summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/clock
AgeCommit message (Collapse)Author
2024-07-16Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC dt updates from Arnd Bergmann: "The devicetree updates are fairly well spread out across platforms, with Qualcomm making up about a third of the total. There are three new SoCs in existing product families this: - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores instead of just two as well as a GPU and more high-speed I/O devices. - Qualcomm QCS8550 is a variant of SM8550 for IOT devices - Airoha EN7581 is a 10G-PON network chip and related to the MT7981 Wireless router chip from its parent Mediatek. In total there are 58 new machines, including four riscv boards and eight for 32-bit arm. The most exciting new addition is probably a pair of laptops based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook S15 and the Lenovo Yoga Slim7x. Other noteworthy new additions are: - A total of 20 Qualcomm based machines, mostly Android devices from Samsung, Motorola and LG, as well as a wireless router and some reference designs - Six NXP i.MX based machines, mostly industrial boards along with some reference designs - Mediatek sees some interesting Filogic based routers including the "OpenWRT One", a few new Chromebooks as well as single-board computers. - Four machines from Solidrun based on Marvell cn913x, replacing the older Armada 8000 based counterparts - The four Amlogic machines are all set top boxes or reference designs for them - The nine new Rockchips machines are mostly single-board computers including some interesting ones based on the rk3588 chip like the ROCK 5 ITX board and the CM3588 with its four NVMe slots - The RISC-V boards are all single-board computers based on Starfive JH7110, Microchip MPFS and Allwinner D1, which all had similar boards already There are also a lot of updates to already supported machines, notably for the TI K3, Rockchips, Freescale and of course Qualcomm platforms" * tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits) arm64: dts: allwinner: h616: add crypto engine node riscv: dts: add clock generator for Sophgo SG2042 SoC arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B mailmap: Update Luca Weiss's email address ARM: dts: ixp4xx: nslu2: beeper uses PWM arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices ARM: dts: qcom: msm8960: correct memory base arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator ...
2024-07-06Merge branch '20240430064214.2030013-3-quic_varada@quicinc.com' into ↵Bjorn Andersson
arm64-for-6.11 Merge IPQ9574 interconnect clock DeviceTree binding to gain access to the interconnect constants.
2024-07-06dt-bindings: interconnect: Add Qualcomm IPQ9574 supportVaradarajan Narayanan
Add interconnect-cells to clock provider so that it can be used as icc provider. Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip interfaces. This will be used by the gcc-ipq9574 driver that will for providing interconnect services using the icc-clk framework. Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240430064214.2030013-3-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-06-27dt-bindings: ti: fix TISCI protocol URL linkRichard Genoud
The http://processors.wiki.ti.com EOL in january 2021 Fix the old URL with the new one. Signed-off-by: Richard Genoud <richard.genoud@bootlin.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240618150933.1824185-2-richard.genoud@bootlin.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-06-25Merge branch '20240602114439.1611-1-quic_jkona@quicinc.com' into arm64-for-6.11Bjorn Andersson
Merge the SM8650 video and clock controller drivers to gain access to the constants from the DeviceTree binding.
2024-06-25dt-bindings: clock: qcom: Add SM8650 camera clock controllerJagadeesh Kona
Add device tree bindings for the camera clock controller on Qualcomm SM8650 platform. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-7-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-06-25dt-bindings: clock: qcom: Update the order of SC8280XP camcc headerJagadeesh Kona
Update the order of SC8280XP camcc header file in SM8450 camcc bindings. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-6-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-06-25dt-bindings: clock: qcom: Add SM8650 video clock controllerJagadeesh Kona
SM8650 video clock controller has most clocks same as SM8450, but it also has few additional clocks and resets. Add device tree bindings for the video clock controller on Qualcomm SM8650 platform by defining these additional clocks and resets on top of SM8450. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-3-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-06-25dt-bindings: clock: qcom: Update SM8450 videocc header file nameJagadeesh Kona
Correct the videocc header file name in SM8450 videocc bindings. Fixes: 1e910b2ba0ed ("dt-bindings: clock: qcom: Add SM8450 video clock controller") Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-2-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-06-12dt-bindings: clock: Add Qcom QCM2290 GPUCCKonrad Dybcio
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's QCM2290 SoCs. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-1-4bc0c19da4af@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-18Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...
2024-05-16Merge branches 'clk-microchip', 'clk-samsung' and 'clk-qcom' into clk-nextStephen Boyd
* clk-microchip: clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clock, reset: microchip: move all mpfs reset code to the reset subsystem * clk-samsung: clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk: samsung: gs101: drop unused HSI2 clock parent data clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit clk: samsung: gs101: propagate PERIC1 USI SPI clock rate clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: exynosautov9: fix wrong pll clock id value dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1 clk: samsung: Implement manual PLL control for ARM64 SoCs * clk-qcom: (27 commits) clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies clk: qcom: mmcc-msm8998: fix venus clock issue clk: qcom: dispcc-sm8650: fix DisplayPort clocks clk: qcom: dispcc-sm8550: fix DisplayPort clocks clk: qcom: dispcc-sm6350: fix DisplayPort clocks clk: qcom: dispcc-sm8450: fix DisplayPort clocks clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll clk: qcom: apss-ipq-pll: constify clk_init_data structures clk: qcom: apss-ipq-pll: constify match data structures clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf clk: qcom: clk-rcg2: add support for rcg2 freq multi ops clk: qcom: clk-rcg: introduce support for multiple conf for same freq clk: qcom: hfpll: Add QCS404-specific compatible dt-bindings: clock: qcom,hfpll: Convert to YAML ...
2024-05-16Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and ↵Stephen Boyd
'clk-rockchip' into clk-next * clk-counted: clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws * clk-imx: clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: imx: add i.MX95 BLK CTL clk driver dt-bindings: clock: support i.MX95 Display Master CSR module dt-bindings: clock: support i.MX95 BLK CTL module dt-bindings: clock: add i.MX95 clock header clk: imx: imx8mp: Add pm_runtime support for power saving * clk-amlogic: clk: meson: s4: fix module autoloading clk: meson: fix module license to GPL only clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF clk: meson: add vclk driver clk: meson: pll: print out pll name when unable to lock it clk: meson: s4: pll: determine maximum register in regmap config clk: meson: s4: peripherals: determine maximum register in regmap config clk: meson: a1: pll: determine maximum register in regmap config clk: meson: a1: peripherals: determine maximum register in regmap config * clk-binding: dt-bindings: clock: fixed: Define a preferred node name * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock clk: rockchip: rk3588: Add reset line for HDMI Receiver clk: rockchip: rk3568: Add missing USB480M_PHY mux dt-bindings: reset: Define reset id used for HDMI Receiver dt-bindings: clock: rockchip: add USB480M_PHY mux
2024-05-16Merge branches 'clk-stm', 'clk-renesas', 'clk-scmi' and 'clk-allwinner' into ↵Stephen Boyd
clk-next - STM32MP257 SoC clk driver - Allocate clk_ops dynamically for SCMI clk driver * clk-stm: dt-bindings: clocks: stm32mp25: add access-controllers description clk: stm32: introduce clocks for STM32MP257 platform dt-bindings: clocks: stm32mp25: add description of all parents clk: stm32mp13: use platform device APIs * clk-renesas: clk: renesas: r9a08g045: Add support for power domains clk: renesas: rzg2l: Extend power domain support dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S dt-bindings: clock: r9a08g045-cpg: Add power domain IDs dt-bindings: clock: r9a07g054-cpg: Add power domain IDs dt-bindings: clock: r9a07g044-cpg: Add power domain IDs dt-bindings: clock: r9a07g043-cpg: Add power domain IDs clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT clk: renesas: r8a7740: Remove unused div4_clk.flags field clk: renesas: r9a07g043: Add clock and reset entry for PLIC clk: renesas: r8a779h0: Add INTC-EX clock clk: renesas: r8a779h0: Add MSIOF clocks clk: renesas: r8a779a0: Fix CANFD parent clock clk: rs9: fix wrong default value for clock amplitude clk: renesas: r8a779h0: Add timer clocks clk: renesas: r8a779h0: Add SCIF clocks clk: renesas: r9a07g044: Mark resets array as const clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const clk: renesas: r8a779h0: Add thermal clock dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks * clk-scmi: clk: scmi: Add support for get/set duty_cycle operations clk: scmi: Add support for re-parenting restricted clocks clk: scmi: Add support for rate change restricted clocks clk: scmi: Add support for state control restricted clocks clk: scmi: Allocate CLK operations dynamically * clk-allwinner: clk: sunxi-ng: fix module autoloading clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
2024-05-16Merge branches 'clk-cleanup', 'clk-airoha', 'clk-mediatek', 'clk-sophgo' and ↵Stephen Boyd
'clk-loongson' into clk-next - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver * clk-cleanup: clk: gemini: Remove an unused field in struct clk_gemini_pci clk: highbank: Remove an unused field in struct hb_clk clk: ti: dpll: fix incorrect #ifdef checks clk: nxp: Remove an unused field in struct lpc18xx_pll * clk-airoha: clk: en7523: Add EN7581 support clk: en7523: Add en_clk_soc_data data structure dt-bindings: clock: airoha: add EN7581 binding * clk-mediatek: clk: mediatek: mt8365-mm: fix DPI0 parent clk: mediatek: pllfh: Don't log error for missing fhctl node * clk-sophgo: clk: sophgo: avoid open-coded 64-bit division clk: sophgo: Make synthesizer struct static clk: sophgo: Add clock support for SG2000 SoC clk: sophgo: Add clock support for CV1810 SoC clk: sophgo: Add clock support for CV1800 SoC dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoC * clk-loongson: clk: clk-loongson2: Add Loongson-2K2000 clock support dt-bindings: clock: loongson2: Add Loongson-2K2000 compatible clk: clk-loongson2: Add Loongson-2K0500 clock support dt-bindings: clock: loongson2: Add Loongson-2K0500 compatible clk: clk-loongson2: Refactor driver for adding new platforms dt-bindings: clock: Add Loongson-2K expand clock index
2024-05-07dt-bindings: clocks: stm32mp25: add access-controllers descriptionGabriel Fernandez
access-controllers is an optional property that allows to refer to domain access controller. The RCC driver will be able to check if we are allowed to register clocks for a peripheral. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20240419152723.570159-2-gabriel.fernandez@foss.st.com Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-05-07Merge tag 'samsung-dt64-6.10-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.10, part two Few changes exclusively for Google GS101: 1. Add HSI0 and HSI2 clock controllers (CMUs). 2. Add USB 3.1 Dual Role Device (DRD) support. 3. Add UFS (Universal Flash Storage) support. 4. Document bus clocks in pin controllers necessary for accessing registers. * tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes arm64: dts: exynos: gs101: Add the hsi2 sysreg node dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible arm64: dts: exynos: gs101-oriole: enable USB on this board arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03dt-bindings: clock: fixed: Define a preferred node nameRob Herring (Arm)
Define "clock-<freq>" as the preferred node name for fixed-clock and fixed-factor-clock where <freq> is the output frequency of the clock. There isn't much of an existing pattern for names of these nodes. The most frequent patterns are a prefix or suffix of "clk", but there's a bunch that don't follow any sort of pattern. We could use "clock-controller-.*", but these nodes aren't really a controller in any way. So let's at least align with part of that and use 'clock-'. For now this only serves as documentation as the schema still allows anything to avoid lots of additional warnings for something low priority to fix. Once a "no deprecated" mode is added to the tools, warnings can be enabled selectively. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240430180415.657067-1-robh@kernel.org Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-29Merge branch 'for-v6.10/clk-gs101-bindings' into next/clkKrzysztof Kozlowski
2024-04-29dt-bindings: clock: google,gs101-clock: add HSI2 clock management unitPeter Griffin
Add dt schema documentation and clock IDs for the High Speed Interface 2 (HSI2) clock management unit. This CMU feeds high speed interfaces such as PCIe and UFS. [AD: * keep CMUs in google,gs101.h sorted alphabetically * resolve minor merge conflicts in google,gs101-clock.yaml * s/ufs_embd/ufs s/mmc_card/mmc Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240429-hsi0-gs101-v3-1-f233be0a2455@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-25dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for ↵Claudiu Beznea
RZ/G3S The driver will be modified (in the next commits) to be able to specify individual power domain IDs for each IP. The driver will still support #power-domain-cells = <0>, thus, previous users are not affected. The #power-domain-cells = <1> has been instantiated only for RZ/G3S at the moment, as individual platform clock drivers need to be adapted for this to be supported on the rest of the SoCs. Also, the description for #power-domain-cells is updated with links to per-SoC power domain IDs. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25dt-bindings: clock: google,gs101-clock: add HSI0 clock management unitAndré Draszik
Add dt-schema documentation and clock IDs for the high speed interface 0 HSI0 clock management unit. This is used (amongst others) for USB. While the usual (sed) script has been used to derive the linux clock IDs from the data sheet, one manual tweak was applied to fix a typo which we don't want to carry: HSI0_USPDPDBG_USER -> HSI0_USBDPDBG_USER (note USB vs USP). Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240423-hsi0-gs101-v1-1-2c3ddb50c720@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-23dt-bindings: clock: qcom,hfpll: Convert to YAMLLuca Weiss
Convert the .txt documentation to .yaml with some adjustments. * APQ8064/IPQ8064/MSM8960 compatibles are dropped since their HFPLLs are a part of GCC so there is no need for a separate compat entry. * Change the MSM8974 compatible to follow the updated naming schema. Theis compatible is not used upstream yet. * Add qcs404-hfpll. QCS404 currently uses qcom,hfpll. Mark that as deprecated since every SoC appears to need different driver data so "qcom,hfpll" makes no sense to keep Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-1-31543e0d6261@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-22dt-bindings: clock: support i.MX95 Display Master CSR modulePeng Fan
i.MX95 DISPLAY_MASTER_CSR includes registers to control DSI clock settings, clock gating, and pixel link select. Add dt-schema for it. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-3-84d4eca1e759@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-04-22dt-bindings: clock: support i.MX95 BLK CTL modulePeng Fan
i.MX95 includes BLK CTL module in several MIXes, such as VPU_CSR in VPUMIX, CAMERA_CSR in CAMERAMIX and etc. The BLK CTL module is used for various settings of a specific MIX, such as clock, QoS and etc. This patch is to add some BLK CTL modules that has clock features. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-2-84d4eca1e759@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-04-11dt-bindings: clocks: stm32mp25: add description of all parentsGabriel Fernandez
RCC driver uses '.index' to define all parent clocks instead '.names' because the use of a name to define a parent clock is discouraged. This is an ABI change, but the RCC driver has not yet merged, unlike all others drivers besides Linux. Fixes: b5be49db3d47 ("dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240411092453.243633-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-11dt-bindings: clock: loongson2: Add Loongson-2K2000 compatibleBinbin Zhou
Add the devicetree compatible for Loongson-2K2000 clocks. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/4820325406aec322ae7c062e2b03437d0c95e820.1712731524.git.zhoubinbin@loongson.cn Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-11dt-bindings: clock: loongson2: Add Loongson-2K0500 compatibleBinbin Zhou
Add the devicetree compatible for Loongson-2K0500 clocks. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/c4784102d2bb8bf6982799babe39d5827235461d.1712731524.git.zhoubinbin@loongson.cn Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-11dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoCInochi Amaoto
SG2000 series SoC has the same clock as CV1810 series, but the clock related to A53 is functional in SG2000 series. So a new compatible string is needed for the new SoC. Add definition for the clock controller of the SG2000 series SoC. Link: https://github.com/sophgo/sophgo-doc/releases/tag/sg2000-datasheet-v1.0-alpha Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/r/IA1PR20MB495368F185E018767CC6714ABB262@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-10dt-bindings: clock: airoha: add EN7581 bindingLorenzo Bianconi
Introduce Airoha EN7581 entry in Airoha EN7523 clock binding Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/99734deb28889e685a764da94418f68b55ee3bdc.1712399981.git.lorenzo@kernel.org Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-03dt-bindings: clock: ti: remove unstable remarkKrzysztof Kozlowski
Several TI SoC clock bindings were marked as work-in-progress / unstable between 2013-2016, for example in commit f60b1ea5ea7a ("CLK: TI: add support for gate clock"). It was enough of time to consider them stable and expect usual ABI rules. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240224091236.10146-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2024-04-03dt-bindings: clock: keystone: remove unstable remarkKrzysztof Kozlowski
Keystone clock controller bindings were marked as work-in-progress / unstable in 2013 in commit b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver") and commit 7affe5685c96 ("clk: keystone: Add gate control clock driver") Almost eleven years is enough, so drop the "unstable" remark and expect usual ABI rules. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240224091236.10146-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2024-03-26dt-bindings: clock: samsung,s3c6400-clock: convert to DT SchemaKrzysztof Kozlowski
Convert Samsung S3C6400/S3C6410 SoC clock controller bindings to DT schema. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240312185035.720491-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-15Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Not a ton of stuff happening in the clk framework. We got some more devm helpers and we seem to be going in the direction of "just turn this stuff on already and leave me alone!" with the addition of a devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a pmdomain that drivers attach instead, but this API should help drivers simplify in the meantime. Outside of the devm wrappers, we've got the usual clk driver updates that are dominated by the major phone SoC vendors (Samsung and Qualcomm) and the non-critical driver fixes for things like incorrect topology descriptions and wrong registers or bit fields. More details are below, but I'd say that it looks pretty ordinary. The only thing that really jumps out at me is the Renesas clk driver that's ignoring clks that are assigned to remote processors in DeviceTree. That's a new feature that they're using to avoid marking clks as CLK_IGNORE_UNUSED based on the configuration of the system. Core: - Increase dev_id len for clkdev lookups - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Add a devm variant of clk_rate_exclusive_get() New Drivers: - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC - Google GS101 PERIC0 and PERIC1 clock controllers - Exynos850 PDMA clocks - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers Removed Drivers: - Remove the unused Qualcomm sc7180 modem clk driver Updates: - Fix some static checker errors in the Hisilicon clk driver - Polarfire MSSPLL hardware has 4 output clocks (the driver supported previously only one output); each of these 4 outputs feed dividers and the output of each divider feed individual hardware blocks (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to control their clocks thus clock driver support was added for all MSSPLL output clocks - Typo fixes in the Qualcomm IPQ5018 GCC driver - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi - Properly terminate frequency tables in different Qualcomm clk drivers - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953 - Add missing UFS CLKREF clks on Qualcomm SC8180X - Avoid significant delays during boot by adding a softdep on rpmhpd to Qualcomm SDM845 gcc driver - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver - Switch display, GPU, video, and camera Qualcomm clk drivers to module_platform_driver() - Set a longer delay for Venus resets on many Qualcomm SoCs - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver - Fix clock listing Oops on Amlogic axg - New pll-rate for Rockchip rk3568 - i2s rate improvements for Rockchip rk3399 - Rockchip rk3588 syscon clock fixes and removal of overall clock-number from the rk3588 binding header - A prerequisite for later improvements to the Rockchip rk3588 linked clocks - Minor clean-ups and error handling improvements in both composite-8m and SCU i.MX clock drivers - Fix for SAI_MCLK_SEL definition for i.MX8MP - Register the Samsung CMU MISC clock controller earlier, so the Multi Core Timer clocksource can use it on Google GS101 - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get proper clock rates - Refactor the generic Samsung CPU clock controllers code, preparing it for supporting Exynos850 CPU clocks - Fix some clk kerneldoc warnings - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4M - Ignore all clocks which are assigned to a non-Linux system in the Renesas clk driver - Add watchdog clock on Renesas RZ/G3S - Add camera (CRU) clock and reset on Renesas RZ/G2UL - Add support for the Renesas R-Car V4M (R8A779H0) SoC - Convert some clk bindings to YAML so they can be validated" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: Fix clk_core_get NULL dereference clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: Add a devm variant of clk_rate_exclusive_get() ...
2024-03-13Merge branches 'clk-samsung', 'clk-imx', 'clk-rockchip', 'clk-clkdev' and ↵Stephen Boyd
'clk-rate-exclusive' into clk-next - Increase dev_id len for clkdev lookups * clk-samsung: (25 commits) clk: samsung: Add CPU clock support for Exynos850 clk: samsung: Pass mask to wait_until_mux_stable() clk: samsung: Keep register offsets in chip specific structure clk: samsung: Keep CPU clock chip specific data in a dedicated struct clk: samsung: Pass register layout type explicitly to CLK_CPU() clk: samsung: Pass actual CPU clock registers base to CPU_CLK() clk: samsung: Group CPU clock functions by chip clk: samsung: Use single CPU clock notifier callback for all chips clk: samsung: Reduce params count in exynos_register_cpu_clock() clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c clk: samsung: Improve clk-cpu.c style dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1 clk: samsung: gs101: add support for cmu_peric1 clk: samsung: gs101: drop extra empty line dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit clk: samsung: exynos850: Propagate SPI IPCLK rate change clk: samsung: gs101: gpio_peric0_pclk needs to be kept on clk: samsung: exynos850: Add PDMA clocks dt-bindings: clock: tesla,fsd: Fix spelling mistake clk: samsung: gs101: add support for cmu_peric0 ... * clk-imx: clk: imx: imx8mp: Fix SAI_MCLK_SEL definition clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev() clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite() clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection * clk-rockchip: clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent clk: rockchip: rk3588: use linked clock ID for GATE_LINK clk: rockchip: rk3588: fix indent clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf dt-bindings: clock: rk3588: add missing PCLK_VO1GRF dt-bindings: clock: rk3588: drop CLK_NR_CLKS clk: rockchip: rk3588: fix CLK_NR_CLKS usage clk: rockchip: rk3568: Add PLL rate for 128MHz * clk-clkdev: clkdev: Update clkdev id usage to allow for longer names * clk-rate-exclusive: clk: Add a devm variant of clk_rate_exclusive_get()
2024-03-13Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and ↵Stephen Boyd
'clk-microchip' into clk-next * clk-remove: clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void * clk-amlogic: clk: meson: Add missing clocks to axg_clk_regmaps * clk-qcom: (62 commits) clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller clk: qcom: drop the SC7180 Modem subsystem clock driver clk: qcom: Use qcom_branch_set_clk_en() clk: qcom: branch: Add a helper for setting the enable bit clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks clk: qcom: gcc-msm8953: add more resets clk: qcom: videocc-*: switch to module_platform_driver ... * clk-parent: clk: Fix clk_core_get NULL dereference * clk-microchip: clk: microchip: mpfs: convert MSSPLL outputs to clk_divider clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: split MSSPLL in two dt-bindings: can: mpfs: add missing required clock dt-bindings: clock: mpfs: add more MSSPLL output definitions
2024-03-13Merge branches 'clk-aspeed', 'clk-keystone', 'clk-mobileye' and ↵Stephen Boyd
'clk-allwinner' into clk-next * clk-aspeed: clk: ast2600: Add FSI parent clock with correct rate dt-bindings: clock: ast2600: Add FSI clock * clk-keystone: clk: keystone: sci-clk: Adding support for non contiguous clocks * clk-mobileye: dt-bindings: reset: mobileye,eyeq5-reset: add bindings dt-bindings: clock: mobileye,eyeq5-clk: add bindings clk: fixed-factor: add fwname-based constructor functions clk: fixed-factor: add optional accuracy support * clk-allwinner: clk: sunxi: usb: fix kernel-doc warnings clk: sunxi: sun9i-cpus: fix kernel-doc warnings clk: sunxi: a20-gmac: fix kernel-doc warnings
2024-03-13Merge branches 'clk-renesas', 'clk-cleanup', 'clk-hisilicon', 'clk-mediatek' ↵Stephen Boyd
and 'clk-bulk' into clk-next - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Fix some static checker errors in the hisilicon clk driver * clk-renesas: (25 commits) clk: renesas: r8a779h0: Add RPC-IF clock clk: renesas: r8a779h0: Add SYS-DMAC clocks clk: renesas: r8a779h0: Add SDHI clock clk: renesas: r8a779h0: Add EtherAVB clocks clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux clk: renesas: r8a779f0: Correct PFC/GPIO parent clock clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks clk: renesas: r8a779h0: Add I2C clocks clk: renesas: r8a779h0: Add watchdog clock clk: renesas: r8a779h0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Fix PCIe clock name clk: renesas: cpg-mssr: Add support for R-Car V4M clk: renesas: rcar-gen4: Add support for FRQCRC1 clk: renesas: r9a07g043: Add clock and reset entries for CRU clk: renesas: r9a08g045: Add clock and reset support for watchdog dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support dt-bindings: power: Add r8a779h0 SYSC power domain definitions dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support ... * clk-cleanup: clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: ti: dpll3xxx: use correct function names in kernel-doc clk: clocking-wizard: Remove redundant initialization of pointer div_addr clk: keystone: sci-clk: match func name comment to actual clk: cdce925: Remove redundant assignment to variable 'rate' MAINTAINERS: drop Sekhar Nori * clk-hisilicon: clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc() clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister() * clk-mediatek: clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: mediatek: add infracfg reset controller for mt7988 dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock dt-bindings: clock: mediatek: convert hifsys to the json-schema clock clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe() * clk-bulk: clk: Provide managed helper to get and enable bulk clocks
2024-03-01Merge tag 'qcom-arm64-for-6.9' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.9 Four variants of Samsung Galaxy Core Prime and Grand Prime, built on MSM8916, and the Hardware Development Kit (HDK) for SM8550, are introduced. On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P, TCSR, USB, display, audio, and soundwire support is introduced, and enabled across the CRD and QCP devices. For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is defined. Missing qlink-logging reserved-memory region is added for the modem remoteproc. FastRPC compute contexts are marked dma-coherent. Audio, USB Type-C and PM8010 support is introduced across MTP and QRD devices. GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X, SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550. UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP, SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650. PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450, SM8550, SM8650, SC7280, and SC8180X On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline Crypto Engine (ICE) is enabled for IPQ9574. On MSM8953 the GPU and its IOMMU is introduced, the reset for the display subsystem is also wired up. VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and SM6115. USB Type-C port management is enabled on QRB4210 RB2. On the SA8295P ADP the MAX20411 regulator powering the GPU rails is introduced and the GPU is enabled. The first PCI instance on SA8540P Ride is disabled for now, as a fix for the interrupt storm produced here has not been presented. On SA8775P the firmware memory map has changed and is updated. Safety IRQ is added to the Ethernet controller. On SC7180 UFS support is introduced and the cros-ec-spi is marked as wakeup source. For SC7280 capacity and DPC properties are added, cryptobam definition is improved to work in more firmware environments, more Chrome-specific properties are moved out from main dtsi, and cros-ec-spi is maked as a wakeup source. Slimbus definition is added to the platform. A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK and Venus are enabled. LEDs are introduced and voltage settings corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes and GCC protected clocks are introduced to make the board boot properly. RPMh sleep stats and a variety of cleanups and fixes are introduced for SC8180X. On SC8280XP the additional tsens instances are introduced. Camera Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp vadc channels are introduced on the CRD, to allow ADC channels to be tied to the shared PMIC temp-alarms, to actually report temperature. On SDM630 USB QMP PHY support is introduced and enabled on the Inforce IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled and configured. On SM6350 display subsystem interconnects and tsens-based thermal zones are added. On SM7125 UFS support is added. On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware paths are corrected. SM8150 PCIe controller definitions are corrected. As with SM8650, the SM8550 the fastrpc compute contexts are marked dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS controller frequency definition is moved to the generic opp-table. Touchscreen is enabled on the QRD device. As usual, a variety of smaller cleanups and corrections to match DeviceTree bindings and style guidelines are introduced across the various files. * tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits) arm64: dts: qcom: sm6115: fix USB PHY configuration arm64: dts: sm8650: Add msi-map-mask for PCIe nodes arm64: dts: qcom: replace underscores in node names dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE arm64: dts: qcom: pm4125: define USB-C related blocks arm64: dts: qcom: sa8540p-ride: disable pcie2a node arm64: dts: qcom: sc7280: add slimbus DT node arm64: dts: qcom: sc7280: Add capacity and DPC properties arm64: dts: qcom: pmi632: Add PBS client and use in LPG node arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1 arm64: dts: qcom: sm8150: correct PCIe wake-gpios arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU arm64: dts: qcom: sm6350: Remove "disabled" state of GMU arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge arm64: dts: qcom: sm6350: Add interconnect for MDSS arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2 arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts arm64: dts: qcom: minor whitespace cleanup ... Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'samsung-dt64-6.9' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.9 Mostly work around Google GS101 SoC and Pixel phone (Oriole) adding support for: 1. Multi Core Timer (MCT) clocksource. 2. Several clock controllers (DTS and DT bindings) and use new clocks in several other device nodes. 3. More serial-interface instances: USI8 and USI12 with I2C. Exynos850: 1. SPI and DMA controllers (PL330). * tag 'samsung-dt64-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: fsd: Add fifosize for UART in Device Tree arm64: dts: exynos: gs101: minor whitespace cleanup arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole arm64: dts: exynos: gs101: define USI12 with I2C configuration arm64: dts: exynos: gs101: enable cmu-peric1 clock controller dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit arm64: dts: exynos: Add SPI nodes for Exynos850 arm64: dts: exynos: Add PDMA node for Exynos850 arm64: dts: exynos: gs101: use correct clocks for usi_uart arm64: dts: exynos: gs101: use correct clocks for usi8 arm64: dts: exynos: gs101: sysreg_peric0 needs a clock arm64: dts: exynos: gs101: enable eeprom on gs101-oriole arm64: dts: exynos: gs101: define USI8 with I2C configuration arm64: dts: exynos: gs101: update USI UART to use peric0 clocks arm64: dts: exynos: gs101: enable cmu-peric0 clock controller arm64: dts: exynos: gs101: remove reg-io-width from serial arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node dt-bindings: clock: exynos850: Add PDMA clocks dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit Link: https://lore.kernel.org/r/20240218182141.31213-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'renesas-dts-for-v6.9-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.9 - Add GPIO keys and watchdog support for the RZ/G3S SMARC development board, - Add GNSS support for Renesas ULCB development boards equipped with the Shimafuji Kingfisher extension, - Add support for the standalone White Hawk CPU board, - Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White Hawk Single development board, - Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray Hawk Single development board, - Add camera support for the RZ/G2UL SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits) arm64: dts: renesas: gray-hawk-single: Enable watchdog timer arm64: dts: renesas: r8a779h0: Add RWDT node arm64: dts: renesas: Improve TMU interrupt descriptions ARM: dts: renesas: Improve TMU interrupt descriptions arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes arm64: dts: renesas: Add Gray Hawk Single board support arm64: dts: renesas: Add Renesas R8A779H0 SoC support arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface arm64: dts: renesas: r9a08g045: Add watchdog node arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support dt-bindings: power: Add r8a779h0 SYSC power domain definitions dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support arm64: dts: renesas: r8a779g2: Add White Hawk Single support arm64: dts: renesas: Add Renesas R8A779G2 SoC support arm64: dts: renesas: white-hawk: Factor out common parts arm64: dts: renesas: white-hawk-cpu: Factor out common parts arm64: dts: renesas: white-hawk: Add SoC name to top-level comment arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards ... Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-25dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1Sam Protsenko
Document CPU clock management unit compatibles and add corresponding clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks for each cluster, and there are alternate ("switch") clocks that can be used temporarily while re-configuring the PLL for the new rate. ACLK, ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses. CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to change CPU rates. Also some CoreSight clocks can be derived from DBG_USER (debug clock). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-21dt-bindings: clock: mobileye,eyeq5-clk: add bindingsThéo Lebrun
Add DT schema bindings for the EyeQ5 clock controller driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-3-31d4ce3630c3@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-21dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clockRafał Miłecki
This helps validating DTS files. Introduced changes: 1. Documented "reg" property 2. Dropped "syscon" as it was incorrectly used 3. Adjusted nodename, "compatible" and "reg" in example Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240214061233.24645-4-zajec5@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-21dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clockRafał Miłecki
This helps validating DTS files. Introduced changes: 1. Documented "reg" property 2. Dropped "syscon" as it was incorrectly used 3. Adjusted nodename, "compatible" and "reg" in example Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240214061233.24645-3-zajec5@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-21dt-bindings: clock: mediatek: convert hifsys to the json-schema clockRafał Miłecki
This helps validating DTS files. Introduced changes: 1. Documented "reg" property 2. Documented "#reset-cells" property 3. Dropped "syscon" as it was incorrectly used 4. Adjusted "compatible" and "reg" in example Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240214061233.24645-2-zajec5@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-16dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controllerDmitry Baryshkov
This clock controller has never been used in the DT files merged to the kernel. According to Sibi, it only worked on the pre-production devices. For the production devices this functionality has been moved to the firmware. Drop the bindings now after dropping the driver itself. Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-07Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/clkKrzysztof Kozlowski
dt-bindings for Google GS101 clock controllers for v6.9 The Devicetree binding headers for Samsung Exynos and Google GS101 clock controllers, used by the Samsung clock controller drivers.
2024-02-07dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unitAndré Draszik
Add dt-schema documentation and clock IDs for the Connectivity Peripheral 1 (PERIC1) clock management unit. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-06Merge branch ↵Bjorn Andersson
'20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into arm64-for-6.9 Merge the X1E clock binding topic branch, to gain access to the many clock defines.
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-05 03:51:11 +0000