diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 49 |
1 files changed, 25 insertions, 24 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 754a64be739c..200e52622f99 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -122,7 +122,7 @@ }; thermal-zones { - ddr-controller { + ddr-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -142,7 +142,7 @@ }; }; - serdes { + serdes-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -162,7 +162,7 @@ }; }; - fman { + fman-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 2>; @@ -182,7 +182,7 @@ }; }; - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; @@ -213,7 +213,7 @@ }; }; - sec { + sec-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 4>; @@ -308,7 +308,7 @@ status = "disabled"; }; - esdhc: esdhc@1560000 { + esdhc: mmc@1560000 { compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -409,11 +409,11 @@ }; - qportals: qman-portals@500000000 { + qportals: qman-portals-bus@500000000 { ranges = <0x0 0x5 0x00000000 0x8000000>; }; - bportals: bman-portals@508000000 { + bportals: bman-portals-bus@508000000 { ranges = <0x0 0x5 0x08000000 0x8000000>; }; @@ -441,7 +441,7 @@ tmu: tmu@1f00000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; - interrupts = <0 33 0x4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ @@ -589,7 +589,7 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -599,7 +599,7 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -609,7 +609,7 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -619,7 +619,7 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -715,7 +715,7 @@ QORIQ_CLK_PLL_DIV(2)>; }; - aux_bus: aux_bus { + aux_bus: aux-bus { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; @@ -801,9 +801,9 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -840,9 +840,9 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -879,9 +879,9 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ - interrupt-names = "aer", "pme"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -925,6 +925,7 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1", "qdma-queue2", "qdma-queue3"; + #dma-cells = <1>; dma-channels = <8>; block-number = <1>; block-offset = <0x10000>; @@ -940,7 +941,7 @@ #fsl,rcpm-wakeup-cells = <1>; }; - ftm_alarm0: timer@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1046a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x20000>; |