diff options
395 files changed, 2370 insertions, 1212 deletions
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint index 4abe9f0a1d46..fea5231e1320 100644 --- a/Documentation/devicetree/bindings/.yamllint +++ b/Documentation/devicetree/bindings/.yamllint @@ -1,6 +1,11 @@ extends: relaxed rules: + quoted-strings: + required: only-when-needed + extra-allowed: + - '[$^,[]' + - '^/$' line-length: # 80 chars should be enough, but don't fail if a line is longer max: 110 diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index d6c84b6e7fe6..6216cfb0a188 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2019 Linaro Ltd. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml index cb78cfa56702..c960c8e0a9a5 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index 5fedaed49a1f..6745b4cc8f1c 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index 108460627d9a..f725e6940993 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Embedded Trace Extensions diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml index b1322658063a..87128e7b7d28 100644 --- a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Trace Buffer Extensions @@ -19,7 +19,8 @@ description: | properties: $nodename: - const: "trbe" + const: trbe + compatible: items: - const: arm,trace-buffer-extension diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml index 491eef1e1b10..3b060c36b90c 100644 --- a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml +++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index cdd65881fcdd..8dd6b6446394 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -143,7 +143,7 @@ patternProperties: "simple-bus". If the compatible is placed in the "motherboard-bus" node, it is stricter and always has two compatibles. type: object - $ref: '/schemas/simple-bus.yaml' + $ref: /schemas/simple-bus.yaml unevaluatedProperties: false properties: diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml index c72aab706484..b8c5cacb09bd 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml @@ -2,8 +2,8 @@ # Copyright 2021 Joel Stanley, IBM Corp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ASPEED Secure Boot Controller diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index e17b3d66d6e5..68f717670f78 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 9e6a45eea4e5..0d17cbad9778 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -143,8 +143,10 @@ properties: - arm,cortex-a78ae - arm,cortex-a78c - arm,cortex-a510 + - arm,cortex-a520 - arm,cortex-a710 - arm,cortex-a715 + - arm,cortex-a720 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -158,6 +160,7 @@ properties: - arm,cortex-x1c - arm,cortex-x2 - arm,cortex-x3 + - arm,cortex-x4 - arm,neoverse-e1 - arm,neoverse-n1 - arm,neoverse-n2 diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml index 9d1857c0aa07..e3980b659f63 100644 --- a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Trusted Foundations diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 70e1e5394035..9450b2c8a678 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1257,9 +1257,9 @@ properties: - description: Freescale Vybrid Platform Device Tree Bindings - For the Vybrid SoC familiy all variants with DDR controller are supported, + For the Vybrid SoC family all variants with DDR controller are supported, which is the VF5xx and VF6xx series. Out of historical reasons, in most - places the kernel uses vf610 to refer to the whole familiy. + places the kernel uses vf610 to refer to the whole family. The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 core support. items: diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml index ff378d5cbd32..4a323e8c785d 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml# diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 86b59de7707e..c24ad0968f3e 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml# diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index d84105c7c935..9d5d70c98058 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -21,13 +21,13 @@ The Device Tree node representing this System Controller 0 provides a number of clocks: - a set of core clocks - - a set of gatable clocks + - a set of gateable clocks Those clocks can be referenced by other Device Tree nodes using two cells: - The first cell must be 0 or 1. 0 for the core clocks and 1 for the - gatable clocks. - - The second cell identifies the particular core clock or gatable + gateable clocks. + - The second cell identifies the particular core clock or gateable clocks. The following clocks are available: @@ -38,7 +38,7 @@ The following clocks are available: - 0 3 Core - 0 4 NAND core - 0 5 SDIO core - - Gatable clocks + - Gateable clocks - 1 0 Audio - 1 1 Comm Unit - 1 2 NAND diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt index 8be5978f388d..1c671943ce4d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt @@ -16,7 +16,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The mipi0a controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt index c877bcc1a5c5..f090147b7f1e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt @@ -15,7 +15,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The vcodecsys controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt deleted file mode 100644 index 54fd5ced3401..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/ssbi.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Qualcomm SSBI - -Some Qualcomm MSM devices contain a point-to-point serial bus used to -communicate with a limited range of devices (mostly power management -chips). - -These require the following properties: - -- compatible: "qcom,ssbi" - -- qcom,controller-type - indicates the SSBI bus variant the controller should use to talk - with the slave device. This should be one of "ssbi", "ssbi2", or - "pmic-arbiter". The type chosen is determined by the attached - slave. - -The slave device should be the single child node of the ssbi device -with a compatible field. diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml index 6816bd68f9cf..a8ac4a2d672d 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC l3bridge diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml index 599c65980f5d..5739848000b1 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC SMP control registers diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index 2ec9b5b24d73..ea3c5db6b52d 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 5c08342664ea..3bad47b7b02b 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 2297ad3f4774..d2dce238ff5d 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 ML-AHB interconnect diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index b63ff591ef8f..d083d8ad48b7 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 Platforms System Controller diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 58f322b9585f..e4dd678f4212 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -541,13 +541,13 @@ properties: - const: msi,primo81 - const: allwinner,sun6i-a31s - - description: Emlid Neutis N5 Developper Board + - description: Emlid Neutis N5 Developer Board items: - const: emlid,neutis-n5-devboard - const: emlid,neutis-n5 - const: allwinner,sun50i-h5 - - description: Emlid Neutis N5H3 Developper Board + - description: Emlid Neutis N5H3 Developer Board items: - const: emlid,neutis-n5h3-devboard - const: emlid,neutis-n5h3 diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 2412894a255d..337ddf1113c4 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to most Parallel ATA (PATA, also known as IDE) AT attachment storage devices. - It doesn't constitue a device tree binding specification by itself but is + It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. The PATA (IDE) controller-specific device tree bindings are responsible for diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml index b23c3001991e..3aaefdbe361e 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -43,7 +43,7 @@ properties: brcm,gisb-arb-master-names: $ref: /schemas/types.yaml#/definitions/string-array description: > - String list of the litteral name of the GISB masters. Should match the + String list of the literal name of the GISB masters. Should match the number of bits set in brcm,gisb-master-mask and the order in which they appear from MSB to LSB. diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml index 4157e885c6e7..26362c9006e2 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml @@ -7,10 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NVIDIA Tegra ACONNECT Bus description: | - The Tegra ACONNECT bus is an AXI switch which is used to connnect various + The Tegra ACONNECT bus is an AXI switch which is used to connect various components inside the Audio Processing Engine (APE). All CPU accesses to the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All - devices accessed via the ACONNNECT are described by child-nodes. + devices accessed via the ACONNECT are described by child-nodes. maintainers: - Jon Hunter <jonathanh@nvidia.com> diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml new file mode 100644 index 000000000000..693cfa9696b5 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Single-wire Serial Bus Interface (SSBI) + +description: + Some Qualcomm MSM devices contain a point-to-point serial bus used to + communicate with a limited range of devices (mostly power management + chips). + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + const: qcom,ssbi + + reg: + maxItems: 1 + + qcom,controller-type: + description: + Indicates the SSBI bus variant the controller should use to talk + with the slave device. The type chosen is determined by the attached + slave. + enum: + - ssbi + - ssbi2 + - pmic-arbiter + + pmic: + $ref: /schemas/mfd/qcom-pm8xxx.yaml# + +required: + - compatible + - reg + - qcom,controller-type + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmic { + compatible = "qcom,pm8821"; + interrupt-parent = <&msmgpio>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 3b0548c34791..9f9816fbecbc 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -29,10 +29,8 @@ properties: patternProperties: '^connector@[0-9a-f]+$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml index 52a7b6e7124c..0052bf1e8a6b 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Gatable Oscillator Clock +title: Allwinner A10 Gateable Oscillator Clock maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt index b3205b21c9d0..c9fb9324c634 100644 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -1,7 +1,7 @@ Alphascale Clock Controller -The ACC (Alphascale Clock Controller) is responsible of choising proper -clock source, setting deviders and clock gates. +The ACC (Alphascale Clock Controller) is responsible for choosing proper +clock source, setting dividers and clock gates. Required properties for the ACC node: - compatible: must be "alphascale,asm9260-clock-controller" diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 47570d207215..9a3fbc665606 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -14,7 +14,7 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" - clocks : parent clock phandle -- reg - pll control0 and pll multipler registers +- reg - pll control0 and pll multiplier registers - reg-names : control, multiplier and post-divider. The multiplier and post-divider registers are applicable only for main pll clock - fixed-postdiv : fixed post divider value. If absent, use clkod register bits diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt index fa97c12014ac..8cf8f0ecdd16 100644 --- a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt +++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt @@ -68,7 +68,7 @@ soc { "base_ssp0_clk", "base_sdio_clk"; }; - /* A user of CCU brach clocks */ + /* A user of CCU branch clocks */ uart1: serial@40082000 { ... clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt index 6f1c7b4e4d2c..b6b2547a3d17 100644 --- a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt +++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt @@ -5,8 +5,8 @@ control registers for two low speed clocks. One of the clocks is a 32 kHz oscillator driver with power up/down and clock gating. Next is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. -These clocks are used by the RTC and the Event Router peripherials. -The 32 kHz can also be routed to other peripherials to enable low +These clocks are used by the RTC and the Event Router peripherals. +The 32 kHz can also be routed to other peripherals to enable low power modes. This binding uses the common clock binding: diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt index 61bec1100a94..b8f5c3bbf12b 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max9485.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max9485.txt @@ -12,7 +12,7 @@ requests. Required properties: - compatible: "maxim,max9485" -- clocks: Input clock, must provice 27.000 MHz +- clocks: Input clock, must provide 27.000 MHz - clock-names: Must be set to "xclk" - #clock-cells: From common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml index 9a31981fbeb2..75259f468d54 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -25,7 +25,7 @@ properties: - description: Sleep clock source - description: PCIE 0 Pipe clock source (Optional clock) - description: PCIE 1 Pipe clock source (Optional clock) - - description: PCIE 1 Phy Auxillary clock source (Optional clock) + - description: PCIE 1 Phy Auxiliary clock source (Optional clock) - description: UFS Phy Rx symbol 0 clock source (Optional clock) - description: UFS Phy Rx symbol 1 clock source (Optional clock) - description: UFS Phy Tx symbol 0 clock source (Optional clock) diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml index a466e4e8aacd..57632757d4e6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml @@ -14,7 +14,7 @@ description: There is one ACC register region per CPU within the KPSS remapped region as well as an alias register region that remaps accesses to the ACC associated with the CPU accessing the region. ACC v1 is currently used as a - clock-controller for enabling the cpu and hanling the aux clocks. + clock-controller for enabling the cpu and handling the aux clocks. properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 1703e305e6d8..a0658056c330 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -66,7 +66,7 @@ then: else: description: | Other SC9863a clock nodes should be the child of a syscon node in - which compatible string shoule be: + which compatible string should be: "sprd,sc9863a-glbregs", "syscon", "simple-mfd" The 'reg' property for the clock node is also required if there is a sub diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml index a4ec8dd5ddf1..95c1c6f8b755 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,cdce925.yaml# diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml index 63d976341696..0a9d6a4c4b66 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml# diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index e17425a58621..b33f641f1043 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -8,7 +8,7 @@ parents, one of which can be selected as output. This clock does not gate or adjust the parent rate via a divider or multiplier. By default the "clocks" property lists the parents in the same order -as they are programmed into the regster. E.g: +as they are programmed into the register. E.g: clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt index 63f9f1ac3439..109ffa3a5b66 100644 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -9,7 +9,7 @@ Optional properties: - clocks: list of clock identifiers which are external input clocks to the given clock controller. Please refer the next section to find the input clocks for a given controller. -- clock-names: list of names of clocks which are exteral input clocks to the +- clock-names: list of names of clocks which are external input clocks to the given clock controller. Input clocks for top clock controller: diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 1c4d3eb87763..7c8a3e8430d3 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -30,6 +30,9 @@ properties: - const: samsung,usb-connector-11pin - const: usb-b-connector + reg: + maxItems: 1 + label: description: Symbolic name for the connector. @@ -224,13 +227,13 @@ properties: state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W - 5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during - SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during + SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during SNK_READY for non-pd link. type: boolean dependencies: - sink-vdos-v1: [ 'sink-vdos' ] - sink-vdos: [ 'sink-vdos-v1' ] + sink-vdos-v1: [ sink-vdos ] + sink-vdos: [ sink-vdos-v1 ] required: - compatible @@ -264,7 +267,7 @@ anyOf: - typec-power-opmode - new-source-frs-typec-current -additionalProperties: true +additionalProperties: false examples: # Micro-USB connector with HS lines routed via controller (MUIC). diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 92e1d76e29ee..7da9aa82d837 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - const: qcom,inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index bb828068c3b8..8e665d910e6e 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -34,6 +34,7 @@ properties: - enum: - qcom,ipq6018-qce - qcom,ipq8074-qce + - qcom,ipq9574-qce - qcom,msm8996-qce - qcom,qcm2290-qce - qcom,sdm845-qce diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index f0ef7685550a..ff10a0838ad6 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml# diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml index e300df4b47f3..d27dcb2fef12 100644 --- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml +++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml @@ -18,7 +18,7 @@ description: | each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC). The Exynos PPMU driver uses the devfreq-event class to provide event data to various devfreq devices. The devfreq devices would use the event data when - derterming the current state of each IP. + determining the current state of each IP. properties: compatible: diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index 0398aec488ac..923aea25344c 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -12,7 +12,7 @@ Required properties: Required children nodes: Children nodes are encoding available output ports and their connections - to external devices using the OF graph reprensentation (see ../graph.txt). + to external devices using the OF graph representation (see ../graph.txt). At least one port node is required. Optional properties in grandchild nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index 0b51c64f141a..8747b95ec20d 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -11,7 +11,7 @@ maintainers: description: | This document defines device tree properties for the Synopsys DesignWare MIPI - DSI host controller. It doesn't constitue a device tree binding specification + DSI host controller. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by platform-specific device tree bindings. diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt index 0ab5f0663611..84c75f849891 100644 --- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt +++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -1,4 +1,4 @@ -* Currus Logic CLPS711X Framebuffer +* Cirrus Logic CLPS711X Framebuffer Required properties: - compatible: Shall contain "cirrus,ep7209-fb". diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index a31ec9a4179f..f12558960cd8 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -80,7 +80,8 @@ properties: operating-points-v2: true - opp-table: true + opp-table: + type: object power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index b8d1f2b7d541..c6dbab65d5f7 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index e6b00d7387ce..69d13867b7cf 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 2361da5f6736..52bbe132e6da 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index 9c1f9140c731..7e6687cb002b 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 62fb3e484eb2..288d8babb76a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index 8e9031bbde73..dd6619555a12 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 0f6f08890e7e..6b57ce41c95f 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index a8086ca09d9f..f69196e4cc76 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index 2fe032d0e8f8..91c774f106ce 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index db9f07c6142d..0999ea07f47b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# @@ -11,7 +11,7 @@ maintainers: - Rob Clark <robdclark@gmail.com> description: - This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + This is the bindings documentation for the Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml index 8d3cd46260fb..d5a64c8a921f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml index 3c2b6ed98a56..e320ab1de6de 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml index 414f4e7ebdf1..be6cd8adb3b6 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 2995b84b2cd4..4184b84d4c21 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index ea75f0f95d5c..8137618237ce 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 42ef06edddc4..3b9c103e504a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml index 26dc073bd19a..b0fbe86219d1 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index 078e1d1a7d2f..43500dad66e7 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml index f2c8e16cf067..d19e3bec4600 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml index c239544bc37f..db680fb12b6a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml index 0f7765d832e7..b917064bdf33 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml index 6ecb00920d7f..d6d7ac1b2ef8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml index bf62c2f5325a..510eb6c19364 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index b9f83088f370..17221b62a642 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index 63962a8f2faf..db255b1f4c20 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml index 595a9d56949c..30d36fffaedb 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml index 2b3f3fe9bdf7..13146b3f053c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index 5182e958e069..54cdaa827cd3 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml index acd2ed391b2f..ffa5047e901f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 5cfb9b917e90..e887f031b8be 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml index 1a4e03531a1b..96ef2d9c3512 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 8c89fb7fc8a3..60d4aae1131b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml index da3fd66c564f..2a5d3daed0e1 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index cfad5049a966..bb22940b9385 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml index 99908fbe74f0..16a541fca66f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml index 5390a8e79ad3..48aea8005c86 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml index 67682fe77f10..2e8dbdb5a3d5 100644 --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -19,6 +19,9 @@ description: | second port, therefore the ports must be marked accordingly (with either dual-lvds-odd-pixels or dual-lvds-even-pixels). +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 1b2a1baa26f9..ffb35288ffbb 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml index a4b8569ab81c..74ff772973d6 100644 --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 9f97598efdfa..72463795e4c6 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -20,7 +20,7 @@ description: | The panel itself contains: - AT24C16C EEPROM holding panel identification and timing requirements - AR1021 resistive touch screen controller (optional) - - FT5x6 capacitive touch screnn controller (optional) + - FT5x6 capacitive touch screen controller (optional) - GT911/GT928 capacitive touch screen controller (optional) The above chips share same I2C bus. The EEPROM is factory preprogrammed with diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml index ad7d3575190e..1e4f140f48b8 100644 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index 5b38dc89cb21..0a57a31f4f3d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several classes of - display panels. It doesn't constitue a device tree binding specification by + display panels. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from panel device tree bindings the properties defined in this diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml index 4a36aa64c716..f8dc9929e833 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index 2f0238b770eb..e808215cb39e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml# @@ -66,6 +66,7 @@ properties: compatible: items: - enum: + - saef,sftc154b - sainsmart18 - shineworld,lh133k - const: panel-mipi-dbi-spi diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 90c04cff8281..73674baea75d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml index e8ce2315631a..46fe1014ebc4 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 150e81090af2..5ea74426b1d5 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 444ac2a4772d..fa745a6f4456 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml index 84562a5b710a..d5a8295106c1 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml index fba45091d909..b60b90472d42 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml index 70f0e45c71d6..6f2e22471965 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml @@ -97,7 +97,7 @@ properties: # optional when driving an eDP output nvidia,dpaux: - description: phandle to a DispayPort AUX interface + description: phandle to a DisplayPort AUX interface $ref: /schemas/types.yaml#/definitions/phandle allOf: diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 37400496e086..d9cca3006e73 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -68,7 +68,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: > Bitmask of channels to reserve for devices that need a specific - channel. These channels will only be assigned when explicitely + channel. These channels will only be assigned when explicitly requested by a client. The primary use for this is channels 0 and 1, which can be configured to have special behaviour for NAND/BCH when using programmable firmware. diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt index c6908e7c42cc..447fb44e7abe 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "nvidia,<chip>-apbdma" -- reg: Should contain DMA registers location and length. This shuld include +- reg: Should contain DMA registers location and length. This should include all of the per-channel registers. - interrupts: Should contain all of the per-channel DMA interrupts. - clocks: Must contain one entry, for the module clock. diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml index f1ddcf672261..4f5510b6fa02 100644 --- a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml @@ -48,7 +48,7 @@ properties: qcom,controlled-remotely: type: boolean description: - Indicates that the bam is controlled by remote proccessor i.e. execution + Indicates that the bam is controlled by remote processor i.e. execution environment. qcom,ee: diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml index 1e5752b19a49..7b94d24d5ef4 100644 --- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml +++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml @@ -148,7 +148,7 @@ properties: memcpy-channels: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of u32 elements indicating which channels on the DMA - engine are elegible for memcpy transfers + engine are eligible for memcpy transfers required: - "#dma-cells" diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 2ec37c11286c..98139489d4b5 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at24.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at24.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: I2C EEPROMs compatible with Atmel's AT24 diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 0e31bb36ebb1..1715b0c9feea 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at25.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at25.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: SPI EEPROMs or FRAMs compatible with Atmel's AT25 diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml index 2c8cf6aab19a..6b80518cbf62 100644 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Some Qualcomm PMICs have a "misc" module that can be used to detect when diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 9a785bbaafb7..e6bed7d93e2d 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx Network Processing Engine diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index 910bebe6cfa8..822864488dcb 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -38,6 +38,9 @@ properties: - smc - hvc + "#power-domain-cells": + const: 1 + versal_fpga: $ref: /schemas/fpga/xlnx,versal-fpga.yaml# description: Compatible of the FPGA device. @@ -66,6 +69,17 @@ additionalProperties: false examples: - | + #include <dt-bindings/power/xlnx-zynqmp-power.h> + firmware { + zynqmp_firmware: zynqmp-firmware { + #power-domain-cells = <1>; + }; + }; + + sata { + power-domains = <&zynqmp_firmware PD_SATA>; + }; + versal-firmware { compatible = "xlnx,versal-firmware"; method = "smc"; diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index 6694ef29a267..528df8a0e6d8 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -63,7 +63,7 @@ FPGA Bridge will be disabled. * During Partial Reconfiguration of a specific region, that region's bridge will be used to gate the busses. Traffic to other regions is not affected. - * In some implementations, the FPGA Manager transparantly handles gating the + * In some implementations, the FPGA Manager transparently handles gating the buses, eliminating the need to show the hardware FPGA bridges in the device tree. * An FPGA image may create a set of reprogrammable regions, each having its @@ -466,7 +466,7 @@ It is beyond the scope of this document to fully describe all the FPGA design constraints required to make partial reconfiguration work[1] [2] [3], but a few deserve quick mention. -A persona must have boundary connections that line up with those of the partion +A persona must have boundary connections that line up with those of the partition or region it is designed to go into. During programming, transactions through those connections must be stopped and diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt index e90fb987e25f..7ddf292db144 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt @@ -27,7 +27,7 @@ Required properties: - gpio-controller: Marks the device node as a GPIO controller. - interrupts: The EXT_INT_0 parent interrupt resource must be listed first. - interrupt-cells: Should be two. - - first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N. + - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N. - second cell is used to specify flags. - interrupt-controller: Marks the device node as an interrupt controller. - apm,nr-gpios: Optional, specify number of gpios pin. diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index 209f03bba0a7..eefe7b345286 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -9,7 +9,7 @@ title: Synopsys DesignWare APB GPIO controller description: | Synopsys DesignWare GPIO controllers have a configurable number of ports, each of which are intended to be represented as child nodes with the generic - GPIO-controller properties as desribed in this bindings file. + GPIO-controller properties as described in this bindings file. maintainers: - Hoan Tran <hoan@os.amperecomputing.com> diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml index bd721c839059..7b75d2f92f1b 100644 --- a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml @@ -58,14 +58,14 @@ properties: deprecated: true description: Name of the hwmod associated with the GPIO. Needed on some legacy OMAP - SoCs which have not been converted to the ti,sysc interconnect hierarachy. + SoCs which have not been converted to the ti,sysc interconnect hierarchy. ti,no-reset-on-init: $ref: /schemas/types.yaml#/definitions/flag deprecated: true description: Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which - have not been converted to the ti,sysc interconnect hierarachy. + have not been converted to the ti,sysc interconnect hierarchy. patternProperties: "^(.+-hog(-[0-9]+)?)$": diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 1638cfe90f1c..5eeb29bcdd21 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: X-Powers AXP209 GPIO diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 18e61aff2185..56143f1fe84a 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ZynqMP Mode Pin GPIO controller diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml index a36aec27069c..59c79a6943ec 100644 --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC GPIO controller diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml index 38478dad8b25..584cce3211c0 100644 --- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml# diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml index 0a955c7b9706..5ba60d532fcd 100644 --- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index ca2b47320689..2e45364d0543 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -27,7 +27,7 @@ properties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. If not provided, + The value of current sense resistor in microohms. If not provided, the current reading and overcurrent alert is disabled. adi,shutdown-threshold-microamp: diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 0cf3ed6212a6..6751f9b643b4 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -11,7 +11,7 @@ maintainers: - Nuno Sá <nuno.sa@analog.com> description: |+ - Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + Bindings for the Analog Devices AXI FAN Control driver. Specifications of the core can be found in: https://wiki.analog.com/resources/fpga/docs/axi_fan_control diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml index b39c632956e8..0ad12d245656 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml @@ -46,7 +46,7 @@ patternProperties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. + The value of current sense resistor in microohms. required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt index 3ac02988a1a5..8645cd3b867a 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -45,7 +45,7 @@ Required properties for each child node: - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. - Atleast one Fan tach input channel is required. + At least one Fan tach input channel is required. Examples: diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml index c54b5986b365..e5b24782f448 100644 --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ADC-attached Hardware Sensor diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml index 0e49b3901161..bf3332153ad8 100644 --- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml index b1a4c235376e..e62aff670478 100644 --- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 8226e3b5d028..0b69897f0c63 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lm75.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt index e1b79903f204..758ff398b67b 100644 --- a/Documentation/devicetree/bindings/hwmon/lm87.txt +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -18,7 +18,7 @@ optional properties: in7. Otherwise the pin is set as FAN2 input. - vcc-supply: a Phandle for the regulator supplying power, can be - cofigured to measure 5.0V power supply. Default is 3.3V. + configured to measure 5.0V power supply. Default is 3.3V. Example: diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt index 33fd00a987c7..473b34c876dd 100644 --- a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt @@ -1,4 +1,4 @@ -Lantiq cpu temperatur sensor +Lantiq cpu temperature sensor Requires node properties: - compatible value : diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml index 028d6e570131..f5e104c1b0d0 100644 --- a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml +++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index bd67cfee6d19..56db2292f062 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -42,7 +42,7 @@ properties: reg: items: - description: PVT common registers - - description: PVT temprature sensor registers + - description: PVT temperature sensor registers - description: PVT process detector registers - description: PVT voltage monitor registers diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index 7b9d48d6d6da..6e59c8fdef30 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt index 28f43e929f6d..8523777f560c 100644 --- a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt @@ -23,7 +23,7 @@ Required properties for pwm-fan node fan subnode format: =================== Under fan subnode can be upto 8 child nodes, each child node representing a fan. -Each fan subnode must have one PWM channel and atleast one Fan tach channel. +Each fan subnode must have one PWM channel and at least one Fan tach channel. For PWM channel can be configured cooling-levels to create cooling device. Cooling device could be bound to a thermal zone for the thermal control. diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml index 306f67315835..48d654e52114 100644 --- a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml +++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml index 80df7182ea28..14ac783c9a5f 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml index 159238efa9ed..3d14d5fc96c5 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -13,7 +13,7 @@ description: | The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors designed especially for battery-driven high-volume consumer electronics applications. - For further information refere to Documentation/hwmon/shtc1.rst + For further information refer to Documentation/hwmon/shtc1.rst This binding document describes the binding for the hardware monitor portion of the driver. diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml index f5b34528928d..733cba780186 100644 --- a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml @@ -27,8 +27,8 @@ properties: clock-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus '#thermal-sensor-cells': const: 0 @@ -39,8 +39,8 @@ properties: reset-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml index c5a889e3e27b..7e5b62a0215d 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml index dcbc6fbc3b48..8b5307c875ff 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index fde5225ce012..cdd1489e0c54 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -33,7 +33,7 @@ properties: shunt-resistor-micro-ohms: description: | - If 0, the calibration process will be skiped and the current and power + If 0, the calibration process will be skipped and the current and power measurement engine will not work. Temperature and voltage measurement will continue to work. The shunt value also need to respect: rshunt <= pga-gain * 40 * 1000 * 1000. diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index bce68a326919..ebc8d466c1aa 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -26,7 +26,7 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - description: The value of curent sense resistor in microohms. + description: The value of current sense resistor in microohms. default: 255000 minimum: 250000 maximum: 255000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt index 60b7cda15dd2..7b6b3b8d0d11 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt @@ -10,7 +10,7 @@ Required properties: "source" for I2C source (parent) clock, "enable" for I2C module enable clock. - clocks: Should contain a clock specifier for each entry in clock-names. -- clock-frequency: Constains desired I2C bus clock frequency in Hz. +- clock-frequency: Contains desired I2C bus clock frequency in Hz. - #address-cells: Should be 1 to describe address cells for I2C device address. - #size-cells: Should be 0 means no size cell for I2C device address. diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml index c002afdbfc7c..5dda8cb44cdb 100644 --- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml +++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MIPI I3C HCI diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index c8659c5eba2a..cb31e75ba680 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -36,8 +36,8 @@ properties: maxItems: 2 items: enum: - - "INT1" - - "INT2" + - INT1 + - INT2 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml index e6a1f915b542..1f30a8569187 100644 --- a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml @@ -56,8 +56,8 @@ properties: String corresponding to an identifier from atmel,adc-res-names property. If not specified, the highest resolution will be used. enum: - - "lowres" - - "highres" + - lowres + - highres atmel,adc-sleep-mode: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index be93c109d6ac..8cbad7e792b6 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -57,7 +57,7 @@ description: | |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage |28 |PS Auxiliary voltage measurement (supply6). |Voltage |29 |PL VCCADC voltage measurement (vccams). |Voltage - |30 |Differential analog input signal voltage measurment. |Voltage + |30 |Differential analog input signal voltage measurement. |Voltage |31 |VUser0 voltage measurement (supply7). |Voltage |32 |VUser1 voltage measurement (supply8). |Voltage |33 |VUser2 voltage measurement (supply9). |Voltage diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml index 2155d3f5666c..3d7074fd17be 100644 --- a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml +++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog device AD7150 and similar capacitance to digital convertors. +title: Analog device AD7150 and similar capacitance to digital converters. maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml index f845b41d74c4..b3a10af86d76 100644 --- a/Documentation/devicetree/bindings/iio/common.yaml +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several iio - sensors. It doesn't constitue a device tree binding specification by itself but + sensors. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from sensor tree bindings the properties defined in this diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml index ab86daa2c56e..d17601dbc498 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml @@ -33,7 +33,7 @@ properties: items: - const: lo_in description: - External clock that provides the Local Oscilator input. + External clock that provides the Local Oscillator input. vcm-supply: description: diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index a2bc1fa92da0..79e75a8675cb 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -10,7 +10,7 @@ maintainers: - Eugene Zaikonnikov <ez@norophonic.com> description: | - Relative humidity and tempereature sensors on I2C bus + Relative humidity and temperature sensors on I2C bus Datasheets are available at: http://www.ti.com/product/HDC2010/datasheet diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index c0a923febf13..b31f8120f14e 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -47,7 +47,7 @@ properties: reset-gpios: description: Optional GPIO for resetting the device. - If not present the device is not resetted during the probe. + If not present the device is not reset during the probe. maxItems: 1 honeywell,pmin-pascal: diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml index c999994e19e3..9567993ce480 100644 --- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml @@ -10,7 +10,7 @@ maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> description: - This lightening distance sensor uses an I2C or SPI interface. The + This lightning distance sensor uses an I2C or SPI interface. The binding currently only covers the SPI option. properties: diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index e450821a741d..fff7e3d83a02 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -97,7 +97,7 @@ properties: interrupts: description: interrupt line(s) connected to the DRDY line(s) and/or the - Intertial interrupt lines INT1 and INT2 if these exist. This means up to + Inertial interrupt lines INT1 and INT2 if these exist. This means up to three interrupts, and the DRDY must be the first one if it exists on the package. The trigger edge of the interrupts is sometimes software configurable in the hardware so the operating system should parse this diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml index 2a9bb6ace021..24dc2d69613f 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/input/elan,ekth3000.yaml# diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt deleted file mode 100644 index 9afffbdf6e28..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 2D Sensor Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain 2D sensors using Function 11 or -Function 12. Complete documentation for transports and other functions -can be found in: -Documentation/devicetree/bindings/input/rmi4. - -RMI4 Function 11 and Function 12 are for 2D touch position sensing. -Additional documentation for F11 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touchscreen -- touchscreen-inverted-x -- touchscreen-inverted-y -- touchscreen-swapped-x-y -- touchscreen-x-mm -- touchscreen-y-mm - -Optional Properties: -- syna,clip-x-low: Sets a minimum value for X. -- syna,clip-y-low: Sets a minimum value for Y. -- syna,clip-x-high: Sets a maximum value for X. -- syna,clip-y-high: Sets a maximum value for Y. -- syna,offset-x: Add an offset to X. -- syna,offset-y: Add an offset to Y. -- syna,delta-x-threshold: Set the minimum distance on the X axis required - to generate an interrupt in reduced reporting - mode. -- syna,delta-y-threshold: Set the minimum distance on the Y axis required - to generate an interrupt in reduced reporting - mode. -- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad. -- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to - disable reporing absolute position data. -- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero - command. - - -Example of a RMI4 I2C device with F11: -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt deleted file mode 100644 index 079cad2b6843..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt +++ /dev/null @@ -1,39 +0,0 @@ -Synaptics RMI4 F01 Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain Function 1. Complete documentation -for transports and other functions can be found in: -Documentation/devicetree/bindings/input/rmi4. - -Additional documentation for F01 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Properties: -- syna,nosleep-mode: If set the device will run at full power without sleeping. - nosleep has 3 modes, 0 will not change the default - setting, 1 will disable nosleep (allow sleeping), - and 2 will enable nosleep (disabling sleep). -- syna,wakeup-threshold: Defines the amplitude of the disturbance to the - background capacitance that will cause the - device to wake from dozing. -- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the - first doze cycle. -- syna,doze-interval-ms: The time period that the device sleeps between finger - activity. - - -Example of a RMI4 I2C device with F01: - Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt deleted file mode 100644 index dcb012f5b3ee..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt +++ /dev/null @@ -1,61 +0,0 @@ -Synaptics RMI4 I2C Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the I2C transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-i2c -- reg: I2C address -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- syna,reset-delay-ms: The number of milliseconds to wait after resetting the - device. - -- syna,startup-delay-ms: The number of milliseconds to wait after powering on - the device. - -- vdd-supply: VDD power supply. -See ../regulator/regulator.txt - -- vio-supply: VIO power supply -See ../regulator/regulator.txt - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt deleted file mode 100644 index 632f473db65b..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 SPI Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the SPI transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-spi -- reg: Chip select address for the device -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- spi-rx-delay-us: microsecond delay after a read transfer. -- spi-tx-delay-us: microsecond delay after a write transfer. - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - spi@7000d800 { - rmi4-spi-dev@0 { - compatible = "syna,rmi4-spi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <4000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(K, 2) 0x2>; - spi-rx-delay-us = <30>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml new file mode 100644 index 000000000000..4d4e1a8e36be --- /dev/null +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/syna,rmi4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics RMI4 compliant devices + +maintainers: + - Jason A. Donenfeld <Jason@zx2c4.com> + - Matthias Schiffer <matthias.schiffer@ew.tq-group.com + - Vincent Huang <vincent.huang@tw.synaptics.com> + +description: | + The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4 + devices using different transports (I2C, SPI) and different functions (e.g. + Function 1, 2D sensors using Function 11 or 12). + +properties: + compatible: + enum: + - syna,rmi4-i2c + - syna,rmi4-spi + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Active low signal + + spi-cpha: true + spi-cpol: true + + syna,reset-delay-ms: + description: + Delay to wait after resetting the device. + + syna,startup-delay-ms: + description: + Delay to wait after powering on the device. + + vdd-supply: true + vio-supply: true + + rmi4-f01@1: + type: object + additionalProperties: false + description: + Function 1 + + properties: + reg: + maxItems: 1 + + syna,nosleep-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + If set the device will run at full power without sleeping. nosleep + has 3 modes, 0 will not change the default setting, 1 will disable + nosleep (allow sleeping), and 2 will enable nosleep (disabling + sleep). + + syna,wakeup-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the amplitude of the disturbance to the background + capacitance that will cause the device to wake from dozing. + + syna,doze-holdoff-ms: + description: + The delay to wait after the last finger lift and the first doze + cycle. + + syna,doze-interval-ms: + description: + The time period that the device sleeps between finger activity. + + required: + - reg + +patternProperties: + "^rmi4-f1[12]@1[12]$": + type: object + unevaluatedProperties: false + $ref: /schemas/input/touchscreen/touchscreen.yaml# + description: + RMI4 Function 11 and Function 12 are for 2D touch position sensing. + + properties: + reg: + maxItems: 1 + + syna,clip-x-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for X. + + syna,clip-y-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for Y. + + syna,clip-x-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for X. + + syna,clip-y-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for Y. + + syna,offset-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to X. + + syna,offset-y: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to Y. + + syna,delta-x-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the X axis required to generate an interrupt in + reduced reporting mode. + + syna,delta-y-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the Y axis required to generate an interrupt in + reduced reporting mode. + + syna,sensor-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: | + Sensor type: 1 for touchscreen 2 for touchpad. + + syna,disable-report-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mask for disabling posiiton reporting. Used to disable reporing + absolute position data. + + syna,rezero-wait-ms: + description: + Time to wait after issuing a rezero command. + + required: + - reg + + "^rmi4-f[0-9a-f]+@[0-9a-f]+$": + type: object + description: + Other functions, not documented yet. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: syna,rmi4-i2c + then: + properties: + spi-rx-delay-us: false + spi-tx-delay-us: false + else: + properties: + syna,reset-delay-ms: false + syna,startup-delay-ms: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + syna,startup-delay-ms = <100>; + vdd-supply = <&tsp_vdd>; + vio-supply = <&ldo32_reg>; + + pinctrl-0 = <&touch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <4000000>; + spi-rx-delay-us = <30>; + spi-cpha; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt index ed00f61b8c08..210486a3fb11 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -6,7 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms. Optional properties: -- gpios: the interrupt gpio the chip is connected to (trough the penirq pin). +- gpios: the interrupt gpio the chip is connected to (through the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). - interrupts: (gpio) interrupt to which the chip is connected diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 39e64c7f6360..2bc38479a41e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -49,7 +49,7 @@ properties: The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. Extented SPI interrupts are in the range [0-1023]. + range [0-15]. Extended SPI interrupts are in the range [0-1023]. Extended PPI interrupts are in the range [0-127]. The 3rd cell is the flags, encoded as follows: diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 0f1af5a1c12e..bdd173056f72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -70,7 +70,7 @@ Bank 1: 25: DMA9 26: DMA10 27: DMA11-14 - shared interrupt for DMA 11 to 14 -28: DMAALL - triggers on all dma interrupts (including chanel 15) +28: DMAALL - triggers on all dma interrupts (including channel 15) 29: AUX 30: ARM 31: VPUDMA diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml index c680de1cbd56..786f2426399b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -59,7 +59,7 @@ description: > .. 31 ........................ X - The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms + The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms on many BCM338x/BCM63xx chipsets. It has the following properties: - outputs a single interrupt signal to its interrupt controller parent diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index a106ba6e810b..4847b04be1a1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -31,6 +31,7 @@ properties: - qcom,sc7180-pdc - qcom,sc7280-pdc - qcom,sc8280xp-pdc + - qcom,sdm670-pdc - qcom,sdm845-pdc - qcom,sdx55-pdc - qcom,sdx65-pdc diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index 65523d9459d8..3cd5a1822e14 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml index be1539d234f9..3528b81daa25 100644 --- a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml index 4ff6fabfcb30..129e32c4c774 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -41,7 +41,7 @@ properties: - description: STR register aspeed,lpc-io-reg: - $ref: '/schemas/types.yaml#/definitions/uint32-array' + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 2 description: | @@ -50,7 +50,7 @@ properties: status address may be optionally provided. aspeed,lpc-interrupts: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | @@ -63,12 +63,12 @@ properties: kcs_chan: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The LPC channel number in the controller kcs_addr: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The host CPU IO map address required: diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml index 3f25cdb4e99b..52647bff31af 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml @@ -18,7 +18,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index c1b4bf95ef99..4bffa3d86128 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -20,7 +20,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml index 5533b6562d92..16fc98e71233 100644 --- a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml @@ -66,7 +66,7 @@ properties: mediatek,bled-ocp-shutdown: description: | - Enable the backlight shutdown when OCP level triggerred. + Enable the backlight shutdown when OCP level triggered. type: boolean mediatek,bled-ocp-microamp: diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index 058be1fedbc8..e9d4514d0166 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -106,7 +106,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: maximum: 8 @@ -129,7 +129,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: description: | diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index e6f1999cb22f..ea84ad426df1 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -56,7 +56,7 @@ properties: description: > A list of integer pairs, where each pair represent the dtest line the particular channel should be connected to and the flags denoting how the - value should be outputed, as defined in the datasheet. The number of + value should be outputted, as defined in the datasheet. The number of pairs should be the same as the number of channels. items: items: diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt index 752ae6b00d26..c80065a1eb97 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -29,7 +29,7 @@ Required properties: where N is the value specified by 2nd cell above. If FlexRM does not get required number of completion messages in time specified by this cell then it will inject one MSI interrupt - to CPU provided atleast one completion message is available. + to CPU provided at least one completion message is available. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml index d433e496ec6e..1a2001e58880 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# @@ -159,7 +159,7 @@ properties: a corresponding sysc interconnect node. This property is only needed on some legacy OMAP SoCs which have not - yet been converted to the ti,sysc interconnect hierarachy, but is + yet been converted to the ti,sysc interconnect hierarchy, but is otherwise considered obsolete. patternProperties: diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml index b8ba85a2416c..c5cab549ee8e 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -12,7 +12,7 @@ maintainers: description: |- The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 stream. The direction can be either parallel-in -> csi-out or csi-in -> - parallel-out The chip is programmable trough I2C and SPI but the SPI + parallel-out The chip is programmable through I2C and SPI but the SPI interface is only supported in parallel-in -> csi-out mode. Note that the current device tree bindings only support the diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 719b2995dc17..94b908ace53c 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -53,7 +53,7 @@ Optional Connector Properties: ============================== - sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechnism. Please look at + instead of using the autodetection mechanism. Please look at [1] for more information. [1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index dca9b0c5e106..a500a585c692 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -36,7 +36,7 @@ description: | controls the information of each hardware independent which include clk/power/irq. There are two workqueues in parent device: lat workqueue and core workqueue. They are used - to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer, + to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer, then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, writing the result to output buffer, disable hardware when core decode done. These two diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index 2350bf4b370e..9410f13ca97c 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -40,7 +40,7 @@ properties: properties: compatible: - const: "venus-decoder" + const: venus-decoder required: - compatible @@ -52,7 +52,7 @@ properties: properties: compatible: - const: "venus-encoder" + const: venus-encoder required: - compatible diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index aee7f6cf1300..2381660b324c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -67,7 +67,7 @@ properties: minimum: 0 maximum: 31 description: the hardware id of this larb. It's only required when this - hardward id is not consecutive from its M4U point of view. + hardware id is not consecutive from its M4U point of view. required: - compatible diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml index fb4920397d08..4e4af3cfc0fe 100644 --- a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -152,7 +152,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: When the DRAM type is DDR3, this parameter defines the phy side CA line - (incluing command line, address line and clock line) drive strength. + (including command line, address line and clock line) drive strength. default: 40 rockchip,phy_ddr3_dq_drv: @@ -305,7 +305,7 @@ properties: description: Defines the self-refresh power down idle period in which memories are placed into self-refresh power down mode if bus is idle for - srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only. + srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only. rockchip,standby-idle-ns: description: diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml index 75143db51411..b74ad9a3305c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml @@ -12,7 +12,7 @@ maintainers: description: The Zynq DDR ECC controller has an optional ECC support in half-bus width - (16-bit) configuration. It is cappable of correcting single bit ECC errors + (16-bit) configuration. It is capable of correcting single bit ECC errors and detecting double bit ECC errors. properties: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml index 750996d9a175..5dfe77aca167 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -27,7 +27,7 @@ description: as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management and bus snoop configuration. - * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom hardware management protocols for handover between the host and baseboard management controller. diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index e6a2387d8650..9e4eed34dae8 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8008 PMIC maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml index 10f207a38178..b7b323b1a4f2 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -34,7 +34,7 @@ properties: BD9576 and BD9573 VOUT1 regulator enable state can be individually controlled by a GPIO. This is dictated by state of vout1-en pin during the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 - enable sate is controlled via this pin. Set this property if vout1-en + enable state is controlled via this pin. Set this property if vout1-en is wired to be down at PMIC start-up. type: boolean @@ -61,7 +61,7 @@ properties: rohm,hw-timeout-ms: maxItems: 2 description: - Watchog timeout in milliseconds. If single value is given it is + Watchdog timeout in milliseconds. If single value is given it is the maximum timeout. Eg. if pinging watchdog is not done within this time limit the watchdog will be triggered. If two values are given watchdog is configured in "window mode". Then first value is limit for short-ping diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index 6c8d42f27fe8..94f9767a927d 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -313,7 +313,7 @@ properties: - const: audioclk stericsson,earpeice-cmv: - description: Earpeice voltage + description: Earpiece voltage $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 950, 1100, 1270, 1580 ] @@ -337,39 +337,39 @@ properties: with power. ab8500_ldo_aux1: - description: The voltage for the auxilary LDO regulator 1 + description: The voltage for the auxiliary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux2: - description: The voltage for the auxilary LDO regulator 2 + description: The voltage for the auxiliary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux3: - description: The voltage for the auxilary LDO regulator 3 + description: The voltage for the auxiliary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux4: - description: The voltage for the auxilary LDO regulator 4 + description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux5: - description: The voltage for the auxilary LDO regulator 5 + description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux6: - description: The voltage for the auxilary LDO regulator 6 + description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# @@ -378,7 +378,7 @@ properties: # There is never any AUX7 regulator which is confusing ab8500_ldo_aux8: - description: The voltage for the auxilary LDO regulator 8 + description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml index 1d4d88f7e82d..a66d58b4d1f2 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -107,7 +107,7 @@ properties: $ref: ../regulator/regulator.yaml# db8500_vrf1: - description: RF transciever voltage regulator. + description: RF transceiver voltage regulator. type: object $ref: ../regulator/regulator.yaml# diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml index 20b5836efd90..358ac8cd4d1d 100644 --- a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson 2K1000 PM Controller diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml index 7c0f9022202c..3e3a3705e879 100644 --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson RS780E PCH ACPI Controller diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 38ab0499102d..36a9dbdf3f03 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx AHB Queue Manager diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index 3ee758886558..3a8e74894ae0 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -71,8 +71,8 @@ properties: marvell,xenon-phy-type: $ref: /schemas/types.yaml#/definitions/string enum: - - "emmc 5.1 phy" - - "emmc 5.0 phy" + - emmc 5.1 phy + - emmc 5.0 phy description: | Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt index 5f5c2bec2b8c..66a78eae4dc9 100644 --- a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. -In addition to the properties described in this docuent, the details +In addition to the properties described in this document, the details described in mmc.txt are supported. Examples: diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 57d077c0b7c1..7a0e9dcdc444 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -95,7 +95,7 @@ while in suspend. | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | ------ ------- ----- -In suspend the fclk is off and the module is disfunctional. Even register reads +In suspend the fclk is off and the module is dysfunctional. Even register reads will fail. A small logic in the host will request fclk restore, when an external event is detected. Once the clock is restored, the host detects the event normally. Since am33xx doesn't have this line it never wakes from diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml index 00882892f47e..0ff32bd00bf6 100644 --- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip 48l640 (and similar) serial EERAM diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index d0935d2afef8..284cddb3118e 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,4 +1,4 @@ -* Broadcom Starfighter 2 integrated swich +* Broadcom Starfighter 2 integrated switch See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt index 77027bf6460a..042200cf4419 100644 --- a/Documentation/devicetree/bindings/net/can/cc770.txt +++ b/Documentation/devicetree/bindings/net/can/cc770.txt @@ -26,7 +26,7 @@ Optional properties: will be disabled. - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified, - a resonable value will be calculated. + a reasonable value will be calculated. - bosch,disconnect-rx0-input : see data sheet. diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index c745407f2f68..b06c416893ff 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom Starfighter 2 integrated swich +title: Broadcom Starfighter 2 integrated switch maintainers: - Florian Fainelli <f.fainelli@gmail.com> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index c1241c8a3b77..8fb2a6ee7e5b 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -110,7 +110,7 @@ properties: $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after + TX/RX lanes. This property allows the PHY to work correctly after e.g. wrong bootstrap configuration caused by issues in PCB layout design. diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml new file mode 100644 index 000000000000..9bcbacb6640d --- /dev/null +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTGMAC100 gigabit ethernet controller + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Po-Yu Chuang <ratbert@faraday-tech.com> + +properties: + compatible: + oneOf: + - const: faraday,ftgmac100 + - items: + - enum: + - aspeed,ast2400-mac + - aspeed,ast2500-mac + - aspeed,ast2600-mac + - const: faraday,ftgmac100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: MAC IP clock + - description: RMII RCLK gate for AST2500/2600 + + clock-names: + minItems: 1 + items: + - const: MACCLK + - const: RCLK + + phy-mode: + enum: + - rgmii + - rmii + + phy-handle: true + + use-ncsi: + description: + Use the NC-SI stack instead of an MDIO PHY. Currently assumes + rmii (100bT) but kept as a separate property in case NC-SI grows support + for a gigabit link. + type: boolean + + no-hw-checksum: + description: + Used to disable HW checksum support. Here for backward + compatibility as the driver now should have correct defaults based on + the SoC. + type: boolean + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@1e660000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + use-ncsi; + }; + + ethernet@1e680000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <2>; + + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt deleted file mode 100644 index 29234021f601..000000000000 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Faraday Technology FTGMAC100 gigabit ethernet controller - -Required properties: -- compatible: "faraday,ftgmac100" - - Must also contain one of these if used as part of an Aspeed AST2400 - or 2500 family SoC as they have some subtle tweaks to the - implementation: - - - "aspeed,ast2400-mac" - - "aspeed,ast2500-mac" - - "aspeed,ast2600-mac" - -- reg: Address and length of the register set for the device -- interrupts: Should contain ethernet controller interrupt - -Optional properties: -- phy-handle: See ethernet.txt file in the same directory. -- phy-mode: See ethernet.txt file in the same directory. If the property is - absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for - aspeed parts. Other (unknown) parts will accept any value. -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes - rmii (100bT) but kept as a separate property in case NC-SI grows support - for a gigabit link. -- no-hw-checksum: Used to disable HW checksum support. Here for backward - compatibility as the driver now should have correct defaults based on - the SoC. -- clocks: In accordance with the generic clock bindings. Must describe the MAC - IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The - required MAC clock must be the first cell. -- clock-names: - - - "MACCLK": The MAC IP clock - - "RCLK": Clock gate for the RMII RCLK - -Optional subnodes: -- mdio: See mdio.txt file in the same directory. - -Example: - - mac0: ethernet@1e660000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e660000 0x180>; - interrupts = <2>; - use-ncsi; - }; - -Example with phy-handle: - - mac1: ethernet@1e680000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e680000 0x180>; - interrupts = <2>; - - phy-handle = <&phy>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 5aa320c8af5a..ed9d845f6008 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -129,7 +129,7 @@ properties: type: boolean description: If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled. - Otherwise, PHY WOL is perferred. + Otherwise, PHY WOL is preferred. required: - compatible diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml index 0b97e14d947f..77c9bbf987e1 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -33,7 +33,7 @@ properties: - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) - - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Device ID) - usb424,9e00 # SMSC9500A USB Ethernet Device - usb424,9e01 # SMSC9505A USB Ethernet Device - usb424,9e08 # SMSC LAN89530 USB Ethernet Device diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 8e9a95f24c80..89663fdd3eba 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -37,13 +37,13 @@ properties: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on falling edge. + triggered on falling edge. i2c-int-rising: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on rising edge. + triggered on rising edge. break-control: type: boolean diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt index 2cff6d8a585a..b9381b761a27 100644 --- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt +++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt @@ -5,10 +5,10 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain the SXGBE interrupts These interrupts are ordered by fixed and follows variable - trasmit DMA interrupts, receive DMA interrupts and lpi interrupt. + transmit DMA interrupts, receive DMA interrupts and lpi interrupt. index 0 - this is fixed common interrupt of SXGBE and it is always available. - index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts + index 1 to 25 - 8 variable transmit interrupts, variable 16 receive interrupts and 1 optional lpi interrupt. - phy-mode: String, operation mode of the PHY interface. Supported values are: "sgmii", "xgmii". diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt index ad3c6e109ce1..bb0224a3e826 100644 --- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -110,7 +110,7 @@ Optional properties: It depends on the SoC configuration. - snps,read-requests: Number of read requests that the AXI port can issue. It depends on the SoC configuration. -- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB +- snps,burst-map: Bitmap of allowed AXI burst lengths, with the LSB representing 4, then 8 etc. - snps,txpbl: DMA Programmable burst length for the TX DMA - snps,rxpbl: DMA Programmable burst length for the RX DMA diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index 42cd075456ab..e16287c06e5e 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -21,7 +21,7 @@ Optional properties: MAC can generate it. - st,tx-retime-src: This specifies which clk is wired up to the mac for retimeing tx lines. This is totally board dependent and can take one of the - posssible values from "txclk", "clk_125" or "clkgen". + possible values from "txclk", "clk_125" or "clkgen". If not passed, the internal clock will be used by default. - sti-ethclk: this is the phy clock. - sti-clkconf: this is an extra sysconfig register, available in new SoCs, diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt index b95e831bcba3..3e9cabe667b3 100644 --- a/Documentation/devicetree/bindings/nios2/nios2.txt +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -23,7 +23,7 @@ Required properties: - altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB. - altr,tlb-num-entries: Specifies the number of entries in the TLB. - altr,tlb-ptr-sz: Specifies size of TLB pointer. -- altr,has-mul: Specifies CPU hardware multipy support, should be 1. +- altr,has-mul: Specifies CPU hardware multiply support, should be 1. - altr,has-mmu: Specifies CPU support MMU support, should be 1. - altr,has-initda: Specifies CPU support initda instruction, should be 1. - altr,reset-addr: Specifies CPU reset address diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml index 714a6538cc7c..ee8ac322332d 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -14,7 +14,7 @@ description: infrastructure shall provide a non-volatile memory with a table whose the content is well specified and gives many information about the manufacturer (name, country of manufacture, etc) as well as device caracteristics (serial - number, hardware version, mac addresses, etc). The underlaying device type + number, hardware version, mac addresses, etc). The underlying device type (flash, EEPROM,...) is not specified. The exact location of each value is also dynamic and should be discovered at run time because it depends on the parameters the manufacturer decided to embed. diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index a4f61ced5e88..1ae8dcfa072c 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -60,6 +60,61 @@ properties: - const: aux - const: pipe + interrupts: + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + additionalProperties: false + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + msi-map: true num-lanes: true @@ -108,6 +163,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/interrupt-controller/arm-gic.h> bus { #address-cells = <2>; @@ -127,6 +183,12 @@ examples: "aclk_dbi", "pclk", "aux"; device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; linux,pci-domain = <2>; max-link-speed = <2>; msi-map = <0x2000 &its 0x2000 0x1000>; @@ -140,6 +202,14 @@ examples: reset-names = "pipe"; #address-cells = <3>; #size-cells = <2>; + + legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 1a83f0f65f19..8bbdeb8821f8 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -25,6 +25,15 @@ select: allOf: - $ref: /schemas/pci/pci-bus.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + - if: + not: + required: + - msi-map + then: + properties: + interrupt-names: + contains: + const: msi properties: reg: @@ -188,14 +197,15 @@ properties: Link Control register). const: bw_mg - description: + Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for + details. + const: legacy + - description: Vendor-specific IRQ names. Consider using the generic names above for new bindings. oneOf: - description: See native "app" IRQ for details - enum: [ intr ] - allOf: - - contains: - const: msi + enum: [ intr, sys, pmc, msg, err ] additionalProperties: true diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml index b35c4d256e40..99eac888ae03 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml# diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml index d16bd6e47f90..e9237c58ce45 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml# diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt index 0d70c8341095..104953e849e7 100644 --- a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt @@ -14,7 +14,7 @@ Required properties: - #size-cells: Must be 0. The INNO USB2 PHY device should be a child node of peripheral controller that -contains the PHY configuration register, and each device suppports up to 2 PHY +contains the PHY configuration register, and each device supports up to 2 PHY ports which are represented as child nodes of INNO USB2 PHY device. Required properties for PHY port node: diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt index afbc7e24a3de..c7970c07ee32 100644 --- a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Must contain an entry for each entry in clock-names. See ../clock/clock-bindings.txt for details. - clock-names: Must include "usb_phy". - - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,cr-top: Must contain a phandle to the CR_TOP syscon node. - img,refclk: Indicates the reference clock source for the USB PHY. See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt index 660a13ca90b3..da94426aa694 100644 --- a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt @@ -4,7 +4,7 @@ Required properties: - compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" - reg: base address and length of the registers - clocks - A single clock. From common clock binding. -- #phys-cells: should be 0. From commmon phy binding. +- #phys-cells: should be 0. From common phy binding. - resets: reference to the reset controller Example: diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml index 0e6505e9da50..5ac994b3c0aa 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> description: | - The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich + The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. properties: diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 9ea30eaba314..3f16ff14484d 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -59,7 +59,7 @@ properties: description: GPIO to signal Type-C cable orientation for lane swap. If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to - achieve the funtionality of an external type-C plug flip mux. + achieve the functionality of an external type-C plug flip mux. typec-dir-debounce-ms: minimum: 100 diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 60c9d0ac75e6..7c7936b89f2c 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -62,7 +62,7 @@ Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. -Recommended properies: +Recommended properties: - syscon-phy-power : phandle/offset pair. Phandle to the system control module and the register offset to power on/off the PHY. diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 467016cbb037..450240570314 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -97,7 +97,7 @@ patternProperties: # It's pretty scary, but the basic idea is that: # - One node name can start with either s- or r- for PRCM nodes, # - Then, the name itself can be any repetition of <string>- (to - # accomodate with nodes like uart4-rts-cts-pins), where each + # accommodate with nodes like uart4-rts-cts-pins), where each # string can be either starting with 'p' but in a string longer # than 3, or something that doesn't start with 'p', # - Then, the bank name is optional and will be between pa and pg, diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 739a08f00467..beb769e887c7 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -11,7 +11,7 @@ maintainers: description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) - controller allows assiging any of 256 possible functions to any of + controller allows assigning any of 256 possible functions to any of 48 IO pins of the SoC. Pin function configuration is performed on a per-pin basis. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 7f0e2d6cd6d9..3bbc00df5548 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -159,7 +159,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml index 601d86aecdd4..68e91c05f122 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml @@ -130,7 +130,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml index 10717cee9058..74d52a741f6f 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -386,7 +386,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -398,7 +398,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 0f615ada290a..5ad65135fe1c 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -332,7 +332,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -344,7 +344,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index ff24cf29eea7..8507bd15f243 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -143,7 +143,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml index 61b33b5416f5..7b43e7857281 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -149,7 +149,7 @@ patternProperties: deprecated: true description: | DEPRECATED: Please use bias-pull-up instead. - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt index 511fc234558b..28fbca180068 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt @@ -38,7 +38,7 @@ Valid values for function properties are: gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in, reference-out -Theres is also customised properties for the GPIO1, GPIO2 and GPIO3. These +There are also customised properties for the GPIO1, GPIO2 and GPIO3. These customised properties are required to configure FPS configuration parameters of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index 939cb5b6ffea..6ad49e51c72e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -40,7 +40,7 @@ on default. Valid values for function properties are: gpio. -Theres is also not customised properties for any GPIO. +There are also not customised properties for any GPIO. Example: -------- diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt index b1cea7a3a071..779b8ef0f6e6 100644 --- a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt @@ -8,7 +8,7 @@ to configure for some global common configuration, such as domain pad driving level, system control select and so on ("domain pad driving level": One pin can output 3.0v or 1.8v, depending on the related domain pad driving selection, if the related domain pad -slect 3.0v, then the pin can output 3.0v. "system control" is used +select 3.0v, then the pin can output 3.0v. "system control" is used to choose one function (like: UART0) for which system, since we have several systems (AP/CP/CM4) on one SoC.). diff --git a/Documentation/devicetree/bindings/pmem/pmem-region.txt b/Documentation/devicetree/bindings/pmem/pmem-region.txt index 5cfa4f016a00..cd79975e85ec 100644 --- a/Documentation/devicetree/bindings/pmem/pmem-region.txt +++ b/Documentation/devicetree/bindings/pmem/pmem-region.txt @@ -19,7 +19,7 @@ Required properties: - compatible = "pmem-region" - reg = <base, size>; - The reg property should specificy an address range that is + The reg property should specify an address range that is translatable to a system physical address range. This address range should be mappable as normal system memory would be (i.e cacheable). @@ -30,7 +30,7 @@ Required properties: node implies no special relationship between the two ranges. Optional properties: - - Any relevant NUMA assocativity properties for the target platform. + - Any relevant NUMA associativity properties for the target platform. - volatile; This property indicates that this region is actually backed by non-persistent memory. This lets the OS know that it diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml index 559718997de7..fba6914ec40d 100644 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -58,7 +58,7 @@ $defs: pd-node: type: object description: - PM domain node representing a PM domain. This node hould be named by + PM domain node representing a PM domain. This node should be named by the real power area name, and thus its name should be unique. properties: diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml index 45d66c775115..b54ec003a1e0 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml# diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml index d3d18e0f5db3..53535de0d41c 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml index f2ffdd29d52a..965a834a3dbe 100644 --- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml +++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml index 4fe9c3705265..a76afe3ca299 100644 --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2020 Texas Instruments Incorporated %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index 99f506d6b0a0..f255f3858d08 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: SBS compliant manger +title: SBS compliant manager maintainers: - Sebastian Reichel <sre@kernel.org> diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt deleted file mode 100644 index 54b9f9d0f90f..000000000000 --- a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt +++ /dev/null @@ -1,34 +0,0 @@ ------------------------------------------------------------ -Device Tree Bindings for the Xilinx Zynq MPSoC PM domains ------------------------------------------------------------ -The binding for zynqmp-power-controller follow the common -generic PM domain binding[1]. - -[1] Documentation/devicetree/bindings/power/power-domain.yaml - -== Zynq MPSoC Generic PM Domain Node == - -Required property: - - Below property should be in zynqmp-firmware node. - - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. - -Power domain ID indexes are mentioned in -include/dt-bindings/power/xlnx-zynqmp-power.h. - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - ... - #power-domain-cells = <1>; - ... - }; -}; - -sata { - ... - power-domains = <&zynqmp_firmware 28>; - ... -}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index 801c66069121..4787db8de23f 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -28,6 +28,6 @@ PROPERTIES Snoop ID Port Mapping registers, which are part of the CoreNet Coherency fabric (CCF), provide a CoreNet Coherency Subdomain ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from - these registers should be set if the coresponding CPU should be + these registers should be set if the corresponding CPU should be snooped. This property defines a bitmask which selects the bit that should be set if this cpu should be snooped. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt index 4b01e1afafda..62744afb5b75 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt @@ -185,10 +185,10 @@ PROPERTIES with distinct functionality. The first register range describes the CoreNet Debug Controller - functionalty to perform transaction and transaction attribute matches. + functionality to perform transaction and transaction attribute matches. The second register range describes the CoreNet Debug Controller - functionalty to trigger event notifications and debug traces. + functionality to trigger event notifications and debug traces. EXAMPLE dcsr-corenet { diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt index 4ad29b9ac2ac..ea902bc5873d 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt @@ -60,7 +60,7 @@ Optional property: - fsl,liodn: Specifies the LIODN to be used for Job Ring. This property is normally set by firmware. Value is of 12-bits which is the LIODN number for this JR. - This property is used by the IOMMU (PAMU) to distinquish + This property is used by the IOMMU (PAMU) to distinguish transactions from this JR and than be able to do address translation & protection accordingly. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt index b558585b1aaf..3826bd1219d1 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt @@ -42,7 +42,7 @@ Nintendo GameCube device tree - compatible : should be "nintendo,flipper-pic" -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 3ff6ebbb4998..6f69a9dfe198 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -53,7 +53,7 @@ Nintendo Wii device tree - compatible : should be "nintendo,flipper-pic" - interrupt-controller -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt deleted file mode 100644 index 9012a2a02e14..000000000000 --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Device-Tree Bindings for a PPS Signal on GPIO - -These properties describe a PPS (pulse-per-second) signal connected to -a GPIO pin. - -Required properties: -- compatible: should be "pps-gpio" -- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt - -Additional required properties for the PPS ECHO functionality: -- echo-gpios: one PPS ECHO GPIO in the format described by ../gpio/gpio.txt -- echo-active-ms: duration in ms of the active portion of the echo pulse - -Optional properties: -- assert-falling-edge: when present, assert is indicated by a falling edge - (instead of by a rising edge) - -Example: - pps { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pps>; - - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - assert-falling-edge; - - echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - echo-active-ms = <100>; - - compatible = "pps-gpio"; - }; diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.yaml b/Documentation/devicetree/bindings/pps/pps-gpio.yaml new file mode 100644 index 000000000000..fd4adfa8d2d4 --- /dev/null +++ b/Documentation/devicetree/bindings/pps/pps-gpio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pps/pps-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PPS Signal via GPIO + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +properties: + compatible: + const: pps-gpio + + gpios: + description: The GPIO that provides the PPS signal. + maxItems: 1 + + echo-gpios: + description: The GPIO that provides the PPS ECHO signal. + maxItems: 1 + + echo-active-ms: + description: Duration in ms of the active portion of the echo pulse. + + assert-falling-edge: + description: Indicates a falling edge assert, when present. Rising edge if absent. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + assert-falling-edge; + echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + echo-active-ms = <100>; + }; diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml index 9aabdb373afa..4d0b5964443d 100644 --- a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml +++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml @@ -18,7 +18,7 @@ description: The IP block has a version register so this can be used for detection instead of having to encode the IP version number in the device tree - comaptible. + compatible. allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt index 1c4bfe786736..bcf788897e44 100644 --- a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -35,7 +35,7 @@ information for that regulator. The definition for each of these nodes is defined using the standard binding for regulators found at <Documentation/devicetree/bindings/regulator/regulator.txt>. -Theres are also additional properties for SD/LDOs. These additional properties +There are also additional properties for SD/LDOs. These additional properties are required to configure FPS configuration parameters for SDs and LDOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index e158c2d3d3f9..9daf0fc2465f 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -126,7 +126,7 @@ properties: regulator-oc-error-microamp: description: Set over current error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested. + the hardware probably is malfunctional and damage prevention is requested. Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. @@ -146,7 +146,7 @@ properties: regulator-ov-error-microvolt: description: Set over voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -168,7 +168,7 @@ properties: regulator-uv-error-microvolt: description: Set under voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -189,7 +189,7 @@ properties: regulator-temp-error-kelvin: description: Set over temperature error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml index edb411be0390..89341fdaa3af 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml @@ -11,7 +11,7 @@ maintainers: description: | The RT5190A integrates 1 channel buck controller, 3 channels high efficiency - synchronous buck converters, 1 LDO, I2C control interface and peripherial + synchronous buck converters, 1 LDO, I2C control interface and peripheral logical control. It also supports mute AC OFF depop sound and quick setting storage while diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt index 601328d7fdbb..e940377cfd69 100644 --- a/Documentation/devicetree/bindings/regulator/vctrl.txt +++ b/Documentation/devicetree/bindings/regulator/vctrl.txt @@ -21,7 +21,7 @@ Optional properties: margin from the expected value for a given control voltage. On larger voltage decreases this can occur undesiredly since the output voltage does not adjust - inmediately to changes in the control voltage. To + immediately to changes in the control voltage. To avoid this situation the vctrl driver breaks down larger voltage decreases into multiple steps, where each step is within the OVP threshold. diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index f16e90380df1..9768db8663eb 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index fcc3db97fe8f..a492f74a8608 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml# @@ -102,7 +102,7 @@ patternProperties: caches. Each of the TCMs can be enabled or disabled independently and either of them can be configured to appear at that R5F's address 0x0. - The cores do not use an MMU, but has a Region Address Translater + The cores do not use an MMU, but has a Region Address Translator (RAT) module that is accessible only from the R5Fs for providing translations between 32-bit CPU addresses into larger system bus addresses. Cache and memory access settings are provided through a diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 1fdc2741c36e..94eb2033e79c 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml index 35f0bb38f7b2..2811334515d1 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml index cd55d80137f7..baccd98754a9 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-rproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml index 9f677367dd9f..78aac69f1060 100644 --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml# diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml index 4379cec6b35a..761c70cf9ddf 100644 --- a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml +++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera SOCFPGA Reset Manager maintainers: - - Dinh Nguyen <dinguyen@altera.com> + - Dinh Nguyen <dinguyen@kernel.org> properties: compatible: @@ -32,9 +32,17 @@ properties: required: - compatible - reg - - altr,modrst-offset - '#reset-cells' +if: + properties: + compatible: + contains: + const: altr,stratix10-rst-mgr +then: + properties: + altr,modrst-offset: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml index dcf9206e12be..e10eb98eddad 100644 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml# diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml index f436f2cf1df7..6063784f0352 100644 --- a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml# diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index 86945502ccb5..61a0ff33e89f 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -43,7 +43,7 @@ Required properties: Cell #6 : bit position of the reset in the reset status register Cell #7 : Flags used to control reset behavior, - availible flags defined in the DT include + available flags defined in the DT include file <dt-bindings/reset/ti-syscon.h> SysCon Reset Consumer Nodes diff --git a/Documentation/devicetree/bindings/rng/omap_rng.yaml b/Documentation/devicetree/bindings/rng/omap_rng.yaml index ccf54fae8302..c0ac4f68ea54 100644 --- a/Documentation/devicetree/bindings/rng/omap_rng.yaml +++ b/Documentation/devicetree/bindings/rng/omap_rng.yaml @@ -30,8 +30,8 @@ properties: clocks: minItems: 1 items: - - description: EIP150 gatable clock - - description: Main gatable clock + - description: EIP150 gateable clock + - description: Main gateable clock clock-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt index b94b35f3600b..7d7b5f6bda65 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt @@ -10,7 +10,7 @@ Optional properties: - ctrl-reg : Contains the initial value of the control register also called "Register B". - freq-reg : Contains the initial value of the frequency register also - called "Regsiter A". + called "Register A". "Register A" and "B" are usually initialized by the firmware (BIOS for instance). If this is not done, it can be performed by the driver. diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt index 75d877f5968f..a1b9b6f3490a 100644 --- a/Documentation/devicetree/bindings/serial/st-asc.txt +++ b/Documentation/devicetree/bindings/serial/st-asc.txt @@ -8,7 +8,7 @@ Required properties: Optional properties: - st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommeded +- st,force-m1 bool flat to force asc to be in Mode-1 recommended for high bit rates (above 19.2K) Example: serial@fe440000{ diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml index 6876407124dc..51aaf34acb32 100644 --- a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml @@ -3,8 +3,8 @@ # # Copyright (c) 2021 Aspeed Technology Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Aspeed UART Routing Controller diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml index 8634865015cd..ceb81646fe75 100644 --- a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml +++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2022, Intel Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel HPS Copy Engine diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml index ecae9fa8561b..a64406ca17b5 100644 --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Antmicro <www.antmicro.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: LiteX SoC Controller driver diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index 8e6ba2ec8a43..f0fa92b04b32 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -12,7 +12,7 @@ maintainers: description: The MediaTek wo-ccif provides a configuration interface for WED WO - controller used to perfrom offload rx packet processing (e.g. 802.11 + controller used to perform offload rx packet processing (e.g. 802.11 aggregation packet reordering or rx header translation) on MT7986 soc. properties: diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index 04ffee3a7c59..365a9fed5914 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -12,7 +12,7 @@ maintainers: description: | PolarFire SoC devices include a microcontroller acting as the system controller, which provides "services" to the main processor and to the FPGA fabric. These - services include hardware rng, reprogramming of the FPGA and verfification of the + services include hardware rng, reprogramming of the FPGA and verification of the eNVM contents etc. More information on these services can be found online, at https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 9dc8e48c8af4..d1c7c2be865f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -77,7 +77,7 @@ patternProperties: description: The AOSS side channel also provides the controls for three cooling devices, these are expressed as subnodes of the QMP node. The name of the node is - used to identify the resource and must therefor be "cx", "mx" or "ebi". + used to identify the resource and must therefore be "cx", "mx" or "ebi". properties: "#cooling-cells": diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 6440dc801387..bceb479f74c5 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -38,15 +38,9 @@ properties: patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# - - properties: - reg: true - required: - reg - unevaluatedProperties: false - required: - compatible diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index 398663d21ab1..e52e176d8cb3 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/{G2L,V2L} System Controller (SYSC) diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml index a08959c6e072..158186610c53 100644 --- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 NavigatorSS Ring Accelerator diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml index 5df7688a1e1c..a750035d6234 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index 9d049d4bfd58..b6cc5f6f78c2 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -29,7 +29,7 @@ The schematics explaining the gpios are as follows: IN2 +---o--+------------+--o---+ OUT2 loop2 relays -The 'loop1' gpio pin controlls two relays, which are either in loop position, +The 'loop1' gpio pin controls two relays, which are either in loop position, meaning that input and output are directly connected, or they are in mixer position, meaning that the signal is passed through the 'Sum' mixer. Similarly for 'loop2'. diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt index 7915897f8a81..e84f30c5c39b 100644 --- a/Documentation/devicetree/bindings/sound/cs35l35.txt +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -110,7 +110,7 @@ Optional Monitor Signal Format sub-node: See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet - -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formating + -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formatting on the I2S Port. Each of the 3 8 bit values in the array contain the settings for depth, location, and frame. diff --git a/Documentation/devicetree/bindings/sound/cs35l36.txt b/Documentation/devicetree/bindings/sound/cs35l36.txt index 912bd162b477..d34117b8558e 100644 --- a/Documentation/devicetree/bindings/sound/cs35l36.txt +++ b/Documentation/devicetree/bindings/sound/cs35l36.txt @@ -33,7 +33,7 @@ Optional properties: one amplifier in the system. If more than one it is best to Hi-Z the ASP port to prevent bus contention on the output signal - - cirrus,boost-ctl-select : Boost conerter control source selection. + - cirrus,boost-ctl-select : Boost converter control source selection. Selects the source of the BST_CTL target VBST voltage for the boost converter to generate. 0x00 - Control Port Value diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt index 4dbfb8274cd9..dc256adb35a2 100644 --- a/Documentation/devicetree/bindings/sound/cs53l30.txt +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -30,7 +30,7 @@ Optional properties: * frame using two different ways: * 1) Normal I2S mode on two data pins -- each SDOUT * carries 2-channel data in the same time. - * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 2) TDM mode on one single data pin -- SDOUT1 carries * 4-channel data per frame. Example: diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml index bb5af48ab1e1..eb7d219e2c86 100644 --- a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml +++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml @@ -74,7 +74,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,mic-amp-in-sel: - enum: ["diff", "se_p", "se_n"] + enum: [diff, se_p, se_n] description: Mic input source type. @@ -123,7 +123,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,jack-ins-det-pty: - enum: ["low", "high"] + enum: [low, high] description: Polarity for jack insertion detection. $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 0a2480aeecf0..90112ca1ff42 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -44,7 +44,7 @@ Required properties: - fsl,esai-synchronous: This is a boolean property. If present, indicating that ESAI would work in the synchronous mode, which means all the settings for Receiving would be - duplicated from Transmition related registers. + duplicated from Transmission related registers. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index 0b92c71d8779..90520f89208b 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -141,7 +141,7 @@ patternProperties: maxItems: 16 description: This is a list of channel IDs which should be disabled. - By default, all data received from ETDM pins will be outputed to + By default, all data received from ETDM pins will be outputted to memory. etdm in supports disable_out in direct mode(w/o interconn), so user can disable the specified channels by the property. uniqueItems: true diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 560762e0a168..f548e6a58240 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -1,7 +1,7 @@ Mediatek AFE PCM controller for mt2701 Required properties: -- compatible: should be one of the followings. +- compatible: should be one of the following. - "mediatek,mt2701-audio" - "mediatek,mt7622-audio" - interrupts: should contain AFE and ASYS interrupts diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index d5adf07d46e0..5c8dba2b3a81 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -111,7 +111,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm in moudule. + which etdm clock source is required by this etdm in module. enum: - 0 # etdm1_in - 1 # etdm2_in @@ -122,7 +122,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm out moudule. + which etdm clock source is required by this etdm out module. enum: - 0 # etdm1_in - 1 # etdm2_in diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml index fc89dbd6bf24..c29d7942915c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml @@ -35,12 +35,12 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Earpiece" - - "Headset Mic" - - "Internal Mic 1" - - "Internal Mic 2" + - Int Spk + - Headphone Jack + - Earpiece + - Headset Mic + - Internal Mic 1 + - Internal Mic 2 # CODEC Pins - HPL diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml index a04487002e88..0c8067c3b056 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml @@ -31,10 +31,10 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Mic Jack" - - "Int Mic" + - Int Spk + - Headphone Jack + - Mic Jack + - Int Mic # CODEC Pins - MIC1 diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b731f16aea84..dfd768b1ad7d 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -94,7 +94,7 @@ see "Example: simple sound card for Asynchronous mode" [xx]ch [yy]ch ------> [CTU] --------> -CTU can convert [xx]ch to [yy]ch, or exchange outputed channel. +CTU can convert [xx]ch to [yy]ch, or exchange outputted channel. CTU conversion needs matrix settings. For more detail information, see below diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt index e5430d1d34e4..73577ac1b89c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -12,7 +12,7 @@ Required properties: source. For this driver the first string should always be "Analog". -Optionnal properties: +Optional properties: - rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the headphone (when the analog output is an headphone). - rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 2a55e9133408..24a6dab28f25 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -28,7 +28,7 @@ Optional properties: If the value is 0, it means the impedance sensing is not supported. - "realtek,impedance_sensing_table" The matrix rows of the impedance sensing table are consisted by impedance - minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + minimum, impedance maximum, volume, DC offset w/o and w/ mic of each L and R channel accordingly. Example is shown as following. < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml index 4afc29376efc..f6a807329a5a 100644 --- a/Documentation/devicetree/bindings/sound/serial-midi.yaml +++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml @@ -20,7 +20,7 @@ description: parent serial device. If the standard MIDI baud of 31.25 kBaud is needed (as would be the case if interfacing with arbitrary external MIDI devices), configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud - resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/sprd-pcm.txt b/Documentation/devicetree/bindings/sound/sprd-pcm.txt index 4b23e84b2e57..fbbcade2181d 100644 --- a/Documentation/devicetree/bindings/sound/sprd-pcm.txt +++ b/Documentation/devicetree/bindings/sound/sprd-pcm.txt @@ -1,4 +1,4 @@ -* Spreadtrum DMA platfrom bindings +* Spreadtrum DMA platform bindings Required properties: - compatible: Should be "sprd,pcm-platform". diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 56d206f97a96..59df8a832310 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -63,7 +63,7 @@ patternProperties: additionalProperties: false description: Two subnodes corresponding to SAI sub-block instances A et B - can be defined. Subnode can be omitted for unsused sub-block. + can be defined. Subnode can be omitted for unused sub-block. properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index 859d369c71e2..5b2874a80a4d 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -13,7 +13,7 @@ maintainers: description: | The Infotainment board plugs into the Common Processor Board, the support of the - extension board is extending the CPB audio support, decribed in: + extension board is extending the CPB audio support, described in: sound/ti,j721e-cpb-audio.txt The audio support on the Infotainment Expansion Board consists of McASP0 diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 8d60e4e236d6..a69e6c223308 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -29,7 +29,7 @@ properties: reg: description: I2C address, in multiple tas2781s case, all the i2c address - aggreate as one Audio Device to support multiple audio slots. + aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 items: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index c16e1760cf85..f3274bcc4c05 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -32,7 +32,7 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index fb44b89a754e..7d60a9654912 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -159,7 +159,7 @@ properties: qcom,ports-hstart: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying lowerst numbered coloum in SoundWire Frame, + Identifying lowerst numbered column in SoundWire Frame, i.e. left edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented @@ -176,7 +176,7 @@ properties: qcom,ports-hstop: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying highest numbered coloum in SoundWire Frame, + Identifying highest numbered column in SoundWire Frame, i.e. the right edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt index 9887b0724759..d7668f41b03b 100644 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt @@ -1,4 +1,4 @@ -Broadcom BCM2835 auxiliar SPI1/2 controller +Broadcom BCM2835 auxiliary SPI1/2 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the @@ -9,7 +9,7 @@ Required properties: - reg: Should contain register location and length for the spi block - interrupts: Should contain shared interrupt of the aux block - clocks: The clock feeding the SPI controller - needs to - point to the auxiliar clock driver of the bcm2835, + point to the auxiliary clock driver of the bcm2835, as this clock will enable the output gate for the specific clock. - cs-gpios: the cs-gpios (native cs is NOT supported) diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 28222aae3077..45975f40d943 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -12,7 +12,7 @@ maintainers: description: | The Broadcom SPI controller is a SPI master found on various SOCs, including - BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits + BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists of: MSPI : SPI master controller can read and write to a SPI slave device BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration @@ -20,7 +20,7 @@ description: | io with 3-byte and 4-byte addressing support. Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. - MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance + MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance of a MSPI master without the BSPI to use with non flash slave devices that use SPI protocol. diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml index 352affa4b7f8..ff4d361707bd 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.yaml +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -68,7 +68,7 @@ properties: dma-names: description: List of DMA request names. These strings correspond 1:1 with - the DMA sepecifiers listed in dmas. The string names is to be + the DMA specifiers listed in dmas. The string names is to be "rxN" and "txN" for RX and TX requests, respectively. Where N is the chip select number. minItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml index 92762efc2120..5ff72ce5c887 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Limits Management Hardware(LMh) maintainers: - - Thara Gopinath <thara.gopinath@linaro.org> + - Thara Gopinath <thara.gopinath@gmail.com> description: Limits Management Hardware(LMh) is a hardware infrastructure on some diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt index 147ef3e74452..b02ab0af10ce 100644 --- a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt +++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt @@ -1,7 +1,7 @@ Synopsys ARC Local Timer with Interrupt Capabilities - Found on all ARC CPUs (ARC700/ARCHS) - Can be optionally programmed to interrupt on Limit -- Two idential copies TIMER0 and TIMER1 exist in ARC cores and historically +- Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically TIMER0 used as clockevent provider (true for all ARC cores) TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 40bc475ee7e1..cd58179ae337 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -197,13 +197,13 @@ properties: - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 - # 10-bit 10 kOhm linear programable voltage divider + # 10-bit 10 kOhm linear programmable voltage divider - maxim,max5481 - # 10-bit 50 kOhm linear programable voltage divider + # 10-bit 50 kOhm linear programmable voltage divider - maxim,max5482 - # 10-bit 10 kOhm linear programable variable resistor + # 10-bit 10 kOhm linear programmable variable resistor - maxim,max5483 - # 10-bit 50 kOhm linear programable variable resistor + # 10-bit 50 kOhm linear programmable variable resistor - maxim,max5484 # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion - maxim,max6621 @@ -295,8 +295,6 @@ properties: - miramems,da311 # Temperature sensor with integrated fan control - national,lm63 - # I2C TEMP SENSOR - - national,lm75 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm80 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index bdfa86a0cc98..462ead5a1cec 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -29,6 +29,7 @@ properties: - qcom,sa8775p-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -79,6 +80,11 @@ properties: minItems: 1 maxItems: 2 + reg-names: + items: + - const: std + - const: ice + required-opps: maxItems: 1 @@ -134,6 +140,8 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 - if: properties: @@ -162,6 +170,10 @@ allOf: reg: minItems: 2 maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names - if: properties: @@ -190,6 +202,37 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: ice_core_clk + reg: + minItems: 2 + maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names # TODO: define clock bindings for qcom,msm8994-ufshc @@ -274,5 +317,6 @@ examples: <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; }; }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml index 47a4e9e1a775..bbaee4f5f7b2 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -74,7 +74,7 @@ properties: Specifies max. load that can be drawn from VCCQ2 supply. dependencies: - freq-table-hz: [ 'clocks' ] + freq-table-hz: [ clocks ] required: - interrupts diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index 782402800d4a..91f135c3495b 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -167,7 +167,7 @@ properties: at RTL is 0, so this property only affects siTD. If this property is not set, the max packet size is 1023 bytes, and - if the total of packet size for pervious transactions are more than + if the total of packet size for previous transactions are more than 256 bytes, it can't accept any transactions within this frame. The use case is single transaction, but higher frame rate. diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml index 75eec4a9a020..89fc9a434d05 100644 --- a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml @@ -43,10 +43,8 @@ properties: patternProperties: '^connector@[01]$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index 3fb4feb6d3d9..9ea1e4cd0709 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -52,7 +52,7 @@ properties: fsl,permanently-attached: type: boolean description: - Indicates if the device atached to a downstream port is + Indicates if the device attached to a downstream port is permanently attached. fsl,disable-port-power-control: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index b956bb5fada7..f37191f21501 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-a83t-ehci - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci + - allwinner,sun8i-v3s-ehci - allwinner,sun9i-a80-ehci - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index be268e23ca79..b9576015736b 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -25,6 +25,7 @@ properties: - allwinner,sun8i-a83t-ohci - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci + - allwinner,sun8i-v3s-ohci - allwinner,sun9i-a80-ohci - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index cc4cf92b70d1..6378356727e1 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 8654a3ec23e4..afc30e98b123 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -53,7 +53,7 @@ Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual - SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + SPDT USB Switch, witch is controlled by GPIO to de/multiplex D+/D- USB lines between connectors. - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index 9309f003cd07..f0784d2e86da 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml index 4ced2f68e2a9..07bec1fe6ebf 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml +++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml @@ -10,7 +10,7 @@ maintainers: - ChiYuan Huang <cy_huang@richtek.com> description: | - The RT1719 is a sink-only USB Type-C contoller that complies with the latest + The RT1719 is a sink-only USB Type-C controller that complies with the latest USB Type-C and PD standards. It does the USB Type-C detection including attach and orientation. It integrates the physical layer of the USB BMC power delivery protocol to allow up to 100W of power. The BMC PD block enables full diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt deleted file mode 100644 index 0388634598ce..000000000000 --- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung High Speed USB OTG controller ------------------------------ - -The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. -It gives functionality of OTG-compliant USB 2.0 host and device with -support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) -operation. - -Currently only device mode is supported. - -Binding details ------ - -Required properties: -- compatible: "samsung,s3c6400-hsotg" should be used for all currently - supported SoC, -- interrupts: specifier of interrupt signal of interrupt controller, - according to bindings of interrupt controller, -- clocks: contains an array of clock specifiers: - - first entry: OTG clock -- clock-names: contains array of clock names: - - first entry: must be "otg" -- vusb_d-supply: phandle to voltage regulator of digital section, -- vusb_a-supply: phandle to voltage regulator of analog section. - -Example ------ - - hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; - clocks = <&clock 305>; - clock-names = "otg"; - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - }; - diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index 88ea6c952c66..c2e29bd61e11 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml index 23a13e1d5c7a..76db9071b352 100644 --- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml +++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/vialab,vl817.yaml# diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a64876a5c3ea..573578db9509 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1157,6 +1157,8 @@ patternProperties: description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": description: RoseapplePi.org + "^saef,.*": + description: Saef Technology Limited "^samsung,.*": description: Samsung Semiconductor "^samtec,.*": diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml index 51d03d5b08ad..3e9fd49d935e 100644 --- a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Toshiba Electronic Devices & Storage Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba Visconti SoCs PIUWDT Watchdog timer diff --git a/MAINTAINERS b/MAINTAINERS index cc2d478c4773..8b28203b6957 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17123,7 +17123,7 @@ L: linuxpps@ml.enneenne.com (subscribers-only) S: Maintained W: http://wiki.enneenne.com/index.php/LinuxPPS_support F: Documentation/ABI/testing/sysfs-pps -F: Documentation/devicetree/bindings/pps/pps-gpio.txt +F: Documentation/devicetree/bindings/pps/pps-gpio.yaml F: Documentation/driver-api/pps.rst F: drivers/pps/ F: include/linux/pps*.h diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 77510e4f47de..76bfcba25003 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -1528,6 +1528,6 @@ int __init platform_bus_init(void) error = bus_register(&platform_bus_type); if (error) device_unregister(&platform_bus); - of_platform_register_reconfig_notifier(); + return error; } diff --git a/drivers/of/base.c b/drivers/of/base.c index 166fb7d75337..8d93cb6ea9cd 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -167,6 +167,7 @@ void __init of_core_init(void) { struct device_node *np; + of_platform_register_reconfig_notifier(); /* Create the kset, and register existing nodes */ mutex_lock(&of_mutex); @@ -1529,6 +1530,20 @@ int of_count_phandle_with_args(const struct device_node *np, const char *list_na } EXPORT_SYMBOL(of_count_phandle_with_args); +static struct property *__of_remove_property_from_list(struct property **list, struct property *prop) +{ + struct property **next; + + for (next = list; *next; next = &(*next)->next) { + if (*next == prop) { + *next = prop->next; + prop->next = NULL; + return prop; + } + } + return NULL; +} + /** * __of_add_property - Add a property to a node without lock operations * @np: Caller's Device Node @@ -1536,19 +1551,32 @@ EXPORT_SYMBOL(of_count_phandle_with_args); */ int __of_add_property(struct device_node *np, struct property *prop) { + int rc = 0; + unsigned long flags; struct property **next; + raw_spin_lock_irqsave(&devtree_lock, flags); + + __of_remove_property_from_list(&np->deadprops, prop); + prop->next = NULL; next = &np->properties; while (*next) { - if (strcmp(prop->name, (*next)->name) == 0) + if (strcmp(prop->name, (*next)->name) == 0) { /* duplicate ! don't insert it */ - return -EEXIST; - + rc = -EEXIST; + goto out_unlock; + } next = &(*next)->next; } *next = prop; +out_unlock: + raw_spin_unlock_irqrestore(&devtree_lock, flags); + if (rc) + return rc; + + __of_add_property_sysfs(np, prop); return 0; } @@ -1559,18 +1587,10 @@ int __of_add_property(struct device_node *np, struct property *prop) */ int of_add_property(struct device_node *np, struct property *prop) { - unsigned long flags; int rc; mutex_lock(&of_mutex); - - raw_spin_lock_irqsave(&devtree_lock, flags); rc = __of_add_property(np, prop); - raw_spin_unlock_irqrestore(&devtree_lock, flags); - - if (!rc) - __of_add_property_sysfs(np, prop); - mutex_unlock(&of_mutex); if (!rc) @@ -1582,20 +1602,23 @@ EXPORT_SYMBOL_GPL(of_add_property); int __of_remove_property(struct device_node *np, struct property *prop) { - struct property **next; + unsigned long flags; + int rc = -ENODEV; - for (next = &np->properties; *next; next = &(*next)->next) { - if (*next == prop) - break; + raw_spin_lock_irqsave(&devtree_lock, flags); + + if (__of_remove_property_from_list(&np->properties, prop)) { + /* Found the property, add it to deadprops list */ + prop->next = np->deadprops; + np->deadprops = prop; + rc = 0; } - if (*next == NULL) - return -ENODEV; - /* found the node */ - *next = prop->next; - prop->next = np->deadprops; - np->deadprops = prop; + raw_spin_unlock_irqrestore(&devtree_lock, flags); + if (rc) + return rc; + __of_remove_property_sysfs(np, prop); return 0; } @@ -1611,21 +1634,13 @@ int __of_remove_property(struct device_node *np, struct property *prop) */ int of_remove_property(struct device_node *np, struct property *prop) { - unsigned long flags; int rc; if (!prop) return -ENODEV; mutex_lock(&of_mutex); - - raw_spin_lock_irqsave(&devtree_lock, flags); rc = __of_remove_property(np, prop); - raw_spin_unlock_irqrestore(&devtree_lock, flags); - - if (!rc) - __of_remove_property_sysfs(np, prop); - mutex_unlock(&of_mutex); if (!rc) @@ -1639,6 +1654,11 @@ int __of_update_property(struct device_node *np, struct property *newprop, struct property **oldpropp) { struct property **next, *oldprop; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + + __of_remove_property_from_list(&np->deadprops, newprop); for (next = &np->properties; *next; next = &(*next)->next) { if (of_prop_cmp((*next)->name, newprop->name) == 0) @@ -1658,6 +1678,10 @@ int __of_update_property(struct device_node *np, struct property *newprop, *next = newprop; } + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_update_property_sysfs(np, newprop, oldprop); + return 0; } @@ -1673,21 +1697,13 @@ int __of_update_property(struct device_node *np, struct property *newprop, int of_update_property(struct device_node *np, struct property *newprop) { struct property *oldprop; - unsigned long flags; int rc; if (!newprop->name) return -EINVAL; mutex_lock(&of_mutex); - - raw_spin_lock_irqsave(&devtree_lock, flags); rc = __of_update_property(np, newprop, &oldprop); - raw_spin_unlock_irqrestore(&devtree_lock, flags); - - if (!rc) - __of_update_property_sysfs(np, newprop, oldprop); - mutex_unlock(&of_mutex); if (!rc) diff --git a/drivers/of/device.c b/drivers/of/device.c index 90131de6d75b..1ca42ad9dd15 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -32,25 +32,6 @@ const struct of_device_id *of_match_device(const struct of_device_id *matches, } EXPORT_SYMBOL(of_match_device); -int of_device_add(struct platform_device *ofdev) -{ - BUG_ON(ofdev->dev.of_node == NULL); - - /* name and id have to be set so that the platform bus doesn't get - * confused on matching */ - ofdev->name = dev_name(&ofdev->dev); - ofdev->id = PLATFORM_DEVID_NONE; - - /* - * If this device has not binding numa node in devicetree, that is - * of_node_to_nid returns NUMA_NO_NODE. device_add will assume that this - * device is on the same node as the parent. - */ - set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->dev.of_node)); - - return device_add(&ofdev->dev); -} - static void of_dma_set_restricted_buffer(struct device *dev, struct device_node *np) { @@ -221,19 +202,6 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, } EXPORT_SYMBOL_GPL(of_dma_configure_id); -int of_device_register(struct platform_device *pdev) -{ - device_initialize(&pdev->dev); - return of_device_add(pdev); -} -EXPORT_SYMBOL(of_device_register); - -void of_device_unregister(struct platform_device *ofdev) -{ - device_unregister(&ofdev->dev); -} -EXPORT_SYMBOL(of_device_unregister); - const void *of_device_get_match_data(const struct device *dev) { const struct of_device_id *match; diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 4999636eaa92..0a3483e247a8 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -72,27 +72,21 @@ static const char *action_names[] = { [OF_RECONFIG_UPDATE_PROPERTY] = "UPDATE_PROPERTY", }; +#define _do_print(func, prefix, action, node, prop, ...) ({ \ + func("changeset: " prefix "%-15s %pOF%s%s\n", \ + ##__VA_ARGS__, action_names[action], node, \ + prop ? ":" : "", prop ? prop->name : ""); \ +}) +#define of_changeset_action_err(...) _do_print(pr_err, __VA_ARGS__) +#define of_changeset_action_debug(...) _do_print(pr_debug, __VA_ARGS__) + int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p) { int rc; -#ifdef DEBUG struct of_reconfig_data *pr = p; - switch (action) { - case OF_RECONFIG_ATTACH_NODE: - case OF_RECONFIG_DETACH_NODE: - pr_debug("notify %-15s %pOF\n", action_names[action], - pr->dn); - break; - case OF_RECONFIG_ADD_PROPERTY: - case OF_RECONFIG_REMOVE_PROPERTY: - case OF_RECONFIG_UPDATE_PROPERTY: - pr_debug("notify %-15s %pOF:%s\n", action_names[action], - pr->dn, pr->prop->name); - break; + of_changeset_action_debug("notify: ", action, pr->dn, pr->prop); - } -#endif rc = blocking_notifier_call_chain(&of_reconfig_chain, action, p); return notifier_to_errno(rc); } @@ -204,6 +198,9 @@ static void __of_attach_node(struct device_node *np) { const __be32 *phandle; int sz; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); if (!of_node_check_flag(np, OF_OVERLAY)) { np->name = __of_get_property(np, "name", NULL); @@ -226,6 +223,10 @@ static void __of_attach_node(struct device_node *np) np->parent->child = np; of_node_clear_flag(np, OF_DETACHED); np->fwnode.flags |= FWNODE_FLAG_NOT_DEVICE; + + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_attach_node_sysfs(np); } /** @@ -235,17 +236,12 @@ static void __of_attach_node(struct device_node *np) int of_attach_node(struct device_node *np) { struct of_reconfig_data rd; - unsigned long flags; memset(&rd, 0, sizeof(rd)); rd.dn = np; mutex_lock(&of_mutex); - raw_spin_lock_irqsave(&devtree_lock, flags); __of_attach_node(np); - raw_spin_unlock_irqrestore(&devtree_lock, flags); - - __of_attach_node_sysfs(np); mutex_unlock(&of_mutex); of_reconfig_notify(OF_RECONFIG_ATTACH_NODE, &rd); @@ -256,13 +252,15 @@ int of_attach_node(struct device_node *np) void __of_detach_node(struct device_node *np) { struct device_node *parent; + unsigned long flags; - if (WARN_ON(of_node_check_flag(np, OF_DETACHED))) - return; + raw_spin_lock_irqsave(&devtree_lock, flags); parent = np->parent; - if (WARN_ON(!parent)) + if (WARN_ON(of_node_check_flag(np, OF_DETACHED) || !parent)) { + raw_spin_unlock_irqrestore(&devtree_lock, flags); return; + } if (parent->child == np) parent->child = np->sibling; @@ -279,6 +277,10 @@ void __of_detach_node(struct device_node *np) /* race with of_find_node_by_phandle() prevented by devtree_lock */ __of_phandle_cache_inv_entry(np->phandle); + + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_detach_node_sysfs(np); } /** @@ -288,17 +290,12 @@ void __of_detach_node(struct device_node *np) int of_detach_node(struct device_node *np) { struct of_reconfig_data rd; - unsigned long flags; memset(&rd, 0, sizeof(rd)); rd.dn = np; mutex_lock(&of_mutex); - raw_spin_lock_irqsave(&devtree_lock, flags); __of_detach_node(np); - raw_spin_unlock_irqrestore(&devtree_lock, flags); - - __of_detach_node_sysfs(np); mutex_unlock(&of_mutex); of_reconfig_notify(OF_RECONFIG_DETACH_NODE, &rd); @@ -486,6 +483,38 @@ struct device_node *__of_node_dup(const struct device_node *np, return NULL; } +/** + * of_changeset_create_node - Dynamically create a device node and attach to + * a given changeset. + * + * @ocs: Pointer to changeset + * @parent: Pointer to parent device node + * @full_name: Node full name + * + * Return: Pointer to the created device node or NULL in case of an error. + */ +struct device_node *of_changeset_create_node(struct of_changeset *ocs, + struct device_node *parent, + const char *full_name) +{ + struct device_node *np; + int ret; + + np = __of_node_dup(NULL, full_name); + if (!np) + return NULL; + np->parent = parent; + + ret = of_changeset_attach_node(ocs, np); + if (ret) { + of_node_put(np); + return NULL; + } + + return np; +} +EXPORT_SYMBOL(of_changeset_create_node); + static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) { if (ce->action == OF_RECONFIG_ATTACH_NODE && @@ -503,30 +532,6 @@ static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) kfree(ce); } -#ifdef DEBUG -static void __of_changeset_entry_dump(struct of_changeset_entry *ce) -{ - switch (ce->action) { - case OF_RECONFIG_ADD_PROPERTY: - case OF_RECONFIG_REMOVE_PROPERTY: - case OF_RECONFIG_UPDATE_PROPERTY: - pr_debug("cset<%p> %-15s %pOF/%s\n", ce, action_names[ce->action], - ce->np, ce->prop->name); - break; - case OF_RECONFIG_ATTACH_NODE: - case OF_RECONFIG_DETACH_NODE: - pr_debug("cset<%p> %-15s %pOF\n", ce, action_names[ce->action], - ce->np); - break; - } -} -#else -static inline void __of_changeset_entry_dump(struct of_changeset_entry *ce) -{ - /* empty */ -} -#endif - static void __of_changeset_entry_invert(struct of_changeset_entry *ce, struct of_changeset_entry *rce) { @@ -594,13 +599,10 @@ static int __of_changeset_entry_notify(struct of_changeset_entry *ce, static int __of_changeset_entry_apply(struct of_changeset_entry *ce) { - struct property *old_prop, **propp; - unsigned long flags; int ret = 0; - __of_changeset_entry_dump(ce); + of_changeset_action_debug("apply: ", ce->action, ce->np, ce->prop); - raw_spin_lock_irqsave(&devtree_lock, flags); switch (ce->action) { case OF_RECONFIG_ATTACH_NODE: __of_attach_node(ce->np); @@ -609,15 +611,6 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) __of_detach_node(ce->np); break; case OF_RECONFIG_ADD_PROPERTY: - /* If the property is in deadprops then it must be removed */ - for (propp = &ce->np->deadprops; *propp; propp = &(*propp)->next) { - if (*propp == ce->prop) { - *propp = ce->prop->next; - ce->prop->next = NULL; - break; - } - } - ret = __of_add_property(ce->np, ce->prop); break; case OF_RECONFIG_REMOVE_PROPERTY: @@ -625,47 +618,17 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) break; case OF_RECONFIG_UPDATE_PROPERTY: - /* If the property is in deadprops then it must be removed */ - for (propp = &ce->np->deadprops; *propp; propp = &(*propp)->next) { - if (*propp == ce->prop) { - *propp = ce->prop->next; - ce->prop->next = NULL; - break; - } - } - - ret = __of_update_property(ce->np, ce->prop, &old_prop); + ret = __of_update_property(ce->np, ce->prop, &ce->old_prop); break; default: ret = -EINVAL; } - raw_spin_unlock_irqrestore(&devtree_lock, flags); if (ret) { - pr_err("changeset: apply failed: %-15s %pOF:%s\n", - action_names[ce->action], ce->np, ce->prop->name); + of_changeset_action_err("apply failed: ", ce->action, ce->np, ce->prop); return ret; } - switch (ce->action) { - case OF_RECONFIG_ATTACH_NODE: - __of_attach_node_sysfs(ce->np); - break; - case OF_RECONFIG_DETACH_NODE: - __of_detach_node_sysfs(ce->np); - break; - case OF_RECONFIG_ADD_PROPERTY: - /* ignore duplicate names */ - __of_add_property_sysfs(ce->np, ce->prop); - break; - case OF_RECONFIG_REMOVE_PROPERTY: - __of_remove_property_sysfs(ce->np, ce->prop); - break; - case OF_RECONFIG_UPDATE_PROPERTY: - __of_update_property_sysfs(ce->np, ce->prop, ce->old_prop); - break; - } - return 0; } @@ -939,11 +902,140 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action, ce->np = of_node_get(np); ce->prop = prop; - if (action == OF_RECONFIG_UPDATE_PROPERTY && prop) - ce->old_prop = of_find_property(np, prop->name, NULL); - /* add it to the list */ list_add_tail(&ce->node, &ocs->entries); return 0; } EXPORT_SYMBOL_GPL(of_changeset_action); + +static int of_changeset_add_prop_helper(struct of_changeset *ocs, + struct device_node *np, + const struct property *pp) +{ + struct property *new_pp; + int ret; + + new_pp = __of_prop_dup(pp, GFP_KERNEL); + if (!new_pp) + return -ENOMEM; + + ret = of_changeset_add_property(ocs, np, new_pp); + if (ret) { + kfree(new_pp->name); + kfree(new_pp->value); + kfree(new_pp); + } + + return ret; +} + +/** + * of_changeset_add_prop_string - Add a string property to a changeset + * + * @ocs: changeset pointer + * @np: device node pointer + * @prop_name: name of the property to be added + * @str: pointer to null terminated string + * + * Create a string property and add it to a changeset. + * + * Return: 0 on success, a negative error value in case of an error. + */ +int of_changeset_add_prop_string(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, const char *str) +{ + struct property prop; + + prop.name = (char *)prop_name; + prop.length = strlen(str) + 1; + prop.value = (void *)str; + + return of_changeset_add_prop_helper(ocs, np, &prop); +} +EXPORT_SYMBOL_GPL(of_changeset_add_prop_string); + +/** + * of_changeset_add_prop_string_array - Add a string list property to + * a changeset + * + * @ocs: changeset pointer + * @np: device node pointer + * @prop_name: name of the property to be added + * @str_array: pointer to an array of null terminated strings + * @sz: number of string array elements + * + * Create a string list property and add it to a changeset. + * + * Return: 0 on success, a negative error value in case of an error. + */ +int of_changeset_add_prop_string_array(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, + const char **str_array, size_t sz) +{ + struct property prop; + int i, ret; + char *vp; + + prop.name = (char *)prop_name; + + prop.length = 0; + for (i = 0; i < sz; i++) + prop.length += strlen(str_array[i]) + 1; + + prop.value = kmalloc(prop.length, GFP_KERNEL); + if (!prop.value) + return -ENOMEM; + + vp = prop.value; + for (i = 0; i < sz; i++) { + vp += snprintf(vp, (char *)prop.value + prop.length - vp, "%s", + str_array[i]) + 1; + } + ret = of_changeset_add_prop_helper(ocs, np, &prop); + kfree(prop.value); + + return ret; +} +EXPORT_SYMBOL_GPL(of_changeset_add_prop_string_array); + +/** + * of_changeset_add_prop_u32_array - Add a property of 32 bit integers + * property to a changeset + * + * @ocs: changeset pointer + * @np: device node pointer + * @prop_name: name of the property to be added + * @array: pointer to an array of 32 bit integers + * @sz: number of array elements + * + * Create a property of 32 bit integers and add it to a changeset. + * + * Return: 0 on success, a negative error value in case of an error. + */ +int of_changeset_add_prop_u32_array(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, + const u32 *array, size_t sz) +{ + struct property prop; + __be32 *val; + int i, ret; + + val = kcalloc(sz, sizeof(__be32), GFP_KERNEL); + if (!val) + return -ENOMEM; + + for (i = 0; i < sz; i++) + val[i] = cpu_to_be32(array[i]); + prop.name = (char *)prop_name; + prop.length = sizeof(u32) * sz; + prop.value = (void *)val; + + ret = of_changeset_add_prop_helper(ocs, np, &prop); + kfree(val); + + return ret; +} +EXPORT_SYMBOL_GPL(of_changeset_add_prop_u32_array); diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index b57f1014e419..f38397c7b582 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -60,6 +60,12 @@ static inline int of_property_notify(int action, struct device_node *np, } #endif /* CONFIG_OF_DYNAMIC */ +#if defined(CONFIG_OF_DYNAMIC) && defined(CONFIG_OF_ADDRESS) +void of_platform_register_reconfig_notifier(void); +#else +static inline void of_platform_register_reconfig_notifier(void) { } +#endif + #if defined(CONFIG_OF_KOBJ) int of_node_is_attached(const struct device_node *node); int __of_add_property_sysfs(struct device_node *np, struct property *pp); diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 7feb643f1370..dfb6fb962fc7 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -682,9 +682,11 @@ static int build_changeset(struct overlay_changeset *ovcs) * 1) "target" property containing the phandle of the target * 2) "target-path" property containing the path of the target */ -static struct device_node *find_target(struct device_node *info_node) +static struct device_node *find_target(struct device_node *info_node, + struct device_node *target_base) { struct device_node *node; + char *target_path; const char *path; u32 val; int ret; @@ -700,10 +702,23 @@ static struct device_node *find_target(struct device_node *info_node) ret = of_property_read_string(info_node, "target-path", &path); if (!ret) { - node = of_find_node_by_path(path); - if (!node) - pr_err("find target, node: %pOF, path '%s' not found\n", - info_node, path); + if (target_base) { + target_path = kasprintf(GFP_KERNEL, "%pOF%s", target_base, path); + if (!target_path) + return NULL; + node = of_find_node_by_path(target_path); + if (!node) { + pr_err("find target, node: %pOF, path '%s' not found\n", + info_node, target_path); + } + kfree(target_path); + } else { + node = of_find_node_by_path(path); + if (!node) { + pr_err("find target, node: %pOF, path '%s' not found\n", + info_node, path); + } + } return node; } @@ -715,6 +730,7 @@ static struct device_node *find_target(struct device_node *info_node) /** * init_overlay_changeset() - initialize overlay changeset from overlay tree * @ovcs: Overlay changeset to build + * @target_base: Point to the target node to apply overlay * * Initialize @ovcs. Populate @ovcs->fragments with node information from * the top level of @overlay_root. The relevant top level nodes are the @@ -725,7 +741,8 @@ static struct device_node *find_target(struct device_node *info_node) * detected in @overlay_root. On error return, the caller of * init_overlay_changeset() must call free_overlay_changeset(). */ -static int init_overlay_changeset(struct overlay_changeset *ovcs) +static int init_overlay_changeset(struct overlay_changeset *ovcs, + struct device_node *target_base) { struct device_node *node, *overlay_node; struct fragment *fragment; @@ -752,8 +769,6 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs) if (!of_node_is_root(ovcs->overlay_root)) pr_debug("%s() ovcs->overlay_root is not root\n", __func__); - of_changeset_init(&ovcs->cset); - cnt = 0; /* fragment nodes */ @@ -786,7 +801,7 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs) fragment = &fragments[cnt]; fragment->overlay = overlay_node; - fragment->target = find_target(node); + fragment->target = find_target(node, target_base); if (!fragment->target) { of_node_put(fragment->overlay); ret = -EINVAL; @@ -877,6 +892,7 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs) * * of_overlay_apply() - Create and apply an overlay changeset * @ovcs: overlay changeset + * @base: point to the target node to apply overlay * * Creates and applies an overlay changeset. * @@ -900,7 +916,8 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs) * the caller of of_overlay_apply() must call free_overlay_changeset(). */ -static int of_overlay_apply(struct overlay_changeset *ovcs) +static int of_overlay_apply(struct overlay_changeset *ovcs, + struct device_node *base) { int ret = 0, ret_revert, ret_tmp; @@ -908,7 +925,7 @@ static int of_overlay_apply(struct overlay_changeset *ovcs) if (ret) goto out; - ret = init_overlay_changeset(ovcs); + ret = init_overlay_changeset(ovcs, base); if (ret) goto out; @@ -952,6 +969,7 @@ out: * @overlay_fdt: pointer to overlay FDT * @overlay_fdt_size: number of bytes in @overlay_fdt * @ret_ovcs_id: pointer for returning created changeset id + * @base: pointer for the target node to apply overlay * * Creates and applies an overlay changeset. * @@ -967,7 +985,7 @@ out: */ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, - int *ret_ovcs_id) + int *ret_ovcs_id, struct device_node *base) { void *new_fdt; void *new_fdt_align; @@ -1013,6 +1031,7 @@ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, INIT_LIST_HEAD(&ovcs->ovcs_list); list_add_tail(&ovcs->ovcs_list, &ovcs_list); + of_changeset_init(&ovcs->cset); /* * Must create permanent copy of FDT because of_fdt_unflatten_tree() @@ -1037,7 +1056,7 @@ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, } ovcs->overlay_mem = overlay_mem; - ret = of_overlay_apply(ovcs); + ret = of_overlay_apply(ovcs, base); /* * If of_overlay_apply() error, calling free_overlay_changeset() may * result in a memory leak if the apply partly succeeded, so do NOT diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 6a557eb866d0..f235ab55b91e 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -21,6 +21,8 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> +#include "of_private.h" + const struct of_device_id of_default_bus_match_table[] = { { .compatible = "simple-bus", }, { .compatible = "simple-mfd", }, @@ -31,11 +33,6 @@ const struct of_device_id of_default_bus_match_table[] = { {} /* Empty terminated list */ }; -static const struct of_device_id of_skipped_node_table[] = { - { .compatible = "operating-points-v2", }, - {} /* Empty terminated list */ -}; - /** * of_find_device_by_node - Find the platform_device associated with a node * @np: Pointer to device tree node @@ -54,7 +51,44 @@ struct platform_device *of_find_device_by_node(struct device_node *np) } EXPORT_SYMBOL(of_find_device_by_node); +int of_device_add(struct platform_device *ofdev) +{ + BUG_ON(ofdev->dev.of_node == NULL); + + /* name and id have to be set so that the platform bus doesn't get + * confused on matching */ + ofdev->name = dev_name(&ofdev->dev); + ofdev->id = PLATFORM_DEVID_NONE; + + /* + * If this device has not binding numa node in devicetree, that is + * of_node_to_nid returns NUMA_NO_NODE. device_add will assume that this + * device is on the same node as the parent. + */ + set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->dev.of_node)); + + return device_add(&ofdev->dev); +} + +int of_device_register(struct platform_device *pdev) +{ + device_initialize(&pdev->dev); + return of_device_add(pdev); +} +EXPORT_SYMBOL(of_device_register); + +void of_device_unregister(struct platform_device *ofdev) +{ + device_unregister(&ofdev->dev); +} +EXPORT_SYMBOL(of_device_unregister); + #ifdef CONFIG_OF_ADDRESS +static const struct of_device_id of_skipped_node_table[] = { + { .compatible = "operating-points-v2", }, + {} /* Empty terminated list */ +}; + /* * The following routines scan a subtree and registers a device for * each applicable node. diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile index ea5f4da68e23..01a966e39f23 100644 --- a/drivers/of/unittest-data/Makefile +++ b/drivers/of/unittest-data/Makefile @@ -32,7 +32,9 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtbo.o \ overlay_gpio_02b.dtbo.o \ overlay_gpio_03.dtbo.o \ overlay_gpio_04a.dtbo.o \ - overlay_gpio_04b.dtbo.o + overlay_gpio_04b.dtbo.o \ + overlay_pci_node.dtbo.o \ + overlay_bad_unresolved.dtbo.o # enable creation of __symbols__ node DTC_FLAGS_overlay += -@ diff --git a/drivers/of/unittest-data/overlay.dtso b/drivers/of/unittest-data/overlay.dtso index 3bbc59e922fe..b3e807b99852 100644 --- a/drivers/of/unittest-data/overlay.dtso +++ b/drivers/of/unittest-data/overlay.dtso @@ -3,13 +3,12 @@ /plugin/; &electric_1 { - status = "okay"; hvac_2: hvac-large-1 { compatible = "ot,hvac-large"; - heat-range = < 40 75 >; - cool-range = < 65 80 >; + heat-range = <40 75>; + cool-range = <65 80>; }; }; @@ -24,11 +23,11 @@ #size-cells = <1>; track@30 { - incline-up = < 48 32 16 >; + incline-up = <48 32 16>; }; track@40 { - incline-up = < 47 31 15 >; + incline-up = <47 31 15>; }; }; @@ -36,29 +35,28 @@ #address-cells = <1>; #size-cells = <1>; compatible = "ot,ferris-wheel"; - reg = < 0x00000200 0x100 >; - hvac-provider = < &hvac_2 >; - hvac-thermostat = < 27 32 > ; - hvac-zones = < 12 5 >; + reg = <0x00000200 0x100>; + hvac-provider = <&hvac_2>; + hvac-thermostat = <27 32> ; + hvac-zones = <12 5>; hvac-zone-names = "operator", "snack-bar"; - spin-controller = < &spin_ctrl_1 3 >; - spin-rph = < 30 >; - gondolas = < 16 >; - gondola-capacity = < 6 >; + spin-controller = <&spin_ctrl_1 3>; + spin-rph = <30>; + gondolas = <16>; + gondola-capacity = <6>; ride_200_left: track@10 { - reg = < 0x00000010 0x10 >; + reg = <0x00000010 0x10>; }; ride_200_right: track@20 { - reg = < 0x00000020 0x10 >; + reg = <0x00000020 0x10>; }; }; }; &lights_2 { - status = "okay"; color = "purple", "white", "red", "green"; - rate = < 3 256 >; + rate = <3 256>; }; diff --git a/drivers/of/unittest-data/overlay_0.dtso b/drivers/of/unittest-data/overlay_0.dtso index ac0f9e0fe65f..bb46582e0485 100644 --- a/drivers/of/unittest-data/overlay_0.dtso +++ b/drivers/of/unittest-data/overlay_0.dtso @@ -2,13 +2,8 @@ /dts-v1/; /plugin/; -/ { - /* overlay_0 - enable using absolute target path */ +/* overlay_0 - enable using absolute target path */ - fragment@0 { - target-path = "/testcase-data/overlay-node/test-bus/test-unittest0"; - __overlay__ { - status = "okay"; - }; - }; +&{/testcase-data/overlay-node/test-bus/test-unittest0} { + status = "okay"; }; diff --git a/drivers/of/unittest-data/overlay_1.dtso b/drivers/of/unittest-data/overlay_1.dtso index e92a626e2948..9c0fc8ffa4a1 100644 --- a/drivers/of/unittest-data/overlay_1.dtso +++ b/drivers/of/unittest-data/overlay_1.dtso @@ -2,13 +2,8 @@ /dts-v1/; /plugin/; -/ { - /* overlay_1 - disable using absolute target path */ +/* overlay_1 - disable using absolute target path */ - fragment@0 { - target-path = "/testcase-data/overlay-node/test-bus/test-unittest1"; - __overlay__ { - status = "disabled"; - }; - }; +&{/testcase-data/overlay-node/test-bus/test-unittest1} { + status = "disabled"; }; diff --git a/drivers/of/unittest-data/overlay_11.dtso b/drivers/of/unittest-data/overlay_11.dtso index 9a79b253a809..7d04ff503a18 100644 --- a/drivers/of/unittest-data/overlay_11.dtso +++ b/drivers/of/unittest-data/overlay_11.dtso @@ -23,6 +23,5 @@ status = "okay"; reg = <1>; }; - }; }; diff --git a/drivers/of/unittest-data/overlay_12.dtso b/drivers/of/unittest-data/overlay_12.dtso index ca3441e2cbec..8d5087793eb4 100644 --- a/drivers/of/unittest-data/overlay_12.dtso +++ b/drivers/of/unittest-data/overlay_12.dtso @@ -2,13 +2,8 @@ /dts-v1/; /plugin/; -/ { - /* overlay_12 - enable using absolute target path (i2c) */ +/* overlay_12 - enable using absolute target path (i2c) */ - fragment@0 { - target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12"; - __overlay__ { - status = "okay"; - }; - }; +&{/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12} { + status = "okay"; }; diff --git a/drivers/of/unittest-data/overlay_13.dtso b/drivers/of/unittest-data/overlay_13.dtso index 3c30dec63894..da200ae94f45 100644 --- a/drivers/of/unittest-data/overlay_13.dtso +++ b/drivers/of/unittest-data/overlay_13.dtso @@ -2,13 +2,8 @@ /dts-v1/; /plugin/; -/ { - /* overlay_13 - disable using absolute target path (i2c) */ +/* overlay_13 - disable using absolute target path (i2c) */ - fragment@0 { - target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13"; - __overlay__ { - status = "disabled"; - }; - }; +&{/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13} { + status = "disabled"; }; diff --git a/drivers/of/unittest-data/overlay_15.dtso b/drivers/of/unittest-data/overlay_15.dtso index 5728490474f6..ba02ae1fed38 100644 --- a/drivers/of/unittest-data/overlay_15.dtso +++ b/drivers/of/unittest-data/overlay_15.dtso @@ -7,6 +7,7 @@ &unittest_i2c_test_bus { #address-cells = <1>; #size-cells = <0>; + test-unittest15 { reg = <11>; compatible = "unittest-i2c-mux"; diff --git a/drivers/of/unittest-data/overlay_4.dtso b/drivers/of/unittest-data/overlay_4.dtso index a8a77ddf9abe..9b9eadddb4a0 100644 --- a/drivers/of/unittest-data/overlay_4.dtso +++ b/drivers/of/unittest-data/overlay_4.dtso @@ -5,7 +5,6 @@ /* overlay_4 - test insertion of a full node */ &unittest_test_bus { - /* suppress DTC warning */ #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso b/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso index 145dfc3b1024..9b53412b2079 100644 --- a/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso +++ b/drivers/of/unittest-data/overlay_bad_add_dup_node.dtso @@ -13,16 +13,15 @@ */ &electric_1 { - motor-1 { controller { - power_bus = < 0x1 0x2 >; + power_bus = <0x1 0x2>; }; }; }; &spin_ctrl_1 { - controller { - power_bus_emergency = < 0x101 0x102 >; - }; + controller { + power_bus_emergency = <0x101 0x102>; + }; }; diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso index 6327d1ffb963..e03f791655b0 100644 --- a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso +++ b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dtso @@ -24,16 +24,15 @@ */ &electric_1 { - motor-1 { electric { - rpm_avail = < 100 >; + rpm_avail = <100>; }; }; }; &spin_ctrl_1 { - electric { - rpm_avail = < 100 200 >; - }; + electric { + rpm_avail = <100 200>; + }; }; diff --git a/drivers/of/unittest-data/overlay_bad_phandle.dtso b/drivers/of/unittest-data/overlay_bad_phandle.dtso index 83b797360318..a61ffc0738e3 100644 --- a/drivers/of/unittest-data/overlay_bad_phandle.dtso +++ b/drivers/of/unittest-data/overlay_bad_phandle.dtso @@ -3,12 +3,11 @@ /plugin/; &electric_1 { - // This label should cause an error when the overlay // is applied. There is already a phandle value // in the base tree for motor-1. spin_ctrl_1_conflict: motor-1 { - accelerate = < 3 >; - decelerate = < 5 >; + accelerate = <3>; + decelerate = <5>; }; }; diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dtso b/drivers/of/unittest-data/overlay_bad_symbol.dtso index 98c6d1de144a..07f730384cdd 100644 --- a/drivers/of/unittest-data/overlay_bad_symbol.dtso +++ b/drivers/of/unittest-data/overlay_bad_symbol.dtso @@ -3,14 +3,13 @@ /plugin/; &electric_1 { - // This label should cause an error when the overlay // is applied. There is already a symbol hvac_1 // in the base tree hvac_1: hvac-medium-2 { compatible = "ot,hvac-medium"; - heat-range = < 50 75 >; - cool-range = < 60 80 >; + heat-range = <50 75>; + cool-range = <60 80>; }; }; diff --git a/drivers/of/unittest-data/overlay_bad_unresolved.dtso b/drivers/of/unittest-data/overlay_bad_unresolved.dtso new file mode 100644 index 000000000000..3b75a53ae8a4 --- /dev/null +++ b/drivers/of/unittest-data/overlay_bad_unresolved.dtso @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +/plugin/; + +&this_label_does_not_exist { + status = "ok"; +}; diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi index 08874a72556e..a9d7cdbd5ddc 100644 --- a/drivers/of/unittest-data/overlay_common.dtsi +++ b/drivers/of/unittest-data/overlay_common.dtsi @@ -16,19 +16,19 @@ electric_1: substation@100 { compatible = "ot,big-volts-control"; - reg = < 0x00000100 0x100 >; + reg = <0x00000100 0x100>; status = "disabled"; hvac_1: hvac-medium-1 { compatible = "ot,hvac-medium"; - heat-range = < 50 75 >; - cool-range = < 60 80 >; + heat-range = <50 75>; + cool-range = <60 80>; }; spin_ctrl_1: motor-1 { compatible = "ot,ferris-wheel-motor"; spin = "clockwise"; - rpm_avail = < 50 >; + rpm_avail = <50>; }; spin_ctrl_2: motor-8 { @@ -41,27 +41,27 @@ #size-cells = <1>; compatible = "ot,rides"; status = "disabled"; - orientation = < 127 >; + orientation = <127>; ride@100 { #address-cells = <1>; #size-cells = <1>; compatible = "ot,roller-coaster"; - reg = < 0x00000100 0x100 >; - hvac-provider = < &hvac_1 >; - hvac-thermostat = < 29 > ; - hvac-zones = < 14 >; + reg = <0x00000100 0x100>; + hvac-provider = <&hvac_1>; + hvac-thermostat = <29> ; + hvac-zones = <14>; hvac-zone-names = "operator"; - spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >; + spin-controller = <&spin_ctrl_2 5 &spin_ctrl_2 7>; spin-controller-names = "track_1", "track_2"; - queues = < 2 >; + queues = <2>; track@30 { - reg = < 0x00000030 0x10 >; + reg = <0x00000030 0x10>; }; track@40 { - reg = < 0x00000040 0x10 >; + reg = <0x00000040 0x10>; }; }; @@ -69,23 +69,21 @@ lights_1: lights@30000 { compatible = "ot,work-lights"; - reg = < 0x00030000 0x1000 >; + reg = <0x00030000 0x1000>; status = "disabled"; }; lights_2: lights@40000 { compatible = "ot,show-lights"; - reg = < 0x00040000 0x1000 >; + reg = <0x00040000 0x1000>; status = "disabled"; - rate = < 13 138 >; + rate = <13 138>; }; retail_1: vending@50000 { - reg = < 0x00050000 0x1000 >; + reg = <0x00050000 0x1000>; compatible = "ot,tickets"; status = "disabled"; }; - }; }; - diff --git a/drivers/of/unittest-data/overlay_gpio_01.dtso b/drivers/of/unittest-data/overlay_gpio_01.dtso index 699ff104ae10..bb3a31a2137a 100644 --- a/drivers/of/unittest-data/overlay_gpio_01.dtso +++ b/drivers/of/unittest-data/overlay_gpio_01.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@0 { compatible = "unittest-gpio"; reg = <0>; diff --git a/drivers/of/unittest-data/overlay_gpio_02a.dtso b/drivers/of/unittest-data/overlay_gpio_02a.dtso index ec59aff6ed47..da955537df74 100644 --- a/drivers/of/unittest-data/overlay_gpio_02a.dtso +++ b/drivers/of/unittest-data/overlay_gpio_02a.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@2 { compatible = "unittest-gpio"; reg = <2>; diff --git a/drivers/of/unittest-data/overlay_gpio_02b.dtso b/drivers/of/unittest-data/overlay_gpio_02b.dtso index 43ce111d41ce..79503965d3d7 100644 --- a/drivers/of/unittest-data/overlay_gpio_02b.dtso +++ b/drivers/of/unittest-data/overlay_gpio_02b.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@2 { line-a { gpio-hog; diff --git a/drivers/of/unittest-data/overlay_gpio_03.dtso b/drivers/of/unittest-data/overlay_gpio_03.dtso index 6e0312340a1b..d8c709616029 100644 --- a/drivers/of/unittest-data/overlay_gpio_03.dtso +++ b/drivers/of/unittest-data/overlay_gpio_03.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@3 { compatible = "unittest-gpio"; reg = <3>; diff --git a/drivers/of/unittest-data/overlay_gpio_04a.dtso b/drivers/of/unittest-data/overlay_gpio_04a.dtso index 7b1e04ebfa7a..de86511972c2 100644 --- a/drivers/of/unittest-data/overlay_gpio_04a.dtso +++ b/drivers/of/unittest-data/overlay_gpio_04a.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@4 { compatible = "unittest-gpio"; reg = <4>; diff --git a/drivers/of/unittest-data/overlay_gpio_04b.dtso b/drivers/of/unittest-data/overlay_gpio_04b.dtso index a14e95c6699a..dc6eff22f927 100644 --- a/drivers/of/unittest-data/overlay_gpio_04b.dtso +++ b/drivers/of/unittest-data/overlay_gpio_04b.dtso @@ -5,6 +5,7 @@ &unittest_test_bus { #address-cells = <1>; #size-cells = <0>; + gpio@4 { line-c { gpio-hog; diff --git a/drivers/of/unittest-data/overlay_pci_node.dtso b/drivers/of/unittest-data/overlay_pci_node.dtso new file mode 100644 index 000000000000..c05e52e9e44a --- /dev/null +++ b/drivers/of/unittest-data/overlay_pci_node.dtso @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +/ { + fragment@0 { + target-path=""; + __overlay__ { + #address-cells = <3>; + #size-cells = <2>; + pci-ep-bus@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x1000>; + reg = <0 0 0 0 0>; + unittest-pci@100 { + compatible = "unittest-pci"; + reg = <0x100 0x200>; + }; + }; + }; + }; +}; diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi index e7887f2301c1..1c2cdf353ae3 100644 --- a/drivers/of/unittest-data/testcases_common.dtsi +++ b/drivers/of/unittest-data/testcases_common.dtsi @@ -5,6 +5,7 @@ changeset { prop-update = "hello"; prop-remove = "world"; + node-remove { }; }; diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi index ecc74dbcc373..7c9f31cc131b 100644 --- a/drivers/of/unittest-data/tests-interrupts.dtsi +++ b/drivers/of/unittest-data/tests-interrupts.dtsi @@ -5,6 +5,7 @@ interrupts { #address-cells = <1>; #size-cells = <1>; + test_intc0: intc0 { interrupt-controller; #interrupt-cells = <1>; diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi index 4ea024d908ee..eb35e8aa5d5a 100644 --- a/drivers/of/unittest-data/tests-overlay.dtsi +++ b/drivers/of/unittest-data/tests-overlay.dtsi @@ -3,7 +3,6 @@ / { testcase-data { overlay-node { - /* test bus */ unittest_test_bus: test-bus { compatible = "simple-bus"; diff --git a/drivers/of/unittest-data/tests-phandle.dtsi b/drivers/of/unittest-data/tests-phandle.dtsi index 6b33be4c4416..d01f92f0f0db 100644 --- a/drivers/of/unittest-data/tests-phandle.dtsi +++ b/drivers/of/unittest-data/tests-phandle.dtsi @@ -8,7 +8,9 @@ testcase: testcase-data { security-password = "password"; duplicate-name = "duplicate"; + duplicate-name { }; + phandle-tests { provider0: provider0 { #phandle-cells = <0>; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index b545fcb22536..ad2b7879cc67 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -22,6 +22,7 @@ #include <linux/slab.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/pci.h> #include <linux/kernel.h> #include <linux/i2c.h> @@ -77,7 +78,7 @@ static void __init of_unittest_find_node_by_name(void) np = of_find_node_by_path("/testcase-data"); name = kasprintf(GFP_KERNEL, "%pOF", np); - unittest(np && !strcmp("/testcase-data", name), + unittest(np && name && !strcmp("/testcase-data", name), "find /testcase-data failed\n"); of_node_put(np); kfree(name); @@ -88,14 +89,14 @@ static void __init of_unittest_find_node_by_name(void) np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); name = kasprintf(GFP_KERNEL, "%pOF", np); - unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name), + unittest(np && name && !strcmp("/testcase-data/phandle-tests/consumer-a", name), "find /testcase-data/phandle-tests/consumer-a failed\n"); of_node_put(np); kfree(name); np = of_find_node_by_path("testcase-alias"); name = kasprintf(GFP_KERNEL, "%pOF", np); - unittest(np && !strcmp("/testcase-data", name), + unittest(np && name && !strcmp("/testcase-data", name), "find testcase-alias failed\n"); of_node_put(np); kfree(name); @@ -106,7 +107,7 @@ static void __init of_unittest_find_node_by_name(void) np = of_find_node_by_path("testcase-alias/phandle-tests/consumer-a"); name = kasprintf(GFP_KERNEL, "%pOF", np); - unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name), + unittest(np && name && !strcmp("/testcase-data/phandle-tests/consumer-a", name), "find testcase-alias/phandle-tests/consumer-a failed\n"); of_node_put(np); kfree(name); @@ -796,14 +797,18 @@ static void __init of_unittest_property_copy(void) static void __init of_unittest_changeset(void) { #ifdef CONFIG_OF_DYNAMIC + int ret; struct property *ppadd, padd = { .name = "prop-add", .length = 1, .value = "" }; struct property *ppname_n1, pname_n1 = { .name = "name", .length = 3, .value = "n1" }; struct property *ppname_n2, pname_n2 = { .name = "name", .length = 3, .value = "n2" }; struct property *ppname_n21, pname_n21 = { .name = "name", .length = 3, .value = "n21" }; struct property *ppupdate, pupdate = { .name = "prop-update", .length = 5, .value = "abcd" }; struct property *ppremove; - struct device_node *n1, *n2, *n21, *nchangeset, *nremove, *parent, *np; + struct device_node *n1, *n2, *n21, *n22, *nchangeset, *nremove, *parent, *np; + static const char * const str_array[] = { "str1", "str2", "str3" }; + const u32 u32_array[] = { 1, 2, 3 }; struct of_changeset chgset; + const char *propstr = NULL; n1 = __of_node_dup(NULL, "n1"); unittest(n1, "testcase setup failure\n"); @@ -857,6 +862,17 @@ static void __init of_unittest_changeset(void) unittest(!of_changeset_add_property(&chgset, parent, ppadd), "fail add prop prop-add\n"); unittest(!of_changeset_update_property(&chgset, parent, ppupdate), "fail update prop\n"); unittest(!of_changeset_remove_property(&chgset, parent, ppremove), "fail remove prop\n"); + n22 = of_changeset_create_node(&chgset, n2, "n22"); + unittest(n22, "fail create n22\n"); + unittest(!of_changeset_add_prop_string(&chgset, n22, "prop-str", "abcd"), + "fail add prop prop-str"); + unittest(!of_changeset_add_prop_string_array(&chgset, n22, "prop-str-array", + (const char **)str_array, + ARRAY_SIZE(str_array)), + "fail add prop prop-str-array"); + unittest(!of_changeset_add_prop_u32_array(&chgset, n22, "prop-u32-array", + u32_array, ARRAY_SIZE(u32_array)), + "fail add prop prop-u32-array"); unittest(!of_changeset_apply(&chgset), "apply failed\n"); @@ -866,14 +882,29 @@ static void __init of_unittest_changeset(void) unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")), "'%pOF' not added\n", n21); of_node_put(np); + unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n22")), + "'%pOF' not added\n", n22); + of_node_put(np); unittest(!of_changeset_revert(&chgset), "revert failed\n"); + unittest(!of_find_node_by_path("/testcase-data/changeset/n2/n21"), + "'%pOF' still present after revert\n", n21); + + ppremove = of_find_property(parent, "prop-remove", NULL); + unittest(ppremove, "failed to find removed prop after revert\n"); + + ret = of_property_read_string(parent, "prop-update", &propstr); + unittest(!ret, "failed to find updated prop after revert\n"); + if (!ret) + unittest(strcmp(propstr, "hello") == 0, "original value not in updated property after revert"); + of_changeset_destroy(&chgset); of_node_put(n1); of_node_put(n2); of_node_put(n21); + of_node_put(n22); #endif } @@ -1533,6 +1564,8 @@ static void attach_node_and_children(struct device_node *np) const char *full_name; full_name = kasprintf(GFP_KERNEL, "%pOF", np); + if (!full_name) + return; if (!strcmp(full_name, "/__local_fixups__") || !strcmp(full_name, "/__fixups__")) { @@ -1694,7 +1727,7 @@ static struct platform_driver unittest_driver = { .remove_new = unittest_remove, .driver = { .name = "unittest", - .of_match_table = of_match_ptr(unittest_match), + .of_match_table = unittest_match, }, }; @@ -1795,7 +1828,7 @@ static struct platform_driver unittest_gpio_driver = { .remove_new = unittest_gpio_remove, .driver = { .name = "unittest-gpio", - .of_match_table = of_match_ptr(unittest_gpio_id), + .of_match_table = unittest_gpio_id, }, }; @@ -2101,14 +2134,13 @@ static int __init of_unittest_apply_overlay(int overlay_nr, int *ovcs_id) return 0; } -/* apply an overlay while checking before and after states */ -static int __init of_unittest_apply_overlay_check(int overlay_nr, +static int __init __of_unittest_apply_overlay_check(int overlay_nr, int unittest_nr, int before, int after, enum overlay_type ovtype) { int ret, ovcs_id; - /* unittest device must not be in before state */ + /* unittest device must be in before state */ if (of_unittest_device_exists(unittest_nr, ovtype) != before) { unittest(0, "%s with device @\"%s\" %s\n", overlay_name_from_nr(overlay_nr), @@ -2117,6 +2149,7 @@ static int __init of_unittest_apply_overlay_check(int overlay_nr, return -EINVAL; } + /* apply the overlay */ ovcs_id = 0; ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id); if (ret != 0) { @@ -2124,15 +2157,28 @@ static int __init of_unittest_apply_overlay_check(int overlay_nr, return ret; } - /* unittest device must be to set to after state */ + /* unittest device must be in after state */ if (of_unittest_device_exists(unittest_nr, ovtype) != after) { - unittest(0, "%s failed to create @\"%s\" %s\n", + unittest(0, "%s with device @\"%s\" %s\n", overlay_name_from_nr(overlay_nr), unittest_path(unittest_nr, ovtype), !after ? "enabled" : "disabled"); return -EINVAL; } + return ovcs_id; +} + +/* apply an overlay while checking before and after states */ +static int __init of_unittest_apply_overlay_check(int overlay_nr, + int unittest_nr, int before, int after, + enum overlay_type ovtype) +{ + int ovcs_id = __of_unittest_apply_overlay_check(overlay_nr, + unittest_nr, before, after, ovtype); + if (ovcs_id < 0) + return ovcs_id; + return 0; } @@ -2143,32 +2189,12 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, { int ret, ovcs_id, save_ovcs_id; - /* unittest device must be in before state */ - if (of_unittest_device_exists(unittest_nr, ovtype) != before) { - unittest(0, "%s with device @\"%s\" %s\n", - overlay_name_from_nr(overlay_nr), - unittest_path(unittest_nr, ovtype), - !before ? "enabled" : "disabled"); - return -EINVAL; - } - - /* apply the overlay */ - ovcs_id = 0; - ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id); - if (ret != 0) { - /* of_unittest_apply_overlay already called unittest() */ - return ret; - } - - /* unittest device must be in after state */ - if (of_unittest_device_exists(unittest_nr, ovtype) != after) { - unittest(0, "%s failed to create @\"%s\" %s\n", - overlay_name_from_nr(overlay_nr), - unittest_path(unittest_nr, ovtype), - !after ? "enabled" : "disabled"); - return -EINVAL; - } + ovcs_id = __of_unittest_apply_overlay_check(overlay_nr, unittest_nr, + before, after, ovtype); + if (ovcs_id < 0) + return ovcs_id; + /* remove the overlay */ save_ovcs_id = ovcs_id; ret = of_overlay_remove(&ovcs_id); if (ret != 0) { @@ -2180,7 +2206,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, of_unittest_untrack_overlay(save_ovcs_id); /* unittest device must be again in before state */ - if (of_unittest_device_exists(unittest_nr, PDEV_OVERLAY) != before) { + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { unittest(0, "%s with device @\"%s\" %s\n", overlay_name_from_nr(overlay_nr), unittest_path(unittest_nr, ovtype), @@ -2622,7 +2648,7 @@ static struct platform_driver unittest_i2c_bus_driver = { .remove_new = unittest_i2c_bus_remove, .driver = { .name = "unittest-i2c-bus", - .of_match_table = of_match_ptr(unittest_i2c_bus_match), + .of_match_table = unittest_i2c_bus_match, }, }; @@ -2971,12 +2997,6 @@ static void __init of_unittest_overlay_notify(void) unittest(ovcs_id, "ovcs_id not created for overlay_17\n"); - if (ovcs_id) { - ret = of_overlay_remove(&ovcs_id); - unittest(!ret, - "overlay_17 of_overlay_remove(), ret = %d\n", ret); - } - /* --- overlay 18 --- */ unittest(overlay_data_apply("overlay_18", &ovcs_id), @@ -3046,6 +3066,7 @@ static void __init of_unittest_overlay_notify(void) static void __init of_unittest_overlay(void) { struct device_node *bus_np = NULL; + unsigned int i; if (platform_driver_register(&unittest_driver)) { unittest(0, "could not register unittest driver\n"); @@ -3083,7 +3104,8 @@ static void __init of_unittest_overlay(void) of_unittest_overlay_2(); of_unittest_overlay_3(); of_unittest_overlay_4(); - of_unittest_overlay_5(); + for (i = 0; i < 3; i++) + of_unittest_overlay_5(); of_unittest_overlay_6(); of_unittest_overlay_8(); @@ -3264,17 +3286,19 @@ out_skip_tests: extern uint8_t __dtbo_##overlay_name##_begin[]; \ extern uint8_t __dtbo_##overlay_name##_end[] -#define OVERLAY_INFO(overlay_name, expected) \ -{ .dtbo_begin = __dtbo_##overlay_name##_begin, \ - .dtbo_end = __dtbo_##overlay_name##_end, \ - .expected_result = expected, \ - .name = #overlay_name, \ +#define OVERLAY_INFO(overlay_name, expected, expected_remove) \ +{ .dtbo_begin = __dtbo_##overlay_name##_begin, \ + .dtbo_end = __dtbo_##overlay_name##_end, \ + .expected_result = expected, \ + .expected_result_remove = expected_remove, \ + .name = #overlay_name, \ } struct overlay_info { uint8_t *dtbo_begin; uint8_t *dtbo_end; int expected_result; + int expected_result_remove; /* if apply failed */ int ovcs_id; char *name; }; @@ -3307,47 +3331,51 @@ OVERLAY_INFO_EXTERN(overlay_gpio_02b); OVERLAY_INFO_EXTERN(overlay_gpio_03); OVERLAY_INFO_EXTERN(overlay_gpio_04a); OVERLAY_INFO_EXTERN(overlay_gpio_04b); +OVERLAY_INFO_EXTERN(overlay_pci_node); OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node); OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop); OVERLAY_INFO_EXTERN(overlay_bad_phandle); OVERLAY_INFO_EXTERN(overlay_bad_symbol); +OVERLAY_INFO_EXTERN(overlay_bad_unresolved); /* entries found by name */ static struct overlay_info overlays[] = { - OVERLAY_INFO(overlay_base, -9999), - OVERLAY_INFO(overlay, 0), - OVERLAY_INFO(overlay_0, 0), - OVERLAY_INFO(overlay_1, 0), - OVERLAY_INFO(overlay_2, 0), - OVERLAY_INFO(overlay_3, 0), - OVERLAY_INFO(overlay_4, 0), - OVERLAY_INFO(overlay_5, 0), - OVERLAY_INFO(overlay_6, 0), - OVERLAY_INFO(overlay_7, 0), - OVERLAY_INFO(overlay_8, 0), - OVERLAY_INFO(overlay_9, 0), - OVERLAY_INFO(overlay_10, 0), - OVERLAY_INFO(overlay_11, 0), - OVERLAY_INFO(overlay_12, 0), - OVERLAY_INFO(overlay_13, 0), - OVERLAY_INFO(overlay_15, 0), - OVERLAY_INFO(overlay_16, -EBUSY), - OVERLAY_INFO(overlay_17, -EEXIST), - OVERLAY_INFO(overlay_18, 0), - OVERLAY_INFO(overlay_19, 0), - OVERLAY_INFO(overlay_20, 0), - OVERLAY_INFO(overlay_gpio_01, 0), - OVERLAY_INFO(overlay_gpio_02a, 0), - OVERLAY_INFO(overlay_gpio_02b, 0), - OVERLAY_INFO(overlay_gpio_03, 0), - OVERLAY_INFO(overlay_gpio_04a, 0), - OVERLAY_INFO(overlay_gpio_04b, 0), - OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL), - OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL), - OVERLAY_INFO(overlay_bad_phandle, -EINVAL), - OVERLAY_INFO(overlay_bad_symbol, -EINVAL), + OVERLAY_INFO(overlay_base, -9999, 0), + OVERLAY_INFO(overlay, 0, 0), + OVERLAY_INFO(overlay_0, 0, 0), + OVERLAY_INFO(overlay_1, 0, 0), + OVERLAY_INFO(overlay_2, 0, 0), + OVERLAY_INFO(overlay_3, 0, 0), + OVERLAY_INFO(overlay_4, 0, 0), + OVERLAY_INFO(overlay_5, 0, 0), + OVERLAY_INFO(overlay_6, 0, 0), + OVERLAY_INFO(overlay_7, 0, 0), + OVERLAY_INFO(overlay_8, 0, 0), + OVERLAY_INFO(overlay_9, 0, 0), + OVERLAY_INFO(overlay_10, 0, 0), + OVERLAY_INFO(overlay_11, 0, 0), + OVERLAY_INFO(overlay_12, 0, 0), + OVERLAY_INFO(overlay_13, 0, 0), + OVERLAY_INFO(overlay_15, 0, 0), + OVERLAY_INFO(overlay_16, -EBUSY, 0), + OVERLAY_INFO(overlay_17, -EEXIST, 0), + OVERLAY_INFO(overlay_18, 0, 0), + OVERLAY_INFO(overlay_19, 0, 0), + OVERLAY_INFO(overlay_20, 0, 0), + OVERLAY_INFO(overlay_gpio_01, 0, 0), + OVERLAY_INFO(overlay_gpio_02a, 0, 0), + OVERLAY_INFO(overlay_gpio_02b, 0, 0), + OVERLAY_INFO(overlay_gpio_03, 0, 0), + OVERLAY_INFO(overlay_gpio_04a, 0, 0), + OVERLAY_INFO(overlay_gpio_04b, 0, 0), + OVERLAY_INFO(overlay_pci_node, 0, 0), + OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL, -ENODEV), + OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL, -ENODEV), + OVERLAY_INFO(overlay_bad_phandle, -EINVAL, 0), + OVERLAY_INFO(overlay_bad_symbol, -EINVAL, -ENODEV), + OVERLAY_INFO(overlay_bad_unresolved, -EINVAL, 0), /* end marker */ - {.dtbo_begin = NULL, .dtbo_end = NULL, .expected_result = 0, .name = NULL} + { } }; static struct device_node *overlay_base_root; @@ -3442,8 +3470,9 @@ void __init unittest_unflatten_overlay_base(void) static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id) { struct overlay_info *info; + int passed = 1; int found = 0; - int ret; + int ret, ret2; u32 size; for (info = overlays; info && info->name; info++) { @@ -3461,7 +3490,8 @@ static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id) if (!size) pr_err("no overlay data for %s\n", overlay_name); - ret = of_overlay_fdt_apply(info->dtbo_begin, size, &info->ovcs_id); + ret = of_overlay_fdt_apply(info->dtbo_begin, size, &info->ovcs_id, + NULL); if (ovcs_id) *ovcs_id = info->ovcs_id; if (ret < 0) @@ -3470,11 +3500,24 @@ static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id) pr_debug("%s applied\n", overlay_name); out: - if (ret != info->expected_result) + if (ret != info->expected_result) { pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n", info->expected_result, ret, overlay_name); + passed = 0; + } - return (ret == info->expected_result); + if (ret < 0) { + /* changeset may be partially applied */ + ret2 = of_overlay_remove(&info->ovcs_id); + if (ret2 != info->expected_result_remove) { + pr_err("of_overlay_remove() expected %d, ret=%d, %s\n", + info->expected_result_remove, ret2, + overlay_name); + passed = 0; + } + } + + return passed; } /* @@ -3613,6 +3656,8 @@ static __init void of_unittest_overlay_high_level(void) /* now do the normal overlay usage test */ + /* --- overlay --- */ + EXPECT_BEGIN(KERN_ERR, "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status"); EXPECT_BEGIN(KERN_ERR, @@ -3663,51 +3708,283 @@ static __init void of_unittest_overlay_high_level(void) unittest(ret, "Adding overlay 'overlay' failed\n"); + /* --- overlay_bad_add_dup_node --- */ + EXPECT_BEGIN(KERN_ERR, "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); EXPECT_BEGIN(KERN_ERR, "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); + EXPECT_BEGIN(KERN_ERR, + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/controller:name"); + EXPECT_BEGIN(KERN_ERR, + "OF: Error reverting changeset (-19)"); unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL), "Adding overlay 'overlay_bad_add_dup_node' failed\n"); EXPECT_END(KERN_ERR, + "OF: Error reverting changeset (-19)"); + EXPECT_END(KERN_ERR, + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/controller:name"); + EXPECT_END(KERN_ERR, "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); EXPECT_END(KERN_ERR, "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); + /* --- overlay_bad_add_dup_prop --- */ + EXPECT_BEGIN(KERN_ERR, "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); EXPECT_BEGIN(KERN_ERR, "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); EXPECT_BEGIN(KERN_ERR, "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); + EXPECT_BEGIN(KERN_ERR, + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/electric:name"); + EXPECT_BEGIN(KERN_ERR, + "OF: Error reverting changeset (-19)"); unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL), "Adding overlay 'overlay_bad_add_dup_prop' failed\n"); EXPECT_END(KERN_ERR, - "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); + "OF: Error reverting changeset (-19)"); EXPECT_END(KERN_ERR, - "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/electric:name"); EXPECT_END(KERN_ERR, - "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); + "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); + EXPECT_END(KERN_ERR, + "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); + EXPECT_END(KERN_ERR, + "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); + + /* --- overlay_bad_phandle --- */ unittest(overlay_data_apply("overlay_bad_phandle", NULL), "Adding overlay 'overlay_bad_phandle' failed\n"); + /* --- overlay_bad_symbol --- */ + + EXPECT_BEGIN(KERN_ERR, + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/hvac-medium-2:name"); + EXPECT_BEGIN(KERN_ERR, + "OF: Error reverting changeset (-19)"); + unittest(overlay_data_apply("overlay_bad_symbol", NULL), "Adding overlay 'overlay_bad_symbol' failed\n"); + EXPECT_END(KERN_ERR, + "OF: Error reverting changeset (-19)"); + EXPECT_END(KERN_ERR, + "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/hvac-medium-2:name"); + + /* --- overlay_bad_unresolved --- */ + + EXPECT_BEGIN(KERN_ERR, + "OF: resolver: node label 'this_label_does_not_exist' not found in live devicetree symbols table"); + EXPECT_BEGIN(KERN_ERR, + "OF: resolver: overlay phandle fixup failed: -22"); + + unittest(overlay_data_apply("overlay_bad_unresolved", NULL), + "Adding overlay 'overlay_bad_unresolved' failed\n"); + + EXPECT_END(KERN_ERR, + "OF: resolver: overlay phandle fixup failed: -22"); + EXPECT_END(KERN_ERR, + "OF: resolver: node label 'this_label_does_not_exist' not found in live devicetree symbols table"); + return; err_unlock: mutex_unlock(&of_mutex); } +static int of_unittest_pci_dev_num; +static int of_unittest_pci_child_num; + +/* + * PCI device tree node test driver + */ +static const struct pci_device_id testdrv_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_REDHAT, 0x5), }, /* PCI_VENDOR_ID_REDHAT */ + { 0, } +}; + +static int testdrv_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct overlay_info *info; + struct device_node *dn; + int ret, ovcs_id; + u32 size; + + dn = pdev->dev.of_node; + if (!dn) { + dev_err(&pdev->dev, "does not find bus endpoint"); + return -EINVAL; + } + + for (info = overlays; info && info->name; info++) { + if (!strcmp(info->name, "overlay_pci_node")) + break; + } + if (!info || !info->name) { + dev_err(&pdev->dev, "no overlay data for overlay_pci_node"); + return -ENODEV; + } + + size = info->dtbo_end - info->dtbo_begin; + ret = of_overlay_fdt_apply(info->dtbo_begin, size, &ovcs_id, dn); + of_node_put(dn); + if (ret) + return ret; + + of_platform_default_populate(dn, NULL, &pdev->dev); + pci_set_drvdata(pdev, (void *)(uintptr_t)ovcs_id); + + return 0; +} + +static void testdrv_remove(struct pci_dev *pdev) +{ + int ovcs_id = (int)(uintptr_t)pci_get_drvdata(pdev); + + of_platform_depopulate(&pdev->dev); + of_overlay_remove(&ovcs_id); +} + +static struct pci_driver testdrv_driver = { + .name = "pci_dt_testdrv", + .id_table = testdrv_pci_ids, + .probe = testdrv_probe, + .remove = testdrv_remove, +}; + +static int unittest_pci_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev; + u64 exp_addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + dev = &pdev->dev; + while (dev && !dev_is_pci(dev)) + dev = dev->parent; + if (!dev) { + pr_err("unable to find parent device\n"); + return -ENODEV; + } + + exp_addr = pci_resource_start(to_pci_dev(dev), 0) + 0x100; + unittest(res->start == exp_addr, "Incorrect translated address %llx, expected %llx\n", + (u64)res->start, exp_addr); + + of_unittest_pci_child_num++; + + return 0; +} + +static const struct of_device_id unittest_pci_of_match[] = { + { .compatible = "unittest-pci" }, + { } +}; + +static struct platform_driver unittest_pci_driver = { + .probe = unittest_pci_probe, + .driver = { + .name = "unittest-pci", + .of_match_table = unittest_pci_of_match, + }, +}; + +static int of_unittest_pci_node_verify(struct pci_dev *pdev, bool add) +{ + struct device_node *pnp, *np = NULL; + struct device *child_dev; + char *path = NULL; + const __be32 *reg; + int rc = 0; + + pnp = pdev->dev.of_node; + unittest(pnp, "Failed creating PCI dt node\n"); + if (!pnp) + return -ENODEV; + + if (add) { + path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0/unittest-pci@100", pnp); + np = of_find_node_by_path(path); + unittest(np, "Failed to get unittest-pci node under PCI node\n"); + if (!np) { + rc = -ENODEV; + goto failed; + } + + reg = of_get_property(np, "reg", NULL); + unittest(reg, "Failed to get reg property\n"); + if (!reg) + rc = -ENODEV; + } else { + path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0", pnp); + np = of_find_node_by_path(path); + unittest(!np, "Child device tree node is not removed\n"); + child_dev = device_find_any_child(&pdev->dev); + unittest(!child_dev, "Child device is not removed\n"); + } + +failed: + kfree(path); + if (np) + of_node_put(np); + + return rc; +} + +static void __init of_unittest_pci_node(void) +{ + struct pci_dev *pdev = NULL; + int rc; + + if (!IS_ENABLED(CONFIG_PCI_DYNAMIC_OF_NODES)) + return; + + rc = pci_register_driver(&testdrv_driver); + unittest(!rc, "Failed to register pci test driver; rc = %d\n", rc); + if (rc) + return; + + rc = platform_driver_register(&unittest_pci_driver); + if (unittest(!rc, "Failed to register unittest pci driver\n")) { + pci_unregister_driver(&testdrv_driver); + return; + } + + while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL) { + of_unittest_pci_node_verify(pdev, true); + of_unittest_pci_dev_num++; + } + if (pdev) + pci_dev_put(pdev); + + unittest(of_unittest_pci_dev_num, + "No test PCI device been found. Please run QEMU with '-device pci-testdev'\n"); + unittest(of_unittest_pci_dev_num == of_unittest_pci_child_num, + "Child device number %d is not expected %d", of_unittest_pci_child_num, + of_unittest_pci_dev_num); + + platform_driver_unregister(&unittest_pci_driver); + pci_unregister_driver(&testdrv_driver); + + while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL) + of_unittest_pci_node_verify(pdev, false); + if (pdev) + pci_dev_put(pdev); +} #else static inline __init void of_unittest_overlay_high_level(void) {} +static inline __init void of_unittest_pci_node(void) { } #endif @@ -3761,6 +4038,7 @@ static int __init of_unittest(void) of_unittest_platform_populate(); of_unittest_overlay(); of_unittest_lifecycle(); + of_unittest_pci_node(); /* Double check linkage after removing testcase data */ of_unittest_check_tree_linkage(); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 3c07d8d214b3..49bd09c7dd0a 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -194,6 +194,18 @@ config PCI_HYPERV The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. +config PCI_DYNAMIC_OF_NODES + bool "Create Device tree nodes for PCI devices" + depends on OF + select OF_DYNAMIC + help + This option enables support for generating device tree nodes for some + PCI devices. Thus, the driver of this kind can load and overlay + flattened device tree for its downstream devices. + + Once this option is selected, the device tree nodes will be generated + for all PCI bridges. + choice prompt "PCI Express hierarchy optimization setting" default PCIE_BUS_DEFAULT diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 2680e4c92f0a..cc8b4e01e29d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o obj-$(CONFIG_VGA_ARB) += vgaarb.o obj-$(CONFIG_PCI_DOE) += doe.o +obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 46b252bbe500..9c2137dae429 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -342,6 +342,8 @@ void pci_bus_add_device(struct pci_dev *dev) */ pcibios_bus_add_device(dev); pci_fixup_device(pci_fixup_final, dev); + if (pci_is_bridge(dev)) + of_pci_make_dev_node(dev); pci_create_sysfs_dev_files(dev); pci_proc_attach_device(dev); pci_bridge_d3_update(dev); diff --git a/drivers/pci/of.c b/drivers/pci/of.c index 3c158b17dcb5..2af64bcb7da3 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -606,6 +606,85 @@ int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge) return pci_parse_request_of_pci_ranges(dev, bridge); } +#ifdef CONFIG_PCI_DYNAMIC_OF_NODES + +void of_pci_remove_node(struct pci_dev *pdev) +{ + struct device_node *np; + + np = pci_device_to_OF_node(pdev); + if (!np || !of_node_check_flag(np, OF_DYNAMIC)) + return; + pdev->dev.of_node = NULL; + + of_changeset_revert(np->data); + of_changeset_destroy(np->data); + of_node_put(np); +} + +void of_pci_make_dev_node(struct pci_dev *pdev) +{ + struct device_node *ppnode, *np = NULL; + const char *pci_type; + struct of_changeset *cset; + const char *name; + int ret; + + /* + * If there is already a device tree node linked to this device, + * return immediately. + */ + if (pci_device_to_OF_node(pdev)) + return; + + /* Check if there is device tree node for parent device */ + if (!pdev->bus->self) + ppnode = pdev->bus->dev.of_node; + else + ppnode = pdev->bus->self->dev.of_node; + if (!ppnode) + return; + + if (pci_is_bridge(pdev)) + pci_type = "pci"; + else + pci_type = "dev"; + + name = kasprintf(GFP_KERNEL, "%s@%x,%x", pci_type, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + if (!name) + return; + + cset = kmalloc(sizeof(*cset), GFP_KERNEL); + if (!cset) + goto failed; + of_changeset_init(cset); + + np = of_changeset_create_node(cset, ppnode, name); + if (!np) + goto failed; + np->data = cset; + + ret = of_pci_add_properties(pdev, cset, np); + if (ret) + goto failed; + + ret = of_changeset_apply(cset); + if (ret) + goto failed; + + pdev->dev.of_node = np; + kfree(name); + + return; + +failed: + if (np) + of_node_put(np); + kfree(name); +} +#endif + #endif /* CONFIG_PCI */ /** diff --git a/drivers/pci/of_property.c b/drivers/pci/of_property.c new file mode 100644 index 000000000000..710ec35ba4a1 --- /dev/null +++ b/drivers/pci/of_property.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include "pci.h" + +#define OF_PCI_ADDRESS_CELLS 3 +#define OF_PCI_SIZE_CELLS 2 +#define OF_PCI_MAX_INT_PIN 4 + +struct of_pci_addr_pair { + u32 phys_addr[OF_PCI_ADDRESS_CELLS]; + u32 size[OF_PCI_SIZE_CELLS]; +}; + +/* + * Each entry in the ranges table is a tuple containing the child address, + * the parent address, and the size of the region in the child address space. + * Thus, for PCI, in each entry parent address is an address on the primary + * side and the child address is the corresponding address on the secondary + * side. + */ +struct of_pci_range { + u32 child_addr[OF_PCI_ADDRESS_CELLS]; + u32 parent_addr[OF_PCI_ADDRESS_CELLS]; + u32 size[OF_PCI_SIZE_CELLS]; +}; + +#define OF_PCI_ADDR_SPACE_IO 0x1 +#define OF_PCI_ADDR_SPACE_MEM32 0x2 +#define OF_PCI_ADDR_SPACE_MEM64 0x3 + +#define OF_PCI_ADDR_FIELD_NONRELOC BIT(31) +#define OF_PCI_ADDR_FIELD_SS GENMASK(25, 24) +#define OF_PCI_ADDR_FIELD_PREFETCH BIT(30) +#define OF_PCI_ADDR_FIELD_BUS GENMASK(23, 16) +#define OF_PCI_ADDR_FIELD_DEV GENMASK(15, 11) +#define OF_PCI_ADDR_FIELD_FUNC GENMASK(10, 8) +#define OF_PCI_ADDR_FIELD_REG GENMASK(7, 0) + +enum of_pci_prop_compatible { + PROP_COMPAT_PCI_VVVV_DDDD, + PROP_COMPAT_PCICLASS_CCSSPP, + PROP_COMPAT_PCICLASS_CCSS, + PROP_COMPAT_NUM, +}; + +static void of_pci_set_address(struct pci_dev *pdev, u32 *prop, u64 addr, + u32 reg_num, u32 flags, bool reloc) +{ + prop[0] = FIELD_PREP(OF_PCI_ADDR_FIELD_BUS, pdev->bus->number) | + FIELD_PREP(OF_PCI_ADDR_FIELD_DEV, PCI_SLOT(pdev->devfn)) | + FIELD_PREP(OF_PCI_ADDR_FIELD_FUNC, PCI_FUNC(pdev->devfn)); + prop[0] |= flags | reg_num; + if (!reloc) { + prop[0] |= OF_PCI_ADDR_FIELD_NONRELOC; + prop[1] = upper_32_bits(addr); + prop[2] = lower_32_bits(addr); + } +} + +static int of_pci_get_addr_flags(struct resource *res, u32 *flags) +{ + u32 ss; + + if (res->flags & IORESOURCE_IO) + ss = OF_PCI_ADDR_SPACE_IO; + else if (res->flags & IORESOURCE_MEM_64) + ss = OF_PCI_ADDR_SPACE_MEM64; + else if (res->flags & IORESOURCE_MEM) + ss = OF_PCI_ADDR_SPACE_MEM32; + else + return -EINVAL; + + *flags = 0; + if (res->flags & IORESOURCE_PREFETCH) + *flags |= OF_PCI_ADDR_FIELD_PREFETCH; + + *flags |= FIELD_PREP(OF_PCI_ADDR_FIELD_SS, ss); + + return 0; +} + +static int of_pci_prop_bus_range(struct pci_dev *pdev, + struct of_changeset *ocs, + struct device_node *np) +{ + u32 bus_range[] = { pdev->subordinate->busn_res.start, + pdev->subordinate->busn_res.end }; + + return of_changeset_add_prop_u32_array(ocs, np, "bus-range", bus_range, + ARRAY_SIZE(bus_range)); +} + +static int of_pci_prop_ranges(struct pci_dev *pdev, struct of_changeset *ocs, + struct device_node *np) +{ + struct of_pci_range *rp; + struct resource *res; + int i, j, ret; + u32 flags, num; + u64 val64; + + if (pci_is_bridge(pdev)) { + num = PCI_BRIDGE_RESOURCE_NUM; + res = &pdev->resource[PCI_BRIDGE_RESOURCES]; + } else { + num = PCI_STD_NUM_BARS; + res = &pdev->resource[PCI_STD_RESOURCES]; + } + + rp = kcalloc(num, sizeof(*rp), GFP_KERNEL); + if (!rp) + return -ENOMEM; + + for (i = 0, j = 0; j < num; j++) { + if (!resource_size(&res[j])) + continue; + + if (of_pci_get_addr_flags(&res[j], &flags)) + continue; + + val64 = res[j].start; + of_pci_set_address(pdev, rp[i].parent_addr, val64, 0, flags, + false); + if (pci_is_bridge(pdev)) { + memcpy(rp[i].child_addr, rp[i].parent_addr, + sizeof(rp[i].child_addr)); + } else { + /* + * For endpoint device, the lower 64-bits of child + * address is always zero. + */ + rp[i].child_addr[0] = j; + } + + val64 = resource_size(&res[j]); + rp[i].size[0] = upper_32_bits(val64); + rp[i].size[1] = lower_32_bits(val64); + + i++; + } + + ret = of_changeset_add_prop_u32_array(ocs, np, "ranges", (u32 *)rp, + i * sizeof(*rp) / sizeof(u32)); + kfree(rp); + + return ret; +} + +static int of_pci_prop_reg(struct pci_dev *pdev, struct of_changeset *ocs, + struct device_node *np) +{ + struct of_pci_addr_pair reg = { 0 }; + + /* configuration space */ + of_pci_set_address(pdev, reg.phys_addr, 0, 0, 0, true); + + return of_changeset_add_prop_u32_array(ocs, np, "reg", (u32 *)®, + sizeof(reg) / sizeof(u32)); +} + +static int of_pci_prop_interrupts(struct pci_dev *pdev, + struct of_changeset *ocs, + struct device_node *np) +{ + int ret; + u8 pin; + + ret = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (ret != 0) + return ret; + + if (!pin) + return 0; + + return of_changeset_add_prop_u32(ocs, np, "interrupts", (u32)pin); +} + +static int of_pci_prop_intr_map(struct pci_dev *pdev, struct of_changeset *ocs, + struct device_node *np) +{ + struct of_phandle_args out_irq[OF_PCI_MAX_INT_PIN]; + u32 i, addr_sz[OF_PCI_MAX_INT_PIN], map_sz = 0; + __be32 laddr[OF_PCI_ADDRESS_CELLS] = { 0 }; + u32 int_map_mask[] = { 0xffff00, 0, 0, 7 }; + struct device_node *pnode; + struct pci_dev *child; + u32 *int_map, *mapp; + int ret; + u8 pin; + + pnode = pci_device_to_OF_node(pdev->bus->self); + if (!pnode) + pnode = pci_bus_to_OF_node(pdev->bus); + + if (!pnode) { + pci_err(pdev, "failed to get parent device node"); + return -EINVAL; + } + + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + for (pin = 1; pin <= OF_PCI_MAX_INT_PIN; pin++) { + i = pin - 1; + out_irq[i].np = pnode; + out_irq[i].args_count = 1; + out_irq[i].args[0] = pin; + ret = of_irq_parse_raw(laddr, &out_irq[i]); + if (ret) { + pci_err(pdev, "parse irq %d failed, ret %d", pin, ret); + continue; + } + ret = of_property_read_u32(out_irq[i].np, "#address-cells", + &addr_sz[i]); + if (ret) + addr_sz[i] = 0; + } + + list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { + for (pin = 1; pin <= OF_PCI_MAX_INT_PIN; pin++) { + i = pci_swizzle_interrupt_pin(child, pin) - 1; + map_sz += 5 + addr_sz[i] + out_irq[i].args_count; + } + } + + int_map = kcalloc(map_sz, sizeof(u32), GFP_KERNEL); + mapp = int_map; + + list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { + for (pin = 1; pin <= OF_PCI_MAX_INT_PIN; pin++) { + *mapp = (child->bus->number << 16) | + (child->devfn << 8); + mapp += OF_PCI_ADDRESS_CELLS; + *mapp = pin; + mapp++; + i = pci_swizzle_interrupt_pin(child, pin) - 1; + *mapp = out_irq[i].np->phandle; + mapp++; + if (addr_sz[i]) { + ret = of_property_read_u32_array(out_irq[i].np, + "reg", mapp, + addr_sz[i]); + if (ret) + goto failed; + } + mapp += addr_sz[i]; + memcpy(mapp, out_irq[i].args, + out_irq[i].args_count * sizeof(u32)); + mapp += out_irq[i].args_count; + } + } + + ret = of_changeset_add_prop_u32_array(ocs, np, "interrupt-map", int_map, + map_sz); + if (ret) + goto failed; + + ret = of_changeset_add_prop_u32(ocs, np, "#interrupt-cells", 1); + if (ret) + goto failed; + + ret = of_changeset_add_prop_u32_array(ocs, np, "interrupt-map-mask", + int_map_mask, + ARRAY_SIZE(int_map_mask)); + if (ret) + goto failed; + + kfree(int_map); + return 0; + +failed: + kfree(int_map); + return ret; +} + +static int of_pci_prop_compatible(struct pci_dev *pdev, + struct of_changeset *ocs, + struct device_node *np) +{ + const char *compat_strs[PROP_COMPAT_NUM] = { 0 }; + int i, ret; + + compat_strs[PROP_COMPAT_PCI_VVVV_DDDD] = + kasprintf(GFP_KERNEL, "pci%x,%x", pdev->vendor, pdev->device); + compat_strs[PROP_COMPAT_PCICLASS_CCSSPP] = + kasprintf(GFP_KERNEL, "pciclass,%06x", pdev->class); + compat_strs[PROP_COMPAT_PCICLASS_CCSS] = + kasprintf(GFP_KERNEL, "pciclass,%04x", pdev->class >> 8); + + ret = of_changeset_add_prop_string_array(ocs, np, "compatible", + compat_strs, PROP_COMPAT_NUM); + for (i = 0; i < PROP_COMPAT_NUM; i++) + kfree(compat_strs[i]); + + return ret; +} + +int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs, + struct device_node *np) +{ + int ret; + + /* + * The added properties will be released when the + * changeset is destroyed. + */ + if (pci_is_bridge(pdev)) { + ret = of_changeset_add_prop_string(ocs, np, "device_type", + "pci"); + if (ret) + return ret; + + ret = of_pci_prop_bus_range(pdev, ocs, np); + if (ret) + return ret; + + ret = of_pci_prop_intr_map(pdev, ocs, np); + if (ret) + return ret; + } + + ret = of_pci_prop_ranges(pdev, ocs, np); + if (ret) + return ret; + + ret = of_changeset_add_prop_u32(ocs, np, "#address-cells", + OF_PCI_ADDRESS_CELLS); + if (ret) + return ret; + + ret = of_changeset_add_prop_u32(ocs, np, "#size-cells", + OF_PCI_SIZE_CELLS); + if (ret) + return ret; + + ret = of_pci_prop_reg(pdev, ocs, np); + if (ret) + return ret; + + ret = of_pci_prop_compatible(pdev, ocs, np); + if (ret) + return ret; + + ret = of_pci_prop_interrupts(pdev, ocs, np); + if (ret) + return ret; + + return 0; +} diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index a4c397434057..ba717bdd700d 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -679,6 +679,18 @@ static inline int devm_of_pci_bridge_init(struct device *dev, struct pci_host_br #endif /* CONFIG_OF */ +struct of_changeset; + +#ifdef CONFIG_PCI_DYNAMIC_OF_NODES +void of_pci_make_dev_node(struct pci_dev *pdev); +void of_pci_remove_node(struct pci_dev *pdev); +int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs, + struct device_node *np); +#else +static inline void of_pci_make_dev_node(struct pci_dev *pdev) { } +static inline void of_pci_remove_node(struct pci_dev *pdev) { } +#endif + #ifdef CONFIG_PCIEAER void pci_no_aer(void); void pci_aer_init(struct pci_dev *dev); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 321156ca273d..a8223ff52939 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -6138,3 +6138,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2d, dpc_log_size); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2f, dpc_log_size); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size); #endif + +/* + * For a PCI device with multiple downstream devices, its driver may use + * a flattened device tree to describe the downstream devices. + * To overlay the flattened device tree, the PCI device and all its ancestor + * devices need to have device tree nodes on system base device tree. Thus, + * before driver probing, it might need to add a device tree node as the final + * fixup. + */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node); diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index d68aee29386b..d749ea8250d6 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -22,6 +22,7 @@ static void pci_stop_dev(struct pci_dev *dev) device_release_driver(&dev->dev); pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); + of_pci_remove_node(dev); pci_dev_assign_added(dev, false); } diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h index 77997b35612c..b3f3b7cf9af8 100644 --- a/include/dt-bindings/ata/ahci.h +++ b/include/dt-bindings/ata/ahci.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause */ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ /* * This header provides constants for most AHCI bindings. */ diff --git a/include/dt-bindings/clock/hi3559av100-clock.h b/include/dt-bindings/clock/hi3559av100-clock.h index 5fe7689010a0..a4f0e997546c 100644 --- a/include/dt-bindings/clock/hi3559av100-clock.h +++ b/include/dt-bindings/clock/hi3559av100-clock.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later or BSD-2-Clause */ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause */ /* * Copyright (c) 2019-2020, Huawei Tech. Co., Ltd. * diff --git a/include/dt-bindings/clock/r8a779f0-cpg-mssr.h b/include/dt-bindings/clock/r8a779f0-cpg-mssr.h index f2ae1c6a82dd..c34be5624954 100644 --- a/include/dt-bindings/clock/r8a779f0-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a779f0-cpg-mssr.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/include/dt-bindings/clock/rockchip,rk3588-cru.h b/include/dt-bindings/clock/rockchip,rk3588-cru.h index b5616bca7b44..5790b1391201 100644 --- a/include/dt-bindings/clock/rockchip,rk3588-cru.h +++ b/include/dt-bindings/clock/rockchip,rk3588-cru.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Copyright (c) 2021 Rockchip Electronics Co. Ltd. * Copyright (c) 2022 Collabora Ltd. diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h index 25e8cfd43459..0a5324bcdbda 100644 --- a/include/dt-bindings/clock/stm32mp1-clks.h +++ b/include/dt-bindings/clock/stm32mp1-clks.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics. diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h index e143b9929763..fdbfb404f92a 100644 --- a/include/dt-bindings/clock/sun20i-d1-ccu.h +++ b/include/dt-bindings/clock/sun20i-d1-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2020 huangzhenwei@allwinnertech.com * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> diff --git a/include/dt-bindings/clock/sun20i-d1-r-ccu.h b/include/dt-bindings/clock/sun20i-d1-r-ccu.h index 4c2697fd32b0..f95c170711e5 100644 --- a/include/dt-bindings/clock/sun20i-d1-r-ccu.h +++ b/include/dt-bindings/clock/sun20i-d1-r-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> */ diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h index 28dc36e1a232..06a2031d466b 100644 --- a/include/dt-bindings/clock/sun50i-a100-ccu.h +++ b/include/dt-bindings/clock/sun50i-a100-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> */ diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h index a1545cd60e75..ef9123d81937 100644 --- a/include/dt-bindings/clock/sun50i-h6-ccu.h +++ b/include/dt-bindings/clock/sun50i-h6-ccu.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> */ diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h index 1191aca53ac6..6f8f01e67628 100644 --- a/include/dt-bindings/clock/sun50i-h616-ccu.h +++ b/include/dt-bindings/clock/sun50i-h616-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2020 Arm Ltd. */ diff --git a/include/dt-bindings/clock/sun6i-rtc.h b/include/dt-bindings/clock/sun6i-rtc.h index c845493e4d37..3bd3aa3d57ce 100644 --- a/include/dt-bindings/clock/sun6i-rtc.h +++ b/include/dt-bindings/clock/sun6i-rtc.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #ifndef _DT_BINDINGS_CLK_SUN6I_RTC_H_ #define _DT_BINDINGS_CLK_SUN6I_RTC_H_ diff --git a/include/dt-bindings/display/sdtv-standards.h b/include/dt-bindings/display/sdtv-standards.h index fbc1a3db2ea7..8249a2b47b79 100644 --- a/include/dt-bindings/display/sdtv-standards.h +++ b/include/dt-bindings/display/sdtv-standards.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only or X11 */ +/* SPDX-License-Identifier: GPL-2.0-only OR X11 */ /* * Copyright 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de> */ diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h index f7bd69350d18..fa7bb0bbf010 100644 --- a/include/dt-bindings/gpio/meson-g12a-gpio.h +++ b/include/dt-bindings/gpio/meson-g12a-gpio.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2018 Amlogic, Inc. All rights reserved. * Author: Xingyu Chen <xingyu.chen@amlogic.com> diff --git a/include/dt-bindings/power/meson-a1-power.h b/include/dt-bindings/power/meson-a1-power.h index 6cf50bfb8ccf..724c370d6853 100644 --- a/include/dt-bindings/power/meson-a1-power.h +++ b/include/dt-bindings/power/meson-a1-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2019 Amlogic, Inc. * Author: Jianxin Pan <jianxin.pan@amlogic.com> diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h index e5243884b249..ace0e468ce21 100644 --- a/include/dt-bindings/power/meson-axg-power.h +++ b/include/dt-bindings/power/meson-axg-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2020 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> diff --git a/include/dt-bindings/power/meson-g12a-power.h b/include/dt-bindings/power/meson-g12a-power.h index 93b03bdd60b7..44ec0c50e340 100644 --- a/include/dt-bindings/power/meson-g12a-power.h +++ b/include/dt-bindings/power/meson-g12a-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2019 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> diff --git a/include/dt-bindings/power/meson-gxbb-power.h b/include/dt-bindings/power/meson-gxbb-power.h index 1262dac696c0..8d0b32b6c02c 100644 --- a/include/dt-bindings/power/meson-gxbb-power.h +++ b/include/dt-bindings/power/meson-gxbb-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2019 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> diff --git a/include/dt-bindings/power/meson-s4-power.h b/include/dt-bindings/power/meson-s4-power.h index 462dd2cb938b..f210a524a592 100644 --- a/include/dt-bindings/power/meson-s4-power.h +++ b/include/dt-bindings/power/meson-s4-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2021 Amlogic, Inc. * Author: Shunzhou Jiang <shunzhou.jiang@amlogic.com> diff --git a/include/dt-bindings/power/meson-sm1-power.h b/include/dt-bindings/power/meson-sm1-power.h index a020ab00c134..d78e710dbfff 100644 --- a/include/dt-bindings/power/meson-sm1-power.h +++ b/include/dt-bindings/power/meson-sm1-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2019 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> diff --git a/include/dt-bindings/power/meson8-power.h b/include/dt-bindings/power/meson8-power.h index dd8b2ddb82a7..7a55ba2cd22e 100644 --- a/include/dt-bindings/power/meson8-power.h +++ b/include/dt-bindings/power/meson8-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */ diff --git a/include/dt-bindings/power/r8a779f0-sysc.h b/include/dt-bindings/power/r8a779f0-sysc.h index 0ec8ad727ed9..cde1536e9ed0 100644 --- a/include/dt-bindings/power/r8a779f0-sysc.h +++ b/include/dt-bindings/power/r8a779f0-sysc.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/include/dt-bindings/power/rk3588-power.h b/include/dt-bindings/power/rk3588-power.h index 1b92fec013cb..6b91a50cc6d6 100644 --- a/include/dt-bindings/power/rk3588-power.h +++ b/include/dt-bindings/power/rk3588-power.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ #ifndef __DT_BINDINGS_POWER_RK3588_POWER_H__ #define __DT_BINDINGS_POWER_RK3588_POWER_H__ diff --git a/include/dt-bindings/power/summit,smb347-charger.h b/include/dt-bindings/power/summit,smb347-charger.h index 3205699b5e41..14f2f9cf2020 100644 --- a/include/dt-bindings/power/summit,smb347-charger.h +++ b/include/dt-bindings/power/summit,smb347-charger.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0-or-later or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */ /* * Author: David Heidelberg <david@ixit.cz> */ diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h index 738e56aead93..d4264db2a07f 100644 --- a/include/dt-bindings/reset/rockchip,rk3588-cru.h +++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Copyright (c) 2021 Rockchip Electronics Co. Ltd. * Copyright (c) 2022 Collabora Ltd. diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h index 4ffa7c3612e6..9071f139649f 100644 --- a/include/dt-bindings/reset/stm32mp1-resets.h +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics. diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h index f8001cf50bf1..79e52aca5912 100644 --- a/include/dt-bindings/reset/sun20i-d1-ccu.h +++ b/include/dt-bindings/reset/sun20i-d1-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2020 huangzhenwei@allwinnertech.com * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> diff --git a/include/dt-bindings/reset/sun20i-d1-r-ccu.h b/include/dt-bindings/reset/sun20i-d1-r-ccu.h index d93d6423d283..e20babc990af 100644 --- a/include/dt-bindings/reset/sun20i-d1-r-ccu.h +++ b/include/dt-bindings/reset/sun20i-d1-r-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> */ diff --git a/include/dt-bindings/reset/sun50i-a100-ccu.h b/include/dt-bindings/reset/sun50i-a100-ccu.h index 55c0ada99885..d13764bc1860 100644 --- a/include/dt-bindings/reset/sun50i-a100-ccu.h +++ b/include/dt-bindings/reset/sun50i-a100-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> */ diff --git a/include/dt-bindings/reset/sun50i-a100-r-ccu.h b/include/dt-bindings/reset/sun50i-a100-r-ccu.h index 737bf6f66626..1e7c4431f03c 100644 --- a/include/dt-bindings/reset/sun50i-a100-r-ccu.h +++ b/include/dt-bindings/reset/sun50i-a100-r-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> */ diff --git a/include/dt-bindings/reset/sun50i-h6-ccu.h b/include/dt-bindings/reset/sun50i-h6-ccu.h index 81106f455097..d038ddfa4818 100644 --- a/include/dt-bindings/reset/sun50i-h6-ccu.h +++ b/include/dt-bindings/reset/sun50i-h6-ccu.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> */ diff --git a/include/dt-bindings/reset/sun50i-h6-r-ccu.h b/include/dt-bindings/reset/sun50i-h6-r-ccu.h index 7950e799c76d..d541ade884fc 100644 --- a/include/dt-bindings/reset/sun50i-h6-r-ccu.h +++ b/include/dt-bindings/reset/sun50i-h6-r-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> */ diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h index cb6285a8d128..1bd8bb0a11be 100644 --- a/include/dt-bindings/reset/sun50i-h616-ccu.h +++ b/include/dt-bindings/reset/sun50i-h616-ccu.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2020 Arm Ltd. */ diff --git a/include/linux/of.h b/include/linux/of.h index 6ecde0515677..ed679819c279 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -96,10 +96,12 @@ struct of_reconfig_data { struct property *old_prop; }; +extern const struct kobj_type of_node_ktype; +extern const struct fwnode_operations of_fwnode_ops; + /** * of_node_init - initialize a devicetree node * @node: Pointer to device node that has been created by kzalloc() - * @phandle_name: Name of property holding a phandle value * * On return the device_node refcount is set to one. Use of_node_put() * on @node when done to free the memory allocated for it. If the node @@ -107,9 +109,6 @@ struct of_reconfig_data { * whether to free the memory will be done by node->release(), which is * of_node_release(). */ -/* initialize a node */ -extern const struct kobj_type of_node_ktype; -extern const struct fwnode_operations of_fwnode_ops; static inline void of_node_init(struct device_node *node) { #if defined(CONFIG_OF_KOBJ) @@ -1580,6 +1579,29 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, { return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop); } + +struct device_node *of_changeset_create_node(struct of_changeset *ocs, + struct device_node *parent, + const char *full_name); +int of_changeset_add_prop_string(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, const char *str); +int of_changeset_add_prop_string_array(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, + const char **str_array, size_t sz); +int of_changeset_add_prop_u32_array(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, + const u32 *array, size_t sz); +static inline int of_changeset_add_prop_u32(struct of_changeset *ocs, + struct device_node *np, + const char *prop_name, + const u32 val) +{ + return of_changeset_add_prop_u32_array(ocs, np, prop_name, &val, 1); +} + #else /* CONFIG_OF_DYNAMIC */ static inline int of_reconfig_notifier_register(struct notifier_block *nb) { @@ -1645,7 +1667,7 @@ struct of_overlay_notify_data { #ifdef CONFIG_OF_OVERLAY int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, - int *ovcs_id); + int *ovcs_id, struct device_node *target_base); int of_overlay_remove(int *ovcs_id); int of_overlay_remove_all(void); diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index d8045bcfc35e..fadfea575485 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -127,10 +127,4 @@ static inline int devm_of_platform_populate(struct device *dev) static inline void devm_of_platform_depopulate(struct device *dev) { } #endif -#if defined(CONFIG_OF_DYNAMIC) && defined(CONFIG_OF_ADDRESS) -extern void of_platform_register_reconfig_notifier(void); -#else -static inline void of_platform_register_reconfig_notifier(void) { } -#endif - #endif /* _LINUX_OF_PLATFORM_H */ diff --git a/scripts/dtc/dt-extract-compatibles b/scripts/dtc/dt-extract-compatibles index a1119762ed08..9df9f1face83 100755 --- a/scripts/dtc/dt-extract-compatibles +++ b/scripts/dtc/dt-extract-compatibles @@ -25,8 +25,8 @@ def parse_of_declare_macros(data): def parse_of_device_id(data): """ Find all compatible strings in of_device_id structs """ compat_list = [] - for m in re.finditer(r'of_device_id\s+[a-zA-Z0-9_]+\[\]\s*=\s*({.*?);', data): - compat_list += re.findall(r'\.compatible\s+=\s+"([a-zA-Z0-9_\-,]+)"', m[1]) + for m in re.finditer(r'of_device_id(\s+\S+)?\s+\S+\[\](\s+\S+)?\s*=\s*({.*?);', data): + compat_list += re.findall(r'\.compatible\s+=\s+"(\S+)"', m[3]) return compat_list |