diff options
Diffstat (limited to 'include/drm/dp/drm_dp_helper.h')
| -rw-r--r-- | include/drm/dp/drm_dp_helper.h | 2377 |
1 files changed, 2377 insertions, 0 deletions
diff --git a/include/drm/dp/drm_dp_helper.h b/include/drm/dp/drm_dp_helper.h new file mode 100644 index 000000000000..51e02cf75277 --- /dev/null +++ b/include/drm/dp/drm_dp_helper.h @@ -0,0 +1,2377 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/types.h> +#include <drm/drm_connector.h> + +struct drm_device; +struct drm_dp_aux; +struct drm_panel; + +/* + * Unless otherwise noted, all values are from the DP 1.1a spec. Note that + * DP and DPCD versions are independent. Differences from 1.0 are not noted, + * 1.0 devices basically don't exist in the wild. + * + * Abbreviations, in chronological order: + * + * eDP: Embedded DisplayPort version 1 + * DPI: DisplayPort Interoperability Guideline v1.1a + * 1.2: DisplayPort 1.2 + * MST: Multistream Transport - part of DP 1.2a + * + * 1.2 formally includes both eDP and DPI definitions. + */ + +/* MSA (Main Stream Attribute) MISC bits (as MISC1<<8|MISC0) */ +#define DP_MSA_MISC_SYNC_CLOCK (1 << 0) +#define DP_MSA_MISC_INTERLACE_VTOTAL_EVEN (1 << 8) +#define DP_MSA_MISC_STEREO_NO_3D (0 << 9) +#define DP_MSA_MISC_STEREO_PROG_RIGHT_EYE (1 << 9) +#define DP_MSA_MISC_STEREO_PROG_LEFT_EYE (3 << 9) +/* bits per component for non-RAW */ +#define DP_MSA_MISC_6_BPC (0 << 5) +#define DP_MSA_MISC_8_BPC (1 << 5) +#define DP_MSA_MISC_10_BPC (2 << 5) +#define DP_MSA_MISC_12_BPC (3 << 5) +#define DP_MSA_MISC_16_BPC (4 << 5) +/* bits per component for RAW */ +#define DP_MSA_MISC_RAW_6_BPC (1 << 5) +#define DP_MSA_MISC_RAW_7_BPC (2 << 5) +#define DP_MSA_MISC_RAW_8_BPC (3 << 5) +#define DP_MSA_MISC_RAW_10_BPC (4 << 5) +#define DP_MSA_MISC_RAW_12_BPC (5 << 5) +#define DP_MSA_MISC_RAW_14_BPC (6 << 5) +#define DP_MSA_MISC_RAW_16_BPC (7 << 5) +/* pixel encoding/colorimetry format */ +#define _DP_MSA_MISC_COLOR(misc1_7, misc0_21, misc0_3, misc0_4) \ + ((misc1_7) << 15 | (misc0_4) << 4 | (misc0_3) << 3 | ((misc0_21) << 1)) +#define DP_MSA_MISC_COLOR_RGB _DP_MSA_MISC_COLOR(0, 0, 0, 0) +#define DP_MSA_MISC_COLOR_CEA_RGB _DP_MSA_MISC_COLOR(0, 0, 1, 0) +#define DP_MSA_MISC_COLOR_RGB_WIDE_FIXED _DP_MSA_MISC_COLOR(0, 3, 0, 0) +#define DP_MSA_MISC_COLOR_RGB_WIDE_FLOAT _DP_MSA_MISC_COLOR(0, 3, 0, 1) +#define DP_MSA_MISC_COLOR_Y_ONLY _DP_MSA_MISC_COLOR(1, 0, 0, 0) +#define DP_MSA_MISC_COLOR_RAW _DP_MSA_MISC_COLOR(1, 1, 0, 0) +#define DP_MSA_MISC_COLOR_YCBCR_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 1, 0) +#define DP_MSA_MISC_COLOR_YCBCR_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 1, 1) +#define DP_MSA_MISC_COLOR_YCBCR_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 1, 0) +#define DP_MSA_MISC_COLOR_YCBCR_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 1, 1) +#define DP_MSA_MISC_COLOR_XVYCC_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 0, 0) +#define DP_MSA_MISC_COLOR_XVYCC_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 0, 1) +#define DP_MSA_MISC_COLOR_XVYCC_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 0, 0) +#define DP_MSA_MISC_COLOR_XVYCC_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 0, 1) +#define DP_MSA_MISC_COLOR_OPRGB _DP_MSA_MISC_COLOR(0, 0, 1, 1) +#define DP_MSA_MISC_COLOR_DCI_P3 _DP_MSA_MISC_COLOR(0, 3, 1, 0) +#define DP_MSA_MISC_COLOR_COLOR_PROFILE _DP_MSA_MISC_COLOR(0, 3, 1, 1) +#define DP_MSA_MISC_COLOR_VSC_SDP (1 << 14) + +#define DP_AUX_MAX_PAYLOAD_BYTES 16 + +#define DP_AUX_I2C_WRITE 0x0 +#define DP_AUX_I2C_READ 0x1 +#define DP_AUX_I2C_WRITE_STATUS_UPDATE 0x2 +#define DP_AUX_I2C_MOT 0x4 +#define DP_AUX_NATIVE_WRITE 0x8 +#define DP_AUX_NATIVE_READ 0x9 + +#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0) +#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0) +#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0) +#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0) + +#define DP_AUX_I2C_REPLY_ACK (0x0 << 2) +#define DP_AUX_I2C_REPLY_NACK (0x1 << 2) +#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2) +#define DP_AUX_I2C_REPLY_MASK (0x3 << 2) + +/* DPCD Field Address Mapping */ + +/* Receiver Capability */ +#define DP_DPCD_REV 0x000 +# define DP_DPCD_REV_10 0x10 +# define DP_DPCD_REV_11 0x11 +# define DP_DPCD_REV_12 0x12 +# define DP_DPCD_REV_13 0x13 +# define DP_DPCD_REV_14 0x14 + +#define DP_MAX_LINK_RATE 0x001 + +#define DP_MAX_LANE_COUNT 0x002 +# define DP_MAX_LANE_COUNT_MASK 0x1f +# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */ +# define DP_ENHANCED_FRAME_CAP (1 << 7) + +#define DP_MAX_DOWNSPREAD 0x003 +# define DP_MAX_DOWNSPREAD_0_5 (1 << 0) +# define DP_STREAM_REGENERATION_STATUS_CAP (1 << 1) /* 2.0 */ +# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) +# define DP_TPS4_SUPPORTED (1 << 7) + +#define DP_NORP 0x004 + +#define DP_DOWNSTREAMPORT_PRESENT 0x005 +# define DP_DWN_STRM_PORT_PRESENT (1 << 0) +# define DP_DWN_STRM_PORT_TYPE_MASK 0x06 +# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1) +# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1) +# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1) +# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1) +# define DP_FORMAT_CONVERSION (1 << 3) +# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */ + +#define DP_MAIN_LINK_CHANNEL_CODING 0x006 +# define DP_CAP_ANSI_8B10B (1 << 0) +# define DP_CAP_ANSI_128B132B (1 << 1) /* 2.0 */ + +#define DP_DOWN_STREAM_PORT_COUNT 0x007 +# define DP_PORT_COUNT_MASK 0x0f +# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ +# define DP_OUI_SUPPORT (1 << 7) + +#define DP_RECEIVE_PORT_0_CAP_0 0x008 +# define DP_LOCAL_EDID_PRESENT (1 << 1) +# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2) + +#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009 + +#define DP_RECEIVE_PORT_1_CAP_0 0x00a +#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b + +#define DP_I2C_SPEED_CAP 0x00c /* DPI */ +# define DP_I2C_SPEED_1K 0x01 +# define DP_I2C_SPEED_5K 0x02 +# define DP_I2C_SPEED_10K 0x04 +# define DP_I2C_SPEED_100K 0x08 +# define DP_I2C_SPEED_400K 0x10 +# define DP_I2C_SPEED_1M 0x20 + +#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0) +# define DP_FRAMING_CHANGE_CAP (1 << 1) +# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */ + +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F /* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7) /* DP 1.3 */ + +#define DP_ADAPTER_CAP 0x00f /* 1.2 */ +# define DP_FORCE_LOAD_SENSE_CAP (1 << 0) +# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1) + +#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ +# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ + +/* Multiple stream transport */ +#define DP_FAUX_CAP 0x020 /* 1.2 */ +# define DP_FAUX_CAP_1 (1 << 0) + +#define DP_SINK_VIDEO_FALLBACK_FORMATS 0x020 /* 2.0 */ +# define DP_FALLBACK_1024x768_60HZ_24BPP (1 << 0) +# define DP_FALLBACK_1280x720_60HZ_24BPP (1 << 1) +# define DP_FALLBACK_1920x1080_60HZ_24BPP (1 << 2) + +#define DP_MSTM_CAP 0x021 /* 1.2 */ +# define DP_MST_CAP (1 << 0) +# define DP_SINGLE_STREAM_SIDEBAND_MSG (1 << 1) /* 2.0 */ + +#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */ + +/* AV_SYNC_DATA_BLOCK 1.2 */ +#define DP_AV_GRANULARITY 0x023 +# define DP_AG_FACTOR_MASK (0xf << 0) +# define DP_AG_FACTOR_3MS (0 << 0) +# define DP_AG_FACTOR_2MS (1 << 0) +# define DP_AG_FACTOR_1MS (2 << 0) +# define DP_AG_FACTOR_500US (3 << 0) +# define DP_AG_FACTOR_200US (4 << 0) +# define DP_AG_FACTOR_100US (5 << 0) +# define DP_AG_FACTOR_10US (6 << 0) +# define DP_AG_FACTOR_1US (7 << 0) +# define DP_VG_FACTOR_MASK (0xf << 4) +# define DP_VG_FACTOR_3MS (0 << 4) +# define DP_VG_FACTOR_2MS (1 << 4) +# define DP_VG_FACTOR_1MS (2 << 4) +# define DP_VG_FACTOR_500US (3 << 4) +# define DP_VG_FACTOR_200US (4 << 4) +# define DP_VG_FACTOR_100US (5 << 4) + +#define DP_AUD_DEC_LAT0 0x024 +#define DP_AUD_DEC_LAT1 0x025 + +#define DP_AUD_PP_LAT0 0x026 +#define DP_AUD_PP_LAT1 0x027 + +#define DP_VID_INTER_LAT 0x028 + +#define DP_VID_PROG_LAT 0x029 + +#define DP_REP_LAT 0x02a + +#define DP_AUD_DEL_INS0 0x02b +#define DP_AUD_DEL_INS1 0x02c +#define DP_AUD_DEL_INS2 0x02d +/* End of AV_SYNC_DATA_BLOCK */ + +#define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */ +# define DP_ALPM_CAP (1 << 0) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_CAP (1 << 0) + +#define DP_GUID 0x030 /* 1.2 */ + +#define DP_DSC_SUPPORT 0x060 /* DP 1.4 */ +# define DP_DSC_DECOMPRESSION_IS_SUPPORTED (1 << 0) + +#define DP_DSC_REV 0x061 +# define DP_DSC_MAJOR_MASK (0xf << 0) +# define DP_DSC_MINOR_MASK (0xf << 4) +# define DP_DSC_MAJOR_SHIFT 0 +# define DP_DSC_MINOR_SHIFT 4 + +#define DP_DSC_RC_BUF_BLK_SIZE 0x062 +# define DP_DSC_RC_BUF_BLK_SIZE_1 0x0 +# define DP_DSC_RC_BUF_BLK_SIZE_4 0x1 +# define DP_DSC_RC_BUF_BLK_SIZE_16 0x2 +# define DP_DSC_RC_BUF_BLK_SIZE_64 0x3 + +#define DP_DSC_RC_BUF_SIZE 0x063 + +#define DP_DSC_SLICE_CAP_1 0x064 +# define DP_DSC_1_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_2_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_4_PER_DP_DSC_SINK (1 << 3) +# define DP_DSC_6_PER_DP_DSC_SINK (1 << 4) +# define DP_DSC_8_PER_DP_DSC_SINK (1 << 5) +# define DP_DSC_10_PER_DP_DSC_SINK (1 << 6) +# define DP_DSC_12_PER_DP_DSC_SINK (1 << 7) + +#define DP_DSC_LINE_BUF_BIT_DEPTH 0x065 +# define DP_DSC_LINE_BUF_BIT_DEPTH_MASK (0xf << 0) +# define DP_DSC_LINE_BUF_BIT_DEPTH_9 0x0 +# define DP_DSC_LINE_BUF_BIT_DEPTH_10 0x1 +# define DP_DSC_LINE_BUF_BIT_DEPTH_11 0x2 +# define DP_DSC_LINE_BUF_BIT_DEPTH_12 0x3 +# define DP_DSC_LINE_BUF_BIT_DEPTH_13 0x4 +# define DP_DSC_LINE_BUF_BIT_DEPTH_14 0x5 +# define DP_DSC_LINE_BUF_BIT_DEPTH_15 0x6 +# define DP_DSC_LINE_BUF_BIT_DEPTH_16 0x7 +# define DP_DSC_LINE_BUF_BIT_DEPTH_8 0x8 + +#define DP_DSC_BLK_PREDICTION_SUPPORT 0x066 +# define DP_DSC_BLK_PREDICTION_IS_SUPPORTED (1 << 0) + +#define DP_DSC_MAX_BITS_PER_PIXEL_LOW 0x067 /* eDP 1.4 */ + +#define DP_DSC_MAX_BITS_PER_PIXEL_HI 0x068 /* eDP 1.4 */ +# define DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK (0x3 << 0) +# define DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT 8 + +#define DP_DSC_DEC_COLOR_FORMAT_CAP 0x069 +# define DP_DSC_RGB (1 << 0) +# define DP_DSC_YCbCr444 (1 << 1) +# define DP_DSC_YCbCr422_Simple (1 << 2) +# define DP_DSC_YCbCr422_Native (1 << 3) +# define DP_DSC_YCbCr420_Native (1 << 4) + +#define DP_DSC_DEC_COLOR_DEPTH_CAP 0x06A +# define DP_DSC_8_BPC (1 << 1) +# define DP_DSC_10_BPC (1 << 2) +# define DP_DSC_12_BPC (1 << 3) + +#define DP_DSC_PEAK_THROUGHPUT 0x06B +# define DP_DSC_THROUGHPUT_MODE_0_MASK (0xf << 0) +# define DP_DSC_THROUGHPUT_MODE_0_SHIFT 0 +# define DP_DSC_THROUGHPUT_MODE_0_UNSUPPORTED 0 +# define DP_DSC_THROUGHPUT_MODE_0_340 (1 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_400 (2 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_450 (3 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_500 (4 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_550 (5 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_600 (6 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_650 (7 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_700 (8 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_750 (9 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_800 (10 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_850 (11 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_900 (12 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_950 (13 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_1000 (14 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_170 (15 << 0) /* 1.4a */ +# define DP_DSC_THROUGHPUT_MODE_1_MASK (0xf << 4) +# define DP_DSC_THROUGHPUT_MODE_1_SHIFT 4 +# define DP_DSC_THROUGHPUT_MODE_1_UNSUPPORTED 0 +# define DP_DSC_THROUGHPUT_MODE_1_340 (1 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_400 (2 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_450 (3 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_500 (4 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_550 (5 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_600 (6 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_650 (7 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_700 (8 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_750 (9 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_800 (10 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_850 (11 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_900 (12 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_950 (13 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_1000 (14 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_170 (15 << 4) + +#define DP_DSC_MAX_SLICE_WIDTH 0x06C +#define DP_DSC_MIN_SLICE_WIDTH_VALUE 2560 +#define DP_DSC_SLICE_WIDTH_MULTIPLIER 320 + +#define DP_DSC_SLICE_CAP_2 0x06D +# define DP_DSC_16_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_20_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_24_PER_DP_DSC_SINK (1 << 2) + +#define DP_DSC_BITS_PER_PIXEL_INC 0x06F +# define DP_DSC_BITS_PER_PIXEL_1_16 0x0 +# define DP_DSC_BITS_PER_PIXEL_1_8 0x1 +# define DP_DSC_BITS_PER_PIXEL_1_4 0x2 +# define DP_DSC_BITS_PER_PIXEL_1_2 0x3 +# define DP_DSC_BITS_PER_PIXEL_1 0x4 + +#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ +# define DP_PSR_IS_SUPPORTED 1 +# define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */ +# define DP_PSR2_WITH_Y_COORD_IS_SUPPORTED 3 /* eDP 1.4a */ + +#define DP_PSR_CAPS 0x071 /* XXX 1.2? */ +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4) /* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5) /* eDP 1.4b */ + +#define DP_PSR2_SU_X_GRANULARITY 0x072 /* eDP 1.4b */ +#define DP_PSR2_SU_Y_GRANULARITY 0x074 /* eDP 1.4b */ + +/* + * 0x80-0x8f describe downstream port capabilities, but there are two layouts + * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, + * each port's descriptor is one byte wide. If it was set, each port's is + * four bytes wide, starting with the one byte from the base info. As of + * DP interop v1.1a only VGA defines additional detail. + */ + +/* offset 0 */ +#define DP_DOWNSTREAM_PORT_0 0x80 +# define DP_DS_PORT_TYPE_MASK (7 << 0) +# define DP_DS_PORT_TYPE_DP 0 +# define DP_DS_PORT_TYPE_VGA 1 +# define DP_DS_PORT_TYPE_DVI 2 +# define DP_DS_PORT_TYPE_HDMI 3 +# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_TYPE_DP_DUALMODE 5 +# define DP_DS_PORT_TYPE_WIRELESS 6 +# define DP_DS_PORT_HPD (1 << 3) +# define DP_DS_NON_EDID_MASK (0xf << 4) +# define DP_DS_NON_EDID_720x480i_60 (1 << 4) +# define DP_DS_NON_EDID_720x480i_50 (2 << 4) +# define DP_DS_NON_EDID_1920x1080i_60 (3 << 4) +# define DP_DS_NON_EDID_1920x1080i_50 (4 << 4) +# define DP_DS_NON_EDID_1280x720_60 (5 << 4) +# define DP_DS_NON_EDID_1280x720_50 (7 << 4) +/* offset 1 for VGA is maximum megapixels per second / 8 */ +/* offset 1 for DVI/HDMI is maximum TMDS clock in Mbps / 2.5 */ +/* offset 2 for VGA/DVI/HDMI */ +# define DP_DS_MAX_BPC_MASK (3 << 0) +# define DP_DS_8BPC 0 +# define DP_DS_10BPC 1 +# define DP_DS_12BPC 2 +# define DP_DS_16BPC 3 +/* HDMI2.1 PCON FRL CONFIGURATION */ +# define DP_PCON_MAX_FRL_BW (7 << 2) +# define DP_PCON_MAX_0GBPS (0 << 2) +# define DP_PCON_MAX_9GBPS (1 << 2) +# define DP_PCON_MAX_18GBPS (2 << 2) +# define DP_PCON_MAX_24GBPS (3 << 2) +# define DP_PCON_MAX_32GBPS (4 << 2) +# define DP_PCON_MAX_40GBPS (5 << 2) +# define DP_PCON_MAX_48GBPS (6 << 2) +# define DP_PCON_SOURCE_CTL_MODE (1 << 5) + +/* offset 3 for DVI */ +# define DP_DS_DVI_DUAL_LINK (1 << 1) +# define DP_DS_DVI_HIGH_COLOR_DEPTH (1 << 2) +/* offset 3 for HDMI */ +# define DP_DS_HDMI_FRAME_SEQ_TO_FRAME_PACK (1 << 0) +# define DP_DS_HDMI_YCBCR422_PASS_THROUGH (1 << 1) +# define DP_DS_HDMI_YCBCR420_PASS_THROUGH (1 << 2) +# define DP_DS_HDMI_YCBCR444_TO_422_CONV (1 << 3) +# define DP_DS_HDMI_YCBCR444_TO_420_CONV (1 << 4) + +/* + * VESA DP-to-HDMI PCON Specification adds caps for colorspace + * conversion in DFP cap DPCD 83h. Sec6.1 Table-3. + * Based on the available support the source can enable + * color conversion by writing into PROTOCOL_COVERTER_CONTROL_2 + * DPCD 3052h. + */ +# define DP_DS_HDMI_BT601_RGB_YCBCR_CONV (1 << 5) +# define DP_DS_HDMI_BT709_RGB_YCBCR_CONV (1 << 6) +# define DP_DS_HDMI_BT2020_RGB_YCBCR_CONV (1 << 7) + +#define DP_MAX_DOWNSTREAM_PORTS 0x10 + +/* DP Forward error Correction Registers */ +#define DP_FEC_CAPABILITY 0x090 /* 1.4 */ +# define DP_FEC_CAPABLE (1 << 0) +# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1) +# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2) +# define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3) +#define DP_FEC_CAPABILITY_1 0x091 /* 2.0 */ + +/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */ +#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xD /* 0x92 through 0x9E */ +#define DP_PCON_DSC_ENCODER 0x092 +# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0) +# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1) + +/* DP-HDMI2.1 PCON DSC Version */ +#define DP_PCON_DSC_VERSION 0x093 +# define DP_PCON_DSC_MAJOR_MASK (0xF << 0) +# define DP_PCON_DSC_MINOR_MASK (0xF << 4) +# define DP_PCON_DSC_MAJOR_SHIFT 0 +# define DP_PCON_DSC_MINOR_SHIFT 4 + +/* DP-HDMI2.1 PCON DSC RC Buffer block size */ +#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094 +# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0) +# define DP_PCON_DSC_RC_BUF_BLK_1KB 0 +# define DP_PCON_DSC_RC_BUF_BLK_4KB 1 +# define DP_PCON_DSC_RC_BUF_BLK_16KB 2 +# define DP_PCON_DSC_RC_BUF_BLK_64KB 3 + +/* DP-HDMI2.1 PCON DSC RC Buffer size */ +#define DP_PCON_DSC_RC_BUF_SIZE 0x095 + +/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */ +#define DP_PCON_DSC_SLICE_CAP_1 0x096 +# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3) +# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4) +# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5) +# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6) +# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7) + +#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097 +# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0) +# define DP_PCON_DSC_DEPTH_9_BITS 0 +# define DP_PCON_DSC_DEPTH_10_BITS 1 +# define DP_PCON_DSC_DEPTH_11_BITS 2 +# define DP_PCON_DSC_DEPTH_12_BITS 3 +# define DP_PCON_DSC_DEPTH_13_BITS 4 +# define DP_PCON_DSC_DEPTH_14_BITS 5 +# define DP_PCON_DSC_DEPTH_15_BITS 6 +# define DP_PCON_DSC_DEPTH_16_BITS 7 +# define DP_PCON_DSC_DEPTH_8_BITS 8 + +#define DP_PCON_DSC_BLOCK_PREDICTION 0x098 +# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0) + +#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099 +# define DP_PCON_DSC_ENC_RGB (0x1 << 0) +# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1) +# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2) +# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3) +# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4) + +#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A +# define DP_PCON_DSC_ENC_8BPC (0x1 << 1) +# define DP_PCON_DSC_ENC_10BPC (0x1 << 2) +# define DP_PCON_DSC_ENC_12BPC (0x1 << 3) + +#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B + +/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */ +#define DP_PCON_DSC_SLICE_CAP_2 0x09C +# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2) + +/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */ +#define DP_PCON_DSC_BPP_INCR 0x09E +# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0) +# define DP_PCON_DSC_ONE_16TH_BPP 0 +# define DP_PCON_DSC_ONE_8TH_BPP 1 +# define DP_PCON_DSC_ONE_4TH_BPP 2 +# define DP_PCON_DSC_ONE_HALF_BPP 3 +# define DP_PCON_DSC_ONE_BPP 4 + +/* DP Extended DSC Capabilities */ +#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */ +#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 +#define DP_DSC_BRANCH_MAX_LINE_WIDTH 0x0a2 + +/* DFP Capability Extension */ +#define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */ + +/* Link Configuration */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */ +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a +# define DP_LINK_BW_5_4 0x14 /* 1.2 */ +# define DP_LINK_BW_8_1 0x1e /* 1.4 */ +# define DP_LINK_BW_10 0x01 /* 2.0 128b/132b Link Layer */ +# define DP_LINK_BW_13_5 0x04 /* 2.0 128b/132b Link Layer */ +# define DP_LINK_BW_20 0x02 /* 2.0 128b/132b Link Layer */ + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_2_CDS 3 /* 2.0 E11 */ +# define DP_TRAINING_PATTERN_3 3 /* 1.2 */ +# define DP_TRAINING_PATTERN_4 7 /* 1.4 */ +# define DP_TRAINING_PATTERN_MASK 0x3 +# define DP_TRAINING_PATTERN_MASK_1_4 0xf + +/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */ +# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +# define DP_TX_FFE_PRESET_VALUE_MASK (0xf << 0) /* 2.0 128b/132b Link Layer */ + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */ + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) +# define DP_SET_ANSI_128B132B (1 << 1) + +#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */ +/* bitmask as for DP_I2C_SPEED_CAP */ + +#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0) +# define DP_FRAMING_CHANGE_ENABLE (1 << 1) +# define DP_PANEL_SELF_TEST_ENABLE (1 << 7) + +#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */ +#define DP_LINK_QUAL_LANE1_SET 0x10c +#define DP_LINK_QUAL_LANE2_SET 0x10d +#define DP_LINK_QUAL_LANE3_SET 0x10e +# define DP_LINK_QUAL_PATTERN_DISABLE 0 +# define DP_LINK_QUAL_PATTERN_D10_2 1 +# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2 +# define DP_LINK_QUAL_PATTERN_PRBS7 3 +# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_1 5 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_2 6 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_3 7 +/* DP 2.0 UHBR10, UHBR13.5, UHBR20 */ +# define DP_LINK_QUAL_PATTERN_128B132B_TPS1 0x08 +# define DP_LINK_QUAL_PATTERN_128B132B_TPS2 0x10 +# define DP_LINK_QUAL_PATTERN_PRSBS9 0x18 +# define DP_LINK_QUAL_PATTERN_PRSBS11 0x20 +# define DP_LINK_QUAL_PATTERN_PRSBS15 0x28 +# define DP_LINK_QUAL_PATTERN_PRSBS23 0x30 +# define DP_LINK_QUAL_PATTERN_PRSBS31 0x38 +# define DP_LINK_QUAL_PATTERN_CUSTOM 0x40 +# define DP_LINK_QUAL_PATTERN_SQUARE 0x48 + +#define DP_TRAINING_LANE0_1_SET2 0x10f +#define DP_TRAINING_LANE2_3_SET2 0x110 +# define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0) +# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2) +# define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4) +# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6) + +#define DP_MSTM_CTRL 0x111 /* 1.2 */ +# define DP_MST_EN (1 << 0) +# define DP_UP_REQ_EN (1 << 1) +# define DP_UPSTREAM_IS_SRC (1 << 2) + +#define DP_AUDIO_DELAY0 0x112 /* 1.2 */ +#define DP_AUDIO_DELAY1 0x113 +#define DP_AUDIO_DELAY2 0x114 + +#define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */ +# define DP_LINK_RATE_SET_SHIFT 0 +# define DP_LINK_RATE_SET_MASK (7 << 0) + +#define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */ +# define DP_ALPM_ENABLE (1 << 0) +# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_ENABLE (1 << 0) +# define DP_IRQ_HPD_ENABLE (1 << 1) + +#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */ +# define DP_PWR_NOT_NEEDED (1 << 0) + +#define DP_FEC_CONFIGURATION 0x120 /* 1.4 */ +# define DP_FEC_READY (1 << 0) +# define DP_FEC_ERR_COUNT_SEL_MASK (7 << 1) +# define DP_FEC_ERR_COUNT_DIS (0 << 1) +# define DP_FEC_UNCORR_BLK_ERROR_COUNT (1 << 1) +# define DP_FEC_CORR_BLK_ERROR_COUNT (2 << 1) +# define DP_FEC_BIT_ERROR_COUNT (3 << 1) +# define DP_FEC_LANE_SELECT_MASK (3 << 4) +# define DP_FEC_LANE_0_SELECT (0 << 4) +# define DP_FEC_LANE_1_SELECT (1 << 4) +# define DP_FEC_LANE_2_SELECT (2 << 4) +# define DP_FEC_LANE_3_SELECT (3 << 4) + +#define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_VALID (1 << 0) + +#define DP_DSC_ENABLE 0x160 /* DP 1.4 */ +# define DP_DECOMPRESSION_EN (1 << 0) +#define DP_DSC_CONFIGURATION 0x161 /* DP 2.0 */ + +#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ +# define DP_PSR_ENABLE BIT(0) +# define DP_PSR_MAIN_LINK_ACTIVE BIT(1) +# define DP_PSR_CRC_VERIFICATION BIT(2) +# define DP_PSR_FRAME_CAPTURE BIT(3) +# define DP_PSR_SU_REGION_SCANLINE_CAPTURE BIT(4) /* eDP 1.4a */ +# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS BIT(5) /* eDP 1.4a */ +# define DP_PSR_ENABLE_PSR2 BIT(6) /* eDP 1.4a */ + +#define DP_ADAPTER_CTRL 0x1a0 +# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) + +#define DP_BRANCH_DEVICE_CTRL 0x1a1 +# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) + +#define DP_PAYLOAD_ALLOCATE_SET 0x1c0 +#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 +#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2 + +/* Link/Sink Device Status */ +#define DP_SINK_COUNT 0x200 +/* prior to 1.2 bit 7 was reserved mbz */ +# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f)) +# define DP_SINK_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 +# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) +# define DP_AUTOMATED_TEST_REQUEST (1 << 1) +# define DP_CP_IRQ (1 << 2) +# define DP_MCCS_IRQ (1 << 3) +# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */ +# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */ +# define DP_SINK_SPECIFIC_IRQ (1 << 6) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ + DP_LANE_CHANNEL_EQ_DONE | \ + DP_LANE_SYMBOL_LOCKED) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_128B132B_DPRX_EQ_INTERLANE_ALIGN_DONE (1 << 2) /* 2.0 E11 */ +#define DP_128B132B_DPRX_CDS_INTERLANE_ALIGN_DONE (1 << 3) /* 2.0 E11 */ +#define DP_128B132B_LT_FAILED (1 << 4) /* 2.0 E11 */ +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 +# define DP_RECEIVE_PORT_0_STATUS (1 << 0) +# define DP_RECEIVE_PORT_1_STATUS (1 << 1) +# define DP_STREAM_REGENERATION_STATUS (1 << 2) /* 2.0 */ +# define DP_INTRA_HOP_AUX_REPLY_INDICATION (1 << 3) /* 2.0 */ + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +/* DP 2.0 128b/132b Link Layer */ +# define DP_ADJUST_TX_FFE_PRESET_LANE0_MASK (0xf << 0) +# define DP_ADJUST_TX_FFE_PRESET_LANE0_SHIFT 0 +# define DP_ADJUST_TX_FFE_PRESET_LANE1_MASK (0xf << 4) +# define DP_ADJUST_TX_FFE_PRESET_LANE1_SHIFT 4 + +#define DP_ADJUST_REQUEST_POST_CURSOR2 0x20c +# define DP_ADJUST_POST_CURSOR2_LANE0_MASK 0x03 +# define DP_ADJUST_POST_CURSOR2_LANE0_SHIFT 0 +# define DP_ADJUST_POST_CURSOR2_LANE1_MASK 0x0c +# define DP_ADJUST_POST_CURSOR2_LANE1_SHIFT 2 +# define DP_ADJUST_POST_CURSOR2_LANE2_MASK 0x30 +# define DP_ADJUST_POST_CURSOR2_LANE2_SHIFT 4 +# define DP_ADJUST_POST_CURSOR2_LANE3_MASK 0xc0 +# define DP_ADJUST_POST_CURSOR2_LANE3_SHIFT 6 + +#define DP_TEST_REQUEST 0x218 +# define DP_TEST_LINK_TRAINING (1 << 0) +# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1) +# define DP_TEST_LINK_EDID_READ (1 << 2) +# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ +# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */ +# define DP_TEST_LINK_AUDIO_PATTERN (1 << 5) /* DPCD >= 1.2 */ +# define DP_TEST_LINK_AUDIO_DISABLED_VIDEO (1 << 6) /* DPCD >= 1.2 */ + +#define DP_TEST_LINK_RATE 0x219 +# define DP_LINK_RATE_162 (0x6) +# define DP_LINK_RATE_27 (0xa) + +#define DP_TEST_LANE_COUNT 0x220 + +#define DP_TEST_PATTERN 0x221 +# define DP_NO_TEST_PATTERN 0x0 +# define DP_COLOR_RAMP 0x1 +# define DP_BLACK_AND_WHITE_VERTICAL_LINES 0x2 +# define DP_COLOR_SQUARE 0x3 + +#define DP_TEST_H_TOTAL_HI 0x222 +#define DP_TEST_H_TOTAL_LO 0x223 + +#define DP_TEST_V_TOTAL_HI 0x224 +#define DP_TEST_V_TOTAL_LO 0x225 + +#define DP_TEST_H_START_HI 0x226 +#define DP_TEST_H_START_LO 0x227 + +#define DP_TEST_V_START_HI 0x228 +#define DP_TEST_V_START_LO 0x229 + +#define DP_TEST_HSYNC_HI 0x22A +# define DP_TEST_HSYNC_POLARITY (1 << 7) +# define DP_TEST_HSYNC_WIDTH_HI_MASK (127 << 0) +#define DP_TEST_HSYNC_WIDTH_LO 0x22B + +#define DP_TEST_VSYNC_HI 0x22C +# define DP_TEST_VSYNC_POLARITY (1 << 7) +# define DP_TEST_VSYNC_WIDTH_HI_MASK (127 << 0) +#define DP_TEST_VSYNC_WIDTH_LO 0x22D + +#define DP_TEST_H_WIDTH_HI 0x22E +#define DP_TEST_H_WIDTH_LO 0x22F + +#define DP_TEST_V_HEIGHT_HI 0x230 +#define DP_TEST_V_HEIGHT_LO 0x231 + +#define DP_TEST_MISC0 0x232 +# define DP_TEST_SYNC_CLOCK (1 << 0) +# define DP_TEST_COLOR_FORMAT_MASK (3 << 1) +# define DP_TEST_COLOR_FORMAT_SHIFT 1 +# define DP_COLOR_FORMAT_RGB (0 << 1) +# define DP_COLOR_FORMAT_YCbCr422 (1 << 1) +# define DP_COLOR_FORMAT_YCbCr444 (2 << 1) +# define DP_TEST_DYNAMIC_RANGE_VESA (0 << 3) +# define DP_TEST_DYNAMIC_RANGE_CEA (1 << 3) +# define DP_TEST_YCBCR_COEFFICIENTS (1 << 4) +# define DP_YCBCR_COEFFICIENTS_ITU601 (0 << 4) +# define DP_YCBCR_COEFFICIENTS_ITU709 (1 << 4) +# define DP_TEST_BIT_DEPTH_MASK (7 << 5) +# define DP_TEST_BIT_DEPTH_SHIFT 5 +# define DP_TEST_BIT_DEPTH_6 (0 << 5) +# define DP_TEST_BIT_DEPTH_8 (1 << 5) +# define DP_TEST_BIT_DEPTH_10 (2 << 5) +# define DP_TEST_BIT_DEPTH_12 (3 << 5) +# define DP_TEST_BIT_DEPTH_16 (4 << 5) + +#define DP_TEST_MISC1 0x233 +# define DP_TEST_REFRESH_DENOMINATOR (1 << 0) +# define DP_TEST_INTERLACED (1 << 1) + +#define DP_TEST_REFRESH_RATE_NUMERATOR 0x234 + +#define DP_TEST_MISC0 0x232 + +#define DP_TEST_CRC_R_CR 0x240 +#define DP_TEST_CRC_G_Y 0x242 +#define DP_TEST_CRC_B_CB 0x244 + +#define DP_TEST_SINK_MISC 0x246 +# define DP_TEST_CRC_SUPPORTED (1 << 5) +# define DP_TEST_COUNT_MASK 0xf + +#define DP_PHY_TEST_PATTERN 0x248 +# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7 +# define DP_PHY_TEST_PATTERN_NONE 0x0 +# define DP_PHY_TEST_PATTERN_D10_2 0x1 +# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 +# define DP_PHY_TEST_PATTERN_PRBS7 0x3 +# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 +# define DP_PHY_TEST_PATTERN_CP2520 0x5 + +#define DP_PHY_SQUARE_PATTERN 0x249 + +#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A +#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 +#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251 +#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252 +#define DP_TEST_80BIT_CUSTOM_PATTERN_31_24 0x253 +#define DP_TEST_80BIT_CUSTOM_PATTERN_39_32 0x254 +#define DP_TEST_80BIT_CUSTOM_PATTERN_47_40 0x255 +#define DP_TEST_80BIT_CUSTOM_PATTERN_55_48 0x256 +#define DP_TEST_80BIT_CUSTOM_PATTERN_63_56 0x257 +#define DP_TEST_80BIT_CUSTOM_PATTERN_71_64 0x258 +#define DP_TEST_80BIT_CUSTOM_PATTERN_79_72 0x259 + +#define DP_TEST_RESPONSE 0x260 +# define DP_TEST_ACK (1 << 0) +# define DP_TEST_NAK (1 << 1) +# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +#define DP_TEST_EDID_CHECKSUM 0x261 + +#define DP_TEST_SINK 0x270 +# define DP_TEST_SINK_START (1 << 0) +#define DP_TEST_AUDIO_MODE 0x271 +#define DP_TEST_AUDIO_PATTERN_TYPE 0x272 +#define DP_TEST_AUDIO_PERIOD_CH1 0x273 +#define DP_TEST_AUDIO_PERIOD_CH2 0x274 +#define DP_TEST_AUDIO_PERIOD_CH3 0x275 +#define DP_TEST_AUDIO_PERIOD_CH4 0x276 +#define DP_TEST_AUDIO_PERIOD_CH5 0x277 +#define DP_TEST_AUDIO_PERIOD_CH6 0x278 +#define DP_TEST_AUDIO_PERIOD_CH7 0x279 +#define DP_TEST_AUDIO_PERIOD_CH8 0x27A + +#define DP_FEC_STATUS 0x280 /* 1.4 */ +# define DP_FEC_DECODE_EN_DETECTED (1 << 0) +# define DP_FEC_DECODE_DIS_DETECTED (1 << 1) + +#define DP_FEC_ERROR_COUNT_LSB 0x0281 /* 1.4 */ + +#define DP_FEC_ERROR_COUNT_MSB 0x0282 /* 1.4 */ +# define DP_FEC_ERROR_COUNT_MASK 0x7F +# define DP_FEC_ERR_COUNT_VALID (1 << 7) + +#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ +# define DP_PAYLOAD_TABLE_UPDATED (1 << 0) +# define DP_PAYLOAD_ACT_HANDLED (1 << 1) + +#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */ +/* up to ID_SLOT_63 at 0x2ff */ + +/* Source Device-specific */ +#define DP_SOURCE_OUI 0x300 + +/* Sink Device-specific */ +#define DP_SINK_OUI 0x400 + +/* Branch Device-specific */ +#define DP_BRANCH_OUI 0x500 +#define DP_BRANCH_ID 0x503 +#define DP_BRANCH_REVISION_START 0x509 +#define DP_BRANCH_HW_REV 0x509 +#define DP_BRANCH_SW_REV 0x50A + +/* Link/Sink Device Power Control */ +#define DP_SET_POWER 0x600 +# define DP_SET_POWER_D0 0x1 +# define DP_SET_POWER_D3 0x2 +# define DP_SET_POWER_MASK 0x3 +# define DP_SET_POWER_D3_AUX_ON 0x5 + +/* eDP-specific */ +#define DP_EDP_DPCD_REV 0x700 /* eDP 1.2 */ +# define DP_EDP_11 0x00 +# define DP_EDP_12 0x01 +# define DP_EDP_13 0x02 +# define DP_EDP_14 0x03 +# define DP_EDP_14a 0x04 /* eDP 1.4a */ +# define DP_EDP_14b 0x05 /* eDP 1.4b */ + +#define DP_EDP_GENERAL_CAP_1 0x701 +# define DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP (1 << 0) +# define DP_EDP_BACKLIGHT_PIN_ENABLE_CAP (1 << 1) +# define DP_EDP_BACKLIGHT_AUX_ENABLE_CAP (1 << 2) +# define DP_EDP_PANEL_SELF_TEST_PIN_ENABLE_CAP (1 << 3) +# define DP_EDP_PANEL_SELF_TEST_AUX_ENABLE_CAP (1 << 4) +# define DP_EDP_FRC_ENABLE_CAP (1 << 5) +# define DP_EDP_COLOR_ENGINE_CAP (1 << 6) +# define DP_EDP_SET_POWER_CAP (1 << 7) + +#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP 0x702 +# define DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP (1 << 0) +# define DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP (1 << 1) +# define DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT (1 << 2) +# define DP_EDP_BACKLIGHT_AUX_PWM_PRODUCT_CAP (1 << 3) +# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_CAP (1 << 4) +# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP (1 << 5) +# define DP_EDP_DYNAMIC_BACKLIGHT_CAP (1 << 6) +# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_CAP (1 << 7) + +#define DP_EDP_GENERAL_CAP_2 0x703 +# define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0) + +#define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ +# define DP_EDP_X_REGION_CAP_MASK (0xf << 0) +# define DP_EDP_X_REGION_CAP_SHIFT 0 +# define DP_EDP_Y_REGION_CAP_MASK (0xf << 4) +# define DP_EDP_Y_REGION_CAP_SHIFT 4 + +#define DP_EDP_DISPLAY_CONTROL_REGISTER 0x720 +# define DP_EDP_BACKLIGHT_ENABLE (1 << 0) +# define DP_EDP_BLACK_VIDEO_ENABLE (1 << 1) +# define DP_EDP_FRC_ENABLE (1 << 2) +# define DP_EDP_COLOR_ENGINE_ENABLE (1 << 3) +# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_ENABLE (1 << 7) + +#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER 0x721 +# define DP_EDP_BACKLIGHT_CONTROL_MODE_MASK (3 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PWM (0 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET (1 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD (2 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT (3 << 0) +# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_ENABLE (1 << 2) +# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE (1 << 3) +# define DP_EDP_DYNAMIC_BACKLIGHT_ENABLE (1 << 4) +# define DP_EDP_REGIONAL_BACKLIGHT_ENABLE (1 << 5) +# define DP_EDP_UPDATE_REGION_BRIGHTNESS (1 << 6) /* eDP 1.4 */ + +#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB 0x722 +#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB 0x723 + +#define DP_EDP_PWMGEN_BIT_COUNT 0x724 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726 +# define DP_EDP_PWMGEN_BIT_COUNT_MASK (0x1f << 0) + +#define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727 + +#define DP_EDP_BACKLIGHT_FREQ_SET 0x728 +# define DP_EDP_BACKLIGHT_FREQ_BASE_KHZ 27000 + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB 0x72c + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB 0x72d +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID 0x72e +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB 0x72f + +#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET 0x732 +#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET 0x733 + +#define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */ +#define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */ + +#define DP_EDP_MSO_LINK_CAPABILITIES 0x7a4 /* eDP 1.4 */ +# define DP_EDP_MSO_NUMBER_OF_LINKS_MASK (7 << 0) +# define DP_EDP_MSO_NUMBER_OF_LINKS_SHIFT 0 +# define DP_EDP_MSO_INDEPENDENT_LINK_BIT (1 << 3) + +/* Sideband MSG Buffers */ +#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */ + +/* DPRX Event Status Indicator */ +#define DP_SINK_COUNT_ESI 0x2002 /* same as 0x200 */ +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* same as 0x201 */ + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ +# define DP_RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0) +# define DP_LOCK_ACQUISITION_REQUEST (1 << 1) +# define DP_CEC_IRQ (1 << 2) + +#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ +# define RX_CAP_CHANGED (1 << 0) +# define LINK_STATUS_CHANGED (1 << 1) +# define STREAM_STATUS_CHANGED (1 << 2) +# define HDMI_LINK_STATUS_CHANGED (1 << 3) +# define CONNECTED_OFF_ENTRY_REQUESTED (1 << 4) + +#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) +# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */ + +#define DP_PSR_ESI 0x2007 /* XXX 1.2? */ +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */ +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + +#define DP_SYNCHRONIZATION_LATENCY_IN_SINK 0x2009 /* edp 1.4 */ +# define DP_MAX_RESYNC_FRAME_COUNT_MASK (0xf << 0) +# define DP_MAX_RESYNC_FRAME_COUNT_SHIFT 0 +# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_MASK (0xf << 4) +# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_SHIFT 4 + +#define DP_LAST_RECEIVED_PSR_SDP 0x200a /* eDP 1.2 */ +# define DP_PSR_STATE_BIT (1 << 0) /* eDP 1.2 */ +# define DP_UPDATE_RFB_BIT (1 << 1) /* eDP 1.2 */ +# define DP_CRC_VALID_BIT (1 << 2) /* eDP 1.2 */ +# define DP_SU_VALID (1 << 3) /* eDP 1.4 */ +# define DP_FIRST_SCAN_LINE_SU_REGION (1 << 4) /* eDP 1.4 */ +# define DP_LAST_SCAN_LINE_SU_REGION (1 << 5) /* eDP 1.4 */ +# define DP_Y_COORDINATE_VALID (1 << 6) /* eDP 1.4a */ + +#define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */ +# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) + +#define DP_LANE0_1_STATUS_ESI 0x200c /* status same as 0x202 */ +#define DP_LANE2_3_STATUS_ESI 0x200d /* status same as 0x203 */ +#define DP_LANE_ALIGN_STATUS_UPDATED_ESI 0x200e /* status same as 0x204 */ +#define DP_SINK_STATUS_ESI 0x200f /* status same as 0x205 */ + +/* Extended Receiver Capability: See DP_DPCD_REV for definitions */ +#define DP_DP13_DPCD_REV 0x2200 + +#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */ +# define DP_GTC_CAP (1 << 0) /* DP 1.3 */ +# define DP_SST_SPLIT_SDP_CAP (1 << 1) /* DP 1.4 */ +# define DP_AV_SYNC_CAP (1 << 2) /* DP 1.3 */ +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) /* DP 1.3 */ +# define DP_VSC_EXT_VESA_SDP_SUPPORTED (1 << 4) /* DP 1.4 */ +# define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED (1 << 5) /* DP 1.4 */ +# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ +# define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ + +#define DP_128B132B_SUPPORTED_LINK_RATES 0x2215 /* 2.0 */ +# define DP_UHBR10 (1 << 0) +# define DP_UHBR20 (1 << 1) +# define DP_UHBR13_5 (1 << 2) + +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL 0x2216 /* 2.0 */ +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_1MS_UNIT (1 << 7) +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_MASK 0x7f +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_400_US 0x00 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_4_MS 0x01 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_8_MS 0x02 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_12_MS 0x03 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_16_MS 0x04 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_32_MS 0x05 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_64_MS 0x06 + +#define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0x2230 +#define DP_TEST_264BIT_CUSTOM_PATTERN_263_256 0x2250 + +/* DSC Extended Capability Branch Total DSC Resources */ +#define DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT 0x2260 /* 2.0 */ +# define DP_DSC_DECODER_COUNT_MASK (0b111 << 5) +# define DP_DSC_DECODER_COUNT_SHIFT 5 +#define DP_DSC_MAX_SLICE_COUNT_AND_AGGREGATION_0 0x2270 /* 2.0 */ +# define DP_DSC_DECODER_0_MAXIMUM_SLICE_COUNT_MASK (1 << 0) +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_MASK (0b111 << 1) +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_SHIFT 1 + +/* Protocol Converter Extension */ +/* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */ +#define DP_CEC_TUNNELING_CAPABILITY 0x3000 +# define DP_CEC_TUNNELING_CAPABLE (1 << 0) +# define DP_CEC_SNOOPING_CAPABLE (1 << 1) +# define DP_CEC_MULTIPLE_LA_CAPABLE (1 << 2) + +#define DP_CEC_TUNNELING_CONTROL 0x3001 +# define DP_CEC_TUNNELING_ENABLE (1 << 0) +# define DP_CEC_SNOOPING_ENABLE (1 << 1) + +#define DP_CEC_RX_MESSAGE_INFO 0x3002 +# define DP_CEC_RX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_RX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_RX_MESSAGE_HPD_STATE (1 << 4) +# define DP_CEC_RX_MESSAGE_HPD_LOST (1 << 5) +# define DP_CEC_RX_MESSAGE_ACKED (1 << 6) +# define DP_CEC_RX_MESSAGE_ENDED (1 << 7) + +#define DP_CEC_TX_MESSAGE_INFO 0x3003 +# define DP_CEC_TX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_TX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_TX_RETRY_COUNT_MASK (0x7 << 4) +# define DP_CEC_TX_RETRY_COUNT_SHIFT 4 +# define DP_CEC_TX_MESSAGE_SEND (1 << 7) + +#define DP_CEC_TUNNELING_IRQ_FLAGS 0x3004 +# define DP_CEC_RX_MESSAGE_INFO_VALID (1 << 0) +# define DP_CEC_RX_MESSAGE_OVERFLOW (1 << 1) +# define DP_CEC_TX_MESSAGE_SENT (1 << 4) +# define DP_CEC_TX_LINE_ERROR (1 << 5) +# define DP_CEC_TX_ADDRESS_NACK_ERROR (1 << 6) +# define DP_CEC_TX_DATA_NACK_ERROR (1 << 7) + +#define DP_CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */ +# define DP_CEC_LOGICAL_ADDRESS_0 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_1 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_2 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_3 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_4 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_5 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_6 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_7 (1 << 7) +#define DP_CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */ +# define DP_CEC_LOGICAL_ADDRESS_8 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_9 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_10 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_11 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_12 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_13 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_14 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_15 (1 << 7) + +#define DP_CEC_RX_MESSAGE_BUFFER 0x3010 +#define DP_CEC_TX_MESSAGE_BUFFER 0x3020 +#define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10 + +/* PCON CONFIGURE-1 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_1 0x305A +# define DP_PCON_ENABLE_MAX_FRL_BW (7 << 0) +# define DP_PCON_ENABLE_MAX_BW_0GBPS 0 +# define DP_PCON_ENABLE_MAX_BW_9GBPS 1 +# define DP_PCON_ENABLE_MAX_BW_18GBPS 2 +# define DP_PCON_ENABLE_MAX_BW_24GBPS 3 +# define DP_PCON_ENABLE_MAX_BW_32GBPS 4 +# define DP_PCON_ENABLE_MAX_BW_40GBPS 5 +# define DP_PCON_ENABLE_MAX_BW_48GBPS 6 +# define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) +# define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_SEQUENTIAL_LINK (0 << 4) +# define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) +# define DP_PCON_ENABLE_HPD_READY (1 << 6) +# define DP_PCON_ENABLE_HDMI_LINK (1 << 7) + +/* PCON CONFIGURE-2 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_2 0x305B +# define DP_PCON_MAX_LINK_BW_MASK (0x3F << 0) +# define DP_PCON_FRL_BW_MASK_9GBPS (1 << 0) +# define DP_PCON_FRL_BW_MASK_18GBPS (1 << 1) +# define DP_PCON_FRL_BW_MASK_24GBPS (1 << 2) +# define DP_PCON_FRL_BW_MASK_32GBPS (1 << 3) +# define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) +# define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) +# define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) +# define DP_PCON_FRL_LINK_TRAIN_NORMAL (0 << 6) + +/* PCON HDMI LINK STATUS */ +#define DP_PCON_HDMI_TX_LINK_STATUS 0x303B +# define DP_PCON_HDMI_TX_LINK_ACTIVE (1 << 0) +# define DP_PCON_FRL_READY (1 << 1) + +/* PCON HDMI POST FRL STATUS */ +#define DP_PCON_HDMI_POST_FRL_STATUS 0x3036 +# define DP_PCON_HDMI_LINK_MODE (1 << 0) +# define DP_PCON_HDMI_MODE_TMDS 0 +# define DP_PCON_HDMI_MODE_FRL 1 +# define DP_PCON_HDMI_FRL_TRAINED_BW (0x3F << 1) +# define DP_PCON_FRL_TRAINED_BW_9GBPS (1 << 1) +# define DP_PCON_FRL_TRAINED_BW_18GBPS (1 << 2) +# define DP_PCON_FRL_TRAINED_BW_24GBPS (1 << 3) +# define DP_PCON_FRL_TRAINED_BW_32GBPS (1 << 4) +# define DP_PCON_FRL_TRAINED_BW_40GBPS (1 << 5) +# define DP_PCON_FRL_TRAINED_BW_48GBPS (1 << 6) + +#define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */ +# define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */ +#define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */ +# define DP_CONVERSION_TO_YCBCR420_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_HDMI_EDID_PROCESSING_DISABLE (1 << 1) /* DP 1.4 */ +# define DP_HDMI_AUTONOMOUS_SCRAMBLING_DISABLE (1 << 2) /* DP 1.4 */ +# define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */ +#define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */ +# define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1) +# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2) +# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2 +# define DP_CONVERSION_RGB_YCBCR_MASK (7 << 4) +# define DP_CONVERSION_BT601_RGB_YCBCR_ENABLE (1 << 4) +# define DP_CONVERSION_BT709_RGB_YCBCR_ENABLE (1 << 5) +# define DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE (1 << 6) + +/* PCON Downstream HDMI ERROR Status per Lane */ +#define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 +#define DP_PCON_HDMI_ERROR_STATUS_LN1 0x3038 +#define DP_PCON_HDMI_ERROR_STATUS_LN2 0x3039 +#define DP_PCON_HDMI_ERROR_STATUS_LN3 0x303A +# define DP_PCON_HDMI_ERROR_COUNT_MASK (0x7 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS (1 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1) +# define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2) + +/* PCON HDMI CONFIG PPS Override Buffer + * Valid Offsets to be added to Base : 0-127 + */ +#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice height + * Offset-0 8LSBs of the Slice height. + * Offset-1 8MSBs of the Slice height. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice width + * Offset-0 8LSBs of the Slice width. + * Offset-1 8MSBs of the Slice width. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182 + +/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel + * Offset-0 8LSBs of the bits_per_pixel. + * Offset-1 2MSBs of the bits_per_pixel. + */ +#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184 + +/* HDCP 1.3 and HDCP 2.2 */ +#define DP_AUX_HDCP_BKSV 0x68000 +#define DP_AUX_HDCP_RI_PRIME 0x68005 +#define DP_AUX_HDCP_AKSV 0x68007 +#define DP_AUX_HDCP_AN 0x6800C +#define DP_AUX_HDCP_V_PRIME(h) (0x68014 + h * 4) +#define DP_AUX_HDCP_BCAPS 0x68028 +# define DP_BCAPS_REPEATER_PRESENT BIT(1) +# define DP_BCAPS_HDCP_CAPABLE BIT(0) +#define DP_AUX_HDCP_BSTATUS 0x68029 +# define DP_BSTATUS_REAUTH_REQ BIT(3) +# define DP_BSTATUS_LINK_FAILURE BIT(2) +# define DP_BSTATUS_R0_PRIME_READY BIT(1) +# define DP_BSTATUS_READY BIT(0) +#define DP_AUX_HDCP_BINFO 0x6802A +#define DP_AUX_HDCP_KSV_FIFO 0x6802C +#define DP_AUX_HDCP_AINFO 0x6803B + +/* DP HDCP2.2 parameter offsets in DPCD address space */ +#define DP_HDCP_2_2_REG_RTX_OFFSET 0x69000 +#define DP_HDCP_2_2_REG_TXCAPS_OFFSET 0x69008 +#define DP_HDCP_2_2_REG_CERT_RX_OFFSET 0x6900B +#define DP_HDCP_2_2_REG_RRX_OFFSET 0x69215 +#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET 0x6921D +#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET 0x69220 +#define DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET 0x692A0 +#define DP_HDCP_2_2_REG_M_OFFSET 0x692B0 +#define DP_HDCP_2_2_REG_HPRIME_OFFSET 0x692C0 +#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET 0x692E0 +#define DP_HDCP_2_2_REG_RN_OFFSET 0x692F0 +#define DP_HDCP_2_2_REG_LPRIME_OFFSET 0x692F8 +#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET 0x69318 +#define DP_HDCP_2_2_REG_RIV_OFFSET 0x69328 +#define DP_HDCP_2_2_REG_RXINFO_OFFSET 0x69330 +#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET 0x69332 +#define DP_HDCP_2_2_REG_VPRIME_OFFSET 0x69335 +#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET 0x69345 +#define DP_HDCP_2_2_REG_V_OFFSET 0x693E0 +#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET 0x693F0 +#define DP_HDCP_2_2_REG_K_OFFSET 0x693F3 +#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET 0x693F5 +#define DP_HDCP_2_2_REG_MPRIME_OFFSET 0x69473 +#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET 0x69493 +#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494 +#define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518 + +/* LTTPR: Link Training (LT)-tunable PHY Repeaters */ +#define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 /* 1.3 */ +#define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 /* 1.4a */ +#define DP_PHY_REPEATER_CNT 0xf0002 /* 1.3 */ +#define DP_PHY_REPEATER_MODE 0xf0003 /* 1.3 */ +#define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 /* 1.4a */ +#define DP_Repeater_FEC_CAPABILITY 0xf0004 /* 1.4 */ +#define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 /* 1.4a */ +#define DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER 0xf0006 /* 2.0 */ +# define DP_PHY_REPEATER_128B132B_SUPPORTED (1 << 0) +/* See DP_128B132B_SUPPORTED_LINK_RATES for values */ +#define DP_PHY_REPEATER_128B132B_RATES 0xf0007 /* 2.0 */ +#define DP_PHY_REPEATER_EQ_DONE 0xf0008 /* 2.0 E11 */ + +enum drm_dp_phy { + DP_PHY_DPRX, + + DP_PHY_LTTPR1, + DP_PHY_LTTPR2, + DP_PHY_LTTPR3, + DP_PHY_LTTPR4, + DP_PHY_LTTPR5, + DP_PHY_LTTPR6, + DP_PHY_LTTPR7, + DP_PHY_LTTPR8, + + DP_MAX_LTTPR_COUNT = DP_PHY_LTTPR8, +}; + +#define DP_PHY_LTTPR(i) (DP_PHY_LTTPR1 + (i)) + +#define __DP_LTTPR1_BASE 0xf0010 /* 1.3 */ +#define __DP_LTTPR2_BASE 0xf0060 /* 1.3 */ +#define DP_LTTPR_BASE(dp_phy) \ + (__DP_LTTPR1_BASE + (__DP_LTTPR2_BASE - __DP_LTTPR1_BASE) * \ + ((dp_phy) - DP_PHY_LTTPR1)) + +#define DP_LTTPR_REG(dp_phy, lttpr1_reg) \ + (DP_LTTPR_BASE(dp_phy) - DP_LTTPR_BASE(DP_PHY_LTTPR1) + (lttpr1_reg)) + +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 /* 1.3 */ +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_PATTERN_SET_PHY_REPEATER1) + +#define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 /* 1.3 */ +#define DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_LANE0_SET_PHY_REPEATER1) + +#define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 /* 1.3 */ +#define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 /* 1.3 */ +#define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 /* 1.3 */ +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 /* 1.4a */ +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1) + +#define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 /* 1.4a */ +# define DP_VOLTAGE_SWING_LEVEL_3_SUPPORTED BIT(0) +# define DP_PRE_EMPHASIS_LEVEL_3_SUPPORTED BIT(1) + +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0022 /* 2.0 */ +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1) +/* see DP_128B132B_TRAINING_AUX_RD_INTERVAL for values */ + +#define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 /* 1.3 */ +#define DP_LANE0_1_STATUS_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_LANE0_1_STATUS_PHY_REPEATER1) + +#define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 /* 1.3 */ + +#define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 /* 1.3 */ +#define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 /* 1.3 */ +#define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b /* 1.3 */ + +#define __DP_FEC1_BASE 0xf0290 /* 1.4 */ +#define __DP_FEC2_BASE 0xf0298 /* 1.4 */ +#define DP_FEC_BASE(dp_phy) \ + (__DP_FEC1_BASE + ((__DP_FEC2_BASE - __DP_FEC1_BASE) * \ + ((dp_phy) - DP_PHY_LTTPR1))) + +#define DP_FEC_REG(dp_phy, fec1_reg) \ + (DP_FEC_BASE(dp_phy) - DP_FEC_BASE(DP_PHY_LTTPR1) + fec1_reg) + +#define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 /* 1.4 */ +#define DP_FEC_STATUS_PHY_REPEATER(dp_phy) \ + DP_FEC_REG(dp_phy, DP_FEC_STATUS_PHY_REPEATER1) + +#define DP_FEC_ERROR_COUNT_PHY_REPEATER1 0xf0291 /* 1.4 */ +#define DP_FEC_CAPABILITY_PHY_REPEATER1 0xf0294 /* 1.4a */ + +#define DP_LTTPR_MAX_ADD 0xf02ff /* 1.4 */ + +#define DP_DPCD_MAX_ADD 0xfffff /* 1.4 */ + +/* Repeater modes */ +#define DP_PHY_REPEATER_MODE_TRANSPARENT 0x55 /* 1.3 */ +#define DP_PHY_REPEATER_MODE_NON_TRANSPARENT 0xaa /* 1.3 */ + +/* DP HDCP message start offsets in DPCD address space */ +#define DP_HDCP_2_2_AKE_INIT_OFFSET DP_HDCP_2_2_REG_RTX_OFFSET +#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET DP_HDCP_2_2_REG_CERT_RX_OFFSET +#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKPUB_KM_OFFSET +#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET +#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET DP_HDCP_2_2_REG_HPRIME_OFFSET +#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \ + DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET +#define DP_HDCP_2_2_LC_INIT_OFFSET DP_HDCP_2_2_REG_RN_OFFSET +#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET DP_HDCP_2_2_REG_LPRIME_OFFSET +#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET DP_HDCP_2_2_REG_EDKEY_KS_OFFSET +#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_RXINFO_OFFSET +#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET DP_HDCP_2_2_REG_V_OFFSET +#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET +#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET DP_HDCP_2_2_REG_MPRIME_OFFSET + +#define HDCP_2_2_DP_RXSTATUS_LEN 1 +#define HDCP_2_2_DP_RXSTATUS_READY(x) ((x) & BIT(0)) +#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x) ((x) & BIT(1)) +#define HDCP_2_2_DP_RXSTATUS_PAIRING(x) ((x) & BIT(2)) +#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3)) +#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x) ((x) & BIT(4)) + +/* DP 1.2 Sideband message defines */ +/* peer device type - DP 1.2a Table 2-92 */ +#define DP_PEER_DEVICE_NONE 0x0 +#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1 +#define DP_PEER_DEVICE_MST_BRANCHING 0x2 +#define DP_PEER_DEVICE_SST_SINK 0x3 +#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 + +/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ +#define DP_GET_MSG_TRANSACTION_VERSION 0x00 /* DP 1.3 */ +#define DP_LINK_ADDRESS 0x01 +#define DP_CONNECTION_STATUS_NOTIFY 0x02 +#define DP_ENUM_PATH_RESOURCES 0x10 +#define DP_ALLOCATE_PAYLOAD 0x11 +#define DP_QUERY_PAYLOAD 0x12 +#define DP_RESOURCE_STATUS_NOTIFY 0x13 +#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14 +#define DP_REMOTE_DPCD_READ 0x20 +#define DP_REMOTE_DPCD_WRITE 0x21 +#define DP_REMOTE_I2C_READ 0x22 +#define DP_REMOTE_I2C_WRITE 0x23 +#define DP_POWER_UP_PHY 0x24 +#define DP_POWER_DOWN_PHY 0x25 +#define DP_SINK_EVENT_NOTIFY 0x30 +#define DP_QUERY_STREAM_ENC_STATUS 0x38 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_NO_EXIST 0 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_INACTIVE 1 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_ACTIVE 2 + +/* DP 1.2 MST sideband reply types */ +#define DP_SIDEBAND_REPLY_ACK 0x00 +#define DP_SIDEBAND_REPLY_NAK 0x01 + +/* DP 1.2 MST sideband nak reasons - table 2.84 */ +#define DP_NAK_WRITE_FAILURE 0x01 +#define DP_NAK_INVALID_READ 0x02 +#define DP_NAK_CRC_FAILURE 0x03 +#define DP_NAK_BAD_PARAM 0x04 +#define DP_NAK_DEFER 0x05 +#define DP_NAK_LINK_FAILURE 0x06 +#define DP_NAK_NO_RESOURCES 0x07 +#define DP_NAK_DPCD_FAIL 0x08 +#define DP_NAK_I2C_NAK 0x09 +#define DP_NAK_ALLOCATE_FAIL 0x0a + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +/* DP 1.2 MST PORTs - Section 2.5.1 v1.2a spec */ +#define DP_MST_PHYSICAL_PORT_0 0 +#define DP_MST_LOGICAL_PORT_0 8 + +#define DP_LINK_CONSTANT_N_VALUE 0x8000 +#define DP_LINK_STATUS_SIZE 6 +bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); + +#define DP_BRANCH_OUI_HEADER_SIZE 0xc +#define DP_RECEIVER_CAP_SIZE 0xf +#define DP_DSC_RECEIVER_CAP_SIZE 0xf +#define EDP_PSR_RECEIVER_CAP_SIZE 2 +#define EDP_DISPLAY_CTL_CAP_SIZE 3 +#define DP_LTTPR_COMMON_CAP_SIZE 8 +#define DP_LTTPR_PHY_CAP_SIZE 3 + +int drm_dp_read_clock_recovery_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); +int drm_dp_read_channel_eq_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); + +void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_clock_recovery_delay(void); +void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +int drm_dp_128b132b_read_aux_rd_interval(struct drm_dp_aux *aux); +bool drm_dp_128b132b_lane_channel_eq_done(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_lane_symbol_locked(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_eq_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_cds_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_link_training_failed(const u8 link_status[DP_LINK_STATUS_SIZE]); + +u8 drm_dp_link_rate_to_bw_code(int link_rate); +int drm_dp_bw_code_to_link_rate(u8 link_bw); + +#define DP_SDP_AUDIO_TIMESTAMP 0x01 +#define DP_SDP_AUDIO_STREAM 0x02 +#define DP_SDP_EXTENSION 0x04 /* DP 1.1 */ +#define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 /* DP 1.2 */ +#define DP_SDP_ISRC 0x06 /* DP 1.2 */ +#define DP_SDP_VSC 0x07 /* DP 1.2 */ +#define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0-7, DP 1.3 */ +#define DP_SDP_PPS 0x10 /* DP 1.4 */ +#define DP_SDP_VSC_EXT_VESA 0x20 /* DP 1.4 */ +#define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ +/* 0x80+ CEA-861 infoframe types */ + +/** + * struct dp_sdp_header - DP secondary data packet header + * @HB0: Secondary Data Packet ID + * @HB1: Secondary Data Packet Type + * @HB2: Secondary Data Packet Specific header, Byte 0 + * @HB3: Secondary Data packet Specific header, Byte 1 + */ +struct dp_sdp_header { + u8 HB0; + u8 HB1; + u8 HB2; + u8 HB3; +} __packed; + +#define EDP_SDP_HEADER_REVISION_MASK 0x1F +#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F +#define DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 0x7F + +/** + * struct dp_sdp - DP secondary data packet + * @sdp_header: DP secondary data packet header + * @db: DP secondaray data packet data blocks + * VSC SDP Payload for PSR + * db[0]: Stereo Interface + * db[1]: 0 - PSR State; 1 - Update RFB; 2 - CRC Valid + * db[2]: CRC value bits 7:0 of the R or Cr component + * db[3]: CRC value bits 15:8 of the R or Cr component + * db[4]: CRC value bits 7:0 of the G or Y component + * db[5]: CRC value bits 15:8 of the G or Y component + * db[6]: CRC value bits 7:0 of the B or Cb component + * db[7]: CRC value bits 15:8 of the B or Cb component + * db[8] - db[31]: Reserved + * VSC SDP Payload for Pixel Encoding/Colorimetry Format + * db[0] - db[15]: Reserved + * db[16]: Pixel Encoding and Colorimetry Formats + * db[17]: Dynamic Range and Component Bit Depth + * db[18]: Content Type + * db[19] - db[31]: Reserved + */ +struct dp_sdp { + struct dp_sdp_header sdp_header; + u8 db[32]; +} __packed; + +#define EDP_VSC_PSR_STATE_ACTIVE (1<<0) +#define EDP_VSC_PSR_UPDATE_RFB (1<<1) +#define EDP_VSC_PSR_CRC_VALUES_VALID (1<<2) + +/** + * enum dp_pixelformat - drm DP Pixel encoding formats + * + * This enum is used to indicate DP VSC SDP Pixel encoding formats. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * + * @DP_PIXELFORMAT_RGB: RGB pixel encoding format + * @DP_PIXELFORMAT_YUV444: YCbCr 4:4:4 pixel encoding format + * @DP_PIXELFORMAT_YUV422: YCbCr 4:2:2 pixel encoding format + * @DP_PIXELFORMAT_YUV420: YCbCr 4:2:0 pixel encoding format + * @DP_PIXELFORMAT_Y_ONLY: Y Only pixel encoding format + * @DP_PIXELFORMAT_RAW: RAW pixel encoding format + * @DP_PIXELFORMAT_RESERVED: Reserved pixel encoding format + */ +enum dp_pixelformat { + DP_PIXELFORMAT_RGB = 0, + DP_PIXELFORMAT_YUV444 = 0x1, + DP_PIXELFORMAT_YUV422 = 0x2, + DP_PIXELFORMAT_YUV420 = 0x3, + DP_PIXELFORMAT_Y_ONLY = 0x4, + DP_PIXELFORMAT_RAW = 0x5, + DP_PIXELFORMAT_RESERVED = 0x6, +}; + +/** + * enum dp_colorimetry - drm DP Colorimetry formats + * + * This enum is used to indicate DP VSC SDP Colorimetry formats. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] and a name of enum member follows DRM_MODE_COLORIMETRY definition. + * + * @DP_COLORIMETRY_DEFAULT: sRGB (IEC 61966-2-1) or + * ITU-R BT.601 colorimetry format + * @DP_COLORIMETRY_RGB_WIDE_FIXED: RGB wide gamut fixed point colorimetry format + * @DP_COLORIMETRY_BT709_YCC: ITU-R BT.709 colorimetry format + * @DP_COLORIMETRY_RGB_WIDE_FLOAT: RGB wide gamut floating point + * (scRGB (IEC 61966-2-2)) colorimetry format + * @DP_COLORIMETRY_XVYCC_601: xvYCC601 colorimetry format + * @DP_COLORIMETRY_OPRGB: OpRGB colorimetry format + * @DP_COLORIMETRY_XVYCC_709: xvYCC709 colorimetry format + * @DP_COLORIMETRY_DCI_P3_RGB: DCI-P3 (SMPTE RP 431-2) colorimetry format + * @DP_COLORIMETRY_SYCC_601: sYCC601 colorimetry format + * @DP_COLORIMETRY_RGB_CUSTOM: RGB Custom Color Profile colorimetry format + * @DP_COLORIMETRY_OPYCC_601: opYCC601 colorimetry format + * @DP_COLORIMETRY_BT2020_RGB: ITU-R BT.2020 R' G' B' colorimetry format + * @DP_COLORIMETRY_BT2020_CYCC: ITU-R BT.2020 Y'c C'bc C'rc colorimetry format + * @DP_COLORIMETRY_BT2020_YCC: ITU-R BT.2020 Y' C'b C'r colorimetry format + */ +enum dp_colorimetry { + DP_COLORIMETRY_DEFAULT = 0, + DP_COLORIMETRY_RGB_WIDE_FIXED = 0x1, + DP_COLORIMETRY_BT709_YCC = 0x1, + DP_COLORIMETRY_RGB_WIDE_FLOAT = 0x2, + DP_COLORIMETRY_XVYCC_601 = 0x2, + DP_COLORIMETRY_OPRGB = 0x3, + DP_COLORIMETRY_XVYCC_709 = 0x3, + DP_COLORIMETRY_DCI_P3_RGB = 0x4, + DP_COLORIMETRY_SYCC_601 = 0x4, + DP_COLORIMETRY_RGB_CUSTOM = 0x5, + DP_COLORIMETRY_OPYCC_601 = 0x5, + DP_COLORIMETRY_BT2020_RGB = 0x6, + DP_COLORIMETRY_BT2020_CYCC = 0x6, + DP_COLORIMETRY_BT2020_YCC = 0x7, +}; + +/** + * enum dp_dynamic_range - drm DP Dynamic Range + * + * This enum is used to indicate DP VSC SDP Dynamic Range. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * + * @DP_DYNAMIC_RANGE_VESA: VESA range + * @DP_DYNAMIC_RANGE_CTA: CTA range + */ +enum dp_dynamic_range { + DP_DYNAMIC_RANGE_VESA = 0, + DP_DYNAMIC_RANGE_CTA = 1, +}; + +/** + * enum dp_content_type - drm DP Content Type + * + * This enum is used to indicate DP VSC SDP Content Types. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * CTA-861-G defines content types and expected processing by a sink device + * + * @DP_CONTENT_TYPE_NOT_DEFINED: Not defined type + * @DP_CONTENT_TYPE_GRAPHICS: Graphics type + * @DP_CONTENT_TYPE_PHOTO: Photo type + * @DP_CONTENT_TYPE_VIDEO: Video type + * @DP_CONTENT_TYPE_GAME: Game type + */ +enum dp_content_type { + DP_CONTENT_TYPE_NOT_DEFINED = 0x00, + DP_CONTENT_TYPE_GRAPHICS = 0x01, + DP_CONTENT_TYPE_PHOTO = 0x02, + DP_CONTENT_TYPE_VIDEO = 0x03, + DP_CONTENT_TYPE_GAME = 0x04, +}; + +/** + * struct drm_dp_vsc_sdp - drm DP VSC SDP + * + * This structure represents a DP VSC SDP of drm + * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and + * [Table 2-117: VSC SDP Payload for DB16 through DB18] + * + * @sdp_type: secondary-data packet type + * @revision: revision number + * @length: number of valid data bytes + * @pixelformat: pixel encoding format + * @colorimetry: colorimetry format + * @bpc: bit per color + * @dynamic_range: dynamic range information + * @content_type: CTA-861-G defines content types and expected processing by a sink device + */ +struct drm_dp_vsc_sdp { + unsigned char sdp_type; + unsigned char revision; + unsigned char length; + enum dp_pixelformat pixelformat; + enum dp_colorimetry colorimetry; + int bpc; + enum dp_dynamic_range dynamic_range; + enum dp_content_type content_type; +}; + +void drm_dp_vsc_sdp_log(const char *level, struct device *dev, + const struct drm_dp_vsc_sdp *vsc); + +int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); + +static inline int +drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]); +} + +static inline u8 +drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK; +} + +static inline bool +drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP); +} + +static inline bool +drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING); +} + +static inline bool +drm_dp_tps3_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x12 && + dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED; +} + +static inline bool +drm_dp_max_downspread(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 || + dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5; +} + +static inline bool +drm_dp_tps4_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x14 && + dpcd[DP_MAX_DOWNSPREAD] & DP_TPS4_SUPPORTED; +} + +static inline u8 +drm_dp_training_pattern_mask(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return (dpcd[DP_DPCD_REV] >= 0x14) ? DP_TRAINING_PATTERN_MASK_1_4 : + DP_TRAINING_PATTERN_MASK; +} + +static inline bool +drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT; +} + +/* DP/eDP DSC support */ +u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], + bool is_edp); +u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); +int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], + u8 dsc_bpc[3]); + +static inline bool +drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_SUPPORT - DP_DSC_SUPPORT] & + DP_DSC_DECOMPRESSION_IS_SUPPORTED; +} + +static inline u16 +drm_edp_dsc_sink_output_bpp(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] | + (dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] & + DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK << + DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT); +} + +static inline u32 +drm_dp_dsc_sink_max_slice_width(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + /* Max Slicewidth = Number of Pixels * 320 */ + return dsc_dpcd[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] * + DP_DSC_SLICE_WIDTH_MULTIPLIER; +} + +/* Forward Error Correction Support on DP 1.4 */ +static inline bool +drm_dp_sink_supports_fec(const u8 fec_capable) +{ + return fec_capable & DP_FEC_CAPABLE; +} + +static inline bool +drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_8B10B; +} + +static inline bool +drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_EDP_CONFIGURATION_CAP] & + DP_ALTERNATE_SCRAMBLER_RESET_CAP; +} + +/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */ +static inline bool +drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWN_STREAM_PORT_COUNT] & + DP_MSA_TIMING_PAR_IGNORED; +} + +/** + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support + * @edp_dpcd: The DPCD to check + * + * Note that currently this function will return %false for panels which support various DPCD + * backlight features but which require the brightness be set through PWM, and don't support setting + * the brightness level via the DPCD. + * + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false + * otherwise + */ +static inline bool +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE]) +{ + return !!(edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP); +} + +/* + * DisplayPort AUX channel + */ + +/** + * struct drm_dp_aux_msg - DisplayPort AUX channel transaction + * @address: address of the (first) register to access + * @request: contains the type of transaction (see DP_AUX_* macros) + * @reply: upon completion, contains the reply type of the transaction + * @buffer: pointer to a transmission or reception buffer + * @size: size of @buffer + */ +struct drm_dp_aux_msg { + unsigned int address; + u8 request; + u8 reply; + void *buffer; + size_t size; +}; + +struct cec_adapter; +struct edid; +struct drm_connector; + +/** + * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX + * @lock: mutex protecting this struct + * @adap: the CEC adapter for CEC-Tunneling-over-AUX support. + * @connector: the connector this CEC adapter is associated with + * @unregister_work: unregister the CEC adapter + */ +struct drm_dp_aux_cec { + struct mutex lock; + struct cec_adapter *adap; + struct drm_connector *connector; + struct delayed_work unregister_work; +}; + +/** + * struct drm_dp_aux - DisplayPort AUX channel + * + * An AUX channel can also be used to transport I2C messages to a sink. A + * typical application of that is to access an EDID that's present in the sink + * device. The @transfer() function can also be used to execute such + * transactions. The drm_dp_aux_register() function registers an I2C adapter + * that can be passed to drm_probe_ddc(). Upon removal, drivers should call + * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long + * transfers by default; if a partial response is received, the adapter will + * drop down to the size given by the partial response for this transaction + * only. + */ +struct drm_dp_aux { + /** + * @name: user-visible name of this AUX channel and the + * I2C-over-AUX adapter. + * + * It's also used to specify the name of the I2C adapter. If set + * to %NULL, dev_name() of @dev will be used. + */ + const char *name; + + /** + * @ddc: I2C adapter that can be used for I2C-over-AUX + * communication + */ + struct i2c_adapter ddc; + + /** + * @dev: pointer to struct device that is the parent for this + * AUX channel. + */ + struct device *dev; + + /** + * @drm_dev: pointer to the &drm_device that owns this AUX channel. + * Beware, this may be %NULL before drm_dp_aux_register() has been + * called. + * + * It should be set to the &drm_device that will be using this AUX + * channel as early as possible. For many graphics drivers this should + * happen before drm_dp_aux_init(), however it's perfectly fine to set + * this field later so long as it's assigned before calling + * drm_dp_aux_register(). + */ + struct drm_device *drm_dev; + + /** + * @crtc: backpointer to the crtc that is currently using this + * AUX channel + */ + struct drm_crtc *crtc; + + /** + * @hw_mutex: internal mutex used for locking transfers. + * + * Note that if the underlying hardware is shared among multiple + * channels, the driver needs to do additional locking to + * prevent concurrent access. + */ + struct mutex hw_mutex; + + /** + * @crc_work: worker that captures CRCs for each frame + */ + struct work_struct crc_work; + + /** + * @crc_count: counter of captured frame CRCs + */ + u8 crc_count; + + /** + * @transfer: transfers a message representing a single AUX + * transaction. + * + * This is a hardware-specific implementation of how + * transactions are executed that the drivers must provide. + * + * A pointer to a &drm_dp_aux_msg structure describing the + * transaction is passed into this function. Upon success, the + * implementation should return the number of payload bytes that + * were transferred, or a negative error-code on failure. + * + * Helpers will propagate these errors, with the exception of + * the %-EBUSY error, which causes a transaction to be retried. + * On a short, helpers will return %-EPROTO to make it simpler + * to check for failure. + * + * The @transfer() function must only modify the reply field of + * the &drm_dp_aux_msg structure. The retry logic and i2c + * helpers assume this is the case. + * + * Also note that this callback can be called no matter the + * state @dev is in. Drivers that need that device to be powered + * to perform this operation will first need to make sure it's + * been properly enabled. + */ + ssize_t (*transfer)(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg); + + /** + * @i2c_nack_count: Counts I2C NACKs, used for DP validation. + */ + unsigned i2c_nack_count; + /** + * @i2c_defer_count: Counts I2C DEFERs, used for DP validation. + */ + unsigned i2c_defer_count; + /** + * @cec: struct containing fields used for CEC-Tunneling-over-AUX. + */ + struct drm_dp_aux_cec cec; + /** + * @is_remote: Is this AUX CH actually using sideband messaging. + */ + bool is_remote; +}; + +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); + +/** + * drm_dp_dpcd_readb() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_writeb() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write(aux, offset, &value, 1); +} + +int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, + u8 dpcd[DP_RECEIVER_CAP_SIZE]); + +int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, + u8 status[DP_LINK_STATUS_SIZE]); + +int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, + enum drm_dp_phy dp_phy, + u8 link_status[DP_LINK_STATUS_SIZE]); + +bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, + u8 real_edid_checksum); + +int drm_dp_read_downstream_info(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]); +bool drm_dp_downstream_is_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 type); +bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +bool drm_dp_downstream_420_passthrough(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +struct drm_display_mode *drm_dp_downstream_mode(struct drm_device *dev, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]); +void drm_dp_downstream_debug(struct seq_file *m, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid, + struct drm_dp_aux *aux); +enum drm_mode_subconnector +drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +void drm_dp_set_subconnector_property(struct drm_connector *connector, + enum drm_connector_status status, + const u8 *dpcd, + const u8 port_cap[4]); + +struct drm_dp_desc; +bool drm_dp_read_sink_count_cap(struct drm_connector *connector, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const struct drm_dp_desc *desc); +int drm_dp_read_sink_count(struct drm_dp_aux *aux); + +int drm_dp_read_lttpr_common_caps(struct drm_dp_aux *aux, + u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux, + enum drm_dp_phy dp_phy, + u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +void drm_dp_remote_aux_init(struct drm_dp_aux *aux); +void drm_dp_aux_init(struct drm_dp_aux *aux); +int drm_dp_aux_register(struct drm_dp_aux *aux); +void drm_dp_aux_unregister(struct drm_dp_aux *aux); + +int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc); +int drm_dp_stop_crc(struct drm_dp_aux *aux); + +struct drm_dp_dpcd_ident { + u8 oui[3]; + u8 device_id[6]; + u8 hw_rev; + u8 sw_major_rev; + u8 sw_minor_rev; +} __packed; + +/** + * struct drm_dp_desc - DP branch/sink device descriptor + * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). + * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks. + */ +struct drm_dp_desc { + struct drm_dp_dpcd_ident ident; + u32 quirks; +}; + +int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, + bool is_branch); + +/** + * enum drm_dp_quirk - Display Port sink/branch device specific quirks + * + * Display Port sink and branch devices in the wild have a variety of bugs, try + * to collect them here. The quirks are shared, but it's up to the drivers to + * implement workarounds for them. + */ +enum drm_dp_quirk { + /** + * @DP_DPCD_QUIRK_CONSTANT_N: + * + * The device requires main link attributes Mvid and Nvid to be limited + * to 16 bits. So will give a constant value (0x8000) for compatability. + */ + DP_DPCD_QUIRK_CONSTANT_N, + /** + * @DP_DPCD_QUIRK_NO_PSR: + * + * The device does not support PSR even if reports that it supports or + * driver still need to implement proper handling for such device. + */ + DP_DPCD_QUIRK_NO_PSR, + /** + * @DP_DPCD_QUIRK_NO_SINK_COUNT: + * + * The device does not set SINK_COUNT to a non-zero value. + * The driver should ignore SINK_COUNT during detection. Note that + * drm_dp_read_sink_count_cap() automatically checks for this quirk. + */ + DP_DPCD_QUIRK_NO_SINK_COUNT, + /** + * @DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD: + * + * The device supports MST DSC despite not supporting Virtual DPCD. + * The DSC caps can be read from the physical aux instead. + */ + DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD, + /** + * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS: + * + * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite + * the DP_MAX_LINK_RATE register reporting a lower max multiplier. + */ + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS, +}; + +/** + * drm_dp_has_quirk() - does the DP device have a specific quirk + * @desc: Device descriptor filled by drm_dp_read_desc() + * @quirk: Quirk to query for + * + * Return true if DP device identified by @desc has @quirk. + */ +static inline bool +drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) +{ + return desc->quirks & BIT(quirk); +} + +/** + * struct drm_edp_backlight_info - Probed eDP backlight info struct + * @pwmgen_bit_count: The pwmgen bit count + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any + * @max: The maximum backlight level that may be set + * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? + * @aux_enable: Does the panel support the AUX enable cap? + * @aux_set: Does the panel support setting the brightness through AUX? + * + * This structure contains various data about an eDP backlight, which can be populated by using + * drm_edp_backlight_init(). + */ +struct drm_edp_backlight_info { + u8 pwmgen_bit_count; + u8 pwm_freq_pre_divider; + u16 max; + + bool lsb_reg_used : 1; + bool aux_enable : 1; + bool aux_set : 1; +}; + +int +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], + u16 *current_level, u8 *current_mode); +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); + +#if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ + (IS_MODULE(CONFIG_DRM_KMS_HELPER) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE))) + +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux); + +#else + +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, + struct drm_dp_aux *aux) +{ + return 0; +} + +#endif + +#ifdef CONFIG_DRM_DP_CEC +void drm_dp_cec_irq(struct drm_dp_aux *aux); +void drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector); +void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux); +void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid); +void drm_dp_cec_unset_edid(struct drm_dp_aux *aux); +#else +static inline void drm_dp_cec_irq(struct drm_dp_aux *aux) +{ +} + +static inline void +drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector) +{ +} + +static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux) +{ +} + +static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux, + const struct edid *edid) +{ +} + +static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) +{ +} + +#endif + +/** + * struct drm_dp_phy_test_params - DP Phy Compliance parameters + * @link_rate: Requested Link rate from DPCD 0x219 + * @num_lanes: Number of lanes requested by sing through DPCD 0x220 + * @phy_pattern: DP Phy test pattern from DPCD 0x248 + * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B + * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259 + * @enhanced_frame_cap: flag for enhanced frame capability. + */ +struct drm_dp_phy_test_params { + int link_rate; + u8 num_lanes; + u8 phy_pattern; + u8 hbr2_reset[2]; + u8 custom80[10]; + bool enhanced_frame_cap; +}; + +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data); +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data, u8 dp_rev); +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + u8 frl_mode); +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + u8 frl_type); +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); + +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector); +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]); +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 color_spc); +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc); + +#endif /* _DRM_DP_HELPER_H_ */ |