diff options
Diffstat (limited to 'drivers/firmware/arm_scmi/sensors.c')
-rw-r--r-- | drivers/firmware/arm_scmi/sensors.c | 720 |
1 files changed, 668 insertions, 52 deletions
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index b4232d611033..4541b891b733 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -2,21 +2,30 @@ /* * System Control and Management Interface (SCMI) Sensor Protocol * - * Copyright (C) 2018 ARM Ltd. + * Copyright (C) 2018-2020 ARM Ltd. */ #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt +#include <linux/bitfield.h> #include <linux/scmi_protocol.h> #include "common.h" #include "notify.h" +#define SCMI_MAX_NUM_SENSOR_AXIS 63 +#define SCMIv2_SENSOR_PROTOCOL 0x10000 + enum scmi_sensor_protocol_cmd { SENSOR_DESCRIPTION_GET = 0x3, SENSOR_TRIP_POINT_NOTIFY = 0x4, SENSOR_TRIP_POINT_CONFIG = 0x5, SENSOR_READING_GET = 0x6, + SENSOR_AXIS_DESCRIPTION_GET = 0x7, + SENSOR_LIST_UPDATE_INTERVALS = 0x8, + SENSOR_CONFIG_GET = 0x9, + SENSOR_CONFIG_SET = 0xA, + SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB, }; struct scmi_msg_resp_sensor_attributes { @@ -28,29 +37,106 @@ struct scmi_msg_resp_sensor_attributes { __le32 reg_size; }; +/* v3 attributes_low macros */ +#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x)) +#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x)) +#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x)) +#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x)) + +/* v2 attributes_high macros */ +#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x)) +#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x)) + +/* v3 attributes_high macros */ +#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x)) +#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x)) + +/* v3 resolution macros */ +#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x)) +#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x)) + +struct scmi_msg_resp_attrs { + __le32 min_range_low; + __le32 min_range_high; + __le32 max_range_low; + __le32 max_range_high; +}; + struct scmi_msg_resp_sensor_description { __le16 num_returned; __le16 num_remaining; - struct { + struct scmi_sensor_descriptor { __le32 id; __le32 attributes_low; -#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31)) -#define NUM_TRIP_POINTS(x) ((x) & 0xff) +/* Common attributes_low macros */ +#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x)) +#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x)) __le32 attributes_high; -#define SENSOR_TYPE(x) ((x) & 0xff) -#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f) -#define SENSOR_SCALE_SIGN BIT(4) -#define SENSOR_SCALE_EXTEND GENMASK(7, 5) -#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f) -#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f) - u8 name[SCMI_MAX_STR_SIZE]; - } desc[0]; +/* Common attributes_high macros */ +#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x)) +#define SENSOR_SCALE_SIGN BIT(4) +#define SENSOR_SCALE_EXTEND GENMASK(31, 5) +#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x)) + u8 name[SCMI_MAX_STR_SIZE]; + /* only for version > 2.0 */ + __le32 power; + __le32 resolution; + struct scmi_msg_resp_attrs scalar_attrs; + } desc[]; }; -struct scmi_msg_sensor_trip_point_notify { +/* Base scmi_sensor_descriptor size excluding extended attrs after name */ +#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28 + +/* Sign extend to a full s32 */ +#define S32_EXT(v) \ + ({ \ + int __v = (v); \ + \ + if (__v & SENSOR_SCALE_SIGN) \ + __v |= SENSOR_SCALE_EXTEND; \ + __v; \ + }) + +struct scmi_msg_sensor_axis_description_get { + __le32 id; + __le32 axis_desc_index; +}; + +struct scmi_msg_resp_sensor_axis_description { + __le32 num_axis_flags; +#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x)) +#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x)) + struct scmi_axis_descriptor { + __le32 id; + __le32 attributes_low; + __le32 attributes_high; + u8 name[SCMI_MAX_STR_SIZE]; + __le32 resolution; + struct scmi_msg_resp_attrs attrs; + } desc[]; +}; + +/* Base scmi_axis_descriptor size excluding extended attrs after name */ +#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28 + +struct scmi_msg_sensor_list_update_intervals { + __le32 id; + __le32 index; +}; + +struct scmi_msg_resp_sensor_list_update_intervals { + __le32 num_intervals_flags; +#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x)) +#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x)) +#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x)) + __le32 intervals[]; +}; + +struct scmi_msg_sensor_request_notify { __le32 id; __le32 event_control; -#define SENSOR_TP_NOTIFY_ALL BIT(0) +#define SENSOR_NOTIFY_ALL BIT(0) }; struct scmi_msg_set_sensor_trip_point { @@ -66,18 +152,46 @@ struct scmi_msg_set_sensor_trip_point { __le32 value_high; }; +struct scmi_msg_sensor_config_set { + __le32 id; + __le32 sensor_config; +}; + struct scmi_msg_sensor_reading_get { __le32 id; __le32 flags; #define SENSOR_READ_ASYNC BIT(0) }; +struct scmi_resp_sensor_reading_complete { + __le32 id; + __le64 readings; +}; + +struct scmi_sensor_reading_resp { + __le32 sensor_value_low; + __le32 sensor_value_high; + __le32 timestamp_low; + __le32 timestamp_high; +}; + +struct scmi_resp_sensor_reading_complete_v3 { + __le32 id; + struct scmi_sensor_reading_resp readings[]; +}; + struct scmi_sensor_trip_notify_payld { __le32 agent_id; __le32 sensor_id; __le32 trip_point_desc; }; +struct scmi_sensor_update_notify_payld { + __le32 agent_id; + __le32 sensor_id; + struct scmi_sensor_reading_resp readings[]; +}; + struct sensors_info { u32 version; int num_sensors; @@ -114,6 +228,194 @@ static int scmi_sensor_attributes_get(const struct scmi_handle *handle, return ret; } +static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out, + struct scmi_msg_resp_attrs *in) +{ + out->min_range = get_unaligned_le64((void *)&in->min_range_low); + out->max_range = get_unaligned_le64((void *)&in->max_range_low); +} + +static int scmi_sensor_update_intervals(const struct scmi_handle *handle, + struct scmi_sensor_info *s) +{ + int ret, cnt; + u32 desc_index = 0; + u16 num_returned, num_remaining; + struct scmi_xfer *ti; + struct scmi_msg_resp_sensor_list_update_intervals *buf; + struct scmi_msg_sensor_list_update_intervals *msg; + + ret = scmi_xfer_get_init(handle, SENSOR_LIST_UPDATE_INTERVALS, + SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &ti); + if (ret) + return ret; + + buf = ti->rx.buf; + do { + u32 flags; + + msg = ti->tx.buf; + /* Set the number of sensors to be skipped/already read */ + msg->id = cpu_to_le32(s->id); + msg->index = cpu_to_le32(desc_index); + + ret = scmi_do_xfer(handle, ti); + if (ret) + break; + + flags = le32_to_cpu(buf->num_intervals_flags); + num_returned = NUM_INTERVALS_RETURNED(flags); + num_remaining = NUM_INTERVALS_REMAINING(flags); + + /* + * Max intervals is not declared previously anywhere so we + * assume it's returned+remaining. + */ + if (!s->intervals.count) { + s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags); + s->intervals.count = num_returned + num_remaining; + /* segmented intervals are reported in one triplet */ + if (s->intervals.segmented && + (num_remaining || num_returned != 3)) { + dev_err(handle->dev, + "Sensor ID:%d advertises an invalid segmented interval (%d)\n", + s->id, s->intervals.count); + s->intervals.segmented = false; + s->intervals.count = 0; + ret = -EINVAL; + break; + } + /* Direct allocation when exceeding pre-allocated */ + if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) { + s->intervals.desc = + devm_kcalloc(handle->dev, + s->intervals.count, + sizeof(*s->intervals.desc), + GFP_KERNEL); + if (!s->intervals.desc) { + s->intervals.segmented = false; + s->intervals.count = 0; + ret = -ENOMEM; + break; + } + } + } else if (desc_index + num_returned > s->intervals.count) { + dev_err(handle->dev, + "No. of update intervals can't exceed %d\n", + s->intervals.count); + ret = -EINVAL; + break; + } + + for (cnt = 0; cnt < num_returned; cnt++) + s->intervals.desc[desc_index + cnt] = + le32_to_cpu(buf->intervals[cnt]); + + desc_index += num_returned; + + scmi_reset_rx_to_maxsz(handle, ti); + /* + * check for both returned and remaining to avoid infinite + * loop due to buggy firmware + */ + } while (num_returned && num_remaining); + + scmi_xfer_put(handle, ti); + return ret; +} + +static int scmi_sensor_axis_description(const struct scmi_handle *handle, + struct scmi_sensor_info *s) +{ + int ret, cnt; + u32 desc_index = 0; + u16 num_returned, num_remaining; + struct scmi_xfer *te; + struct scmi_msg_resp_sensor_axis_description *buf; + struct scmi_msg_sensor_axis_description_get *msg; + + s->axis = devm_kcalloc(handle->dev, s->num_axis, + sizeof(*s->axis), GFP_KERNEL); + if (!s->axis) + return -ENOMEM; + + ret = scmi_xfer_get_init(handle, SENSOR_AXIS_DESCRIPTION_GET, + SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &te); + if (ret) + return ret; + + buf = te->rx.buf; + do { + u32 flags; + struct scmi_axis_descriptor *adesc; + + msg = te->tx.buf; + /* Set the number of sensors to be skipped/already read */ + msg->id = cpu_to_le32(s->id); + msg->axis_desc_index = cpu_to_le32(desc_index); + + ret = scmi_do_xfer(handle, te); + if (ret) + break; + + flags = le32_to_cpu(buf->num_axis_flags); + num_returned = NUM_AXIS_RETURNED(flags); + num_remaining = NUM_AXIS_REMAINING(flags); + + if (desc_index + num_returned > s->num_axis) { + dev_err(handle->dev, "No. of axis can't exceed %d\n", + s->num_axis); + break; + } + + adesc = &buf->desc[0]; + for (cnt = 0; cnt < num_returned; cnt++) { + u32 attrh, attrl; + struct scmi_sensor_axis_info *a; + size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ; + + attrl = le32_to_cpu(adesc->attributes_low); + + a = &s->axis[desc_index + cnt]; + + a->id = le32_to_cpu(adesc->id); + a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl); + + attrh = le32_to_cpu(adesc->attributes_high); + a->scale = S32_EXT(SENSOR_SCALE(attrh)); + a->type = SENSOR_TYPE(attrh); + strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE); + + if (a->extended_attrs) { + unsigned int ares = + le32_to_cpu(adesc->resolution); + + a->resolution = SENSOR_RES(ares); + a->exponent = + S32_EXT(SENSOR_RES_EXP(ares)); + dsize += sizeof(adesc->resolution); + + scmi_parse_range_attrs(&a->attrs, + &adesc->attrs); + dsize += sizeof(adesc->attrs); + } + + adesc = (typeof(adesc))((u8 *)adesc + dsize); + } + + desc_index += num_returned; + + scmi_reset_rx_to_maxsz(handle, te); + /* + * check for both returned and remaining to avoid infinite + * loop due to buggy firmware + */ + } while (num_returned && num_remaining); + + scmi_xfer_put(handle, te); + return ret; +} + static int scmi_sensor_description_get(const struct scmi_handle *handle, struct sensors_info *si) { @@ -131,9 +433,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, buf = t->rx.buf; do { + struct scmi_sensor_descriptor *sdesc; + /* Set the number of sensors to be skipped/already read */ put_unaligned_le32(desc_index, t->tx.buf); - ret = scmi_do_xfer(handle, t); if (ret) break; @@ -147,22 +450,97 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, break; } + sdesc = &buf->desc[0]; for (cnt = 0; cnt < num_returned; cnt++) { u32 attrh, attrl; struct scmi_sensor_info *s; + size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ; - attrl = le32_to_cpu(buf->desc[cnt].attributes_low); - attrh = le32_to_cpu(buf->desc[cnt].attributes_high); s = &si->sensors[desc_index + cnt]; - s->id = le32_to_cpu(buf->desc[cnt].id); - s->type = SENSOR_TYPE(attrh); - s->scale = SENSOR_SCALE(attrh); - /* Sign extend to a full s8 */ - if (s->scale & SENSOR_SCALE_SIGN) - s->scale |= SENSOR_SCALE_EXTEND; + s->id = le32_to_cpu(sdesc->id); + + attrl = le32_to_cpu(sdesc->attributes_low); + /* common bitfields parsing */ s->async = SUPPORTS_ASYNC_READ(attrl); s->num_trip_points = NUM_TRIP_POINTS(attrl); - strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE); + /** + * only SCMIv3.0 specific bitfield below. + * Such bitfields are assumed to be zeroed on non + * relevant fw versions...assuming fw not buggy ! + */ + s->update = SUPPORTS_UPDATE_NOTIFY(attrl); + s->timestamped = SUPPORTS_TIMESTAMP(attrl); + if (s->timestamped) + s->tstamp_scale = + S32_EXT(SENSOR_TSTAMP_EXP(attrl)); + s->extended_scalar_attrs = + SUPPORTS_EXTEND_ATTRS(attrl); + + attrh = le32_to_cpu(sdesc->attributes_high); + /* common bitfields parsing */ + s->scale = S32_EXT(SENSOR_SCALE(attrh)); + s->type = SENSOR_TYPE(attrh); + /* Use pre-allocated pool wherever possible */ + s->intervals.desc = s->intervals.prealloc_pool; + if (si->version == SCMIv2_SENSOR_PROTOCOL) { + s->intervals.segmented = false; + s->intervals.count = 1; + /* + * Convert SCMIv2.0 update interval format to + * SCMIv3.0 to be used as the common exposed + * descriptor, accessible via common macros. + */ + s->intervals.desc[0] = + (SENSOR_UPDATE_BASE(attrh) << 5) | + SENSOR_UPDATE_SCALE(attrh); + } else { + /* + * From SCMIv3.0 update intervals are retrieved + * via a dedicated (optional) command. + * Since the command is optional, on error carry + * on without any update interval. + */ + if (scmi_sensor_update_intervals(handle, s)) + dev_dbg(handle->dev, + "Update Intervals not available for sensor ID:%d\n", + s->id); + } + /** + * only > SCMIv2.0 specific bitfield below. + * Such bitfields are assumed to be zeroed on non + * relevant fw versions...assuming fw not buggy ! + */ + s->num_axis = min_t(unsigned int, + SUPPORTS_AXIS(attrh) ? + SENSOR_AXIS_NUMBER(attrh) : 0, + SCMI_MAX_NUM_SENSOR_AXIS); + strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE); + + if (s->extended_scalar_attrs) { + s->sensor_power = le32_to_cpu(sdesc->power); + dsize += sizeof(sdesc->power); + /* Only for sensors reporting scalar values */ + if (s->num_axis == 0) { + unsigned int sres = + le32_to_cpu(sdesc->resolution); + + s->resolution = SENSOR_RES(sres); + s->exponent = + S32_EXT(SENSOR_RES_EXP(sres)); + dsize += sizeof(sdesc->resolution); + + scmi_parse_range_attrs(&s->scalar_attrs, + &sdesc->scalar_attrs); + dsize += sizeof(sdesc->scalar_attrs); + } + } + if (s->num_axis > 0) { + ret = scmi_sensor_axis_description(handle, s); + if (ret) + goto out; + } + + sdesc = (typeof(sdesc))((u8 *)sdesc + dsize); } desc_index += num_returned; @@ -174,19 +552,21 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, */ } while (num_returned && num_remaining); +out: scmi_xfer_put(handle, t); return ret; } -static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, - u32 sensor_id, bool enable) +static inline int +scmi_sensor_request_notify(const struct scmi_handle *handle, u32 sensor_id, + u8 message_id, bool enable) { int ret; - u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0; + u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0; struct scmi_xfer *t; - struct scmi_msg_sensor_trip_point_notify *cfg; + struct scmi_msg_sensor_request_notify *cfg; - ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY, + ret = scmi_xfer_get_init(handle, message_id, SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t); if (ret) return ret; @@ -201,6 +581,23 @@ static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, return ret; } +static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, + u32 sensor_id, bool enable) +{ + return scmi_sensor_request_notify(handle, sensor_id, + SENSOR_TRIP_POINT_NOTIFY, + enable); +} + +static int +scmi_sensor_continuous_update_notify(const struct scmi_handle *handle, + u32 sensor_id, bool enable) +{ + return scmi_sensor_request_notify(handle, sensor_id, + SENSOR_CONTINUOUS_UPDATE_NOTIFY, + enable); +} + static int scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, u8 trip_id, u64 trip_value) @@ -227,6 +624,75 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, return ret; } +static int scmi_sensor_config_get(const struct scmi_handle *handle, + u32 sensor_id, u32 *sensor_config) +{ + int ret; + struct scmi_xfer *t; + + ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET, + SCMI_PROTOCOL_SENSOR, sizeof(__le32), + sizeof(__le32), &t); + if (ret) + return ret; + + put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf); + ret = scmi_do_xfer(handle, t); + if (!ret) { + struct sensors_info *si = handle->sensor_priv; + struct scmi_sensor_info *s = si->sensors + sensor_id; + + *sensor_config = get_unaligned_le64(t->rx.buf); + s->sensor_config = *sensor_config; + } + + scmi_xfer_put(handle, t); + return ret; +} + +static int scmi_sensor_config_set(const struct scmi_handle *handle, + u32 sensor_id, u32 sensor_config) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_sensor_config_set *msg; + + ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET, + SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t); + if (ret) + return ret; + + msg = t->tx.buf; + msg->id = cpu_to_le32(sensor_id); + msg->sensor_config = cpu_to_le32(sensor_config); + + ret = scmi_do_xfer(handle, t); + if (!ret) { + struct sensors_info *si = handle->sensor_priv; + struct scmi_sensor_info *s = si->sensors + sensor_id; + + s->sensor_config = sensor_config; + } + + scmi_xfer_put(handle, t); + return ret; +} + +/** + * scmi_sensor_reading_get - Read scalar sensor value + * @handle: Platform handle + * @sensor_id: Sensor ID + * @value: The 64bit value sensor reading + * + * This function returns a single 64 bit reading value representing the sensor + * value; if the platform SCMI Protocol implementation and the sensor support + * multiple axis and timestamped-reads, this just returns the first axis while + * dropping the timestamp value. + * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of + * timestamped multi-axis values. + * + * Return: 0 on Success + */ static int scmi_sensor_reading_get(const struct scmi_handle *handle, u32 sensor_id, u64 *value) { @@ -237,20 +703,24 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, struct scmi_sensor_info *s = si->sensors + sensor_id; ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, - SCMI_PROTOCOL_SENSOR, sizeof(*sensor), - sizeof(u64), &t); + SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); if (ret) return ret; sensor = t->tx.buf; sensor->id = cpu_to_le32(sensor_id); - if (s->async) { sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); ret = scmi_do_xfer_with_response(handle, t); - if (!ret) - *value = get_unaligned_le64((void *) - ((__le32 *)t->rx.buf + 1)); + if (!ret) { + struct scmi_resp_sensor_reading_complete *resp; + + resp = t->rx.buf; + if (le32_to_cpu(resp->id) == sensor_id) + *value = get_unaligned_le64(&resp->readings); + else + ret = -EPROTO; + } } else { sensor->flags = cpu_to_le32(0); ret = scmi_do_xfer(handle, t); @@ -262,6 +732,84 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, return ret; } +static inline void +scmi_parse_sensor_readings(struct scmi_sensor_reading *out, + const struct scmi_sensor_reading_resp *in) +{ + out->value = get_unaligned_le64((void *)&in->sensor_value_low); + out->timestamp = get_unaligned_le64((void *)&in->timestamp_low); +} + +/** + * scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values + * @handle: Platform handle + * @sensor_id: Sensor ID + * @count: The length of the provided @readings array + * @readings: An array of elements each representing a timestamped per-axis + * reading of type @struct scmi_sensor_reading. + * Returned readings are ordered as the @axis descriptors array + * included in @struct scmi_sensor_info and the max number of + * returned elements is min(@count, @num_axis); ideally the provided + * array should be of length @count equal to @num_axis. + * + * Return: 0 on Success + */ +static int +scmi_sensor_reading_get_timestamped(const struct scmi_handle *handle, + u32 sensor_id, u8 count, + struct scmi_sensor_reading *readings) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_sensor_reading_get *sensor; + struct sensors_info *si = handle->sensor_priv; + struct scmi_sensor_info *s = si->sensors + sensor_id; + + if (!count || !readings || + (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis)) + return -EINVAL; + + ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, + SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); + if (ret) + return ret; + + sensor = t->tx.buf; + sensor->id = cpu_to_le32(sensor_id); + if (s->async) { + sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); + ret = scmi_do_xfer_with_response(handle, t); + if (!ret) { + int i; + struct scmi_resp_sensor_reading_complete_v3 *resp; + + resp = t->rx.buf; + /* Retrieve only the number of requested axis anyway */ + if (le32_to_cpu(resp->id) == sensor_id) + for (i = 0; i < count; i++) + scmi_parse_sensor_readings(&readings[i], + &resp->readings[i]); + else + ret = -EPROTO; + } + } else { + sensor->flags = cpu_to_le32(0); + ret = scmi_do_xfer(handle, t); + if (!ret) { + int i; + struct scmi_sensor_reading_resp *resp_readings; + + resp_readings = t->rx.buf; + for (i = 0; i < count; i++) + scmi_parse_sensor_readings(&readings[i], + &resp_readings[i]); + } + } + + scmi_xfer_put(handle, t); + return ret; +} + static const struct scmi_sensor_info * scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id) { @@ -282,6 +830,9 @@ static const struct scmi_sensor_ops sensor_ops = { .info_get = scmi_sensor_info_get, .trip_point_config = scmi_sensor_trip_point_config, .reading_get = scmi_sensor_reading_get, + .reading_get_timestamped = scmi_sensor_reading_get_timestamped, + .config_get = scmi_sensor_config_get, + .config_set = scmi_sensor_config_set, }; static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, @@ -289,7 +840,19 @@ static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, { int ret; - ret = scmi_sensor_trip_point_notify(handle, src_id, enable); + switch (evt_id) { + case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: + ret = scmi_sensor_trip_point_notify(handle, src_id, enable); + break; + case SCMI_EVENT_SENSOR_UPDATE: + ret = scmi_sensor_continuous_update_notify(handle, src_id, + enable); + break; + default: + ret = -EINVAL; + break; + } + if (ret) pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", evt_id, src_id, ret); @@ -302,20 +865,59 @@ static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle, const void *payld, size_t payld_sz, void *report, u32 *src_id) { - const struct scmi_sensor_trip_notify_payld *p = payld; - struct scmi_sensor_trip_point_report *r = report; + void *rep = NULL; + + switch (evt_id) { + case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: + { + const struct scmi_sensor_trip_notify_payld *p = payld; + struct scmi_sensor_trip_point_report *r = report; - if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT || - sizeof(*p) != payld_sz) - return NULL; + if (sizeof(*p) != payld_sz) + break; - r->timestamp = timestamp; - r->agent_id = le32_to_cpu(p->agent_id); - r->sensor_id = le32_to_cpu(p->sensor_id); - r->trip_point_desc = le32_to_cpu(p->trip_point_desc); - *src_id = r->sensor_id; + r->timestamp = timestamp; + r->agent_id = le32_to_cpu(p->agent_id); + r->sensor_id = le32_to_cpu(p->sensor_id); + r->trip_point_desc = le32_to_cpu(p->trip_point_desc); + *src_id = r->sensor_id; + rep = r; + break; + } + case SCMI_EVENT_SENSOR_UPDATE: + { + int i; + struct scmi_sensor_info *s; + const struct scmi_sensor_update_notify_payld *p = payld; + struct scmi_sensor_update_report *r = report; + struct sensors_info *sinfo = handle->sensor_priv; + + /* payld_sz is variable for this event */ + r->sensor_id = le32_to_cpu(p->sensor_id); + if (r->sensor_id >= sinfo->num_sensors) + break; + r->timestamp = timestamp; + r->agent_id = le32_to_cpu(p->agent_id); + s = &sinfo->sensors[r->sensor_id]; + /* + * The generated report r (@struct scmi_sensor_update_report) + * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS + * readings: here it is filled with the effective @num_axis + * readings defined for this sensor or 1 for scalar sensors. + */ + r->readings_count = s->num_axis ?: 1; + for (i = 0; i < r->readings_count; i++) + scmi_parse_sensor_readings(&r->readings[i], + &p->readings[i]); + *src_id = r->sensor_id; + rep = r; + break; + } + default: + break; + } - return r; + return rep; } static const struct scmi_event sensor_events[] = { @@ -324,6 +926,16 @@ static const struct scmi_event sensor_events[] = { .max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld), .max_report_sz = sizeof(struct scmi_sensor_trip_point_report), }, + { + .id = SCMI_EVENT_SENSOR_UPDATE, + .max_payld_sz = + sizeof(struct scmi_sensor_update_notify_payld) + + SCMI_MAX_NUM_SENSOR_AXIS * + sizeof(struct scmi_sensor_reading_resp), + .max_report_sz = sizeof(struct scmi_sensor_update_report) + + SCMI_MAX_NUM_SENSOR_AXIS * + sizeof(struct scmi_sensor_reading), + }, }; static const struct scmi_event_ops sensor_event_ops = { @@ -334,6 +946,7 @@ static const struct scmi_event_ops sensor_event_ops = { static int scmi_sensors_protocol_init(struct scmi_handle *handle) { u32 version; + int ret; struct sensors_info *sinfo; scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); @@ -344,15 +957,19 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL); if (!sinfo) return -ENOMEM; + sinfo->version = version; - scmi_sensor_attributes_get(handle, sinfo); - + ret = scmi_sensor_attributes_get(handle, sinfo); + if (ret) + return ret; sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors, sizeof(*sinfo->sensors), GFP_KERNEL); if (!sinfo->sensors) return -ENOMEM; - scmi_sensor_description_get(handle, sinfo); + ret = scmi_sensor_description_get(handle, sinfo); + if (ret) + return ret; scmi_register_protocol_events(handle, SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ, @@ -360,9 +977,8 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) ARRAY_SIZE(sensor_events), sinfo->num_sensors); - sinfo->version = version; - handle->sensor_ops = &sensor_ops; handle->sensor_priv = sinfo; + handle->sensor_ops = &sensor_ops; return 0; } |