diff options
Diffstat (limited to 'drivers/gpu/drm/msm/adreno/a6xx_gpu.c')
| -rw-r--r-- | drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 81 |
1 files changed, 74 insertions, 7 deletions
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index dc8ec2c94301..daf07800cde0 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2017-2019 The Linux Foundation. All rights reserved. */ #include "msm_gem.h" @@ -378,6 +378,18 @@ static int a6xx_hw_init(struct msm_gpu *gpu) struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); int ret; + /* + * During a previous slumber, GBIF halt is asserted to ensure + * no further transaction can go through GPU before GPU + * headswitch is turned off. + * + * This halt is deasserted once headswitch goes off but + * incase headswitch doesn't goes off clear GBIF halt + * here to ensure GPU wake-up doesn't fail because of + * halted GPU transactions. + */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0); + /* Make sure the GMU keeps the GPU on while we set it up */ a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET); @@ -406,12 +418,17 @@ static int a6xx_hw_init(struct msm_gpu *gpu) gpu_write(gpu, REG_A6XX_TPL1_ADDR_MODE_CNTL, 0x1); gpu_write(gpu, REG_A6XX_RBBM_SECVID_TSB_ADDR_MODE_CNTL, 0x1); - /* enable hardware clockgating */ - a6xx_set_hwcg(gpu, true); + /* + * enable hardware clockgating + * For now enable clock gating only for a630 + */ + if (adreno_is_a630(adreno_gpu)) + a6xx_set_hwcg(gpu, true); - /* VBIF start */ - gpu_write(gpu, REG_A6XX_VBIF_GATE_OFF_WRREQ_EN, 0x00000009); + /* VBIF/GBIF start*/ gpu_write(gpu, REG_A6XX_RBBM_VBIF_CLIENT_QOS_CNTL, 0x3); + if (adreno_is_a630(adreno_gpu)) + gpu_write(gpu, REG_A6XX_VBIF_GATE_OFF_WRREQ_EN, 0x00000009); /* Make all blocks contribute to the GPU BUSY perf counter */ gpu_write(gpu, REG_A6XX_RBBM_PERFCTR_GPU_BUSY_MASKED, 0xffffffff); @@ -537,12 +554,19 @@ static int a6xx_hw_init(struct msm_gpu *gpu) a6xx_flush(gpu, gpu->rb[0]); if (!a6xx_idle(gpu, gpu->rb[0])) return -EINVAL; - } else { - /* Print a warning so if we die, we know why */ + } else if (ret == -ENODEV) { + /* + * This device does not use zap shader (but print a warning + * just in case someone got their dt wrong.. hopefully they + * have a debug UART to realize the error of their ways... + * if you mess this up you are about to crash horribly) + */ dev_warn_once(gpu->dev->dev, "Zap shader not enabled - using SECVID_TRUST_CNTL instead\n"); gpu_write(gpu, REG_A6XX_RBBM_SECVID_TRUST_CNTL, 0x0); ret = 0; + } else { + return ret; } out: @@ -724,6 +748,39 @@ static const u32 a6xx_register_offsets[REG_ADRENO_REGISTER_MAX] = { REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_CNTL, REG_A6XX_CP_RB_CNTL), }; +#define GBIF_CLIENT_HALT_MASK BIT(0) +#define GBIF_ARB_HALT_MASK BIT(1) + +static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu) +{ + struct msm_gpu *gpu = &adreno_gpu->base; + + if(!a6xx_has_gbif(adreno_gpu)){ + gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0xf); + spin_until((gpu_read(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL1) & + 0xf) == 0xf); + gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0); + + return; + } + + /* Halt new client requests on GBIF */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK); + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & + (GBIF_CLIENT_HALT_MASK)) == GBIF_CLIENT_HALT_MASK); + + /* Halt all AXI requests on GBIF */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_ARB_HALT_MASK); + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & + (GBIF_ARB_HALT_MASK)) == GBIF_ARB_HALT_MASK); + + /* + * GMU needs DDR access in slumber path. Deassert GBIF halt now + * to allow for GMU to access system memory. + */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0); +} + static int a6xx_pm_resume(struct msm_gpu *gpu) { struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); @@ -748,6 +805,16 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu) devfreq_suspend_device(gpu->devfreq.devfreq); + /* + * Make sure the GMU is idle before continuing (because some transitions + * may use VBIF + */ + a6xx_gmu_wait_for_idle(&a6xx_gpu->gmu); + + /* Clear the VBIF pipe before shutting down */ + /* FIXME: This accesses the GPU - do we need to make sure it is on? */ + a6xx_bus_clear_pending_transactions(adreno_gpu); + return a6xx_gmu_stop(a6xx_gpu); } |