diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 343 |
1 files changed, 334 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 4a30024aa48f..f60d36c03b9b 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -1,13 +1,16 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net> */ /dts-v1/; #include "sm6115.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> / { model = "F(x)tec Pro1X (QX1050)"; @@ -32,12 +35,48 @@ }; }; + disp_elvdd_supply: disp-elvdd-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvdd_supply"; + }; + + disp_elvss_supply: disp-elvss-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvss_supply"; + }; + + disp_vcc_supply: disp-vcc-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vcc_supply"; + }; + + disp_vci_supply: disp-vci-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vci_supply"; + }; + gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&vol_up_n>; + pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>; pinctrl-names = "default"; + hall-switch { + label = "Hall Switch"; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + debounce-interval = <90>; + wakeup-source; + }; + + key-camera { + label = "Camera Button"; + linux,code = <KEY_CAMERA>; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + key-volume-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; @@ -47,11 +86,119 @@ wakeup-source; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + capslock-led { + label = "green:capslock"; + function = LED_FUNCTION_CAPSLOCK; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "kbd-capslock"; + default-state = "off"; + }; + }; + + ts_vdd_supply: ts-vdd-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vdd_supply"; + gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ts_vddio_supply: ts-vddio-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio_supply"; + gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; -&dispcc { - /* HACK: disable until a panel driver is ready to retain simplefb */ - status = "disabled"; +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; + + pca9534: gpio@21 { + compatible = "nxp,pca9534"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + + interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + + irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&ts_vdd_supply>; + VDDIO-supply = <&ts_vddio_supply>; + + pinctrl-0 = <&ts_int_n>, <&ts_rst_n>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18a>; + status = "okay"; + + panel: panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; + + elvdd-supply = <&disp_elvdd_supply>; + elvss-supply = <&disp_elvss_supply>; + vcc-supply = <&disp_vcc_supply>; + vci-supply = <&disp_vci_supply>; + vddio-supply = <&pm6125_l9a>; + + pinctrl-0 = <&mdss_dsi_n &panel_en_n>; + pinctrl-names = "default"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + status = "okay"; }; &pm6125_gpios { @@ -64,6 +211,73 @@ }; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -73,6 +287,25 @@ status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -105,6 +338,7 @@ pm6125_l5a: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; pm6125_l6a: l6 { @@ -206,12 +440,84 @@ }; }; +&sdc2_state_off { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_state_on { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&pm6125_l22a>; + vqmmc-supply = <&pm6125_l5a>; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32764>; }; &tlmm { gpio-reserved-ranges = <0 4>, <14 4>; + + key_camera_n: key-camera-n-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + panel_en_n: panel-en-n-state { + pins = "gpio65"; + function = "gpio"; + bias-disable; + }; + + ts_rst_n: ts-rst-n-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_n: ts-int-n-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + mdss_dsi_n: mdss-dsi-n-state { + pins = "gpio82"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + hall_sensor_n: hall-sensor-n-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { @@ -233,10 +539,8 @@ status = "okay"; }; -&usb_dwc3 { - /delete-property/ usb-role-switch; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -246,6 +550,27 @@ status = "okay"; }; +&usb_qmpphy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8a>; + vdd-1.8-xo-supply = <&pm6125_l16a>; + vdd-1.3-rfa-supply = <&pm6125_l17a>; + vdd-3.3-ch0-supply = <&pm6125_l23a>; + + qcom,ath10k-calibration-variant = "Fxtec_QX1050"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; |