summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-realtek-otto.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-realtek-otto.c')
-rw-r--r--drivers/gpio/gpio-realtek-otto.c166
1 files changed, 85 insertions, 81 deletions
diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
index 63dcf42f7c20..d6418f89d3f6 100644
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -46,10 +46,20 @@
* @lock: Lock for accessing the IRQ registers and values
* @intr_mask: Mask for interrupts lines
* @intr_type: Interrupt type selection
+ * @bank_read: Read a bank setting as a single 32-bit value
+ * @bank_write: Write a bank setting as a single 32-bit value
+ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
+ *
+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
+ * a value from (to) these registers. The IMR register consists of four 16-bit
+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
+ * 32 overflow into the second register.
*
* Because the interrupt mask register (IMR) combines the function of IRQ type
* selection and masking, two extra values are stored. @intr_mask is used to
- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
* the selected interrupt types. The logical AND of these values is written to
* IMR on changes.
*/
@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl {
void __iomem *cpumask_base;
struct cpumask cpu_irq_maskable;
raw_spinlock_t lock;
- u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
- u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
- unsigned int (*port_offset_u8)(unsigned int port);
- unsigned int (*port_offset_u16)(unsigned int port);
+ u8 intr_mask[REALTEK_GPIO_MAX];
+ u8 intr_type[REALTEK_GPIO_MAX];
+ u32 (*bank_read)(void __iomem *reg);
+ void (*bank_write)(void __iomem *reg, u32 value);
+ unsigned int (*line_imr_pos)(unsigned int line);
};
/* Expand with more flags as devices with other quirks are added */
@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
* port. The two interrupt mask registers store two bits per GPIO, so use u16
* values.
*/
-static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
{
- return port;
+ return ioread32be(reg);
}
-static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
{
- return 2 * port;
+ iowrite32be(value, reg);
+}
+
+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
+{
+ unsigned int port_pin = line % 8;
+ unsigned int port = line / 8;
+
+ return 2 * (8 * (port ^ 1) + port_pin);
}
/*
@@ -119,66 +138,67 @@ static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
* per GPIO, so use u16 values. The first register contains ports 1 and 0, the
* second ports 3 and 2.
*/
-static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
+static u32 realtek_gpio_bank_read(void __iomem *reg)
{
- return 3 - port;
+ return ioread32(reg);
}
-static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
+static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
{
- return 2 * (port ^ 1);
+ iowrite32(value, reg);
}
-static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, u16 irq_type, u16 irq_mask)
+static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
{
- iowrite16(irq_type & irq_mask,
- ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
+ return 2 * line;
}
-static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, u8 mask)
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
{
- iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+ ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
}
-static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
{
- return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+ return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
}
-/* Set the rising and falling edge mask bits for a GPIO port pin */
-static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
+/* Set the rising and falling edge mask bits for a GPIO pin */
+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
{
- return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
+ void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
+ unsigned int line_shift = ctrl->line_imr_pos(line);
+ unsigned int shift = line_shift % 32;
+ u32 irq_type = ctrl->intr_type[line];
+ u32 irq_mask = ctrl->intr_mask[line];
+ u32 reg_val;
+
+ reg += 4 * (line_shift / 32);
+ reg_val = ioread32(reg);
+ reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
+ reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
+ iowrite32(reg_val, reg);
}
static void realtek_gpio_irq_ack(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
irq_hw_number_t line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
- realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
+ realtek_gpio_clear_isr(ctrl, BIT(line));
}
static void realtek_gpio_irq_unmask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 m;
gpiochip_enable_irq(&ctrl->gc, line);
raw_spin_lock_irqsave(&ctrl->lock, flags);
- m = ctrl->intr_mask[port];
- m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- ctrl->intr_mask[port] = m;
- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
}
@@ -186,16 +206,11 @@ static void realtek_gpio_irq_mask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 m;
raw_spin_lock_irqsave(&ctrl->lock, flags);
- m = ctrl->intr_mask[port];
- m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- ctrl->intr_mask[port] = m;
- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ ctrl->intr_mask[line] = 0;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
gpiochip_disable_irq(&ctrl->gc, line);
@@ -205,10 +220,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 type, t;
+ u8 type;
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_FALLING:
@@ -227,11 +240,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
irq_set_handler_locked(data, handle_edge_irq);
raw_spin_lock_irqsave(&ctrl->lock, flags);
- t = ctrl->intr_type[port];
- t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- t |= realtek_gpio_imr_bits(port_pin, type);
- ctrl->intr_type[port] = t;
- realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
+ ctrl->intr_type[line] = type;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
return 0;
@@ -242,28 +252,21 @@ static void realtek_gpio_irq_handler(struct irq_desc *desc)
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
- unsigned int lines_done;
- unsigned int port_pin_count;
unsigned long status;
int offset;
chained_irq_enter(irq_chip, desc);
- for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
- status = realtek_gpio_read_isr(ctrl, lines_done / 8);
- port_pin_count = min(gc->ngpio - lines_done, 8U);
- for_each_set_bit(offset, &status, port_pin_count)
- generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
- }
+ status = realtek_gpio_read_isr(ctrl);
+ for_each_set_bit(offset, &status, gc->ngpio)
+ generic_handle_domain_irq(gc->irq.domain, offset);
chained_irq_exit(irq_chip, desc);
}
-static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, int cpu)
+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
{
- return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
- REALTEK_GPIO_PORTS_PER_BANK * cpu;
+ return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
}
static int realtek_gpio_irq_set_affinity(struct irq_data *data,
@@ -271,12 +274,10 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
void __iomem *irq_cpu_mask;
unsigned long flags;
int cpu;
- u8 v;
+ u32 v;
if (!ctrl->cpumask_base)
return -ENXIO;
@@ -284,15 +285,15 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
raw_spin_lock_irqsave(&ctrl->lock, flags);
for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
- v = ioread8(irq_cpu_mask);
+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
+ v = ctrl->bank_read(irq_cpu_mask);
if (cpumask_test_cpu(cpu, dest))
- v |= BIT(port_pin);
+ v |= BIT(line);
else
- v &= ~BIT(port_pin);
+ v &= ~BIT(line);
- iowrite8(v, irq_cpu_mask);
+ ctrl->bank_write(irq_cpu_mask, v);
}
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
@@ -305,16 +306,17 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
static int realtek_gpio_irq_init(struct gpio_chip *gc)
{
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
- unsigned int port;
+ u32 mask_all = GENMASK(gc->ngpio - 1, 0);
+ unsigned int line;
int cpu;
- for (port = 0; (port * 8) < gc->ngpio; port++) {
- realtek_gpio_write_imr(ctrl, port, 0, 0);
- realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+ for (line = 0; line < gc->ngpio; line++)
+ realtek_gpio_update_line_imr(ctrl, line);
- for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
- iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
- }
+ realtek_gpio_clear_isr(ctrl, mask_all);
+
+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
+ ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
return 0;
}
@@ -387,12 +389,14 @@ static int realtek_gpio_probe(struct platform_device *pdev)
if (dev_flags & GPIO_PORTS_REVERSED) {
bgpio_flags = 0;
- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
+ ctrl->bank_read = realtek_gpio_bank_read;
+ ctrl->bank_write = realtek_gpio_bank_write;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
} else {
bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
+ ctrl->bank_read = realtek_gpio_bank_read_swapped;
+ ctrl->bank_write = realtek_gpio_bank_write_swapped;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
}
err = bgpio_init(&ctrl->gc, dev, 4,
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-27 04:27:56 +0000