diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ptp/ptp-qoriq.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ptp/ptp-qoriq.txt | 87 |
1 files changed, 0 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt deleted file mode 100644 index 743eda754e65..000000000000 --- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale QorIQ 1588 timer based PTP clock - -General Properties: - - - compatible Should be "fsl,etsec-ptp" for eTSEC - Should be "fsl,fman-ptp-timer" for DPAA FMan - Should be "fsl,dpaa2-ptp" for DPAA2 - Should be "fsl,enetc-ptp" for ENETC - - reg Offset and length of the register set for the device - - interrupts There should be at least two interrupts. Some devices - have as many as four PTP related interrupts. - -Clock Properties: - - - fsl,cksel Timer reference clock source. - - fsl,tclk-period Timer reference clock period in nanoseconds. - - fsl,tmr-prsc Prescaler, divides the output clock. - - fsl,tmr-add Frequency compensation value. - - fsl,tmr-fiper1 Fixed interval period pulse generator. - - fsl,tmr-fiper2 Fixed interval period pulse generator. - - fsl,tmr-fiper3 Fixed interval period pulse generator. - Supported only on DPAA2 and ENETC hardware. - - fsl,max-adj Maximum frequency adjustment in parts per billion. - - fsl,extts-fifo The presence of this property indicates hardware - support for the external trigger stamp FIFO. - - little-endian The presence of this property indicates the 1588 timer - IP block is little-endian mode. The default endian mode - is big-endian. - - These properties set the operational parameters for the PTP - clock. You must choose these carefully for the clock to work right. - Here is how to figure good values: - - TimerOsc = selected reference clock MHz - tclk_period = desired clock period nanoseconds - NominalFreq = 1000 / tclk_period MHz - FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) - tmr_add = ceil(2^32 / FreqDivRatio) - OutputClock = NominalFreq / tmr_prsc MHz - PulseWidth = 1 / OutputClock microseconds - FiperFreq1 = desired frequency in Hz - FiperDiv1 = 1000000 * OutputClock / FiperFreq1 - tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period - max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 - - The calculation for tmr_fiper2 is the same as for tmr_fiper1. The - driver expects that tmr_fiper1 will be correctly set to produce a 1 - Pulse Per Second (PPS) signal, since this will be offered to the PPS - subsystem to synchronize the Linux clock. - - Reference clock source is determined by the value, which is holded - in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the - value, which will be directly written in those bits, that is why, - according to reference manual, the next clock sources can be used: - - For eTSEC, - <0> - external high precision timer reference clock (TSEC_TMR_CLK - input is used for this purpose); - <1> - eTSEC system clock; - <2> - eTSEC1 transmit clock; - <3> - RTC clock input. - - For DPAA FMan, - <0> - external high precision timer reference clock (TMR_1588_CLK) - <1> - MAC system clock (1/2 FMan clock) - <2> - reserved - <3> - RTC clock oscillator - - When this attribute is not used, the IEEE 1588 timer reference clock - will use the eTSEC system clock (for Gianfar) or the MAC system - clock (for DPAA). - -Example: - - ptp_clock@24e00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <12 0x8 13 0x8>; - interrupt-parent = < &ipic >; - fsl,cksel = <1>; - fsl,tclk-period = <10>; - fsl,tmr-prsc = <100>; - fsl,tmr-add = <0x999999A4>; - fsl,tmr-fiper1 = <0x3B9AC9F6>; - fsl,tmr-fiper2 = <0x00018696>; - fsl,max-adj = <659999998>; - }; |