| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update MAINTAINERS and CREDITS
sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
sched/psi: Optimise psi_group_change a bit
sched/core: Drop spinlocks on contention iff kernel is preemptible
sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
sched/balance: Skip unnecessary updates to idle load balancer's flags
idle: Remove stale RCU comment
sched/headers: Move struct pre-declarations to the beginning of the header
sched/core: Clean up kernel/sched/sched.h a bit
sched/core: Simplify prefetch_curr_exec_start()
sched: Fix spelling in comments
sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.
Specifics:
- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)
- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)
- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)
- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)
- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)
- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some trivial cleanups
- a fix for the Xen timer
- add boot time selectable debug capability to the Xen multicall
handling
- two fixes for the recently added Xen irqfd handling
* tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove deprecated xen_nopvspin boot parameter
x86/xen: eliminate some private header files
x86/xen: make some functions static
xen: make multicall debug boot time selectable
xen/arm: Convert comma to semicolon
xen: privcmd: Fix possible access to a freed kirqfd instance
xen: privcmd: Switch from mutex to spinlock for irqfds
xen: add missing MODULE_DESCRIPTION() macros
x86/xen: Convert comma to semicolon
x86/xen/time: Reduce Xen timer tick
xen/manage: Constify struct shutdown_handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add support for running the kernel in a SEV-SNP guest, over a Secure
VM Service Module (SVSM).
When running over a SVSM, different services can run at different
protection levels, apart from the guest OS but still within the
secure SNP environment. They can provide services to the guest, like
a vTPM, for example.
This series adds the required facilities to interface with such a
SVSM module.
- The usual fixlets, refactoring and cleanups
[ And as always: "SEV" is AMD's "Secure Encrypted Virtualization".
I can't be the only one who gets all the newer x86 TLA's confused,
can I?
- Linus ]
* tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI/configfs-tsm: Fix an unexpected indentation silly
x86/sev: Do RMP memory coverage check after max_pfn has been set
x86/sev: Move SEV compilation units
virt: sev-guest: Mark driver struct with __refdata to prevent section mismatch
x86/sev: Allow non-VMPL0 execution when an SVSM is present
x86/sev: Extend the config-fs attestation support for an SVSM
x86/sev: Take advantage of configfs visibility support in TSM
fs/configfs: Add a callback to determine attribute visibility
sev-guest: configfs-tsm: Allow the privlevel_floor attribute to be updated
virt: sev-guest: Choose the VMPCK key based on executing VMPL
x86/sev: Provide guest VMPL level to userspace
x86/sev: Provide SVSM discovery support
x86/sev: Use the SVSM to create a vCPU when not in VMPL0
x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0
x86/sev: Use kernel provided SVSM Calling Areas
x86/sev: Check for the presence of an SVSM in the SNP secrets page
x86/irqflags: Provide native versions of the local_irq_save()/restore()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Enable Sub-NUMA clustering to work with resource control on Intel by
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Update documentation with Sub-NUMA cluster changes
x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Make __mon_event_count() handle sum domains
x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Allocate a new field in union mon_data_bits
x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
x86/resctrl: Initialize on-stack struct rmid_read instances
x86/resctrl: Add a new field to struct rmid_read for summation of domains
x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Introduce snc_nodes_per_l3_cache
x86/resctrl: Add node-scope to the options for feature scope
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
x86/resctrl: Prepare for different scope for control/monitor operations
x86/resctrl: Prepare to split rdt_domain structure
x86/resctrl: Prepare for new domain scope
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Remove an unused function and the documentation of an already removed
cmdline parameter
* tag 'x86_cleanups_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Remove unused function __fortify_panic()
Documentation: Remove "mfgpt_irq=" from the kernel-parameters.txt file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This s a very quiet release for the regulator API, we have a few new
devices (most of which are just ID updates) and one new fairly
specialist core feature for use in interrupt context.
- An API allowing lockless enable/disable for regulators acquired in
exclusive mode, for use in interrupt contexts
- A rewrite of the MedaTek DVFSRC regulator driver which apparently
never worked
- Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"
* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: dt-bindings: pca9450: Make interrupt optional
regulator: pca9450: Make IRQ optional
dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
regulator: max77857: Constify struct regmap_config
regulator: da9121: Constify struct regmap_config
dt-bindings: regulator: ti,tps65132: document VIN supply
dt-bindings: mfd: twl: Fix example
regulator: Add Renesas RZ/G2L USB VBUS regulator driver
regulator: core: Add helper for allow HW access to enable/disable regulator
regulator: Add bindings for MediaTek DVFSRC Regulators
regulator: Add refactored mtk-dvfsrc-regulator driver
regulator: Remove mtk-dvfsrc-regulator.c
regulator: userspace-consumer: quiet device deferral
regulator: dt-bindings: mt6315: Document MT6319 PMIC
regulator: add missing MODULE_DESCRIPTION() macro
dt-bindings: regulator: twl-regulator: convert to yaml
regulator: dt-bindings: describe the PMU module of the WCN7850 package
regulator: dt-bindings: describe the PMU module of the QCA6390 package
regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New code:
- Add "cros_ec_hwmon" driver to expose fan speed and temperature
- Add "cros_charge-control" driver to control charge thresholds and
behaviour
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix
Fixes:
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex
- Fix an issue of wrong EC message version in cros_ec_debugfs
Misc:
- Fix kernel-doc errors and cleanups"
* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
power: supply: cros_charge-control: Avoid accessing attributes out of bounds
power: supply: cros_charge-control: don't load if Framework control is present
power: supply: add ChromeOS EC based charge control driver
platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
platform/chrome: Update binary interface for EC-based charge control
ACPI: battery: add devm_battery_hook_register()
dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
platform/chrome: cros_ec_lpc: Handle zero length read/write
platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
platform/chrome: cros_ec_debugfs: fix wrong EC message version
platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
hwmon: (cros_ec) Fix access to restricted __le16
hwmon: (cros_ec) Prevent read overflow in probe()
platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
platform/chrome: cros_ec_lpc: MEC access can return error code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"This contains some minor work for the iomap subsystem:
- Add documentation on the design of iomap and how to port to it
- Optimize iomap_read_folio()
- Bring back the change to iomap_write_end() to no increase i_size.
This is accompanied by a change to xfs to reserve blocks for
truncating large realtime inodes to avoid exposing stale data when
iomap_write_end() stops increasing i_size"
* tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: don't increase i_size in iomap_write_end()
xfs: reserve blocks for truncating large realtime inode
Documentation: the design of iomap and how to port
iomap: Optimize iomap_read_folio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
|
|
Merge cpufreq changes for 6.11-rc1:
- Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada).
- Switch cpufreq to new Intel CPU model defines (Tony Luck).
- Simplify the cpufreq driver interface by switching the .exit() driver
callback to the void return data type (Lizhe, Viresh Kumar).
- Make cpufreq_boost_enabled() return bool (Dhruva Gole).
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin).
- Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
cpufreq drivers (Javier Carrasco).
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou).
- Fix deferred probe handling in the TI cpufreq driver and wrong return
values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona).
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado).
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li).
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).
* pm-cpufreq: (55 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: docs: Add missing scaling_available_frequencies description
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: intel_pstate: Replace boot_cpu_has()
cpufreq: ti: update OPP table for AM62Px SoCs
...
|
|
Describe key-enc-flags and key-enc-flags-mask.
These are defined similarly to key-flags and key-flags-mask.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-11-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct
flow_dissector_key_control, covering the same flags as
currently exposed through TCA_FLOWER_KEY_ENC_FLAGS.
Put the new flags under FLOW_DIS_F_*. The idea is that we can
later, move the existing flags under FLOW_DIS_F_* as well.
The ynl flag names have been taken from the RFC iproute2 patch.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe the flower control flags, and use them
for key-flags and key-flags-mask.
The flag names have been taken from iproute2.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/20240715142543.303944-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop the inputs from the host and instead expect the Bluetooth node to
consume the outputs of the internal PMU. This model is closer to reality
than how we represent it now.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This helps validating DTS files. Introduced changes:
1. Dropped serial details from example
2. Added required example include
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
QCA6390 has a compatible listed in the bindings but is missing the
regulators description. Add the missing supply property and list the
required ones in the allOf section.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is possible to have thermal zones which don't have any trip points.
These zones in effect simply represent a temperature sensor without any
action associated with it. While the schema has always required a
'trips' node, users have existed for a long time without it. Update the
schema to match reality.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709150154.3272825-1-robh@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-12-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Preferred indentation for DTS examples in the bindings is 4-space. It
is also preferred not to have redundant/unused labels. No functional
change
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-22-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify few bindings which already reference thermal-sensor.yaml schema
by dropping unneeded requiring of '#thermal-sensor-cells' and dropping
assigned-clocks properties (core schema allows it if 'clocks' are
there).
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-21-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-20-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-19-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-18-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-17-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-16-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-15-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-14-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-13-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
