diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/misc/Kconfig | 12 | ||||
-rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/misc/ixp4xx-beeper.c | 183 |
3 files changed, 0 insertions, 196 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 498cde376981..ae01507b7afd 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -309,18 +309,6 @@ config INPUT_GPIO_VIBRA To compile this driver as a module, choose M here: the module will be called gpio-vibra. -config INPUT_IXP4XX_BEEPER - tristate "IXP4XX Beeper support" - depends on ARCH_IXP4XX - help - If you say yes here, you can connect a beeper to the - ixp4xx gpio pins. This is used by the LinkSys NSLU2. - - If unsure, say Y. - - To compile this driver as a module, choose M here: the - module will be called ixp4xx-beeper. - config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index f593beed7e05..2a0943507467 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o -obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c deleted file mode 100644 index 05018d0c97c7..000000000000 --- a/drivers/input/misc/ixp4xx-beeper.c +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Generic IXP4xx beeper driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nslu2-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - */ - -#include <linux/module.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <mach/hardware.h> - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("ixp4xx beeper driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ixp4xx-beeper"); - -static DEFINE_SPINLOCK(beep_lock); - -static int ixp4xx_timer2_irq; - -static void ixp4xx_spkr_control(unsigned int pin, unsigned int count) -{ - unsigned long flags; - - spin_lock_irqsave(&beep_lock, flags); - - if (count) { - gpio_direction_output(pin, 0); - *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; - } else { - gpio_direction_output(pin, 1); - gpio_direction_input(pin); - *IXP4XX_OSRT2 = 0; - } - - spin_unlock_irqrestore(&beep_lock, flags); -} - -static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) -{ - unsigned int pin = (unsigned int) input_get_drvdata(dev); - unsigned int count = 0; - - if (type != EV_SND) - return -1; - - switch (code) { - case SND_BELL: - if (value) - value = 1000; - case SND_TONE: - break; - default: - return -1; - } - - if (value > 20 && value < 32767) - count = (ixp4xx_timer_freq / (value * 4)) - 1; - - ixp4xx_spkr_control(pin, count); - - return 0; -} - -static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id) -{ - unsigned int pin = (unsigned int) dev_id; - - /* clear interrupt */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; - - /* flip the beeper output */ - gpio_set_value(pin, !gpio_get_value(pin)); - - return IRQ_HANDLED; -} - -static int ixp4xx_spkr_probe(struct platform_device *dev) -{ - struct input_dev *input_dev; - int irq; - int err; - - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; - - input_set_drvdata(input_dev, (void *) dev->id); - - input_dev->name = "ixp4xx beeper"; - input_dev->phys = "ixp4xx/gpio"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x001f; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &dev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_SND); - input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); - input_dev->event = ixp4xx_spkr_event; - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - err = irq; - goto err_free_device; - } - - err = gpio_request(dev->id, "ixp4-beeper"); - if (err) - goto err_free_device; - - err = request_irq(irq, &ixp4xx_spkr_interrupt, - IRQF_NO_SUSPEND, "ixp4xx-beeper", - (void *) dev->id); - if (err) - goto err_free_gpio; - ixp4xx_timer2_irq = irq; - - err = input_register_device(input_dev); - if (err) - goto err_free_irq; - - platform_set_drvdata(dev, input_dev); - - return 0; - - err_free_irq: - free_irq(irq, (void *)dev->id); - err_free_gpio: - gpio_free(dev->id); - err_free_device: - input_free_device(input_dev); - - return err; -} - -static int ixp4xx_spkr_remove(struct platform_device *dev) -{ - struct input_dev *input_dev = platform_get_drvdata(dev); - unsigned int pin = (unsigned int) input_get_drvdata(input_dev); - - input_unregister_device(input_dev); - - /* turn the speaker off */ - disable_irq(ixp4xx_timer2_irq); - ixp4xx_spkr_control(pin, 0); - - free_irq(ixp4xx_timer2_irq, (void *)dev->id); - gpio_free(dev->id); - - return 0; -} - -static void ixp4xx_spkr_shutdown(struct platform_device *dev) -{ - struct input_dev *input_dev = platform_get_drvdata(dev); - unsigned int pin = (unsigned int) input_get_drvdata(input_dev); - - /* turn off the speaker */ - disable_irq(ixp4xx_timer2_irq); - ixp4xx_spkr_control(pin, 0); -} - -static struct platform_driver ixp4xx_spkr_platform_driver = { - .driver = { - .name = "ixp4xx-beeper", - }, - .probe = ixp4xx_spkr_probe, - .remove = ixp4xx_spkr_remove, - .shutdown = ixp4xx_spkr_shutdown, -}; -module_platform_driver(ixp4xx_spkr_platform_driver); - |