diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
| commit | e3950967f6e6b74a3606739ec50ed19f3398c7d8 (patch) | |
| tree | 7e71d022167eca97b96ca3d675a1cbee55b06889 /arch/arm64/boot/dts/qcom | |
| parent | cc0f7c3f97bc6e888bf4be28a9da9dbd3735d2b4 (diff) | |
| parent | 48d2245586452b8279a854970ce82f43477669d3 (diff) | |
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
184 files changed, 17117 insertions, 2561 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f63abb43e9fe..0e5c810304fb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -5,11 +5,13 @@ apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-schneider-hmibsc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb @@ -29,8 +31,13 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-c50.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-m216.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-osprey.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-surnia.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb @@ -93,9 +100,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb @@ -106,6 +115,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb @@ -175,6 +185,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb @@ -241,8 +252,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb + +sm8650-hdk-display-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts new file mode 100644 index 000000000000..75c6137e5a11 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Linaro Ltd. + */ + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Schneider Electric HMIBSC Board"; + compatible = "schneider,apq8016-hmibsc", "qcom,apq8016"; + + aliases { + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + i2c4 = &blsp_i2c3; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + spi0 = &blsp_spi5; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&msm_key_volp_n_default>; + pinctrl-names = "default"; + + button { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pm8916_mpps_leds>; + pinctrl-names = "default"; + + led-1 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + ecc-size = <16>; + }; + }; + + usb-hub { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + adv_bridge: bridge@39 { + compatible = "adi,adv7533"; + reg = <0x39>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + a2vdd-supply = <&pm8916_l6>; + dvdd-supply = <&pm8916_l6>; + pvdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + pinctrl-names = "default","sleep"; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&blsp_spi5 { + cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; + +&blsp_uart1 { + label = "UART0"; + status = "okay"; +}; + +&blsp_uart2 { + label = "UART1"; + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&pm8916_codec { + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM", + "NC", + "NC"; + + usb_hub_reset_pm: usb-hub-reset-pm-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "NC", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "NC"; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + output-low; + }; +}; + +&pm8916_resin { + linux,code = <KEY_POWER>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + model = "HMIBSC"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + status = "okay"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +&tlmm { + pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>; + pinctrl-names = "default"; + + adv7533_int_active: adv533-int-active-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* + * UART1 being the debug console supports various modes of + * operation (RS-232/485/422) controlled via GPIOs configured + * mux as follows: + * + * gpio100 gpio99 UART mode + * 0 0 loopback + * 0 1 RS-232 + * 1 0 RS-485 + * 1 1 RS-422 + * + * The default mode configured here is RS-232 mode. + */ + uart1_mux0_rs232_high: uart1-mux0-rs232-state { + bootph-all; + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + + uart1_mux1_rs232_low: uart1-mux1-rs232-state { + bootph-all; + pins = "gpio100"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; + pinctrl-names = "default", "device"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + firmware-name = "qcom/apq8016/wcnss.mbn"; + status = "okay"; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in msm8916.dtsi */ + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&blsp_i2c4_default { + drive-strength = <16>; +}; + +&blsp_i2c6_default { + drive-strength = <16>; +}; + +&blsp_uart1_default { + bootph-all; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts new file mode 100644 index 000000000000..5bb021cb29cd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "ipq5018.dtsi" + +/ { + model = "TP-Link Archer AX55 v1"; + compatible = "tplink,archer-ax55-v1", "qcom,ipq5018"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN_ONLINE; + gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_WAN; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_USB; + gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + }; + }; + + buttons { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button-reset { + debounce-interval = <60>; + gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + + button-wps { + debounce-interval = <60>; + gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + button_pins: button-pins-state { + pins = "gpio25", "gpio31"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + led_pins: led-pins-state { + pins = "gpio10", "gpio11", "gpio13", "gpio18", "gpio22", + "gpio38", "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + uart_pins: uart-pins-state { + pins = "gpio20", "gpio21"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 32b178b639f0..7e6e2c121979 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -179,7 +179,6 @@ <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; }; tcsr_mutex: hwlock@1905000 { diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 770d9c2fb456..573656587c0d 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -208,7 +208,6 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; clocks = <&xo_board>, <&sleep_clk>, <0>, diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 17ab6c475958..e1e45da7f787 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -396,7 +396,7 @@ }; }; - gcc: gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq6018"; reg = <0x0 0x01800000 0x0 0x80000>; clocks = <&xo>, <&sleep_clk>; @@ -457,6 +457,25 @@ }; }; + sdhc: mmc@7804000 { + compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x07804000 0x0 0x1000>, + <0x0 0x07805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <192000000>; + status = "disabled"; + }; + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; @@ -685,6 +704,7 @@ clocks = <&xo>; clock-names = "ref"; tx-fifo-resize; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -923,7 +943,6 @@ thermal-zones { nss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; trips { @@ -937,7 +956,6 @@ nss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; trips { @@ -951,7 +969,6 @@ wcss-phya0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; trips { @@ -979,7 +996,6 @@ cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 13>; trips { @@ -1009,7 +1025,6 @@ lpass-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 14>; trips { @@ -1023,7 +1038,6 @@ ddrss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5d42de829e75..284a4553070f 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -363,7 +363,7 @@ }; }; - gcc: gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; clocks = <&xo>, @@ -666,6 +666,7 @@ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -715,6 +716,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -982,7 +984,6 @@ thermal-zones { nss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -997,7 +998,6 @@ nss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -1012,7 +1012,6 @@ nss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -1027,7 +1026,6 @@ wcss-phya0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -1042,7 +1040,6 @@ wcss-phya1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -1057,7 +1054,6 @@ cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; @@ -1072,7 +1068,6 @@ cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 10>; @@ -1087,7 +1082,6 @@ cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 11>; @@ -1102,7 +1096,6 @@ cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 12>; @@ -1117,7 +1110,6 @@ cluster_thermal: cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 13>; @@ -1132,7 +1124,6 @@ wcss-phyb0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 14>; @@ -1147,7 +1138,6 @@ wcss-phyb1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 15>; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 7f2e5cbf3bbb..48dfafea46a7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interconnect/qcom,ipq9574.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> #include <dt-bindings/thermal/thermal.h> @@ -232,6 +233,16 @@ clock-names = "core"; }; + mdio: mdio@90000 { + compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x5a1>; @@ -305,7 +316,7 @@ <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; + #interconnect-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -749,8 +760,6 @@ thermal-zones { nss-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 3>; trips { @@ -763,8 +772,6 @@ }; ubi-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 4>; trips { @@ -777,8 +784,6 @@ }; ubi-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 5>; trips { @@ -791,8 +796,6 @@ }; ubi-2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 6>; trips { @@ -805,8 +808,6 @@ }; ubi-3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 7>; trips { @@ -819,8 +820,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 8>; trips { @@ -833,8 +832,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 9>; trips { @@ -847,8 +844,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 10>; trips { @@ -877,8 +872,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 11>; trips { @@ -907,8 +900,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 12>; trips { @@ -937,8 +928,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 13>; trips { @@ -967,8 +956,6 @@ }; wcss-phyb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 14>; trips { @@ -981,8 +968,6 @@ }; top-glue-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts index 366914be7d53..fba68bf8bf79 100644 --- a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts +++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts @@ -9,3 +9,17 @@ compatible = "samsung,fortuna3g", "qcom,msm8916"; chassis-type = "handset"; }; + +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&st_accel { + status = "okay"; +}; + +&st_magn { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index b32c7a97394d..b4ce14a79370 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -135,6 +136,17 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x4500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <150 237 450 500 590>; + qcom,mbhc-vthreshold-high = <150 237 450 500 590>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -170,6 +182,20 @@ status = "okay"; }; +&sound { + model = "acer-a1-724"; + audio-routing = + "DMIC1", "MIC BIAS External1", + "DMIC1", "Digital Mic1", + "AMIC2", "MIC BIAS Internal2", + "DMIC2", "MIC BIAS External1", + "DMIC2", "Digital Mic2"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>; + pinctrl-names = "default", "sleep"; +}; + &usb { extcon = <&usb_id>, <&usb_id>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index b748d140b52e..f7be7e371820 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -23,6 +24,28 @@ stdout-path = "serial0"; }; + battery: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + voltage-min-design-microvolt = <3700000>; + voltage-max-design-microvolt = <4200000>; + energy-full-design-microwatt-hours = <13690000>; + charge-full-design-microamp-hours = <3700000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = + <4186000 100>, <4126000 95>, <4078000 90>, + <4036000 85>, <3997000 80>, <3962000 75>, + <3932000 70>, <3904000 65>, <3874000 60>, + <3839000 55>, <3809000 50>, <3792000 45>, + <3780000 40>, <3772000 35>, <3764000 30>, + <3752000 25>, <3731000 20>, <3704000 16>, + <3677000 13>, <3670000 11>, <3668000 10>, + <3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>, + <3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>, + <3310000 1>, <3000000 0>; + }; + flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; @@ -111,6 +134,22 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_bms { + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <150 180 237 450 500>; + qcom,mbhc-vthreshold-high = <150 180 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -141,6 +180,14 @@ status = "okay"; }; +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { extcon = <&usb_id>, <&usb_id>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts new file mode 100644 index 000000000000..a823a1c40208 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "LG Leon LTE"; + compatible = "lg,c50", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down-button { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <5000>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts new file mode 100644 index 000000000000..07345e694f6f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "LG K10 (K420n)"; + compatible = "lg,m216", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3300000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <8800000>; + charge-full-design-microamp-hours = <2300000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>, + <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>, + <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>, + <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>, + <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>, + <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>, + <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>, + <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down-button { + label = "Volume Down"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@11 { + compatible = "bosch,bmc150_accel"; + reg = <0x11>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; + + magnetometer@13 { + compatible = "bosch,bmc150_magn"; + reg = <0x13>; + + interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&magn_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x4a00000>; +}; + +&pm8916_bms { + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; + + status = "okay"; +}; + +&pm8916_charger { + qcom,fast-charge-safe-current = <700000>; + qcom,fast-charge-safe-voltage = <4300000>; + + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_charger>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_charger>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + magn_int_default: magn-int-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ce-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi new file mode 100644 index 000000000000..6a27d0ecd2ad --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-1 = <&usb_id_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + touchscreen: touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + vio-supply = <&pm8916_l6>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <1>; + syna,nosleep-mode = <1>; /* Allow sleeping */ + }; + + rmi4-f11@11 { + reg = <11>; + syna,sensor-type = <1>; /* Touchscreen */ + }; + }; +}; + +&blsp_uart1 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +/* CTS/RTX are not used */ +&blsp_uart1_default { + pins = "gpio0", "gpio1"; +}; +&blsp_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_id_sleep: usb-id-sleep-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts new file mode 100644 index 000000000000..8380451ebbf6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto G4 Play"; + compatible = "motorola,harpia", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + }; + + /* charger@6b */ +}; + +&blsp_i2c4 { + status = "okay"; + + accelerometer@19 { + compatible = "bosch,bma253"; + reg = <0x19>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>, + <&tlmm 119 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; + + /* proximity@49 */ +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &headset_switch_supply_en + &headset_switch_in>; + pinctrl-1 = <&cdc_pdm_sleep &headset_switch_supply_en + &headset_switch_in>; + pinctrl-names = "default", "sleep"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115", "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + battery_alert_default: battery-alert-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + headset_switch_in: headset-switch-in-state { + pins = "gpio112"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + headset_switch_supply_en: headset-switch-supply-en-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio118"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts new file mode 100644 index 000000000000..ec5589fc69bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto G 2015"; + compatible = "motorola,osprey", "qcom,msm8916"; + chassis-type = "handset"; + + reg_touch_vdda: regulator-touch-vdda { + compatible = "regulator-fixed"; + regulator-name = "touch_vdda"; + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&touch_vdda_default>; + pinctrl-names = "default"; + startup-delay-us = <300>; + vin-supply = <&pm8916_l16>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + }; +}; + +&blsp_i2c6 { + /* magnetometer@c */ +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_touch_vdda>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + battery_alert_default: battery-alert-default-state { + pins = "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch_vdda_default: touch-vdda-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts new file mode 100644 index 000000000000..eecf78ba45bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-motorola-common.dtsi" + +/ { + model = "Motorola Moto E 2015 LTE"; + compatible = "motorola,surnia", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&battery_alert_default>; + pinctrl-names = "default"; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + }; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; +}; + +&touchscreen { + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; +}; + +&tlmm { + battery_alert_default: battery-alert-default-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 4bbbee80b5e4..e6355e5e2177 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -28,6 +28,12 @@ }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -245,7 +251,7 @@ &blsp_i2c4 { status = "okay"; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; interrupt-parent = <&tlmm>; @@ -253,6 +259,44 @@ pinctrl-names = "default"; pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&charger>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; }; }; @@ -476,6 +520,13 @@ bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 3b934f5eba47..906d31f1ea21 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -55,6 +55,12 @@ "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 391befa22bb4..fe39be7a742b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -29,6 +29,12 @@ "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts index fad2535255f7..800cb1038da0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -23,6 +23,12 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts index b412b61ca258..ec1debd2e245 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -23,6 +23,13 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + + &pm8916_l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index 5e933fb8b363..81b3e0760154 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { aliases { @@ -26,6 +27,12 @@ }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm_backlight: backlight { compatible = "pwm-backlight"; pwms = <&clk_pwm 0 100000>; @@ -78,6 +85,35 @@ max-microvolt = <3300000>; }; + i2c_nfc: i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&nfc_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5_nfc: nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + reg_motor_vdd: regulator-motor-vdd { compatible = "regulator-fixed"; regulator-name = "motor_vdd"; @@ -114,6 +150,82 @@ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; +}; + +&blsp_i2c2 { + /* Available sensors vary depending on model variant */ + status = "okay"; + + bosch_accel: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + bosch_magn: magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + status = "disabled"; + }; + + st_accel: accelerometer@1d { + compatible = "st,lsm303c-accel"; + reg = <0x1d>; + interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; + }; + + st_magn: magnetometer@1e { + compatible = "st,lsm303c-magn"; + reg = <0x1e>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; + + status = "disabled"; }; }; @@ -128,6 +240,8 @@ pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -151,6 +265,42 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -223,6 +373,13 @@ }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + backlight_en_default: backlight-en-default-state { pins = "gpio98"; function = "gpio"; @@ -263,6 +420,36 @@ bias-disable; }; + nfc_default: nfc-default-state { + irq-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + nfc_i2c_default: nfc-i2c-default-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; @@ -284,3 +471,13 @@ bias-disable; }; }; + +&pm8916_gpios { + nfc_clk_req: nfc-clk-req-state { + pins = "gpio2"; + function = "func1"; + power-source = <PM8916_GPIO_L2>; + bias-disable; + input-enable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts index 9d65fa58ba92..677e4e286ac0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -21,6 +21,76 @@ }; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&bosch_accel { + status = "okay"; +}; + +&bosch_magn { + status = "okay"; +}; + +&blsp_i2c6 { + /* pmic@34 is on i2c_nfc instead */ + /delete-node/ pmic@34; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + }; +}; + +&i2c_nfc { + /* nfc@27 is on &blsp_i2c6 */ + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &mpss_mem { /* Firmware for gprimeltecan needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 5882b3a593b8..135df1739dbd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -41,6 +41,12 @@ }; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + ®_motor_vdd { gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts index a66ce4b13547..582bfcb09684 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts @@ -10,6 +10,20 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&bosch_accel { + status = "okay"; +}; + +&bosch_magn { + status = "okay"; +}; + &mpss_mem { /* Firmware for grandprimelte needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index b438fa81886c..e7f265e3c2ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -15,6 +15,12 @@ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; @@ -26,3 +32,15 @@ &clk_pwm_backlight { status = "disabled"; }; + +&s3fwrn5_nfc { + status = "okay"; +}; + +&st_accel { + compatible = "st,lis2hh12"; + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index ebaa13c6b016..1981bb71f6a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -10,6 +10,12 @@ chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <700000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index cedff4166bfb..7383bcc603ab 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -308,7 +308,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -360,7 +360,7 @@ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -385,7 +385,7 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -410,8 +410,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -1978,7 +1977,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,remote-pid = <1>; label = "hexagon"; @@ -2459,7 +2458,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -2626,7 +2625,6 @@ thermal-zones { cpu0-1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2656,7 +2654,6 @@ cpu2-3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -2686,7 +2683,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2713,7 +2709,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -2728,7 +2723,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index 0c599e71a464..91acdb160227 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -33,6 +33,15 @@ }; }; + battery: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4300000>; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + gpio-hall-sensor { compatible = "gpio-keys"; @@ -82,7 +91,7 @@ #address-cells = <1>; #size-cells = <0>; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; @@ -91,6 +100,8 @@ pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -325,6 +336,42 @@ }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -510,6 +557,13 @@ bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index dd45975682b2..46d9480cd464 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -248,7 +248,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs1_mbox 8 0>; + mboxes = <&apcs1_mbox 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -443,8 +443,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs1_mbox 8 13>; - qcom,ipc-3 = <&apcs1_mbox 8 19>; + mboxes = <0>, <&apcs1_mbox 13>, <0>, <&apcs1_mbox 19>; apps_smsm: apps@0 { reg = <0>; @@ -2067,7 +2066,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs1_mbox 8 17>; + mboxes = <&apcs1_mbox 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -2299,7 +2298,6 @@ thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2330,7 +2328,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -2361,7 +2358,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -2392,7 +2388,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -2423,7 +2418,6 @@ cpu4567-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; @@ -2454,7 +2448,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -2482,7 +2475,6 @@ modem1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -2497,7 +2489,6 @@ modem2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2512,7 +2503,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts index 711d84dad9d7..2edf804eb7c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts @@ -301,5 +301,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts index a5957e79b818..336b916729e4 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -321,5 +321,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts index 6b9245cd8b0c..bdf1bfc79c56 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -326,5 +326,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts index 9ac4f507e321..fccb9c4360ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts @@ -322,5 +322,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts index b0588f30f8f1..d46325e79917 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -357,5 +357,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 5d818fe057dd..a4bfb624fb8a 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -195,7 +195,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -361,7 +361,7 @@ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -386,7 +386,7 @@ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -411,8 +411,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -1267,7 +1266,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,remote-pid = <1>; label = "modem"; @@ -1748,7 +1747,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; @@ -1968,8 +1967,9 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { cpu0_alert: trip-point0 { temperature = <80000>; @@ -1991,8 +1991,9 @@ }; cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { cpu1_alert: trip-point0 { temperature = <80000>; @@ -2014,8 +2015,9 @@ }; cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { cpu2_alert: trip-point0 { temperature = <80000>; @@ -2037,8 +2039,9 @@ }; cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { cpu3_alert: trip-point0 { temperature = <80000>; @@ -2060,7 +2063,6 @@ }; cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; trips { cpu4_alert: trip-point0 { @@ -2083,7 +2085,6 @@ }; cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; trips { cpu5_alert: trip-point0 { @@ -2106,7 +2107,6 @@ }; cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; trips { cpu6_alert: trip-point0 { @@ -2129,7 +2129,6 @@ }; cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; trips { cpu7_alert: trip-point0 { @@ -2153,7 +2152,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi index 668e05185c21..fa36b62156bb 100644 --- a/arch/arm64/boot/dts/qcom/msm8956.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi @@ -8,8 +8,8 @@ #include "msm8976.dtsi" -&pmu { - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; +&pmu_a72 { + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0x30) | IRQ_TYPE_LEVEL_HIGH)>; }; &tsens { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index d2bb1ada361a..d62dcb76fa48 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -222,11 +222,17 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - pmu: pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + pmu_a72: pmu-a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0xf0) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -237,7 +243,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -361,7 +367,7 @@ smp2p-hexagon { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -384,7 +390,7 @@ smp2p-modem { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -407,7 +413,7 @@ smp2p-wcnss { compatible = "qcom,smp2p"; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -433,9 +439,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -771,6 +775,36 @@ drive-strength = <2>; bias-disable; }; + + wcss_wlan_default: wcss-wlan-default-state { + wcss-wlan2-pins { + pins = "gpio40"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio41"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio42"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { @@ -785,10 +819,10 @@ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&rpmcc RPM_SMD_XO_A_CLK_SRC>, - <0>, - <0>, - <0>, - <0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; clock-names = "xo", "xo_a", "dsi0pll", @@ -808,6 +842,430 @@ reg = <0x01937000 0x30000>; }; + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@1a01000 { + compatible = "qcom,msm8976-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDP_TBU_CLK>, + <&gcc GCC_MDP_RT_TBU_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync", + "tbu", + "tbu_rt"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + iommus = <&apps_iommu 22>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + mdss_mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-177780000 { + opp-hz = /bits/ 64 <177780000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-360000000 { + opp-hz = /bits/ 64 <360000000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>, + <&gcc GCC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-161250000 { + opp-hz = /bits/ 64 <161250000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>, + <&gcc GCC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + phys = <&mdss_dsi1_phy>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdss_mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94a00 { + compatible = "qcom,dsi-phy-28nm-hpm-fam-b"; + reg = <0x01a94a00 0xd4>, + <0x01a94400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1_phy: phy@1a96a00 { + compatible = "qcom,dsi-phy-28nm-hpm-fam-b"; + reg = <0x01a96a00 0xd4>, + <0x01a96400 0x280>, + <0x01a96b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + adreno_gpu: gpu@1c00000 { + compatible = "qcom,adreno-510.0", "qcom,adreno"; + + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&gcc GCC_GFX3D_OXILI_CLK>, + <&gcc GCC_GFX3D_OXILI_AHB_CLK>, + <&gcc GCC_GFX3D_OXILI_GMEM_CLK>, + <&gcc GCC_GFX3D_BIMC_CLK>, + <&gcc GCC_GFX3D_OXILI_TIMER_CLK>, + <&gcc GCC_GFX3D_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "rbbmtimer", + "alwayson"; + + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&gpu_iommu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-supported-hw = <0xff>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmpd_opp_svs>; + opp-supported-hw = <0xff>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + required-opps = <&rpmpd_opp_nom>; + opp-supported-hw = <0xff>; + }; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + required-opps = <&rpmpd_opp_nom_plus>; + opp-supported-hw = <0xff>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmpd_opp_turbo>; + opp-supported-hw = <0xff>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmpd_opp_turbo>; + opp-supported-hw = <0xff>; + }; + }; + }; + + apps_iommu: iommu@1ee0000 { + compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2"; + reg = <0x01ee0000 0x3000>; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + + /* VFE */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x15000 0x1000>; + qcom,ctx-asid = <20>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x16000 0x1000>; + qcom,ctx-asid = <21>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP0 */ + iommu-ctx@17000 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x17000 0x1000>; + qcom,ctx-asid = <22>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2"; + ranges = <0 0x01f08000 0x8000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX3D_TCU_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&gcc OXILI_CX_GDSC>; + + qcom,iommu-secure-id = <18>; + + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + + /* gfx3d user */ + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x0 0x1000>; + qcom,ctx-asid = <0>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d secure */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x1000 0x1000>; + qcom,ctx-asid = <2>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d priv */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x2000 0x1000>; + qcom,ctx-asid = <1>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x1000>, @@ -1034,6 +1492,81 @@ status = "disabled"; }; + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", + "dxe", + "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + power-domains = <&rpmpd MSM8976_VDDCX>, + <&rpmpd MSM8976_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcss_wlan_default>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; @@ -1124,7 +1657,6 @@ thermal-zones { aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -1139,7 +1671,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; trips { @@ -1153,7 +1684,6 @@ qdsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; trips { @@ -1167,7 +1697,6 @@ cam-isp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; trips { @@ -1181,7 +1710,7 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 4>; trips { @@ -1205,7 +1734,7 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 5>; trips { @@ -1229,7 +1758,7 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 6>; trips { @@ -1253,7 +1782,7 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 7>; trips { @@ -1277,7 +1806,7 @@ big-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 8>; trips { @@ -1301,7 +1830,7 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 9>; trips { @@ -1325,7 +1854,7 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; + thermal-sensors = <&tsens 10>; trips { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 695e541832ad..917fa246857d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -183,7 +183,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; qcom,remote-pid = <6>; @@ -300,7 +300,7 @@ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -325,7 +325,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -1093,10 +1093,10 @@ timer: timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 0xff08>, - <GIC_PPI 3 0xff08>, - <GIC_PPI 4 0xff08>, - <GIC_PPI 1 0xff08>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; vph_pwr: vph-pwr-regulator { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 5ab583be9e0a..0386636a29f0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -405,7 +405,6 @@ &hsusb_phy1 { status = "okay"; - extcon = <&typec>; vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8d2cb6f41095..0fd2b1b944a5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -982,6 +982,8 @@ <&mmcc MDSS_MDP_CLK>; clock-names = "iface", "core"; + resets = <&mmcc MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; ranges; @@ -2077,24 +2079,20 @@ power-domains = <&gcc UFS_GDSC>; clock-names = - "core_clk_src", "core_clk", "bus_clk", "bus_aggr_clk", "iface_clk", - "core_clk_unipro_src", "core_clk_unipro", "core_clk_ice", "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk"; clocks = - <&gcc UFS_AXI_CLK_SRC>, <&gcc GCC_UFS_AXI_CLK>, <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_UFS_AHB_CLK>, - <&gcc UFS_ICE_CORE_CLK_SRC>, <&gcc GCC_UFS_UNIPRO_CORE_CLK>, <&gcc GCC_UFS_ICE_CORE_CLK>, <&rpmcc RPM_SMD_LN_BB_CLK>, @@ -2105,10 +2103,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>, - <150000000 300000000>, <75000000 150000000>, - <0 0>, + <150000000 300000000>, <0 0>, <0 0>, <0 0>; @@ -2483,6 +2479,13 @@ status = "disabled"; + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apcs_glb 27>; + }; + smd-edge { interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; @@ -2552,6 +2555,13 @@ memory-region = <&mdata_mem>; }; + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + smd-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; @@ -3091,6 +3101,7 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; snps,is-utmi-l1-suspend; + snps,parkmode-disable-ss-quirk; tx-fifo-resize; }; }; @@ -3497,6 +3508,14 @@ status = "disabled"; + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 9>; + }; + + smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; @@ -3553,6 +3572,63 @@ }; }; }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&lpass_q6_smmu 5>; + }; + + cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&lpass_q6_smmu 6>; + }; + + cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&lpass_q6_smmu 7>; + }; + + cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&lpass_q6_smmu 8>; + }; + + cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&lpass_q6_smmu 9>; + }; + + cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&lpass_q6_smmu 10>; + }; + + cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&lpass_q6_smmu 11>; + }; + + cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&lpass_q6_smmu 12>; + }; + }; }; }; @@ -3654,7 +3730,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3675,7 +3750,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -3696,7 +3770,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3717,7 +3790,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -3738,7 +3810,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -3760,7 +3831,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -3782,7 +3852,6 @@ m4m-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3797,7 +3866,6 @@ l3-or-venus-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3812,7 +3880,6 @@ cluster0-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3827,7 +3894,6 @@ cluster1-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -3842,7 +3908,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -3857,7 +3922,6 @@ q6-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -3872,7 +3936,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -3887,7 +3950,6 @@ modemtx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d795b2bbe133..7f44807b1b97 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -488,7 +488,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -509,7 +508,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -530,7 +528,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -551,7 +548,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -572,7 +568,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -593,7 +588,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -614,7 +608,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -635,7 +628,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -656,7 +648,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -671,7 +662,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -686,7 +676,6 @@ clust0-mhm-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -701,7 +690,6 @@ clust1-mhm-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -716,7 +704,6 @@ cluster1-l2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -731,7 +718,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -746,7 +732,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -761,7 +746,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -776,7 +760,6 @@ q6-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -791,7 +774,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -806,7 +788,6 @@ multimedia-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -1590,7 +1571,6 @@ * SoC VDDMX RPM Power Domain in the Adreno driver. */ power-domains = <&gpucc GPU_GX_GDSC>; - status = "disabled"; }; gpucc: clock-controller@5065000 { @@ -2164,6 +2144,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; @@ -3020,6 +3001,54 @@ }; }; + venus: video-codec@cc00000 { + compatible = "qcom,msm8998-venus"; + reg = <0x0cc00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VIDEO_TOP_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_mem>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; @@ -3195,6 +3224,7 @@ iommus = <&anoc2_smmu 0x1900>, <&anoc2_smmu 0x1901>; qcom,snoc-host-cap-8bit-quirk; + qcom,no-msa-ready-indicator; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi index 99369a0cdb61..d0db28336fa9 100644 --- a/arch/arm64/boot/dts/qcom/pm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm6125-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm6125_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 6de6ed562d97..59524609fb1e 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -13,7 +13,7 @@ thermal-zones { pm6150_thermal: pm6150-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; trips { @@ -166,5 +166,11 @@ reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm6150_vib: vibrator@5300 { + compatible = "qcom,pm6150-vib", "qcom,pmi632-vib"; + reg = <0x5300>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 0fce45276e5c..334f976f1154 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -10,9 +10,6 @@ / { thermal-zones { pm6150l-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150l_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index 3a2a841e83f1..a20ee2457101 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm6350-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm6350_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index 98dc04962fe3..156b2ddff0dc 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm660-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm660_temp>; @@ -74,6 +73,23 @@ }; }; + pm660_charger: charger@1000 { + compatible = "qcom,pm660-charger"; + reg = <0x1000>; + + interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pm660_rradc 3>, + <&pm660_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pm660_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -181,6 +197,14 @@ }; }; + pm660_rradc: adc@4500 { + compatible = "qcom,pm660-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; + pm660_gpios: gpio@c000 { compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 6fdbf507c262..0094e0ef058b 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm660l-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm660l_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index 3bf7cf5d1700..0761e6b5fd8d 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -11,7 +11,6 @@ thermal-zones { pm7250b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm7250b_temp>; @@ -45,6 +44,52 @@ #address-cells = <1>; #size-cells = <0>; + pm7250b_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm7250b_typec: typec@1500 { + compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + interrupts = <PM7250B_SID 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + vdd-vbus-supply = <&pm7250b_vbus>; + status = "disabled"; + }; + pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi index d1c5476af5ee..6e29468505b2 100644 --- a/arch/arm64/boot/dts/qcom/pm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -35,7 +35,7 @@ &thermal_zones { pm7325_thermal: pm7325-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm7325_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi index 8b00ece987d1..853a1d83a7f0 100644 --- a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm7550ba-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm7550ba_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi index 0ea641e12209..ef330194946b 100644 --- a/arch/arm64/boot/dts/qcom/pm8010.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8010-m-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8010_m_temp_alarm>; @@ -31,7 +30,6 @@ pm8010-n-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8010_n_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 3ba3ba5d8fce..a74a7ff660d2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -13,7 +13,6 @@ thermal-zones { pm8150-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 1aee3270ce7b..3f7b0b6a1d10 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -12,7 +12,6 @@ thermal-zones { pm8150b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150b_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index ac08a09c64c2..3911d6d0d2e2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -12,7 +12,6 @@ thermal-zones { pm8150l-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8150l_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi index 9ed9ba23e81e..cb55b23688d6 100644 --- a/arch/arm64/boot/dts/qcom/pm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi @@ -10,7 +10,7 @@ thermal-zones { pm8350_thermal: pm8350-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi index 05c105898892..cf82f8a64a9b 100644 --- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi @@ -10,7 +10,7 @@ thermal-zones { pm8350b_thermal: pm8350b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index aa74e21fe0dc..1a24e6439e36 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -48,7 +48,7 @@ thermal-zones { pm8350c_thermal: pm8350c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi index ae5bce3cf46e..decb8809fd36 100644 --- a/arch/arm64/boot/dts/qcom/pm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8450-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8450_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 797a18c249a4..896bcacb6490 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi index 72609f31c890..74d23b8970f4 100644 --- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550b_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi index 4dc1f03ab2c7..9d4734eabf5a 100644 --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550ve-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550ve_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi index 97b1c18aa7d8..6426b431616b 100644 --- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi @@ -10,7 +10,6 @@ thermal-zones { pm8550vs-c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_c_temp_alarm>; @@ -31,7 +30,6 @@ pm8550vs-d-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_d_temp_alarm>; @@ -52,7 +50,6 @@ pm8550vs-e-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_e_temp_alarm>; @@ -73,7 +70,6 @@ pm8550vs-g-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm8550vs_g_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 4b2e8fb47d2d..f8e4829ff7f7 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -4,8 +4,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> -&spmi_bus { +/ { + thermal-zones { + pm8916-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8916_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; +&spmi_bus { pm8916_0: pmic@0 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index 1067e141be6c..64258505f9ba 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -9,9 +9,6 @@ / { thermal-zones { pm8953-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8953_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index d44a95caf04a..353e4a6bd088 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -8,7 +8,6 @@ thermal-zones { pm8994-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm8994_temp>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 3f82715392c6..3ecb330590e5 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -11,7 +11,6 @@ thermal-zones { pm8998-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pm8998_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi index 94d53b1cf6c8..8c899d148e46 100644 --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -11,7 +11,6 @@ thermal-zones { pmi632-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmi632_temp>; @@ -200,5 +199,11 @@ status = "disabled"; }; + + pmi632_vib: vibrator@5700 { + compatible = "qcom,pmi632-vib"; + reg = <0x5700>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 1029f3b1bb9a..b4822cb17a37 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -84,6 +84,14 @@ #address-cells = <1>; #size-cells = <0>; + pmi8950_pwm: pwm@b000 { + compatible = "qcom,pmi8950-pwm"; + reg = <0xb000 0x100>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8950_wled: leds@d800 { compatible = "qcom,pmi8950-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index dbd4b91dfe06..5084de66fc46 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -12,7 +12,6 @@ thermal-zones { pmm8155au-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmm8155au_1_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index 1cee20ac2c9c..555e4a456ef1 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -11,7 +11,6 @@ thermal-zones { pmm8155au-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmm8155au_2_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi index febda50779f9..f8efd8e5e68f 100644 --- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi @@ -36,7 +36,7 @@ thermal-zones { pmr735a_thermal: pmr735a-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi index f7473e247322..09affc05b397 100644 --- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi @@ -10,7 +10,7 @@ thermal-zones { pmr735b_thermal: pmr735b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi index 37daaefe3431..f9f1793d310e 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmr735d-k-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmr735d_k_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi index 3b470f6ac46f..d91fbd3bff10 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmr735d-l-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmr735d_l_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 461ad97032f7..3f9100c7eff4 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -12,7 +12,6 @@ thermal-zones { pms405-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&pms405_temp>; diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi index 373e45f63dff..2e61b7849c92 100644 --- a/arch/arm64/boot/dts/qcom/pmx75.dtsi +++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi @@ -10,7 +10,6 @@ thermal-zones { pmx75-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmx75_temp_alarm>; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index 106110a9f551..8f3be4c75db3 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,qcm2290-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -758,6 +759,11 @@ reg = <0x25b 0x1>; bits = <1 4>; }; + + gpu_speed_bin: gpu-speed-bin@2006 { + reg = <0x2006 0x2>; + bits = <5 8>; + }; }; pmu@1b8e300 { @@ -1425,6 +1431,154 @@ }; }; + gpu: gpu@5900000 { + compatible = "qcom,adreno-07000200", "qcom,adreno"; + reg = <0x0 0x05900000 0x0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_BIMC_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "gmu", + "xo"; + + interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "gfx-mem"; + + iommus = <&adreno_smmu 0 1>, + <&adreno_smmu 2 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + qcom,gmu = <&gmu_wrapper>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; + + status = "disabled"; + + zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */ + opp-1123200000 { + opp-hz = /bits/ 64 <1123200000>; + required-opps = <&rpmpd_opp_turbo_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + required-opps = <&rpmpd_opp_turbo>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-921600000 { + opp-hz = /bits/ 64 <921600000>; + required-opps = <&rpmpd_opp_nom_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + }; + + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x7>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <3879000>; + opp-supported-hw = <0xf>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <2929000>; + opp-supported-hw = <0xf>; + }; + + opp-355200000 { + opp-hz = /bits/ 64 <355200000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <1720000>; + opp-supported-hw = <0xf>; + }; + }; + }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0 0x0596a000 0x0 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,qcm2290-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + power-domains = <&rpmpd QCM2290_VDDCX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; @@ -1924,9 +2078,6 @@ thermal-zones { mapss-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -1951,9 +2102,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -1978,9 +2126,6 @@ }; wlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -2005,9 +2150,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -2032,9 +2174,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -2059,9 +2198,6 @@ }; mdm0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -2086,9 +2222,6 @@ }; mdm1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -2113,9 +2246,6 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -2140,9 +2270,6 @@ }; hm-center-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2167,9 +2294,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index f3432701945f..8ab30c01712e 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -167,7 +167,7 @@ thermal-zones { camera-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -181,7 +181,7 @@ chg-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -195,7 +195,7 @@ conn-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -207,9 +207,28 @@ }; }; + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + quiet-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -223,7 +242,7 @@ rear-cam-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -237,7 +256,7 @@ sdm-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -251,7 +270,7 @@ xo-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -271,46 +290,54 @@ qcom,pmic-id = "b"; vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; regulator-min-microvolt = <1840000>; regulator-max-microvolt = <2040000>; }; vreg_s7b: smps7 { + regulator-name = "vreg_s7b"; regulator-min-microvolt = <535000>; regulator-max-microvolt = <1120000>; }; vreg_s8b: smps8 { + regulator-name = "vreg_s8b"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; }; vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; regulator-min-microvolt = <825000>; regulator-max-microvolt = <925000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; regulator-min-microvolt = <312000>; regulator-max-microvolt = <910000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; /* Constrained for UFS VCC, at least until UFS driver scales voltage */ regulator-min-microvolt = <2952000>; regulator-max-microvolt = <2952000>; @@ -318,66 +345,77 @@ }; vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; regulator-min-microvolt = <870000>; regulator-max-microvolt = <970000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; regulator-min-microvolt = <765000>; regulator-max-microvolt = <1020000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -389,60 +427,70 @@ qcom,pmic-id = "c"; vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; regulator-min-microvolt = <2190000>; regulator-max-microvolt = <2210000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s9c: smps9 { + regulator-name = "vreg_s9c"; regulator-min-microvolt = <1010000>; regulator-max-microvolt = <1170000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3400000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -451,36 +499,42 @@ }; vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c: ldo11 { + regulator-name = "vreg_l11c"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -522,7 +576,76 @@ &i2c1 { status = "okay"; - /* PM8008 PMIC @ 8 and 9 */ + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&pm8350c_gpios 3 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s1b>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + /* Pixelworks @ 26 */ /* FSA4480 USB audio switch @ 42 */ /* AW86927FCR haptics @ 5a */ @@ -551,7 +674,7 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt"; + firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mbn"; status = "okay"; }; @@ -653,6 +776,14 @@ }; }; +&pm8350c_gpios { + pm8008_reset_n_default: pm8008-reset-n-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-down; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -810,6 +941,13 @@ bias-pull-up; }; + pm8008_int_default: pm8008-int-default-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; @@ -864,7 +1002,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 47ca2d000341..a0668f767e4b 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -658,7 +658,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -667,6 +666,7 @@ }; &usb_1_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts new file mode 100644 index 000000000000..4667e47a74bc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -0,0 +1,961 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com> + * Copyright (c) 2024, Caleb Connolly <caleb@postmarketos.org> + */ + +/dts-v1/; + +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &rmtfs_mem; + +/ { + model = "SHIFT SHIFTphone 8"; + compatible = "shift,otter", "qcom,qcm6490"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_down_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + reserved-memory { + cont_splash_mem: cont-splash@e1000000 { + reg = <0x0 0xe1000000 0x0 0x2300000>; + no-map; + }; + + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + rmtfs_mem: rmtfs@f8500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8500000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>; + }; + }; + + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b: smps7 { + regulator-name = "vreg_s7b"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b: smps8 { + regulator-name = "vreg_s8b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + /* Constrained for UFS VCC, at least until UFS driver scales voltage */ + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9c: smps9 { + regulator-name = "vreg_s9c"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c: ldo11 { + regulator-name = "vreg_l11c"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_EDP_CLKREF_EN>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn"; +}; + +&i2c1 { + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* rtc6226 FM receiver @ 64 */ + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + /* tas2563 audio codec @ 4d */ +}; + +&i2c9 { + status = "okay"; + + /* TMS(?) NFC @ 28 */ + /* Ti drv2624 haptics @ 5a */ +}; + +&i2c13 { + status = "okay"; + + /* focaltech FT3658U @ 38 */ +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn"; + status = "okay"; +}; + +&pm7250b_adc { + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm7325_gpios { + volume_down_default: volume-down-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + cam-flash-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wide-rfc-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + status = "okay"; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_xo_therm"; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@145 { + reg = <PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_cam_flash_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; + + channel@147 { + reg = <PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_wide_rfc_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn"; + status = "okay"; +}; + +&sdc2_clk { + drive-strength = <16>; + bias-disable; +}; + +&sdc2_cmd { + drive-strength = <10>; + bias-pull-up; +}; + +&sdc2_data { + drive-strength = <10>; + bias-pull-up; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + + status = "okay"; +}; + +&tlmm { + /* + * 48-52: protected by XPU, not sure why. + */ + gpio-reserved-ranges = <48 4>; + + bluetooth_enable_default: bluetooth-enable-default-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + + pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_l19b>; + vddaon-supply = <&vreg_s7b>; + vddbtcxmx-supply = <&vreg_s7b>; + vddrfacmn-supply = <&vreg_s7b>; + vddrfa0p8-supply = <&vreg_s7b>; + vddrfa1p7-supply = <&vreg_s1b>; + vddrfa1p2-supply = <&vreg_s8b>; + vddrfa2p2-supply = <&vreg_s1c>; + vddasd-supply = <&vreg_l11c>; + + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b>; + vcc-max-microamp = <800000>; + /* + * Technically l9b enables an eLDO (supplied by s1b) which then powers + * VCCQ2 of the UFS. + */ + vccq-supply = <&vreg_l9b>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c>; + vdda-pll-supply = <&vreg_l6b>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l2b>; + + qcom,hs-crossover-voltage-microvolt = <28000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-rise-fall-time-bp = <5430>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <2430>; + + qcom,pre-emphasis-amplitude-bp = <20000>; + qcom,pre-emphasis-duration-bp = <20000>; + + qcom,squelch-detector-bp = <(-2090)>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l1b>; + + status = "okay"; +}; + +&wifi { + qcom,ath11k-calibration-variant = "SHIFTphone_8"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index ac451f378056..c291bbed6073 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1324,7 +1324,7 @@ }; apcs_hfpll: clock-controller@b016000 { - compatible = "qcom,hfpll"; + compatible = "qcom,qcs404-hfpll"; reg = <0x0b016000 0x30>; #clock-cells = <0>; clock-output-names = "apcs_hfpll"; @@ -1531,10 +1531,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 0xff08>, - <GIC_PPI 3 0xff08>, - <GIC_PPI 4 0xff08>, - <GIC_PPI 1 0xff08>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; smp2p-adsp { @@ -1600,7 +1600,6 @@ thermal-zones { aoss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -1615,7 +1614,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -1630,7 +1628,6 @@ lpass-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -1645,7 +1642,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -1660,7 +1656,6 @@ cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -1694,7 +1689,6 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -1728,7 +1722,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -1762,7 +1755,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -1796,7 +1788,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -1830,7 +1821,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index a085ff5b5fb2..0d45662b8028 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -52,6 +52,25 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -530,6 +549,54 @@ <GCC_WPSS_RSCP_CLK>; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <&vreg_l11c_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + &i2c1 { status = "okay"; @@ -587,6 +654,21 @@ remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + status = "okay"; +}; + &mdss_edp { status = "okay"; }; @@ -602,10 +684,18 @@ status = "okay"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/qcs6490/adsp.mbn"; status = "okay"; @@ -632,7 +722,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -711,3 +800,23 @@ function = "gpio"; bias-disable; }; + +&pm7250b_gpios { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio2"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&tlmm { + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts new file mode 100644 index 000000000000..2e2e46f214c7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "qcs8550-aim300.dtsi" +#include "pm8010.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; + compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", + "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + debounce-interval = <15>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + }; + + regulators-3 { + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + }; + + regulators-4 { + vdd-s4-supply = <&vph_pwr>; + }; + + regulators-5 { + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + }; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + + typec-retimer@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0 { + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&dsi_active>, <&te_default>; + pinctrl-1 = <&dsi_suspend>, <&te_default>; + pinctrl-names = "default", "sleep"; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8550/adsp.mbn", + "qcom/qcs8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8550/cdsp.mbn", + "qcom/qcs8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&swr2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + dsi_active: dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + dsi_suspend: dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te_default: te-default-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_dp_qmpphy { + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi new file mode 100644 index 000000000000..f6960e2d466a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcs8550.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; +}; + +&pcie0 { + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; +}; + +&pcie1 { + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p9>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_hsphy { + phys = <&pm8550b_eusb2_repeater>; + + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi new file mode 100644 index 000000000000..07b314834d88 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sm8550.dtsi" + +/delete-node/ &reserved_memory; + +/ { + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + + /* These are 3 types of reserved memory regions here: + * 1. Firmware related regions which aren't shared with kernel. + * The device tree source in kernel doesn't need to have node to + * indicate the firmware related reserved information. Bootloader + * conveys the information by updating devicetree at runtime. + * This will be described as: UEFI saves the physical address of + * the UEFI System Table to dts file's chosen node. Kernel read this + * table and add reserved memory regions to efi config table. Current + * reserved memory region may have reserved region which was not yet + * used, release note of the firmware have such kind of information. + * 2. Firmware related memory regions which are shared with Kernel + * The device tree source in the kernel needs to include nodes + * that indicate fimware-related shared information. A label name + * is suggested because this type of shared information needs to + * be referenced by specific drivers for handling purposes. + * Unlike previous platforms, QCS8550 boots using EFI and describes + * most reserved regions in the ESRT memory map. As a result, reserved + * memory regions which aren't relevant to the kernel(like the hypervisor + ( region) don't need to be described in DT. + * 3. Remoteproc regions. + * Remoteproc regions will be reserved and then assigned to + * subsystem firmware later. + * Here is a reserved memory map for this platform: + * 0x80000000 +-------------------+ + * | | + * | Firmware Related | + * | | + * 0x8a800000 +-------------------+ + * | | + * | Remoteproc Region | + * | | + * 0xa7000000 +-------------------+ + * | | + * | Kernel Available | + * | | + * 0xd4d00000 +-------------------+ + * | | + * | Firmware Related | + * | | + * 0x100000000 +-------------------+ + */ + + aop_image_mem: aop-image-region@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config-region@81c80000 { + no-map; + reg = <0x0 0x81c80000 0x0 0x20000>; + }; + + smem_mem: smem-region@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0x0 0x81f00000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss-region@8a800000 { + reg = <0x0 0x8a800000 0x0 0x10800000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { + reg = <0x0 0x9b000000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9b080000 { + reg = <0x0 0x9b080000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9b090000 { + reg = <0x0 0x9b090000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { + reg = <0x0 0x9b09a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: spss-region@9b100000 { + reg = <0x0 0x9b100000 0x0 0x180000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 { + reg = <0x0 0x9b280000 0x0 0x80000>; + no-map; + }; + + camera_mem: camera-region@9b300000 { + reg = <0x0 0x9b300000 0x0 0x800000>; + no-map; + }; + + video_mem: video-region@9bb00000 { + reg = <0x0 0x9bb00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp-region@9c200000 { + reg = <0x0 0x9c200000 0x0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0x0 0x9c900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { + reg = <0x0 0x9e900000 0x0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { + reg = <0x0 0x9e980000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x4080000>; + no-map; + }; + + mpss_dsm_mem: mpss_dsm_region@d4d00000 { + reg = <0x0 0xd4d00000 0x0 0x3300000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 5a25cdec969e..e65305f8136c 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -500,3 +500,26 @@ &uart7 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l8a_0p91>; + vdda18-supply = <&vreg_l14a_1p8>; + vdda33-supply = <&vreg_l2a_2p3>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l8a_0p91>; + vdda-pll-supply = <&vreg_l3a_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index f90f03fa6a24..642ca8f0236b 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/clock/qcom,qdu1000-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -913,6 +915,126 @@ }; }; + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,qdu1000-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x0 0x088e3000 0x0 0x120>; + #phy-cells = <0>; + + clocks =<&gcc GCC_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88e5000 { + compatible = "qcom,qdu1000-qmp-usb3-uni-phy"; + reg = <0x0 0x088e5000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB2_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,qdu1000-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>; + + interconnect-names = "usb-ddr", + "apps-usb"; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0xc0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, + <&usb_1_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,qdu1000-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; @@ -1478,6 +1600,21 @@ "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + + nvmem-cells = <&multi_chan_ddr>; + nvmem-cell-names = "multi-chan-ddr"; + }; + + sec_qfprom: efuse@221c8000 { + compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom"; + reg = <0 0x221c8000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + multi_chan_ddr: multi-chan-ddr@12b { + reg = <0x12b 0x1>; + bits = <0 2>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index bb5191422660..e19790464a11 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -59,6 +59,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -199,7 +210,15 @@ status = "okay"; }; -&i2c2 { +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; + }; +}; + +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 2c39bb1b97db..1888d99d398b 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -60,6 +60,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -190,7 +201,7 @@ }; }; -&i2c2 { +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; @@ -294,7 +305,7 @@ &pmi632_vbus { regulator-min-microamp = <500000>; - regulator-max-microamp = <3000000>; + regulator-max-microamp = <1000000>; status = "okay"; }; @@ -403,6 +414,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; }; vreg_l10a_1p8: l10 { diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index cd0db4f31d4a..ccff6cd73fdf 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -108,10 +108,69 @@ regulator-always-on; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; + thermal-zones { conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150b_adc_tm 0>; trips { @@ -124,8 +183,6 @@ }; pm8150l-pcb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 1>; trips { @@ -138,8 +195,6 @@ }; skin-msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 0>; trips { @@ -152,8 +207,6 @@ }; wifi-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 1>; trips { @@ -166,8 +219,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 0>; trips { @@ -734,6 +785,23 @@ vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie1 { status = "okay"; }; @@ -1303,6 +1371,14 @@ function = "gpio"; bias-pull-up; }; + + wlan_en_state: wlan-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; }; &uart6 { @@ -1311,17 +1387,12 @@ bluetooth { compatible = "qcom,qca6390-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_state>; - - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - - vddio-supply = <&vreg_s4a_1p8>; - vddpmu-supply = <&vreg_s2f_0p95>; - vddaon-supply = <&vreg_s6a_0p95>; - vddrfa0p9-supply = <&vreg_s2f_0p95>; - vddrfa1p3-supply = <&vreg_s8c_1p3>; - vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; @@ -1356,8 +1427,8 @@ usb-role-switch; }; -&usb_1_role_switch_out { - remote-endpoint = <&pm8150b_role_switch_in>; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; }; &usb_1_hsphy { @@ -1373,7 +1444,6 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; - orientation-switch; }; &usb_1_qmpphy_out { @@ -1465,8 +1535,8 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { - remote-endpoint = <&usb_1_role_switch_out>; + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts index 2a862c83309e..1c781d9e24cf 100644 --- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -467,3 +467,26 @@ &uart7 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l8a_0p91>; + vdda18-supply = <&vreg_l14a_1p8>; + vdda33-supply = <&vreg_l2a_2p3>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l8a_0p91>; + vdda-pll-supply = <&vreg_l3a_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi index ffb7ab695213..9e70effc72e1 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi @@ -38,3 +38,7 @@ */ compatible = "qcom,sa8155p-rpmhpd"; }; + +&videocc { + power-domains = <&rpmhpd SA8155P_CX>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index eaa43f022a65..1369c3d43f86 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -10,7 +10,7 @@ thermal-zones { pmm8654au_0_thermal: pm8775-0-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; trips { @@ -30,7 +30,7 @@ pmm8654au_1_thermal: pm8775-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; trips { @@ -50,7 +50,7 @@ pmm8654au_2_thermal: pm8775-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; trips { @@ -70,7 +70,7 @@ pmm8654au_3_thermal: pm8775-3-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts new file mode 100644 index 000000000000..ae065ae92478 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sa8775p-ride.dtsi" + +/ { + model = "Qualcomm SA8775P Ride Rev3"; + compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p"; +}; + +ðernet0 { + phy-mode = "2500base-x"; +}; + +ðernet1 { + phy-mode = "2500base-x"; +}; + +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + + sgmii_phy1: phy@0 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x0>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 26ad05bd3b3f..2e87fd760dbd 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,835 +5,43 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sa8775p.dtsi" -#include "sa8775p-pmics.dtsi" +#include "sa8775p-ride.dtsi" / { model = "Qualcomm SA8775P Ride"; compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; - - aliases { - ethernet0 = ðernet0; - ethernet1 = ðernet1; - i2c11 = &i2c11; - i2c18 = &i2c18; - serial0 = &uart10; - serial1 = &uart12; - serial2 = &uart17; - spi16 = &spi16; - ufshc1 = &ufs_mem_hc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1816000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s5a: smps5 { - regulator-name = "vreg_s5a"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1996000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <788000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - /* - * FIXME: This should have regulator-allow-set-load but - * we're getting an over-current fault from the PMIC - * when switching to LPM. - */ - }; - - vreg_l5c: ldo5 { - regulator-name = "vreg_l5c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2700000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "e"; - - vreg_s4e: smps4 { - regulator-name = "vreg_s4e"; - regulator-min-microvolt = <970000>; - regulator-max-microvolt = <1520000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s7e: smps7 { - regulator-name = "vreg_s7e"; - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9e: smps9 { - regulator-name = "vreg_s9e"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <570000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6e: ldo6 { - regulator-name = "vreg_l6e"; - regulator-min-microvolt = <1280000>; - regulator-max-microvolt = <1450000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8e: ldo8 { - regulator-name = "vreg_l8e"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; }; ðernet0 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy0>; - - pinctrl-0 = <ðernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,ps-speed = <1000>; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - - sgmii_phy1: phy@a { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0xa>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; }; ðernet1 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy1>; - - snps,mtl-rx-config = <&mtl_rx_setup1>; - snps,mtl-tx-config = <&mtl_tx_setup1>; - snps,ps-speed = <1000>; - - status = "okay"; - - mtl_rx_setup1: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup1: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; -}; - -&i2c11 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c11_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c18 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c18_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pmm8654au_0_gpios { - gpio-line-names = "DS_EN", - "POFF_COMPLETE", - "UFS0_VER_ID", - "FAST_POFF", - "DBU1_PON_DONE", - "AOSS_SLEEP", - "CAM_DES0_EN", - "CAM_DES1_EN", - "CAM_DES2_EN", - "CAM_DES3_EN", - "UEFI", - "ANALOG_PON_OPT"; -}; - -&pmm8654au_0_pon_resin { - linux,code = <KEY_VOLUMEDOWN>; - status = "okay"; -}; - -&pmm8654au_1_gpios { - gpio-line-names = "PMIC_C_ID0", - "PMIC_C_ID1", - "UFS1_VER_ID", - "IPA_PWR", - "", - "WLAN_DBU4_EN", - "WLAN_EN", - "BT_EN", - "USB2_PWR_EN", - "USB2_FAULT"; - - usb2_en_state: usb2-en-state { - pins = "gpio9"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_2_gpios { - gpio-line-names = "PMIC_E_ID0", - "PMIC_E_ID1", - "USB0_PWR_EN", - "USB0_FAULT", - "SENSOR_IRQ_1", - "SENSOR_IRQ_2", - "SENSOR_RST", - "SGMIIO0_RST", - "SGMIIO1_RST", - "USB1_PWR_ENABLE", - "USB1_FAULT", - "VMON_SPX8"; - - usb0_en_state: usb0-en-state { - pins = "gpio3"; - function = "normal"; - output-high; - power-source = <0>; - }; - - usb1_en_state: usb1-en-state { - pins = "gpio10"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_3_gpios { - gpio-line-names = "PMIC_G_ID0", - "PMIC_G_ID1", - "GNSS_RST", - "GNSS_EN", - "GNSS_BOOT_MODE"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_2 { - status = "okay"; -}; - -&serdes0 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&serdes1 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32764>; -}; - -&spi16 { - pinctrl-0 = <&qup_spi16_default>; - pinctrl-names = "default"; - status = "okay"; }; -&tlmm { - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio8"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio9"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - qup_uart10_default: qup-uart10-state { - pins = "gpio46", "gpio47"; - function = "qup1_se3"; - }; - - qup_spi16_default: qup-spi16-state { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - function = "qup2_se2"; - drive-strength = <6>; - bias-disable; - }; - - qup_i2c11_default: qup-i2c11-state { - pins = "gpio48", "gpio49"; - function = "qup1_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c18_default: qup-i2c18-state { - pins = "gpio95", "gpio96"; - function = "qup2_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_uart12_default: qup-uart12-state { - qup_uart12_cts: qup-uart12-cts-pins { - pins = "gpio52"; - function = "qup1_se5"; - bias-disable; - }; - - qup_uart12_rts: qup-uart12-rts-pins { - pins = "gpio53"; - function = "qup1_se5"; - bias-pull-down; - }; - - qup_uart12_tx: qup-uart12-tx-pins { - pins = "gpio54"; - function = "qup1_se5"; - bias-pull-up; - }; - - qup_uart12_rx: qup-uart12-rx-pins { - pins = "gpio55"; - function = "qup1_se5"; - bias-pull-down; - }; - }; - - qup_uart17_default: qup-uart17-state { - qup_uart17_cts: qup-uart17-cts-pins { - pins = "gpio91"; - function = "qup2_se3"; - bias-disable; - }; - - qup_uart17_rts: qup0-uart17-rts-pins { - pins = "gpio92"; - function = "qup2_se3"; - bias-pull-down; - }; - - qup_uart17_tx: qup0-uart17-tx-pins { - pins = "gpio93"; - function = "qup2_se3"; - bias-pull-up; - }; - - qup_uart17_rx: qup0-uart17-rx-pins { - pins = "gpio94"; - function = "qup2_se3"; - bias-pull-down; - }; - }; +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; - pcie0_default_state: pcie0-default-state { - perst-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio1"; - function = "pcie0_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio0"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; - pcie1_default_state: pcie1-default-state { - perst-pins { - pins = "gpio4"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio3"; - function = "pcie1_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; }; - -&pcie0 { - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - - status = "okay"; -}; - -&pcie1 { - perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&pcie1_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&uart10 { - compatible = "qcom,geni-debug-uart"; - pinctrl-0 = <&qup_uart10_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart12 { - pinctrl-0 = <&qup_uart12_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart17 { - pinctrl-0 = <&qup_uart17_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_en_state>; - - status = "okay"; -}; - -&usb_0_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_en_state>; - - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_2 { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_en_state>; - - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; -}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi new file mode 100644 index 000000000000..2a6170623ea9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c11 = &i2c11; + i2c18 = &i2c18; + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + spi16 = &spi16; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + phy-handle = <&sgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <1000>; + + status = "okay"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-handle = <&sgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <1000>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 1b3dc0ece54d..23f1b2e5e624 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -205,9 +205,23 @@ }; }; + dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = + <&swao_rep_out1>; + }; + }; + }; + }; + firmware { scm { compatible = "qcom,scm-sa8775p", "qcom,scm"; + memory-region = <&tz_ffi_mem>; }; }; @@ -418,6 +432,12 @@ no-map; }; + tz_ffi_mem: tz-ffi@91c00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x91c00000 0x0 0x1400000>; + no-map; + }; + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { reg = <0x0 0x93b00000 0x0 0xf00000>; no-map; @@ -1644,6 +1664,919 @@ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; }; + stm: stm@4002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x4002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + tpdm@4003000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4003000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm0_out: endpoint { + remote-endpoint = + <&qdss_tpda_in0>; + }; + }; + }; + }; + + tpda@4004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x4004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = + <&funnel0_in6>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + qdss_tpda_in0: endpoint { + remote-endpoint = + <&qdss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + qdss_tpda_in1: endpoint { + remote-endpoint = + <&qdss_tpdm1_out>; + }; + }; + }; + }; + + tpdm@400f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x400f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm1_out: endpoint { + remote-endpoint = + <&qdss_tpda_in1>; + }; + }; + }; + }; + + funnel@4041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&qdss_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel0_in6: endpoint { + remote-endpoint = + <&qdss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + }; + + funnel@4042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4042000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&qdss_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + }; + + funnel@4045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4045000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + qdss_funnel_out: endpoint { + remote-endpoint = + <&aoss_funnel_in7>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + qdss_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + qdss_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + funnel@4b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4b04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + aoss_funnel_out: endpoint { + remote-endpoint = + <&etf0_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + aoss_funnel_in6: endpoint { + remote-endpoint = + <&aoss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + aoss_funnel_in7: endpoint { + remote-endpoint = + <&qdss_funnel_out>; + }; + }; + }; + }; + + tmc_etf: tmc@4b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x4b05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf0_out: endpoint { + remote-endpoint = + <&swao_rep_in>; + }; + }; + }; + + in-ports { + port { + etf0_in: endpoint { + remote-endpoint = + <&aoss_funnel_out>; + }; + }; + }; + }; + + replicator@4b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x4b06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + swao_rep_out1: endpoint { + remote-endpoint = + <&eud_in>; + }; + }; + }; + + in-ports { + port { + swao_rep_in: endpoint { + remote-endpoint = + <&etf0_out>; + }; + }; + }; + }; + + tpda@4b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x4b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = + <&aoss_funnel_in6>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + aoss_tpda_in0: endpoint { + remote-endpoint = + <&aoss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + aoss_tpda_in1: endpoint { + remote-endpoint = + <&aoss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + aoss_tpda_in2: endpoint { + remote-endpoint = + <&aoss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + aoss_tpda_in3: endpoint { + remote-endpoint = + <&aoss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + aoss_tpda_in4: endpoint { + remote-endpoint = + <&aoss_tpdm4_out>; + }; + }; + }; + }; + + tpdm@4b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm0_out: endpoint { + remote-endpoint = + <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@4b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm1_out: endpoint { + remote-endpoint = + <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@4b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm2_out: endpoint { + remote-endpoint = + <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@4b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm3_out: endpoint { + remote-endpoint = + <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@4b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x4b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm4_out: endpoint { + remote-endpoint = + <&aoss_tpda_in4>; + }; + }; + }; + }; + + aoss_cti: cti@4b13000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x4b13000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@6040000 { + compatible = "arm,primecell"; + reg = <0x0 0x6040000 0x0 0x1000>; + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + etm@6140000 { + compatible = "arm,primecell"; + reg = <0x0 0x6140000 0x0 0x1000>; + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + etm@6240000 { + compatible = "arm,primecell"; + reg = <0x0 0x6240000 0x0 0x1000>; + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel0_in2>; + }; + }; + }; + }; + + etm@6340000 { + compatible = "arm,primecell"; + reg = <0x0 0x6340000 0x0 0x1000>; + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel0_in3>; + }; + }; + }; + }; + + etm@6440000 { + compatible = "arm,primecell"; + reg = <0x0 0x6440000 0x0 0x1000>; + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel0_in4>; + }; + }; + }; + }; + + etm@6540000 { + compatible = "arm,primecell"; + reg = <0x0 0x6540000 0x0 0x1000>; + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel0_in5>; + }; + }; + }; + }; + + etm@6640000 { + compatible = "arm,primecell"; + reg = <0x0 0x6640000 0x0 0x1000>; + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel0_in6>; + }; + }; + }; + }; + + etm@6740000 { + compatible = "arm,primecell"; + reg = <0x0 0x6740000 0x0 0x1000>; + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel0_in7>; + }; + }; + }; + }; + + funnel@6800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x6800000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel0_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel0_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel0_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel0_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel0_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel0_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@6810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x6810000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&funnel1_in4>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel1_in3: endpoint { + remote-endpoint = + <&apss_tpda_out>; + }; + }; + }; + }; + + tpdm@6860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x6860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm3_out: endpoint { + remote-endpoint = + <&apss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6861000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x6861000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm4_out: endpoint { + remote-endpoint = + <&apss_tpda_in4>; + }; + }; + }; + }; + + tpda@6863000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x6863000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_tpda_out: endpoint { + remote-endpoint = + <&apss_funnel1_in3>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_tpda_in0: endpoint { + remote-endpoint = + <&apss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_tpda_in1: endpoint { + remote-endpoint = + <&apss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_tpda_in2: endpoint { + remote-endpoint = + <&apss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_tpda_in3: endpoint { + remote-endpoint = + <&apss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_tpda_in4: endpoint { + remote-endpoint = + <&apss_tpdm4_out>; + }; + }; + }; + }; + + tpdm@68a0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68a0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm0_out: endpoint { + remote-endpoint = + <&apss_tpda_in0>; + }; + }; + }; + }; + + tpdm@68b0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68b0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm1_out: endpoint { + remote-endpoint = + <&apss_tpda_in1>; + }; + }; + }; + }; + + tpdm@68c0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x68c0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm2_out: endpoint { + remote-endpoint = + <&apss_tpda_in2>; + }; + }; + }; + }; + usb_0_hsphy: phy@88e4000 { compatible = "qcom,sa8775p-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -1959,6 +2892,25 @@ status = "disabled"; }; + llcc: system-cache-controller@9200000 { + compatible = "qcom,sa8775p-llcc"; + reg = <0x0 0x09200000 0x0 0x80000>, + <0x0 0x09300000 0x0 0x80000>, + <0x0 0x09400000 0x0 0x80000>, + <0x0 0x09500000 0x0 0x80000>, + <0x0 0x09600000 0x0 0x80000>, + <0x0 0x09700000 0x0 0x80000>, + <0x0 0x09a00000 0x0 0x80000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -2099,6 +3051,20 @@ wakeup-parent = <&pdc>; }; + sram: sram@146d8000 { + compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd"; + reg = <0x0 0x146d8000 0x0 0x1000>; + ranges = <0x0 0x0 0x146d8000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x100000>; @@ -2504,6 +3470,7 @@ phy-names = "serdes"; iommus = <&apps_smmu 0x140 0xf>; + dma-coherent; snps,tso; snps,pbl = <32>; @@ -2538,6 +3505,7 @@ phy-names = "serdes"; iommus = <&apps_smmu 0x120 0xf>; + dma-coherent; snps,tso; snps,pbl = <32>; @@ -2550,9 +3518,6 @@ thermal-zones { aoss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -2572,7 +3537,6 @@ cpu-0-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -2593,7 +3557,6 @@ cpu-0-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -2614,7 +3577,6 @@ cpu-0-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -2635,7 +3597,6 @@ cpu-0-3-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -2656,7 +3617,6 @@ gpuss-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -2677,7 +3637,6 @@ gpuss-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -2698,7 +3657,6 @@ gpuss-2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -2718,9 +3676,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2739,9 +3694,6 @@ }; camss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -2760,9 +3712,6 @@ }; pcie-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -2781,9 +3730,6 @@ }; cpuss-0-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -2802,9 +3748,6 @@ }; aoss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2824,7 +3767,6 @@ cpu-0-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -2845,7 +3787,6 @@ cpu-0-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -2866,7 +3807,6 @@ cpu-0-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -2887,7 +3827,6 @@ cpu-0-3-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -2908,7 +3847,6 @@ gpuss-3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -2929,7 +3867,6 @@ gpuss-4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -2950,7 +3887,6 @@ gpuss-5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -2970,9 +3906,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -2991,9 +3924,6 @@ }; camss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -3012,9 +3942,6 @@ }; pcie-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -3033,9 +3960,6 @@ }; cpuss-0-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { @@ -3054,9 +3978,6 @@ }; aoss-2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 0>; trips { @@ -3076,7 +3997,6 @@ cpu-1-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 1>; @@ -3097,7 +4017,6 @@ cpu-1-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 2>; @@ -3118,7 +4037,6 @@ cpu-1-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 3>; @@ -3139,7 +4057,6 @@ cpu-1-3-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 4>; @@ -3160,7 +4077,6 @@ nsp-0-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 5>; @@ -3181,7 +4097,6 @@ nsp-0-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 6>; @@ -3202,7 +4117,6 @@ nsp-0-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 7>; @@ -3223,7 +4137,6 @@ nsp-1-0-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 8>; @@ -3244,7 +4157,6 @@ nsp-1-1-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 9>; @@ -3265,7 +4177,6 @@ nsp-1-2-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens2 10>; @@ -3285,9 +4196,6 @@ }; ddrss-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 11>; trips { @@ -3306,9 +4214,6 @@ }; cpuss-1-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens2 12>; trips { @@ -3327,9 +4232,6 @@ }; aoss-3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 0>; trips { @@ -3349,7 +4251,6 @@ cpu-1-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 1>; @@ -3370,7 +4271,6 @@ cpu-1-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 2>; @@ -3391,7 +4291,6 @@ cpu-1-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 3>; @@ -3412,7 +4311,6 @@ cpu-1-3-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 4>; @@ -3433,7 +4331,6 @@ nsp-0-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 5>; @@ -3454,7 +4351,6 @@ nsp-0-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 6>; @@ -3475,7 +4371,6 @@ nsp-0-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 7>; @@ -3496,7 +4391,6 @@ nsp-1-0-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 8>; @@ -3517,7 +4411,6 @@ nsp-1-1-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 9>; @@ -3538,7 +4431,6 @@ nsp-1-2-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; thermal-sensors = <&tsens3 10>; @@ -3558,9 +4450,6 @@ }; ddrss-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 11>; trips { @@ -3579,9 +4468,6 @@ }; cpuss-1-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens3 12>; trips { @@ -3689,6 +4575,53 @@ }; }; + pcie0_ep: pcie-ep@1c00000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40200000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>, + <0x0 0x40005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x0000 0x7f>; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_0_GDSC>; + phys = <&pcie0_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <2>; + + status = "disabled"; + }; + pcie0_phy: phy@1c04000 { compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; reg = <0x0 0x1c04000 0x0 0x2000>; @@ -3799,6 +4732,53 @@ }; }; + pcie1_ep: pcie-ep@1c10000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60200000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>, + <0x0 0x60005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + iommus = <&pcie_smmu 0x80 0x7f>; + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_1_GDSC>; + phys = <&pcie1_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <4>; + + status = "disabled"; + }; + pcie1_phy: phy@1c14000 { compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; reg = <0x0 0x1c14000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi new file mode 100644 index 000000000000..d91533b80e76 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for clamshells + * + * Copyright 2024 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 7765c8f64905..3c124bbe2f4c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -7,6 +7,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-detachable.dtsi" /* Deleted nodes from sc7180-trogdor.dtsi */ @@ -25,7 +26,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -80,10 +80,6 @@ }; &cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; - cros_ec_proximity: proximity { compatible = "google,cros-ec-mkbp-proximity"; label = "proximity-wifi"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi new file mode 100644 index 000000000000..7c5d8a57ef7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for detachables + * + * Copyright 2024 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */ +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index 2ba3bbf3b9ad..b2df22faafe8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -5,9 +5,8 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ - #include "sc7180-trogdor-rt5682i-sku.dtsi" +#include "sc7180-trogdor-detachable.dtsi" / { /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -45,7 +44,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -135,12 +133,6 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - &panel { compatible = "samsung,atna33xc20"; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index d6db7d83adcf..655bea928e52 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -9,7 +9,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" #include "sc7180-trogdor-rt5682s-sku.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts index 919bfaea6189..340cb119d0a0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -12,6 +12,6 @@ compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index eb20157f6af9..d45e60e3eb9e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -17,6 +17,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts index 45d34718a1bc..e906ce877b8c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts @@ -18,6 +18,6 @@ compatible = "google,lazor-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts index 79028d0dd1b0..4b9ee15b09f6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts @@ -22,6 +22,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index 3459b81c5628..a960553f3994 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -21,6 +21,6 @@ "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index ff8f47da109d..82bd9ed7e21a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -25,6 +25,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts index faf527972977..6278c1715d3f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -18,6 +18,6 @@ compatible = "google,lazor-rev9-sku2", "qcom,sc7180"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts index d737fd0637fb..0ec1697ae2c9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -22,6 +22,6 @@ status = "okay"; }; -&keyboard_backlight { +&pwmleds { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index e9f213d27711..c3fd6760de7a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -5,8 +5,7 @@ * Copyright 2020 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" &ap_sar_sensor { semtech,cs0-ground; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index 8823edbb4d6e..cc2c5610a279 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -5,8 +5,7 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" &ap_sar_sensor { compatible = "semtech,sx9324"; @@ -83,6 +82,8 @@ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + &en_pp3300_dx_edp { pins = "gpio67"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 067813f5f437..ac8d4589e3fb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -6,17 +6,13 @@ */ #include "sc7180-trogdor.dtsi" -/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { thermal-zones { 5v-choke-thermal { - polling-delay-passive = <0>; - polling-delay = <250>; - thermal-sensors = <&pm6150_adc_tm 1>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 5f06842c683b..00229b1515e6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -9,9 +9,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; +#include "sc7180-trogdor-detachable.dtsi" / { ppvar_lcd: ppvar-lcd-regulator { @@ -47,12 +45,6 @@ status = "okay"; }; -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - &gpio_keys { status = "okay"; }; @@ -136,6 +128,11 @@ pp3300_disp_on: &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; +/* This board only has 1 USB Type-C port. */ +&usb_c1 { + status = "disabled"; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ /* diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index c9667751a990..d393a2712ce6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -8,8 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" -/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ -#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-clamshell.dtsi" #include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 305ad127246e..af89d80426ab 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-detachable.dtsi" / { avdd_lcd: avdd-lcd-regulator { @@ -50,7 +51,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <574>; @@ -104,10 +104,6 @@ base_detection: cbas { compatible = "google,cros-cbas"; }; - - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 8513be297120..74ab321d3333 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -21,9 +21,6 @@ / { thermal-zones { charger_thermal: charger-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150_adc_tm 0>; trips { @@ -359,10 +356,11 @@ #sound-dai-cells = <0>; }; - pwmleds { + pwmleds: pwmleds { compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: led-0 { - status = "disabled"; label = "cros_ec::kbd_backlight"; function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 4774a859bd7e..b5ebf8980325 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1582,8 +1582,7 @@ }; ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sc7180-qmp-ufs-phy", - "qcom,sm7150-qmp-ufs-phy"; + compatible = "qcom,sc7180-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, @@ -3067,6 +3066,7 @@ iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; @@ -4036,7 +4036,6 @@ thermal-zones { cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; sustainable-power = <1052>; @@ -4085,7 +4084,6 @@ cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; sustainable-power = <1052>; @@ -4134,7 +4132,6 @@ cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; sustainable-power = <1052>; @@ -4183,7 +4180,6 @@ cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; sustainable-power = <1052>; @@ -4232,7 +4228,6 @@ cpu4_thermal: cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; sustainable-power = <1052>; @@ -4281,7 +4276,6 @@ cpu5_thermal: cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; sustainable-power = <1052>; @@ -4330,7 +4324,6 @@ cpu6_thermal: cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; sustainable-power = <1425>; @@ -4371,7 +4364,6 @@ cpu7_thermal: cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; sustainable-power = <1425>; @@ -4412,7 +4404,6 @@ cpu8_thermal: cpu8-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; sustainable-power = <1425>; @@ -4453,7 +4444,6 @@ cpu9_thermal: cpu9-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; sustainable-power = <1425>; @@ -4494,7 +4484,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -4515,7 +4504,6 @@ cpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -4535,7 +4523,6 @@ cpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -4555,7 +4542,6 @@ gpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; @@ -4583,7 +4569,6 @@ gpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; @@ -4611,7 +4596,6 @@ aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -4632,7 +4616,6 @@ cwlan-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -4653,7 +4636,6 @@ audio-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -4674,7 +4656,6 @@ ddr-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -4695,7 +4676,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -4716,7 +4696,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -4737,7 +4716,6 @@ mdm-core-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -4758,7 +4736,6 @@ mdm-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -4779,7 +4756,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; @@ -4800,7 +4776,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 9>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index a0059527d9e4..7370aa0dbf0e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -495,7 +495,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index f9b96bd2477e..7d1d5bbbbbd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -427,7 +427,6 @@ }; uart_dbg: &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index fc9ec367e3a5..3d8410683402 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -24,6 +24,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,lpass.h> #include <dt-bindings/thermal/thermal.h> @@ -710,6 +711,7 @@ firmware { scm: scm { compatible = "qcom,scm-sc7280", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; @@ -1440,12 +1442,12 @@ }; uart5: serial@994000 { - compatible = "qcom,geni-uart"; + compatible = "qcom,geni-debug-uart"; reg = <0 0x00994000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7280_CX>; operating-points-v2 = <&qup_opp_table>; @@ -2129,6 +2131,8 @@ reg = <0 0x016e0000 0 0x1c080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; }; aggre2_noc: interconnect@1700000 { @@ -2136,6 +2140,7 @@ compatible = "qcom,sc7280-aggre2-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; }; mmss_noc: interconnect@1740000 { @@ -2989,6 +2994,18 @@ dma-coherent; }; + gfx_0_tbu: tbu@3dd9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3dd9000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; + }; + + gfx_1_tbu: tbu@3ddd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3ddd000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; reg = <0 0x04080000 0 0x10000>; @@ -3762,6 +3779,75 @@ label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -4150,6 +4236,7 @@ iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; @@ -5407,16 +5494,6 @@ function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts-state { - pins = "gpio20"; - function = "qup05"; - }; - - qup_uart5_rts: qup-uart5-rts-state { - pins = "gpio21"; - function = "qup05"; - }; - qup_uart5_tx: qup-uart5-tx-state { pins = "gpio22"; function = "qup05"; @@ -5802,6 +5879,83 @@ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@151dd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151dd000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@151e1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e1000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@151e5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@151e9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e9000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + compute_dsp_1_tbu: tbu@151ed000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151ed000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_0_tbu: tbu@151f1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f1000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@151f5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f5000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@151f9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f9000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@151fd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151fd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0 0x17a00000 0 0x10000>, /* GICD */ @@ -5991,10 +6145,12 @@ }; }; + sound: sound { + }; + thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -6038,7 +6194,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -6082,7 +6237,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -6126,7 +6280,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -6170,7 +6323,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -6214,7 +6366,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -6258,7 +6409,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; @@ -6302,7 +6452,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; @@ -6346,7 +6495,6 @@ cpu8-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; @@ -6390,7 +6538,6 @@ cpu9-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; @@ -6434,7 +6581,6 @@ cpu10-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; @@ -6478,7 +6624,6 @@ cpu11-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; @@ -6522,7 +6667,6 @@ aoss0-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -6543,7 +6687,6 @@ aoss1-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -6564,7 +6707,6 @@ cpuss0-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -6584,7 +6726,6 @@ cpuss1-thermal { polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -6604,7 +6745,6 @@ gpuss0-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -6632,7 +6772,6 @@ gpuss1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -6659,9 +6798,6 @@ }; nspss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -6680,9 +6816,6 @@ }; nspss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -6701,9 +6834,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -6722,9 +6852,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -6743,9 +6870,6 @@ }; mdmss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -6764,9 +6888,6 @@ }; mdmss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -6785,9 +6906,6 @@ }; mdmss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -6806,9 +6924,6 @@ }; mdmss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -6827,9 +6942,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 6af99116c715..5b226577f9d8 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -68,7 +68,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -103,7 +103,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -582,6 +582,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -590,8 +594,8 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; }; &usb_sec_hsphy { @@ -619,10 +623,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi index ddc84282f142..1c6f12fafe1d 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -13,7 +13,6 @@ thermal-zones { pmc8180-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmc8180_temp>; @@ -40,7 +39,6 @@ pmc8180c-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pmc8180c_temp>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index bfee60c93ccc..65d923497a05 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -71,7 +71,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -106,7 +106,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -648,6 +648,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -656,10 +660,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -685,10 +685,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; @@ -697,6 +693,10 @@ dr_mode = "host"; }; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &wifi { memory-region = <&wlan_mem>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 581a70c34fd2..6e707d993aeb 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8180x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -1890,7 +1891,7 @@ power-domains = <&gcc PCIE_3_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie3_phy>; @@ -2012,7 +2013,7 @@ power-domains = <&gcc PCIE_1_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie1_phy>; @@ -2134,7 +2135,7 @@ power-domains = <&gcc PCIE_2_GDSC>; interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>, - <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>; interconnect-names = "pcie-mem", "cpu-pcie"; phys = <&pcie2_phy>; @@ -2245,18 +2246,13 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; + power-domains = <&gcc UFS_PHY_GDSC>; + #phy-cells = <0>; status = "disabled"; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sc8180x-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -2511,28 +2507,25 @@ status = "disabled"; }; - usb_prim_qmpphy: phy@88e9000 { + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; - reg-names = "reg-base", "dp_com"; + reg = <0 0x088e8000 0 0x3000>; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "aux", - "ref_clk_src", "ref", - "com_aux"; + "com_aux", + "usb3_pipe"; + resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>, <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; reset-names = "phy", "common"; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #phy-cells = <1>; status = "disabled"; @@ -2546,59 +2539,40 @@ usb_prim_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_prim_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_prim_dwc3_ss>; + }; + }; + port@2 { reg = <2>; usb_prim_qmpphy_dp_in: endpoint {}; }; }; - - usb_prim_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_prim_phy_pipe_clk_src"; - }; - - usb_prim_dpphy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; usb_sec_qmpphy: phy@88ee000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; - reg = <0 0x088ee000 0 0x18c>, - <0 0x088ed000 0 0x10>, - <0 0x088ef000 0 0x40>; - reg-names = "reg-base", "dp_com"; + reg = <0 0x088ed000 0 0x3000>; + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "aux", - "ref_clk_src", "ref", - "com_aux"; + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>, <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #phy-cells = <1>; status = "disabled"; @@ -2612,37 +2586,20 @@ usb_sec_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_sec_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_sec_dwc3_ss>; + }; + }; + port@2 { reg = <2>; usb_sec_qmpphy_dp_in: endpoint {}; }; }; - - usb_sec_ssphy: usb3-phy@88e9200 { - reg = <0 0x088ee200 0 0x200>, - <0 0x088ee400 0 0x200>, - <0 0x088eec00 0 0x218>, - <0 0x088ee600 0 0x200>, - <0 0x088ee800 0 0x200>, - <0 0x088eea00 0 0x100>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_sec_phy_pipe_clk_src"; - }; - - usb_sec_dpphy: dp-phy@88ef200 { - reg = <0 0x088ef200 0 0x200>, - <0 0x088ef400 0 0x200>, - <0 0x088efa00 0 0x200>, - <0 0x088ef600 0 0x200>, - <0 0x088ef800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - clock-output-names = "qmp_dptx1_phy_pll_link_clk", - "qmp_dptx1_phy_pll_vco_div_clk"; - }; }; system-cache-controller@9200000 { @@ -2714,11 +2671,26 @@ iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>; + phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_prim_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_prim_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_prim_dwc3_ss: endpoint { + remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>; + }; }; }; }; @@ -2771,11 +2743,26 @@ iommus = <&apps_smmu 0x160 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>; + phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_sec_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_sec_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_sec_dwc3_ss: endpoint { + remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3089,9 +3076,10 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>; + assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_prim_dpphy>; + phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; @@ -3166,9 +3154,10 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>; - assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>; + assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_sec_dpphy>; + phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; @@ -3311,21 +3300,27 @@ compatible = "qcom,sc8180x-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&sleep_clk>, - <&usb_prim_dpphy 0>, - <&usb_prim_dpphy 1>, - <&usb_sec_dpphy 0>, - <&usb_sec_dpphy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&edp_phy 0>, - <&edp_phy 1>; + <&edp_phy 1>, + <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", - "sleep_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk", - "dptx1_phy_pll_link_clk", - "dptx1_phy_pll_vco_div_clk", "edp_phy_pll_link_clk", - "edp_phy_pll_vco_div_clk"; + "edp_phy_pll_vco_div_clk", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SC8180X_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; @@ -3371,7 +3366,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; }; sram@c3f0000 { @@ -3774,7 +3768,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3789,7 +3782,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3804,7 +3796,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3819,7 +3810,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -3834,7 +3824,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3849,7 +3838,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3864,7 +3852,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -3879,7 +3866,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -3894,7 +3880,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -3909,7 +3894,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -3924,7 +3908,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -3939,7 +3922,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -3954,7 +3936,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -3969,7 +3950,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -3984,7 +3964,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -3999,7 +3978,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -4012,16 +3990,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -4036,7 +4025,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -4051,7 +4039,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -4066,7 +4053,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -4081,7 +4067,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -4096,7 +4081,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -4111,7 +4095,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -4126,7 +4109,6 @@ mdm-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -4141,7 +4123,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -4156,7 +4137,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -4169,10 +4149,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 372b35fb844f..b98b2f7752b5 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -56,7 +56,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -91,7 +91,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -675,6 +675,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -700,10 +704,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -712,6 +712,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -737,10 +741,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &xo_board_clk { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 4bf99b6b6e5f..b27143f81867 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -117,7 +117,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -152,7 +152,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -297,9 +297,30 @@ }; thermal-zones { + pm8008-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; trips { @@ -671,6 +692,85 @@ }; }; +&i2c11 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_default>; + + status = "okay"; + + pm8008: pmic@c { + compatible = "qcom,pm8008"; + reg = <0xc>; + + interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s11b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1q: ldo1 { + regulator-name = "vreg_l1q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2q: ldo2 { + regulator-name = "vreg_l2q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3q: ldo3 { + regulator-name = "vreg_l3q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4q: ldo4 { + regulator-name = "vreg_l4q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l5q: ldo5 { + regulator-name = "vreg_l5q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6q: ldo6 { + regulator-name = "vreg_l6q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7q: ldo7 { + regulator-name = "vreg_l7q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -1132,6 +1232,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -1157,10 +1261,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -1169,6 +1269,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -1194,10 +1298,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_2 { status = "okay"; }; @@ -1356,6 +1456,13 @@ bias-disable; }; + i2c11_default: i2c11-default-state { + pins = "gpio18", "gpio19"; + function = "qup11"; + drive-strength = <16>; + bias-disable; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -1459,6 +1566,22 @@ }; }; + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio41"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { perst-n-pins { pins = "gpio178"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 945de77911de..1e3babf2e40d 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -14,7 +14,7 @@ thermal-zones { pm8280_1_thermal: pm8280-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; trips { @@ -34,7 +34,7 @@ pm8280_2_thermal: pm8280-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 59f0a850671a..80a57aa22839 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3222,6 +3222,14 @@ usb_0_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_0_dwc3_ss>; + }; + }; + port@2 { reg = <2>; @@ -3275,6 +3283,14 @@ usb_1_qmpphy_out: endpoint {}; }; + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + port@2 { reg = <2>; @@ -3560,8 +3576,23 @@ phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_0_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_0_dwc3_ss: endpoint { + remote-endpoint = <&usb_0_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3622,8 +3653,23 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; }; }; }; @@ -5833,7 +5879,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -5848,7 +5893,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -5863,7 +5907,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -5878,7 +5921,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -5893,7 +5935,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5908,7 +5949,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5923,7 +5963,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -5938,7 +5977,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -5953,7 +5991,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -5967,13 +6004,25 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - gpu-crit { + gpu_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5983,7 +6032,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 15>; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 702ab49bbc59..60412281ab27 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -96,6 +96,18 @@ vin-supply = <&vph_pwr>; }; + + /* + * this is also used for APC1 CPU power, touching it resets the board + */ + vreg_l10a_1p8: vreg-l10a-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-always-on; + regulator-boot-on; + }; }; &adsp_pil { @@ -220,6 +232,7 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; @@ -227,6 +240,7 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; @@ -464,5 +478,6 @@ &usb3_qmpphy { vdda-phy-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts new file mode 100644 index 000000000000..175befc02b22 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org> + */ +/dts-v1/; + +#include "sdm450.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/ { + model = "Lenovo Smart Tab M10"; + compatible = "lenovo,tbx605f", "qcom,sdm450"; + chassis-type = "tablet"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1200 * 1920 * 3)>; + + width = <1200>; + height = <1920>; + stride = <(1200 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + reserved-memory { + other_ext_region@0 { + no-map; + reg = <0x00 0x84500000 0x00 0x2300000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5506"; + reg = <0x38>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pm8953_l10>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1200>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <0x08>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; + +&wcnss { + vddpx-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; + + vddxo-supply = <&pm8953_l7>; + vddrfa-supply = <&pm8953_l19>; + vddpa-supply = <&pm8953_l9>; + vdddig-supply = <&pm8953_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts index e27f3c5d5bba..a288d52fb6d7 100644 --- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts @@ -248,5 +248,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index f5921b80ef94..c7e3764a8cf3 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1302,6 +1302,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&qusb2phy0>, <&usb3_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; @@ -2422,7 +2423,6 @@ thermal-zones { aoss-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 0>; @@ -2437,7 +2437,6 @@ cpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 1>; @@ -2452,7 +2451,6 @@ cpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 2>; @@ -2467,7 +2465,6 @@ cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 3>; @@ -2488,7 +2485,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -2509,7 +2505,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -2530,7 +2525,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -2557,7 +2551,6 @@ pwr-cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -2578,7 +2571,6 @@ gpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -2591,20 +2583,32 @@ trips { gpu_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 0xf08>, - <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 0 0xf08>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index e2708c74e95a..2c1172aa97e4 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -143,6 +143,10 @@ status = "okay"; }; +&pmi632_vib { + status = "okay"; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts index c82d6e628d2c..2f55db0c8ce3 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts @@ -287,5 +287,6 @@ }; &usb3_dwc3 { + /delete-property/ usb-role-switch; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 80e81c4233b3..187c6698835d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -509,6 +509,18 @@ no-map; }; + smem@86000000 { + compatible = "qcom,smem"; + reg = <0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + camera_mem: camera-mem@8ab00000 { reg = <0 0x8ab00000 0 0x500000>; no-map; @@ -1139,6 +1151,12 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + tlmm: pinctrl@3400000 { compatible = "qcom,sdm670-tlmm"; reg = <0 0x03400000 0 0xc00000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 76bfa786612c..2391f842c903 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -51,9 +51,6 @@ thermal-zones { xo_thermal: xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 1>; trips { @@ -66,9 +63,6 @@ }; msm_thermal: msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 2>; trips { @@ -81,9 +75,6 @@ }; pa_thermal: pa-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 3>; trips { @@ -96,9 +87,6 @@ }; quiet_thermal: quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm8998_adc_tm 4>; trips { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 10de2bd46ffc..54077549b9da 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -2666,6 +2667,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -4028,6 +4031,35 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; usb_2_qmpphy: phy@88eb000 { @@ -4106,8 +4138,29 @@ iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -4161,6 +4214,7 @@ iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -4598,7 +4652,9 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; }; }; @@ -5105,6 +5161,78 @@ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@150c5000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150c5000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@150c9000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150c9000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@150cd000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150cd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@150d1000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d1000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@150d5000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_tbu: tbu@150d9000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150d9000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@150dd000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150dd000 0x0 0x1000>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@150e1000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x0 0x150e1000 0x0 0x1000>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + lpasscc: clock-controller@17014000 { compatible = "qcom,sdm845-lpasscc"; reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; @@ -5358,7 +5486,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -5385,7 +5512,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -5412,7 +5538,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -5439,7 +5564,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -5466,7 +5590,6 @@ cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -5493,7 +5616,6 @@ cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -5520,7 +5642,6 @@ cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -5547,7 +5668,6 @@ cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -5574,7 +5694,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -5589,7 +5708,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5609,7 +5727,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5629,7 +5746,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -5642,16 +5758,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -5664,16 +5791,27 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -5688,7 +5826,6 @@ q6-modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -5703,7 +5840,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -5718,7 +5854,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -5733,7 +5868,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -5748,7 +5882,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -5763,7 +5896,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -5778,7 +5910,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 47dc42f6e936..f18050848cd8 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -370,6 +370,66 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + + embedded-controller@70 { + compatible = "lenovo,yoga-c630-ec"; + reg = <0x70>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ec_int_state>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "host"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi0_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + ucsi0_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + ucsi0_sbu: endpoint { + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "host"; + + /* + * connected to the onboard USB hub, orientation is + * handled by the controller + */ + }; + }; }; &i2c3 { @@ -494,6 +554,7 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/LENOVO/81JL/ipa_fws.elf"; status = "okay"; }; @@ -694,6 +755,13 @@ bias-disable; }; + + ec_int_state: ec-int-state { + pins = "gpio20"; + function = "gpio"; + + bias-disable; + }; }; &uart6 { @@ -741,6 +809,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&ucsi0_hs_in>; +}; + &usb_1_hsphy { status = "okay"; @@ -761,6 +833,10 @@ vdda-pll-supply = <&vdda_usb1_ss_core>; }; +&usb_1_qmpphy_out { + remote-endpoint = <&ucsi0_ss_in>; +}; + &usb_2 { status = "okay"; }; @@ -834,6 +910,7 @@ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Lenovo_C630"; }; &crypto { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index f76e72fb2072..fde16308c7e2 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -41,6 +41,29 @@ vin-supply = <&vph_ext>; }; + + reg_2v952_vcc: regulator-2v952-vcc { + compatible = "regulator-gpio"; + regulator-name = "2v952_vcc"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3600000>; + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; + states = <1650000 0>, <3600000 1>; + startup-delay-us = <5000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_ext>; + }; + + reg_2v95_vdd: regulator-2v95-vdd { + compatible = "regulator-fixed"; + regulator-name = "2v95_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + vin-supply = <®_2v952_vcc>; + }; }; &apps_rsc { @@ -259,8 +282,30 @@ status = "okay"; }; +&sdhc { + cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_2v95_vdd>; + vqmmc-supply = <®_2v952_vcc>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc1_default &sd_cd>; + pinctrl-1 = <&sdc1_sleep &sd_cd>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <110 6>; + + sd_cd: sd-cd-state { + pins = "gpio103"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart1 { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index da1704061d58..9b93f6501d55 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -8,9 +8,12 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sdx75.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -405,7 +408,42 @@ }; }; - smem: qcom,smem { + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smem: smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; @@ -441,6 +479,37 @@ #power-domain-cells = <1>; }; + ipcc: mailbox@408000 { + compatible = "qcom,sdx75-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + gpi_dma: dma-controller@900000 { + compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00900000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0xf6 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x2000>; @@ -457,6 +526,52 @@ ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>, + <&gpi_dma 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>, + <&gpi_dma 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + uart1: serial@984000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00984000 0x0 0x4000>; @@ -475,6 +590,229 @@ "sleep"; status = "disabled"; }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>, + <&gpi_dma 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>, + <&gpi_dma 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>, + <&gpi_dma 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>, + <&gpi_dma 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>, + <&gpi_dma 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>, + <&gpi_dma 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>, + <&gpi_dma 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0099c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>, + <&gpi_dma 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0099c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>, + <&gpi_dma 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; }; usb_hsphy: phy@ff4000 { @@ -538,6 +876,59 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sdx75-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + + sdhc: mmc@8804000 { + compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + iommus = <&apps_smmu 0x00a0 0x0>; + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + usb: usb@a6f8800 { compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; reg = <0x0 0x0a6f8800 0x0 0x400>; @@ -627,6 +1018,17 @@ interrupt-controller; }; + aoss_qmp: power-controller@c310000 { + compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c310000 0 0x1000>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + spmi_bus: spmi@c400000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c400000 0x0 0x3000>, @@ -661,6 +1063,145 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "qup_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "qup_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio116", "gpio117"; + function = "qup_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio11"; + function = "qup_se0"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup_se0"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio17"; + function = "qup_se2"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio16"; + function = "qup_se2"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio55"; + function = "qup_se3"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup_se3"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio115"; + function = "qup_se6"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio112", "gpio113", "gpio114"; + function = "qup_se6"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio119"; + function = "qup_se7"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio116", "gpio117", "gpio118"; + function = "qup_se7"; + drive-strength = <6>; + bias-pull-down; + }; + + qup_uart4_cts_rts: qup-uart4-cts-rts-state { + /* CTS, RTS */ + pins = "gpio52", "gpio53"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart4_default: qup-uart4-default-state { + /* TX, RX */ + pins = "gpio54", "gpio55"; + function = "qup_se3"; + drive-strength = <2>; + bias-pull-up; + }; + qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { tx-pins { pins = "gpio12"; @@ -683,6 +1224,46 @@ drive-strength = <2>; bias-pull-down; }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; apps_smmu: iommu@15000000 { diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index 2c7a12983dae..9153a5a55ed9 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -240,6 +240,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index 603c962661cc..9c9919e78fbd 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -29,6 +29,14 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; }; cpus { @@ -39,10 +47,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_0: l2-cache { @@ -63,10 +73,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_100: l2-cache { @@ -81,10 +93,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_200: l2-cache { @@ -99,10 +113,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_300: l2-cache { @@ -117,10 +133,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_400>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_400: l2-cache { @@ -135,10 +153,12 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_500>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_500: l2-cache { @@ -153,10 +173,12 @@ device_type = "cpu"; compatible = "arm,cortex-a78"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_600: l2-cache { @@ -171,10 +193,12 @@ device_type = "cpu"; compatible = "arm,cortex-a78"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_700>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_700: l2-cache { @@ -268,9 +292,14 @@ reg = <0x0 0xa0000000 0x0 0x0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -526,6 +555,19 @@ }; }; + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm4450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 98eb072fa912..4a30024aa48f 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -234,6 +234,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 9ed062150aaf..e374733f3b85 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1088,6 +1088,8 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; + resets = <&gcc GCC_SDCC1_BCR>; + power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0x00c0 0x0>; @@ -1231,6 +1233,8 @@ "ref_aux", "qref"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1656,6 +1660,7 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + snps,parkmode-disable-ss-quirk; usb-role-switch; @@ -3012,8 +3017,6 @@ thermal-zones { mapss-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -3032,8 +3035,6 @@ }; cdsp-hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -3052,8 +3053,6 @@ }; wlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -3072,8 +3071,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -3092,8 +3089,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -3112,8 +3107,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -3132,8 +3125,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -3158,8 +3149,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -3184,8 +3173,6 @@ }; cpu6-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -3210,8 +3197,6 @@ }; cpu7-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -3236,8 +3221,6 @@ }; cpu45-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -3262,8 +3245,6 @@ }; cpu67-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -3288,8 +3269,6 @@ }; cpu0123-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -3314,8 +3293,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -3334,8 +3311,6 @@ }; display-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -3354,8 +3329,8 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; + thermal-sensors = <&tsens0 15>; cooling-maps { @@ -3367,13 +3342,13 @@ trips { gpu_alert0: trip-point0 { - temperature = <115000>; - hysteresis = <5000>; + temperature = <85000>; + hysteresis = <1000>; type = "passive"; }; trip-point1 { - temperature = <125000>; + temperature = <110000>; hysteresis = <1000>; type = "critical"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 54da053a8042..9d78bb3f7190 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -359,6 +359,7 @@ }; &usb_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "high-speed"; dr_mode = "peripheral"; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 08046f866f60..dcd05f303b78 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -90,8 +90,6 @@ thermal-zones { rf-pa0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 0>; trips { @@ -104,8 +102,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <5000>; thermal-sensors = <&pm6125_adc_tm 1>; trips { @@ -118,8 +114,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 2>; trips { @@ -132,8 +126,6 @@ }; rf-pa1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 3>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index a49d3ebb1931..994fb0412fcb 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -84,8 +84,6 @@ thermal-zones { rf-pa0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 0>; trips { @@ -98,8 +96,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <5000>; thermal-sensors = <&pm6125_adc_tm 1>; trips { @@ -112,8 +108,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm6125_adc_tm 2>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 98ab08356088..777c380c2fa0 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -1588,10 +1588,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 0xf08 - GIC_PPI 2 0xf08 - GIC_PPI 3 0xf08 - GIC_PPI 0 0xf08>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index dddd6e44d280..bf23033a294e 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -293,7 +293,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <22 0x2008>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm6350_l11>; avdd-supply = <&touch_en_vreg>; @@ -375,6 +375,7 @@ }; &usb_1_dwc3 { + /delete-property/ usb-role-switch; maximum-speed = "super-speed"; dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 84ff20a96c83..7986ddb30f6e 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1197,6 +1197,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -1321,6 +1323,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -1580,6 +1583,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -1713,10 +1717,39 @@ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; + orientation-switch; + #clock-cells = <1>; #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; dc_noc: interconnect@9160000 { @@ -1890,8 +1923,30 @@ snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -2831,9 +2886,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -2846,9 +2898,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2861,9 +2910,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 2>; trips { @@ -2876,9 +2922,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -2891,9 +2934,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -2919,9 +2959,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -2947,9 +2984,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -2975,9 +3009,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -3003,9 +3034,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -3031,9 +3059,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -3059,9 +3084,6 @@ }; cpu6-left-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -3087,9 +3109,6 @@ }; cpu6-right-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -3115,9 +3134,6 @@ }; cpu7-left-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -3143,9 +3159,6 @@ }; cpu7-right-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 12>; trips { @@ -3171,9 +3184,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -3186,9 +3196,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -3201,9 +3208,6 @@ }; cwlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 1>; trips { @@ -3216,9 +3220,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -3231,21 +3232,20 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <95000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; gpuss0-crit { - temperature = <115000>; - hysteresis = <0>; + temperature = <110000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -3259,21 +3259,20 @@ }; gpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <250>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <95000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; gpuss1-crit { - temperature = <115000>; - hysteresis = <0>; + temperature = <110000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -3287,9 +3286,6 @@ }; modem-core0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -3302,9 +3298,6 @@ }; modem-core1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -3317,9 +3310,6 @@ }; modem-scl-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -3332,9 +3322,6 @@ }; modem-vec-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -3347,9 +3334,6 @@ }; npu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { @@ -3362,9 +3346,6 @@ }; q6-hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -3377,9 +3358,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 11>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index cca2c2eb88ad..e04a3b8f81c5 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -142,7 +142,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <22 0x2008>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm6125_l13>; avdd-supply = <&touch_avdd>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index f40509d91bbd..ddea681b536d 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1837,9 +1837,6 @@ thermal-zones { mapss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 0>; trips { @@ -1864,9 +1861,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 1>; trips { @@ -1891,9 +1885,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 2>; trips { @@ -1918,9 +1909,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 3>; trips { @@ -1945,9 +1933,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 4>; trips { @@ -1972,9 +1957,6 @@ }; cpu4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 5>; trips { @@ -1999,9 +1981,6 @@ }; cpu5-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 6>; trips { @@ -2026,9 +2005,6 @@ }; cluster0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 7>; trips { @@ -2053,9 +2029,6 @@ }; cluster1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 8>; trips { @@ -2080,9 +2053,6 @@ }; cpu6-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 9>; trips { @@ -2107,9 +2077,6 @@ }; cpu7-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 10>; trips { @@ -2134,9 +2101,6 @@ }; cpu-unk0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 11>; trips { @@ -2161,9 +2125,6 @@ }; cpu-unk1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 12>; trips { @@ -2188,9 +2149,6 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 13>; trips { @@ -2215,9 +2173,6 @@ }; gpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens0 14>; trips { @@ -2242,9 +2197,6 @@ }; mapss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 0>; trips { @@ -2269,9 +2221,6 @@ }; cwlan-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 1>; trips { @@ -2296,9 +2245,6 @@ }; audio-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 2>; trips { @@ -2323,9 +2269,6 @@ }; ddr-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 3>; trips { @@ -2350,9 +2293,6 @@ }; q6hvx-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 4>; trips { @@ -2377,9 +2317,6 @@ }; camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 5>; trips { @@ -2404,9 +2341,6 @@ }; mdm-core0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 6>; trips { @@ -2431,9 +2365,6 @@ }; mdm-core1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 7>; trips { @@ -2458,9 +2389,6 @@ }; mdm-vec-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 8>; trips { @@ -2485,9 +2413,6 @@ }; msm-scl-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 9>; trips { @@ -2512,9 +2437,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tsens1 10>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index bc67e8c1fe4d..2ee2561b57b1 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -19,6 +19,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" @@ -92,10 +93,22 @@ }; }; + msm_therm_sensor: thermal-sensor-msm { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + + rear_cam_sensor: thermal-sensor-rear-cam { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + thermal-zones { chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -108,8 +121,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -120,6 +131,119 @@ }; }; }; + + pa0-thermal { + thermal-sensors = <&pm6150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa1-thermal { + thermal-sensors = <&pm6150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pm6150l_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&rear_cam_sensor>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rfc-flash-thermal { + thermal-sensors = <&pm6150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&msm_therm_sensor>; + + trips { + trip0 { + temperature = <45000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <55000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; }; }; @@ -134,124 +258,145 @@ qcom,pmic-id = "a"; vreg_s1a: smps1 { + regulator-name = "vreg_s1a"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; vreg_s2a: smps2 { + regulator-name = "vreg_s2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <2048000>; }; vreg_l2a: ldo2 { + regulator-name = "vreg_l2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; regulator-min-microvolt = <352000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12a: ldo12 { + regulator-name = "vreg_l12a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; regulator-min-microvolt = <570000>; regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14a: ldo14 { + regulator-name = "vreg_l14a"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15a: ldo15 { + regulator-name = "vreg_l15a"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16a: ldo16 { + regulator-name = "vreg_l16a"; regulator-min-microvolt = <830000>; regulator-max-microvolt = <921000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a: ldo18 { + regulator-name = "vreg_l18a"; regulator-min-microvolt = <788000>; regulator-max-microvolt = <1049000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19a: ldo19 { + regulator-name = "vreg_l19a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l20a: ldo20 { + regulator-name = "vreg_l20a"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l21a: ldo21 { + regulator-name = "vreg_l21a"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <825000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l22a: ldo22 { + regulator-name = "vreg_l22a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -263,41 +408,48 @@ qcom,pmic-id = "e"; vreg_s8e: smps8 { + regulator-name = "vreg_s8e"; regulator-min-microvolt = <313000>; regulator-max-microvolt = <1395000>; }; vreg_l1e: ldo1 { + regulator-name = "vreg_l1e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2e: ldo2 { + regulator-name = "vreg_l2e"; regulator-min-microvolt = <1170000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3e: ldo3 { + regulator-name = "vreg_l3e"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1299000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4e: ldo4 { + regulator-name = "vreg_l4e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5e: ldo5 { + regulator-name = "vreg_l5e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -307,18 +459,21 @@ }; vreg_l7e: ldo7 { + regulator-name = "vreg_l7e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9e: ldo9 { + regulator-name = "vreg_l9e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -328,18 +483,21 @@ }; vreg_l10e: ldo10 { + regulator-name = "vreg_l10e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11e: ldo11 { + regulator-name = "vreg_l11e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <5492000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -407,7 +565,79 @@ }; &i2c10 { - /* PM8008 PMIC @ 8 and 9 */ + clock-frequency = <400000>; + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8e>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s2a>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2904000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3140000>; + }; + }; + }; + /* PX8618 @ 26 */ /* SMB1395 PMIC @ 34 */ /* awinic,aw8695 @ 5a */ @@ -462,6 +692,91 @@ status = "okay"; }; +&pm6150l_adc { + pinctrl-0 = <&pm6150l_adc_default>; + pinctrl-names = "default"; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "pa_therm1"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "msm_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "pa_therm0"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@53 { + reg = <ADC5_GPIO2_100K_PU>; + label = "rear_cam_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@54 { + reg = <ADC5_GPIO3_100K_PU>; + label = "rear_cam_flash_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@55 { + reg = <ADC5_GPIO4_100K_PU>; + label = "quiet_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; +}; + +&pm6150l_adc_tm { + status = "okay"; + + pa-therm1@0 { + reg = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + pa-therm0@1 { + reg = <1>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + rear-cam-flash-therm@2 { + reg = <2>; + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + quiet-therm@3 { + reg = <3>; + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pm6150l_flash { status = "okay"; @@ -484,6 +799,14 @@ }; }; +&pm6150l_gpios { + pm6150l_adc_default: adc-default-state { + pins = "gpio6", "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + &pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; @@ -543,6 +866,64 @@ }; }; +&pm7250b_typec { + vdd-pdphy-supply = <&vreg_l3a>; + + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + /* + * Disable USB Power Delivery for now, seems to need extra work + * to support role switching while also letting the battery + * charge still - without charger driver + */ + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm7250b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; + }; + }; + + port@1 { + reg = <1>; + pm7250b_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm7250b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1500000>; + status = "okay"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -673,6 +1054,22 @@ */ bias-pull-up; }; + + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio58"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; &uart1 { @@ -726,7 +1123,11 @@ &usb_1_dwc3 { maximum-speed = "super-speed"; - dr_mode = "peripheral"; + dr_mode = "otg"; +}; + +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm7250b_hs_in>; }; &usb_1_hsphy { @@ -744,6 +1145,10 @@ status = "okay"; }; +&usb_1_qmpphy_out { + remote-endpoint = <&pm7250b_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 6cb6f503fdac..bac08f00b303 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -470,7 +470,6 @@ &mdss_dp_out { data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss_dsi0 { @@ -556,7 +555,7 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { + pm8150b_hs_in: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -676,18 +675,10 @@ orientation-switch; }; -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp_out>; -}; - &usb_1_qmpphy_out { remote-endpoint = <&pm8150b_typec_mux_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &usb_2_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l3c_1p2>; @@ -708,11 +699,7 @@ }; &usb_1_dwc3_hs { - remote-endpoint = <&pm8150b_role_switch_in>; -}; - -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + remote-endpoint = <&pm8150b_hs_in>; }; &usb_2_dwc3 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ff22e4346660..3e236adb9397 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/qcom,dispcc-sm8150.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,videocc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8150.h> #include <dt-bindings/thermal/thermal.h> @@ -3507,6 +3508,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3514,6 +3516,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; }; }; }; @@ -3672,6 +3675,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -3735,6 +3739,19 @@ }; }; + videocc: clock-controller@ab00000 { + compatible = "qcom,sm8150-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; @@ -3894,6 +3911,7 @@ reg = <1>; mdss_dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; }; }; }; @@ -4577,7 +4595,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -4621,7 +4638,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -4665,7 +4681,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -4709,7 +4724,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -4753,7 +4767,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -4797,7 +4810,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -4841,7 +4853,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -4885,7 +4896,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -4929,7 +4939,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -4973,7 +4982,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -5017,7 +5025,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -5061,7 +5068,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -5105,7 +5111,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -5120,7 +5125,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -5140,7 +5144,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -5160,7 +5163,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -5173,16 +5175,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -5197,7 +5210,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -5212,7 +5224,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -5227,7 +5238,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -5242,7 +5252,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -5257,7 +5266,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -5272,7 +5280,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -5287,7 +5294,6 @@ modem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -5302,7 +5308,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -5317,7 +5322,6 @@ modem-vec-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 9>; @@ -5332,7 +5336,6 @@ modem-scl-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 10>; @@ -5347,7 +5350,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -5360,10 +5362,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7ef99038cb37..21b2ca1def83 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -53,8 +53,6 @@ thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 0>; trips { @@ -67,8 +65,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150b_adc_tm 0>; trips { @@ -81,8 +77,6 @@ }; mmw-pa1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 2>; trips { @@ -95,8 +89,6 @@ }; mmw-pa2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 2>; trips { @@ -109,8 +101,6 @@ }; skin-msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 1>; trips { @@ -123,8 +113,6 @@ }; skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 1>; trips { @@ -137,8 +125,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 0>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index e07d0311ecb5..f6870d3f2886 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -520,7 +520,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <39 0x2008>; + interrupts = <39 IRQ_TYPE_LEVEL_LOW>; /* It's "vddio" downstream but it works anyway! */ vdd-supply = <&vreg_l1c_1p8>; avdd-supply = <&vreg_l10c_3p3>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 41f117474872..3596dd328c31 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -659,8 +659,8 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { - remote-endpoint = <&usb_1_role_switch_out>; + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; }; }; }; @@ -725,8 +725,8 @@ status = "okay"; }; -&usb_1_role_switch_out { - remote-endpoint = <&pm8150b_role_switch_in>; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8ccade628f1f..9d6c97d1fd9d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2204,7 +2204,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2580,6 +2580,8 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; + power-domains = <&gcc UFS_PHY_GDSC>; + #phy-cells = <0>; status = "disabled"; @@ -3936,6 +3938,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3947,6 +3951,10 @@ port@1 { reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; }; port@2 { @@ -4225,8 +4233,24 @@ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_role_switch_out: endpoint {}; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; }; }; }; @@ -6275,7 +6299,6 @@ thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -6319,7 +6342,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -6363,7 +6385,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -6407,7 +6428,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -6451,7 +6471,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -6495,7 +6514,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -6539,7 +6557,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -6583,7 +6600,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -6627,7 +6643,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -6671,7 +6686,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -6715,7 +6729,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -6759,7 +6772,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -6803,7 +6815,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -6818,7 +6829,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -6838,7 +6848,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -6858,7 +6867,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 15>; @@ -6871,16 +6879,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -6895,7 +6914,6 @@ wlan-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -6910,7 +6928,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -6925,7 +6942,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -6940,7 +6956,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -6955,7 +6970,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -6970,7 +6984,6 @@ compute-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -6985,7 +6998,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -7000,7 +7012,6 @@ gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -7013,10 +7024,22 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 4c25ab2f5670..895adce59e75 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -486,17 +486,10 @@ &mdss_dp { status = "okay"; +}; - ports { - port@1 { - reg = <1>; - - mdss_dp0_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; - }; - }; - }; +&mdss_dp_out { + data-lanes = <0 1>; }; &mpss { @@ -864,10 +857,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { status = "okay"; @@ -881,22 +870,12 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p88>; - - orientation-switch; -}; - -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; }; &usb_1_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &usb_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index f7c4700f00c3..38ee0850c335 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -301,8 +301,18 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x1 { + compatible = "arm,cortex-x1-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -1779,6 +1789,8 @@ "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2256,6 +2268,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2273,6 +2287,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -2280,6 +2295,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; }; }; }; @@ -2405,6 +2421,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -2626,6 +2643,14 @@ remote-endpoint = <&dpu_intf0_out>; }; }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; }; dp_opp_table: opp-table { @@ -3665,7 +3690,6 @@ thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 1>; @@ -3709,7 +3733,6 @@ cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 2>; @@ -3753,7 +3776,6 @@ cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 3>; @@ -3797,7 +3819,6 @@ cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 4>; @@ -3841,7 +3862,6 @@ cpu4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 7>; @@ -3885,7 +3905,6 @@ cpu5-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 8>; @@ -3929,7 +3948,6 @@ cpu6-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 9>; @@ -3973,7 +3991,6 @@ cpu7-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 10>; @@ -4017,7 +4034,6 @@ cpu4-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 11>; @@ -4061,7 +4077,6 @@ cpu5-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 12>; @@ -4105,7 +4120,6 @@ cpu6-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 13>; @@ -4149,7 +4163,6 @@ cpu7-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 14>; @@ -4193,7 +4206,6 @@ aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 0>; @@ -4208,7 +4220,6 @@ cluster0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 5>; @@ -4228,7 +4239,6 @@ cluster1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens0 6>; @@ -4248,7 +4258,6 @@ aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 0>; @@ -4263,7 +4272,6 @@ gpu-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 1>; @@ -4276,16 +4284,27 @@ trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; gpu-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 2>; @@ -4298,16 +4317,27 @@ trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; nspss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 3>; @@ -4322,7 +4352,6 @@ nspss2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 4>; @@ -4337,7 +4366,6 @@ nspss3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 5>; @@ -4352,7 +4380,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 6>; @@ -4367,7 +4394,6 @@ mem-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 7>; @@ -4382,7 +4408,6 @@ modem1-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 8>; @@ -4397,7 +4422,6 @@ modem2-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 9>; @@ -4412,7 +4436,6 @@ modem3-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 10>; @@ -4427,7 +4450,6 @@ modem4-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 11>; @@ -4442,7 +4464,6 @@ camera-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 12>; @@ -4457,7 +4478,6 @@ cam-bottom-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens1 13>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 3be46b56c723..a754b8fe9167 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -138,7 +138,7 @@ thermal-zones { camera-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -152,7 +152,7 @@ rear-tof-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 5>; trips { @@ -166,7 +166,7 @@ skin-msm-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -180,7 +180,7 @@ therm1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -194,7 +194,7 @@ therm2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 6>; trips { @@ -208,7 +208,7 @@ usb-conn-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 7>; trips { @@ -222,7 +222,7 @@ wide-rfc-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -235,8 +235,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -674,17 +672,10 @@ &mdss_dp0 { status = "okay"; +}; - ports { - port@1 { - reg = <1>; - - mdss_dp0_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&usb_1_qmpphy_dp_in>; - }; - }; - }; +&mdss_dp0_out { + data-lanes = <0 1>; }; &pcie0 { @@ -1114,10 +1105,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { status = "okay"; @@ -1131,22 +1118,12 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; - - orientation-switch; -}; - -&usb_1_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; }; &usb_1_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_1_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &vamacro { pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 8b29fcf483a3..17dbb67868ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -488,7 +488,7 @@ compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; - interrupts = <21 0x2008>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&pm8350c_l2>; avdd-supply = <&pm8350c_l3>; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 616461fcbab9..9bafb3b350ff 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -754,8 +754,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <0>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -1803,6 +1803,12 @@ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", "cpu-pcie"; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, <&pcie0_phy>, @@ -1845,8 +1851,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + }; + pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; @@ -1932,6 +1965,12 @@ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", "cpu-pcie"; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, <&pcie1_phy>, @@ -1972,8 +2011,56 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; @@ -2001,7 +2088,7 @@ "pipe"; clock-output-names = "pcie_1_pipe_clk"; - #clock-cells = <0>; + #clock-cells = <1>; #phy-cells = <0>; @@ -2304,6 +2391,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2321,6 +2410,7 @@ reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -2328,6 +2418,7 @@ reg = <2>; usb_1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3119,6 +3210,14 @@ remote-endpoint = <&dpu_intf0_out>; }; }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_dp_in>; + }; + }; }; dp_opp_table: opp-table { @@ -4362,9 +4461,10 @@ compatible = "qcom,sm8450-llcc"; reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, - <0 0x19a00000 0 0x80000>; + <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", - "llcc3_base", "llcc_broadcast_base"; + "llcc3_base", "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4429,6 +4529,8 @@ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, <&gcc GCC_UFS_0_CLKREF_EN>; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -4584,6 +4686,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; @@ -4610,8 +4713,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -4630,8 +4731,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -4650,8 +4749,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -4670,8 +4767,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -4690,8 +4785,6 @@ }; cpuss4-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -4710,8 +4803,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -4736,8 +4827,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -4762,8 +4851,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -4788,8 +4875,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -4814,8 +4899,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -4840,8 +4923,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -4866,8 +4947,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -4892,8 +4971,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -4918,8 +4995,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -4945,7 +5020,7 @@ gpu-top-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens0 14>; cooling-maps { @@ -4956,35 +5031,29 @@ }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_top_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu_top_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpu-bottom-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens0 15>; cooling-maps { @@ -4995,35 +5064,27 @@ }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_bottom_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu_bottom_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -5042,8 +5103,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5068,8 +5127,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5094,8 +5151,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5120,8 +5175,6 @@ }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; trips { @@ -5147,7 +5200,7 @@ cdsp0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 5>; trips { @@ -5179,7 +5232,7 @@ cdsp1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 6>; trips { @@ -5211,7 +5264,7 @@ cdsp2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 7>; trips { @@ -5242,8 +5295,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; trips { @@ -5263,7 +5314,7 @@ mem-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 9>; trips { @@ -5288,8 +5339,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 10>; trips { @@ -5320,8 +5369,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 11>; trips { @@ -5352,8 +5399,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 12>; trips { @@ -5384,8 +5429,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 13>; trips { @@ -5416,8 +5459,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -5436,8 +5477,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index 12d60a0ee095..2e12219006c9 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -940,7 +940,6 @@ }; &mdss_dp0_out { - remote-endpoint = <&usb_dp_qmpphy_dp_in>; data-lanes = <0 1>; }; @@ -979,10 +978,6 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; -}; - &pm8550_gpios { sdc2_card_det_n: sdc2-card-det-state { pins = "gpio12"; @@ -1111,6 +1106,7 @@ #sound-dai-cells = <0>; sound-name-prefix = "SpkrLeft"; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ @@ -1128,6 +1124,7 @@ #sound-dai-cells = <0>; sound-name-prefix = "SpkrRight"; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1258,19 +1255,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -1284,23 +1272,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p88>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 3d4ad5aac70f..ab447fc252f7 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -736,11 +736,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; }; &pcie0 { @@ -847,6 +842,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845 */ @@ -860,6 +856,7 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -951,19 +948,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -977,23 +965,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p91>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 92f015017418..774bdfcffec3 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -214,6 +214,68 @@ regulator-always-on; regulator-boot-on; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>; + + wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s5g_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s2g_0p85>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p8-supply = <&vreg_s6g_1p86>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -720,17 +782,6 @@ status = "okay"; }; -&gcc { - clocks = <&bi_tcxo_div2>, <&sleep_clk>, - <&pcie0_phy>, - <&pcie1_phy>, - <0>, - <&ufs_mem_phy 0>, - <&ufs_mem_phy 1>, - <&ufs_mem_phy 2>, - <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; -}; - &gpi_dma1 { status = "okay"; }; @@ -807,11 +858,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - status = "disabled"; }; &pcie0 { @@ -824,6 +870,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; @@ -907,8 +970,15 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; +&pmk8550_gpios { + pmk8550_sleep_clk: sleep-clk-state { + pins = "gpio3"; + function = "func1"; + input-disable; + output-enable; + bias-disable; + power-source = <0>; + }; }; &qupv3_id_0 { @@ -955,6 +1025,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ @@ -968,6 +1039,7 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1084,6 +1156,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart7 { @@ -1135,19 +1214,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; @@ -1161,23 +1231,13 @@ vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p88>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts new file mode 100644 index 000000000000..3d351e90bb39 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> + * Copyright (c) 2024, David Wronek <david@mainlining.org> + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8550.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/delete-node/ &adspslpi_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mpss_dsm_mem; +/delete-node/ &mpss_mem; +/delete-node/ &rmtfs_mem; + +/ { + model = "Samsung Galaxy Z Fold5"; + compatible = "samsung,q5q", "qcom,sm8550"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@b8000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xb8000000 0x0 0x2b00000>; + width = <2176>; + height = <1812>; + stride = <(2176 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + adspslpi_mem: adspslpi@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x59b4000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0 0x9c900000 0 0x2000000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@d4d00000 { + reg = <0x0 0xd4d00000 0x0 0x3300000>; + no-map; + }; + + mpss_mem: mpss@8b400000 { + reg = <0x0 0x8b400000 0x0 0xfc00000>; + no-map; + }; + + rmtfs_mem: rmtfs-region@d4a80000 { + reg = <0x0 0xd4a80000 0x0 0x280000>; + no-map; + }; + + /* + * The bootloader will only keep display hardware enabled + * if this memory region is named exactly 'splash_region' + */ + splash_region@b8000000 { + reg = <0x0 0xb8000000 0x0 0x2b00000>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "disabled"; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mdt", + "qcom/sm8550/adsp_dtb.mdt"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mdt", + "qcom/sm8550/cdsp_dtb.mdt"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mdt", + "qcom/sm8550/modem_dtb.mdt"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <36 4>, <50 2>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts index 85e0d3d66e16..85d487ef80a0 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -737,19 +737,10 @@ status = "okay"; }; -&usb_1_dwc3 { - dr_mode = "otg"; - usb-role-switch; -}; - &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&pm8550vs_2_l1>; vdda12-supply = <&pm8550vs_2_l3>; @@ -761,7 +752,6 @@ &usb_dp_qmpphy { vdda-phy-supply = <&pm8550vs_2_l3>; vdda-pll-supply = <&pm8550ve_l3>; - orientation-switch; status = "okay"; }; @@ -770,10 +760,6 @@ remote-endpoint = <&pmic_glink_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index bc5aeb05ffc3..4c9820adcf52 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -58,11 +58,6 @@ clock-mult = <1>; clock-div = <2>; }; - - pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; }; cpus { @@ -357,8 +352,23 @@ reg = <0 0xa0000000 0 0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a510 { + compatible = "arm,cortex-a510-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a710 { + compatible = "arm,cortex-a710-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a715 { + compatible = "arm,cortex-a715-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x3 { + compatible = "arm,cortex-x3-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -776,8 +786,8 @@ #power-domain-cells = <1>; clocks = <&bi_tcxo_div2>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <&pcie_1_phy_aux_clk>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -1774,7 +1784,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -1928,7 +1938,7 @@ power-domains = <&gcc PCIE_1_PHY_GDSC>; - #clock-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie1_pipe_clk"; #phy-cells = <0>; @@ -2910,6 +2920,7 @@ port@1 { reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; }; }; @@ -3169,6 +3180,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -3186,6 +3199,7 @@ reg = <1>; usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3193,6 +3207,7 @@ reg = <2>; usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3264,6 +3279,7 @@ snps,has-lpm-erratum; tx-fifo-resize; dma-coherent; + usb-role-switch; ports { #address-cells = <1>; @@ -3280,6 +3296,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; }; }; @@ -4295,12 +4312,14 @@ <0 0x25200000 0 0x200000>, <0 0x25400000 0 0x200000>, <0 0x25600000 0 0x200000>, - <0 0x25800000 0 0x200000>; + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4571,8 +4590,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -4591,8 +4608,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -4611,8 +4626,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -4631,8 +4644,6 @@ }; cpuss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -4651,8 +4662,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -4671,8 +4680,6 @@ }; cpu3-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -4697,8 +4704,6 @@ }; cpu3-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -4723,8 +4728,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -4749,8 +4752,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -4775,8 +4776,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -4801,8 +4800,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -4827,8 +4824,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -4853,8 +4848,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -4879,8 +4872,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -4905,8 +4896,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -4931,8 +4920,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 15>; trips { @@ -4957,8 +4944,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -4977,8 +4962,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5003,8 +4986,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5029,8 +5010,6 @@ }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5056,7 +5035,7 @@ cdsp0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; trips { @@ -5088,7 +5067,7 @@ cdsp1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; trips { @@ -5120,7 +5099,7 @@ cdsp2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; trips { @@ -5152,7 +5131,7 @@ cdsp3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; trips { @@ -5183,8 +5162,6 @@ }; video-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; trips { @@ -5204,7 +5181,7 @@ mem-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 9>; trips { @@ -5229,8 +5206,6 @@ }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 10>; trips { @@ -5261,8 +5236,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 11>; trips { @@ -5293,8 +5266,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 12>; trips { @@ -5325,8 +5296,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 13>; trips { @@ -5357,8 +5326,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -5377,8 +5344,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { @@ -5397,8 +5362,6 @@ }; aoss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 0>; trips { @@ -5418,312 +5381,264 @@ gpuss-0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 1>; cooling-maps { map0 { - trip = <&gpu0_junction_config>; + trip = <&gpu0_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu0_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu0_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 2>; cooling-maps { map0 { - trip = <&gpu1_junction_config>; + trip = <&gpu1_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu1_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu1_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 3>; cooling-maps { map0 { - trip = <&gpu2_junction_config>; + trip = <&gpu2_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu2_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu2_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; cooling-maps { map0 { - trip = <&gpu3_junction_config>; + trip = <&gpu3_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu3_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu3_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; cooling-maps { map0 { - trip = <&gpu4_junction_config>; + trip = <&gpu4_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu4_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu4_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; cooling-maps { map0 { - trip = <&gpu5_junction_config>; + trip = <&gpu5_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu5_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu5_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-6-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; cooling-maps { map0 { - trip = <&gpu6_junction_config>; + trip = <&gpu6_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu6_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu6_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; gpuss-7-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; cooling-maps { map0 { - trip = <&gpu7_junction_config>; + trip = <&gpu7_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { - thermal-engine-config { - temperature = <125000>; + gpu7_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; + type = "hot"; }; - reset-mon-config { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; - }; - - gpu7_junction_config: junction-config { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso new file mode 100644 index 000000000000..cb102535838d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +/* + * Display Card kit overlay + * This requires S5702 Switch 7 to be turned to OFF to route DSI0 to the display panel + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; +/plugin/; + +/* Disable HDMI bridge related nodes (mutually exclusive with the display card) */ + +&i2c6 { + status = "disabled"; +}; + +<9611_1v2 { + status = "disabled"; +}; + +<9611_3v3 { + status = "disabled"; +}; + +&vreg_bob_3v3 { + status = "disabled"; +}; + +<9611_codec { + status = "disabled"; +}; + +&mdss_dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + remote-endpoint = <&panel0_in>; + }; + }; + }; +}; + +&spi4 { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync: mdp-vsync-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts new file mode 100644 index 000000000000..591e6ab9bf5b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -0,0 +1,1355 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 HDK"; + compatible = "qcom,sm8650-hdk", "qcom,sm8650"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + panic-indicator; + }; + + led-2 { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_ORANGE>; + gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + lt9611_1v2: regulator-lt9611-1v2 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vreg_bob_3v3>; + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + + enable-active-high; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_bob_3v3: regulator-vreg-bob-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_BOB_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8650/ipa_fws.mbn"; + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; + }; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; + + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */ +&pm8550_pwm { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + +&qupv3_id_0 { + iommus = <&apps_smmu 0xa3 0x3>; + + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>, <74 1>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio85"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio28"; + function = "gpio"; + output-high; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index d04ceaa73c2b..c63822f5b127 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -59,7 +59,7 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_dp_qmpphy_out>; }; }; }; @@ -641,10 +641,6 @@ status = "okay"; }; -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; -}; - &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; @@ -755,6 +751,16 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ @@ -768,6 +774,16 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -853,10 +869,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -873,6 +885,10 @@ status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 4e94f7fe4d2d..b0d7927b708f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -203,6 +203,71 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -832,11 +897,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; }; &pcie0 { @@ -849,6 +909,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1i_0p88>; vdda-pll-supply = <&vreg_l3i_1p2>; @@ -1012,6 +1089,16 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ @@ -1025,6 +1112,16 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1143,6 +1240,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart14 { @@ -1211,10 +1315,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -1228,23 +1328,13 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 62a6e77730bc..9d9bbb9aca64 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4,10 +4,12 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8650-camcc.h> #include <dt-bindings/clock/qcom,sm8650-dispcc.h> #include <dt-bindings/clock/qcom,sm8650-gcc.h> #include <dt-bindings/clock/qcom,sm8650-gpucc.h> #include <dt-bindings/clock/qcom,sm8650-tcsr.h> +#include <dt-bindings/clock/qcom,sm8650-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> @@ -60,11 +62,6 @@ clock-mult = <1>; clock-div = <2>; }; - - pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; }; cpus { @@ -371,6 +368,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8650", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; }; @@ -394,8 +392,18 @@ reg = <0 0xa0000000 0 0>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu-a520 { + compatible = "arm,cortex-a520-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-a720 { + compatible = "arm,cortex-a720-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu-x4 { + compatible = "arm,cortex-x4-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; @@ -758,8 +766,8 @@ <&bi_tcxo_ao_div2>, <&sleep_clk>, <&pcie0_phy>, - <&pcie1_phy>, - <&pcie_1_phy_aux_clk>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, + <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -2208,7 +2216,7 @@ reg = <0 0x010c3000 0 0x1000>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { device_type = "pci"; compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; reg = <0 0x01c00000 0 0x3000>, @@ -2294,7 +2302,7 @@ status = "disabled"; - pcie@0 { + pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2336,7 +2344,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { device_type = "pci"; compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; reg = <0 0x01c08000 0 0x3000>, @@ -2467,7 +2475,7 @@ power-domains = <&gcc PCIE_1_PHY_GDSC>; - #clock-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie1_pipe_clk"; #phy-cells = <0>; @@ -2626,6 +2634,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -3309,6 +3318,30 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8650-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8650-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8650-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3675,6 +3708,7 @@ reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; }; }; @@ -3750,6 +3784,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -3767,6 +3803,7 @@ reg = <1>; usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; }; }; @@ -3774,6 +3811,7 @@ reg = <2>; usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; }; }; }; @@ -3864,6 +3902,7 @@ reg = <1>; usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; }; }; @@ -4982,12 +5021,14 @@ <0 0x25400000 0 0x200000>, <0 0x25200000 0 0x200000>, <0 0x25600000 0 0x200000>, - <0 0x25800000 0 0x200000>; + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -5328,8 +5369,6 @@ thermal-zones { aoss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { @@ -5348,8 +5387,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { @@ -5368,8 +5405,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { @@ -5388,8 +5423,6 @@ }; cpuss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { @@ -5408,8 +5441,6 @@ }; cpuss3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { @@ -5428,8 +5459,6 @@ }; cpu2-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { @@ -5454,8 +5483,6 @@ }; cpu2-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { @@ -5480,8 +5507,6 @@ }; cpu3-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { @@ -5506,8 +5531,6 @@ }; cpu3-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { @@ -5532,8 +5555,6 @@ }; cpu4-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { @@ -5558,8 +5579,6 @@ }; cpu4-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; trips { @@ -5584,8 +5603,6 @@ }; cpu5-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; trips { @@ -5610,8 +5627,6 @@ }; cpu5-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; trips { @@ -5636,8 +5651,6 @@ }; cpu6-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { @@ -5662,8 +5675,6 @@ }; cpu6-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { @@ -5688,8 +5699,6 @@ }; aoss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; trips { @@ -5708,8 +5717,6 @@ }; cpu7-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { @@ -5734,8 +5741,6 @@ }; cpu7-middle-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { @@ -5760,8 +5765,6 @@ }; cpu7-bottom-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; trips { @@ -5786,8 +5789,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; trips { @@ -5812,8 +5813,6 @@ }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; trips { @@ -5839,7 +5838,7 @@ nsphvx0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; trips { @@ -5859,7 +5858,7 @@ nsphvx1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; trips { @@ -5879,7 +5878,7 @@ nsphmx0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; trips { @@ -5899,7 +5898,7 @@ nsphmx1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 9>; trips { @@ -5919,7 +5918,7 @@ nsphmx2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 10>; trips { @@ -5939,7 +5938,7 @@ nsphmx3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 11>; trips { @@ -5959,7 +5958,7 @@ video-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 12>; trips { @@ -5979,7 +5978,7 @@ ddr-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens1 13>; trips { @@ -5998,8 +5997,6 @@ }; camera0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 14>; trips { @@ -6018,8 +6015,6 @@ }; camera1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens1 15>; trips { @@ -6038,8 +6033,6 @@ }; aoss2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 0>; trips { @@ -6059,19 +6052,32 @@ gpuss0-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + cooling-maps { + map0 { + trip = <&gpu0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu0_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss0-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6079,19 +6085,32 @@ gpuss1-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss1-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6099,19 +6118,32 @@ gpuss2-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + cooling-maps { + map0 { + trip = <&gpu2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss2-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6119,19 +6151,32 @@ gpuss3-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + cooling-maps { + map0 { + trip = <&gpu3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu3_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss3-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6139,19 +6184,32 @@ gpuss4-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + cooling-maps { + map0 { + trip = <&gpu4_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu4_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss4-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6159,19 +6217,32 @@ gpuss5-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + cooling-maps { + map0 { + trip = <&gpu5_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu5_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss5-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6179,19 +6250,32 @@ gpuss6-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + cooling-maps { + map0 { + trip = <&gpu6_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss6-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -6199,27 +6283,38 @@ gpuss7-thermal { polling-delay-passive = <10>; - polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + cooling-maps { + map0 { + trip = <&gpu7_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpu7_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; - gpuss7-critical { + trip-point2 { temperature = <110000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; }; modem0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 9>; trips { @@ -6238,8 +6333,6 @@ }; modem1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 10>; trips { @@ -6258,8 +6351,6 @@ }; modem2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 11>; trips { @@ -6278,8 +6369,6 @@ }; modem3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens2 12>; trips { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts new file mode 100644 index 000000000000..7fb980fcb307 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -0,0 +1,616 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "ASUS Vivobook S 15"; + compatible = "asus,vivobook-s15", "qcom,x1e80100"; + chassis-type = "laptop"; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side port, closer to the screen */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side port, farther from the screen */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + /* EC? @ 0x5b, 0x76 */ +}; + +&i2c7 { + clock-frequency = <400000>; + status = "okay"; + + /* PS8830 USB4 Retimer? @ 0x8 */ +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn", + "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "disabled"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index be6b1e7d07ce..6152bcd0bc1f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -49,6 +49,104 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + /* Right-side port */ + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + reserved-memory { linux,cma { compatible = "shared-dma-pool"; @@ -173,6 +271,20 @@ regulator-always-on; regulator-boot-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; }; &apps_rsc { @@ -655,11 +767,19 @@ }; &pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie6a_default>; + status = "okay"; }; &pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>; status = "okay"; @@ -804,6 +924,36 @@ bias-disable; }; + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -840,8 +990,8 @@ }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -849,6 +999,9 @@ }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -858,12 +1011,19 @@ &usb_1_ss0_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -871,6 +1031,9 @@ }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -880,12 +1043,19 @@ &usb_1_ss1_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -893,6 +1063,9 @@ }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -902,5 +1075,12 @@ &usb_1_ss2_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts new file mode 100644 index 000000000000..fbff558f5b07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -0,0 +1,929 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Lenovo Yoga Slim 7x"; + compatible = "lenovo,yoga-slim7x", "qcom,x1e80100"; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + /* Right-side port */ + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-LENOVO-Yoga-Slim7x"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT"; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@14 { + compatible = "hid-over-i2c"; + reg = <0x14>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn", + "qcom/x1e80100/LENOVO/83ED/adsp_dtbs.elf"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn", + "qcom/x1e80100/LENOVO/83ED/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_2_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi index 04301f772fbd..e34e70922cd3 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -3,10 +3,477 @@ * Copyright (c) 2024, Linaro Limited */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> / { + thermal-zones { + pm8550-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-2-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-3-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_3_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-4-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_4_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-5-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_5_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-6-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_6_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-8-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_8_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-9-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_9_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8010-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8010_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + /* PMK8380 */ + pmk8550: pmic@0 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8550_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8550_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + /* Not yet sure what blocks access */ + status = "reserved"; + }; + + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + + pmk8550_gpios: gpio@8800 { + compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8550_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380C */ + pm8550: pmic@1 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550_gpios: gpio@8800 { + compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + /* PMC8380VE */ + pm8550ve_2: pmic@2 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_2_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_2_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380 is actually not a PM8550 series rebrand */ + pmc8380_3: pmic@3 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_3_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_3_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_4: pmic@4 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_4_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_4_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_4_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_5: pmic@5 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_5_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_5_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_5_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_6: pmic@6 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_6_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_6_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_6_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_8: pmic@8 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_8_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_8_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_8_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_9: pmic@9 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_9_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_9_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_9_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8010: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; }; &spmi_bus1 { @@ -48,4 +515,19 @@ #phy-cells = <0>; }; }; + + smb2360_3: pmic@c { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_3_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 8f67c393b871..72a4f4138616 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -19,10 +19,131 @@ serial0 = &uart21; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + reserved-memory { linux,cma { compatible = "shared-dma-pool"; @@ -32,6 +153,66 @@ }; }; + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-QCP"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -59,6 +240,20 @@ regulator-always-on; regulator-boot-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; }; &apps_rsc { @@ -411,6 +606,16 @@ }; }; +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -466,11 +671,19 @@ }; &pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie6a_default>; + status = "okay"; }; &pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>; status = "okay"; @@ -502,6 +715,10 @@ status = "okay"; }; +&smb2360_3 { + status = "okay"; +}; + &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l2b_3p0>; @@ -517,6 +734,57 @@ vdd3-supply = <&vreg_l8b_3p0>; }; +&swr0 { + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + status = "okay"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + #sound-dai-cells = <0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + #sound-dai-cells = <0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { gpio-reserved-ranges = <33 3>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -528,6 +796,44 @@ drive-strength = <16>; bias-disable; }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie6a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart21 { @@ -536,8 +842,8 @@ }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -545,6 +851,9 @@ }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -554,12 +863,19 @@ &usb_1_ss0_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -567,6 +883,9 @@ }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -576,12 +895,19 @@ &usb_1_ss1_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -589,6 +915,9 @@ }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -598,5 +927,12 @@ &usb_1_ss2_dwc3 { dr_mode = "host"; - usb-role-switch; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 05e4d491ec18..7bca5fcd7d52 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/clock/qcom,x1e80100-gpucc.h> #include <dt-bindings/clock/qcom,x1e80100-tcsr.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> @@ -2505,6 +2506,66 @@ }; }; + tsens0: thermal-sensor@c271000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c271000 0 0x1000>, + <0 0x0c222000 0 0x1000>; + + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c272000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c272000 0 0x1000>, + <0 0x0c223000 0 0x1000>; + + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c273000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c273000 0 0x1000>, + <0 0x0c224000 0 0x1000>; + + interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c274000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c274000 0 0x1000>, + <0 0x0c225000 0 0x1000>; + + interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + usb_1_ss0_hsphy: phy@fd3000 { compatible = "qcom,x1e80100-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; @@ -2543,6 +2604,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss0_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; }; usb_1_ss1_hsphy: phy@fd9000 { @@ -2583,6 +2672,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp1_out>; + }; + }; + }; }; usb_1_ss2_hsphy: phy@fde000 { @@ -2623,6 +2740,34 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss2_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp2_out>; + }; + }; + }; }; cnoc_main: interconnect@1500000 { @@ -2987,6 +3132,200 @@ #reset-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43050c01", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + #cooling-cells = <2>; + + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + zap-shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/gen70500_zap.mbn"; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <16500000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <14398438>; + }; + + opp-925000000 { + opp-hz = /bits/ 64 <925000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <14398438>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <12449219>; + }; + + opp-744000000 { + opp-hz = /bits/ 64 <744000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <10687500>; + }; + + opp-687000000 { + opp-hz = /bits/ 64 <687000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <8171875>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <6074219>; + }; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3000000>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + opp-peak-kBps = <2136719>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-x185.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,x1e80100-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + gem_noc: interconnect@26400000 { compatible = "qcom,x1e80100-gem-noc"; reg = <0 0x26400000 0 0x311200>; @@ -3447,8 +3786,23 @@ dma-coherent; - port { - usb_1_ss2_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3516,8 +3870,15 @@ phy-names = "usb2-phy"; maximum-speed = "high-speed"; - port { - usb_2_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_2_dwc3_hs: endpoint { + }; }; }; }; @@ -3592,8 +3953,23 @@ dma-coherent; - port { - usb_1_ss0_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3675,8 +4051,23 @@ dma-coherent; - port { - usb_1_ss1_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>; + }; }; }; }; @@ -3862,6 +4253,7 @@ reg = <1>; mdss_dp0_out: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>; }; }; }; @@ -3944,6 +4336,7 @@ reg = <1>; mdss_dp1_out: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>; }; }; }; @@ -4023,6 +4416,10 @@ port@1 { reg = <1>; + + mdss_dp2_out: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>; + }; }; }; @@ -5157,6 +5554,129 @@ }; }; + pmu@24091000 { + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <2188000>; + }; + + opp-2 { + opp-peak-kBps = <3072000>; + }; + + opp-3 { + opp-peak-kBps = <6220800>; + }; + + opp-4 { + opp-peak-kBps = <6835200>; + }; + + opp-5 { + opp-peak-kBps = <8371200>; + }; + + opp-6 { + opp-peak-kBps = <10944000>; + }; + + opp-7 { + opp-peak-kBps = <12748800>; + }; + + opp-8 { + opp-peak-kBps = <14745600>; + }; + + opp-9 { + opp-peak-kBps = <16896000>; + }; + }; + }; + + /* cluster0 */ + pmu@240b3400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b3400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4800000>; + }; + + opp-1 { + opp-peak-kBps = <7464000>; + }; + + opp-2 { + opp-peak-kBps = <9600000>; + }; + + opp-3 { + opp-peak-kBps = <12896000>; + }; + + opp-4 { + opp-peak-kBps = <14928000>; + }; + + opp-5 { + opp-peak-kBps = <17064000>; + }; + }; + }; + + /* cluster2 */ + pmu@240b5400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b5400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + /* cluster1 */ + pmu@240b6400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + system-cache-controller@25000000 { compatible = "qcom,x1e80100-llcc"; reg = <0 0x25000000 0 0x200000>, @@ -5226,6 +5746,55 @@ label = "lpass"; qcom,remote-pid = <2>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + gpr { compatible = "qcom,gpr"; qcom,glink-channels = "adsp_apps"; @@ -5315,6 +5884,101 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x20>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x20>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x0c07 0x20>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x0c08 0x20>; + dma-coherent; + }; + + /* note: compute-cb@9 is secure */ + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x0c0c 0x20>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x0c0d 0x20>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x0c0e 0x20>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x0c0f 0x20>; + dma-coherent; + }; + }; }; }; }; @@ -5327,4 +5991,1158 @@ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mem-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu2-0-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-0-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-top-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-btm-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss2-top-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss2-btm-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp0-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp1-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp2-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp3-critical { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 5>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 6>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 7>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 8>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 9>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 10>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-6-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 11>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-7-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens3 12>; + + trips { + trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + trip-point2 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens3 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens3 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; }; |