diff options
Diffstat (limited to 'drivers/ata/sata_sil.c')
| -rw-r--r-- | drivers/ata/sata_sil.c | 723 |
1 files changed, 723 insertions, 0 deletions
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c new file mode 100644 index 000000000000..907faa87239b --- /dev/null +++ b/drivers/ata/sata_sil.c @@ -0,0 +1,723 @@ +/* + * sata_sil.c - Silicon Image SATA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2005 Red Hat, Inc. + * Copyright 2003 Benjamin Herrenschmidt + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "sata_sil" +#define DRV_VERSION "2.0" + +enum { + /* + * host flags + */ + SIL_FLAG_NO_SATA_IRQ = (1 << 28), + SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), + SIL_FLAG_MOD15WRITE = (1 << 30), + + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, + + /* + * Controller IDs + */ + sil_3112 = 0, + sil_3112_no_sata_irq = 1, + sil_3512 = 2, + sil_3114 = 3, + + /* + * Register offsets + */ + SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ + SIL_MASK_IDE0_INT = (1 << 22), + SIL_MASK_IDE1_INT = (1 << 23), + SIL_MASK_IDE2_INT = (1 << 24), + SIL_MASK_IDE3_INT = (1 << 25), + SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, + SIL_MASK_4PORT = SIL_MASK_2PORT | + SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + + /* BMDMA/BMDMA2 */ + SIL_INTR_STEERING = (1 << 1), + + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + + /* + * Others + */ + SIL_QUIRK_MOD15WRITE = (1 << 0), + SIL_QUIRK_UDMA5MAX = (1 << 1), +}; + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil_pci_device_resume(struct pci_dev *pdev); +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static void sil_post_set_mode (struct ata_port *ap); +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); + + +static const struct pci_device_id sil_pci_tbl[] = { + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, + { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq }, + { } /* terminate list */ +}; + + +/* TODO firmware versions should be added - eric */ +static const struct sil_drivelist { + const char * product; + unsigned int quirk; +} sil_blacklist [] = { + { "ST320012AS", SIL_QUIRK_MOD15WRITE }, + { "ST330013AS", SIL_QUIRK_MOD15WRITE }, + { "ST340017AS", SIL_QUIRK_MOD15WRITE }, + { "ST360015AS", SIL_QUIRK_MOD15WRITE }, + { "ST380023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, + { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, + { } +}; + +static struct pci_driver sil_pci_driver = { + .name = DRV_NAME, + .id_table = sil_pci_tbl, + .probe = sil_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, +}; + +static struct scsi_host_template sil_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +}; + +static const struct ata_port_operations sil_ops = { + .port_disable = ata_port_disable, + .dev_config = sil_dev_config, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .post_set_mode = sil_post_set_mode, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + .freeze = sil_freeze, + .thaw = sil_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = sil_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = sil_scr_read, + .scr_write = sil_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_info sil_port_info[] = { + /* sil_3112 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3112_no_sata_irq */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE | + SIL_FLAG_NO_SATA_IRQ, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3512 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, + /* sil_3114 */ + { + .sht = &sil_sht, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, +}; + +/* per-port register offsets */ +/* TODO: we can probably calculate rather than use a table */ +static const struct { + unsigned long tf; /* ATA taskfile register block */ + unsigned long ctl; /* ATA control/altstatus register block */ + unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ + unsigned long scr; /* SATA control register block */ + unsigned long sien; /* SATA Interrupt Enable register */ + unsigned long xfer_mode;/* data transfer mode register */ + unsigned long sfis_cfg; /* SATA FIS reception config register */ +} sil_port[] = { + /* port 0 ... */ + { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + /* ... port 3 */ +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int slow_down = 0; +module_param(slow_down, int, 0444); +MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); + + +static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) +{ + u8 cache_line = 0; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +static void sil_post_set_mode (struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + struct ata_device *dev; + void __iomem *addr = + host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + u32 tmp, dev_mode[2]; + unsigned int i; + + for (i = 0; i < 2; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + dev_mode[i] = 0; /* PIO0/1/2 */ + else if (dev->flags & ATA_DFLAG_PIO) + dev_mode[i] = 1; /* PIO3/4 */ + else + dev_mode[i] = 3; /* UDMA */ + /* value 2 indicates MDMA */ + } + + tmp = readl(addr); + tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); + tmp |= dev_mode[0]; + tmp |= (dev_mode[1] << 4); + writel(tmp, addr); + readl(addr); /* flush */ +} + +static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) +{ + unsigned long offset = ap->ioaddr.scr_addr; + + switch (sc_reg) { + case SCR_STATUS: + return offset + 4; + case SCR_ERROR: + return offset + 8; + case SCR_CONTROL: + return offset; + default: + /* do nothing */ + break; + } + + return 0; +} + +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + if (mmio) + return readl(mmio); + return 0xffffffffU; +} + +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); + if (mmio) + writel(val, mmio); +} + +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + u8 status; + + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + u32 serror; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + serror = sil_scr_read(ap, SCR_ERROR); + sil_scr_write(ap, SCR_ERROR, serror); + + /* Trigger hotplug and accumulate SError only if the + * port isn't already frozen. Otherwise, PHY events + * during hardreset makes controllers with broken SIEN + * repeat probing needlessly. + */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + ata_ehi_hotplugged(&ap->eh_info); + ap->eh_info.serror |= serror; + } + + goto freeze; + } + + if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) + goto freeze; + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_hsm_move(ap, qc, status, 0); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + void __iomem *mmio_base = host_set->mmio_base; + int handled = 0; + int i; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) + continue; + + /* turn off SATA_IRQ if not supported */ + if (ap->flags & SIL_FLAG_NO_SATA_IRQ) + bmdma2 &= ~SIL_DMA_SATA_IRQ; + + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* clear IRQ */ + ata_chk_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on SATA IRQ if supported */ + if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + +/** + * sil_dev_config - Apply device/host-specific errata fixups + * @ap: Port containing device to be examined + * @dev: Device to be examined + * + * After the IDENTIFY [PACKET] DEVICE step is complete, and a + * device is known to be present, this function is called. + * We apply two errata fixups which are specific to Silicon Image, + * a Seagate and a Maxtor fixup. + * + * For certain Seagate devices, we must limit the maximum sectors + * to under 8K. + * + * For certain Maxtor devices, we must not program the drive + * beyond udma5. + * + * Both fixups are unfairly pessimistic. As soon as I get more + * information on these errata, I will create a more exhaustive + * list, and apply the fixups to only the specific + * devices/hosts/firmwares that need it. + * + * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted + * The Maxtor quirk is in the blacklist, but I'm keeping the original + * pessimistic fix for the following reasons... + * - There seems to be less info on it, only one device gleaned off the + * Windows driver, maybe only one is affected. More info would be greatly + * appreciated. + * - But then again UDMA5 is hardly anything to complain about + */ +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + unsigned int n, quirks = 0; + unsigned char model_num[41]; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + + for (n = 0; sil_blacklist[n].product; n++) + if (!strcmp(sil_blacklist[n].product, model_num)) { + quirks = sil_blacklist[n].quirk; + break; + } + + /* limit requests to 15 sectors */ + if (slow_down || + ((ap->flags & SIL_FLAG_MOD15WRITE) && + (quirks & SIL_QUIRK_MOD15WRITE))) { + ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " + "(mod15write workaround)\n"); + dev->max_sectors = 15; + return; + } + + /* limit to udma5 */ + if (quirks & SIL_QUIRK_UDMA5MAX) { + ata_dev_printk(dev, KERN_INFO, + "applying Maxtor errata fix %s\n", model_num); + dev->udma_mask &= ATA_UDMA5; + return; + } +} + +static void sil_init_controller(struct pci_dev *pdev, + int n_ports, unsigned long host_flags, + void __iomem *mmio_base) +{ + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_printk(KERN_INFO, &pdev->dev, + "Applying R_ERR on DMA activate " + "FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void __iomem *mmio_base; + int rc; + unsigned int i; + int pci_dev_busy = 0; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = pci_dev_to_dev(pdev); + probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; + probe_ent->sht = sil_port_info[ent->driver_data].sht; + probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; + probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; + probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; + probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = IRQF_SHARED; + probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; + + mmio_base = pci_iomap(pdev, 5, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + probe_ent->mmio_base = mmio_base; + + base = (unsigned long) mmio_base; + + for (i = 0; i < probe_ent->n_ports; i++) { + probe_ent->port[i].cmd_addr = base + sil_port[i].tf; + probe_ent->port[i].altstatus_addr = + probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; + probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; + probe_ent->port[i].scr_addr = base + sil_port[i].scr; + ata_std_ports(&probe_ent->port[i]); + } + + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + mmio_base); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, + host_set->mmio_base); + ata_host_set_resume(host_set); + + return 0; +} + +static int __init sil_init(void) +{ + return pci_register_driver(&sil_pci_driver); +} + +static void __exit sil_exit(void) +{ + pci_unregister_driver(&sil_pci_driver); +} + + +module_init(sil_init); +module_exit(sil_exit); |