diff options
Diffstat (limited to 'arch/arm/mach-ep93xx')
| -rw-r--r-- | arch/arm/mach-ep93xx/Kconfig | 20 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/Makefile | 11 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/clock.c | 733 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/core.c | 1018 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/dma.c | 114 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/edb93xx.c | 368 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/ep93xx-regs.h | 38 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/hardware.h | 25 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/irqs.h | 76 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/platform.h | 42 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/soc.h | 212 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/timer-ep93xx.c | 143 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/ts72xx.c | 422 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/ts72xx.h | 94 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/vision_ep9307.c | 321 |
16 files changed, 10 insertions, 3738 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 703f3d232a60..812b71dcf60e 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -3,27 +3,27 @@ menuconfig ARCH_EP93XX bool "EP93xx-based" depends on ATAGS depends on ARCH_MULTI_V4T + # CONFIG_ARCH_MULTI_V7 is not set depends on CPU_LITTLE_ENDIAN + select ARCH_HAS_RESET_CONTROLLER select ARCH_SPARSEMEM_ENABLE select ARM_AMBA select ARM_VIC + select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node + select COMMON_CLK_EP93XX + select EP93XX_TIMER select CLKSRC_MMIO select CPU_ARM920T select GPIOLIB + select PINCTRL + select PINCTRL_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. if ARCH_EP93XX -menu "Cirrus EP93xx Implementation Options" - -config EP93XX_SOC_COMMON - bool - default y - select SOC_BUS - select LEDS_GPIO_REGISTER - -comment "EP93xx Platforms" +# menu "EP93xx Platforms" config MACH_BK3 bool "Support Liebherr BK3.1" @@ -103,6 +103,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -endmenu +# endmenu endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile deleted file mode 100644 index 62e37403df14..000000000000 --- a/arch/arm/mach-ep93xx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# -obj-y := core.o clock.o timer-ep93xx.o - -obj-$(CONFIG_EP93XX_DMA) += dma.o - -obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o -obj-$(CONFIG_MACH_TS72XX) += ts72xx.o -obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c deleted file mode 100644 index 85a496ddc619..000000000000 --- a/arch/arm/mach-ep93xx/clock.c +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/clock.c - * Clock control for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "hardware.h" - -#include <asm/div64.h> - -#include "soc.h" - -static DEFINE_SPINLOCK(clk_lock); - -static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; -static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; -static char pclk_divisors[] = { 1, 2, 4, 8 }; - -static char adc_divisors[] = { 16, 4 }; -static char sclk_divisors[] = { 2, 4 }; -static char lrclk_divisors[] = { 32, 64, 128 }; - -static const char * const mux_parents[] = { - "xtali", - "pll1", - "pll2" -}; - -/* - * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS - */ -static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word) -{ - int i; - - rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ - rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ - do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ - for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ - rate >>= 1; - - return (unsigned long)rate; -} - -struct clk_psc { - struct clk_hw hw; - void __iomem *reg; - u8 bit_idx; - u32 mask; - u8 shift; - u8 width; - char *div; - u8 num_div; - spinlock_t *lock; -}; - -#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) - -static int ep93xx_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = readl(psc->reg); - - return (val & BIT(psc->bit_idx)) ? 1 : 0; -} - -static int ep93xx_clk_enable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val |= BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static void ep93xx_clk_disable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); -} - -static const struct clk_ops clk_ep93xx_gate_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, -}; - -static struct clk_hw *ep93xx_clk_register_gate(const char *name, - const char *parent_name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ep93xx_gate_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->hw.init = &init; - psc->lock = &clk_lock; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - - return &psc->hw; -} - -static u8 ep93xx_mux_get_parent(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - - if (!(val & EP93XX_SYSCON_CLKDIV_ESEL)) - return 0; - - if (!(val & EP93XX_SYSCON_CLKDIV_PSEL)) - return 1; - - return 2; -} - -static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (index >= ARRAY_SIZE(mux_parents)) - return -EINVAL; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL); - - - if (index != 0) { - val |= EP93XX_SYSCON_CLKDIV_ESEL; - val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0; - } - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static bool is_best(unsigned long rate, unsigned long now, - unsigned long best) -{ - return abs(rate - now) < abs(rate - best); -} - -static int ep93xx_mux_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - unsigned long rate = req->rate; - struct clk *best_parent = NULL; - unsigned long __parent_rate; - unsigned long best_rate = 0, actual_rate, mclk_rate; - unsigned long best_parent_rate; - int __div = 0, __pdiv = 0; - int i; - - /* - * Try the two pll's and the external clock - * Because the valid predividers are 2, 2.5 and 3, we multiply - * all the clocks by 2 to avoid floating point math. - * - * This is based on the algorithm in the ep93xx raster guide: - * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf - * - */ - for (i = 0; i < ARRAY_SIZE(mux_parents); i++) { - struct clk *parent = clk_get_sys(mux_parents[i], NULL); - - __parent_rate = clk_get_rate(parent); - mclk_rate = __parent_rate * 2; - - /* Try each predivider value */ - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - best_rate = actual_rate; - best_parent_rate = __parent_rate; - best_parent = parent; - } - } - } - - if (!best_parent) - return -EINVAL; - - req->best_parent_rate = best_parent_rate; - req->best_parent_hw = __clk_get_hw(best_parent); - req->rate = best_rate; - - return 0; -} - -static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long rate = 0; - u32 val = __raw_readl(psc->reg); - int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03); - int __div = val & 0x7f; - - if (__div > 0) - rate = (parent_rate * 2) / ((__pdiv + 3) * __div); - - return rate; -} - -static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - int pdiv = 0, div = 0; - unsigned long best_rate = 0, actual_rate, mclk_rate; - int __div = 0, __pdiv = 0; - u32 val; - - mclk_rate = parent_rate * 2; - - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - pdiv = __pdiv - 3; - div = __div; - best_rate = actual_rate; - } - } - - if (!best_rate) - return -EINVAL; - - val = __raw_readl(psc->reg); - - /* Clear old dividers */ - val &= ~0x37f; - - /* Set the new pdiv and div bits for the new clock rate */ - val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops clk_ddiv_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .get_parent = ep93xx_mux_get_parent, - .set_parent = ep93xx_mux_set_parent_lock, - .determine_rate = ep93xx_mux_determine_rate, - .recalc_rate = ep93xx_ddiv_recalc_rate, - .set_rate = ep93xx_ddiv_set_rate, -}; - -static struct clk_hw *clk_hw_register_ddiv(const char *name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ddiv_ops; - init.flags = 0; - init.parent_names = mux_parents; - init.num_parents = ARRAY_SIZE(mux_parents); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - u8 index = (val & psc->mask) >> psc->shift; - - if (index > psc->num_div) - return 0; - - return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); -} - -static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long best = 0, now, maxdiv; - int i; - - maxdiv = psc->div[psc->num_div - 1]; - - for (i = 0; i < psc->num_div; i++) { - if ((rate * psc->div[i]) == *parent_rate) - return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - if (is_best(rate, now, best)) - best = now; - } - - if (!best) - best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv); - - return best; -} - -static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg) & ~psc->mask; - int i; - - for (i = 0; i < psc->num_div; i++) - if (rate == parent_rate / psc->div[i]) { - val |= i << psc->shift; - break; - } - - if (i == psc->num_div) - return -EINVAL; - - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops ep93xx_div_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .recalc_rate = ep93xx_div_recalc_rate, - .round_rate = ep93xx_div_round_rate, - .set_rate = ep93xx_div_set_rate, -}; - -static struct clk_hw *clk_hw_register_div(const char *name, - const char *parent_name, - void __iomem *reg, - u8 enable_bit, - u8 shift, - u8 width, - char *clk_divisors, - u8 num_div) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &ep93xx_div_ops; - init.flags = 0; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = 1; - - psc->reg = reg; - psc->bit_idx = enable_bit; - psc->mask = GENMASK(shift + width - 1, shift); - psc->shift = shift; - psc->div = clk_divisors; - psc->num_div = num_div; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -struct ep93xx_gate { - unsigned int bit; - const char *dev_id; - const char *con_id; -}; - -static struct ep93xx_gate ep93xx_uarts[] = { - {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL}, - {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL}, - {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL}, -}; - -static void __init ep93xx_uart_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - u32 value; - unsigned int clk_uart_div; - - value = __raw_readl(EP93XX_SYSCON_PWRCNT); - if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - clk_uart_div = 1; - else - clk_uart_div = 2; - - hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div); - - /* parenting uart gate clocks to uart clock */ - for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) { - hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id, - "uart", - EP93XX_SYSCON_DEVCFG, - ep93xx_uarts[i].bit); - - clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id); - } -} - -static struct ep93xx_gate ep93xx_dmas[] = { - {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"}, -}; - -static void __init ep93xx_dma_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - int ret; - - for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) { - hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id, - "hclk", 0, - EP93XX_SYSCON_PWRCNT, - ep93xx_dmas[i].bit, - 0, - &clk_lock); - - ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL); - if (ret) - pr_err("%s: failed to register lookup %s\n", - __func__, ep93xx_dmas[i].con_id); - } -} - -static int __init ep93xx_clock_init(void) -{ - u32 value; - struct clk_hw *hw; - unsigned long clk_pll1_rate; - unsigned long clk_f_rate; - unsigned long clk_h_rate; - unsigned long clk_p_rate; - unsigned long clk_pll2_rate; - unsigned int clk_f_div; - unsigned int clk_h_div; - unsigned int clk_p_div; - unsigned int clk_usb_div; - unsigned long clk_spi_div; - - hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE); - clk_hw_register_clkdev(hw, NULL, "xtali"); - - /* Determine the bootloader configured pll1 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET1); - if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) - clk_pll1_rate = EP93XX_EXT_CLK_RATE; - else - clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - - hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate); - clk_hw_register_clkdev(hw, NULL, "pll1"); - - /* Initialize the pll1 derived clocks */ - clk_f_div = fclk_divisors[(value >> 25) & 0x7]; - clk_h_div = hclk_divisors[(value >> 20) & 0x7]; - clk_p_div = pclk_divisors[(value >> 18) & 0x3]; - - hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div); - clk_f_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div); - clk_h_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div); - clk_p_rate = clk_get_rate(hw->clk); - - clk_hw_register_clkdev(hw, "apb_pclk", NULL); - - ep93xx_dma_clock_init(); - - /* Determine the bootloader configured pll2 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET2); - if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) - clk_pll2_rate = EP93XX_EXT_CLK_RATE; - else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) - clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - else - clk_pll2_rate = 0; - - hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate); - clk_hw_register_clkdev(hw, NULL, "pll2"); - - /* Initialize the pll2 derived clocks */ - /* - * These four bits set the divide ratio between the PLL2 - * output and the USB clock. - * 0000 - Divide by 1 - * 0001 - Divide by 2 - * 0010 - Divide by 3 - * 0011 - Divide by 4 - * 0100 - Divide by 5 - * 0101 - Divide by 6 - * 0110 - Divide by 7 - * 0111 - Divide by 8 - * 1000 - Divide by 9 - * 1001 - Divide by 10 - * 1010 - Divide by 11 - * 1011 - Divide by 12 - * 1100 - Divide by 13 - * 1101 - Divide by 14 - * 1110 - Divide by 15 - * 1111 - Divide by 1 - * On power-on-reset these bits are reset to 0000b. - */ - clk_usb_div = (((value >> 28) & 0xf) + 1); - hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div); - hw = clk_hw_register_gate(NULL, "ohci-platform", - "usb_clk", 0, - EP93XX_SYSCON_PWRCNT, - EP93XX_SYSCON_PWRCNT_USH_EN, - 0, - &clk_lock); - clk_hw_register_clkdev(hw, NULL, "ohci-platform"); - - /* - * EP93xx SSP clock rate was doubled in version E2. For more information - * see: - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - clk_spi_div = 1; - if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) - clk_spi_div = 2; - hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div); - clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0"); - - /* pwm clock */ - hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1); - clk_hw_register_clkdev(hw, "pwm_clk", NULL); - - pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", - clk_pll1_rate / 1000000, clk_pll2_rate / 1000000); - pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", - clk_f_rate / 1000000, clk_h_rate / 1000000, - clk_p_rate / 1000000); - - ep93xx_uart_clock_init(); - - /* touchscreen/adc clock */ - hw = clk_hw_register_div("ep93xx-adc", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_TSEN, - EP93XX_SYSCON_KEYTCHCLKDIV_ADIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-adc"); - - /* keypad clock */ - hw = clk_hw_register_div("ep93xx-keypad", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_KEN, - EP93XX_SYSCON_KEYTCHCLKDIV_KDIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad"); - - /* On reset PDIV and VDIV is set to zero, while PDIV zero - * means clock disable, VDIV shouldn't be zero. - * So i set both dividers to minimum. - */ - /* ENA - Enable CLK divider. */ - /* PDIV - 00 - Disable clock */ - /* VDIV - at least 2 */ - /* Check and enable video clk registers */ - value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV); - - /* check and enable i2s clk registers */ - value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV); - - /* video clk */ - hw = clk_hw_register_ddiv("ep93xx-fb", - EP93XX_SYSCON_VIDCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-fb"); - - /* i2s clk */ - hw = clk_hw_register_ddiv("mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s"); - - /* i2s sclk */ -#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16 -#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1 - hw = clk_hw_register_div("sclk", - "mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_SDIV_SHIFT, - EP93XX_I2SCLKDIV_SDIV_WIDTH, - sclk_divisors, - ARRAY_SIZE(sclk_divisors)); - - clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s"); - - /* i2s lrclk */ -#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17 -#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3 - hw = clk_hw_register_div("lrclk", - "sclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_LRDIV32_SHIFT, - EP93XX_I2SCLKDIV_LRDIV32_WIDTH, - lrclk_divisors, - ARRAY_SIZE(lrclk_divisors)); - - clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s"); - - return 0; -} -postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c deleted file mode 100644 index 8b1ec60a9a46..000000000000 --- a/arch/arm/mach-ep93xx/core.c +++ /dev/null @@ -1,1018 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/core.c - * Core routines for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * Thanks go to Michael Burian and Ray Lehtiniemi for their key - * role in the ep93xx linux community. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/sys_soc.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/uaccess.h> -#include <linux/termios.h> -#include <linux/amba/bus.h> -#include <linux/amba/serial.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/gpio/machine.h> -#include <linux/spi/spi.h> -#include <linux/export.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/reboot.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/random.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/keypad-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "gpio-ep93xx.h" - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "soc.h" -#include "irqs.h" - -/************************************************************************* - * Static I/O mappings that are needed for all EP93xx platforms - *************************************************************************/ -static struct map_desc ep93xx_io_desc[] __initdata = { - { - .virtual = EP93XX_AHB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), - .length = EP93XX_AHB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = EP93XX_APB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), - .length = EP93XX_APB_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init ep93xx_map_io(void) -{ - iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); -} - -/************************************************************************* - * EP93xx IRQ handling - *************************************************************************/ -void __init ep93xx_init_irq(void) -{ - vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0); -} - - -/************************************************************************* - * EP93xx System Controller Software Locked register handling - *************************************************************************/ - -/* - * syscon_swlock prevents anything else from writing to the syscon - * block while a software locked register is being written. - */ -static DEFINE_SPINLOCK(syscon_swlock); - -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) -{ - unsigned long flags; - - spin_lock_irqsave(&syscon_swlock, flags); - - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, reg); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&syscon_swlock, flags); - - val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val &= ~clear_bits; - val |= set_bits; - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, EP93XX_SYSCON_DEVCFG); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -/** - * ep93xx_chip_revision() - returns the EP93xx chip revision - * - * See "platform.h" for more information. - */ -unsigned int ep93xx_chip_revision(void) -{ - unsigned int v; - - v = __raw_readl(EP93XX_SYSCON_SYSCFG); - v &= EP93XX_SYSCON_SYSCFG_REV_MASK; - v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; - return v; -} -EXPORT_SYMBOL_GPL(ep93xx_chip_revision); - -/************************************************************************* - * EP93xx GPIO - *************************************************************************/ -static struct resource ep93xx_gpio_resource[] = { - DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), -}; - -static struct platform_device ep93xx_gpio_device = { - .name = "gpio-ep93xx", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), - .resource = ep93xx_gpio_resource, -}; - -/************************************************************************* - * EP93xx peripheral handling - *************************************************************************/ -#define EP93XX_UART_MCR_OFFSET (0x0100) - -static void ep93xx_uart_set_mctrl(struct amba_device *dev, - void __iomem *base, unsigned int mctrl) -{ - unsigned int mcr; - - mcr = 0; - if (mctrl & TIOCM_RTS) - mcr |= 2; - if (mctrl & TIOCM_DTR) - mcr |= 1; - - __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); -} - -static struct amba_pl010_data ep93xx_uart_data = { - .set_mctrl = ep93xx_uart_set_mctrl, -}; - -static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, - { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); - -static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, - { IRQ_EP93XX_UART2 }, NULL); - -static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, - { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); - -static struct resource ep93xx_rtc_resource[] = { - DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), -}; - -static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), - .resource = ep93xx_rtc_resource, -}; - -/************************************************************************* - * EP93xx OHCI USB Host - *************************************************************************/ - -static struct clk *ep93xx_ohci_host_clock; - -static int ep93xx_ohci_power_on(struct platform_device *pdev) -{ - if (!ep93xx_ohci_host_clock) { - ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(ep93xx_ohci_host_clock)) - return PTR_ERR(ep93xx_ohci_host_clock); - } - - return clk_prepare_enable(ep93xx_ohci_host_clock); -} - -static void ep93xx_ohci_power_off(struct platform_device *pdev) -{ - clk_disable(ep93xx_ohci_host_clock); -} - -static struct usb_ohci_pdata ep93xx_ohci_pdata = { - .power_on = ep93xx_ohci_power_on, - .power_off = ep93xx_ohci_power_off, - .power_suspend = ep93xx_ohci_power_off, -}; - -static struct resource ep93xx_ohci_resources[] = { - DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), - DEFINE_RES_IRQ(IRQ_EP93XX_USB), -}; - -static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_ohci_device = { - .name = "ohci-platform", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, - .dev = { - .dma_mask = &ep93xx_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ep93xx_ohci_pdata, - }, -}; - -/************************************************************************* - * EP93xx physmap'ed flash - *************************************************************************/ -static struct physmap_flash_data ep93xx_flash_data; - -static struct resource ep93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ep93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ep93xx_flash_data, - }, - .num_resources = 1, - .resource = &ep93xx_flash_resource, -}; - -/** - * ep93xx_register_flash() - Register the external flash device. - * @width: bank width in octets - * @start: resource start address - * @size: resource size - */ -void __init ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - ep93xx_flash_data.width = width; - - ep93xx_flash_resource.start = start; - ep93xx_flash_resource.end = start + size - 1; - - platform_device_register(&ep93xx_flash); -} - - -/************************************************************************* - * EP93xx ethernet peripheral handling - *************************************************************************/ -static struct ep93xx_eth_data ep93xx_eth_data; - -static struct resource ep93xx_eth_resource[] = { - DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), - DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), -}; - -static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_eth_device = { - .name = "ep93xx-eth", - .id = -1, - .dev = { - .platform_data = &ep93xx_eth_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_eth_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_eth_resource), - .resource = ep93xx_eth_resource, -}; - -/** - * ep93xx_register_eth - Register the built-in ethernet platform device. - * @data: platform specific ethernet configuration (__initdata) - * @copy_addr: flag indicating that the MAC address should be copied - * from the IndAd registers (as programmed by the bootloader) - */ -void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) -{ - if (copy_addr) - memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); - - ep93xx_eth_data = *data; - platform_device_register(&ep93xx_eth_device); -} - - -/************************************************************************* - * EP93xx i2c peripheral handling - *************************************************************************/ - -/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ -static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("G", 1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("G", 0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/** - * ep93xx_register_i2c - Register the i2c platform device. - * @devices: platform specific i2c bus device information (__initdata) - * @num: the number of devices on the i2c bus - */ -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) -{ - /* - * FIXME: this just sets the two pins as non-opendrain, as no - * platforms tries to do that anyway. Flag the applicable lines - * as open drain in the GPIO_LOOKUP above and the driver or - * gpiolib will handle open drain/open drain emulation as need - * be. Right now i2c-gpio emulates open drain which is not - * optimal. - */ - __raw_writel((0 << 1) | (0 << 0), - EP93XX_GPIO_EEDRIVE); - - i2c_register_board_info(0, devices, num); - gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); - platform_device_register(&ep93xx_i2c_device); -} - -/************************************************************************* - * EP93xx SPI peripheral handling - *************************************************************************/ -static struct ep93xx_spi_info ep93xx_spi_master_data; - -static struct resource ep93xx_spi_resources[] = { - DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), - DEFINE_RES_IRQ(IRQ_EP93XX_SSP), -}; - -static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_spi_device = { - .name = "ep93xx-spi", - .id = 0, - .dev = { - .platform_data = &ep93xx_spi_master_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_spi_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_spi_resources), - .resource = ep93xx_spi_resources, -}; - -/** - * ep93xx_register_spi() - registers spi platform device - * @info: ep93xx board specific spi master info (__initdata) - * @devices: SPI devices to register (__initdata) - * @num: number of SPI devices to register - * - * This function registers platform device for the EP93xx SPI controller and - * also makes sure that SPI pins are muxed so that I2S is not using those pins. - */ -void __init ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num) -{ - /* - * When SPI is used, we need to make sure that I2S is muxed off from - * SPI pins. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); - - ep93xx_spi_master_data = *info; - spi_register_board_info(devices, num); - platform_device_register(&ep93xx_spi_device); -} - -/************************************************************************* - * EP93xx LEDs - *************************************************************************/ -static const struct gpio_led ep93xx_led_pins[] __initconst = { - { - .name = "platform:grled", - }, { - .name = "platform:rdled", - }, -}; - -static const struct gpio_led_platform_data ep93xx_led_data __initconst = { - .num_leds = ARRAY_SIZE(ep93xx_led_pins), - .leds = ep93xx_led_pins, -}; - -static struct gpiod_lookup_table ep93xx_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - /* Use local offsets on gpiochip/port "E" */ - GPIO_LOOKUP_IDX("E", 0, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("E", 1, NULL, 1, GPIO_ACTIVE_HIGH), - { } - }, -}; - -/************************************************************************* - * EP93xx pwm peripheral handling - *************************************************************************/ -static struct resource ep93xx_pwm0_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), -}; - -static struct platform_device ep93xx_pwm0_device = { - .name = "ep93xx-pwm", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), - .resource = ep93xx_pwm0_resource, -}; - -static struct resource ep93xx_pwm1_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), -}; - -static struct platform_device ep93xx_pwm1_device = { - .name = "ep93xx-pwm", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), - .resource = ep93xx_pwm1_resource, -}; - -void __init ep93xx_register_pwm(int pwm0, int pwm1) -{ - if (pwm0) - platform_device_register(&ep93xx_pwm0_device); - - /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ - if (pwm1) - platform_device_register(&ep93xx_pwm1_device); -} - -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) -{ - int err; - - if (pdev->id == 0) { - err = 0; - } else if (pdev->id == 1) { - err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, - dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); - if (err) - goto fail; - - /* PWM 1 output on EGPIO[14] */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); - } else { - err = -ENODEV; - } - - return err; - -fail: - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - return err; -} -EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); - -void ep93xx_pwm_release_gpio(struct platform_device *pdev) -{ - if (pdev->id == 1) { - gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - - /* EGPIO[14] used for GPIO */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); - } -} -EXPORT_SYMBOL(ep93xx_pwm_release_gpio); - - -/************************************************************************* - * EP93xx video peripheral handling - *************************************************************************/ -static struct ep93xxfb_mach_info ep93xxfb_data; - -static struct resource ep93xx_fb_resource[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), -}; - -static struct platform_device ep93xx_fb_device = { - .name = "ep93xx-fb", - .id = -1, - .dev = { - .platform_data = &ep93xxfb_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_fb_resource), - .resource = ep93xx_fb_resource, -}; - -/* The backlight use a single register in the framebuffer's register space */ -#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 - -static struct resource ep93xx_bl_resources[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + - EP93XX_RASTER_REG_BRIGHTNESS, 0x04), -}; - -static struct platform_device ep93xx_bl_device = { - .name = "ep93xx-bl", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_bl_resources), - .resource = ep93xx_bl_resources, -}; - -/** - * ep93xx_register_fb - Register the framebuffer platform device. - * @data: platform specific framebuffer configuration (__initdata) - */ -void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) -{ - ep93xxfb_data = *data; - platform_device_register(&ep93xx_fb_device); - platform_device_register(&ep93xx_bl_device); -} - - -/************************************************************************* - * EP93xx matrix keypad peripheral handling - *************************************************************************/ -static struct ep93xx_keypad_platform_data ep93xx_keypad_data; - -static struct resource ep93xx_keypad_resource[] = { - DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), - DEFINE_RES_IRQ(IRQ_EP93XX_KEY), -}; - -static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .dev = { - .platform_data = &ep93xx_keypad_data, - }, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, -}; - -/** - * ep93xx_register_keypad - Register the keypad platform device. - * @data: platform specific keypad configuration (__initdata) - */ -void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) -{ - ep93xx_keypad_data = *data; - platform_device_register(&ep93xx_keypad_device); -} - -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_c; - err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_d; - } - - /* Enable the keypad controller; GPIO ports C and D used for keypad */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); - - return 0; - -fail_gpio_d: - gpio_free(EP93XX_GPIO_LINE_C(i)); -fail_gpio_c: - for (--i; i >= 0; --i) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - return err; -} -EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); - -void ep93xx_keypad_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 0; i < 8; i++) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - - /* Disable the keypad controller; GPIO ports C and D used for GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); -} -EXPORT_SYMBOL(ep93xx_keypad_release_gpio); - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ(IRQ_EP93XX_SAI), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -static struct platform_device ep93xx_pcm_device = { - .name = "ep93xx-pcm-audio", - .id = -1, -}; - -void __init ep93xx_register_i2s(void) -{ - platform_device_register(&ep93xx_i2s_device); - platform_device_register(&ep93xx_pcm_device); -} - -#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ - EP93XX_SYSCON_DEVCFG_I2SONAC97) - -#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ - EP93XX_SYSCON_I2SCLKDIV_SPOL) - -int ep93xx_i2s_acquire(void) -{ - unsigned val; - - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, - EP93XX_SYSCON_DEVCFG_I2S_MASK); - - /* - * This is potentially racy with the clock api for i2s_mclk, sclk and - * lrclk. Since the i2s driver is the only user of those clocks we - * rely on it to prevent parallel use of this function and the - * clock api for the i2s clocks. - */ - val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - val &= ~EP93XX_I2SCLKDIV_MASK; - val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; - ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); - - return 0; -} -EXPORT_SYMBOL(ep93xx_i2s_acquire); - -void ep93xx_i2s_release(void) -{ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); -} -EXPORT_SYMBOL(ep93xx_i2s_release); - -/************************************************************************* - * EP93xx AC97 audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_ac97_resources[] = { - DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), - DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), -}; - -static struct platform_device ep93xx_ac97_device = { - .name = "ep93xx-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ac97_resources), - .resource = ep93xx_ac97_resources, -}; - -void __init ep93xx_register_ac97(void) -{ - /* - * Make sure that the AC97 pins are not used by I2S. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - - platform_device_register(&ep93xx_ac97_device); - platform_device_register(&ep93xx_pcm_device); -} - -/************************************************************************* - * EP93xx Watchdog - *************************************************************************/ -static struct resource ep93xx_wdt_resources[] = { - DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), -}; - -static struct platform_device ep93xx_wdt_device = { - .name = "ep93xx-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), - .resource = ep93xx_wdt_resources, -}; - -/************************************************************************* - * EP93xx IDE - *************************************************************************/ -static struct resource ep93xx_ide_resources[] = { - DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), - DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), -}; - -static struct platform_device ep93xx_ide_device = { - .name = "ep93xx-ide", - .id = -1, - .dev = { - .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ep93xx_ide_resources), - .resource = ep93xx_ide_resources, -}; - -void __init ep93xx_register_ide(void) -{ - platform_device_register(&ep93xx_ide_device); -} - -int ep93xx_ide_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); - if (err) - goto fail_egpio15; - for (i = 2; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_e; - } - for (i = 4; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_g; - } - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_h; - } - - /* GPIO ports E[7:2], G[7:4] and H used by IDE */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - return 0; - -fail_gpio_h: - for (--i; i >= 0; --i) - gpio_free(EP93XX_GPIO_LINE_H(i)); - i = 8; -fail_gpio_g: - for (--i; i >= 4; --i) - gpio_free(EP93XX_GPIO_LINE_G(i)); - i = 8; -fail_gpio_e: - for (--i; i >= 2; --i) - gpio_free(EP93XX_GPIO_LINE_E(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); -fail_egpio15: - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - return err; -} -EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); - -void ep93xx_ide_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 2; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_E(i)); - for (i = 4; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_G(i)); - for (i = 0; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_H(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - - - /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); -} -EXPORT_SYMBOL(ep93xx_ide_release_gpio); - -/************************************************************************* - * EP93xx ADC - *************************************************************************/ -static struct resource ep93xx_adc_resources[] = { - DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28), - DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH), -}; - -static struct platform_device ep93xx_adc_device = { - .name = "ep93xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_adc_resources), - .resource = ep93xx_adc_resources, -}; - -void __init ep93xx_register_adc(void) -{ - /* Power up ADC, deactivate Touch Screen Controller */ - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN, - EP93XX_SYSCON_DEVCFG_ADCPD); - - platform_device_register(&ep93xx_adc_device); -} - -/************************************************************************* - * EP93xx Security peripheral - *************************************************************************/ - -/* - * The Maverick Key is 256 bits of micro fuses blown at the factory during - * manufacturing to uniquely identify a part. - * - * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key - */ -#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) -#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400) -#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410) -#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) -#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450) -#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460) -#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500) -#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504) -#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520) -#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524) -#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700) -#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704) -#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708) -#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c) - -static char ep93xx_soc_id[33]; - -static const char __init *ep93xx_get_soc_id(void) -{ - unsigned int id, id2, id3, id4, id5; - - if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1) - return "bad Hamming code"; - - id = __raw_readl(EP93XX_SECURITY_UNIQID); - id2 = __raw_readl(EP93XX_SECURITY_UNIQID2); - id3 = __raw_readl(EP93XX_SECURITY_UNIQID3); - id4 = __raw_readl(EP93XX_SECURITY_UNIQID4); - id5 = __raw_readl(EP93XX_SECURITY_UNIQID5); - - if (id != id2) - return "invalid"; - - /* Toss the unique ID into the entropy pool */ - add_device_randomness(&id2, 4); - add_device_randomness(&id3, 4); - add_device_randomness(&id4, 4); - add_device_randomness(&id5, 4); - - snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), - "%08x%08x%08x%08x", id2, id3, id4, id5); - - return ep93xx_soc_id; -} - -static const char __init *ep93xx_get_soc_rev(void) -{ - int rev = ep93xx_chip_revision(); - - switch (rev) { - case EP93XX_CHIP_REV_D0: - return "D0"; - case EP93XX_CHIP_REV_D1: - return "D1"; - case EP93XX_CHIP_REV_E0: - return "E0"; - case EP93XX_CHIP_REV_E1: - return "E1"; - case EP93XX_CHIP_REV_E2: - return "E2"; - default: - return "unknown"; - } -} - -static const char __init *ep93xx_get_machine_name(void) -{ - return kasprintf(GFP_KERNEL,"%s", machine_desc->name); -} - -static struct device __init *ep93xx_init_soc(void) -{ - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return NULL; - - soc_dev_attr->machine = ep93xx_get_machine_name(); - soc_dev_attr->family = "Cirrus Logic EP93xx"; - soc_dev_attr->revision = ep93xx_get_soc_rev(); - soc_dev_attr->soc_id = ep93xx_get_soc_id(); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->machine); - kfree(soc_dev_attr); - return NULL; - } - - return soc_device_to_device(soc_dev); -} - -struct device __init *ep93xx_init_devices(void) -{ - struct device *parent; - - /* Disallow access to MaverickCrunch initially */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - - /* Default all ports to GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - parent = ep93xx_init_soc(); - - /* Get the GPIO working early, other devices need it */ - platform_device_register(&ep93xx_gpio_device); - - amba_device_register(&uart1_device, &iomem_resource); - amba_device_register(&uart2_device, &iomem_resource); - amba_device_register(&uart3_device, &iomem_resource); - - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_wdt_device); - - gpiod_add_lookup_table(&ep93xx_leds_gpio_table); - gpio_led_register_device(-1, &ep93xx_led_data); - - return parent; -} - -void ep93xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Set then clear the SWRST bit to initiate a software reset - */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); - - while (1) - ; -} diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c deleted file mode 100644 index 74515acab8ef..000000000000 --- a/arch/arm/mach-ep93xx/dma.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/dma.c - * - * Platform support code for the EP93xx dmaengine driver. - * - * Copyright (C) 2011 Mika Westerberg - * - * This work is based on the original dma-m2p implementation with - * following copyrights: - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> - */ - -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/platform_data/dma-ep93xx.h> -#include "hardware.h" - -#include "soc.h" - -#define DMA_CHANNEL(_name, _base, _irq) \ - { .name = (_name), .base = (_base), .irq = (_irq) } - -/* - * DMA M2P channels. - * - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { - DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), - DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), - DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), - DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), - DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), - DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), - DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), - DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), - DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), - DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { - .channels = ep93xx_dma_m2p_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), -}; - -static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2p_device = { - .name = "ep93xx-dma-m2p", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2p_data, - .dma_mask = &ep93xx_dma_m2p_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* - * DMA M2M channels. - * - * There are 2 M2M channels which support memcpy/memset and in addition simple - * hardware requests from/to SSP and IDE. We do not implement an external - * hardware requests. - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { - DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), - DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { - .channels = ep93xx_dma_m2m_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), -}; - -static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2m_device = { - .name = "ep93xx-dma-m2m", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2m_data, - .dma_mask = &ep93xx_dma_m2m_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static int __init ep93xx_dma_init(void) -{ - platform_device_register(&ep93xx_dma_m2p_device); - platform_device_register(&ep93xx_dma_m2m_device); - return 0; -} -arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c deleted file mode 100644 index dbdb822a0100..000000000000 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/edb93xx.c - * Cirrus Logic EDB93xx Development Board support. - * - * EDB93XX, EDB9301, EDB9307A - * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com> - * - * EDB9302 - * Copyright (C) 2006 George Kashperko <george@chas.com.ua> - * - * EDB9302A, EDB9315, EDB9315A - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * EDB9307 - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * EDB9312 - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain <toufeeq_hussain@infosys.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> -#include <linux/gpio/machine.h> - -#include <sound/cs4271.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include "gpio-ep93xx.h" - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "soc.h" - -static void __init edb93xx_register_flash(void) -{ - if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { - ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); - } else { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } -} - -static struct ep93xx_eth_data __initdata edb93xx_eth_data = { - .phy_id = 1, -}; - - -/************************************************************************* - * EDB93xx i2c peripheral handling - *************************************************************************/ - -static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - }, -}; - -static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, -}; - -static void __init edb93xx_register_i2c(void) -{ - if (machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_board_info, - ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9302() || machine_is_edb9307() - || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_board_info, - ARRAY_SIZE(edb93xx_i2c_board_info)); - } -} - - -/************************************************************************* - * EDB93xx SPI peripheral handling - *************************************************************************/ -static struct cs4271_platform_data edb93xx_cs4271_data = { - /* Intentionally left blank */ -}; - -static struct spi_board_info edb93xx_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &edb93xx_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init edb93xx_register_spi(void) -{ - if (machine_is_edb9301() || machine_is_edb9302()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table); - else if (machine_is_edb9302a() || machine_is_edb9307a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table); - else if (machine_is_edb9315a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table); - - gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); - ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, - ARRAY_SIZE(edb93xx_spi_board_info)); -} - - -/************************************************************************* - * EDB93xx I2S - *************************************************************************/ -static struct platform_device edb93xx_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static int __init edb93xx_has_audio(void) -{ - return (machine_is_edb9301() || machine_is_edb9302() || - machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()); -} - -static void __init edb93xx_register_i2s(void) -{ - if (edb93xx_has_audio()) { - ep93xx_register_i2s(); - platform_device_register(&edb93xx_audio_device); - } -} - - -/************************************************************************* - * EDB93xx pwm - *************************************************************************/ -static void __init edb93xx_register_pwm(void) -{ - if (machine_is_edb9301() || - machine_is_edb9302() || machine_is_edb9302a()) { - /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */ - ep93xx_register_pwm(0, 1); - } else if (machine_is_edb9307() || machine_is_edb9307a()) { - /* EP9307 only has pwm.0 (PWMOUT) */ - ep93xx_register_pwm(1, 0); - } else { - /* EP9312 and EP9315 have both */ - ep93xx_register_pwm(1, 1); - } -} - - -/************************************************************************* - * EDB93xx framebuffer - *************************************************************************/ -static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { - .flags = 0, -}; - -static int __init edb93xx_has_fb(void) -{ - /* These platforms have an ep93xx with video capability */ - return machine_is_edb9307() || machine_is_edb9307a() || - machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_fb(void) -{ - if (!edb93xx_has_fb()) - return; - - if (machine_is_edb9307a() || machine_is_edb9315a()) - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0; - else - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3; - - ep93xx_register_fb(&edb93xxfb_info); -} - - -/************************************************************************* - * EDB93xx IDE - *************************************************************************/ -static int __init edb93xx_has_ide(void) -{ - /* - * Although EDB9312 and EDB9315 do have IDE capability, they have - * INTRQ line wired as pull-up, which makes using IDE interface - * problematic. - */ - return machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_ide(void) -{ - if (!edb93xx_has_ide()) - return; - - ep93xx_register_ide(); -} - - -static void __init edb93xx_init_machine(void) -{ - ep93xx_init_devices(); - edb93xx_register_flash(); - ep93xx_register_eth(&edb93xx_eth_data, 1); - edb93xx_register_i2c(); - edb93xx_register_spi(); - edb93xx_register_i2s(); - edb93xx_register_pwm(); - edb93xx_register_fb(); - edb93xx_register_ide(); - ep93xx_register_adc(); -} - - -#ifdef CONFIG_MACH_EDB9301 -MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302 -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko <george@chas.com.ua> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302A -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307 -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307A -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9312 -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315 -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315A -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h deleted file mode 100644 index 8fa3646de0a4..000000000000 --- a/arch/arm/mach-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) -#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - -#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) -#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* APB UARTs */ -#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) -#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) - -#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) -#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) - -#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) -#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) - -#endif diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h deleted file mode 100644 index 7b46eb7e5507..000000000000 --- a/arch/arm/mach-ep93xx/gpio-ep93xx.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Include file for the EP93XX GPIO controller machine specifics */ - -#ifndef __GPIO_EP93XX_H -#define __GPIO_EP93XX_H - -#include "ep93xx-regs.h" - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h deleted file mode 100644 index e7d850e04782..000000000000 --- a/arch/arm/mach-ep93xx/hardware.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/hardware.h - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "platform.h" - -/* - * The EP93xx has two external crystal oscillators. To generate the - * required high-frequency clocks, the processor uses two phase-locked- - * loops (PLLs) to multiply the incoming external clock signal to much - * higher frequencies that are then divided down by programmable dividers - * to produce the needed clocks. The PLLs operate independently of one - * another. - */ -#define EP93XX_EXT_CLK_RATE 14745600 -#define EP93XX_EXT_RTC_RATE 32768 - -#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4) -#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16) - -#endif diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h deleted file mode 100644 index 353201b90c66..000000000000 --- a/arch/arm/mach-ep93xx/irqs.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_VIC0 1 - -#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2) -#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3) -#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4) -#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5) -#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6) -#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7) -#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8) -#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9) -#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10) -#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11) -#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12) -#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13) -#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14) -#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15) -#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16) -#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17) -#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18) -#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19) -#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20) -#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21) -#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22) -#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23) -#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24) -#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25) -#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26) -#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27) -#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28) -#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29) -#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30) -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32) - -#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0) -#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1) -#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2) -#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3) -#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4) -#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5) -#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6) -#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7) -#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8) -#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9) -#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10) -#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11) -#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12) -#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13) -#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14) -#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15) -#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16) -#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17) -#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18) -#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19) -#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20) -#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21) -#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22) -#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23) -#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24) -#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25) -#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26) -#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27) -#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28) -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#endif diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h deleted file mode 100644 index 5fb1b919133f..000000000000 --- a/arch/arm/mach-ep93xx/platform.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/platform.h - */ - -#ifndef __ASSEMBLY__ - -#include <linux/platform_data/eth-ep93xx.h> -#include <linux/reboot.h> - -struct device; -struct i2c_board_info; -struct spi_board_info; -struct platform_device; -struct ep93xxfb_mach_info; -struct ep93xx_keypad_platform_data; -struct ep93xx_spi_info; - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); - -void ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size); - -void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); -void ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num); -void ep93xx_register_fb(struct ep93xxfb_mach_info *data); -void ep93xx_register_pwm(int pwm0, int pwm1); -void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -void ep93xx_register_i2s(void); -void ep93xx_register_ac97(void); -void ep93xx_register_ide(void); -void ep93xx_register_adc(void); - -struct device *ep93xx_init_devices(void); -extern void ep93xx_timer_init(void); - -void ep93xx_restart(enum reboot_mode, const char *); - -#endif diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h deleted file mode 100644 index 3245ebbd5069..000000000000 --- a/arch/arm/mach-ep93xx/soc.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-ep93xx/soc.h - * - * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> - * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> - */ - -#ifndef _EP93XX_SOC_H -#define _EP93XX_SOC_H - -#include "ep93xx-regs.h" -#include "irqs.h" - -/* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000) -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - -/* System controller */ -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN 28 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN 24 -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN 20 -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN 18 -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE 15 -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA 31 -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31 -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - -#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c deleted file mode 100644 index a9efa7bc2fa1..000000000000 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/mach/time.h> -#include "soc.h" -#include "platform.h" - -/************************************************************************* - * Timer handling for EP93xx - ************************************************************************* - * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and - * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate - * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, - * is free-running, and can't generate interrupts. - * - * The 508 kHz timers are ideal for use for the timer interrupt, as the - * most common values of HZ divide 508 kHz nicely. We pick the 32 bit - * timer (timer 3) to get as long sleep intervals as possible when using - * CONFIG_NO_HZ. - * - * The higher clock rate of timer 4 makes it a better choice than the - * other timers for use as clock source and for sched_clock(), providing - * a stable 40 bit time base. - ************************************************************************* - */ -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) -#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) -#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_TIMER123_RATE 508469 -#define EP93XX_TIMER4_RATE 983040 - -static u64 notrace ep93xx_read_sched_clock(void) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return ret; -} - -static u64 ep93xx_clocksource_read(struct clocksource *c) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return (u64) ret; -} - -static int ep93xx_clkevt_set_next_event(unsigned long next, - struct clock_event_device *evt) -{ - /* Default mode: periodic, off, 508 kHz */ - u32 tmode = EP93XX_TIMER123_CONTROL_MODE | - EP93XX_TIMER123_CONTROL_CLKSEL; - - /* Clear timer */ - writel(tmode, EP93XX_TIMER3_CONTROL); - - /* Set next event */ - writel(next, EP93XX_TIMER3_LOAD); - writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, - EP93XX_TIMER3_CONTROL); - return 0; -} - - -static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) -{ - /* Disable timer */ - writel(0, EP93XX_TIMER3_CONTROL); - - return 0; -} - -static struct clock_event_device ep93xx_clockevent = { - .name = "timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = ep93xx_clkevt_shutdown, - .set_state_oneshot = ep93xx_clkevt_shutdown, - .tick_resume = ep93xx_clkevt_shutdown, - .set_next_event = ep93xx_clkevt_set_next_event, - .rating = 300, -}; - -static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Writing any value clears the timer interrupt */ - writel(1, EP93XX_TIMER3_CLEAR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -void __init ep93xx_timer_init(void) -{ - int irq = IRQ_EP93XX_TIMER3; - unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; - - /* Enable and register clocksource and sched_clock on timer 4 */ - writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, - EP93XX_TIMER4_VALUE_HIGH); - clocksource_mmio_init(NULL, "timer4", - EP93XX_TIMER4_RATE, 200, 40, - ep93xx_clocksource_read); - sched_clock_register(ep93xx_read_sched_clock, 40, - EP93XX_TIMER4_RATE); - - /* Set up clockevent on timer 3 */ - if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", - &ep93xx_clockevent)) - pr_err("Failed to request irq %d (ep93xx timer)\n", irq); - clockevents_config_and_register(&ep93xx_clockevent, - EP93XX_TIMER123_RATE, - 1, - 0xffffffffU); -} diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c deleted file mode 100644 index d3de7283ecb3..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/ts72xx.c - * Technologic Systems TS72xx SBC support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/mtd/platnand.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/spi-ep93xx.h> -#include <linux/gpio/machine.h> - -#include "gpio-ep93xx.h" -#include "hardware.h" - -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/mach/arch.h> - -#include "soc.h" -#include "ts72xx.h" - -/************************************************************************* - * IO map - *************************************************************************/ -static struct map_desc ts72xx_io_desc[] __initdata = { - { - .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), - .length = TS72XX_MODEL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), - .length = TS72XX_OPTIONS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), - .length = TS72XX_OPTIONS2_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), - .length = TS72XX_CPLDVER_SIZE, - .type = MT_DEVICE, - } -}; - -static void __init ts72xx_map_io(void) -{ - ep93xx_map_io(); - iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); -} - - -/************************************************************************* - * NAND flash - *************************************************************************/ -#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ -#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ - -static void ts72xx_nand_hwcontrol(struct nand_chip *chip, - int cmd, unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = chip->legacy.IO_ADDR_R; - unsigned char bits; - - addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); - - bits = __raw_readb(addr) & ~0x07; - bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ - bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ - bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ - - __raw_writeb(bits, addr); - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, chip->legacy.IO_ADDR_W); -} - -static int ts72xx_nand_device_ready(struct nand_chip *chip) -{ - void __iomem *addr = chip->legacy.IO_ADDR_R; - - addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); - - return !!(__raw_readb(addr) & 0x20); -} - -#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) -#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) - -static struct mtd_partition ts72xx_nand_parts[] = { - { - .name = "TS-BOOTROM", - .offset = 0, - .size = TS72XX_BOOTROM_PART_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Linux", - .offset = MTDPART_OFS_RETAIN, - .size = TS72XX_REDBOOT_PART_SIZE, - /* leave so much for last partition */ - }, { - .name = "RedBoot", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static struct platform_nand_data ts72xx_nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .chip_delay = 15, - }, - .ctrl = { - .cmd_ctrl = ts72xx_nand_hwcontrol, - .dev_ready = ts72xx_nand_device_ready, - }, -}; - -static struct resource ts72xx_nand_resource[] = { - { - .start = 0, /* filled in later */ - .end = 0, /* filled in later */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts72xx_nand_flash = { - .name = "gen_nand", - .id = -1, - .dev.platform_data = &ts72xx_nand_data, - .resource = ts72xx_nand_resource, - .num_resources = ARRAY_SIZE(ts72xx_nand_resource), -}; - -static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, - resource_size_t start) -{ - /* - * TS7200 has NOR flash all other TS72xx board have NAND flash. - */ - if (board_is_ts7200()) { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } else { - ts72xx_nand_resource[0].start = start; - ts72xx_nand_resource[0].end = start + SZ_16M - 1; - - ts72xx_nand_data.chip.partitions = parts; - ts72xx_nand_data.chip.nr_partitions = n; - - platform_device_register(&ts72xx_nand_flash); - } -} - -/************************************************************************* - * RTC M48T86 - *************************************************************************/ -#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) -#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) - -static struct resource ts72xx_rtc_resources[] = { - DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_rtc_device = { - .name = "rtc-m48t86", - .id = -1, - .resource = ts72xx_rtc_resources, - .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), -}; - -/************************************************************************* - * Watchdog (in CPLD) - *************************************************************************/ -#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) -#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) - -static struct resource ts72xx_wdt_resources[] = { - DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_wdt_device = { - .name = "ts72xx-wdt", - .id = -1, - .resource = ts72xx_wdt_resources, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), -}; - -/************************************************************************* - * ETH - *************************************************************************/ -static struct ep93xx_eth_data __initdata ts72xx_eth_data = { - .phy_id = 1, -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 -#define BK3_EN_SDCARD_PWR 0x0 -#define BK3_DIS_SDCARD_PWR 0x0C -static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) -{ - void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); - - if (!pwr_sd) { - pr_err("Failed to enable SD card power!"); - return; - } - - pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, - !!vdd ? "ON" : "OFF", vdd); - - if (!!vdd) - __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); - else - __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); - - iounmap(pwr_sd); -} - -static struct mmc_spi_platform_data bk3_spi_mmc_data = { - .detect_delay = 500, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_NONREMOVABLE, - .setpower = bk3_mmc_spi_setpower, -}; - -/************************************************************************* - * SPI Bus - SD card access - *************************************************************************/ -static struct spi_board_info bk3_spi_board_info[] __initdata = { - { - .modalias = "mmc_spi", - .platform_data = &bk3_spi_mmc_data, - .max_speed_hz = 7.4E6, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -/* - * This is a stub -> the FGPIO[3] pin is not connected on the schematic - * The all work is performed automatically by !SPI_FRAME (SFRM1) and - * goes through CPLD - */ -static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info bk3_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * TS72XX support code - *************************************************************************/ -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - -/* Relative to EP93XX_CS1_PHYS_BASE */ -#define TS73XX_FPGA_LOADER_BASE 0x03c00000 - -static struct resource ts73xx_fpga_resources[] = { - { - .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, - .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts73xx_fpga_device = { - .name = "ts73xx-fpga-mgr", - .id = -1, - .resource = ts73xx_fpga_resources, - .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), -}; - -#endif - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info ts72xx_spi_devices[] __initdata = { - { - .modalias = "tmp122", - .max_speed_hz = 2 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - /* DIO_17 */ - GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static void __init ts72xx_init_machine(void) -{ - ep93xx_init_devices(); - ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), - is_ts9420_installed() ? - EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); - platform_device_register(&ts72xx_rtc_device); - platform_device_register(&ts72xx_wdt_device); - - ep93xx_register_eth(&ts72xx_eth_data, 1); -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - if (board_is_ts7300()) - platform_device_register(&ts73xx_fpga_device); -#endif - gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); - ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, - ARRAY_SIZE(ts72xx_spi_devices)); -} - -MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = ts72xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-spilink-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -/************************************************************************* - * BK3 support code - *************************************************************************/ -static struct mtd_partition bk3_nand_parts[] = { - { - .name = "System", - .offset = 0x00000000, - .size = 0x01e00000, - }, { - .name = "Data", - .offset = 0x01e00000, - .size = 0x05f20000 - }, { - .name = "RedBoot", - .offset = 0x07d20000, - .size = 0x002e0000, - .mask_flags = MTD_WRITEABLE, /* force RO */ - }, -}; - -static void __init bk3_init_machine(void) -{ - ep93xx_init_devices(); - - ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), - EP93XX_CS6_PHYS_BASE); - - ep93xx_register_eth(&ts72xx_eth_data, 1); - - gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); - ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, - ARRAY_SIZE(bk3_spi_board_info)); - - /* Configure ep93xx's I2S to use AC97 pins */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - platform_device_register(&ep93xx_i2s_device); -} - -MACHINE_START(BK3, "Liebherr controller BK3.1") - /* Maintainer: Lukasz Majewski <lukma@denx.de> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = bk3_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h deleted file mode 100644 index 00b4941d29c9..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register (bits 0-2) - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 23400000 4K CPLD version register - */ - -#ifndef __TS72XX_H_ -#define __TS72XX_H_ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 -#define TS72XX_MODEL_TS7300 0x03 -#define TS72XX_MODEL_TS7400 0x04 -#define TS72XX_MODEL_MASK 0x07 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - -#define TS72XX_CPLDVER_PHYS_BASE 0x23400000 -#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000) -#define TS72XX_CPLDVER_SIZE 0x00001000 - -#ifndef __ASSEMBLY__ - -static inline int ts72xx_model(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; -} - -static inline int board_is_ts7200(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7260; -} - -static inline int board_is_ts7300(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7300; -} - -static inline int board_is_ts7400(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7400; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif -#endif /* __TS72XX_H_ */ diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c deleted file mode 100644 index 9471938df64c..000000000000 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ /dev/null @@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/vision_ep9307.c - * Vision Engraving Systems EP9307 SoM support. - * - * Copyright (C) 2008-2011 Vision Engraving Systems - * H Hartley Sweeten <hsweeten@visionengravers.com> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/fb.h> -#include <linux/io.h> -#include <linux/mtd/partitions.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> - -#include <sound/cs4271.h> - -#include "hardware.h" -#include <linux/platform_data/video-ep93xx.h> -#include <linux/platform_data/spi-ep93xx.h> -#include "gpio-ep93xx.h" - -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/mach/arch.h> - -#include "soc.h" - -/************************************************************************* - * Static I/O mappings for the FPGA - *************************************************************************/ -#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE -#define VISION_VIRT_BASE 0xfebff000 - -static struct map_desc vision_io_desc[] __initdata = { - { - .virtual = VISION_VIRT_BASE, - .pfn = __phys_to_pfn(VISION_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void __init vision_map_io(void) -{ - ep93xx_map_io(); - - iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); -} - -/************************************************************************* - * Ethernet - *************************************************************************/ -static struct ep93xx_eth_data vision_eth_data __initdata = { - .phy_id = 1, -}; - -/************************************************************************* - * Framebuffer - *************************************************************************/ -#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 - -static int vision_lcd_setup(struct platform_device *pdev) -{ - int err; - - err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, - dev_name(&pdev->dev)); - if (err) - return err; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | - EP93XX_SYSCON_DEVCFG_RASONP3 | - EP93XX_SYSCON_DEVCFG_EXVC); - - return 0; -} - -static void vision_lcd_teardown(struct platform_device *pdev) -{ - gpio_free(VISION_LCD_ENABLE); -} - -static void vision_lcd_blank(int blank_mode, struct fb_info *info) -{ - if (blank_mode) - gpio_set_value(VISION_LCD_ENABLE, 0); - else - gpio_set_value(VISION_LCD_ENABLE, 1); -} - -static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { - .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, - .setup = vision_lcd_setup, - .teardown = vision_lcd_teardown, - .blank = vision_lcd_blank, -}; - - -/************************************************************************* - * GPIO Expanders - *************************************************************************/ -#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) -#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) -#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) -#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) - -static struct pca953x_platform_data pca953x_74_gpio_data = { - .gpio_base = PCA9539_74_GPIO_BASE, - .irq_base = EP93XX_BOARD_IRQ(0), -}; - -static struct pca953x_platform_data pca953x_75_gpio_data = { - .gpio_base = PCA9539_75_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_76_gpio_data = { - .gpio_base = PCA9539_76_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_77_gpio_data = { - .gpio_base = PCA9539_77_GPIO_BASE, - .irq_base = -1, -}; - -/************************************************************************* - * I2C Bus - *************************************************************************/ - -static struct i2c_board_info vision_i2c_info[] __initdata = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - .irq = IRQ_EP93XX_EXT1, - }, { - I2C_BOARD_INFO("pca9539", 0x74), - .platform_data = &pca953x_74_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x75), - .platform_data = &pca953x_75_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x76), - .platform_data = &pca953x_76_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x77), - .platform_data = &pca953x_77_gpio_data, - }, -}; - -/************************************************************************* - * SPI CS4271 Audio Codec - *************************************************************************/ -static struct cs4271_platform_data vision_cs4271_data = { - /* Intentionally left blank */ -}; - -/************************************************************************* - * SPI Flash - *************************************************************************/ -static struct mtd_partition vision_spi_flash_partitions[] = { - { - .name = "SPI bootstrap", - .offset = 0, - .size = SZ_4K, - }, { - .name = "Bootstrap config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4K, - }, { - .name = "System config", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data vision_spi_flash_data = { - .name = "SPI Flash", - .parts = vision_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -static struct mmc_spi_platform_data vision_spi_mmc_data = { - .detect_delay = 100, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, -}; - -static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { - .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ - .table = { - /* Card detect */ - GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW), - /* Write protect */ - GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info vision_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &vision_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, { - .modalias = "sst25l", - .platform_data = &vision_spi_flash_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, { - .modalias = "mmc_spi", - .platform_data = &vision_spi_mmc_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 2, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { - .dev_id = "spi0.0", /* cs4271 @ CS0 */ - .table = { - /* RESET */ - GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info vision_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * I2S Audio - *************************************************************************/ -static struct platform_device vision_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static void __init vision_register_i2s(void) -{ - ep93xx_register_i2s(); - platform_device_register(&vision_audio_device); -} - -/************************************************************************* - * Machine Initialization - *************************************************************************/ -static void __init vision_init_machine(void) -{ - ep93xx_init_devices(); - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); - ep93xx_register_eth(&vision_eth_data, 1); - ep93xx_register_fb(&ep93xxfb_info); - ep93xx_register_pwm(1, 0); - - /* - * Request the gpio expander's interrupt gpio line now to prevent - * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). - */ - if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, - "pca9539:74")) - pr_warn("cannot request interrupt gpio for pca9539:74\n"); - - vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - - ep93xx_register_i2c(vision_i2c_info, - ARRAY_SIZE(vision_i2c_info)); - gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table); - gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); - gpiod_add_lookup_table(&vision_spi_cs_gpio_table); - ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, - ARRAY_SIZE(vision_spi_board_info)); - vision_register_i2s(); -} - -MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS, - .map_io = vision_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = vision_init_machine, - .restart = ep93xx_restart, -MACHINE_END |