diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/ucd9000.c | 39 |
2 files changed, 30 insertions, 15 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 59859979571d..48ae5a5419c5 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -209,11 +209,11 @@ config SENSORS_TPS53679 be called tps53679. config SENSORS_UCD9000 - tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910" + tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910" help If you say yes here you get hardware monitoring support for TI - UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System - Health Controllers. + UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer + and System Health Controllers. This driver can also be built as a module. If so, the module will be called ucd9000. diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index a9229c6b0e84..23ea3415f166 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -18,7 +18,8 @@ #include <linux/gpio/driver.h> #include "pmbus.h" -enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 }; +enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd90320, ucd9090, + ucd90910 }; #define UCD9000_MONITOR_CONFIG 0xd5 #define UCD9000_NUM_PAGES 0xd6 @@ -38,7 +39,7 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 }; #define UCD9000_GPIO_OUTPUT 1 #define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07) -#define UCD9000_MON_PAGE(x) ((x) & 0x0f) +#define UCD9000_MON_PAGE(x) ((x) & 0x1f) #define UCD9000_MON_VOLTAGE 1 #define UCD9000_MON_TEMPERATURE 2 @@ -50,10 +51,12 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 }; #define UCD9000_GPIO_NAME_LEN 16 #define UCD9090_NUM_GPIOS 23 #define UCD901XX_NUM_GPIOS 26 +#define UCD90320_NUM_GPIOS 84 #define UCD90910_NUM_GPIOS 26 #define UCD9000_DEBUGFS_NAME_LEN 24 #define UCD9000_GPI_COUNT 8 +#define UCD90320_GPI_COUNT 32 struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; @@ -131,6 +134,7 @@ static const struct i2c_device_id ucd9000_id[] = { {"ucd90120", ucd90120}, {"ucd90124", ucd90124}, {"ucd90160", ucd90160}, + {"ucd90320", ucd90320}, {"ucd9090", ucd9090}, {"ucd90910", ucd90910}, {} @@ -155,6 +159,10 @@ static const struct of_device_id __maybe_unused ucd9000_of_match[] = { .data = (void *)ucd90160 }, { + .compatible = "ti,ucd90320", + .data = (void *)ucd90320 + }, + { .compatible = "ti,ucd9090", .data = (void *)ucd9090 }, @@ -322,6 +330,9 @@ static void ucd9000_probe_gpio(struct i2c_client *client, case ucd90160: data->gpio.ngpio = UCD901XX_NUM_GPIOS; break; + case ucd90320: + data->gpio.ngpio = UCD90320_NUM_GPIOS; + break; case ucd90910: data->gpio.ngpio = UCD90910_NUM_GPIOS; break; @@ -372,17 +383,18 @@ static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) struct ucd9000_debugfs_entry *entry = data; struct i2c_client *client = entry->client; u8 buffer[I2C_SMBUS_BLOCK_MAX]; - int ret; + int ret, i; ret = ucd9000_get_mfr_status(client, buffer); if (ret < 0) return ret; /* - * Attribute only created for devices with gpi fault bits at bits - * 16-23, which is the second byte of the response. + * GPI fault bits are in sets of 8, two bytes from end of response. */ - *val = !!(buffer[1] & BIT(entry->index)); + i = ret - 3 - entry->index / 8; + if (i >= 0) + *val = !!(buffer[i] & BIT(entry->index % 8)); return 0; } @@ -422,7 +434,7 @@ static int ucd9000_init_debugfs(struct i2c_client *client, { struct dentry *debugfs; struct ucd9000_debugfs_entry *entries; - int i; + int i, gpi_count; char name[UCD9000_DEBUGFS_NAME_LEN]; debugfs = pmbus_get_debugfs_dir(client); @@ -435,18 +447,21 @@ static int ucd9000_init_debugfs(struct i2c_client *client, /* * Of the chips this driver supports, only the UCD9090, UCD90160, - * and UCD90910 report GPI faults in their MFR_STATUS register, so only - * create the GPI fault debugfs attributes for those chips. + * UCD90320, and UCD90910 report GPI faults in their MFR_STATUS + * register, so only create the GPI fault debugfs attributes for those + * chips. */ if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || - mid->driver_data == ucd90910) { + mid->driver_data == ucd90320 || mid->driver_data == ucd90910) { + gpi_count = mid->driver_data == ucd90320 ? UCD90320_GPI_COUNT + : UCD9000_GPI_COUNT; entries = devm_kcalloc(&client->dev, - UCD9000_GPI_COUNT, sizeof(*entries), + gpi_count, sizeof(*entries), GFP_KERNEL); if (!entries) return -ENOMEM; - for (i = 0; i < UCD9000_GPI_COUNT; i++) { + for (i = 0; i < gpi_count; i++) { entries[i].client = client; entries[i].index = i; scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, |