summaryrefslogtreecommitdiff
path: root/include/linux/phy/phy.h
AgeCommit message (Collapse)Author
2024-03-21Merge tag 'usb-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...
2024-02-23phy: constify of_phandle_args in xlateKrzysztof Kozlowski
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-27phy: core: add notify_connect and notify_disconnect callbackStanley Chang
In Realtek SoC, the parameter of usb phy is designed to be able to do dynamic tuning based in the port status. Therefore, add a notify callback of phy driver when usb connection/disconnection change. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20231213031203.4911-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-19phy: core: add debugfs filesChunfeng Yun
Add a debugfs root for phy class, and create a debugfs directory under the root when create phy, then phy drivers can add debugfs files. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230513092218.21139-1-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03phy: Add devm_of_phy_optional_get() helperGeert Uytterhoeven
Add an optional variant of devm_of_phy_get() that also takes care of printing real errors, so drivers no longer have to open-code this operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/4cd0069bcff424ffc5c3a102397c02370b91985b.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03phy: Remove unused phy_optional_get()Geert Uytterhoeven
There were never any upstream users of this function since its introduction almost 10 years ago. Besides, the dummy for phy_optional_get() should have returned NULL instead of an error code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/df61992b1d66bccf4e6e1eafae94a7f7d7629f34.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: Add LVDS configuration optionsLiu Ying
This patch allows LVDS PHYs to be configured through the generic functions and through a custom structure added to the generic union. The parameters added here are based on common LVDS PHY implementation practices. The set of parameters should cover all potential users. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220419010852.452169-3-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: core: Reword the comment specifying the units of max_link_rate to be MbpsAswath Govindraju
In some subsystems (eg. CAN, SPI), the max link rate supported can be less than 1 Mbps and if the unit for max_link_rate is Mbps then it can't be used. Therefore, leave the decision of units to be used, to the producer and consumer. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210510051006.11393-2-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-17phy: Add media type and speed serdes configuration interfacesSteen Hegelund
Provide new phy configuration interfaces for media type and speed that allows e.g. PHYs used for ethernet to be configured with this information. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210218161451.3489955-3-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: Add new PHY attribute max_link_rateSwapnil Jakhade
Add new PHY attribute max_link_rate to struct phy_attrs. This indicates maximum link rate supported by PHY (in Mbps). Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1599805114-22063-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14phy: Add DisplayPort configuration optionsYuti Amonkar
Allow DisplayPort PHYs to be configured through the generic functions through a custom structure added to the generic union. The configuration structure is used for reconfiguration of DisplayPort PHYs during link training operation. The parameters added here are the ones defined in the DisplayPort spec v1.4 which include link rate, number of lanes, voltage swing and pre-emphasis. Add the DisplayPort phy mode to the generic phy_mode enum. Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: core: Add consumer device link supportAlexandre Torgue
In order to enforce suspend/resume ordering, this commit creates link between phy consumers and phy devices. This link avoids to suspend phy before phy consumers. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> [jonathanh@nvidia.com: Fix an abort when of_phy_get() returns error] Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-31phy: add PHY_MODE_LVDSHeiko Stuebner
There are combo phys out there that can be switched between doing dsi and lvds. So add a mode definition for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHYKishon Vijay Abraham I
Add a new phy_ops *release* invoked when the consumer relinquishes the PHY using phy_put/devm_phy_put. The initializations done by the PHY driver in of_xlate call back can be can be cleaned up here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-12phy: fix build breakage: add PHY_MODE_SATAJohn Hubbard
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Olof Johansson <olof@lixom.net> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2018-12-27include/linux/phy/phy.h: fix minor kerneldoc errorsRobert P. J. Day
Correct two minor kerneldoc errors: 1) missing reference to @mode in struct phy_ops 2) obsolete reference to @init_data in struct_phy_attrs, removed in dbc98635e0d42f0e62ea92813df1e0e4c90f8375 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12phy: Add MIPI D-PHY configuration optionsMaxime Ripard
Now that we have some infrastructure for it, allow the MIPI D-PHY phy's to be configured through the generic functions through a custom structure added to the generic union. The parameters added here are the ones defined in the MIPI D-PHY spec, plus the number of lanes in use. The current set of parameters should cover all the potential users. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add configuration interfaceMaxime Ripard
The phy framework is only allowing to configure the power state of the PHY using the init and power_on hooks, and their power_off and exit counterparts. While it works for most, simple, PHYs supported so far, some more advanced PHYs need some configuration depending on runtime parameters. These PHYs have been supported by a number of means already, often by using ad-hoc drivers in their consumer drivers. That doesn't work too well however, when a consumer device needs to deal with multiple PHYs, or when multiple consumers need to deal with the same PHY (a DSI driver and a CSI driver for example). So we'll add a new interface, through two funtions, phy_validate and phy_configure. The first one will allow to check that a current configuration, for a given mode, is applicable. It will also allow the PHY driver to tune the settings given as parameters as it sees fit. phy_configure will actually apply that configuration in the phy itself. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add MIPI D-PHY modeMaxime Ripard
MIPI D-PHY is a MIPI standard meant mostly for display and cameras in embedded systems. Add a mode for it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: clean up unused ethernet specific phy modesGrygorii Strashko
After recent changes PHY_MODE_SGMII, PHY_MODE_2500SGMII, PHY_MODE_QSGMII, PHY_MODE_10GKR are not used any more and can be removed. Hence - remove them. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: add PHY_MODE_ETHERNETGrygorii Strashko
Add new PHY's mode to be used by Ethernet PHY interface drivers or multipurpose PHYs like serdes. It will be reused in further changes. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: rework phy_set_mode to accept phy mode and submodeGrygorii Strashko
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-10-05phy: add QSGMII and PCIE modesQuentin Schulz
Prepare for upcoming phys that'll handle QSGMII or PCIe. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17phy: add 2.5G SGMII mode to the phy_mode enumAntoine Tenart
This patch adds one more generic PHY mode to the phy_mode enum, to allow configuring generic PHYs to the 2.5G SGMII mode by using the set_mode callback. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08phy: fix structure documentationDov Levenglick
Add missing documentation of structure members and modify the order of documentation to match that of the structure declaration. Signed-off-by: Dov Levenglick <dov.levenglick@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-08phy: Add USB speed related PHY modesManu Gautam
Add following USB speed related PHY modes: LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed) Speed related information is required by some QCOM PHY drivers to program PHY monitor resume/remote-wakeup events in suspended state. Speed is needed in order to set correct polarity of wakeup events for detection. E.g. QUSB2 PHY monitors DP/DM line state depending on whether speed is LS or FS/HS to detect resume. Similarly QMP USB3 PHY in SS mode should monitor RX terminations attach/detach and LFPS events depending on SSPHY is active or not. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23drivers: phy: add calibrate methodAndrzej Pietrasiewicz
Some quirky UDCs (like dwc3 on Exynos) need to have their phys calibrated e.g. for using super speed. This patch adds a new phy_calibrate() method. When the calibration should be used is dependent on actual chip. In case of dwc3 on Exynos the calibration must happen after usb_add_hcd() (while in host mode), because certain phy parameters like Tx LOS levels and boost levels need to be calibrated further post initialization of xHCI controller, to get SuperSpeed operations working. But an hcd must be prepared first in order to pass it to usb_add_hcd(), so, in particular, dwc3 registers must be available first, and in order for the latter to happen the phys must be initialized. This poses a chicken and egg problem if the calibration were to be performed in phy_init(). To break the circular dependency a separate method is added which can be called at a desired moment after phy intialization. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: Add UFS PHY modesVivek Gautam
UFS phy has two modes for each High speed generation. These modes are identified by two rates of operations - Rate A, and Rate B. Add these UFS phy modes to phy framework. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: Return NULL if the phy is optionalMaxime Ripard
If we're trying to get a handle to an optional phy, then the phy framework being disabled shouldn't return an hard error. Instead, return NULL just like phy_optional_get does when there's no phy provided in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-30phy: add sgmii and 10gkr modes to the phy_mode enumAntoine Tenart
This patch adds more generic PHY modes to the phy_mode enum, to allow configuring generic PHYs to the SGMII and/or the 10GKR mode by using the set_mode callback. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-05phy: Add reset callback for not generic phyRandy Li
Add a dummy function for phy_reset in case the CONFIG_GENERIC_PHY is disabled. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10phy: Add reset callbackRandy Li
The only use for this is for solving a hardware design problem in usb of Rockchip RK3288. Signed-off-by: Randy Li <ayaka@soulik.info> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: Add set_mode callbackDavid Lechner
The initial use for this is for PHYs that have a mode related to USB OTG. There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting in the USB PHY to override OTG VBUS and ID signals. Of course, the enum can be expaned in the future to include modes for other types of PHYs as well. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David Lechner <david@lechnology.com>
2016-04-29phy: core: Allow children node to be overriddenThierry Reding
In order to more flexibly support device tree bindings, allow drivers to override the container of the child nodes. By default the device node of the PHY provider is assumed to be the parent for children, but bindings may decide to add additional levels for better organization. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-11phy: core: Add devm_of_phy_get_by_index to phy-coreArun Ramamurthy
Some generic drivers, such as ehci, may use multiple phys and for such drivers referencing phy(s) by name(s) does not make sense. Instead of inventing new naming schemes and using custom code to iterate through them, such drivers are better of using nameless phy bindings and using this newly introduced API to iterate through them. Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> [kishon@ti.com: fix compilation errors] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-22phy: remove the old lookup methodHeikki Krogerus
The users of the old method are now converted to the new one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [ kishon@ti.com : made phy-berlin-usb.c and phy-miphy28lp.c to use the updated devm_phy_create API.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21phy: improved lookup methodHeikki Krogerus
Separates registration of the phy and the lookup. The method is copied from clkdev.c, Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21phy: safer to_phy() macroHeikki Krogerus
This makes to_phy() macro work with other variable names besides "dev". Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Let node ptr of PHY point to PHY and not of PHY providerKishon Vijay Abraham I
In case of multi-phy PHY providers, each PHY should be modeled as a sub node of the PHY provider. Then each PHY will have a different node pointer (node pointer of sub node) than that of PHY provider. Added this provision in the PHY core. Also fixed all drivers to use the updated API. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-07-22phy: core: Support regulator supply for PHY powerRoger Quadros
Some PHYs can be powered by an external power regulator. e.g. USB_HS PHY on DRA7 SoC. Make the PHY core support a power regulator. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-04-24phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHYGrygorii Strashko
This fixes a regression on Keystone 2 platforms caused by patch 57303488cd37da58263e842de134dc65f7c626d5 "usb: dwc3: adapt dwc3 core to use Generic PHY Framework" which adds optional support of generic phy in DWC3 core. On Keystone 2 platforms the USB is not working now because CONFIG_GENERIC_PHY isn't set and, as result, Generic PHY APIs stubs return -ENOSYS always. The log shows: dwc3 2690000.dwc3: failed to initialize core dwc3: probe of 2690000.dwc3 failed with error -38 Hence, fix it by making NULL a valid phy reference in Generic PHY APIs stubs in the same way as it was done by the patch 04c2facad8fee66c981a51852806d8923336f362 "drivers: phy: Make NULL a valid phy reference". Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08phy: core: Add devm_of_phy_get to phy-coreKamil Debski
Adding devm_of_phy_get will allow to get phys by supplying a pointer to the struct device_node instead of struct device. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-08phy: core: Add an exported of_phy_get functionKamil Debski
Previously the of_phy_get function took a struct device * and was declared static. It was impossible to call it from another driver and thus it was impossible to get phy defined for a given node. The old function was renamed to _of_phy_get and was left for internal use. of_phy_get function was added and it was exported. The function enables to get a phy for a given device tree node. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-02-05drivers: phy: Add support for optional physAndrew Lunn
Add devm_phy_optional_get and phy_optional_get, which should be used when the phy is optional. They does not return an error when the phy does not exist, rather they returns NULL, which is considered as a valid phy, but results in NOPs when used with the consumer API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-23phy: add phy_get_bus_width()/phy_set_bus_width() callsMatt Porter
This adds a pair of APIs that allows the generic PHY subsystem to provide information on the PHY bus width. The PHY provider driver may use phy_set_bus_width() to set the bus width that the PHY supports. The controller driver may then use phy_get_bus_width() to fetch the PHY bus width in order to properly configure the controller. Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-27drivers: phy: add generic PHY frameworkKishon Vijay Abraham I
The PHY framework provides a set of APIs for the PHY drivers to create/destroy a PHY and APIs for the PHY users to obtain a reference to the PHY with or without using phandle. For dt-boot, the PHY drivers should also register *PHY provider* with the framework. PHY drivers should create the PHY by passing id and ops like init, exit, power_on and power_off. This framework is also pm runtime enabled. The documentation for the generic PHY framework is added in Documentation/phy.txt and the documentation for dt binding can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Cc: Tomasz Figa <t.figa@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-04 00:49:45 +0000