| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
Add device tree for Cirrus EDB9302.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree file for Technologic Systems ts7250 board and
Liebherr bk3 board which have many in common, both are based on
ep9302 SoC variant.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for Cirrus Logic EP93XX SoC's family.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64 SoCs Device Tree changes for
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
* tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837/bcm2712: adjust local intc node names
arm64: dts: broadcom: Add minimal support for Raspberry Pi 5
Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.12
- New machines
* IBM P11 AST2600 BMC machines, named Blueridge and Fuji
* Meta's Catalina AST2600 BMC
- Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3
- Various changes to the dtsi to keep the YAML checker happy
* tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits)
ARM: dts: aspeed: catalina: Update io expander line names
ARM: dts: aspeed: catalina: Add pdb cpld io expander
ARM: dts: aspeed: harma: Remove pca9546
ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings
ARM: dts: aspeed: harma: Enable mctp controller
ARM: dts: aspeed: harma: Add temperature device
ARM: dts: aspeed: harma: Add fru device
ARM: dts: aspeed: harma: Remove multi-host property
ARM: dts: aspeed: harma: Add power monitor xdp710
ARM: dts: aspeed: harma: Add ina238
ARM: dts: aspeed: harma: Add sgpio name
ARM: dts: aspeed: harma: Add VR devices
ARM: dts: aspeed: harma: Revise hsc chip
ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes
ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes
ARM: dts: aspeed: Clean up AST2500 pinctrl properties
ARM: dts: aspeed: Remove undocumented XDMA nodes
ARM: dts: aspeed: Specify required properties for sram node
ARM: dts: aspeed: Specify correct generic compatible for CVIC
ARM: dts: aspeed: Fix coprocessor interrupt controller node name
...
Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
More pwm, i2s and i2c nodes for the RV1126 soc.
* tag 'v6.12-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add pwm node for RV1126
ARM: dts: rockchip: Add i2s0 node for RV1126
ARM: dts: rockchip: Add i2c3 node for RV1126
Link: https://lore.kernel.org/r/1862312.dTVjPilprF@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.12
1. Realview: correct unit addresses (e.g. drop when not valid).
2. Nuvoton: correct node name to match bindings.
* tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindings
arm: dts: realview: Add/drop missing/spurious unit-addreses
Link: https://lore.kernel.org/r/20240906140513.71307-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.11:
- simple dt bindings check fix for gpio keys node name
* tag 'amlogic-arm-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8b-ec100: align GPIO keys node name with bindings
Link: https://lore.kernel.org/r/220683c1-e250-4c55-bbe5-c36e89391c32@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.12
MSM8226 gains CPU frequency scaling support and CPU thermal zones wired
up. The Nokia Lumia 630 and 830 gains inertial sensors.
Samsung Galaxy S5 gains pstore functionality.
A range of fixes for DeviceTree validation issues are added.
* tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add generic compat string to RPM glink channels
ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensors
ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface
ARM: dts: qcom: msm8226: Hook up CPU cooling
ARM: dts: qcom: msm8226: Add CPU frequency scaling support
ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata node
ARM: dts: qcom: apq8064: drop reg-names on sata-phy node
ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore node
ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
ARM: dts: qcom: pma8084: add pon node
Link: https://lore.kernel.org/r/20240904193228.15466-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
* tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration
ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT
ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d
ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board
Link: https://lore.kernel.org/r/1091e600-f1e7-4d1f-b83d-c67e8073772c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: ti: mix am335x cleanups for v6.12
* tag 'omap-for-v6.12/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: ti: omap: am335x-wega: Fix audio clock provider
ARM: dts: ti: omap: am335x-regor: Fix RS485 settings
ARM: dts: omap: am335x-bone: convert NVMEM content to layout syntax
ARM: dts: am335x-bone-common: Increase MDIO reset deassert time
Link: https://lore.kernel.org/r/7hh6avark1.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
DHCOM PDK2
By default the SGTL5000 derives bit and frame clock from MCLK, which
does not produce particularly accurate results. The SGTL5000 PLL does
improve the accuracy, but also increases power consumption. Using the
SoC SAI interface as bit and frame clock source results in the best
accuracy without the power consumption increase downside. Switch the
bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to
match.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Switch the bitclock-master and frame-master properties from phandle to
flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle
in this system DT, since the phandle points to the endpoint node which
contains the property itself. Simplify the DT. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Sort properties alphabetically in audio endpoints of STM32MP15xx
DHCOM PDK2 DT. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Introduce device tree support for the MECIO1 and MECT1S board variants.
MECIO1 is an I/O and motor control board used in blood sample analysis
machines. MECT1S is a 1000Base-T1 switch for internal machine networks
of blood sample analysis machines.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.
Some additional changes was made:
- To avoid this kind of regression, all references to pin configuration
nodes are now referenced directly using the format &{label/subnode}.
- /delete-property/ bias-disable; was added everywhere where bias-pull-up
is used
- redundant properties like driver-push-pull are removed
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The RTL8211 PHY on DH STM32MP13xx DHCOR DHSBC carrier board supports HW
LED offload, the LEDs can be configured on link at 10/100/1000 line rate
and on RXTX activity. There are two PHYs on this board, each only has two
out of three LEDs connected to the PHY LED outputs. Describe this hardware
configuration in DT.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
This enables DDR50 mode for the eMMC on Octavo OSD32MP1-RED board.
Fixes: be78ab4f632c ("ARM: dts: stm32: add initial support for stm32mp157-odyssey board")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
board
Describe ethernet MAC address nvmem cells in DH STM32MP13xx DHCOR DHSBC
board DT. The MAC address can be fused in BSEC OTP fuses and used to set
up MAC address for both ethernet MACs on this board.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The RTL8211F PHY clock output is not used on DH STM32MP13xx DHCOR DHSBC
board, disable it to improve EMI characteristics.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
DHSBC board
The RTL8211F PHY gets confused when the MDIO bus lines get switched
to ANALOG during suspend/resume cycle. Keep the MDIO and MDC lines
in AF during suspend/resume to avoid confusing the PHY. The PHY can
be brought out of the confused state by restarting auto-negotiation
too, but that seems like an odd workaround and shouldn't be in the
PHY driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add previously omitted pwm node and possible pinctrl for Rockchip RV1126
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Link: https://lore.kernel.org/r/20240903105245.715899-4-karthikeyan@linumiz.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add i2s0 node and possible pinctrl for Rockchip RV1126
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Link: https://lore.kernel.org/r/20240903105245.715899-3-karthikeyan@linumiz.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add i2c3 node and possible pinctrl for Rockchip RV1126
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Link: https://lore.kernel.org/r/20240903105245.715899-2-karthikeyan@linumiz.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
spidev on the elgin-r1 got a real compatible, the rk3128 could enable its
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
* tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1
ARM: dts: rockchip: Add vpu nodes for RK3128
ARM: dts: rockchip: use constant for HCLK_SFC on rk3128
Link: https://lore.kernel.org/r/3405397.RL5eaSpR8r@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The saif[01] nodes are specific to other group of the imx287
based devices, so need to be moved to different devices description file.
Leaving them here causes issues with next revision of XEA device.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Due to some operational problems (HW) the maximal speed of the SPI
frequency for flash memory has been reduced by half.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop an empty pin configuration node placeholder, because bindings
require 'fsl,pins' property:
imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master
SAIF.
Change it accordingly, to fix the following dt-schema warnings:
saif@80042000: fsl,saif-master: True is not of type 'array'
saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since the muxing is described already in imx6qdl-tqma6 can be reused
by this variant. No functional change.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
While at it change node name to 'temperature-sensor@48' to
describe the function of the IC.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Move the pinmux entries to the variant where they are actual
used. No functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp"
prefix. Diff looks big but this should have no functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
