| Age | Commit message (Collapse) | Author |
|---|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2}
arguments, the kernel will first emit WARN but then have an oops
because id_2 gets dereferenced anyway.
Add the missing id_2 check and move WARN_ON() to the final else branch
to avoid duplicate NULL checks.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Cc: stable@vger.kernel.org # v5.17+
Fixes: 7d30198ee24f ("keys: X.509 public key issuer lookup without AKID")
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The code in crypto_aegis128_process_crypt() had an indentation
issue where spaces were used instead of tabs. This commit
corrects the indentation to use tabs, adhering to the
Linux kernel coding style guidelines.
Issue reported by checkpatch:
- ERROR: code indent should use tabs where possible
No functional changes are intended.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a crypto algorithm with a higher priority is registered, it
kills the spawns of all lower-priority algorithms. Thus it is to
be expected for an algorithm to go away at any time, even during
a self-test. This is now much more common with asynchronous testing.
Remove the printk when an ENOENT is encountered during a self-test.
This is not really an error since the algorithm being tested is no
longer there (i.e., it didn't fail the test which is what we care
about).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pass any errors we get during instance creation up through the
larval.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Fri, Aug 30, 2024 at 10:51:54AM -0700, Eric Biggers wrote:
>
> Given below in defconfig form, use 'make olddefconfig' to apply. The failures
> are nondeterministic and sometimes there are different ones, for example:
>
> [ 0.358017] alg: skcipher: failed to allocate transform for cbc(twofish-generic): -2
> [ 0.358365] alg: self-tests for cbc(twofish) using cbc(twofish-generic) failed (rc=-2)
> [ 0.358535] alg: skcipher: failed to allocate transform for cbc(camellia-generic): -2
> [ 0.358918] alg: self-tests for cbc(camellia) using cbc(camellia-generic) failed (rc=-2)
> [ 0.371533] alg: skcipher: failed to allocate transform for xts(ecb(aes-generic)): -2
> [ 0.371922] alg: self-tests for xts(aes) using xts(ecb(aes-generic)) failed (rc=-2)
>
> Modules are not enabled, maybe that matters (I haven't checked yet).
Yes I think that was the key. This triggers a massive self-test
run which executes in parallel and reveals a few race conditions
in the system. I think it boils down to the following scenario:
Base algorithm X-generic, X-optimised
Template Y
Optimised algorithm Y-X-optimised
Everything gets registered, and then the self-tests are started.
When Y-X-optimised gets tested, it requests the creation of the
generic Y(X-generic). Which then itself undergoes testing.
The race is that after Y(X-generic) gets registered, but just
before it gets tested, X-optimised finally finishes self-testing
which then causes all spawns of X-generic to be destroyed. So
by the time the self-test for Y(X-generic) comes along, it can
no longer find the algorithm. This error then bubbles up all
the way up to the self-test of Y-X-optimised which then fails.
Note that there is some complexity that I've omitted here because
when the generic self-test fails to find Y(X-generic) it actually
triggers the construction of it again which then fails for various
other reasons (these are not important because the construction
should *not* be triggered at this point).
So in a way the error is expected, and we should probably remove
the pr_err for the case where ENOENT is returned for the algorithm
that we're currently testing.
The solution is two-fold. First when an algorithm undergoes
self-testing it should not trigger its construction. Secondly
if an instance larval fails to materialise due to it being destroyed
by a more optimised algorithm coming along, it should obviously
retry the construction.
Remove the check in __crypto_alg_lookup that stops a larval from
matching new requests based on differences in the mask. It is better
to block new requests even if it is wrong and then simply retry the
lookup. If this ends up being the wrong larval it will sort iself
out during the retry.
Reduce the CRYPTO_ALG_TYPE_MASK bits in type during larval creation
as otherwise LSKCIPHER algorithms may not match SKCIPHER larvals.
Also block the instance creation during self-testing in the function
crypto_larval_lookup by checking for CRYPTO_ALG_TESTED in the mask
field.
Finally change the return value when crypto_alg_lookup fails in
crypto_larval_wait to EAGAIN to redo the lookup.
Fixes: 37da5d0ffa7b ("crypto: api - Do not wait for tests during registration")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the min() macro to simplify the jent_read_entropy() function and
improve its readability.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out. The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.
SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering. Use
that directly and remove the crypto_alloc_tfm call.
Also remove some obsolete and unused SIMD API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As registration is usually carried out during module init, this
is a context where as little work as possible should be carried
out. Testing may trigger module loads of underlying components,
which could even lead back to the module that is registering at
the moment. This may lead to dead-locks outside of the Crypto API.
Avoid this by not waiting for the tests to complete. They will
be scheduled but completion will be asynchronous. Any users will
still wait for completion.
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to allow testing to complete asynchronously after the
registration process, instance larvals need to complete prior
to having a test result. Support this by redoing the lookup for
instance larvals after completion. This should locate the pending
test larval and then repeat the wait on that (if it is still pending).
As the lookup is now repeated there is no longer any need to compute
the fulfilment status and all that code can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The user space Jitter RNG library uses the oversampling rate of 3 which
implies that each time stamp is credited with 1/3 bit of entropy. To
obtain 256 bits of entropy, 768 time stamps need to be sampled. The
increase in OSR is applied based on a report where the Jitter RNG is
used on a system exhibiting a challenging environment to collect
entropy.
This OSR default value is now applied to the Linux kernel version of
the Jitter RNG as well.
The increase in the OSR from 1 to 3 also implies that the Jitter RNG is
now slower by default.
Reported-by: Jeff Barnes <jeffbarnes@microsoft.com>
Signed-off-by: Stephan Mueller <smueller@chronox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes: 6637e11e4ad2 ("crypto: rsa - allow only odd e and restrict value in FIPS mode")
Fixes: f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that mpi_rshift can return errors, check them.
Fixes: 35d2bf20683f ("crypto: dh - calculate Q from P for the full public key verification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the __counted_by compiler attribute to the flexible array member
salt to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
switched from using jiffies to ktime-based performance benchmarking.
This works nicely on machines which have a fine-grained ktime()
clocksource as e.g. x86 machines with TSC.
But other machines, e.g. my 4-way HP PARISC server, don't have such
fine-grained clocksources, which is why it seems that 800 xor loops
take zero seconds, which then shows up in the logs as:
xor: measuring software checksum speed
8regs : -1018167296 MB/sec
8regs_prefetch : -1018167296 MB/sec
32regs : -1018167296 MB/sec
32regs_prefetch : -1018167296 MB/sec
Fix this with some small modifications to the existing code to improve
the algorithm to always produce correct results without introducing
major delays for architectures with a fine-grained ktime()
clocksource:
a) Delay start of the timing until ktime() just advanced. On machines
with a fast ktime() this should be just one additional ktime() call.
b) Count the number of loops. Run at minimum 800 loops and finish
earliest when the ktime() counter has progressed.
With that the throughput can now be calculated more accurately under all
conditions.
Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
v2:
- clean up coding style (noticed & suggested by Herbert Xu)
- rephrased & fixed typo in commit message
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implementations of hash functions often have special cases when lengths
are a multiple of the hash function's internal block size (e.g. 64 for
SHA-256, 128 for SHA-512). Currently, when the fuzz testing code
generates lengths, it doesn't prefer any length mod 64 over any other.
This limits the coverage of these special cases.
Therefore, this patch updates the fuzz testing code to generate
power-of-2 lengths and divide messages exactly in half a bit more often.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
iaa_crypto depends on the deflate compression algorithm that's provided
by deflate.
If the algorithm is not available because CRYPTO_DEFLATE=m and deflate
is not inserted, iaa_crypto will request "crypto-deflate-generic".
Deflate will not be inserted because "crypto-deflate-generic" is not a
valid alias.
Add deflate-generic and crypto-deflate-generic aliases to deflate.
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Allow to run skcipher speed for given algorithm.
Case 600 is modified to cover ENCRYPT and DECRYPT
directions.
Example:
modprobe tcrypt mode=600 alg="qat_aes_xts" klen=32
If succeed, the performance numbers will be printed in dmesg:
testing speed of multibuffer qat_aes_xts (qat_aes_xts) encryption
test 0 (256 bit key, 16 byte blocks): 1 operation in 14596 cycles (16 bytes)
...
test 6 (256 bit key, 4096 byte blocks): 1 operation in 8053 cycles (4096 bytes)
Signed-off-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix an off-by-one error where the most significant digit was not
initialized leading to signature verification failures by the testmgr.
Example: If a curve requires ndigits (=9) and diff (=2) indicates that
2 digits need to be set to zero then start with digit 'ndigits - diff' (=7)
and clear 'diff' digits starting from there, so 7 and 8.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/linux-crypto/619bc2de-b18a-4939-a652-9ca886bf6349@linux.ibm.com/T/#m045d8812409ce233c17fcdb8b88b6629c671f9f4
Fixes: 2fd2a82ccbfc ("crypto: ecdsa - Use ecc_digits_from_bytes to create hash digits array")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SM2 algorithm has a single user in the kernel. However, it's
never been integrated properly with that user: asymmetric_keys.
The crux of the issue is that the way it computes its digest with
sm3 does not fit into the architecture of asymmetric_keys. As no
solution has been proposed, remove this algorithm.
It can be resubmitted when it is integrated properly into the
asymmetric_keys subsystem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to convert the r and s
components of the signature to digits directly from the input byte
array. This avoids going through an intermediate byte array that has the
first few bytes filled with zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to create the hash
digits directly from the input byte array. This avoids going through an
intermediate byte array (rawhash) that has the first few bytes filled with
zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Public key blob is not just x and y concatenated. It follows RFC5480
section 2.2. Address this by re-documenting the function with the
correct description of the format.
Link: https://datatracker.ietf.org/doc/html/rfc5480
Fixes: 4e6602916bc6 ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since crypto_shash_setkey(), crypto_ahash_setkey(),
crypto_skcipher_setkey(), and crypto_aead_setkey() apparently need to
work in no-SIMD context on some architectures, make the self-tests cover
this scenario. Specifically, sometimes do the setkey while under
crypto_disable_simd_for_test(), and do this independently from disabling
SIMD for the other parts of the crypto operation since there is no
guarantee that all parts happen in the same context. (I.e., drivers
mustn't store the key in different formats for SIMD vs. no-SIMD.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/cast_common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/af_alg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_hash.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_skcipher.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/ecc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/curve25519-generic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/xor.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/crypto_simd.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The boot-test-finished toggle is only necessary if algapi
is built into the kernel. Do not include this code if it is a module.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a bug in the new ecc P521 code as well as a buggy fix in qat"
* tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes
crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
|
|
Pull more io_uring updates from Jens Axboe:
"This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept
requests.
This is very similar to previous work that enabled the same hint for
doing receives on sockets. By far the majority of the work here is
refactoring to enable the networking side to pass back whether or not
the socket had more pending requests after accepting the current one,
the last patch just wires it up for io_uring.
Not only does this enable applications to know whether there are more
connections to accept right now, it also enables smarter logic for
io_uring multishot accept on whether to retry immediately or wait for
a poll trigger"
* tag 'net-accept-more-20240515' of git://git.kernel.dk/linux:
io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept
net: pass back whether socket was empty post accept
net: have do_accept() take a struct proto_accept_arg argument
net: change proto and proto_ops accept type
|
|
Prevent ecc_digits_from_bytes from reading too many bytes from the input
byte array in case an insufficient number of bytes is provided to fill the
output digit array of ndigits. Therefore, initialize the most significant
digits with 0 to avoid trying to read too many bytes later on. Convert the
function into a regular function since it is getting too big for an inline
function.
If too many bytes are provided on the input byte array the extra bytes
are ignored since the input variable 'ndigits' limits the number of digits
that will be filled.
Fixes: d67c96fb97b5 ("crypto: ecdsa - Convert byte arrays with key coordinates to digits")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull asymmetric keys update from Jarkko Sakkinen:
"Add a self-test testing PCKS#7 signed data against ECDSA key and
couple of bug fixes for missing deps"
* tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: Add ECDSA signature verification self-test
certs: Move RSA self-test data to separate file
KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
KEYS: asymmetric: Add missing dependency on CRYPTO_SIG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Commit c27b2d2012e1 ("crypto: testmgr - allow ecdsa-nist-p256 and -p384
in FIPS mode") enabled support for ECDSA in crypto/testmgr.c. The
PKCS#7 signature verification API builds upon the KCAPI primitives to
perform its high-level operations. Therefore, this change in testmgr.c
also allows ECDSA to be used by the PKCS#7 signature verification API
(in FIPS mode).
However, from a FIPS perspective, the PKCS#7 signature verification API
is a distinct "service" from the KCAPI primitives. This is because the
PKCS#7 API performs a "full" signature verification, which consists of
both hashing the data to be verified, and the public key operation.
On the other hand, the KCAPI primitive does not perform this hashing
step - it accepts pre-hashed data from the caller and only performs the
public key operation.
For this reason, the ECDSA self-tests in crypto/testmgr.c are not
sufficient to cover ECDSA signature verification offered by the PKCS#7
API. This is reflected by the self-test already present in this file
for RSA PKCS#1 v1.5 signature verification.
The solution is simply to add a second self-test here for ECDSA. P-256
with SHA-256 hashing was chosen as those parameters should remain
FIPS-approved for the foreseeable future, while keeping the performance
impact to a minimum. The ECDSA certificate and PKCS#7 signed data was
generated using OpenSSL. The input data is identical to the input data
for the existing RSA self-test.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In preparation of adding new ECDSA self-tests, the existing data for
the RSA self-tests is moved to a separate file. This file is only
compiled if the new CONFIG_FIPS_SIGNATURE_SELFTEST_RSA configuration
option is set, which ensures that the required dependencies (RSA,
SHA-256) are present. Otherwise, the kernel would panic when trying to
execute the self-test.
The introduction of this new option, rather than adding the
dependencies to the existing CONFIG_FIPS_SIGNATURE_SELFTEST option,
allows for additional self-tests to be added for different algorithms.
The kernel can then be configured to only execute the self-tests for
those algorithms that are included.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
|
|
Since the signature self-test uses RSA and SHA-256, it must only be
enabled when those algorithms are enabled. Otherwise it fails and
panics the kernel on boot-up.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com
Fixes: 3cde3174eb91 ("certs: Add FIPS selftests")
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build
errors like the following, which were possible with
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n:
ld: vmlinux.o: in function `public_key_verify_signature':
(.text+0x306280): undefined reference to `crypto_alloc_sig'
ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey'
ld: (.text+0x306324): undefined reference to `crypto_sig_verify'
ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey'
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
wait_for_completion_killable_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_killable_timeout() causing patterns like:
timeout = wait_for_completion_killable_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The private key in ctx->private_key is currently initialized in reverse
byte order in ecdh_set_secret and whenever the key is needed in proper
byte order the variable priv is introduced and the bytes from
ctx->private_key are copied into priv while being byte-swapped
(ecc_swap_digits). To get rid of the unnecessary byte swapping initialize
ctx->private_key in proper byte order and clean up all functions that were
previously using priv or were called with ctx->private_key:
- ecc_gen_privkey: Directly initialize the passed ctx->private_key with
random bytes filling all the digits of the private key. Get rid of the
priv variable. This function only has ecdh_set_secret as a caller to
create NIST P192/256/384 private keys.
- crypto_ecdh_shared_secret: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
- ecc_make_pub_key: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ecc_is_key_valid expects a key with the most significant digit in the last
entry of the digit array. Currently ecdh_set_secret passes a reversed key
to ecc_is_key_valid that then passes the rather simple test checking
whether the private key is in range [2, n-3]. For all current ecdh-
supported curves (NIST P192/256/384) the 'n' parameter is a rather large
number, therefore easily passing this test.
Throughout the ecdh and ecc codebase the variable 'priv' is used for a
private_key holding the bytes in proper byte order. Therefore, introduce
priv in ecdh_set_secret and copy the bytes from ctx->private_key into
priv in proper byte order by using ecc_swap_digits. Pass priv to
ecc_is_valid_key.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key.
Signed-off-by: Hailey Mothershead <hailmo@amazon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement skcipher crypto in BPF crypto framework.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20240422225024.2847039-3-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a DEFINE_FREE() clause for x509_certificate structs and use it in
x509_cert_parse() and x509_key_preparse(). These are the only functions
where scope-based x509_certificate allocation currently makes sense.
A third user will be introduced with the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
Unlike most other DEFINE_FREE() clauses, this one checks for IS_ERR()
instead of NULL before calling x509_free_certificate() at end of scope.
That's because the "constructor" of x509_certificate structs,
x509_cert_parse(), returns a valid pointer or an ERR_PTR(), but never
NULL.
Comparing the Assembler output before/after has shown they are identical,
save for the fact that gcc-12 always generates two return paths when
__cleanup() is used, one for the success case and one for the error case.
In x509_cert_parse(), add a hint for the compiler that kzalloc() never
returns an ERR_PTR(). Otherwise the compiler adds a gratuitous IS_ERR()
check on return. Introduce an assume() macro for this which can be
re-used elsewhere in the kernel to provide hints for the compiler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Link: https://lore.kernel.org/all/20231003153937.000034ca@Huawei.com/
Link: https://lwn.net/Articles/934679/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable the x509 parser to accept NIST P521 certificates and add the
OID for ansip521r1, which is the identifier for NIST P521.
Cc: David Howells <dhowells@redhat.com>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adjust the calculation of the maximum signature size for support of
NIST P521. While existing curves may prepend a 0 byte to their coordinates
(to make the number positive), NIST P521 will not do this since only the
first bit in the most significant byte is used.
If the encoding of the x & y coordinates requires at least 128 bytes then
an additional byte is needed for the encoding of the length. Take this into
account when calculating the maximum signature size.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register NIST P521 as an akcipher and extend the testmgr with
NIST P521-specific test vectors.
Add a module alias so the module gets automatically loaded by the crypto
subsystem when the curve is needed.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In cases where 'keylen' was referring to the size of the buffer used by
a curve's digits, it does not reflect the purpose of the variable anymore
once NIST P521 is used. What it refers to then is the size of the buffer,
which may be a few bytes larger than the size a coordinate of a key.
Therefore, rename keylen to bufsize where appropriate.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the usage of ndigits with nbits where precise space calculations
are needed, such as in ecdsa_max_size where the length of a coordinate is
determined.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the parameters for the NIST P521 curve and define a new curve ID
for it. Make the curve available in ecc_get_curve.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
