summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/corsair-cpro.rst7
-rw-r--r--MAINTAINERS2
-rw-r--r--drivers/hwmon/corsair-cpro.c64
3 files changed, 48 insertions, 25 deletions
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
index 78820156f07d..751f95476b57 100644
--- a/Documentation/hwmon/corsair-cpro.rst
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -35,8 +35,7 @@ fan[1-6]_input Connected fan rpm.
fan[1-6]_label Shows fan type as detected by the device.
fan[1-6]_target Sets fan speed target rpm.
When reading, it reports the last value if it was set by the driver.
- Otherwise returns 0.
-pwm[1-6] Sets the fan speed. Values from 0-255.
- When reading, it reports the last value if it was set by the driver.
- Otherwise returns 0.
+ Otherwise returns an error.
+pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm
+ was set directly.
======================= =====================================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 06607125b793..a93aefab91f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4402,7 +4402,7 @@ F: Documentation/hwmon/coretemp.rst
F: drivers/hwmon/coretemp.c
CORSAIR-CPRO HARDWARE MONITOR DRIVER
-M: Marius <mail@mariuszachmann.de>
+M: Marius Zachmann <mail@mariuszachmann.de>
L: linux-hwmon@vger.kernel.org
S: Maintained
F: drivers/hwmon/corsair-cpro.c
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index e8504267d0e8..591929ec217a 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -36,11 +36,12 @@
* send: byte 1 is channel, rest zero
* rcv: returns temp for channel in centi-degree celsius
* in bytes 1 and 2
- * returns 17 in byte 0 if no sensor is connected
+ * returns 0x11 in byte 0 if no sensor is connected
*/
#define CTL_GET_VOLT 0x12 /*
* send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v
* rcv: returns millivolt in bytes 1,2
+ * returns error 0x10 if request is invalid
*/
#define CTL_GET_FAN_CNCT 0x20 /*
* returns in bytes 1-6 for each fan:
@@ -52,6 +53,12 @@
* send: byte 1 is channel, rest zero
* rcv: returns rpm in bytes 1,2
*/
+#define CTL_GET_FAN_PWM 0x22 /*
+ * send: byte 1 is channel, rest zero
+ * rcv: returns pwm in byte 1 if it was set
+ * returns error 0x12 if fan is controlled via
+ * fan_target or fan curve
+ */
#define CTL_SET_FAN_FPWM 0x23 /*
* set fixed pwm
* send: byte 1 is fan number
@@ -73,13 +80,31 @@ struct ccp_device {
struct completion wait_input_report;
struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
u8 *buffer;
- int pwm[6];
int target[6];
DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
DECLARE_BITMAP(fan_cnct, NUM_FANS);
char fan_label[6][LABEL_LENGTH];
};
+/* converts response error in buffer to errno */
+static int ccp_get_errno(struct ccp_device *ccp)
+{
+ switch (ccp->buffer[0]) {
+ case 0x00: /* success */
+ return 0;
+ case 0x01: /* called invalid command */
+ return -EOPNOTSUPP;
+ case 0x10: /* called GET_VOLT / GET_TMP with invalid arguments */
+ return -EINVAL;
+ case 0x11: /* requested temps of disconnected sensors */
+ case 0x12: /* requested pwm of not pwm controlled channels */
+ return -ENODATA;
+ default:
+ hid_dbg(ccp->hdev, "unknown device response error: %d", ccp->buffer[0]);
+ return -EIO;
+ }
+}
+
/* send command, check for error in response, response in ccp->buffer */
static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3)
{
@@ -102,13 +127,7 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2,
if (!t)
return -ETIMEDOUT;
- /* first byte of response is error code */
- if (ccp->buffer[0] != 0x00) {
- hid_dbg(ccp->hdev, "device response error: %d", ccp->buffer[0]);
- return -EIO;
- }
-
- return 0;
+ return ccp_get_errno(ccp);
}
static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
@@ -126,7 +145,7 @@ static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8
}
/* requests and returns single data values depending on channel */
-static int get_data(struct ccp_device *ccp, int command, int channel)
+static int get_data(struct ccp_device *ccp, int command, int channel, bool two_byte_data)
{
int ret;
@@ -136,7 +155,9 @@ static int get_data(struct ccp_device *ccp, int command, int channel)
if (ret)
goto out_unlock;
- ret = (ccp->buffer[1] << 8) + ccp->buffer[2];
+ ret = ccp->buffer[1];
+ if (two_byte_data)
+ ret = (ret << 8) + ccp->buffer[2];
out_unlock:
mutex_unlock(&ccp->mutex);
@@ -150,14 +171,14 @@ static int set_pwm(struct ccp_device *ccp, int channel, long val)
if (val < 0 || val > 255)
return -EINVAL;
- ccp->pwm[channel] = val;
-
/* The Corsair Commander Pro uses values from 0-100 */
val = DIV_ROUND_CLOSEST(val * 100, 255);
mutex_lock(&ccp->mutex);
ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val, 0);
+ if (!ret)
+ ccp->target[channel] = -ENODATA;
mutex_unlock(&ccp->mutex);
return ret;
@@ -171,7 +192,6 @@ static int set_target(struct ccp_device *ccp, int channel, long val)
ccp->target[channel] = val;
mutex_lock(&ccp->mutex);
-
ret = send_usb_cmd(ccp, CTL_SET_FAN_TARGET, channel, val >> 8, val);
mutex_unlock(&ccp->mutex);
@@ -210,7 +230,7 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
- ret = get_data(ccp, CTL_GET_TMP, channel);
+ ret = get_data(ccp, CTL_GET_TMP, channel, true);
if (ret < 0)
return ret;
*val = ret * 10;
@@ -222,7 +242,7 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_fan:
switch (attr) {
case hwmon_fan_input:
- ret = get_data(ccp, CTL_GET_FAN_RPM, channel);
+ ret = get_data(ccp, CTL_GET_FAN_RPM, channel, true);
if (ret < 0)
return ret;
*val = ret;
@@ -230,6 +250,8 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_fan_target:
/* how to read target values from the device is unknown */
/* driver returns last set value or 0 */
+ if (ccp->target[channel] < 0)
+ return -ENODATA;
*val = ccp->target[channel];
return 0;
default:
@@ -239,9 +261,10 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
- /* how to read pwm values from the device is currently unknown */
- /* driver returns last set value or 0 */
- *val = ccp->pwm[channel];
+ ret = get_data(ccp, CTL_GET_FAN_PWM, channel, false);
+ if (ret < 0)
+ return ret;
+ *val = DIV_ROUND_CLOSEST(ret * 255, 100);
return 0;
default:
break;
@@ -250,7 +273,7 @@ static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_in:
switch (attr) {
case hwmon_in_input:
- ret = get_data(ccp, CTL_GET_VOLT, channel);
+ ret = get_data(ccp, CTL_GET_VOLT, channel, true);
if (ret < 0)
return ret;
*val = ret;
@@ -416,6 +439,7 @@ static int get_fan_cnct(struct ccp_device *ccp)
continue;
set_bit(channel, ccp->fan_cnct);
+ ccp->target[channel] = -ENODATA;
switch (mode) {
case 1:
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-04 22:02:30 +0000