diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.h')
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 17 |
1 files changed, 7 insertions, 10 deletions
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index ef9b52f3152b..979bb6374678 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -172,9 +172,16 @@ enum mt7530_port_mode { /* Register for port vlan control */ #define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100)) #define PORT_SPEC_TAG BIT(5) +#define PVC_EG_TAG(x) (((x) & 0x7) << 8) +#define PVC_EG_TAG_MASK PVC_EG_TAG(7) #define VLAN_ATTR(x) (((x) & 0x3) << 6) #define VLAN_ATTR_MASK VLAN_ATTR(3) +enum mt7530_vlan_port_eg_tag { + MT7530_VLAN_EG_DISABLED = 0, + MT7530_VLAN_EG_CONSISTENT = 1, +}; + enum mt7530_vlan_port_attr { MT7530_VLAN_USER = 0, MT7530_VLAN_TRANSPARENT = 3, @@ -277,7 +284,6 @@ enum mt7530_vlan_port_attr { /* Registers for TRGMII on the both side */ #define MT7530_TRGMII_RCK_CTRL 0x7a00 -#define GSW_TRGMII_RCK_CTRL 0x300 #define RX_RST BIT(31) #define RXC_DQSISEL BIT(30) #define DQSI1_TAP_MASK (0x7f << 8) @@ -286,31 +292,24 @@ enum mt7530_vlan_port_attr { #define DQSI0_TAP(x) ((x) & 0x7f) #define MT7530_TRGMII_RCK_RTT 0x7a04 -#define GSW_TRGMII_RCK_RTT 0x304 #define DQS1_GATE BIT(31) #define DQS0_GATE BIT(30) #define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8) -#define GSW_TRGMII_RD(x) (0x310 + (x) * 8) #define BSLIP_EN BIT(31) #define EDGE_CHK BIT(30) #define RD_TAP_MASK 0x7f #define RD_TAP(x) ((x) & 0x7f) -#define GSW_TRGMII_TXCTRL 0x340 #define MT7530_TRGMII_TXCTRL 0x7a40 #define TRAIN_TXEN BIT(31) #define TXC_INV BIT(30) #define TX_RST BIT(28) #define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i)) -#define GSW_TRGMII_TD_ODT(i) (0x354 + 8 * (i)) #define TD_DM_DRVP(x) ((x) & 0xf) #define TD_DM_DRVN(x) (((x) & 0xf) << 4) -#define GSW_INTF_MODE 0x390 -#define INTF_MODE_TRGMII BIT(1) - #define MT7530_TRGMII_TCK_CTRL 0x7a78 #define TCK_TAP(x) (((x) & 0xf) << 8) @@ -443,7 +442,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) * @ds: The pointer to the dsa core structure * @bus: The bus used for the device and built-in PHY * @rstc: The pointer to reset control used by MCM - * @ethernet: The regmap used for access TRGMII-based registers * @core_pwr: The power supplied into the core * @io_pwr: The power supplied into the I/O * @reset: The descriptor for GPIO line tied to its reset pin @@ -460,7 +458,6 @@ struct mt7530_priv { struct dsa_switch *ds; struct mii_bus *bus; struct reset_control *rstc; - struct regmap *ethernet; struct regulator *core_pwr; struct regulator *io_pwr; struct gpio_desc *reset; |