diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ptp')
| -rw-r--r-- | Documentation/devicetree/bindings/ptp/fsl,ptp.yaml | 144 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/ptp/ptp-qoriq.txt | 87 |
2 files changed, 144 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml new file mode 100644 index 000000000000..3bb8615e3e91 --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ptp/fsl,ptp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QorIQ 1588 timer based PTP clock + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,etsec-ptp + - fsl,fman-ptp-timer + - fsl,dpaa2-ptp + - fsl,enetc-ptp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + fsl,cksel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Timer reference clock source. + + Reference clock source is determined by the value, which is holded + in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the + value, which will be directly written in those bits, that is why, + according to reference manual, the next clock sources can be used: + + For eTSEC, + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + For DPAA FMan, + <0> - external high precision timer reference clock (TMR_1588_CLK) + <1> - MAC system clock (1/2 FMan clock) + <2> - reserved + <3> - RTC clock oscillator + + fsl,tclk-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Timer reference clock period in nanoseconds. + + fsl,tmr-prsc: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Prescaler, divides the output clock. + + fsl,tmr-add: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Frequency compensation value. + + fsl,tmr-fiper1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed interval period pulse generator. + + fsl,tmr-fiper2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed interval period pulse generator. + + fsl,tmr-fiper3: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Fixed interval period pulse generator. + Supported only on DPAA2 and ENETC hardware. + + fsl,max-adj: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum frequency adjustment in parts per billion. + + These properties set the operational parameters for the PTP + clock. You must choose these carefully for the clock to work right. + Here is how to figure good values: + + TimerOsc = selected reference clock MHz + tclk_period = desired clock period nanoseconds + NominalFreq = 1000 / tclk_period MHz + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) + tmr_add = ceil(2^32 / FreqDivRatio) + OutputClock = NominalFreq / tmr_prsc MHz + PulseWidth = 1 / OutputClock microseconds + FiperFreq1 = desired frequency in Hz + FiperDiv1 = 1000000 * OutputClock / FiperFreq1 + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 + + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The + driver expects that tmr_fiper1 will be correctly set to produce a 1 + Pulse Per Second (PPS) signal, since this will be offered to the PPS + subsystem to synchronize the Linux clock. + + When this attribute is not used, the IEEE 1588 timer reference clock + will use the eTSEC system clock (for Gianfar) or the MAC system + clock (for DPAA). + + fsl,extts-fifo: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates hardware + support for the external trigger stamp FIFO + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates the 1588 timer + support for the external trigger stamp FIFO. + IP block is little-endian mode. The default endian mode + is big-endian. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + phc@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,cksel = <1>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999a4>; + fsl,tmr-fiper1 = <0x3b9ac9f6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt deleted file mode 100644 index 743eda754e65..000000000000 --- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale QorIQ 1588 timer based PTP clock - -General Properties: - - - compatible Should be "fsl,etsec-ptp" for eTSEC - Should be "fsl,fman-ptp-timer" for DPAA FMan - Should be "fsl,dpaa2-ptp" for DPAA2 - Should be "fsl,enetc-ptp" for ENETC - - reg Offset and length of the register set for the device - - interrupts There should be at least two interrupts. Some devices - have as many as four PTP related interrupts. - -Clock Properties: - - - fsl,cksel Timer reference clock source. - - fsl,tclk-period Timer reference clock period in nanoseconds. - - fsl,tmr-prsc Prescaler, divides the output clock. - - fsl,tmr-add Frequency compensation value. - - fsl,tmr-fiper1 Fixed interval period pulse generator. - - fsl,tmr-fiper2 Fixed interval period pulse generator. - - fsl,tmr-fiper3 Fixed interval period pulse generator. - Supported only on DPAA2 and ENETC hardware. - - fsl,max-adj Maximum frequency adjustment in parts per billion. - - fsl,extts-fifo The presence of this property indicates hardware - support for the external trigger stamp FIFO. - - little-endian The presence of this property indicates the 1588 timer - IP block is little-endian mode. The default endian mode - is big-endian. - - These properties set the operational parameters for the PTP - clock. You must choose these carefully for the clock to work right. - Here is how to figure good values: - - TimerOsc = selected reference clock MHz - tclk_period = desired clock period nanoseconds - NominalFreq = 1000 / tclk_period MHz - FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) - tmr_add = ceil(2^32 / FreqDivRatio) - OutputClock = NominalFreq / tmr_prsc MHz - PulseWidth = 1 / OutputClock microseconds - FiperFreq1 = desired frequency in Hz - FiperDiv1 = 1000000 * OutputClock / FiperFreq1 - tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period - max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 - - The calculation for tmr_fiper2 is the same as for tmr_fiper1. The - driver expects that tmr_fiper1 will be correctly set to produce a 1 - Pulse Per Second (PPS) signal, since this will be offered to the PPS - subsystem to synchronize the Linux clock. - - Reference clock source is determined by the value, which is holded - in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the - value, which will be directly written in those bits, that is why, - according to reference manual, the next clock sources can be used: - - For eTSEC, - <0> - external high precision timer reference clock (TSEC_TMR_CLK - input is used for this purpose); - <1> - eTSEC system clock; - <2> - eTSEC1 transmit clock; - <3> - RTC clock input. - - For DPAA FMan, - <0> - external high precision timer reference clock (TMR_1588_CLK) - <1> - MAC system clock (1/2 FMan clock) - <2> - reserved - <3> - RTC clock oscillator - - When this attribute is not used, the IEEE 1588 timer reference clock - will use the eTSEC system clock (for Gianfar) or the MAC system - clock (for DPAA). - -Example: - - ptp_clock@24e00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <12 0x8 13 0x8>; - interrupt-parent = < &ipic >; - fsl,cksel = <1>; - fsl,tclk-period = <10>; - fsl,tmr-prsc = <100>; - fsl,tmr-add = <0x999999A4>; - fsl,tmr-fiper1 = <0x3B9AC9F6>; - fsl,tmr-fiper2 = <0x00018696>; - fsl,max-adj = <659999998>; - }; |