diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
commit | 51835949dda3783d4639cfa74ce13a3c9829de00 (patch) | |
tree | 2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/wireless/realtek/rtw89/util.c | |
parent | 0434dbe32053d07d658165be681505120c6b1abc (diff) | |
parent | 77ae5e5b00720372af2860efdc4bc652ac682696 (diff) |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Diffstat (limited to 'drivers/net/wireless/realtek/rtw89/util.c')
-rw-r--r-- | drivers/net/wireless/realtek/rtw89/util.c | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtw89/util.c b/drivers/net/wireless/realtek/rtw89/util.c new file mode 100644 index 000000000000..e71956ce9853 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw89/util.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) 2024 Realtek Corporation + */ + +#include "util.h" + +#define FRAC_ROWS 3 +#define FRAC_ROW_MAX (FRAC_ROWS - 1) +#define NORM_ROW_MIN FRAC_ROWS + +static const u32 db_invert_table[12][8] = { + /* rows 0~2 in unit of U(32,3) */ + {10, 13, 16, 20, 25, 32, 40, 50}, + {64, 80, 101, 128, 160, 201, 256, 318}, + {401, 505, 635, 800, 1007, 1268, 1596, 2010}, + /* rows 3~11 in unit of U(32,0) */ + {316, 398, 501, 631, 794, 1000, 1259, 1585}, + {1995, 2512, 3162, 3981, 5012, 6310, 7943, 10000}, + {12589, 15849, 19953, 25119, 31623, 39811, 50119, 63098}, + {79433, 100000, 125893, 158489, 199526, 251189, 316228, 398107}, + {501187, 630957, 794328, 1000000, 1258925, 1584893, 1995262, 2511886}, + {3162278, 3981072, 5011872, 6309573, 7943282, 1000000, 12589254, + 15848932}, + {19952623, 25118864, 31622777, 39810717, 50118723, 63095734, 79432823, + 100000000}, + {125892541, 158489319, 199526232, 251188643, 316227766, 398107171, + 501187234, 630957345}, + {794328235, 1000000000, 1258925412, 1584893192, 1995262315, 2511886432U, + 3162277660U, 3981071706U}, +}; + +u32 rtw89_linear_2_db(u64 val) +{ + u8 i, j; + u32 dB; + + for (i = 0; i < 12; i++) { + for (j = 0; j < 8; j++) { + if (i <= FRAC_ROW_MAX && + (val << RTW89_LINEAR_FRAC_BITS) <= db_invert_table[i][j]) + goto cnt; + else if (i > FRAC_ROW_MAX && val <= db_invert_table[i][j]) + goto cnt; + } + } + + return 96; /* maximum 96 dB */ + +cnt: + /* special cases */ + if (j == 0 && i == 0) + goto end; + + if (i == NORM_ROW_MIN && j == 0) { + if (db_invert_table[NORM_ROW_MIN][0] - val > + val - (db_invert_table[FRAC_ROW_MAX][7] >> RTW89_LINEAR_FRAC_BITS)) { + i = FRAC_ROW_MAX; + j = 7; + } + goto end; + } + + if (i <= FRAC_ROW_MAX) + val <<= RTW89_LINEAR_FRAC_BITS; + + /* compare difference to get precise dB */ + if (j == 0) { + if (db_invert_table[i][j] - val > + val - db_invert_table[i - 1][7]) { + i--; + j = 7; + } + } else { + if (db_invert_table[i][j] - val > + val - db_invert_table[i][j - 1]) { + j--; + } + } +end: + dB = (i << 3) + j + 1; + + return dB; +} +EXPORT_SYMBOL(rtw89_linear_2_db); + +u64 rtw89_db_2_linear(u32 db) +{ + u64 linear; + u8 i, j; + + if (db > 96) + db = 96; + else if (db < 1) + return 1; + + i = (db - 1) >> 3; + j = (db - 1) & 0x7; + + linear = db_invert_table[i][j]; + + if (i >= NORM_ROW_MIN) + linear = linear << RTW89_LINEAR_FRAC_BITS; + + return linear; +} +EXPORT_SYMBOL(rtw89_db_2_linear); |