diff options
60 files changed, 1522 insertions, 892 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt deleted file mode 100644 index d54f33c4e0da..000000000000 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ /dev/null @@ -1,56 +0,0 @@ -Actions Semi platforms device tree bindings -------------------------------------------- - - -S500 SoC -======== - -Required root node properties: - - - compatible : must contain "actions,s500" - - -Modules: - -Root node property compatible must contain, depending on module: - - - LeMaker Guitar: "lemaker,guitar" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Allo.com Sparky: "allo,sparky" - - Cubietech CubieBoard6: "cubietech,cubieboard6" - - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" - - -S700 SoC -======== - -Required root node properties: - -- compatible : must contain "actions,s700" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Cubietech CubieBoard7: "cubietech,cubieboard7" - - -S900 SoC -======== - -Required root node properties: - -- compatible : must contain "actions,s900" - - -Boards: - -Root node property compatible must contain, depending on board: - - - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96" diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml new file mode 100644 index 000000000000..ace3fdaa8396 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/actions.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/actions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi platforms device tree bindings + +maintainers: + - Andreas Färber <afaerber@suse.de> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + oneOf: + # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC. + - items: + - enum: + - allo,sparky # Allo.com Sparky + - cubietech,cubieboard6 # Cubietech CubieBoard6 + - const: actions,s500 + - items: + - enum: + - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B + - const: lemaker,guitar + - const: actions,s500 + + # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC. + - items: + - enum: + - cubietech,cubieboard7 # Cubietech CubieBoard7 + - const: actions,s700 + + # The Actions Semi S900 is a quad-core ARM Cortex-A53 SoC. + - items: + - enum: + - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96 + - const: actions,s900 diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt deleted file mode 100644 index c67d9f48fb91..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt +++ /dev/null @@ -1,28 +0,0 @@ -Amlogic Meson Firmware registers Interface ------------------------------------------- - -The Meson SoCs have a register bank with status and data shared with the -secure firmware. - -Required properties: - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" - -Properties should indentify components of this register interface : - -Meson GX SoC Information ------------------------- -A firmware register encodes the SoC type, package and revision information on -the Meson GX SoCs. -If present, the following property should be added : - -Optional properties: - - amlogic,has-chip-id: If present, the interface gives the current SoC version. - -Example -------- - -ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; -}; diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml new file mode 100644 index 000000000000..853d7d2b56f5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Firmware registers Interface + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Meson SoCs have a register bank with status and data shared with the + secure firmware. + +# We need a select here so we don't match all nodes with 'syscon' +select: + properties: + compatible: + contains: + const: amlogic,meson-gx-ao-secure + required: + - compatible + +properties: + compatible: + items: + - const: amlogic,meson-gx-ao-secure + - const: syscon + + reg: + maxItems: 1 + + amlogic,has-chip-id: + description: | + A firmware register encodes the SoC type, package and revision + information on the Meson GX SoCs. If present, the interface gives + the current SoC version. + type: boolean + +required: + - compatible + - reg + +examples: + - | + ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x140 0x140>; + amlogic,has-chip-id; + }; diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 6758ece324b1..b2a9f9f8430b 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -199,7 +199,7 @@ The description for the board must include: A detailed description of the bindings used for "psci" nodes is present in the psci.yaml file. - a "cpus" node describing the available cores and their associated - "enable-method"s. For more details see cpus.txt file. + "enable-method"s. For more details see cpus.yaml file. Example: diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 727e0ffc702b..cb30895e3b67 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -124,6 +124,7 @@ properties: - arm,cortex-a15 - arm,cortex-a17 - arm,cortex-a53 + - arm,cortex-a55 - arm,cortex-a57 - arm,cortex-a72 - arm,cortex-a73 @@ -155,6 +156,7 @@ properties: - qcom,krait - qcom,kryo - qcom,kryo385 + - qcom,kryo485 - qcom,scorpion enable-method: diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 2d325bed37e5..771f5d20ae18 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -28,7 +28,7 @@ PM implementation to put the processor in different idle states (which include states listed above; "off" state is not an idle state since it does not have wake-up capabilities, hence it is not considered in this document). -Idle state parameters (eg entry latency) are platform specific and need to be +Idle state parameters (e.g. entry latency) are platform specific and need to be characterized with bindings that provide the required information to OS PM code so that it can build the required tables and use them at runtime. @@ -90,24 +90,24 @@ These timing parameters can be used by an OS in different circumstances. An idle CPU requires the expected min-residency time to select the most appropriate idle state based on the expected expiry time of the next IRQ -(ie wake-up) that causes the CPU to return to the EXEC phase. +(i.e. wake-up) that causes the CPU to return to the EXEC phase. An operating system scheduler may need to compute the shortest wake-up delay for CPUs in the system by detecting how long will it take to get a CPU out -of an idle state, eg: +of an idle state, e.g.: wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) In other words, the scheduler can make its scheduling decision by selecting -(eg waking-up) the CPU with the shortest wake-up latency. -The wake-up latency must take into account the entry latency if that period +(e.g. waking-up) the CPU with the shortest wake-up delay. +The wake-up delay must take into account the entry latency if that period has not expired. The abortable nature of the PREP period can be ignored if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than -the worst case since it depends on the CPU operating conditions, ie caches +the worst case since it depends on the CPU operating conditions, i.e. caches state). An OS has to reliably probe the wakeup-latency since some devices can enforce -latency constraints guarantees to work properly, so the OS has to detect the +latency constraint guarantees to work properly, so the OS has to detect the worst case wake-up latency it can incur if a CPU is allowed to enter an idle state, and possibly to prevent that to guarantee reliable device functioning. @@ -183,15 +183,15 @@ and IDLE2: Graph 2: idle states min-residency example In graph 2 above, that takes into account idle states entry/exit energy -costs, it is clear that if the idle state residency time (ie time till next +costs, it is clear that if the idle state residency time (i.e. time till next wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state choice energywise. This is mainly down to the fact that IDLE1 entry/exit energy costs are lower than IDLE2. -However, the lower power consumption (ie shallower energy curve slope) of idle -state IDLE2 implies that after a suitable time, IDLE2 becomes more energy +However, the lower power consumption (i.e. shallower energy curve slope) of +idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy efficient. The time at which IDLE2 becomes more energy efficient than IDLE1 (and other @@ -214,8 +214,8 @@ processor idle states, defined as device tree nodes, are listed. Usage: Optional - On ARM systems, it is a container of processor idle states nodes. If the system does not provide CPU - power management capabilities or the processor just - supports idle_standby an idle-states node is not + power management capabilities, or the processor just + supports idle_standby, an idle-states node is not required. Description: idle-states node is a container node, where its @@ -287,14 +287,14 @@ follows: Value type: <prop-encoded-array> Definition: u32 value representing worst case latency in microseconds required to enter the idle state. - The exit-latency-us duration may be guaranteed - only after entry-latency-us has passed. - exit-latency-us Usage: Required Value type: <prop-encoded-array> Definition: u32 value representing worst case latency in microseconds required to exit the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. - min-residency-us Usage: Required @@ -342,8 +342,8 @@ follows: state. In addition to the properties listed above, a state node may require - additional properties specifics to the entry-method defined in the - idle-states node, please refer to the entry-method bindings + additional properties specific to the entry-method defined in the + idle-states node. Please refer to the entry-method bindings documentation for properties definitions. =========================================== diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt deleted file mode 100644 index 95839e19ae92..000000000000 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ /dev/null @@ -1,22 +0,0 @@ -Realtek platforms device tree bindings --------------------------------------- - - -RTD1295 SoC -=========== - -Required root node properties: - - - compatible : must contain "realtek,rtd1295" - - -Root node property compatible must contain, depending on board: - - - MeLE V9: "mele,v9" - - ProBox2 AVA: "probox2,ava" - - Zidoo X9S: "zidoo,x9s" - - -Example: - - compatible = "zidoo,x9s", "realtek,rtd1295"; diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml new file mode 100644 index 000000000000..3528b61963b4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/realtek.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/realtek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek platforms device tree bindings + +maintainers: + - Andreas Färber <afaerber@suse.de> + +properties: + $nodename: + const: '/' + compatible: + # RTD1295 SoC based boards + items: + - enum: + - mele,v9 + - probox2,ava + - zidoo,x9s + - const: realtek,rtd1295 +... diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index e30fd106df4f..55c6fab1b373 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -45,7 +45,7 @@ Required properties when using sub-nodes: - #address-cells : number of cells to encode an address - #size-cells : number of cells representing the size of an address -For allwinner,sun8i-r40-ahci, the reset propertie must be present. +For allwinner,sun8i-r40-ahci, the reset property must be present. Sub-nodes required properties: - reg : the port number diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml new file mode 100644 index 000000000000..d2a872286437 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A64 Display Engine Bus Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + $nodename: + pattern: "^bus(@[0-9a-f]+)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun50i-a64-de2 + - items: + - const: allwinner,sun50i-h6-de3 + - const: allwinner,sun50i-a64-de2 + + reg: + maxItems: 1 + + allwinner,sram: + allOf: + - $ref: /schemas/types.yaml#definitions/phandle-array + - maxItems: 1 + description: + The SRAM that needs to be claimed to access the display engine + bus. + + ranges: true + +patternProperties: + # All other properties should be child nodes with unit-address and 'reg' + "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$": + type: object + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - allwinner,sram + +additionalProperties: false + +examples: + - | + bus@1000000 { + compatible = "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x0 0x100000>; + clocks = <&ccu 52>, <&ccu 99>; + clock-names = "bus", "mod"; + resets = <&ccu 30>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt index 5a7d567f6833..5058aa2c63b2 100644 --- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt +++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt @@ -71,7 +71,7 @@ Optional subnodes: The following optional properties are properties that can be tagged onto any device subnode. We are assuming that there can be only ONE device per -chipselect subnode, else the properties will become ambigous. +chipselect subnode, else the properties will become ambiguous. Optional properties arrays for SLOW chip selects: - qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt deleted file mode 100644 index b9d533717dff..000000000000 --- a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt +++ /dev/null @@ -1,40 +0,0 @@ -Device tree bindings for Allwinner DE2/3 bus - -The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C) -to be claimed for enabling the access. The DE3 on Allwinner H6 is at the same -situation, and the binding also applies. - -Required properties: - - - compatible: Should be one of: - - "allwinner,sun50i-a64-de2" - - "allwinner,sun50i-h6-de3", "allwinner,sun50i-a64-de2" - - reg: A resource specifier for the register space - - #address-cells: Must be set to 1 - - #size-cells: Must be set to 1 - - ranges: Must be set up to map the address space inside the - DE2, for the sub-blocks of DE2. - - allwinner,sram: the SRAM that needs to be claimed - -Example: - - de2@1000000 { - compatible = "allwinner,sun50i-a64-de2"; - reg = <0x1000000 0x400000>; - allwinner,sram = <&de2_sram 1>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1000000 0x400000>; - - display_clocks: clock@0 { - compatible = "allwinner,sun50i-a64-de2-clk"; - reg = <0x0 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; - resets = <&ccu RST_BUS_DE>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml new file mode 100644 index 000000000000..80b3e7350a73 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Security System Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + resets: + maxItems: 1 + + reset-names: + const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-crypto + +then: + required: + - resets + - reset-names + +additionalProperties: false + +examples: + - | + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <86>; + clocks = <&ahb_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt deleted file mode 100644 index f2dc3d9bca92..000000000000 --- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Allwinner Security System found on A20 SoC - -Required properties: -- compatible : Should be "allwinner,sun4i-a10-crypto". -- reg: Should contain the Security System register location and length. -- interrupts: Should contain the IRQ line for the Security System. -- clocks : List of clock specifiers, corresponding to ahb and ss. -- clock-names : Name of the functional clock, should be - * "ahb" : AHB gating clock - * "mod" : SS controller clock - -Optional properties: - - resets : phandle + reset specifier pair - - reset-names : must contain "ahb" - -Example: - crypto: crypto-engine@1c15000 { - compatible = "allwinner,sun4i-a10-crypto"; - reg = <0x01c15000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb_gates 5>, <&ss_clk>; - clock-names = "ahb", "mod"; - }; diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 9175d67f355d..c43819c2783a 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -5,7 +5,7 @@ # All the top-level keys are standard json-schema keywords except for # 'maintainers' and 'select' -# $id is a unique idenifier based on the filename. There may or may not be a +# $id is a unique identifier based on the filename. There may or may not be a # file present at the URL. $id: "http://devicetree.org/schemas/example-schema.yaml#" # $schema is the meta-schema this schema should be validated with. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt deleted file mode 100644 index b8be9dbc68b4..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt +++ /dev/null @@ -1,92 +0,0 @@ -ARM Mali Bifrost GPU -==================== - -Required properties: - -- compatible : - * Since Mali Bifrost GPU model/revision is fully discoverable by reading - some determined registers, must contain the following: - + "arm,mali-bifrost" - * which must be preceded by one of the following vendor specifics: - + "amlogic,meson-g12a-mali" - -- reg : Physical base address of the device and length of the register area. - -- interrupts : Contains the three IRQ lines required by Mali Bifrost devices, - in the following defined order. - -- interrupt-names : Contains the names of IRQ resources in this exact defined - order: "job", "mmu", "gpu". - -Optional properties: - -- clocks : Phandle to clock for the Mali Bifrost device. - -- mali-supply : Phandle to regulator for the Mali device. Refer to - Documentation/devicetree/bindings/regulator/regulator.txt for details. - -- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt - for details. - -- resets : Phandle of the GPU reset line. - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accommodate those differences, you have the option -to specify one more vendor-specific compatible, among: - -- "amlogic,meson-g12a-mali" - Required properties: - - resets : Should contain phandles of : - + GPU reset line - + GPU APB glue reset line - -Example for a Mali-G31: - -gpu@ffa30000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0xffe40000 0x10000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clk CLKID_MALI>; - mali-supply = <&vdd_gpu>; - operating-points-v2 = <&gpu_opp_table>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; -}; - -gpu_opp_table: opp_table0 { - compatible = "operating-points-v2"; - - opp@533000000 { - opp-hz = /bits/ 64 <533000000>; - opp-microvolt = <1250000>; - }; - opp@450000000 { - opp-hz = /bits/ 64 <450000000>; - opp-microvolt = <1150000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1125000>; - }; - opp@350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1075000>; - }; - opp@266000000 { - opp-hz = /bits/ 64 <266000000>; - opp-microvolt = <1025000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <925000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <912500>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml new file mode 100644 index 000000000000..5f1fd6d7ee0f --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Bifrost GPU + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + items: + - enum: + - amlogic,meson-g12a-mali + - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + maxItems: 1 + + mali-supply: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: amlogic,meson-g12a-mali + then: + properties: + resets: + minItems: 2 + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0xffe40000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clk 1>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + resets = <&reset 0>, <&reset 1>; + }; + + gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt deleted file mode 100644 index 9b298edec5b2..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ /dev/null @@ -1,119 +0,0 @@ -ARM Mali Midgard GPU -==================== - -Required properties: - -- compatible : - * Must contain one of the following: - + "arm,mali-t604" - + "arm,mali-t624" - + "arm,mali-t628" - + "arm,mali-t720" - + "arm,mali-t760" - + "arm,mali-t820" - + "arm,mali-t830" - + "arm,mali-t860" - + "arm,mali-t880" - * which must be preceded by one of the following vendor specifics: - + "allwinner,sun50i-h6-mali" - + "amlogic,meson-gxm-mali" - + "samsung,exynos5433-mali" - + "rockchip,rk3288-mali" - + "rockchip,rk3399-mali" - -- reg : Physical base address of the device and length of the register area. - -- interrupts : Contains the three IRQ lines required by Mali Midgard devices. - -- interrupt-names : Contains the names of IRQ resources in the order they were - provided in the interrupts property. Must contain: "job", "mmu", "gpu". - - -Optional properties: - -- clocks : Phandle to clock for the Mali Midgard device. - -- clock-names : Specify the names of the clocks specified in clocks - when multiple clocks are present. - * core: clock driving the GPU itself (When only one clock is present, - assume it's this clock.) - * bus: bus clock for the GPU - -- mali-supply : Phandle to regulator for the Mali device. Refer to - Documentation/devicetree/bindings/regulator/regulator.txt for details. - -- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt - for details. - -- #cooling-cells: Refer to Documentation/devicetree/bindings/thermal/thermal.txt - for details. - -- resets : Phandle of the GPU reset line. - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accommodate those differences, you have the option -to specify one more vendor-specific compatible, among: - -- "allwinner,sun50i-h6-mali" - Required properties: - - clocks : phandles to core and bus clocks - - clock-names : must contain "core" and "bus" - - resets: phandle to GPU reset line - -- "amlogic,meson-gxm-mali" - Required properties: - - resets : Should contain phandles of : - + GPU reset line - + GPU APB glue reset line - -Example for a Mali-T760: - -gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760"; - reg = <0xffa30000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cru ACLK_GPU>; - mali-supply = <&vdd_gpu>; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3288_PD_GPU>; - #cooling-cells = <2>; -}; - -gpu_opp_table: opp_table0 { - compatible = "operating-points-v2"; - - opp@533000000 { - opp-hz = /bits/ 64 <533000000>; - opp-microvolt = <1250000>; - }; - opp@450000000 { - opp-hz = /bits/ 64 <450000000>; - opp-microvolt = <1150000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1125000>; - }; - opp@350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1075000>; - }; - opp@266000000 { - opp-hz = /bits/ 64 <266000000>; - opp-microvolt = <1025000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <925000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <912500>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml new file mode 100644 index 000000000000..47bc1ac36426 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-midgard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Midgard GPU + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + compatible: + oneOf: + - items: + - enum: + - allwinner,sun50i-h6-mali + - const: arm,mali-t720 + - items: + - enum: + - amlogic,meson-gxm-mali + - const: arm,mali-t820 + - items: + - enum: + - rockchip,rk3288-mali + - const: arm,mali-t760 + - items: + - enum: + - rockchip,rk3399-mali + - const: arm,mali-t860 + - items: + - enum: + - samsung,exynos5250-mali + - const: arm,mali-t604 + - items: + - enum: + - samsung,exynos5433-mali + - const: arm,mali-t760 + + # "arm,mali-t624" + # "arm,mali-t628" + # "arm,mali-t830" + # "arm,mali-t880" + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: bus + + mali-supply: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + + operating-points-v2: true + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-mali + then: + properties: + clocks: + minItems: 2 + required: + - clock-names + - resets + - if: + properties: + compatible: + contains: + const: amlogic,meson-gxm-mali + then: + properties: + resets: + minItems: 2 + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; + reg = <0xffa30000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru 0>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power 0>; + #cooling-cells = <2>; + }; + + gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt deleted file mode 100644 index b352a6851a06..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ /dev/null @@ -1,124 +0,0 @@ -ARM Mali Utgard GPU -=================== - -Required properties: - - compatible - * Must be one of the following: - + "arm,mali-300" - + "arm,mali-400" - + "arm,mali-450" - * And, optionally, one of the vendor specific compatible: - + allwinner,sun4i-a10-mali - + allwinner,sun7i-a20-mali - + allwinner,sun8i-h3-mali - + allwinner,sun50i-a64-mali - + allwinner,sun50i-h5-mali - + amlogic,meson8-mali - + amlogic,meson8b-mali - + amlogic,meson-gxbb-mali - + amlogic,meson-gxl-mali - + samsung,exynos4210-mali - + rockchip,rk3036-mali - + rockchip,rk3066-mali - + rockchip,rk3188-mali - + rockchip,rk3228-mali - + rockchip,rk3328-mali - + stericsson,db8500-mali - - - reg: Physical base address and length of the GPU registers - - - interrupts: an entry for each entry in interrupt-names. - See ../interrupt-controller/interrupts.txt for details. - - - interrupt-names: - * ppX: Pixel Processor X interrupt (X from 0 to 7) - * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7) - * pp: Pixel Processor broadcast interrupt (mali-450 only) - * gp: Geometry Processor interrupt - * gpmmu: Geometry Processor MMU interrupt - - - clocks: an entry for each entry in clock-names - - clock-names: - * bus: bus clock for the GPU - * core: clock driving the GPU itself - -Optional properties: - - interrupt-names and interrupts: - * pmu: Power Management Unit interrupt, if implemented in hardware - - - memory-region: - Memory region to allocate from, as defined in - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - - - mali-supply: - Phandle to regulator for the Mali device, as defined in - Documentation/devicetree/bindings/regulator/regulator.txt for details. - - - operating-points-v2: - Operating Points for the GPU, as defined in - Documentation/devicetree/bindings/opp/opp.txt - - - power-domains: - A power domain consumer specifier as defined in - Documentation/devicetree/bindings/power/power_domain.txt - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accomodate those differences, you have the option -to specify one more vendor-specific compatible, among: - - - allwinner,sun4i-a10-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun7i-a20-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-a64-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-h5-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - amlogic,meson8-mali and amlogic,meson8b-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - Rockchip variants: - Required properties: - * resets: phandle to the reset line for the GPU - - - stericsson,db8500-mali - Required properties: - * interrupt-names and interrupts: - + combined: combined interrupt of all of the above lines - -Example: - -mali: gpu@1c40000 { - compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; - reg = <0x01c40000 0x10000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", - "gpmmu", - "pp0", - "ppmmu0", - "pp1", - "ppmmu1", - "pmu"; - clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; - clock-names = "bus", "core"; - resets = <&ccu RST_BUS_GPU>; -}; - diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml new file mode 100644 index 000000000000..c5d93c5839d3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-utgard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Utgard GPU + +maintainers: + - Rob Herring <robh@kernel.org> + - Maxime Ripard <maxime.ripard@free-electrons.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + compatible: + oneOf: + - items: + - const: allwinner,sun8i-a23-mali + - const: allwinner,sun7i-a20-mali + - const: arm,mali-400 + - items: + - enum: + - allwinner,sun4i-a10-mali + - allwinner,sun7i-a20-mali + - allwinner,sun8i-h3-mali + - allwinner,sun50i-a64-mali + - rockchip,rk3036-mali + - rockchip,rk3066-mali + - rockchip,rk3188-mali + - rockchip,rk3228-mali + - samsung,exynos4210-mali + - stericsson,db8500-mali + - const: arm,mali-400 + - items: + - enum: + - allwinner,sun50i-h5-mali + - amlogic,meson8-mali + - amlogic,meson8b-mali + - amlogic,meson-gxbb-mali + - amlogic,meson-gxl-mali + - hisilicon,hi6220-mali + - rockchip,rk3328-mali + - const: arm,mali-450 + + # "arm,mali-300" + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 20 + + interrupt-names: + allOf: + - additionalItems: true + minItems: 4 + maxItems: 20 + items: + # At least enforce the first 2 interrupts + - const: gp + - const: gpmmu + - items: + # Not ideal as any order and combination are allowed + enum: + - gp # Geometry Processor interrupt + - gpmmu # Geometry Processor MMU interrupt + - pp # Pixel Processor broadcast interrupt (mali-450 only) + - pp0 # Pixel Processor X interrupt (X from 0 to 7) + - ppmmu0 # Pixel Processor X MMU interrupt (X from 0 to 7) + - pp1 + - ppmmu1 + - pp2 + - ppmmu2 + - pp3 + - ppmmu3 + - pp4 + - ppmmu4 + - pp5 + - ppmmu5 + - pp6 + - ppmmu6 + - pp7 + - ppmmu7 + - pmu # Power Management Unit interrupt (optional) + - combined # stericsson,db8500-mali only + + clocks: + maxItems: 2 + + clock-names: + items: + - const: bus + - const: core + + memory-region: true + + mali-supply: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-mali + - allwinner,sun7i-a20-mali + - allwinner,sun50i-a64-mali + - allwinner,sun50i-h5-mali + - amlogic,meson8-mali + - amlogic,meson8b-mali + - hisilicon,hi6220-mali + - rockchip,rk3036-mali + - rockchip,rk3066-mali + - rockchip,rk3188-mali + - rockchip,rk3228-mali + - rockchip,rk3328-mali + then: + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mali: gpu@1c40000 { + compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu 1>, <&ccu 2>; + clock-names = "bus", "core"; + resets = <&ccu 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml new file mode 100644 index 000000000000..b3bd8ef7fbd6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 LRADC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-lradc-keys + - const: allwinner,sun8i-a83t-r-lradc + - items: + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-supply: + description: + Regulator for the LRADC reference voltage + +patternProperties: + "^button-[0-9]+$": + type: object + properties: + label: + $ref: /schemas/types.yaml#/definitions/string + description: Descriptive name of the key + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Keycode to emit + + channel: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + description: ADC Channel this key is attached to + + voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Voltage in microvolts at LRADC input when this key is + pressed + + required: + - label + - linux,code + - channel + - voltage + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vref-supply + +additionalProperties: false + +examples: + - | + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + vref-supply = <®_vcc3v0>; + + button-191 { + label = "Volume Up"; + linux,code = <115>; + channel = <0>; + voltage = <191274>; + }; + + button-392 { + label = "Volume Down"; + linux,code = <114>; + channel = <0>; + voltage = <392644>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt deleted file mode 100644 index 507b737612ea..000000000000 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ /dev/null @@ -1,65 +0,0 @@ -Allwinner sun4i low res adc attached tablet keys ------------------------------------------------- - -Required properties: - - compatible: should be one of the following string: - "allwinner,sun4i-a10-lradc-keys" - "allwinner,sun8i-a83t-r-lradc" - "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc" - - reg: mmio address range of the chip - - interrupts: interrupt to which the chip is connected - - vref-supply: powersupply for the lradc reference voltage - -Each key is represented as a sub-node of the compatible mentioned above: - -Required subnode-properties: - - label: Descriptive name of the key. - - linux,code: Keycode to emit. - - channel: Channel this key is attached to, must be 0 or 1. - - voltage: Voltage in µV at lradc input when this key is pressed. - -Example: - -#include <dt-bindings/input/input.h> - - lradc: lradc@1c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - vref-supply = <®_vcc3v0>; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml new file mode 100644 index 000000000000..23a202d24e43 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Interrupt Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + "#interrupt-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-ic + - allwinner,suniv-f1c100s-ic + + reg: + maxItems: 1 + + interrupt-controller: true + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupt-controller + +additionalProperties: false + +examples: + - | + intc: interrupt-controller@1c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt deleted file mode 100644 index 404352524c3a..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt +++ /dev/null @@ -1,20 +0,0 @@ -Allwinner Sunxi Interrupt Controller - -Required properties: - -- compatible : should be one of the following: - "allwinner,sun4i-a10-ic" - "allwinner,suniv-f1c100s-ic" -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 1. - -Example: - -intc: interrupt-controller { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml new file mode 100644 index 000000000000..0eccf5551786 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell the trigger + type as defined in interrupt.txt in this directory. + + compatible: + oneOf: + - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun6i-a31-sc-nmi + deprecated: true + - const: allwinner,sun7i-a20-sc-nmi + - items: + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun9i-a80-sc-nmi + - items: + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc + - items: + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupts + - interrupt-controller + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + interrupt-controller@1c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt deleted file mode 100644 index 24beadf7ba83..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ /dev/null @@ -1,29 +0,0 @@ -Allwinner Sunxi NMI Controller -============================== - -Required properties: - -- compatible : should be one of the following: - - "allwinner,sun7i-a20-sc-nmi" - - "allwinner,sun6i-a31-sc-nmi" (deprecated) - - "allwinner,sun6i-a31-r-intc" - - "allwinner,sun9i-a80-nmi" -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 2. The first cell is the IRQ number, the - second cell the trigger type as defined in interrupt.txt in this directory. -- interrupts: Specifies the interrupt line (NMI) which is handled by - the interrupt controller in the parent controller's notation. This value - shall be the NMI. - -Example: - -sc-nmi-intc@1c00030 { - compatible = "allwinner,sun7i-a20-sc-nmi"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x01c00030 0x0c>; - interrupt-parent = <&gic>; - interrupts = <0 0 4>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt index 8a3c40829899..4a3ee253f7f0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -22,10 +22,10 @@ controller node. This property is inherited, so it may be specified in an interrupt client node or in any of its parent nodes. Interrupts listed in the "interrupts" property are always in reference to the node's interrupt parent. -The "interrupts-extended" property is a special form for use when a node needs -to reference multiple interrupt parents. Each entry in this property contains -both the parent phandle and the interrupt specifier. "interrupts-extended" -should only be used when a device has multiple interrupt parents. +The "interrupts-extended" property is a special form; useful when a node needs +to reference multiple interrupt parents or a different interrupt parent than +the inherited one. Each entry in this property contains both the parent phandle +and the interrupt specifier. Example: interrupts-extended = <&intc1 5 1>, <&intc2 1 0>; diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml new file mode 100644 index 000000000000..319280563648 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Message-Handling-Unit Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller + that has 3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any + received data. However, there is no specified way of knowing if the sent + data has been read by the remote. This driver assumes the sender polls + STAT register and the remote clears it after having read the data. + +properties: + compatible: + enum: + - amlogic,meson-gxbb-mhu + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + description: + Contains the interrupt information corresponding to each of the 3 links + of MHU. + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +examples: + - | + mailbox@c883c404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0xc883c404 0x4c>; + interrupts = <208>, <209>, <210>; + #mbox-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/mailbox/meson-mhu.txt b/Documentation/devicetree/bindings/mailbox/meson-mhu.txt deleted file mode 100644 index a530310772b9..000000000000 --- a/Documentation/devicetree/bindings/mailbox/meson-mhu.txt +++ /dev/null @@ -1,34 +0,0 @@ -Amlogic Meson MHU Mailbox Driver -================================ - -The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller -that has 3 independent channels/links to communicate with remote processor(s). -MHU links are hardwired on a platform. A link raises interrupt for any -received data. However, there is no specified way of knowing if the sent -data has been read by the remote. This driver assumes the sender polls -STAT register and the remote clears it after having read the data. - -Mailbox Device Node: -==================== - -Required properties: --------------------- -- compatible: Shall be "amlogic,meson-gxbb-mhu" -- reg: Contains the mailbox register address range (base - address and length) -- #mbox-cells Shall be 1 - the index of the channel needed. -- interrupts: Contains the interrupt information corresponding to - each of the 2 links of MHU. - -Example: --------- - - mailbox: mailbox@c883c404 { - #mbox-cells = <1>; - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0xc883c404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt index 8ee7c7972ac7..c3c3479233c4 100644 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt @@ -7,6 +7,9 @@ of that. These definitions are valid for both types of sensors. More detailed documentation can be found in Documentation/devicetree/bindings/media/video-interfaces.txt . +The device node should contain a "port" node which may contain one or more +endpoint nodes, in accordance with video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt . Mandatory properties -------------------- @@ -37,9 +40,7 @@ Optional properties Endpoint node mandatory properties ---------------------------------- -- clock-lanes: <0> - data-lanes: <1..n> -- remote-endpoint: A phandle to the bus receiver's endpoint node. Example @@ -48,7 +49,7 @@ Example &i2c2 { clock-frequency = <400000>; - smiapp_1: camera@10 { + camera-sensor@10 { compatible = "nokia,smia"; reg = <0x10>; reset-gpios = <&gpio3 20 0>; @@ -58,8 +59,7 @@ Example nokia,nvm-size = <512>; /* 8 * 64 */ link-frequencies = /bits/ 64 <199200000 210000000 499200000>; port { - smiapp_1_1: endpoint { - clock-lanes = <0>; + smiapp_ep: endpoint { data-lanes = <1 2>; remote-endpoint = <&csi2a_ep>; }; diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt index 9b3cc817d181..b73d839657b6 100644 --- a/Documentation/devicetree/bindings/pci/pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/pci-msi.txt @@ -201,7 +201,7 @@ Example (5) #msi-cells = <1>; }; - pci: pci@c { + pci: pci@f { reg = <0xf 0x1>; compatible = "vendor,pcie-root-complex"; device_type = "pci"; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml new file mode 100644 index 000000000000..51254b4e65dd --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB2 PHY + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: + maxItems: 1 + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +examples: + - | + phy@36000 { + compatible = "amlogic,meson-g12a-usb2-phy"; + reg = <0x36000 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml new file mode 100644 index 000000000000..346f9c35427c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB3 + PCIE Combo PHY + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb3-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +examples: + - | + phy@46000 { + compatible = "amlogic,meson-g12a-usb3-pcie-phy"; + reg = <0x46000 0x2000>; + clocks = <&ref_clk>; + clock-names = "ref_clk"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt deleted file mode 100644 index a6ebc3dea159..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic G12A USB2 PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- clocks: a phandle to the clock of this PHY -- clock-names: must be "xtal" -- resets: a phandle to the reset line of this PHY -- reset-names: must be "phy" -- phy-supply: see phy-bindings.txt in this directory - -Example: - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt deleted file mode 100644 index 7cfc17e2df31..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic G12A USB3 + PCIE Combo PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy" -- #phys-cells: must be 1. The cell number is used to select the phy mode - as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE -- reg: The base address and length of the registers -- clocks: a phandle to the 100MHz reference clock of this PHY -- clock-names: must be "ref_clk" -- resets: phandle to the reset lines for the PHY control -- reset-names: must be "phy" - -Example: - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - #phy-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index 625a22e2f211..8b94aa8f5971 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -82,7 +82,7 @@ gpiom1: gpio@0 { compatible = "microchip,mcp23s17"; gpio-controller; #gpio-cells = <2>; - spi-present-mask = <0x01>; + microchip,spi-present-mask = <0x01>; reg = <0>; spi-max-frequency = <1000000>; }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt deleted file mode 100644 index 28ef6c295c76..000000000000 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt +++ /dev/null @@ -1,19 +0,0 @@ -Amlogic Meson SoC Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "amlogic,meson8b-reset", "amlogic,meson-gxbb-reset" or - "amlogic,meson-axg-reset". -- reg: should contain the register address base -- #reset-cells: 1, see below - -example: - -reset: reset-controller { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml new file mode 100644 index 000000000000..00917d868d58 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson SoC Reset Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs + - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs + - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +examples: + - | + reset-controller@c884404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0xc884404 0x20>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt index c25da39df707..ea0a6a9734c1 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt @@ -11,6 +11,7 @@ Required properties: - compatible: should be one of the following: - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. + - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller. - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt deleted file mode 100644 index 4d403645ac9b..000000000000 --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt +++ /dev/null @@ -1,21 +0,0 @@ -Amlogic Meson Random number generator -===================================== - -Required properties: - -- compatible : should be "amlogic,meson-rng" -- reg : Specifies base physical address and size of the registers. - -Optional properties: - -- clocks : phandle to the following named clocks -- clock-names: Name of core clock, must be "core" - -Example: - -rng { - compatible = "amlogic,meson-rng"; - reg = <0x0 0xc8834000 0x0 0x4>; - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; -}; diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml new file mode 100644 index 000000000000..a9ff3cb35c5e --- /dev/null +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/rng/amlogic,meson-rng.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Random number generator + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + +required: + - compatible + - reg + +examples: + - | + rng@c8834000 { + compatible = "amlogic,meson-rng"; + reg = <0xc8834000 0x4>; + }; diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt index 2bc89f133701..dfdcb5cd2ea8 100644 --- a/Documentation/devicetree/bindings/rng/mtk-rng.txt +++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt @@ -6,6 +6,7 @@ Required properties: "mediatek,mt7622-rng", "mediatek,mt7623-rng" : for MT7622 "mediatek,mt7629-rng", "mediatek,mt7623-rng" : for MT7629 "mediatek,mt7623-rng" : for MT7623 + "mediatek,mt8516-rng", "mediatek,mt7623-rng" : for MT8516 - clocks : list of clock specifiers, corresponding to entries in clock-names property; - clock-names : Should contain "rng" entries; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt deleted file mode 100644 index c06c045126fc..000000000000 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt +++ /dev/null @@ -1,38 +0,0 @@ -Amlogic Meson SoC UART Serial Interface -======================================= - -The Amlogic Meson SoC UART Serial Interface is present on a large range -of SoCs, and can be present either in the "Always-On" power domain or the -"Everything-Else" power domain. - -The particularity of the "Always-On" Serial Interface is that the hardware -is active since power-on and does not need any clock gating and is usable -as very early serial console. - -Required properties: -- compatible : compatible: value should be different for each SoC family as : - - Meson6 : "amlogic,meson6-uart" - - Meson8 : "amlogic,meson8-uart" - - Meson8b : "amlogic,meson8b-uart" - - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart" - eventually followed by : "amlogic,meson-ao-uart" if this UART interface - is in the "Always-On" power domain. -- reg : offset and length of the register set for the device. -- interrupts : identifier to the device interrupt -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock names. -- clock-names : - * "xtal" for external xtal clock identifier - * "pclk" for the bus core clock, either the clk81 clock or the gate clock - * "baud" for the source of the baudrate generator, can be either the xtal - or the pclk. - -e.g. -uart_A: serial@84c0 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84c0 0x0 0x14>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - /* Use xtal as baud rate clock source */ - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml new file mode 100644 index 000000000000..214fe8beddc3 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson SoC UART Serial Interface + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Amlogic Meson SoC UART Serial Interface is present on a large range + of SoCs, and can be present either in the "Always-On" power domain or the + "Everything-Else" power domain. + + The particularity of the "Always-On" Serial Interface is that the hardware + is active since power-on and does not need any clock gating and is usable + as very early serial console. + +properties: + compatible: + oneOf: + - description: Always-on power domain UART controller + items: + - enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart + - description: Everything-Else power domain UART controller + enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: external xtal clock identifier + - description: the bus core clock, either the clk81 clock or the gate clock + - description: the source of the baudrate generator, can be either the xtal or the pclk + + clock-names: + items: + - const: xtal + - const: pclk + - const: baud + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + serial@84c0 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x84c0 0x14>; + interrupts = <26>; + clocks = <&xtal>, <&pclk>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml new file mode 100644 index 000000000000..49b617c98ae7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson SPI Communication Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +allOf: + - $ref: "spi-controller.yaml#" + +description: | + The Meson SPICC is a generic SPI controller for general purpose Full-Duplex + communications with dedicated 16 words RX/TX PIO FIFOs. + +properties: + compatible: + enum: + - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs + - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: input clock for the baud rate generator + items: + - const: core + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + spi@c1108d80 { + compatible = "amlogic,meson-gx-spicc"; + reg = <0xc1108d80 0x80>; + interrupts = <112>; + clocks = <&clk81>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + }; + diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml new file mode 100644 index 000000000000..5f33c39d820b --- /dev/null +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson SPI Flash Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +allOf: + - $ref: "spi-controller.yaml#" + +description: | + The Meson SPIFC is a controller optimized for communication with SPI + NOR memories, without DMA support and a 64-byte unified transmit / + receive buffer. + +properties: + compatible: + enum: + - amlogic,meson6-spifc # SPI Flash Controller on Meson6 and compatible SoCs + - amlogic,meson-gxbb-spifc # SPI Flash Controller on GXBB and compatible SoCs + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + spi@c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + + flash: flash@0 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt deleted file mode 100644 index b7f5e86fed22..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ /dev/null @@ -1,55 +0,0 @@ -Amlogic Meson SPI controllers - -* SPIFC (SPI Flash Controller) - -The Meson SPIFC is a controller optimized for communication with SPI -NOR memories, without DMA support and a 64-byte unified transmit / -receive buffer. - -Required properties: - - compatible: should be "amlogic,meson6-spifc" or "amlogic,meson-gxbb-spifc" - - reg: physical base address and length of the controller registers - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - - spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; - -* SPICC (SPI Communication Controller) - -The Meson SPICC is generic SPI controller for general purpose Full-Duplex -communications with dedicated 16 words RX/TX PIO FIFOs. - -Required properties: - - compatible: should be: - "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. - "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs - - reg: physical base address and length of the controller registers - - interrupts: The interrupt specifier - - clock-names: Must contain "core" - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - -Optional properties: - - resets: phandle of the internal reset line - -See ../spi/spi-bus.txt for more details on SPI bus master and slave devices -required and optional properties. - -Example : - spi@c1108d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0xc1108d80 0x80>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 329b668dac0a..c5877ad800e2 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -443,6 +443,8 @@ patternProperties: description: Innolux Corporation "^inside-secure,.*": description: INSIDE Secure + "^inspur,.*": + description: Inspur Corporation "^intel,.*": description: Intel Corporation "^intercontrol,.*": diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml new file mode 100644 index 000000000000..d7352f709b37 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/watchdog/amlogic,meson-gxbb-wdt.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Meson GXBB SoCs Watchdog timer + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-gxbb-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + A phandle to the clock of this PHY + +required: + - compatible + - reg + - clocks + +examples: + - | + watchdog@98d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x98d0 0x10>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt deleted file mode 100644 index c7fe36fa739c..000000000000 --- a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt +++ /dev/null @@ -1,16 +0,0 @@ -Meson GXBB SoCs Watchdog timer - -Required properties: - -- compatible : should be "amlogic,meson-gxbb-wdt" -- reg : Specifies base physical address and size of the registers. -- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal - is the default clock source. - -Example: - -wdt: watchdog@98d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0 0x98d0 0x0 0x10>; - clocks = <&xtal>; -}; diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 8f71d1e2ac52..f4a638072262 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -141,6 +141,7 @@ It is also possible to run checks with a single schema file by setting the :: + make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml diff --git a/MAINTAINERS b/MAINTAINERS index b2326dece28e..a6ae125d6029 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1400,7 +1400,7 @@ F: drivers/pinctrl/actions/* F: drivers/soc/actions/ F: include/dt-bindings/power/owl-* F: include/linux/soc/actions/ -F: Documentation/devicetree/bindings/arm/actions.txt +F: Documentation/devicetree/bindings/arm/actions.yaml F: Documentation/devicetree/bindings/clock/actions,owl-cmu.txt F: Documentation/devicetree/bindings/dma/owl-dma.txt F: Documentation/devicetree/bindings/i2c/i2c-owl.txt @@ -2166,7 +2166,7 @@ M: Andreas Färber <afaerber@suse.de> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm64/boot/dts/realtek/ -F: Documentation/devicetree/bindings/arm/realtek.txt +F: Documentation/devicetree/bindings/arm/realtek.yaml ARM/RENESAS ARM64 ARCHITECTURE M: Simon Horman <horms@verge.net.au> @@ -1514,8 +1514,10 @@ help: @echo '' @$(if $(dtstree), \ echo 'Devicetree:'; \ - echo '* dtbs - Build device tree blobs for enabled boards'; \ - echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ + echo '* dtbs - Build device tree blobs for enabled boards'; \ + echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ + echo ' dt_binding_check - Validate device tree binding documents'; \ + echo ' dtbs_check - Validate device tree source files';\ echo '') @echo 'Userspace tools targets:' diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index c3ef0cc8f764..b18aac4c105e 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -156,7 +156,7 @@ static int __find_legacy_master_phandle(struct device *dev, void *data) int err; of_for_each_phandle(it, err, dev->of_node, "mmu-masters", - "#stream-id-cells", 0) + "#stream-id-cells", -1) if (it->node == np) { *(void **)data = dev; return 1; diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c index 210b1c7c0bda..b5efd6dac953 100644 --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -427,7 +427,7 @@ static int mtk_iommu_add_device(struct device *dev) int err; of_for_each_phandle(&it, err, dev->of_node, "iommus", - "#iommu-cells", 0) { + "#iommu-cells", -1) { int count = of_phandle_iterator_args(&it, iommu_spec.args, MAX_PHANDLE_ARGS); iommu_spec.np = of_node_get(it.node); diff --git a/drivers/of/base.c b/drivers/of/base.c index 55e7f5bb0549..1d667eb730e1 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1286,6 +1286,13 @@ int of_phandle_iterator_init(struct of_phandle_iterator *it, memset(it, 0, sizeof(*it)); + /* + * one of cell_count or cells_name must be provided to determine the + * argument length. + */ + if (cell_count < 0 && !cells_name) + return -EINVAL; + list = of_get_property(np, list_name, &size); if (!list) return -ENOENT; @@ -1335,11 +1342,20 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it) if (of_property_read_u32(it->node, it->cells_name, &count)) { - pr_err("%pOF: could not get %s for %pOF\n", - it->parent, - it->cells_name, - it->node); - goto err; + /* + * If both cell_count and cells_name is given, + * fall back to cell_count in absence + * of the cells_name property + */ + if (it->cell_count >= 0) { + count = it->cell_count; + } else { + pr_err("%pOF: could not get %s for %pOF\n", + it->parent, + it->cells_name, + it->node); + goto err; + } } } else { count = it->cell_count; @@ -1503,10 +1519,17 @@ int of_parse_phandle_with_args(const struct device_node *np, const char *list_na const char *cells_name, int index, struct of_phandle_args *out_args) { + int cell_count = -1; + if (index < 0) return -EINVAL; - return __of_parse_phandle_with_args(np, list_name, cells_name, 0, - index, out_args); + + /* If cells_name is NULL we assume a cell count of 0 */ + if (!cells_name) + cell_count = 0; + + return __of_parse_phandle_with_args(np, list_name, cells_name, + cell_count, index, out_args); } EXPORT_SYMBOL(of_parse_phandle_with_args); @@ -1588,7 +1611,7 @@ int of_parse_phandle_with_args_map(const struct device_node *np, if (!pass_name) goto free; - ret = __of_parse_phandle_with_args(np, list_name, cells_name, 0, index, + ret = __of_parse_phandle_with_args(np, list_name, cells_name, -1, index, out_args); if (ret) goto free; @@ -1756,7 +1779,24 @@ int of_count_phandle_with_args(const struct device_node *np, const char *list_na struct of_phandle_iterator it; int rc, cur_index = 0; - rc = of_phandle_iterator_init(&it, np, list_name, cells_name, 0); + /* + * If cells_name is NULL we assume a cell count of 0. This makes + * counting the phandles trivial as each 32bit word in the list is a + * phandle and no arguments are to consider. So we don't iterate through + * the list but just use the length to determine the phandle count. + */ + if (!cells_name) { + const __be32 *list; + int size; + + list = of_get_property(np, list_name, &size); + if (!list) + return -ENOENT; + + return size / sizeof(*list); + } + + rc = of_phandle_iterator_init(&it, np, list_name, cells_name, -1); if (rc) return rc; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index e6b175370f2e..480a21e2ed39 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -1044,8 +1044,10 @@ static void __init of_unittest_platform_populate(void) test_bus = platform_device_register_full(&test_bus_info); rc = PTR_ERR_OR_ZERO(test_bus); unittest(!rc, "testbus registration failed; rc=%i\n", rc); - if (rc) + if (rc) { + of_node_put(np); return; + } test_bus->dev.of_node = np; /* diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h index e7c362a81a97..63aff7d8aa45 100644 --- a/include/dt-bindings/reset/hisi,hi6220-resets.h +++ b/include/dt-bindings/reset/hisi,hi6220-resets.h @@ -73,4 +73,11 @@ #define MEDIA_MMU 6 #define MEDIA_XG2RAM1 7 +#define AO_G3D 1 +#define AO_CODECISP 2 +#define AO_MCPU 4 +#define AO_BBPHARQMEM 5 +#define AO_HIFI 8 +#define AO_ACPUSCUL2C 12 + #endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/ |