diff options
| -rw-r--r-- | drivers/video/omap2/displays-new/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c | 358 | ||||
| -rw-r--r-- | include/video/omap-panel-data.h | 18 |
4 files changed, 382 insertions, 0 deletions
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig index 25696583e206..3dd8bf947e16 100644 --- a/drivers/video/omap2/displays-new/Kconfig +++ b/drivers/video/omap2/displays-new/Kconfig @@ -44,4 +44,9 @@ config DISPLAY_PANEL_SONY_ACX565AKM help This is the LCD panel used on Nokia N900 +config DISPLAY_PANEL_LGPHILIPS_LB035Q02 + tristate "LG.Philips LB035Q02 LCD Panel" + depends on SPI + help + LCD Panel used on the Gumstix Overo Palo35 endmenu diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile index c07bd1e17f47..a5ec42f1d87d 100644 --- a/drivers/video/omap2/displays-new/Makefile +++ b/drivers/video/omap2/displays-new/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o +obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c new file mode 100644 index 000000000000..6e8977b18950 --- /dev/null +++ b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c @@ -0,0 +1,358 @@ +/* + * LG.Philips LB035Q02 LCD Panel driver + * + * Copyright (C) 2013 Texas Instruments + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * Based on a driver by: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/mutex.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-data.h> + +static struct omap_video_timings lb035q02_timings = { + .x_res = 320, + .y_res = 240, + + .pixel_clock = 6500, + + .hsw = 2, + .hfp = 20, + .hbp = 68, + + .vsw = 2, + .vfp = 4, + .vbp = 18, + + .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, + .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, + .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, + .de_level = OMAPDSS_SIG_ACTIVE_HIGH, + .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, +}; + +struct panel_drv_data { + struct omap_dss_device dssdev; + struct omap_dss_device *in; + + struct spi_device *spi; + + int data_lines; + + struct omap_video_timings videomode; + + int reset_gpio; + int backlight_gpio; + int enable_gpio; +}; + +#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) + +static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val) +{ + struct spi_message msg; + struct spi_transfer index_xfer = { + .len = 3, + .cs_change = 1, + }; + struct spi_transfer value_xfer = { + .len = 3, + }; + u8 buffer[16]; + + spi_message_init(&msg); + + /* register index */ + buffer[0] = 0x70; + buffer[1] = 0x00; + buffer[2] = reg & 0x7f; + index_xfer.tx_buf = buffer; + spi_message_add_tail(&index_xfer, &msg); + + /* register value */ + buffer[4] = 0x72; + buffer[5] = val >> 8; + buffer[6] = val; + value_xfer.tx_buf = buffer + 4; + spi_message_add_tail(&value_xfer, &msg); + + return spi_sync(spi, &msg); +} + +static void init_lb035q02_panel(struct spi_device *spi) +{ + /* Init sequence from page 28 of the lb035q02 spec */ + lb035q02_write_reg(spi, 0x01, 0x6300); + lb035q02_write_reg(spi, 0x02, 0x0200); + lb035q02_write_reg(spi, 0x03, 0x0177); + lb035q02_write_reg(spi, 0x04, 0x04c7); + lb035q02_write_reg(spi, 0x05, 0xffc0); + lb035q02_write_reg(spi, 0x06, 0xe806); + lb035q02_write_reg(spi, 0x0a, 0x4008); + lb035q02_write_reg(spi, 0x0b, 0x0000); + lb035q02_write_reg(spi, 0x0d, 0x0030); + lb035q02_write_reg(spi, 0x0e, 0x2800); + lb035q02_write_reg(spi, 0x0f, 0x0000); + lb035q02_write_reg(spi, 0x16, 0x9f80); + lb035q02_write_reg(spi, 0x17, 0x0a0f); + lb035q02_write_reg(spi, 0x1e, 0x00c1); + lb035q02_write_reg(spi, 0x30, 0x0300); + lb035q02_write_reg(spi, 0x31, 0x0007); + lb035q02_write_reg(spi, 0x32, 0x0000); + lb035q02_write_reg(spi, 0x33, 0x0000); + lb035q02_write_reg(spi, 0x34, 0x0707); + lb035q02_write_reg(spi, 0x35, 0x0004); + lb035q02_write_reg(spi, 0x36, 0x0302); + lb035q02_write_reg(spi, 0x37, 0x0202); + lb035q02_write_reg(spi, 0x3a, 0x0a0d); + lb035q02_write_reg(spi, 0x3b, 0x0806); +} + +static int lb035q02_connect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + if (omapdss_device_is_connected(dssdev)) + return 0; + + r = in->ops.dpi->connect(in, dssdev); + if (r) + return r; + + init_lb035q02_panel(ddata->spi); + + return 0; +} + +static void lb035q02_disconnect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + if (!omapdss_device_is_connected(dssdev)) + return; + + in->ops.dpi->disconnect(in, dssdev); +} + +static int lb035q02_enable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + if (!omapdss_device_is_connected(dssdev)) + return -ENODEV; + + if (omapdss_device_is_enabled(dssdev)) + return 0; + + in->ops.dpi->set_data_lines(in, ddata->data_lines); + in->ops.dpi->set_timings(in, &ddata->videomode); + + r = in->ops.dpi->enable(in); + if (r) + return r; + + if (gpio_is_valid(ddata->enable_gpio)) + gpio_set_value_cansleep(ddata->enable_gpio, 1); + + if (gpio_is_valid(ddata->backlight_gpio)) + gpio_set_value_cansleep(ddata->backlight_gpio, 1); + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void lb035q02_disable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + if (!omapdss_device_is_enabled(dssdev)) + return; + + if (gpio_is_valid(ddata->enable_gpio)) + gpio_set_value_cansleep(ddata->enable_gpio, 0); + + if (gpio_is_valid(ddata->backlight_gpio)) + gpio_set_value_cansleep(ddata->backlight_gpio, 0); + + in->ops.dpi->disable(in); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +} + +static void lb035q02_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + ddata->videomode = *timings; + dssdev->panel.timings = *timings; + + in->ops.dpi->set_timings(in, timings); +} + +static void lb035q02_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + + *timings = ddata->videomode; +} + +static int lb035q02_check_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + return in->ops.dpi->check_timings(in, timings); +} + +static struct omap_dss_driver lb035q02_ops = { + .connect = lb035q02_connect, + .disconnect = lb035q02_disconnect, + + .enable = lb035q02_enable, + .disable = lb035q02_disable, + + .set_timings = lb035q02_set_timings, + .get_timings = lb035q02_get_timings, + .check_timings = lb035q02_check_timings, + + .get_resolution = omapdss_default_get_resolution, +}; + +static int lb035q02_probe_pdata(struct spi_device *spi) +{ + const struct panel_lb035q02_platform_data *pdata; + struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); + struct omap_dss_device *dssdev, *in; + + pdata = dev_get_platdata(&spi->dev); + + in = omap_dss_find_output(pdata->source); + if (in == NULL) { + dev_err(&spi->dev, "failed to find video source '%s'\n", + pdata->source); + return -EPROBE_DEFER; + } + + ddata->in = in; + + ddata->data_lines = pdata->data_lines; + + dssdev = &ddata->dssdev; + dssdev->name = pdata->name; + + ddata->enable_gpio = pdata->enable_gpio; + ddata->backlight_gpio = pdata->backlight_gpio; + + return 0; +} + +static int lb035q02_panel_spi_probe(struct spi_device *spi) +{ + struct panel_drv_data *ddata; + struct omap_dss_device *dssdev; + int r; + + ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); + if (ddata == NULL) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ddata); + + ddata->spi = spi; + + if (dev_get_platdata(&spi->dev)) { + r = lb035q02_probe_pdata(spi); + if (r) + return r; + } else { + return -ENODEV; + } + + if (gpio_is_valid(ddata->enable_gpio)) { + r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio, + GPIOF_OUT_INIT_LOW, "panel enable"); + if (r) + goto err_gpio; + } + + if (gpio_is_valid(ddata->backlight_gpio)) { + r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio, + GPIOF_OUT_INIT_LOW, "panel backlight"); + if (r) + goto err_gpio; + } + + ddata->videomode = lb035q02_timings; + + dssdev = &ddata->dssdev; + dssdev->dev = &spi->dev; + dssdev->driver = &lb035q02_ops; + dssdev->type = OMAP_DISPLAY_TYPE_DPI; + dssdev->owner = THIS_MODULE; + dssdev->panel.timings = ddata->videomode; + dssdev->phy.dpi.data_lines = ddata->data_lines; + + r = omapdss_register_display(dssdev); + if (r) { + dev_err(&spi->dev, "Failed to register panel\n"); + goto err_reg; + } + + return 0; + +err_reg: +err_gpio: + omap_dss_put_device(ddata->in); + return r; +} + +static int lb035q02_panel_spi_remove(struct spi_device *spi) +{ + struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); + struct omap_dss_device *dssdev = &ddata->dssdev; + struct omap_dss_device *in = ddata->in; + + omapdss_unregister_display(dssdev); + + lb035q02_disable(dssdev); + lb035q02_disconnect(dssdev); + + omap_dss_put_device(in); + + return 0; +} + +static struct spi_driver lb035q02_spi_driver = { + .probe = lb035q02_panel_spi_probe, + .remove = lb035q02_panel_spi_remove, + .driver = { + .name = "panel_lgphilips_lb035q02", + .owner = THIS_MODULE, + }, +}; + +module_spi_driver(lb035q02_spi_driver); + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); +MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver"); +MODULE_LICENSE("GPL"); diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h index 678f5f70da1a..baf40450aae4 100644 --- a/include/video/omap-panel-data.h +++ b/include/video/omap-panel-data.h @@ -280,4 +280,22 @@ struct panel_acx565akm_platform_data { int datapairs; }; +/** + * panel_lb035q02 platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @data_lines: number of DPI datalines + * @backlight_gpio: gpio to enable/disable the backlight (or -1) + * @enable_gpio: gpio to enable/disable the panel (or -1) + */ +struct panel_lb035q02_platform_data { + const char *name; + const char *source; + + int data_lines; + + int backlight_gpio; + int enable_gpio; +}; + #endif /* __OMAP_PANEL_DATA_H */ |