summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw89/util.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2024-07-16 19:28:34 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2024-07-16 19:28:34 -0700
commit51835949dda3783d4639cfa74ce13a3c9829de00 (patch)
tree2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/wireless/realtek/rtw89/util.c
parent0434dbe32053d07d658165be681505120c6b1abc (diff)
parent77ae5e5b00720372af2860efdc4bc652ac682696 (diff)
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
Diffstat (limited to 'drivers/net/wireless/realtek/rtw89/util.c')
-rw-r--r--drivers/net/wireless/realtek/rtw89/util.c106
1 files changed, 106 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtw89/util.c b/drivers/net/wireless/realtek/rtw89/util.c
new file mode 100644
index 000000000000..e71956ce9853
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/util.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2024 Realtek Corporation
+ */
+
+#include "util.h"
+
+#define FRAC_ROWS 3
+#define FRAC_ROW_MAX (FRAC_ROWS - 1)
+#define NORM_ROW_MIN FRAC_ROWS
+
+static const u32 db_invert_table[12][8] = {
+ /* rows 0~2 in unit of U(32,3) */
+ {10, 13, 16, 20, 25, 32, 40, 50},
+ {64, 80, 101, 128, 160, 201, 256, 318},
+ {401, 505, 635, 800, 1007, 1268, 1596, 2010},
+ /* rows 3~11 in unit of U(32,0) */
+ {316, 398, 501, 631, 794, 1000, 1259, 1585},
+ {1995, 2512, 3162, 3981, 5012, 6310, 7943, 10000},
+ {12589, 15849, 19953, 25119, 31623, 39811, 50119, 63098},
+ {79433, 100000, 125893, 158489, 199526, 251189, 316228, 398107},
+ {501187, 630957, 794328, 1000000, 1258925, 1584893, 1995262, 2511886},
+ {3162278, 3981072, 5011872, 6309573, 7943282, 1000000, 12589254,
+ 15848932},
+ {19952623, 25118864, 31622777, 39810717, 50118723, 63095734, 79432823,
+ 100000000},
+ {125892541, 158489319, 199526232, 251188643, 316227766, 398107171,
+ 501187234, 630957345},
+ {794328235, 1000000000, 1258925412, 1584893192, 1995262315, 2511886432U,
+ 3162277660U, 3981071706U},
+};
+
+u32 rtw89_linear_2_db(u64 val)
+{
+ u8 i, j;
+ u32 dB;
+
+ for (i = 0; i < 12; i++) {
+ for (j = 0; j < 8; j++) {
+ if (i <= FRAC_ROW_MAX &&
+ (val << RTW89_LINEAR_FRAC_BITS) <= db_invert_table[i][j])
+ goto cnt;
+ else if (i > FRAC_ROW_MAX && val <= db_invert_table[i][j])
+ goto cnt;
+ }
+ }
+
+ return 96; /* maximum 96 dB */
+
+cnt:
+ /* special cases */
+ if (j == 0 && i == 0)
+ goto end;
+
+ if (i == NORM_ROW_MIN && j == 0) {
+ if (db_invert_table[NORM_ROW_MIN][0] - val >
+ val - (db_invert_table[FRAC_ROW_MAX][7] >> RTW89_LINEAR_FRAC_BITS)) {
+ i = FRAC_ROW_MAX;
+ j = 7;
+ }
+ goto end;
+ }
+
+ if (i <= FRAC_ROW_MAX)
+ val <<= RTW89_LINEAR_FRAC_BITS;
+
+ /* compare difference to get precise dB */
+ if (j == 0) {
+ if (db_invert_table[i][j] - val >
+ val - db_invert_table[i - 1][7]) {
+ i--;
+ j = 7;
+ }
+ } else {
+ if (db_invert_table[i][j] - val >
+ val - db_invert_table[i][j - 1]) {
+ j--;
+ }
+ }
+end:
+ dB = (i << 3) + j + 1;
+
+ return dB;
+}
+EXPORT_SYMBOL(rtw89_linear_2_db);
+
+u64 rtw89_db_2_linear(u32 db)
+{
+ u64 linear;
+ u8 i, j;
+
+ if (db > 96)
+ db = 96;
+ else if (db < 1)
+ return 1;
+
+ i = (db - 1) >> 3;
+ j = (db - 1) & 0x7;
+
+ linear = db_invert_table[i][j];
+
+ if (i >= NORM_ROW_MIN)
+ linear = linear << RTW89_LINEAR_FRAC_BITS;
+
+ return linear;
+}
+EXPORT_SYMBOL(rtw89_db_2_linear);