summaryrefslogtreecommitdiff
path: root/include/rdma
AgeCommit message (Collapse)Author
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-13RDMA/nldev: Add support for RDMA monitoringChiara Meiohas
Introduce a new netlink command to allow rdma event monitoring. The rdma events supported now are IB device registration/unregistration and net device attachment/detachment. Example output of rdma monitor and the commands which trigger the events: $ rdma monitor $ rmmod mlx5_ib [UNREGISTER] dev 1 rocep8s0f1 [UNREGISTER] dev 0 rocep8s0f0 $ modprobe mlx5_ib [REGISTER] dev 2 mlx5_0 [NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2 [REGISTER] dev 3 mlx5_1 [NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3 $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev [UNREGISTER] dev 2 rocep8s0f0 [REGISTER] dev 4 mlx5_0 [NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2 $ echo 4 > /sys/class/net/eth2/device/sriov_numvfs [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7 [REGISTER] dev 5 mlx5_0 [NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8 [REGISTER] dev 6 mlx5_0 [NETDEV_ATTACH] dev 6 mlx5_0 port 1 netdev 12 eth9 [REGISTER] dev 7 mlx5_0 [NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10 [REGISTER] dev 8 mlx5_0 [NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11 $ echo 0 > /sys/class/net/eth2/device/sriov_numvfs [UNREGISTER] dev 5 rocep8s0f0v0 [UNREGISTER] dev 6 rocep8s0f0v1 [UNREGISTER] dev 7 rocep8s0f0v2 [UNREGISTER] dev 8 rocep8s0f0v3 [NETDEV_DETACH] dev 4 rdmap8s0f0 port 2 [NETDEV_DETACH] dev 4 rdmap8s0f0 port 3 [NETDEV_DETACH] dev 4 rdmap8s0f0 port 4 [NETDEV_DETACH] dev 4 rdmap8s0f0 port 5 Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909173025.30422-7-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-13RDMA/mlx5: Use IB set_netdev and get_netdev functionsChiara Meiohas
The IB layer provides a common interface to store and get net devices associated to an IB device port (ib_device_set_netdev() and ib_device_get_netdev()). Previously, mlx5_ib stored and managed the associated net devices internally. Replace internal net device management in mlx5_ib with ib_device_set_netdev() when attaching/detaching a net device and ib_device_get_netdev() when retrieving the net device. Export ib_device_get_netdev(). For mlx5 representors/PFs/VFs and lag creation we replace the netdev assignments with the IB set/get netdev functions. In active-backup mode lag the active slave net device is stored in the lag itself. To assure the net device stored in a lag bond IB device is the active slave we implement the following: - mlx5_core: when modifying the slave of a bond we send the internal driver event MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE. - mlx5_ib: when catching the event call ib_device_set_netdev() This patch also ensures the correct IB events are sent in switchdev lag. While at it, when in multiport eswitch mode, only a single IB device is created for all ports. The said IB device will receive all netdev events of its VFs once loaded, thus to avoid overwriting the mapping of PF IB device to PF netdev, ignore NETDEV_REGISTER events if the ib device has already been mapped to a netdev. Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-08-11RDMA: Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' APIYishai Hadas
Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' API instead of udata. This enables passing some new ioctl attributes to the drivers, as will be introduced in the next patches for mlx5 driver. Change the involved drivers accordingly. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/9a25b2fc02443f7c36c2d93499ae25252b6afd40.1722512548.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-08-11RDMA/umem: Introduce an option to revoke DMABUF umemYishai Hadas
Introduce an option to revoke DMABUF umem. This option will retain the umem allocation while revoking its DMA mapping. Furthermore, any subsequent attempts to map the pages should fail once the umem has been revoked. This functionality will be utilized in the upcoming patches in the series, where we aim to delay umem deallocation until the mkey deregistration. However, we must unmap its pages immediately. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/a38270f2fe4a194868ca2312f4c1c760e51bcbff.1722512548.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-08-11RDMA/umem: Add support for creating pinned DMABUF umem with a given dma deviceYishai Hadas
Add support for creating pinned DMABUF umem with a specified DMA device instead of the DMA device of the given IB device. This API will be utilized in the upcoming patches of the series when multiple path DMAs are implemented. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/038aad36a43797e5591b20ba81051fc5758124f9.1722512548.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-07-04RDMA/core: Introduce "name_assign_type" for an IB deviceMark Zhang
The name_assign_type indicates how the name is provided. Currently these types are supported: - RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set; - RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The user-created sub device, rxe and siw device has this type. When filling nl device info, it is set in the new attribute RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev "rdma_rename" could check this attribute to determine if this device needs to be renamed or not. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-07-01RDMA: Set type of rdma_ah to IB for a SMI sub deviceMark Zhang
An address handle created on a SMI port has type IB, as a SMI port it's used for SMI management through umad. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/195be77aae0cce93522269f22f1303d2ccbef605.1718553901.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2024-07-01RDMA/core: Support IB sub device with type "SMI"Mark Zhang
This patch adds 2 APIs, as well as driver operations to support adding and deleting an IB sub device, which provides part of functionalities of it's parent. A sub device has a type; for a sub device with type "SMI", it provides the smi capability through umad for its parent, meaning uverb is not supported. A sub device cannot live without a parent. So when a parent is released, all it's sub devices are released as well. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/44253f7508b21eb2caefea3980c2bc072869116c.1718553901.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2024-06-27RDMA: Pass entire uverbs attr bundle to create cq functionAkiva Goldberger
Changes the create_cq verb signature by sending the entire uverbs attr bundle as a parameter. This allows drivers to send driver specific attrs through ioctl for the create_cq verb and access them in their driver specific code. Also adds a new enum value for driver specific ioctl attributes for methods already supporting UHW. Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-06-26IB/core: add support for draining Shared receive queuesMax Gurtovoy
To avoid leakage for QPs assocoated with SRQ, according to IB spec (section 10.3.1): "Note, for QPs that are associated with an SRQ, the Consumer should take the QP through the Error State before invoking a Destroy QP or a Modify QP to the Reset State. The Consumer may invoke the Destroy QP without first performing a Modify QP to the Error State and waiting for the Affiliated Asynchronous Last WQE Reached Event. However, if the Consumer does not wait for the Affiliated Asynchronous Last WQE Reached Event, then WQE and Data Segment leakage may occur. Therefore, it is good programming practice to teardown a QP that is associated with an SRQ by using the following process: - Put the QP in the Error State; - wait for the Affiliated Asynchronous Last WQE Reached Event; - either: - drain the CQ by invoking the Poll CQ verb and either wait for CQ to be empty or the number of Poll CQ operations has exceeded CQ capacity size; or - post another WR that completes on the same CQ and wait for this WR to return as a WC; - and then invoke a Destroy QP or Reset QP." Catch the Last WQE Reached Event in the core layer during drain QP flow. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20240619171153.34631-2-mgurtovoy@nvidia.com Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-04-30RDMA/core: Add an option to display driver-specific QPs in the rdmatoolChiara Meiohas
Utilize the -dd flag (driver-specific details) in the rdmatool to view driver-specific QPs which are not exposed yet. Add the netlink attribute to mark request to convey driver details and use it to return QP subtype as a string. $ rdma resource show qp link ibp8s0f1 link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core] link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core] $ rdma resource show qp link ibp8s0f1 -dd link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 465 type DRIVER subtype REG_UMR state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core] link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core] $ rdma resource show 0: ibp8s0f0: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2 1: ibp8s0f1: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2 $ rdma resource show -dd 0: ibp8s0f0: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2 1: ibp8s0f1: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2 Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Link: https://lore.kernel.org/r/2607bb3ddec3cae3443c2ea19e9f700825d20a98.1713268997.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-04-25fix missing vmalloc.h includesKent Overstreet
Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-03RDMA/uverbs: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. There are currently a couple of objects (`alloc_head` and `bundle`) in `struct bundle_priv` that contain a couple of flexible structures: struct bundle_priv { /* Must be first */ struct bundle_alloc_head alloc_head; ... /* * Must be last. bundle ends in a flex array which overlaps * internal_buffer. */ struct uverbs_attr_bundle bundle; u64 internal_buffer[32]; }; So, in order to avoid ending up with a couple of flexible-array members in the middle of a struct, we use the `struct_group_tagged()` helper to separate the flexible array from the rest of the members in the flexible structures: struct uverbs_attr_bundle { struct_group_tagged(uverbs_attr_bundle_hdr, hdr, ... the rest of the members ); struct uverbs_attr attrs[]; }; With the change described above, we now declare objects of the type of the tagged struct without embedding flexible arrays in the middle of another struct: struct bundle_priv { /* Must be first */ struct bundle_alloc_head_hdr alloc_head; ... struct uverbs_attr_bundle_hdr bundle; u64 internal_buffer[32]; }; We also use `container_of()` whenever we need to retrieve a pointer to the flexible structures. Notice that the `bundle_size` computed in `uapi_compute_bundle_size()` remains the same. So, with these changes, fix the following warnings: drivers/infiniband/core/uverbs_ioctl.c:45:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] 45 | struct bundle_alloc_head alloc_head; | ^~~~~~~~~~ drivers/infiniband/core/uverbs_ioctl.c:67:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] 67 | struct uverbs_attr_bundle bundle; | ^~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZeIgeZ5Sb0IZTOyt@neat Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-02-21RDMA/uverbs: Remove flexible arrays from struct *_filterErick Archer
When a struct containing a flexible array is included in another struct, and there is a member after the struct-with-flex-array, there is a possibility of memory overlap. These cases must be audited [1]. See: struct inner { ... int flex[]; }; struct outer { ... struct inner header; int overlap; ... }; This is the scenario for all the "struct *_filter" structures that are included in the following "struct ib_flow_spec_*" structures: struct ib_flow_spec_eth struct ib_flow_spec_ib struct ib_flow_spec_ipv4 struct ib_flow_spec_ipv6 struct ib_flow_spec_tcp_udp struct ib_flow_spec_tunnel struct ib_flow_spec_esp struct ib_flow_spec_gre struct ib_flow_spec_mpls The pattern is like the one shown below: struct *_filter { ... u8 real_sz[]; }; struct ib_flow_spec_* { ... struct *_filter val; struct *_filter mask; }; In this case, the trailing flexible array "real_sz" is never allocated and is only used to calculate the size of the structures. Here the use of the "offsetof" helper can be changed by the "sizeof" operator because the goal is to get the size of these structures. Therefore, the trailing flexible arrays can also be removed. However, due to the trailing padding that can be induced in structs it is possible that the: offsetof(struct *_filter, real_sz) != sizeof(struct *_filter) This situation happens with the "struct ib_flow_ipv6_filter" and to avoid it the "__packed" macro is used in this structure. But now, the "sizeof(struct ib_flow_ipv6_filter)" has changed. This is not a problem since this size is not used in the code. The situation now is that "sizeof(struct ib_flow_spec_ipv6)" has also changed (this struct contains the struct ib_flow_ipv6_filter). This is also not a problem since it is only used to set the size of the "union ib_flow_spec", which can store all the "ib_flow_spec_*" structures. Link: https://lore.kernel.org/r/20240217142913.4285-1-erick.archer@gmx.com Signed-off-by: Erick Archer <erick.archer@gmx.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-12-04RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgszMike Marciniszyn
64k pages introduce the situation in this diagram when the HCA 4k page size is being used: +-------------------------------------------+ <--- 64k aligned VA | | | HCA 4k page | | | +-------------------------------------------+ | o | | | | o | | | | o | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ <--- Live HCA page |OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset | | <--- VA | MR data | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ | o | | | | o | | | | o | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ The VA addresses are coming from rdma-core in this diagram can be arbitrary, but for 64k pages, the VA may be offset by some number of HCA 4k pages and followed by some number of HCA 4k pages. The current iterator doesn't account for either the preceding 4k pages or the following 4k pages. Fix the issue by extending the ib_block_iter to contain the number of DMA pages like comment [1] says and by using __sg_advance to start the iterator at the first live HCA page. The changes are contained in a parallel set of iterator start and next functions that are umem aware and specific to umem since there is one user of the rdma_for_each_block() without umem. These two fixes prevents the extra pages before and after the user MR data. Fix the preceding pages by using the __sq_advance field to start at the first 4k page containing MR data. Fix the following pages by saving the number of pgsz blocks in the iterator state and downcounting on each next. This fix allows for the elimination of the small page crutch noted in the Fixes. Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()") Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-04RDMA/core: Fix a couple of obvious typos in commentsChuck Lever
Fix typos. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169643338101.8035.6826446669479247727.stgit@manet.1015granger.net Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-10-02RDMA: Annotate struct rdma_hw_stats with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct rdma_hw_stats. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230929180431.3005464-1-keescook@chromium.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-26IB/mlx5: Expose XDR speed through MADOr Har-Toov
Under MAD query port, Report NDR speed when NDR is supported in the port capability mask. Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/d30bdec2a66a8a2edd1d84ee61453c58cf346b43.1695204156.git.leon@kernel.org Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-26IB/core: Add support for XDR link speedOr Har-Toov
Add new IBTA speed XDR, the new rate that was added to Infiniband spec as part of XDR and supporting signaling rate of 200Gb. In order to report that value to rdma-core, add new u32 field to query_port response. Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/9d235fc600a999e8274010f0e18b40fa60540e6c.1695204156.git.leon@kernel.org Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-20RDMA/core: Add support to dump SRQ resource in RAW formatwenglianfa
Add support to dump SRQ resource in raw format. It enable drivers to return the entire device specific SRQ context without setting each field separately. Example: $ rdma res show srq -r dev hns3 149000... $ rdma res show srq -j -r [{"ifindex":0,"ifname":"hns3","data":[149,0,0,...]}] Signed-off-by: wenglianfa <wenglianfa@huawei.com> Link: https://lore.kernel.org/r/20230918131110.3987498-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-20RDMA/core: Add dedicated SRQ resource tracker functionwenglianfa
Add a dedicated callback function for SRQ resource tracker. Signed-off-by: wenglianfa <wenglianfa@huawei.com> Link: https://lore.kernel.org/r/20230918131110.3987498-2-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-13RDMA Remove unused function declarationsYue Haibing
Commit c2261dd76b54 ("RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev") declared but never implemented ib_device_netdev(), remove it. Commit 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") declared but never implemented iw_cm_unbind_qp() and iw_cm_get_qp(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230809142718.42316-1-yuehaibing@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-03rdma: fix INFINIBAND_USER_ACCESS dependencyArnd Bergmann
After a change to the bnxt_re driver, it fails to link when CONFIG_INFINIBAND_USER_ACCESS is disabled: aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE': ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file' aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class' aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler' The problem is that the 'bnxt_re_uapi_defs' structure is built unconditionally and references a couple of functions that are never really called in this configuration but instead require other functions that are left out. Adding an #ifdef around the new code, or a Kconfig dependency would address this problem, but adding the compile-time check inside of the UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also addresses the problem in other drivers that may run into the same dependency. Fixes: 360da60d6c6ed ("RDMA/bnxt_re: Enable low latency push") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-11RDMA/cma: Always set static rate to 0 for RoCEMark Zhang
Set static rate to 0 as it should be discovered by path query and has no meaning for RoCE. This also avoid of using the rtnl lock and ethtool API, which is a bottleneck when try to setup many rdma-cm connections at the same time, especially with multiple processes. Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-04-16RDMA: Add ib_virt_dma_to_page()Jason Gunthorpe
Make it clearer what is going on by adding a function to go back from the "virtual" dma_addr to a kva and another to a struct page. This is used in the ib_uses_virt_dma() style drivers (siw, rxe, hfi, qib). Call them instead of a naked casting and virt_to_page() when working with dma_addr values encoded by the various ib_map functions. This also fixes the virt_to_page() casting problem Linus Walleij has been chasing. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v2-05ea785520ed+10-ib_virt_page_jgg@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-02-12RDMA/umem: Remove unused 'work' member from struct ib_umemJason Gunthorpe
It is not used now. Fixes: b95df5e3e459 ("drivers/IB,core: reduce scope of mmap_sem") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-22a2667fa089+a3-umem_work_jgg@nvidia.com Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-02-07RDMA/restrack: Correct spellingDeming Wang
Fix spelling errors. Signed-off-by: Deming Wang <wangdeming@inspur.com> Link: https://lore.kernel.org/r/20230206085725.1507-1-wangdeming@inspur.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-15RDMA/mlx: Calling qp event handler in workqueue contextMark Zhang
Move the call of qp event handler from atomic to workqueue context, so that the handler is able to block. This is needed by following patches. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://lore.kernel.org/r/0cd17b8331e445f03942f4bb28d447f24ac5669d.1672821186.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10RDMA/cma: Refactor the inbound/outbound path records process flowMark Zhang
Refactors based on comments [1] of the multiple path records support patchset: - Return failure if not able to set inbound/outbound PRs; - Simplify the flow when receiving the PRs from netlink channel: When a good PR response is received, unpack it and call the path_query callback directly. This saves two memory allocations; - Define RDMA_PRIMARY_PATH_MAX_REC_NUM in a proper place. [1] https://lore.kernel.org/linux-rdma/Yyxp9E9pJtUids2o@nvidia.com/ Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> #srp Link: https://lore.kernel.org/r/7610025d57342b8b6da0f19516c9612f9c3fdc37.1672819376.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-12-09RDMA: Extend RDMA kernel verbs ABI to support flushLi Zhijian
This commit extends the RDMA kernel verbs ABI to support the flush operation defined in IBA A19.4.1. These changes are backward compatible with the existing RDMA kernel verbs ABI. It makes device/HCA support new FLUSH attributes/capabilities, and it also makes memory region support new FLUSH access flags. Users can use ibv_reg_mr(3) to register flush access flags. Only the access flags also supported by device's capabilities can be registered successfully. Once registered successfully, it means the MR is flushable. Similarly, A flushable MR should also have one or both of GLOBAL_VISIBILITY and PERSISTENT attributes/capabilities like device/HCA. Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-01RDMA: Extend RDMA kernel ABI to support atomic writeXiao Yang
1) Define new atomic write request/completion in kernel. 2) Define new atomic write capability in kernel. 3) Define new atomic write opcode for RC service in packet. Link: https://lore.kernel.org/r/1669905432-14-3-git-send-email-yangx.jy@fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-11-28RDMA: Add netdevice_tracker to ib_device_set_netdev()Jason Gunthorpe
This will cause an informative backtrace to print if the user of ib_device_set_netdev() isn't careful about tearing down the ibdevice before its the netdevice parent is destroyed. Such as like this: unregister_netdevice: waiting for vlan0 to become free. Usage count = 2 leaked reference. ib_device_set_netdev+0x266/0x730 siw_newlink+0x4e0/0xfd0 nldev_newlink+0x35c/0x5c0 rdma_nl_rcv_msg+0x36d/0x690 rdma_nl_rcv+0x2ee/0x430 netlink_unicast+0x543/0x7f0 netlink_sendmsg+0x918/0xe20 sock_sendmsg+0xcf/0x120 ____sys_sendmsg+0x70d/0x8b0 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd This will help debug the issues syzkaller is seeing. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-a7c81b3842ce+e5-netdev_tracker_jgg@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-10-19RDMA/opa_vnic: fix spelling typo in commentJiangshan Yi
Fix spelling typo in comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Link: https://lore.kernel.org/r/20221009081047.2643471-1-13667453960@163.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-10-19RDMA/core: return -EOPNOSUPP for ODP unsupported deviceLi Zhijian
ib_reg_mr(3) which is used to register a MR with specific access flags for specific HCA will set errno when something go wrong. So, here we should return the specific -EOPNOTSUPP when the being requested ODP access flag is unsupported by the HCA(such as RXE). Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Link: https://lore.kernel.org/r/20221001020045.8324-1-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-27RDMA/core: Add UVERBS_ATTR_RAW_FDJason Gunthorpe
This uses the same passing protocol as UVERBS_ATTR_FD (eg len = 0 data_s64 = fd), except that the FD is not required to be a uverbs object and the core code does not covert the FD to an object handle automatically. Access to the int fd is provided by uverbs_get_raw_fd(). Link: https://lore.kernel.org/r/2-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-09-22RDMA/cm: Use DLID from inbound/outbound PathRecords as the datapath DLIDMark Zhang
In inter-subnet cases, when inbound/outbound PRs are available, outbound_PR.dlid is used as the requestor's datapath DLID and inbound_PR.dlid is used as the responder's DLID. The inbound_PR.dlid is passed to responder side with the "ConnectReq.Primary_Local_Port_LID" field. With this solution the PERMISSIVE_LID is no longer used in Primary Local LID field. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/b3f6cac685bce9dde37c610be82e2c19d9e51d9e.1662631201.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-22RDMA/cma: Multiple path records support with netlink channelMark Zhang
Support receiving inbound and outbound IB path records (along with GMP PathRecord) from user-space service through the RDMA netlink channel. The LIDs in these 3 PRs can be used in this way: 1. GMP PR: used as the standard local/remote LIDs; 2. DLID of outbound PR: Used as the "dlid" field for outbound traffic; 3. DLID of inbound PR: Used as the "dlid" field for outbound traffic in responder side. This is aimed to support adaptive routing. With current IB routing solution when a packet goes out it's assigned with a fixed DLID per target, meaning a fixed router will be used. The LIDs in inbound/outbound path records can be used to identify group of routers that allow communication with another subnet's entity. With them packets from an inter-subnet connection may travel through any router in the set to reach the target. As confirmed with Jason, when sending a netlink request, kernel uses LS_RESOLVE_PATH_USE_ALL so that the service knows kernel supports multiple PRs. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/2fa2b6c93c4c16c8915bac3cfc4f27be1d60519d.1662631201.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-22RDMA/core: Rename rdma_route.num_paths field to num_pri_alt_pathsMark Zhang
This fields means the total number of primary and alternative paths, i.e.,: 0 - No primary nor alternate path is available; 1 - Only primary path is available; 2 - Both primary and alternate path are available. Rename it to avoid confusion as with follow patches primary path will support multiple path records. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/cbe424de63a56207870d70c5edce7c68e45f429e.1662631201.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-30IB/cm: remove cm_id_priv->id.service_mask and service_mask parameter of ↵Mark Zhang
cm_init_listen() The service_mask is always ~cpu_to_be64(0), so the result is always a NOP when it is &'d with a service_id. Remove it for simplicity. Link: https://lore.kernel.org/r/20220819090859.957943-3-markzhang@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-30IB/cm: Remove the service_mask parameter from ib_cm_listen()Mark Zhang
Remove the service_mask parameter of ib_cm_listen(), as all callers use 0. Link: https://lore.kernel.org/r/20220819090859.957943-2-markzhang@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-21IB: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Link: https://lore.kernel.org/r/20220818210018.6841-1-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-06Merge tag 'dma-mapping-5.20-2022-08-06' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy, Christoph Hellwig) - restructure the PCIe peer to peer mapping support (Logan Gunthorpe) - allow the IOMMU code to communicate an optional DMA mapping length and use that in scsi and libata (John Garry) - split the global swiotlb lock (Tianyu Lan) - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang, Lukas Bulwahn, Robin Murphy) * tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits) swiotlb: fix passing local variable to debugfs_create_ulong() dma-mapping: reformat comment to suppress htmldoc warning PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() RDMA/rw: drop pci_p2pdma_[un]map_sg() RDMA/core: introduce ib_dma_pci_p2p_dma_supported() nvme-pci: convert to using dma_map_sgtable() nvme-pci: check DMA ops when indicating support for PCI P2PDMA iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg iommu: Explicitly skip bus address marked segments in __iommu_map_sg() dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support dma-direct: support PCI P2PDMA pages in dma-direct map_sg dma-mapping: allow EREMOTEIO return code for P2PDMA transfers PCI/P2PDMA: Introduce helpers for dma_map_sg implementations PCI/P2PDMA: Attempt to set map_type if it has not been set lib/scatterlist: add flag for indicating P2PDMA segments in an SGL swiotlb: clean up some coding style and minor issues dma-mapping: update comment after dmabounce removal scsi: sd: Add a comment about limiting max_sectors to shost optimal limit ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit ...
2022-07-26RDMA/core: introduce ib_dma_pci_p2p_dma_supported()Logan Gunthorpe
Introduce the helper function ib_dma_pci_p2p_dma_supported() to check if a given ib_device can be used in P2PDMA transfers. This ensures the ib_device is not using virt_dma and also that the underlying dma_device supports P2PDMA. Use the new helper in nvme-rdma to replace the existing check for ib_uses_virt_dma(). Adding the dma_pci_p2pdma_supported() check allows switching away from pci_p2pdma_[un]map_sg(). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-22RDMA: Fix comment typoXin Gao
The double `get' is duplicated, remove one. Link: https://lore.kernel.org/r/20220722021833.15669-1-gaoxin@cdjrlc.com Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-06-16RDMA/core: Add a netevent notifier to cmaPatrisious Haddad
Add a netevent callback for cma, mainly to catch NETEVENT_NEIGH_UPDATE. Previously, when a system with failover MAC mechanism change its MAC address during a CM connection attempt, the RDMA-CM would take a lot of time till it disconnects and timesout due to the incorrect MAC address. Now when we get a NETEVENT_NEIGH_UPDATE we check if it is due to a failover MAC change and if so, we instantly destroy the CM and notify the user in order to spare the unnecessary waiting for the timeout. Link: https://lore.kernel.org/r/bb255c9e301cd50b905663b8e73f7f5133d0e4c5.1654601342.git.leonro@nvidia.com Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-05-24RDMA/core: Fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220521111145.81697-86-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-04-12Merge branch 'mlx5-next' of ↵Jason Gunthorpe
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Leon Romanovsky says: ==================== Mellanox shared branch that includes: * Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code is unmaintained, untested and not in-use by any upstream/distro oriented customers. In order to reduce code complexity, drop the kernel code, clean build config options and delete useless kTLS vs. TLS separation. [1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf * Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com Together with FPGA TLS, the IPsec went to EOL state in the November of 2019 [1]. Exactly like FPGA TLS, no active customers exist for this upstream code and all the complexity around that area can be deleted. [2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf * Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de ==================== * 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Remove not-implemented IPsec capabilities net/mlx5: Remove ipsec_ops function table net/mlx5: Reduce kconfig complexity while building crypto support net/mlx5: Move IPsec file to relevant directory net/mlx5: Remove not-needed IPsec config net/mlx5: Align flow steering allocation namespace to common style net/mlx5: Unify device IPsec capabilities check net/mlx5: Remove useless IPsec device checks net/mlx5: Remove ipsec vs. ipsec offload file separation RDMA/core: Delete IPsec flow action logic from the core RDMA/mlx5: Drop crypto flow steering API RDMA/mlx5: Delete never supported IPsec flow action net/mlx5: Remove FPGA ipsec specific statistics net/mlx5: Remove XFRM no_trailer flag net/mlx5: Remove not-used IDA field from IPsec struct net/mlx5: Delete metadata handling logic net/mlx5_fpga: Drop INNOVA IPsec support IB/mlx5: Fix undefined behavior due to shift overflowing the constant net/mlx5: Cleanup kTLS function names and their exposure net/mlx5: Remove tls vs. ktls separation as it is the same net/mlx5: Remove indirection in TLS build net/mlx5: Reliably return TLS device capabilities net/mlx5_fpga: Drop INNOVA TLS support Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
2022-04-09RDMA/core: Delete IPsec flow action logic from the coreLeon Romanovsky
The removal of mlx5 flow steering logic, left the kernel without any RDMA drivers that implements flow action callbacks supplied by RDMA/core. Any user access to them caused to EOPNOTSUPP error, which can be achieved by simply removing ioctl implementation. Link: https://lore.kernel.org/r/a638e376314a2eb1c66f597c0bbeeab2e5de7faf.1649232994.git.leonro@nvidia.com Reviewed-by: Raed Salem <raeds@nvidia.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 04:26:26 +0000