| Age | Commit message (Collapse) | Author |
|---|
|
The LOCALIO auxiliary RPC protocol consists of a single "UUID_IS_LOCAL"
RPC method that allows the Linux NFS client to verify the local Linux
NFS server can see the nonce (single-use UUID) the client generated and
made available in nfs_common. The server expects this protocol to use
the same transport as NFS and NFSACL for its RPCs. This protocol
isn't part of an IETF standard, nor does it need to be considering it
is Linux-to-Linux auxiliary RPC protocol that amounts to an
implementation detail.
The UUID_IS_LOCAL method encodes the client generated uuid_t in terms of
the fixed UUID_SIZE (16 bytes). The fixed size opaque encode and decode
XDR methods are used instead of the less efficient variable sized
methods.
The RPC program number for the NFS_LOCALIO_PROGRAM is 400122 (as assigned
by IANA, see https://www.iana.org/assignments/rpc-program-numbers/ ):
Linux Kernel Organization 400122 nfslocalio
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
[neilb: factored out and simplified single localio protocol]
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
A service created with svc_create_pooled() can be given a linked list of
programs and all of these will be served.
Using a linked list makes it cumbersome when there are several programs
that can be optionally selected with CONFIG settings.
After this patch is applied, API consumers must use only
svc_create_pooled() when creating an RPC service that listens for more
than one RPC program.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If an NFS operation expects a particular sort of object (file, dir, link,
etc) but gets a file handle for a different sort of object, it must
return an error. The actual error varies among NFS versions in non-trivial
ways.
For v2 and v3 there are ISDIR and NOTDIR errors and, for NFSv4 only,
INVAL is suitable.
For v4.0 there is also NFS4ERR_SYMLINK which should be used if a SYMLINK
was found when not expected. This take precedence over NOTDIR.
For v4.1+ there is also NFS4ERR_WRONG_TYPE which should be used in
preference to EINVAL when none of the specific error codes apply.
When nfsd_mode_check() finds a symlink where it expected a directory it
needs to return an error code that can be converted to NOTDIR for v2 or
v3 but will be SYMLINK for v4. It must be different from the error
code returns when it finds a symlink but expects a regular file - that
must be converted to EINVAL or SYMLINK.
So we introduce an internal error code nfserr_symlink_not_dir which each
version converts as appropriate.
nfsd_check_obj_isreg() is similar to nfsd_mode_check() except that it is
only used by NFSv4 and only for OPEN. NFSERR_INVAL is never a suitable
error if the object is the wrong time. For v4.0 we use nfserr_symlink
for non-dirs even if not a symlink. For v4.1 we have nfserr_wrong_type.
We handle this difference in-place in nfsd_check_obj_isreg() as there is
nothing to be gained by delaying the choice to nfsd4_map_status().
As a result of these changes, nfsd_mode_check() doesn't need an rqstp
arg any more.
Note that NFSv4 operations are actually performed in the xdr code(!!!)
so to the only place that we can map the status code successfully is in
nfsd4_encode_operation().
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than using ad hoc values for internal errors (30000, 11000, ...)
use 'enum' to sequentially allocate numbers starting from the first
known available number - now visible as NFS4ERR_FIRST_FREE.
The goal is values that are distinct from all be32 error codes. To get
those we must first select integers that are not already used, then
convert them with cpu_to_be32().
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_breaker_owns_lease() currently open-codes the same test that
nfsd_v4client() performs.
With this patch we use nfsd_v4client() instead.
Also as i_am_nfsd() is only used in combination with kthread_data(),
replace it with nfsd_current_rqst() which combines the two and returns a
valid svc_rqst, or NULL.
The test for NULL is moved into nfsd_v4client() for code clarity.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Instead of using kmalloc to allocate an array for storing active version
info, just declare an array to the max size - it is only 5 or so.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_pool_stats_open() is used in nfsctl.c, so move it there.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the refcounting is fixed, rework nfsd_svc to use the same
thread setup as the pool_threads interface. Have it take an array of
thread counts instead of just a single value, and pass that from the
netlink threads set interface. Since the new netlink interface doesn't
have the same restriction as pool_threads, move the guard against
shutting down all threads to write_pool_threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSERR_OPNOTSUPP is not described by any RFC, and should not be used.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently admins set this by using unshare to create a new uts
namespace, and then resetting the hostname. With the new netlink
interface we can just pass this in directly. Prepare nfsd_svc for
this change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the GETATTR request on a file that has write delegation in effect
and the request attributes include the change info and size attribute
then the request is handled as below:
Server sends CB_GETATTR to client to get the latest change info and file
size. If these values are the same as the server's cached values then
the GETATTR proceeds as normal.
If either the change info or file size is different from the server's
cached values, or the file was already marked as modified, then:
. update time_modify and time_metadata into file's metadata
with current time
. encode GETATTR as normal except the file size is encoded with
the value returned from CB_GETATTR
. mark the file as modified
If the CB_GETATTR fails for any reasons, the delegation is recalled
and NFS4ERR_DELAY is returned for the GETATTR.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFSv4 protocol allows state to be revoked by the admin and has error
codes which allow this to be communicated to the client.
This patch
- introduces a new state-id status SC_STATUS_ADMIN_REVOKED
which can be set on open, lock, or delegation state.
- reports NFS4ERR_ADMIN_REVOKED when these are accessed
- introduces a per-client counter of these states and returns
SEQ4_STATUS_ADMIN_STATE_REVOKED when the counter is not zero.
Decrements this when freeing any admin-revoked state.
- introduces stub code to find all interesting states for a given
superblock so they can be revoked via the 'unlock_filesystem'
file in /proc/fs/nfsd/
No actual states are handled yet.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is the last global stat, take it out of the nfsd_stats struct and
make it a global part of nfsd, report it the same as always.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As this function now destroys the svc_serv, this is a better name.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If write_ports_addfd or write_ports_addxprt fail, they call nfsd_put()
without calling nfsd_last_thread(). This leaves nn->nfsd_serv pointing
to a structure that has been freed.
So remove 'static' from nfsd_last_thread() and call it when the
nfsd_serv is about to be destroyed.
Fixes: ec52361df99b ("SUNRPC: stop using ->sv_nrthreads as a refcount")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce rpc_status netlink support for NFSD in order to dump pending
RPC requests debugging information from userspace.
Closes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=366
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the last nfsd thread is stopped by an explicit act of calling
svc_set_num_threads() with a count of zero, we only have a limited
number of places that can happen, and don't need to call
nfsd_last_thread() in nfsd_put()
So separate that out and call it at the two places where the number of
threads is set to zero.
Move the clearing of ->nfsd_serv and the call to svc_xprt_destroy_all()
into nfsd_last_thread(), as they are really part of the same action.
nfsd_put() is now a thin wrapper around svc_put(), so make it a static
inline.
nfsd_put() cannot be called after nfsd_last_thread(), so in a couple of
places we have to use svc_put() instead.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, svcauth_gss_accept() pre-reserves response buffer space
for the RPC payload length and GSS sequence number before returning
to the dispatcher, which then adds the header's accept_stat field.
The problem is the accept_stat field is supposed to go before the
length and seq_num fields. So svcauth_gss_release() has to relocate
the accept_stat value (see svcauth_gss_prepare_to_wrap()).
To enable these fields to be added to the response buffer in the
correct (final) order, the pointer to the accept_stat has to be made
available to svcauth_gss_accept() so that it can set it before
reserving space for the length and seq_num fields.
As a first step, move the pointer to the location of the accept_stat
field into struct svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently the nfsd-client shrinker is registered and unregistered at
the time the nfsd module is loaded and unloaded. The problem with this
is the shrinker is being registered before all of the relevant fields
in nfsd_net are initialized when nfsd is started. This can lead to an
oops when memory is low and the shrinker is called while nfsd is not
running.
This patch moves the register/unregister of nfsd-client shrinker from
module load/unload time to nfsd startup/shutdown time.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
rpc.nfsd stopped supporting NFSv2 a year ago. Take the next logical
step toward deprecating it and allow NFSv2 support to be compiled out.
Add a new CONFIG_NFSD_V2 option that can be turned off and rework the
CONFIG_NFSD_V?_ACL option dependencies. Add a description that
discourages enabling it.
Also, change the description of CONFIG_NFSD to state that the always-on
version is now 3 instead of 2.
Finally, add an #ifdef around "case 2:" in __write_versions. When NFSv2
is disabled at compile time, this should make the kernel ignore attempts
to disable it at runtime, but still error out when trying to enable it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add courtesy_client_reaper to react to low memory condition triggered
by the system memory shrinker.
The delayed_work for the courtesy_client_reaper is scheduled on
the shrinker's count callback using the laundry_wq.
The shrinker's scan callback is not used for expiring the courtesy
clients due to potential deadlocks.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Subsequent patches will use this mechanism to wake up an operation
that is waiting for a client to return a delegation.
The new tracepoint records whether the wait timed out or was
properly awoken by the expected DELEGRETURN:
nfsd-1155 [002] 83799.493199: nfsd_delegret_wakeup: xid=0x14b7d6ef fh_hash=0xf6826792 (timed out)
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
Currently there is no limit on how many v4 clients are supported
by the system. This can be a problem in systems with small memory
configuration to function properly when a very large number of
clients exist that creates memory shortage conditions.
This patch enforces a limit of 1024 NFSv4 clients, including courtesy
clients, per 1GB of system memory. When the number of the clients
reaches the limit, requests that create new clients are returned
with NFS4ERR_DELAY and the laundromat is kicked start to trim old
clients. Due to the overhead of the upcall to remove the client
record, the maximun number of clients the laundromat removes on
each run is limited to 128. This is done to ensure the laundromat
can still process the other tasks in a timely manner.
Since there is now a limit of the number of clients, the 24-hr
idle time limit of courtesy client is no longer needed and was
removed.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch moves the v4 specific code from nfsd_init_net() to
nfsd4_init_leases_net() helper in nfs4state.c
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSD has advertised support for the NFSv4 time_create attribute
since commit e377a3e698fb ("nfsd: Add support for the birth time
attribute").
Igor Mammedov reports that Mac OS clients attempt to set the NFSv4
birth time attribute via OPEN(CREATE) and SETATTR if the server
indicates that it supports it, but since the above commit was
merged, those attempts now fail.
Table 5 in RFC 8881 lists the time_create attribute as one that can
be both set and retrieved, but the above commit did not add server
support for clients to provide a time_create attribute. IMO that's
a bug in our implementation of the NFSv4 protocol, which this commit
addresses.
Whether NFSD silently ignores the new birth time or actually sets it
is another matter. I haven't found another filesystem service in the
Linux kernel that enables users or clients to modify a file's birth
time attribute.
This commit reflects my (perhaps incorrect) understanding of whether
Linux users can set a file's birth time. NFSD will now recognize a
time_create attribute but it ignores its value. It clears the
time_create bit in the returned attribute bitmask to indicate that
the value was not used.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Fixes: e377a3e698fb ("nfsd: Add support for the birth time attribute")
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch moves create/destroy of laundry_wq from nfs4_state_start
and nfs4_state_shutdown_net to init_nfsd and exit_nfsd to prevent
the laundromat from being freed while a thread is processing a
conflicting lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch provides courteous server support for delegation only.
Only expired client with delegation but no conflict and no open
or lock state is allowed to be in COURTESY state.
Delegation conflict with COURTESY/EXPIRABLE client is resolved by
setting it to EXPIRABLE, queue work for the laundromat and return
delay to the caller. Conflict is resolved when the laudromat runs
and expires the EXIRABLE client while the NFS client retries the
OPEN request. Local thread request that gets conflict is doing the
retry in _break_lease.
Client in COURTESY or EXPIRABLE state is allowed to reconnect and
continues to have access to its state. Access to the nfs4_client by
the reconnecting thread and the laundromat is serialized via the
client_lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
For filesystems that supports "btime" timestamp (i.e. most modern
filesystems do) we share it via kernel nfsd. Btime support for NFS
client has already been added by Trond recently.
Suggested-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Ondrej Valousek <ondrej.valousek.xm@renesas.com>
[ cel: addressed some whitespace/checkpatch nits ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_encode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_decode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR decoder, and can be removed.
Note also that there is a line in each decoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per decoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently the source's export is mounted and unmounted on every
inter-server copy operation. This patch is an enhancement to delay
the unmount of the source export for a certain period of time to
eliminate the mount and unmount overhead on subsequent copy operations.
After a copy operation completes, a work entry is added to the
delayed unmount list with an expiration time. This list is serviced
by the laundromat thread to unmount the export of the expired entries.
Each time the export is being used again, its expiration time is
extended and the entry is re-inserted to the tail of the list.
The unmount task and the mount operation of the copy request are
synced to make sure the export is not unmounted while it's being
used.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
mountd can now monitor clients appearing and disappearing in
/proc/fs/nfsd/clients, and will log these events, in liu of the logging
of mount/unmount events for NFSv3.
Currently it cannot distinguish between unconfirmed clients (which might
be transient and totally uninteresting) and confirmed clients.
So add a "status: " line which reports either "confirmed" or
"unconfirmed", and use fsnotify to report that the info file
has been modified.
This requires a bit of infrastructure to keep the dentry for the "info"
file. There is no need to take a counted reference as the dentry must
remain around until the client is removed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In order to ensure that knfsd threads don't linger once the nfsd
pseudofs is unmounted (e.g. when the container is killed) we let
nfsd_umount() shut down those threads and wait for them to exit.
This also should ensure that we don't need to do a kernel mount of
the pseudofs, since the thread lifetime is now limited by the
lifetime of the filesystem.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Collect some nfsd stats per export in addition to the global stats.
A new nfsdfs export_stats file is created. It uses the same ops as the
exports file to iterate the export entries and we use the file's name to
determine the reported info per export. For example:
$ cat /proc/fs/nfsd/export_stats
# Version 1.1
# Path Client Start-time
# Stats
/test localhost 92
fh_stale: 0
io_read: 9
io_write: 1
Every export entry reports the start time when stats collection
started, so stats collecting scripts can know if stats where reset
between samples.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This reverts commit a85857633b04d57f4524cca0a2bfaf87b2543f9f.
We're still factoring ctime into our change attribute even in the
IS_I_VERSION case. If someone sets the system time backwards, a client
could see the change attribute go backwards. Maybe we can just say
"well, don't do that", but there's some question whether that's good
enough, or whether we need a better guarantee.
Also, the client still isn't actually using the attribute.
While we're still figuring this out, let's just stop returning this
attribute.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Start off the conversion to xdr_stream by de-duplicating the functions
that decode void arguments and encode void results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add defines for server-side extended attribute support. Most have
already been added as part of client support, but these are
the network order error codes for the noxattr and xattr2big errors,
and the addition of the xattr support to the supported file
attributes (if configured).
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We don't drop the reference on the nfsdfs filesystem with
mntput(nn->nfsd_mnt) until nfsd_exit_net(), but that won't be called
until the nfsd module's unloaded, and we can't unload the module as long
as there's a reference on nfsdfs. So this prevents module unloading.
Fixes: 2c830dd7209b ("nfsd: persist nfsd filesystem across mounts")
Reported-and-Tested-by: Luo Xiaogang <lxgrxd@163.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We currently revoke read delegations on any write open or any operation
that modifies file data or metadata (including rename, link, and
unlink). But if the delegation in question is the only read delegation
and is held by the client performing the operation, that's not really
necessary.
It's not always possible to prevent this in the NFSv4.0 case, because
there's not always a way to determine which client an NFSv4.0 delegation
came from. (In theory we could try to guess this from the transport
layer, e.g., by assuming all traffic on a given TCP connection comes
from the same client. But that's not really correct.)
In the NFSv4.1 case the session layer always tells us the client.
This patch should remove such self-conflicts in all cases where we can
reliably determine the client from the compound.
To do that we need to track "who" is performing a given (possibly
lease-breaking) file operation. We're doing that by storing the
information in the svc_rqst and using kthread_data() to map the current
task back to a svc_rqst.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The function was removed a long time ago, but the declaration
and a dummy implementation are still there, referencing the
deprecated time_t type.
Remove both.
Fixes: f958a1320ff7 ("nfsd4: remove unnecessary lease-setting function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Fix __be32 and u32 mismatch in return and assignment.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: dbd4c2dd8f13 ("NFSD add COPY_NOTIFY operation")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
nfs.4 defines nfs42_netaddr structure that represents netloc4.
Populate needed fields from the sockaddr structure.
This will be used by flexfiles and 4.2 inter copy
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
vfs_rmdir and vfs_unlink can return -EBUSY if the
target is a mountpoint. This currently gets passed to
nfserrno() by nfsd_unlink(), and that results in a WARNing,
which is not user-friendly.
Possibly the best NFSv4 error is NFS4ERR_FILE_OPEN, because
there is a sense in which the object is currently in use
by some other task. The Linux NFSv4 client will map this
back to EBUSY, which is an added benefit.
For NFSv3, the best we can do is probably NFS3ERR_ACCES, which isn't
true, but is not less true than the other options.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add a new nfsd/clients/#/info file with some basic information about
each NFSv4 client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I plan to expose some information about nfsv4 clients here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Convert knfsd to use the user namespace of the container that started
the server processes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
