diff options
Diffstat (limited to 'drivers/phy/ralink/phy-mt7621-pci.c')
| -rw-r--r-- | drivers/phy/ralink/phy-mt7621-pci.c | 33 |
1 files changed, 20 insertions, 13 deletions
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c index 753cb5bab930..f56ff10b0885 100644 --- a/drivers/phy/ralink/phy-mt7621-pci.c +++ b/drivers/phy/ralink/phy-mt7621-pci.c @@ -5,6 +5,7 @@ */ #include <dt-bindings/phy/phy.h> +#include <linux/clk.h> #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/module.h> @@ -14,8 +15,6 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/sys_soc.h> -#include <mt7621.h> -#include <ralink_regs.h> #define RG_PE1_PIPE_REG 0x02c #define RG_PE1_PIPE_RST BIT(12) @@ -62,8 +61,6 @@ #define RG_PE1_FRC_MSTCKDIV BIT(5) -#define XTAL_MASK GENMASK(8, 6) - #define MAX_PHYS 2 /** @@ -71,6 +68,7 @@ * @dev: pointer to device * @regmap: kernel regmap pointer * @phy: pointer to the kernel PHY device + * @sys_clk: pointer to the system XTAL clock * @port_base: base register * @has_dual_port: if the phy has dual ports. * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst' @@ -80,6 +78,7 @@ struct mt7621_pci_phy { struct device *dev; struct regmap *regmap; struct phy *phy; + struct clk *sys_clk; void __iomem *port_base; bool has_dual_port; bool bypass_pipe_rst; @@ -116,12 +115,14 @@ static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy) } } -static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) +static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) { struct device *dev = phy->dev; - u32 xtal_mode; + unsigned long clk_rate; - xtal_mode = FIELD_GET(XTAL_MASK, rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0)); + clk_rate = clk_get_rate(phy->sys_clk); + if (!clk_rate) + return -EINVAL; /* Set PCIe Port PHY to disable SSC */ /* Debug Xtal Type */ @@ -139,13 +140,13 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); } - if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ + if (clk_rate == 40000000) { /* 40MHz Xtal */ /* Set Pre-divider ratio (for host mode) */ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01)); dev_dbg(dev, "Xtal is 40MHz\n"); - } else if (xtal_mode >= 6) { /* 25MHz Xal */ + } else if (clk_rate == 25000000) { /* 25MHz Xal */ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00)); @@ -196,13 +197,15 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR, FIELD_PREP(RG_PE1_H_PLL_BR, 0x00)); - if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ + if (clk_rate == 40000000) { /* 40MHz Xtal */ /* set force mode enable of da_pe1_mstckdiv */ mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG, RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV, FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) | RG_PE1_FRC_MSTCKDIV); } + + return 0; } static int mt7621_pci_phy_init(struct phy *phy) @@ -212,9 +215,7 @@ static int mt7621_pci_phy_init(struct phy *phy) if (mphy->bypass_pipe_rst) mt7621_bypass_pipe_rst(mphy); - mt7621_set_phy_for_ssc(mphy); - - return 0; + return mt7621_set_phy_for_ssc(mphy); } static int mt7621_pci_phy_power_on(struct phy *phy) @@ -324,6 +325,12 @@ static int mt7621_pci_phy_probe(struct platform_device *pdev) return PTR_ERR(phy->phy); } + phy->sys_clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->sys_clk)) { + dev_err(dev, "failed to get phy clock\n"); + return PTR_ERR(phy->sys_clk); + } + phy_set_drvdata(phy->phy, phy); provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); |