_I2C>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 4aaf5a0c1ed8..a4a10ce03bfe 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -28,6 +28,13 @@ conn_ipg_clk: clock-conn-ipg { clock-output-names = "conn_ipg_clk"; }; +conn_bch_clk: clock-conn-bch { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "conn_bch_clk"; +}; + conn_subsys: bus@5b000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -302,4 +309,66 @@ conn_subsys: bus@5b000000 { "usb3_aclk"; power-domains = <&pd IMX_SC_R_USB_2_PHY>; }; + + rawnand_0_lpcg: clock-controller@5b290000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b290000 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>, + <&conn_axi_clk>, + <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "gpmi_bch", + "gpmi_io", + "gpmi_apb", + "gpmi_bch_apb"; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + rawnand_4_lpcg: clock-controller@5b290004 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b290004 0x10000>; + #clock-cells = <1>; + clocks = <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "apbhdma_hclk"; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + dma_apbh: dma-controller@5b810000 { + compatible = "fsl,imx8qxp-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x5b810000 0x2000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&rawnand_4_lpcg IMX_LPCG_CLK_0>; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + gpmi: nand-controller@5b812000{ + compatible = "fsl,imx8qxp-gpmi-nand"; + reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>; + reg-names = "gpmi-nand", "bch"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&rawnand_0_lpcg IMX_LPCG_CLK_1>, + <&rawnand_0_lpcg IMX_LPCG_CLK_4>, + <&rawnand_0_lpcg IMX_LPCG_CLK_0>, + <&rawnand_0_lpcg IMX_LPCG_CLK_5>; + clock-names = "gpmi_io", "gpmi_apb", + "gpmi_bch", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + power-domains = <&pd IMX_SC_R_NAND>; + assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <50000000>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 2412ab145c06..1a74ac3ee4ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -24,6 +24,19 @@ stdout-path = &lpuart0; }; + imx8dxl-cm4 { + compatible = "fsl,imx8qxp-cm4"; + clocks = <&clk_dummy>; + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>; + fsl,resource-id = <IMX_SC_R_M4_0_PID0>; + fsl,entry-address = <0x34fe0000>; + }; + + memory@80000000 { device_type = "memory"; reg = <0x00000000 0x80000000 0 0x40000000>; @@ -51,6 +64,37 @@ alloc-ranges = <0 0x98000000 0 0x14000000>; linux,cma-default; }; + + vdev0vring0: memory0@90000000 { + reg = <0 0x90000000 0 0x8000>; + no-map; + }; + + vdev0vring1: memory@90008000 { + reg = <0 0x90008000 0 0x8000>; + no-map; + }; + + vdev1vring0: memory@90010000 { + reg = <0 0x90010000 0 0x8000>; + no-map; + }; + + vdev1vring1: memory@90018000 { + reg = <0 0x90018000 0 0x8000>; + no-map; + }; + + rsc_table: memory-rsc-table@900ff000 { + reg = <0 0x900ff000 0 0x1000>; + no-map; + }; + + vdevbuffer: memory-vdevbuffer@90400000 { + compatible = "shared-dma-pool"; + reg = <0 0x90400000 0 0x100000>; + no-map; + }; }; m2_uart1_sel: regulator-m2uart1sel { @@ -137,6 +181,76 @@ enable-active-high; regulator-always-on; }; + + bt_sco_codec: audio-codec-bt { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai0>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-wm8960-1 { + compatible = "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8960_1>; + audio-asrc = <&asrc0>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-2 { + compatible = "fsl,imx-audio-wm8960"; + model = "wm8960-audio-2"; + audio-cpu = <&sai2>; + audio-codec = <&wm8960_2>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-3 { + compatible = "fsl,imx-audio-wm8960"; + model = "wm8960-audio-3"; + audio-cpu = <&sai3>; + audio-codec = <&wm8960_3>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; }; &adc0 { @@ -144,6 +258,11 @@ status = "okay"; }; +&asrc0 { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -271,6 +390,78 @@ }; }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + wm8960_1: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + wm8960_2: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + wm8960_3: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + i2c@4 { #address-cells = <1>; #size-cells = <0>; @@ -358,6 +549,10 @@ status = "okay"; }; +&lsio_mu5 { + status = "okay"; +}; + &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; @@ -390,6 +585,53 @@ status = "okay"; }; +&sai0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai0>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai2_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + fsl,sai-asynchronous; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai3_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + fsl,sai-asynchronous; + status = "okay"; +}; + &thermal_zones { pmic-thermal { polling-delay-passive = <250>; @@ -632,6 +874,41 @@ >; }; + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060 + IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040 + IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060 + IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060 + IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040 + IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040 + IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060 + IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi index 5d012c95222f..72434529f78e 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -3,6 +3,63 @@ * Copyright 2019~2020, 2022 NXP */ +/delete-node/ &asrc1; +/delete-node/ &asrc1_lpcg; +/delete-node/ &adc1; +/delete-node/ &adc1_lpcg; +/delete-node/ &amix; +/delete-node/ &amix_lpcg; +/delete-node/ &edma1; +/delete-node/ &esai0; +/delete-node/ &esai0_lpcg; +/delete-node/ &sai4; +/delete-node/ &sai4_lpcg; +/delete-node/ &sai5; +/delete-node/ &sai5_lpcg; + +&acm { + compatible = "fsl,imx8dxl-acm"; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "spdif0_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk"; +}; + &audio_ipg_clk { clock-frequency = <160000000>; }; @@ -177,3 +234,24 @@ &lpspi3 { interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; }; + +&sai0 { + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sai1 { + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sai2 { + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sai3 { + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spdif0 { + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* rx */ + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* tx */ +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index 6d13e4fafb76..1e02b04494e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -108,6 +108,13 @@ }; +&dma_apbh { + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; +}; + &enet0_lpcg { clocks = <&conn_enet0_root_clk>, <&conn_enet0_root_clk>, @@ -127,6 +134,10 @@ assigned-clock-rates = <125000000>; }; +&gpmi { + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; +}; + &usdhc1 { compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 90d1901df2b1..930e14fec423 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -400,7 +400,7 @@ pinctrl-0 = <&pinctrl_typec1>; reg = <0x50>; interrupt-parent = <&gpio2>; - interrupts = <11 8>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; status = "okay"; typec1_con: connector { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file mode 100644 index 000000000000..370558a8ba46 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2020 CompuLab + +#include "imx8mm-ucm-som.dtsi" +#include <dt-bindings/phy/phy-imx8-pcie.h> +/ { + model = "CompuLab i.MX8MM IoT Gateway"; + compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm"; + + regulator-usbhub-ena { + compatible = "regulator-fixed"; + regulator-name = "usbhub_ena"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-usbhub-rst { + compatible = "regulator-fixed"; + regulator-name = "usbhub_rst"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-uart1-mode { + compatible = "regulator-fixed"; + regulator-name = "uart1_mode"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-uart1-duplex { + compatible = "regulator-fixed"; + regulator-name = "uart1_duplex"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-uart1-shdn { + compatible = "regulator-fixed"; + regulator-name = "uart1_shdn"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-uart1-trmen { + compatible = "regulator-fixed"; + regulator-name = "uart1_trmen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 25 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + regulator-usdhc2-v { + compatible = "regulator-fixed"; + regulator-name = "usdhc2_v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-mpcie2-rst { + compatible = "regulator-fixed"; + regulator-name = "mpcie2_rst"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-mpcie2lora-dis { + compatible = "regulator-fixed"; + regulator-name = "mpcie2lora_dis"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + pcie0_refclk: clock-pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usbotg2 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "host"; + usb-role-switch; + status = "okay"; + + usbhub@1 { + compatible = "usb424,9514"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb9514>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + mmc-ddr-1_8v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* mPCIe2 */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x140 + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x140 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x140 + >; + }; + + pinctrl_usb9514: usb9514grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x140 /* USB_PS_EN */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x140 /* HUB_RSTn */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso new file mode 100644 index 000000000000..bf3e04651ba0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Jens Lang <j.lang@phytec.de> + * + * Tauri-L 2 x RS232: + * - GPIO3_20 uart4_rs485_en needs to be driven low (inactive) + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "phytec,imx8mm-phygate-tauri-l"; + +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrcl-0 = <&pinctrl_gpio3_hog>; + + uart4_rs485_en { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "uart4_rs485_en"; + }; +}; + +/* UART2 - RS232 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +/* UART4 - RS232 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MM_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x00 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x00 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x49 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x49 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso new file mode 100644 index 000000000000..f4448cde0407 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Jens Lang <j.lang@phytec.de> + * + * Tauri-L RS232 + RS485: + * - GPIO3_20 uart4_rs485_en needs to be driven high (active) + * - GPIO3_25 RS485_DE Driver enable + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "phytec,imx8mm-phygate-tauri-l"; + +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrcl-0 = <&pinctrl_gpio3_hog>; + + uart4_rs485_en { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "uart4_rs485_en"; + }; +}; + +/* UART2 - RS232 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "okay"; +}; + +/* UART4 - RS485 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MM_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + rts-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x00 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x00 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x49 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x49 + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x49 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso new file mode 100644 index 000000000000..107f743fbb1c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Jens Lang <j.lang@phytec.de> + * + * Tauri-L RS232 with RTS/CTS hardware flow control: + * - UART4_TX becomes RTS + * - UART4_RX becomes CTS + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include "imx8mm-pinfunc.h" + +/dts-v1/; +/plugin/; + + +&{/} { + compatible = "phytec,imx8mm-phygate-tauri-l"; + +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x00 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x00 + MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x00 + MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x00 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts index 27a902569e2a..ba6ce3c7f477 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -7,6 +7,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm-phycore-som.dtsi" / { @@ -185,6 +186,15 @@ status = "okay"; }; +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 8c0c6e715924..ca0205b9019e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -62,11 +62,15 @@ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <84000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi new file mode 100644 index 000000000000..d3b21203c5f4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi @@ -0,0 +1,679 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2018 CompuLab + +/dts-v1/; + +#include "imx8mm.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + mmc0 = &usdhc3; + }; + + chosen { + stdout-path = &uart3; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 3000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <222>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + heartbeat-led { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + wlreg_on: regulator-wlreg-on { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlreg_on"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-always-on; + status = "okay"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + regulator-usdhc3rst { + compatible = "regulator-fixed"; + regulator-name = "usdhc3_rst"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + regulator-always-on; + enable-active-high; + }; + + regulator-fec1rst { + compatible = "regulator-fixed"; + regulator-name = "fec1_rst"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + regulator-always-on; + enable-active-high; + startup-delay-us = <500>; + regulator-boot-on; + }; +}; + +&A53_0 { + arm-supply = <&buck2>; +}; + +&cpu_alert0 { + temperature = <105000>; +}; + +&cpu_crit0 { + temperature = <115000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + reg = <0x4b>; + compatible = "rohm,bd71837"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + #clock-cells = <0>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc_i2c: rtc@69 { + compatible = "abracon,ab1805"; + reg = <0x69>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_backlight>; + status = "okay"; +}; + +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <49152000>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + status = "disabled"; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MM_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; + status = "disabled"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>; + max-speed = <3000000>; + device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + disable-over-current; + status = "disabled"; +}; + +&usbotg2 { + dr_mode = "host"; + hnp-disable; + srp-disable; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + bus-width = <4>; + non-removable; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + no-1-8-v; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x190 + >; + }; + + pinctrl_bt: bt0grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 /* BT_REG_ON */ + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 /* BT_DEV_WU */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 /* BT_HST_WU */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_pwm_backlight: pwmbacklightgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x03 + >; + }; + + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x140 + MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x140 + MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1grpgpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x00 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index de7f67a4ff2a..36803b038cd5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> / { @@ -113,6 +114,25 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 35ae0faa815b..136cb30df03a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -364,8 +364,6 @@ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index c11260c26d0b..1d56f2a6c06a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -314,8 +314,6 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index db1737bf637d..45470160f98f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -280,8 +280,6 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index 05489a31e7fd..ef951bc9f0dd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -330,8 +330,6 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 98544741ce17..5fa395914191 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -228,15 +228,16 @@ pinctrl-0 = <&pinctrl_ecspi2>; }; -/* Verdin CAN_1 (On-module) */ +/* On-module SPI */ &ecspi3 { #address-cells = <1>; #size-cells = <0>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; + pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>; status = "okay"; + /* Verdin CAN_1 */ can1: can@0 { compatible = "microchip,mcp251xfd"; clocks = <&clk40m>; @@ -246,6 +247,12 @@ reg = <0>; spi-max-frequency = <8500000>; }; + + verdin_som_tpm: tpm@1 { + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; /* Verdin ETH_1 (On-module PHY) */ @@ -548,7 +555,7 @@ /* Verdin I2C_2_DSI */ &i2c2 { - clock-frequency = <10000>; + clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -808,8 +815,7 @@ pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio7>, <&pinctrl_gpio8>, - <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, - <&pinctrl_pmic_tpm_ena>; + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>; pinctrl_can1_int: can1intgrp { fsl,pins = @@ -1111,7 +1117,7 @@ }; /* control signal for optional ATTPM20P or SE050 */ - pinctrl_pmic_tpm_ena: pmictpmenagrp { + pinctrl_tpm_spi_cs: tpmspicsgrp { fsl,pins = <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x106>; /* PMIC_TPM_ENA */ }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index fb24b9aa1b93..e68a3fd73e17 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -60,11 +60,15 @@ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <84000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 0b1fa04f1d67..72004ab6bda5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -312,8 +312,6 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index e5d3901f2913..17e2c19d8455 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -302,10 +302,18 @@ adv_bridge: hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + reg-names = "main"; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; + avdd-supply = <&buck5>; + dvdd-supply = <&buck5>; + pvdd-supply = <&buck5>; + a2vdd-supply = <&buck5>; + v1p2-supply = <&buck5>; + v3p3-supply = <&buck4>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi index 8be251b69378..15f7ab58db36 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi @@ -71,7 +71,6 @@ mtl_rx_setup: rx-queues-config { snps,rx-queues-to-use = <5>; - snps,rx-sched-sp; queue0 { snps,dcb-algorithm; @@ -106,7 +105,6 @@ mtl_tx_setup: tx-queues-config { snps,tx-queues-to-use = <5>; - snps,tx-sched-sp; queue0 { snps,dcb-algorithm; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 9b8f97a84e61..af02af9e5334 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -20,6 +20,18 @@ stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -94,6 +106,28 @@ }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -239,6 +273,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -356,6 +394,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 3b1c940860e0..ebdf13e97b4e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -69,6 +69,18 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "X38"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + led { compatible = "gpio-leds"; @@ -184,6 +196,33 @@ status = "okay"; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + &pcie_phy { clock-names = "ref"; clocks = <&hsio_blk_ctrl>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index ac7ec7533a3c..ef012e8365b1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -75,6 +75,18 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "X28"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + led { compatible = "gpio-leds"; @@ -248,6 +260,33 @@ status = "okay"; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + ddc-i2c-bus = <&i2cmuxed1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + &pcie_phy { clocks = <&pcieclk 1>; clock-names = "ref"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index f5115f9e8c47..a90e28c07e3f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -78,6 +78,11 @@ cpu-supply = <&buck2>; }; +&audio_blk_ctrl { + assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>; + assigned-clock-rates = <393216000>; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -105,14 +110,14 @@ #size-cells = <0>; /* Up to one of these two PHYs may be populated. */ - ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */ + ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; pinctrl-names = "default"; - reg = <0>; + reg = <1>; reset-assert-us = <1000>; reset-deassert-us = <1000>; reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>; @@ -151,14 +156,14 @@ #size-cells = <0>; /* Up to one PHY may be populated. */ - ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + ethphy1f: ethernet-phy@2 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio4>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy1>; pinctrl-names = "default"; - reg = <1>; + reg = <2>; reset-assert-us = <1000>; reset-deassert-us = <1000>; reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso new file mode 100644 index 000000000000..1b71890d43d5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ + +/dts-v1/; +/plugin/; + +&{/} { + panel-lvds { + compatible = "koe,tx26d202vm0bwa"; + backlight = <&backlight_lvds>; + power-supply = <®_vext_3v3>; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1200>; + hfront-porch = <130>; + hback-porch = <70>; + hsync-len = <30>; + vfront-porch = <5>; + vback-porch = <5>; + vsync-len = <5>; + de-active = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + panel_in_odd: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + panel_in_even: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; + }; +}; + +&backlight_lvds { + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_in_odd>; + }; + }; + + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel_in_even>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 8be5b2a57f27..938347704136 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -16,6 +16,16 @@ stdout-path = &uart2; }; + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 100000 0>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <100>; + power-supply = <®_per_12v>; + status = "disabled"; + }; + hdmi-connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -96,6 +106,15 @@ enable-active-high; }; + reg_per_12v: regulator-per-12v { + compatible = "regulator-fixed"; + regulator-name = "PER_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -114,6 +133,11 @@ regulator-max-microvolt = <3300000>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio"; @@ -145,6 +169,25 @@ }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-hdmi { compatible = "fsl,imx-audio-hdmi"; model = "audio-hdmi"; @@ -166,6 +209,19 @@ }; }; + sound-xcvr { + compatible = "fsl,imx-audio-card"; + model = "imx-audio-xcvr"; + + pri-dai-link { + link-name = "XCVR PCM"; + + cpu { + sound-dai = <&xcvr>; + }; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -251,7 +307,6 @@ mtl_tx_setup: tx-queues-config { snps,tx-queues-to-use = <5>; - snps,tx-sched-sp; queue0 { snps,dcb-algorithm; @@ -608,6 +663,17 @@ status = "okay"; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -694,7 +760,15 @@ status = "okay"; }; +&xcvr { + #sound-dai-cells = <0>; + status = "okay"; +}; + &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + pinctrl_audio_pwr_reg: audiopwrreggrp { fsl,pins = < MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0xd6 @@ -784,6 +858,12 @@ >; }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 @@ -880,6 +960,15 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index da4b1807c275..83194ea7cb81 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -46,6 +46,24 @@ }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + &i2c1 { sgtl5000: audio-codec@a { compatible = "fsl,sgtl5000"; @@ -92,6 +110,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_smarc_gpio>; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c2 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c2 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x10 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x10 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts new file mode 100644 index 000000000000..d7fd9d36f824 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts @@ -0,0 +1,906 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2023-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Martin Schmiedel + * Author: Alexander Stein + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-tqma8mpql.dtsi" + +/ { + model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MP-RAS314"; + compatible = "tq,imx8mp-tqma8mpql-mba8mp-ras314", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + chassis-type = "embedded"; + + chosen { + stdout-path = &uart4; + }; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + }; + + /* X8 */ + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_vcc_12v0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + /* X7 + X8 */ + display: display { + /* + * Display is not fixed, so compatible has to be added from + * DT overlay + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvdsdisplay>; + power-supply = <®_vcc_3v3>; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + backlight = <&backlight_lvds>; + status = "disabled"; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + label = "X9"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vcc_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "V_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x38000000>; + alloc-ranges = <0 0x40000000 0 0xB0000000>; + linux,cma-default; + }; + }; + + rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rfkill>; + label = "rfkill-pcie-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tq-mba8mp-ras314"; + audio-cpu = <&sai5>; + audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HPL", + "Headphone Jack", "HPR"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_phy>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + gpio-line-names = "WIFI_PMIC_EN", "LVDS_RESET#", "", "", + "", "", "GPIO8", "", + "", "", "", "", + "", "", "GPIO12", "GPIO13", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + + wifi-pmic-en-hog { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "WIFI_PMIC_EN"; + }; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = "GPIO22", "GPIO23", "GPIO24", "GPIO25", + "GPIO26", "GPIO27", "CAM_GPIO1", "CAM_GPIO2", + "", "", "GPIO1", "GPIO0", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3>; + + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "TEMP_EVENT#", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "HDMI_OC#", "GPIO14", "GPIO15", "GPIO16", + "GPIO17", "PCIE_WAKE#", "GPIO19", "GPIO20", + "PCIE_PERST#", "", "", ""; + + pewake-hog { + gpio-hog; + gpios = <25 0>; + input; + line-name = "PCIE_WAKE#"; + }; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpt1_gpio>, + <&pinctrl_gpt2_gpio>, <&pinctrl_gpt3_gpio>; + + gpio-line-names = "", "GPIO18", "", "GPIO3", + "GPIO2", "GPIO21", "", "", + "", "", "", "", + "", "", "", "", + "", "", "GPIO5", "GPIO6", + "", "", "GPIO11", "GPIO10", + "GPIO9", "GPIO7", "", "GPIO4", + "", "", "", ""; +}; + +&gpt1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpt1>; + status = "disabled"; +}; + +&gpt2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpt2>; + status = "disabled"; +}; + +&gpt3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpt3>; + status = "disabled"; +}; + +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +/* X5 + X6 Camera & Display interface */ +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* X1 ID_I2C */ +&i2c3 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio2 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tlv320aic3x04>; + reg = <0x18>; + clock-names = "mclk"; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + iov-supply = <®_vcc_3v3>; + ldoin-supply = <®_vcc_3v3>; + }; +}; + +/* X1 I2C */ +&i2c5 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* X1 I2C on GPIO24/GPIO25 */ +&i2c6 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c6>; + pinctrl-1 = <&pinctrl_i2c6_gpio>; + scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; +}; + +&lcdif3 { + status = "okay"; +}; + +&pcf85063 { + /* RTC_EVENT# is connected on MBa8MP-RAS314 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf85063>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; +}; + +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + assigned-clocks = <&clk IMX8MP_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* X1 UART1 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + assigned-clocks = <&clk IMX8MP_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MP_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart4 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_0 { + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; +}; + +/* X1 SD card on GPIO22-GPIO27 */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + disable-wp; + bus-width = <4>; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + no-mmc; + no-sdio; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x14>; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x140>, + <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x140>, + <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>, + <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x140>, + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140>; + }; + + pinctrl_ecspi3_gpio: ecspi3gpiogrp { + fsl,pins = <MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x80>, + <MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x80>, + <MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24 0x80>, + <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x80>, + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x80>; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>, + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>, + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>, + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>, + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>; + }; + + pinctrl_fec: fecgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>, + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>, + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x14>, + <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x14>; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x14>, + <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x14>; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = <MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00 0x94>, + <MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01 0x94>, + <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x94>, + <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x94>, + <MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04 0x94>, + <MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05 0x94>, + <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x94>, + <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x94>; + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x180>; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x80>, + /* PCIE_WAKE# */ + <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>, + <MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x94>, + <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x94>; + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x80>, + <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x80>; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>, + <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>, + <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>, + <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000154>; + }; + + pinctrl_gpt1: gpt1grp { + fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPT1_CLK 0x14>; + }; + + pinctrl_gpt1_gpio: gpt1gpiogrp { + fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x80>; + }; + + pinctrl_gpt2: gpt2grp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK 0x14>; + }; + + pinctrl_gpt2_gpio: gpt2gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x80>; + }; + + pinctrl_gpt3: gpt3grp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK 0x14>; + }; + + pinctrl_gpt3_gpio: gpt3gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x80>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>; + }; + + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL 0x400001e2>, + <MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA 0x400001e2>; + }; + + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x400001e2>, + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x400001e2>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL 0x400001e2>, + <MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA 0x400001e2>; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x400001e2>, + <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x400001e2>; + }; + + pinctrl_i2c5: i2c5grp { + fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001e2>, + <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001e2>; + }; + + pinctrl_i2c5_gpio: i2c5-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x400001e2>, + <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x400001e2>; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>; + }; + + pinctrl_i2c6_gpio: i2c6-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>; + }; + + pinctrl_pcf85063: pcf85063grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x80>; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x60>, + <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x94>; + }; + + pinctrl_lvdsdisplay: lvdsdisplaygrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x10>; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT 0x14>; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT 0x14>; + }; + + pinctrl_pwm3_gpio: pwm3grpiogrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT 0x14>; + }; + + pinctrl_pwm4_gpio: pwm4grpiogrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>; + }; + + pinctrl_rfkill: rfkillgrp { + fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x14>; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x94>, + <MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x94>, + <MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x94>, + <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x94>, + <MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x94>; + }; + + pinctrl_tlv320aic3x04: tlv320aic3x04grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x180>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x14>, + <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x14>, + <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x14>, + <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x14>; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x80>, + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x80>, + <MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x80>, + <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x80>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = <MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x14>, + <MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x14>, + <MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x14>, + <MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x14>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>, + <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x192>, + <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d2>, + <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d2>, + <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d2>, + <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d2>, + <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d2>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index c51ed7d991d1..ae64731266f3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -222,11 +222,6 @@ #size-cells = <2>; ranges; - ocram: ocram@900000 { - no-map; - reg = <0 0x900000 0 0x70000>; - }; - /* global autoconfigured region for contiguous allocations */ linux,cma { compatible = "shared-dma-pool"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index ebc29a950ba9..336785a9fba8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -45,12 +45,16 @@ flash0: flash@0 { reg = <0>; - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index 560c68e4da6d..6c75a5ecf56b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> / { @@ -102,6 +103,25 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index a77e9a44d9fa..d765b7972841 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -9,6 +9,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/phy/phy-imx8-pcie.h> +#include <dt-bindings/net/ti-dp83867.h> #include "imx8mp.dtsi" @@ -225,6 +226,29 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi index 6e6b9c2c4640..fbcd93e33aea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi @@ -4,6 +4,18 @@ */ / { + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "X21"; + type = "a"; + + port { + native_hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,bitclock-master = <&codec_dai>; @@ -94,6 +106,27 @@ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; }; +/* Verdin HDMI_1 */ +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&native_hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + /* Current measurement into module VCC */ &hwmon { status = "okay"; @@ -139,6 +172,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + /* Verdin PCIE_1 */ &pcie { vpcie-supply = <®_pcie>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index 42ed44a11711..09733fea036d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -4,6 +4,18 @@ */ / { + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "X37"; + type = "a"; + + port { + native_hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + reg_eth2phy: regulator-eth2phy { compatible = "regulator-fixed"; enable-active-high; @@ -103,6 +115,27 @@ vcc-supply = <®_1p8v>; }; +/* Verdin HDMI_1 */ +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&native_hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + /* Current measurement into module VCC */ &hwmon { status = "okay"; @@ -141,6 +174,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + /* Verdin PCIE_1 */ &pcie { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi index 1d15f7449c58..3a40338cf2d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi @@ -11,6 +11,18 @@ #include <dt-bindings/leds/common.h> / { + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "X14"; + type = "a"; + + port { + native_hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -91,6 +103,27 @@ status = "okay"; }; +/* Verdin HDMI_1 */ +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&native_hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + /* Temperature sensor on Mallow */ &hwmon_temp { compatible = "ti,tmp1075"; @@ -117,6 +150,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + /* Verdin PCIE_1 */ &pcie { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi index 91d597391b7c..2ee91f31e7f0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi @@ -41,8 +41,7 @@ pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio7>, <&pinctrl_gpio8>, - <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, - <&pinctrl_hdmi_hog>; + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>; }; /* diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi index ef94f9a57e20..efcab00c0142 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi @@ -55,8 +55,7 @@ pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio7>, <&pinctrl_gpio8>, - <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>, - <&pinctrl_hdmi_hog>; + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>; }; /* On-module Bluetooth */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi index a7b261ff3e4c..533b7fe218ce 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi @@ -6,6 +6,18 @@ #include <dt-bindings/leds/common.h> / { + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "J15"; + type = "a"; + + port { + native_hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + /* Carrier Board Supply +V1.8 */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; @@ -105,6 +117,27 @@ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; }; +/* Verdin HDMI_1 */ +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&native_hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &hwmon_temp { status = "okay"; }; @@ -127,6 +160,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + /* Verdin PCIE_1 */ &pcie { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index aef4bef4bccd..d23a3942174d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -241,7 +241,6 @@ mtl_rx_setup: rx-queues-config { snps,rx-queues-to-use = <5>; - snps,rx-sched-sp; queue0 { snps,dcb-algorithm; @@ -276,7 +275,6 @@ mtl_tx_setup: tx-queues-config { snps,tx-queues-to-use = <5>; - snps,tx-sched-sp; queue0 { snps,dcb-algorithm; @@ -457,6 +455,13 @@ "SODIMM_44"; }; +/* Verdin HDMI_1 */ +&hdmi_tx { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; +}; + /* On-module I2C */ &i2c1 { clock-frequency = <400000>; @@ -650,8 +655,7 @@ /* Verdin I2C_2_DSI */ &i2c2 { - /* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */ - clock-frequency = <10000>; + clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -1117,10 +1121,10 @@ <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x1c4>; /* SODIMM 252 */ }; - pinctrl_hdmi_hog: hdmihoggrp { + pinctrl_hdmi: hdmigrp { fsl,pins = - <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>, /* SODIMM 63 */ - <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>; /* SODIMM 61 */ + <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x140>, /* SODIMM 63 */ + <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x180>; /* SODIMM 61 */ }; /* On-module I2C */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index b92abb5a5c53..603dfe80216f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -789,6 +789,23 @@ reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; }; + pgc_mlmix: power-domain@4 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MLMIX>; + clocks = <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>, + <&clk IMX8MP_CLK_NPU_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>, + <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, + <800000000>, + <300000000>; + }; + pgc_audio: power-domain@5 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>; @@ -821,6 +838,12 @@ assigned-clock-rates = <800000000>, <400000000>; }; + pgc_vpumix: power-domain@8 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_VPUMIX>; + clocks = <&clk IMX8MP_CLK_VPU_ROOT>; + }; + pgc_gpu3d: power-domain@9 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_GPU3D>; @@ -836,6 +859,28 @@ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; }; + pgc_vpu_g1: power-domain@11 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_G1>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + }; + + pgc_vpu_g2: power-domain@12 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_G2>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + + }; + + pgc_vpu_vc8000e: power-domain@13 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>; + clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; + }; + pgc_hdmimix: power-domain@14 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>; @@ -873,50 +918,6 @@ reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>; }; - - pgc_vpumix: power-domain@19 { - #power-domain-cells = <0>; - reg = <IMX8MP_POWER_DOMAIN_VPUMIX>; - clocks = <&clk IMX8MP_CLK_VPU_ROOT>; - }; - - pgc_vpu_g1: power-domain@20 { - #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; - reg = <IMX8MP_POWER_DOMAIN_VPU_G1>; - clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; - }; - - pgc_vpu_g2: power-domain@21 { - #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; - reg = <IMX8MP_POWER_DOMAIN_VPU_G2>; - clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - }; - - pgc_vpu_vc8000e: power-domain@22 { - #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; - reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>; - clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; - }; - - pgc_mlmix: power-domain@24 { - #power-domain-cells = <0>; - reg = <IMX8MP_POWER_DOMAIN_MLMIX>; - clocks = <&clk IMX8MP_CLK_ML_AXI>, - <&clk IMX8MP_CLK_ML_AHB>, - <&clk IMX8MP_CLK_NPU_ROOT>; - assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>, - <&clk IMX8MP_CLK_ML_AXI>, - <&clk IMX8MP_CLK_ML_AHB>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>; - assigned-clock-rates = <800000000>, - <800000000>, - <300000000>; - }; }; }; }; @@ -1540,6 +1541,31 @@ dma-names = "tx"; status = "disabled"; }; + + xcvr: xcvr@30cc0000 { + compatible = "fsl,imx8mp-xcvr"; + reg = <0x30cc0000 0x800>, + <0x30cc0800 0x400>, + <0x30cc0c00 0x080>, + <0x30cc0e00 0x080>; + reg-names = "ram", "regs", "rxfifo", + "txfifo"; + interrupts = /* XCVR IRQ 0 */ + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + /* XCVR IRQ 1 */ + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + /* XCVR PHY - SPDIF wakeup IRQ */ + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_IPG>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_PHY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; + dma-names = "rx", "tx"; + resets = <&audio_blk_ctrl 0>; + status = "disabled"; + }; }; sdma3: dma-controller@30e00000 { @@ -1568,6 +1594,7 @@ compatible = "fsl,imx8mp-audio-blk-ctrl"; reg = <0x30e20000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, <&clk IMX8MP_CLK_SAI1>, <&clk IMX8MP_CLK_SAI2>, @@ -1579,6 +1606,9 @@ "sai1", "sai2", "sai3", "sai5", "sai6", "sai7"; power-domains = <&pgc_audio>; + assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, + <&clk IMX8MP_AUDIO_PLL2>; + assigned-clock-rates = <393216000>, <361267200>; }; }; @@ -1946,7 +1976,7 @@ }; irqsteer_hdmi: interrupt-controller@32fc2000 { - compatible = "fsl,imx-irqsteer"; + compatible = "fsl,imx8mp-irqsteer", "fsl,imx-irqsteer"; reg = <0x32fc2000 0x1000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index ffb5fe61630d..1b39514d5c12 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -45,7 +45,6 @@ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <50>; - wakeup-source; }; key-vol-up { @@ -53,7 +52,6 @@ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <50>; - wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 5ca6b2252546..01e5092e4c40 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -251,11 +251,15 @@ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <84000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 6e05361c1ffb..778741dbbb33 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -40,12 +40,99 @@ enable-active-high; }; + reg_fec2_supply: regulator-fec2-nvcc { + compatible = "regulator-fixed"; + regulator-name = "fec2_nvcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can01_en: regulator-can01-gen { + compatible = "regulator-fixed"; + regulator-name = "can01-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_en: regulator-can2-gen { + compatible = "regulator-fixed"; + regulator-name = "can2-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can01_stby: regulator-can01-stby { + compatible = "regulator-fixed"; + regulator-name = "can01-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can01_en>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can2_en>; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + bt_sco_codec: audio-codec-bt { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai0>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-wm8960 { + compatible = "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8960>; + hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; }; &adc0 { @@ -55,6 +142,78 @@ status = "okay"; }; +&amix { + status = "okay"; +}; + +&asrc0 { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + +&cm41_i2c { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cm41_i2c>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&cm41_intmux { + status = "okay"; +}; + +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lsm303agr-accel"; + reg = <0x19>; + }; + + gyrometer@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; + + gyrometer@69 { + compatible = "st,l3g4200d-gyro"; + reg = <0x69>; + }; +}; + &i2c1 { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +224,42 @@ scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>; status = "okay"; + + wm8960: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; + xceiver-supply = <®_can2_stby>; + status = "okay"; }; &lpuart0 { @@ -100,6 +295,14 @@ }; }; +&lsio_mu5 { + status = "okay"; +}; + +&lsio_mu6 { + status = "okay"; +}; + &flexspi0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi0>; @@ -140,6 +343,19 @@ }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-txid"; + phy-handle = <ðphy1>; + phy-supply = <®_fec2_supply>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + rx-internal-delay-ps = <2000>; + fsl,magic-packet; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -160,7 +376,71 @@ status = "okay"; }; +&sai0 { + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai0_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai0>; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai6 { + assigned-clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>, + <&sai6_lpcg IMX_LPCG_CLK_4>; + assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>; + fsl,sai-asynchronous; + status = "okay"; +}; + +&sai7 { + assigned-clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>, + <&sai7_lpcg IMX_LPCG_CLK_4>; + assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>; + fsl,sai-asynchronous; + status = "okay"; +}; + &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0x0600004c + IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021 + IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x06000021 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c @@ -181,6 +461,13 @@ >; }; + pinctrl_cm41_i2c: cm41i2cgrp { + fsl,pins = < + IMX8QM_M41_I2C0_SDA_M41_I2C0_SDA 0x0600004c + IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL 0x0600004c + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 @@ -235,6 +522,45 @@ >; }; + pinctrl_fec2: fec2grp { + fsl,pins = < + IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 + IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 + IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 + IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 + IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 + IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 + IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 + IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 + IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 + IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 + IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x21 + >; + }; + + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x21 + IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x21 + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x21 + IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x21 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 @@ -256,6 +582,24 @@ >; }; + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c + IMX8QM_SPI2_CS1_AUD_SAI0_TXFS 0x0600004c + IMX8QM_SAI1_RXFS_AUD_SAI0_RXD 0x0600004c + IMX8QM_SAI1_RXC_AUD_SAI0_TXD 0x0600006c + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX8QM_SAI1_RXD_AUD_SAI1_RXD 0x06000040 + IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS 0x06000040 + IMX8QM_SAI1_TXD_AUD_SAI1_TXD 0x06000060 + IMX8QM_SAI1_TXC_AUD_SAI1_TXC 0x06000040 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi new file mode 100644 index 000000000000..3036af49fc85 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +/delete-node/ &acm; +/delete-node/ &sai4; +/delete-node/ &sai5; +/delete-node/ &sai4_lpcg; +/delete-node/ &sai5_lpcg; + +&amix { + dais = <&sai6>, <&sai7>; +}; + +&asrc0 { + clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>, + <&asrc0_lpcg IMX_LPCG_CLK_2>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>, + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_ASRC_0>; +}; + +&asrc0_lpcg { + clocks = <&audio_ipg_clk>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>; + clock-output-names = "asrc0_lpcg_ipg_clk", "asrc0_lpcg_mem_clk"; +}; + +&asrc1 { + clocks = <&asrc1_lpcg IMX_LPCG_CLK_0>, + <&asrc1_lpcg IMX_LPCG_CLK_2>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>, + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_ASRC_1>; +}; + +&asrc1_lpcg { + clocks = <&audio_ipg_clk>, <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>; + clock-output-names = "asrc1_lpcg_ipg_clk", "asrc1_lpcg_mem_clk"; +}; + +&audio_subsys { + + sai4: sai@59080000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59080000 0x10000>; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai4_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai4_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx"; + dmas = <&edma0 18 0 1>; + fsl,dataline = <0 0xf 0x0>; + power-domains = <&pd IMX_SC_R_SAI_4>; + status = "disabled"; + }; + + sai5: sai@59090000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59090000 0x10000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai5_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai5_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "tx"; + dmas = <&edma0 19 0 0>; + fsl,dataline = <0 0x0 0xf>; + power-domains = <&pd IMX_SC_R_SAI_5>; + status = "disabled"; + }; + + sai4_lpcg: clock-controller@59480000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59480000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai4_lpcg_mclk", "sai4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_4>; + status = "disabled"; + }; + + sai5_lpcg: clock-controller@59490000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59490000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai5_lpcg_mclk", "sai5_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_5>; + status = "disabled"; + }; + + esai1: esai@59810000 { + compatible = "fsl,imx8qm-esai"; + reg = <0x59810000 0x10000>; + interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&esai1_lpcg IMX_LPCG_CLK_0>, + <&esai1_lpcg IMX_LPCG_CLK_4>, + <&esai1_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>; + clock-names = "core", "extal", "fsys", "spba"; + dmas = <&edma1 6 0 1>, <&edma1 7 0 0>; + dma-names = "rx", "tx"; + power-domains = <&pd IMX_SC_R_ESAI_1>; + status = "disabled"; + }; + + sai6: sai@59820000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59820000 0x10000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai6_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai6_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&edma1 8 0 1>, <&edma1 9 0 0>; + power-domains = <&pd IMX_SC_R_SAI_6>; + status = "disabled"; + }; + + sai7: sai@59830000 { + compatible = "fsl,imx8qm-sai"; + reg = <0x59830000 0x10000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sai7_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai7_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "tx"; + dmas = <&edma1 10 0 0>; + power-domains = <&pd IMX_SC_R_SAI_7>; + status = "disabled"; + }; + + esai1_lpcg: clock-controller@59c10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59c10000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_ESAI1_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "esai1_lpcg_extal_clk", "esai1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_ESAI_1>; + }; + + sai6_lpcg: clock-controller@59c20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59c20000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai6_lpcg_mclk", "sai6_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_6>; + }; + + sai7_lpcg: clock-controller@59c30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59c30000 0x10000>; + #clock-cells = <1>; + clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai7_lpcg_mclk", "sai7_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SAI_7>; + }; + + acm: acm@59e00000 { + compatible = "fsl,imx8qm-acm"; + reg = <0x59e00000 0x1d0000>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_ASRC_1>, + <&pd IMX_SC_R_ESAI_0>, + <&pd IMX_SC_R_ESAI_1>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SAI_4>, + <&pd IMX_SC_R_SAI_5>, + <&pd IMX_SC_R_SAI_6>, + <&pd IMX_SC_R_SAI_7>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_SPDIF_1>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_mlb_clk>, + <&clk_hdmi_rx_mclk>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_esai0_rx_clk>, + <&clk_esai0_rx_hf_clk>, + <&clk_esai0_tx_clk>, + <&clk_esai0_tx_hf_clk>, + <&clk_esai1_rx_clk>, + <&clk_esai1_rx_hf_clk>, + <&clk_esai1_tx_clk>, + <&clk_esai1_tx_hf_clk>, + <&clk_spdif0_rx>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>, + <&clk_sai4_rx_bclk>, + <&clk_sai5_rx_bclk>, + <&clk_sai6_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "mlb_clk", + "hdmi_rx_mclk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "esai0_rx_clk", + "esai0_rx_hf_clk", + "esai0_tx_clk", + "esai0_tx_hf_clk", + "esai1_rx_clk", + "esai1_rx_hf_clk", + "esai1_tx_clk", + "esai1_tx_hf_clk", + "spdif0_rx", + "spdif1_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk", + "sai4_rx_bclk", + "sai5_tx_bclk", + "sai6_rx_bclk"; + }; +}; + +&dsp_lpcg { + status = "disabled"; +}; + +&dsp_ram_lpcg { + status = "disabled"; +}; + +/* edma2 called in imx8qm RM with the same address in edma0 of imx8qxp */ +&edma0{ + reg = <0x591f0000 0x150000>; + dma-channels = <20>; + dma-channel-mask = <0>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc0 */ + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */ + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */ + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, /* spdif1 */ + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */ + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */ + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */ + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */ + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */ + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */ + power-domains = <&pd IMX_SC_R_DMA_2_CH0>, + <&pd IMX_SC_R_DMA_2_CH1>, + <&pd IMX_SC_R_DMA_2_CH2>, + <&pd IMX_SC_R_DMA_2_CH3>, + <&pd IMX_SC_R_DMA_2_CH4>, + <&pd IMX_SC_R_DMA_2_CH5>, + <&pd IMX_SC_R_DMA_2_CH6>, + <&pd IMX_SC_R_DMA_2_CH7>, + <&pd IMX_SC_R_DMA_2_CH8>, + <&pd IMX_SC_R_DMA_2_CH9>, + <&pd IMX_SC_R_DMA_2_CH10>, + <&pd IMX_SC_R_DMA_2_CH11>, + <&pd IMX_SC_R_DMA_2_CH12>, + <&pd IMX_SC_R_DMA_2_CH13>, + <&pd IMX_SC_R_DMA_2_CH14>, + <&pd IMX_SC_R_DMA_2_CH15>, + <&pd IMX_SC_R_DMA_2_CH16>, + <&pd IMX_SC_R_DMA_2_CH17>, + <&pd IMX_SC_R_DMA_2_CH18>, + <&pd IMX_SC_R_DMA_2_CH19>; +}; + +/* edma3 called in imx8qm RM with the same address in edma1 of imx8qxp */ +&edma1{ + reg = <0x599f0000 0xc0000>; + dma-channels = <11>; + dma-channel-mask = <0xc0>; + interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc1 */ + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */ + power-domains = <&pd IMX_SC_R_DMA_3_CH0>, + <&pd IMX_SC_R_DMA_3_CH1>, + <&pd IMX_SC_R_DMA_3_CH2>, + <&pd IMX_SC_R_DMA_3_CH3>, + <&pd IMX_SC_R_DMA_3_CH4>, + <&pd IMX_SC_R_DMA_3_CH5>, + <&pd IMX_SC_R_DMA_3_CH6>, + <&pd IMX_SC_R_DMA_3_CH7>, + <&pd IMX_SC_R_DMA_3_CH8>, + <&pd IMX_SC_R_DMA_3_CH9>, + <&pd IMX_SC_R_DMA_3_CH10>; +}; + +&esai0 { + clocks = <&esai0_lpcg IMX_LPCG_CLK_0>, + <&esai0_lpcg IMX_LPCG_CLK_4>, + <&esai0_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_ESAI_0>; +}; + +&esai0_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "esai0_lpcg_extal_clk", "esai0_lpcg_ipg_clk"; +}; + +&mqs0_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "mqs0_lpcg_mclk", "mqs0_lpcg_ipg_clk"; +}; + +&sai0 { + clocks = <&sai0_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai0_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_SAI_0>; +}; + +&sai0_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai0_lpcg_mclk", "sai0_lpcg_ipg_clk"; +}; + +&sai1 { + clocks = <&sai1_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai1_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_SAI_1>; +}; + +&sai1_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai1_lpcg_mclk", "sai1_lpcg_ipg_clk"; +}; + +&sai2 { + clocks = <&sai2_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai2_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_SAI_2>; +}; + +&sai2_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai2_lpcg_mclk", "sai2_lpcg_ipg_clk"; +}; + +&sai3 { + clocks = <&sai3_lpcg IMX_LPCG_CLK_0>, + <&clk_dummy>, + <&sai3_lpcg IMX_LPCG_CLK_4>, + <&clk_dummy>, + <&clk_dummy>; + power-domains = <&pd IMX_SC_R_SAI_3>; +}; + +&sai3_lpcg { + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>; + clock-output-names = "sai3_lpcg_mclk", "sai3_lpcg_ipg_clk"; +}; + +&spdif0 { + clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>, /* core */ + <&clk_dummy>, /* rxtx0 */ + <&spdif0_lpcg IMX_LPCG_CLK_5>, /* rxtx1 */ + <&clk_dummy>, /* rxtx2 */ + <&clk_dummy>, /* rxtx3 */ + <&clk_dummy>, /* rxtx4 */ + <&audio_ipg_clk>, /* rxtx5 */ + <&clk_dummy>, /* rxtx6 */ + <&clk_dummy>, /* rxtx7 */ + <&clk_dummy>; /* spba */ + power-domains = <&pd IMX_SC_R_SPDIF_0>; +}; + +&spdif0_lpcg { + clock-indices = <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_4>; + clock-output-names = "spdif0_lpcg_tx_clk", "spdif0_lpcg_gclkw"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index b3d01677b70c..61986e0639e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -333,6 +333,21 @@ compatible = "fsl,imx8qxp-sc-rtc"; }; + ocotp: ocotp { + compatible = "fsl,imx8qm-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + read-only; + + fec_mac0: mac@1c4 { + reg = <0x1c4 6>; + }; + + fec_mac1: mac@1c6 { + reg = <0x1c6 6>; + }; + }; + tsens: thermal-sensor { compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; #thermal-sensor-cells = <1>; @@ -461,8 +476,95 @@ }; }; + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + + clk_esai1_rx_clk: clock-esai1-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai1_rx_clk"; + }; + + clk_esai1_rx_hf_clk: clock-esai1-rx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai1_rx_hf_clk"; + }; + + clk_esai1_tx_clk: clock-esai1-tx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai1_tx_clk"; + }; + + clk_esai1_tx_hf_clk: clock-esai1-tx-hf { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "esai1_tx_hf_clk"; + }; + + clk_hdmi_rx_mclk: clock-hdmi-rx-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "hdmi-rx-mclk"; + }; + + clk_mlb_clk: clock-mlb-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "mlb_clk"; + }; + + clk_sai5_rx_bclk: clock-sai5-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai5_rx_bclk"; + }; + + clk_sai5_tx_bclk: clock-sai5-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai5_tx_bclk"; + }; + + clk_sai6_rx_bclk: clock-sai6-rx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai6_rx_bclk"; + }; + + clk_sai6_tx_bclk: clock-sai6-tx-bclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "sai6_tx_bclk"; + }; + + clk_spdif1_rx: clock-spdif1-rx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "spdif1_rx"; + }; + /* sorted in register address */ + #include "imx8-ss-cm41.dtsi" + #include "imx8-ss-audio.dtsi" #include "imx8-ss-vpu.dtsi" + #include "imx8-ss-gpu0.dtsi" #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" @@ -473,3 +575,4 @@ #include "imx8qm-ss-dma.dtsi" #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" +#include "imx8qm-ss-audio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index cee13e58762c..936ba5ecdcac 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -63,6 +63,7 @@ }; &dsp { + memory-region = <&dsp_reserved>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index bd98eff4d685..a15987f49e8d 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -97,89 +97,6 @@ status = "okay"; }; -&mu1 { - status = "okay"; -}; - -&mu2 { - status = "okay"; -}; - -&lpi2c3 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpi2c3>; - status = "okay"; - - ptn5110: tcpc@50 { - compatible = "nxp,ptn5110", "tcpci"; - reg = <0x50>; - interrupt-parent = <&gpio3>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - - typec1_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - data-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - op-sink-microwatt = <15000000>; - self-powered; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - }; - }; - }; - - ptn5110_2: tcpc@51 { - compatible = "nxp,ptn5110", "tcpci"; - reg = <0x51>; - interrupt-parent = <&gpio3>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - - typec2_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - data-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - op-sink-microwatt = <15000000>; - self-powered; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - typec2_dr_sw: endpoint { - remote-endpoint = <&usb2_drd_sw>; - }; - }; - }; - }; - }; -}; - &eqos { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_eqos>; @@ -228,81 +145,6 @@ }; }; -&lpuart1 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&lpuart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - disable-over-current; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usbotg2 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - disable-over-current; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - status = "okay"; - - port { - usb2_drd_sw: endpoint { - remote-endpoint = <&typec2_dr_sw>; - }; - }; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_usdhc2_vmmc>; - bus-width = <4>; - status = "okay"; - no-mmc; -}; - -&wdog3 { - status = "okay"; -}; - &lpi2c2 { #address-cells = <1>; #size-cells = <0>; @@ -402,11 +244,79 @@ }; &lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c3>; status = "okay"; + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; + + ptn5110_2: tcpc@51 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x51>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + typec2_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec2_dr_sw: endpoint { + remote-endpoint = <&usb2_drd_sw>; + }; + }; + }; + }; + }; + pcf2131: rtc@53 { compatible = "nxp,pcf2131"; reg = <0x53>; @@ -415,6 +325,89 @@ }; }; +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usbotg2 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb2_drd_sw: endpoint { + remote-endpoint = <&typec2_dr_sw>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-mmc; +}; + +&wdog3 { + status = "okay"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts new file mode 100644 index 000000000000..950dece83c24 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright 2024 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx93.dtsi" + +/ { + model = "NXP i.MX93 9x9 Quick Start Board"; + compatible = "fsl,imx93-9x9-qsb", "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x10000000>; + linux,cma-default; + }; + + vdev0vring0: vdev0vring0@a4000000 { + reg = <0 0xa4000000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@a4008000 { + reg = <0 0xa4008000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@a4010000 { + reg = <0 0xa4010000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@a4018000 { + reg = <0 0xa4018000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@a4020000 { + compatible = "shared-dma-pool"; + reg = <0 0xa4020000 0 0x100000>; + no-map; + }; + + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "VREF_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_rpi_3v3: regulator-rpi { + compatible = "regulator-fixed"; + regulator-name = "VDD_RPI_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <12000>; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&cm33 { + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu1 0 1>, + <&mu1 1 1>, + <&mu1 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + realtek,clkout-disable; + }; + }; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; + + rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + interrupt-parent = <&pcal6524>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&lpi2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6524>; + }; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + interrupt-parent = <&pcal6524>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-mmc; + status = "okay"; +}; + +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_pcal6524: pcal6524grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts index af795ecf678b..852dd3d2eac7 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts @@ -303,6 +303,32 @@ reg = <0x1c>; }; + ptn5110: usb-typec@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + label = "X17"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + typec-power-opmode = "default"; + pd-disable; + self-powered; + + port { + typec_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + }; + }; + eeprom2: eeprom@54 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x54>; @@ -371,18 +397,6 @@ "WLAN_PERST#", "12V_EN"; /* - * Controls the on board USB Hub reset which is low - * active as reset signal. The output-low states, the - * signal is inactive, e.g. no reset - */ - usb-reset-hog { - gpio-hog; - gpios = <2 GPIO_ACTIVE_LOW>; - output-low; - line-name = "USB_RESET#"; - }; - - /* * Controls the WiFi card PD pin which is low active * as power down signal. The output-high states, the signal * is active, e.g. card is powered down @@ -492,6 +506,41 @@ status = "okay"; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + typec_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb424,2517"; + reg = <1>; + reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>; + vdd-supply = <®_3v3>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index eb3f4cfb6986..da8f19a646a9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -252,6 +252,32 @@ reg = <0x1c>; }; + ptn5110: usb-typec@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + label = "X17"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + typec-power-opmode = "default"; + pd-disable; + self-powered; + + port { + typec_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + }; + }; + eeprom2: eeprom@54 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x54>; @@ -433,6 +459,41 @@ pinctrl-0 = <&pinctrl_tpm5>; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + typec_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb424,2517"; + reg = <1>; + reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>; + vdd-supply = <®_3v3>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 9d2328c185c9..edbd8cad35bc 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -75,6 +75,12 @@ spi-max-frequency = <62000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts new file mode 100644 index 000000000000..d14a54ab4fd4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ + +/dts-v1/; + +#include "imx95.dtsi" + +/ { + model = "NXP i.MX95 19X19 board"; + compatible = "fsl,imx95-19x19-evk", "fsl,imx95"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; + }; + + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "PCIE_WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_slot_pwr: regulator-slot-pwr { + compatible = "regulator-fixed"; + regulator-name = "PCIe slot-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&i2c7_pcal6524 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VDD_SD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <12000>; + }; +}; + +&lpi2c7 { + clock-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c7>; + status = "okay"; + + i2c7_pcal6524: i2c7-gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_pcal6524>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&mu7 { + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_slot_pwr>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&wdog3 { + fsl,ext-reset-output; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl_i2c7_pcal6524: i2c7pcal6524grp { + fsl,pins = < + IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e + >; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e + IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x40000b9e + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e + IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-clock.h b/arch/arm64/boot/dts/freescale/imx95-clock.h new file mode 100644 index 000000000000..e1f91203e794 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-clock.h @@ -0,0 +1,187 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/* + * Copyright 2024 NXP + */ + +#ifndef __CLOCK_IMX95_H +#define __CLOCK_IMX95_H + +/* The index should match i.MX95 SCMI Firmware */ +#define IMX95_CLK_32K 1 +#define IMX95_CLK_24M 2 +#define IMX95_CLK_FRO 3 +#define IMX95_CLK_SYSPLL1_VCO 4 +#define IMX95_CLK_SYSPLL1_PFD0_UNGATED 5 +#define IMX95_CLK_SYSPLL1_PFD0 6 +#define IMX95_CLK_SYSPLL1_PFD0_DIV2 7 +#define IMX95_CLK_SYSPLL1_PFD1_UNGATED 8 +#define IMX95_CLK_SYSPLL1_PFD1 9 +#define IMX95_CLK_SYSPLL1_PFD1_DIV2 10 +#define IMX95_CLK_SYSPLL1_PFD2_UNGATED 11 +#define IMX95_CLK_SYSPLL1_PFD2 12 +#define IMX95_CLK_SYSPLL1_PFD2_DIV2 13 +#define IMX95_CLK_AUDIOPLL1_VCO 14 +#define IMX95_CLK_AUDIOPLL1 15 +#define IMX95_CLK_AUDIOPLL2_VCO 16 +#define IMX95_CLK_AUDIOPLL2 17 +#define IMX95_CLK_VIDEOPLL1_VCO 18 +#define IMX95_CLK_VIDEOPLL1 19 +#define IMX95_CLK_RESERVED20 20 +#define IMX95_CLK_RESERVED21 21 +#define IMX95_CLK_RESERVED22 22 +#define IMX95_CLK_RESERVED23 23 +#define IMX95_CLK_ARMPLL_VCO 24 +#define IMX95_CLK_ARMPLL_PFD0_UNGATED 25 +#define IMX95_CLK_ARMPLL_PFD0 26 +#define IMX95_CLK_ARMPLL_PFD1_UNGATED 27 +#define IMX95_CLK_ARMPLL_PFD1 28 +#define IMX95_CLK_ARMPLL_PFD2_UNGATED 29 +#define IMX95_CLK_ARMPLL_PFD2 30 +#define IMX95_CLK_ARMPLL_PFD3_UNGATED 31 +#define IMX95_CLK_ARMPLL_PFD3 32 +#define IMX95_CLK_DRAMPLL_VCO 33 +#define IMX95_CLK_DRAMPLL 34 +#define IMX95_CLK_HSIOPLL_VCO 35 +#define IMX95_CLK_HSIOPLL 36 +#define IMX95_CLK_LDBPLL_VCO 37 +#define IMX95_CLK_LDBPLL 38 +#define IMX95_CLK_EXT1 39 +#define IMX95_CLK_EXT2 40 + +#define IMX95_CCM_NUM_CLK_SRC 41 + +#define IMX95_CLK_ADC (IMX95_CCM_NUM_CLK_SRC + 0) +#define IMX95_CLK_TMU (IMX95_CCM_NUM_CLK_SRC + 1) +#define IMX95_CLK_BUSAON (IMX95_CCM_NUM_CLK_SRC + 2) +#define IMX95_CLK_CAN1 (IMX95_CCM_NUM_CLK_SRC + 3) +#define IMX95_CLK_I3C1 (IMX95_CCM_NUM_CLK_SRC + 4) +#define IMX95_CLK_I3C1SLOW (IMX95_CCM_NUM_CLK_SRC + 5) +#define IMX95_CLK_LPI2C1 (IMX95_CCM_NUM_CLK_SRC + 6) +#define IMX95_CLK_LPI2C2 (IMX95_CCM_NUM_CLK_SRC + 7) +#define IMX95_CLK_LPSPI1 (IMX95_CCM_NUM_CLK_SRC + 8) +#define IMX95_CLK_LPSPI2 (IMX95_CCM_NUM_CLK_SRC + 9) +#define IMX95_CLK_LPTMR1 (IMX95_CCM_NUM_CLK_SRC + 10) +#define IMX95_CLK_LPUART1 (IMX95_CCM_NUM_CLK_SRC + 11) +#define IMX95_CLK_LPUART2 (IMX95_CCM_NUM_CLK_SRC + 12) +#define IMX95_CLK_M33 (IMX95_CCM_NUM_CLK_SRC + 13) +#define IMX95_CLK_M33SYSTICK (IMX95_CCM_NUM_CLK_SRC + 14) +#define IMX95_CLK_MQS1 (IMX95_CCM_NUM_CLK_SRC + 15) +#define IMX95_CLK_PDM (IMX95_CCM_NUM_CLK_SRC + 16) +#define IMX95_CLK_SAI1 (IMX95_CCM_NUM_CLK_SRC + 17) +#define IMX95_CLK_SENTINEL (IMX95_CCM_NUM_CLK_SRC + 18) +#define IMX95_CLK_TPM2 (IMX95_CCM_NUM_CLK_SRC + 19) +#define IMX95_CLK_TSTMR1 (IMX95_CCM_NUM_CLK_SRC + 20) +#define IMX95_CLK_CAMAPB (IMX95_CCM_NUM_CLK_SRC + 21) +#define IMX95_CLK_CAMAXI (IMX95_CCM_NUM_CLK_SRC + 22) +#define IMX95_CLK_CAMCM0 (IMX95_CCM_NUM_CLK_SRC + 23) +#define IMX95_CLK_CAMISI (IMX95_CCM_NUM_CLK_SRC + 24) +#define IMX95_CLK_MIPIPHYCFG (IMX95_CCM_NUM_CLK_SRC + 25) +#define IMX95_CLK_MIPIPHYPLLBYPASS (IMX95_CCM_NUM_CLK_SRC + 26) +#define IMX95_CLK_MIPIPHYPLLREF (IMX95_CCM_NUM_CLK_SRC + 27) +#define IMX95_CLK_MIPITESTBYTE (IMX95_CCM_NUM_CLK_SRC + 28) +#define IMX95_CLK_A55 (IMX95_CCM_NUM_CLK_SRC + 29) +#define IMX95_CLK_A55MTRBUS (IMX95_CCM_NUM_CLK_SRC + 30) +#define IMX95_CLK_A55PERIPH (IMX95_CCM_NUM_CLK_SRC + 31) +#define IMX95_CLK_DRAMALT (IMX95_CCM_NUM_CLK_SRC + 32) +#define IMX95_CLK_DRAMAPB (IMX95_CCM_NUM_CLK_SRC + 33) +#define IMX95_CLK_DISPAPB (IMX95_CCM_NUM_CLK_SRC + 34) +#define IMX95_CLK_DISPAXI (IMX95_CCM_NUM_CLK_SRC + 35) +#define IMX95_CLK_DISPDP (IMX95_CCM_NUM_CLK_SRC + 36) +#define IMX95_CLK_DISPOCRAM (IMX95_CCM_NUM_CLK_SRC + 37) +#define IMX95_CLK_DISPUSB31 (IMX95_CCM_NUM_CLK_SRC + 38) +#define IMX95_CLK_DISP1PIX (IMX95_CCM_NUM_CLK_SRC + 39) +#define IMX95_CLK_DISP2PIX (IMX95_CCM_NUM_CLK_SRC + 40) +#define IMX95_CLK_DISP3PIX (IMX95_CCM_NUM_CLK_SRC + 41) +#define IMX95_CLK_GPUAPB (IMX95_CCM_NUM_CLK_SRC + 42) +#define IMX95_CLK_GPU (IMX95_CCM_NUM_CLK_SRC + 43) +#define IMX95_CLK_HSIOACSCAN480M (IMX95_CCM_NUM_CLK_SRC + 44) +#define IMX95_CLK_HSIOACSCAN80M (IMX95_CCM_NUM_CLK_SRC + 45) +#define IMX95_CLK_HSIO (IMX95_CCM_NUM_CLK_SRC + 46) +#define IMX95_CLK_HSIOPCIEAUX (IMX95_CCM_NUM_CLK_SRC + 47) +#define IMX95_CLK_HSIOPCIETEST160M (IMX95_CCM_NUM_CLK_SRC + 48) +#define IMX95_CLK_HSIOPCIETEST400M (IMX95_CCM_NUM_CLK_SRC + 49) +#define IMX95_CLK_HSIOPCIETEST500M (IMX95_CCM_NUM_CLK_SRC + 50) +#define IMX95_CLK_HSIOUSBTEST50M (IMX95_CCM_NUM_CLK_SRC + 51) +#define IMX95_CLK_HSIOUSBTEST60M (IMX95_CCM_NUM_CLK_SRC + 52) +#define IMX95_CLK_BUSM7 (IMX95_CCM_NUM_CLK_SRC + 53) +#define IMX95_CLK_M7 (IMX95_CCM_NUM_CLK_SRC + 54) +#define IMX95_CLK_M7SYSTICK (IMX95_CCM_NUM_CLK_SRC + 55) +#define IMX95_CLK_BUSNETCMIX (IMX95_CCM_NUM_CLK_SRC + 56) +#define IMX95_CLK_ENET (IMX95_CCM_NUM_CLK_SRC + 57) +#define IMX95_CLK_ENETPHYTEST200M (IMX95_CCM_NUM_CLK_SRC + 58) +#define IMX95_CLK_ENETPHYTEST500M (IMX95_CCM_NUM_CLK_SRC + 59) +#define IMX95_CLK_ENETPHYTEST667M (IMX95_CCM_NUM_CLK_SRC + 60) +#define IMX95_CLK_ENETREF (IMX95_CCM_NUM_CLK_SRC + 61) +#define IMX95_CLK_ENETTIMER1 (IMX95_CCM_NUM_CLK_SRC + 62) +#define IMX95_CLK_MQS2 (IMX95_CCM_NUM_CLK_SRC + 63) +#define IMX95_CLK_SAI2 (IMX95_CCM_NUM_CLK_SRC + 64) +#define IMX95_CLK_NOCAPB (IMX95_CCM_NUM_CLK_SRC + 65) +#define IMX95_CLK_NOC (IMX95_CCM_NUM_CLK_SRC + 66) +#define IMX95_CLK_NPUAPB (IMX95_CCM_NUM_CLK_SRC + 67) +#define IMX95_CLK_NPU (IMX95_CCM_NUM_CLK_SRC + 68) +#define IMX95_CLK_CCMCKO1 (IMX95_CCM_NUM_CLK_SRC + 69) +#define IMX95_CLK_CCMCKO2 (IMX95_CCM_NUM_CLK_SRC + 70) +#define IMX95_CLK_CCMCKO3 (IMX95_CCM_NUM_CLK_SRC + 71) +#define IMX95_CLK_CCMCKO4 (IMX95_CCM_NUM_CLK_SRC + 72) +#define IMX95_CLK_VPUAPB (IMX95_CCM_NUM_CLK_SRC + 73) +#define IMX95_CLK_VPU (IMX95_CCM_NUM_CLK_SRC + 74) +#define IMX95_CLK_VPUDSP (IMX95_CCM_NUM_CLK_SRC + 75) +#define IMX95_CLK_VPUJPEG (IMX95_CCM_NUM_CLK_SRC + 76) +#define IMX95_CLK_AUDIOXCVR (IMX95_CCM_NUM_CLK_SRC + 77) +#define IMX95_CLK_BUSWAKEUP (IMX95_CCM_NUM_CLK_SRC + 78) +#define IMX95_CLK_CAN2 (IMX95_CCM_NUM_CLK_SRC + 79) +#define IMX95_CLK_CAN3 (IMX95_CCM_NUM_CLK_SRC + 80) +#define IMX95_CLK_CAN4 (IMX95_CCM_NUM_CLK_SRC + 81) +#define IMX95_CLK_CAN5 (IMX95_CCM_NUM_CLK_SRC + 82) +#define IMX95_CLK_FLEXIO1 (IMX95_CCM_NUM_CLK_SRC + 83) +#define IMX95_CLK_FLEXIO2 (IMX95_CCM_NUM_CLK_SRC + 84) +#define IMX95_CLK_FLEXSPI1 (IMX95_CCM_NUM_CLK_SRC + 85) +#define IMX95_CLK_I3C2 (IMX95_CCM_NUM_CLK_SRC + 86) +#define IMX95_CLK_I3C2SLOW (IMX95_CCM_NUM_CLK_SRC + 87) +#define IMX95_CLK_LPI2C3 (IMX95_CCM_NUM_CLK_SRC + 88) +#define IMX95_CLK_LPI2C4 (IMX95_CCM_NUM_CLK_SRC + 89) +#define IMX95_CLK_LPI2C5 (IMX95_CCM_NUM_CLK_SRC + 90) +#define IMX95_CLK_LPI2C6 (IMX95_CCM_NUM_CLK_SRC + 91) +#define IMX95_CLK_LPI2C7 (IMX95_CCM_NUM_CLK_SRC + 92) +#define IMX95_CLK_LPI2C8 (IMX95_CCM_NUM_CLK_SRC + 93) +#define IMX95_CLK_LPSPI3 (IMX95_CCM_NUM_CLK_SRC + 94) +#define IMX95_CLK_LPSPI4 (IMX95_CCM_NUM_CLK_SRC + 95) +#define IMX95_CLK_LPSPI5 (IMX95_CCM_NUM_CLK_SRC + 96) +#define IMX95_CLK_LPSPI6 (IMX95_CCM_NUM_CLK_SRC + 97) +#define IMX95_CLK_LPSPI7 (IMX95_CCM_NUM_CLK_SRC + 98) +#define IMX95_CLK_LPSPI8 (IMX95_CCM_NUM_CLK_SRC + 99) +#define IMX95_CLK_LPTMR2 (IMX95_CCM_NUM_CLK_SRC + 100) +#define IMX95_CLK_LPUART3 (IMX95_CCM_NUM_CLK_SRC + 101) +#define IMX95_CLK_LPUART4 (IMX95_CCM_NUM_CLK_SRC + 102) +#define IMX95_CLK_LPUART5 (IMX95_CCM_NUM_CLK_SRC + 103) +#define IMX95_CLK_LPUART6 (IMX95_CCM_NUM_CLK_SRC + 104) +#define IMX95_CLK_LPUART7 (IMX95_CCM_NUM_CLK_SRC + 105) +#define IMX95_CLK_LPUART8 (IMX95_CCM_NUM_CLK_SRC + 106) +#define IMX95_CLK_SAI3 (IMX95_CCM_NUM_CLK_SRC + 107) +#define IMX95_CLK_SAI4 (IMX95_CCM_NUM_CLK_SRC + 108) +#define IMX95_CLK_SAI5 (IMX95_CCM_NUM_CLK_SRC + 109) +#define IMX95_CLK_SPDIF (IMX95_CCM_NUM_CLK_SRC + 110) +#define IMX95_CLK_SWOTRACE (IMX95_CCM_NUM_CLK_SRC + 111) +#define IMX95_CLK_TPM4 (IMX95_CCM_NUM_CLK_SRC + 112) +#define IMX95_CLK_TPM5 (IMX95_CCM_NUM_CLK_SRC + 113) +#define IMX95_CLK_TPM6 (IMX95_CCM_NUM_CLK_SRC + 114) +#define IMX95_CLK_TSTMR2 (IMX95_CCM_NUM_CLK_SRC + 115) +#define IMX95_CLK_USBPHYBURUNIN (IMX95_CCM_NUM_CLK_SRC + 116) +#define IMX95_CLK_USDHC1 (IMX95_CCM_NUM_CLK_SRC + 117) +#define IMX95_CLK_USDHC2 (IMX95_CCM_NUM_CLK_SRC + 118) +#define IMX95_CLK_USDHC3 (IMX95_CCM_NUM_CLK_SRC + 119) +#define IMX95_CLK_V2XPK (IMX95_CCM_NUM_CLK_SRC + 120) +#define IMX95_CLK_WAKEUPAXI (IMX95_CCM_NUM_CLK_SRC + 121) +#define IMX95_CLK_XSPISLVROOT (IMX95_CCM_NUM_CLK_SRC + 122) +#define IMX95_CLK_SEL_EXT (IMX95_CCM_NUM_CLK_SRC + 123 + 0) +#define IMX95_CLK_SEL_A55C0 (IMX95_CCM_NUM_CLK_SRC + 123 + 1) +#define IMX95_CLK_SEL_A55C1 (IMX95_CCM_NUM_CLK_SRC + 123 + 2) +#define IMX95_CLK_SEL_A55C2 (IMX95_CCM_NUM_CLK_SRC + 123 + 3) +#define IMX95_CLK_SEL_A55C3 (IMX95_CCM_NUM_CLK_SRC + 123 + 4) +#define IMX95_CLK_SEL_A55C4 (IMX95_CCM_NUM_CLK_SRC + 123 + 5) +#define IMX95_CLK_SEL_A55C5 (IMX95_CCM_NUM_CLK_SRC + 123 + 6) +#define IMX95_CLK_SEL_A55P (IMX95_CCM_NUM_CLK_SRC + 123 + 7) +#define IMX95_CLK_SEL_DRAM (IMX95_CCM_NUM_CLK_SRC + 123 + 8) +#define IMX95_CLK_SEL_TEMPSENSE (IMX95_CCM_NUM_CLK_SRC + 123 + 9) + +#endif /* __CLOCK_IMX95_H */ diff --git a/arch/arm64/boot/dts/freescale/imx95-pinfunc.h b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h new file mode 100644 index 000000000000..9f614eea7c86 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h @@ -0,0 +1,865 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright 2024 NXP + */ + +#ifndef __DTS_IMX95_PINFUNC_H +#define __DTS_IMX95_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define IMX95_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x0204 0x0610 0x00 0x00 +#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_MQS2_LEFT 0x0000 0x0204 0x0000 0x01 0x00 +#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_NETC_TMR_1588_ALARM1 0x0000 0x0204 0x0000 0x02 0x00 +#define IMX95_PAD_DAP_TDI__CAN2_TX 0x0000 0x0204 0x0000 0x03 0x00 +#define IMX95_PAD_DAP_TDI__FLEXIO2_FLEXIO_BIT30 0x0000 0x0204 0x0000 0x04 0x00 +#define IMX95_PAD_DAP_TDI__GPIO3_IO_BIT28 0x0000 0x0204 0x0000 0x05 0x00 +#define IMX95_PAD_DAP_TDI__LPUART5_RX 0x0000 0x0204 0x0570 0x06 0x00 + +#define IMX95_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x0208 0x0614 0x00 0x00 +#define IMX95_PAD_DAP_TMS_SWDIO__CAN4_TX 0x0004 0x0208 0x0000 0x02 0x00 +#define IMX95_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO_BIT31 0x0004 0x0208 0x0000 0x04 0x00 +#define IMX95_PAD_DAP_TMS_SWDIO__GPIO3_IO_BIT29 0x0004 0x0208 0x0000 0x05 0x00 +#define IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x0208 0x0000 0x06 0x00 + +#define IMX95_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x020C 0x060C 0x00 0x00 +#define IMX95_PAD_DAP_TCLK_SWCLK__CAN4_RX 0x0008 0x020C 0x044C 0x02 0x00 +#define IMX95_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO_BIT30 0x0008 0x020C 0x0460 0x04 0x00 +#define IMX95_PAD_DAP_TCLK_SWCLK__GPIO3_IO_BIT30 0x0008 0x020C 0x0000 0x05 0x00 +#define IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x020C 0x056C 0x06 0x00 + +#define IMX95_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x0210 0x0000 0x00 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_MQS2_RIGHT 0x000C 0x0210 0x0000 0x01 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_NETC_TMR_1588_ALARM 0x000C 0x0210 0x0000 0x02 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x0210 0x0444 0x03 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO_BIT31 0x000C 0x0210 0x0464 0x04 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__GPIO3_IO_BIT31 0x000C 0x0210 0x0000 0x05 0x00 +#define IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x0210 0x0574 0x06 0x00 + +#define IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0 0x0010 0x0214 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x0214 0x0504 0x11 0x00 +#define IMX95_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x0214 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x0214 0x0574 0x05 0x01 +#define IMX95_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x0214 0x0514 0x16 0x00 +#define IMX95_PAD_GPIO_IO00__FLEXIO1_FLEXIO_BIT0 0x0010 0x0214 0x0468 0x07 0x00 + +#define IMX95_PAD_GPIO_IO01__GPIO2_IO_BIT1 0x0014 0x0218 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x0218 0x0500 0x11 0x00 +#define IMX95_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x0218 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x0218 0x0570 0x05 0x01 +#define IMX95_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x0218 0x0510 0x16 0x00 +#define IMX95_PAD_GPIO_IO01__FLEXIO1_FLEXIO_BIT1 0x0014 0x0218 0x046C 0x07 0x00 + +#define IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2 0x0018 0x021C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x021C 0x050C 0x11 0x00 +#define IMX95_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x021C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x021C 0x056C 0x05 0x01 +#define IMX95_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x021C 0x051C 0x16 0x00 +#define IMX95_PAD_GPIO_IO02__FLEXIO1_FLEXIO_BIT2 0x0018 0x021C 0x0470 0x07 0x00 + +#define IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3 0x001C 0x0220 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x0220 0x0508 0x11 0x00 +#define IMX95_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x0220 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x0220 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x0220 0x0518 0x16 0x00 +#define IMX95_PAD_GPIO_IO03__FLEXIO1_FLEXIO_BIT3 0x001C 0x0220 0x0474 0x07 0x00 + +#define IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x0020 0x0224 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x0224 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO04__AONMIX_TOP_PDM_CLK 0x0020 0x0224 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO04__CAN4_TX 0x0020 0x0224 0x0000 0x03 0x00 +#define IMX95_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x0224 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x0224 0x0580 0x05 0x01 +#define IMX95_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x0224 0x051C 0x16 0x01 +#define IMX95_PAD_GPIO_IO04__FLEXIO1_FLEXIO_BIT4 0x0020 0x0224 0x0478 0x07 0x00 + +#define IMX95_PAD_GPIO_IO05__GPIO2_IO_BIT5 0x0024 0x0228 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x0228 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO05__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x0024 0x0228 0x040C 0x02 0x01 +#define IMX95_PAD_GPIO_IO05__CAN4_RX 0x0024 0x0228 0x044C 0x03 0x01 +#define IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x0228 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x0228 0x057C 0x05 0x01 +#define IMX95_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x0228 0x0518 0x16 0x01 +#define IMX95_PAD_GPIO_IO05__FLEXIO1_FLEXIO_BIT5 0x0024 0x0228 0x047C 0x07 0x00 + +#define IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6 0x0028 0x022C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x022C 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO06__AONMIX_TOP_PDM_BIT_STREAM_BIT1 0x0028 0x022C 0x0410 0x02 0x01 +#define IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x022C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x022C 0x0578 0x05 0x01 +#define IMX95_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x022C 0x0524 0x16 0x00 +#define IMX95_PAD_GPIO_IO06__FLEXIO1_FLEXIO_BIT6 0x0028 0x022C 0x0480 0x07 0x00 + +#define IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7 0x002C 0x0230 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x0230 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x0230 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x0230 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x0230 0x0520 0x16 0x00 +#define IMX95_PAD_GPIO_IO07__FLEXIO1_FLEXIO_BIT7 0x002C 0x0230 0x0484 0x07 0x00 + +#define IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8 0x0030 0x0234 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x0234 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x0234 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x0234 0x0588 0x05 0x01 +#define IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x0234 0x0524 0x16 0x01 +#define IMX95_PAD_GPIO_IO08__FLEXIO1_FLEXIO_BIT8 0x0030 0x0234 0x0488 0x07 0x00 + +#define IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9 0x0034 0x0238 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x0238 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x0238 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x0238 0x0584 0x05 0x01 +#define IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x0238 0x0520 0x16 0x01 +#define IMX95_PAD_GPIO_IO09__FLEXIO1_FLEXIO_BIT9 0x0034 0x0238 0x048C 0x07 0x00 + +#define IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10 0x0038 0x023C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x023C 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x023C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x023C 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x023C 0x052C 0x16 0x00 +#define IMX95_PAD_GPIO_IO10__FLEXIO1_FLEXIO_BIT10 0x0038 0x023C 0x0490 0x07 0x00 + +#define IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x003C 0x0240 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x0240 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x0240 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x0240 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x0240 0x0528 0x16 0x00 +#define IMX95_PAD_GPIO_IO11__FLEXIO1_FLEXIO_BIT11 0x003C 0x0240 0x0494 0x07 0x00 + +#define IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12 0x0040 0x0244 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x0244 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO12__AONMIX_TOP_PDM_BIT_STREAM_BIT2 0x0040 0x0244 0x0414 0x02 0x00 +#define IMX95_PAD_GPIO_IO12__FLEXIO1_FLEXIO_BIT12 0x0040 0x0244 0x0498 0x03 0x00 +#define IMX95_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x0244 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x0244 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x0244 0x052C 0x16 0x01 +#define IMX95_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x0244 0x0590 0x07 0x00 + +#define IMX95_PAD_GPIO_IO13__GPIO2_IO_BIT13 0x0044 0x0248 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x0248 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO13__AONMIX_TOP_PDM_BIT_STREAM_BIT3 0x0044 0x0248 0x0418 0x02 0x00 +#define IMX95_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x0248 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x0248 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x0248 0x0528 0x16 0x01 +#define IMX95_PAD_GPIO_IO13__FLEXIO1_FLEXIO_BIT13 0x0044 0x0248 0x049C 0x07 0x00 + +#define IMX95_PAD_GPIO_IO14__GPIO2_IO_BIT14 0x0048 0x024C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x024C 0x055C 0x01 0x01 +#define IMX95_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x024C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x024C 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x024C 0x0568 0x06 0x01 +#define IMX95_PAD_GPIO_IO14__FLEXIO1_FLEXIO_BIT14 0x0048 0x024C 0x04A0 0x07 0x00 + +#define IMX95_PAD_GPIO_IO15__GPIO2_IO_BIT15 0x004C 0x0250 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x0250 0x0558 0x01 0x01 +#define IMX95_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x0250 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x0250 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x0250 0x0564 0x06 0x01 +#define IMX95_PAD_GPIO_IO15__FLEXIO1_FLEXIO_BIT15 0x004C 0x0250 0x04A4 0x07 0x00 + +#define IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16 0x0050 0x0254 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0254 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO16__AONMIX_TOP_PDM_BIT_STREAM_BIT2 0x0050 0x0254 0x0414 0x02 0x01 +#define IMX95_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0254 0x0554 0x04 0x01 +#define IMX95_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0254 0x0538 0x05 0x01 +#define IMX95_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0254 0x0560 0x06 0x01 +#define IMX95_PAD_GPIO_IO16__FLEXIO1_FLEXIO_BIT16 0x0050 0x0254 0x04A8 0x07 0x00 + +#define IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17 0x0054 0x0258 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0258 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0258 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0258 0x0534 0x05 0x01 +#define IMX95_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0258 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO17__FLEXIO1_FLEXIO_BIT17 0x0054 0x0258 0x04AC 0x07 0x00 + +#define IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x0058 0x025C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x025C 0x058C 0x01 0x00 +#define IMX95_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x025C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x025C 0x0530 0x05 0x01 +#define IMX95_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x025C 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO18__FLEXIO1_FLEXIO_BIT18 0x0058 0x025C 0x04B0 0x07 0x00 + +#define IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19 0x005C 0x0260 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x0260 0x0590 0x01 0x01 +#define IMX95_PAD_GPIO_IO19__AONMIX_TOP_PDM_BIT_STREAM_BIT3 0x005C 0x0260 0x0418 0x02 0x01 +#define IMX95_PAD_GPIO_IO19__FLEXIO1_FLEXIO_BIT19 0x005C 0x0260 0x04B4 0x03 0x00 +#define IMX95_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x0260 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x0260 0x0540 0x05 0x01 +#define IMX95_PAD_GPIO_IO19__TPM6_CH2 0x005C 0x0260 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0 0x005C 0x0260 0x0000 0x07 0x00 + +#define IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20 0x0060 0x0264 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x0060 0x0264 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO20__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x0060 0x0264 0x040C 0x02 0x02 +#define IMX95_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0264 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0264 0x0544 0x05 0x01 +#define IMX95_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0264 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO20__FLEXIO1_FLEXIO_BIT20 0x0060 0x0264 0x04B8 0x07 0x00 + +#define IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21 0x0064 0x0268 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x0064 0x0268 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO21__AONMIX_TOP_PDM_CLK 0x0064 0x0268 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO21__FLEXIO1_FLEXIO_BIT21 0x0064 0x0268 0x04BC 0x03 0x00 +#define IMX95_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0268 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0268 0x053C 0x05 0x01 +#define IMX95_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0268 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0268 0x058C 0x07 0x01 + +#define IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22 0x0068 0x026C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x026C 0x05C8 0x01 0x00 +#define IMX95_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x026C 0x0454 0x02 0x02 +#define IMX95_PAD_GPIO_IO22__CAN5_TX 0x0068 0x026C 0x0000 0x03 0x00 +#define IMX95_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x026C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x026C 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x026C 0x0514 0x16 0x01 +#define IMX95_PAD_GPIO_IO22__FLEXIO1_FLEXIO_BIT22 0x0068 0x026C 0x04C0 0x07 0x00 + +#define IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23 0x006C 0x0270 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x0270 0x05CC 0x01 0x00 +#define IMX95_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x0270 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO23__CAN5_RX 0x006C 0x0270 0x0450 0x03 0x00 +#define IMX95_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x0270 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x0270 0x0510 0x16 0x01 +#define IMX95_PAD_GPIO_IO23__FLEXIO1_FLEXIO_BIT23 0x006C 0x0270 0x04C4 0x07 0x00 + +#define IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24 0x0070 0x0274 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0274 0x05D0 0x01 0x00 +#define IMX95_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0274 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0274 0x0000 0x05 0x00 +#define IMX95_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0274 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO24__FLEXIO1_FLEXIO_BIT24 0x0070 0x0274 0x04C8 0x07 0x00 + +#define IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25 0x0074 0x0278 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0278 0x05D4 0x01 0x00 +#define IMX95_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0278 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0278 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0278 0x060C 0x05 0x01 +#define IMX95_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0278 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO25__FLEXIO1_FLEXIO_BIT25 0x0074 0x0278 0x04CC 0x07 0x00 + +#define IMX95_PAD_GPIO_IO26__GPIO2_IO_BIT26 0x0078 0x027C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x027C 0x05D8 0x01 0x00 +#define IMX95_PAD_GPIO_IO26__AONMIX_TOP_PDM_BIT_STREAM_BIT1 0x0078 0x027C 0x0410 0x02 0x02 +#define IMX95_PAD_GPIO_IO26__FLEXIO1_FLEXIO_BIT26 0x0078 0x027C 0x0458 0x03 0x01 +#define IMX95_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x027C 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x027C 0x0610 0x05 0x01 +#define IMX95_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x027C 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x027C 0x0000 0x07 0x00 + +#define IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27 0x007C 0x0280 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x0280 0x05DC 0x01 0x00 +#define IMX95_PAD_GPIO_IO27__CAN2_RX 0x007C 0x0280 0x0444 0x02 0x02 +#define IMX95_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x0280 0x0000 0x04 0x00 +#define IMX95_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x0280 0x0614 0x05 0x01 +#define IMX95_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x0280 0x0000 0x06 0x00 +#define IMX95_PAD_GPIO_IO27__FLEXIO1_FLEXIO_BIT27 0x007C 0x0280 0x045C 0x07 0x01 + +#define IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x0080 0x0284 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0284 0x0504 0x11 0x01 +#define IMX95_PAD_GPIO_IO28__CAN3_TX 0x0080 0x0284 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO28__FLEXIO1_FLEXIO_BIT28 0x0080 0x0284 0x0000 0x07 0x00 + +#define IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x0084 0x0288 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0288 0x0500 0x11 0x01 +#define IMX95_PAD_GPIO_IO29__CAN3_RX 0x0084 0x0288 0x0448 0x02 0x01 +#define IMX95_PAD_GPIO_IO29__FLEXIO1_FLEXIO_BIT29 0x0084 0x0288 0x0000 0x07 0x00 + +#define IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30 0x0088 0x028C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x0088 0x028C 0x050C 0x11 0x01 +#define IMX95_PAD_GPIO_IO30__CAN5_TX 0x0088 0x028C 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO30__FLEXIO1_FLEXIO_BIT30 0x0088 0x028C 0x0460 0x07 0x01 + +#define IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31 0x008C 0x0290 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x008C 0x0290 0x0508 0x11 0x01 +#define IMX95_PAD_GPIO_IO31__CAN5_RX 0x008C 0x0290 0x0450 0x02 0x01 +#define IMX95_PAD_GPIO_IO31__FLEXIO1_FLEXIO_BIT31 0x008C 0x0290 0x0464 0x07 0x01 + +#define IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12 0x0090 0x0294 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x0090 0x0294 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO32__LPUART6_TX 0x0090 0x0294 0x0580 0x02 0x00 +#define IMX95_PAD_GPIO_IO32__LPSPI4_PCS2 0x0090 0x0294 0x0538 0x04 0x00 + +#define IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x0094 0x0298 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO33__LPUART6_RX 0x0094 0x0298 0x057C 0x02 0x00 +#define IMX95_PAD_GPIO_IO33__LPSPI4_PCS1 0x0094 0x0298 0x0534 0x04 0x00 + +#define IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x0098 0x029C 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO34__LPUART6_CTS_B 0x0098 0x029C 0x0578 0x02 0x00 +#define IMX95_PAD_GPIO_IO34__LPSPI4_PCS0 0x0098 0x029C 0x0530 0x04 0x00 + +#define IMX95_PAD_GPIO_IO35__GPIO5_IO_BIT15 0x009C 0x02A0 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x009C 0x02A0 0x0000 0x01 0x00 +#define IMX95_PAD_GPIO_IO35__LPUART6_RTS_B 0x009C 0x02A0 0x0000 0x02 0x00 +#define IMX95_PAD_GPIO_IO35__LPSPI4_SIN 0x009C 0x02A0 0x0540 0x04 0x00 + +#define IMX95_PAD_GPIO_IO36__LPSPI4_SOUT 0x00A0 0x02A4 0x0544 0x04 0x00 +#define IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x00A0 0x02A4 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO36__LPUART7_TX 0x00A0 0x02A4 0x0588 0x02 0x00 + +#define IMX95_PAD_GPIO_IO37__GPIO5_IO_BIT17 0x00A4 0x02A8 0x0000 0x00 0x00 +#define IMX95_PAD_GPIO_IO37__LPUART7_RX 0x00A4 0x02A8 0x0584 0x02 0x00 +#define IMX95_PAD_GPIO_IO37__LPSPI4_SCK 0x00A4 0x02A8 0x053C 0x04 0x00 + +#define IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1 0x00A8 0x02AC 0x0000 0x00 0x00 +#define IMX95_PAD_CCM_CLKO1__NETCMIX_TOP_NETC_TMR_1588_TRIG1 0x00A8 0x02AC 0x0434 0x01 0x00 +#define IMX95_PAD_CCM_CLKO1__FLEXIO1_FLEXIO_BIT26 0x00A8 0x02AC 0x0458 0x04 0x00 +#define IMX95_PAD_CCM_CLKO1__GPIO3_IO_BIT26 0x00A8 0x02AC 0x0000 0x05 0x00 + +#define IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27 0x00AC 0x02B0 0x0000 0x05 0x00 +#define IMX95_PAD_CCM_CLKO2__CCMSRCGPCMIX_TOP_CLKO_2 0x00AC 0x02B0 0x0000 0x00 0x00 +#define IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1 0x00AC 0x02B0 0x0000 0x01 0x00 +#define IMX95_PAD_CCM_CLKO2__FLEXIO1_FLEXIO_BIT27 0x00AC 0x02B0 0x045C 0x04 0x00 + +#define IMX95_PAD_CCM_CLKO3__CCMSRCGPCMIX_TOP_CLKO_3 0x00B0 0x02B4 0x0000 0x00 0x00 +#define IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2 0x00B0 0x02B4 0x0438 0x01 0x00 +#define IMX95_PAD_CCM_CLKO3__CAN3_TX 0x00B0 0x02B4 0x0000 0x02 0x00 +#define IMX95_PAD_CCM_CLKO3__FLEXIO2_FLEXIO_BIT28 0x00B0 0x02B4 0x0000 0x04 0x00 +#define IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28 0x00B0 0x02B4 0x0000 0x05 0x00 + +#define IMX95_PAD_CCM_CLKO4__CCMSRCGPCMIX_TOP_CLKO_4 0x00B4 0x02B8 0x0000 0x00 0x00 +#define IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x00B4 0x02B8 0x0000 0x01 0x00 +#define IMX95_PAD_CCM_CLKO4__CAN3_RX 0x00B4 0x02B8 0x0448 0x02 0x00 +#define IMX95_PAD_CCM_CLKO4__FLEXIO2_FLEXIO_BIT29 0x00B4 0x02B8 0x0000 0x04 0x00 +#define IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29 0x00B4 0x02B8 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x00B8 0x02BC 0x0424 0x00 0x00 +#define IMX95_PAD_ENET1_MDC__LPUART3_DCD_B 0x00B8 0x02BC 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_MDC__I3C2_SCL 0x00B8 0x02BC 0x04F8 0x02 0x00 +#define IMX95_PAD_ENET1_MDC__HSIOMIX_TOP_USB1_OTG_ID 0x00B8 0x02BC 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_MDC__FLEXIO2_FLEXIO_BIT0 0x00B8 0x02BC 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0 0x00B8 0x02BC 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x00BC 0x02C0 0x0428 0x00 0x00 +#define IMX95_PAD_ENET1_MDIO__LPUART3_RIN_B 0x00BC 0x02C0 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_MDIO__I3C2_SDA 0x00BC 0x02C0 0x04FC 0x02 0x00 +#define IMX95_PAD_ENET1_MDIO__HSIOMIX_TOP_USB1_OTG_PWR 0x00BC 0x02C0 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_MDIO__FLEXIO2_FLEXIO_BIT1 0x00BC 0x02C0 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_MDIO__GPIO4_IO_BIT1 0x00BC 0x02C0 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x00C0 0x02C4 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TD3__CAN2_TX 0x00C0 0x02C4 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_TD3__HSIOMIX_TOP_USB2_OTG_ID 0x00C0 0x02C4 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_TD3__FLEXIO2_FLEXIO_BIT2 0x00C0 0x02C4 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TD3__GPIO4_IO_BIT2 0x00C0 0x02C4 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x00C4 0x02C8 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RMII_REF50_CLK 0x00C4 0x02C8 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_TD2__CAN2_RX 0x00C4 0x02C8 0x0444 0x02 0x01 +#define IMX95_PAD_ENET1_TD2__HSIOMIX_TOP_USB2_OTG_OC 0x00C4 0x02C8 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_TD2__FLEXIO2_FLEXIO_BIT3 0x00C4 0x02C8 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TD2__GPIO4_IO_BIT3 0x00C4 0x02C8 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x00C8 0x02CC 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TD1__LPUART3_RTS_B 0x00C8 0x02CC 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_TD1__I3C2_PUR 0x00C8 0x02CC 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_TD1__HSIOMIX_TOP_USB1_OTG_OC 0x00C8 0x02CC 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_TD1__FLEXIO2_FLEXIO_BIT4 0x00C8 0x02CC 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TD1__GPIO4_IO_BIT4 0x00C8 0x02CC 0x0000 0x05 0x00 +#define IMX95_PAD_ENET1_TD1__I3C2_PUR_B 0x00C8 0x02CC 0x0000 0x06 0x00 +#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RMII_TXD1 0x00C8 0x02CC 0x0000 0x07 0x00 + +#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x00CC 0x02D0 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TD0__LPUART3_TX 0x00CC 0x02D0 0x055C 0x01 0x00 +#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RMII_TXD0 0x00CC 0x02D0 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_TD0__FLEXIO2_FLEXIO_BIT5 0x00CC 0x02D0 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TD0__GPIO4_IO_BIT5 0x00CC 0x02D0 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x00D0 0x02D4 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00D0 0x02D4 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RMII_TX_EN 0x00D0 0x02D4 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO_BIT6 0x00D0 0x02D4 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TX_CTL__GPIO4_IO_BIT6 0x00D0 0x02D4 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x00D4 0x02D8 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT 0x00D4 0x02D8 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_TXC__FLEXIO2_FLEXIO_BIT7 0x00D4 0x02D8 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_TXC__GPIO4_IO_BIT7 0x00D4 0x02D8 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x00D8 0x02DC 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00D8 0x02DC 0x0000 0x01 0x00 +#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RMII_CRS_DV 0x00D8 0x02DC 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_RX_CTL__HSIOMIX_TOP_USB2_OTG_PWR 0x00D8 0x02DC 0x0000 0x03 0x00 +#define IMX95_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO_BIT8 0x00D8 0x02DC 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RX_CTL__GPIO4_IO_BIT8 0x00D8 0x02DC 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x00DC 0x02E0 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RMII_RX_ER 0x00DC 0x02E0 0x042C 0x01 0x00 +#define IMX95_PAD_ENET1_RXC__FLEXIO2_FLEXIO_BIT9 0x00DC 0x02E0 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RXC__GPIO4_IO_BIT9 0x00DC 0x02E0 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x00E0 0x02E4 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RD0__LPUART3_RX 0x00E0 0x02E4 0x0558 0x01 0x00 +#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RMII_RXD0 0x00E0 0x02E4 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_RD0__FLEXIO2_FLEXIO_BIT10 0x00E0 0x02E4 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RD0__GPIO4_IO_BIT10 0x00E0 0x02E4 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x00E4 0x02E8 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RD1__LPUART3_CTS_B 0x00E4 0x02E8 0x0554 0x01 0x00 +#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RMII_RXD1 0x00E4 0x02E8 0x0000 0x02 0x00 +#define IMX95_PAD_ENET1_RD1__LPTMR2_ALT1 0x00E4 0x02E8 0x0548 0x03 0x00 +#define IMX95_PAD_ENET1_RD1__FLEXIO2_FLEXIO_BIT11 0x00E4 0x02E8 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RD1__GPIO4_IO_BIT11 0x00E4 0x02E8 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x00E8 0x02EC 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RMII_RX_ER 0x00E8 0x02EC 0x042C 0x02 0x01 +#define IMX95_PAD_ENET1_RD2__LPTMR2_ALT2 0x00E8 0x02EC 0x054C 0x03 0x00 +#define IMX95_PAD_ENET1_RD2__FLEXIO2_FLEXIO_BIT12 0x00E8 0x02EC 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RD2__GPIO4_IO_BIT12 0x00E8 0x02EC 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x00EC 0x02F0 0x0000 0x00 0x00 +#define IMX95_PAD_ENET1_RD3__LPTMR2_ALT3 0x00EC 0x02F0 0x0550 0x03 0x00 +#define IMX95_PAD_ENET1_RD3__FLEXIO2_FLEXIO_BIT13 0x00EC 0x02F0 0x0000 0x04 0x00 +#define IMX95_PAD_ENET1_RD3__GPIO4_IO_BIT13 0x00EC 0x02F0 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x00F0 0x02F4 0x0424 0x00 0x01 +#define IMX95_PAD_ENET2_MDC__LPUART4_DCD_B 0x00F0 0x02F4 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x00F0 0x02F4 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_MDC__FLEXIO2_FLEXIO_BIT14 0x00F0 0x02F4 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14 0x00F0 0x02F4 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x00F4 0x02F8 0x0428 0x00 0x01 +#define IMX95_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00F4 0x02F8 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x00F4 0x02F8 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_MDIO__FLEXIO2_FLEXIO_BIT15 0x00F4 0x02F8 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15 0x00F4 0x02F8 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x00F8 0x02FC 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TD3__FLEXIO2_FLEXIO_BIT16 0x00F8 0x02FC 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TD3__GPIO4_IO_BIT16 0x00F8 0x02FC 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x00F8 0x02FC 0x0000 0x00 0x00 + +#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x00FC 0x0300 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RMII_REF50_CLK 0x00FC 0x0300 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x00FC 0x0300 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TD2__SAI4_TX_SYNC 0x00FC 0x0300 0x05A4 0x03 0x00 +#define IMX95_PAD_ENET2_TD2__FLEXIO2_FLEXIO_BIT17 0x00FC 0x0300 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TD2__GPIO4_IO_BIT17 0x00FC 0x0300 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x0100 0x0304 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_TD1__LPUART4_RTS_B 0x0100 0x0304 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_SAI2_RX_DATA_BIT2 0x0100 0x0304 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TD1__SAI4_TX_BCLK 0x0100 0x0304 0x05A0 0x03 0x00 +#define IMX95_PAD_ENET2_TD1__FLEXIO2_FLEXIO_BIT18 0x0100 0x0304 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TD1__GPIO4_IO_BIT18 0x0100 0x0304 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RMII_TXD1 0x0100 0x0304 0x0000 0x06 0x00 + +#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x0104 0x0308 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_TD0__LPUART4_TX 0x0104 0x0308 0x0568 0x01 0x00 +#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_SAI2_RX_DATA_BIT3 0x0104 0x0308 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TD0__SAI4_TX_DATA_BIT0 0x0104 0x0308 0x0000 0x03 0x00 +#define IMX95_PAD_ENET2_TD0__FLEXIO2_FLEXIO_BIT19 0x0104 0x0308 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TD0__GPIO4_IO_BIT19 0x0104 0x0308 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RMII_TXD0 0x0104 0x0308 0x0000 0x06 0x00 + +#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x0108 0x030C 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x0108 0x030C 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x0108 0x030C 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RMII_TX_EN 0x0108 0x030C 0x0000 0x03 0x00 +#define IMX95_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO_BIT20 0x0108 0x030C 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TX_CTL__GPIO4_IO_BIT20 0x0108 0x030C 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x010C 0x0310 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT 0x010C 0x0310 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x010C 0x0310 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_TXC__FLEXIO2_FLEXIO_BIT21 0x010C 0x0310 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_TXC__GPIO4_IO_BIT21 0x010C 0x0310 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x0110 0x0314 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x0110 0x0314 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x0110 0x0314 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO_BIT22 0x0110 0x0314 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RX_CTL__GPIO4_IO_BIT22 0x0110 0x0314 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RMII_CRS_DV 0x0110 0x0314 0x0000 0x06 0x00 + +#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x0114 0x0318 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RMII_RX_ER 0x0114 0x0318 0x0430 0x01 0x00 +#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x0114 0x0318 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_RXC__SAI4_RX_SYNC 0x0114 0x0318 0x059C 0x03 0x00 +#define IMX95_PAD_ENET2_RXC__FLEXIO2_FLEXIO_BIT23 0x0114 0x0318 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RXC__GPIO4_IO_BIT23 0x0114 0x0318 0x0000 0x05 0x00 + +#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x0118 0x031C 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RD0__LPUART4_RX 0x0118 0x031C 0x0564 0x01 0x00 +#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x0118 0x031C 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_RD0__SAI4_RX_BCLK 0x0118 0x031C 0x0594 0x03 0x00 +#define IMX95_PAD_ENET2_RD0__FLEXIO2_FLEXIO_BIT24 0x0118 0x031C 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RD0__GPIO4_IO_BIT24 0x0118 0x031C 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RMII_RXD0 0x0118 0x031C 0x0000 0x06 0x00 + +#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x011C 0x0320 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RD1__SPDIF_IN 0x011C 0x0320 0x0454 0x01 0x00 +#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x011C 0x0320 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_RD1__SAI4_RX_DATA_BIT0 0x011C 0x0320 0x0598 0x03 0x00 +#define IMX95_PAD_ENET2_RD1__FLEXIO2_FLEXIO_BIT25 0x011C 0x0320 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RD1__GPIO4_IO_BIT25 0x011C 0x0320 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RMII_RXD1 0x011C 0x0320 0x0000 0x06 0x00 + +#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x0120 0x0324 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RD2__LPUART4_CTS_B 0x0120 0x0324 0x0560 0x01 0x00 +#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x0120 0x0324 0x0000 0x02 0x00 +#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_MQS2_RIGHT 0x0120 0x0324 0x0000 0x03 0x00 +#define IMX95_PAD_ENET2_RD2__FLEXIO2_FLEXIO_BIT26 0x0120 0x0324 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RD2__GPIO4_IO_BIT26 0x0120 0x0324 0x0000 0x05 0x00 +#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RMII_RX_ER 0x0120 0x0324 0x0430 0x06 0x01 + +#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x0124 0x0328 0x0000 0x00 0x00 +#define IMX95_PAD_ENET2_RD3__SPDIF_OUT 0x0124 0x0328 0x0000 0x01 0x00 +#define IMX95_PAD_ENET2_RD3__SPDIF_IN 0x0124 0x0328 0x0454 0x02 0x01 +#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_MQS2_LEFT 0x0124 0x0328 0x0000 0x03 0x00 +#define IMX95_PAD_ENET2_RD3__FLEXIO2_FLEXIO_BIT27 0x0124 0x0328 0x0000 0x04 0x00 +#define IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27 0x0124 0x0328 0x0000 0x05 0x00 + +#define IMX95_PAD_SD1_CLK__FLEXIO1_FLEXIO_BIT8 0x0128 0x032C 0x0488 0x04 0x01 +#define IMX95_PAD_SD1_CLK__GPIO3_IO_BIT8 0x0128 0x032C 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_CLK__USDHC1_CLK 0x0128 0x032C 0x0000 0x00 0x00 + +#define IMX95_PAD_SD1_CMD__USDHC1_CMD 0x012C 0x0330 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_CMD__FLEXIO1_FLEXIO_BIT9 0x012C 0x0330 0x048C 0x04 0x01 +#define IMX95_PAD_SD1_CMD__GPIO3_IO_BIT9 0x012C 0x0330 0x0000 0x05 0x00 + +#define IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x0130 0x0334 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA0__FLEXIO1_FLEXIO_BIT10 0x0130 0x0334 0x0490 0x04 0x01 +#define IMX95_PAD_SD1_DATA0__GPIO3_IO_BIT10 0x0130 0x0334 0x0000 0x05 0x00 + +#define IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x0134 0x0338 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA1__FLEXIO1_FLEXIO_BIT11 0x0134 0x0338 0x0494 0x04 0x01 +#define IMX95_PAD_SD1_DATA1__GPIO3_IO_BIT11 0x0134 0x0338 0x0000 0x05 0x00 + +#define IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x0138 0x033C 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA2__FLEXIO1_FLEXIO_BIT12 0x0138 0x033C 0x0498 0x04 0x01 +#define IMX95_PAD_SD1_DATA2__GPIO3_IO_BIT12 0x0138 0x033C 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_DATA2__CCMSRCGPCMIX_TOP_PMIC_READY 0x0138 0x033C 0x0000 0x06 0x00 + +#define IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x013C 0x0340 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x013C 0x0340 0x0000 0x01 0x00 +#define IMX95_PAD_SD1_DATA3__FLEXIO1_FLEXIO_BIT13 0x013C 0x0340 0x049C 0x04 0x01 +#define IMX95_PAD_SD1_DATA3__GPIO3_IO_BIT13 0x013C 0x0340 0x0000 0x05 0x00 + +#define IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x0140 0x0344 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA4__FLEXSPI1_A_DATA_BIT4 0x0140 0x0344 0x04E4 0x01 0x00 +#define IMX95_PAD_SD1_DATA4__FLEXIO1_FLEXIO_BIT14 0x0140 0x0344 0x04A0 0x04 0x01 +#define IMX95_PAD_SD1_DATA4__GPIO3_IO_BIT14 0x0140 0x0344 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_DATA4__XSPI_DATA_BIT4 0x0140 0x0344 0x05FC 0x06 0x00 + +#define IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x0144 0x0348 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA5__FLEXSPI1_A_DATA_BIT5 0x0144 0x0348 0x04E8 0x01 0x00 +#define IMX95_PAD_SD1_DATA5__USDHC1_RESET_B 0x0144 0x0348 0x0000 0x02 0x00 +#define IMX95_PAD_SD1_DATA5__FLEXIO1_FLEXIO_BIT15 0x0144 0x0348 0x04A4 0x04 0x01 +#define IMX95_PAD_SD1_DATA5__GPIO3_IO_BIT15 0x0144 0x0348 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_DATA5__XSPI_DATA_BIT5 0x0144 0x0348 0x0600 0x06 0x00 + +#define IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x0148 0x034C 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA6__FLEXSPI1_A_DATA_BIT6 0x0148 0x034C 0x04EC 0x01 0x00 +#define IMX95_PAD_SD1_DATA6__USDHC1_CD_B 0x0148 0x034C 0x0000 0x02 0x00 +#define IMX95_PAD_SD1_DATA6__FLEXIO1_FLEXIO_BIT16 0x0148 0x034C 0x04A8 0x04 0x01 +#define IMX95_PAD_SD1_DATA6__GPIO3_IO_BIT16 0x0148 0x034C 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_DATA6__XSPI_DATA_BIT6 0x0148 0x034C 0x0604 0x06 0x00 + +#define IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x014C 0x0350 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_DATA7__FLEXSPI1_A_DATA_BIT7 0x014C 0x0350 0x04F0 0x01 0x00 +#define IMX95_PAD_SD1_DATA7__USDHC1_WP 0x014C 0x0350 0x0000 0x02 0x00 +#define IMX95_PAD_SD1_DATA7__FLEXIO1_FLEXIO_BIT17 0x014C 0x0350 0x04AC 0x04 0x01 +#define IMX95_PAD_SD1_DATA7__GPIO3_IO_BIT17 0x014C 0x0350 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_DATA7__XSPI_DATA_BIT7 0x014C 0x0350 0x0608 0x06 0x00 + +#define IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x0150 0x0354 0x0000 0x00 0x00 +#define IMX95_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0150 0x0354 0x04D0 0x01 0x00 +#define IMX95_PAD_SD1_STROBE__FLEXIO1_FLEXIO_BIT18 0x0150 0x0354 0x04B0 0x04 0x01 +#define IMX95_PAD_SD1_STROBE__GPIO3_IO_BIT18 0x0150 0x0354 0x0000 0x05 0x00 +#define IMX95_PAD_SD1_STROBE__XSPI_DQS 0x0150 0x0354 0x05E4 0x06 0x00 + +#define IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0154 0x0358 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_VSELECT__USDHC2_WP 0x0154 0x0358 0x0000 0x01 0x00 +#define IMX95_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0154 0x0358 0x0550 0x02 0x01 +#define IMX95_PAD_SD2_VSELECT__FLEXIO1_FLEXIO_BIT19 0x0154 0x0358 0x04B4 0x04 0x01 +#define IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19 0x0154 0x0358 0x0000 0x05 0x00 +#define IMX95_PAD_SD2_VSELECT__CCMSRCGPCMIX_TOP_EXT_CLK1 0x0154 0x0358 0x0420 0x06 0x01 + +#define IMX95_PAD_SD3_CLK__USDHC3_CLK 0x0158 0x035C 0x05C8 0x00 0x01 +#define IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0158 0x035C 0x04F4 0x01 0x00 +#define IMX95_PAD_SD3_CLK__SAI5_TX_DATA_BIT1 0x0158 0x035C 0x0000 0x02 0x00 +#define IMX95_PAD_SD3_CLK__SAI5_RX_DATA_BIT0 0x0158 0x035C 0x05AC 0x03 0x00 +#define IMX95_PAD_SD3_CLK__FLEXIO1_FLEXIO_BIT20 0x0158 0x035C 0x04B8 0x04 0x01 +#define IMX95_PAD_SD3_CLK__GPIO3_IO_BIT20 0x0158 0x035C 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_CLK__XSPI_CLK 0x0158 0x035C 0x05E8 0x06 0x00 + +#define IMX95_PAD_SD3_CMD__USDHC3_CMD 0x015C 0x0360 0x05CC 0x00 0x01 +#define IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x015C 0x0360 0x0000 0x01 0x00 +#define IMX95_PAD_SD3_CMD__SAI5_TX_DATA_BIT2 0x015C 0x0360 0x0000 0x02 0x00 +#define IMX95_PAD_SD3_CMD__SAI5_RX_SYNC 0x015C 0x0360 0x05BC 0x03 0x00 +#define IMX95_PAD_SD3_CMD__FLEXIO1_FLEXIO_BIT21 0x015C 0x0360 0x04BC 0x04 0x01 +#define IMX95_PAD_SD3_CMD__GPIO3_IO_BIT21 0x015C 0x0360 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_CMD__XSPI_CS 0x015C 0x0360 0x05E0 0x06 0x00 + +#define IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x0160 0x0364 0x05D0 0x00 0x01 +#define IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0 0x0160 0x0364 0x04D4 0x01 0x00 +#define IMX95_PAD_SD3_DATA0__SAI5_TX_DATA_BIT3 0x0160 0x0364 0x0000 0x02 0x00 +#define IMX95_PAD_SD3_DATA0__SAI5_RX_BCLK 0x0160 0x0364 0x05A8 0x03 0x00 +#define IMX95_PAD_SD3_DATA0__FLEXIO1_FLEXIO_BIT22 0x0160 0x0364 0x04C0 0x04 0x01 +#define IMX95_PAD_SD3_DATA0__GPIO3_IO_BIT22 0x0160 0x0364 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_DATA0__XSPI_DATA_BIT0 0x0160 0x0364 0x05EC 0x06 0x00 + +#define IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x0164 0x0368 0x05D4 0x00 0x01 +#define IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1 0x0164 0x0368 0x04D8 0x01 0x00 +#define IMX95_PAD_SD3_DATA1__SAI5_RX_DATA_BIT1 0x0164 0x0368 0x05B0 0x02 0x00 +#define IMX95_PAD_SD3_DATA1__SAI5_TX_DATA_BIT0 0x0164 0x0368 0x0000 0x03 0x00 +#define IMX95_PAD_SD3_DATA1__FLEXIO1_FLEXIO_BIT23 0x0164 0x0368 0x04C4 0x04 0x01 +#define IMX95_PAD_SD3_DATA1__GPIO3_IO_BIT23 0x0164 0x0368 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_DATA1__XSPI_DATA_BIT1 0x0164 0x0368 0x05F0 0x06 0x00 + +#define IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x0168 0x036C 0x05D8 0x00 0x01 +#define IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2 0x0168 0x036C 0x04DC 0x01 0x00 +#define IMX95_PAD_SD3_DATA2__SAI5_RX_DATA_BIT2 0x0168 0x036C 0x05B4 0x02 0x00 +#define IMX95_PAD_SD3_DATA2__SAI5_TX_SYNC 0x0168 0x036C 0x05C4 0x03 0x00 +#define IMX95_PAD_SD3_DATA2__FLEXIO1_FLEXIO_BIT24 0x0168 0x036C 0x04C8 0x04 0x01 +#define IMX95_PAD_SD3_DATA2__GPIO3_IO_BIT24 0x0168 0x036C 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_DATA2__XSPI_DATA_BIT2 0x0168 0x036C 0x05F4 0x06 0x00 + +#define IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x016C 0x0370 0x05DC 0x00 0x01 +#define IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3 0x016C 0x0370 0x04E0 0x01 0x00 +#define IMX95_PAD_SD3_DATA3__SAI5_RX_DATA_BIT3 0x016C 0x0370 0x05B8 0x02 0x00 +#define IMX95_PAD_SD3_DATA3__SAI5_TX_BCLK 0x016C 0x0370 0x05C0 0x03 0x00 +#define IMX95_PAD_SD3_DATA3__FLEXIO1_FLEXIO_BIT25 0x016C 0x0370 0x04CC 0x04 0x01 +#define IMX95_PAD_SD3_DATA3__GPIO3_IO_BIT25 0x016C 0x0370 0x0000 0x05 0x00 +#define IMX95_PAD_SD3_DATA3__XSPI_DATA_BIT3 0x016C 0x0370 0x05F8 0x06 0x00 + +#define IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x0170 0x0374 0x04D4 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA0__NETCMIX_TOP_SAI2_TX_DATA_BIT4 0x0170 0x0374 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_DATA0__SAI4_TX_BCLK 0x0170 0x0374 0x05A0 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA0__SAI4_RX_DATA_BIT1 0x0170 0x0374 0x0000 0x03 0x00 +#define IMX95_PAD_XSPI1_DATA0__XSPI_DATA_BIT0 0x0170 0x0374 0x05EC 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0 0x0170 0x0374 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x0174 0x0378 0x04D8 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA1__NETCMIX_TOP_SAI2_TX_DATA_BIT5 0x0174 0x0378 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_SYNC 0x0174 0x0378 0x05A4 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_DATA_BIT1 0x0174 0x0378 0x0000 0x03 0x00 +#define IMX95_PAD_XSPI1_DATA1__XSPI_DATA_BIT1 0x0174 0x0378 0x05F0 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1 0x0174 0x0378 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x0178 0x037C 0x04DC 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA2__NETCMIX_TOP_SAI2_TX_DATA_BIT6 0x0178 0x037C 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_DATA2__SAI4_TX_DATA_BIT0 0x0178 0x037C 0x0000 0x02 0x00 +#define IMX95_PAD_XSPI1_DATA2__XSPI_DATA_BIT2 0x0178 0x037C 0x05F4 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2 0x0178 0x037C 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x017C 0x0380 0x04E0 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA3__NETCMIX_TOP_SAI2_TX_DATA_BIT7 0x017C 0x0380 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_DATA3__SAI4_RX_DATA_BIT0 0x017C 0x0380 0x0598 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA3__XSPI_DATA_BIT3 0x017C 0x0380 0x05F8 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3 0x017C 0x0380 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x0180 0x0384 0x04E4 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x0180 0x0384 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_DATA4__SAI5_RX_DATA_BIT1 0x0180 0x0384 0x05B0 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA4__XSPI_DATA_BIT4 0x0180 0x0384 0x05FC 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4 0x0180 0x0384 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x0184 0x0388 0x04E8 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x0184 0x0388 0x05C4 0x01 0x01 +#define IMX95_PAD_XSPI1_DATA5__SAI5_RX_DATA_BIT2 0x0184 0x0388 0x05B4 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA5__NETCMIX_TOP_SAI2_RX_DATA_BIT6 0x0184 0x0388 0x043C 0x03 0x00 +#define IMX95_PAD_XSPI1_DATA5__XSPI_DATA_BIT5 0x0184 0x0388 0x0600 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA5__GPIO5_IO_BIT5 0x0184 0x0388 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x0188 0x038C 0x04EC 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x0188 0x038C 0x05C0 0x01 0x01 +#define IMX95_PAD_XSPI1_DATA6__SAI5_RX_DATA_BIT3 0x0188 0x038C 0x05B8 0x02 0x01 +#define IMX95_PAD_XSPI1_DATA6__NETCMIX_TOP_SAI2_RX_DATA_BIT7 0x0188 0x038C 0x0440 0x03 0x00 +#define IMX95_PAD_XSPI1_DATA6__XSPI_DATA_BIT6 0x0188 0x038C 0x0604 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6 0x0188 0x038C 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x018C 0x0390 0x04F0 0x00 0x01 +#define IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x018C 0x0390 0x05AC 0x01 0x01 +#define IMX95_PAD_XSPI1_DATA7__SAI5_TX_DATA_BIT1 0x018C 0x0390 0x0000 0x02 0x00 +#define IMX95_PAD_XSPI1_DATA7__XSPI_DATA_BIT7 0x018C 0x0390 0x0608 0x04 0x01 +#define IMX95_PAD_XSPI1_DATA7__GPIO5_IO_BIT7 0x018C 0x0390 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x0190 0x0394 0x04D0 0x00 0x01 +#define IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC 0x0190 0x0394 0x05BC 0x01 0x01 +#define IMX95_PAD_XSPI1_DQS__SAI5_TX_DATA_BIT2 0x0190 0x0394 0x0000 0x02 0x00 +#define IMX95_PAD_XSPI1_DQS__NETCMIX_TOP_SAI2_RX_DATA_BIT6 0x0190 0x0394 0x043C 0x03 0x01 +#define IMX95_PAD_XSPI1_DQS__XSPI_DQS 0x0190 0x0394 0x05E4 0x04 0x01 +#define IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8 0x0190 0x0394 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x0194 0x0398 0x04F4 0x00 0x01 +#define IMX95_PAD_XSPI1_SCLK__NETCMIX_TOP_SAI2_RX_DATA_BIT4 0x0194 0x0398 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_SCLK__SAI4_RX_SYNC 0x0194 0x0398 0x059C 0x02 0x01 +#define IMX95_PAD_XSPI1_SCLK__EARC_DC_HPD_IN 0x0194 0x0398 0x0000 0x03 0x00 +#define IMX95_PAD_XSPI1_SCLK__XSPI_CLK 0x0194 0x0398 0x05E8 0x04 0x01 +#define IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9 0x0194 0x0398 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x0198 0x039C 0x0000 0x00 0x00 +#define IMX95_PAD_XSPI1_SS0_B__NETCMIX_TOP_SAI2_RX_DATA_BIT5 0x0198 0x039C 0x0000 0x01 0x00 +#define IMX95_PAD_XSPI1_SS0_B__SAI4_RX_BCLK 0x0198 0x039C 0x0594 0x02 0x01 +#define IMX95_PAD_XSPI1_SS0_B__EARC_CEC_OUT 0x0198 0x039C 0x0000 0x03 0x00 +#define IMX95_PAD_XSPI1_SS0_B__XSPI_CS 0x0198 0x039C 0x05E0 0x04 0x01 +#define IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10 0x0198 0x039C 0x0000 0x05 0x00 + +#define IMX95_PAD_XSPI1_SS1_B__FLEXSPI1_A_SS1_B 0x019C 0x03A0 0x0000 0x00 0x00 +#define IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK 0x019C 0x03A0 0x05A8 0x01 0x01 +#define IMX95_PAD_XSPI1_SS1_B__SAI5_TX_DATA_BIT3 0x019C 0x03A0 0x0000 0x02 0x00 +#define IMX95_PAD_XSPI1_SS1_B__NETCMIX_TOP_SAI2_RX_DATA_BIT7 0x019C 0x03A0 0x0440 0x03 0x01 +#define IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x019C 0x03A0 0x0000 0x05 0x00 + +#define IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x01A0 0x03A4 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_CD_B__NETCMIX_TOP_NETC_TMR_1588_TRIG1 0x01A0 0x03A4 0x0434 0x01 0x01 +#define IMX95_PAD_SD2_CD_B__I3C2_SCL 0x01A0 0x03A4 0x04F8 0x02 0x01 +#define IMX95_PAD_SD2_CD_B__FLEXIO1_FLEXIO_BIT0 0x01A0 0x03A4 0x0468 0x04 0x01 +#define IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x01A0 0x03A4 0x0000 0x05 0x00 + +#define IMX95_PAD_SD2_CLK__USDHC2_CLK 0x01A4 0x03A8 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_CLK__NETCMIX_TOP_NETC_TMR_1588_PP1 0x01A4 0x03A8 0x0000 0x01 0x00 +#define IMX95_PAD_SD2_CLK__I3C2_SDA 0x01A4 0x03A8 0x04FC 0x02 0x01 +#define IMX95_PAD_SD2_CLK__FLEXIO1_FLEXIO_BIT1 0x01A4 0x03A8 0x046C 0x04 0x01 +#define IMX95_PAD_SD2_CLK__GPIO3_IO_BIT1 0x01A4 0x03A8 0x0000 0x05 0x00 +#define IMX95_PAD_SD2_CLK__CCMSRCGPCMIX_TOP_OBSERVE_0 0x01A4 0x03A8 0x0000 0x06 0x00 + +#define IMX95_PAD_SD2_CMD__USDHC2_CMD 0x01A8 0x03AC 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_CMD__NETCMIX_TOP_NETC_TMR_1588_TRIG2 0x01A8 0x03AC 0x0438 0x01 0x01 +#define IMX95_PAD_SD2_CMD__I3C2_PUR 0x01A8 0x03AC 0x0000 0x02 0x00 +#define IMX95_PAD_SD2_CMD__I3C2_PUR_B 0x01A8 0x03AC 0x0000 0x03 0x00 +#define IMX95_PAD_SD2_CMD__FLEXIO1_FLEXIO_BIT2 0x01A8 0x03AC 0x0470 0x04 0x01 +#define IMX95_PAD_SD2_CMD__GPIO3_IO_BIT2 0x01A8 0x03AC 0x0000 0x05 0x00 +#define IMX95_PAD_SD2_CMD__CCMSRCGPCMIX_TOP_OBSERVE_1 0x01A8 0x03AC 0x0000 0x06 0x00 + +#define IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x01AC 0x03B0 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_DATA0__NETCMIX_TOP_NETC_TMR_1588_PP2 0x01AC 0x03B0 0x0000 0x01 0x00 +#define IMX95_PAD_SD2_DATA0__CAN2_TX 0x01AC 0x03B0 0x0000 0x02 0x00 +#define IMX95_PAD_SD2_DATA0__FLEXIO1_FLEXIO_BIT3 0x01AC 0x03B0 0x0474 0x04 0x01 +#define IMX95_PAD_SD2_DATA0__GPIO3_IO_BIT3 0x01AC 0x03B0 0x0000 0x05 0x00 +#define IMX95_PAD_SD2_DATA0__CCMSRCGPCMIX_TOP_OBSERVE_2 0x01AC 0x03B0 0x0000 0x06 0x00 + +#define IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x01B0 0x03B4 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_DATA1__NETCMIX_TOP_NETC_TMR_1588_CLK 0x01B0 0x03B4 0x0000 0x01 0x00 +#define IMX95_PAD_SD2_DATA1__CAN2_RX 0x01B0 0x03B4 0x0444 0x02 0x03 +#define IMX95_PAD_SD2_DATA1__FLEXIO1_FLEXIO_BIT4 0x01B0 0x03B4 0x0478 0x04 0x01 +#define IMX95_PAD_SD2_DATA1__GPIO3_IO_BIT4 0x01B0 0x03B4 0x0000 0x05 0x00 + +#define IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x01B4 0x03B8 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_NETC_TMR_1588_PP3 0x01B4 0x03B8 0x0000 0x01 0x00 +#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_MQS2_RIGHT 0x01B4 0x03B8 0x0000 0x02 0x00 +#define IMX95_PAD_SD2_DATA2__FLEXIO1_FLEXIO_BIT5 0x01B4 0x03B8 0x047C 0x04 0x01 +#define IMX95_PAD_SD2_DATA2__GPIO3_IO_BIT5 0x01B4 0x03B8 0x0000 0x05 0x00 + +#define IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x01B8 0x03BC 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_DATA3__LPTMR2_ALT1 0x01B8 0x03BC 0x0548 0x01 0x01 +#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_MQS2_LEFT 0x01B8 0x03BC 0x0000 0x02 0x00 +#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_NETC_TMR_1588_ALARM1 0x01B8 0x03BC 0x0000 0x03 0x00 +#define IMX95_PAD_SD2_DATA3__FLEXIO1_FLEXIO_BIT6 0x01B8 0x03BC 0x0480 0x04 0x01 +#define IMX95_PAD_SD2_DATA3__GPIO3_IO_BIT6 0x01B8 0x03BC 0x0000 0x05 0x00 + +#define IMX95_PAD_SD2_RESET_B__USDHC2_RESET_B 0x01BC 0x03C0 0x0000 0x00 0x00 +#define IMX95_PAD_SD2_RESET_B__LPTMR2_ALT2 0x01BC 0x03C0 0x054C 0x01 0x01 +#define IMX95_PAD_SD2_RESET_B__NETCMIX_TOP_NETC_TMR_1588_GCLK 0x01BC 0x03C0 0x0000 0x03 0x00 +#define IMX95_PAD_SD2_RESET_B__FLEXIO1_FLEXIO_BIT7 0x01BC 0x03C0 0x0484 0x04 0x01 +#define IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x01BC 0x03C0 0x0000 0x05 0x00 + +#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x01C0 0x03C4 0x0000 0x00 0x00 +#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_I3C1_SCL 0x01C0 0x03C4 0x0000 0x01 0x00 +#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPUART1_DCD_B 0x01C0 0x03C4 0x0000 0x02 0x00 +#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_TPM2_CH0 0x01C0 0x03C4 0x0000 0x03 0x00 +#define IMX95_PAD_I2C1_SCL__VPUMIX_TOP_UART_RX 0x01C0 0x03C4 0x0000 0x04 0x00 +#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_GPIO1_IO_BIT0 0x01C0 0x03C4 0x0000 0x05 0x00 + +#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x01C4 0x03C8 0x0000 0x00 0x00 +#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_I3C1_SDA 0x01C4 0x03C8 0x0000 0x01 0x00 +#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPUART1_RIN_B 0x01C4 0x03C8 0x0000 0x02 0x00 +#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_TPM2_CH1 0x01C4 0x03C8 0x0000 0x03 0x00 +#define IMX95_PAD_I2C1_SDA__VPUMIX_TOP_UART_TX 0x01C4 0x03C8 0x0000 0x04 0x00 +#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_GPIO1_IO_BIT1 0x01C4 0x03C8 0x0000 0x05 0x00 + +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x01C8 0x03CC 0x0000 0x00 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR 0x01C8 0x03CC 0x0000 0x01 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPUART2_DCD_B 0x01C8 0x03CC 0x0000 0x02 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_TPM2_CH2 0x01C8 0x03CC 0x0000 0x03 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_SAI1_RX_SYNC 0x01C8 0x03CC 0x0000 0x04 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2 0x01C8 0x03CC 0x0000 0x05 0x00 +#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR_B 0x01C8 0x03CC 0x0000 0x06 0x00 + +#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x01CC 0x03D0 0x0000 0x00 0x00 +#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPUART2_RIN_B 0x01CC 0x03D0 0x0000 0x02 0x00 +#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_TPM2_CH3 0x01CC 0x03D0 0x0000 0x03 0x00 +#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_SAI1_RX_BCLK 0x01CC 0x03D0 0x0000 0x04 0x00 +#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3 0x01CC 0x03D0 0x0000 0x05 0x00 + +#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x01D0 0x03D4 0x0000 0x00 0x00 +#define IMX95_PAD_UART1_RXD__S400_UART_RX 0x01D0 0x03D4 0x0000 0x01 0x00 +#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPSPI2_SIN 0x01D0 0x03D4 0x0000 0x02 0x00 +#define IMX95_PAD_UART1_RXD__AONMIX_TOP_TPM1_CH0 0x01D0 0x03D4 0x0000 0x03 0x00 +#define IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4 0x01D0 0x03D4 0x0000 0x05 0x00 + +#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x01D4 0x03D8 0x0000 0x00 0x00 +#define IMX95_PAD_UART1_TXD__S400_UART_TX 0x01D4 0x03D8 0x0000 0x01 0x00 +#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPSPI2_PCS0 0x01D4 0x03D8 0x0000 0x02 0x00 +#define IMX95_PAD_UART1_TXD__AONMIX_TOP_TPM1_CH1 0x01D4 0x03D8 0x0000 0x03 0x00 +#define IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5 0x01D4 0x03D8 0x0000 0x05 0x00 + +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x01D8 0x03DC 0x0000 0x00 0x00 +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B 0x01D8 0x03DC 0x0000 0x01 0x00 +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPSPI2_SOUT 0x01D8 0x03DC 0x0000 0x02 0x00 +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_TPM1_CH2 0x01D8 0x03DC 0x0000 0x03 0x00 +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_SAI1_MCLK 0x01D8 0x03DC 0x041C 0x04 0x00 +#define IMX95_PAD_UART2_RXD__AONMIX_TOP_GPIO1_IO_BIT6 0x01D8 0x03DC 0x0000 0x05 0x00 + +#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x01DC 0x03E0 0x0000 0x00 0x00 +#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B 0x01DC 0x03E0 0x0000 0x01 0x00 +#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPSPI2_SCK 0x01DC 0x03E0 0x0000 0x02 0x00 +#define IMX95_PAD_UART2_TXD__AONMIX_TOP_TPM1_CH3 0x01DC 0x03E0 0x0000 0x03 0x00 +#define IMX95_PAD_UART2_TXD__AONMIX_TOP_GPIO1_IO_BIT7 0x01DC 0x03E0 0x0000 0x05 0x00 + +#define IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x01E0 0x03E4 0x0000 0x00 0x00 +#define IMX95_PAD_PDM_CLK__AONMIX_TOP_MQS1_LEFT 0x01E0 0x03E4 0x0000 0x01 0x00 +#define IMX95_PAD_PDM_CLK__AONMIX_TOP_LPTMR1_ALT1 0x01E0 0x03E4 0x0000 0x04 0x00 +#define IMX95_PAD_PDM_CLK__AONMIX_TOP_GPIO1_IO_BIT8 0x01E0 0x03E4 0x0000 0x05 0x00 +#define IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x01E0 0x03E4 0x0000 0x06 0x00 + +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x01E4 0x03E8 0x040C 0x00 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_MQS1_RIGHT 0x01E4 0x03E8 0x0000 0x01 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPSPI1_PCS1 0x01E4 0x03E8 0x0000 0x02 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_TPM1_EXTCLK 0x01E4 0x03E8 0x0000 0x03 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPTMR1_ALT2 0x01E4 0x03E8 0x0000 0x04 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9 0x01E4 0x03E8 0x0000 0x05 0x00 +#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x01E4 0x03E8 0x0408 0x06 0x00 + +#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_PDM_BIT_STREAM_BIT1 0x01E8 0x03EC 0x0410 0x00 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x01E8 0x03EC 0x0000 0x01 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPSPI2_PCS1 0x01E8 0x03EC 0x0000 0x02 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_TPM2_EXTCLK 0x01E8 0x03EC 0x0000 0x03 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPTMR1_ALT3 0x01E8 0x03EC 0x0000 0x04 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x01E8 0x03EC 0x0000 0x05 0x00 +#define IMX95_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_TOP_EXT_CLK1 0x01E8 0x03EC 0x0420 0x06 0x00 + +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x01EC 0x03F0 0x0000 0x00 0x00 +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_DATA_BIT1 0x01EC 0x03F0 0x0000 0x01 0x00 +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPSPI1_PCS0 0x01EC 0x03F0 0x0000 0x02 0x00 +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPUART2_DTR_B 0x01EC 0x03F0 0x0000 0x03 0x00 +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT 0x01EC 0x03F0 0x0000 0x04 0x00 +#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x01EC 0x03F0 0x0000 0x05 0x00 + +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x01F0 0x03F4 0x0000 0x00 0x00 +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B 0x01F0 0x03F4 0x0000 0x01 0x00 +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPSPI1_SIN 0x01F0 0x03F4 0x0000 0x02 0x00 +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART1_DSR_B 0x01F0 0x03F4 0x0000 0x03 0x00 +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX 0x01F0 0x03F4 0x0408 0x04 0x01 +#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12 0x01F0 0x03F4 0x0000 0x05 0x00 + +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x01F4 0x03F8 0x0000 0x00 0x00 +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B 0x01F4 0x03F8 0x0000 0x01 0x00 +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPSPI1_SCK 0x01F4 0x03F8 0x0000 0x02 0x00 +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART1_DTR_B 0x01F4 0x03F8 0x0000 0x03 0x00 +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX 0x01F4 0x03F8 0x0000 0x04 0x00 +#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13 0x01F4 0x03F8 0x0000 0x05 0x00 + +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x01F8 0x03FC 0x0000 0x00 0x00 +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_MCLK 0x01F8 0x03FC 0x041C 0x01 0x01 +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPSPI1_SOUT 0x01F8 0x03FC 0x0000 0x02 0x00 +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPUART2_DSR_B 0x01F8 0x03FC 0x0000 0x03 0x00 +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT 0x01F8 0x03FC 0x0000 0x04 0x00 +#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x01F8 0x03FC 0x0000 0x05 0x00 + +#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_WDOG_ANY 0x01FC 0x0400 0x0000 0x00 0x00 +#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_FCCU_EOUT1 0x01FC 0x0400 0x0000 0x01 0x00 +#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_GPIO1_IO_BIT15 0x01FC 0x0400 0x0000 0x05 0x00 +#endif /* __DTS_IMX95_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/freescale/imx95-power.h b/arch/arm64/boot/dts/freescale/imx95-power.h new file mode 100644 index 000000000000..0b7f0bc30e19 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-power.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright 2024 NXP + */ + +#ifndef __IMX95_POWER_H__ +#define __IMX95_POWER_H__ + +#define IMX95_PD_ANA 0 +#define IMX95_PD_AON 1 +#define IMX95_PD_BBSM 2 +#define IMX95_PD_CAMERA 3 +#define IMX95_PD_CCMSRCGPC 4 +#define IMX95_PD_A55C0 5 +#define IMX95_PD_A55C1 6 +#define IMX95_PD_A55C2 7 +#define IMX95_PD_A55C3 8 +#define IMX95_PD_A55C4 9 +#define IMX95_PD_A55C5 10 +#define IMX95_PD_A55P 11 +#define IMX95_PD_DDR 12 +#define IMX95_PD_DISPLAY 13 +#define IMX95_PD_GPU 14 +#define IMX95_PD_HSIO_TOP 15 +#define IMX95_PD_HSIO_WAON 16 +#define IMX95_PD_M7 17 +#define IMX95_PD_NETC 18 +#define IMX95_PD_NOC 19 +#define IMX95_PD_NPU 20 +#define IMX95_PD_VPU 21 +#define IMX95_PD_WAKEUP 22 + +#define IMX95_PERF_ELE 0 +#define IMX95_PERF_M33 1 +#define IMX95_PERF_WAKEUP 2 +#define IMX95_PERF_M7 3 +#define IMX95_PERF_DRAM 4 +#define IMX95_PERF_HSIO 5 +#define IMX95_PERF_NPU 6 +#define IMX95_PERF_NOC 7 +#define IMX95_PERF_A55 8 +#define IMX95_PERF_GPU 9 +#define IMX95_PERF_VPU 10 +#define IMX95_PERF_CAM 11 +#define IMX95_PERF_DISP 12 + +#endif diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi new file mode 100644 index 000000000000..1bbf9a0468f6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -0,0 +1,1192 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright 2024 NXP + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include "imx95-clock.h" +#include "imx95-pinfunc.h" +#include "imx95-power.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A55_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + #cooling-cells = <2>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l0>; + }; + + A55_1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l1>; + }; + + A55_2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + #cooling-cells = <2>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l2>; + }; + + A55_3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + #cooling-cells = <2>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l3>; + }; + + A55_4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + enable-method = "psci"; + #cooling-cells = <2>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l4>; + }; + + A55_5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + power-domains = <&scmi_devpd IMX95_PERF_A55>; + power-domain-names = "perf"; + enable-method = "psci"; + #cooling-cells = <2>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l5>; + }; + + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l4: l2-cache-l4 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l5: l2-cache-l5 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <3>; + cache-unified; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&A55_0>; + }; + + core1 { + cpu = <&A55_1>; + }; + + core2 { + cpu = <&A55_2>; + }; + + core3 { + cpu = <&A55_3>; + }; + + core4 { + cpu = <&A55_4>; + }; + + core5 { + cpu = <&A55_5>; + }; + }; + }; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + sai1_mclk: clock-sai-mclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <0>; + clock-output-names = "sai1_mclk"; + }; + + sai2_mclk: clock-sai-mclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <0>; + clock-output-names = "sai2_mclk"; + }; + + sai3_mclk: clock-sai-mclk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <0>; + clock-output-names = "sai3_mclk"; + }; + + sai4_mclk: clock-sai-mclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <0>; + clock-output-names = "sai4_mclk"; + }; + + sai5_mclk: clock-sai-mclk5 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <0>; + clock-output-names = "sai5_mclk"; + }; + + osc_24m: clock-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + sram1: sram@204c0000 { + compatible = "mmio-sram"; + reg = <0x0 0x204c0000 0x0 0x18000>; + ranges = <0x0 0x0 0x204c0000 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; + shmem = <&scmi_buf0>, <&scmi_buf1>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_perf: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_sensor: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; + }; + + scmi_iomuxc: protocol@19 { + reg = <0x19>; + }; + + }; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + thermal-zones { + a55-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&scmi_sensor 1>; + + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,no-tick-in-suspend; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48000000 { + compatible = "arm,gic-v3"; + reg = <0 0x48000000 0 0x10000>, + <0 0x48060000 0 0xc0000>; + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + dma-noncoherent; + ranges; + + its: msi-controller@48040000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x48040000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + dma-noncoherent; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips2: bus@42000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x0 0x42000000 0x0 0x800000>; + ranges = <0x42000000 0x0 0x42000000 0x8000000>, + <0x28000000 0x0 0x28000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + mu7: mailbox@42430000 { + compatible = "fsl,imx95-mu"; + reg = <0x42430000 0x10000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + #mbox-cells = <2>; + status = "disabled"; + }; + + wdog3: watchdog@42490000 { + compatible = "fsl,imx93-wdt"; + reg = <0x42490000 0x10000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + timeout-sec = <40>; + status = "disabled"; + }; + + tpm3: pwm@424e0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424e0000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm4: pwm@424f0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424f0000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_TPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm5: pwm@42500000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x42500000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_TPM5>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm6: pwm@42510000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x42510000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_TPM6>; + #pwm-cells = <3>; + status = "disabled"; + }; + + lpi2c3: i2c@42530000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42530000 0x10000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C3>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpi2c4: i2c@42540000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42540000 0x10000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C4>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpspi3: spi@42550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x42550000 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI3>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi4: spi@42560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x42560000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI4>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpuart3: serial@42570000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42570000 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART3>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@42580000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42580000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@42590000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42590000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart6: serial@425a0000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x425a0000 0x1000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART6>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart7: serial@42690000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x42690000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART7>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart8: serial@426a0000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x426a0000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART8>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpi2c5: i2c@426b0000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426b0000 0x10000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C5>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpi2c6: i2c@426c0000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426c0000 0x10000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C6>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpi2c7: i2c@426d0000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426d0000 0x10000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C7>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpi2c8: i2c@426e0000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426e0000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C8>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpspi5: spi@426f0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x426f0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI5>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi6: spi@42700000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x42700000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI6>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi7: spi@42710000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x42710000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI7>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi8: spi@42720000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x42720000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI8>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + mu8: mailbox@42730000 { + compatible = "fsl,imx95-mu"; + reg = <0x42730000 0x10000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + #mbox-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@42800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0 0x42800000 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x42800000 0x0 0x42800000 0x800000>; + + usdhc1: mmc@42850000 { + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42850000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_WAKEUPAXI>, + <&scmi_clk IMX95_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-start-tap = <1>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: mmc@42860000 { + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42860000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_WAKEUPAXI>, + <&scmi_clk IMX95_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; + assigned-clock-rates = <400000000>; + bus-width = <4>; + fsl,tuning-start-tap = <1>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@428b0000 { + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x428b0000 0x10000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_WAKEUPAXI>, + <&scmi_clk IMX95_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; + assigned-clock-rates = <400000000>; + bus-width = <4>; + fsl,tuning-start-tap = <1>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + }; + + gpio2: gpio@43810000 { + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; + reg = <0x0 0x43810000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "gpio", "port"; + gpio-ranges = <&scmi_iomuxc 0 4 32>; + }; + + gpio3: gpio@43820000 { + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; + reg = <0x0 0x43820000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "gpio", "port"; + gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>, + <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>; + }; + + gpio4: gpio@43840000 { + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; + reg = <0x0 0x43840000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "gpio", "port"; + gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>; + }; + + gpio5: gpio@43850000 { + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; + reg = <0x0 0x43850000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "gpio", "port"; + gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>; + }; + + aips1: bus@44000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x0 0x44000000 0x0 0x800000>; + ranges = <0x44000000 0x0 0x44000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + mu1: mailbox@44220000 { + compatible = "fsl,imx95-mu"; + reg = <0x44220000 0x10000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + #mbox-cells = <2>; + status = "disabled"; + }; + + tpm1: pwm@44310000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44310000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm2: pwm@44320000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44320000 0x1000>; + clocks = <&scmi_clk IMX95_CLK_TPM2>; + #pwm-cells = <3>; + status = "disabled"; + }; + + lpi2c1: i2c@44340000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44340000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C1>, + <&scmi_clk IMX95_CLK_BUSAON>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpi2c2: i2c@44350000 { + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44350000 0x10000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPI2C2>, + <&scmi_clk IMX95_CLK_BUSAON>; + clock-names = "per", "ipg"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI1>, + <&scmi_clk IMX95_CLK_BUSAON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPSPI2>, + <&scmi_clk IMX95_CLK_BUSAON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpuart1: serial@44380000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x44380000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@44390000 { + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart", + "fsl,imx7ulp-lpuart"; + reg = <0x44390000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_LPUART2>; + clock-names = "ipg"; + status = "disabled"; + }; + + adc1: adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_ADC>; + clock-names = "ipg"; + status = "disabled"; + }; + + mu2: mailbox@445b0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445b0000 0x1000>; + ranges; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + #mbox-cells = <2>; + + sram0: sram@445b1000 { + compatible = "mmio-sram"; + reg = <0x445b1000 0x400>; + ranges = <0x0 0x445b1000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + scmi_buf0: scmi-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + scmi_buf1: scmi-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + }; + + }; + + mu3: mailbox@445d0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445d0000 0x10000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu4: mailbox@445f0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445f0000 0x10000>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu6: mailbox@44630000 { + compatible = "fsl,imx95-mu"; + reg = <0x44630000 0x10000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + #mbox-cells = <2>; + status = "disabled"; + }; + }; + + mailbox@47320000 { + compatible = "fsl,imx95-mu-v2x"; + reg = <0x0 0x47320000 0x0 0x10000>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + mailbox@47350000 { + compatible = "fsl,imx95-mu-v2x"; + reg = <0x0 0x47350000 0x0 0x10000>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + /* GPIO1 is under exclusive control of System Manager */ + gpio1: gpio@47400000 { + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio"; + reg = <0x0 0x47400000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&scmi_clk IMX95_CLK_M33>, + <&scmi_clk IMX95_CLK_M33>; + clock-names = "gpio", "port"; + gpio-ranges = <&scmi_iomuxc 0 112 16>; + status = "disabled"; + }; + + elemu0: mailbox@47520000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47520000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + elemu1: mailbox@47530000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47530000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + elemu2: mailbox@47540000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47540000 0x0 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + elemu3: mailbox@47550000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47550000 0x0 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + elemu4: mailbox@47560000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47560000 0x0 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + elemu5: mailbox@47570000 { + compatible = "fsl,imx95-mu-ele"; + reg = <0x0 0x47570000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + aips4: bus@49000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x0 0x49000000 0x0 0x800000>; + ranges = <0x49000000 0x0 0x49000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + smmu: iommu@490d0000 { + compatible = "arm,smmu-v3"; + reg = <0x490d0000 0x100000>; + interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + }; + + pcie0: pcie@4c300000 { + compatible = "fsl,imx95-pcie"; + reg = <0 0x4c300000 0 0x10000>, + <0 0x60100000 0 0xfe00000>, + <0 0x4c360000 0 0x10000>, + <0 0x4c340000 0 0x2000>; + reg-names = "dbi", "config", "atu", "app"; + ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>, + <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + num-viewport = <8>; + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcie0_ep: pcie-ep@4c300000 { + compatible = "fsl,imx95-pcie-ep"; + reg = <0 0x4c300000 0 0x10000>, + <0 0x4c360000 0 0x1000>, + <0 0x4c320000 0 0x1000>, + <0 0x4c340000 0 0x2000>, + <0 0x4c370000 0 0x10000>, + <0x9 0 1 0>; + reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + status = "disabled"; + }; + + pcie1: pcie@4c380000 { + compatible = "fsl,imx95-pcie"; + reg = <0 0x4c380000 0 0x10000>, + <8 0x80100000 0 0xfe00000>, + <0 0x4c3e0000 0 0x10000>, + <0 0x4c3c0000 0 0x2000>; + reg-names = "dbi", "config", "atu", "app"; + ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>, + <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + num-viewport = <8>; + interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcie1_ep: pcie-ep@4c380000 { + compatible = "fsl,imx95-pcie-ep"; + reg = <0 0x4c380000 0 0x10000>, + <0 0x4c3e0000 0 0x1000>, + <0 0x4c3a0000 0 0x1000>, + <0 0x4c3c0000 0 0x2000>, + <0 0x4c3f0000 0 0x10000>, + <0xa 0 1 0>; + reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; + assigned-clock-rates = <3600000000>, <100000000>, <10000000>; + assigned-clock-parents = <0>, <0>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi index dbd2fc3ba790..65f7b5a50eb5 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -32,7 +32,7 @@ fman@1a00000 { mdio@f1000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xf1000 0x1000>; pcsphy6: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi index 6fc5d2560057..3f70482c98c3 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -32,7 +32,7 @@ fman@1a00000 { mdio@f3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xf3000 0x1000>; pcsphy7: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi index 4e02276fcf99..78841c1f3252 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@e1000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xe1000 0x1000>; pcsphy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi index 0312fa43fa77..1f43fa666222 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@e3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xe3000 0x1000>; pcsphy1: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi index af2df07971dd..de0aa017701d 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@e5000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xe5000 0x1000>; pcsphy2: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi index 4ac98dc8b227..6904aa5d8e54 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@e7000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xe7000 0x1000>; pcsphy3: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi index bd932d8b0160..a3d29d470297 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@e9000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xe9000 0x1000>; pcsphy4: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi index 7de1c5203f3e..01b78c0463a7 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -31,7 +31,7 @@ fman@1a00000 { mdio@eb000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xeb000 0x1000>; pcsphy5: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index ae1c2abaaf36..b0390b711fef 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -67,14 +67,14 @@ fman0: fman@1a00000 { mdio0: mdio@fc000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xfc000 0x1000>; }; xmdio0: mdio@fd000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + compatible = "fsl,fman-memac-mdio"; reg = <0xfd000 0x1000>; }; }; diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi index d98469a7c47c..366912bf3d5e 100644 --- a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi +++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi @@ -61,12 +61,16 @@ flash0: flash@0 { reg = <0>; - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <66000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 7e137a884ae5..957a1b41f19b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1161,7 +1161,7 @@ }; usb3_otg_bc: usb3_otg_bc@ff200000 { - compatible = "syscon", "simple-mfd"; + compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd"; reg = <0x0 0xff200000 0x0 0x1000>; usb_phy: usb-phy { diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index ad99aefeb185..b31cfa6b802d 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -106,8 +106,6 @@ &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 2d70a92c2090..7952c7f47cc2 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -83,8 +83,6 @@ &qspi { status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 99b8cb3c49e1..ce751b5028e2 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -28,3 +28,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index 63fbc8352161..56930f2ce481 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -41,7 +41,7 @@ keys { compatible = "gpio-keys"; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; @@ -57,17 +57,17 @@ leds { compatible = "gpio-leds"; - vpn { + led-vpn { label = "green:vpn"; gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; }; - wan { + led-wan { label = "green:wan"; gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; }; - led_power: power { + led_power: led-power { label = "green:power"; gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; default-state = "on"; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts new file mode 100644 index 000000000000..788a5c302b17 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + * DTS for SolidRun CN9130 Clearfog Base. + * + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Base"; + compatible = "solidrun,cn9130-clearfog-base", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; + + rfkill-m2-gnss { + compatible = "rfkill-gpio"; + label = "m.2 GNSS"; + radio-type = "gps"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>; + }; + + /* M.2 is B-keyed, so w-disable is for WWAN */ + rfkill-m2-wwan { + compatible = "rfkill-gpio"; + label = "m.2 WWAN"; + radio-type = "wwan"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SRDS #3 - SGMII 1GE */ +&cp0_eth1 { + phy = <&phy1>; + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; +}; + +&cp0_gpio1 { + sim-select-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sim-select"; + }; +}; + +&cp0_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + * + * Configure LEDs electrical polarity + * - on-state: low + * - off-state: high (not hi-z, to avoid residual glow) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>, + <3 17 0x003f 0x000a>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&cp0_pinctrl { + pinctrl-0 = <&sim_select_pins>; + pintrl-names = "default"; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sim_select_pins: cp0-sim-select-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; +}; + +/* + * SRDS #4 - USB 3.0 host on M.2 connector + * USB-2.0 Host on Type-A connector + */ +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + m2-full-card-power-off-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; + + m2-reset-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-reset"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts new file mode 100644 index 000000000000..a27fe0042867 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + * DTS for SolidRun CN9130 Clearfog Pro. + * + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Pro"; + compatible = "solidrun,cn9130-clearfog-pro", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; +}; + +/* SRDS #3 - SGMII 1GE to L2 switch */ +&cp0_eth1 { + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour similar to switch ports: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (red) + * - LED[2]: high impedance (floating) + * + * Switch port defaults: + * - LED0: link/activity: On/blink (green) + * - LED1: link is 1000Mbps: On (red) + * + * Identical configuration is impossible with hardware offload. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + label = "LED2"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_WAN; + label = "LED1"; + default-state = "keep"; + }; + }; +}; + +&cp0_mdio { + ethernet-switch@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-0 = <&dsa_clk_pins &dsa_pins>; + pinctrl-names = "default"; + reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan5"; + phy = <&switch0phy0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + label = "LED12"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_LAN; + label = "LED11"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan4"; + phy = <&switch0phy1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + label = "LED10"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_LAN; + label = "LED9"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy = <&switch0phy2>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + label = "LED8"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_LAN; + label = "LED7"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan2"; + phy = <&switch0phy3>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + label = "LED6"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_LAN; + label = "LED5"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan1"; + phy = <&switch0phy4>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + label = "LED4"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_LAN; + label = "LED3"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet-port@6 { + reg = <6>; + label = "lan6"; + phy-mode = "rgmii"; + + /* + * Because of mdio address conflict the + * external phy is not readable. + * Force a fixed link instead. + */ + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + /* + * Indirectly configure default behaviour + * for port lan6 leds behind external phy. + * Internal PHYs are not using page 3, + * therefore writing to it is safe. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + /* + * There is an external phy on the switch mdio bus. + * Because its mdio address collides with internal phys, + * it is not readable. + * + * mdio-external { + * compatible = "marvell,mv88e6xxx-mdio-external"; + * #address-cells = <1>; + * #size-cells = <0>; + * + * ethernet-phy@1 { + * reg = <0x1>; + * }; + * }; + */ + }; +}; + +/* SRDS #4 - miniPCIe (CON2) */ +&cp0_pcie1 { + num-lanes = <1>; + phys = <&cp0_comphy4 1>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + dsa_clk_pins: cp0-dsa-clk-pins { + marvell,pins = "mpp40"; + marvell,function = "synce1"; + }; + + dsa_pins: cp0-dsa-pins { + marvell,pins = "mpp27", "mpp29"; + marvell,function = "gpio"; + }; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_spi1_cs1_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; +}; + +&cp0_spi1 { + /* add pin for chip-select 1 on mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>; +}; + +/* USB-2.0 Host on Type-A connector */ +&cp0_usb3_1 { + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + /* CON2 */ + pcie1-0-clkreq-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + + /* CON2 */ + pcie1-0-w-disable-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi new file mode 100644 index 000000000000..ad0ab34b6602 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + * DTS for common base of SolidRun CN9130 Clearfog Base and Pro. + * + */ + +/ { + aliases { + /* label nics same order as armada 388 clearfog */ + ethernet0 = &cp0_eth2; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth0; + i2c1 = &cp0_i2c1; + mmc1 = &cp0_sdhci0; + }; + + reg_usb3_vbus0: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +/* SRDS #2 - SFP+ 10GE */ +&cp0_eth0 { + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + phy-mode = "10gbase-r"; + sfp = <&sfp>; + status = "okay"; +}; + +&cp0_i2c0 { + expander0: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&expander0_pins>; + pinctrl-names = "default"; + interrupt-parent = <&cp0_gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* CON3 */ + pcie2-0-clkreq-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + + /* CON3 */ + pcie2-0-w-disable-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + + usb3-ilimit-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + + m2-devslp-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + }; + + /* The MCP3021 supports standard and fast modes */ + adc@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + carrier_eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <8>; + }; +}; + +&cp0_i2c1 { + /* + * Routed to SFP, M.2, mikrobus, and miniPCIe + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&cp0_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* SRDS #5 - miniPCIe (CON3) */ +&cp0_pcie2 { + num-lanes = <1>; + phys = <&cp0_comphy5 2>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_mmc0_pins: cp0-mmc0-pins { + marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + + mikro_spi_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; + + mikro_uart_pins: cp0-uart-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "uart1"; + }; + + expander0_pins: cp0-expander0-pins { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; +}; + +/* SRDS #0 - SATA on M.2 connector */ +&cp0_sata0 { + phys = <&cp0_comphy0 1>; + status = "okay"; + + /* only port 1 is available */ + /delete-node/ sata-port@0; +}; + +/* microSD */ +&cp0_sdhci0 { + pinctrl-0 = <&cp0_mmc0_pins>; + pinctrl-names = "default"; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&cp0_spi1 { + /* CS1 for mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>; +}; + +/* + * SRDS #1 - USB-3.0 Host on Type-A connector + * USB-2.0 Host on mPCI-e connector (CON3) + */ +&cp0_usb3_0 { + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "comphy", "utmi"; + vbus-supply = <®_usb3_vbus0>; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* mikrobus uart */ +&cp0_uart0 { + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi new file mode 100644 index 000000000000..4676e3488f54 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun CN9130 SoM"; + compatible = "solidrun,cn9130-sr-som", "marvell,cn9130"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + i2c0 = &cp0_i2c0; + mmc0 = &ap_sdhci0; + rtc0 = &cp0_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v_1_8: regulator-1-8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* requires assembly of R9307 */ + vhv: regulator-vhv-1-8 { + compatible = "regulator-fixed"; + regulator-name = "vhv-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&cp0_reg_vhv_pins>; + pinctrl-names = "default"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ap_pinctrl { + ap_mmc0_pins: ap-mmc0-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12"; + marvell,function = "sdio"; + /* + * mpp12 is emmc reset, function should be sdio (hw_rst), + * but pinctrl-mvebu does not support this. + * + * From pinctrl-mvebu.h: + * "The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes." + */ + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + pinctrl-0 = <&ap_mmc0_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* for assembly with phy */ +&cp0_eth2 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_eth2_pins>; + phy-mode = "rgmii-id"; + phy = <&cp0_eth2_phy>; + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + som_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&cp0_mdio { + pinctrl-0 = <&cp0_mdio_pins>; + status = "okay"; + + /* assembly option */ + cp0_eth2_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + /* max speed limited by a mux */ + spi-max-frequency = <1800000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_eth2_pins: cp0-ge2-rgmii-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", + "mpp48", "mpp49", "mpp50", "mpp51", + "mpp52", "mpp53", "mpp54", "mpp55"; + /* docs call it "ge2", but cp110-pinctrl "ge1" */ + marvell,function = "ge1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_mdio_pins: cp0-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_reg_vhv_pins: cp0-reg-vhv-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + }; +}; + +/* AP default console */ +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts new file mode 100644 index 000000000000..b1ea7dcaed17 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts @@ -0,0 +1,637 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + * DTS for SolidRun CN9130 Clearfog Base. + * + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" + +/* + * Instantiate the external CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +/ { + model = "SolidRun CN9131 SolidWAN"; + compatible = "solidrun,cn9131-solidwan", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp1_eth2; + ethernet2 = &cp0_eth1; + ethernet3 = &cp0_eth2; + ethernet4 = &cp0_eth0; + ethernet5 = &cp1_eth0; + gpio0 = &ap_gpio; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + gpio5 = &expander0; + i2c0 = &cp0_i2c0; + i2c1 = &cp0_i2c1; + i2c2 = &cp1_i2c1; + mmc0 = &ap_sdhci0; + mmc1 = &cp0_sdhci0; + rtc0 = &cp0_rtc; + rtc1 = &carrier_rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_led_pins &cp1_led_pins>; + + /* for sfp-1 (J42) */ + led-sfp1-activity { + label = "sfp1:green"; + gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + /* for sfp-1 (J42) */ + led-sfp1-link { + label = "sfp1:yellow"; + gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + + /* (J28) */ + led-sfp0-activity { + label = "sfp0:green"; + gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>; + }; + + /* (J28) */ + led-sfp0-link { + label = "sfp0:yellow"; + gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Type-A port on J53 */ + reg_usb_a_vbus0: regulator-usb-a-vbus0 { + compatible = "regulator-fixed"; + pinctrl-0 = <&cp0_reg_usb_a_vbus0_pins>; + pinctrl-names = "default"; + regulator-name = "vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&cp0_gpio1 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_a_vbus1: regulator-usb-a-vbus1 { + compatible = "regulator-fixed"; + pinctrl-0 = <&cp0_reg_usb_a_vbus1_pins>; + pinctrl-names = "default"; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&cp0_gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + pinctrl-0 = <&cp0_sfp0_pins>; + pinctrl-names = "default"; + i2c-bus = <&cp0_i2c1>; + los-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp0_gpio2 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio1 31 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + pinctrl-0 = <&cp1_sfp1_pins>; + pinctrl-names = "default"; + i2c-bus = <&cp1_i2c1>; + los-gpios = <&cp1_gpio2 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio2 18 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio2 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio2 17 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SRDS #2 - SFP+ 10GE */ +&cp0_eth0 { + managed = "in-band-status"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp0>; + status = "okay"; +}; + +/* SRDS #3 - SGMII 1GE */ +&cp0_eth1 { + managed = "in-band-status"; + phy-mode = "sgmii"; + /* Without mdio phy access rely on sgmii auto-negotiation. */ + phys = <&cp0_comphy3 1>; + status = "okay"; +}; + +/* SRDS #1 - SGMII */ +&cp0_eth2 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + managed = "in-band-status"; + phy-mode = "sgmii"; + phy = <&cp0_phy1>; + phys = <&cp0_comphy1 2>; +}; + +&cp0_gpio1 { + pcie0-0-w-disable-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie0.0-w-disable"; + }; + + /* J34 */ + m2-full-card-power-off-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; +}; + +&cp0_i2c0 { + /* assembly option */ + fan-controller@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + expander0: gpio@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + + usb-a-vbus0-ilimit-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "vbus0-ilimit"; + }; + + /* duplicate connection, controlled by soc gpio */ + usb-vbus0-enable-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + input; + line-name = "vbus0-enable"; + }; + + usb-a-vbus1-ilimit-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + input; + line-name = "vbus1-ilimit"; + }; + + /* duplicate connection, controlled by soc gpio */ + usb-vbus1-enable-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + input; + line-name = "vbus1-enable"; + }; + }; + + carrier_eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <8>; + }; + + /* usb-hub@60 */ + + /* assembly option */ + carrier_rtc: rtc@68 { + compatible = "st,m41t83"; + reg = <0x68>; + pinctrl-0 = <&cp1_rtc_pins>; + pinctrl-names = "default"; + interrupt-parent = <&cp1_gpio1>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&cp1_gpio1 13 GPIO_ACTIVE_LOW>; + }; +}; + +&cp0_i2c1 { + /* + * Routed to SFP. + * Limit to 100kHz for compatibility with SFP modules, + * featuring AT24C01A/02/04 at addresses 0x50/0x51. + */ + clock-frequency = <100000>; + pinctrl-0 = <&cp0_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cp0_mdio { + /* + * SoM + Carrier each have a PHY at address 0. + * Remove the SoM phy node, and skip adding the carrier node. + * SGMII Auto-Negotation is enabled by bootloader for + * autonomous operation without mdio control. + */ + /delete-node/ ethernet-phy@0; + + /* U17016 */ + cp0_phy1: ethernet-phy@1 { + reg = <1>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link is 1000Mbps: On (yellow) + * - LED[1]: link/activity: On/blink (green) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a17>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +/* SRDS #0 - miniPCIe */ +&cp0_pcie0 { + num-lanes = <1>; + phys = <&cp0_comphy0 0>; + status = "okay"; +}; + +/* SRDS #5 - M.2 B-Key (J34) */ +&cp0_pcie2 { + num-lanes = <1>; + phys = <&cp0_comphy5 2>; + status = "okay"; +}; + +&cp0_pinctrl { + pinctrl-0 = <&cp0_m2_0_shutdown_pins &cp0_mpcie_rfkill_pins>; + pinctrl-names = "default"; + + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_led_pins: cp0-led-pins { + marvell,pins = "mpp4", "mpp7"; + marvell,function = "gpio"; + }; + + cp0_m2_0_shutdown_pins: cp0-m2-0-shutdown-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + cp0_mmc0_pins: cp0-mmc0-pins { + marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + + cp0_mpcie_rfkill_pins: cp0-mpcie-rfkill-pins { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + cp0_reg_usb_a_vbus0_pins: cp0-reg-usb-a-vbus0-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + cp0_reg_usb_a_vbus1_pins: cp0-reg-usb-a-vbus1-pins { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + cp0_sfp0_pins: cp0-sfp0-pins { + marvell,pins = "mpp31", "mpp32", "mpp33", "mpp34"; + marvell,function = "gpio"; + }; + + cp0_spi1_cs1_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; +}; + +/* microSD */ +&cp0_sdhci0 { + pinctrl-0 = <&cp0_mmc0_pins>; + pinctrl-names = "default"; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&cp0_spi1 { + /* add pin for chip-select 1 */ + pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>; + + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +/* USB-2.0 Host to USB-Hub */ +&cp0_usb3_0 { + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +/* SRDS #4 - USB-3.0 Host to USB-Hub */ +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp0_utmi1 { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* SRDS #4 - SFP+ 10GE */ +&cp1_eth0 { + managed = "in-band-status"; + phy-mode = "10gbase-r"; + phys = <&cp1_comphy4 0>; + sfp = <&sfp1>; + status = "okay"; +}; + +/* SRDS #3 - SGMII 1GE */ +&cp1_eth1 { + managed = "in-band-status"; + phy-mode = "sgmii"; + phy = <&cp1_phy0>; + phys = <&cp0_comphy3 1>; + status = "okay"; +}; + +/* SRDS #5 - SGMII 1GE */ +&cp1_eth2 { + managed = "in-band-status"; + phy-mode = "sgmii"; + phy = <&cp1_phy1>; + phys = <&cp0_comphy5 2>; + status = "okay"; +}; + +&cp1_gpio1 { + status = "okay"; + + /* J30 */ + m2-full-card-power-off-hog-0 { + gpio-hog; + gpios = <29 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; + + /* J44 */ + m2-full-card-power-off-hog-1 { + gpio-hog; + gpios = <30 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c1 { + /* + * Routed to SFP. + * Limit to 100kHz for compatibility with SFP modules, + * featuring AT24C01A/02/04 at addresses 0x50/0x51. + */ + clock-frequency = <100000>; + pinctrl-0 = <&cp1_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cp1_mdio { + pinctrl-0 = <&cp1_mdio_pins>; + pinctrl-names = "default"; + status = "okay"; + + cp1_phy0: ethernet-phy@0 { + reg = <0>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link is 1000Mbps: On (yellow) + * - LED[1]: link/activity: On/blink (green) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a17>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + cp1_phy1: ethernet-phy@1 { + reg = <1>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link is 1000Mbps: On (yellow) + * - LED[1]: link/activity: On/blink (green) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a17>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +/* SRDS #0 - M.2 (J30) */ +&cp1_pcie0 { + num-lanes = <1>; + phys = <&cp1_comphy0 0>; + status = "okay"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +/* SRDS #1 - SATA on M.2 (J44) */ +&cp1_sata0 { + phys = <&cp1_comphy1 0>; + status = "okay"; + + /* only port 0 is available */ + /delete-node/ sata-port@1; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + pinctrl-0 = <&cp1_m2_1_shutdown_pins &cp1_m2_2_shutdown_pins>; + pinctrl-names = "default"; + + cp1_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp1_led_pins: cp1-led-pins { + marvell,pins = "mpp54", "mpp55"; + marvell,function = "gpio"; + }; + + cp1_m2_1_shutdown_pins: cp1-m2-1-shutdown-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_m2_2_shutdown_pins: cp1-m2-2-shutdown-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + cp1_mdio_pins: cp1-mdio-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "ge"; + }; + + cp1_rtc_pins: cp1-rtc-pins { + marvell,pins = "mpp12", "mpp13"; + marvell,function = "gpio"; + }; + + cp1_sfp1_pins: cp1-sfp1-pins { + marvell,pins = "mpp33", "mpp34", "mpp49", "mpp50"; + marvell,function = "gpio"; + }; + }; +}; + +/* + * SRDS #2 - USB-3.0 Host to M.2 (J44) + * USB-2.0 Host to M.2 (J30) + */ +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>, <&cp1_utmi0>; + phy-names = "comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +/* USB-2.0 Host to M.2 (J44) */ +&cp1_usb3_1 { + phys = <&cp1_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp1_utmi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts new file mode 100644 index 000000000000..0f53745a6fa0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts @@ -0,0 +1,673 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + * DTS for SolidRun CN9132 Clearfog. + * + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "cn9130.dtsi" +#include "cn9132-sr-cex7.dtsi" + +/ { + model = "SolidRun CN9132 Clearfog"; + compatible = "solidrun,cn9132-clearfog", + "solidrun,cn9132-sr-cex7", "marvell,cn9130"; + + aliases { + ethernet1 = &cp0_eth2; + ethernet2 = &cp0_eth0; + ethernet3 = &cp2_eth0; + ethernet4 = &cp1_eth0; + i2c7 = &carrier_mpcie_i2c; + i2c8 = &carrier_ptp_i2c; + mmc1 = &cp0_sdhci0; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_wake0_pins>; + + button-0 { + label = "SW2"; + gpios = <&cp1_gpio2 8 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_2>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_batlow_pins &cp2_rsvd4_pins>; + + /* LED11 */ + led-io-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + function-enumerator = <0>; + default-state = "off"; + gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + /* LED12 */ + led-io-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + default-state = "off"; + gpios = <&cp2_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + }; + + /* CON4 W_DISABLE1/W_DISABLE2 */ + rfkill-m2-wlan { + compatible = "rfkill-gpio"; + label = "m.2 wlan (CON4)"; + radio-type = "wlan"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_10g_phy_rst_01_pins>; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&cp1_gpio2 11 GPIO_ACTIVE_HIGH>; + }; + + /* CON5 W_DISABLE1/W_DISABLE2 */ + rfkill-m2-wlan { + compatible = "rfkill-gpio"; + label = "m.2 wlan (CON5)"; + radio-type = "wlan"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_10g_phy_rst_23_pins>; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&cp1_gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + /* J21 W_DISABLE1 */ + rfkill-m2-wwan { + compatible = "rfkill-gpio"; + label = "m.2 wwan (J21)"; + radio-type = "wwan"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_rsvd3_pins>; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + /* J21 W_DISABLE1 */ + rfkill-m2-gnss { + compatible = "rfkill-gpio"; + label = "m.2 gnss (J21)"; + radio-type = "gps"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_rsvd8_pins>; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&cp2_gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + /* J14 W_DISABLE */ + rfkill-mpcie-wlan { + compatible = "rfkill-gpio"; + label = "mpcie wlan (J14)"; + radio-type = "wlan"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_rsvd2_pins>; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&com_10g_sfp_i2c0>; + pinctrl-names = "default"; + pinctrl-0 = <&com_10g_int0_pins>; + mod-def0-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; +}; + +&com_smbus { + /* This bus is also routed to STM32 BMC Microcontroller (U2) */ + + power-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + #io-channel-cells = <1>; + label = "vdd_12v0"; + shunt-resistor = <2000>; + }; + + adc@48 { + compatible = "ti,tla2021"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + /* supplied by chaoskey hardware noise generator circuit */ + channel@0 { + reg = <0>; + }; + }; +}; + +&cp0_eth_phy0 { + /* + * Configure LEDs default behaviour: + * - LED[0]: link is 1000Mbps: On (yellow): 0111 + * - LED[1]: link/activity: On/Blink (green): 0001 + * - LED[2]: Off (green): 1000 + */ + marvell,reg-init = <3 16 0xf000 0x0817>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + /* link */ + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + /* act */ + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + /* 1000 */ + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; +}; + +/* SRDS #4 - 10GE */ +&cp0_eth0 { + phys = <&cp0_comphy4 0>; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + sfp = <&sfp>; + status = "okay"; +}; + +&cp0_eth2 { + phy-mode = "2500base-x"; + phys = <&cp0_comphy5 2>; + status = "okay"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; +}; + +&cp0_i2c1 { + /* + * Both COM and Carrier Board have a PCA9547 i2c mux at 0x77. + * Describe them as a single device merging each child bus. + */ + + i2c-mux@77 { + i2c@0 { + /* Routed to Full PCIe (J4) */ + }; + + i2c@1 { + /* Routed to USB Hub (U29) */ + }; + + i2c@2 { + /* Routed to M.2 (CON4) */ + }; + + i2c@3 { + /* Routed to M.2 (CON5) */ + }; + + i2c@4 { + /* Routed to M.2 (J21) */ + }; + + carrier_mpcie_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + /* Routed to mini-PCIe (J14) */ + }; + + carrier_ptp_i2c: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + /* Routed to various optional PTP related components */ + }; + }; +}; + +&cp0_mdio { + ethernet-switch@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy1: ethernet-phy@1 { + reg = <0x11>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x12>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x13>; + }; + + sw_phy4: ethernet-phy@4 { + reg = <0x14>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan4"; + phy-handle = <&sw_phy4>; + phy-mode = "internal"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + ethernet-port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth2>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; +}; + +/* SRDS #0,#1,#2,#3 - PCIe */ +&cp0_pcie0 { + num-lanes = <4>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * configure unused gpios exposed via pin headers: + * - J7-10: PWRBTN + */ + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pwrbtn_pins>; +}; + +/* microSD */ +&cp0_sdhci0 { + pinctrl-0 = <&cp0_mmc0_pins>, <&cp0_mmc0_cd_pins>; + pinctrl-names = "default"; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&cp0_spi1 { + /* add CS1 */ + pinctrl-0 = <&cp0_spi1_pins>, <&cp0_spi1_cs1_pins>; + + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +/* J38 */ +&cp0_uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart2_pins>; + status = "okay"; +}; + +&cp0_utmi { + /* M.2 "CON5" swaps D+/D- */ + swap-dx-lanes = <1>; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* SRDS #2 - 5GE */ +&cp1_eth0 { + phys = <&cp1_comphy2 0>; + phy-mode = "5gbase-r"; + phy = <&cp1_eth_phy0>; + managed = "in-band-status"; + status = "okay"; +}; + +/* SRDS #0,#1 - PCIe */ +&cp1_pcie0 { + num-lanes = <2>; + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + status = "okay"; +}; + +/* SRDS #4 - PCIe */ +&cp1_pcie1 { + num-lanes = <1>; + phys = <&cp1_comphy4 1>; + status = "okay"; +}; + +/* SRDS #5 - PCIe */ +&cp1_pcie2 { + num-lanes = <1>; + phys = <&cp1_comphy5 2>; + status = "okay"; +}; + +&cp1_pinctrl { + /* + * configure unused gpios exposed via pin headers: + * - J7-8: RSVD16 + * - J7-10: THRM + * - J10-1: WAKE1 + * - J10-2: SATA_ACT + * - J10-8: THERMTRIP + */ + pinctrl-names = "default"; + pinctrl-0 = <&cp1_rsvd16_pins &cp1_sata_act_pins &cp1_thrm_irq_pins>, + <&cp1_thrm_trip_pins &cp1_wake1_pins>; +}; + +/* SRDS #3 - SATA */ +&cp1_sata0 { + status = "okay"; + + /* only port 1 is available */ + /delete-node/ sata-port@0; + + sata-port@1 { + phys = <&cp1_comphy3 1>; + }; +}; + +&cp1_utmi { + /* M.2 "CON4" swaps D+/D- */ + swap-dx-lanes = <0>; +}; + +&cp1_xmdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xmdio_pins>; + status = "okay"; + + cp1_eth_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&com_10g_int1_pins>; + interrupt-parent = <&cp1_gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SRDS #2 - 5GE */ +&cp2_eth0 { + phys = <&cp2_comphy2 0>; + phy-mode = "5gbase-r"; + phy = <&cp2_eth_phy0>; + managed = "in-band-status"; + status = "okay"; +}; + +&cp2_gpio1 { + pinctrl-names= "default"; + pinctrl-0 = <&cp2_rsvd9_pins>; + + /* J21 */ + m2-wwan-reset-hog { + gpio-hog; + gpios = <9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + output-low; + line-name = "m2-wwan-reset"; + }; +}; + +/* SRDS #0 - PCIe */ +&cp2_pcie0 { + num-lanes = <1>; + phys = <&cp2_comphy0 0>; + status = "okay"; +}; + +/* SRDS #4 - PCIe */ +&cp2_pcie1 { + num-lanes = <1>; + phys = <&cp2_comphy4 1>; + status = "okay"; +}; + +/* SRDS #5 - PCIe */ +&cp2_pcie2 { + num-lanes = <1>; + phys = <&cp2_comphy5 2>; + status = "okay"; +}; + +&cp2_pinctrl { + /* + * configure unused gpios exposed via pin headers: + * - J7-1: RSVD10 + * - J7-3: RSVD11 + * - J7-5: RSVD56 + * - J7-6: RSVD7 + * - J7-7: RSVD27 + * - J10-3: RSVD31 + * - J10-5: RSVD5 + * - J10-6: RSVD32 + * - J10-7: RSVD0 + * - J10-9: RSVD1 + */ + pinctrl-names = "default"; + pinctrl-0 = <&cp2_rsvd0_pins &cp2_rsvd1_pins &cp2_rsvd5_pins>, + <&cp2_rsvd7_pins &cp2_rsvd10_pins &cp2_rsvd11_pins>, + <&cp2_rsvd27_pins &cp2_rsvd31_pins &cp2_rsvd32_pins>, + <&cp2_rsvd56_pins>; +}; + +/* SRDS #3 - SATA */ +&cp2_sata0 { + status = "okay"; + + /* only port 1 is available */ + /delete-node/ sata-port@0; + + sata-port@1 { + phys = <&cp2_comphy3 1>; + }; +}; + +&cp2_xmdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp2_xmdio_pins>; + status = "okay"; + + cp2_eth_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&com_10g_int2_pins>; + interrupt-parent = <&cp2_gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi new file mode 100644 index 000000000000..afc041c1c448 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi @@ -0,0 +1,712 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> + * + */ + +#include <dt-bindings/gpio/gpio.h> + +/* + * Instantiate the first external CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +/* + * Instantiate the second external CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +/ { + model = "SolidRun CN9132 COM Express Type 7 Module"; + compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130"; + + aliases { + ethernet0 = &cp0_eth1; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + i2c0 = &cp0_i2c0; + i2c1 = &cp0_i2c1; + i2c2 = &com_clkgen_i2c; + i2c3 = &com_10g_led_i2c; + i2c4 = &com_10g_sfp_i2c0; + i2c5 = &com_smbus; + i2c6 = &com_fanctrl_i2c; + mmc0 = &ap_sdhci0; + rtc0 = &cp0_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 51 102 153 204 255>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>; + pwms = <&cp0_gpio2 7 40000>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + }; + + v_1_8: regulator-1-8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ap_vhv: regulator-ap-vhv-1-8 { + compatible = "regulator-fixed"; + regulator-name = "ap-vhv-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&cp0_reg_ap_vhv_pins>; + pinctrl-names = "default"; + gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cp_vhv: regulator-cp-vhv-1-8 { + compatible = "regulator-fixed"; + regulator-name = "cp-vhv-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&cp0_reg_cp_vhv_pins>; + pinctrl-names = "default"; + gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ap_pinctrl { + ap_mmc0_pins: ap-mmc0-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12"; + marvell,function = "sdio"; + /* + * mpp12 is emmc reset, function should be sdio (hw_rst), + * but pinctrl-mvebu does not support this. + * + * From pinctrl-mvebu.h: + * "The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes." + */ + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + pinctrl-0 = <&ap_mmc0_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; + +&ap_thermal_ic { + polling-delay = <1000>; + + trips { + ap_active: trip-active { + temperature = <40000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&ap_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + + map1 { + trip = <&ap_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_eth1_pins>; + phy-mode = "rgmii-id"; + phy = <&cp0_eth_phy0>; + status = "okay"; +}; + +&cp0_gpio1 { + status = "okay"; + + /* + * Tacho signal used as interrupt source by pwm-fan driver. + * Hog IO as input to ensure mvebu-gpio irq driver`s + * irq_set_type can succeed. + */ + pwm-tacho-irq-hog { + gpio-hog; + gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + input; + line-name = "fan-tacho"; + }; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + com_eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <8>; + }; + + eeprom@53 { + compatible = "atmel,spd"; + reg = <0x53>; + }; +}; + +&cp0_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + i2c-mux-idle-disconnect; + #address-cells = <1>; + #size-cells = <0>; + + com_clkgen_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + /* clock-controller@6b */ + }; + + com_10g_led_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + /* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */ + }; + + com_10g_sfp_i2c0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */ + }; + + com_smbus: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + /* Routed to B2B Connector as SBM_CLK/DAT */ + }; + + com_fanctrl_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + /* fan-controller@2f (assembly option) */ + }; + }; +}; + +&cp0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_mdio_pins>; + status = "okay"; + + cp0_eth_phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + com_10g_int0_pins: cp0-10g-int-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp0_eth1_pins: cp0-eth1-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + /* docs call it "ge1", but cp110-pinctrl "ge0" */ + marvell,function = "ge0"; + }; + + cp0_fan_pwm_pins: cp0-fan-pwm-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_fan_tacho_pins: cp0-fan-tacho-pins { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_mdio_pins: cp0-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + + cp0_mmc0_pins: cp0-mmc0-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + + cp0_mmc0_cd_pins: cp0-mmc0-cd-pins { + marvell,pins = "mpp55"; + marvell,function = "sdio_cd"; + }; + + cp0_pwrbtn_pins: cp0-pwrbtn-pins { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_spi1_cs1_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; + + cp0_uart2_pins: cp0-uart2-pins { + marvell,pins = "mpp50", "mpp51"; + marvell,function = "uart2"; + }; + }; +}; + +&cp0_thermal_ic { + polling-delay = <1000>; + + trips { + cp0_active: trip-active { + temperature = <40000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&cp0_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + + map1 { + trip = <&cp0_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +/* USB-2.0 Host */ +&cp0_usb3_0 { + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +/* USB-2.0 Host */ +&cp0_usb3_1 { + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + tpm@0 { + reg = <0>; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <10000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_tpm_irq_pins>; + interrupt-parent = <&cp1_gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + com_10g_int1_pins: cp1-10g-int-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + cp1_batlow_pins: cp1-batlow-pins { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + cp1_rsvd16_pins: cp1-rsvd16-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_sata_act_pins: cp1-sata-act-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp1_spi1_pins: cp1-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_thrm_irq_pins: cp1-thrm-irq-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp1_thrm_trip_pins: cp1-thrm-trip-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp1_tpm_irq_pins: cp1-tpm-irq-pins { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + cp1_wake0_pins: cp1-wake0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp1_wake1_pins: cp1-wake1-pins { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + + cp1_xmdio_pins: cp1-xmdio-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "xg"; + }; + }; +}; + +&cp1_thermal_ic { + polling-delay = <1000>; + + trips { + cp1_active: trip-active { + temperature = <40000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&cp1_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + + map1 { + trip = <&cp1_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +/* USB-2.0 Host */ +&cp1_usb3_0 { + phys = <&cp1_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp1_utmi { + status = "okay"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_rtc { + status = "disabled"; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + com_10g_int2_pins: cp2-10g-int-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp2_rsvd0_pins: cp2-rsvd0-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + cp2_rsvd1_pins: cp2-rsvd1-pins { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + cp2_rsvd2_pins: cp2-rsvd2-pins { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + cp2_rsvd3_pins: cp2-rsvd3-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + cp2_rsvd4_pins: cp2-rsvd4-pins { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + cp2_rsvd5_pins: cp2-rsvd5-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + cp2_rsvd7_pins: cp2-rsvd7-pins { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + cp2_rsvd8_pins: cp2-rsvd8-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + cp2_rsvd9_pins: cp2-rsvd9-pins { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + cp2_rsvd10_pins: cp2-rsvd10-pins { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + cp2_rsvd11_pins: cp2-rsvd11-pins { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + cp2_rsvd27_pins: cp2-rsvd27-pins { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + cp2_rsvd31_pins: cp2-rsvd31-pins { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + cp2_rsvd32_pins: cp2-rsvd32-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp2_rsvd55_pins: cp2-rsvd55-pins { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + + cp2_rsvd56_pins: cp2-rsvd56-pins { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + cp2_xmdio_pins: cp2-xmdio-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "xg"; + }; + }; +}; + +&cp2_thermal_ic { + polling-delay = <1000>; + + trips { + cp2_active: trip-active { + temperature = <40000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&cp2_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + + map1 { + trip = <&cp2_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +/* USB-2.0/3.0 Host */ +&cp2_usb3_0 { + phys = <&cp2_utmi0>, <&cp2_comphy1 0>; + phy-names = "utmi", "comphy"; + dr_mode = "host"; + status = "okay"; +}; + +&cp2_utmi { + status = "okay"; +}; + +/* AP default console */ +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 37b4ca3a87c9..8fd7b2bb7a15 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -8,9 +8,12 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-openwrt-one.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo @@ -62,6 +65,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589824.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589825.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb @@ -69,6 +74,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r4.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-dojo-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb @@ -76,5 +82,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb + +# Device tree overlays support +DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@ +DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@ diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 234e3b23d7a8..c84c47c1352f 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -137,7 +137,7 @@ <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>, <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>, <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; }; rx_pins { pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>, @@ -151,7 +151,7 @@ mdio_pins { pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>, <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; input-enable; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts index 7364c7278276..91de920c2245 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -288,25 +288,25 @@ <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, <PINMUX_GPIO162__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-clk { pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; pins-rst { pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-ds { pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 224bb289660c..d12eac9b3eeb 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -149,9 +149,9 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7531"; - reg = <0>; + reg = <0x1f>; interrupt-controller; #interrupt-cells = <1>; interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>; @@ -329,8 +329,8 @@ /* eMMC is shared pin with parallel NAND */ emmc_pins_default: emmc-pins-default { mux { - function = "emmc", "emmc_rst"; - groups = "emmc"; + function = "emmc"; + groups = "emmc", "emmc_rst"; }; /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 41629769bdc8..8c3e2e2578bc 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -268,8 +268,8 @@ /* eMMC is shared pin with parallel NAND */ emmc_pins_default: emmc-pins-default { mux { - function = "emmc", "emmc_rst"; - groups = "emmc"; + function = "emmc"; + groups = "emmc", "emmc_rst"; }; /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts new file mode 100644 index 000000000000..54101cc08a25 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "mt7981b.dtsi" + +/ { + compatible = "cudy,wr3000-v1", "mediatek,mt7981b"; + model = "Cudy WR3000 V1"; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-wps { + label = "WPS"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + key-reset { + label = "RESET"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_LAN; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN_ONLINE; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts new file mode 100644 index 000000000000..4f6cbb491287 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; + +#include "mt7981b.dtsi" + +/ { + compatible = "openwrt,one", "mediatek,mt7981b"; + model = "OpenWrt One"; + + memory@40000000 { + reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi index 4feff3d1c5f4..64aeeb24efac 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/clock/mediatek,mt7981-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/mt7986-resets.h> / { compatible = "mediatek,mt7981b"; @@ -62,12 +63,19 @@ #clock-cells = <1>; }; - clock-controller@1001b000 { + topckgen: clock-controller@1001b000 { compatible = "mediatek,mt7981-topckgen", "syscon"; reg = <0 0x1001b000 0 0x1000>; #clock-cells = <1>; }; + watchdog: watchdog@1001c000 { + compatible = "mediatek,mt7986-wdt"; + reg = <0 0x1001c000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + clock-controller@1001e000 { compatible = "mediatek,mt7981-apmixedsys"; reg = <0 0x1001e000 0 0x1000>; @@ -78,20 +86,80 @@ compatible = "mediatek,mt7981-pwm"; reg = <0 0x10048000 0 0x1000>; clocks = <&infracfg CLK_INFRA_PWM_STA>, - <&infracfg CLK_INFRA_PWM_HCK>, - <&infracfg CLK_INFRA_PWM1_CK>, - <&infracfg CLK_INFRA_PWM2_CK>, - <&infracfg CLK_INFRA_PWM3_CK>; + <&infracfg CLK_INFRA_PWM_HCK>, + <&infracfg CLK_INFRA_PWM1_CK>, + <&infracfg CLK_INFRA_PWM2_CK>, + <&infracfg CLK_INFRA_PWM3_CK>; clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; #pwm-cells = <2>; }; + i2c@11007000 { + compatible = "mediatek,mt7981-i2c"; + reg = <0 0x11007000 0 0x1000>, + <0 0x10217080 0 0x80>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_I2C0_CK>, + <&infracfg CLK_INFRA_AP_DMA_CK>, + <&infracfg CLK_INFRA_I2C_MCK_CK>, + <&infracfg CLK_INFRA_I2C_PCK_CK>; + clock-names = "main", "dma", "arb", "pmic"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pio: pinctrl@11d00000 { + compatible = "mediatek,mt7981-pinctrl"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11c10000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11e00000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb", + "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint"; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + gpio-ranges = <&pio 0 0 56>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + efuse@11f20000 { + compatible = "mediatek,mt7981-efuse", "mediatek,efuse"; + reg = <0 0x11f20000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + clock-controller@15000000 { compatible = "mediatek,mt7981-ethsys", "syscon"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; + + wifi@18000000 { + compatible = "mediatek,mt7981-wmac"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>, + <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; + clock-names = "mcu", "ap2conn"; + resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; + reset-names = "consys"; + }; }; timer { diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso index 779dc6782bb1..047a8388811e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso @@ -9,21 +9,17 @@ / { compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; - - fragment@0 { - target-path = "/soc/mmc@11230000"; - __overlay__ { - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - hs400-ds-delay = <0x14014>; - non-removable; - no-sd; - no-sdio; - status = "okay"; - }; - }; }; +&{/soc/mmc@11230000} { + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x14014>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts new file mode 100644 index 000000000000..e2a2fea7adf0 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Authors: Frank Wunderlich <frank-w@public-files.de> + * Eric Woudstra <ericwouds@gmail.com> + * Tianling Shen <cnsztl@immortalwrt.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/mt65xx.h> + +#include "mt7986a.dtsi" + +/ { + model = "Bananapi BPI-R3 Mini"; + chassis-type = "embedded"; + compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dcin: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "12vd"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + /* + * The signal is inverted on this board and the PWM driver + * does not support polarity inversion. + */ + /* cooling level (0, 1, 2) */ + cooling-levels = <255 96 0>; + pwms = <&pwm 0 10000>; + }; + + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1.8vd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3vd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + usb_vbus: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&pio 20 GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; + + en8811_a: regulator-phy1 { + compatible = "regulator-fixed"; + regulator-name = "phy1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 16 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + en8811_b: regulator-phy2 { + compatible = "regulator-fixed"; + regulator-name = "phy2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 17 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset-key { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + }; + +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_active_high>; + }; + + map1 { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active_med>; + }; + + map2 { + /* active: set fan to cooling level 0 */ + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_active_low>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + phy-handle = <&phy0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy1>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; +}; + + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + + /* MAC Address EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-width = <8>; + pagesize = <8>; + size = <256>; + }; +}; + +&mdio { + phy0: ethernet-phy@14 { + reg = <14>; + interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + phy-mode = "2500base-x"; + full-duplex; + pause; + airoha,pnswap-rx; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { /* en8811_a_gpio5 */ + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + default-state = "keep"; + }; + led@1 { /* en8811_a_gpio4 */ + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + default-state = "keep"; + }; + }; + }; + + phy1: ethernet-phy@15 { + reg = <15>; + interrupts-extended = <&pio 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + phy-mode = "2500base-x"; + full-duplex; + pause; + airoha,pnswap-rx; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { /* en8811_b_gpio5 */ + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_WAN; + function-enumerator = <1>; + default-state = "keep"; + }; + led@1 { /* en8811_b_gpio4 */ + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + function-enumerator = <2>; + default-state = "keep"; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pio { + i2c_pins: i2c-pins { + mux { + function = "i2c"; + groups = "i2c"; + }; + }; + + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + spi_flash_pins: spi-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + + usb_ngff_pins: usb-ngff-pins { + ngff-gnss-off-conf { + pins = "GPIO_6"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + ngff-pe-rst-conf { + pins = "GPIO_7"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + ngff-wwan-off-conf { + pins = "GPIO_8"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + ngff-pwr-off-conf { + pins = "GPIO_9"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + ngff-rst-conf { + pins = "GPIO_10"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + ngff-coex-conf { + pins = "SPI1_CS"; + drive-strength = <8>; + mediatek,pull-up-adv = <1>; + }; + }; + + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_led_pins: wf-led-pins { + mux { + function = "led"; + groups = "wifi_led"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&ssusb { + pinctrl-names = "default"; + pinctrl-0 = <&usb_ngff_pins>; + vusb33-supply = <®_3p3v>; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; + pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; + + led { + led-active-low; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso index 7b97c5c91bd0..24398f8a7da4 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso @@ -9,46 +9,44 @@ / { compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; +}; + +&{/soc/spi@1100a000} { + #address-cells = <1>; + #size-cells = <0>; + + spi_nand: flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <10000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; - fragment@0 { - target-path = "/soc/spi@1100a000"; - __overlay__ { + partitions { + compatible = "fixed-partitions"; #address-cells = <1>; - #size-cells = <0>; - spi_nand: flash@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <10000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "reserved"; - reg = <0x100000 0x280000>; - }; - - partition@380000 { - label = "fip"; - reg = <0x380000 0x200000>; - read-only; - }; - - partition@580000 { - label = "ubi"; - reg = <0x580000 0x7a80000>; - }; - }; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "reserved"; + reg = <0x100000 0x280000>; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso index e48881be4ed6..6a0d529b54ac 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso @@ -9,54 +9,52 @@ / { compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; +}; + +&{/soc/spi@1100a000} { + #address-cells = <1>; + #size-cells = <0>; - fragment@0 { - target-path = "/soc/spi@1100a000"; - __overlay__ { + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; #address-cells = <1>; - #size-cells = <0>; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x40000>; - }; - - partition@80000 { - label = "reserved2"; - reg = <0x80000 0x80000>; - }; - - partition@100000 { - label = "fip"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "recovery"; - reg = <0x180000 0xa80000>; - }; - - partition@c00000 { - label = "fit"; - reg = <0xc00000 0x1400000>; - }; - }; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x40000>; + }; + + partition@80000 { + label = "reserved2"; + reg = <0x80000 0x80000>; + }; + + partition@100000 { + label = "fip"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "recovery"; + reg = <0x180000 0xa80000>; + }; + + partition@c00000 { + label = "fit"; + reg = <0xc00000 0x1400000>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso index f623bce075ce..d9e01967acc4 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso @@ -9,15 +9,11 @@ / { compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; - - fragment@0 { - target-path = "/soc/mmc@11230000"; - __overlay__ { - bus-width = <4>; - max-frequency = <52000000>; - cap-sd-highspeed; - status = "okay"; - }; - }; }; +&{/soc/mmc@11230000} { + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index bba97de4fb44..aa728331e876 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT +#include <dt-bindings/clock/mediatek,mt7988-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> / { compatible = "mediatek,mt7988a"; @@ -78,7 +80,7 @@ #interrupt-cells = <3>; }; - clock-controller@10001000 { + infracfg: clock-controller@10001000 { compatible = "mediatek,mt7988-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; @@ -103,6 +105,92 @@ #clock-cells = <1>; }; + pwm@10048000 { + compatible = "mediatek,mt7988-pwm"; + reg = <0 0x10048000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>, + <&infracfg CLK_INFRA_66M_PWM_HCK>, + <&infracfg CLK_INFRA_66M_PWM_CK1>, + <&infracfg CLK_INFRA_66M_PWM_CK2>, + <&infracfg CLK_INFRA_66M_PWM_CK3>, + <&infracfg CLK_INFRA_66M_PWM_CK4>, + <&infracfg CLK_INFRA_66M_PWM_CK5>, + <&infracfg CLK_INFRA_66M_PWM_CK6>, + <&infracfg CLK_INFRA_66M_PWM_CK7>, + <&infracfg CLK_INFRA_66M_PWM_CK8>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4", "pwm5", "pwm6", "pwm7", "pwm8"; + #pwm-cells = <2>; + status = "disabled"; + }; + + i2c@11003000 { + compatible = "mediatek,mt7981-i2c"; + reg = <0 0x11003000 0 0x1000>, + <0 0x10217080 0 0x80>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_I2C_BCK>, + <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@11004000 { + compatible = "mediatek,mt7981-i2c"; + reg = <0 0x11004000 0 0x1000>, + <0 0x10217100 0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_I2C_BCK>, + <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@11005000 { + compatible = "mediatek,mt7981-i2c"; + reg = <0 0x11005000 0 0x1000>, + <0 0x10217180 0 0x80>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_I2C_BCK>, + <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb@11190000 { + compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11190000 0 0x2e00>, + <0 0x11193e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_USB_SYS>, + <&infracfg CLK_INFRA_USB_REF>, + <&infracfg CLK_INFRA_66M_USB_HCK>, + <&infracfg CLK_INFRA_133M_USB_HCK>, + <&infracfg CLK_INFRA_USB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; + }; + + usb@11200000 { + compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>, + <&infracfg CLK_INFRA_USB_CK_P1>, + <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>, + <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>, + <&infracfg CLK_INFRA_USB_XHCI_CK_P1>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; + }; + clock-controller@11f40000 { compatible = "mediatek,mt7988-xfi-pll"; reg = <0 0x11f40000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi index 90cbbc18a483..8d1cbc92bce3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -27,6 +27,15 @@ hid-descr-addr = <0x0020>; interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; + + /* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */ + touchscreen@40 { + compatible = "hid-over-i2c"; + reg = <0x40>; + hid-descr-addr = <0x0001>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 6d962d437e02..b4d85147b77b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -1134,12 +1134,6 @@ rtc: mt6397rtc { compatible = "mediatek,mt6397-rtc"; }; - - syscfg_pctl_pmic: syscon@c000 { - compatible = "mediatek,mt6397-pctl-pmic-syscfg", - "syscon"; - reg = <0 0x0000c000 0 0x0108>; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 3fab21f59d18..bb4671c18e3b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -213,14 +213,14 @@ <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins_clk { pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; bias-pull-down; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; }; pins_insert { @@ -241,13 +241,13 @@ <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins_clk { pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; }; @@ -265,13 +265,13 @@ <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins_clk { pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 681deddffc2a..f04baea5d6cb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -160,7 +160,6 @@ pinmux = <PINMUX_GPIO82__FUNC_SDA0>, <PINMUX_GPIO83__FUNC_SCL0>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -169,7 +168,6 @@ pinmux = <PINMUX_GPIO81__FUNC_SDA1>, <PINMUX_GPIO84__FUNC_SCL1>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -178,7 +176,6 @@ pinmux = <PINMUX_GPIO103__FUNC_SCL2>, <PINMUX_GPIO104__FUNC_SDA2>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -187,7 +184,6 @@ pinmux = <PINMUX_GPIO50__FUNC_SCL3>, <PINMUX_GPIO51__FUNC_SDA3>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -196,7 +192,6 @@ pinmux = <PINMUX_GPIO105__FUNC_SCL4>, <PINMUX_GPIO106__FUNC_SDA4>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -205,7 +200,6 @@ pinmux = <PINMUX_GPIO48__FUNC_SCL5>, <PINMUX_GPIO49__FUNC_SDA5>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi index 8b57706ac814..586eee79c73c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi @@ -27,7 +27,7 @@ dlg,btn-cfg = <50>; dlg,mic-det-thr = <500>; dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-det-rate = "32_64"; dlg,jack-rem-deb = <1>; dlg,a-d-btn-thr = <0xa>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts index 072133fb0f01..f34964afe39b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts @@ -9,6 +9,7 @@ / { model = "Google cozmo board"; + chassis-type = "laptop"; compatible = "google,cozmo", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts index b595622e7bee..72852b760038 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts @@ -9,6 +9,7 @@ / { model = "Google fennel sku1 board"; + chassis-type = "convertible"; compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183"; pwmleds { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts index 5a1c39318a6c..757d0afd14fb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts @@ -9,6 +9,7 @@ / { model = "Google fennel sku6 board"; + chassis-type = "convertible"; compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts index 3ea4fdb40118..6641b087e7c5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts @@ -9,6 +9,7 @@ / { model = "Google fennel sku7 board"; + chassis-type = "convertible"; compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts index 3fc5a6181d7e..877256eab262 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts @@ -9,6 +9,7 @@ / { model = "Google fennel14 sku2 board"; + chassis-type = "laptop"; compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts index 23ad0b91e977..b981dd31a430 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts @@ -9,6 +9,7 @@ / { model = "Google fennel14 sku0 board"; + chassis-type = "laptop"; compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts index e5bd9191e426..f3ac9c074226 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts @@ -9,6 +9,7 @@ / { model = "Google kappa board"; + chassis-type = "laptop"; compatible = "google,kappa", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts index 8fa89db03e63..e8241587949b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts @@ -9,5 +9,6 @@ / { model = "Google kenzo sku17 board"; + chassis-type = "laptop"; compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts index 4eb2a0d571af..ddb993521bbf 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts @@ -19,6 +19,6 @@ &mmc1_pins_uhs { pins-clk { - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts index 6a733361e8ae..10c4f920a7d8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts @@ -19,6 +19,6 @@ &mmc1_pins_uhs { pins-clk { - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts index 6a7ae616512d..cce326aec1aa 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts @@ -17,7 +17,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_pins_wakeup>; - wobt { + event-wobt { label = "Wake on BT"; gpios = <&pio 42 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -47,10 +47,8 @@ }; }; -&wifi_wakeup { - wowlan { - gpios = <&pio 113 GPIO_ACTIVE_LOW>; - }; +&wifi_wakeup_event { + gpios = <&pio 113 GPIO_ACTIVE_LOW>; }; &wifi_pwrseq { @@ -68,16 +66,16 @@ &mmc1_pins_default { pins-cmd-dat { - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; pins-clk { - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; &mmc1_pins_uhs { pins-clk { - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts index 89208b843b27..928b205a616a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts @@ -9,6 +9,7 @@ / { model = "Google willow board sku0"; + chassis-type = "laptop"; compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts index c7b20441d053..71307a8052d6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts @@ -9,5 +9,6 @@ / { model = "Google willow board sku1"; + chassis-type = "laptop"; compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 7592e3b86037..fa4ab4d2899f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -155,21 +155,24 @@ vdd18-supply = <&pp1800_mipibrdg>; vdd33-supply = <&vddio_mipibrdg>; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - anx7625_in: endpoint { - remote-endpoint = <&dsi_out>; + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - anx7625_out: endpoint { - remote-endpoint = <&panel_in>; + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts index 7739358008ee..5a416143b4a0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts @@ -12,6 +12,7 @@ / { model = "MediaTek kodama sku32 board"; + chassis-type = "tablet"; compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 100191c6453b..6345e969efae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -152,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wifi_pins_wakeup>; - button-wowlan { + wifi_wakeup_event: event-wowlan { label = "Wake on WiFi"; gpios = <&pio 113 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -488,7 +488,7 @@ <PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>, <PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>, <PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/ - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; @@ -502,7 +502,7 @@ <PINMUX_GPIO10__FUNC_GPIO10>; input-enable; bias-pull-down; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; }; }; @@ -533,7 +533,6 @@ pinmux = <PINMUX_GPIO82__FUNC_SDA0>, <PINMUX_GPIO83__FUNC_SCL0>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -542,7 +541,6 @@ pinmux = <PINMUX_GPIO81__FUNC_SDA1>, <PINMUX_GPIO84__FUNC_SCL1>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -551,7 +549,6 @@ pinmux = <PINMUX_GPIO103__FUNC_SCL2>, <PINMUX_GPIO104__FUNC_SDA2>; bias-disable; - mediatek,drive-strength-adv = <00>; }; }; @@ -560,7 +557,6 @@ pinmux = <PINMUX_GPIO50__FUNC_SCL3>, <PINMUX_GPIO51__FUNC_SDA3>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -569,7 +565,6 @@ pinmux = <PINMUX_GPIO105__FUNC_SCL4>, <PINMUX_GPIO106__FUNC_SDA4>; bias-disable; - mediatek,drive-strength-adv = <00>; }; }; @@ -578,7 +573,6 @@ pinmux = <PINMUX_GPIO48__FUNC_SCL5>, <PINMUX_GPIO49__FUNC_SDA5>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -679,14 +673,14 @@ <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; input-enable; mediatek,pull-up-adv = <10>; }; pins-clk { pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; mediatek,pull-down-adv = <10>; input-enable; }; @@ -803,7 +797,6 @@ }; pins-rts { pinmux = <PINMUX_GPIO47__FUNC_URTS1>; - output-enable; }; pins-cts { pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; @@ -822,7 +815,6 @@ }; pins-rts { pinmux = <PINMUX_GPIO47__FUNC_URTS1>; - output-enable; }; pins-cts { pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index 333c516af490..1aa668c3ccf9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -197,7 +197,6 @@ pinmux = <PINMUX_GPIO82__FUNC_SDA0>, <PINMUX_GPIO83__FUNC_SCL0>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -206,7 +205,6 @@ pinmux = <PINMUX_GPIO81__FUNC_SDA1>, <PINMUX_GPIO84__FUNC_SCL1>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -215,7 +213,6 @@ pinmux = <PINMUX_GPIO103__FUNC_SCL2>, <PINMUX_GPIO104__FUNC_SDA2>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -224,7 +221,6 @@ pinmux = <PINMUX_GPIO50__FUNC_SCL3>, <PINMUX_GPIO51__FUNC_SDA3>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -233,7 +229,6 @@ pinmux = <PINMUX_GPIO105__FUNC_SCL4>, <PINMUX_GPIO106__FUNC_SDA4>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -242,7 +237,6 @@ pinmux = <PINMUX_GPIO48__FUNC_SCL5>, <PINMUX_GPIO49__FUNC_SDA5>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <00>; }; }; @@ -356,14 +350,14 @@ <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; input-enable; mediatek,pull-up-adv = <10>; }; pins_clk { pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; mediatek,pull-down-adv = <10>; input-enable; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 774ae5d9143f..fbf145639b8c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1183,7 +1183,7 @@ status = "disabled"; }; - thermal: thermal@1100b000 { + thermal: thermal-sensor@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; reg = <0 0x1100b000 0 0xc00>; @@ -2090,61 +2090,129 @@ }; }; - /* The tzts1 ~ tzts6 don't need to polling */ - /* The tzts1 ~ tzts6 don't need to thermal throttle */ - - tzts1: tzts1 { - polling-delay-passive = <0>; - polling-delay = <0>; + tzts1: soc-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 1>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + trips { + soc_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - tzts2: tzts2 { - polling-delay-passive = <0>; - polling-delay = <0>; + tzts2: gpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 2>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + + trips { + gpu_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - tzts3: tzts3 { - polling-delay-passive = <0>; - polling-delay = <0>; + tzts3: md1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 3>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + + trips { + md1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - tzts4: tzts4 { - polling-delay-passive = <0>; - polling-delay = <0>; + tzts4: cpu-little-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 4>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + + trips { + cpul_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpul_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - tzts5: tzts5 { - polling-delay-passive = <0>; - polling-delay = <0>; + tzts5: cpu-big-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 5>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + + trips { + cpub_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpub_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - tztsABB: tztsABB { - polling-delay-passive = <0>; - polling-delay = <0>; + tztsABB: tsabb-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; thermal-sensors = <&thermal 6>; sustainable-power = <5000>; - trips {}; - cooling-maps {}; + + trips { + tsabb_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + tsabb_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts new file mode 100644 index 000000000000..d16834eec87a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-voltorb.dtsi" + +/ { + model = "Google Voltorb sku589824 board"; + compatible = "google,voltorb-sku589824", "google,voltorb", + "mediatek,mt8186"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts new file mode 100644 index 000000000000..45e57f7706cc --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-voltorb.dtsi" + +/ { + model = "Google Voltorb sku589825 board"; + compatible = "google,voltorb-sku589825", "google,voltorb", + "mediatek,mt8186"; +}; + +&i2c1 { + touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi new file mode 100644 index 000000000000..52ec58128d56 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/spmi/spmi.h> + +#include "mt8186-corsola-steelix.dtsi" + +/ { + chassis-type = "laptop"; + + max98360a: max98360a { + compatible = "maxim,max98360a"; + sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; +}; + +&cpu6 { + proc-supply = <&mt6319_buck1>; +}; + +&cpu7 { + proc-supply = <&mt6319_buck1>; +}; + +&gpio_keys { + status = "disabled"; +}; + +&keyboard_controller { + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&mt6366_vproc11_reg { + status = "disabled"; +}; + +&cluster1_opp_14 { + opp-hz = /bits/ 64 <2050000000>; + opp-microvolt = <1118750>; +}; + +&cluster1_opp_15 { + opp-hz = /bits/ 64 <2200000000>; +}; + +&rt1019p{ + status = "disabled"; +}; + +&sound { + compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound"; + status = "okay"; + + spk-hdmi-playback-dai-link { + codec { + sound-dai = <&it6505dptx>, <&max98360a>; + }; + }; +}; + +&spmi { + pinctrl-names = "default"; + pinctrl-0 = <&spmi_pins>; + #address-cells = <2>; + #size-cells = <0>; + status = "okay"; + + pmic@6 { + compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6319_buck1: vbuck1 { + regulator-name = "ppvar_dvdd_proc_bc_mt6319"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi index 1807e9d6cb0e..afdab5724eaa 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -42,7 +42,7 @@ default-brightness-level = <576>; }; - bt-sco-codec { + bt-sco { compatible = "linux,bt-sco"; #sound-dai-cells = <0>; }; @@ -223,12 +223,44 @@ mediatek,adsp = <&adsp>; mediatek,platform = <&afe>; - playback-codecs { - sound-dai = <&it6505dptx>, <&rt1019p>; + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Speakers", "Speaker", + "HDMI1", "TX"; + + hs-playback-dai-link { + link-name = "I2S0"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682s 0>; + }; + }; + + hs-capture-dai-link { + link-name = "I2S1"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682s 0>; + }; }; - headset-codec { - sound-dai = <&rt5682s 0>; + spk-share-dai-link { + link-name = "I2S2"; + mediatek,clk-provider = "cpu"; + }; + + spk-hdmi-playback-dai-link { + link-name = "I2S3"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + /* RT1019P and IT6505 connected to the same I2S line */ + codec { + sound-dai = <&it6505dptx>, <&rt1019p>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi index b4315c9214dc..29d012d28edb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/mediatek,mt8188-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mailbox/mediatek,mt8188-gce.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> #include <dt-bindings/power/mediatek,mt8188-power.h> @@ -293,6 +294,112 @@ clock-output-names = "clk32k"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-microvolt = <575000>; + opp-supported-hw = <0xff>; + }; + opp-431000000 { + opp-hz = /bits/ 64 <431000000>; + opp-microvolt = <587500>; + opp-supported-hw = <0xff>; + }; + opp-473000000 { + opp-hz = /bits/ 64 <473000000>; + opp-microvolt = <600000>; + opp-supported-hw = <0xff>; + }; + opp-515000000 { + opp-hz = /bits/ 64 <515000000>; + opp-microvolt = <612500>; + opp-supported-hw = <0xff>; + }; + opp-556000000 { + opp-hz = /bits/ 64 <556000000>; + opp-microvolt = <625000>; + opp-supported-hw = <0xff>; + }; + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <637500>; + opp-supported-hw = <0xff>; + }; + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-microvolt = <650000>; + opp-supported-hw = <0xff>; + }; + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-microvolt = <662500>; + opp-supported-hw = <0xff>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <675000>; + opp-supported-hw = <0xff>; + }; + opp-730000000 { + opp-hz = /bits/ 64 <730000000>; + opp-microvolt = <687500>; + opp-supported-hw = <0xff>; + }; + opp-760000000 { + opp-hz = /bits/ 64 <760000000>; + opp-microvolt = <700000>; + opp-supported-hw = <0xff>; + }; + opp-790000000 { + opp-hz = /bits/ 64 <790000000>; + opp-microvolt = <712500>; + opp-supported-hw = <0xff>; + }; + opp-835000000 { + opp-hz = /bits/ 64 <835000000>; + opp-microvolt = <731250>; + opp-supported-hw = <0xff>; + }; + opp-880000000 { + opp-hz = /bits/ 64 <880000000>; + opp-microvolt = <750000>; + opp-supported-hw = <0xff>; + }; + opp-915000000 { + opp-hz = /bits/ 64 <915000000>; + opp-microvolt = <775000>; + opp-supported-hw = <0x8f>; + }; + opp-915000000-5 { + opp-hz = /bits/ 64 <915000000>; + opp-microvolt = <762500>; + opp-supported-hw = <0x30>; + }; + opp-915000000-6 { + opp-hz = /bits/ 64 <915000000>; + opp-microvolt = <750000>; + opp-supported-hw = <0x70>; + }; + opp-950000000 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <800000>; + opp-supported-hw = <0x8f>; + }; + opp-950000000-5 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <775000>; + opp-supported-hw = <0x30>; + }; + opp-950000000-6 { + opp-hz = /bits/ 64 <950000000>; + opp-microvolt = <750000>; + opp-supported-hw = <0x70>; + }; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; @@ -383,6 +490,329 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8188-scpsys", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8188-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + mfg0: power-domain@MT8188_POWER_DOMAIN_MFG0 { + reg = <MT8188_POWER_DOMAIN_MFG0>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_MFG1 { + reg = <MT8188_POWER_DOMAIN_MFG1>; + clocks = <&topckgen CLK_APMIXED_MFGPLL>, + <&topckgen CLK_TOP_MFG_CORE_TMP>; + clock-names = "mfg", "alt"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_MFG2 { + reg = <MT8188_POWER_DOMAIN_MFG2>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_MFG3 { + reg = <MT8188_POWER_DOMAIN_MFG3>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_MFG4 { + reg = <MT8188_POWER_DOMAIN_MFG4>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8188_POWER_DOMAIN_VPPSYS0 { + reg = <MT8188_POWER_DOMAIN_VPPSYS0>; + clocks = <&topckgen CLK_TOP_VPP>, + <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_CCU>, + <&topckgen CLK_TOP_IMG>, + <&topckgen CLK_TOP_VENC>, + <&topckgen CLK_TOP_VDEC>, + <&topckgen CLK_TOP_WPE_VPP>, + <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP0>, + <&topckgen CLK_TOP_CFGREG_F26M_VPP0>, + <&vppsys0 CLK_VPP0_SMI_COMMON_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_INFRA_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_CAMSYS_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5_MMSRAM>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6_MMSRAM>, + <&vppsys0 CLK_VPP0_SMI_REORDER_MMSRAM>, + <&vppsys0 CLK_VPP0_SMI_IOMMU>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>, + <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>, + <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>, + <&vppsys0 CLK_VPP0_SMI_RSI>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPESYS>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "top", "cam", "ccu", "img", "venc", + "vdec", "wpe", "cfgck", "cfgxo", + "ss-sram-cmn", "ss-sram-v0l0", "ss-sram-v0l1", + "ss-sram-ve0", "ss-sram-ve1", "ss-sram-ifa", + "ss-sram-cam", "ss-sram-v1l5", "ss-sram-v1l6", + "ss-sram-rdr", "ss-iommu", "ss-imgcam", + "ss-emi", "ss-subcmn-rdr", "ss-rsi", + "ss-cmn-l4", "ss-vdec1", "ss-wpe", + "ss-cvdo-ve1"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_VDOSYS0 { + reg = <MT8188_POWER_DOMAIN_VDOSYS0>; + clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO0>, + <&topckgen CLK_TOP_CFGREG_F26M_VDO0>, + <&vdosys0 CLK_VDO0_SMI_GALS>, + <&vdosys0 CLK_VDO0_SMI_COMMON>, + <&vdosys0 CLK_VDO0_SMI_EMI>, + <&vdosys0 CLK_VDO0_SMI_IOMMU>, + <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vdosys0 CLK_VDO0_SMI_RSI>, + <&vdosys0 CLK_VDO0_APB_BUS>; + clock-names = "cfgck", "cfgxo", "ss-gals", + "ss-cmn", "ss-emi", "ss-iommu", + "ss-larb", "ss-rsi", "ss-bus"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_VPPSYS1 { + reg = <MT8188_POWER_DOMAIN_VPPSYS1>; + clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP1>, + <&topckgen CLK_TOP_CFGREG_F26M_VPP1>, + <&vppsys1 CLK_VPP1_GALS5>, + <&vppsys1 CLK_VPP1_GALS6>, + <&vppsys1 CLK_VPP1_LARB5>, + <&vppsys1 CLK_VPP1_LARB6>; + clock-names = "cfgck", "cfgxo", + "ss-vpp1-g5", "ss-vpp1-g6", + "ss-vpp1-l5", "ss-vpp1-l6"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_VDEC1 { + reg = <MT8188_POWER_DOMAIN_VDEC1>; + clocks = <&vdecsys CLK_VDEC2_LARB1>; + clock-names = "ss-vdec"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_VDEC0 { + reg = <MT8188_POWER_DOMAIN_VDEC0>; + clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>; + clock-names = "ss-vdec"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE { + reg = <MT8188_POWER_DOMAIN_CAM_VCORE>; + clocks = <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_CCU>, + <&topckgen CLK_TOP_CCU_AHB>, + <&topckgen CLK_TOP_CFGREG_CLOCK_ISP_AXI_GALS>; + clock-names = "cam", "ccu", "bus", "cfgck"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_CAM_MAIN { + reg = <MT8188_POWER_DOMAIN_CAM_MAIN>; + clocks = <&camsys CLK_CAM_MAIN_LARB13>, + <&camsys CLK_CAM_MAIN_LARB14>, + <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>, + <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>, + <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>; + clock-names= "ss-cam-l13", "ss-cam-l14", + "ss-cam-mm0", "ss-cam-mm1", + "ss-camsys"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_CAM_SUBB { + reg = <MT8188_POWER_DOMAIN_CAM_SUBB>; + clocks = <&camsys CLK_CAM_MAIN_CAM_SUBB>, + <&camsys_rawb CLK_CAM_RAWB_LARBX>, + <&camsys_yuvb CLK_CAM_YUVB_LARBX>; + clock-names = "ss-camb-sub", + "ss-camb-raw", + "ss-camb-yuv"; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_CAM_SUBA { + reg =<MT8188_POWER_DOMAIN_CAM_SUBA>; + clocks = <&camsys CLK_CAM_MAIN_CAM_SUBA>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>, + <&camsys_yuva CLK_CAM_YUVA_LARBX>; + clock-names = "ss-cama-sub", + "ss-cama-raw", + "ss-cama-yuv"; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8188_POWER_DOMAIN_VDOSYS1 { + reg = <MT8188_POWER_DOMAIN_VDOSYS1>; + clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO1>, + <&topckgen CLK_TOP_CFGREG_F26M_VDO1>, + <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_SMI_LARB3>, + <&vdosys1 CLK_VDO1_GALS>; + clock-names = "cfgck", "cfgxo", "ss-larb2", + "ss-larb3", "ss-gals"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_HDMI_TX { + reg = <MT8188_POWER_DOMAIN_HDMI_TX>; + clocks = <&topckgen CLK_TOP_HDMI_APB>, + <&topckgen CLK_TOP_HDCP_24M>; + clock-names = "bus", "hdcp"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_DP_TX { + reg = <MT8188_POWER_DOMAIN_DP_TX>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_EDP_TX { + reg = <MT8188_POWER_DOMAIN_EDP_TX>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8188_POWER_DOMAIN_VENC { + reg = <MT8188_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC1_LARB>, + <&vencsys CLK_VENC1_VENC>, + <&vencsys CLK_VENC1_GALS>, + <&vencsys CLK_VENC1_GALS_SRAM>; + clock-names = "ss-ve1-larb", "ss-ve1-core", + "ss-ve1-gals", "ss-ve1-sram"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_WPE { + reg = <MT8188_POWER_DOMAIN_WPE>; + clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>, + <&wpesys CLK_WPE_TOP_SMI_LARB7_PCLK_EN>; + clock-names = "ss-wpe-l7", "ss-wpe-l7pce"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8188_POWER_DOMAIN_PEXTP_MAC_P0 { + reg = <MT8188_POWER_DOMAIN_PEXTP_MAC_P0>; + mediatek,infracfg = <&infracfg_ao>; + clocks = <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>; + clock-names = "ss-pextp-fmem"; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_CSIRX_TOP { + reg = <MT8188_POWER_DOMAIN_CSIRX_TOP>; + clocks = <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF1>; + clock-names = "seninf0", "seninf1"; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_PEXTP_PHY_TOP { + reg = <MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_ADSP_AO { + reg = <MT8188_POWER_DOMAIN_ADSP_AO>; + clocks = <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&topckgen CLK_TOP_ADSP>; + clock-names = "bus", "main"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_ADSP_INFRA { + reg = <MT8188_POWER_DOMAIN_ADSP_INFRA>; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8188_POWER_DOMAIN_AUDIO_ASRC { + reg = <MT8188_POWER_DOMAIN_AUDIO_ASRC>; + clocks = <&topckgen CLK_TOP_ASM_H>; + clock-names = "asm"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_AUDIO { + reg = <MT8188_POWER_DOMAIN_AUDIO>; + clocks = <&topckgen CLK_TOP_A1SYS_HP>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>; + clock-names = "a1sys", "intbus", "adspck"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8188_POWER_DOMAIN_ADSP { + reg = <MT8188_POWER_DOMAIN_ADSP>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8188_POWER_DOMAIN_ETHER { + reg = <MT8188_POWER_DOMAIN_ETHER>; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; + clock-names = "ethermac"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt8188-wdt"; reg = <0 0x10007000 0 0x100>; @@ -413,6 +843,22 @@ clock-names = "spi", "wrap"; }; + gce0: mailbox@10320000 { + compatible = "mediatek,mt8188-gce"; + reg = <0 0x10320000 0 0x4000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE>; + }; + + gce1: mailbox@10330000 { + compatible = "mediatek,mt8188-gce"; + reg = <0 0x10330000 0 0x4000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>; + }; + scp: scp@10500000 { compatible = "mediatek,mt8188-scp"; reg = <0 0x10500000 0 0x100000>, @@ -827,6 +1273,23 @@ #clock-cells = <1>; }; + gpu: gpu@13000000 { + compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm"; + reg = <0 0x13000000 0 0x4000>; + + clocks = <&mfgcfg CLK_MFGCFG_BG3D>; + interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>, + <&spm MT8188_POWER_DOMAIN_MFG3>, + <&spm MT8188_POWER_DOMAIN_MFG4>; + power-domain-names = "core0", "core1", "core2"; + status = "disabled"; + }; + mfgcfg: clock-controller@13fbf000 { compatible = "mediatek,mt8188-mfgcfg"; reg = <0 0x13fbf000 0 0x1000>; @@ -952,5 +1415,22 @@ reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + + vdosys0: syscon@1c01d000 { + compatible = "mediatek,mt8188-vdosys0", "syscon"; + reg = <0 0x1c01d000 0 0x1000>; + #clock-cells = <1>; + mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>; + }; + + vdosys1: syscon@1c100000 { + compatible = "mediatek,mt8188-vdosys1", "syscon"; + reg = <0 0x1c100000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + mboxes = <&gce0 1 CMDQ_THR_PRIO_4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0 0x1000>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts index fd2cb8765a15..ac2673e56fb8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -7,6 +7,7 @@ / { model = "Google Hayato rev1"; + chassis-type = "convertible"; compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts index 3127ee5f6172..cd86ad9ba28a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts @@ -7,6 +7,7 @@ / { model = "Google Hayato rev5"; + chassis-type = "convertible"; compatible = "google,hayato-rev5-sku2", "google,hayato-sku2", "google,hayato", "mediatek,mt8192"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts index bc88866ab2f5..29aa87e93888 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -8,6 +8,7 @@ / { model = "Google Spherion (rev0 - 3)"; + chassis-type = "laptop"; compatible = "google,spherion-rev3", "google,spherion-rev2", "google,spherion-rev1", "google,spherion-rev0", "google,spherion", "mediatek,mt8192"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts index 0039158c9e60..5e9e598bab90 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts @@ -8,6 +8,7 @@ / { model = "Google Spherion (rev4)"; + chassis-type = "laptop"; compatible = "google,spherion-rev4", "google,spherion", "mediatek,mt8192"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 7a704246678f..08d71ddf3668 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -147,6 +147,7 @@ regulator-boot-on; gpio = <&pio 127 GPIO_ACTIVE_HIGH>; vin-supply = <&pp3300_g>; + off-on-delay-us = <500000>; }; /* separately switched 3.3V power rail */ diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 84cbdf6e9eb0..47dea10dd3b8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -2234,7 +2234,7 @@ }; }; - gpu0-thermal { + gpu-thermal { polling-delay = <1000>; polling-delay-passive = <250>; thermal-sensors = <&lvts_ap MT8192_AP_GPU0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts new file mode 100644 index 000000000000..88123842c818 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "HP Dojo (sku 1, 3, 5, 7) board"; + chassis-type = "convertible"; + compatible = "google,dojo-sku7", "google,dojo-sku5", + "google,dojo-sku3", "google,dojo-sku1", + "google,dojo", "mediatek,mt8195"; +}; + +&audio_codec { + compatible = "realtek,rt5682s"; + realtek,amic-delay-ms = <250>; +}; + +&i2c2 { + spk_r_amp: amplifier@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + reset-gpios = <&pio 100 GPIO_ACTIVE_LOW>; + sound-name-prefix = "Right"; + #sound-dai-cells = <0>; + }; + + spk_l_amp: amplifier@39 { + compatible = "maxim,max98390"; + reg = <0x39>; + sound-name-prefix = "Left"; + #sound-dai-cells = <0>; + }; +}; + +&i2c4 { + touchscreen@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x0001>; + interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + post-power-on-delay-ms = <10>; + vdd-supply = <&pp3300_s3>; + }; +}; + +&keyboard_controller { + linux,keymap = < + CROS_STD_MAIN_KEYMAP + + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_KBDILLUMTOGGLE) + MATRIX_KEY(0x01, 0x09, KEY_PLAYPAUSE) + MATRIX_KEY(0x00, 0x04, KEY_MICMUTE) + MATRIX_KEY(0x00, 0x01, KEY_MUTE) + MATRIX_KEY(0x01, 0x05, KEY_VOLUMEDOWN) + MATRIX_KEY(0x03, 0x05, KEY_VOLUMEUP) + >; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins_default>; + status = "okay"; +}; + +&pciephy { + status = "okay"; +}; + +&pio_default { + pins-low-power-hdmi-disable { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, + <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down; + }; +}; + +&sound { + compatible = "mediatek,mt8195_mt6359_max98390_rt5682"; + model = "m8195_m98390_5682s"; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Right Spk", "Right BE_OUT", + "Left Spk", "Left BE_OUT"; + + spk-playback-dai-link { + codec { + sound-dai = <&spk_r_amp>, <&spk_l_amp>; + }; + }; +}; + +&spk_amplifier { + /* Disable RT1019P, not present on Dojo */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 4a11918da370..fe5400e17b0f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -240,6 +240,7 @@ spk_amplifier: rt1019p { compatible = "realtek,rt1019p"; label = "rt1019p"; + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&rt1019p_pins_default>; sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>; @@ -366,6 +367,7 @@ &dp_tx { status = "okay"; + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&dptx_pin>; @@ -436,6 +438,7 @@ /* Realtek RT5682i or RT5682s, sharing the same configuration */ reg = <0x1a>; interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>; + #sound-dai-cells = <0>; realtek,jd-src = <1>; AVDD-supply = <&mt6359_vio18_ldo_reg>; @@ -1162,6 +1165,48 @@ "AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5"; pinctrl-names = "default"; pinctrl-0 = <&aud_pins_default>; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Ext Spk", "Speaker"; + + mm-dai-link { + link-name = "ETDM1_IN_BE"; + mediatek,clk-provider = "cpu"; + }; + + hs-playback-dai-link { + link-name = "ETDM1_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&audio_codec>; + }; + }; + + hs-capture-dai-link { + link-name = "ETDM2_IN_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&audio_codec>; + }; + }; + + spk-playback-dai-link { + link-name = "ETDM2_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&spk_amplifier>; + }; + }; + + displayport-dai-link { + link-name = "DPTX_BE"; + codec { + sound-dai = <&dp_tx>; + }; + }; }; &spi0 { @@ -1389,6 +1434,11 @@ MATRIX_KEY(0x02, 0x09, 0) /* T8 */ MATRIX_KEY(0x01, 0x09, 0) /* T9 */ MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + + /* T11 to T13 are present only on Dojo */ + MATRIX_KEY(0x00, 0x01, 0) /* T11 */ + MATRIX_KEY(0x01, 0x05, 0) /* T12 */ + MATRIX_KEY(0x03, 0x05, 0) /* T13 */ >; linux,keymap = < diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index b82f7176b4a1..31d424b8fc7c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -305,14 +305,14 @@ <PINMUX_GPIO78__FUNC_GBE_TXD2>, <PINMUX_GPIO79__FUNC_GBE_TXD1>, <PINMUX_GPIO80__FUNC_GBE_TXD0>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; }; pins-cc { pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, <PINMUX_GPIO88__FUNC_GBE_TXEN>, <PINMUX_GPIO87__FUNC_GBE_RXDV>, <PINMUX_GPIO86__FUNC_GBE_RXC>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; }; pins-rxd { pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, @@ -377,7 +377,7 @@ mmc0_default_pins: mmc0-default-pins { pins-clk { pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -392,13 +392,13 @@ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, <PINMUX_GPIO121__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-rst { pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -406,7 +406,7 @@ mmc0_uhs_pins: mmc0-uhs-pins { pins-clk { pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -421,19 +421,19 @@ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, <PINMUX_GPIO121__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-ds { pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; pins-rst { pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -441,7 +441,7 @@ mmc1_default_pins: mmc1-default-pins { pins-clk { pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -452,7 +452,7 @@ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; @@ -465,7 +465,7 @@ mmc1_uhs_pins: mmc1-uhs-pins { pins-clk { pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -476,7 +476,7 @@ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts index 341b6e074139..83456d649ff7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts @@ -74,7 +74,6 @@ pinmux = <PINMUX_GPIO8__FUNC_SDA0>, <PINMUX_GPIO9__FUNC_SCL0>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - mediatek,drive-strength-adv = <0>; drive-strength = <6>; }; }; @@ -84,7 +83,6 @@ pinmux = <PINMUX_GPIO10__FUNC_SDA1>, <PINMUX_GPIO11__FUNC_SCL1>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - mediatek,drive-strength-adv = <0>; drive-strength = <6>; }; }; @@ -94,7 +92,7 @@ pinmux = <PINMUX_GPIO16__FUNC_SDA4>, <PINMUX_GPIO17__FUNC_SCL4>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - mediatek,drive-strength-adv = <7>; + drive-strength-microamp = <1000>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 5d8b68f86ce4..2ee45752583c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -3880,7 +3880,7 @@ }; }; - gpu0-thermal { + gpu-thermal { polling-delay = <1000>; polling-delay-passive = <250>; thermal-sensors = <&lvts_ap MT8195_AP_GPU0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 50cbaefa1a99..4211a992dd9d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -308,7 +308,7 @@ mmc1_uhs_pins: mmc1-uhs-pins { clk-pins { pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -319,7 +319,7 @@ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>, <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 24581f7410aa..eb449bfa8803 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -300,9 +300,8 @@ }; scpsys: syscon@10006000 { - compatible = "mediatek,mt8365-syscfg", "syscon", "simple-mfd"; + compatible = "mediatek,mt8365-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts new file mode 100644 index 000000000000..1474bef7e754 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Chris Chen <chris-qj.chen@mediatek.com> + * Pablo Sun <pablo.sun@mediatek.com> + * Macpaul Lin <macpaul.lin@mediatek.com> + */ +/dts-v1/; + +#include "mt8188.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/usb/pd.h> + +/ { + model = "MediaTek Genio-700 EVK"; + compatible = "mediatek,mt8390-evk", "mediatek,mt8390", + "mediatek,mt8188"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x2 0x00000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + apu_mem: memory@55000000 { + compatible = "shared-dma-pool"; + reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ + }; + + vpu_mem: memory@57000000 { + compatible = "shared-dma-pool"; + reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ + }; + }; + + common_fixed_5v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "5v_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + edp_panel_fixed_3v3: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "edp_panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_3v3_en_pins>; + }; + + gpio_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "gpio_3v3_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sdio_fixed_1v8: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "sdio_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; + + sdio_fixed_3v3: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "sdio_card"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + touch0_fixed_3v3: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "touch_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 119 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_hub_fixed_3v3: regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "usb_hub_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */ + startup-delay-us = <10000>; + enable-active-high; + }; + + usb_hub_reset_1v8: regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "usb_hub_reset"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */ + vin-supply = <&usb_hub_fixed_3v3>; + }; + + usb_p0_vbus: regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "usb_p0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p1_vbus: regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "usb_p1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p2_vbus: regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "usb_p2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&touch0_fixed_3v3>; + VDDIO-supply = <&mt6359_vio18_ldo_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + pinctrl-1 = <&rt1715_int_pins>; + clock-frequency = <1000000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + no-sdio; + cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mt6359_vpa_buck_reg>; + vqmmc-supply = <&mt6359_vsim1_ldo_reg>; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpa_buck_reg { + regulator-max-microvolt = <3100000>; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsim1_ldo_reg { + regulator-enable-ramp-delay = <480>; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&mt6359codec { + mediatek,mic-type-0 = <1>; /* ACC */ + mediatek,mic-type-1 = <3>; /* DCC */ +}; + +&pio { + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>, + <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>, + <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>, + <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>, + <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>, + <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>, + <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>, + <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>, + <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>, + <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>, + <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>, + <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>, + <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>, + <PINMUX_GPIO117__FUNC_O_I2SO2_D0>, + <PINMUX_GPIO118__FUNC_O_I2SO2_D1>, + <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, + <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, + <PINMUX_GPIO124__FUNC_I0_PCM_DI>, + <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>, + <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>, + <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>, + <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>; + }; + }; + + dptx_pins: dptx-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>; + bias-pull-up; + }; + }; + + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { + pins1 { + pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>; + output-high; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, + <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, + <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, + <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, + <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; + drive-strength = <8>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, + <PINMUX_GPIO146__FUNC_B_GPIO146>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, + <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, + <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, + <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; + drive-strength = <8>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, + <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, + <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, + <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, + <PINMUX_GPIO140__FUNC_B_GPIO140>, + <PINMUX_GPIO141__FUNC_B_GPIO141>, + <PINMUX_GPIO142__FUNC_B_GPIO142>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, + <PINMUX_GPIO144__FUNC_B_GPIO144>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, + <PINMUX_GPIO136__FUNC_B_GPIO136>, + <PINMUX_GPIO137__FUNC_B_GPIO137>, + <PINMUX_GPIO138__FUNC_B_GPIO138>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, + <PINMUX_GPIO132__FUNC_B_GPIO132>, + <PINMUX_GPIO133__FUNC_B_GPIO133>, + <PINMUX_GPIO134__FUNC_B_GPIO134>; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, + <PINMUX_GPIO63__FUNC_B1_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c5_pins: i2c5-pins { + pins { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + gpio_key_pins: gpio-key-pins { + pins { + pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>, + <PINMUX_GPIO43__FUNC_B1_KPCOL1>, + <PINMUX_GPIO44__FUNC_B1_KPROW0>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-insert { + pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, + <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, + <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, + <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, + <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_default_pins: mmc2-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; + drive-strength = <4>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-pcm { + pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>; + }; + }; + + mmc2_uhs_pins: mmc2-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; + drive-strength = <4>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, + <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, + <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, + <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, + <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_eint_pins: mmc2-eint-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc2_dat1_pins: mmc2-dat1-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + panel_default_pins: panel-default-pins { + pins-dcdc { + pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>; + output-low; + }; + + pins-en { + pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>; + output-low; + }; + + pins-rst { + pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>; + output-high; + }; + }; + + rt1715_int_pins: rt1715-int-pins { + pins_cmd0_dat { + pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>; + bias-pull-up; + input-enable; + }; + }; + + spi0_pins: spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; + bias-disable; + }; + }; + + spi1_pins: spi1-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-disable; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + touch_pins: touch-pins { + pins-irq { + pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>; + output-high; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>, + <PINMUX_GPIO34__FUNC_I1_URXD1>; + bias-pull-up; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, + <PINMUX_GPIO36__FUNC_I1_URXD2>; + bias-pull-up; + }; + }; + + usb_default_pins: usb-default-pins { + pins-iddig { + pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>; + input-enable; + bias-pull-up; + }; + + pins-valid { + pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; + input-enable; + }; + + pins-vbus { + pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>; + output-high; + }; + + }; + + usb1_default_pins: usb1-default-pins { + pins-valid { + pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>; + input-enable; + }; + + pins-usb-hub-3v3-en { + pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>; + output-high; + }; + }; + + wifi_pwrseq_pins: wifi-pwrseq-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>; + output-low; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; +}; + +&xhci1 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_hub_reset_1v8>; +}; + +&xhci2 { + status = "okay"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index 1558649f633c..a06610fff8ad 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -475,7 +475,7 @@ <PINMUX_GPIO86__FUNC_GBE_RXC>, <PINMUX_GPIO87__FUNC_GBE_RXDV>, <PINMUX_GPIO88__FUNC_GBE_TXEN>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; }; pins-mdio { @@ -502,7 +502,7 @@ <PINMUX_GPIO78__FUNC_GBE_TXD2>, <PINMUX_GPIO79__FUNC_GBE_TXD1>, <PINMUX_GPIO80__FUNC_GBE_TXD0>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; }; }; @@ -567,7 +567,7 @@ pinmux = <PINMUX_GPIO12__FUNC_SDA2>, <PINMUX_GPIO13__FUNC_SCL2>; bias-pull-up = <MTK_PULL_SET_RSEL_111>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; }; }; @@ -582,7 +582,7 @@ mmc0_default_pins: mmc0-default-pins { pins-clk { pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -597,13 +597,13 @@ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, <PINMUX_GPIO121__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-rst { pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <MTK_DRIVE_6mA>; + drive-strength = <6>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -611,7 +611,7 @@ mmc0_uhs_pins: mmc0-uhs-pins { pins-clk { pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -626,19 +626,19 @@ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, <PINMUX_GPIO121__FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-ds { pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; pins-rst { pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -646,7 +646,7 @@ mmc1_default_pins: mmc1-default-pins { pins-clk { pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -657,7 +657,7 @@ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -665,7 +665,7 @@ mmc1_uhs_pins: mmc1-uhs-pins { pins-clk { pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -676,7 +676,7 @@ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; }; @@ -854,6 +854,10 @@ &u3phy1 { status = "okay"; + + u3port1: usb-phy@700 { + mediatek,force-mode; + }; }; &u3phy2 { @@ -900,6 +904,8 @@ }; &xhci1 { + phys = <&u2port1 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts new file mode 100644 index 000000000000..e4b2af9489a8 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts @@ -0,0 +1,1127 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2024 Kontron Europe GmbH + * + * Author: Michael Walle <mwalle@kernel.org> + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + model = "Kontron 3.5\"-SBC-i1200"; + compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195"; + + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + key-0 { + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-0 { + gpios = <&pio 107 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x0 0x80000000>; + }; + + vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + vpu_mem: memory@53000000 { + compatible = "shared-dma-pool"; + reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_mem: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + snd_dma_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0x1100000>; + no-map; + }; + + apu_mem: memory@62000000 { + compatible = "shared-dma-pool"; + reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ + }; + }; + + thermal_sensor0: thermal-sensor-0 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = <(-25000) 1474 + (-20000) 1374 + (-15000) 1260 + (-10000) 1134 + (-5000) 1004 + 0 874 + 5000 750 + 10000 635 + 15000 532 + 20000 443 + 25000 367 + 30000 303 + 35000 250 + 40000 206 + 45000 170 + 50000 141 + 55000 117 + 60000 97 + 65000 81 + 70000 68 + 75000 57 + 80000 48 + 85000 41 + 90000 35 + 95000 30 + 100000 25 + 105000 22 + 110000 19 + 115000 16 + 120000 14 + 125000 12 + 130000 10 + 135000 9 + 140000 8 + 145000 7 + 150000 6>; + }; + + thermal_sensor1: thermal-sensor-1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = <(-25000) 1474 + (-20000) 1374 + (-15000) 1260 + (-10000) 1134 + (-5000) 1004 + 0 874 + 5000 750 + 10000 635 + 15000 532 + 20000 443 + 25000 367 + 30000 303 + 35000 250 + 40000 206 + 45000 170 + 50000 141 + 55000 117 + 60000 97 + 65000 81 + 70000 68 + 75000 57 + 80000 48 + 85000 41 + 90000 35 + 95000 30 + 100000 25 + 105000 22 + 110000 19 + 115000 16 + 120000 14 + 125000 12 + 130000 10 + 135000 9 + 140000 8 + 145000 7 + 150000 6>; + }; + + thermal_sensor2: thermal-sensor-2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 2>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = <(-25000) 1474 + (-20000) 1374 + (-15000) 1260 + (-10000) 1134 + (-5000) 1004 + 0 874 + 5000 750 + 10000 635 + 15000 532 + 20000 443 + 25000 367 + 30000 303 + 35000 250 + 40000 206 + 45000 170 + 50000 141 + 55000 117 + 60000 97 + 65000 81 + 70000 68 + 75000 57 + 80000 48 + 85000 41 + 90000 35 + 95000 30 + 100000 25 + 105000 22 + 110000 19 + 115000 16 + 120000 14 + 125000 12 + 130000 10 + 135000 9 + 140000 8 + 145000 7 + 150000 6>; + }; +}; + +&auxadc { + status = "okay"; +}; + +ð { + phy-mode ="rgmii-id"; + phy-handle = <ðernet_phy0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + ethernet_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + interrupts-extended = <&pio 94 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&pio 93 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpu { + status = "okay"; + mali-supply = <&mt6315_7_vbuck1>; +}; + +/* CSI1/CSI2 connector */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + +/* CSI3 connector */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; + + /* LVDS bridge @f */ +}; + +/* Touch panel connector */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + +/* B2B connector */ +&i2c4 { + clock-frequency = <100000>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + #interrupt-cells = <1>; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN1-supply = <&vsys>; + LDO_VIN2-supply = <&vsys>; + LDO_VIN3-supply = <&vsys>; + + mt6360_buck1: BUCK1 { + regulator-name = "emi_vdd2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: BUCK2 { + regulator-name = "emi_vddq"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: LDO1 { + regulator-name = "mt6360_ldo1"; /* Test point */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo2: LDO2 { + regulator-name = "panel1_p1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: LDO3 { + regulator-name = "vmc_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: LDO5 { + regulator-name = "vmch_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo6: LDO6 { + regulator-name = "mt6360_ldo6"; /* Test point */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: LDO7 { + regulator-name = "emi_vmddr_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + }; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + hs400-ds-delay = <0x14c11>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sdio; + no-sd; + non-removable; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>, <&mmc1_detect_pins>; + pinctrl-1 = <&mmc1_default_pins>; + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc1_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc2_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_md_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_others_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins_default>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins_default>; + status = "okay"; +}; + +&pciephy { + status = "okay"; +}; + +&pio { + eth_default_pins: eth-default-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <8>; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO86__FUNC_GBE_RXC>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + + pins-reset { + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; + output-high; + }; + + pins-interrupt { + pinmux = <PINMUX_GPIO94__FUNC_GPIO94>; + input-enable; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + }; + + gpio_keys_pins: gpio-keys-pins { + pins { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = <PINMUX_GPIO14__FUNC_SDA3>, + <PINMUX_GPIO15__FUNC_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_detect_pins: mmc1-detect-pins { + pins-insert { + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; + bias-pull-up; + }; + }; + + nor_pins_default: nor-default-pins { + pins-ck-io { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + drive-strength = <6>; + bias-pull-down; + }; + + pins-cs { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pcie0_pins_default: pcie0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie1_pins_default: pcie1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>, + <PINMUX_GPIO1__FUNC_CLKREQN_1>, + <PINMUX_GPIO2__FUNC_WAKEN_1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + led_pins: led-pins { + pins-power-en { + pinmux = <PINMUX_GPIO107__FUNC_GPIO107>; + output-high; + }; + }; + + spi0_pins: spi0-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>, + <PINMUX_GPIO134__FUNC_SPIM0_MO>, + <PINMUX_GPIO133__FUNC_SPIM0_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>; + bias-pull-down; + }; + }; + + spi1_pins: spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, + <PINMUX_GPIO138__FUNC_SPIM1_MO>, + <PINMUX_GPIO137__FUNC_SPIM1_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO139__FUNC_SPIM1_MI>; + bias-pull-down; + }; + }; + + uart0_pins: uart0-pins { + pins-rx { + pinmux = <PINMUX_GPIO99__FUNC_URXD0>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins-rx { + pinmux = <PINMUX_GPIO103__FUNC_URXD1>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO102__FUNC_UTXD1>; + }; + + pins-rts { + pinmux = <PINMUX_GPIO100__FUNC_URTS1>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO101__FUNC_UCTS1>; + input-enable; + }; + }; + + uart2_pins: uart2-pins { + pins-rx { + pinmux = <PINMUX_GPIO68__FUNC_URXD2>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO67__FUNC_UTXD2>; + }; + + pins-rts { + pinmux = <PINMUX_GPIO66__FUNC_URTS2>; + }; + + pins-cts { + pinmux = <PINMUX_GPIO65__FUNC_UCTS2>; + input-enable; + }; + }; + + uart3_pins: uart3-pins { + pins-rx { + pinmux = <PINMUX_GPIO5__FUNC_URXD3>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-tx { + pinmux = <PINMUX_GPIO4__FUNC_UTXD3>; + }; + }; + + uart4_pins: uart4-pins { + pins-rx { + pinmux = <PINMUX_GPIO7__FUNC_URXD4>; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = <PINMUX_GPIO6__FUNC_UTXD4>; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem>; + firmware-name = "mediatek/mt8195/scp.img"; + status = "okay"; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-name = "Vgpu"; + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; +}; + +/* USB3.2 front port */ +&ssusb0 { + dr_mode = "host"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +/* USB2.0 M.2 Key-E */ +&ssusb2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +/* USB2.0 to on-board usb hub */ +&ssusb3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <18500000>; + }; +}; + +/* B2B connector */ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&thermal_zones { + cpu-thermal { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&thermal_sensor0>; + + trips { + trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + pcb-top-thermal { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&thermal_sensor1>; + + trips { + trip-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + pcb-bottom-thermal { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&thermal_sensor2>; + + trips { + trip-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +/* USB3 */ +&u3phy0 { + status = "okay"; +}; + +/* PCIe1/USB2 */ +&u3phy1 { + status = "okay"; +}; + +/* USB2 */ +&u3phy2 { + status = "okay"; +}; + +/* USB2 */ +&u3phy3 { + status = "okay"; +}; + +/* USB3.2 front port */ +&xhci0 { + status = "okay"; +}; + +/* USB2.0 M.2 Key-B */ +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + mediatek,u3p-dis-msk = <0x01>; + status = "okay"; +}; + +/* USB2.0 M.2 Key-E */ +&xhci2 { + status = "okay"; +}; + +/* USB2.0 to on-board usb hub */ +&xhci3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts index e5d9b671a405..4b5f6cf16f70 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts @@ -140,6 +140,38 @@ }; }; +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + ð { phy-mode = "rgmii-rxid"; phy-handle = <&rgmii_phy>; @@ -343,6 +375,14 @@ }; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + /* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */ &mmc0 { pinctrl-names = "default", "state_uhs"; @@ -434,6 +474,8 @@ }; &pio { + mediatek,rsel-resistance-in-si-unit; + eth_default_pins: eth-default-pins { pins-cc { pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, @@ -509,7 +551,7 @@ pins-bus { pinmux = <PINMUX_GPIO12__FUNC_SDA2>, <PINMUX_GPIO13__FUNC_SCL2>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-pull-up = <1000>; drive-strength = <6>; drive-strength-microamp = <1000>; }; @@ -519,7 +561,7 @@ pins-bus { pinmux = <PINMUX_GPIO16__FUNC_SDA4>, <PINMUX_GPIO17__FUNC_SCL4>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-pull-up = <1000>; drive-strength-microamp = <1000>; }; }; @@ -528,7 +570,7 @@ pins { pinmux = <PINMUX_GPIO25__FUNC_SDA6>, <PINMUX_GPIO26__FUNC_SCL6>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; + bias-disable; }; }; @@ -683,6 +725,26 @@ }; }; + usb3_port0_pins: usb3p0-default-pins { + pins-vbus { + pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>; + input-enable; + }; + }; + + usb2_port0_pins: usb2p0-default-pins { + pins-iddig { + pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>; + input-enable; + bias-pull-up; + }; + + pins-vbus { + pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>; + output-low; + }; + }; + wifi_vreg_pins: wifi-vreg-pins { pins-wifi-pmu-en { pinmux = <PINMUX_GPIO65__FUNC_GPIO65>; @@ -707,6 +769,10 @@ status = "okay"; }; +&pciephy { + status = "okay"; +}; + &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; @@ -774,6 +840,18 @@ }; }; +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + &uart0 { /* Exposed at 40 pin connector */ pinctrl-0 = <&uart0_pins>; @@ -789,6 +867,8 @@ }; &ssusb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb3_port0_pins>; role-switch-default-mode = "host"; usb-role-switch; vusb33-supply = <&mt6359_vusb_ldo_reg>; @@ -802,6 +882,8 @@ }; &ssusb2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_port0_pins>; vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 2c5574734c9e..e60acc74e822 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -13,6 +13,20 @@ priority = <200>; }; + i2c0_imux: i2c-mux-0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + + i2c0_emux: i2c-mux-1 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + leds { compatible = "gpio-leds"; led-0 { @@ -248,6 +262,186 @@ default-state = "off"; }; }; + + sfp_eth12: sfp-eth12 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth13: sfp-eth13 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth14: sfp-eth14 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth15: sfp-eth15 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth48: sfp-eth48 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp5>; + tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth49: sfp-eth49 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp6>; + tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth50: sfp-eth50 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp7>; + tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth51: sfp-eth51 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp8>; + tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth52: sfp-eth52 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp9>; + tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth53: sfp-eth53 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp10>; + tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth54: sfp-eth54 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp11>; + tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth55: sfp-eth55 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp12>; + tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth56: sfp-eth56 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp13>; + tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth57: sfp-eth57 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp14>; + tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth58: sfp-eth58 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp15>; + tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth59: sfp-eth59 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp16>; + tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth60: sfp-eth60 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp17>; + tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth61: sfp-eth61 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp18>; + tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth62: sfp-eth62 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp19>; + tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth63: sfp-eth63 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp20>; + tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + }; }; &sgpio0 { @@ -385,21 +579,6 @@ }; }; -&axi { - i2c0_imux: i2c-mux-0 { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c0>; - }; - i2c0_emux: i2c-mux-1 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c0>; - }; -}; - &i2c0_imux { pinctrl-names = "i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4", @@ -535,169 +714,6 @@ }; }; -&axi { - sfp_eth12: sfp-eth12 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth13: sfp-eth13 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth14: sfp-eth14 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth15: sfp-eth15 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth48: sfp-eth48 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp5>; - tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth49: sfp-eth49 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp6>; - tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth50: sfp-eth50 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp7>; - tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth51: sfp-eth51 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp8>; - tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth52: sfp-eth52 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp9>; - tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth53: sfp-eth53 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp10>; - tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth54: sfp-eth54 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp11>; - tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth55: sfp-eth55 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp12>; - tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth56: sfp-eth56 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp13>; - tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth57: sfp-eth57 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp14>; - tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth58: sfp-eth58 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp15>; - tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth59: sfp-eth59 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp16>; - tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp17>; - tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp18>; - tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp19>; - tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - }; - sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp20>; - tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - }; -}; - &switch { ethernet-ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index af2f1831f07f..196868898f49 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -13,6 +13,13 @@ priority = <200>; }; + i2c0_imux: i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + leds { compatible = "gpio-leds"; led-0 { @@ -56,6 +63,46 @@ default-state = "off"; }; }; + + sfp_eth60: sfp-eth60 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth61: sfp-eth61 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth62: sfp-eth62 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth63: sfp-eth63 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; + rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; + }; }; &gpio { @@ -119,15 +166,6 @@ microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>; }; -&axi { - i2c0_imux: i2c-mux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c0>; - }; -}; - &i2c0_imux { pinctrl-names = "i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4", @@ -159,45 +197,6 @@ }; }; -&axi { - sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; - }; - sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; - rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; - }; -}; - &mdio0 { status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts index 1607ee14216f..82a59e33c46c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -1,11 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/input/gpio-keys.h> - -#include "tegra234-p3767.dtsi" -#include "tegra234-p3768-0000.dtsi" +#include "tegra234-p3768-0000+p3767.dtsi" / { compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234"; @@ -29,83 +25,12 @@ status = "okay"; }; - pwm@32a0000 { - assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; - assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; - status = "okay"; - }; - hda@3510000 { nvidia,model = "NVIDIA Jetson Orin NX HDA"; }; - - padctl@3520000 { - status = "okay"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-force-recovery { - label = "Force Recovery"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; - }; - - key-power { - label = "Power"; - gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_POWER>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - - key-suspend { - label = "Suspend"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - }; - }; - - pwm-fan { - cooling-levels = <0 88 187 255>; - }; - - vdd_3v3_pcie: regulator-vdd-3v3-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_PCIE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; }; sound { label = "NVIDIA Jetson Orin NX APE"; }; - - thermal-zones { - tj-thermal { - cooling-maps { - map-active-0 { - cooling-device = <&fan 0 1>; - trip = <&tj_trip_active0>; - }; - - map-active-1 { - cooling-device = <&fan 1 2>; - trip = <&tj_trip_active1>; - }; - - map-active-2 { - cooling-device = <&fan 2 3>; - trip = <&tj_trip_active2>; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts index dc2d4bef1e83..9f5e07012b87 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts @@ -1,11 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/input/gpio-keys.h> - -#include "tegra234-p3767.dtsi" -#include "tegra234-p3768-0000.dtsi" +#include "tegra234-p3768-0000+p3767.dtsi" / { compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234"; @@ -17,32 +13,7 @@ }; }; - pwm-fan { - cooling-levels = <0 88 187 255>; - }; - sound { label = "NVIDIA Jetson Orin Nano APE"; }; - - thermal-zones { - tj-thermal { - cooling-maps { - map-active-0 { - cooling-device = <&fan 0 1>; - trip = <&tj_trip_active0>; - }; - - map-active-1 { - cooling-device = <&fan 1 2>; - trip = <&tj_trip_active1>; - }; - - map-active-2 { - cooling-device = <&fan 2 3>; - trip = <&tj_trip_active2>; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi index 5d0298b6c30d..6d64a24fa251 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi @@ -1,7 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra234-p3767.dtsi" + / { - compatible = "nvidia,p3768-0000"; aliases { serial0 = &tcu; @@ -210,6 +214,7 @@ compatible = "pwm-fan"; pwms = <&pwm3 0 45334>; #cooling-cells = <2>; + cooling-levels = <0 88 187 255>; }; vdd_1v8_sys: regulator-vdd-1v8-sys { @@ -241,4 +246,25 @@ serial { status = "okay"; }; + + thermal-zones { + tj-thermal { + cooling-maps { + map-active-0 { + cooling-device = <&fan 0 1>; + trip = <&tj_trip_active0>; + }; + + map-active-1 { + cooling-device = <&fan 1 2>; + trip = <&tj_trip_active1>; + }; + + map-active-2 { + cooling-device = <&fan 2 3>; + trip = <&tj_trip_active2>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f63abb43e9fe..0e5c810304fb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -5,11 +5,13 @@ apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-schneider-hmibsc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb @@ -29,8 +31,13 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-c50.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-m216.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-osprey.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-surnia.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb @@ -93,9 +100,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb @@ -106,6 +115,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb @@ -175,6 +185,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb @@ -241,8 +252,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb + +sm8650-hdk-display-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts new file mode 100644 index 000000000000..75c6137e5a11 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Linaro Ltd. + */ + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Schneider Electric HMIBSC Board"; + compatible = "schneider,apq8016-hmibsc", "qcom,apq8016"; + + aliases { + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + i2c4 = &blsp_i2c3; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + spi0 = &blsp_spi5; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&msm_key_volp_n_default>; + pinctrl-names = "default"; + + button { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pm8916_mpps_leds>; + pinctrl-names = "default"; + + led-1 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + ecc-size = <16>; + }; + }; + + usb-hub { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + adv_bridge: bridge@39 { + compatible = "adi,adv7533"; + reg = <0x39>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + a2vdd-supply = <&pm8916_l6>; + dvdd-supply = <&pm8916_l6>; + pvdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + pinctrl-names = "default","sleep"; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&blsp_spi5 { + cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; + +&blsp_uart1 { + label = "UART0"; + status = "okay"; +}; + +&blsp_uart2 { + label = "UART1"; + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&pm8916_codec { + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM", + "NC", + "NC"; + + usb_hub_reset_pm: usb-hub-reset-pm-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "NC", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "NC"; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + output-low; + }; +}; + +&pm8916_resin { + linux,code = <KEY_POWER>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + model = "HMIBSC"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + status = "okay"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +&tlmm { + pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>; + pinctrl-names = "default"; + + adv7533_int_active: adv533-int-active-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* + * UART1 being the debug console supports various modes of + * operation (RS-232/485/422) controlled via GPIOs configured + * mux as follows: + * + * gpio100 gpio99 UART mode + * 0 0 loopback + * 0 1 RS-232 + * 1 0 RS-485 + * 1 1 RS-422 + * + * The default mode configured here is RS-232 mode. + */ + uart1_mux0_rs232_high: uart1-mux0-rs232-state { + bootph-all; + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + + uart1_mux1_rs232_low: uart1-mux1-rs232-state { + bootph-all; + pins = "gpio100"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; + pinctrl-names = "default", "device"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + firmware-name = "qcom/apq8016/wcnss.mbn"; + status = "okay"; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in msm8916.dtsi */ + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&blsp_i2c4_default { + drive-strength = <16>; +}; + +&blsp_i2c6_default { + drive-strength = <16>; +}; + +&blsp_uart1_default { + bootph-all; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts new file mode 100644 index 000000000000..5bb021cb29cd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "ipq5018.dtsi" + +/ { + model = "TP-Link Archer AX55 v1"; + compatible = "tplink,archer-ax55-v1", "qcom,ipq5018"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN_ONLINE; + gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_WAN; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_USB; + gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + }; + }; + + buttons { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button-reset { + debounce-interval = <60>; + gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + + button-wps { + debounce-interval = <60>; + gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + button_pins: button-pins-state { + pins = "gpio25", "gpio31"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + led_pins: led-pins-state { + pins = "gpio10", "gpio11", "gpio13", "gpio18", "gpio22", + "gpio38", "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + uart_pins: uart-pins-state { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 32b178b639f0..7e6e2c121979 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -179,7 +179,6 @@ <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; }; tcsr_mutex: hwlock@1905000 { diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 770d9c2fb456..573656587c0d 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -208,7 +208,6 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; clocks = <&xo_board>, <&sleep_clk>, <0>, diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 17ab6c475958..e1e45da7f787 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -396,7 +396,7 @@ }; }; - gcc: gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq6018"; reg = <0x0 0x01800000 0x0 0x80000>; clocks = <&xo>, <&sleep_clk>; @@ -457,6 +457,25 @@ }; }; + sdhc: mmc@7804000 { + compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x07804000 0x0 0x1000>, + <0x0 0x07805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <192000000>; + status = "disabled"; + }; + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; @@ -685,6 +704,7 @@ clocks = <&xo>; clock-names = "ref"; tx-fifo-resize; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -923,7 +943,6 @@ thermal-zones { nss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; trips { @@ -937,7 +956,6 @@ nss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; trips { @@ -951,7 +969,6 @@ wcss-phya0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; trips { @@ -979,7 +996,6 @@ cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 13>; trips { @@ -1009,7 +1025,6 @@ lpass-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 14>; trips { @@ -1023,7 +1038,6 @@ ddrss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5d42de829e75..284a4553070f 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -363,7 +363,7 @@ }; }; - gcc: gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; clocks = <&xo>, @@ -666,6 +666,7 @@ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -715,6 +716,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -982,7 +984,6 @@ thermal-zones { nss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -997,7 +998,6 @@ nss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -1012,7 +1012,6 @@ nss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -1027,7 +1026,6 @@ wcss-phya0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -1042,7 +1040,6 @@ wcss-phya1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -1057,7 +1054,6 @@ cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; @@ -1072,7 +1068,6 @@ cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 10>; @@ -1087,7 +1082,6 @@ cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 11>; @@ -1102,7 +1096,6 @@ cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 12>; @@ -1117,7 +1110,6 @@ cluster_thermal: cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 13>; @@ -1132,7 +1124,6 @@ wcss-phyb0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 14>; @@ -1147,7 +1138,6 @@ wcss-phyb1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 15>; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 7f2e5cbf3bbb..48dfafea46a7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interconnect/qcom,ipq9574.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> #include <dt-bindings/thermal/thermal.h> @@ -232,6 +233,16 @@ clock-names = "core"; }; + mdio: mdio@90000 { + compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x5a1>; @@ -305,7 +316,7 @@ <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; + #interconnect-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -749,8 +760,6 @@ thermal-zones { nss-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 3>; trips { @@ -763,8 +772,6 @@ }; ubi-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 4>; trips { @@ -777,8 +784,6 @@ }; ubi-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 5>; trips { @@ -791,8 +796,6 @@ }; ubi-2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 6>; trips { @@ -805,8 +808,6 @@ }; ubi-3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 7>; trips { @@ -819,8 +820,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 8>; trips { @@ -833,8 +832,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 9>; trips { @@ -847,8 +844,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 10>; trips { @@ -877,8 +872,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 11>; trips { @@ -907,8 +900,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 12>; trips { @@ -937,8 +928,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 13>; trips { @@ -967,8 +956,6 @@ }; wcss-phyb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 14>; trips { @@ -981,8 +968,6 @@ }; top-glue-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts index 366914be7d53..fba68bf8bf79 100644 --- a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts +++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts @@ -9,3 +9,17 @@ compatible = "samsung,fortuna3g", "qcom,msm8916"; chassis-type = "handset"; }; + +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&st_accel { + status = "okay"; +}; + +&st_magn { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index b32c7a97394d..b4ce14a79370 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -135,6 +136,17 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x4500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <150 237 450 500 590>; + qcom,mbhc-vthreshold-high = <150 237 450 500 590>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -170,6 +182,20 @@ status = "okay"; }; +&sound { + model = "acer-a1-724"; + audio-routing = + "DMIC1", "MIC BIAS External1", + "DMIC1", "Digital Mic1", + "AMIC2", "MIC BIAS Internal2", + "DMIC2", "MIC BIAS External1", + "DMIC2", "Digital Mic2"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>; + pinctrl-names = "default", "sleep"; +}; + &usb { extcon = <&usb_id>, <&usb_id>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index b748d140b52e..f7be7e371820 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -23,6 +24,28 @@ stdout-path = "serial0"; }; + battery: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + voltage-min-design-microvolt = <3700000>; + voltage-max-design-microvolt = <4200000>; + energy-full-design-microwatt-hours = <13690000>; + charge-full-design-microamp-hours = <3700000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = + <4186000 100>, <4126000 95>, <4078000 90>, + <4036000 85>, <3997000 80>, <3962000 75>, + <3932000 70>, <3904000 65>, <3874000 60>, + <3839000 55>, <3809000 50>, <3792000 45>, + <3780000 40>, <3772000 35>, <3764000 30>, + <3752000 25>, <3731000 20>, <3704000 16>, + <3677000 13>, <3670000 11>, <3668000 10>, + <3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>, + <3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>, + <3310000 1>, <3000000 0>; + }; + flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; @@ -111,6 +134,22 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_bms { + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <150 180 237 450 500>; + qcom,mbhc-vthreshold-high = <150 180 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -141,6 +180,14 @@ status = "okay"; }; +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { extcon = <&usb_id>, <&usb_id>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts new file mode 100644 index 000000000000..a823a1c40208 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "LG Leon LTE"; + compatible = "lg,c50", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down-button { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <5000>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts new file mode 100644 index 000000000000..07345e694f6f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "LG K10 (K420n)"; + compatible = "lg,m216", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3300000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <8800000>; + charge-full-design-microamp-hours = <2300000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>, + <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>, + <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>, + <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>, + <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>, + <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>, + <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>, + <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down-button { + label = "Volume Down"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@11 { + compatible = "bosch,bmc150_accel"; + reg = <0x11>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; + + magnetometer@13 { + compatible = "bosch,bmc150_magn"; + reg = <0x13>; + + interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&magn_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x4a00000>; +}; + +&pm8916_bms { + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; + + status = "okay"; +}; + +&pm8916_charger { + qcom,fast-charge-safe-current = <700000>; + qcom,fast-charge-safe-voltage = <4300000>; + + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_charger>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_charger>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + magn_int_default: magn-int-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ce-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi new file mode 100644 index 000000000000..6a27d0ecd2ad --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-1 = <&usb_id_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + touchscreen: touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + vio-supply = <&pm8916_l6>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <1>; + syna,nosleep-mode = <1>; /* Allow sleeping */ + }; + + rmi4-f11@11 { + reg = <11>; + syna,sensor-type = <1>; /* Touchscreen */ + }; + }; +}; + +&blsp_uart1 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +/* CTS/RTX are not used */ +&blsp_uart1_default { + pins = "gpio0", "gpio1"; +}; +&blsp_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_id_sleep: usb-id-sleep-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts new file mode 100644 index 000000000000..8380451ebbf6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto G4 Play"; + compatible = "motorola,harpia", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + }; + + /* charger@6b */ +}; + +&blsp_i2c4 { + status = "okay"; + + accelerometer@19 { + compatible = "bosch,bma253"; + reg = <0x19>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>, + <&tlmm 119 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; + + /* proximity@49 */ +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &headset_switch_supply_en + &headset_switch_in>; + pinctrl-1 = <&cdc_pdm_sleep &headset_switch_supply_en + &headset_switch_in>; + pinctrl-names = "default", "sleep"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115", "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + battery_alert_default: battery-alert-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + headset_switch_in: headset-switch-in-state { + pins = "gpio112"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + headset_switch_supply_en: headset-switch-supply-en-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio118"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts new file mode 100644 index 000000000000..ec5589fc69bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto G 2015"; + compatible = "motorola,osprey", "qcom,msm8916"; + chassis-type = "handset"; + + reg_touch_vdda: regulator-touch-vdda { + compatible = "regulator-fixed"; + regulator-name = "touch_vdda"; + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&touch_vdda_default>; + pinctrl-names = "default"; + startup-delay-us = <300>; + vin-supply = <&pm8916_l16>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + }; +}; + +&blsp_i2c6 { + /* magnetometer@c */ +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_touch_vdda>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + battery_alert_default: battery-alert-default-state { + pins = "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch_vdda_default: touch-vdda-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts new file mode 100644 index 000000000000..eecf78ba45bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto E 2015 LTE"; + compatible = "motorola,surnia", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + }; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + battery_alert_default: battery-alert-default-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 4bbbee80b5e4..e6355e5e2177 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -28,6 +28,12 @@ }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -245,7 +251,7 @@ &blsp_i2c4 { status = "okay"; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; interrupt-parent = <&tlmm>; @@ -253,6 +259,44 @@ pinctrl-names = "default"; pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&charger>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; }; }; @@ -476,6 +520,13 @@ bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 3b934f5eba47..906d31f1ea21 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -55,6 +55,12 @@ "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 391befa22bb4..fe39be7a742b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -29,6 +29,12 @@ "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts index fad2535255f7..800cb1038da0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -23,6 +23,12 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts index b412b61ca258..ec1debd2e245 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -23,6 +23,13 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + + &pm8916_l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index 5e933fb8b363..81b3e0760154 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { aliases { @@ -26,6 +27,12 @@ }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm_backlight: backlight { compatible = "pwm-backlight"; pwms = <&clk_pwm 0 100000>; @@ -78,6 +85,35 @@ max-microvolt = <3300000>; }; + i2c_nfc: i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&nfc_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5_nfc: nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + reg_motor_vdd: regulator-motor-vdd { compatible = "regulator-fixed"; regulator-name = "motor_vdd"; @@ -114,6 +150,82 @@ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; +}; + +&blsp_i2c2 { + /* Available sensors vary depending on model variant */ + status = "okay"; + + bosch_accel: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + bosch_magn: magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + st_accel: accelerometer@1d { + compatible = "st,lsm303c-accel"; + reg = <0x1d>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; + }; + + st_magn: magnetometer@1e { + compatible = "st,lsm303c-magn"; + reg = <0x1e>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; }; }; @@ -128,6 +240,8 @@ pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -151,6 +265,42 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -223,6 +373,13 @@ }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + backlight_en_default: backlight-en-default-state { pins = "gpio98"; function = "gpio"; @@ -263,6 +420,36 @@ bias-disable; }; + nfc_default: nfc-default-state { + irq-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + nfc_i2c_default: nfc-i2c-default-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; @@ -284,3 +471,13 @@ bias-disable; }; }; + +&pm8916_gpios { + nfc_clk_req: nfc-clk-req-state { + pins = "gpio2"; + function = "func1"; + power-source = <PM8916_GPIO_L2>; + bias-disable; + input-enable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts index 9d65fa58ba92..677e4e286ac0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -21,6 +21,76 @@ }; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&bosch_accel { + status = "okay"; +}; + +&bosch_magn { + status = "okay"; +}; + +&blsp_i2c6 { + /* pmic@34 is on i2c_nfc instead */ + /delete-node/ pmic@34; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + }; +}; + +&i2c_nfc { + /* nfc@27 is on &blsp_i2c6 */ + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &mpss_mem { /* Firmware for gprimeltecan needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 5882b3a593b8..135df1739dbd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -41,6 +41,12 @@ }; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + ®_motor_vdd { gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts index a66ce4b13547..582bfcb09684 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts @@ -10,6 +10,20 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&bosch_accel { + status = "okay"; +}; + +&bosch_magn { + status = "okay"; +}; + &mpss_mem { /* Firmware for grandprimelte needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index b438fa81886c..e7f265e3c2ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -15,6 +15,12 @@ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; @@ -26,3 +32,15 @@ &clk_pwm_backlight { status = "disabled"; }; + +&s3fwrn5_nfc { + status = "okay"; +}; + +&st_accel { + compatible = "st,lis2hh12"; + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index ebaa13c6b016..1981bb71f6a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -10,6 +10,12 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <700000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index cedff4166bfb..7383bcc603ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -308,7 +308,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -360,7 +360,7 @@ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -385,7 +385,7 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -410,8 +410,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -1978,7 +1977,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,remote-pid = <1>; label = "hexagon"; @@ -2459,7 +2458,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -2626,7 +2625,6 @@ thermal-zones { cpu0-1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2656,7 +2654,6 @@ cpu2-3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -2686,7 +2683,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2713,7 +2709,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -2728,7 +2723,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index 0c599e71a464..91acdb160227 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -33,6 +33,15 @@ }; }; + battery: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4300000>; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + gpio-hall-sensor { compatible = "gpio-keys"; @@ -82,7 +91,7 @@ #address-cells = <1>; #size-cells = <0>; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; @@ -91,6 +100,8 @@ pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -325,6 +336,42 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -510,6 +557,13 @@ bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index dd45975682b2..46d9480cd464 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -248,7 +248,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs1_mbox 8 0>; + mboxes = <&apcs1_mbox 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -443,8 +443,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs1_mbox 8 13>; - qcom,ipc-3 = <&apcs1_mbox 8 19>; + mboxes = <0>, <&apcs1_mbox 13>, <0>, <&apcs1_mbox 19>; apps_smsm: apps@0 { reg = <0>; @@ -2067,7 +2066,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs1_mbox 8 17>; + mboxes = <&apcs1_mbox 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -2299,7 +2298,6 @@ thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2330,7 +2328,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -2361,7 +2358,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -2392,7 +2388,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -2423,7 +2418,6 @@ cpu4567-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; @@ -2454,7 +2448,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -2482,7 +2475,6 @@ modem1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -2497,7 +2489,6 @@ modem2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2512,7 +2503,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts index 711d84dad9d7..2edf804eb7c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts @@ -301,5 +301,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts index a5957e79b818..336b916729e4 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -321,5 +321,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts index 6b9245cd8b0c..bdf1bfc79c56 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -326,5 +326,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts index 9ac4f507e321..fccb9c4360ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts @@ -322,5 +322,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts index b0588f30f8f1..d46325e79917 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -357,5 +357,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 5d818fe057dd..a4bfb624fb8a 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -195,7 +195,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -361,7 +361,7 @@ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -386,7 +386,7 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -411,8 +411,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -1267,7 +1266,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,remote-pid = <1>; label = "modem"; @@ -1748,7 +1747,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -1968,8 +1967,9 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { cpu0_alert: trip-point0 { temperature = <80000>; @@ -1991,8 +1991,9 @@ }; cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { cpu1_alert: trip-point0 { temperature = <80000>; @@ -2014,8 +2015,9 @@ }; cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { cpu2_alert: trip-point0 { temperature = <80000>; @@ -2037,8 +2039,9 @@ }; cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { cpu3_alert: trip-point0 { temperature = <80000>; @@ -2060,7 +2063,6 @@ }; cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; trips { cpu4_alert: trip-point0 { @@ -2083,7 +2085,6 @@ }; cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; trips { cpu5_alert: trip-point0 { @@ -2106,7 +2107,6 @@ }; cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; trips { cpu6_alert: trip-point0 { @@ -2129,7 +2129,6 @@ }; cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; trips { cpu7_alert: trip-point0 { @@ -2153,7 +2152,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi index 668e05185c21..fa36b62156bb 100644 --- a/arch/arm64/boot/dts/qcom/msm8956.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi @@ -8,8 +8,8 @@ #include "msm8976.dtsi" -&pmu { - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; +&pmu_a72 { + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0x30) | IRQ_TYPE_LEVEL_HIGH)>; }; &tsens { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index d2bb1ada361a..d62dcb76fa48 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -222,11 +222,17 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - pmu: pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + pmu_a72: pmu-a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0xf0) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -237,7 +243,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -361,7 +367,7 @@ smp2p-hexagon { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -384,7 +390,7 @@ smp2p-modem { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -407,7 +413,7 @@ smp2p-wcnss { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -433,9 +439,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -771,6 +775,36 @@ drive-strength = <2>; bias-disable; }; + + wcss_wlan_default: wcss-wlan-default-state { + wcss-wlan2-pins { + pins = "gpio40"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio41"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio42"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { @@ -785,10 +819,10 @@ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&rpmcc RPM_SMD_XO_A_CLK_SRC>, - <0>, - <0>, - <0>, - <0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; clock-names = "xo", "xo_a", "dsi0pll", @@ -808,6 +842,430 @@ reg = <0x01937000 0x30000>; }; + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@1a01000 { + compatible = "qcom,msm8976-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDP_TBU_CLK>, + <&gcc GCC_MDP_RT_TBU_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync", + "tbu", + "tbu_rt"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + iommus = <&apps_iommu 22>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + mdss_mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-177780000 { + opp-hz = /bits/ 64 <177780000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-360000000 { + opp-hz = /bits/ 64 <360000000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>, + <&gcc GCC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-161250000 { + opp-hz = /bits/ 64 <161250000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>, + <&gcc GCC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + phys = <&mdss_dsi1_phy>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdss_mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94a00 { + compatible = "qcom,dsi-phy-28nm-hpm-fam-b"; + reg = <0x01a94a00 0xd4>, + <0x01a94400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1_phy: phy@1a96a00 { + compatible = "qcom,dsi-phy-28nm-hpm-fam-b"; + reg = <0x01a96a00 0xd4>, + <0x01a96400 0x280>, + <0x01a96b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + adreno_gpu: gpu@1c00000 { + compatible = "qcom,adreno-510.0", "qcom,adreno"; + + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&gcc GCC_GFX3D_OXILI_CLK>, + <&gcc GCC_GFX3D_OXILI_AHB_CLK>, + <&gcc GCC_GFX3D_OXILI_GMEM_CLK>, + <&gcc GCC_GFX3D_BIMC_CLK>, + <&gcc GCC_GFX3D_OXILI_TIMER_CLK>, + <&gcc GCC_GFX3D_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "rbbmtimer", + "alwayson"; + + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&gpu_iommu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-supported-hw = <0xff>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmpd_opp_svs>; + opp-supported-hw = <0xff>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + required-opps = <&rpmpd_opp_nom>; + opp-supported-hw = <0xff>; + }; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + required-opps = <&rpmpd_opp_nom_plus>; + opp-supported-hw = <0xff>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmpd_opp_turbo>; + opp-supported-hw = <0xff>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmpd_opp_turbo>; + opp-supported-hw = <0xff>; + }; + }; + }; + + apps_iommu: iommu@1ee0000 { + compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2"; + reg = <0x01ee0000 0x3000>; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + + /* VFE */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x15000 0x1000>; + qcom,ctx-asid = <20>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x16000 0x1000>; + qcom,ctx-asid = <21>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP0 */ + iommu-ctx@17000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x17000 0x1000>; + qcom,ctx-asid = <22>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2"; + ranges = <0 0x01f08000 0x8000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX3D_TCU_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&gcc OXILI_CX_GDSC>; + + qcom,iommu-secure-id = <18>; + + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + + /* gfx3d user */ + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x0 0x1000>; + qcom,ctx-asid = <0>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d secure */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x1000 0x1000>; + qcom,ctx-asid = <2>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d priv */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x2000 0x1000>; + qcom,ctx-asid = <1>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x1000>, @@ -1034,6 +1492,81 @@ status = "disabled"; }; + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", + "dxe", + "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + power-domains = <&rpmpd MSM8976_VDDCX>, + <&rpmpd MSM8976_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcss_wlan_default>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; @@ -1124,7 +1657,6 @@ thermal-zones { aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -1139,7 +1671,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; trips { @@ -1153,7 +1684,6 @@ qdsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; trips { @@ -1167,7 +1697,6 @@ cam-isp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; trips { @@ -1181,7 +1710,7 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 4>; trips { @@ -1205,7 +1734,7 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 5>; trips { @@ -1229,7 +1758,7 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 6>; trips { @@ -1253,7 +1782,7 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 7>; trips { @@ -1277,7 +1806,7 @@ big-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 8>; trips { @@ -1301,7 +1830,7 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 9>; trips { @@ -1325,7 +1854,7 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 10>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 695e541832ad..917fa246857d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -183,7 +183,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; qcom,remote-pid = <6>; @@ -300,7 +300,7 @@ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -325,7 +325,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -1093,10 +1093,10 @@ timer: timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 0xff08>, - <GIC_PPI 3 0xff08>, - <GIC_PPI 4 0xff08>, - <GIC_PPI 1 0xff08>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; vph_pwr: vph-pwr-regulator { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 5ab583be9e0a..0386636a29f0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -405,7 +405,6 @@ &hsusb_phy1 { status = "okay"; - extcon = <&typec>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8d2cb6f41095..0fd2b1b944a5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -982,6 +982,8 @@ <&mmcc MDSS_MDP_CLK>; clock-names = "iface", "core"; + resets = <&mmcc MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; ranges; @@ -2077,24 +2079,20 @@ power-domains = <&gcc UFS_GDSC>; clock-names = - "core_clk_src", "core_clk", "bus_clk", "bus_aggr_clk", "iface_clk", - "core_clk_unipro_src", "core_clk_unipro", "core_clk_ice", "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk"; clocks = - <&gcc UFS_AXI_CLK_SRC>, <&gcc GCC_UFS_AXI_CLK>, <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_UFS_AHB_CLK>, - <&gcc UFS_ICE_CORE_CLK_SRC>, <&gcc GCC_UFS_UNIPRO_CORE_CLK>, <&gcc GCC_UFS_ICE_CORE_CLK>, <&rpmcc RPM_SMD_LN_BB_CLK>, @@ -2105,10 +2103,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>, - <150000000 300000000>, <75000000 150000000>, - <0 0>, + <150000000 300000000>, <0 0>, <0 0>, <0 0>; @@ -2483,6 +2479,13 @@ status = "disabled"; + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apcs_glb 27>; + }; + smd-edge { interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; @@ -2552,6 +2555,13 @@ memory-region = <&mdata_mem>; }; + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + smd-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; @@ -3091,6 +3101,7 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; snps,is-utmi-l1-suspend; + snps,parkmode-disable-ss-quirk; tx-fifo-resize; }; }; @@ -3497,6 +3508,14 @@ status = "disabled"; + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 9>; + }; + + smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; @@ -3553,6 +3572,63 @@ }; }; }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&lpass_q6_smmu 5>; + }; + + cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&lpass_q6_smmu 6>; + }; + + cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&lpass_q6_smmu 7>; + }; + + cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&lpass_q6_smmu 8>; + }; + + cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&lpass_q6_smmu 9>; + }; + + cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&lpass_q6_smmu 10>; + }; + + cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&lpass_q6_smmu 11>; + }; + + cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&lpass_q6_smmu 12>; + }; + }; }; }; @@ -3654,7 +3730,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3675,7 +3750,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -3696,7 +3770,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3717,7 +3790,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -3738,7 +3810,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -3760,7 +3831,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -3782,7 +3852,6 @@ m4m-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3797,7 +3866,6 @@ l3-or-venus-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3812,7 +3880,6 @@ cluster0-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3827,7 +3894,6 @@ cluster1-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -3842,7 +3908,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -3857,7 +3922,6 @@ q6-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -3872,7 +3936,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -3887,7 +3950,6 @@ modemtx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d795b2bbe133..7f44807b1b97 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -488,7 +488,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -509,7 +508,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -530,7 +528,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -551,7 +548,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -572,7 +568,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -593,7 +588,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -614,7 +608,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -635,7 +628,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -656,7 +648,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -671,7 +662,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -686,7 +676,6 @@ clust0-mhm-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -701,7 +690,6 @@ clust1-mhm-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -716,7 +704,6 @@ cluster1-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -731,7 +718,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -746,7 +732,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -761,7 +746,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -776,7 +760,6 @@ q6-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -791,7 +774,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -806,7 +788,6 @@ multimedia-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -1590,7 +1571,6 @@ * SoC VDDMX RPM Power Domain in the Adreno driver. */ power-domains = <&gpucc GPU_GX_GDSC>; - status = "disabled"; }; gpucc: clock-controller@5065000 { @@ -2164,6 +2144,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; @@ -3020,6 +3001,54 @@ }; }; + venus: video-codec@cc00000 { + compatible = "qcom,msm8998-venus"; + reg = <0x0cc00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VIDEO_TOP_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_mem>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; @@ -3195,6 +3224,7 @@ iommus = <&anoc2_smmu 0x1900>, <&anoc2_smmu 0x1901>; qcom,snoc-host-cap-8bit-quirk; + qcom,no-msa-ready-indicator; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi index 99369a0cdb61..d0db28336fa9 100644 --- a/arch/arm64/boot/dts/qcom/pm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm6125-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm6125_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 6de6ed562d97..59524609fb1e 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -13,7 +13,7 @@ thermal-zones { pm6150_thermal: pm6150-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; trips { @@ -166,5 +166,11 @@ reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm6150_vib: vibrator@5300 { + compatible = "qcom,pm6150-vib", "qcom,pmi632-vib"; + reg = <0x5300>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 0fce45276e5c..334f976f1154 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -10,9 +10,6 @@ / { thermal-zones { pm6150l-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150l_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index 3a2a841e83f1..a20ee2457101 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm6350-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm6350_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index 98dc04962fe3..156b2ddff0dc 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm660-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm660_temp>; @@ -74,6 +73,23 @@ }; }; + pm660_charger: charger@1000 { + compatible = "qcom,pm660-charger"; + reg = <0x1000>; + + interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pm660_rradc 3>, + <&pm660_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pm660_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -181,6 +197,14 @@ }; }; + pm660_rradc: adc@4500 { + compatible = "qcom,pm660-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; + pm660_gpios: gpio@c000 { compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 6fdbf507c262..0094e0ef058b 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm660l-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm660l_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index 3bf7cf5d1700..0761e6b5fd8d 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -11,7 +11,6 @@ thermal-zones { pm7250b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm7250b_temp>; @@ -45,6 +44,52 @@ #address-cells = <1>; #size-cells = <0>; + pm7250b_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm7250b_typec: typec@1500 { + compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + interrupts = <PM7250B_SID 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + vdd-vbus-supply = <&pm7250b_vbus>; + status = "disabled"; + }; + pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi index d1c5476af5ee..6e29468505b2 100644 --- a/arch/arm64/boot/dts/qcom/pm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -35,7 +35,7 @@ &thermal_zones { pm7325_thermal: pm7325-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm7325_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi index 8b00ece987d1..853a1d83a7f0 100644 --- a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm7550ba-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm7550ba_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi index 0ea641e12209..ef330194946b 100644 --- a/arch/arm64/boot/dts/qcom/pm8010.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8010-m-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8010_m_temp_alarm>; @@ -31,7 +30,6 @@ pm8010-n-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8010_n_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 3ba3ba5d8fce..a74a7ff660d2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm8150-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 1aee3270ce7b..3f7b0b6a1d10 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -12,7 +12,6 @@ thermal-zones { pm8150b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150b_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index ac08a09c64c2..3911d6d0d2e2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -12,7 +12,6 @@ thermal-zones { pm8150l-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150l_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi index 9ed9ba23e81e..cb55b23688d6 100644 --- a/arch/arm64/boot/dts/qcom/pm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi @@ -10,7 +10,7 @@ thermal-zones { pm8350_thermal: pm8350-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi index 05c105898892..cf82f8a64a9b 100644 --- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi @@ -10,7 +10,7 @@ thermal-zones { pm8350b_thermal: pm8350b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index aa74e21fe0dc..1a24e6439e36 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -48,7 +48,7 @@ thermal-zones { pm8350c_thermal: pm8350c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi index ae5bce3cf46e..decb8809fd36 100644 --- a/arch/arm64/boot/dts/qcom/pm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8450-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8450_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 797a18c249a4..896bcacb6490 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi index 72609f31c890..74d23b8970f4 100644 --- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550b_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi index 4dc1f03ab2c7..9d4734eabf5a 100644 --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550ve-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550ve_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi index 97b1c18aa7d8..6426b431616b 100644 --- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550vs-c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_c_temp_alarm>; @@ -31,7 +30,6 @@ pm8550vs-d-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_d_temp_alarm>; @@ -52,7 +50,6 @@ pm8550vs-e-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_e_temp_alarm>; @@ -73,7 +70,6 @@ pm8550vs-g-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_g_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 4b2e8fb47d2d..f8e4829ff7f7 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -4,8 +4,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> -&spmi_bus { +/ { + thermal-zones { + pm8916-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8916_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; +&spmi_bus { pm8916_0: pmic@0 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index 1067e141be6c..64258505f9ba 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -9,9 +9,6 @@ / { thermal-zones { pm8953-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8953_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index d44a95caf04a..353e4a6bd088 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -8,7 +8,6 @@ thermal-zones { pm8994-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm8994_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 3f82715392c6..3ecb330590e5 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -11,7 +11,6 @@ thermal-zones { pm8998-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm8998_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi index 94d53b1cf6c8..8c899d148e46 100644 --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -11,7 +11,6 @@ thermal-zones { pmi632-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmi632_temp>; @@ -200,5 +199,11 @@ status = "disabled"; }; + + pmi632_vib: vibrator@5700 { + compatible = "qcom,pmi632-vib"; + reg = <0x5700>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 1029f3b1bb9a..b4822cb17a37 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -84,6 +84,14 @@ #address-cells = <1>; #size-cells = <0>; + pmi8950_pwm: pwm@b000 { + compatible = "qcom,pmi8950-pwm"; + reg = <0xb000 0x100>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8950_wled: leds@d800 { compatible = "qcom,pmi8950-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index dbd4b91dfe06..5084de66fc46 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -12,7 +12,6 @@ thermal-zones { pmm8155au-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmm8155au_1_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index 1cee20ac2c9c..555e4a456ef1 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -11,7 +11,6 @@ thermal-zones { pmm8155au-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmm8155au_2_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi index febda50779f9..f8efd8e5e68f 100644 --- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi @@ -36,7 +36,7 @@ thermal-zones { pmr735a_thermal: pmr735a-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi index f7473e247322..09affc05b397 100644 --- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi @@ -10,7 +10,7 @@ thermal-zones { pmr735b_thermal: pmr735b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi index 37daaefe3431..f9f1793d310e 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmr735d-k-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmr735d_k_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi index 3b470f6ac46f..d91fbd3bff10 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmr735d-l-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmr735d_l_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 461ad97032f7..3f9100c7eff4 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -12,7 +12,6 @@ thermal-zones { pms405-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pms405_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi index 373e45f63dff..2e61b7849c92 100644 --- a/arch/arm64/boot/dts/qcom/pmx75.dtsi +++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmx75-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmx75_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index 106110a9f551..8f3be4c75db3 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,qcm2290-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -758,6 +759,11 @@ reg = <0x25b 0x1>; bits = <1 4>; }; + + gpu_speed_bin: gpu-speed-bin@2006 { + reg = <0x2006 0x2>; + bits = <5 8>; + }; }; pmu@1b8e300 { @@ -1425,6 +1431,154 @@ }; }; + gpu: gpu@5900000 { + compatible = "qcom,adreno-07000200", "qcom,adreno"; + reg = <0x0 0x05900000 0x0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_BIMC_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "gmu", + "xo"; + + interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "gfx-mem"; + + iommus = <&adreno_smmu 0 1>, + <&adreno_smmu 2 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + qcom,gmu = <&gmu_wrapper>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; + + status = "disabled"; + + zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */ + opp-1123200000 { + opp-hz = /bits/ 64 <1123200000>; + required-opps = <&rpmpd_opp_turbo_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + required-opps = <&rpmpd_opp_turbo>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-921600000 { + opp-hz = /bits/ 64 <921600000>; + required-opps = <&rpmpd_opp_nom_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + }; + + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x7>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <3879000>; + opp-supported-hw = <0xf>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <2929000>; + opp-supported-hw = <0xf>; + }; + + opp-355200000 { + opp-hz = /bits/ 64 <355200000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <1720000>; + opp-supported-hw = <0xf>; + }; + }; + }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0 0x0596a000 0x0 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,qcm2290-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + power-domains = <&rpmpd QCM2290_VDDCX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; @@ -1924,9 +2078,6 @@ thermal-zones { mapss-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -1951,9 +2102,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -1978,9 +2126,6 @@ }; wlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -2005,9 +2150,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -2032,9 +2174,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -2059,9 +2198,6 @@ }; mdm0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -2086,9 +2222,6 @@ }; mdm1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -2113,9 +2246,6 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -2140,9 +2270,6 @@ }; hm-center-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2167,9 +2294,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index f3432701945f..8ab30c01712e 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -167,7 +167,7 @@ thermal-zones { camera-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -181,7 +181,7 @@ chg-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -195,7 +195,7 @@ conn-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -207,9 +207,28 @@ }; }; + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + quiet-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -223,7 +242,7 @@ rear-cam-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -237,7 +256,7 @@ sdm-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -251,7 +270,7 @@ xo-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -271,46 +290,54 @@ qcom,pmic-id = "b"; vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; regulator-min-microvolt = <1840000>; regulator-max-microvolt = <2040000>; }; vreg_s7b: smps7 { + regulator-name = "vreg_s7b"; regulator-min-microvolt = <535000>; regulator-max-microvolt = <1120000>; }; vreg_s8b: smps8 { + regulator-name = "vreg_s8b"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; }; vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; regulator-min-microvolt = <825000>; regulator-max-microvolt = <925000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; regulator-min-microvolt = <312000>; regulator-max-microvolt = <910000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; /* Constrained for UFS VCC, at least until UFS driver scales voltage */ regulator-min-microvolt = <2952000>; regulator-max-microvolt = <2952000>; @@ -318,66 +345,77 @@ }; vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; regulator-min-microvolt = <870000>; regulator-max-microvolt = <970000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; regulator-min-microvolt = <765000>; regulator-max-microvolt = <1020000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -389,60 +427,70 @@ qcom,pmic-id = "c"; vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; regulator-min-microvolt = <2190000>; regulator-max-microvolt = <2210000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s9c: smps9 { + regulator-name = "vreg_s9c"; regulator-min-microvolt = <1010000>; regulator-max-microvolt = <1170000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3400000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -451,36 +499,42 @@ }; vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c: ldo11 { + regulator-name = "vreg_l11c"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -522,7 +576,76 @@ &i2c1 { status = "okay"; - /* PM8008 PMIC @ 8 and 9 */ + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&pm8350c_gpios 3 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s1b>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + /* Pixelworks @ 26 */ /* FSA4480 USB audio switch @ 42 */ /* AW86927FCR haptics @ 5a */ @@ -551,7 +674,7 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt"; + firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mbn"; status = "okay"; }; @@ -653,6 +776,14 @@ }; }; +&pm8350c_gpios { + pm8008_reset_n_default: pm8008-reset-n-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-down; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -810,6 +941,13 @@ bias-pull-up; }; + pm8008_int_default: pm8008-int-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; @@ -864,7 +1002,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 47ca2d000341..a0668f767e4b 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -658,7 +658,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -667,6 +666,7 @@ }; &usb_1_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts new file mode 100644 index 000000000000..4667e47a74bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -0,0 +1,961 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com> + * Copyright (c) 2024, Caleb Connolly <caleb@postmarketos.org> + */ + +/dts-v1/; + +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &rmtfs_mem; + +/ { + model = "SHIFT SHIFTphone 8"; + compatible = "shift,otter", "qcom,qcm6490"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_down_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + reserved-memory { + cont_splash_mem: cont-splash@e1000000 { + reg = <0x0 0xe1000000 0x0 0x2300000>; + no-map; + }; + + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + rmtfs_mem: rmtfs@f8500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8500000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>; + }; + }; + + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b: smps7 { + regulator-name = "vreg_s7b"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b: smps8 { + regulator-name = "vreg_s8b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + /* Constrained for UFS VCC, at least until UFS driver scales voltage */ + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9c: smps9 { + regulator-name = "vreg_s9c"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c: ldo11 { + regulator-name = "vreg_l11c"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_EDP_CLKREF_EN>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn"; +}; + +&i2c1 { + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* rtc6226 FM receiver @ 64 */ + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + /* tas2563 audio codec @ 4d */ +}; + +&i2c9 { + status = "okay"; + + /* TMS(?) NFC @ 28 */ + /* Ti drv2624 haptics @ 5a */ +}; + +&i2c13 { + status = "okay"; + + /* focaltech FT3658U @ 38 */ +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn"; + status = "okay"; +}; + +&pm7250b_adc { + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm7325_gpios { + volume_down_default: volume-down-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + cam-flash-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wide-rfc-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + status = "okay"; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_xo_therm"; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@145 { + reg = <PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_cam_flash_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; + + channel@147 { + reg = <PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_wide_rfc_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn"; + status = "okay"; +}; + +&sdc2_clk { + drive-strength = <16>; + bias-disable; +}; + +&sdc2_cmd { + drive-strength = <10>; + bias-pull-up; +}; + +&sdc2_data { + drive-strength = <10>; + bias-pull-up; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + + status = "okay"; +}; + +&tlmm { + /* + * 48-52: protected by XPU, not sure why. + */ + gpio-reserved-ranges = <48 4>; + + bluetooth_enable_default: bluetooth-enable-default-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + + pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_l19b>; + vddaon-supply = <&vreg_s7b>; + vddbtcxmx-supply = <&vreg_s7b>; + vddrfacmn-supply = <&vreg_s7b>; + vddrfa0p8-supply = <&vreg_s7b>; + vddrfa1p7-supply = <&vreg_s1b>; + vddrfa1p2-supply = <&vreg_s8b>; + vddrfa2p2-supply = <&vreg_s1c>; + vddasd-supply = <&vreg_l11c>; + + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b>; + vcc-max-microamp = <800000>; + /* + * Technically l9b enables an eLDO (supplied by s1b) which then powers + * VCCQ2 of the UFS. + */ + vccq-supply = <&vreg_l9b>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c>; + vdda-pll-supply = <&vreg_l6b>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l2b>; + + qcom,hs-crossover-voltage-microvolt = <28000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-rise-fall-time-bp = <5430>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <2430>; + + qcom,pre-emphasis-amplitude-bp = <20000>; + qcom,pre-emphasis-duration-bp = <20000>; + + qcom,squelch-detector-bp = <(-2090)>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l1b>; + + status = "okay"; +}; + +&wifi { + qcom,ath11k-calibration-variant = "SHIFTphone_8"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index ac451f378056..c291bbed6073 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1324,7 +1324,7 @@ }; apcs_hfpll: clock-controller@b016000 { - compatible = "qcom,hfpll"; + compatible = "qcom,qcs404-hfpll"; reg = <0x0b016000 0x30>; #clock-cells = <0>; clock-output-names = "apcs_hfpll"; @@ -1531,10 +1531,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 0xff08>, - <GIC_PPI 3 0xff08>, - <GIC_PPI 4 0xff08>, - <GIC_PPI 1 0xff08>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; smp2p-adsp { @@ -1600,7 +1600,6 @@ thermal-zones { aoss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -1615,7 +1614,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -1630,7 +1628,6 @@ lpass-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -1645,7 +1642,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -1660,7 +1656,6 @@ cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -1694,7 +1689,6 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -1728,7 +1722,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -1762,7 +1755,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -1796,7 +1788,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -1830,7 +1821,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index a085ff5b5fb2..0d45662b8028 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -52,6 +52,25 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -530,6 +549,54 @@ <GCC_WPSS_RSCP_CLK>; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <&vreg_l11c_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + &i2c1 { status = "okay"; @@ -587,6 +654,21 @@ remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + status = "okay"; +}; + &mdss_edp { status = "okay"; }; @@ -602,10 +684,18 @@ status = "okay"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/qcs6490/adsp.mbn"; status = "okay"; @@ -632,7 +722,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -711,3 +800,23 @@ function = "gpio"; bias-disable; }; + +&pm7250b_gpios { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio2"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&tlmm { + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts new file mode 100644 index 000000000000..2e2e46f214c7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "qcs8550-aim300.dtsi" +#include "pm8010.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; + compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", + "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + debounce-interval = <15>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + }; + + regulators-3 { + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + }; + + regulators-4 { + vdd-s4-supply = <&vph_pwr>; + }; + + regulators-5 { + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + }; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + + typec-retimer@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0 { + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&dsi_active>, <&te_default>; + pinctrl-1 = <&dsi_suspend>, <&te_default>; + pinctrl-names = "default", "sleep"; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8550/adsp.mbn", + "qcom/qcs8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8550/cdsp.mbn", + "qcom/qcs8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&swr2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + dsi_active: dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + dsi_suspend: dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te_default: te-default-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_dp_qmpphy { + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi new file mode 100644 index 000000000000..f6960e2d466a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcs8550.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; +}; + +&pcie0 { + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; +}; + +&pcie1 { + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p9>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_hsphy { + phys = <&pm8550b_eusb2_repeater>; + + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi new file mode 100644 index 000000000000..07b314834d88 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sm8550.dtsi" + +/delete-node/ &reserved_memory; + +/ { + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + + /* These are 3 types of reserved memory regions here: + * 1. Firmware related regions which aren't shared with kernel. + * The device tree source in kernel doesn't need to have node to + * indicate the firmware related reserved information. Bootloader + * conveys the information by updating devicetree at runtime. + * This will be described as: UEFI saves the physical address of + * the UEFI System Table to dts file's chosen node. Kernel read this + * table and add reserved memory regions to efi config table. Current + * reserved memory region may have reserved region which was not yet + * used, release note of the firmware have such kind of information. + * 2. Firmware related memory regions which are shared with Kernel + * The device tree source in the kernel needs to include nodes + * that indicate fimware-related shared information. A label name + * is suggested because this type of shared information needs to + * be referenced by specific drivers for handling purposes. + * Unlike previous platforms, QCS8550 boots using EFI and describes + * most reserved regions in the ESRT memory map. As a result, reserved + * memory regions which aren't relevant to the kernel(like the hypervisor + ( region) don't need to be described in DT. + * 3. Remoteproc regions. + * Remoteproc regions will be reserved and then assigned to + * subsystem firmware later. + * Here is a reserved memory map for this platform: + * 0x80000000 +-------------------+ + * | | + * | Firmware Related | + * | | + * 0x8a800000 +-------------------+ + * | | + * | Remoteproc Region | + * | | + * 0xa7000000 +-------------------+ + * | | + * | Kernel Available | + * | | + * 0xd4d00000 +-------------------+ + * | | + * | Firmware Related | + * | | + * 0x100000000 +-------------------+ + */ + + aop_image_mem: aop-image-region@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config-region@81c80000 { + no-map; + reg = <0x0 0x81c80000 0x0 0x20000>; + }; + + smem_mem: smem-region@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0x0 0x81f00000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss-region@8a800000 { + reg = <0x0 0x8a800000 0x0 0x10800000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { + reg = <0x0 0x9b000000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9b080000 { + reg = <0x0 0x9b080000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9b090000 { + reg = <0x0 0x9b090000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { + reg = <0x0 0x9b09a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: spss-region@9b100000 { + reg = <0x0 0x9b100000 0x0 0x180000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 { + reg = <0x0 0x9b280000 0x0 0x80000>; + no-map; + }; + + camera_mem: camera-region@9b300000 { + reg = <0x0 0x9b300000 0x0 0x800000>; + no-map; + }; + + video_mem: video-region@9bb00000 { + reg = <0x0 0x9bb00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp-region@9c200000 { + reg = <0x0 0x9c200000 0x0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0x0 0x9c900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { + reg = <0x0 0x9e900000 0x0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { + reg = <0x0 0x9e980000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x4080000>; + no-map; + }; + + mpss_dsm_mem: mpss_dsm_region@d4d00000 { + reg = <0x0 0xd4d00000 0x0 0x3300000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 5a25cdec969e..e65305f8136c 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -500,3 +500,26 @@ &uart7 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l8a_0p91>; + vdda18-supply = <&vreg_l14a_1p8>; + vdda33-supply = <&vreg_l2a_2p3>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l8a_0p91>; + vdda-pll-supply = <&vreg_l3a_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index f90f03fa6a24..642ca8f0236b 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/clock/qcom,qdu1000-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -913,6 +915,126 @@ }; }; + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,qdu1000-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x0 0x088e3000 0x0 0x120>; + #phy-cells = <0>; + + clocks =<&gcc GCC_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88e5000 { + compatible = "qcom,qdu1000-qmp-usb3-uni-phy"; + reg = <0x0 0x088e5000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB2_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,qdu1000-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>; + + interconnect-names = "usb-ddr", + "apps-usb"; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0xc0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, + <&usb_1_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,qdu1000-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; @@ -1478,6 +1600,21 @@ "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + + nvmem-cells = <&multi_chan_ddr>; + nvmem-cell-names = "multi-chan-ddr"; + }; + + sec_qfprom: efuse@221c8000 { + compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom"; + reg = <0 0x221c8000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + multi_chan_ddr: multi-chan-ddr@12b { + reg = <0x12b 0x1>; + bits = <0 2>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index bb5191422660..e19790464a11 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -59,6 +59,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -199,7 +210,15 @@ status = "okay"; }; -&i2c2 { +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; + }; +}; + +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 2c39bb1b97db..1888d99d398b 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -60,6 +60,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -190,7 +201,7 @@ }; }; -&i2c2 { +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; @@ -294,7 +305,7 @@ &pmi632_vbus { regulator-min-microamp = <500000>; - regulator-max-microamp = <3000000>; + regulator-max-microamp = <1000000>; status = "okay"; }; @@ -403,6 +414,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; }; vreg_l10a_1p8: l10 { diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index cd0db4f31d4a..ccff6cd73fdf 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -108,10 +108,69 @@ regulator-always-on; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; + thermal-zones { conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150b_adc_tm 0>; trips { @@ -124,8 +183,6 @@ }; pm8150l-pcb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 1>; trips { @@ -138,8 +195,6 @@ }; skin-msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 0>; trips { @@ -152,8 +207,6 @@ }; wifi-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 1>; trips { @@ -166,8 +219,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 0>; trips { @@ -734,6 +785,23 @@ vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie1 { status = "okay"; }; @@ -1303,6 +1371,14 @@ function = "gpio"; bias-pull-up; }; + + wlan_en_state: wlan-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; }; &uart6 { @@ -1311,17 +1387,12 @@ bluetooth { compatible = "qcom,qca6390-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_state>; - - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - - vddio-supply = <&vreg_s4a_1p8>; - vddpmu-supply = <&vreg_s2f_0p95>; - vddaon-supply = <&vreg_s6a_0p95>; - vddrfa0p9-supply = <&vreg_s2f_0p95>; - vddrfa1p3-supply = <&vreg_s8c_1p3>; - vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; @@ -1356,8 +1427,8 @@ usb-role-switch; }; -&usb_1_role_switch_out { - remote-endpoint = <&pm8150b_role_switch_in>; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; }; &usb_1_hsphy { @@ -1373,7 +1444,6 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; - orientation-switch; }; &usb_1_qmpphy_out { @@ -1465,8 +1535,8 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { - remote-endpoint = <&usb_1_role_switch_out>; + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts index 2a862c83309e..1c781d9e24cf 100644 --- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -467,3 +467,26 @@ &uart7 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l8a_0p91>; + vdda18-supply = <&vreg_l14a_1p8>; + vdda33-supply = <&vreg_l2a_2p3>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l8a_0p91>; + vdda-pll-supply = <&vreg_l3a_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi index ffb7ab695213..9e70effc72e1 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi @@ -38,3 +38,7 @@ */ compatible = "qcom,sa8155p-rpmhpd"; }; + +&videocc { + power-domains = <&rpmhpd SA8155P_CX>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index eaa43f022a65..1369c3d43f86 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -10,7 +10,7 @@ thermal-zones { pmm8654au_0_thermal: pm8775-0-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; trips { @@ -30,7 +30,7 @@ pmm8654au_1_thermal: pm8775-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; trips { @@ -50,7 +50,7 @@ pmm8654au_2_thermal: pm8775-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; trips { @@ -70,7 +70,7 @@ pmm8654au_3_thermal: pm8775-3-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts new file mode 100644 index 000000000000..ae065ae92478 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sa8775p-ride.dtsi" + +/ { + model = "Qualcomm SA8775P Ride Rev3"; + compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p"; +}; + +ðernet0 { + phy-mode = "2500base-x"; +}; + +ðernet1 { + phy-mode = "2500base-x"; +}; + +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + + sgmii_phy1: phy@0 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x0>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 26ad05bd3b3f..2e87fd760dbd 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,835 +5,43 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sa8775p.dtsi" -#include "sa8775p-pmics.dtsi" +#include "sa8775p-ride.dtsi" / { model = "Qualcomm SA8775P Ride"; compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; - - aliases { - ethernet0 = ðernet0; - ethernet1 = ðernet1; - i2c11 = &i2c11; - i2c18 = &i2c18; - serial0 = &uart10; - serial1 = &uart12; - serial2 = &uart17; - spi16 = &spi16; - ufshc1 = &ufs_mem_hc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1816000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s5a: smps5 { - regulator-name = "vreg_s5a"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1996000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <788000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - /* - * FIXME: This should have regulator-allow-set-load but - * we're getting an over-current fault from the PMIC - * when switching to LPM. - */ - }; - - vreg_l5c: ldo5 { - regulator-name = "vreg_l5c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2700000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "e"; - - vreg_s4e: smps4 { - regulator-name = "vreg_s4e"; - regulator-min-microvolt = <970000>; - regulator-max-microvolt = <1520000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s7e: smps7 { - regulator-name = "vreg_s7e"; - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9e: smps9 { - regulator-name = "vreg_s9e"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <570000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6e: ldo6 { - regulator-name = "vreg_l6e"; - regulator-min-microvolt = <1280000>; - regulator-max-microvolt = <1450000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8e: ldo8 { - regulator-name = "vreg_l8e"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; }; ðernet0 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy0>; - - pinctrl-0 = <ðernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,ps-speed = <1000>; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - - sgmii_phy1: phy@a { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0xa>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; }; ðernet1 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy1>; - - snps,mtl-rx-config = <&mtl_rx_setup1>; - snps,mtl-tx-config = <&mtl_tx_setup1>; - snps,ps-speed = <1000>; - - status = "okay"; - - mtl_rx_setup1: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup1: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; -}; - -&i2c11 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c11_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c18 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c18_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pmm8654au_0_gpios { - gpio-line-names = "DS_EN", - "POFF_COMPLETE", - "UFS0_VER_ID", - "FAST_POFF", - "DBU1_PON_DONE", - "AOSS_SLEEP", - "CAM_DES0_EN", - "CAM_DES1_EN", - "CAM_DES2_EN", - "CAM_DES3_EN", - "UEFI", - "ANALOG_PON_OPT"; -}; - -&pmm8654au_0_pon_resin { - linux,code = <KEY_VOLUMEDOWN>; - status = "okay"; -}; - -&pmm8654au_1_gpios { - gpio-line-names = "PMIC_C_ID0", - "PMIC_C_ID1", - "UFS1_VER_ID", - "IPA_PWR", - "", - "WLAN_DBU4_EN", - "WLAN_EN", - "BT_EN", - "USB2_PWR_EN", - "USB2_FAULT"; - - usb2_en_state: usb2-en-state { - pins = "gpio9"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_2_gpios { - gpio-line-names = "PMIC_E_ID0", - "PMIC_E_ID1", - "USB0_PWR_EN", - "USB0_FAULT", - "SENSOR_IRQ_1", - "SENSOR_IRQ_2", - "SENSOR_RST", - "SGMIIO0_RST", - "SGMIIO1_RST", - "USB1_PWR_ENABLE", - "USB1_FAULT", - "VMON_SPX8"; - - usb0_en_state: usb0-en-state { - pins = "gpio3"; - function = "normal"; - output-high; - power-source = <0>; - }; - - usb1_en_state: usb1-en-state { - pins = "gpio10"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_3_gpios { - gpio-line-names = "PMIC_G_ID0", - "PMIC_G_ID1", - "GNSS_RST", - "GNSS_EN", - "GNSS_BOOT_MODE"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_2 { - status = "okay"; -}; - -&serdes0 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&serdes1 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32764>; -}; - -&spi16 { - pinctrl-0 = <&qup_spi16_default>; - pinctrl-names = "default"; - status = "okay"; }; -&tlmm { - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio8"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio9"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - qup_uart10_default: qup-uart10-state { - pins = "gpio46", "gpio47"; - function = "qup1_se3"; - }; - - qup_spi16_default: qup-spi16-state { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - function = "qup2_se2"; - drive-strength = <6>; - bias-disable; - }; - - qup_i2c11_default: qup-i2c11-state { - pins = "gpio48", "gpio49"; - function = "qup1_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c18_default: qup-i2c18-state { - pins = "gpio95", "gpio96"; - function = "qup2_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_uart12_default: qup-uart12-state { - qup_uart12_cts: qup-uart12-cts-pins { - pins = "gpio52"; - function = "qup1_se5"; - bias-disable; - }; - - qup_uart12_rts: qup-uart12-rts-pins { - pins = "gpio53"; - function = "qup1_se5"; - bias-pull-down; - }; - - qup_uart12_tx: qup-uart12-tx-pins { - pins = "gpio54"; - function = "qup1_se5"; - bias-pull-up; - }; - - qup_uart12_rx: qup-uart12-rx-pins { - pins = "gpio55"; - function = "qup1_se5"; - bias-pull-down; - }; - }; - - qup_uart17_default: qup-uart17-state { - qup_uart17_cts: qup-uart17-cts-pins { - pins = "gpio91"; - function = "qup2_se3"; - bias-disable; - }; - - qup_uart17_rts: qup0-uart17-rts-pins { - pins = "gpio92"; - function = "qup2_se3"; - bias-pull-down; - }; - - qup_uart17_tx: qup0-uart17-tx-pins { - pins = "gpio93"; - function = "qup2_se3"; - bias-pull-up; - }; - - qup_uart17_rx: qup0-uart17-rx-pins { - pins = "gpio94"; - function = "qup2_se3"; - bias-pull-down; - }; - }; +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; - pcie0_default_state: pcie0-default-state { - perst-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio1"; - function = "pcie0_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio0"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; - pcie1_default_state: pcie1-default-state { - perst-pins { - pins = "gpio4"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio3"; - function = "pcie1_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; }; - -&pcie0 { - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - - status = "okay"; -}; - -&pcie1 { - perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&pcie1_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&uart10 { - compatible = "qcom,geni-debug-uart"; - pinctrl-0 = <&qup_uart10_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart12 { - pinctrl-0 = <&qup_uart12_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart17 { - pinctrl-0 = <&qup_uart17_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_en_state>; - - status = "okay"; -}; - -&usb_0_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_en_state>; - - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_2 { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_en_state>; - - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; -}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi new file mode 100644 index 000000000000..2a6170623ea9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c11 = &i2c11; + i2c18 = &i2c18; + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + spi16 = &spi16; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + phy-handle = <&sgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <1000>; + + status = "okay"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-handle = <&sgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <1000>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 1b3dc0ece54d..23f1b2e5e624 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -205,9 +205,23 @@ }; }; + dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = + <&swao_rep_out1>; + }; + }; + }; + }; + firmware { scm { compatible = "qcom,scm-sa8775p", "qcom,scm"; + memory-region = <&tz_ffi_mem>; }; }; @@ -418,6 +432,12 @@ no-map; }; + tz_ffi_mem: tz-ffi@91c00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x91c00000 0x0 0x1400000>; + no-map; + }; + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { reg = <0x0 0x93b00000 0x0 0xf00000>; no-map; @@ -1644,6 +1664,919 @@ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; }; + stm: stm@4002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x4002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + tpdm@4003000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4003000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm0_out: endpoint { + remote-endpoint = + <&qdss_tpda_in0>; + }; + }; + }; + }; + + tpda@4004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x4004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = + <&funnel0_in6>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + qdss_tpda_in0: endpoint { + remote-endpoint = + <&qdss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + qdss_tpda_in1: endpoint { + remote-endpoint = + <&qdss_tpdm1_out>; + }; + }; + }; + }; + + tpdm@400f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x400f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm1_out: endpoint { + remote-endpoint = + <&qdss_tpda_in1>; + }; + }; + }; + }; + + funnel@4041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&qdss_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel0_in6: endpoint { + remote-endpoint = + <&qdss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + }; + + funnel@4042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4042000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&qdss_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + }; + + funnel@4045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4045000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + qdss_funnel_out: endpoint { + remote-endpoint = + <&aoss_funnel_in7>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + qdss_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + qdss_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + funnel@4b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4b04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + aoss_funnel_out: endpoint { + remote-endpoint = + <&etf0_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + aoss_funnel_in6: endpoint { + remote-endpoint = + <&aoss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + aoss_funnel_in7: endpoint { + remote-endpoint = + <&qdss_funnel_out>; + }; + }; + }; + }; + + tmc_etf: tmc@4b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x4b05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf0_out: endpoint { + remote-endpoint = + <&swao_rep_in>; + }; + }; + }; + + in-ports { + port { + etf0_in: endpoint { + remote-endpoint = + <&aoss_funnel_out>; + }; + }; + }; + }; + + replicator@4b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x4b06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + swao_rep_out1: endpoint { + remote-endpoint = + <&eud_in>; + }; + }; + }; + + in-ports { + port { + swao_rep_in: endpoint { + remote-endpoint = + <&etf0_out>; + }; + }; + }; + }; + + tpda@4b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x4b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = + <&aoss_funnel_in6>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + aoss_tpda_in0: endpoint { + remote-endpoint = + <&aoss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + aoss_tpda_in1: endpoint { + remote-endpoint = + <&aoss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + aoss_tpda_in2: endpoint { + remote-endpoint = + <&aoss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + aoss_tpda_in3: endpoint { + remote-endpoint = + <&aoss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + aoss_tpda_in4: endpoint { + remote-endpoint = + <&aoss_tpdm4_out>; + }; + }; + }; + }; + + tpdm@4b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm0_out: endpoint { + remote-endpoint = + <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@4b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm1_out: endpoint { + remote-endpoint = + <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@4b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm2_out: endpoint { + remote-endpoint = + <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@4b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm3_out: endpoint { + remote-endpoint = + <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@4b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm4_out: endpoint { + remote-endpoint = + <&aoss_tpda_in4>; + }; + }; + }; + }; + + aoss_cti: cti@4b13000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x4b13000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@6040000 { + compatible = "arm,primecell"; + reg = <0x0 0x6040000 0x0 0x1000>; + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + etm@6140000 { + compatible = "arm,primecell"; + reg = <0x0 0x6140000 0x0 0x1000>; + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + etm@6240000 { + compatible = "arm,primecell"; + reg = <0x0 0x6240000 0x0 0x1000>; + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel0_in2>; + }; + }; + }; + }; + + etm@6340000 { + compatible = "arm,primecell"; + reg = <0x0 0x6340000 0x0 0x1000>; + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel0_in3>; + }; + }; + }; + }; + + etm@6440000 { + compatible = "arm,primecell"; + reg = <0x0 0x6440000 0x0 0x1000>; + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel0_in4>; + }; + }; + }; + }; + + etm@6540000 { + compatible = "arm,primecell"; + reg = <0x0 0x6540000 0x0 0x1000>; + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel0_in5>; + }; + }; + }; + }; + + etm@6640000 { + compatible = "arm,primecell"; + reg = <0x0 0x6640000 0x0 0x1000>; + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel0_in6>; + }; + }; + }; + }; + + etm@6740000 { + compatible = "arm,primecell"; + reg = <0x0 0x6740000 0x0 0x1000>; + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel0_in7>; + }; + }; + }; + }; + + funnel@6800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x6800000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel0_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel0_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel0_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel0_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel0_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel0_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@6810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x6810000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&funnel1_in4>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel1_in3: endpoint { + remote-endpoint = + <&apss_tpda_out>; + }; + }; + }; + }; + + tpdm@6860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x6860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm3_out: endpoint { + remote-endpoint = + <&apss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6861000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x6861000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm4_out: endpoint { + remote-endpoint = + <&apss_tpda_in4>; + }; + }; + }; + }; + + tpda@6863000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x6863000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_tpda_out: endpoint { + remote-endpoint = + <&apss_funnel1_in3>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_tpda_in0: endpoint { + remote-endpoint = + <&apss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_tpda_in1: endpoint { + remote-endpoint = + <&apss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_tpda_in2: endpoint { + remote-endpoint = + <&apss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_tpda_in3: endpoint { + remote-endpoint = + <&apss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_tpda_in4: endpoint { + remote-endpoint = + <&apss_tpdm4_out>; + }; + }; + }; + }; + + tpdm@68a0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68a0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm0_out: endpoint { + remote-endpoint = + <&apss_tpda_in0>; + }; + }; + }; + }; + + tpdm@68b0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68b0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm1_out: endpoint { + remote-endpoint = + <&apss_tpda_in1>; + }; + }; + }; + }; + + tpdm@68c0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68c0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm2_out: endpoint { + remote-endpoint = + <&apss_tpda_in2>; + }; + }; + }; + }; + usb_0_hsphy: phy@88e4000 { compatible = "qcom,sa8775p-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -1959,6 +2892,25 @@ status = "disabled"; }; + llcc: system-cache-controller@9200000 { + compatible = "qcom,sa8775p-llcc"; + reg = <0x0 0x09200000 0x0 0x80000>, + <0x0 0x09300000 0x0 0x80000>, + <0x0 0x09400000 0x0 0x80000>, + <0x0 0x09500000 0x0 0x80000>, + <0x0 0x09600000 0x0 0x80000>, + <0x0 0x09700000 0x0 0x80000>, + <0x0 0x09a00000 0x0 0x80000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -2099,6 +3051,20 @@ wakeup-parent = <&pdc>; }; + sram: sram@146d8000 { + compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd"; + reg = <0x0 0x146d8000 0x0 0x1000>; + ranges = <0x0 0x0 0x146d8000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; @@ -2504,6 +3470,7 @@ phy-names = "serdes"; iommus = <&apps_smmu 0x140 0xf>; + dma-coherent; snps,tso; snps,pbl = <32>; @@ -2538,6 +3505,7 @@ phy-names = "serdes"; iommus = <&apps_smmu 0x120 0xf>; + dma-coherent; snps,tso; snps,pbl = <32>; @@ -2550,9 +3518,6 @@ thermal-zones { aoss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -2572,7 +3537,6 @@ cpu-0-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -2593,7 +3557,6 @@ cpu-0-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -2614,7 +3577,6 @@ cpu-0-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -2635,7 +3597,6 @@ cpu-0-3-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -2656,7 +3617,6 @@ gpuss-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -2677,7 +3637,6 @@ gpuss-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -2698,7 +3657,6 @@ gpuss-2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -2718,9 +3676,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2739,9 +3694,6 @@ }; camss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -2760,9 +3712,6 @@ }; pcie-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -2781,9 +3730,6 @@ }; cpuss-0-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -2802,9 +3748,6 @@ }; aoss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2824,7 +3767,6 @@ cpu-0-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -2845,7 +3787,6 @@ cpu-0-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -2866,7 +3807,6 @@ cpu-0-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -2887,7 +3827,6 @@ cpu-0-3-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -2908,7 +3847,6 @@ gpuss-3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -2929,7 +3867,6 @@ gpuss-4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -2950,7 +3887,6 @@ gpuss-5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -2970,9 +3906,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -2991,9 +3924,6 @@ }; camss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -3012,9 +3942,6 @@ }; pcie-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -3033,9 +3960,6 @@ }; cpuss-0-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { @@ -3054,9 +3978,6 @@ }; aoss-2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 0>; trips { @@ -3076,7 +3997,6 @@ cpu-1-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 1>; @@ -3097,7 +4017,6 @@ cpu-1-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 2>; @@ -3118,7 +4037,6 @@ cpu-1-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 3>; @@ -3139,7 +4057,6 @@ cpu-1-3-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 4>; @@ -3160,7 +4077,6 @@ nsp-0-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 5>; @@ -3181,7 +4097,6 @@ nsp-0-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 6>; @@ -3202,7 +4117,6 @@ nsp-0-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 7>; @@ -3223,7 +4137,6 @@ nsp-1-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 8>; @@ -3244,7 +4157,6 @@ nsp-1-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 9>; @@ -3265,7 +4177,6 @@ nsp-1-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 10>; @@ -3285,9 +4196,6 @@ }; ddrss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 11>; trips { @@ -3306,9 +4214,6 @@ }; cpuss-1-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 12>; trips { @@ -3327,9 +4232,6 @@ }; aoss-3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 0>; trips { @@ -3349,7 +4251,6 @@ cpu-1-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 1>; @@ -3370,7 +4271,6 @@ cpu-1-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 2>; @@ -3391,7 +4291,6 @@ cpu-1-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 3>; @@ -3412,7 +4311,6 @@ cpu-1-3-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 4>; @@ -3433,7 +4331,6 @@ nsp-0-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 5>; @@ -3454,7 +4351,6 @@ nsp-0-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 6>; @@ -3475,7 +4371,6 @@ nsp-0-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 7>; @@ -3496,7 +4391,6 @@ nsp-1-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 8>; @@ -3517,7 +4411,6 @@ nsp-1-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 9>; @@ -3538,7 +4431,6 @@ nsp-1-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 10>; @@ -3558,9 +4450,6 @@ }; ddrss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 11>; trips { @@ -3579,9 +4468,6 @@ }; cpuss-1-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 12>; trips { @@ -3689,6 +4575,53 @@ }; }; + pcie0_ep: pcie-ep@1c00000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40200000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>, + <0x0 0x40005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x0000 0x7f>; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_0_GDSC>; + phys = <&pcie0_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <2>; + + status = "disabled"; + }; + pcie0_phy: phy@1c04000 { compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; reg = <0x0 0x1c04000 0x0 0x2000>; @@ -3799,6 +4732,53 @@ }; }; + pcie1_ep: pcie-ep@1c10000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60200000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>, + <0x0 0x60005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x80 0x7f>; + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_1_GDSC>; + phys = <&pcie1_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <4>; + + status = "disabled"; + }; + pcie1_phy: phy@1c14000 { compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; reg = <0x0 0x1c14000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi new file mode 100644 index 000000000000..d91533b80e76 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for clamshells + * + * Copyright 2024 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 7765c8f64905..3c124bbe2f4c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -7,6 +7,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-detachable.dtsi" /* Deleted nodes from sc7180-trogdor.dtsi */ @@ -25,7 +26,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -80,10 +80,6 @@ }; &cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; - cros_ec_proximity: proximity { compatible = "google,cros-ec-mkbp-proximity"; label = "proximity-wifi"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi new file mode 100644 index 000000000000..7c5d8a57ef7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for detachables + * + * Copyright 2024 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */ +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index 2ba3bbf3b9ad..b2df22faafe8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -5,9 +5,8 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ - #include "sc7180-trogdor-rt5682i-sku.dtsi" +#include "sc7180-trogdor-detachable.dtsi" / { /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -45,7 +44,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -135,12 +133,6 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - &panel { compatible = "samsung,atna33xc20"; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index d6db7d83adcf..655bea928e52 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -9,7 +9,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" #include "sc7180-trogdor-rt5682s-sku.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts index 919bfaea6189..340cb119d0a0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -12,6 +12,6 @@ compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index eb20157f6af9..d45e60e3eb9e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -17,6 +17,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts index 45d34718a1bc..e906ce877b8c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts @@ -18,6 +18,6 @@ compatible = "google,lazor-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts index 79028d0dd1b0..4b9ee15b09f6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts @@ -22,6 +22,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index 3459b81c5628..a960553f3994 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -21,6 +21,6 @@ "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index ff8f47da109d..82bd9ed7e21a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -25,6 +25,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts index faf527972977..6278c1715d3f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -18,6 +18,6 @@ compatible = "google,lazor-rev9-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts index d737fd0637fb..0ec1697ae2c9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -22,6 +22,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index e9f213d27711..c3fd6760de7a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -5,8 +5,7 @@ * Copyright 2020 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" &ap_sar_sensor { semtech,cs0-ground; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index 8823edbb4d6e..cc2c5610a279 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -5,8 +5,7 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" &ap_sar_sensor { compatible = "semtech,sx9324"; @@ -83,6 +82,8 @@ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + &en_pp3300_dx_edp { pins = "gpio67"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 067813f5f437..ac8d4589e3fb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -6,17 +6,13 @@ */ #include "sc7180-trogdor.dtsi" -/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { thermal-zones { 5v-choke-thermal { - polling-delay-passive = <0>; - polling-delay = <250>; - thermal-sensors = <&pm6150_adc_tm 1>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 5f06842c683b..00229b1515e6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -9,9 +9,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; +#include "sc7180-trogdor-detachable.dtsi" / { ppvar_lcd: ppvar-lcd-regulator { @@ -47,12 +45,6 @@ status = "okay"; }; -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - &gpio_keys { status = "okay"; }; @@ -136,6 +128,11 @@ pp3300_disp_on: &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; +/* This board only has 1 USB Type-C port. */ +&usb_c1 { + status = "disabled"; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ /* diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index c9667751a990..d393a2712ce6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -8,8 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" -/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 305ad127246e..af89d80426ab 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-detachable.dtsi" / { avdd_lcd: avdd-lcd-regulator { @@ -50,7 +51,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <574>; @@ -104,10 +104,6 @@ base_detection: cbas { compatible = "google,cros-cbas"; }; - - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 8513be297120..74ab321d3333 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -21,9 +21,6 @@ / { thermal-zones { charger_thermal: charger-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150_adc_tm 0>; trips { @@ -359,10 +356,11 @@ #sound-dai-cells = <0>; }; - pwmleds { + pwmleds: pwmleds { compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: led-0 { - status = "disabled"; label = "cros_ec::kbd_backlight"; function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 4774a859bd7e..b5ebf8980325 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1582,8 +1582,7 @@ }; ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sc7180-qmp-ufs-phy", - "qcom,sm7150-qmp-ufs-phy"; + compatible = "qcom,sc7180-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, @@ -3067,6 +3066,7 @@ iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; @@ -4036,7 +4036,6 @@ thermal-zones { cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; sustainable-power = <1052>; @@ -4085,7 +4084,6 @@ cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; sustainable-power = <1052>; @@ -4134,7 +4132,6 @@ cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; sustainable-power = <1052>; @@ -4183,7 +4180,6 @@ cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; sustainable-power = <1052>; @@ -4232,7 +4228,6 @@ cpu4_thermal: cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; sustainable-power = <1052>; @@ -4281,7 +4276,6 @@ cpu5_thermal: cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; sustainable-power = <1052>; @@ -4330,7 +4324,6 @@ cpu6_thermal: cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; sustainable-power = <1425>; @@ -4371,7 +4364,6 @@ cpu7_thermal: cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; sustainable-power = <1425>; @@ -4412,7 +4404,6 @@ cpu8_thermal: cpu8-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; sustainable-power = <1425>; @@ -4453,7 +4444,6 @@ cpu9_thermal: cpu9-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; sustainable-power = <1425>; @@ -4494,7 +4484,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -4515,7 +4504,6 @@ cpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -4535,7 +4523,6 @@ cpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -4555,7 +4542,6 @@ gpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; @@ -4583,7 +4569,6 @@ gpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; @@ -4611,7 +4596,6 @@ aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -4632,7 +4616,6 @@ cwlan-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -4653,7 +4636,6 @@ audio-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -4674,7 +4656,6 @@ ddr-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -4695,7 +4676,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -4716,7 +4696,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -4737,7 +4716,6 @@ mdm-core-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -4758,7 +4736,6 @@ mdm-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -4779,7 +4756,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; @@ -4800,7 +4776,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 9>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index a0059527d9e4..7370aa0dbf0e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -495,7 +495,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index f9b96bd2477e..7d1d5bbbbbd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -427,7 +427,6 @@ }; uart_dbg: &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index fc9ec367e3a5..3d8410683402 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -24,6 +24,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,lpass.h> #include <dt-bindings/thermal/thermal.h> @@ -710,6 +711,7 @@ firmware { scm: scm { compatible = "qcom,scm-sc7280", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; @@ -1440,12 +1442,12 @@ }; uart5: serial@994000 { - compatible = "qcom,geni-uart"; + compatible = "qcom,geni-debug-uart"; reg = <0 0x00994000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7280_CX>; operating-points-v2 = <&qup_opp_table>; @@ -2129,6 +2131,8 @@ reg = <0 0x016e0000 0 0x1c080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; }; aggre2_noc: interconnect@1700000 { @@ -2136,6 +2140,7 @@ compatible = "qcom,sc7280-aggre2-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; }; mmss_noc: interconnect@1740000 { @@ -2989,6 +2994,18 @@ dma-coherent; }; + gfx_0_tbu: tbu@3dd9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3dd9000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; + }; + + gfx_1_tbu: tbu@3ddd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3ddd000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; reg = <0 0x04080000 0 0x10000>; @@ -3762,6 +3779,75 @@ label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -4150,6 +4236,7 @@ iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; @@ -5407,16 +5494,6 @@ function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts-state { - pins = "gpio20"; - function = "qup05"; - }; - - qup_uart5_rts: qup-uart5-rts-state { - pins = "gpio21"; - function = "qup05"; - }; - qup_uart5_tx: qup-uart5-tx-state { pins = "gpio22"; function = "qup05"; @@ -5802,6 +5879,83 @@ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@151dd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151dd000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@151e1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e1000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@151e5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@151e9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e9000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + compute_dsp_1_tbu: tbu@151ed000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151ed000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_0_tbu: tbu@151f1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f1000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@151f5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f5000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@151f9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f9000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@151fd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151fd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0 0x17a00000 0 0x10000>, /* GICD */ @@ -5991,10 +6145,12 @@ }; }; + sound: sound { + }; + thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -6038,7 +6194,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -6082,7 +6237,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -6126,7 +6280,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -6170,7 +6323,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -6214,7 +6366,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -6258,7 +6409,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; @@ -6302,7 +6452,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; @@ -6346,7 +6495,6 @@ cpu8-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; @@ -6390,7 +6538,6 @@ cpu9-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; @@ -6434,7 +6581,6 @@ cpu10-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; @@ -6478,7 +6624,6 @@ cpu11-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; @@ -6522,7 +6667,6 @@ aoss0-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -6543,7 +6687,6 @@ aoss1-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -6564,7 +6707,6 @@ cpuss0-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -6584,7 +6726,6 @@ cpuss1-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -6604,7 +6745,6 @@ gpuss0-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -6632,7 +6772,6 @@ gpuss1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -6659,9 +6798,6 @@ }; nspss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -6680,9 +6816,6 @@ }; nspss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -6701,9 +6834,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -6722,9 +6852,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -6743,9 +6870,6 @@ }; mdmss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -6764,9 +6888,6 @@ }; mdmss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -6785,9 +6906,6 @@ }; mdmss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -6806,9 +6924,6 @@ }; mdmss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -6827,9 +6942,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 6af99116c715..5b226577f9d8 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -68,7 +68,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -103,7 +103,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -582,6 +582,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -590,8 +594,8 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; }; &usb_sec_hsphy { @@ -619,10 +623,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi index ddc84282f142..1c6f12fafe1d 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -13,7 +13,6 @@ thermal-zones { pmc8180-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmc8180_temp>; @@ -40,7 +39,6 @@ pmc8180c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmc8180c_temp>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index bfee60c93ccc..65d923497a05 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -71,7 +71,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -106,7 +106,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -648,6 +648,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -656,10 +660,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -685,10 +685,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; @@ -697,6 +693,10 @@ dr_mode = "host"; }; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &wifi { memory-region = <&wlan_mem>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 581a70c34fd2..6e707d993aeb 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8180x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -1890,7 +1891,7 @@ power-domains = <&gcc PCIE_3_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie3_phy>; @@ -2012,7 +2013,7 @@ power-domains = <&gcc PCIE_1_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie1_phy>; @@ -2134,7 +2135,7 @@ power-domains = <&gcc PCIE_2_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie2_phy>; @@ -2245,18 +2246,13 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; + power-domains = <&gcc UFS_PHY_GDSC>; + #phy-cells = <0>; status = "disabled"; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sc8180x-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -2511,28 +2507,25 @@ status = "disabled"; }; - usb_prim_qmpphy: phy@88e9000 { + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; - reg-names = "reg-base", "dp_com"; + reg = <0 0x088e8000 0 0x3000>; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "aux", - "ref_clk_src", "ref", - "com_aux"; + "com_aux", + "usb3_pipe"; + resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>, <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; reset-names = "phy", "common"; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #phy-cells = <1>; status = "disabled"; @@ -2546,59 +2539,40 @@ usb_prim_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_prim_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_prim_dwc3_ss>; + }; + }; + port@2 { reg = <2>; usb_prim_qmpphy_dp_in: endpoint {}; }; }; - - usb_prim_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_prim_phy_pipe_clk_src"; - }; - - usb_prim_dpphy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; usb_sec_qmpphy: phy@88ee000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; - reg = <0 0x088ee000 0 0x18c>, - <0 0x088ed000 0 0x10>, - <0 0x088ef000 0 0x40>; - reg-names = "reg-base", "dp_com"; + reg = <0 0x088ed000 0 0x3000>; + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "aux", - "ref_clk_src", "ref", - "com_aux"; + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>, <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #phy-cells = <1>; status = "disabled"; @@ -2612,37 +2586,20 @@ usb_sec_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_sec_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_sec_dwc3_ss>; + }; + }; + port@2 { reg = <2>; usb_sec_qmpphy_dp_in: endpoint {}; }; }; - - usb_sec_ssphy: usb3-phy@88e9200 { - reg = <0 0x088ee200 0 0x200>, - <0 0x088ee400 0 0x200>, - <0 0x088eec00 0 0x218>, - <0 0x088ee600 0 0x200>, - <0 0x088ee800 0 0x200>, - <0 0x088eea00 0 0x100>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_sec_phy_pipe_clk_src"; - }; - - usb_sec_dpphy: dp-phy@88ef200 { - reg = <0 0x088ef200 0 0x200>, - <0 0x088ef400 0 0x200>, - <0 0x088efa00 0 0x200>, - <0 0x088ef600 0 0x200>, - <0 0x088ef800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - clock-output-names = "qmp_dptx1_phy_pll_link_clk", - "qmp_dptx1_phy_pll_vco_div_clk"; - }; }; system-cache-controller@9200000 { @@ -2714,11 +2671,26 @@ iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; + phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_prim_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_prim_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_prim_dwc3_ss: endpoint { + remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>; + }; }; }; }; @@ -2771,11 +2743,26 @@ iommus = <&apps_smmu 0x160 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; + phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_sec_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_sec_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_sec_dwc3_ss: endpoint { + remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3089,9 +3076,10 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>; + assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_prim_dpphy>; + phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; @@ -3166,9 +3154,10 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>; - assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>; + assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_sec_dpphy>; + phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; @@ -3311,21 +3300,27 @@ compatible = "qcom,sc8180x-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&sleep_clk>, - <&usb_prim_dpphy 0>, - <&usb_prim_dpphy 1>, - <&usb_sec_dpphy 0>, - <&usb_sec_dpphy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&edp_phy 0>, - <&edp_phy 1>; + <&edp_phy 1>, + <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", - "sleep_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk", - "dptx1_phy_pll_link_clk", - "dptx1_phy_pll_vco_div_clk", "edp_phy_pll_link_clk", - "edp_phy_pll_vco_div_clk"; + "edp_phy_pll_vco_div_clk", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SC8180X_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; @@ -3371,7 +3366,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; }; sram@c3f0000 { @@ -3774,7 +3768,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3789,7 +3782,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3804,7 +3796,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3819,7 +3810,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -3834,7 +3824,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3849,7 +3838,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3864,7 +3852,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -3879,7 +3866,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -3894,7 +3880,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -3909,7 +3894,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -3924,7 +3908,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -3939,7 +3922,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -3954,7 +3936,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -3969,7 +3950,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -3984,7 +3964,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -3999,7 +3978,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -4012,16 +3990,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -4036,7 +4025,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -4051,7 +4039,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -4066,7 +4053,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -4081,7 +4067,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -4096,7 +4081,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -4111,7 +4095,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -4126,7 +4109,6 @@ mdm-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -4141,7 +4123,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -4156,7 +4137,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -4169,10 +4149,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 372b35fb844f..b98b2f7752b5 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -56,7 +56,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -91,7 +91,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -675,6 +675,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -700,10 +704,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -712,6 +712,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -737,10 +741,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 4bf99b6b6e5f..b27143f81867 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -117,7 +117,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -152,7 +152,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -297,9 +297,30 @@ }; thermal-zones { + pm8008-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; trips { @@ -671,6 +692,85 @@ }; }; +&i2c11 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_default>; + + status = "okay"; + + pm8008: pmic@c { + compatible = "qcom,pm8008"; + reg = <0xc>; + + interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s11b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1q: ldo1 { + regulator-name = "vreg_l1q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2q: ldo2 { + regulator-name = "vreg_l2q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3q: ldo3 { + regulator-name = "vreg_l3q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4q: ldo4 { + regulator-name = "vreg_l4q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l5q: ldo5 { + regulator-name = "vreg_l5q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6q: ldo6 { + regulator-name = "vreg_l6q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7q: ldo7 { + regulator-name = "vreg_l7q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -1132,6 +1232,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -1157,10 +1261,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -1169,6 +1269,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -1194,10 +1298,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_2 { status = "okay"; }; @@ -1356,6 +1456,13 @@ bias-disable; }; + i2c11_default: i2c11-default-state { + pins = "gpio18", "gpio19"; + function = "qup11"; + drive-strength = <16>; + bias-disable; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -1459,6 +1566,22 @@ }; }; + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio41"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { perst-n-pins { pins = "gpio178"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 945de77911de..1e3babf2e40d 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -14,7 +14,7 @@ thermal-zones { pm8280_1_thermal: pm8280-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; trips { @@ -34,7 +34,7 @@ pm8280_2_thermal: pm8280-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 59f0a850671a..80a57aa22839 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3222,6 +3222,14 @@ usb_0_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_0_dwc3_ss>; + }; + }; + port@2 { reg = <2>; @@ -3275,6 +3283,14 @@ usb_1_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + port@2 { reg = <2>; @@ -3560,8 +3576,23 @@ phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_0_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_0_dwc3_ss: endpoint { + remote-endpoint = <&usb_0_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3622,8 +3653,23 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; }; }; }; @@ -5833,7 +5879,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -5848,7 +5893,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -5863,7 +5907,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -5878,7 +5921,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -5893,7 +5935,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5908,7 +5949,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5923,7 +5963,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -5938,7 +5977,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -5953,7 +5991,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -5967,13 +6004,25 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu-crit { + gpu_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5983,7 +6032,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 15>; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 702ab49bbc59..60412281ab27 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -96,6 +96,18 @@ vin-supply = <&vph_pwr>; }; + + /* + * this is also used for APC1 CPU power, touching it resets the board + */ + vreg_l10a_1p8: vreg-l10a-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-always-on; + regulator-boot-on; + }; }; &adsp_pil { @@ -220,6 +232,7 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; @@ -227,6 +240,7 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; @@ -464,5 +478,6 @@ &usb3_qmpphy { vdda-phy-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts new file mode 100644 index 000000000000..175befc02b22 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org> + */ +/dts-v1/; + +#include "sdm450.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/ { + model = "Lenovo Smart Tab M10"; + compatible = "lenovo,tbx605f", "qcom,sdm450"; + chassis-type = "tablet"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1200 * 1920 * 3)>; + + width = <1200>; + height = <1920>; + stride = <(1200 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + reserved-memory { + other_ext_region@0 { + no-map; + reg = <0x00 0x84500000 0x00 0x2300000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5506"; + reg = <0x38>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pm8953_l10>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1200>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <0x08>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; + +&wcnss { + vddpx-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; + + vddxo-supply = <&pm8953_l7>; + vddrfa-supply = <&pm8953_l19>; + vddpa-supply = <&pm8953_l9>; + vdddig-supply = <&pm8953_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts index e27f3c5d5bba..a288d52fb6d7 100644 --- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts @@ -248,5 +248,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index f5921b80ef94..c7e3764a8cf3 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1302,6 +1302,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&qusb2phy0>, <&usb3_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; @@ -2422,7 +2423,6 @@ thermal-zones { aoss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -2437,7 +2437,6 @@ cpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -2452,7 +2451,6 @@ cpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2467,7 +2465,6 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -2488,7 +2485,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -2509,7 +2505,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2530,7 +2525,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -2557,7 +2551,6 @@ pwr-cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -2578,7 +2571,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -2591,20 +2583,32 @@ trips { gpu_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 0xf08>, - <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 0 0xf08>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index e2708c74e95a..2c1172aa97e4 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -143,6 +143,10 @@ status = "okay"; }; +&pmi632_vib { + status = "okay"; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts index c82d6e628d2c..2f55db0c8ce3 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts @@ -287,5 +287,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 80e81c4233b3..187c6698835d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -509,6 +509,18 @@ no-map; }; + smem@86000000 { + compatible = "qcom,smem"; + reg = <0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + camera_mem: camera-mem@8ab00000 { reg = <0 0x8ab00000 0 0x500000>; no-map; @@ -1139,6 +1151,12 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + tlmm: pinctrl@3400000 { compatible = "qcom,sdm670-tlmm"; reg = <0 0x03400000 0 0xc00000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 76bfa786612c..2391f842c903 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -51,9 +51,6 @@ thermal-zones { xo_thermal: xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 1>; trips { @@ -66,9 +63,6 @@ }; msm_thermal: msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 2>; trips { @@ -81,9 +75,6 @@ }; pa_thermal: pa-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 3>; trips { @@ -96,9 +87,6 @@ }; quiet_thermal: quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 4>; trips { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 10de2bd46ffc..54077549b9da 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -2666,6 +2667,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -4028,6 +4031,35 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; usb_2_qmpphy: phy@88eb000 { @@ -4106,8 +4138,29 @@ iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -4161,6 +4214,7 @@ iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -4598,7 +4652,9 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; }; }; @@ -5105,6 +5161,78 @@ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@150c5000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150c5000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@150c9000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150c9000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@150cd000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150cd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@150d1000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d1000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@150d5000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_tbu: tbu@150d9000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d9000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@150dd000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150dd000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@150e1000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150e1000 0x0 0x1000>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + lpasscc: clock-controller@17014000 { compatible = "qcom,sdm845-lpasscc"; reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; @@ -5358,7 +5486,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -5385,7 +5512,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -5412,7 +5538,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -5439,7 +5564,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -5466,7 +5590,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -5493,7 +5616,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -5520,7 +5642,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -5547,7 +5668,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -5574,7 +5694,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -5589,7 +5708,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5609,7 +5727,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5629,7 +5746,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -5642,16 +5758,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -5664,16 +5791,27 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -5688,7 +5826,6 @@ q6-modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -5703,7 +5840,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -5718,7 +5854,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -5733,7 +5868,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -5748,7 +5882,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -5763,7 +5896,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -5778,7 +5910,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 47dc42f6e936..f18050848cd8 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -370,6 +370,66 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + + embedded-controller@70 { + compatible = "lenovo,yoga-c630-ec"; + reg = <0x70>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ec_int_state>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "host"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi0_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + ucsi0_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + ucsi0_sbu: endpoint { + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "host"; + + /* + * connected to the onboard USB hub, orientation is + * handled by the controller + */ + }; + }; }; &i2c3 { @@ -494,6 +554,7 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/LENOVO/81JL/ipa_fws.elf"; status = "okay"; }; @@ -694,6 +755,13 @@ bias-disable; }; + + ec_int_state: ec-int-state { + pins = "gpio20"; + function = "gpio"; + + bias-disable; + }; }; &uart6 { @@ -741,6 +809,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&ucsi0_hs_in>; +}; + &usb_1_hsphy { status = "okay"; @@ -761,6 +833,10 @@ vdda-pll-supply = <&vdda_usb1_ss_core>; }; +&usb_1_qmpphy_out { + remote-endpoint = <&ucsi0_ss_in>; +}; + &usb_2 { status = "okay"; }; @@ -834,6 +910,7 @@ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Lenovo_C630"; }; &crypto { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index f76e72fb2072..fde16308c7e2 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -41,6 +41,29 @@ vin-supply = <&vph_ext>; }; + + reg_2v952_vcc: regulator-2v952-vcc { + compatible = "regulator-gpio"; + regulator-name = "2v952_vcc"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3600000>; + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; + states = <1650000 0>, <3600000 1>; + startup-delay-us = <5000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_ext>; + }; + + reg_2v95_vdd: regulator-2v95-vdd { + compatible = "regulator-fixed"; + regulator-name = "2v95_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + vin-supply = <®_2v952_vcc>; + }; }; &apps_rsc { @@ -259,8 +282,30 @@ status = "okay"; }; +&sdhc { + cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_2v95_vdd>; + vqmmc-supply = <®_2v952_vcc>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc1_default &sd_cd>; + pinctrl-1 = <&sdc1_sleep &sd_cd>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <110 6>; + + sd_cd: sd-cd-state { + pins = "gpio103"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart1 { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index da1704061d58..9b93f6501d55 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -8,9 +8,12 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sdx75.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -405,7 +408,42 @@ }; }; - smem: qcom,smem { + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smem: smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; @@ -441,6 +479,37 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@408000 { + compatible = "qcom,sdx75-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + gpi_dma: dma-controller@900000 { + compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00900000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0xf6 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x2000>; @@ -457,6 +526,52 @@ ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>, + <&gpi_dma 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>, + <&gpi_dma 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + uart1: serial@984000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00984000 0x0 0x4000>; @@ -475,6 +590,229 @@ "sleep"; status = "disabled"; }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>, + <&gpi_dma 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>, + <&gpi_dma 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>, + <&gpi_dma 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>, + <&gpi_dma 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>, + <&gpi_dma 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>, + <&gpi_dma 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>, + <&gpi_dma 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0099c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>, + <&gpi_dma 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0099c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>, + <&gpi_dma 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; }; usb_hsphy: phy@ff4000 { @@ -538,6 +876,59 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sdx75-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + + sdhc: mmc@8804000 { + compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + iommus = <&apps_smmu 0x00a0 0x0>; + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + usb: usb@a6f8800 { compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; reg = <0x0 0x0a6f8800 0x0 0x400>; @@ -627,6 +1018,17 @@ interrupt-controller; }; + aoss_qmp: power-controller@c310000 { + compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c310000 0 0x1000>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + spmi_bus: spmi@c400000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c400000 0x0 0x3000>, @@ -661,6 +1063,145 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "qup_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "qup_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio116", "gpio117"; + function = "qup_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio11"; + function = "qup_se0"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup_se0"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio17"; + function = "qup_se2"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio16"; + function = "qup_se2"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio55"; + function = "qup_se3"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup_se3"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio115"; + function = "qup_se6"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio112", "gpio113", "gpio114"; + function = "qup_se6"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio119"; + function = "qup_se7"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio116", "gpio117", "gpio118"; + function = "qup_se7"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_uart4_cts_rts: qup-uart4-cts-rts-state { + /* CTS, RTS */ + pins = "gpio52", "gpio53"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart4_default: qup-uart4-default-state { + /* TX, RX */ + pins = "gpio54", "gpio55"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-up; + }; + qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { tx-pins { pins = "gpio12"; @@ -683,6 +1224,46 @@ drive-strength = <2>; bias-pull-down; }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; apps_smmu: iommu@15000000 { diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index 2c7a12983dae..9153a5a55ed9 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -240,6 +240,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index 603c962661cc..9c9919e78fbd 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -29,6 +29,14 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; }; cpus { @@ -39,10 +47,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_0: l2-cache { @@ -63,10 +73,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_100: l2-cache { @@ -81,10 +93,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_200: l2-cache { @@ -99,10 +113,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_300: l2-cache { @@ -117,10 +133,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_400>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_400: l2-cache { @@ -135,10 +153,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_500>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_500: l2-cache { @@ -153,10 +173,12 @@ device_type = "cpu"; compatible = "arm,cortex-a78"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_600: l2-cache { @@ -171,10 +193,12 @@ device_type = "cpu"; compatible = "arm,cortex-a78"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_700>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_700: l2-cache { @@ -268,9 +292,14 @@ reg = <0x0 0xa0000000 0x0 0x0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -526,6 +555,19 @@ }; }; + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm4450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 98eb072fa912..4a30024aa48f 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -234,6 +234,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 9ed062150aaf..e374733f3b85 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1088,6 +1088,8 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; + resets = <&gcc GCC_SDCC1_BCR>; + power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0x00c0 0x0>; @@ -1231,6 +1233,8 @@ "ref_aux", "qref"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1656,6 +1660,7 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + snps,parkmode-disable-ss-quirk; usb-role-switch; @@ -3012,8 +3017,6 @@ thermal-zones { mapss-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -3032,8 +3035,6 @@ }; cdsp-hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -3052,8 +3053,6 @@ }; wlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -3072,8 +3071,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -3092,8 +3089,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -3112,8 +3107,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -3132,8 +3125,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -3158,8 +3149,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -3184,8 +3173,6 @@ }; cpu6-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -3210,8 +3197,6 @@ }; cpu7-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -3236,8 +3221,6 @@ }; cpu45-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -3262,8 +3245,6 @@ }; cpu67-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -3288,8 +3269,6 @@ }; cpu0123-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -3314,8 +3293,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -3334,8 +3311,6 @@ }; display-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -3354,8 +3329,8 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; + thermal-sensors = <&tsens0 15>; cooling-maps { @@ -3367,13 +3342,13 @@ trips { gpu_alert0: trip-point0 { - temperature = <115000>; - hysteresis = <5000>; + temperature = <85000>; + hysteresis = <1000>; type = "passive"; }; trip-point1 { - temperature = <125000>; + temperature = <110000>; hysteresis = <1000>; type = "critical"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 54da053a8042..9d78bb3f7190 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -359,6 +359,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 08046f866f60..dcd05f303b78 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -90,8 +90,6 @@ thermal-zones { rf-pa0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 0>; trips { @@ -104,8 +102,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <5000>; thermal-sensors = <&pm6125_adc_tm 1>; trips { @@ -118,8 +114,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 2>; trips { @@ -132,8 +126,6 @@ }; rf-pa1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 3>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index a49d3ebb1931..994fb0412fcb 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -84,8 +84,6 @@ thermal-zones { rf-pa0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 0>; trips { @@ -98,8 +96,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <5000>; thermal-sensors = <&pm6125_adc_tm 1>; trips { @@ -112,8 +108,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 2>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 98ab08356088..777c380c2fa0 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -1588,10 +1588,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 0xf08 - GIC_PPI 2 0xf08 - GIC_PPI 3 0xf08 - GIC_PPI 0 0xf08>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index dddd6e44d280..bf23033a294e 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -293,7 +293,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <22 0x2008>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm6350_l11>; avdd-supply = <&touch_en_vreg>; @@ -375,6 +375,7 @@ }; &usb_1_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "super-speed"; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 84ff20a96c83..7986ddb30f6e 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1197,6 +1197,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1321,6 +1323,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -1580,6 +1583,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -1713,10 +1717,39 @@ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; + orientation-switch; + #clock-cells = <1>; #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; dc_noc: interconnect@9160000 { @@ -1890,8 +1923,30 @@ snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -2831,9 +2886,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -2846,9 +2898,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2861,9 +2910,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 2>; trips { @@ -2876,9 +2922,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -2891,9 +2934,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -2919,9 +2959,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -2947,9 +2984,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -2975,9 +3009,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -3003,9 +3034,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -3031,9 +3059,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -3059,9 +3084,6 @@ }; cpu6-left-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -3087,9 +3109,6 @@ }; cpu6-right-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -3115,9 +3134,6 @@ }; cpu7-left-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -3143,9 +3159,6 @@ }; cpu7-right-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 12>; trips { @@ -3171,9 +3184,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -3186,9 +3196,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -3201,9 +3208,6 @@ }; cwlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 1>; trips { @@ -3216,9 +3220,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -3231,21 +3232,20 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <95000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; gpuss0-crit { - temperature = <115000>; - hysteresis = <0>; + temperature = <110000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -3259,21 +3259,20 @@ }; gpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <95000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; gpuss1-crit { - temperature = <115000>; - hysteresis = <0>; + temperature = <110000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -3287,9 +3286,6 @@ }; modem-core0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -3302,9 +3298,6 @@ }; modem-core1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -3317,9 +3310,6 @@ }; modem-scl-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -3332,9 +3322,6 @@ }; modem-vec-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -3347,9 +3334,6 @@ }; npu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -3362,9 +3346,6 @@ }; q6-hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -3377,9 +3358,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index cca2c2eb88ad..e04a3b8f81c5 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -142,7 +142,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <22 0x2008>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm6125_l13>; avdd-supply = <&touch_avdd>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index f40509d91bbd..ddea681b536d 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1837,9 +1837,6 @@ thermal-zones { mapss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -1864,9 +1861,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -1891,9 +1885,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -1918,9 +1909,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -1945,9 +1933,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -1972,9 +1957,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -1999,9 +1981,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -2026,9 +2005,6 @@ }; cluster0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -2053,9 +2029,6 @@ }; cluster1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2080,9 +2053,6 @@ }; cpu6-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -2107,9 +2077,6 @@ }; cpu7-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -2134,9 +2101,6 @@ }; cpu-unk0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -2161,9 +2125,6 @@ }; cpu-unk1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 12>; trips { @@ -2188,9 +2149,6 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 13>; trips { @@ -2215,9 +2173,6 @@ }; gpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 14>; trips { @@ -2242,9 +2197,6 @@ }; mapss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2269,9 +2221,6 @@ }; cwlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 1>; trips { @@ -2296,9 +2245,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 2>; trips { @@ -2323,9 +2269,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -2350,9 +2293,6 @@ }; q6hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -2377,9 +2317,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -2404,9 +2341,6 @@ }; mdm-core0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -2431,9 +2365,6 @@ }; mdm-core1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -2458,9 +2389,6 @@ }; mdm-vec-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -2485,9 +2413,6 @@ }; msm-scl-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -2512,9 +2437,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index bc67e8c1fe4d..2ee2561b57b1 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -19,6 +19,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" @@ -92,10 +93,22 @@ }; }; + msm_therm_sensor: thermal-sensor-msm { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + + rear_cam_sensor: thermal-sensor-rear-cam { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + thermal-zones { chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -108,8 +121,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -120,6 +131,119 @@ }; }; }; + + pa0-thermal { + thermal-sensors = <&pm6150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa1-thermal { + thermal-sensors = <&pm6150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pm6150l_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&rear_cam_sensor>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rfc-flash-thermal { + thermal-sensors = <&pm6150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&msm_therm_sensor>; + + trips { + trip0 { + temperature = <45000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <55000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; }; }; @@ -134,124 +258,145 @@ qcom,pmic-id = "a"; vreg_s1a: smps1 { + regulator-name = "vreg_s1a"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; vreg_s2a: smps2 { + regulator-name = "vreg_s2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <2048000>; }; vreg_l2a: ldo2 { + regulator-name = "vreg_l2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; regulator-min-microvolt = <352000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12a: ldo12 { + regulator-name = "vreg_l12a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; regulator-min-microvolt = <570000>; regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14a: ldo14 { + regulator-name = "vreg_l14a"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15a: ldo15 { + regulator-name = "vreg_l15a"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16a: ldo16 { + regulator-name = "vreg_l16a"; regulator-min-microvolt = <830000>; regulator-max-microvolt = <921000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a: ldo18 { + regulator-name = "vreg_l18a"; regulator-min-microvolt = <788000>; regulator-max-microvolt = <1049000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19a: ldo19 { + regulator-name = "vreg_l19a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l20a: ldo20 { + regulator-name = "vreg_l20a"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l21a: ldo21 { + regulator-name = "vreg_l21a"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <825000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l22a: ldo22 { + regulator-name = "vreg_l22a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -263,41 +408,48 @@ qcom,pmic-id = "e"; vreg_s8e: smps8 { + regulator-name = "vreg_s8e"; regulator-min-microvolt = <313000>; regulator-max-microvolt = <1395000>; }; vreg_l1e: ldo1 { + regulator-name = "vreg_l1e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2e: ldo2 { + regulator-name = "vreg_l2e"; regulator-min-microvolt = <1170000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3e: ldo3 { + regulator-name = "vreg_l3e"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1299000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4e: ldo4 { + regulator-name = "vreg_l4e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5e: ldo5 { + regulator-name = "vreg_l5e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -307,18 +459,21 @@ }; vreg_l7e: ldo7 { + regulator-name = "vreg_l7e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9e: ldo9 { + regulator-name = "vreg_l9e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -328,18 +483,21 @@ }; vreg_l10e: ldo10 { + regulator-name = "vreg_l10e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11e: ldo11 { + regulator-name = "vreg_l11e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <5492000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -407,7 +565,79 @@ }; &i2c10 { - /* PM8008 PMIC @ 8 and 9 */ + clock-frequency = <400000>; + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8e>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s2a>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2904000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3140000>; + }; + }; + }; + /* PX8618 @ 26 */ /* SMB1395 PMIC @ 34 */ /* awinic,aw8695 @ 5a */ @@ -462,6 +692,91 @@ status = "okay"; }; +&pm6150l_adc { + pinctrl-0 = <&pm6150l_adc_default>; + pinctrl-names = "default"; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "pa_therm1"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "msm_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "pa_therm0"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@53 { + reg = <ADC5_GPIO2_100K_PU>; + label = "rear_cam_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@54 { + reg = <ADC5_GPIO3_100K_PU>; + label = "rear_cam_flash_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@55 { + reg = <ADC5_GPIO4_100K_PU>; + label = "quiet_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; +}; + +&pm6150l_adc_tm { + status = "okay"; + + pa-therm1@0 { + reg = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + pa-therm0@1 { + reg = <1>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + rear-cam-flash-therm@2 { + reg = <2>; + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + quiet-therm@3 { + reg = <3>; + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pm6150l_flash { status = "okay"; @@ -484,6 +799,14 @@ }; }; +&pm6150l_gpios { + pm6150l_adc_default: adc-default-state { + pins = "gpio6", "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + &pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; @@ -543,6 +866,64 @@ }; }; +&pm7250b_typec { + vdd-pdphy-supply = <&vreg_l3a>; + + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + /* + * Disable USB Power Delivery for now, seems to need extra work + * to support role switching while also letting the battery + * charge still - without charger driver + */ + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm7250b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; + }; + }; + + port@1 { + reg = <1>; + pm7250b_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm7250b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1500000>; + status = "okay"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -673,6 +1054,22 @@ */ bias-pull-up; }; + + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio58"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; &uart1 { @@ -726,7 +1123,11 @@ &usb_1_dwc3 { maximum-speed = "super-speed"; - dr_mode = "peripheral"; + dr_mode = "otg"; +}; + +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm7250b_hs_in>; }; &usb_1_hsphy { @@ -744,6 +1145,10 @@ status = "okay"; }; +&usb_1_qmpphy_out { + remote-endpoint = <&pm7250b_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 6cb6f503fdac..bac08f00b303 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -470,7 +470,6 @@ &mdss_dp_out { data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss_dsi0 { @@ -556,7 +555,7 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { + pm8150b_hs_in: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -676,18 +675,10 @@ orientation-switch; }; -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp_out>; -}; - &usb_1_qmpphy_out { remote-endpoint = <&pm8150b_typec_mux_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &usb_2_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l3c_1p2>; @@ -708,11 +699,7 @@ }; &usb_1_dwc3_hs { - remote-endpoint = <&pm8150b_role_switch_in>; -}; - -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + remote-endpoint = <&pm8150b_hs_in>; }; &usb_2_dwc3 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ff22e4346660..3e236adb9397 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/qcom,dispcc-sm8150.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,videocc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8150.h> #include <dt-bindings/thermal/thermal.h> @@ -3507,6 +3508,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3514,6 +3516,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; }; }; }; @@ -3672,6 +3675,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -3735,6 +3739,19 @@ }; }; + videocc: clock-controller@ab00000 { + compatible = "qcom,sm8150-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; @@ -3894,6 +3911,7 @@ reg = <1>; mdss_dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; }; }; @@ -4577,7 +4595,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -4621,7 +4638,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -4665,7 +4681,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -4709,7 +4724,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -4753,7 +4767,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -4797,7 +4810,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -4841,7 +4853,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -4885,7 +4896,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -4929,7 +4939,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -4973,7 +4982,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -5017,7 +5025,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -5061,7 +5068,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -5105,7 +5111,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -5120,7 +5125,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5140,7 +5144,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5160,7 +5163,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -5173,16 +5175,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -5197,7 +5210,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -5212,7 +5224,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -5227,7 +5238,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -5242,7 +5252,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -5257,7 +5266,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -5272,7 +5280,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -5287,7 +5294,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -5302,7 +5308,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -5317,7 +5322,6 @@ modem-vec-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 9>; @@ -5332,7 +5336,6 @@ modem-scl-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 10>; @@ -5347,7 +5350,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -5360,10 +5362,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7ef99038cb37..21b2ca1def83 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -53,8 +53,6 @@ thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 0>; trips { @@ -67,8 +65,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150b_adc_tm 0>; trips { @@ -81,8 +77,6 @@ }; mmw-pa1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 2>; trips { @@ -95,8 +89,6 @@ }; mmw-pa2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 2>; trips { @@ -109,8 +101,6 @@ }; skin-msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 1>; trips { @@ -123,8 +113,6 @@ }; skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 1>; trips { @@ -137,8 +125,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 0>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index e07d0311ecb5..f6870d3f2886 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -520,7 +520,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <39 0x2008>; + interrupts = <39 IRQ_TYPE_LEVEL_LOW>; /* It's "vddio" downstream but it works anyway! */ vdd-supply = <&vreg_l1c_1p8>; avdd-supply = <&vreg_l10c_3p3>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 41f117474872..3596dd328c31 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -659,8 +659,8 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { - remote-endpoint = <&usb_1_role_switch_out>; + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; }; }; }; @@ -725,8 +725,8 @@ status = "okay"; }; -&usb_1_role_switch_out { - remote-endpoint = <&pm8150b_role_switch_in>; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8ccade628f1f..9d6c97d1fd9d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2204,7 +2204,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2580,6 +2580,8 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; + power-domains = <&gcc UFS_PHY_GDSC>; + #phy-cells = <0>; status = "disabled"; @@ -3936,6 +3938,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3947,6 +3951,10 @@ port@1 { reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; }; port@2 { @@ -4225,8 +4233,24 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_role_switch_out: endpoint {}; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; }; }; }; @@ -6275,7 +6299,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -6319,7 +6342,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -6363,7 +6385,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -6407,7 +6428,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -6451,7 +6471,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -6495,7 +6514,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -6539,7 +6557,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -6583,7 +6600,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -6627,7 +6643,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -6671,7 +6686,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -6715,7 +6729,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -6759,7 +6772,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -6803,7 +6815,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -6818,7 +6829,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -6838,7 +6848,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -6858,7 +6867,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -6871,16 +6879,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -6895,7 +6914,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -6910,7 +6928,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -6925,7 +6942,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -6940,7 +6956,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -6955,7 +6970,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -6970,7 +6984,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -6985,7 +6998,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -7000,7 +7012,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -7013,10 +7024,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 4c25ab2f5670..895adce59e75 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -486,17 +486,10 @@ &mdss_dp { status = "okay"; +}; - ports { - port@1 { - reg = <1>; - - mdss_dp0_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; - }; - }; - }; +&mdss_dp_out { + data-lanes = <0 1>; }; &mpss { @@ -864,10 +857,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { status = "okay"; @@ -881,22 +870,12 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p88>; - - orientation-switch; -}; - -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; }; &usb_1_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &usb_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index f7c4700f00c3..38ee0850c335 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -301,8 +301,18 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x1 { + compatible = "arm,cortex-x1-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -1779,6 +1789,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2256,6 +2268,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2273,6 +2287,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -2280,6 +2295,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; }; }; }; @@ -2405,6 +2421,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -2626,6 +2643,14 @@ remote-endpoint = <&dpu_intf0_out>; }; }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; }; dp_opp_table: opp-table { @@ -3665,7 +3690,6 @@ thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3709,7 +3733,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3753,7 +3776,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3797,7 +3819,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -3841,7 +3862,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3885,7 +3905,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3929,7 +3948,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -3973,7 +3991,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -4017,7 +4034,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -4061,7 +4077,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -4105,7 +4120,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -4149,7 +4163,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -4193,7 +4206,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -4208,7 +4220,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -4228,7 +4239,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -4248,7 +4258,6 @@ aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -4263,7 +4272,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -4276,16 +4284,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -4298,16 +4317,27 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; nspss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -4322,7 +4352,6 @@ nspss2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -4337,7 +4366,6 @@ nspss3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -4352,7 +4380,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -4367,7 +4394,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -4382,7 +4408,6 @@ modem1-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -4397,7 +4422,6 @@ modem2-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 9>; @@ -4412,7 +4436,6 @@ modem3-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 10>; @@ -4427,7 +4450,6 @@ modem4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -4442,7 +4464,6 @@ camera-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 12>; @@ -4457,7 +4478,6 @@ cam-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 13>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 3be46b56c723..a754b8fe9167 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -138,7 +138,7 @@ thermal-zones { camera-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -152,7 +152,7 @@ rear-tof-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 5>; trips { @@ -166,7 +166,7 @@ skin-msm-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -180,7 +180,7 @@ therm1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -194,7 +194,7 @@ therm2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 6>; trips { @@ -208,7 +208,7 @@ usb-conn-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 7>; trips { @@ -222,7 +222,7 @@ wide-rfc-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -235,8 +235,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -674,17 +672,10 @@ &mdss_dp0 { status = "okay"; +}; - ports { - port@1 { - reg = <1>; - - mdss_dp0_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; - }; - }; - }; +&mdss_dp0_out { + data-lanes = <0 1>; }; &pcie0 { @@ -1114,10 +1105,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { status = "okay"; @@ -1131,22 +1118,12 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; - - orientation-switch; -}; - -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; }; &usb_1_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &vamacro { pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 8b29fcf483a3..17dbb67868ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -488,7 +488,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <21 0x2008>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm8350c_l2>; avdd-supply = <&pm8350c_l3>; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 616461fcbab9..9bafb3b350ff 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -754,8 +754,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <0>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -1803,6 +1803,12 @@ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", "cpu-pcie"; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, <&pcie0_phy>, @@ -1845,8 +1851,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + }; + pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; @@ -1932,6 +1965,12 @@ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", "cpu-pcie"; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, <&pcie1_phy>, @@ -1972,8 +2011,56 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; @@ -2001,7 +2088,7 @@ "pipe"; clock-output-names = "pcie_1_pipe_clk"; - #clock-cells = <0>; + #clock-cells = <1>; #phy-cells = <0>; @@ -2304,6 +2391,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2321,6 +2410,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -2328,6 +2418,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3119,6 +3210,14 @@ remote-endpoint = <&dpu_intf0_out>; }; }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; }; dp_opp_table: opp-table { @@ -4362,9 +4461,10 @@ compatible = "qcom,sm8450-llcc"; reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, - <0 0x19a00000 0 0x80000>; + <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", - "llcc3_base", "llcc_broadcast_base"; + "llcc3_base", "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4429,6 +4529,8 @@ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, <&gcc GCC_UFS_0_CLKREF_EN>; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -4584,6 +4686,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -4610,8 +4713,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -4630,8 +4731,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -4650,8 +4749,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -4670,8 +4767,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -4690,8 +4785,6 @@ }; cpuss4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -4710,8 +4803,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -4736,8 +4827,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -4762,8 +4851,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -4788,8 +4875,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -4814,8 +4899,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -4840,8 +4923,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -4866,8 +4947,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -4892,8 +4971,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -4918,8 +4995,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -4945,7 +5020,7 @@ gpu-top-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens0 14>; cooling-maps { @@ -4956,35 +5031,29 @@ }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_top_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu_top_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpu-bottom-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens0 15>; cooling-maps { @@ -4995,35 +5064,27 @@ }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_bottom_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu_bottom_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -5042,8 +5103,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5068,8 +5127,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5094,8 +5151,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5120,8 +5175,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; trips { @@ -5147,7 +5200,7 @@ cdsp0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 5>; trips { @@ -5179,7 +5232,7 @@ cdsp1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 6>; trips { @@ -5211,7 +5264,7 @@ cdsp2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 7>; trips { @@ -5242,8 +5295,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; trips { @@ -5263,7 +5314,7 @@ mem-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 9>; trips { @@ -5288,8 +5339,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 10>; trips { @@ -5320,8 +5369,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 11>; trips { @@ -5352,8 +5399,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 12>; trips { @@ -5384,8 +5429,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 13>; trips { @@ -5416,8 +5459,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -5436,8 +5477,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index 12d60a0ee095..2e12219006c9 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -940,7 +940,6 @@ }; &mdss_dp0_out { - remote-endpoint = <&usb_dp_qmpphy_dp_in>; data-lanes = <0 1>; }; @@ -979,10 +978,6 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; -}; - &pm8550_gpios { sdc2_card_det_n: sdc2-card-det-state { pins = "gpio12"; @@ -1111,6 +1106,7 @@ #sound-dai-cells = <0>; sound-name-prefix = "SpkrLeft"; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ @@ -1128,6 +1124,7 @@ #sound-dai-cells = <0>; sound-name-prefix = "SpkrRight"; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1258,19 +1255,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -1284,23 +1272,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p88>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 3d4ad5aac70f..ab447fc252f7 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -736,11 +736,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; }; &pcie0 { @@ -847,6 +842,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845 */ @@ -860,6 +856,7 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -951,19 +948,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -977,23 +965,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p91>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 92f015017418..774bdfcffec3 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -214,6 +214,68 @@ regulator-always-on; regulator-boot-on; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>; + + wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s5g_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s2g_0p85>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p8-supply = <&vreg_s6g_1p86>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -720,17 +782,6 @@ status = "okay"; }; -&gcc { - clocks = <&bi_tcxo_div2>, <&sleep_clk>, - <&pcie0_phy>, - <&pcie1_phy>, - <0>, - <&ufs_mem_phy 0>, - <&ufs_mem_phy 1>, - <&ufs_mem_phy 2>, - <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; -}; - &gpi_dma1 { status = "okay"; }; @@ -807,11 +858,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - status = "disabled"; }; &pcie0 { @@ -824,6 +870,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; @@ -907,8 +970,15 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; +&pmk8550_gpios { + pmk8550_sleep_clk: sleep-clk-state { + pins = "gpio3"; + function = "func1"; + input-disable; + output-enable; + bias-disable; + power-source = <0>; + }; }; &qupv3_id_0 { @@ -955,6 +1025,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ @@ -968,6 +1039,7 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1084,6 +1156,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart7 { @@ -1135,19 +1214,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -1161,23 +1231,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p88>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts new file mode 100644 index 000000000000..3d351e90bb39 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> + * Copyright (c) 2024, David Wronek <david@mainlining.org> + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8550.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/delete-node/ &adspslpi_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mpss_dsm_mem; +/delete-node/ &mpss_mem; +/delete-node/ &rmtfs_mem; + +/ { + model = "Samsung Galaxy Z Fold5"; + compatible = "samsung,q5q", "qcom,sm8550"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@b8000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xb8000000 0x0 0x2b00000>; + width = <2176>; + height = <1812>; + stride = <(2176 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + adspslpi_mem: adspslpi@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x59b4000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0 0x9c900000 0 0x2000000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@d4d00000 { + reg = <0x0 0xd4d00000 0x0 0x3300000>; + no-map; + }; + + mpss_mem: mpss@8b400000 { + reg = <0x0 0x8b400000 0x0 0xfc00000>; + no-map; + }; + + rmtfs_mem: rmtfs-region@d4a80000 { + reg = <0x0 0xd4a80000 0x0 0x280000>; + no-map; + }; + + /* + * The bootloader will only keep display hardware enabled + * if this memory region is named exactly 'splash_region' + */ + splash_region@b8000000 { + reg = <0x0 0xb8000000 0x0 0x2b00000>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "disabled"; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mdt", + "qcom/sm8550/adsp_dtb.mdt"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mdt", + "qcom/sm8550/cdsp_dtb.mdt"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mdt", + "qcom/sm8550/modem_dtb.mdt"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <36 4>, <50 2>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts index 85e0d3d66e16..85d487ef80a0 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -737,19 +737,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&pm8550vs_2_l1>; vdda12-supply = <&pm8550vs_2_l3>; @@ -761,7 +752,6 @@ &usb_dp_qmpphy { vdda-phy-supply = <&pm8550vs_2_l3>; vdda-pll-supply = <&pm8550ve_l3>; - orientation-switch; status = "okay"; }; @@ -770,10 +760,6 @@ remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index bc5aeb05ffc3..4c9820adcf52 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -58,11 +58,6 @@ clock-mult = <1>; clock-div = <2>; }; - - pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; }; cpus { @@ -357,8 +352,23 @@ reg = <0 0xa0000000 0 0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a510 { + compatible = "arm,cortex-a510-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a710 { + compatible = "arm,cortex-a710-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a715 { + compatible = "arm,cortex-a715-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x3 { + compatible = "arm,cortex-x3-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -776,8 +786,8 @@ #power-domain-cells = <1>; clocks = <&bi_tcxo_div2>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <&pcie_1_phy_aux_clk>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -1774,7 +1784,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -1928,7 +1938,7 @@ power-domains = <&gcc PCIE_1_PHY_GDSC>; - #clock-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie1_pipe_clk"; #phy-cells = <0>; @@ -2910,6 +2920,7 @@ port@1 { reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; }; }; @@ -3169,6 +3180,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -3186,6 +3199,7 @@ reg = <1>; usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3193,6 +3207,7 @@ reg = <2>; usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3264,6 +3279,7 @@ snps,has-lpm-erratum; tx-fifo-resize; dma-coherent; + usb-role-switch; ports { #address-cells = <1>; @@ -3280,6 +3296,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; }; }; @@ -4295,12 +4312,14 @@ <0 0x25200000 0 0x200000>, <0 0x25400000 0 0x200000>, <0 0x25600000 0 0x200000>, - <0 0x25800000 0 0x200000>; + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4571,8 +4590,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -4591,8 +4608,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -4611,8 +4626,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -4631,8 +4644,6 @@ }; cpuss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -4651,8 +4662,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -4671,8 +4680,6 @@ }; cpu3-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -4697,8 +4704,6 @@ }; cpu3-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -4723,8 +4728,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -4749,8 +4752,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -4775,8 +4776,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -4801,8 +4800,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -4827,8 +4824,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -4853,8 +4848,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -4879,8 +4872,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -4905,8 +4896,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -4931,8 +4920,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 15>; trips { @@ -4957,8 +4944,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -4977,8 +4962,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5003,8 +4986,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5029,8 +5010,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5056,7 +5035,7 @@ cdsp0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; trips { @@ -5088,7 +5067,7 @@ cdsp1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; trips { @@ -5120,7 +5099,7 @@ cdsp2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; trips { @@ -5152,7 +5131,7 @@ cdsp3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; trips { @@ -5183,8 +5162,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; trips { @@ -5204,7 +5181,7 @@ mem-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 9>; trips { @@ -5229,8 +5206,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 10>; trips { @@ -5261,8 +5236,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 11>; trips { @@ -5293,8 +5266,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 12>; trips { @@ -5325,8 +5296,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 13>; trips { @@ -5357,8 +5326,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -5377,8 +5344,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { @@ -5397,8 +5362,6 @@ }; aoss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 0>; trips { @@ -5418,312 +5381,264 @@ gpuss-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 1>; cooling-maps { map0 { - trip = <&gpu0_junction_config>; + trip = <&gpu0_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu0_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu0_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 2>; cooling-maps { map0 { - trip = <&gpu1_junction_config>; + trip = <&gpu1_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu1_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu1_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 3>; cooling-maps { map0 { - trip = <&gpu2_junction_config>; + trip = <&gpu2_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu2_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu2_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; cooling-maps { map0 { - trip = <&gpu3_junction_config>; + trip = <&gpu3_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu3_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu3_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; cooling-maps { map0 { - trip = <&gpu4_junction_config>; + trip = <&gpu4_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu4_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu4_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; cooling-maps { map0 { - trip = <&gpu5_junction_config>; + trip = <&gpu5_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu5_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu5_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-6-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; cooling-maps { map0 { - trip = <&gpu6_junction_config>; + trip = <&gpu6_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu6_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu6_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-7-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; cooling-maps { map0 { - trip = <&gpu7_junction_config>; + trip = <&gpu7_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu7_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu7_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso new file mode 100644 index 000000000000..cb102535838d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +/* + * Display Card kit overlay + * This requires S5702 Switch 7 to be turned to OFF to route DSI0 to the display panel + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/plugin/; + +/* Disable HDMI bridge related nodes (mutually exclusive with the display card) */ + +&i2c6 { + status = "disabled"; +}; + +<9611_1v2 { + status = "disabled"; +}; + +<9611_3v3 { + status = "disabled"; +}; + +&vreg_bob_3v3 { + status = "disabled"; +}; + +<9611_codec { + status = "disabled"; +}; + +&mdss_dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + remote-endpoint = <&panel0_in>; + }; + }; + }; +}; + +&spi4 { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync: mdp-vsync-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts new file mode 100644 index 000000000000..591e6ab9bf5b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -0,0 +1,1355 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 HDK"; + compatible = "qcom,sm8650-hdk", "qcom,sm8650"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-2 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_ORANGE>; + gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + lt9611_1v2: regulator-lt9611-1v2 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vreg_bob_3v3>; + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_bob_3v3: regulator-vreg-bob-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_BOB_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8650/ipa_fws.mbn"; + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; + }; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; + + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */ +&pm8550_pwm { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + +&qupv3_id_0 { + iommus = <&apps_smmu 0xa3 0x3>; + + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>, <74 1>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio85"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio28"; + function = "gpio"; + output-high; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index d04ceaa73c2b..c63822f5b127 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -59,7 +59,7 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_dp_qmpphy_out>; }; }; }; @@ -641,10 +641,6 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; -}; - &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; @@ -755,6 +751,16 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ @@ -768,6 +774,16 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -853,10 +869,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -873,6 +885,10 @@ status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 4e94f7fe4d2d..b0d7927b708f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -203,6 +203,71 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -832,11 +897,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; }; &pcie0 { @@ -849,6 +909,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1i_0p88>; vdda-pll-supply = <&vreg_l3i_1p2>; @@ -1012,6 +1089,16 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ @@ -1025,6 +1112,16 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1143,6 +1240,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart14 { @@ -1211,10 +1315,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -1228,23 +1328,13 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 62a6e77730bc..9d9bbb9aca64 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4,10 +4,12 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8650-camcc.h> #include <dt-bindings/clock/qcom,sm8650-dispcc.h> #include <dt-bindings/clock/qcom,sm8650-gcc.h> #include <dt-bindings/clock/qcom,sm8650-gpucc.h> #include <dt-bindings/clock/qcom,sm8650-tcsr.h> +#include <dt-bindings/clock/qcom,sm8650-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> @@ -60,11 +62,6 @@ clock-mult = <1>; clock-div = <2>; }; - - pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; }; cpus { @@ -371,6 +368,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8650", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; }; @@ -394,8 +392,18 @@ reg = <0 0xa0000000 0 0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a520 { + compatible = "arm,cortex-a520-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a720 { + compatible = "arm,cortex-a720-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x4 { + compatible = "arm,cortex-x4-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -758,8 +766,8 @@ <&bi_tcxo_ao_div2>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <&pcie_1_phy_aux_clk>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -2208,7 +2216,7 @@ reg = <0 0x010c3000 0 0x1000>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { device_type = "pci"; compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; reg = <0 0x01c00000 0 0x3000>, @@ -2294,7 +2302,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2336,7 +2344,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { device_type = "pci"; compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; reg = <0 0x01c08000 0 0x3000>, @@ -2467,7 +2475,7 @@ power-domains = <&gcc PCIE_1_PHY_GDSC>; - #clock-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie1_pipe_clk"; #phy-cells = <0>; @@ -2626,6 +2634,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -3309,6 +3318,30 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8650-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8650-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8650-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3675,6 +3708,7 @@ reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; }; }; @@ -3750,6 +3784,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -3767,6 +3803,7 @@ reg = <1>; usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3774,6 +3811,7 @@ reg = <2>; usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3864,6 +3902,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; }; }; @@ -4982,12 +5021,14 @@ <0 0x25400000 0 0x200000>, <0 0x25200000 0 0x200000>, <0 0x25600000 0 0x200000>, - <0 0x25800000 0 0x200000>; + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -5328,8 +5369,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -5348,8 +5387,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -5368,8 +5405,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -5388,8 +5423,6 @@ }; cpuss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -5408,8 +5441,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -5428,8 +5459,6 @@ }; cpu2-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -5454,8 +5483,6 @@ }; cpu2-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -5480,8 +5507,6 @@ }; cpu3-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -5506,8 +5531,6 @@ }; cpu3-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -5532,8 +5555,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -5558,8 +5579,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -5584,8 +5603,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -5610,8 +5627,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -5636,8 +5651,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -5662,8 +5675,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -5688,8 +5699,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -5708,8 +5717,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5734,8 +5741,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5760,8 +5765,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5786,8 +5789,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; trips { @@ -5812,8 +5813,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; trips { @@ -5839,7 +5838,7 @@ nsphvx0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; trips { @@ -5859,7 +5858,7 @@ nsphvx1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; trips { @@ -5879,7 +5878,7 @@ nsphmx0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; trips { @@ -5899,7 +5898,7 @@ nsphmx1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 9>; trips { @@ -5919,7 +5918,7 @@ nsphmx2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 10>; trips { @@ -5939,7 +5938,7 @@ nsphmx3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 11>; trips { @@ -5959,7 +5958,7 @@ video-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 12>; trips { @@ -5979,7 +5978,7 @@ ddr-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 13>; trips { @@ -5998,8 +5997,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -6018,8 +6015,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { @@ -6038,8 +6033,6 @@ }; aoss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 0>; trips { @@ -6059,19 +6052,32 @@ gpuss0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + cooling-maps { + map0 { + trip = <&gpu0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu0_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss0-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6079,19 +6085,32 @@ gpuss1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss1-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6099,19 +6118,32 @@ gpuss2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + cooling-maps { + map0 { + trip = <&gpu2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss2-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6119,19 +6151,32 @@ gpuss3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + cooling-maps { + map0 { + trip = <&gpu3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu3_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss3-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6139,19 +6184,32 @@ gpuss4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + cooling-maps { + map0 { + trip = <&gpu4_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu4_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss4-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6159,19 +6217,32 @@ gpuss5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + cooling-maps { + map0 { + trip = <&gpu5_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu5_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss5-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6179,19 +6250,32 @@ gpuss6-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + cooling-maps { + map0 { + trip = <&gpu6_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss6-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6199,27 +6283,38 @@ gpuss7-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + cooling-maps { + map0 { + trip = <&gpu7_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu7_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss7-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 9>; trips { @@ -6238,8 +6333,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 10>; trips { @@ -6258,8 +6351,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 11>; trips { @@ -6278,8 +6369,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 12>; trips { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts new file mode 100644 index 000000000000..7fb980fcb307 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -0,0 +1,616 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "ASUS Vivobook S 15"; + compatible = "asus,vivobook-s15", "qcom,x1e80100"; + chassis-type = "laptop"; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side port, closer to the screen */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side port, farther from the screen */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + /* EC? @ 0x5b, 0x76 */ +}; + +&i2c7 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "disabled"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index be6b1e7d07ce..6152bcd0bc1f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -49,6 +49,104 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + /* Right-side port */ + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + reserved-memory { linux,cma { compatible = "shared-dma-pool"; @@ -173,6 +271,20 @@ regulator-always-on; regulator-boot-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; }; &apps_rsc { @@ -655,11 +767,19 @@ }; &pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie6a_default>; + status = "okay"; }; &pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>; status = "okay"; @@ -804,6 +924,36 @@ bias-disable; }; + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -840,8 +990,8 @@ }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -849,6 +999,9 @@ }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -858,12 +1011,19 @@ &usb_1_ss0_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -871,6 +1031,9 @@ }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -880,12 +1043,19 @@ &usb_1_ss1_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -893,6 +1063,9 @@ }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -902,5 +1075,12 @@ &usb_1_ss2_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts new file mode 100644 index 000000000000..fbff558f5b07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -0,0 +1,929 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Lenovo Yoga Slim 7x"; + compatible = "lenovo,yoga-slim7x", "qcom,x1e80100"; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + /* Right-side port */ + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-LENOVO-Yoga-Slim7x"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT"; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@14 { + compatible = "hid-over-i2c"; + reg = <0x14>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn", + "qcom/x1e80100/LENOVO/83ED/adsp_dtbs.elf"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn", + "qcom/x1e80100/LENOVO/83ED/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_2_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi index 04301f772fbd..e34e70922cd3 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -3,10 +3,477 @@ * Copyright (c) 2024, Linaro Limited */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> / { + thermal-zones { + pm8550-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-2-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-3-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_3_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-4-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_4_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-5-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_5_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-6-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_6_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-8-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_8_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-9-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_9_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8010-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8010_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + /* PMK8380 */ + pmk8550: pmic@0 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8550_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8550_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + /* Not yet sure what blocks access */ + status = "reserved"; + }; + + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + + pmk8550_gpios: gpio@8800 { + compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8550_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380C */ + pm8550: pmic@1 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550_gpios: gpio@8800 { + compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + /* PMC8380VE */ + pm8550ve_2: pmic@2 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_2_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_2_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380 is actually not a PM8550 series rebrand */ + pmc8380_3: pmic@3 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_3_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_3_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_4: pmic@4 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_4_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_4_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_4_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_5: pmic@5 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_5_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_5_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_5_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_6: pmic@6 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_6_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_6_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_6_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_8: pmic@8 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_8_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_8_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_8_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_9: pmic@9 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_9_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_9_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_9_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8010: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; }; &spmi_bus1 { @@ -48,4 +515,19 @@ #phy-cells = <0>; }; }; + + smb2360_3: pmic@c { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_3_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 8f67c393b871..72a4f4138616 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -19,10 +19,131 @@ serial0 = &uart21; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + reserved-memory { linux,cma { compatible = "shared-dma-pool"; @@ -32,6 +153,66 @@ }; }; + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-QCP"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -59,6 +240,20 @@ regulator-always-on; regulator-boot-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; }; &apps_rsc { @@ -411,6 +606,16 @@ }; }; +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -466,11 +671,19 @@ }; &pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie6a_default>; + status = "okay"; }; &pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>; status = "okay"; @@ -502,6 +715,10 @@ status = "okay"; }; +&smb2360_3 { + status = "okay"; +}; + &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l2b_3p0>; @@ -517,6 +734,57 @@ vdd3-supply = <&vreg_l8b_3p0>; }; +&swr0 { + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + status = "okay"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + #sound-dai-cells = <0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + #sound-dai-cells = <0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { gpio-reserved-ranges = <33 3>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -528,6 +796,44 @@ drive-strength = <16>; bias-disable; }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart21 { @@ -536,8 +842,8 @@ }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -545,6 +851,9 @@ }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -554,12 +863,19 @@ &usb_1_ss0_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -567,6 +883,9 @@ }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -576,12 +895,19 @@ &usb_1_ss1_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -589,6 +915,9 @@ }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -598,5 +927,12 @@ &usb_1_ss2_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 05e4d491ec18..7bca5fcd7d52 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/clock/qcom,x1e80100-gpucc.h> #include <dt-bindings/clock/qcom,x1e80100-tcsr.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> @@ -2505,6 +2506,66 @@ }; }; + tsens0: thermal-sensor@c271000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c271000 0 0x1000>, + <0 0x0c222000 0 0x1000>; + + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c272000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c272000 0 0x1000>, + <0 0x0c223000 0 0x1000>; + + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c273000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c273000 0 0x1000>, + <0 0x0c224000 0 0x1000>; + + interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c274000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c274000 0 0x1000>, + <0 0x0c225000 0 0x1000>; + + interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + usb_1_ss0_hsphy: phy@fd3000 { compatible = "qcom,x1e80100-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; @@ -2543,6 +2604,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss0_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; }; usb_1_ss1_hsphy: phy@fd9000 { @@ -2583,6 +2672,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp1_out>; + }; + }; + }; }; usb_1_ss2_hsphy: phy@fde000 { @@ -2623,6 +2740,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss2_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp2_out>; + }; + }; + }; }; cnoc_main: interconnect@1500000 { @@ -2987,6 +3132,200 @@ #reset-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43050c01", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + #cooling-cells = <2>; + + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + zap-shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/gen70500_zap.mbn"; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <16500000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <14398438>; + }; + + opp-925000000 { + opp-hz = /bits/ 64 <925000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <14398438>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <12449219>; + }; + + opp-744000000 { + opp-hz = /bits/ 64 <744000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <10687500>; + }; + + opp-687000000 { + opp-hz = /bits/ 64 <687000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <8171875>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <6074219>; + }; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3000000>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + opp-peak-kBps = <2136719>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-x185.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,x1e80100-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + gem_noc: interconnect@26400000 { compatible = "qcom,x1e80100-gem-noc"; reg = <0 0x26400000 0 0x311200>; @@ -3447,8 +3786,23 @@ dma-coherent; - port { - usb_1_ss2_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3516,8 +3870,15 @@ phy-names = "usb2-phy"; maximum-speed = "high-speed"; - port { - usb_2_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_2_dwc3_hs: endpoint { + }; }; }; }; @@ -3592,8 +3953,23 @@ dma-coherent; - port { - usb_1_ss0_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3675,8 +4051,23 @@ dma-coherent; - port { - usb_1_ss1_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3862,6 +4253,7 @@ reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>; }; }; }; @@ -3944,6 +4336,7 @@ reg = <1>; mdss_dp1_out: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>; }; }; }; @@ -4023,6 +4416,10 @@ port@1 { reg = <1>; + + mdss_dp2_out: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>; + }; }; }; @@ -5157,6 +5554,129 @@ }; }; + pmu@24091000 { + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <2188000>; + }; + + opp-2 { + opp-peak-kBps = <3072000>; + }; + + opp-3 { + opp-peak-kBps = <6220800>; + }; + + opp-4 { + opp-peak-kBps = <6835200>; + }; + + opp-5 { + opp-peak-kBps = <8371200>; + }; + + opp-6 { + opp-peak-kBps = <10944000>; + }; + + opp-7 { + opp-peak-kBps = <12748800>; + }; + + opp-8 { + opp-peak-kBps = <14745600>; + }; + + opp-9 { + opp-peak-kBps = <16896000>; + }; + }; + }; + + /* cluster0 */ + pmu@240b3400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b3400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4800000>; + }; + + opp-1 { + opp-peak-kBps = <7464000>; + }; + + opp-2 { + opp-peak-kBps = <9600000>; + }; + + opp-3 { + opp-peak-kBps = <12896000>; + }; + + opp-4 { + opp-peak-kBps = <14928000>; + }; + + opp-5 { + opp-peak-kBps = <17064000>; + }; + }; + }; + + /* cluster2 */ + pmu@240b5400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b5400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + /* cluster1 */ + pmu@240b6400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + system-cache-controller@25000000 { compatible = "qcom,x1e80100-llcc"; reg = <0 0x25000000 0 0x200000>, @@ -5226,6 +5746,55 @@ label = "lpass"; qcom,remote-pid = <2>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + gpr { compatible = "qcom,gpr"; qcom,glink-channels = "adsp_apps"; @@ -5315,6 +5884,101 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x20>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x20>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x0c07 0x20>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x0c08 0x20>; + dma-coherent; + }; + + /* note: compute-cb@9 is secure */ + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x0c0c 0x20>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x0c0d 0x20>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x0c0e 0x20>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x0c0f 0x20>; + dma-coherent; + }; + }; }; }; }; @@ -5327,4 +5991,1158 @@ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mem-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu2-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss2-top-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss2-btm-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 5>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 6>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 7>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 8>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 9>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 10>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-6-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 11>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-7-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 12>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens3 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens3 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi index 7c34d14dcd7e..8b7c0c34eadc 100644 --- a/arch/arm64/boot/dts/renesas/condor-common.dtsi +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -227,6 +227,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &i2c1 { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index a8a44fe5e83b..1dbf9d56c68d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2853,6 +2853,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 4fff511e994c..10f22c52e79e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2704,6 +2704,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 1ef43d78c3a5..3e2af50ce7c6 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1990,6 +1990,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index be55ae83944c..1eeb4c7b4c4b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -2985,6 +2985,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index bea4edd17d53..96f3b5fe7e92 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -3473,6 +3473,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 7846fea8e40d..1122c470b72f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -3068,6 +3068,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 58f9286a5ab5..bf1130af7de3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -2889,6 +2889,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 692940662d38..f02d1547b881 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2877,6 +2877,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clocks - can be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index d2d3cecc76d5..64fb95b1c89a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1223,5 +1223,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 68d1f1d53b3a..1d326552e2fa 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -14,11 +14,3 @@ model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; }; - -&i2c0 { - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index c0ba110c74d6..0c2b157036e7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1630,5 +1630,6 @@ IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 37063e3f4e1b..233af3081e84 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -2157,5 +2157,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 89990dd8ebf7..5f0828a4675b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1476,5 +1476,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index cfa70b441e32..d76347001cc1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -2919,6 +2919,9 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 477f3114d2fd..4ed8d4c37906 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -15,6 +15,12 @@ compatible = "renesas,spider-cpu", "renesas,r8a779f0"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &hscif0; serial1 = &scif0; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 72cf30341fc4..9629adb47d99 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -1324,7 +1324,10 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; ufs30_clk: ufs30-clk { diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts index bc65a7b4d999..fa910b85859e 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts @@ -14,6 +14,12 @@ compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &hscif0; serial1 = &hscif1; ethernet0 = &rswitch; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso index e6f53377ecd9..e6cf304c77ee 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso @@ -155,11 +155,7 @@ pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout */ - #clock-cells = <0>; clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */ // clock-frequency = <6144000>; /* 48 kHz groups [(C) clock] */ diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 9bc542bc6169..53d1d4d8197a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -815,8 +815,6 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -862,8 +860,6 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -909,8 +905,6 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1724,18 +1718,6 @@ }; rcar_sound: sound@ec5a0000 { - /* - * #sound-dai-cells is required - * - * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; - * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; - */ - /* - * #clock-cells is required - * - * clkout : #clock-cells = <0>; <&rcar_sound>; - * audio_clkout0/1/2/3 : #clock-cells = <1>; <&rcar_sound N>; - */ compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4"; reg = <0 0xec5a0000 0 0x020>, <0 0xec540000 0 0x1000>, @@ -1745,6 +1727,11 @@ clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>; clock-names = "ssiu.0", "ssi.0", "clkin"; + /* #clock-cells is fixed */ + #clock-cells = <0>; + /* #sound-dai-cells is fixed */ + #sound-dai-cells = <0>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; resets = <&cpg 2926>, <&cpg 2927>; reset-names = "ssiu.0", "ssi.0"; @@ -2359,6 +2346,9 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts index cfbe8c8680cd..2b9a19bb1c5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts @@ -17,6 +17,10 @@ compatible = "renesas,gray-hawk-single", "renesas,r8a779h0"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; serial0 = &hscif0; serial1 = &hscif2; ethernet0 = &avb0; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi index 6d791024cabe..a03ab2b6a859 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi @@ -14,9 +14,15 @@ #address-cells = <2>; #size-cells = <2>; + /* External Audio clock - to be overridden by boards that provide it */ + audio_clkin: audio_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; - opp-shared; opp-500000000 { opp-hz = /bits/ 64 <500000000>; @@ -939,6 +945,454 @@ status = "disabled"; }; + vin00: video@e6ef0000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 730>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 730>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin00isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin00>; + }; + }; + }; + }; + + vin01: video@e6ef1000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 731>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 731>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin01isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin01>; + }; + }; + }; + }; + + vin02: video@e6ef2000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 800>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 800>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin02isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin02>; + }; + }; + }; + }; + + vin03: video@e6ef3000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 801>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 801>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin03isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin03>; + }; + }; + }; + }; + + vin04: video@e6ef4000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 802>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin04isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin04>; + }; + }; + }; + }; + + vin05: video@e6ef5000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 803>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 803>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin05isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin05>; + }; + }; + }; + }; + + vin06: video@e6ef6000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 804>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin06isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin06>; + }; + }; + }; + }; + + vin07: video@e6ef7000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 805>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin07isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin07>; + }; + }; + }; + }; + + vin08: video@e6ef8000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 806>; + renesas,id = <8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin08isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin08>; + }; + }; + }; + }; + + vin09: video@e6ef9000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 807>; + renesas,id = <9>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin09isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin09>; + }; + }; + }; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 808>; + renesas,id = <10>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin10isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin10>; + }; + }; + }; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 809>; + renesas,id = <11>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin11isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin11>; + }; + }; + }; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 810>; + renesas,id = <12>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin12isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin12>; + }; + }; + }; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 811>; + renesas,id = <13>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin13isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin13>; + }; + }; + }; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 812>; + renesas,id = <14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin14isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin14>; + }; + }; + }; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a779h0"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 813>; + renesas,id = <15>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin15isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin15>; + }; + }; + }; + }; + dmac1: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779h0", "renesas,rcar-gen4-dmac"; @@ -1011,6 +1465,67 @@ <&ipmmu_ds0 22>, <&ipmmu_ds0 23>; }; + rcar_sound: sound@ec400000 { + compatible = "renesas,rcar_sound-r8a779h0", "renesas,rcar_sound-gen4"; + reg = <0 0xec400000 0 0x40000>, + <0 0xec540000 0 0x1000>, + <0 0xec541000 0 0x050>, + <0 0xec5a0000 0 0x020>; + reg-names = "sdmc", "ssiu", "ssi", "adg"; + clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>; + clock-names = "ssiu.0", "ssi.0", "clkin"; + /* #clock-cells is fixed */ + #clock-cells = <0>; + /* #sound-dai-cells is fixed */ + #sound-dai-cells = <0>; + + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 2926>, <&cpg 2927>; + reset-names = "ssiu.0", "ssi.0"; + status = "disabled"; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&dmac1 0x6e>, <&dmac1 0x6f>; + dma-names = "tx", "rx"; + }; + ssiu01: ssiu-1 { + dmas = <&dmac1 0x6c>, <&dmac1 0x6d>; + dma-names = "tx", "rx"; + }; + ssiu02: ssiu-2 { + dmas = <&dmac1 0x6a>, <&dmac1 0x6b>; + dma-names = "tx", "rx"; + }; + ssiu03: ssiu-3 { + dmas = <&dmac1 0x68>, <&dmac1 0x69>; + dma-names = "tx", "rx"; + }; + ssiu04: ssiu-4 { + dmas = <&dmac1 0x66>, <&dmac1 0x67>; + dma-names = "tx", "rx"; + }; + ssiu05: ssiu-5 { + dmas = <&dmac1 0x64>, <&dmac1 0x65>; + dma-names = "tx", "rx"; + }; + ssiu06: ssiu-6 { + dmas = <&dmac1 0x62>, <&dmac1 0x63>; + dma-names = "tx", "rx"; + }; + ssiu07: ssiu-7 { + dmas = <&dmac1 0x60>, <&dmac1 0x61>; + dma-names = "tx", "rx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a779h0", "renesas,rcar-gen4-sdhi"; @@ -1152,6 +1667,224 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + csi40: csi2@fe500000 { + compatible = "renesas,r8a779h0-csi2"; + reg = <0 0xfe500000 0 0x40000>; + interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 331>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi40isp0: endpoint { + remote-endpoint = <&isp0csi40>; + }; + }; + }; + }; + + csi41: csi2@fe540000 { + compatible = "renesas,r8a779h0-csi2"; + reg = <0 0xfe540000 0 0x40000>; + interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 400>; + power-domains = <&sysc R8A779H0_PD_C4>; + resets = <&cpg 400>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi41isp1: endpoint { + remote-endpoint = <&isp1csi41>; + }; + }; + }; + }; + + isp0: isp@fed00000 { + compatible = "renesas,r8a779h0-isp"; + reg = <0 0xfed00000 0 0x10000>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A779H0_PD_A3ISP0>; + resets = <&cpg 612>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp0csi40: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi40isp0>; + }; + }; + + port@1 { + reg = <1>; + isp0vin00: endpoint { + remote-endpoint = <&vin00isp0>; + }; + }; + + port@2 { + reg = <2>; + isp0vin01: endpoint { + remote-endpoint = <&vin01isp0>; + }; + }; + + port@3 { + reg = <3>; + isp0vin02: endpoint { + remote-endpoint = <&vin02isp0>; + }; + }; + + port@4 { + reg = <4>; + isp0vin03: endpoint { + remote-endpoint = <&vin03isp0>; + }; + }; + + port@5 { + reg = <5>; + isp0vin04: endpoint { + remote-endpoint = <&vin04isp0>; + }; + }; + + port@6 { + reg = <6>; + isp0vin05: endpoint { + remote-endpoint = <&vin05isp0>; + }; + }; + + port@7 { + reg = <7>; + isp0vin06: endpoint { + remote-endpoint = <&vin06isp0>; + }; + }; + + port@8 { + reg = <8>; + isp0vin07: endpoint { + remote-endpoint = <&vin07isp0>; + }; + }; + }; + }; + + isp1: isp@fed20000 { + compatible = "renesas,r8a779h0-isp"; + reg = <0 0xfed20000 0 0x10000>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779H0_PD_A3ISP0>; + resets = <&cpg 613>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -1195,5 +1928,7 @@ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 6212ee550f33..2eccab9c8962 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -646,7 +646,7 @@ sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g043", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>; @@ -662,7 +662,7 @@ sdhi1: mmc@11c10000 { compatible = "renesas,sdhi-r9a07g043", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index 165bfcfef3bc..18ef297db933 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -50,7 +50,10 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 88634ae43287..d3838e5820fc 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -1050,7 +1050,7 @@ sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -1066,7 +1066,7 @@ sdhi1: mmc@11c10000 { compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -1334,6 +1334,9 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index e89bfe4085f5..1de2e5f0917d 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -1058,7 +1058,7 @@ sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g054", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -1074,7 +1074,7 @@ sdhi1: mmc@11c10000 { compatible = "renesas,sdhi-r9a07g054", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -1342,6 +1342,9 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index f5f3f4f4c8d6..0d5c47a65e46 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -182,7 +182,7 @@ }; sdhi0: mmc@11c00000 { - compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; @@ -197,7 +197,7 @@ }; sdhi1: mmc@11c10000 { - compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -212,7 +212,7 @@ }; sdhi2: mmc@11c20000 { - compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi"; reg = <0x0 0x11c20000 0 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -294,6 +294,9 @@ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", + "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 50ed66d42a24..9a4cbef704c1 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -71,7 +71,7 @@ sdhi0: mmc@85000000 { compatible = "renesas,sdhi-r9a09g011", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x85000000 0 0x2000>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; @@ -87,7 +87,7 @@ sdhi1: mmc@85010000 { compatible = "renesas,sdhi-r9a09g011", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x85010000 0 0x2000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; @@ -103,7 +103,7 @@ emmc: mmc@85020000 { compatible = "renesas,sdhi-r9a09g011", - "renesas,rcar-gen3-sdhi"; + "renesas,rzg2l-sdhi"; reg = <0x0 0x85020000 0 0x2000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; @@ -372,5 +372,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi index 8ac17370ff36..80496fb3d476 100644 --- a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi +++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi @@ -13,6 +13,12 @@ / { aliases { ethernet0 = &avb0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &hscif0; }; @@ -142,18 +148,23 @@ &avb0 { pinctrl-0 = <&avb0_pins>; pinctrl-names = "default"; - phy-handle = <&phy0>; + phy-handle = <&avb0_phy>; tx-internal-delay-ps = <2000>; status = "okay"; - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio7>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + avb0_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi index a218fda337cf..595ec4ff4cdd 100644 --- a/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi +++ b/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi @@ -6,6 +6,57 @@ * Copyright (C) 2022 Glider bv */ +/ { + aliases { + ethernet1 = &avb1; + ethernet2 = &avb2; + }; +}; + +&avb1 { + pinctrl-0 = <&avb1_pins>; + pinctrl-names = "default"; + phy-handle = <&avb1_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&avb2 { + pinctrl-0 = <&avb2_pins>; + pinctrl-names = "default"; + phy-handle = <&avb2_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb2_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + &i2c0 { eeprom@53 { compatible = "rohm,br24g01", "atmel,24c01"; @@ -14,3 +65,55 @@ pagesize = <8>; }; }; + +&pfc { + avb1_pins: avb1 { + mux { + groups = "avb1_link", "avb1_mdio", "avb1_rgmii", + "avb1_txcrefclk"; + function = "avb1"; + }; + + mdio { + groups = "avb1_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb1_rgmii"; + drive-strength = <24>; + bias-disable; + }; + + link { + groups = "avb1_link"; + bias-disable; + }; + }; + + avb2_pins: avb2 { + mux { + groups = "avb2_link", "avb2_mdio", "avb2_rgmii", + "avb2_txcrefclk"; + function = "avb2"; + }; + + mdio { + groups = "avb2_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb2_rgmii"; + drive-strength = <24>; + bias-disable; + }; + + link { + groups = "avb2_link"; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index f42fa62b4064..fda1b980eb4b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-s0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb @@ -27,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lba3368.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb @@ -79,6 +81,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinetab2-v0.1.dtb @@ -90,6 +94,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3e.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3w.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb @@ -110,6 +116,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb @@ -118,12 +125,16 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index 079101cddd65..62d18ca769a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -17,6 +17,7 @@ ethernet0 = &gmac; mmc0 = &emmc; mmc1 = &sdmmc; + mmc2 = &sdio; }; chosen { @@ -144,11 +145,25 @@ &gmac { clock_in_out = "output"; + phy-handle = <&rtl8201f>; phy-supply = <&vcc_io>; - snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8201f: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mac_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpio0 { @@ -217,10 +232,40 @@ status = "okay"; }; +&io_domains { + vccio0-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_io>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_io>; + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&rtc_32k>; + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + mac_rst: mac-rst { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { green_led: green-led { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -264,15 +309,31 @@ cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; - max-frequency = <1000000>; + max-frequency = <100000000>; mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; non-removable; - sd-uhs-sdr104; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_1v8>; status = "okay"; + + rtl8723ds: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; }; &sdmmc { + cap-mmc-highspeed; cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc_io>; status = "okay"; }; @@ -291,16 +352,22 @@ }; &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; status = "okay"; }; &uart4 { + uart-has-rtscts; status = "okay"; bluetooth { - compatible = "realtek,rtl8723bs-bt"; - device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts new file mode 100644 index 000000000000..bd6419a5c20a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "rk3308.dtsi" + +/ { + model = "Radxa ROCK S0"; + compatible = "radxa,rock-s0", "rockchip,rk3308"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led>; + + led-green { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vdd_log: regulator-1v04-vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1040000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: regulator-1v5-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v8: regulator-1v8-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: regulator-3v3-vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: regulator-vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_core"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-settling-time-up-us = <250>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + cap-mmc-highspeed; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-handle = <&rtl8201f>; + phy-supply = <&vcc_io>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8201f: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mac_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&io_domains { + vccio0-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_io>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + mac_rst: mac-rst { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led: pwr-led { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin_pull_down>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wake_host>; + }; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart4 { + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + clocks = <&cru SCLK_RTC32K>; + clock-names = "lpo"; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; + vbat-supply = <&vcc_io>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index c00da150a22f..31c25de2d689 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -173,6 +173,11 @@ compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; reg = <0x0 0xff000000 0x0 0x08000>; + io_domains: io-domains { + compatible = "rockchip,rk3308-io-voltage-domain"; + status = "disabled"; + }; + reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x500>; @@ -556,6 +561,30 @@ status = "disabled"; }; + otp: efuse@ff210000 { + compatible = "rockchip,rk3308-otp"; + reg = <0x0 0xff210000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + logic_leakage: logic-leakage@18 { + reg = <0x18 0x1>; + }; + }; + dmac0: dma-controller@ff2c0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff2c0000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 229fe9da9c2d..90fef766f3ae 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -154,6 +154,8 @@ }; &hdmi { + avdd-0v9-supply = <&vdd_10>; + avdd-1v8-supply = <&vcc_18>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 07dcc949b899..b01efd6d042c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -850,8 +850,8 @@ <0>, <24000000>, <24000000>, <24000000>, <15000000>, <15000000>, - <100000000>, <100000000>, - <100000000>, <100000000>, + <300000000>, <100000000>, + <400000000>, <100000000>, <50000000>, <100000000>, <100000000>, <100000000>, <50000000>, <50000000>, diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts new file mode 100644 index 000000000000..e0cc4da7f392 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts @@ -0,0 +1,659 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/clock/rockchip,rk808.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/rt5640.h> +#include "rk3368.dtsi" + +/ { + model = "Neardi LBA3368"; + compatible = "neardi,lba3368", "rockchip,rk3368"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + mmc2 = &sdio0; + rtc0 = &hym8563; + rtc1 = &rk808; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + adc-key { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s_8ch_p0>; + hp-det-gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + label = "alc5640"; + routing = "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speakers"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + ext_gmac: gmac-clk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + hub_avdd: hub-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "hub_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + power-led { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "ext_clock"; + reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + }; + + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + enable-active-high; + regulator-always-on; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + }; + + vcc_otg: vcc-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + enable-active-high; + regulator-always-on; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + vdd10_usb: vdd10-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd10_usb"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + vin-supply = <&vdd_10>; + regulator-always-on; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + cap-mmc-highspeed; + non-removable; + no-sd; + no-sdio; + mmc-hs200-1_8v; + status = "okay"; +}; + +&gmac { + clock_in_out = "input"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_lan>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + reset-assert-us = <10000>; + reset-deassert-us = <1000000>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&phy_rst>; + }; + }; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_18>; + gpio1830-supply = <&vcc_io>; + gpio30-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vdd1v8_wl>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupts-extended = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k_wifi_bt"; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &pmic_sleep>; + system-power-controller; + wakeup-source; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log: DCDC_REG2 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-suspend-microvolt = <1000000>; + regulator-on-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-suspend-microvolt = <3300000>; + regulator-on-in-suspend; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca3v0_codec: LDO_REG2 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-suspend-microvolt = <1000000>; + regulator-on-in-suspend; + }; + }; + + vdd1v8_wl: LDO_REG4 { + regulator-name = "vdd1v8_wl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG7 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-suspend-microvolt = <1800000>; + regulator-on-in-suspend; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_tp: SWITCH_REG1 { + regulator-name = "vcc_tp"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_sd: SWITCH_REG2 { + regulator-name = "vcc_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_IN1P>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_IN1N>; + realtek,in1-differential; + #sound-dai-cells = <0>; + + port { + rt5640_p0_0: endpoint { + remote-endpoint = <&i2s_8ch_p0_0>; + }; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; +}; + +&i2s_8ch { + status = "okay"; + + i2s_8ch_p0: port { + i2s_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&rt5640_p0_0>; + }; + }; +}; + +&pinctrl { + bluetooth { + bt_host_wake: bt-host-wake { + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on: bt-reg-on { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake: bt-wake { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + phy { + phy_rst: phy-rst { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pmic_sleep: pmic-sleep { + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_det: hp-det { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu-supply = <&vcc_io>; + vop-supply = <&vcc_io>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + mmc-pwrseq = <&sdio_pwrseq>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vdd1v8_wl>; + assigned-clocks = <&cru SCLK_SDIO0>; + assigned-clock-parents = <&cru PLL_CPLL>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + cap-sd-highspeed; + cap-sdio-irq; + no-sd; + no-mmc; + non-removable; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupts-extended = <&gpio3 RK_PA6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&sdmmc { + bus-width = <4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4 &sdmmc_cd>; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; + max-speed = <15000000>; + vbat-supply = <&vcc_io>; + vddio-supply = <&vdd1v8_wl>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_wake &bt_reg_on>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + vdd-supply = <&hub_avdd>; + }; +}; + +&usb_otg { + vbus-supply = <&vcc_otg>; + vusb_a-supply = <&vcc_io>; + vusb_d-supply = <&vdd10_usb>; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index e5709c7ee06a..ef754ea30a94 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -12,6 +12,7 @@ /dts-v1/; #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -69,6 +70,34 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&red_led_pin &green_led_pin &blue_led_pin>; + + led_red: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + + led_green: led-1 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + led_blue: led-2 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + leds = <&led_red>, <&led_green>, <&led_blue>; + }; + vcc_sys: vcc-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -152,6 +181,12 @@ gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + vcc-supply = <&vcc3v3_sys>; + }; }; &cpu_alert0 { @@ -407,6 +442,21 @@ }; }; +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + /* Accelerometer/gyroscope */ + mpu6500@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; + vddio-supply = <&vcc_1v8>; + }; +}; + &cluster0_opp { opp04 { status = "disabled"; @@ -481,6 +531,20 @@ }; }; + leds { + red_led_pin: red-led-pin { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + green_led_pin: green-led-pin { + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + blue_led_pin: blue-led-pin { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -565,6 +629,16 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi deleted file mode 100644 index bb5ebf6608b9..000000000000 --- a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. - -#include "rk3399.dtsi" - -/ { - compatible = "rockchip,rk3399pro"; -}; - -/* Default to enabled since AP talk to NPU part over pcie */ -&pcie_phy { - status = "okay"; -}; - -/* Default to enabled since AP talk to NPU part over pcie */ -&pcie0 { - ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts new file mode 100644 index 000000000000..074e93bd4b85 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-orangepi-3b.dtsi" + +/ { + model = "Xunlong Orange Pi 3B v1.1"; + compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566"; +}; + +&pmu_io_domains { + vccio5-supply = <&vcc_3v3>; +}; + +&gmac1 { + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts new file mode 100644 index 000000000000..d894bff41e61 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-orangepi-3b.dtsi" + +/ { + model = "Xunlong Orange Pi 3B v2.1"; + compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566"; + + vccio_phy1: regulator-1v8-vccio-phy { + compatible = "regulator-fixed"; + regulator-name = "vccio_phy1"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; +}; + +&pmu_io_domains { + vccio5-supply = <&vccio_phy1>; +}; + +&gmac1 { + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; + }; +}; + +&sdmmc1 { + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wake_host_h>; + }; +}; + +&uart1 { + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + interrupt-parent = <&gpio2>; + interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>; + vbat-supply = <&vcc_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi new file mode 100644 index 000000000000..d539570f531e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi @@ -0,0 +1,678 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Xunlong Orange Pi 3B"; + compatible = "xunlong,orangepi-3b", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc3v3_pcie30: regulator-3v3-vcc-pcie30 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_pwren>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren_h>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <200>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_rgmii_bus + &gmac1m0_clkinout>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_pins>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + bluetooth { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led: work-led { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_pins: pcie20-pins { + rockchip,pins = + <1 RK_PB0 4 &pcfg_pull_none>, + <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PB1 4 &pcfg_pull_none>; + }; + + pcie20_pwren: pcie20-pwren { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren_h: usb-otg-pwren-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index d899087bf0b5..ae2536c65a83 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -674,6 +674,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>; pinctrl-names = "default"; uart-has-rtscts; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index 0b191d8462ad..37a1303d9a34 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -738,6 +738,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index b908ce006c26..13e599a85eb8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -652,6 +652,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi new file mode 100644 index 000000000000..9cc7aa3298d0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led2>; + + led-green { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_1v8: regulator-1v8-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + vcca_1v8: regulator-1v8-vcca { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + vcca1v8_image: regulator-1v8-vcca-image { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_p>; + }; + + vcc_3v3: regulator-3v3-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_D0 - D7 */ + "pin-10 [GPIO0_D0]", "pin-08 [GPIO0_D1]", "", + "", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "pin-03 [GPIO1_A0]", "pin-05 [GPIO1_A1]", "", + "", "pin-37 [GPIO1_A4]", "", + "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO2_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO2_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "", "pin-11 [GPIO3_A1]", "pin-13 [GPIO3_A2]", + "pin-12 [GPIO3_A3]", "pin-35 [GPIO3_A4]", "pin-40 [GPIO3_A5]", + "pin-38 [GPIO3_A6]", "pin-36 [GPIO3_A7]", + /* GPIO3_B0 - B7 */ + "pin-15 [GPIO3_B0]", "pin-16 [GPIO3_B1]", "pin-18 [GPIO3_B2]", + "pin-29 [GPIO3_B3]", "pin-31 [GPIO3_B4]", "", + "", "", + /* GPIO3_C0 - C7 */ + "", "pin-22 [GPIO3_C1]", "pin-32 [GPIO3_C2]", + "pin-33 [GPIO3_C3]", "pin-07 [GPIO3_C4]", "", + "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + /* GPIO4_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO4_B0 - B7 */ + "", "", "pin-27 [GPIO4_B2]", + "pin-28 [GPIO4_B3]", "", "", "", "", + /* GPIO4_C0 - C7 */ + "", "", "pin-23 [GPIO4_C2]", + "pin-19 [GPIO4_C3]", "", "pin-21 [GPIO4_C5]", + "pin-24 [GPIO4_C6]", "", + /* GPIO4_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpu { + mali-supply = <&vdd_gpu_npu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-output-names = "rk817-clkout1", "rk817-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v_midu>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu_npu: DCDC_REG2 { + regulator-name = "vdd_gpu_npu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8_p: LDO_REG7 { + regulator-name = "vcc_1v8_p"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-name = "vcc2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v_midu: BOOST { + regulator-name = "vcc5v_midu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vbus: OTG_SWITCH { + regulator-name = "vbus"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "rockchip,rk8600"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&pinctrl { + leds { + user_led2: user-led2 { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts new file mode 100644 index 000000000000..4a830eb09f0b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-radxa-zero-3.dtsi" + +/ { + model = "Radxa ZERO 3E"; + compatible = "radxa,zero-3e", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + }; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rstn>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + gmac1 { + gmac1_rstn: gmac1-rstn { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts new file mode 100644 index 000000000000..f92475c59deb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-radxa-zero-3.dtsi" + +/ { + model = "Radxa ZERO 3W"; + compatible = "radxa,zero-3w", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + bluetooth { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 63eea27293fe..67e7801bd489 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -269,7 +269,7 @@ vcc9-supply = <&vcc3v3_sys>; codec { - mic-in-differential; + rockchip,mic-in-differential; }; regulators { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts index b242409d378c..f2cc086e5001 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts @@ -633,7 +633,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; - spi-max-frequency = <120000000>; + spi-max-frequency = <104000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index dd4e9c1893c6..e42c474ef4ad 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -614,6 +614,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; uart-has-rtscts; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 19f8fc369b13..8c3ab07d3807 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -475,7 +475,7 @@ }; codec { - mic-in-differential; + rockchip,mic-in-differential; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts index 58ab7e9971db..b5e67990dd0f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts @@ -11,6 +11,10 @@ }; }; +&pmu_io_domains { + vccio3-supply = <&vccio_sd>; +}; + &sdmmc0 { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi index 89e84e3a9262..25c49bdbadbc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi @@ -39,9 +39,9 @@ }; }; - dc_12v: dc-12v-regulator { + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; - regulator-name = "dc_12v"; + regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; @@ -65,7 +65,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&vcc12v_dcin>; }; vcc5v0_sys: vcc5v0-sys-regulator { @@ -75,16 +75,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb_host: vcc5v0-usb-host-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb_host"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; }; vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { @@ -94,8 +85,9 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb_otg_en>; regulator-name = "vcc5v0_usb_otg"; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -123,6 +115,10 @@ cpu-supply = <&vdd_cpu>; }; +&display_subsystem { + status = "disabled"; +}; + &gpu { mali-supply = <&vdd_gpu>; status = "okay"; @@ -405,8 +401,8 @@ &pmu_io_domains { pmuio1-supply = <&vcc3v3_pmu>; pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; @@ -429,28 +425,12 @@ status = "okay"; }; -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - &usb_host0_xhci { dr_mode = "host"; extcon = <&usb2phy0>; status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - &usb_host1_xhci { status = "okay"; }; @@ -460,7 +440,7 @@ }; &usb2phy0_host { - phy-supply = <&vcc5v0_usb_host>; + phy-supply = <&vcc5v0_sys>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts index e1fe5e442689..ce2a5e1ccefc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts @@ -39,7 +39,7 @@ &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 15ms, 50ms for rtl8211f */ snps,reset-delays-us = <0 15000 50000>; @@ -61,7 +61,7 @@ &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 15ms, 50ms for rtl8211f */ snps,reset-delays-us = <0 15000 50000>; @@ -71,18 +71,18 @@ }; &mdio0 { - rgmii_phy0: ethernet-phy@0 { + rgmii_phy0: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; + reg = <0x1>; pinctrl-0 = <ð_phy0_reset_pin>; pinctrl-names = "default"; }; }; &mdio1 { - rgmii_phy1: ethernet-phy@0 { + rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; + reg = <0x1>; pinctrl-0 = <ð_phy1_reset_pin>; pinctrl-names = "default"; }; @@ -102,6 +102,10 @@ }; }; +&pmu_io_domains { + vccio3-supply = <&vcc_3v3>; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index ebdedea15ad1..59f1403b4fa5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -531,10 +531,6 @@ }; }; }; - - codec { - mic-in-differential; - }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts new file mode 100644 index 000000000000..3d0c1ccfaa79 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "Radxa ROCK 3B"; + compatible = "radxa,rock-3b", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_ir>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_pi6c_03"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <10000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys2: regulator-3v3-vcc-sys2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren_h>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + &gmac0_clkinout>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&rtcic_int_l>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20m1_pins>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys2>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2m1_pins>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + bluetooth { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir-receiver { + pwm3_ir: pwm3-ir { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led: led { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie20 { + pcie20m1_pins: pcie20m1-pins { + rockchip,pins = + <2 RK_PD0 4 &pcfg_pull_none>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, + <2 RK_PD1 4 &pcfg_pull_none>; + }; + }; + + pcie30x2 { + pcie30x2m1_pins: pcie30x2m1-pins { + rockchip,pins = + <2 RK_PD4 4 &pcfg_pull_none>, + <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, + <2 RK_PD5 4 &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtc { + rtcic_int_l: rtcic-int-l { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren_h: usb-otg-pwren-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys2>; + vqmmc-supply = <&vcc_1v8>; + status = "disabled"; +}; + +&sfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; + uart-has-rtscts; + status = "disabled"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index d8543b5557ee..4690be841a1c 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -195,32 +195,32 @@ opp-200000000 { opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000>; + opp-microvolt = <850000 850000 1000000>; }; opp-300000000 { opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <825000>; + opp-microvolt = <850000 850000 1000000>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000>; + opp-microvolt = <850000 850000 1000000>; }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000>; + opp-microvolt = <900000 900000 1000000>; }; opp-700000000 { opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <900000>; + opp-microvolt = <950000 950000 1000000>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1000000>; }; }; @@ -790,6 +790,7 @@ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3568_PD_VO>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index 98c622b27647..c667704ba985 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -673,6 +673,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi index 30db12c4fc82..30db12c4fc82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi new file mode 100644 index 000000000000..b6e4df180f0b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -0,0 +1,2799 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/clock/rockchip,rk3588-cru.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/rk3588-power.h> +#include <dt-bindings/reset/rockchip,rk3588-cru.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/ata/ahci.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3588"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu_b2>; + }; + core1 { + cpu = <&cpu_b3>; + }; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l0>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l1>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l2>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_l3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <530>; + clocks = <&scmi_clk SCMI_CLK_CPUL>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l3>; + dynamic-power-coefficient = <228>; + #cooling-cells = <2>; + }; + + cpu_b0: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b0>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b1: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB01>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b1>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b2: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b2>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + cpu_b3: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&scmi_clk SCMI_CLK_CPUB23>; + cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b3>; + dynamic-power-coefficient = <416>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <100>; + exit-latency-us = <120>; + min-residency-us = <1000>; + }; + }; + + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b0: l2-cache-b0 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b1: l2-cache-b1 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b2: l2-cache-b2 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_b3: l2-cache-b3 { + compatible = "cache"; + cache-size = <524288>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <3145728>; + cache-line-size = <64>; + cache-sets = <4096>; + cache-level = <3>; + cache-unified; + }; + }; + + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + spll: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <702000000>; + clock-output-names = "spll"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; + }; + + xin24m: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin32k: clock-2 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; + + pmu_sram: sram@10f000 { + compatible = "mmio-sram"; + reg = <0x0 0x0010f000 0x0 0x100>; + ranges = <0 0x0 0x0010f000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0x0 0xfb000000 0x0 0x200000>; + #cooling-cells = <2>; + assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <200000000>; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + clock-names = "core", "coregroup", "stacks"; + dynamic-power-coefficient = <2982>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&power RK3588_PD_GPU>; + status = "disabled"; + }; + + usb_host0_xhci: usb@fc000000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc000000 0x0 0x400000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG0>; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + + usb_host0_ehci: usb@fc800000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc800000 0x0 0x40000>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host0_ohci: usb@fc840000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc840000 0x0 0x40000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ehci: usb@fc880000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc880000 0x0 0x40000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ohci: usb@fc8c0000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc8c0000 0x0 0x40000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host2_xhci: usb@fcd00000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfcd00000 0x0 0x400000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>, + <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>, + <&cru CLK_PIPEPHY2_PIPE_U3_G>; + clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe"; + dr_mode = "host"; + phys = <&combphy2_psu PHY_TYPE_USB3>; + phy-names = "usb3-phy"; + phy_type = "utmi_wide"; + resets = <&cru SRST_A_USB3OTG2>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + mmu600_pcie: iommu@fc900000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfc900000 0x0 0x200000>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + + mmu600_php: iommu@fcb00000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0xfcb00000 0x0 0x200000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; + #iommu-cells = <1>; + status = "disabled"; + }; + + pmu1grf: syscon@fd58a000 { + compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xfd58a000 0x0 0x10000>; + }; + + sys_grf: syscon@fd58c000 { + compatible = "rockchip,rk3588-sys-grf", "syscon"; + reg = <0x0 0xfd58c000 0x0 0x1000>; + }; + + vop_grf: syscon@fd5a4000 { + compatible = "rockchip,rk3588-vop-grf", "syscon"; + reg = <0x0 0xfd5a4000 0x0 0x2000>; + }; + + vo0_grf: syscon@fd5a6000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a6000 0x0 0x2000>; + clocks = <&cru PCLK_VO0GRF>; + }; + + vo1_grf: syscon@fd5a8000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a8000 0x0 0x100>; + clocks = <&cru PCLK_VO1GRF>; + }; + + usb_grf: syscon@fd5ac000 { + compatible = "rockchip,rk3588-usb-grf", "syscon"; + reg = <0x0 0xfd5ac000 0x0 0x4000>; + }; + + php_grf: syscon@fd5b0000 { + compatible = "rockchip,rk3588-php-grf", "syscon"; + reg = <0x0 0xfd5b0000 0x0 0x1000>; + }; + + pipe_phy0_grf: syscon@fd5bc000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5bc000 0x0 0x100>; + }; + + pipe_phy2_grf: syscon@fd5c4000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c4000 0x0 0x100>; + }; + + usbdpphy0_grf: syscon@fd5c8000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5c8000 0x0 0x4000>; + }; + + usb2phy0_grf: syscon@fd5d0000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d0000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2phy@0 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x0 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb2phy2_grf: syscon@fd5d8000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d8000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy2: usb2phy@8000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x8000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy2"; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy2_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb2phy3_grf: syscon@fd5dc000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5dc000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy3: usb2phy@c000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0xc000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy3"; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy3_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + hdptxphy0_grf: syscon@fd5e0000 { + compatible = "rockchip,rk3588-hdptxphy-grf", "syscon"; + reg = <0x0 0xfd5e0000 0x0 0x100>; + }; + + ioc: syscon@fd5f0000 { + compatible = "rockchip,rk3588-ioc", "syscon"; + reg = <0x0 0xfd5f0000 0x0 0x10000>; + }; + + system_sram1: sram@fd600000 { + compatible = "mmio-sram"; + reg = <0x0 0xfd600000 0x0 0x100000>; + ranges = <0x0 0x0 0xfd600000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + cru: clock-controller@fd7c0000 { + compatible = "rockchip,rk3588-cru"; + reg = <0x0 0xfd7c0000 0x0 0x5c000>; + assigned-clocks = + <&cru PLL_PPLL>, <&cru PLL_AUPLL>, + <&cru PLL_NPLL>, <&cru PLL_GPLL>, + <&cru ACLK_CENTER_ROOT>, + <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>, + <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>, + <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>, + <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>, + <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, + <&cru CLK_GPU>; + assigned-clock-rates = + <1100000000>, <786432000>, + <850000000>, <1188000000>, + <702000000>, + <400000000>, <500000000>, + <800000000>, <100000000>, + <400000000>, <100000000>, + <200000000>, <500000000>, + <375000000>, <150000000>, + <200000000>; + rockchip,grf = <&php_grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@fd880000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfd880000 0x0 0x1000>; + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c0m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@fd890000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfd890000 0x0 0x100>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart0m1_xfer>; + pinctrl-names = "default"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pwm0: pwm@fd8b0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0000 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm0m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@fd8b0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0010 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm1m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@fd8b0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0020 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm2m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@fd8b0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfd8b0030 0x0 0x10>; + clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm3m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu: power-management@fd8d8000 { + compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xfd8d8000 0x0 0x400>; + + power: power-controller { + compatible = "rockchip,rk3588-power-controller"; + #address-cells = <1>; + #power-domain-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* These power domains are grouped by VD_NPU */ + power-domain@RK3588_PD_NPU { + reg = <RK3588_PD_NPU>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3588_PD_NPUTOP { + reg = <RK3588_PD_NPUTOP>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>, + <&cru HCLK_NPU_CM0_ROOT>; + pm_qos = <&qos_npu0_mwr>, + <&qos_npu0_mro>, + <&qos_mcu_npu>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3588_PD_NPU1 { + reg = <RK3588_PD_NPU1>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>; + pm_qos = <&qos_npu1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_NPU2 { + reg = <RK3588_PD_NPU2>; + clocks = <&cru HCLK_NPU_ROOT>, + <&cru PCLK_NPU_ROOT>, + <&cru CLK_NPU_DSU0>; + pm_qos = <&qos_npu2>; + #power-domain-cells = <0>; + }; + }; + }; + /* These power domains are grouped by VD_GPU */ + power-domain@RK3588_PD_GPU { + reg = <RK3588_PD_GPU>; + clocks = <&cru CLK_GPU>, + <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + pm_qos = <&qos_gpu_m0>, + <&qos_gpu_m1>, + <&qos_gpu_m2>, + <&qos_gpu_m3>; + #power-domain-cells = <0>; + }; + /* These power domains are grouped by VD_VCODEC */ + power-domain@RK3588_PD_VCODEC { + reg = <RK3588_PD_VCODEC>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_RKVDEC0 { + reg = <RK3588_PD_RKVDEC0>; + clocks = <&cru HCLK_RKVDEC0>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC0>, + <&cru ACLK_RKVDEC_CCU>; + pm_qos = <&qos_rkvdec0>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC1 { + reg = <RK3588_PD_RKVDEC1>; + clocks = <&cru HCLK_RKVDEC1>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC1>; + pm_qos = <&qos_rkvdec1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_VENC0 { + reg = <RK3588_PD_VENC0>; + clocks = <&cru HCLK_RKVENC0>, + <&cru ACLK_RKVENC0>; + pm_qos = <&qos_rkvenc0_m0ro>, + <&qos_rkvenc0_m1ro>, + <&qos_rkvenc0_m2wo>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_VENC1 { + reg = <RK3588_PD_VENC1>; + clocks = <&cru HCLK_RKVENC1>, + <&cru HCLK_RKVENC0>, + <&cru ACLK_RKVENC0>, + <&cru ACLK_RKVENC1>; + pm_qos = <&qos_rkvenc1_m0ro>, + <&qos_rkvenc1_m1ro>, + <&qos_rkvenc1_m2wo>; + #power-domain-cells = <0>; + }; + }; + }; + /* These power domains are grouped by VD_LOGIC */ + power-domain@RK3588_PD_VDPU { + reg = <RK3588_PD_VDPU>; + clocks = <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_LOW_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_JPEG_DECODER_ROOT>, + <&cru ACLK_IEP2P0>, + <&cru HCLK_IEP2P0>, + <&cru ACLK_JPEG_ENCODER0>, + <&cru HCLK_JPEG_ENCODER0>, + <&cru ACLK_JPEG_ENCODER1>, + <&cru HCLK_JPEG_ENCODER1>, + <&cru ACLK_JPEG_ENCODER2>, + <&cru HCLK_JPEG_ENCODER2>, + <&cru ACLK_JPEG_ENCODER3>, + <&cru HCLK_JPEG_ENCODER3>, + <&cru ACLK_JPEG_DECODER>, + <&cru HCLK_JPEG_DECODER>, + <&cru ACLK_RGA2>, + <&cru HCLK_RGA2>; + pm_qos = <&qos_iep>, + <&qos_jpeg_dec>, + <&qos_jpeg_enc0>, + <&qos_jpeg_enc1>, + <&qos_jpeg_enc2>, + <&qos_jpeg_enc3>, + <&qos_rga2_mro>, + <&qos_rga2_mwo>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + + power-domain@RK3588_PD_AV1 { + reg = <RK3588_PD_AV1>; + clocks = <&cru PCLK_AV1>, + <&cru ACLK_AV1>, + <&cru HCLK_VDPU_ROOT>; + pm_qos = <&qos_av1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC0 { + reg = <RK3588_PD_RKVDEC0>; + clocks = <&cru HCLK_RKVDEC0>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>, + <&cru ACLK_RKVDEC0>; + pm_qos = <&qos_rkvdec0>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RKVDEC1 { + reg = <RK3588_PD_RKVDEC1>; + clocks = <&cru HCLK_RKVDEC1>, + <&cru HCLK_VDPU_ROOT>, + <&cru ACLK_VDPU_ROOT>; + pm_qos = <&qos_rkvdec1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_RGA30 { + reg = <RK3588_PD_RGA30>; + clocks = <&cru ACLK_RGA3_0>, + <&cru HCLK_RGA3_0>; + pm_qos = <&qos_rga3_0>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_VOP { + reg = <RK3588_PD_VOP>; + clocks = <&cru PCLK_VOP_ROOT>, + <&cru HCLK_VOP_ROOT>, + <&cru ACLK_VOP>; + pm_qos = <&qos_vop_m0>, + <&qos_vop_m1>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_VO0 { + reg = <RK3588_PD_VO0>; + clocks = <&cru PCLK_VO0_ROOT>, + <&cru PCLK_VO0_S_ROOT>, + <&cru HCLK_VO0_S_ROOT>, + <&cru ACLK_VO0_ROOT>, + <&cru HCLK_HDCP0>, + <&cru ACLK_HDCP0>, + <&cru HCLK_VOP_ROOT>; + pm_qos = <&qos_hdcp0>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_VO1 { + reg = <RK3588_PD_VO1>; + clocks = <&cru PCLK_VO1_ROOT>, + <&cru PCLK_VO1_S_ROOT>, + <&cru HCLK_VO1_S_ROOT>, + <&cru HCLK_HDCP1>, + <&cru ACLK_HDCP1>, + <&cru ACLK_HDMIRX_ROOT>, + <&cru HCLK_VO1USB_TOP_ROOT>; + pm_qos = <&qos_hdcp1>, + <&qos_hdmirx>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_VI { + reg = <RK3588_PD_VI>; + clocks = <&cru HCLK_VI_ROOT>, + <&cru PCLK_VI_ROOT>, + <&cru HCLK_ISP0>, + <&cru ACLK_ISP0>, + <&cru HCLK_VICAP>, + <&cru ACLK_VICAP>; + pm_qos = <&qos_isp0_mro>, + <&qos_isp0_mwo>, + <&qos_vicap_m0>, + <&qos_vicap_m1>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + power-domain@RK3588_PD_ISP1 { + reg = <RK3588_PD_ISP1>; + clocks = <&cru HCLK_ISP1>, + <&cru ACLK_ISP1>, + <&cru HCLK_VI_ROOT>, + <&cru PCLK_VI_ROOT>; + pm_qos = <&qos_isp1_mwo>, + <&qos_isp1_mro>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_FEC { + reg = <RK3588_PD_FEC>; + clocks = <&cru HCLK_FISHEYE0>, + <&cru ACLK_FISHEYE0>, + <&cru HCLK_FISHEYE1>, + <&cru ACLK_FISHEYE1>, + <&cru PCLK_VI_ROOT>; + pm_qos = <&qos_fisheye0>, + <&qos_fisheye1>; + #power-domain-cells = <0>; + }; + }; + power-domain@RK3588_PD_RGA31 { + reg = <RK3588_PD_RGA31>; + clocks = <&cru HCLK_RGA3_1>, + <&cru ACLK_RGA3_1>; + pm_qos = <&qos_rga3_1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_USB { + reg = <RK3588_PD_USB>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_USB_ROOT>, + <&cru ACLK_USB>, + <&cru HCLK_USB_ROOT>, + <&cru HCLK_HOST0>, + <&cru HCLK_HOST_ARB0>, + <&cru HCLK_HOST1>, + <&cru HCLK_HOST_ARB1>; + pm_qos = <&qos_usb3_0>, + <&qos_usb3_1>, + <&qos_usb2host_0>, + <&qos_usb2host_1>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_GMAC { + reg = <RK3588_PD_GMAC>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_PCIE_ROOT>, + <&cru ACLK_PHP_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_PCIE { + reg = <RK3588_PD_PCIE>; + clocks = <&cru PCLK_PHP_ROOT>, + <&cru ACLK_PCIE_ROOT>, + <&cru ACLK_PHP_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_SDIO { + reg = <RK3588_PD_SDIO>; + clocks = <&cru HCLK_SDIO>, + <&cru HCLK_NVM_ROOT>; + pm_qos = <&qos_sdio>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_AUDIO { + reg = <RK3588_PD_AUDIO>; + clocks = <&cru HCLK_AUDIO_ROOT>, + <&cru PCLK_AUDIO_ROOT>; + #power-domain-cells = <0>; + }; + power-domain@RK3588_PD_SDMMC { + reg = <RK3588_PD_SDMMC>; + pm_qos = <&qos_sdmmc>; + #power-domain-cells = <0>; + }; + }; + }; + + av1d: video-codec@fdc70000 { + compatible = "rockchip,rk3588-av1-vpu"; + reg = <0x0 0xfdc70000 0x0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + assigned-clock-rates = <400000000>, <400000000>; + clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3588_PD_AV1>; + resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; + }; + + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + + i2s4_8ch: i2s@fddc0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc0000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 0>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S4_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s5_8ch: i2s@fddf0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf0000 0x0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 2>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S5_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s9_8ch: i2s@fddfc000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddfc000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 23>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S9_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + qos_gpu_m0: qos@fdf35000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35000 0x0 0x20>; + }; + + qos_gpu_m1: qos@fdf35200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35200 0x0 0x20>; + }; + + qos_gpu_m2: qos@fdf35400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35400 0x0 0x20>; + }; + + qos_gpu_m3: qos@fdf35600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf35600 0x0 0x20>; + }; + + qos_rga3_1: qos@fdf36000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf36000 0x0 0x20>; + }; + + qos_sdio: qos@fdf39000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf39000 0x0 0x20>; + }; + + qos_sdmmc: qos@fdf3d800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3d800 0x0 0x20>; + }; + + qos_usb3_1: qos@fdf3e000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e000 0x0 0x20>; + }; + + qos_usb3_0: qos@fdf3e200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e200 0x0 0x20>; + }; + + qos_usb2host_0: qos@fdf3e400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e400 0x0 0x20>; + }; + + qos_usb2host_1: qos@fdf3e600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf3e600 0x0 0x20>; + }; + + qos_fisheye0: qos@fdf40000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40000 0x0 0x20>; + }; + + qos_fisheye1: qos@fdf40200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40200 0x0 0x20>; + }; + + qos_isp0_mro: qos@fdf40400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40400 0x0 0x20>; + }; + + qos_isp0_mwo: qos@fdf40500 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40500 0x0 0x20>; + }; + + qos_vicap_m0: qos@fdf40600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40600 0x0 0x20>; + }; + + qos_vicap_m1: qos@fdf40800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf40800 0x0 0x20>; + }; + + qos_isp1_mwo: qos@fdf41000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf41000 0x0 0x20>; + }; + + qos_isp1_mro: qos@fdf41100 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf41100 0x0 0x20>; + }; + + qos_rkvenc0_m0ro: qos@fdf60000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60000 0x0 0x20>; + }; + + qos_rkvenc0_m1ro: qos@fdf60200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60200 0x0 0x20>; + }; + + qos_rkvenc0_m2wo: qos@fdf60400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf60400 0x0 0x20>; + }; + + qos_rkvenc1_m0ro: qos@fdf61000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61000 0x0 0x20>; + }; + + qos_rkvenc1_m1ro: qos@fdf61200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61200 0x0 0x20>; + }; + + qos_rkvenc1_m2wo: qos@fdf61400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf61400 0x0 0x20>; + }; + + qos_rkvdec0: qos@fdf62000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf62000 0x0 0x20>; + }; + + qos_rkvdec1: qos@fdf63000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf63000 0x0 0x20>; + }; + + qos_av1: qos@fdf64000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf64000 0x0 0x20>; + }; + + qos_iep: qos@fdf66000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66000 0x0 0x20>; + }; + + qos_jpeg_dec: qos@fdf66200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66200 0x0 0x20>; + }; + + qos_jpeg_enc0: qos@fdf66400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66400 0x0 0x20>; + }; + + qos_jpeg_enc1: qos@fdf66600 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66600 0x0 0x20>; + }; + + qos_jpeg_enc2: qos@fdf66800 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66800 0x0 0x20>; + }; + + qos_jpeg_enc3: qos@fdf66a00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66a00 0x0 0x20>; + }; + + qos_rga2_mro: qos@fdf66c00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66c00 0x0 0x20>; + }; + + qos_rga2_mwo: qos@fdf66e00 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf66e00 0x0 0x20>; + }; + + qos_rga3_0: qos@fdf67000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf67000 0x0 0x20>; + }; + + qos_vdpu: qos@fdf67200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf67200 0x0 0x20>; + }; + + qos_npu1: qos@fdf70000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf70000 0x0 0x20>; + }; + + qos_npu2: qos@fdf71000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf71000 0x0 0x20>; + }; + + qos_npu0_mwr: qos@fdf72000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72000 0x0 0x20>; + }; + + qos_npu0_mro: qos@fdf72200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72200 0x0 0x20>; + }; + + qos_mcu_npu: qos@fdf72400 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf72400 0x0 0x20>; + }; + + qos_hdcp0: qos@fdf80000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf80000 0x0 0x20>; + }; + + qos_hdcp1: qos@fdf81000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf81000 0x0 0x20>; + }; + + qos_hdmirx: qos@fdf81200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf81200 0x0 0x20>; + }; + + qos_vop_m0: qos@fdf82000 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf82000 0x0 0x20>; + }; + + qos_vop_m1: qos@fdf82200 { + compatible = "rockchip,rk3588-qos", "syscon"; + reg = <0x0 0xfdf82200 0x0 0x20>; + }; + + dfi: dfi@fe060000 { + reg = <0x00 0xfe060000 0x00 0x10000>; + compatible = "rockchip,rk3588-dfi"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmu1grf>; + }; + + pcie2x1l1: pcie@fe180000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + bus-range = <0x30 0x3f>; + clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>, + <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>, + <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>, + <0 0 0 2 &pcie2x1l1_intc 1>, + <0 0 0 3 &pcie2x1l1_intc 2>, + <0 0 0 4 &pcie2x1l1_intc 3>; + linux,pci-domain = <3>; + max-link-speed = <2>; + msi-map = <0x3000 &its0 0x3000 0x1000>; + num-lanes = <1>; + phys = <&combphy2_psu PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>, + <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>; + reg = <0xa 0x40c00000 0x0 0x00400000>, + <0x0 0xfe180000 0x0 0x00010000>, + <0x0 0xf3000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>; + reset-names = "pwr", "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie2x1l1_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + pcie2x1l2: pcie@fe190000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + bus-range = <0x40 0x4f>; + clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>, + <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>, + <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>, + <0 0 0 2 &pcie2x1l2_intc 1>, + <0 0 0 3 &pcie2x1l2_intc 2>, + <0 0 0 4 &pcie2x1l2_intc 3>; + linux,pci-domain = <4>; + max-link-speed = <2>; + msi-map = <0x4000 &its0 0x4000 0x1000>; + num-lanes = <1>; + phys = <&combphy0_ps PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, + <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>; + reg = <0xa 0x41000000 0x0 0x00400000>, + <0x0 0xfe190000 0x0 0x00010000>, + <0x0 0xf4000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>; + reset-names = "pwr", "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie2x1l2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + gmac1: ethernet@fe1c0000 { + compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe1c0000 0x0 0x10000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, + <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>, + <&cru CLK_GMAC1_PTP_REF>; + clock-names = "stmmaceth", "clk_mac_ref", + "pclk_mac", "aclk_mac", + "ptp_ref"; + power-domains = <&power RK3588_PD_GMAC>; + resets = <&cru SRST_A_GMAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&sys_grf>; + rockchip,php-grf = <&php_grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + }; + + sata0: sata@fe210000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe210000 0 0x1000>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, + <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, + <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy0_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + sata2: sata@fe230000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe230000 0 0x1000>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>, + <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>, + <&cru CLK_PIPEPHY2_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy2_psu PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + sfc: spi@fe2b0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sdmmc: mmc@fe2c0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + power-domains = <&power RK3588_PD_SDMMC>; + status = "disabled"; + }; + + sdio: mmc@fe2d0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x00 0xfe2d0000 0x00 0x4000>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>; + power-domains = <&power RK3588_PD_SDIO>; + status = "disabled"; + }; + + sdhci: mmc@fe2e0000 { + compatible = "rockchip,rk3588-dwcmshc"; + reg = <0x0 0xfe2e0000 0x0 0x10000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>, <200000000>; + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, + <&cru TMCLK_EMMC>; + clock-names = "core", "bus", "axi", "block", "timer"; + max-frequency = <200000000>; + pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, + <&emmc_cmd>, <&emmc_data_strobe>; + pinctrl-names = "default"; + resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, + <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, + <&cru SRST_T_EMMC>; + reset-names = "core", "bus", "axi", "block", "timer"; + status = "disabled"; + }; + + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@fe600000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ + <0x0 0xfe680000 0 0x100000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-controller; + mbi-alias = <0x0 0xfe610000>; + mbi-ranges = <424 56>; + msi-controller; + ranges; + #address-cells = <2>; + #interrupt-cells = <4>; + #size-cells = <2>; + + its0: msi-controller@fe640000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe640000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + its1: msi-controller@fe660000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe660000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + ppi-partitions { + ppi_partition0: interrupt-partition-0 { + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; + }; + + ppi_partition1: interrupt-partition-1 { + affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>; + }; + }; + }; + + dmac0: dma-controller@fea10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfea10000 0x0 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dma-controller@fea30000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfea30000 0x0 0x4000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + i2c1: i2c@fea90000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfea90000 0x0 0x1000>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c1m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@feaa0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeaa0000 0x0 0x1000>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c2m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@feab0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeab0000 0x0 0x1000>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@feac0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeac0000 0x0 0x1000>; + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c4m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@fead0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfead0000 0x0 0x1000>; + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c5m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + timer0: timer@feae0000 { + compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xfeae0000 0x0 0x20>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; + clock-names = "pclk", "timer"; + }; + + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + spi0: spi@feb00000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb00000 0x0 0x1000>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 14>, <&dmac0 15>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@feb10000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb10000 0x0 0x1000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 16>, <&dmac0 17>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@feb20000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb20000 0x0 0x1000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 15>, <&dmac1 16>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@feb30000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfeb30000 0x0 0x1000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 17>, <&dmac1 18>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@feb40000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb40000 0x0 0x100>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart1m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@feb50000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb50000 0x0 0x100>; + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@feb60000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb60000 0x0 0x100>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 12>, <&dmac0 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart3m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@feb70000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb70000 0x0 0x100>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 9>, <&dmac1 10>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart4m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@feb80000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb80000 0x0 0x100>; + interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 11>, <&dmac1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart5m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart6: serial@feb90000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeb90000 0x0 0x100>; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 13>, <&dmac1 14>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart6m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart7: serial@feba0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfeba0000 0x0 0x100>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 7>, <&dmac2 8>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart7m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart8: serial@febb0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfebb0000 0x0 0x100>; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 9>, <&dmac2 10>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart8m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart9: serial@febc0000 { + compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfebc0000 0x0 0x100>; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac2 11>, <&dmac2 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&uart9m1_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + pwm4: pwm@febd0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0000 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm4m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@febd0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0010 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm5m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@febd0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0020 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm6m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@febd0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebd0030 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm7m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm8: pwm@febe0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0000 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@febe0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0010 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@febe0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0020 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@febe0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebe0030 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm11m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm12: pwm@febf0000 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0000 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm12m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm13: pwm@febf0010 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0010 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm13m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm14: pwm@febf0020 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0020 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm14m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm15: pwm@febf0030 { + compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfebf0030 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm15m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + thermal_zones: thermal-zones { + /* sensor near the center of the SoC */ + package_thermal: package-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 0>; + + trips { + package_crit: package-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + /* sensor between A76 cores 0 and 1 */ + bigcore0_thermal: bigcore0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 1>; + + trips { + bigcore0_alert: bigcore0-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + bigcore0_crit: bigcore0-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&bigcore0_alert>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor between A76 cores 2 and 3 */ + bigcore2_thermal: bigcore2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 2>; + + trips { + bigcore2_alert: bigcore2-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + bigcore2_crit: bigcore2-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&bigcore2_alert>; + cooling-device = + <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor between the four A55 cores */ + little_core_thermal: littlecore-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 3>; + + trips { + littlecore_alert: littlecore-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + littlecore_crit: littlecore-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&littlecore_alert>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + /* sensor near the PD_CENTER power domain */ + center_thermal: center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 4>; + + trips { + center_crit: center-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&tsadc 5>; + + trips { + gpu_alert: gpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + npu_thermal: npu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsadc 6>; + + trips { + npu_crit: npu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + saradc: adc@fec10000 { + compatible = "rockchip,rk3588-saradc"; + reg = <0x0 0xfec10000 0x0 0x10000>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + i2c6: i2c@fec80000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfec80000 0x0 0x1000>; + clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c6m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@fec90000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfec90000 0x0 0x1000>; + clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c7m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@feca0000 { + compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfeca0000 0x0 0x1000>; + clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&i2c8m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@fecb0000 { + compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xfecb0000 0x0 0x1000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac2 13>, <&dmac2 14>; + dma-names = "tx", "rx"; + num-cs = <2>; + pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + otp: efuse@fecc0000 { + compatible = "rockchip,rk3588-otp"; + reg = <0x0 0xfecc0000 0x0 0x400>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; + clock-names = "otp", "apb_pclk", "phy", "arb"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, + <&cru SRST_OTPC_ARB>; + reset-names = "otp", "apb", "arb"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + + otp_id: id@7 { + reg = <0x07 0x10>; + }; + + cpub0_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + cpub1_leakage: cpu-leakage@18 { + reg = <0x18 0x1>; + }; + + cpul_leakage: cpu-leakage@19 { + reg = <0x19 0x1>; + }; + + log_leakage: log-leakage@1a { + reg = <0x1a 0x1>; + }; + + gpu_leakage: gpu-leakage@1b { + reg = <0x1b 0x1>; + }; + + otp_cpu_version: cpu-version@1c { + reg = <0x1c 0x1>; + bits = <3 3>; + }; + + npu_leakage: npu-leakage@28 { + reg = <0x28 0x1>; + }; + + codec_leakage: codec-leakage@29 { + reg = <0x29 0x1>; + }; + }; + + dmac2: dma-controller@fed10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfed10000 0x0 0x4000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + hdptxphy_hdmi0: phy@fed60000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed60000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, + <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, + <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, + <&cru SRST_HDPTX0_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", + "lcpll"; + rockchip,grf = <&hdptxphy0_grf>; + status = "disabled"; + }; + + usbdp_phy0: phy@fed80000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed80000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY0_IMMORTAL>, + <&cru PCLK_USBDPPHY0>, + <&u2phy0>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, + <&cru SRST_USBDP_COMBO_PHY0_CMN>, + <&cru SRST_USBDP_COMBO_PHY0_LANE>, + <&cru SRST_USBDP_COMBO_PHY0_PCS>, + <&cru SRST_P_USBDPPHY0>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy0_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy0_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + + combphy0_ps: phy@fee00000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee00000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy0_grf>; + status = "disabled"; + }; + + combphy2_psu: phy@fee20000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee20000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY2>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy2_grf>; + status = "disabled"; + }; + + system_sram2: sram@ff001000 { + compatible = "mmio-sram"; + reg = <0x0 0xff001000 0x0 0xef000>; + ranges = <0x0 0x0 0xff001000 0xef000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3588-pinctrl"; + ranges; + rockchip,grf = <&ioc>; + #address-cells = <2>; + #size-cells = <2>; + + gpio0: gpio@fd8a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfd8a0000 0x0 0x100>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio1: gpio@fec20000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec20000 0x0 0x100>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio2: gpio@fec30000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec30000 0x0 0x100>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio3: gpio@fec40000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec40000 0x0 0x100>; + interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gpio4: gpio@fec50000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfec50000 0x0 0x100>; + interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rk3588-base-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi index 709d348cf06b..03fd193be253 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi @@ -466,3 +466,7 @@ }; }; }; + +&tsadc { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 7be2190244ba..00f660d50127 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -878,6 +878,8 @@ vdd_cpu_big1_s0: dcdc-reg1 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -890,6 +892,8 @@ vdd_cpu_big0_s0: dcdc-reg2 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -902,6 +906,8 @@ vdd_cpu_lit_s0: dcdc-reg3 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; @@ -926,6 +932,8 @@ vdd_cpu_big1_mem_s0: dcdc-reg5 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -939,6 +947,8 @@ vdd_cpu_big0_mem_s0: dcdc-reg6 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -963,6 +973,8 @@ vdd_cpu_lit_mem_s0: dcdc-reg8 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; @@ -1131,6 +1143,10 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi index 244c66faa161..244c66faa161 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi new file mode 100644 index 000000000000..0ce0934ec6b7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include "rk3588-base.dtsi" +#include "rk3588-extra-pinctrl.dtsi" + +/ { + usb_host1_xhci: usb@fc400000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfc400000 0x0 0x400000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + dr_mode = "otg"; + phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG1>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + status = "disabled"; + }; + + pcie30_phy_grf: syscon@fd5b8000 { + compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; + reg = <0x0 0xfd5b8000 0x0 0x10000>; + }; + + pipe_phy1_grf: syscon@fd5c0000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c0000 0x0 0x100>; + }; + + usbdpphy1_grf: syscon@fd5cc000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5cc000 0x0 0x4000>; + }; + + usb2phy1_grf: syscon@fd5d4000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d4000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy1: usb2phy@4000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x4000 0x10>; + #clock-cells = <0>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; + reset-names = "phy", "apb"; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pcie3x4: pcie@fe150000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0x0f>; + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x4_intc 0>, + <0 0 0 2 &pcie3x4_intc 1>, + <0 0 0 3 &pcie3x4_intc 2>, + <0 0 0 4 &pcie3x4_intc 3>; + linux,pci-domain = <0>; + max-link-speed = <3>; + msi-map = <0x0000 &its1 0x0000 0x1000>; + num-lanes = <4>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, + <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>; + reg = <0xa 0x40000000 0x0 0x00400000>, + <0x0 0xfe150000 0x0 0x00010000>, + <0x0 0xf0000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie3x4_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + pcie3x4_ep: pcie-ep@fe150000 { + compatible = "rockchip,rk3588-pcie-ep"; + reg = <0xa 0x40000000 0x0 0x00100000>, + <0xa 0x40100000 0x0 0x00100000>, + <0x0 0xfe150000 0x0 0x00010000>, + <0x9 0x00000000 0x0 0x40000000>, + <0xa 0x40300000 0x0 0x00100000>; + reg-names = "dbi", "dbi2", "apb", "addr_space", "atu"; + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err", + "dma0", "dma1", "dma2", "dma3"; + max-link-speed = <3>; + num-lanes = <4>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; + reset-names = "pwr", "pipe"; + status = "disabled"; + }; + + pcie3x2: pcie@fe160000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x10 0x1f>; + clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>, + <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>, + <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, + <0 0 0 2 &pcie3x2_intc 1>, + <0 0 0 3 &pcie3x2_intc 2>, + <0 0 0 4 &pcie3x2_intc 3>; + linux,pci-domain = <1>; + max-link-speed = <3>; + msi-map = <0x1000 &its1 0x1000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>, + <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>; + reg = <0xa 0x40400000 0x0 0x00400000>, + <0x0 0xfe160000 0x0 0x00010000>, + <0x0 0xf1000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie3x2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + pcie2x1l0: pcie@fe170000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + bus-range = <0x20 0x2f>; + clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>, + <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>, + <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>, + <0 0 0 2 &pcie2x1l0_intc 1>, + <0 0 0 3 &pcie2x1l0_intc 2>, + <0 0 0 4 &pcie2x1l0_intc 3>; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its0 0x2000 0x1000>; + num-lanes = <1>; + phys = <&combphy1_ps PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, + <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>; + reg = <0xa 0x40800000 0x0 0x00400000>, + <0x0 0xfe170000 0x0 0x00010000>, + <0x0 0xf2000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>; + reset-names = "pwr", "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie2x1l0_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + gmac0: ethernet@fe1b0000 { + compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, + <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>, + <&cru CLK_GMAC0_PTP_REF>; + clock-names = "stmmaceth", "clk_mac_ref", + "pclk_mac", "aclk_mac", + "ptp_ref"; + power-domains = <&power RK3588_PD_GMAC>; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&sys_grf>; + rockchip,php-grf = <&php_grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + }; + + sata1: sata@fe220000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe220000 0 0x1000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, + <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, + <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy1_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + usbdp_phy1: phy@fed90000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed90000 0x0 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY1_IMMORTAL>, + <&cru PCLK_USBDPPHY1>, + <&u2phy1>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, + <&cru SRST_USBDP_COMBO_PHY1_CMN>, + <&cru SRST_USBDP_COMBO_PHY1_LANE>, + <&cru SRST_USBDP_COMBO_PHY1_PCS>, + <&cru SRST_P_USBDPPHY1>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy1_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy1_grf>; + rockchip,vo-grf = <&vo0_grf>; + status = "disabled"; + }; + + combphy1_ps: phy@fee10000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee10000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy1_grf>; + status = "disabled"; + }; + + pcie30phy: phy@fee80000 { + compatible = "rockchip,rk3588-pcie3-phy"; + reg = <0x0 0xfee80000 0x0 0x20000>; + #phy-cells = <0>; + clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>; + clock-names = "pclk"; + resets = <&cru SRST_PCIE30_PHY>; + reset-names = "phy"; + rockchip,pipe-grf = <&php_grf>; + rockchip,phy-grf = <&pcie30_phy_grf>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts new file mode 100644 index 000000000000..83103e4c7216 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts @@ -0,0 +1,778 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Thomas McKahan + * Copyright (c) 2024 Sebastian Kropatsch + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588-friendlyelec-cm3588.dtsi" + +/ { + model = "FriendlyElec CM3588 NAS"; + compatible = "friendlyarm,cm3588-nas", "friendlyarm,cm3588", "rockchip,rk3588"; + + adc_key_recovery: adc-key-recovery { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <17000>; + }; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&headphone_detect>; + + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "realtek,rt5616-codec"; + + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "MIC1", "Microphone Jack", + "Microphone Jack", "micbias1"; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Microphone Jack"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + }; + + buzzer: pwm-beeper { + compatible = "pwm-beeper"; + amp-supply = <&vcc_5v0_sys>; + beeper-hz = <500>; + pwms = <&pwm8 0 500000 0>; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 50 80 120 160 220>; + fan-supply = <&vcc_5v0_sys>; + pwms = <&pwm1 0 50000 0>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key1_pin>; + + button-user { + debounce-interval = <50>; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>; + label = "User Button"; + linux,code = <BTN_1>; + wakeup-source; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + vcc_12v_dcin: regulator-vcc-12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc_12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_3v3_m2_a: regulator-vcc-3v3-m2-a { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_m2_a"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_12v_dcin>; + }; + + vcc_3v3_m2_b: regulator-vcc-3v3-m2-b { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_m2_b"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_12v_dcin>; + }; + + vcc_3v3_m2_c: regulator-vcc-3v3-m2-c { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_m2_c"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_12v_dcin>; + }; + + vcc_3v3_m2_d: regulator-vcc-3v3-m2-d { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_m2_d"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_12v_dcin>; + }; + + /* vcc_5v0_sys powers the peripherals */ + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_12v_dcin>; + }; + + /* SY6280AAC power switch (U14 in schematics) */ + vcc_5v0_host_20: regulator-vcc-5v0-host-20 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_5v0_host20_en>; + regulator-name = "vcc_5v0_host_20"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_sys>; + }; + + /* SY6280AAC power switch (U8 in schematics) */ + vcc_5v0_host_30_p1: regulator-vcc-5v0-host-30-p1 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_5v0_host30p1_en>; + regulator-name = "vcc_5v0_host_30_p1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_sys>; + }; + + /* SY6280AAC power switch (U9 in schematics) */ + vcc_5v0_host_30_p2: regulator-vcc-5v0-host-30-p2 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_5v0_host30p2_en>; + regulator-name = "vcc_5v0_host_30_p2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_sys>; + }; + + /* SY6280AAC power switch (U10 in schematics) */ + vbus_5v0_typec: regulator-vbus-5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec_5v_pwr_en>; + regulator-name = "vbus_5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_sys>; + }; +}; + +/* vcc_4v0_sys powers the RK806 and RK860's */ +&vcc_4v0_sys { + vin-supply = <&vcc_12v_dcin>; +}; + +/* Combo PHY 1 is configured to act as as PCIe 2.0 PHY */ +/* Used by PCIe controller 2 (pcie2x1l0) */ +&combphy1_ps { + status = "okay"; +}; + +/* Combo PHY 2 is configured to act as USB3 PHY */ +/* Used by USB 3.0 OTG 2 controller (USB 3.0 Type-A port 2) */ +/* CM3588 USB Controller Config Table: USB30 HOST2 */ +&combphy2_psu { + status = "okay"; +}; + +/* GPIO names are in the format "Human-readable-name [SIGNAL_LABEL]" */ +/* Signal labels match the official CM3588 NAS SDK schematic revision 2309 */ +&gpio0 { + gpio-line-names = + /* GPIO0 A0-A7 */ + "", "", "", "", + "MicroSD detect [SDMMC_DET_L]", "", "", "", + /* GPIO0 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 C0-C7 */ + "", "", "", "", + "Pin 10 [UART0_RX_M0]", "Pin 08 [UART0_TX_M0/PWM4_M0]", "Pin 32 [PWM5_M1]", "", + /* GPIO0 D0-D7 */ + "", "", "", "USB3 Type-C [CC_INT_L]", + "IR receiver [PWM3_IR_M0]", "User Button", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1 A0-A7 */ + "Pin 27 [UART6_RX_M1]", "Pin 28 [UART6_TX_M1]", "", "", + "USB2 Type-A [USB2_PWREN]", "", "", "Pin 15", + /* GPIO1 B0-B7 */ + "Pin 26", "Pin 21 [SPI0_MISO_M2]", "Pin 19 [SPI0_MOSI_M2/UART4_RX_M2]", "Pin 23 [SPI0_CLK_M2/UART4_TX_M2]", + "Pin 24 [SPI0_CS0_M2/UART7_RX_M2]", "Pin 22 [SPI0_CS1_M0/UART7_TX_M2]", "", "CSI-Pin 14 [MIPI_CAM2_CLKOUT]", + /* GPIO1 C0-C7 */ + "", "", "", "", + "Headphone detect [HP_DET_L]", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "USB3 Type-C [TYPEC5V_PWREN_H]", "5V Fan [PWM1_M1]", + "", "HDMI-in detect [HDMIIRX_DET_L]", "Pin 05 [I2C8_SCL_M2]", "Pin 03 [I2C8_SDA_M2]"; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2 A0-A7 */ + "", "", "", "", + "", "", "SPI NOR Flash [FSPI_D0_M1]", "SPI NOR Flash [FSPI_D1_M1]", + /* GPIO2 B0-B7 */ + "SPI NOR Flash [FSPI_D2_M1]", "SPI NOR Flash [FSPI_D3_M1]", "", "SPI NOR Flash [FSPI_CLK_M1]", + "SPI NOR Flash [FSPI_CSN0_M1]", "", "", "", + /* GPIO2 C0-C7 */ + "", "CSI-Pin 11 [MIPI_CAM2_RESET_L]", "CSI-Pin 12 [MIPI_CAM2_PDN_L]", "", + "", "", "", "", + /* GPIO2 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3 A0-A7 */ + "Pin 35 [SPI4_MISO_M1/PWM10_M0]", "Pin 38 [SPI4_MOSI_M1]", "Pin 40 [SPI4_CLK_M1/UART8_TX_M1]", "Pin 36 [SPI4_CS0_M1/UART8_RX_M1]", + "Pin 37 [SPI4_CS1_M1]", "USB3-A #2 [USB3_2_PWREN]", "DSI-Pin 12 [LCD_RST]", "Buzzer [PWM8_M0]", + /* GPIO3 B0-B7 */ + "Pin 33 [PWM9_M0]", "DSI-Pin 10 [PWM2_M1/LCD_BL]", "Pin 07", "Pin 16", + "Pin 18", "Pin 29 [UART3_TX_M1/PWM12_M0]", "Pin 31 [UART3_RX_M1/PWM13_M0]", "Pin 12", + /* GPIO3 C0-C7 */ + "DSI-Pin 08 [TP_INT_L]", "DSI-Pin 14 [TP_RST_L]", "Pin 11 [PWM14_M0]", "Pin 13 [PWM15_IR_M0]", + "", "", "", "DSI-Pin 06 [I2C5_SCL_M0_TP]", + /* GPIO3 D0-D7 */ + "DSI-Pin 05 [I2C5_SDA_M0_TP]", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + /* GPIO4 A0-A7 */ + "", "", "M.2 M-Key Slot4 [M2_D_PERST_L]", "", + "", "", "", "", + /* GPIO4 B0-B7 */ + "USB3-A #1 [USB3_TYPEC1_PWREN]", "", "", "M.2 M-Key Slot3 [M2_C_PERST_L]", + "M.2 M-Key Slot2 [M2_B_PERST_L]", "M.2 M-Key Slot1 [M2_A_CLKREQ_L]", "M.2 M-Key Slot1 [M2_A_PERST_L]", "", + /* GPIO4 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO4 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +/* Connected to MIPI-DSI0 */ +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m0_xfer>; + status = "disabled"; +}; + +&i2c6 { + fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus_5v0_typec>; + + usb_con: connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + power-role = "source"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + try-power-role = "source"; + vbus-supply = <&vbus_5v0_typec>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_role_sw: endpoint { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + + port@2 { + reg = <2>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; +}; + +/* Connected to MIPI-CSI1 */ +/* &i2c7 */ + +/* GPIO Connector, connected to 40-pin GPIO header */ +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8m2_xfer>; + status = "okay"; +}; + +&pcie2x1l0 { + /* 2. M.2 socket, CON14: pcie30phy port0 lane1, @fe170000 */ + max-link-speed = <3>; + num-lanes = <1>; + phys = <&pcie30phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_b>; + status = "okay"; +}; + +&pcie2x1l1 { + /* 4. M.2 socket, CON16: pcie30phy port1 lane1, @fe180000 */ + max-link-speed = <3>; + num-lanes = <1>; + phys = <&pcie30phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_d>; + status = "okay"; +}; + +&pcie30phy { + /* + * Data lane mapping <1 3 2 4> = x1x1 x1x1 (bifurcation of both ports) + * port 0 lane 0 - always mapped to controller 0 (4L) + * port 0 lane 1 - map to controller 2 (1L0) + * port 1 lane 0 - map to controller 1 (2L) + * port 1 lane 1 - map to controller 3 (1L1) + */ + data-lanes = <1 3 2 4>; + status = "okay"; +}; + +&pcie3x4 { + /* 1. M.2 socket, CON13: pcie30phy port0 lane0, @fe150000 */ + max-link-speed = <3>; + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x4_rst>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_a>; + status = "okay"; +}; + +&pcie3x2 { + /* 3. M.2 socket, CON15: pcie30phy port1 lane0, @fe160000 */ + max-link-speed = <3>; + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3x2_rst>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_c>; + status = "okay"; +}; + +&pinctrl { + audio { + headphone_detect: headphone-detect { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-key { + key1_pin: key1-pin { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3x2_rst: pcie3x2-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3x4_rst: pcie3x4-rst { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc_5v0_host20_en: vcc-5v0-host20-en { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc_5v0_host30p1_en: vcc-5v0-host30p1-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc_5v0_host30p2_en: vcc-5v0-host30p2-en { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec_5v_pwr_en: typec-5v-pwr-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* Connected to 5V Fan */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1m1_pins>; + status = "okay"; +}; + +/* Connected to MIPI-DSI0 */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2m1_pins>; +}; + +/* Connected to IR Receiver */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3m0_pins>; + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with UART0 */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m1_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +/* Connected to Buzzer */ +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm8m0_pins>; + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +&pwm9 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm9m0_pins>; + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with SPI4 */ +&pwm10 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm10m0_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with UART3 */ +&pwm12 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm12m0_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with UART3 */ +&pwm13 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm13m0_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +&pwm14 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm14m0_pins>; + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Optimized for infrared applications */ +&pwm15 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm15m0_pins>; + status = "disabled"; +}; + +/* microSD card */ +&sdmmc { + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with UART4, UART7 and PWM10 */ +&spi0 { + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0m2_cs0 &spi0m2_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with UART8 */ +&spi4 { + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4m1_cs0 &spi4m1_pins>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with PWM4 */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0m0_xfer>; + status = "disabled"; +}; + +/* Debug UART */ +&uart2 { + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with PWM12 and PWM13 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3m1_xfer>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with SPI0 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m2_xfer>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer>; + status = "okay"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with SPI0 */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7m2_xfer>; + status = "disabled"; +}; + +/* GPIO Connector, connected to 40-pin GPIO header */ +/* Shared with SPI4 */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8m1_xfer>; + status = "disabled"; +}; + +/* USB2 PHY for USB Type-C port */ +/* CM3588 USB Controller Config Table: USB20 OTG0 */ +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vbus_5v0_typec>; + status = "okay"; +}; + +/* USB2 PHY for USB 3.0 Type-A port 1 */ +/* CM3588 USB Controller Config Table: USB20 OTG1 */ +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_host_30_p1>; + status = "okay"; +}; + +/* USB2 PHY for USB 2.0 Type-A */ +/* CM3588 USB Controller Config Table: USB20 HOST0 */ +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc_5v0_host_20>; + status = "okay"; +}; + +/* USB2 PHY for USB 3.0 Type-A port 2 */ +/* CM3588 USB Controller Config Table: USB20 HOST1 */ +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc_5v0_host_30_p2>; + status = "okay"; +}; + +/* USB 2.0 Type-A */ +/* PHY: <&u2phy2_host> */ +&usb_host0_ehci { + status = "okay"; +}; + +/* USB 2.0 Type-A */ +/* PHY: <&u2phy2_host> */ +&usb_host0_ohci { + status = "okay"; +}; + +/* USB Type-C */ +/* PHYs: <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3> */ +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + dwc3_0_role_switch: endpoint { + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +/* Lower USB 3.0 Type-A (port 2) */ +/* PHY: <&u2phy3_host> */ +&usb_host1_ehci { + status = "okay"; +}; + +/* Lower USB 3.0 Type-A (port 2) */ +/* PHY: <&u2phy3_host> */ +&usb_host1_ohci { + status = "okay"; +}; + +/* Upper USB 3.0 Type-A (port 1) */ +/* PHYs: <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3> */ +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +/* Lower USB 3.0 Type-A (port 2) */ +/* PHYs: <&combphy2_psu PHY_TYPE_USB3> */ +&usb_host2_xhci { + status = "okay"; +}; + +/* USB3 PHY for USB Type-C port */ +/* CM3588 USB Controller Config Table: USB30 OTG0 */ +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +/* USB3 PHY for USB 3.0 Type-A port 1 */ +/* CM3588 USB Controller Config Table: USB30 OTG1 */ +&usbdp_phy1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi new file mode 100644 index 000000000000..e3a9598b99fc --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi @@ -0,0 +1,653 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Thomas McKahan + * Copyright (c) 2024 Sebastian Kropatsch + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + model = "FriendlyElec CM3588"; + compatible = "friendlyarm,cm3588", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: led-0 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_sys_pin>; + }; + + led_usr: led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led_usr_pin>; + }; + }; + + /* vcc_4v0_sys powers the RK806 and RK860's */ + vcc_4v0_sys: regulator-vcc-4v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_4v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + }; + + vcc_3v3_pcie20: regulator-vcc-3v3-pcie20 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_pcie20"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-1v1-nldo-s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_4v0_sys>; + }; +}; + +/* Combo PHY 0 is configured to act as as PCIe 2.0 PHY */ +/* Used by PCIe controller 4 (pcie2x1l2) */ +&combphy0_ps { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + sram-supply = <&vdd_gpu_mem_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + clock-frequency = <200000>; + status = "okay"; + + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + +&i2s7_8ch { + status = "okay"; +}; + +&pcie2x1l2 { + /* r8125 ethernet, @fe190000 */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + led_sys_pin: led-sys-pin { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_usr_pin: led-usr-pin { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: rtc-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +/* eMMC */ +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +/* microSD card */ +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + rk806_single: pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc_4v0_sys>; + vcc2-supply = <&vcc_4v0_sys>; + vcc3-supply = <&vcc_4v0_sys>; + vcc4-supply = <&vcc_4v0_sys>; + vcc5-supply = <&vcc_4v0_sys>; + vcc6-supply = <&vcc_4v0_sys>; + vcc7-supply = <&vcc_4v0_sys>; + vcc8-supply = <&vcc_4v0_sys>; + vcc9-supply = <&vcc_4v0_sys>; + vcc10-supply = <&vcc_4v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_4v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_4v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +/* Debug UART */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts index 009566d881f3..c2a08bdf09e8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts @@ -261,8 +261,7 @@ &mdio0 { rgmii_phy0: ethernet-phy@1 { /* RTL8211F */ - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; pinctrl-names = "default"; pinctrl-0 = <&rtl8211f_0_rst>; @@ -275,8 +274,7 @@ &mdio1 { rgmii_phy1: ethernet-phy@2 { /* RTL8211F */ - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x2>; pinctrl-names = "default"; pinctrl-0 = <&rtl8211f_1_rst>; @@ -376,6 +374,10 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi new file mode 100644 index 000000000000..0f1a77697351 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/ { + cluster0_opp_table: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <675000 675000 950000>; + clock-latency-ns = <40000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <712500 712500 950000>; + clock-latency-ns = <40000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <762500 762500 950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <850000 850000 950000>; + clock-latency-ns = <40000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <950000 950000 950000>; + clock-latency-ns = <40000>; + }; + }; + + cluster1_opp_table: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <675000 675000 1000000>; + clock-latency-ns = <40000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <725000 725000 1000000>; + clock-latency-ns = <40000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <762500 762500 1000000>; + clock-latency-ns = <40000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <850000 850000 1000000>; + clock-latency-ns = <40000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <925000 925000 1000000>; + clock-latency-ns = <40000>; + }; + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <987500 987500 1000000>; + clock-latency-ns = <40000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-microvolt = <1000000 1000000 1000000>; + clock-latency-ns = <40000>; + }; + }; + + cluster2_opp_table: opp-table-cluster2 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <675000 675000 1000000>; + clock-latency-ns = <40000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <725000 725000 1000000>; + clock-latency-ns = <40000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <762500 762500 1000000>; + clock-latency-ns = <40000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <850000 850000 1000000>; + clock-latency-ns = <40000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <925000 925000 1000000>; + clock-latency-ns = <40000>; + }; + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <987500 987500 1000000>; + clock-latency-ns = <40000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-microvolt = <1000000 1000000 1000000>; + clock-latency-ns = <40000>; + }; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <700000 700000 850000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <800000 800000 850000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <850000 850000 850000>; + }; + }; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp_table>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp_table>; +}; + +&cpu_b2 { + operating-points-v2 = <&cluster2_opp_table>; +}; + +&cpu_b3 { + operating-points-v2 = <&cluster2_opp_table>; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index e80caa36f8e4..e4a20cda65ed 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -833,6 +833,8 @@ regulator-name = "vdd_cpu_big1_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -846,6 +848,8 @@ regulator-name = "vdd_cpu_big0_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -859,6 +863,8 @@ regulator-name = "vdd_cpu_lit_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; @@ -885,6 +891,8 @@ regulator-name = "vdd_cpu_big1_mem_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -899,6 +907,8 @@ regulator-name = "vdd_cpu_big0_mem_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -925,6 +935,8 @@ regulator-name = "vdd_cpu_lit_mem_s0"; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts new file mode 100644 index 000000000000..d0b922b8d67e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -0,0 +1,1177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Radxa Limited + * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include "dt-bindings/usb/pd.h" +#include "rk3588.dtsi" + +/ { + model = "Radxa ROCK 5 ITX"; + compatible = "radxa,rock-5-itx", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <1750>; + }; + }; + + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + power-led1 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + hdd-led2 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 64 128 192 255>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm14 0 10000 0>; + }; + + /* M.2 E-KEY */ + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + }; + + typec_vin: regulator-typec-vin { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vbus5v0_typec_en>; + regulator-name = "typec_vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc33_io64: regulator-vcc33-io64 { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io64"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_ekey: regulator-vcc3v3-ekey { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ekey_en>; + regulator-name = "vcc3v3_ekey"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_mkey: regulator-vcc3v3-mkey { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_pwren_h>; + regulator-name = "vcc3v3_mkey"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m2_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +/* CAM0 connector */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; +}; + +/* M.2 E-key */ +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; +}; + +/* RTC and LCD0 connector */ +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "wifi_32kout"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; +}; + +/* Audio codec and CAM1 connector */ +&i2c7 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +/* FUSB302 and LCD1 connector */ +&i2c8 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c8m4_xfer>; + status = "okay"; + + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&typec_vin>; + + usb_con: connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + power-role = "source"; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_role_sw: endpoint { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + + port@2 { + reg = <2>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; +}; + +&i2c8m4_xfer { + rockchip,pins = + /* i2c8_scl_m4 */ + <3 RK_PC2 9 &pcfg_pull_up_drv_level_6>, + /* i2c8_sda_m4 */ + <3 RK_PC3 9 &pcfg_pull_up_drv_level_6>; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + hysteresis = <2000>; + temperature = <50000>; + type = "active"; + }; + + package_fan1: package-fan1 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + cooling-device = <&fan0 THERMAL_NO_LIMIT 1>; + trip = <&package_fan0>; + }; + map1 { + cooling-device = <&fan0 2 THERMAL_NO_LIMIT>; + trip = <&package_fan1>; + }; + }; +}; + +/* M.2 E-key */ +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1_0_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_ekey>; + status = "okay"; +}; + +/* RTL8125B_1 */ +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1_1_perstn>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_lan>; + status = "okay"; +}; + +/* RTL8125B_2 */ +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20x1_2_perstn>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_lan_phy2>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 1 2 2>; + /* separate clock lines from the clock generator to phy and devices */ + rockchip,rx-common-refclk-mode = <0 0 0 0>; + status = "okay"; +}; + +/* ASMedia ASM1164 Sata controller */ +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc33_io64>; + status = "okay"; +}; + +/* M.2 M.key */ +&pcie3x4 { + num-lanes = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_perstn_m1_l>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_mkey>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20x1_2_perstn: pcie20x1-2-perstn { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x1_1_perstn: pcie30x1-1-perstn { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + ekey_en: ekey-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + pcie30x4_pwren_h: pcie30x4-pwren-h { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + gl3523_reset: rl3523-reset { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vbus5v0_typec_en: vbus5v0-typec-en { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmirx { + hdmirx_det: hdmirx-det { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + dp { + dp1_hpd: dp1-hpd { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm14 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm14m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + mmc-hs200-1_8v; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +/* M.2 E-KEY */ +&sdio { + broken-cd; + bus-width = <4>; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom0_pins>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_ekey>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <837500>; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* Connected to M.2 E-key */ +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + /* connected to USB3 hub, which is powered by vcc5v0_usb12 */ + phy-supply = <&vcc5v0_usb12>; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB2 hub, which is powered by vcc5v0_usb20 */ + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usb_host1_xhci { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + peer-hub = <&hub_3_0>; + vdd-supply = <&vcc_3v3_s3>; + }; + + /* 3.0 hub on port 4 */ + hub_3_0: hub@2 { + compatible = "usb5e3,620"; + reg = <2>; + peer-hub = <&hub_2_0>; + pinctrl-names = "default"; + pinctrl-0 = <&gl3523_reset>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_3v3_s3>; + }; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usbdp_phy1 { + rockchip,dp-lane-mux = <2 3>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso new file mode 100644 index 000000000000..672d748fcc67 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * DT-overlay to run the PCIe3_4L Dual Mode controller in Endpoint mode + * in the SRNS (Separate Reference Clock No Spread) configuration. + * + * NOTE: If using a setup with two ROCK 5B:s, with one board running in + * RC mode and the other board running in EP mode, see also the device + * tree overlay: rk3588-rock-5b-pcie-srns.dtso. + */ + +/dts-v1/; +/plugin/; + +&pcie30phy { + rockchip,rx-common-refclk-mode = <0 0 0 0>; +}; + +&pcie3x4 { + status = "disabled"; +}; + +&pcie3x4_ep { + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-srns.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-srns.dtso new file mode 100644 index 000000000000..1a0f1af65c43 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-srns.dtso @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * DT-overlay to run the PCIe3_4L Dual Mode controller in Root Complex + * mode in the SRNS (Separate Reference Clock No Spread) configuration. + * + * This device tree overlay is only needed (on the RC side) when running + * a setup with two ROCK 5B:s, with one board running in RC mode and the + * other board running in EP mode. + */ + +/dts-v1/; +/plugin/; + +&pcie30phy { + rockchip,rx-common-refclk-mode = <0 0 0 0>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 2e7512676b7e..966bbc582d89 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -52,7 +52,7 @@ fan: pwm-fan { compatible = "pwm-fan"; - cooling-levels = <0 95 145 195 255>; + cooling-levels = <0 120 150 180 210 240 255>; fan-supply = <&vcc5v0_sys>; pwms = <&pwm1 0 50000 0>; #cooling-cells = <2>; @@ -65,6 +65,13 @@ shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; }; + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -279,6 +286,36 @@ }; }; +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&package_fan0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&package_fan1>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &pcie2x1l0 { pinctrl-names = "default"; pinctrl-0 = <&pcie2_0_rst>; @@ -412,6 +449,20 @@ status = "okay"; }; +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + &uart6 { pinctrl-names = "default"; pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; @@ -743,6 +794,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts index 9090c5c99f2a..d0021524e7f9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts @@ -648,6 +648,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 6b9206ce4a03..dbaa94ca69f4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -198,8 +198,7 @@ &mdio1 { rgmii_phy: ethernet-phy@1 { /* RTL8211F */ - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; pinctrl-names = "default"; pinctrl-0 = <&rtl8211f_rst>; @@ -601,6 +600,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi index 5984016b5f96..7462cc1e1007 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -1,413 +1,8 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + * */ -#include "rk3588s.dtsi" -#include "rk3588-pinctrl.dtsi" - -/ { - usb_host1_xhci: usb@fc400000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc400000 0x0 0x400000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, - <&cru ACLK_USB3OTG1>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG1>; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - pcie30_phy_grf: syscon@fd5b8000 { - compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; - reg = <0x0 0xfd5b8000 0x0 0x10000>; - }; - - pipe_phy1_grf: syscon@fd5c0000 { - compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; - reg = <0x0 0xfd5c0000 0x0 0x100>; - }; - - usbdpphy1_grf: syscon@fd5cc000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5cc000 0x0 0x4000>; - }; - - usb2phy1_grf: syscon@fd5d4000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d4000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy1: usb2phy@4000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x4000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy1"; - interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - i2s8_8ch: i2s@fddc8000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddc8000 0x0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 22>; - dma-names = "tx"; - power-domains = <&power RK3588_PD_VO0>; - resets = <&cru SRST_M_I2S8_8CH_TX>; - reset-names = "tx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s6_8ch: i2s@fddf4000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddf4000 0x0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 4>; - dma-names = "tx"; - power-domains = <&power RK3588_PD_VO1>; - resets = <&cru SRST_M_I2S6_8CH_TX>; - reset-names = "tx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s7_8ch: i2s@fddf8000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddf8000 0x0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 21>; - dma-names = "rx"; - power-domains = <&power RK3588_PD_VO1>; - resets = <&cru SRST_M_I2S7_8CH_RX>; - reset-names = "rx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s10_8ch: i2s@fde00000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfde00000 0x0 0x1000>; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 24>; - dma-names = "rx"; - power-domains = <&power RK3588_PD_VO1>; - resets = <&cru SRST_M_I2S10_8CH_RX>; - reset-names = "rx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - pcie3x4: pcie@fe150000 { - compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0x0f>; - clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, - <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, - <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", - "aux", "pipe"; - device_type = "pci"; - interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie3x4_intc 0>, - <0 0 0 2 &pcie3x4_intc 1>, - <0 0 0 3 &pcie3x4_intc 2>, - <0 0 0 4 &pcie3x4_intc 3>; - linux,pci-domain = <0>; - max-link-speed = <3>; - msi-map = <0x0000 &its1 0x0000 0x1000>; - num-lanes = <4>; - phys = <&pcie30phy>; - phy-names = "pcie-phy"; - power-domains = <&power RK3588_PD_PCIE>; - ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, - <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>, - <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>; - reg = <0xa 0x40000000 0x0 0x00400000>, - <0x0 0xfe150000 0x0 0x00010000>, - <0x0 0xf0000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; - reset-names = "pwr", "pipe"; - status = "disabled"; - - pcie3x4_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>; - }; - }; - - pcie3x2: pcie@fe160000 { - compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x10 0x1f>; - clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>, - <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>, - <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", - "aux", "pipe"; - device_type = "pci"; - interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, - <0 0 0 2 &pcie3x2_intc 1>, - <0 0 0 3 &pcie3x2_intc 2>, - <0 0 0 4 &pcie3x2_intc 3>; - linux,pci-domain = <1>; - max-link-speed = <3>; - msi-map = <0x1000 &its1 0x1000 0x1000>; - num-lanes = <2>; - phys = <&pcie30phy>; - phy-names = "pcie-phy"; - power-domains = <&power RK3588_PD_PCIE>; - ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>, - <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>, - <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>; - reg = <0xa 0x40400000 0x0 0x00400000>, - <0x0 0xfe160000 0x0 0x00010000>, - <0x0 0xf1000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>; - reset-names = "pwr", "pipe"; - status = "disabled"; - - pcie3x2_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>; - }; - }; - - pcie2x1l0: pcie@fe170000 { - compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; - bus-range = <0x20 0x2f>; - clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>, - <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>, - <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", - "aux", "pipe"; - device_type = "pci"; - interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>, - <0 0 0 2 &pcie2x1l0_intc 1>, - <0 0 0 3 &pcie2x1l0_intc 2>, - <0 0 0 4 &pcie2x1l0_intc 3>; - linux,pci-domain = <2>; - max-link-speed = <2>; - msi-map = <0x2000 &its0 0x2000 0x1000>; - num-lanes = <1>; - phys = <&combphy1_ps PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - power-domains = <&power RK3588_PD_PCIE>; - ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, - <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>, - <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>; - reg = <0xa 0x40800000 0x0 0x00400000>, - <0x0 0xfe170000 0x0 0x00010000>, - <0x0 0xf2000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>; - reset-names = "pwr", "pipe"; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie2x1l0_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>; - }; - }; - - gmac0: ethernet@fe1b0000 { - compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; - reg = <0x0 0xfe1b0000 0x0 0x10000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, - <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>, - <&cru CLK_GMAC0_PTP_REF>; - clock-names = "stmmaceth", "clk_mac_ref", - "pclk_mac", "aclk_mac", - "ptp_ref"; - power-domains = <&power RK3588_PD_GMAC>; - resets = <&cru SRST_A_GMAC0>; - reset-names = "stmmaceth"; - rockchip,grf = <&sys_grf>; - rockchip,php-grf = <&php_grf>; - snps,axi-config = <&gmac0_stmmac_axi_setup>; - snps,mixed-burst; - snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; - snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; - snps,tso; - status = "disabled"; - - mdio0: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - - gmac0_stmmac_axi_setup: stmmac-axi-config { - snps,blen = <0 0 0 0 16 8 4>; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <8>; - }; - - gmac0_mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <2>; - queue0 {}; - queue1 {}; - }; - - gmac0_mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - queue0 {}; - queue1 {}; - }; - }; - - sata1: sata@fe220000 { - compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfe220000 0 0x1000>; - interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, - <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, - <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; - clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; - ports-implemented = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - hba-port-cap = <HBA_PORT_FBSCP>; - phys = <&combphy1_ps PHY_TYPE_SATA>; - phy-names = "sata-phy"; - snps,rx-ts-max = <32>; - snps,tx-ts-max = <32>; - }; - }; - - usbdp_phy1: phy@fed90000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed90000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY1_IMMORTAL>, - <&cru PCLK_USBDPPHY1>, - <&u2phy1>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, - <&cru SRST_USBDP_COMBO_PHY1_CMN>, - <&cru SRST_USBDP_COMBO_PHY1_LANE>, - <&cru SRST_USBDP_COMBO_PHY1_PCS>, - <&cru SRST_P_USBDPPHY1>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy1_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy1_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; - - combphy1_ps: phy@fee10000 { - compatible = "rockchip,rk3588-naneng-combphy"; - reg = <0x0 0xfee10000 0x0 0x100>; - clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, - <&cru PCLK_PHP_ROOT>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; - reset-names = "phy", "apb"; - rockchip,pipe-grf = <&php_grf>; - rockchip,pipe-phy-grf = <&pipe_phy1_grf>; - status = "disabled"; - }; - - pcie30phy: phy@fee80000 { - compatible = "rockchip,rk3588-pcie3-phy"; - reg = <0x0 0xfee80000 0x0 0x20000>; - #phy-cells = <0>; - clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>; - clock-names = "pclk"; - resets = <&cru SRST_PCIE30_PHY>; - reset-names = "phy"; - rockchip,pipe-grf = <&php_grf>; - rockchip,phy-grf = <&pcie30_phy_grf>; - status = "disabled"; - }; -}; +#include "rk3588-extra.dtsi" +#include "rk3588-opp.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi index 38b9dbf38a21..bce72bac4503 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi @@ -4,4 +4,145 @@ * */ -#include "rk3588.dtsi" +#include "rk3588-extra.dtsi" + +/ { + cluster0_opp_table: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <750000 750000 950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <887500 887500 950000>; + clock-latency-ns = <40000>; + }; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <937500 937500 950000>; + clock-latency-ns = <40000>; + }; + }; + + cluster1_opp_table: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <750000 750000 950000>; + clock-latency-ns = <40000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <787500 787500 950000>; + clock-latency-ns = <40000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <875000 875000 950000>; + clock-latency-ns = <40000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <950000 950000 950000>; + clock-latency-ns = <40000>; + }; + }; + + cluster2_opp_table: opp-table-cluster2 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <750000 750000 950000>; + clock-latency-ns = <40000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <787500 787500 950000>; + clock-latency-ns = <40000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <875000 875000 950000>; + clock-latency-ns = <40000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <950000 950000 950000>; + clock-latency-ns = <40000>; + }; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <750000 750000 850000>; + }; + opp-850000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <787500 787500 850000>; + }; + }; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp_table>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp_table>; +}; + +&cpu_b2 { + operating-points-v2 = <&cluster2_opp_table>; +}; + +&cpu_b3 { + operating-points-v2 = <&cluster2_opp_table>; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp_table>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 3b9a349362db..03ed48246d36 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -377,6 +377,19 @@ status = "okay"; }; +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim0_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + &spi2 { status = "okay"; assigned-clocks = <&cru CLK_SPI2>; @@ -699,6 +712,10 @@ }; }; +&tsadc { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 6ac5ac8b48ab..c7fecf8fe7ec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -1,2670 +1,8 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + * */ -#include <dt-bindings/clock/rockchip,rk3588-cru.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/power/rk3588-power.h> -#include <dt-bindings/reset/rockchip,rk3588-cru.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/ata/ahci.h> - -/ { - compatible = "rockchip,rk3588"; - - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; - serial8 = &uart8; - serial9 = &uart9; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - spi4 = &spi4; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu_l0>; - }; - core1 { - cpu = <&cpu_l1>; - }; - core2 { - cpu = <&cpu_l2>; - }; - core3 { - cpu = <&cpu_l3>; - }; - }; - cluster1 { - core0 { - cpu = <&cpu_b0>; - }; - core1 { - cpu = <&cpu_b1>; - }; - }; - cluster2 { - core0 { - cpu = <&cpu_b2>; - }; - core1 { - cpu = <&cpu_b3>; - }; - }; - }; - - cpu_l0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <530>; - clocks = <&scmi_clk SCMI_CLK_CPUL>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; - assigned-clock-rates = <816000000>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <32768>; - i-cache-line-size = <64>; - i-cache-sets = <128>; - d-cache-size = <32768>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l0>; - dynamic-power-coefficient = <228>; - #cooling-cells = <2>; - }; - - cpu_l1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <530>; - clocks = <&scmi_clk SCMI_CLK_CPUL>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <32768>; - i-cache-line-size = <64>; - i-cache-sets = <128>; - d-cache-size = <32768>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l1>; - dynamic-power-coefficient = <228>; - #cooling-cells = <2>; - }; - - cpu_l2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x200>; - enable-method = "psci"; - capacity-dmips-mhz = <530>; - clocks = <&scmi_clk SCMI_CLK_CPUL>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <32768>; - i-cache-line-size = <64>; - i-cache-sets = <128>; - d-cache-size = <32768>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l2>; - dynamic-power-coefficient = <228>; - #cooling-cells = <2>; - }; - - cpu_l3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x300>; - enable-method = "psci"; - capacity-dmips-mhz = <530>; - clocks = <&scmi_clk SCMI_CLK_CPUL>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <32768>; - i-cache-line-size = <64>; - i-cache-sets = <128>; - d-cache-size = <32768>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l3>; - dynamic-power-coefficient = <228>; - #cooling-cells = <2>; - }; - - cpu_b0: cpu@400 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x400>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&scmi_clk SCMI_CLK_CPUB01>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; - assigned-clock-rates = <816000000>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <65536>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <65536>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b0>; - dynamic-power-coefficient = <416>; - #cooling-cells = <2>; - }; - - cpu_b1: cpu@500 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x500>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&scmi_clk SCMI_CLK_CPUB01>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <65536>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <65536>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b1>; - dynamic-power-coefficient = <416>; - #cooling-cells = <2>; - }; - - cpu_b2: cpu@600 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x600>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <816000000>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <65536>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <65536>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b2>; - dynamic-power-coefficient = <416>; - #cooling-cells = <2>; - }; - - cpu_b3: cpu@700 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x700>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&scmi_clk SCMI_CLK_CPUB23>; - cpu-idle-states = <&CPU_SLEEP>; - i-cache-size = <65536>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <65536>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b3>; - dynamic-power-coefficient = <416>; - #cooling-cells = <2>; - }; - - idle-states { - entry-method = "psci"; - CPU_SLEEP: cpu-sleep { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <100>; - exit-latency-us = <120>; - min-residency-us = <1000>; - }; - }; - - l2_cache_l0: l2-cache-l0 { - compatible = "cache"; - cache-size = <131072>; - cache-line-size = <64>; - cache-sets = <512>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_l1: l2-cache-l1 { - compatible = "cache"; - cache-size = <131072>; - cache-line-size = <64>; - cache-sets = <512>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_l2: l2-cache-l2 { - compatible = "cache"; - cache-size = <131072>; - cache-line-size = <64>; - cache-sets = <512>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_l3: l2-cache-l3 { - compatible = "cache"; - cache-size = <131072>; - cache-line-size = <64>; - cache-sets = <512>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_b0: l2-cache-b0 { - compatible = "cache"; - cache-size = <524288>; - cache-line-size = <64>; - cache-sets = <1024>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_b1: l2-cache-b1 { - compatible = "cache"; - cache-size = <524288>; - cache-line-size = <64>; - cache-sets = <1024>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_b2: l2-cache-b2 { - compatible = "cache"; - cache-size = <524288>; - cache-line-size = <64>; - cache-sets = <1024>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l2_cache_b3: l2-cache-b3 { - compatible = "cache"; - cache-size = <524288>; - cache-line-size = <64>; - cache-sets = <1024>; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_cache>; - }; - - l3_cache: l3-cache { - compatible = "cache"; - cache-size = <3145728>; - cache-line-size = <64>; - cache-sets = <4096>; - cache-level = <3>; - cache-unified; - }; - }; - - display_subsystem: display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vop_out>; - }; - - firmware { - optee: optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - - scmi: scmi { - compatible = "arm,scmi-smc"; - arm,smc-id = <0x82000010>; - shmem = <&scmi_shmem>; - #address-cells = <1>; - #size-cells = <0>; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; - - scmi_reset: protocol@16 { - reg = <0x16>; - #reset-cells = <1>; - }; - }; - }; - - pmu-a55 { - compatible = "arm,cortex-a55-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>; - }; - - pmu-a76 { - compatible = "arm,cortex-a76-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - spll: clock-0 { - compatible = "fixed-clock"; - clock-frequency = <702000000>; - clock-output-names = "spll"; - #clock-cells = <0>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; - }; - - xin24m: clock-1 { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - xin32k: clock-2 { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - #clock-cells = <0>; - }; - - pmu_sram: sram@10f000 { - compatible = "mmio-sram"; - reg = <0x0 0x0010f000 0x0 0x100>; - ranges = <0 0x0 0x0010f000 0x100>; - #address-cells = <1>; - #size-cells = <1>; - - scmi_shmem: sram@0 { - compatible = "arm,scmi-shmem"; - reg = <0x0 0x100>; - }; - }; - - gpu: gpu@fb000000 { - compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; - reg = <0x0 0xfb000000 0x0 0x200000>; - #cooling-cells = <2>; - assigned-clocks = <&scmi_clk SCMI_CLK_GPU>; - assigned-clock-rates = <200000000>; - clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, - <&cru CLK_GPU_STACKS>; - clock-names = "core", "coregroup", "stacks"; - dynamic-power-coefficient = <2982>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "job", "mmu", "gpu"; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3588_PD_GPU>; - status = "disabled"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <675000 675000 850000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <700000 700000 850000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <750000 750000 850000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <800000 800000 850000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <850000 850000 850000>; - }; - }; - }; - - usb_host0_xhci: usb@fc000000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfc000000 0x0 0x400000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, - <&cru ACLK_USB3OTG0>; - clock-names = "ref_clk", "suspend_clk", "bus_clk"; - dr_mode = "otg"; - phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - power-domains = <&power RK3588_PD_USB>; - resets = <&cru SRST_A_USB3OTG0>; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - status = "disabled"; - }; - - usb_host0_ehci: usb@fc800000 { - compatible = "rockchip,rk3588-ehci", "generic-ehci"; - reg = <0x0 0xfc800000 0x0 0x40000>; - interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; - phys = <&u2phy2_host>; - phy-names = "usb"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host0_ohci: usb@fc840000 { - compatible = "rockchip,rk3588-ohci", "generic-ohci"; - reg = <0x0 0xfc840000 0x0 0x40000>; - interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; - phys = <&u2phy2_host>; - phy-names = "usb"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ehci: usb@fc880000 { - compatible = "rockchip,rk3588-ehci", "generic-ehci"; - reg = <0x0 0xfc880000 0x0 0x40000>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; - phys = <&u2phy3_host>; - phy-names = "usb"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ohci: usb@fc8c0000 { - compatible = "rockchip,rk3588-ohci", "generic-ohci"; - reg = <0x0 0xfc8c0000 0x0 0x40000>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; - phys = <&u2phy3_host>; - phy-names = "usb"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host2_xhci: usb@fcd00000 { - compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; - reg = <0x0 0xfcd00000 0x0 0x400000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>, - <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>, - <&cru CLK_PIPEPHY2_PIPE_U3_G>; - clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe"; - dr_mode = "host"; - phys = <&combphy2_psu PHY_TYPE_USB3>; - phy-names = "usb3-phy"; - phy_type = "utmi_wide"; - resets = <&cru SRST_A_USB3OTG2>; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - snps,dis_rxdet_inp3_quirk; - status = "disabled"; - }; - - mmu600_pcie: iommu@fc900000 { - compatible = "arm,smmu-v3"; - reg = <0x0 0xfc900000 0x0 0x200000>; - interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; - #iommu-cells = <1>; - status = "disabled"; - }; - - mmu600_php: iommu@fcb00000 { - compatible = "arm,smmu-v3"; - reg = <0x0 0xfcb00000 0x0 0x200000>; - interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "eventq", "gerror", "priq", "cmdq-sync"; - #iommu-cells = <1>; - status = "disabled"; - }; - - pmu1grf: syscon@fd58a000 { - compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xfd58a000 0x0 0x10000>; - }; - - sys_grf: syscon@fd58c000 { - compatible = "rockchip,rk3588-sys-grf", "syscon"; - reg = <0x0 0xfd58c000 0x0 0x1000>; - }; - - vop_grf: syscon@fd5a4000 { - compatible = "rockchip,rk3588-vop-grf", "syscon"; - reg = <0x0 0xfd5a4000 0x0 0x2000>; - }; - - vo0_grf: syscon@fd5a6000 { - compatible = "rockchip,rk3588-vo-grf", "syscon"; - reg = <0x0 0xfd5a6000 0x0 0x2000>; - clocks = <&cru PCLK_VO0GRF>; - }; - - vo1_grf: syscon@fd5a8000 { - compatible = "rockchip,rk3588-vo-grf", "syscon"; - reg = <0x0 0xfd5a8000 0x0 0x100>; - clocks = <&cru PCLK_VO1GRF>; - }; - - usb_grf: syscon@fd5ac000 { - compatible = "rockchip,rk3588-usb-grf", "syscon"; - reg = <0x0 0xfd5ac000 0x0 0x4000>; - }; - - php_grf: syscon@fd5b0000 { - compatible = "rockchip,rk3588-php-grf", "syscon"; - reg = <0x0 0xfd5b0000 0x0 0x1000>; - }; - - pipe_phy0_grf: syscon@fd5bc000 { - compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; - reg = <0x0 0xfd5bc000 0x0 0x100>; - }; - - pipe_phy2_grf: syscon@fd5c4000 { - compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; - reg = <0x0 0xfd5c4000 0x0 0x100>; - }; - - usbdpphy0_grf: syscon@fd5c8000 { - compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; - reg = <0x0 0xfd5c8000 0x0 0x4000>; - }; - - usb2phy0_grf: syscon@fd5d0000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d0000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy0: usb2phy@0 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x0 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy0"; - interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy0_otg: otg-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usb2phy2_grf: syscon@fd5d8000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5d8000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy2: usb2phy@8000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x8000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy2"; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy2_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usb2phy3_grf: syscon@fd5dc000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfd5dc000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy3: usb2phy@c000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0xc000 0x10>; - #clock-cells = <0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - clock-output-names = "usb480m_phy3"; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; - reset-names = "phy", "apb"; - status = "disabled"; - - u2phy3_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - hdptxphy0_grf: syscon@fd5e0000 { - compatible = "rockchip,rk3588-hdptxphy-grf", "syscon"; - reg = <0x0 0xfd5e0000 0x0 0x100>; - }; - - ioc: syscon@fd5f0000 { - compatible = "rockchip,rk3588-ioc", "syscon"; - reg = <0x0 0xfd5f0000 0x0 0x10000>; - }; - - system_sram1: sram@fd600000 { - compatible = "mmio-sram"; - reg = <0x0 0xfd600000 0x0 0x100000>; - ranges = <0x0 0x0 0xfd600000 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - }; - - cru: clock-controller@fd7c0000 { - compatible = "rockchip,rk3588-cru"; - reg = <0x0 0xfd7c0000 0x0 0x5c000>; - assigned-clocks = - <&cru PLL_PPLL>, <&cru PLL_AUPLL>, - <&cru PLL_NPLL>, <&cru PLL_GPLL>, - <&cru ACLK_CENTER_ROOT>, - <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>, - <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>, - <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>, - <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>, - <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, - <&cru CLK_GPU>; - assigned-clock-rates = - <1100000000>, <786432000>, - <850000000>, <1188000000>, - <702000000>, - <400000000>, <500000000>, - <800000000>, <100000000>, - <400000000>, <100000000>, - <200000000>, <500000000>, - <375000000>, <150000000>, - <200000000>; - rockchip,grf = <&php_grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - i2c0: i2c@fd880000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfd880000 0x0 0x1000>; - interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c0m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@fd890000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfd890000 0x0 0x100>; - interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 6>, <&dmac0 7>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart0m1_xfer>; - pinctrl-names = "default"; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - pwm0: pwm@fd8b0000 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfd8b0000 0x0 0x10>; - clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm0m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm1: pwm@fd8b0010 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfd8b0010 0x0 0x10>; - clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm1m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm2: pwm@fd8b0020 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfd8b0020 0x0 0x10>; - clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm2m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm3: pwm@fd8b0030 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfd8b0030 0x0 0x10>; - clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm3m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pmu: power-management@fd8d8000 { - compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd"; - reg = <0x0 0xfd8d8000 0x0 0x400>; - - power: power-controller { - compatible = "rockchip,rk3588-power-controller"; - #address-cells = <1>; - #power-domain-cells = <1>; - #size-cells = <0>; - status = "okay"; - - /* These power domains are grouped by VD_NPU */ - power-domain@RK3588_PD_NPU { - reg = <RK3588_PD_NPU>; - #power-domain-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3588_PD_NPUTOP { - reg = <RK3588_PD_NPUTOP>; - clocks = <&cru HCLK_NPU_ROOT>, - <&cru PCLK_NPU_ROOT>, - <&cru CLK_NPU_DSU0>, - <&cru HCLK_NPU_CM0_ROOT>; - pm_qos = <&qos_npu0_mwr>, - <&qos_npu0_mro>, - <&qos_mcu_npu>; - #power-domain-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3588_PD_NPU1 { - reg = <RK3588_PD_NPU1>; - clocks = <&cru HCLK_NPU_ROOT>, - <&cru PCLK_NPU_ROOT>, - <&cru CLK_NPU_DSU0>; - pm_qos = <&qos_npu1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_NPU2 { - reg = <RK3588_PD_NPU2>; - clocks = <&cru HCLK_NPU_ROOT>, - <&cru PCLK_NPU_ROOT>, - <&cru CLK_NPU_DSU0>; - pm_qos = <&qos_npu2>; - #power-domain-cells = <0>; - }; - }; - }; - /* These power domains are grouped by VD_GPU */ - power-domain@RK3588_PD_GPU { - reg = <RK3588_PD_GPU>; - clocks = <&cru CLK_GPU>, - <&cru CLK_GPU_COREGROUP>, - <&cru CLK_GPU_STACKS>; - pm_qos = <&qos_gpu_m0>, - <&qos_gpu_m1>, - <&qos_gpu_m2>, - <&qos_gpu_m3>; - #power-domain-cells = <0>; - }; - /* These power domains are grouped by VD_VCODEC */ - power-domain@RK3588_PD_VCODEC { - reg = <RK3588_PD_VCODEC>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - power-domain@RK3588_PD_RKVDEC0 { - reg = <RK3588_PD_RKVDEC0>; - clocks = <&cru HCLK_RKVDEC0>, - <&cru HCLK_VDPU_ROOT>, - <&cru ACLK_VDPU_ROOT>, - <&cru ACLK_RKVDEC0>, - <&cru ACLK_RKVDEC_CCU>; - pm_qos = <&qos_rkvdec0>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_RKVDEC1 { - reg = <RK3588_PD_RKVDEC1>; - clocks = <&cru HCLK_RKVDEC1>, - <&cru HCLK_VDPU_ROOT>, - <&cru ACLK_VDPU_ROOT>, - <&cru ACLK_RKVDEC1>; - pm_qos = <&qos_rkvdec1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_VENC0 { - reg = <RK3588_PD_VENC0>; - clocks = <&cru HCLK_RKVENC0>, - <&cru ACLK_RKVENC0>; - pm_qos = <&qos_rkvenc0_m0ro>, - <&qos_rkvenc0_m1ro>, - <&qos_rkvenc0_m2wo>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - power-domain@RK3588_PD_VENC1 { - reg = <RK3588_PD_VENC1>; - clocks = <&cru HCLK_RKVENC1>, - <&cru HCLK_RKVENC0>, - <&cru ACLK_RKVENC0>, - <&cru ACLK_RKVENC1>; - pm_qos = <&qos_rkvenc1_m0ro>, - <&qos_rkvenc1_m1ro>, - <&qos_rkvenc1_m2wo>; - #power-domain-cells = <0>; - }; - }; - }; - /* These power domains are grouped by VD_LOGIC */ - power-domain@RK3588_PD_VDPU { - reg = <RK3588_PD_VDPU>; - clocks = <&cru HCLK_VDPU_ROOT>, - <&cru ACLK_VDPU_LOW_ROOT>, - <&cru ACLK_VDPU_ROOT>, - <&cru ACLK_JPEG_DECODER_ROOT>, - <&cru ACLK_IEP2P0>, - <&cru HCLK_IEP2P0>, - <&cru ACLK_JPEG_ENCODER0>, - <&cru HCLK_JPEG_ENCODER0>, - <&cru ACLK_JPEG_ENCODER1>, - <&cru HCLK_JPEG_ENCODER1>, - <&cru ACLK_JPEG_ENCODER2>, - <&cru HCLK_JPEG_ENCODER2>, - <&cru ACLK_JPEG_ENCODER3>, - <&cru HCLK_JPEG_ENCODER3>, - <&cru ACLK_JPEG_DECODER>, - <&cru HCLK_JPEG_DECODER>, - <&cru ACLK_RGA2>, - <&cru HCLK_RGA2>; - pm_qos = <&qos_iep>, - <&qos_jpeg_dec>, - <&qos_jpeg_enc0>, - <&qos_jpeg_enc1>, - <&qos_jpeg_enc2>, - <&qos_jpeg_enc3>, - <&qos_rga2_mro>, - <&qos_rga2_mwo>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - - power-domain@RK3588_PD_AV1 { - reg = <RK3588_PD_AV1>; - clocks = <&cru PCLK_AV1>, - <&cru ACLK_AV1>, - <&cru HCLK_VDPU_ROOT>; - pm_qos = <&qos_av1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_RKVDEC0 { - reg = <RK3588_PD_RKVDEC0>; - clocks = <&cru HCLK_RKVDEC0>, - <&cru HCLK_VDPU_ROOT>, - <&cru ACLK_VDPU_ROOT>, - <&cru ACLK_RKVDEC0>; - pm_qos = <&qos_rkvdec0>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_RKVDEC1 { - reg = <RK3588_PD_RKVDEC1>; - clocks = <&cru HCLK_RKVDEC1>, - <&cru HCLK_VDPU_ROOT>, - <&cru ACLK_VDPU_ROOT>; - pm_qos = <&qos_rkvdec1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_RGA30 { - reg = <RK3588_PD_RGA30>; - clocks = <&cru ACLK_RGA3_0>, - <&cru HCLK_RGA3_0>; - pm_qos = <&qos_rga3_0>; - #power-domain-cells = <0>; - }; - }; - power-domain@RK3588_PD_VOP { - reg = <RK3588_PD_VOP>; - clocks = <&cru PCLK_VOP_ROOT>, - <&cru HCLK_VOP_ROOT>, - <&cru ACLK_VOP>; - pm_qos = <&qos_vop_m0>, - <&qos_vop_m1>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - power-domain@RK3588_PD_VO0 { - reg = <RK3588_PD_VO0>; - clocks = <&cru PCLK_VO0_ROOT>, - <&cru PCLK_VO0_S_ROOT>, - <&cru HCLK_VO0_S_ROOT>, - <&cru ACLK_VO0_ROOT>, - <&cru HCLK_HDCP0>, - <&cru ACLK_HDCP0>, - <&cru HCLK_VOP_ROOT>; - pm_qos = <&qos_hdcp0>; - #power-domain-cells = <0>; - }; - }; - power-domain@RK3588_PD_VO1 { - reg = <RK3588_PD_VO1>; - clocks = <&cru PCLK_VO1_ROOT>, - <&cru PCLK_VO1_S_ROOT>, - <&cru HCLK_VO1_S_ROOT>, - <&cru HCLK_HDCP1>, - <&cru ACLK_HDCP1>, - <&cru ACLK_HDMIRX_ROOT>, - <&cru HCLK_VO1USB_TOP_ROOT>; - pm_qos = <&qos_hdcp1>, - <&qos_hdmirx>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_VI { - reg = <RK3588_PD_VI>; - clocks = <&cru HCLK_VI_ROOT>, - <&cru PCLK_VI_ROOT>, - <&cru HCLK_ISP0>, - <&cru ACLK_ISP0>, - <&cru HCLK_VICAP>, - <&cru ACLK_VICAP>; - pm_qos = <&qos_isp0_mro>, - <&qos_isp0_mwo>, - <&qos_vicap_m0>, - <&qos_vicap_m1>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - power-domain@RK3588_PD_ISP1 { - reg = <RK3588_PD_ISP1>; - clocks = <&cru HCLK_ISP1>, - <&cru ACLK_ISP1>, - <&cru HCLK_VI_ROOT>, - <&cru PCLK_VI_ROOT>; - pm_qos = <&qos_isp1_mwo>, - <&qos_isp1_mro>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_FEC { - reg = <RK3588_PD_FEC>; - clocks = <&cru HCLK_FISHEYE0>, - <&cru ACLK_FISHEYE0>, - <&cru HCLK_FISHEYE1>, - <&cru ACLK_FISHEYE1>, - <&cru PCLK_VI_ROOT>; - pm_qos = <&qos_fisheye0>, - <&qos_fisheye1>; - #power-domain-cells = <0>; - }; - }; - power-domain@RK3588_PD_RGA31 { - reg = <RK3588_PD_RGA31>; - clocks = <&cru HCLK_RGA3_1>, - <&cru ACLK_RGA3_1>; - pm_qos = <&qos_rga3_1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_USB { - reg = <RK3588_PD_USB>; - clocks = <&cru PCLK_PHP_ROOT>, - <&cru ACLK_USB_ROOT>, - <&cru ACLK_USB>, - <&cru HCLK_USB_ROOT>, - <&cru HCLK_HOST0>, - <&cru HCLK_HOST_ARB0>, - <&cru HCLK_HOST1>, - <&cru HCLK_HOST_ARB1>; - pm_qos = <&qos_usb3_0>, - <&qos_usb3_1>, - <&qos_usb2host_0>, - <&qos_usb2host_1>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_GMAC { - reg = <RK3588_PD_GMAC>; - clocks = <&cru PCLK_PHP_ROOT>, - <&cru ACLK_PCIE_ROOT>, - <&cru ACLK_PHP_ROOT>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_PCIE { - reg = <RK3588_PD_PCIE>; - clocks = <&cru PCLK_PHP_ROOT>, - <&cru ACLK_PCIE_ROOT>, - <&cru ACLK_PHP_ROOT>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_SDIO { - reg = <RK3588_PD_SDIO>; - clocks = <&cru HCLK_SDIO>, - <&cru HCLK_NVM_ROOT>; - pm_qos = <&qos_sdio>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_AUDIO { - reg = <RK3588_PD_AUDIO>; - clocks = <&cru HCLK_AUDIO_ROOT>, - <&cru PCLK_AUDIO_ROOT>; - #power-domain-cells = <0>; - }; - power-domain@RK3588_PD_SDMMC { - reg = <RK3588_PD_SDMMC>; - pm_qos = <&qos_sdmmc>; - #power-domain-cells = <0>; - }; - }; - }; - - av1d: video-codec@fdc70000 { - compatible = "rockchip,rk3588-av1-vpu"; - reg = <0x0 0xfdc70000 0x0 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vdpu"; - assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - assigned-clock-rates = <400000000>, <400000000>; - clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3588_PD_AV1>; - resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; - }; - - vop: vop@fdd90000 { - compatible = "rockchip,rk3588-vop"; - reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; - reg-names = "vop", "gamma-lut"; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, - <&cru HCLK_VOP>, - <&cru DCLK_VOP0>, - <&cru DCLK_VOP1>, - <&cru DCLK_VOP2>, - <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; - clock-names = "aclk", - "hclk", - "dclk_vp0", - "dclk_vp1", - "dclk_vp2", - "dclk_vp3", - "pclk_vop"; - iommus = <&vop_mmu>; - power-domains = <&power RK3588_PD_VOP>; - rockchip,grf = <&sys_grf>; - rockchip,vop-grf = <&vop_grf>; - rockchip,vo1-grf = <&vo1_grf>; - rockchip,pmu = <&pmu>; - status = "disabled"; - - vop_out: ports { - #address-cells = <1>; - #size-cells = <0>; - - vp0: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - vp1: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - vp2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - vp3: port@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - }; - - vop_mmu: iommu@fdd97e00 { - compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; - reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3588_PD_VOP>; - status = "disabled"; - }; - - i2s4_8ch: i2s@fddc0000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddc0000 0x0 0x1000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 0>; - dma-names = "tx"; - power-domains = <&power RK3588_PD_VO0>; - resets = <&cru SRST_M_I2S4_8CH_TX>; - reset-names = "tx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s5_8ch: i2s@fddf0000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddf0000 0x0 0x1000>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 2>; - dma-names = "tx"; - power-domains = <&power RK3588_PD_VO1>; - resets = <&cru SRST_M_I2S5_8CH_TX>; - reset-names = "tx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s9_8ch: i2s@fddfc000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfddfc000 0x0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac2 23>; - dma-names = "rx"; - power-domains = <&power RK3588_PD_VO1>; - resets = <&cru SRST_M_I2S9_8CH_RX>; - reset-names = "rx-m"; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - qos_gpu_m0: qos@fdf35000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf35000 0x0 0x20>; - }; - - qos_gpu_m1: qos@fdf35200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf35200 0x0 0x20>; - }; - - qos_gpu_m2: qos@fdf35400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf35400 0x0 0x20>; - }; - - qos_gpu_m3: qos@fdf35600 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf35600 0x0 0x20>; - }; - - qos_rga3_1: qos@fdf36000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf36000 0x0 0x20>; - }; - - qos_sdio: qos@fdf39000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf39000 0x0 0x20>; - }; - - qos_sdmmc: qos@fdf3d800 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf3d800 0x0 0x20>; - }; - - qos_usb3_1: qos@fdf3e000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf3e000 0x0 0x20>; - }; - - qos_usb3_0: qos@fdf3e200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf3e200 0x0 0x20>; - }; - - qos_usb2host_0: qos@fdf3e400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf3e400 0x0 0x20>; - }; - - qos_usb2host_1: qos@fdf3e600 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf3e600 0x0 0x20>; - }; - - qos_fisheye0: qos@fdf40000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40000 0x0 0x20>; - }; - - qos_fisheye1: qos@fdf40200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40200 0x0 0x20>; - }; - - qos_isp0_mro: qos@fdf40400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40400 0x0 0x20>; - }; - - qos_isp0_mwo: qos@fdf40500 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40500 0x0 0x20>; - }; - - qos_vicap_m0: qos@fdf40600 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40600 0x0 0x20>; - }; - - qos_vicap_m1: qos@fdf40800 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf40800 0x0 0x20>; - }; - - qos_isp1_mwo: qos@fdf41000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf41000 0x0 0x20>; - }; - - qos_isp1_mro: qos@fdf41100 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf41100 0x0 0x20>; - }; - - qos_rkvenc0_m0ro: qos@fdf60000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf60000 0x0 0x20>; - }; - - qos_rkvenc0_m1ro: qos@fdf60200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf60200 0x0 0x20>; - }; - - qos_rkvenc0_m2wo: qos@fdf60400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf60400 0x0 0x20>; - }; - - qos_rkvenc1_m0ro: qos@fdf61000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf61000 0x0 0x20>; - }; - - qos_rkvenc1_m1ro: qos@fdf61200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf61200 0x0 0x20>; - }; - - qos_rkvenc1_m2wo: qos@fdf61400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf61400 0x0 0x20>; - }; - - qos_rkvdec0: qos@fdf62000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf62000 0x0 0x20>; - }; - - qos_rkvdec1: qos@fdf63000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf63000 0x0 0x20>; - }; - - qos_av1: qos@fdf64000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf64000 0x0 0x20>; - }; - - qos_iep: qos@fdf66000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66000 0x0 0x20>; - }; - - qos_jpeg_dec: qos@fdf66200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66200 0x0 0x20>; - }; - - qos_jpeg_enc0: qos@fdf66400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66400 0x0 0x20>; - }; - - qos_jpeg_enc1: qos@fdf66600 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66600 0x0 0x20>; - }; - - qos_jpeg_enc2: qos@fdf66800 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66800 0x0 0x20>; - }; - - qos_jpeg_enc3: qos@fdf66a00 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66a00 0x0 0x20>; - }; - - qos_rga2_mro: qos@fdf66c00 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66c00 0x0 0x20>; - }; - - qos_rga2_mwo: qos@fdf66e00 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf66e00 0x0 0x20>; - }; - - qos_rga3_0: qos@fdf67000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf67000 0x0 0x20>; - }; - - qos_vdpu: qos@fdf67200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf67200 0x0 0x20>; - }; - - qos_npu1: qos@fdf70000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf70000 0x0 0x20>; - }; - - qos_npu2: qos@fdf71000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf71000 0x0 0x20>; - }; - - qos_npu0_mwr: qos@fdf72000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf72000 0x0 0x20>; - }; - - qos_npu0_mro: qos@fdf72200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf72200 0x0 0x20>; - }; - - qos_mcu_npu: qos@fdf72400 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf72400 0x0 0x20>; - }; - - qos_hdcp0: qos@fdf80000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf80000 0x0 0x20>; - }; - - qos_hdcp1: qos@fdf81000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf81000 0x0 0x20>; - }; - - qos_hdmirx: qos@fdf81200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf81200 0x0 0x20>; - }; - - qos_vop_m0: qos@fdf82000 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf82000 0x0 0x20>; - }; - - qos_vop_m1: qos@fdf82200 { - compatible = "rockchip,rk3588-qos", "syscon"; - reg = <0x0 0xfdf82200 0x0 0x20>; - }; - - dfi: dfi@fe060000 { - reg = <0x00 0xfe060000 0x00 0x10000>; - compatible = "rockchip,rk3588-dfi"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; - rockchip,pmu = <&pmu1grf>; - }; - - pcie2x1l1: pcie@fe180000 { - compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; - bus-range = <0x30 0x3f>; - clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>, - <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>, - <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", - "aux", "pipe"; - device_type = "pci"; - interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>, - <0 0 0 2 &pcie2x1l1_intc 1>, - <0 0 0 3 &pcie2x1l1_intc 2>, - <0 0 0 4 &pcie2x1l1_intc 3>; - linux,pci-domain = <3>; - max-link-speed = <2>; - msi-map = <0x3000 &its0 0x3000 0x1000>; - num-lanes = <1>; - phys = <&combphy2_psu PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - power-domains = <&power RK3588_PD_PCIE>; - ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>, - <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>, - <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>; - reg = <0xa 0x40c00000 0x0 0x00400000>, - <0x0 0xfe180000 0x0 0x00010000>, - <0x0 0xf3000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>; - reset-names = "pwr", "pipe"; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie2x1l1_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>; - }; - }; - - pcie2x1l2: pcie@fe190000 { - compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; - bus-range = <0x40 0x4f>; - clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>, - <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>, - <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>; - clock-names = "aclk_mst", "aclk_slv", - "aclk_dbi", "pclk", - "aux", "pipe"; - device_type = "pci"; - interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "pmc", "msg", "legacy", "err"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>, - <0 0 0 2 &pcie2x1l2_intc 1>, - <0 0 0 3 &pcie2x1l2_intc 2>, - <0 0 0 4 &pcie2x1l2_intc 3>; - linux,pci-domain = <4>; - max-link-speed = <2>; - msi-map = <0x4000 &its0 0x4000 0x1000>; - num-lanes = <1>; - phys = <&combphy0_ps PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - power-domains = <&power RK3588_PD_PCIE>; - ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, - <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>, - <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>; - reg = <0xa 0x41000000 0x0 0x00400000>, - <0x0 0xfe190000 0x0 0x00010000>, - <0x0 0xf4000000 0x0 0x00100000>; - reg-names = "dbi", "apb", "config"; - resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>; - reset-names = "pwr", "pipe"; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie2x1l2_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>; - }; - }; - - gmac1: ethernet@fe1c0000 { - compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; - reg = <0x0 0xfe1c0000 0x0 0x10000>; - interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, - <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>, - <&cru CLK_GMAC1_PTP_REF>; - clock-names = "stmmaceth", "clk_mac_ref", - "pclk_mac", "aclk_mac", - "ptp_ref"; - power-domains = <&power RK3588_PD_GMAC>; - resets = <&cru SRST_A_GMAC1>; - reset-names = "stmmaceth"; - rockchip,grf = <&sys_grf>; - rockchip,php-grf = <&php_grf>; - snps,axi-config = <&gmac1_stmmac_axi_setup>; - snps,mixed-burst; - snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; - snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; - snps,tso; - status = "disabled"; - - mdio1: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - - gmac1_stmmac_axi_setup: stmmac-axi-config { - snps,blen = <0 0 0 0 16 8 4>; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <8>; - }; - - gmac1_mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <2>; - queue0 {}; - queue1 {}; - }; - - gmac1_mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - queue0 {}; - queue1 {}; - }; - }; - - sata0: sata@fe210000 { - compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfe210000 0 0x1000>; - interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, - <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, - <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; - clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; - ports-implemented = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - hba-port-cap = <HBA_PORT_FBSCP>; - phys = <&combphy0_ps PHY_TYPE_SATA>; - phy-names = "sata-phy"; - snps,rx-ts-max = <32>; - snps,tx-ts-max = <32>; - }; - }; - - sata2: sata@fe230000 { - compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; - reg = <0 0xfe230000 0 0x1000>; - interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>, - <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>, - <&cru CLK_PIPEPHY2_PIPE_ASIC_G>; - clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; - ports-implemented = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - hba-port-cap = <HBA_PORT_FBSCP>; - phys = <&combphy2_psu PHY_TYPE_SATA>; - phy-names = "sata-phy"; - snps,rx-ts-max = <32>; - snps,tx-ts-max = <32>; - }; - }; - - sfc: spi@fe2b0000 { - compatible = "rockchip,sfc"; - reg = <0x0 0xfe2b0000 0x0 0x4000>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; - clock-names = "clk_sfc", "hclk_sfc"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - sdmmc: mmc@fe2c0000 { - compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2c0000 0x0 0x4000>; - interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; - power-domains = <&power RK3588_PD_SDMMC>; - status = "disabled"; - }; - - sdio: mmc@fe2d0000 { - compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x00 0xfe2d0000 0x00 0x4000>; - interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, - <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdiom1_pins>; - power-domains = <&power RK3588_PD_SDIO>; - status = "disabled"; - }; - - sdhci: mmc@fe2e0000 { - compatible = "rockchip,rk3588-dwcmshc"; - reg = <0x0 0xfe2e0000 0x0 0x10000>; - interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>; - assigned-clock-rates = <200000000>, <24000000>, <200000000>; - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, - <&cru TMCLK_EMMC>; - clock-names = "core", "bus", "axi", "block", "timer"; - max-frequency = <200000000>; - pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, - <&emmc_cmd>, <&emmc_data_strobe>; - pinctrl-names = "default"; - resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, - <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, - <&cru SRST_T_EMMC>; - reset-names = "core", "bus", "axi", "block", "timer"; - status = "disabled"; - }; - - i2s0_8ch: i2s@fe470000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfe470000 0x0 0x1000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; - dmas = <&dmac0 0>, <&dmac0 1>; - dma-names = "tx", "rx"; - power-domains = <&power RK3588_PD_AUDIO>; - resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; - reset-names = "tx-m", "rx-m"; - rockchip,trcm-sync-tx-only; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdi1 - &i2s0_sdi2 - &i2s0_sdi3 - &i2s0_sdo0 - &i2s0_sdo1 - &i2s0_sdo2 - &i2s0_sdo3>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s1_8ch: i2s@fe480000 { - compatible = "rockchip,rk3588-i2s-tdm"; - reg = <0x0 0xfe480000 0x0 0x1000>; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; - clock-names = "mclk_tx", "mclk_rx", "hclk"; - dmas = <&dmac0 2>, <&dmac0 3>; - dma-names = "tx", "rx"; - resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; - reset-names = "tx-m", "rx-m"; - rockchip,trcm-sync-tx-only; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_lrck - &i2s1m0_sclk - &i2s1m0_sdi0 - &i2s1m0_sdi1 - &i2s1m0_sdi2 - &i2s1m0_sdi3 - &i2s1m0_sdo0 - &i2s1m0_sdo1 - &i2s1m0_sdo2 - &i2s1m0_sdo3>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s2_2ch: i2s@fe490000 { - compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xfe490000 0x0 0x1000>; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; - clock-names = "i2s_clk", "i2s_hclk"; - assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac1 0>, <&dmac1 1>; - dma-names = "tx", "rx"; - power-domains = <&power RK3588_PD_AUDIO>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2m1_lrck - &i2s2m1_sclk - &i2s2m1_sdi - &i2s2m1_sdo>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s3_2ch: i2s@fe4a0000 { - compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xfe4a0000 0x0 0x1000>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; - clock-names = "i2s_clk", "i2s_hclk"; - assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; - assigned-clock-parents = <&cru PLL_AUPLL>; - dmas = <&dmac1 2>, <&dmac1 3>; - dma-names = "tx", "rx"; - power-domains = <&power RK3588_PD_AUDIO>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s3_lrck - &i2s3_sclk - &i2s3_sdi - &i2s3_sdo>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - gic: interrupt-controller@fe600000 { - compatible = "arm,gic-v3"; - reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ - <0x0 0xfe680000 0 0x100000>; /* GICR */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-controller; - mbi-alias = <0x0 0xfe610000>; - mbi-ranges = <424 56>; - msi-controller; - ranges; - #address-cells = <2>; - #interrupt-cells = <4>; - #size-cells = <2>; - - its0: msi-controller@fe640000 { - compatible = "arm,gic-v3-its"; - reg = <0x0 0xfe640000 0x0 0x20000>; - msi-controller; - #msi-cells = <1>; - }; - - its1: msi-controller@fe660000 { - compatible = "arm,gic-v3-its"; - reg = <0x0 0xfe660000 0x0 0x20000>; - msi-controller; - #msi-cells = <1>; - }; - - ppi-partitions { - ppi_partition0: interrupt-partition-0 { - affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; - }; - - ppi_partition1: interrupt-partition-1 { - affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>; - }; - }; - }; - - dmac0: dma-controller@fea10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfea10000 0x0 0x4000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dma-controller@fea30000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfea30000 0x0 0x4000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - i2c1: i2c@fea90000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfea90000 0x0 0x1000>; - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c1m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@feaa0000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfeaa0000 0x0 0x1000>; - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c2m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@feab0000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfeab0000 0x0 0x1000>; - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c3m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@feac0000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfeac0000 0x0 0x1000>; - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c4m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@fead0000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfead0000 0x0 0x1000>; - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c5m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - timer0: timer@feae0000 { - compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; - reg = <0x0 0xfeae0000 0x0 0x20>; - interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; - clock-names = "pclk", "timer"; - }; - - wdt: watchdog@feaf0000 { - compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; - reg = <0x0 0xfeaf0000 0x0 0x100>; - clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; - clock-names = "tclk", "pclk"; - interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; - }; - - spi0: spi@feb00000 { - compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfeb00000 0x0 0x1000>; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 14>, <&dmac0 15>; - dma-names = "tx", "rx"; - num-cs = <2>; - pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@feb10000 { - compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfeb10000 0x0 0x1000>; - interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac0 16>, <&dmac0 17>; - dma-names = "tx", "rx"; - num-cs = <2>; - pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@feb20000 { - compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfeb20000 0x0 0x1000>; - interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac1 15>, <&dmac1 16>; - dma-names = "tx", "rx"; - num-cs = <2>; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi3: spi@feb30000 { - compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfeb30000 0x0 0x1000>; - interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac1 17>, <&dmac1 18>; - dma-names = "tx", "rx"; - num-cs = <2>; - pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart1: serial@feb40000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb40000 0x0 0x100>; - interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 8>, <&dmac0 9>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart1m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart2: serial@feb50000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb50000 0x0 0x100>; - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 10>, <&dmac0 11>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart2m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart3: serial@feb60000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb60000 0x0 0x100>; - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 12>, <&dmac0 13>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart3m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart4: serial@feb70000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb70000 0x0 0x100>; - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac1 9>, <&dmac1 10>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart4m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart5: serial@feb80000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb80000 0x0 0x100>; - interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac1 11>, <&dmac1 12>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart5m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart6: serial@feb90000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeb90000 0x0 0x100>; - interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac1 13>, <&dmac1 14>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart6m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart7: serial@feba0000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfeba0000 0x0 0x100>; - interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac2 7>, <&dmac2 8>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart7m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart8: serial@febb0000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfebb0000 0x0 0x100>; - interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac2 9>, <&dmac2 10>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart8m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart9: serial@febc0000 { - compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfebc0000 0x0 0x100>; - interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac2 11>, <&dmac2 12>; - dma-names = "tx", "rx"; - pinctrl-0 = <&uart9m1_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - pwm4: pwm@febd0000 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebd0000 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm4m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm5: pwm@febd0010 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebd0010 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm5m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm6: pwm@febd0020 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebd0020 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm6m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm7: pwm@febd0030 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebd0030 0x0 0x10>; - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm7m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm8: pwm@febe0000 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebe0000 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm8m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm9: pwm@febe0010 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebe0010 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm9m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm10: pwm@febe0020 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebe0020 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm10m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm11: pwm@febe0030 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebe0030 0x0 0x10>; - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm11m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm12: pwm@febf0000 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebf0000 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm12m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm13: pwm@febf0010 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebf0010 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm13m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm14: pwm@febf0020 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebf0020 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm14m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm15: pwm@febf0030 { - compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm"; - reg = <0x0 0xfebf0030 0x0 0x10>; - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; - clock-names = "pwm", "pclk"; - pinctrl-0 = <&pwm15m0_pins>; - pinctrl-names = "default"; - #pwm-cells = <3>; - status = "disabled"; - }; - - tsadc: tsadc@fec00000 { - compatible = "rockchip,rk3588-tsadc"; - reg = <0x0 0xfec00000 0x0 0x400>; - interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - assigned-clocks = <&cru CLK_TSADC>; - assigned-clock-rates = <2000000>; - resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; - reset-names = "tsadc-apb", "tsadc"; - rockchip,hw-tshut-temp = <120000>; - rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ - pinctrl-0 = <&tsadc_gpio_func>; - pinctrl-1 = <&tsadc_shut>; - pinctrl-names = "gpio", "otpout"; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - - saradc: adc@fec10000 { - compatible = "rockchip,rk3588-saradc"; - reg = <0x0 0xfec10000 0x0 0x10000>; - interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; - #io-channel-cells = <1>; - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_P_SARADC>; - reset-names = "saradc-apb"; - status = "disabled"; - }; - - i2c6: i2c@fec80000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfec80000 0x0 0x1000>; - clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c6m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c7: i2c@fec90000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfec90000 0x0 0x1000>; - clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c7m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c8: i2c@feca0000 { - compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfeca0000 0x0 0x1000>; - clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-0 = <&i2c8m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@fecb0000 { - compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xfecb0000 0x0 0x1000>; - interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>; - clock-names = "spiclk", "apb_pclk"; - dmas = <&dmac2 13>, <&dmac2 14>; - dma-names = "tx", "rx"; - num-cs = <2>; - pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - otp: efuse@fecc0000 { - compatible = "rockchip,rk3588-otp"; - reg = <0x0 0xfecc0000 0x0 0x400>; - clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, - <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; - clock-names = "otp", "apb_pclk", "phy", "arb"; - resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, - <&cru SRST_OTPC_ARB>; - reset-names = "otp", "apb", "arb"; - #address-cells = <1>; - #size-cells = <1>; - - cpu_code: cpu-code@2 { - reg = <0x02 0x2>; - }; - - otp_id: id@7 { - reg = <0x07 0x10>; - }; - - cpub0_leakage: cpu-leakage@17 { - reg = <0x17 0x1>; - }; - - cpub1_leakage: cpu-leakage@18 { - reg = <0x18 0x1>; - }; - - cpul_leakage: cpu-leakage@19 { - reg = <0x19 0x1>; - }; - - log_leakage: log-leakage@1a { - reg = <0x1a 0x1>; - }; - - gpu_leakage: gpu-leakage@1b { - reg = <0x1b 0x1>; - }; - - otp_cpu_version: cpu-version@1c { - reg = <0x1c 0x1>; - bits = <3 3>; - }; - - npu_leakage: npu-leakage@28 { - reg = <0x28 0x1>; - }; - - codec_leakage: codec-leakage@29 { - reg = <0x29 0x1>; - }; - }; - - dmac2: dma-controller@fed10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfed10000 0x0 0x4000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - hdptxphy_hdmi0: phy@fed60000 { - compatible = "rockchip,rk3588-hdptx-phy"; - reg = <0x0 0xfed60000 0x0 0x2000>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; - clock-names = "ref", "apb"; - #phy-cells = <0>; - resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, - <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, - <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, - <&cru SRST_HDPTX0_LCPLL>; - reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", - "lcpll"; - rockchip,grf = <&hdptxphy0_grf>; - status = "disabled"; - }; - - usbdp_phy0: phy@fed80000 { - compatible = "rockchip,rk3588-usbdp-phy"; - reg = <0x0 0xfed80000 0x0 0x10000>; - #phy-cells = <1>; - clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, - <&cru CLK_USBDP_PHY0_IMMORTAL>, - <&cru PCLK_USBDPPHY0>, - <&u2phy0>; - clock-names = "refclk", "immortal", "pclk", "utmi"; - resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, - <&cru SRST_USBDP_COMBO_PHY0_CMN>, - <&cru SRST_USBDP_COMBO_PHY0_LANE>, - <&cru SRST_USBDP_COMBO_PHY0_PCS>, - <&cru SRST_P_USBDPPHY0>; - reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; - rockchip,u2phy-grf = <&usb2phy0_grf>; - rockchip,usb-grf = <&usb_grf>; - rockchip,usbdpphy-grf = <&usbdpphy0_grf>; - rockchip,vo-grf = <&vo0_grf>; - status = "disabled"; - }; - - combphy0_ps: phy@fee00000 { - compatible = "rockchip,rk3588-naneng-combphy"; - reg = <0x0 0xfee00000 0x0 0x100>; - clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, - <&cru PCLK_PHP_ROOT>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>; - reset-names = "phy", "apb"; - rockchip,pipe-grf = <&php_grf>; - rockchip,pipe-phy-grf = <&pipe_phy0_grf>; - status = "disabled"; - }; - - combphy2_psu: phy@fee20000 { - compatible = "rockchip,rk3588-naneng-combphy"; - reg = <0x0 0xfee20000 0x0 0x100>; - clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>, - <&cru PCLK_PHP_ROOT>; - clock-names = "ref", "apb", "pipe"; - assigned-clocks = <&cru CLK_REF_PIPE_PHY2>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>; - reset-names = "phy", "apb"; - rockchip,pipe-grf = <&php_grf>; - rockchip,pipe-phy-grf = <&pipe_phy2_grf>; - status = "disabled"; - }; - - system_sram2: sram@ff001000 { - compatible = "mmio-sram"; - reg = <0x0 0xff001000 0x0 0xef000>; - ranges = <0x0 0x0 0xff001000 0xef000>; - #address-cells = <1>; - #size-cells = <1>; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3588-pinctrl"; - ranges; - rockchip,grf = <&ioc>; - #address-cells = <2>; - #size-cells = <2>; - - gpio0: gpio@fd8a0000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfd8a0000 0x0 0x100>; - interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 32>; - interrupt-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - }; - - gpio1: gpio@fec20000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfec20000 0x0 0x100>; - interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; - gpio-controller; - gpio-ranges = <&pinctrl 0 32 32>; - interrupt-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - }; - - gpio2: gpio@fec30000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfec30000 0x0 0x100>; - interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; - gpio-controller; - gpio-ranges = <&pinctrl 0 64 32>; - interrupt-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - }; - - gpio3: gpio@fec40000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfec40000 0x0 0x100>; - interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; - gpio-controller; - gpio-ranges = <&pinctrl 0 96 32>; - interrupt-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - }; - - gpio4: gpio@fec50000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfec50000 0x0 0x100>; - interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; - gpio-controller; - gpio-ranges = <&pinctrl 0 128 32>; - interrupt-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - }; - }; -}; - -#include "rk3588s-pinctrl.dtsi" +#include "rk3588-base.dtsi" +#include "rk3588-opp.dtsi" diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi index dbdb79f8e959..4c080df48724 100644 --- a/arch/arm64/boot/dts/sprd/ums512.dtsi +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -136,16 +136,22 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>, <&CPU4>, <&CPU5>; + }; + + pmu-a75 { + compatible = "arm,cortex-a75-pmu"; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU6>, <&CPU7>; }; soc: soc { diff --git a/arch/arm64/boot/dts/sprd/ums9620.dtsi b/arch/arm64/boot/dts/sprd/ums9620.dtsi index 2191f0a4811b..2458071320c9 100644 --- a/arch/arm64/boot/dts/sprd/ums9620.dtsi +++ b/arch/arm64/boot/dts/sprd/ums9620.dtsi @@ -144,16 +144,22 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU4>, <&CPU5>, <&CPU6>, <&CPU7>; }; soc: soc { diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index 7a82896dcbf6..8fdd5f020425 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -6,6 +6,65 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + eth2_rgmii_pins_a: eth2-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('C', 8, AF10)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 9, AF10)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('C', 10, AF10)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('C', 4, AF10)>; /* ETH_RGMII_TX_CTL */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('F', 7, AF10)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('C', 6, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 5, AF10)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins4 { + pinmux = <STM32_PINMUX('G', 0, AF10)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 12, AF10)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('F', 9, AF10)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + pins5 { + pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('C', 8, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('F', 8, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('C', 6, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 0, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('C', 3, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('F', 6, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('B', 5, AF9)>, /* I2C2_SCL */ @@ -128,6 +187,47 @@ <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */ }; }; + + usart6_pins_a: usart6-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 13, AF3)>, /* USART6_TX */ + <STM32_PINMUX('G', 5, AF3)>; /* USART6_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 14, AF3)>, /* USART6_RX */ + <STM32_PINMUX('F', 15, AF3)>; /* USART6_CTS_NSS */ + bias-pull-up; + }; + }; + + usart6_idle_pins_a: usart6-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 13, ANALOG)>, /* USART6_TX */ + <STM32_PINMUX('F', 15, ANALOG)>; /* USART6_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('G', 5, AF3)>; /* USART6_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('F', 14, AF3)>; /* USART6_RX */ + bias-pull-up; + }; + }; + + usart6_sleep_pins_a: usart6-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 13, ANALOG)>, /* USART6_TX */ + <STM32_PINMUX('G', 5, ANALOG)>, /* USART6_RTS */ + <STM32_PINMUX('F', 15, ANALOG)>, /* USART6_CTS_NSS */ + <STM32_PINMUX('F', 14, ANALOG)>; /* USART6_RX */ + }; + }; }; &pinctrl_z { diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index dcd0656d67a8..1167cf63d7e8 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/st,stm32mp25-rcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/st,stm32mp25-rcc.h> +#include <dt-bindings/regulator/st,stm32mp25-regulator.h> / { #address-cells = <2>; @@ -20,6 +21,8 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; }; }; @@ -51,9 +54,11 @@ }; firmware { - optee { + optee: optee { compatible = "linaro,optee-tz"; method = "smc"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; scmi { @@ -71,6 +76,40 @@ reg = <0x16>; #reset-cells = <1>; }; + + scmi_voltd: protocol@17 { + reg = <0x17>; + + scmi_regu: regulators { + #address-cells = <1>; + #size-cells = <0>; + + scmi_vddio1: regulator@0 { + reg = <VOLTD_SCMI_VDDIO1>; + regulator-name = "vddio1"; + }; + scmi_vddio2: regulator@1 { + reg = <VOLTD_SCMI_VDDIO2>; + regulator-name = "vddio2"; + }; + scmi_vddio3: regulator@2 { + reg = <VOLTD_SCMI_VDDIO3>; + regulator-name = "vddio3"; + }; + scmi_vddio4: regulator@3 { + reg = <VOLTD_SCMI_VDDIO4>; + regulator-name = "vddio4"; + }; + scmi_vdd33ucpd: regulator@5 { + reg = <VOLTD_SCMI_UCPD>; + regulator-name = "vdd33ucpd"; + }; + scmi_vdda18adc: regulator@7 { + reg = <VOLTD_SCMI_ADC>; + regulator-name = "vdda18adc"; + }; + }; + }; }; }; @@ -88,6 +127,20 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + power-domains = <&RET_PD>; + }; + + RET_PD: power-domain-retention { + #power-domain-cells = <0>; + }; }; timer { @@ -107,6 +160,75 @@ interrupt-parent = <&intc>; ranges = <0x0 0x0 0x0 0x80000000>; + hpdma: dma-controller@40400000 { + compatible = "st,stm32mp25-dma3"; + reg = <0x40400000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk CK_SCMI_HPDMA1>; + #dma-cells = <3>; + }; + + hpdma2: dma-controller@40410000 { + compatible = "st,stm32mp25-dma3"; + reg = <0x40410000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk CK_SCMI_HPDMA2>; + #dma-cells = <3>; + }; + + hpdma3: dma-controller@40420000 { + compatible = "st,stm32mp25-dma3"; + reg = <0x40420000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk CK_SCMI_HPDMA3>; + #dma-cells = <3>; + }; + rifsc: bus@42080000 { compatible = "st,stm32mp25-rifsc", "simple-bus"; reg = <0x42080000 0x1000>; @@ -148,6 +270,33 @@ status = "disabled"; }; + usart3: serial@400f0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400f0000 0x400>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_USART3>; + access-controllers = <&rifsc 33>; + status = "disabled"; + }; + + uart4: serial@40100000 { + compatible = "st,stm32h7-uart"; + reg = <0x40100000 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_UART4>; + access-controllers = <&rifsc 34>; + status = "disabled"; + }; + + uart5: serial@40110000 { + compatible = "st,stm32h7-uart"; + reg = <0x40110000 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_UART5>; + access-controllers = <&rifsc 35>; + status = "disabled"; + }; + i2c1: i2c@40120000 { compatible = "st,stm32mp25-i2c"; reg = <0x40120000 0x400>; @@ -239,6 +388,15 @@ status = "disabled"; }; + usart6: serial@40220000 { + compatible = "st,stm32h7-uart"; + reg = <0x40220000 0x400>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_USART6>; + access-controllers = <&rifsc 36>; + status = "disabled"; + }; + spi1: spi@40230000 { #address-cells = <1>; #size-cells = <0>; @@ -275,6 +433,24 @@ status = "disabled"; }; + uart9: serial@402c0000 { + compatible = "st,stm32h7-uart"; + reg = <0x402c0000 0x400>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_UART9>; + access-controllers = <&rifsc 39>; + status = "disabled"; + }; + + usart1: serial@40330000 { + compatible = "st,stm32h7-uart"; + reg = <0x40330000 0x400>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_USART1>; + access-controllers = <&rifsc 31>; + status = "disabled"; + }; + spi6: spi@40350000 { #address-cells = <1>; #size-cells = <0>; @@ -299,6 +475,24 @@ status = "disabled"; }; + uart7: serial@40370000 { + compatible = "st,stm32h7-uart"; + reg = <0x40370000 0x400>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_UART7>; + access-controllers = <&rifsc 37>; + status = "disabled"; + }; + + uart8: serial@40380000 { + compatible = "st,stm32h7-uart"; + reg = <0x40380000 0x400>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_KER_UART8>; + access-controllers = <&rifsc 38>; + status = "disabled"; + }; + spi8: spi@46020000 { #address-cells = <1>; #size-cells = <0>; @@ -338,6 +532,55 @@ access-controllers = <&rifsc 76>; status = "disabled"; }; + + ethernet1: ethernet@482c0000 { + compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20"; + reg = <0x482c0000 0x4000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ptp_ref", + "ethstp", + "eth-ck"; + clocks = <&rcc CK_ETH1_MAC>, + <&rcc CK_ETH1_TX>, + <&rcc CK_ETH1_RX>, + <&rcc CK_KER_ETH1PTP>, + <&rcc CK_ETH1_STP>, + <&rcc CK_KER_ETH1>; + snps,axi-config = <&stmmac_axi_config_1>; + snps,mixed-burst; + snps,mtl-rx-config = <&mtl_rx_setup_1>; + snps,mtl-tx-config = <&mtl_tx_setup_1>; + snps,pbl = <2>; + snps,tso; + st,syscon = <&syscfg 0x3000>; + access-controllers = <&rifsc 60>; + status = "disabled"; + + mtl_rx_setup_1: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + mtl_tx_setup_1: tx-queues-config { + snps,tx-queues-to-use = <4>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + }; + + stmmac_axi_config_1: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; }; bsec: efuse@44000000 { @@ -441,6 +684,7 @@ <&scmi_clk CK_SCMI_TIMG2>, <&scmi_clk CK_SCMI_PLL3>, <&clk_dsi_txbyte>; + access-controllers = <&rifsc 156>; }; exti1: interrupt-controller@44220000 { diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi index 029f88981961..eeceb086252b 100644 --- a/arch/arm64/boot/dts/st/stm32mp253.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi @@ -12,6 +12,8 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; }; @@ -21,6 +23,13 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + psci { + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + }; + }; + timer { interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -28,3 +37,58 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; }; + +&optee { + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + +&rifsc { + ethernet2: ethernet@482d0000 { + compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20"; + reg = <0x482d0000 0x4000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ptp_ref", + "ethstp", + "eth-ck"; + clocks = <&rcc CK_ETH2_MAC>, + <&rcc CK_ETH2_TX>, + <&rcc CK_ETH2_RX>, + <&rcc CK_KER_ETH2PTP>, + <&rcc CK_ETH2_STP>, + <&rcc CK_KER_ETH2>; + snps,axi-config = <&stmmac_axi_config_2>; + snps,mixed-burst; + snps,mtl-rx-config = <&mtl_rx_setup_2>; + snps,mtl-tx-config = <&mtl_tx_setup_2>; + snps,pbl = <2>; + snps,tso; + st,syscon = <&syscfg 0x3400>; + access-controllers = <&rifsc 61>; + status = "disabled"; + + mtl_rx_setup_2: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + mtl_tx_setup_2: tx-queues-config { + snps,tx-queues-to-use = <4>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + }; + + stmmac_axi_config_2: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 27b7360e5dba..214191a8322b 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/st,stm32mp25-regulator.h> #include "stm32mp257.dtsi" #include "stm32mp25xf.dtsi" #include "stm32mp25-pinctrl.dtsi" @@ -17,7 +18,9 @@ compatible = "st,stm32mp257f-ev1", "st,stm32mp257"; aliases { + ethernet0 = ðernet2; serial0 = &usart2; + serial1 = &usart6; }; chosen { @@ -40,14 +43,6 @@ no-map; }; }; - - vdd_sdcard: vdd-sdcard { - compatible = "regulator-fixed"; - regulator-name = "vdd_sdcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; }; &arm_wdt { @@ -55,6 +50,29 @@ status = "okay"; }; +ðernet2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + max-speed = <1000>; + phy-handle = <&phy0_eth2>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0_eth2: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <1>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + &i2c2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; @@ -75,6 +93,37 @@ status = "disabled"; }; +&scmi_regu { + scmi_vddio1: regulator@0 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + scmi_vddcore: regulator@11 { + reg = <VOLTD_SCMI_STPMIC2_BUCK2>; + regulator-name = "vddcore"; + }; + scmi_v1v8: regulator@14 { + reg = <VOLTD_SCMI_STPMIC2_BUCK5>; + regulator-name = "v1v8"; + }; + scmi_v3v3: regulator@16 { + reg = <VOLTD_SCMI_STPMIC2_BUCK7>; + regulator-name = "v3v3"; + }; + scmi_vdd_emmc: regulator@18 { + reg = <VOLTD_SCMI_STPMIC2_LDO2>; + regulator-name = "vdd_emmc"; + }; + scmi_vdd3v3_usb: regulator@20 { + reg = <VOLTD_SCMI_STPMIC2_LDO4>; + regulator-name = "vdd3v3_usb"; + }; + scmi_vdd_sdcard: regulator@23 { + reg = <VOLTD_SCMI_STPMIC2_LDO7>; + regulator-name = "vdd_sdcard"; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a>; @@ -84,7 +133,8 @@ disable-wp; st,neg-edge; bus-width = <4>; - vmmc-supply = <&vdd_sdcard>; + vmmc-supply = <&scmi_vdd_sdcard>; + vqmmc-supply = <&scmi_vddio1>; status = "okay"; }; @@ -109,3 +159,12 @@ pinctrl-2 = <&usart2_sleep_pins_a>; status = "okay"; }; + +&usart6 { + pinctrl-names = "default", "idle", "sleep"; + pinctrl-0 = <&usart6_pins_a>; + pinctrl-1 = <&usart6_idle_pins_a>; + pinctrl-2 = <&usart6_sleep_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 2c327cc320cf..e20b27ddf901 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -22,11 +22,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb @@ -44,16 +47,26 @@ k3-am642-hummingboard-t-usb3-dtbs := \ k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb +k3-am642-evm-nand-dtbs := k3-am642-evm.dtb k3-am642-evm-nand.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo +# Common overlays for the phyCORE-AM6* family of boards +dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-eth-phy.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-rtc.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-spi-nor.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-qspi-nor.dtbo + # Boards with AM65x SoC k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb \ k3-am654-base-board-rocktech-rk101-panel.dtbo \ @@ -81,6 +94,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb # Boards with J721e SoC k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo @@ -101,14 +115,27 @@ dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo # Build time test only, enabled by CONFIG_OF_ALL_DTBS k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-ov5640.dtbo k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-tevi-ov5640.dtbo +k3-am625-phyboard-lyra-1-4-ghz-opp.dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo +k3-am625-phyboard-lyra-disable-eth-phy-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-eth-phy.dtbo +k3-am625-phyboard-lyra-disable-rtc-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-rtc.dtbo +k3-am625-phyboard-lyra-disable-spi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-spi-nor.dtbo k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ k3-am62x-phyboard-lyra-gpio-fan.dtbo +k3-am625-phyboard-lyra-qspi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-qspi-nor.dtbo k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \ k3-am62x-sk-csi2-imx219.dtbo k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \ @@ -132,8 +159,20 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \ k3-am62x-sk-csi2-tevi-ov5640.dtbo k3-am642-evm-icssg1-dualemac-dtbs := \ k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo +k3-am642-evm-icssg1-dualemac-mii-dtbs := \ + k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac-mii.dtbo +k3-am642-phyboard-electra-disable-eth-phy-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-eth-phy.dtbo +k3-am642-phyboard-electra-disable-rtc-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-rtc.dtbo +k3-am642-phyboard-electra-disable-spi-nor-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-spi-nor.dtbo +k3-am642-phyboard-electra-qspi-nor-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-qspi-nor.dtbo k3-am642-phyboard-electra-gpio-fan-dtbs := \ k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo +k3-am642-phyboard-electra-pcie-usb2-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ @@ -142,12 +181,20 @@ k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \ k3-j721e-sk-csi2-dual-imx219.dtbo k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \ k3-j721e-sk-csi2-dual-imx219.dtbo +k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \ + k3-j721e-common-proc-board-infotainment.dtbo k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \ k3-j721e-evm-pcie0-ep.dtbo k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \ k3-j721e-sk-csi2-dual-imx219.dtbo k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \ k3-j721s2-evm-pcie1-ep.dtbo +k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \ + k3-j784s4-evm-pcie0-pcie1-ep.dtbo +k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \ + k3-j784s4-evm-quad-port-eth-exp1.dtbo +k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \ + k3-j784s4-evm-usxgmii-exp1-exp2.dtbo dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am625-beagleplay-csi2-tevi-ov5640.dtb \ k3-am625-sk-csi2-imx219.dtb \ @@ -162,17 +209,23 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am62p5-sk-csi2-ov5640.dtb \ k3-am62p5-sk-csi2-tevi-ov5640.dtb \ k3-am642-evm-icssg1-dualemac.dtb \ + k3-am642-evm-icssg1-dualemac-mii.dtb \ k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ k3-am68-sk-base-board-csi2-dual-imx219.dtb \ k3-am69-sk-csi2-dual-imx219.dtb \ + k3-j721e-common-proc-board-infotainment.dtb \ k3-j721e-evm-pcie0-ep.dtb \ k3-j721e-sk-csi2-dual-imx219.dtb \ - k3-j721s2-evm-pcie1-ep.dtb + k3-j721s2-evm-pcie1-ep.dtb \ + k3-j784s4-evm-pcie0-pcie1-ep.dtb \ + k3-j784s4-evm-quad-port-eth-exp1.dtb \ + k3-j784s4-evm-usxgmii-exp1-exp2.dtb # Enable support for device-tree overlays DTC_FLAGS_k3-am625-beagleplay += -@ DTC_FLAGS_k3-am625-phyboard-lyra-rdk += -@ +DTC_FLAGS_k3-am62a7-phyboard-lyra-rdk += -@ DTC_FLAGS_k3-am625-sk += -@ DTC_FLAGS_k3-am62-lp-sk += -@ DTC_FLAGS_k3-am62a7-sk += -@ @@ -186,3 +239,4 @@ DTC_FLAGS_k3-am69-sk += -@ DTC_FLAGS_k3-j721e-common-proc-board += -@ DTC_FLAGS_k3-j721e-sk += -@ DTC_FLAGS_k3-j721s2-common-proc-board += -@ +DTC_FLAGS_k3-j784s4-evm += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso new file mode 100644 index 000000000000..173ac60723b6 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "k3-pinctrl.h" + +&mcasp1 { + status = "disabled"; +}; + +&main_pmx0 { + gpmc0_pins_default: gpmc0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */ + AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */ + AM62X_IOPAD(0x0044, PIN_INPUT, 0) /* (L20) GPMC0_AD2 */ + AM62X_IOPAD(0x0048, PIN_INPUT, 0) /* (L21) GPMC0_AD3 */ + AM62X_IOPAD(0x004c, PIN_INPUT, 0) /* (M21) GPMC0_AD4 */ + AM62X_IOPAD(0x0050, PIN_INPUT, 0) /* (L17) GPMC0_AD5 */ + AM62X_IOPAD(0x0054, PIN_INPUT, 0) /* (L18) GPMC0_AD6 */ + AM62X_IOPAD(0x0058, PIN_INPUT, 0) /* (M20) GPMC0_AD7 */ + AM62X_IOPAD(0x0098, PIN_INPUT, 0) /* (P21) GPMC0_WAIT0 */ + AM62X_IOPAD(0x00a8, PIN_OUTPUT, 0) /* (J18) GPMC0_CSn0 */ + AM62X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (K20) GPMC0_ADVn_ALE */ + AM62X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (K21) GPMC0_OEn_REn */ + AM62X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (J17) GPMC0_WEn */ + AM62X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (K17) GPMC0_BE0n_CLE */ + AM62X_IOPAD(0x00a0, PIN_OUTPUT, 0) /* (J20) GPMC0_WPn */ + >; + }; +}; + +&elm0 { + status = "okay"; +}; + +&gpmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gpmc0_pins_default>; + #address-cells = <2>; + #size-cells = <1>; + + nand@0,0 { + compatible = "ti,am64-nand"; + reg = <0 0 64>; /* device IO registers */ + interrupt-parent = <&gpmc0>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-polled"; + ti,nand-ecc-opt = "bch8"; /* BCH8: Bootrom limitation */ + ti,elm-id = <&elm0>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <25>; + gpmc,adv-wr-off-ns = <25>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <3>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "NAND.tiboot3"; + reg = <0x00000000 0x00200000>; /* 2M */ + }; + partition@200000 { + label = "NAND.tispl"; + reg = <0x00200000 0x00200000>; /* 2M */ + }; + partition@400000 { + label = "NAND.tiboot3.backup"; /* 2M */ + reg = <0x00400000 0x00200000>; /* BootROM looks at 4M */ + }; + partition@600000 { + label = "NAND.u-boot"; + reg = <0x00600000 0x00400000>; /* 4M */ + }; + partition@a00000 { + label = "NAND.u-boot-env"; + reg = <0x00a00000 0x00040000>; /* 256K */ + }; + partition@a40000 { + label = "NAND.u-boot-env.backup"; + reg = <0x00a40000 0x00040000>; /* 256K */ + }; + partition@a80000 { + label = "NAND.file-system"; + reg = <0x00a80000 0x3f580000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 9a17bd3e59c9..8e9fc00a6b3c 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -228,3 +228,7 @@ &tlv320aic3106 { DVDD-supply = <&buck2_reg>; }; + +&gpmc0 { + ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 448a59dc53a7..328929c740dc 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -141,8 +141,8 @@ compatible = "ti,am64-dmss-pktdma"; reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, - <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x4aa00000 0x00 0x20000>, + <0x00 0x4b800000 0x00 0x200000>, <0x00 0x485e0000 0x00 0x10000>, <0x00 0x484a0000 0x00 0x2000>, <0x00 0x484c0000 0x00 0x2000>, @@ -207,10 +207,6 @@ crypto: crypto@40900000 { compatible = "ti,am62-sa3ul"; reg = <0x00 0x40900000 0x00 0x1200>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; - dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, <&main_pktdma 0x7507 0>; dma-names = "tx", "rx1", "rx2"; @@ -739,7 +735,7 @@ label = "port1"; phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; - ti,syscon-efuse = <&wkup_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; }; cpsw_port2: port@2 { @@ -1057,4 +1053,33 @@ status = "disabled"; }; + gpmc0: memory-controller@3b000000 { + compatible = "ti,am64-gpmc"; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 80 0>; + clock-names = "fck"; + reg = <0x00 0x03b000000 0x00 0x400>, + <0x00 0x050000000 0x00 0x8000000>; + reg-names = "cfg", "data"; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <3>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + elm0: ecc@25010000 { + compatible = "ti,am64-elm"; + reg = <0x00 0x25010000 0x00 0x2000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 54 0>; + clock-names = "fck"; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi index 74eec1a1abca..5c1284b802ad 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -14,6 +14,7 @@ simple-audio-card,bitclock-master = <&codec_dai>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "verdin-nau8822"; simple-audio-card,routing = "Headphones", "LHP", @@ -34,7 +35,6 @@ "Line", "Line In"; codec_dai: simple-audio-card,codec { - clocks = <&audio_refclk1>; sound-dai = <&nau8822_1a>; }; @@ -107,6 +107,8 @@ reg = <0x1a>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2s1_mclk>; + clock-names = "mclk"; + clocks = <&audio_refclk1>; #sound-dai-cells = <0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 2038c5e04639..359f53f3e019 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -1364,8 +1364,6 @@ 0 0 0 0 >; tdm-slots = <2>; - rx-num-evt = <32>; - tx-num-evt = <32>; #sound-dai-cells = <0>; status = "disabled"; }; @@ -1382,8 +1380,6 @@ 0 0 0 0 >; tdm-slots = <2>; - rx-num-evt = <32>; - tx-num-evt = <32>; #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 66ddf2dc51af..e0afafd532a5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -22,6 +22,11 @@ reg = <0x14 0x4>; }; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + usb0_phy_ctrl: syscon@4008 { compatible = "ti,am62-usb-phy-ctrl", "syscon"; reg = <0x4008 0x4>; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index f0781f2bea29..bfb55ca11323 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -68,11 +68,13 @@ <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */ <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */ <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 18e3070a8683..70de288d728e 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -924,6 +924,4 @@ 0 0 0 0 0 0 0 0 >; - tx-num-evt = <32>; - rx-num-evt = <32>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso new file mode 100644 index 000000000000..6ec6d57ec49c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2024 PHYTEC America LLC + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +&vdd_core { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; +}; + +&a53_opp_table { + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts index 50d2573c840e..4fa5efdffcd7 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -7,477 +7,12 @@ * https://www.phytec.com/product/phyboard-am62x */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/net/ti-dp83867.h> #include "k3-am625.dtsi" #include "k3-am62-phycore-som.dtsi" +#include "k3-am62x-phyboard-lyra.dtsi" / { compatible = "phytec,am625-phyboard-lyra-rdk", "phytec,am62-phycore-som", "ti,am625"; model = "PHYTEC phyBOARD-Lyra AM625"; - - aliases { - serial2 = &main_uart0; - serial3 = &main_uart1; - mmc1 = &sdhci1; - usb0 = &usb0; - usb1 = &usb1; - ethernet1 = &cpsw_port2; - }; - - can_tc1: can-phy0 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <8000000>; - standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; - }; - - hdmi0: connector-hdmi { - compatible = "hdmi-connector"; - label = "hdmi"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&sii9022_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins_default>; - - key-home { - label = "home"; - linux,code = <KEY_HOME>; - gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - key-menu { - label = "menu"; - linux,code = <KEY_MENU>; - gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "phyBOARD-Lyra"; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "External Speaker", "SPOP", - "External Speaker", "SPOM"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp2>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&audio_codec>; - clocks = <&audio_refclk1>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; - - led-1 { - gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - - led-2 { - gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - }; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_mmc: regulator-vcc-3v3-mmc { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_MMC"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_sw: regulator-vcc-3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&main_pmx0 { - audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ - >; - }; - - gpio_keys_pins_default: gpio-keys-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ - >; - }; - - gpio_exp_int_pins_default: gpio-exp-int-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ - >; - }; - - hdmi_int_pins_default: hdmi-int-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ - >; - }; - - main_dss0_pins_default: main-dss0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ - AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ - AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ - AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ - AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ - AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ - AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ - AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ - AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ - AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ - AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ - AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ - AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ - AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ - AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ - AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ - AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ - AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ - AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ - AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_mcan0_pins_default: main-mcan0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ - AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ - >; - }; - - main_mcasp2_pins_default: main-mcasp2-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */ - AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */ - AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */ - AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ - AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ - AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ - AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ - AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ - AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ - >; - }; - - main_rgmii2_pins_default: main-rgmii2-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ - AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ - AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ - AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ - AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ - AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ - AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ - AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ - AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ - AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ - AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ - AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ - AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ - AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ - AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ - >; - }; - - main_usb1_pins_default: main-usb1-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; - - user_leds_pins_default: user-leds-default-pins { - pinctrl-single,pins = < - AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ - >; - }; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy3>; -}; - -&cpsw3g_mdio { - cpsw3g_phy3: ethernet-phy@3 { - compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; - reg = <3>; - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&dss { - pinctrl-names = "default"; - pinctrl-0 = <&main_dss0_pins_default>; - status = "okay"; -}; - -&dss_ports { - #address-cells = <1>; - #size-cells = <0>; - - /* VP2: DPI/HDMI Output */ - port@1 { - reg = <1>; - - dpi1_out: endpoint { - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&main_i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <100000>; - status = "okay"; - - audio_codec: audio-codec@18 { - pinctrl-names = "default"; - pinctrl-0 = <&audio_ext_refclk1_pins_default>; - - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3007"; - reg = <0x18>; - ai3x-micbias-vg = <2>; - - AVDD-supply = <&vcc_3v3_sw>; - IOVDD-supply = <&vcc_3v3_sw>; - DRVDD-supply = <&vcc_3v3_sw>; - DVDD-supply = <&vcc_1v8>; - }; - - gpio_exp: gpio-expander@21 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio_exp_int_pins_default>; - compatible = "nxp,pcf8574"; - reg = <0x21>; - interrupt-parent = <&main_gpio1>; - interrupts = <49 0>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-line-names = "", "GPIO1_CAN0_nEN", - "GPIO2_LED2", "GPIO3_LVDS_GPIO", - "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", - "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; - }; - - usb-pd@22 { - compatible = "ti,tps6598x"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - self-powered; - data-role = "dual"; - power-role = "sink"; - port { - usb_con_hs: endpoint { - remote-endpoint = <&typec_hs>; - }; - }; - }; - }; - - sii9022: bridge-hdmi@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - - interrupt-parent = <&main_gpio0>; - interrupts = <16 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_int_pins_default>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sii9022_in: endpoint { - remote-endpoint = <&dpi1_out>; - }; - }; - - port@1 { - reg = <1>; - - sii9022_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - eeprom@51 { - compatible = "atmel,24c02"; - pagesize = <16>; - reg = <0x51>; - }; -}; - -&main_mcan0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan0_pins_default>; - phys = <&can_tc1>; - status = "okay"; -}; - -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - status = "okay"; -}; - -&main_uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; - /* Main UART1 may be used by TIFS firmware */ - status = "okay"; -}; - -&mcasp2 { - #sound-dai-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&main_mcasp2_pins_default>; - - /* MCASP_IIS_MODE */ - op-mode = <0>; - tdm-slots = <2>; - - /* 0: INACTIVE, 1: TX, 2: RX */ - serial-dir = < - 0 0 1 2 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; - status = "okay"; -}; - -&sdhci1 { - vmmc-supply = <&vcc_3v3_mmc>; - vqmmc-supply = <&vddshv5_sdio>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - disable-wp; - no-1-8-v; - status = "okay"; -}; - -&usbss0 { - ti,vbus-divider; - status = "okay"; -}; - -&usbss1 { - ti,vbus-divider; - status = "okay"; -}; - -&usb0 { - usb-role-switch; - - port { - typec_hs: endpoint { - remote-endpoint = <&usb_con_hs>; - }; - }; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index bf9c2d9c6439..916fcf3cc57d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -59,6 +59,24 @@ reg = <0x4130 0x4>; #clock-cells = <1>; }; + + audio_refclk0: clock-controller@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 8>; + #clock-cells = <0>; + }; + + audio_refclk1: clock-controller@82e4 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e4 0x4>; + clocks = <&k3_clks 157 10>; + assigned-clocks = <&k3_clks 157 10>; + assigned-clock-parents = <&k3_clks 157 18>; + #clock-cells = <0>; + }; }; dmss: bus@48000000 { @@ -120,8 +138,8 @@ compatible = "ti,am64-dmss-pktdma"; reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, - <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x4aa00000 0x00 0x20000>, + <0x00 0x4b800000 0x00 0x200000>, <0x00 0x485e0000 0x00 0x10000>, <0x00 0x484a0000 0x00 0x2000>, <0x00 0x484c0000 0x00 0x2000>, @@ -216,6 +234,14 @@ }; }; + crypto: crypto@40900000 { + compatible = "ti,am62-sa3ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, + <&main_pktdma 0x7507 0>; + dma-names = "tx", "rx1", "rx2"; + }; + secure_proxy_sa3: mailbox@43600000 { compatible = "ti,am654-secure-proxy"; #mbox-cells = <1>; @@ -713,7 +739,7 @@ label = "port1"; phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; - ti,syscon-efuse = <&wkup_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; }; cpsw_port2: port@2 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi new file mode 100644 index 000000000000..a5aceaa39670 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 - 2024 PHYTEC America LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am62a + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM62Ax"; + compatible = "phytec,am62a-phycore-som", "ti,am62a7"; + + aliases { + ethernet0 = &cpsw_port1; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + i2c0 = &main_i2c0; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + spi0 = &ospi0; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x24000000>; + alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>; + linux,cma-default; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + leds_pins_default: leds-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x034, PIN_OUTPUT, 7) /* (K20) OSPI0_CSN2.GPIO0_13 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ + AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ + >; + }; + + main_mdio1_pins_default: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ + AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */ + AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ + AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ + AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ + AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */ + AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */ + AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */ + AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ + AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62AX_IOPAD(0x134, PIN_OUTPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62AX_IOPAD(0x138, PIN_OUTPUT, 0) /* (V16) RGMII1_TD1 */ + AM62AX_IOPAD(0x13c, PIN_OUTPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62AX_IOPAD(0x140, PIN_OUTPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ + AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */ + AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */ + AM62AX_IOPAD(0x038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */ + AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */ + AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */ + AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */ + AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */ + AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */ + AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */ + AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */ + AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&fss { + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_5v0_som>; + buck2-supply = <&vcc_5v0_som>; + buck3-supply = <&vcc_5v0_som>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&vdd_1v8>; + ldo3-supply = <&vcc_5v0_som>; + ldo4-supply = <&vcc_5v0_som>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + ti,power-button; + system-power-controller; + + regulators { + vdd_3v3: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_lpddr4: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + vddshv5_sdio: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + vddr_core: ldo2 { + regulator-name = "VDDR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda_1v8: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_2v5: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + disable-wp; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 98043e9aa316..f5ac101a04df 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -6,9 +6,8 @@ */ &cbass_wakeup { - wkup_conf: syscon@43000000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00 0x43000000 0x00 0x20000>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x43000000 0x20000>; @@ -18,6 +17,11 @@ reg = <0x14 0x4>; }; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + usb0_phy_ctrl: syscon@4008 { compatible = "ti,am62-usb-phy-ctrl", "syscon"; reg = <0x4008 0x4>; @@ -59,7 +63,6 @@ clock-names = "vbus", "osc32k"; power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; wakeup-source; - status = "disabled"; }; wkup_rti0: watchdog@2b000000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts new file mode 100644 index 000000000000..3b93409b23e7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 - 2024 PHYTEC America LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am62a + */ + +#include "k3-am62a7.dtsi" +#include "k3-am62a-phycore-som.dtsi" +#include "k3-am62x-phyboard-lyra.dtsi" + +/ { + compatible = "phytec,am62a7-phyboard-lyra-rdk", + "phytec,am62a-phycore-som", "ti,am62a7"; + model = "PHYTEC phyBOARD-Lyra AM62A7"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index fa43cd0b631e..67faf46d7a35 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -40,6 +40,15 @@ #size-cells = <2>; ranges; + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x24000000>; + alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>; + linux,cma-default; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; @@ -701,8 +710,6 @@ 0 0 0 0 0 0 0 0 >; - tx-num-evt = <32>; - rx-num-evt = <32>; }; &dss { diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi new file mode 100644 index 000000000000..9701fc69aed9 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -0,0 +1,1062 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the MAIN domain peripherals shared by AM62P and J722S + * + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + #address-cells = <1>; + #size-cells = <1>; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_conf: bus@100000 { + compatible = "simple-bus"; + reg = <0x00 0x00100000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; + + epwm_tbclk: clock-controller@4130 { + compatible = "ti,am62-epwm-tbclk"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; + }; + + dmss: bus@48000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; + bootph-all; + + ti,sci-dev-id = <25>; + + secure_proxy_main: mailbox@4d000000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x4d000000 0x00 0x80000>, + <0x00 0x4a600000 0x00 0x80000>, + <0x00 0x4a400000 0x00 0x80000>; + interrupt-names = "rx_012"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + bootph-all; + }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + bootph-all; + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x20000>, + <0x00 0x4b800000 0x00 0x200000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + bootph-all; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ + }; + }; + + dmss_csi: bus@4e000000 { + compatible = "simple-bus"; + ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ti,sci-dev-id = <198>; + + inta_main_dmss_csi: interrupt-controller@4e400000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x4e400000 0x00 0x8000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <200>; + ti,interrupt-ranges = <0 237 8>; + ti,unmapped-event-sources = <&main_bcdma_csi>; + }; + + main_bcdma_csi: dma-controller@4e230000 { + compatible = "ti,am62a-dmss-bcdma-csirx"; + reg = <0x00 0x4e230000 0x00 0x100>, + <0x00 0x4e180000 0x00 0x8000>, + <0x00 0x4e100000 0x00 0x10000>; + reg-names = "gcfg", "rchanrt", "ringrt"; + #dma-cells = <3>; + msi-parent = <&inta_main_dmss_csi>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <199>; + ti,sci-rm-range-rchan = <0x21>; + }; + }; + + dmsc: system-controller@44043000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes = <&secure_proxy_main 12>, + <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x00 0x44043000 0x00 0xfe0>; + bootph-all; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + bootph-all; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + bootph-all; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + bootph-all; + }; + }; + + crypto: crypto@40900000 { + compatible = "ti,am62-sa3ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, + <&main_pktdma 0x7507 0>; + dma-names = "tx", "rx1", "rx2"; + }; + + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + bootph-all; + }; + + main_pmx0: pinctrl@f4000 { + compatible = "pinctrl-single"; + reg = <0x00 0xf4000 0x00 0x2ac>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + bootph-all; + }; + + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; + bootph-pre-ram; + }; + + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 2>; + assigned-clock-parents = <&k3_clks 36 3>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + bootph-all; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 2>; + assigned-clock-parents = <&k3_clks 37 3>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 2>; + assigned-clock-parents = <&k3_clks 38 3>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 2>; + assigned-clock-parents = <&k3_clks 39 3>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 2>; + assigned-clock-parents = <&k3_clks 40 3>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 2>; + assigned-clock-parents = <&k3_clks 41 3>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 2>; + assigned-clock-parents = <&k3_clks 42 3>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 2>; + assigned-clock-parents = <&k3_clks 43 3>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 154 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 155 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 141 0>; + status = "disabled"; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 142 0>; + status = "disabled"; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 143 0>; + status = "disabled"; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00601000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + }; + + sdhci0: mmc@fa10000 { + compatible = "ti,am64-sdhci-8bit"; + reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 1>, <&k3_clks 57 2>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 2>; + assigned-clock-parents = <&k3_clks 57 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + ti,clkbuf-sel = <0x7>; + ti,strobe-sel = <0x77>; + ti,trm-icp = <0x8>; + ti,otap-del-sel-legacy = <0x1>; + ti,otap-del-sel-mmc-hs = <0x1>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x5>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; + status = "disabled"; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + status = "disabled"; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + status = "disabled"; + }; + + usbss0: usb@f900000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f900000 0x00 0x800>, + <0x00 0x0f908000 0x00 0x400>; + clocks = <&k3_clks 161 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb0: usb@31000000 { + compatible = "snps,dwc3"; + reg = <0x00 0x31000000 0x00 0x50000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; + }; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x08000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; + status = "disabled"; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@29000000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29000000 0x00 0x200>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster1: mailbox@29010000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29010000 0x00 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster2: mailbox@29020000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29020000 0x00 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster3: mailbox@29030000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29030000 0x00 0x200>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + status = "disabled"; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan1: can@20711000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20711000 0x00 0x200>, + <0x00 0x20718000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 99 6>, <&k3_clks 99 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + mcasp0: audio-controller@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 190 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 190 0>; + assigned-clock-parents = <&k3_clks 190 2>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: audio-controller@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 191 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 191 0>; + assigned-clock-parents = <&k3_clks 191 2>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: audio-controller@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 192 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 192 0>; + assigned-clock-parents = <&k3_clks 192 2>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + reg = <0x00 0x30102000 0x00 0x1000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dmas = <&main_bcdma_csi 0 0x5000 0>; + dma-names = "rx0"; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + vpu: video-codec@30210000 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x00 0x30210000 0x00 0x10000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 204 2>; + power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi index b973b550eb9d..e65db6ce02bf 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Device Tree file for the AM62P MCU domain peripherals + * Device Tree file for the MCU domain peripherals shared by AM62P and J722S + * * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ @@ -11,7 +12,15 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; + pinctrl-single,gpio-range = + <&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>, + <&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>, + <&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>; bootph-all; + + mcu_pmx_range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; }; mcu_esm: esm@4100000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi index c7486fb2a5b4..c7486fb2a5b4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi index c71d9624ea27..315d0092e736 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Device Tree file for the AM62P wakeup domain peripherals + * Device Tree file for the WAKEUP domain peripherals shared by AM62P and J722S + * * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ @@ -19,6 +20,11 @@ bootph-all; }; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + usb0_phy_ctrl: syscon@4008 { compatible = "ti,am62-usb-phy-ctrl", "syscon"; reg = <0x4008 0x4>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 900d1f9530a2..57383bd2eaeb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -1,666 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Device Tree file for the AM62P main domain peripherals + * Device Tree file for the AM62P MAIN domain peripherals + * * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_main { - oc_sram: sram@70000000 { - compatible = "mmio-sram"; - reg = <0x00 0x70000000 0x00 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x70000000 0x10000>; - }; - - gic500: interrupt-controller@1800000 { - compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01880000 0x00 0xc0000>, /* GICR */ - <0x01 0x00000000 0x00 0x2000>, /* GICC */ - <0x01 0x00010000 0x00 0x1000>, /* GICH */ - <0x01 0x00020000 0x00 0x2000>; /* GICV */ - /* - * vcpumntirq: - * virtual CPU interface maintenance interrupt - */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - - gic_its: msi-controller@1820000 { - compatible = "arm,gic-v3-its"; - reg = <0x00 0x01820000 0x00 0x10000>; - socionext,synquacer-pre-its = <0x1000000 0x400000>; - msi-controller; - #msi-cells = <1>; - }; - }; - - main_conf: bus@100000 { - compatible = "simple-bus"; - reg = <0x00 0x00100000 0x00 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x00100000 0x20000>; - - phy_gmii_sel: phy@4044 { - compatible = "ti,am654-phy-gmii-sel"; - reg = <0x4044 0x8>; - #phy-cells = <1>; - }; - - epwm_tbclk: clock-controller@4130 { - compatible = "ti,am62-epwm-tbclk"; - reg = <0x4130 0x4>; - #clock-cells = <1>; - }; - }; - - dmss: bus@48000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - dma-ranges; - ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; - bootph-all; - - ti,sci-dev-id = <25>; - - secure_proxy_main: mailbox@4d000000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x4d000000 0x00 0x80000>, - <0x00 0x4a600000 0x00 0x80000>, - <0x00 0x4a400000 0x00 0x80000>; - interrupt-names = "rx_012"; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - bootph-all; - }; - - inta_main_dmss: interrupt-controller@48000000 { - compatible = "ti,sci-inta"; - reg = <0x00 0x48000000 0x00 0x100000>; - #interrupt-cells = <0>; - interrupt-controller; - interrupt-parent = <&gic500>; - msi-controller; - ti,sci = <&dmsc>; - ti,sci-dev-id = <28>; - ti,interrupt-ranges = <5 69 35>; - ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; - }; - - main_bcdma: dma-controller@485c0100 { - compatible = "ti,am64-dmss-bcdma"; - reg = <0x00 0x485c0100 0x00 0x100>, - <0x00 0x4c000000 0x00 0x20000>, - <0x00 0x4a820000 0x00 0x20000>, - <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>, - <0x00 0x48600000 0x00 0x8000>, - <0x00 0x484a4000 0x00 0x2000>, - <0x00 0x484c2000 0x00 0x2000>, - <0x00 0x48420000 0x00 0x2000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", - "ring", "tchan", "rchan", "bchan"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <3>; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <26>; - ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ - ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ - ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ - bootph-all; - }; - - main_pktdma: dma-controller@485c0000 { - compatible = "ti,am64-dmss-pktdma"; - reg = <0x00 0x485c0000 0x00 0x100>, - <0x00 0x4a800000 0x00 0x20000>, - <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>, - <0x00 0x485e0000 0x00 0x10000>, - <0x00 0x484a0000 0x00 0x2000>, - <0x00 0x484c0000 0x00 0x2000>, - <0x00 0x48430000 0x00 0x1000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", - "ring", "tchan", "rchan", "rflow"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <2>; - bootph-all; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <30>; - ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ - <0x24>, /* CPSW_TX_CHAN */ - <0x25>, /* SAUL_TX_0_CHAN */ - <0x26>; /* SAUL_TX_1_CHAN */ - ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ - <0x11>, /* RING_CPSW_TX_CHAN */ - <0x12>, /* RING_SAUL_TX_0_CHAN */ - <0x13>; /* RING_SAUL_TX_1_CHAN */ - ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ - <0x2b>, /* CPSW_RX_CHAN */ - <0x2d>, /* SAUL_RX_0_CHAN */ - <0x2f>, /* SAUL_RX_1_CHAN */ - <0x31>, /* SAUL_RX_2_CHAN */ - <0x33>; /* SAUL_RX_3_CHAN */ - ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ - <0x2c>, /* FLOW_CPSW_RX_CHAN */ - <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ - <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ - }; - }; - - dmss_csi: bus@4e000000 { - compatible = "simple-bus"; - ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>; - #address-cells = <2>; - #size-cells = <2>; - dma-ranges; - ti,sci-dev-id = <198>; - - inta_main_dmss_csi: interrupt-controller@4e400000 { - compatible = "ti,sci-inta"; - reg = <0x00 0x4e400000 0x00 0x8000>; - #interrupt-cells = <0>; - interrupt-controller; - interrupt-parent = <&gic500>; - msi-controller; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <200>; - ti,interrupt-ranges = <0 237 8>; - ti,unmapped-event-sources = <&main_bcdma_csi>; - }; - - main_bcdma_csi: dma-controller@4e230000 { - compatible = "ti,am62a-dmss-bcdma-csirx"; - reg = <0x00 0x4e230000 0x00 0x100>, - <0x00 0x4e180000 0x00 0x8000>, - <0x00 0x4e100000 0x00 0x10000>; - reg-names = "gcfg", "rchanrt", "ringrt"; - #dma-cells = <3>; - msi-parent = <&inta_main_dmss_csi>; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <199>; - ti,sci-rm-range-rchan = <0x21>; - }; - }; - - dmsc: system-controller@44043000 { - compatible = "ti,k2g-sci"; - ti,host-id = <12>; - mbox-names = "rx", "tx"; - mboxes = <&secure_proxy_main 12>, - <&secure_proxy_main 13>; - reg-names = "debug_messages"; - reg = <0x00 0x44043000 0x00 0xfe0>; - bootph-all; - - k3_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <2>; - bootph-all; - }; - - k3_clks: clock-controller { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - bootph-all; - }; - - k3_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - bootph-all; - }; - }; - - crypto: crypto@40900000 { - compatible = "ti,am62-sa3ul"; - reg = <0x00 0x40900000 0x00 0x1200>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; - - dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, - <&main_pktdma 0x7507 0>; - dma-names = "tx", "rx1", "rx2"; - }; - - secure_proxy_sa3: mailbox@43600000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x43600000 0x00 0x10000>, - <0x00 0x44880000 0x00 0x20000>, - <0x00 0x44860000 0x00 0x20000>; - /* - * Marked Disabled: - * Node is incomplete as it is meant for bootloaders and - * firmware on non-MPU processors - */ - status = "disabled"; - bootph-all; - }; - - main_pmx0: pinctrl@f4000 { - compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2ac>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - bootph-all; - }; - - main_esm: esm@420000 { - compatible = "ti,j721e-esm"; - reg = <0x00 0x420000 0x00 0x1000>; - ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; - bootph-pre-ram; - }; - - main_timer0: timer@2400000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2400000 0x00 0x400>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 36 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 36 2>; - assigned-clock-parents = <&k3_clks 36 3>; - power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - bootph-all; - }; - - main_timer1: timer@2410000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2410000 0x00 0x400>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 37 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 37 2>; - assigned-clock-parents = <&k3_clks 37 3>; - power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer2: timer@2420000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2420000 0x00 0x400>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 38 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 38 2>; - assigned-clock-parents = <&k3_clks 38 3>; - power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer3: timer@2430000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2430000 0x00 0x400>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 39 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 39 2>; - assigned-clock-parents = <&k3_clks 39 3>; - power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer4: timer@2440000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2440000 0x00 0x400>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 40 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 40 2>; - assigned-clock-parents = <&k3_clks 40 3>; - power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer5: timer@2450000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2450000 0x00 0x400>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 41 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 41 2>; - assigned-clock-parents = <&k3_clks 41 3>; - power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer6: timer@2460000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2460000 0x00 0x400>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 42 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 42 2>; - assigned-clock-parents = <&k3_clks 42 3>; - power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer7: timer@2470000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2470000 0x00 0x400>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 43 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 43 2>; - assigned-clock-parents = <&k3_clks 43 3>; - power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_uart0: serial@2800000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02800000 0x00 0x100>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 146 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart1: serial@2810000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02810000 0x00 0x100>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 152 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart2: serial@2820000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02820000 0x00 0x100>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 153 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart3: serial@2830000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02830000 0x00 0x100>; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 154 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart4: serial@2840000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02840000 0x00 0x100>; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 155 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart5: serial@2850000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02850000 0x00 0x100>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 156 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart6: serial@2860000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02860000 0x00 0x100>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 158 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_i2c0: i2c@20000000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20000000 0x00 0x100>; - interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 102 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c1: i2c@20010000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20010000 0x00 0x100>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 103 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c2: i2c@20020000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20020000 0x00 0x100>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 104 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c3: i2c@20030000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20030000 0x00 0x100>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 105 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_spi0: spi@20100000 { - compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; - reg = <0x00 0x20100000 0x00 0x400>; - interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 141 0>; - status = "disabled"; - }; - - main_spi1: spi@20110000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20110000 0x00 0x400>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 142 0>; - status = "disabled"; - }; - - main_spi2: spi@20120000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20120000 0x00 0x400>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 143 0>; - status = "disabled"; - }; - - main_gpio_intr: interrupt-controller@a00000 { - compatible = "ti,sci-intr"; - reg = <0x00 0x00a00000 0x00 0x800>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <3>; - ti,interrupt-ranges = <0 32 16>; - }; - - main_gpio0: gpio@600000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00600000 0x00 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <190>, <191>, <192>, - <193>, <194>, <195>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <92>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 77 0>; - clock-names = "gpio"; - }; - - main_gpio1: gpio@601000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00601000 0x00 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <180>, <181>, <182>, - <183>, <184>, <185>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <52>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 78 0>; - clock-names = "gpio"; - }; - - sdhci0: mmc@fa10000 { - compatible = "ti,am64-sdhci-8bit"; - reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 57 1>, <&k3_clks 57 2>; - clock-names = "clk_ahb", "clk_xin"; - assigned-clocks = <&k3_clks 57 2>; - assigned-clock-parents = <&k3_clks 57 4>; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - ti,clkbuf-sel = <0x7>; - ti,strobe-sel = <0x77>; - ti,trm-icp = <0x8>; - ti,otap-del-sel-legacy = <0x1>; - ti,otap-del-sel-mmc-hs = <0x1>; - ti,otap-del-sel-ddr52 = <0x6>; - ti,otap-del-sel-hs200 = <0x8>; - ti,otap-del-sel-hs400 = <0x5>; - ti,itap-del-sel-legacy = <0x10>; - ti,itap-del-sel-mmc-hs = <0xa>; - ti,itap-del-sel-ddr52 = <0x3>; - status = "disabled"; - }; - - sdhci1: mmc@fa00000 { - compatible = "ti,am62-sdhci"; - reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; - clock-names = "clk_ahb", "clk_xin"; - bus-width = <4>; - ti,clkbuf-sel = <0x7>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; - status = "disabled"; - }; - - sdhci2: mmc@fa20000 { - compatible = "ti,am62-sdhci"; - reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; - clock-names = "clk_ahb", "clk_xin"; - bus-width = <4>; - ti,clkbuf-sel = <0x7>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; - status = "disabled"; - }; - - usbss0: usb@f900000 { - compatible = "ti,am62-usb"; - reg = <0x00 0x0f900000 0x00 0x800>, - <0x00 0x0f908000 0x00 0x400>; - clocks = <&k3_clks 161 3>; - clock-names = "ref"; - ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>; - #address-cells = <2>; - #size-cells = <2>; - power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; - ranges; - status = "disabled"; - - usb0: usb@31000000 { - compatible = "snps,dwc3"; - reg = <0x00 0x31000000 0x00 0x50000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ - interrupt-names = "host", "peripheral"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,usb2-gadget-lpm-disable; - snps,usb2-lpm-disable; - }; - }; - usbss1: usb@f910000 { compatible = "ti,am62-usb"; reg = <0x00 0x0f910000 0x00 0x800>, @@ -686,408 +31,38 @@ snps,usb2-lpm-disable; }; }; +}; - fss: bus@fc00000 { - compatible = "simple-bus"; - reg = <0x00 0x0fc00000 0x00 0x70000>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ospi0: spi@fc40000 { - compatible = "ti,am654-ospi", "cdns,qspi-nor"; - reg = <0x00 0x0fc40000 0x00 0x100>, - <0x05 0x00000000 0x01 0x00000000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x0>; - clocks = <&k3_clks 75 7>; - assigned-clocks = <&k3_clks 75 7>; - assigned-clock-parents = <&k3_clks 75 8>; - assigned-clock-rates = <166666666>; - power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - - cpsw3g: ethernet@8000000 { - compatible = "ti,am642-cpsw-nuss"; - #address-cells = <2>; - #size-cells = <2>; - reg = <0x00 0x08000000 0x00 0x200000>; - reg-names = "cpsw_nuss"; - ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>; - clocks = <&k3_clks 13 0>; - assigned-clocks = <&k3_clks 13 3>; - assigned-clock-parents = <&k3_clks 13 11>; - clock-names = "fck"; - power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - - dmas = <&main_pktdma 0xc600 15>, - <&main_pktdma 0xc601 15>, - <&main_pktdma 0xc602 15>, - <&main_pktdma 0xc603 15>, - <&main_pktdma 0xc604 15>, - <&main_pktdma 0xc605 15>, - <&main_pktdma 0xc606 15>, - <&main_pktdma 0xc607 15>, - <&main_pktdma 0x4600 15>; - dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", - "tx7", "rx"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - cpsw_port1: port@1 { - reg = <1>; - ti,mac-only; - label = "port1"; - phys = <&phy_gmii_sel 1>; - mac-address = [00 00 00 00 00 00]; - status = "disabled"; - }; - - cpsw_port2: port@2 { - reg = <2>; - ti,mac-only; - label = "port2"; - phys = <&phy_gmii_sel 2>; - mac-address = [00 00 00 00 00 00]; - status = "disabled"; - }; - }; - - cpsw3g_mdio: mdio@f00 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x00 0xf00 0x00 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 13 0>; - clock-names = "fck"; - bus_freq = <1000000>; - status = "disabled"; - }; - - cpts@3d000 { - compatible = "ti,j721e-cpts"; - reg = <0x00 0x3d000 0x00 0x400>; - clocks = <&k3_clks 13 3>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; - }; - }; - - hwspinlock: spinlock@2a000000 { - compatible = "ti,am64-hwspinlock"; - reg = <0x00 0x2a000000 0x00 0x1000>; - #hwlock-cells = <1>; - }; - - mailbox0_cluster0: mailbox@29000000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29000000 0x00 0x200>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster1: mailbox@29010000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29010000 0x00 0x200>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster2: mailbox@29020000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29020000 0x00 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster3: mailbox@29030000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29030000 0x00 0x200>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - ecap0: pwm@23100000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23100000 0x00 0x100>; - power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 51 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap1: pwm@23110000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23110000 0x00 0x100>; - power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 52 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap2: pwm@23120000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23120000 0x00 0x100>; - power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 53 0>; - clock-names = "fck"; - status = "disabled"; - }; - - main_mcan0: can@20701000 { - compatible = "bosch,m_can"; - reg = <0x00 0x20701000 0x00 0x200>, - <0x00 0x20708000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; - clock-names = "hclk", "cclk"; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - main_mcan1: can@20711000 { - compatible = "bosch,m_can"; - reg = <0x00 0x20711000 0x00 0x200>, - <0x00 0x20718000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 99 6>, <&k3_clks 99 1>; - clock-names = "hclk", "cclk"; - interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - main_rti0: watchdog@e000000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e000000 0x00 0x100>; - clocks = <&k3_clks 125 0>; - power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 125 0>; - assigned-clock-parents = <&k3_clks 125 2>; - }; - - main_rti1: watchdog@e010000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e010000 0x00 0x100>; - clocks = <&k3_clks 126 0>; - power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 126 0>; - assigned-clock-parents = <&k3_clks 126 2>; - }; - - main_rti2: watchdog@e020000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e020000 0x00 0x100>; - clocks = <&k3_clks 127 0>; - power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 127 0>; - assigned-clock-parents = <&k3_clks 127 2>; - }; - - main_rti3: watchdog@e030000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e030000 0x00 0x100>; - clocks = <&k3_clks 128 0>; - power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 128 0>; - assigned-clock-parents = <&k3_clks 128 2>; - }; - - main_rti15: watchdog@e0f0000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e0f0000 0x00 0x100>; - clocks = <&k3_clks 130 0>; - power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 130 0>; - assigned-clock-parents = <&k3_clks 130 2>; - }; - - epwm0: pwm@23000000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23000000 0x00 0x100>; - power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm1: pwm@23010000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23010000 0x00 0x100>; - power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm2: pwm@23020000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23020000 0x00 0x100>; - power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - mcasp0: audio-controller@2b00000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b00000 0x00 0x2000>, - <0x00 0x02b08000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 190 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 190 0>; - assigned-clock-parents = <&k3_clks 190 2>; - power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp1: audio-controller@2b10000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b10000 0x00 0x2000>, - <0x00 0x02b18000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 191 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 191 0>; - assigned-clock-parents = <&k3_clks 191 2>; - power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp2: audio-controller@2b20000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b20000 0x00 0x2000>, - <0x00 0x02b28000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 192 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 192 0>; - assigned-clock-parents = <&k3_clks 192 2>; - power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - ti_csi2rx0: ticsi2rx@30102000 { - compatible = "ti,j721e-csi2rx-shim"; - reg = <0x00 0x30102000 0x00 0x1000>; - ranges; - #address-cells = <2>; - #size-cells = <2>; - dmas = <&main_bcdma_csi 0 0x5000 0>; - dma-names = "rx0"; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - - cdns_csi2rx0: csi-bridge@30101000 { - compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; - reg = <0x00 0x30101000 0x00 0x1000>; - clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, - <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; - clock-names = "sys_clk", "p_clk", "pixel_if0_clk", - "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; - phys = <&dphy0>; - phy-names = "dphy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - csi0_port0: port@0 { - reg = <0>; - status = "disabled"; - }; - - csi0_port1: port@1 { - reg = <1>; - status = "disabled"; - }; +&oc_sram { + reg = <0x00 0x70000000 0x00 0x10000>; + ranges = <0x00 0x00 0x70000000 0x10000>; +}; - csi0_port2: port@2 { - reg = <2>; - status = "disabled"; - }; +&inta_main_dmss { + ti,interrupt-ranges = <5 69 35>; +}; - csi0_port3: port@3 { - reg = <3>; - status = "disabled"; - }; +&main_pmx0 { + pinctrl-single,gpio-range = + <&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 33 92 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>; - csi0_port4: port@4 { - reg = <4>; - status = "disabled"; - }; - }; - }; + main_pmx0_range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; }; +}; - dphy0: phy@30110000 { - compatible = "cdns,dphy-rx"; - reg = <0x00 0x30110000 0x00 0x1100>; - #phy-cells = <0>; - power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; +&main_gpio0 { + gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>, + <&main_pmx0 70 72 22>; + ti,ngpio = <92>; +}; - vpu: video-codec@30210000 { - compatible = "ti,j721s2-wave521c", "cnm,wave521c"; - reg = <0x00 0x30210000 0x00 0x10000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 204 2>; - power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>; - }; +&main_gpio1 { + gpio-ranges = <&main_pmx0 0 94 32>, <&main_pmx0 42 137 5>, + <&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>; + ti,ngpio = <52>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi index 94babc412575..75a15c368c11 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi @@ -116,10 +116,13 @@ }; }; - #include "k3-am62p-thermal.dtsi" + #include "k3-am62p-j722s-common-thermal.dtsi" }; /* Now include peripherals for each bus segment */ +#include "k3-am62p-j722s-common-main.dtsi" +#include "k3-am62p-j722s-common-mcu.dtsi" +#include "k3-am62p-j722s-common-wakeup.dtsi" + +/* Include AM62P specific peripherals */ #include "k3-am62p-main.dtsi" -#include "k3-am62p-mcu.dtsi" -#include "k3-am62p-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 6e7234659111..ff65955551a3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -207,7 +207,7 @@ pinctrl-single,pins = < AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */ - AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */ + AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */ AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */ >; }; @@ -364,14 +364,9 @@ self-powered; data-role = "dual"; power-role = "sink"; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - usb_con_hs: endpoint { - remote-endpoint = <&usb0_hs_ep>; - }; + port { + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; }; }; }; @@ -516,11 +511,8 @@ &usb0 { usb-role-switch; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { usb0_hs_ep: endpoint { remote-endpoint = <&usb_con_hs>; }; @@ -549,8 +541,6 @@ 0 0 0 0 0 0 0 0 >; - tx-num-evt = <32>; - rx-num-evt = <32>; }; &fss { diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi new file mode 100644 index 000000000000..e4633af87eb9 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi @@ -0,0 +1,475 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + aliases { + serial2 = &main_uart0; + serial3 = &main_uart1; + mmc1 = &sdhci1; + usb0 = &usb0; + usb1 = &usb1; + ethernet1 = &cpsw_port2; + }; + + can_tc1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <8000000>; + standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Lyra"; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "External Speaker", "SPOP", + "External Speaker", "SPOM"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp2>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&audio_refclk1>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; + + led-1 { + gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + led-2 { + gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_mmc: regulator-vcc-3v3-mmc { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + + gpio_keys_pins_default: gpio-keys-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ + >; + }; + + gpio_exp_int_pins_default: gpio-exp-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; + + hdmi_int_pins_default: hdmi-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ + >; + }; + + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ + AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ + >; + }; + + main_mcasp2_pins_default: main-mcasp2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */ + AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */ + AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */ + AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ + >; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ + >; + }; + + main_usb1_pins_default: main-usb1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + user_leds_pins_default: user-leds-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy3>; +}; + +&cpsw3g_mdio { + cpsw3g_phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <3>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VP2: DPI/HDMI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <100000>; + status = "okay"; + + audio_codec: audio-codec@18 { + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; + + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&vcc_3v3_sw>; + IOVDD-supply = <&vcc_3v3_sw>; + DRVDD-supply = <&vcc_3v3_sw>; + DVDD-supply = <&vcc_1v8>; + }; + + gpio_exp: gpio-expander@21 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp_int_pins_default>; + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupt-parent = <&main_gpio1>; + interrupts = <49 0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = "", "GPIO1_CAN0_nEN", + "GPIO2_LED2", "GPIO3_LVDS_GPIO", + "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", + "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; + }; + + usb-pd@22 { + compatible = "ti,tps6598x"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + port { + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + }; + }; + + sii9022: bridge-hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + + interrupt-parent = <&main_gpio0>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_int_pins_default>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x51>; + }; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc1>; + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + /* Main UART1 may be used by TIFS firmware */ + status = "okay"; +}; + +&mcasp2 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp2_pins_default>; + + /* MCASP_IIS_MODE */ + op-mode = <0>; + tdm-slots = <2>; + + /* 0: INACTIVE, 1: TX, 2: RX */ + serial-dir = < + 0 0 1 2 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; + status = "okay"; +}; + +&sdhci1 { + vmmc-supply = <&vcc_3v3_mmc>; + vqmmc-supply = <&vddshv5_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + no-1-8-v; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + usb-role-switch; + + port { + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 3c45782ab2b7..44ff67b6bf1e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -48,6 +48,14 @@ pmsg-size = <0x8000>; }; + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x8000000>; + linux,cma-default; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; @@ -128,6 +136,10 @@ }; }; +&phy_gmii_sel { + bootph-all; +}; + &main_pmx0 { /* First pad number is ALW package and second is AMC package */ main_uart0_pins_default: main-uart0-default-pins { @@ -156,6 +168,7 @@ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ @@ -335,15 +348,9 @@ self-powered; data-role = "dual"; power-role = "sink"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - usb_con_hs: endpoint { - remote-endpoint = <&usb0_hs_ep>; - }; + port { + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; }; }; }; @@ -470,12 +477,9 @@ &usb0 { bootph-all; - #address-cells = <1>; - #size-cells = <0>; usb-role-switch; - port@0 { - reg = <0>; + port { usb0_hs_ep: endpoint { remote-endpoint = <&usb_con_hs>; }; @@ -504,8 +508,6 @@ 0 0 0 0 0 0 0 0 >; - tx-num-evt = <32>; - rx-num-evt = <32>; }; &dss { diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 6f9aa5e02138..f8370dd03350 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -1283,6 +1283,9 @@ <0x22400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-pru0_0-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <16 2 2>; + interrupt-names = "vring"; }; rtu0_0: rtu@4000 { @@ -1292,6 +1295,9 @@ <0x23400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-rtu0_0-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <20 4 4>; + interrupt-names = "vring"; }; tx_pru0_0: txpru@a000 { @@ -1310,6 +1316,9 @@ <0x24400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-pru0_1-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <18 3 3>; + interrupt-names = "vring"; }; rtu0_1: rtu@6000 { @@ -1319,6 +1328,9 @@ <0x23c00 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-rtu0_1-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <22 5 5>; + interrupt-names = "vring"; }; tx_pru0_1: txpru@c000 { @@ -1436,6 +1448,9 @@ <0x22400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-pru1_0-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <16 2 2>; + interrupt-names = "vring"; }; rtu1_0: rtu@4000 { @@ -1445,6 +1460,9 @@ <0x23400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-rtu1_0-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <20 4 4>; + interrupt-names = "vring"; }; tx_pru1_0: txpru@a000 { @@ -1463,6 +1481,9 @@ <0x24400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-pru1_1-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <18 3 3>; + interrupt-names = "vring"; }; rtu1_1: rtu@6000 { @@ -1472,6 +1493,9 @@ <0x23c00 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am64x-rtu1_1-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <22 5 5>; + interrupt-names = "vring"; }; tx_pru1_1: txpru@c000 { diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 125e507966fb..ea7c58fb67e2 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -265,6 +265,50 @@ interrupts = <70 IRQ_TYPE_EDGE_FALLING>; wakeup-source; }; + + pmic@61 { + compatible = "ti,lp8733"; + reg = <0x61>; + + buck0-in-supply = <&vcc_5v0_som>; + buck1-in-supply = <&vcc_5v0_som>; + ldo0-in-supply = <&vdd_3v3>; + ldo1-in-supply = <&vdd_3v3>; + + regulators { + vdd_core: buck0 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_ldo0: ldo0 { + regulator-name = "VDD_1V8_LDO0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdda_1v8: ldo1 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; &main_r5fss0_core0 { @@ -296,7 +340,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; - flash@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso index 79ed19c6c0e9..c4525024ba5d 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso +++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso index 32596a84b7ba..82f8a21b6cbf 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso +++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* - * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso new file mode 100644 index 000000000000..423d6027278d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac-mii.dtso @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT overlay for enabling both ICSSG1 port on AM642 EVM in MII mode + * + * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/icssg1-eth/ethernet-ports/port@1"; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mdio_mux>; + mdio-parent-bus = <&icssg1_mdio>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + icssg1_phy2: ethernet-phy@3 { + reg = <3>; + }; + }; + }; +}; + +&main_pmx0 { + icssg1_mii1_pins_default: icssg1-mii1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x00f8, PIN_INPUT, 1) /* (V9) PRG1_PRU0_GPO16.PR1_MII_MT0_CLK */ + AM64X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (Y9) PRG1_PRU0_GPO15.PR1_MII0_TXEN */ + AM64X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (AA9) PRG1_PRU0_GPO14.PR1_MII0_TXD3 */ + AM64X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (W9) PRG1_PRU0_GPO13.PR1_MII0_TXD2 */ + AM64X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (U9) PRG1_PRU0_GPO12.PR1_MII0_TXD1 */ + AM64X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA8) PRG1_PRU0_GPO11.PR1_MII0_TXD0 */ + AM64X_IOPAD(0x00c8, PIN_INPUT, 1) /* (Y8) PRG1_PRU0_GPO4.PR1_MII0_RXDV */ + AM64X_IOPAD(0x00d0, PIN_INPUT, 1) /* (AA7) PRG1_PRU0_GPO6.PR1_MII_MR0_CLK */ + AM64X_IOPAD(0x00c4, PIN_INPUT, 1) /* (V8) PRG1_PRU0_GPO3.PR1_MII0_RXD3 */ + AM64X_IOPAD(0x00c0, PIN_INPUT, 1) /* (W8) PRG1_PRU0_GPO2.PR1_MII0_RXD2 */ + AM64X_IOPAD(0x00cc, PIN_INPUT, 1) /* (V13) PRG1_PRU0_GPO5.PR1_MII0_RXER */ + AM64X_IOPAD(0x00bc, PIN_INPUT, 1) /* (U8) PRG1_PRU0_GPO1.PR1_MII0_RXD1 */ + AM64X_IOPAD(0x00b8, PIN_INPUT, 1) /* (Y7) PRG1_PRU0_GPO0.PR1_MII0_RXD0 */ + AM64X_IOPAD(0x00d8, PIN_INPUT, 1) /* (W13) PRG1_PRU0_GPO8.PR1_MII0_RXLINK */ + >; + }; + + icssg1_mii2_pins_default: icssg1-mii2-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0148, PIN_INPUT, 1) /* (Y10) PRG1_PRU1_GPO16.PR1_MII_MT1_CLK */ + AM64X_IOPAD(0x0144, PIN_OUTPUT, 0) /* (Y11) PRG1_PRU1_GPO15.PR1_MII1_TXEN */ + AM64X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AA11) PRG1_PRU1_GPO14.PR1_MII1_TXD3 */ + AM64X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (U10) PRG1_PRU1_GPO13.PR1_MII1_TXD2 */ + AM64X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (V10) PRG1_PRU1_GPO12.PR1_MII1_TXD1 */ + AM64X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AA10) PRG1_PRU1_GPO11.PR1_MII1_TXD0 */ + AM64X_IOPAD(0x0118, PIN_INPUT, 1) /* (W12) PRG1_PRU1_GPO4.PR1_MII1_RXDV */ + AM64X_IOPAD(0x0120, PIN_INPUT, 1) /* (U11) PRG1_PRU1_GPO6.PR1_MII_MR1_CLK */ + AM64X_IOPAD(0x0114, PIN_INPUT, 1) /* (Y12) PRG1_PRU1_GPO3.PR1_MII1_RXD3 */ + AM64X_IOPAD(0x0110, PIN_INPUT, 1) /* (AA12) PRG1_PRU1_GPO2.PR1_MII1_RXD2 */ + AM64X_IOPAD(0x011c, PIN_INPUT, 1) /* (AA13) PRG1_PRU1_GPO5.PR1_MII1_RXER */ + AM64X_IOPAD(0x010c, PIN_INPUT, 1) /* (V11) PRG1_PRU1_GPO1.PR1_MII1_RXD1 */ + AM64X_IOPAD(0x0108, PIN_INPUT, 1) /* (W11) PRG1_PRU1_GPO0.PR1_MII1_RXD0 */ + AM64X_IOPAD(0x0128, PIN_INPUT, 1) /* (U12) PRG1_PRU1_GPO8.PR1_MII1_RXLINK */ + >; + }; +}; + +&cpsw3g { + pinctrl-0 = <&rgmii1_pins_default>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&mdio_mux_1 { + status = "disabled"; +}; + +&icssg1_eth { + pinctrl-0 = <&icssg1_mii1_pins_default &icssg1_mii2_pins_default>; +}; + +&icssg1_emac0 { + phy-mode = "mii"; +}; + +&icssg1_emac1 { + status = "okay"; + phy-handle = <&icssg1_phy2>; + phy-mode = "mii"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso new file mode 100644 index 000000000000..f08c0e272b53 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT overlay for HSE NAND expansion card on AM642 EVM + * + * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "k3-pinctrl.h" + +&main_pmx0 { + gpmc0_pins_default: gpmc0-pins-default { + bootph-all; + pinctrl-single,pins = < + AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */ + AM64X_IOPAD(0x003c, PIN_INPUT, 0) /* (T20) GPMC0_AD0 */ + AM64X_IOPAD(0x0040, PIN_INPUT, 0) /* (U21) GPMC0_AD1 */ + AM64X_IOPAD(0x0064, PIN_INPUT, 0) /* (R16) GPMC0_AD10 */ + AM64X_IOPAD(0x0068, PIN_INPUT, 0) /* (W20) GPMC0_AD11 */ + AM64X_IOPAD(0x006c, PIN_INPUT, 0) /* (W21) GPMC0_AD12 */ + AM64X_IOPAD(0x0070, PIN_INPUT, 0) /* (V18) GPMC0_AD13 */ + AM64X_IOPAD(0x0074, PIN_INPUT, 0) /* (Y21) GPMC0_AD14 */ + AM64X_IOPAD(0x0078, PIN_INPUT, 0) /* (Y20) GPMC0_AD15 */ + AM64X_IOPAD(0x0044, PIN_INPUT, 0) /* (T18) GPMC0_AD2 */ + AM64X_IOPAD(0x0048, PIN_INPUT, 0) /* (U20) GPMC0_AD3 */ + AM64X_IOPAD(0x004c, PIN_INPUT, 0) /* (U18) GPMC0_AD4 */ + AM64X_IOPAD(0x0050, PIN_INPUT, 0) /* (U19) GPMC0_AD5 */ + AM64X_IOPAD(0x0054, PIN_INPUT, 0) /* (V20) GPMC0_AD6 */ + AM64X_IOPAD(0x0058, PIN_INPUT, 0) /* (V21) GPMC0_AD7 */ + AM64X_IOPAD(0x005c, PIN_INPUT, 0) /* (V19) GPMC0_AD8 */ + AM64X_IOPAD(0x0060, PIN_INPUT, 0) /* (T17) GPMC0_AD9 */ + AM64X_IOPAD(0x0098, PIN_INPUT_PULLUP, 0) /* (W19) GPMC0_WAIT0 */ + AM64X_IOPAD(0x009c, PIN_INPUT_PULLUP, 0) /* (Y18) GPMC0_WAIT1 */ + AM64X_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (R19) GPMC0_CSn0 */ + AM64X_IOPAD(0x00ac, PIN_OUTPUT_PULLUP, 0) /* (R20) GPMC0_CSn1 */ + AM64X_IOPAD(0x00b0, PIN_OUTPUT_PULLUP, 0) /* (P19) GPMC0_CSn2 */ + AM64X_IOPAD(0x00b4, PIN_OUTPUT_PULLUP, 0) /* (R21) GPMC0_CSn3 */ + AM64X_IOPAD(0x007c, PIN_OUTPUT, 0) /* (R17) GPMC0_CLK */ + AM64X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (P16) GPMC0_ADVn_ALE */ + AM64X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (R18) GPMC0_OEn_REn */ + AM64X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (T21) GPMC0_WEn */ + AM64X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (P17) GPMC0_BE0n_CLE */ + AM64X_IOPAD(0x00a0, PIN_OUTPUT_PULLUP, 0) /* (N16) GPMC0_WPn */ + AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */ + >; + }; +}; + +&main_gpio0 { + gpio0-36 { + bootph-all; + gpio-hog; + gpios = <36 0>; + input; + line-name = "GPMC0_MUX_DIR"; + }; +}; + +&elm0 { + bootph-all; + status = "okay"; +}; + +&gpmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gpmc0_pins_default>; + #address-cells = <2>; + #size-cells = <1>; + + nand@0,0 { + compatible = "ti,am64-nand"; + reg = <0 0 64>; /* device IO registers */ + interrupt-parent = <&gpmc0>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-polled"; + ti,nand-ecc-opt = "bch8"; /* BCH8: Bootrom limitation */ + ti,elm-id = <&elm0>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <25>; + gpmc,adv-wr-off-ns = <25>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <3>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + bootph-all; + label = "NAND.tiboot3"; + reg = <0x00000000 0x00200000>; /* 2M */ + }; + partition@200000 { + bootph-all; + label = "NAND.tispl"; + reg = <0x00200000 0x00200000>; /* 2M */ + }; + partition@400000 { + bootph-all; + label = "NAND.tiboot3.backup"; /* 2M */ + reg = <0x00400000 0x00200000>; /* BootROM looks at 4M */ + }; + partition@600000 { + bootph-all; + label = "NAND.u-boot"; + reg = <0x00600000 0x00400000>; /* 4M */ + }; + partition@a00000 { + bootph-all; + label = "NAND.u-boot-env"; + reg = <0x00a00000 0x00040000>; /* 256K */ + }; + partition@a40000 { + bootph-all; + label = "NAND.u-boot-env.backup"; + reg = <0x00a40000 0x00040000>; /* 256K */ + }; + partition@a80000 { + bootph-all; + label = "NAND.file-system"; + reg = <0x00a80000 0x3f580000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index e20e4ffd0f1f..6bb1ad2e56ec 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -466,6 +466,12 @@ AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ >; }; + + icssg1_iep0_pins_default: icssg1-iep0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0104, PIN_OUTPUT, 2) /* (W7) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */ + >; + }; }; &main_uart0 { @@ -817,3 +823,12 @@ rx-internal-delay-ps = <2000>; }; }; + +&gpmc0 { + ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ +}; + +&icssg1_iep0 { + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_iep0_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts index 234d76e4e944..5b5e9eeec5ac 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts @@ -282,7 +282,6 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart3_default_pins>; uart-has-rtscts; - rs485-rts-active-low; linux,rs485-enabled-at-boot-time; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso new file mode 100644 index 000000000000..7a5ce4bc02f3 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * DT overlay for PCIe support (limits USB to 2.0/high-speed) + * + * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com + * Author: Matt McKee <mmckee@phytec.com> + * + * Copyright (C) 2024 PHYTEC America, LLC - https://www.phytec.com + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-cadence.h> + +#include "k3-pinctrl.h" +#include "k3-serdes.h" + +&{/} { + pcie_refclk0: pcie-refclk0 { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_usb_sel_pins_default>; + clocks = <&serdes_refclk>; + #clock-cells = <0>; + enable-gpios = <&main_gpio1 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&main_pmx0 { + pcie_usb_sel_pins_default: pcie-usb-sel-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ + >; + }; + + pcie_pins_default: pcie-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ + >; + }; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins_default>; + reset-gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_usb_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "okay"; +}; + +&serdes0_pcie_usb_link { + cdns,phy-type = <PHY_TYPE_PCIE>; +}; + +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_PCIE0>; +}; + +&serdes0 { + assigned-clock-parents = <&pcie_refclk0>, <&pcie_refclk0>, <&pcie_refclk0>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +/* + * Assign pcie_refclk0 to serdes_wiz0 as ext_ref_clk. + * This makes sure that the clock generator gets enabled at the right time. + */ +&serdes_wiz0 { + clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&pcie_refclk0>; +}; + +&usbss0 { + ti,usb2-only; +}; + +&usb0 { + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 6df331ccb970..30729b49dd69 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -190,18 +190,6 @@ >; }; - pcie_usb_sel_pins_default: pcie-usb-sel-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ - >; - }; - - pcie0_pins_default: pcie0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ - >; - }; - user_leds_pins_default: user-leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 5b028b3a3192..44ecbcf1c844 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -430,6 +430,18 @@ #gpio-cells = <2>; gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; }; + + /* SoC power supply temperature */ + tmp100@48 { + compatible = "ti,tmp100"; + reg = <0x48>; + }; + + /* DDR power supply temperature */ + tmp100@49 { + compatible = "ti,tmp100"; + reg = <0x49>; + }; }; /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index 1f4dc5ad1696..c40ad67cee01 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi index 6c785eff7d2f..828d815d6bdf 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi @@ -1,7 +1,7 @@ -// SPDX-License-Identifier: GPL-2.0-only +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. */ #include "k3-am642.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index ed71561c5bd9..1af3dedde1f6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -1185,6 +1185,9 @@ <0x22400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru0_0-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <16 2 2>; + interrupt-names = "vring"; }; rtu0_0: rtu@4000 { @@ -1194,6 +1197,9 @@ <0x23400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu0_0-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <20 4 4>; + interrupt-names = "vring"; }; tx_pru0_0: txpru@a000 { @@ -1212,6 +1218,9 @@ <0x24400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru0_1-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <18 3 3>; + interrupt-names = "vring"; }; rtu0_1: rtu@6000 { @@ -1221,6 +1230,9 @@ <0x23c00 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu0_1-fw"; + interrupt-parent = <&icssg0_intc>; + interrupts = <22 5 5>; + interrupt-names = "vring"; }; tx_pru0_1: txpru@c000 { @@ -1339,6 +1351,9 @@ <0x22400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru1_0-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <16 2 2>; + interrupt-names = "vring"; }; rtu1_0: rtu@4000 { @@ -1348,6 +1363,9 @@ <0x23400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu1_0-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <20 4 4>; + interrupt-names = "vring"; }; tx_pru1_0: txpru@a000 { @@ -1366,6 +1384,9 @@ <0x24400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru1_1-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <18 3 3>; + interrupt-names = "vring"; }; rtu1_1: rtu@6000 { @@ -1375,6 +1396,9 @@ <0x23c00 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu1_1-fw"; + interrupt-parent = <&icssg1_intc>; + interrupts = <22 5 5>; + interrupt-names = "vring"; }; tx_pru1_1: txpru@c000 { @@ -1493,6 +1517,9 @@ <0x22400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru2_0-fw"; + interrupt-parent = <&icssg2_intc>; + interrupts = <16 2 2>; + interrupt-names = "vring"; }; rtu2_0: rtu@4000 { @@ -1502,6 +1529,9 @@ <0x23400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu2_0-fw"; + interrupt-parent = <&icssg2_intc>; + interrupts = <20 4 4>; + interrupt-names = "vring"; }; tx_pru2_0: txpru@a000 { @@ -1520,6 +1550,9 @@ <0x24400 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-pru2_1-fw"; + interrupt-parent = <&icssg2_intc>; + interrupts = <18 3 3>; + interrupt-names = "vring"; }; rtu2_1: rtu@6000 { @@ -1529,6 +1562,9 @@ <0x23c00 0x100>; reg-names = "iram", "control", "debug"; firmware-name = "am65x-rtu2_1-fw"; + interrupt-parent = <&icssg2_intc>; + interrupts = <22 5 5>; + interrupt-names = "vring"; }; tx_pru2_1: txpru@c000 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 8feab9317644..43c6118d2bf0 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -6,13 +6,17 @@ */ &cbass_mcu { - mcu_conf: scm-conf@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; + mcu_conf: bus@40f00000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40f00000 0x20000>; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + phy_gmii_sel: phy@4040 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4040 0x4>; @@ -358,7 +362,7 @@ reg = <1>; ti,mac-only; label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; phys = <&phy_gmii_sel 1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index aba0c52b1213..aa7139cc8a92 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -33,6 +33,7 @@ memory@80000000 { device_type = "memory"; + bootph-all; /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index d743f023cdd9..90dbe31c5b81 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -414,6 +414,82 @@ pinctrl-0 = <&wkup_uart0_pins_default>; }; +&wkup_i2c0 { + bootph-all; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + status = "okay"; + + lp8733: pmic@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + + lp8733_regulators: regulators { + lp8733_buck0_reg: buck0 { + /* FB_B0 -> LP8733-BUCK1 - VDD_MCU_0V85 */ + regulator-name = "lp8733-buck0"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_buck1_reg: buck1 { + /* FB_B1 -> LP8733-BUCK2 - VDD_DDR_1V1 */ + regulator-name = "lp8733-buck1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_ldo0_reg: ldo0 { + /* LDO0 -> LP8733-LDO1 - VDA_DLL_0V8 */ + regulator-name = "lp8733-ldo0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo1_reg: ldo1 { + /* LDO1 -> LP8733-LDO2 - VDA_LN_1V8 */ + regulator-name = "lp8733-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &mcu_uart0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi index 0f4a5da0ebc4..5c66e0ec6e82 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -11,9 +11,10 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 16 GB RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x03 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000003 0x80000000>; }; reserved_memory: reserved-memory { @@ -130,6 +131,25 @@ }; }; +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins { + bootph-all; + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + >; + }; +}; + &wkup_pmx2 { wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < @@ -152,6 +172,68 @@ }; }; +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + bootph-all; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + bootph-pre-ram; + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index d88651c297a2..3f655852244e 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -35,8 +35,8 @@ device_type = "memory"; bootph-all; /* 32G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x07 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000007 0x80000000>; }; reserved_memory: reserved-memory { @@ -814,6 +814,27 @@ }; }; }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; }; &wkup_gpio0 { @@ -1203,3 +1224,65 @@ }; }; }; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, + <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>, + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <3>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>; + }; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&serdes1 { + status = "okay"; + + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>, <&serdes_wiz1 3>, <&serdes_wiz1 4>; + }; +}; + +&pcie0_rc { + status = "okay"; + reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; +}; + +&pcie1_rc { + status = "okay"; + reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie3_rc { + status = "okay"; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso new file mode 100644 index 000000000000..356c82bbe143 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 PHYTEC America, LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + * + * Copyright (C) 2024 PHYTEC America, LLC + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +&cpsw3g_phy1 { + status = "disabled"; +}; + +&cpsw_port1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso new file mode 100644 index 000000000000..8b24191f5948 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 PHYTEC America, LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + * + * Copyright (C) 2024 PHYTEC America, LLC + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +&i2c_som_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso new file mode 100644 index 000000000000..cc0cf269b6e4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2023 PHYTEC America, LLC + * Author: Garrett Giordano <ggiordano@phytec.com> + * + * Copyright (C) 2024 PHYTEC America, LLC + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +&serial_flash { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso new file mode 100644 index 000000000000..969dfebcd637 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2024 PHYTEC America LLC + * Author: Nathan Morrisson <nmorrisson@phytec.com> + */ + +/dts-v1/; +/plugin/; + +#include "k3-pinctrl.h" + +&serial_flash { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index fccaabfb1348..5097d192c2b2 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -164,12 +164,16 @@ ti,timer-pwm; }; - mcu_conf: syscon@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x00 0x40f00000 0x00 0x20000>; + mcu_conf: bus@40f00000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0x40f00000 0x20000>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; phy_gmii_sel: phy@4040 { compatible = "ti,am654-phy-gmii-sel"; @@ -420,7 +424,7 @@ reg = <1>; ti,mac-only; label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; phys = <&phy_gmii_sel 1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 7e6a584ac6f0..21fe194a5766 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -12,9 +12,10 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 4G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x00 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; }; reserved_memory: reserved-memory { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso new file mode 100644 index 000000000000..65a7e54f0884 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Infotainment Expansion Board for j721e-evm + * User Guide: <https://www.ti.com/lit/ug/spruit0a/spruit0a.pdf> + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "k3-pinctrl.h" + +&{/} { + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + ddc-i2c-bus = <&main_i2c1>; + digital; + /* P12 - HDMI_HPD */ + hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + dvi-bridge { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tfp410"; + /* P10 - HDMI_PDn */ + powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi_out0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = + <&hdmi_connector_in>; + }; + }; + }; +}; + +&main_pmx0 { + main_i2c1_exp6_pins_default: main-i2c1-exp6-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x264, PIN_INPUT, 7) /* (T29) MMC2_DAT2.GPIO1_24 */ + >; + }; + + dss_vout0_pins_default: dss-vout0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ + J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ + J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ + J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ + J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ + J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ + J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ + J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ + J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ + J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ + J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ + J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ + J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ + J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ + J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ + J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ + J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ + J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ + J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ + J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ + J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ + J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ + J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ + J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ + J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ + J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ + J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ + J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ + >; + }; +}; + +&exp1 { + p14-hog { + /* P14 - VINOUT_MUX_SEL0 */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "VINOUT_MUX_SEL0"; + }; + + p15-hog { + /* P15 - VINOUT_MUX_SEL1 */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "VINOUT_MUX_SEL1"; + }; +}; + +&main_i2c1 { + /* i2c1 is used for DVI DDC, so we need to use 100kHz */ + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + + exp6: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_exp6_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + p11-hog { + /* P11 - HDMI_DDC_OE */ + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "HDMI_DDC_OE"; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout0_pins_default>; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dpi_out0: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 9349ae07c046..6b6ef6a30614 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -34,13 +34,17 @@ }; }; - mcu_conf: syscon@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; + mcu_conf: bus@40f00000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40f00000 0x20000>; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + phy_gmii_sel: phy@4040 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4040 0x4>; @@ -546,7 +550,7 @@ reg = <1>; ti,mac-only; label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; phys = <&phy_gmii_sel 1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 0c4575ad8d7c..89fbfb21e5d3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -31,6 +31,7 @@ memory@80000000 { device_type = "memory"; + bootph-all; /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; @@ -210,6 +211,42 @@ <3300000 0x1>; }; + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_gpio_pins_default>; + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_gpio_pins_default>; + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_gpio_pins_default>; + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; + }; + dp_pwr_3v3: fixedregulator-dp-prw { compatible = "regulator-fixed"; regulator-name = "dp-pwr"; @@ -367,6 +404,45 @@ >; }; + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ + >; + }; + + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ + >; + }; + + main_mcan5_pins_default: main-mcan5-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ + >; + }; + + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ + >; + }; + + main_mcan9_pins_default: main-mcan9-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ + >; + }; + + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ @@ -555,6 +631,19 @@ >; }; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ + >; + }; + /* Reset for M.2 M Key slot on PCIe1 */ mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = < @@ -1108,6 +1197,34 @@ num-lanes = <2>; }; +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +&main_mcan9 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + &ufs_wrapper { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 1fae6495db07..5ba947771b84 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -12,6 +12,7 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 5ccb04c7c462..8feb42c89e47 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -139,13 +139,17 @@ ti,interrupt-ranges = <16 960 16>; }; - mcu_conf: syscon@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; + mcu_conf: bus@40f00000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40f00000 0x20000>; + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; + phy_gmii_sel: phy@4040 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4040 0x4>; @@ -544,7 +548,7 @@ reg = <1>; ti,mac-only; label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; phys = <&phy_gmii_sel 1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 623c8421525d..82aacc01e8fe 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -13,9 +13,10 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 16 GB RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x03 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000003 0x80000000>; }; /* Reserving memory regions still pending */ diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index bf3c246d13d1..dd3b5f7039d7 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -9,7 +9,9 @@ /dts-v1/; #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> #include "k3-j722s.dtsi" +#include "k3-serdes.h" / { compatible = "ti,j722s-evm", "ti,j722s"; @@ -105,6 +107,15 @@ <3300000 0x1>; }; + vsys_io_3v3: regulator-vsys-io-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + vsys_io_1v8: regulator-vsys-io-1v8 { compatible = "regulator-fixed"; regulator-name = "vsys_io_1v8"; @@ -122,6 +133,35 @@ regulator-always-on; regulator-boot-on; }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "J722S-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&audio_refclk1>; + }; + }; }; &main_pmx0 { @@ -202,6 +242,27 @@ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ >; }; + + main_usb1_pins_default: main-usb1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */ + >; + }; + + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */ + J722S_IOPAD(0x008c, PIN_OUTPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */ + J722S_IOPAD(0x0084, PIN_INPUT, 2) /* (N21) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; }; &cpsw3g { @@ -277,6 +338,12 @@ bootph-all; }; +&k3_clks { + /* Configure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -301,6 +368,48 @@ "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#", "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN", "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ"; + + p05-hog { + /* P05 - USB2.0_MUX_SEL */ + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-high; + }; + + p01_hog: p01-hog { + /* P01 - TRC_MUX_SEL */ + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "TRC_MUX_SEL"; + }; + + p02_hog: p02-hog { + /* P02 - MCASP1_FET_SEL */ + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP1_FET_SEL"; + }; + + p13_hog: p13-hog { + /* P13 - GPIO_AUD_RSTn */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "GPIO_AUD_RSTn"; + }; + }; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + AVDD-supply = <&vsys_io_3v3>; + IOVDD-supply = <&vsys_io_3v3>; + DRVDD-supply = <&vsys_io_3v3>; + DVDD-supply = <&vsys_io_1v8>; }; }; @@ -384,3 +493,76 @@ status = "okay"; bootph-all; }; + +&serdes_ln_ctrl { + idle-states = <J722S_SERDES0_LANE0_USB>, + <J722S_SERDES1_LANE0_PCIE0_LANE0>; +}; + +&serdes0 { + status = "okay"; + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes1 { + status = "okay"; + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>; + }; +}; + +&pcie0_rc { + reset-gpios = <&exp1 18 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; + ti,vbus-divider; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi new file mode 100644 index 000000000000..c797980528ec --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree file for the J722S MAIN domain peripherals + * + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy-ti.h> + +/ { + serdes_refclk: clk-0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; + +&cbass_main { + serdes_wiz0: phy@f000000 { + compatible = "ti,am64-wiz-10g"; + ranges = <0x0f000000 0x0 0x0f000000 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 279 0>, <&k3_clks 279 1>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <1>; + #reset-cells = <1>; + #clock-cells = <1>; + + assigned-clocks = <&k3_clks 279 1>; + assigned-clock-parents = <&k3_clks 279 5>; + + serdes0: serdes@f000000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x0f000000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 279 1>, + <&k3_clks 279 1>, + <&k3_clks 279 1>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + status = "disabled"; /* Needs lane config */ + }; + }; + + serdes_wiz1: phy@f010000 { + compatible = "ti,am64-wiz-10g"; + ranges = <0x0f010000 0x0 0x0f010000 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 280 0>, <&k3_clks 280 1>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <1>; + #reset-cells = <1>; + #clock-cells = <1>; + + assigned-clocks = <&k3_clks 280 1>; + assigned-clock-parents = <&k3_clks 280 5>; + + serdes1: serdes@f010000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x0f010000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz1 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz1 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 280 1>, + <&k3_clks 280 1>, + <&k3_clks 280 1>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + status = "disabled"; /* Needs lane config */ + }; + }; + + pcie0_rc: pcie@f102000 { + compatible = "ti,j722s-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x0f102000 0x00 0x1000>, + <0x00 0x0f100000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x68000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>, + <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + max-link-speed = <3>; + num-lanes = <1>; + power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 259 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb010>; + cdns,no-bar-match-nbits = <64>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + status = "disabled"; + }; + + usbss1: usb@f920000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x0f920000 0x00 0x100>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 3>, <&k3_clks 278 1>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb1: usb@31200000{ + compatible = "cdns,usb3"; + reg = <0x00 0x31200000 0x00 0x10000>, + <0x00 0x31210000 0x00 0x10000>, + <0x00 0x31220000 0x00 0x10000>; + reg-names = "otg", + "xhci", + "dev"; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; +}; + +&main_conf { + serdes_ln_ctrl: mux-controller@4080 { + compatible = "reg-mux"; + reg = <0x4080 0x14>; + #mux-control-cells = <1>; + mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */ + <0x10 0x3>; /* SERDES1 lane0 select */ + }; + + audio_refclk1: clock@82e4 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e4 0x4>; + clocks = <&k3_clks 157 18>; + assigned-clocks = <&k3_clks 157 18>; + assigned-clock-parents = <&k3_clks 157 33>; + #clock-cells = <0>; + }; +}; + +&wkup_conf { + pcie0_ctrl: pcie0-ctrl@4070 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4070 0x4>; + }; +}; + +&oc_sram { + reg = <0x00 0x70000000 0x00 0x40000>; + ranges = <0x00 0x00 0x70000000 0x40000>; +}; + +&inta_main_dmss { + ti,interrupt-ranges = <7 71 21>; +}; + +&main_pmx0 { + pinctrl-single,gpio-range = + <&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 33 55 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>, + <&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>; + + main_pmx0_range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; +}; + +&main_gpio0 { + gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>, + <&main_pmx0 70 72 17>; + ti,ngpio = <87>; +}; + +&main_gpio1 { + gpio-ranges = <&main_pmx0 7 101 25>, <&main_pmx0 42 137 5>, + <&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>; + ti,ngpio = <73>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi index c75744edb143..14c6c6a332ef 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi @@ -10,11 +10,133 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> -#include "k3-am62p5.dtsi" +#include "k3-pinctrl.h" / { model = "Texas Instruments K3 J722S SoC"; compatible = "ti,j722s"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 135 0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 136 0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 137 0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 138 0>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; cbass_main: bus@f0000 { compatible = "simple-bus"; @@ -74,16 +196,39 @@ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; - }; -}; -/* Main domain overrides */ + cbass_mcu: bus@4000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */ + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ + bootph-all; + }; -&inta_main_dmss { - ti,interrupt-ranges = <7 71 21>; -}; + cbass_wakeup: bus@b00000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ + bootph-all; + }; + }; -&oc_sram { - reg = <0x00 0x70000000 0x00 0x40000>; - ranges = <0x00 0x00 0x70000000 0x40000>; + #include "k3-am62p-j722s-common-thermal.dtsi" }; + +/* Include peripherals shared with AM62P */ +#include "k3-am62p-j722s-common-main.dtsi" +#include "k3-am62p-j722s-common-mcu.dtsi" +#include "k3-am62p-j722s-common-wakeup.dtsi" + +/* Include J722S specific peripherals */ +#include "k3-j722s-main.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso new file mode 100644 index 000000000000..685305092bd8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/** + * DT Overlay for enabling PCIE0 and PCIE1 instances in Endpoint Configuration + * on J784S4 EVM. + * + * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/* + * Since Root Complex and Endpoint modes are mutually exclusive + * disable Root Complex mode. + */ +&pcie0_rc { + status = "disabled"; +}; + +&pcie1_rc { + status = "disabled"; +}; + +&cbass_main { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + pcie0_ep: pcie-ep@2900000 { + compatible = "ti,j784s4-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 332 0>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes1_pcie0_link>; + phy-names = "pcie-phy"; + }; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j784s4-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 333 0>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes0_pcie1_link>; + phy-names = "pcie-phy"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso new file mode 100644 index 000000000000..dcd2c7c39ec3 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/** + * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with + * J784S4 EVM. The Add-On Ethernet Card has to be connected to ENET Expansion 1 slot on the + * board. + * + * Product Datasheet: https://www.ti.com/lit/ug/spruj74/spruj74.pdf + * + * Link to QSGMII Daughtercard: https://www.ti.com/tool/J721EXENETXPANEVM + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> + +#include "k3-pinctrl.h" +#include "k3-serdes.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@5"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@6"; + ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@7"; + ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@8"; + ethernet5 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1"; + }; +}; + +&main_cpsw0 { + status = "okay"; +}; + +&main_cpsw0_port5 { + phy-handle = <&cpsw9g_phy1>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 5>, <&serdes2_qsgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; +}; + +&main_cpsw0_port6 { + phy-handle = <&cpsw9g_phy2>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 6>, <&serdes2_qsgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; +}; + +&main_cpsw0_port7 { + phy-handle = <&cpsw9g_phy0>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 7>, <&serdes2_qsgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; +}; + +&main_cpsw0_port8 { + phy-handle = <&cpsw9g_phy3>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_qsgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; +}; + +&main_cpsw0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_default_pins>; + bus_freq = <1000000>; + reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <120000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + cpsw9g_phy0: ethernet-phy@16 { + reg = <16>; + }; + cpsw9g_phy1: ethernet-phy@17 { + reg = <17>; + }; + cpsw9g_phy2: ethernet-phy@18 { + reg = <18>; + }; + cpsw9g_phy3: ethernet-phy@19 { + reg = <19>; + }; +}; + +&exp2 { + /* Power-up ENET1 EXPANDER PHY. */ + qsgmii-line-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + }; + + /* Toggle MUX2 for MDIO lines */ + mux-sel-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>, <14 GPIO_ACTIVE_HIGH>, <15 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&main_pmx0 { + mdio0_default_pins: mdio0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x05c, PIN_INPUT, 4) /* (AC36) MCASP2_AXR0.MDIO1_MDIO */ + J784S4_IOPAD(0x058, PIN_INPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC */ + >; + }; +}; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, + <J784S4_SERDES0_LANE2_IP3_UNUSED>, <J784S4_SERDES0_LANE3_USB>, + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>, + <J784S4_SERDES2_LANE0_QSGMII_LANE5>, <J784S4_SERDES2_LANE1_QSGMII_LANE6>, + <J784S4_SERDES2_LANE2_QSGMII_LANE7>, <J784S4_SERDES2_LANE3_QSGMII_LANE8>; +}; + +&serdes_wiz2 { + status = "okay"; +}; + +&serdes2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + serdes2_qsgmii_link: phy@0 { + reg = <2>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_QSGMII>; + resets = <&serdes_wiz2 3>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso new file mode 100644 index 000000000000..d5f8c8531923 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/** + * DT Overlay for CPSW9G in dual port fixed-link USXGMII mode using ENET-1 + * and ENET-2 Expansion slots of J784S4 EVM. + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> + +#include "k3-serdes.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2"; + ethernet3 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1"; + }; +}; + +&main_cpsw0 { + pinctrl-names = "default"; + status = "okay"; +}; + +&main_cpsw0_port1 { + phy-mode = "usxgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 1>, <&serdes2_usxgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; + fixed-link { + speed = <5000>; + full-duplex; + }; +}; + +&main_cpsw0_port2 { + phy-mode = "usxgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 2>, <&serdes2_usxgmii_link>; + phy-names = "mac", "serdes"; + status = "okay"; + fixed-link { + speed = <5000>; + full-duplex; + }; +}; + +&serdes_wiz2 { + assigned-clock-parents = <&k3_clks 406 9>; /* Use 156.25 MHz clock for USXGMII */ + status = "okay"; +}; + +&serdes2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + serdes2_usxgmii_link: phy@2 { + reg = <2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USXGMII>; + resets = <&serdes_wiz2 3>, <&serdes_wiz2 4>; + }; +}; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, + <J784S4_SERDES0_LANE2_IP3_UNUSED>, <J784S4_SERDES0_LANE3_USB>, + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>, + <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>, + <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index d511b25d62e3..9338d987180d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -27,14 +27,16 @@ mmc1 = &main_sdhci1; i2c0 = &wkup_i2c0; i2c3 = &main_i2c0; + ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw1_port1; }; memory@80000000 { device_type = "memory"; bootph-all; /* 32G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x07 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000007 0x80000000>; }; reserved_memory: reserved-memory { @@ -272,6 +274,59 @@ }; }; }; + + transceiver0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + /* standby pin has been grounded by default */ + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + mux-states = <&mux1 1>; + }; + + mux1: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>; + idle-state = <1>; + }; + + codec_audio: sound { + compatible = "ti,j7200-cpb-audio"; + model = "j784s4-cpb"; + + ti,cpb-mcasp = <&mcasp0>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 265 0>, <&k3_clks 265 1>, + <&k3_clks 157 34>, <&k3_clks 157 63>; + clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000", + "cpb-codec-scki", "cpb-codec-scki-48000"; + }; }; &wkup_gpio0 { @@ -280,6 +335,30 @@ &main_pmx0 { bootph-all; + main_cpsw2g_default_pins: main-cpsw2g-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */ + J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */ + J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */ + J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */ + J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */ + J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */ + J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */ + J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */ + J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */ + J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */ + J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ + J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + main_uart8_pins_default: main-uart8-default-pins { bootph-all; pinctrl-single,pins = < @@ -336,6 +415,49 @@ J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */ >; }; + + main_mcan4_pins_default: main-mcan4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */ + J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */ + >; + }; + + main_usbss0_pins_default: main-usbss0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ + >; + }; + + main_i2c3_pins_default: main-i2c3-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */ + J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */ + >; + }; + + main_mcasp0_pins_default: main-mcasp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */ + J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */ + J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */ + J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ + >; + }; }; &wkup_pmx2 { @@ -415,6 +537,32 @@ J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ >; }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */ + >; + }; + + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ + >; + }; }; &wkup_pmx1 { @@ -579,6 +727,27 @@ }; }; }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1330000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; }; &mcu_uart0 { @@ -748,6 +917,14 @@ "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; + + p12-hog { + /* P12 - AUDIO_MUX_SEL */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "AUDIO_MUX_SEL"; + }; }; exp2: gpio@22 { @@ -763,6 +940,22 @@ "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", "USER_INPUT1", "USER_LED1", "USER_LED2"; + + p13-hog { + /* P13 - CANUART_MUX_SEL0 */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX_SEL0"; + }; + + p15-hog { + /* P15 - CANUART_MUX1_SEL1 */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX1_SEL1"; + }; }; }; @@ -832,6 +1025,31 @@ phy-handle = <&mcu_phy0>; }; +&main_cpsw1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_default_pins>; + status = "okay"; +}; + +&main_cpsw1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_mdio_default_pins>; + status = "okay"; + + main_cpsw1_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&main_cpsw1_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&main_cpsw1_phy0>; + status = "okay"; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; @@ -1041,6 +1259,40 @@ <&k3_clks 218 22>; }; +&serdes0 { + status = "okay"; + + serdes0_usb_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + &serdes_wiz4 { status = "okay"; }; @@ -1105,3 +1357,130 @@ }; }; }; + +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver0>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver1>; +}; + +&main_mcan16 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan4_pins_default>; + phys = <&transceiver3>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie1_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, + <&serdes_wiz0 3>, <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&pcie1_rc { + status = "okay"; + num-lanes = <2>; + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie1_link>; + phy-names = "pcie-phy"; +}; + +&serdes1 { + status = "okay"; + + serdes1_pcie0_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&pcie0_rc { + status = "okay"; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie0_link>; + phy-names = "pcie-phy"; +}; + +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + +&main_i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + #sound-dai-cells = <1>; + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + clocks = <&audio_refclk1>; + clock-names = "scki"; + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; +}; + +&mcasp0 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp0_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 1 + 2 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index 6a4554c6c9c1..f170f80f00c1 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -48,6 +48,39 @@ #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x1c000>; + cpsw1_phy_gmii_sel: phy@4034 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4034 0x4>; + #phy-cells = <1>; + }; + + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j784s4-cpsw9g-phy-gmii-sel"; + reg = <0x4044 0x20>; + #phy-cells = <1>; + ti,qsgmii-main-ports = <7>, <7>; + }; + + pcie0_ctrl: pcie0-ctrl@4070 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4070 0x4>; + }; + + pcie1_ctrl: pcie1-ctrl@4074 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4074 0x4>; + }; + + pcie2_ctrl: pcie2-ctrl@4078 { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x4078 0x4>; + }; + + pcie3_ctrl: pcie3-ctrl@407c { + compatible = "ti,j784s4-pcie-ctrl", "syscon"; + reg = <0x407c 0x4>; + }; + serdes_ln_ctrl: mux-controller@4080 { compatible = "reg-mux"; reg = <0x00004080 0x30>; @@ -75,6 +108,88 @@ <J784S4_SERDES4_LANE2_EDP_LANE2>, <J784S4_SERDES4_LANE3_EDP_LANE3>; }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "reg-mux"; + reg = <0x4000 0x4>; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 3 mux */ + }; + + ehrpwm_tbclk: clock-controller@4140 { + compatible = "ti,am654-ehrpwm-tbclk"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; + + audio_refclk1: clock@82e4 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e4 0x4>; + clocks = <&k3_clks 157 34>; + assigned-clocks = <&k3_clks 157 34>; + assigned-clock-parents = <&k3_clks 157 63>; + #clock-cells = <0>; + }; + }; + + main_ehrpwm0: pwm@3000000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3000000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 0>, <&k3_clks 219 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + main_ehrpwm1: pwm@3010000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3010000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 1>, <&k3_clks 220 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + main_ehrpwm2: pwm@3020000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3020000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 2>, <&k3_clks 221 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + main_ehrpwm3: pwm@3030000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3030000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 3>, <&k3_clks 222 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + main_ehrpwm4: pwm@3040000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3040000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 4>, <&k3_clks 223 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + main_ehrpwm5: pwm@3050000 { + compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x3050000 0x00 0x100>; + clocks = <&ehrpwm_tbclk 5>, <&k3_clks 224 0>; + clock-names = "tbclk", "fck"; + power-domains = <&k3_pds 224 TI_SCI_PD_EXCLUSIVE>; + #pwm-cells = <3>; + status = "disabled"; }; gic500: interrupt-controller@1800000 { @@ -568,6 +683,38 @@ status = "disabled"; }; + usbss0: usb@4104000 { + bootph-all; + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 398 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 398 21>, <&k3_clks 398 2>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 398 21>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 398 22>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; /* Needs lane config */ + + usb0: usb@6000000 { + bootph-all; + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + }; + }; + main_i2c0: i2c@2000000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; reg = <0x00 0x02000000 0x00 0x100>; @@ -907,6 +1054,122 @@ status = "disabled"; }; + pcie0_rc: pcie@2900000 { + compatible = "ti,j784s4-pcie-host"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 332 0>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb012>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>, + <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + status = "disabled"; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j784s4-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 333 0>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb012>; + msi-map = <0x0 &gic_its 0x10000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + status = "disabled"; + }; + + pcie2_rc: pcie@2920000 { + compatible = "ti,j784s4-pcie-host"; + reg = <0x00 0x02920000 0x00 0x1000>, + <0x00 0x02927000 0x00 0x400>, + <0x00 0x0e000000 0x00 0x00800000>, + <0x44 0x00000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 334 0>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb012>; + msi-map = <0x0 &gic_its 0x20000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>, + <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + status = "disabled"; + }; + + pcie3_rc: pcie@2930000 { + compatible = "ti,j784s4-pcie-host"; + reg = <0x00 0x02930000 0x00 0x1000>, + <0x00 0x02937000 0x00 0x400>, + <0x00 0x0e800000 0x00 0x00800000>, + <0x44 0x10000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 335 0>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb012>; + msi-map = <0x0 &gic_its 0x30000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>, + <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + status = "disabled"; + }; + serdes_wiz0: wiz@5060000 { compatible = "ti,j784s4-wiz-10g"; #address-cells = <1>; @@ -1427,6 +1690,180 @@ }; }; + main_cpsw0: ethernet@c000000 { + compatible = "ti,j784s4-cpswxg-nuss"; + reg = <0x00 0xc000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + clocks = <&k3_clks 64 0>; + clock-names = "fck"; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + main_cpsw0_port1: port@1 { + reg = <1>; + label = "port1"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port2: port@2 { + reg = <2>; + label = "port2"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port3: port@3 { + reg = <3>; + label = "port3"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port4: port@4 { + reg = <4>; + label = "port4"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port5: port@5 { + reg = <5>; + label = "port5"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port6: port@6 { + reg = <6>; + label = "port6"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port7: port@7 { + reg = <7>; + label = "port7"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port8: port@8 { + reg = <8>; + label = "port8"; + ti,mac-only; + status = "disabled"; + }; + }; + + main_cpsw0_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 64 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 64 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + main_cpsw1: ethernet@c200000 { + compatible = "ti,j721e-cpsw-nuss"; + reg = <0x00 0xc200000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xc640>, + <&main_udmap 0xc641>, + <&main_udmap 0xc642>, + <&main_udmap 0xc643>, + <&main_udmap 0xc644>, + <&main_udmap 0xc645>, + <&main_udmap 0xc646>, + <&main_udmap 0xc647>, + <&main_udmap 0x4640>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + main_cpsw1_port1: port@1 { + reg = <1>; + label = "port1"; + phys = <&cpsw1_phy_gmii_sel 1>; + ti,mac-only; + status = "disabled"; + }; + }; + + main_cpsw1_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 62 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, @@ -2255,4 +2692,94 @@ */ }; }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 265 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 265 0>; + assigned-clock-parents = <&k3_clks 265 1>; + power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 266 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 266 0>; + assigned-clock-parents = <&k3_clks 266 1>; + power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 267 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 267 0>; + assigned-clock-parents = <&k3_clks 267 1>; + power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp3: mcasp@2b30000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b30000 0x00 0x2000>, + <0x00 0x02b38000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 268 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 268 0>; + assigned-clock-parents = <&k3_clks 268 1>; + power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp4: mcasp@2b40000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b40000 0x00 0x2000>, + <0x00 0x02b48000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 269 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 269 0>; + assigned-clock-parents = <&k3_clks 269 1>; + power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 2e18d91ae92f..f3a6ed1c979d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -145,12 +145,16 @@ status = "reserved"; }; - mcu_conf: syscon@40f00000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00 0x40f00000 0x00 0x20000>; + mcu_conf: bus@40f00000 { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0x40f00000 0x20000>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + cpsw_mac_syscon: ethernet-mac-syscon@200 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x200 0x8>; + }; phy_gmii_sel: phy@4040 { compatible = "ti,am654-phy-gmii-sel"; @@ -553,7 +557,7 @@ reg = <1>; ti,mac-only; label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; + ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; phys = <&phy_gmii_sel 1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index da7368ed6b52..73cc3c1fec08 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -238,7 +238,10 @@ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */ <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */ - <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIe0 Core*/ + <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe1 Core*/ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00800000>, /* PCIe2 Core*/ + <0x00 0x0e800000 0x00 0x0e800000 0x00 0x00800000>, /* PCIe3 Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */ @@ -248,7 +251,12 @@ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ + <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */ <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ + <0x42 0x00000000 0x42 0x00000000 0x01 0x00000000>, /* PCIe2 DAT1 */ + <0x43 0x00000000 0x43 0x00000000 0x01 0x00000000>, /* PCIe3 DAT1 */ + <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT0 */ + <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT0 */ <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ /* MCUSS_WKUP Range */ diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index 4cd2df467d0b..22b8d73cfd32 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -38,6 +38,9 @@ #define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT) +/* Default mux configuration for gpio-ranges to use with pinctrl */ +#define PIN_GPIO_RANGE_IOPAD (PIN_INPUT | 7) + #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h index a011ad893b44..ef3606068140 100644 --- a/arch/arm64/boot/dts/ti/k3-serdes.h +++ b/arch/arm64/boot/dts/ti/k3-serdes.h @@ -201,4 +201,12 @@ #define J784S4_SERDES4_LANE3_USB 0x2 #define J784S4_SERDES4_LANE3_IP4_UNUSED 0x3 +/* J722S */ + +#define J722S_SERDES0_LANE0_USB 0x0 +#define J722S_SERDES0_LANE0_QSGMII_LANE2 0x1 + +#define J722S_SERDES1_LANE0_PCIE0_LANE0 0x0 +#define J722S_SERDES1_LANE0_QSGMII_LANE1 0x1 + #endif /* DTS_ARM64_TI_K3_SERDES_H */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index dd4569e7bd95..60d1b1acf9a0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -70,6 +70,22 @@ clocks = <&zynqmp_clk ACPU>; }; +&cpu0_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu1_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu2_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu3_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + &fpd_dma_chan1 { clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index d7535a77b45e..95d16904d765 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -22,6 +22,17 @@ /plugin/; &{/} { + compatible = "xlnx,zynqmp-sk-kv260-revA", + "xlnx,zynqmp-sk-kv260-revY", + "xlnx,zynqmp-sk-kv260-revZ", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revA"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; @@ -68,7 +79,12 @@ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - /* u14 - 0x40 - ina260 */ + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ }; @@ -321,6 +337,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; conf-cd { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index a7b8fffad499..a74d0ac7e07a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -17,6 +17,17 @@ /plugin/; &{/} { + compatible = "xlnx,zynqmp-sk-kv260-rev2", + "xlnx,zynqmp-sk-kv260-rev1", + "xlnx,zynqmp-sk-kv260-revB", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revB"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; @@ -52,6 +63,18 @@ #clock-cells = <0>; clock-frequency = <27000000>; }; + + dpcon { + compatible = "dp-connector"; + label = "P11"; + type = "full-size"; + + port { + dpcon_in: endpoint { + remote-endpoint = <&dpsub_dp_out>; + }; + }; + }; }; &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ @@ -63,8 +86,13 @@ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - /* u14 - 0x40 - ina260 */ - /* u43 - 0x2d - usb5744 */ + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + /* u43 - 0x2d - USB hub */ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ }; @@ -81,6 +109,14 @@ phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; assigned-clock-rates = <27000000>, <25000000>, <300000000>; + + ports { + port@5 { + dpsub_dp_out: endpoint { + remote-endpoint = <&dpcon_in>; + }; + }; + }; }; &zynqmp_dpdma { @@ -305,6 +341,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; conf-cd { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index 51622896b1b1..86e6c4990560 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * dts file for Xilinx ZynqMP SM-K26 rev1/B/A + * dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A * * (C) Copyright 2020 - 2021, Xilinx, Inc. + * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc. * * Michal Simek <michal.simek@amd.com> */ @@ -17,8 +18,9 @@ #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { - model = "ZynqMP SM-K26 Rev1/B/A"; - compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", + model = "ZynqMP SM-K26 Rev2/1/B/A"; + compatible = "xlnx,zynqmp-sm-k26-rev2", + "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26", "xlnx,zynqmp"; @@ -101,12 +103,23 @@ <&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>, <&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>; }; + + pwm-fan { + compatible = "pwm-fan"; + status = "okay"; + pwms = <&ttc0 2 40000 0>; + }; }; &modepin_gpio { label = "modepin"; }; +&ttc0 { + status = "okay"; + #pwm-cells = <3>; +}; + &uart1 { /* MIO36/MIO37 */ status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts index 85b0d1677240..b804abe89d1d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A + * dts file for Xilinx ZynqMP SMK-K26 rev2/1/B/A * * (C) Copyright 2020 - 2021, Xilinx, Inc. + * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc. * * Michal Simek <michal.simek@amd.com> */ @@ -10,8 +11,9 @@ #include "zynqmp-sm-k26-revA.dts" / { - model = "ZynqMP SMK-K26 Rev1/B/A"; - compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB", + model = "ZynqMP SMK-K26 Rev2/1/B/A"; + compatible = "xlnx,zynqmp-smk-k26-rev2", + "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB", "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26", "xlnx,zynqmp"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts index c8f71a1aec89..495ca94b45db 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -14,6 +14,14 @@ compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; }; +&rproc_split { + status = "okay"; +}; + +&rproc_lockstep { + status = "disabled"; +}; + &eeprom { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index d99830c9b85f..b1b31dcf6291 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -207,13 +207,71 @@ mbox-names = "tx", "rx"; }; - nvmem-firmware { + soc-nvmem { compatible = "xlnx,zynqmp-nvmem-fw"; - #address-cells = <1>; - #size-cells = <1>; - - soc_revision: soc-revision@0 { - reg = <0x0 0x4>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + /* efuse access */ + efuse_dna: efuse-dna@c { + reg = <0xc 0xc>; + }; + efuse_usr0: efuse-usr0@20 { + reg = <0x20 0x4>; + }; + efuse_usr1: efuse-usr1@24 { + reg = <0x24 0x4>; + }; + efuse_usr2: efuse-usr2@28 { + reg = <0x28 0x4>; + }; + efuse_usr3: efuse-usr3@2c { + reg = <0x2c 0x4>; + }; + efuse_usr4: efuse-usr4@30 { + reg = <0x30 0x4>; + }; + efuse_usr5: efuse-usr5@34 { + reg = <0x34 0x4>; + }; + efuse_usr6: efuse-usr6@38 { + reg = <0x38 0x4>; + }; + efuse_usr7: efuse-usr7@3c { + reg = <0x3c 0x4>; + }; + efuse_miscusr: efuse-miscusr@40 { + reg = <0x40 0x4>; + }; + efuse_chash: efuse-chash@50 { + reg = <0x50 0x4>; + }; + efuse_pufmisc: efuse-pufmisc@54 { + reg = <0x54 0x4>; + }; + efuse_sec: efuse-sec@58 { + reg = <0x58 0x4>; + }; + efuse_spkid: efuse-spkid@5c { + reg = <0x5c 0x4>; + }; + efuse_aeskey: efuse-aeskey@60 { + reg = <0x60 0x20>; + }; + efuse_ppk0hash: efuse-ppk0hash@a0 { + reg = <0xa0 0x30>; + }; + efuse_ppk1hash: efuse-ppk1hash@d0 { + reg = <0xd0 0x30>; + }; + efuse_pufuser: efuse-pufuser@100 { + reg = <0x100 0x7F>; + }; }; }; @@ -252,7 +310,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - fpga_full: fpga-full { + fpga_full: fpga-region { compatible = "fpga-region"; fpga-mgr = <&zynqmp_pcap>; #address-cells = <2>; @@ -260,19 +318,76 @@ ranges; }; - remoteproc { + rproc_lockstep: remoteproc@ffe00000 { compatible = "xlnx,zynqmp-r5fss"; xlnx,cluster-mode = <1>; + xlnx,tcm-mode = <1>; + + #address-cells = <2>; + #size-cells = <2>; - r5f-0 { + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>, + <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>; + + r5f@0 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_0>; + reg = <0x0 0x0 0x0 0x10000>, + <0x0 0x20000 0x0 0x10000>, + <0x0 0x10000 0x0 0x10000>, + <0x0 0x30000 0x0 0x10000>; + reg-names = "atcm0", "btcm0", "atcm1", "btcm1"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; memory-region = <&rproc_0_fw_image>; }; - r5f-1 { + r5f@1 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_1>; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; + memory-region = <&rproc_1_fw_image>; + }; + }; + + rproc_split: remoteproc-split@ffe00000 { + status = "disabled"; + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <0>; + xlnx,tcm-mode = <0>; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>, + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; + + r5f@0 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>; + memory-region = <&rproc_0_fw_image>; + }; + + r5f@1 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; memory-region = <&rproc_1_fw_image>; }; }; @@ -330,6 +445,34 @@ }; }; + cpu0_debug: debug@fec10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfec10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; + + cpu1_debug: debug@fed10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfed10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + }; + + cpu2_debug: debug@fee10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfee10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + }; + + cpu3_debug: debug@fef10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfef10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + }; + /* GDMA */ fpd_dma_chan1: dma-controller@fd500000 { status = "disabled"; @@ -684,6 +827,13 @@ power-domains = <&zynqmp_firmware PD_I2C_1>; }; + ocm: memory-controller@ff960000 { + compatible = "xlnx,zynqmp-ocmc-1.0"; + reg = <0x0 0xff960000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + pcie: pcie@fd0e0000 { compatible = "xlnx,nwl-pcie-2.11"; status = "disabled"; @@ -941,10 +1091,11 @@ status = "disabled"; reg = <0x0 0xfe200000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupt-names = "host", "peripheral", "otg"; + interrupt-names = "host", "peripheral", "otg", "wakeup"; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ref"; /* iommus = <&smmu 0x860>; */ snps,quirk-frame-length-adjustment = <0x20>; @@ -972,10 +1123,11 @@ status = "disabled"; reg = <0x0 0xfe300000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupt-names = "host", "peripheral", "otg"; + interrupt-names = "host", "peripheral", "otg", "wakeup"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ref"; /* iommus = <&smmu 0x861>; */ snps,quirk-frame-length-adjustment = <0x20>; @@ -1024,8 +1176,6 @@ compatible = "xlnx,zynqmp-ams-pl"; status = "disabled"; reg = <0x400 0x400>; - #address-cells = <1>; - #size-cells = <0>; }; }; diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile index 87f70b1af6b4..1c91be38ea16 100644 --- a/arch/riscv/boot/dts/allwinner/Makefile +++ b/arch/riscv/boot/dts/allwinner/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-clockworkpi-v3.14.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-devterm-v3.14.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts new file mode 100644 index 000000000000..750aec6cf2f2 --- /dev/null +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Samuel Holland <samuel@sholland.org> + +#include <dt-bindings/gpio/gpio.h> + +/dts-v1/; + +#include "sun20i-d1.dtsi" +#include "sun20i-common-regulators.dtsi" + +/ { + model = "ClockworkPi v3.14 (R-01)"; + compatible = "clockwork,r-01-clockworkpi-v3.14", "allwinner,sun20i-d1"; + + aliases { + ethernet0 = &ap6256; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* + * This regulator is PWM-controlled, but the PWM controller is not + * yet supported, so fix the regulator to its default voltage. + */ + reg_vdd_cpu: vdd-cpu { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <®_vcc>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11/GPIO3 */ + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpu>; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pb10_pins>; + pinctrl-names = "default"; + status = "okay"; + + axp221: pmic@34 { + compatible = "x-powers,axp228", "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <4 9 IRQ_TYPE_LEVEL_LOW>; /* PE9/GPIO2 */ + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp221-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp221-adc"; + #io-channel-cells = <1>; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp221-battery-power-supply"; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp221-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + regulators { + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + regulator-name = "sys-3v3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "sys-1v8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_aldo1: aldo1 { + regulator-name = "aud-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_aldo2: aldo2 { + regulator-name = "disp-3v3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_aldo3: aldo3 { + regulator-name = "vdd-wifi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* DLDO1 and ELDO1-3 are connected in parallel. */ + reg_dldo1: dldo1 { + regulator-name = "vbat-wifi-a"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* DLDO2-DLDO4 are connected in parallel. */ + reg_dldo2: dldo2 { + regulator-name = "vcc-3v3-ext-a"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_dldo3: dldo3 { + regulator-name = "vcc-3v3-ext-b"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_dldo4: dldo4 { + regulator-name = "vcc-3v3-ext-c"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_eldo1: eldo1 { + regulator-name = "vbat-wifi-b"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_eldo2: eldo2 { + regulator-name = "vbat-wifi-c"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_eldo3: eldo3 { + regulator-name = "vbat-wifi-d"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp221-usb-power-supply"; + status = "disabled"; + }; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_vcc_3v3>; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo3>; + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + status = "okay"; + + ap6256: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10/GPIO4 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pg-supply = <®_ldoa>; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb8_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + uart-has-rtscts; + pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + interrupt-parent = <&pio>; + interrupts = <6 17 IRQ_TYPE_LEVEL_HIGH>; /* PG17/GPIO6 */ + device-wakeup-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16/GPIO7 */ + shutdown-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18/GPIO5 */ + max-speed = <1500000>; + vbat-supply = <®_dldo1>; + vddio-supply = <®_aldo3>; + }; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb0_vbus_power-supply = <&ac_power_supply>; + usb1_vbus-supply = <®_vcc>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts new file mode 100644 index 000000000000..bc5c84f22762 --- /dev/null +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Samuel Holland <samuel@sholland.org> + +#include "sun20i-d1-clockworkpi-v3.14.dts" + +/ { + model = "Clockwork DevTerm (R-01)"; + compatible = "clockwork,r-01-devterm-v3.14", + "clockwork,r-01-clockworkpi-v3.14", + "allwinner,sun20i-d1"; + + fan { + compatible = "gpio-fan"; + gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10/GPIO41 */ + gpio-fan,speed-map = <0 0>, + <6000 1>; + #cooling-cells = <2>; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */ + scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */ + #address-cells = <1>; + #size-cells = <0>; + + adc@54 { + compatible = "ti,adc101c"; + reg = <0x54>; + interrupt-parent = <&pio>; + interrupts = <4 12 IRQ_TYPE_LEVEL_LOW>; /* PE12/GPIO35 */ + vref-supply = <®_dldo2>; + #io-channel-cells = <1>; + }; + }; +}; diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 5a9d7f5a75b4..e4175adb028d 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -396,6 +396,17 @@ ranges; #address-cells = <1>; #size-cells = <1>; + + regulators@3000150 { + compatible = "allwinner,sun20i-d1-system-ldos"; + reg = <0x3000150 0x4>; + + reg_ldoa: ldoa { + }; + + reg_ldob: ldob { + }; + }; }; dma: dma-controller@3002000 { diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index e177815bf1a2..f51aeeb9fd3b 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi new file mode 100644 index 000000000000..e153eaf9b90e --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + fabric-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */ + <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */ + <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */ + <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */ + <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */ + + cape_gpios_p8: gpio@41100000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x41100000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <16>; + gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34", + "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38", + "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42", + "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46"; + }; + + cape_gpios_p9: gpio@41200000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x41200000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <20>; + gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14", + "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18", + "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24", + "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28", + "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42"; + }; + + hsi_gpios: gpio@44000000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x44000000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <20>; + gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N", + "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P", + "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID", + "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID", + "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID", + "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK", + "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N"; + }; + }; + + refclk_ccc: cccrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; + +&ccc_nw { + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts new file mode 100644 index 000000000000..47cf693beb68 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "mpfs.dtsi" +#include "mpfs-beaglev-fire-fabric.dtsi" + +/* Clock frequency (in Hz) of MTIMER */ +#define MTIMER_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "BeagleBoard BeagleV-Fire"; + compatible = "beagle,beaglev-fire", "microchip,mpfs"; + + aliases { + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <MTIMER_FREQ>; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + status = "okay"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss: hss-buffer@103fc00000 { + compatible = "shared-dma-pool"; + reg = <0x10 0x3fc00000 0x0 0x400000>; + no-map; + }; + }; + + imx219_clk: camera-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + imx219_vana: fixedregulator-0 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vana"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + imx219_vdig: fixedregulator-1 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vdig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + imx219_vddl: fixedregulator-2 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vddl"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + ngpios=<32>; + gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2", + "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5", + "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8", + "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11", + "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20", + "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26", + "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1", + "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET"; + status = "okay"; + + vio-enable-hog { + gpio-hog; + gpios = <30 30>; + output-high; + line-name = "VIO_ENABLE"; + }; + + sd-det-hog { + gpio-hog; + gpios = <31 31>; + input; + line-name = "SD_DET"; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; +}; + +&mac0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart0 { + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + microchip,bitstream-flash = <&sys_ctrl_flash>; + status = "okay"; +}; + +&syscontroller_qspi { + status = "okay"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts index 49b4b9c2c101..80cb017974d8 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts +++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts @@ -14,6 +14,18 @@ }; }; +&cgi_main { + clock-frequency = <25000000>; +}; + +&cgi_dpll0 { + clock-frequency = <25000000>; +}; + +&cgi_dpll1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi index 81fda312f988..34c802bd3f9b 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi @@ -4,8 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/clock/sophgo,sg2042-clkgen.h> +#include <dt-bindings/clock/sophgo,sg2042-pll.h> +#include <dt-bindings/clock/sophgo,sg2042-rpgate.h> #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/reset/sophgo,sg2042-reset.h> #include "sg2042-cpus.dtsi" @@ -20,12 +22,60 @@ serial0 = &uart0; }; + cgi_main: oscillator0 { + compatible = "fixed-clock"; + clock-output-names = "cgi_main"; + #clock-cells = <0>; + }; + + cgi_dpll0: oscillator1 { + compatible = "fixed-clock"; + clock-output-names = "cgi_dpll0"; + #clock-cells = <0>; + }; + + cgi_dpll1: oscillator2 { + compatible = "fixed-clock"; + clock-output-names = "cgi_dpll1"; + #clock-cells = <0>; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; + pllclk: clock-controller@70300100c0 { + compatible = "sophgo,sg2042-pll"; + reg = <0x70 0x300100c0 0x0 0x40>; + clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>; + clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1"; + #clock-cells = <1>; + }; + + rpgate: clock-controller@7030010368 { + compatible = "sophgo,sg2042-rpgate"; + reg = <0x70 0x30010368 0x0 0x98>; + clocks = <&clkgen GATE_CLK_RP_CPU_NORMAL>; + clock-names = "rpgate"; + #clock-cells = <1>; + }; + + clkgen: clock-controller@7030012000 { + compatible = "sophgo,sg2042-clkgen"; + reg = <0x70 0x30012000 0x0 0x1000>; + clocks = <&pllclk MPLL_CLK>, + <&pllclk FPLL_CLK>, + <&pllclk DPLL0_CLK>, + <&pllclk DPLL1_CLK>; + clock-names = "mpll", + "fpll", + "dpll0", + "dpll1"; + #clock-cells = <1>; + }; + clint_mswi: interrupt-controller@7094000000 { compatible = "sophgo,sg2042-aclint-mswi", "thead,c900-aclint-mswi"; reg = <0x00000070 0x94000000 0x00000000 0x00004000>; @@ -341,6 +391,9 @@ interrupt-parent = <&intc>; interrupts = <112 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; + clocks = <&clkgen GATE_CLK_UART_500M>, + <&clkgen GATE_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; resets = <&rstgen RST_UART0>; diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 2fa0cd7f31c3..7a163a7d6ba3 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -9,5 +9,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 68d16717db8c..ca2d44d59d48 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -294,6 +294,20 @@ status = "okay"; }; +&pcie0 { + perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; + phys = <&pciephy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>; +}; + +&pcie1 { + perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; + phys = <&pciephy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; +}; + &pwmdac { pinctrl-names = "default"; pinctrl-0 = <&pwmdac_pins>; @@ -321,16 +335,13 @@ #size-cells = <1>; spl@0 { - reg = <0x0 0x80000>; + reg = <0x0 0xf0000>; }; uboot-env@f0000 { reg = <0xf0000 0x10000>; }; uboot@100000 { - reg = <0x100000 0x400000>; - }; - reserved-data@600000 { - reg = <0x600000 0xa00000>; + reg = <0x100000 0xf00000>; }; }; }; @@ -476,6 +487,54 @@ }; }; + pcie0_pins: pcie0-0 { + clkreq-pins { + pinmux = <GPIOMUX(27, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(32, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pcie1_pins: pcie1-0 { + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(21, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + pwmdac_pins: pwmdac-0 { pwmdac-pins { pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts index fa0eac78e0ba..5cb9e99e1dac 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -17,6 +17,13 @@ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; }; +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; &phy0 { motorcomm,tx-clk-adj-enabled; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts new file mode 100644 index 000000000000..b720cdd15ed6 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 Henry Bell <dmoo_dv@protonmail.com> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Pine64 Star64"; + compatible = "pine64,star64", "starfive,jh7110"; + aliases { + ethernet1 = &gmac1; + }; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + starfive,tx-use-rgmii-clk; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&pcie1 { + status = "okay"; +}; + +&phy0 { + rx-internal-delay-ps = <1900>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; +}; + +&phy1 { + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <300>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 9d70f21c86fc..18f38fc790a4 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -32,3 +32,11 @@ &mmc0 { non-removable; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 18047195c600..5ac70759e0ab 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -1214,5 +1214,91 @@ #reset-cells = <1>; power-domains = <&pwrc JH7110_PD_VOUT>; }; + + pcie0: pcie@940000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0x40000000 0x0 0x1000000>, + <0x0 0x2b000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + interrupts = <56>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_TL>, + <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE0_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE0_BRG>, + <&stgcrg JH7110_STGRST_PCIE0_CORE>, + <&stgcrg JH7110_STGRST_PCIE0_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie1: pcie@9c0000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0xc0000000 0x0 0x1000000>, + <0x0 0x2c000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; + interrupts = <57>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_TL>, + <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE1_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE1_BRG>, + <&stgcrg JH7110_STGRST_PCIE1_CORE>, + <&stgcrg JH7110_STGRST_PCIE1_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; }; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index d2fa25839012..3c9974062c20 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -122,6 +122,87 @@ }; }; + pmu { + compatible = "riscv,pmu"; + riscv,event-to-mhpmcounters = + <0x00003 0x00003 0x0007fff8>, + <0x00004 0x00004 0x0007fff8>, + <0x00005 0x00005 0x0007fff8>, + <0x00006 0x00006 0x0007fff8>, + <0x00007 0x00007 0x0007fff8>, + <0x00008 0x00008 0x0007fff8>, + <0x00009 0x00009 0x0007fff8>, + <0x0000a 0x0000a 0x0007fff8>, + <0x10000 0x10000 0x0007fff8>, + <0x10001 0x10001 0x0007fff8>, + <0x10002 0x10002 0x0007fff8>, + <0x10003 0x10003 0x0007fff8>, + <0x10010 0x10010 0x0007fff8>, + <0x10011 0x10011 0x0007fff8>, + <0x10012 0x10012 0x0007fff8>, + <0x10013 0x10013 0x0007fff8>; + riscv,event-to-mhpmevent = + <0x00003 0x00000000 0x00000001>, + <0x00004 0x00000000 0x00000002>, + <0x00006 0x00000000 0x00000006>, + <0x00005 0x00000000 0x00000007>, + <0x00007 0x00000000 0x00000008>, + <0x00008 0x00000000 0x00000009>, + <0x00009 0x00000000 0x0000000a>, + <0x0000a 0x00000000 0x0000000b>, + <0x10000 0x00000000 0x0000000c>, + <0x10001 0x00000000 0x0000000d>, + <0x10002 0x00000000 0x0000000e>, + <0x10003 0x00000000 0x0000000f>, + <0x10010 0x00000000 0x00000010>, + <0x10011 0x00000000 0x00000011>, + <0x10012 0x00000000 0x00000012>, + <0x10013 0x00000000 0x00000013>; + riscv,raw-event-to-mhpmcounters = + <0x00000000 0x00000001 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000002 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000003 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000004 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000005 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000006 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000007 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000008 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000009 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000a 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000b 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000c 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000d 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000e 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000000f 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000010 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000011 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000012 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000013 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000014 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000015 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000016 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000017 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000018 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000019 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001a 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001b 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001c 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001d 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001e 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000001f 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000020 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000021 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000022 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000023 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000024 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000025 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000026 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000027 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000028 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x00000029 0xffffffff 0xffffffff 0x0007fff8>, + <0x00000000 0x0000002a 0xffffffff 0xffffffff 0x0007fff8>; + }; + osc: oscillator { compatible = "fixed-clock"; clock-output-names = "osc_24m"; |