diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-zoom-debugboard.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom-debugboard.c | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1f13e2a1f322..bb4018b60642 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,20 +14,20 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> -#define ZOOM2_SMSC911X_CS 7 -#define ZOOM2_SMSC911X_GPIO 158 -#define ZOOM2_QUADUART_CS 3 -#define ZOOM2_QUADUART_GPIO 102 +#define ZOOM_SMSC911X_CS 7 +#define ZOOM_SMSC911X_GPIO 158 +#define ZOOM_QUADUART_CS 3 +#define ZOOM_QUADUART_GPIO 102 #define QUART_CLK 1843200 #define DEBUG_BASE 0x08000000 -#define ZOOM2_ETHR_START DEBUG_BASE +#define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom2_smsc911x_resources[] = { +static struct resource zoom_smsc911x_resources[] = { [0] = { - .start = ZOOM2_ETHR_START, - .end = ZOOM2_ETHR_START + SZ_4K, + .start = ZOOM_ETHR_START, + .end = ZOOM_ETHR_START + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = { }, }; -static struct smsc911x_platform_config zoom2_smsc911x_config = { +static struct smsc911x_platform_config zoom_smsc911x_config = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, .flags = SMSC911X_USE_32BIT, .phy_interface = PHY_INTERFACE_MODE_MII, }; -static struct platform_device zoom2_smsc911x_device = { +static struct platform_device zoom_smsc911x_device = { .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), - .resource = zoom2_smsc911x_resources, + .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), + .resource = zoom_smsc911x_resources, .dev = { - .platform_data = &zoom2_smsc911x_config, + .platform_data = &zoom_smsc911x_config, }, }; -static inline void __init zoom2_init_smsc911x(void) +static inline void __init zoom_init_smsc911x(void) { int eth_cs; unsigned long cs_mem_base; int eth_gpio = 0; - eth_cs = ZOOM2_SMSC911X_CS; + eth_cs = ZOOM_SMSC911X_CS; if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); return; } - zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - eth_gpio = ZOOM2_SMSC911X_GPIO; + eth_gpio = ZOOM_SMSC911X_GPIO; - zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); if (gpio_request(eth_gpio, "smsc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", @@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = { } }; -static struct platform_device zoom2_debugboard_serial_device = { +static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", .id = 3, .dev = { @@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = { }, }; -static inline void __init zoom2_init_quaduart(void) +static inline void __init zoom_init_quaduart(void) { int quart_cs; unsigned long cs_mem_base; int quart_gpio = 0; - quart_cs = ZOOM2_QUADUART_CS; + quart_cs = ZOOM_QUADUART_CS; if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem" @@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void) return; } - quart_gpio = ZOOM2_QUADUART_GPIO; + quart_gpio = ZOOM_QUADUART_GPIO; if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", @@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void) gpio_direction_input(quart_gpio); } -static inline int omap_zoom2_debugboard_detect(void) +static inline int omap_zoom_debugboard_detect(void) { int debug_board_detect = 0; int ret = 1; - debug_board_detect = ZOOM2_SMSC911X_GPIO; + debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } @@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void) return ret; } -static struct platform_device *zoom2_devices[] __initdata = { - &zoom2_smsc911x_device, - &zoom2_debugboard_serial_device, +static struct platform_device *zoom_devices[] __initdata = { + &zoom_smsc911x_device, + &zoom_debugboard_serial_device, }; -int __init omap_zoom2_debugboard_init(void) +int __init zoom_debugboard_init(void) { - if (!omap_zoom2_debugboard_detect()) + if (!omap_zoom_debugboard_detect()) return 0; - zoom2_init_smsc911x(); - zoom2_init_quaduart(); - return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); + zoom_init_smsc911x(); + zoom_init_quaduart(); + return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); } |