diff options
86 files changed, 1725 insertions, 846 deletions
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt deleted file mode 100644 index 4860eabd0f72..000000000000 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ /dev/null @@ -1,76 +0,0 @@ -ChromeOS Embedded Controller - -Google's ChromeOS EC is a Cortex-M device which talks to the AP and -implements various function such as keyboard and battery charging. - -The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the -compatible string used depends on the interface. Each connection method has -its own driver which connects to the top level interface-agnostic EC driver. -Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to -the top-level driver. - -Required properties (I2C): -- compatible: "google,cros-ec-i2c" -- reg: I2C slave address - -Required properties (SPI): -- compatible: "google,cros-ec-spi" -- reg: SPI chip select - -Required properties (RPMSG): -- compatible: "google,cros-ec-rpmsg" - -Optional properties (SPI): -- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little - time to wake up from sleep before they can receive SPI transfers at a high - clock rate. This property specifies the delay, in usecs, between the - assertion of the CS to the start of the first clock pulse. -- google,cros-ec-spi-msg-delay: Some implementations of the EC require some - additional processing time in order to accept new transactions. If the delay - between transactions is not long enough the EC may not be able to respond - properly to subsequent transactions and cause them to hang. This property - specifies the delay, in usecs, introduced between transactions to account - for the time required by the EC to get back into a state in which new data - can be accepted. - -Required properties (LPC): -- compatible: "google,cros-ec-lpc" -- reg: List of (IO address, size) pairs defining the interface uses - -Optional properties (all): -- google,has-vbc-nvram: Some implementations of the EC include a small - nvram space used to store verified boot context data. This boolean flag - is used to specify whether this nvram is present or not. - -Example for I2C: - -i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec-i2c"; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - }; - - -Example for SPI: - -spi@131b0000 { - ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0x0>; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - spi-max-frequency = <5000000>; - controller-data { - cs-gpio = <&gpf0 3 4 3 0>; - samsung,spi-cs; - samsung,spi-feedback-delay = <2>; - }; - }; -}; - - -Example for LPC is not supplied as it is not yet implemented. diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 487a8445722e..ceec33f6aba1 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -79,11 +79,12 @@ properties: description: | conversion mode: 0 - temperature, in C*10 - 1 - pre-scaled voltage value + 1 - pre-scaled 24-bit voltage value 2 - scaled voltage based on an optional resistor divider and optional offset + 3 - pre-scaled 16-bit voltage value $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2] + enum: [0, 1, 2, 3] gw,voltage-divider-ohms: description: Values of resistors for divider on raw ADC input diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml new file mode 100644 index 000000000000..6a7279a85ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + - Guenter Roeck <groeck@chromium.org> + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC is connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC is connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the EC is connected through RPMSG. + const: google,cros-ec-rpmsg + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + spi-max-frequency: + description: Maximum SPI frequency of the device in Hz. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + +if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg +then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + +additionalProperties: false + +examples: + # Example for I2C + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml new file mode 100644 index 000000000000..a3b976f101e8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Khadas on-board Microcontroller Device Tree Bindings + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + Khadas embeds a microcontroller on their VIM and Edge boards adding some + system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory + storage, IR/Key resume control, system power LED control and more. + +properties: + compatible: + enum: + - khadas,mcu # MCU revision is discoverable + + "#cooling-cells": # Only needed for boards having FAN control feature + const: 2 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index e675611f80d0..8bcea8dd7d90 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -33,6 +33,9 @@ properties: items: - const: mux + interrupts: + maxItems: 1 + "#address-cells": const: 1 @@ -106,11 +109,13 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@40002400 { compatible = "st,stm32-lptimer"; reg = <0x40002400 0x400>; clocks = <&timer_clk>; clock-names = "mux"; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml new file mode 100644 index 000000000000..888ab4b5df45 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: + maxItems: 1 + + pinctrl: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z]*-pins$": + type: object + + allOf: + - $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + additionalProperties: false + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt deleted file mode 100644 index f0c2f7fcf5c7..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmfx.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectonics Multi-Function eXpander (STMFX) Core bindings - -ST Multi-Function eXpander (STMFX) is a slave controller using I2C for -communication with the main MCU. Its main features are GPIO expansion, main -MCU IDD measurement (IDD is the amount of current that flows through VDD) and -resistive touchscreen controller. - -Required properties: -- compatible: should be "st,stmfx-0300". -- reg: I2C slave address of the device. -- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. - Please refer to ../interrupt-controller/interrupt.txt - -Optional properties: -- drive-open-drain: configure MFX_IRQ_OUT as open drain. -- vdd-supply: phandle of the regulator supplying STMFX. - -Example: - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - vdd-supply = <&v3v3>; - }; - -Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt index 56f244b5d8a4..c2f9302965de 100644 --- a/Documentation/devicetree/bindings/mfd/twl-family.txt +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt @@ -26,7 +26,7 @@ Optional node: Example: /* * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/twl6030.pdf + * https://www.ti.com/lit/ds/symlink/twl6030.pdf */ twl@48 { compatible = "ti,twl6030"; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt deleted file mode 100644 index c1b4c1819b84..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt +++ /dev/null @@ -1,116 +0,0 @@ -STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings - -ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. -Please refer to ../mfd/stmfx.txt for STMFX Core bindings. - -Required properties: -- compatible: should be "st,stmfx-0300-pinctrl". -- #gpio-cells: should be <2>, the first cell is the GPIO number and the second - cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>. -- gpio-controller: marks the device as a GPIO controller. -- #interrupt-cells: should be <2>, the first cell is the GPIO number and the - second cell is the interrupt flags in accordance with - <dt-bindings/interrupt-controller/irq.h>. -- interrupt-controller: marks the device as an interrupt controller. -- gpio-ranges: specifies the mapping between gpio controller and pin - controller pins. Check "Concerning gpio-ranges property" below. -Please refer to ../gpio/gpio.txt. - -Please refer to pinctrl-bindings.txt for pin configuration. - -Required properties for pin configuration sub-nodes: -- pins: list of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes (pinconf-generic ones): -- bias-disable: disable any bias on the pin. -- bias-pull-up: the pin will be pulled up. -- bias-pull-pin-default: use the pin-default pull state. -- bias-pull-down: the pin will be pulled down. -- drive-open-drain: the pin will be driven with open drain. -- drive-push-pull: the pin will be driven actively high and low. -- output-high: the pin will be configured as an output driving high level. -- output-low: the pin will be configured as an output driving low level. - -Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are -called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". - -Concerning gpio-ranges property: -- if all STMFX pins[24:0] are available (no other STMFX function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; -- if agpio[3:0] are not available (STMFX Touchscreen function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; -- if agpio[7:4] are not available (STMFX IDD function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; - - -Example: - - stmfx: stmfx@42 { - ... - - stmfx_pinctrl: stmfx-pin-controller { - compatible = "st,stmfx-0300-pinctrl"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; - -Example of STMFX GPIO consumers: - - joystick { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = <KEY_ENTER>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - button-1 { - label = "JoyDown"; - linux,code = <KEY_DOWN>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = <KEY_LEFT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - }; - button-3 { - label = "JoyRight"; - linux,code = <KEY_RIGHT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - button-4 { - label = "JoyUp"; - linux,code = <KEY_UP>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - }; - }; - - leds { - compatible = "gpio-leds"; - orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - - blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - } diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 902b93b17235..5ef2cfe3a16b 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -100,7 +100,6 @@ available subsections can be seen below. rfkill serial/index sm501 - smsc_ece1099 switchtec sync_file vfio-mediated-device diff --git a/Documentation/driver-api/smsc_ece1099.rst b/Documentation/driver-api/smsc_ece1099.rst deleted file mode 100644 index 079277421eaf..000000000000 --- a/Documentation/driver-api/smsc_ece1099.rst +++ /dev/null @@ -1,60 +0,0 @@ -================================================= -Msc Keyboard Scan Expansion/GPIO Expansion device -================================================= - -What is smsc-ece1099? ----------------------- - -The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion -or GPIO Expansion device. The device supports a keyboard -scan matrix of 23x8. The device is connected to a Master -via the SMSC BC-Link interface or via the SMBus. -Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals -are multiplexed with GPIOs. - -Interrupt generation --------------------- - -Interrupts can be generated by an edge detection on a GPIO -pin or an edge detection on one of the bus interface pins. -Interrupts can also be detected on the keyboard scan interface. -The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if -any bit in one of the Interrupt Status registers is 1 and -the corresponding Interrupt Mask bit is also 1. - -In order for software to determine which device is the source -of an interrupt, it should first read the Group Interrupt Status Register -to determine which Status register group is a source for the interrupt. -Software should read both the Status register and the associated Mask register, -then AND the two values together. Bits that are 1 in the result of the AND -are active interrupts. Software clears an interrupt by writing a 1 to the -corresponding bit in the Status register. - -Communication Protocol ----------------------- - -- SMbus slave Interface - The host processor communicates with the ECE1099 device - through a series of read/write registers via the SMBus - interface. SMBus is a serial communication protocol between - a computer host and its peripheral devices. The SMBus data - rate is 10KHz minimum to 400 KHz maximum - -- Slave Bus Interface - The ECE1099 device SMBus implementation is a subset of the - SMBus interface to the host. The device is a slave-only SMBus device. - The implementation in the device is a subset of SMBus since it - only supports four protocols. - - The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the - only valid SMBus protocols for the device. - -- BC-LinkTM Interface - The BC-Link is a proprietary bus that allows communication - between a Master device and a Companion device. The Master - device uses this serial bus to read and write registers - located on the Companion device. The bus comprises three signals, - BC_CLK, BC_DAT and BC_INT#. The Master device always provides the - clock, BC_CLK, and the Companion device is the source for an - independent asynchronous interrupt signal, BC_INT#. The ECE1099 - supports BC-Link speeds up to 24MHz. diff --git a/MAINTAINERS b/MAINTAINERS index 2843effadff8..b0a742ce8f2c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9678,6 +9678,15 @@ F: include/linux/kdb.h F: include/linux/kgdb.h F: kernel/debug/ +KHADAS MCU MFD DRIVER +M: Neil Armstrong <narmstrong@baylibre.com> +L: linux-amlogic@lists.infradead.org +S: Maintained +F: Documentation/devicetree/bindings/mfd/khadas,mcu.yaml +F: drivers/mfd/khadas-mcu.c +F: include/linux/mfd/khadas-mcu.h +F: drivers/thermal/khadas_mcu_fan.c + KMEMLEAK M: Catalin Marinas <catalin.marinas@arm.com> S: Maintained @@ -14887,6 +14896,13 @@ L: linux-serial@vger.kernel.org S: Odd Fixes F: drivers/tty/serial/rp2.* +ROHM BD99954 CHARGER IC +R: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> +L: linux-power@fi.rohmeurope.com +S: Supported +F: drivers/power/supply/bd99954-charger.c +F: drivers/power/supply/bd99954-charger.h + ROHM BH1750 AMBIENT LIGHT SENSOR DRIVER M: Tomasz Duszynski <tduszyns@gmail.com> S: Maintained @@ -14904,6 +14920,31 @@ F: drivers/mfd/bd9571mwv.c F: drivers/regulator/bd9571mwv-regulator.c F: include/linux/mfd/bd9571mwv.h +ROHM POWER MANAGEMENT IC DEVICE DRIVERS +R: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> +L: linux-power@fi.rohmeurope.com +S: Supported +F: Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt +F: Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt +F: drivers/clk/clk-bd718x7.c +F: drivers/gpio/gpio-bd70528.c +F: drivers/gpio/gpio-bd71828.c +F: drivers/mfd/rohm-bd70528.c +F: drivers/mfd/rohm-bd71828.c +F: drivers/mfd/rohm-bd718x7.c +F: drivers/power/supply/bd70528-charger.c +F: drivers/regulator/bd70528-regulator.c +F: drivers/regulator/bd71828-regulator.c +F: drivers/regulator/bd718x7-regulator.c +F: drivers/regulator/rohm-regulator.c +F: drivers/rtc/rtc-bd70528.c +F: drivers/watchdog/bd70528_wdt.c +F: include/linux/mfd/rohm-bd70528.h +F: include/linux/mfd/rohm-bd71828.h +F: include/linux/mfd/rohm-bd718x7.h +F: include/linux/mfd/rohm-generic.h +F: include/linux/mfd/rohm-shared.h + ROSE NETWORK LAYER M: Ralf Baechle <ralf@linux-mips.org> L: linux-hams@vger.kernel.org diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 2ed8b4361d95..3576ad7bd380 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -291,6 +291,10 @@ config CLKSRC_STM32 select CLKSRC_MMIO select TIMER_OF +config CLKSRC_STM32_LP + bool "Low power clocksource for STM32 SoCs" + depends on MFD_STM32_LPTIMER || COMPILE_TEST + config CLKSRC_MPS2 bool "Clocksource for MPS2 SoCs" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 3994e221e262..eaedb7240ae7 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += timer-cadence-ttc.o obj-$(CONFIG_CLKSRC_EFM32) += timer-efm32.o obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o +obj-$(CONFIG_CLKSRC_STM32_LP) += timer-stm32-lp.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_LPC32XX) += timer-lpc32xx.o obj-$(CONFIG_CLKSRC_MPS2) += mps2-timer.o diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c new file mode 100644 index 000000000000..db2841d0beb8 --- /dev/null +++ b/drivers/clocksource/timer-stm32-lp.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/mfd/stm32-lptimer.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> + +#define CFGR_PSC_OFFSET 9 +#define STM32_LP_RATING 1000 +#define STM32_TARGET_CLKRATE (32000 * HZ) +#define STM32_LP_MAX_PSC 7 + +struct stm32_lp_private { + struct regmap *reg; + struct clock_event_device clkevt; + unsigned long period; + struct device *dev; +}; + +static struct stm32_lp_private* +to_priv(struct clock_event_device *clkevt) +{ + return container_of(clkevt, struct stm32_lp_private, clkevt); +} + +static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + regmap_write(priv->reg, STM32_LPTIM_CR, 0); + regmap_write(priv->reg, STM32_LPTIM_IER, 0); + /* clear pending flags */ + regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF); + + return 0; +} + +static int stm32_clkevent_lp_set_timer(unsigned long evt, + struct clock_event_device *clkevt, + int is_periodic) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + /* disable LPTIMER to be able to write into IER register*/ + regmap_write(priv->reg, STM32_LPTIM_CR, 0); + /* enable ARR interrupt */ + regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE); + /* enable LPTIMER to be able to write into ARR register */ + regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE); + /* set next event counter */ + regmap_write(priv->reg, STM32_LPTIM_ARR, evt); + + /* start counter */ + if (is_periodic) + regmap_write(priv->reg, STM32_LPTIM_CR, + STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE); + else + regmap_write(priv->reg, STM32_LPTIM_CR, + STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE); + + return 0; +} + +static int stm32_clkevent_lp_set_next_event(unsigned long evt, + struct clock_event_device *clkevt) +{ + return stm32_clkevent_lp_set_timer(evt, clkevt, + clockevent_state_periodic(clkevt)); +} + +static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + return stm32_clkevent_lp_set_timer(priv->period, clkevt, true); +} + +static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + return stm32_clkevent_lp_set_timer(priv->period, clkevt, false); +} + +static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id) +{ + struct clock_event_device *clkevt = (struct clock_event_device *)dev_id; + struct stm32_lp_private *priv = to_priv(clkevt); + + regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF); + + if (clkevt->event_handler) + clkevt->event_handler(clkevt); + + return IRQ_HANDLED; +} + +static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv, + unsigned long *rate) +{ + int i; + + for (i = 0; i <= STM32_LP_MAX_PSC; i++) { + if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE) + break; + } + + regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET); + + /* Adjust rate and period given the prescaler value */ + *rate = DIV_ROUND_CLOSEST(*rate, (1 << i)); + priv->period = DIV_ROUND_UP(*rate, HZ); +} + +static void stm32_clkevent_lp_init(struct stm32_lp_private *priv, + struct device_node *np, unsigned long rate) +{ + priv->clkevt.name = np->full_name; + priv->clkevt.cpumask = cpu_possible_mask; + priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown; + priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic; + priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot; + priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event; + priv->clkevt.rating = STM32_LP_RATING; + + clockevents_config_and_register(&priv->clkevt, rate, 0x1, + STM32_LPTIM_MAX_ARR); +} + +static int stm32_clkevent_lp_probe(struct platform_device *pdev) +{ + struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent); + struct stm32_lp_private *priv; + unsigned long rate; + int ret, irq; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reg = ddata->regmap; + ret = clk_prepare_enable(ddata->clk); + if (ret) + return -EINVAL; + + rate = clk_get_rate(ddata->clk); + if (!rate) { + ret = -EINVAL; + goto out_clk_disable; + } + + irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0); + if (irq <= 0) { + ret = irq; + goto out_clk_disable; + } + + if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) { + ret = device_init_wakeup(&pdev->dev, true); + if (ret) + goto out_clk_disable; + + ret = dev_pm_set_wake_irq(&pdev->dev, irq); + if (ret) + goto out_clk_disable; + } + + ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler, + IRQF_TIMER, pdev->name, &priv->clkevt); + if (ret) + goto out_clk_disable; + + stm32_clkevent_lp_set_prescaler(priv, &rate); + + stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate); + + priv->dev = &pdev->dev; + + return 0; + +out_clk_disable: + clk_disable_unprepare(ddata->clk); + return ret; +} + +static int stm32_clkevent_lp_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent */ +} + +static const struct of_device_id stm32_clkevent_lp_of_match[] = { + { .compatible = "st,stm32-lptimer-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match); + +static struct platform_driver stm32_clkevent_lp_driver = { + .probe = stm32_clkevent_lp_probe, + .remove = stm32_clkevent_lp_remove, + .driver = { + .name = "stm32-lptimer-timer", + .of_match_table = of_match_ptr(stm32_clkevent_lp_of_match), + }, +}; +module_platform_driver(stm32_clkevent_lp_driver); + +MODULE_ALIAS("platform:stm32-lptimer-timer"); +MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a37d7d171382..33df0837ab41 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1193,18 +1193,6 @@ config MFD_SKY81452 This driver can also be built as a module. If so, the module will be called sky81452. -config MFD_SMSC - bool "SMSC ECE1099 series chips" - depends on I2C=y - select MFD_CORE - select REGMAP_I2C - help - If you say yes here you get support for the - ece1099 chips from SMSC. - - To compile this driver as a module, choose M here: the - module will be called smsc. - config MFD_SC27XX_PMIC tristate "Spreadtrum SC27xx PMICs" depends on ARCH_SPRD || COMPILE_TEST @@ -2053,6 +2041,27 @@ config MFD_WCD934X This driver provides common support WCD934x audio codec and its associated Pin Controller, Soundwire Controller and Audio codec. +config MFD_KHADAS_MCU + tristate "Support for Khadas System control Microcontroller" + depends on I2C + depends on ARCH_MESON || ARCH_ROCKCHIP || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Support for the Khadas System control Microcontroller interface + present on their VIM and Edge boards. + + This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and + Edge boards. + + It provides multiple boot control features like password check, + power-on options, power-off control and system FAN control on recent + boards. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9367a92f795a..a60e5f835283 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -127,7 +127,6 @@ obj-$(CONFIG_MFD_CPCAP) += motorola-cpcap.o obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o -obj-$(CONFIG_MFD_SMSC) += smsc-ece1099.o obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o ifeq ($(CONFIG_SA1100_ASSABET),y) @@ -262,5 +261,6 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_STMFX) += stmfx.o +obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 57723f116bb5..ee71ae04b5e6 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -498,7 +498,7 @@ static ssize_t ab3100_get_set_reg(struct file *file, int i = 0; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); + buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c index c4751fb9bc22..c393102e3a39 100644 --- a/drivers/mfd/ab3100-otp.c +++ b/drivers/mfd/ab3100-otp.c @@ -29,22 +29,22 @@ /** * struct ab3100_otp - * @dev containing device - * @locked whether the OTP is locked, after locking, no more bits + * @dev: containing device + * @locked: whether the OTP is locked, after locking, no more bits * can be changed but before locking it is still possible * to change bits from 1->0. - * @freq clocking frequency for the OTP, this frequency is either + * @freq: clocking frequency for the OTP, this frequency is either * 32768Hz or 1MHz/30 - * @paf product activation flag, indicates whether this is a real + * @paf: product activation flag, indicates whether this is a real * product (paf true) or a lab board etc (paf false) - * @imeich if this is set it is possible to override the + * @imeich: if this is set it is possible to override the * IMEI number found in the tac, fac and svn fields with * (secured) software - * @cid customer ID - * @tac type allocation code of the IMEI - * @fac final assembly code of the IMEI - * @svn software version number of the IMEI - * @debugfs a debugfs file used when dumping to file + * @cid: customer ID + * @tac: type allocation code of the IMEI + * @fac: final assembly code of the IMEI + * @svn: software version number of the IMEI + * @debugfs: a debugfs file used when dumping to file */ struct ab3100_otp { struct device *dev; diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 1a9a3414d4fa..6d1bf7c3ca3b 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1801,7 +1801,7 @@ static ssize_t ab8500_hwreg_write(struct file *file, int buf_size, ret; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); + buf_size = min((int)count, (int)(sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c index d2a13a547a3c..41076d121dd5 100644 --- a/drivers/mfd/altera-sysmgr.c +++ b/drivers/mfd/altera-sysmgr.c @@ -22,11 +22,9 @@ /** * struct altr_sysmgr - Altera SOCFPGA System Manager * @regmap: the regmap used for System Manager accesses. - * @base : the base address for the System Manager */ struct altr_sysmgr { struct regmap *regmap; - resource_size_t *base; }; static struct platform_driver altr_sysmgr_driver; @@ -91,6 +89,9 @@ static struct regmap_config altr_sysmgr_regmap_cfg = { * altr_sysmgr_regmap_lookup_by_phandle * Find the sysmgr previous configured in probe() and return regmap property. * Return: regmap if found or error if not found. + * + * @np: Pointer to device's Device Tree node + * @property: Device Tree property name which references the sysmgr */ struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, const char *property) @@ -127,6 +128,7 @@ static int sysmgr_probe(struct platform_device *pdev) struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; + void __iomem *base; sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL); if (!sysmgr) @@ -139,22 +141,19 @@ static int sysmgr_probe(struct platform_device *pdev) sysmgr_config.max_register = resource_size(res) - sysmgr_config.reg_stride; if (of_device_is_compatible(np, "altr,sys-mgr-s10")) { - /* Need physical address for SMCC call */ - sysmgr->base = (resource_size_t *)res->start; sysmgr_config.reg_read = s10_protected_reg_read; sysmgr_config.reg_write = s10_protected_reg_write; - regmap = devm_regmap_init(dev, NULL, sysmgr->base, + /* Need physical address for SMCC call */ + regmap = devm_regmap_init(dev, NULL, (void *)res->start, &sysmgr_config); } else { - sysmgr->base = devm_ioremap(dev, res->start, - resource_size(res)); - if (!sysmgr->base) + base = devm_ioremap(dev, res->start, resource_size(res)); + if (!base) return -ENOMEM; sysmgr_config.max_register = res->end - res->start - 3; - regmap = devm_regmap_init_mmio(dev, sysmgr->base, - &sysmgr_config); + regmap = devm_regmap_init_mmio(dev, base, &sysmgr_config); } if (IS_ERR(regmap)) { diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index f73cf76d1373..000cb82023e3 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -80,7 +80,7 @@ int arizona_clk32k_disable(struct arizona *arizona) { mutex_lock(&arizona->clk_lock); - BUG_ON(arizona->clk32k_ref <= 0); + WARN_ON(arizona->clk32k_ref <= 0); arizona->clk32k_ref--; @@ -1426,6 +1426,15 @@ err_irq: arizona_irq_exit(arizona); err_pm: pm_runtime_disable(arizona->dev); + + switch (arizona->pdata.clk32k_src) { + case ARIZONA_32KZ_MCLK1: + case ARIZONA_32KZ_MCLK2: + arizona_clk32k_disable(arizona); + break; + default: + break; + } err_reset: arizona_enable_reset(arizona); regulator_disable(arizona->dcvdd); @@ -1448,6 +1457,15 @@ int arizona_dev_exit(struct arizona *arizona) regulator_disable(arizona->dcvdd); regulator_put(arizona->dcvdd); + switch (arizona->pdata.clk32k_src) { + case ARIZONA_32KZ_MCLK1: + case ARIZONA_32KZ_MCLK2: + arizona_clk32k_disable(arizona); + break; + default: + break; + } + mfd_remove_devices(arizona->dev); arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona); arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona); diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index 1fa2ec950e7d..d96f1d689e7f 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -237,7 +237,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); * atmel_smc_cs_conf_apply - apply an SMC CS conf * @regmap: the SMC regmap * @cs: the CS id - * @conf the SMC CS conf to apply + * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on at91sam9/avr32 SoCs. @@ -257,7 +257,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); * @regmap: the HSMC regmap * @cs: the CS id * @layout: the layout of registers - * @conf the SMC CS conf to apply + * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on post-sama5 SoCs. diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index 14f9df74f855..068e9c083f13 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -63,6 +63,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, + { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, { }, }; @@ -74,11 +75,13 @@ static const struct i2c_device_id axp20x_i2c_id[] = { { "axp209", 0 }, { "axp221", 0 }, { "axp223", 0 }, + { "axp803", 0 }, { "axp806", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); +#ifdef CONFIG_ACPI static const struct acpi_device_id axp20x_i2c_acpi_match[] = { { .id = "INT33F4", @@ -87,6 +90,7 @@ static const struct acpi_device_id axp20x_i2c_acpi_match[] = { { }, }; MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match); +#endif static struct i2c_driver axp20x_i2c_driver = { .driver = { diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index 32c2b912b58b..d07b43d7c761 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -24,7 +24,7 @@ static struct class cros_class = { }; /** - * cros_feature_to_name - CrOS feature id to name/short description. + * struct cros_feature_to_name - CrOS feature id to name/short description. * @id: The feature identifier. * @name: Device name associated with the feature id. * @desc: Short name that will be displayed. @@ -36,7 +36,7 @@ struct cros_feature_to_name { }; /** - * cros_feature_to_cells - CrOS feature id to mfd cells association. + * struct cros_feature_to_cells - CrOS feature id to mfd cells association. * @id: The feature identifier. * @mfd_cells: Pointer to the array of mfd cells that needs to be added. * @num_cells: Number of mfd cells into the array. diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index b125f90dd375..a353d52210a9 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -160,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063) int da9063_device_init(struct da9063 *da9063, unsigned int irq) { - int model, variant_id, variant_code; int ret; ret = da9063_clear_fault_log(da9063); @@ -171,36 +170,6 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) da9063->irq_base = -1; da9063->chip_irq = irq; - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model); - if (ret < 0) { - dev_err(da9063->dev, "Cannot read chip model id.\n"); - return -EIO; - } - if (model != PMIC_CHIP_ID_DA9063) { - dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model); - return -ENODEV; - } - - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id); - if (ret < 0) { - dev_err(da9063->dev, "Cannot read chip variant id.\n"); - return -EIO; - } - - variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT; - - dev_info(da9063->dev, - "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", - model, variant_id); - - if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) { - dev_err(da9063->dev, - "Cannot support variant code: 0x%02X\n", variant_code); - return -ENODEV; - } - - da9063->variant_code = variant_code; - ret = da9063_irq_init(da9063); if (ret) { dev_err(da9063->dev, "Cannot initialize interrupts.\n"); diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 455de74c0dd2..b8217ad303ce 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -22,12 +22,124 @@ #include <linux/of.h> #include <linux/regulator/of_regulator.h> +/* + * Raw I2C access required for just accessing chip and variant info before we + * know which device is present. The info read from the device using this + * approach is then used to select the correct regmap tables. + */ + +#define DA9063_REG_PAGE_SIZE 0x100 +#define DA9063_REG_PAGED_ADDR_MASK 0xFF + +enum da9063_page_sel_buf_fmt { + DA9063_PAGE_SEL_BUF_PAGE_REG = 0, + DA9063_PAGE_SEL_BUF_PAGE_VAL, + DA9063_PAGE_SEL_BUF_SIZE, +}; + +enum da9063_paged_read_msgs { + DA9063_PAGED_READ_MSG_PAGE_SEL = 0, + DA9063_PAGED_READ_MSG_REG_SEL, + DA9063_PAGED_READ_MSG_DATA, + DA9063_PAGED_READ_MSG_CNT, +}; + +static int da9063_i2c_blockreg_read(struct i2c_client *client, u16 addr, + u8 *buf, int count) +{ + struct i2c_msg xfer[DA9063_PAGED_READ_MSG_CNT]; + u8 page_sel_buf[DA9063_PAGE_SEL_BUF_SIZE]; + u8 page_num, paged_addr; + int ret; + + /* Determine page info based on register address */ + page_num = (addr / DA9063_REG_PAGE_SIZE); + if (page_num > 1) { + dev_err(&client->dev, "Invalid register address provided\n"); + return -EINVAL; + } + + paged_addr = (addr % DA9063_REG_PAGE_SIZE) & DA9063_REG_PAGED_ADDR_MASK; + page_sel_buf[DA9063_PAGE_SEL_BUF_PAGE_REG] = DA9063_REG_PAGE_CON; + page_sel_buf[DA9063_PAGE_SEL_BUF_PAGE_VAL] = + (page_num << DA9063_I2C_PAGE_SEL_SHIFT) & DA9063_REG_PAGE_MASK; + + /* Write reg address, page selection */ + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].flags = 0; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].len = DA9063_PAGE_SEL_BUF_SIZE; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].buf = page_sel_buf; + + /* Select register address */ + xfer[DA9063_PAGED_READ_MSG_REG_SEL].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_REG_SEL].flags = 0; + xfer[DA9063_PAGED_READ_MSG_REG_SEL].len = sizeof(paged_addr); + xfer[DA9063_PAGED_READ_MSG_REG_SEL].buf = &paged_addr; + + /* Read data */ + xfer[DA9063_PAGED_READ_MSG_DATA].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_DATA].flags = I2C_M_RD; + xfer[DA9063_PAGED_READ_MSG_DATA].len = count; + xfer[DA9063_PAGED_READ_MSG_DATA].buf = buf; + + ret = i2c_transfer(client->adapter, xfer, DA9063_PAGED_READ_MSG_CNT); + if (ret < 0) { + dev_err(&client->dev, "Paged block read failed: %d\n", ret); + return ret; + } + + if (ret != DA9063_PAGED_READ_MSG_CNT) { + dev_err(&client->dev, "Paged block read failed to complete\n"); + return -EIO; + } + + return 0; +} + +enum { + DA9063_DEV_ID_REG = 0, + DA9063_VAR_ID_REG, + DA9063_CHIP_ID_REGS, +}; + +static int da9063_get_device_type(struct i2c_client *i2c, struct da9063 *da9063) +{ + u8 buf[DA9063_CHIP_ID_REGS]; + int ret; + + ret = da9063_i2c_blockreg_read(i2c, DA9063_REG_DEVICE_ID, buf, + DA9063_CHIP_ID_REGS); + if (ret) + return ret; + + if (buf[DA9063_DEV_ID_REG] != PMIC_CHIP_ID_DA9063) { + dev_err(da9063->dev, + "Invalid chip device ID: 0x%02x\n", + buf[DA9063_DEV_ID_REG]); + return -ENODEV; + } + + dev_info(da9063->dev, + "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", + buf[DA9063_DEV_ID_REG], buf[DA9063_VAR_ID_REG]); + + da9063->variant_code = + (buf[DA9063_VAR_ID_REG] & DA9063_VARIANT_ID_MRC_MASK) + >> DA9063_VARIANT_ID_MRC_SHIFT; + + return 0; +} + +/* + * Variant specific regmap configs + */ + static const struct regmap_range da9063_ad_readable_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_AD_REG_SECOND_D), regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_AD_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063_ad_writeable_ranges[] = { @@ -72,7 +184,7 @@ static const struct regmap_range da9063_bb_readable_ranges[] = { regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063_bb_writeable_ranges[] = { @@ -85,7 +197,7 @@ static const struct regmap_range da9063_bb_writeable_ranges[] = { regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_19), }; -static const struct regmap_range da9063_bb_volatile_ranges[] = { +static const struct regmap_range da9063_bb_da_volatile_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_EVENT_D), regmap_reg_range(DA9063_REG_CONTROL_A, DA9063_REG_CONTROL_B), regmap_reg_range(DA9063_REG_CONTROL_E, DA9063_REG_CONTROL_F), @@ -107,9 +219,9 @@ static const struct regmap_access_table da9063_bb_writeable_table = { .n_yes_ranges = ARRAY_SIZE(da9063_bb_writeable_ranges), }; -static const struct regmap_access_table da9063_bb_volatile_table = { - .yes_ranges = da9063_bb_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(da9063_bb_volatile_ranges), +static const struct regmap_access_table da9063_bb_da_volatile_table = { + .yes_ranges = da9063_bb_da_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_bb_da_volatile_ranges), }; static const struct regmap_range da9063l_bb_readable_ranges[] = { @@ -117,7 +229,7 @@ static const struct regmap_range da9063l_bb_readable_ranges[] = { regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063l_bb_writeable_ranges[] = { @@ -129,7 +241,7 @@ static const struct regmap_range da9063l_bb_writeable_ranges[] = { regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_19), }; -static const struct regmap_range da9063l_bb_volatile_ranges[] = { +static const struct regmap_range da9063l_bb_da_volatile_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_EVENT_D), regmap_reg_range(DA9063_REG_CONTROL_A, DA9063_REG_CONTROL_B), regmap_reg_range(DA9063_REG_CONTROL_E, DA9063_REG_CONTROL_F), @@ -151,15 +263,70 @@ static const struct regmap_access_table da9063l_bb_writeable_table = { .n_yes_ranges = ARRAY_SIZE(da9063l_bb_writeable_ranges), }; -static const struct regmap_access_table da9063l_bb_volatile_table = { - .yes_ranges = da9063l_bb_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(da9063l_bb_volatile_ranges), +static const struct regmap_access_table da9063l_bb_da_volatile_table = { + .yes_ranges = da9063l_bb_da_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_bb_da_volatile_ranges), +}; + +static const struct regmap_range da9063_da_readable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_BB_REG_SECOND_D), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_11), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), +}; + +static const struct regmap_range da9063_da_writeable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_PAGE_CON), + regmap_reg_range(DA9063_REG_FAULT_LOG, DA9063_REG_VSYS_MON), + regmap_reg_range(DA9063_REG_COUNT_S, DA9063_BB_REG_ALARM_Y), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_CONFIG_I, DA9063_BB_REG_MON_REG_4), + regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_11), +}; + +static const struct regmap_access_table da9063_da_readable_table = { + .yes_ranges = da9063_da_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_da_readable_ranges), +}; + +static const struct regmap_access_table da9063_da_writeable_table = { + .yes_ranges = da9063_da_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_da_writeable_ranges), +}; + +static const struct regmap_range da9063l_da_readable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_MON_A10_RES), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_11), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), +}; + +static const struct regmap_range da9063l_da_writeable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_PAGE_CON), + regmap_reg_range(DA9063_REG_FAULT_LOG, DA9063_REG_VSYS_MON), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_CONFIG_I, DA9063_BB_REG_MON_REG_4), + regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_11), +}; + +static const struct regmap_access_table da9063l_da_readable_table = { + .yes_ranges = da9063l_da_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_da_readable_ranges), +}; + +static const struct regmap_access_table da9063l_da_writeable_table = { + .yes_ranges = da9063l_da_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_da_writeable_ranges), }; static const struct regmap_range_cfg da9063_range_cfg[] = { { .range_min = DA9063_REG_PAGE_CON, - .range_max = DA9063_REG_CHIP_VARIANT, + .range_max = DA9063_REG_CONFIG_ID, .selector_reg = DA9063_REG_PAGE_CON, .selector_mask = 1 << DA9063_I2C_PAGE_SEL_SHIFT, .selector_shift = DA9063_I2C_PAGE_SEL_SHIFT, @@ -173,7 +340,7 @@ static struct regmap_config da9063_regmap_config = { .val_bits = 8, .ranges = da9063_range_cfg, .num_ranges = ARRAY_SIZE(da9063_range_cfg), - .max_register = DA9063_REG_CHIP_VARIANT, + .max_register = DA9063_REG_CONFIG_ID, .cache_type = REGCACHE_RBTREE, }; @@ -199,18 +366,72 @@ static int da9063_i2c_probe(struct i2c_client *i2c, da9063->chip_irq = i2c->irq; da9063->type = id->driver_data; - if (da9063->variant_code == PMIC_DA9063_AD) { - da9063_regmap_config.rd_table = &da9063_ad_readable_table; - da9063_regmap_config.wr_table = &da9063_ad_writeable_table; - da9063_regmap_config.volatile_table = &da9063_ad_volatile_table; - } else if (da9063->type == PMIC_TYPE_DA9063L) { - da9063_regmap_config.rd_table = &da9063l_bb_readable_table; - da9063_regmap_config.wr_table = &da9063l_bb_writeable_table; - da9063_regmap_config.volatile_table = &da9063l_bb_volatile_table; - } else { - da9063_regmap_config.rd_table = &da9063_bb_readable_table; - da9063_regmap_config.wr_table = &da9063_bb_writeable_table; - da9063_regmap_config.volatile_table = &da9063_bb_volatile_table; + ret = da9063_get_device_type(i2c, da9063); + if (ret) + return ret; + + switch (da9063->type) { + case PMIC_TYPE_DA9063: + switch (da9063->variant_code) { + case PMIC_DA9063_AD: + da9063_regmap_config.rd_table = + &da9063_ad_readable_table; + da9063_regmap_config.wr_table = + &da9063_ad_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_ad_volatile_table; + break; + case PMIC_DA9063_BB: + case PMIC_DA9063_CA: + da9063_regmap_config.rd_table = + &da9063_bb_readable_table; + da9063_regmap_config.wr_table = + &da9063_bb_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_bb_da_volatile_table; + break; + case PMIC_DA9063_DA: + da9063_regmap_config.rd_table = + &da9063_da_readable_table; + da9063_regmap_config.wr_table = + &da9063_da_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_bb_da_volatile_table; + break; + default: + dev_err(da9063->dev, + "Chip variant not supported for DA9063\n"); + return -ENODEV; + } + break; + case PMIC_TYPE_DA9063L: + switch (da9063->variant_code) { + case PMIC_DA9063_BB: + case PMIC_DA9063_CA: + da9063_regmap_config.rd_table = + &da9063l_bb_readable_table; + da9063_regmap_config.wr_table = + &da9063l_bb_writeable_table; + da9063_regmap_config.volatile_table = + &da9063l_bb_da_volatile_table; + break; + case PMIC_DA9063_DA: + da9063_regmap_config.rd_table = + &da9063l_da_readable_table; + da9063_regmap_config.wr_table = + &da9063l_da_writeable_table; + da9063_regmap_config.volatile_table = + &da9063l_bb_da_volatile_table; + break; + default: + dev_err(da9063->dev, + "Chip variant not supported for DA9063L\n"); + return -ENODEV; + } + break; + default: + dev_err(da9063->dev, "Chip type not supported\n"); + return -ENODEV; } da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 0452b43b0423..a9d9c1cdf546 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2276,6 +2276,8 @@ bool db8500_prcmu_is_ac_wake_requested(void) * * Saves the reset reason code and then sets the APE_SOFTRST register which * fires interrupt to fw + * + * @reset_code: The reason for system reset */ void db8500_prcmu_system_reset(u16 reset_code) { @@ -3004,10 +3006,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent) return mfd_add_devices(parent, 0, ab850x_cell, 1, NULL, 0, NULL); } -/** - * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic - * - */ static int db8500_prcmu_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 39276fa626d2..83e676a096dc 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -287,7 +287,11 @@ static void dln2_rx(struct urb *urb) len = urb->actual_length - sizeof(struct dln2_header); if (handle == DLN2_HANDLE_EVENT) { + unsigned long flags; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); dln2_run_event_callbacks(dln2, id, echo, data, len); + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); } else { /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */ if (dln2_transfer_complete(dln2, urb, handle, echo)) diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c index edfc172b8607..eba88b80d969 100644 --- a/drivers/mfd/hi6421-pmic-core.c +++ b/drivers/mfd/hi6421-pmic-core.c @@ -5,7 +5,7 @@ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd. * http://www.hisilicon.com * Copyright (c) <2013-2017> Linaro Ltd. - * http://www.linaro.org + * https://www.linaro.org * * Author: Guodong Xu <guodong.xu@linaro.org> */ diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 046222684b8b..9a58032f818a 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -201,6 +201,9 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x1ac4), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info }, + /* EBG */ + { PCI_VDEVICE(INTEL, 0x1bad), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x1bae), (kernel_ulong_t)&bxt_uart_info }, /* GLK */ { PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&glk_i2c_info }, { PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&glk_i2c_info }, @@ -230,6 +233,22 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x34ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34eb), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&spt_info }, + /* TGL-H */ + { PCI_VDEVICE(INTEL, 0x43a7), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43a8), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43a9), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43aa), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43ab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43ad), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43ae), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43d8), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43da), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43e8), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43e9), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43ea), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43eb), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43fb), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43fd), (kernel_ulong_t)&bxt_info }, /* EHL */ { PCI_VDEVICE(INTEL, 0x4b28), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x4b29), (kernel_ulong_t)&bxt_uart_info }, diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c index bd94c989d232..71da861e8c27 100644 --- a/drivers/mfd/intel_soc_pmic_mrfld.c +++ b/drivers/mfd/intel_soc_pmic_mrfld.c @@ -91,13 +91,8 @@ static int bcove_ipc_byte_reg_write(void *context, unsigned int reg, { struct intel_soc_pmic *pmic = context; u8 ipc_in = val; - int ret; - ret = intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in); - if (ret) - return ret; - - return 0; + return intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in); } static const struct regmap_config bcove_regmap_config = { diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index f48e21d8b97c..52bec01149e5 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -79,39 +79,31 @@ enum kempld_cells { KEMPLD_UART, }; -static const struct mfd_cell kempld_devs[] = { - [KEMPLD_I2C] = { - .name = "kempld-i2c", - }, - [KEMPLD_WDT] = { - .name = "kempld-wdt", - }, - [KEMPLD_GPIO] = { - .name = "kempld-gpio", - }, - [KEMPLD_UART] = { - .name = "kempld-uart", - }, +static const char *kempld_dev_names[] = { + [KEMPLD_I2C] = "kempld-i2c", + [KEMPLD_WDT] = "kempld-wdt", + [KEMPLD_GPIO] = "kempld-gpio", + [KEMPLD_UART] = "kempld-uart", }; -#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_devs) +#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_dev_names) static int kempld_register_cells_generic(struct kempld_device_data *pld) { - struct mfd_cell devs[KEMPLD_MAX_DEVS]; + struct mfd_cell devs[KEMPLD_MAX_DEVS] = {}; int i = 0; if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C) - devs[i++] = kempld_devs[KEMPLD_I2C]; + devs[i++].name = kempld_dev_names[KEMPLD_I2C]; if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG) - devs[i++] = kempld_devs[KEMPLD_WDT]; + devs[i++].name = kempld_dev_names[KEMPLD_WDT]; if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO) - devs[i++] = kempld_devs[KEMPLD_GPIO]; + devs[i++].name = kempld_dev_names[KEMPLD_GPIO]; if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART) - devs[i++] = kempld_devs[KEMPLD_UART]; + devs[i++].name = kempld_dev_names[KEMPLD_UART]; return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL); } diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c new file mode 100644 index 000000000000..44d5bb462dab --- /dev/null +++ b/drivers/mfd/khadas-mcu.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Khadas System control Microcontroller + * + * Copyright (C) 2020 BayLibre SAS + * + * Author(s): Neil Armstrong <narmstrong@baylibre.com> + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/khadas-mcu.h> +#include <linux/module.h> +#include <linux/regmap.h> + +static bool khadas_mcu_reg_volatile(struct device *dev, unsigned int reg) +{ + if (reg >= KHADAS_MCU_USER_DATA_0_REG && + reg < KHADAS_MCU_PWR_OFF_CMD_REG) + return true; + + switch (reg) { + case KHADAS_MCU_PWR_OFF_CMD_REG: + case KHADAS_MCU_PASSWD_START_REG: + case KHADAS_MCU_CHECK_VEN_PASSWD_REG: + case KHADAS_MCU_CHECK_USER_PASSWD_REG: + case KHADAS_MCU_WOL_INIT_START_REG: + case KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG: + return true; + default: + return false; + } +} + +static bool khadas_mcu_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case KHADAS_MCU_PASSWD_VEN_0_REG: + case KHADAS_MCU_PASSWD_VEN_1_REG: + case KHADAS_MCU_PASSWD_VEN_2_REG: + case KHADAS_MCU_PASSWD_VEN_3_REG: + case KHADAS_MCU_PASSWD_VEN_4_REG: + case KHADAS_MCU_PASSWD_VEN_5_REG: + case KHADAS_MCU_MAC_0_REG: + case KHADAS_MCU_MAC_1_REG: + case KHADAS_MCU_MAC_2_REG: + case KHADAS_MCU_MAC_3_REG: + case KHADAS_MCU_MAC_4_REG: + case KHADAS_MCU_MAC_5_REG: + case KHADAS_MCU_USID_0_REG: + case KHADAS_MCU_USID_1_REG: + case KHADAS_MCU_USID_2_REG: + case KHADAS_MCU_USID_3_REG: + case KHADAS_MCU_USID_4_REG: + case KHADAS_MCU_USID_5_REG: + case KHADAS_MCU_VERSION_0_REG: + case KHADAS_MCU_VERSION_1_REG: + case KHADAS_MCU_DEVICE_NO_0_REG: + case KHADAS_MCU_DEVICE_NO_1_REG: + case KHADAS_MCU_FACTORY_TEST_REG: + case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG: + return false; + default: + return true; + } +} + +static const struct regmap_config khadas_mcu_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG, + .volatile_reg = khadas_mcu_reg_volatile, + .writeable_reg = khadas_mcu_reg_writeable, + .cache_type = REGCACHE_RBTREE, +}; + +static struct mfd_cell khadas_mcu_fan_cells[] = { + /* VIM1/2 Rev13+ and VIM3 only */ + { .name = "khadas-mcu-fan-ctrl", }, +}; + +static struct mfd_cell khadas_mcu_cells[] = { + { .name = "khadas-mcu-user-mem", }, +}; + +static int khadas_mcu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct khadas_mcu *ddata; + int ret; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + i2c_set_clientdata(client, ddata); + + ddata->dev = dev; + + ddata->regmap = devm_regmap_init_i2c(client, &khadas_mcu_regmap_config); + if (IS_ERR(ddata->regmap)) { + ret = PTR_ERR(ddata->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", ret); + return ret; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + khadas_mcu_cells, + ARRAY_SIZE(khadas_mcu_cells), + NULL, 0, NULL); + if (ret) + return ret; + + if (of_find_property(dev->of_node, "#cooling-cells", NULL)) + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + khadas_mcu_fan_cells, + ARRAY_SIZE(khadas_mcu_fan_cells), + NULL, 0, NULL); + + return 0; +} + +static const struct of_device_id khadas_mcu_of_match[] = { + { .compatible = "khadas,mcu", }, + {}, +}; +MODULE_DEVICE_TABLE(of, khadas_mcu_of_match); + +static struct i2c_driver khadas_mcu_driver = { + .driver = { + .name = "khadas-mcu-core", + .of_match_table = of_match_ptr(khadas_mcu_of_match), + }, + .probe = khadas_mcu_probe, +}; +module_i2c_driver(khadas_mcu_driver); + +MODULE_DESCRIPTION("Khadas MCU core driver"); +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c index 34fba06ec705..2537dfade51c 100644 --- a/drivers/mfd/lm3533-ctrlbank.c +++ b/drivers/mfd/lm3533-ctrlbank.c @@ -17,7 +17,6 @@ #define LM3533_MAX_CURRENT_MAX 29800 #define LM3533_MAX_CURRENT_STEP 800 -#define LM3533_BRIGHTNESS_MAX 255 #define LM3533_PWM_MAX 0x3f #define LM3533_REG_PWM_BASE 0x14 @@ -89,41 +88,33 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax) } EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current); -#define lm3533_ctrlbank_set(_name, _NAME) \ -int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val) \ -{ \ - u8 reg; \ - int ret; \ - \ - if (val > LM3533_##_NAME##_MAX) \ - return -EINVAL; \ - \ - reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \ - ret = lm3533_write(cb->lm3533, reg, val); \ - if (ret) \ - dev_err(cb->dev, "failed to set " #_name "\n"); \ - \ - return ret; \ -} \ -EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name); - -#define lm3533_ctrlbank_get(_name, _NAME) \ -int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val) \ -{ \ - u8 reg; \ - int ret; \ - \ - reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \ - ret = lm3533_read(cb->lm3533, reg, val); \ - if (ret) \ - dev_err(cb->dev, "failed to get " #_name "\n"); \ - \ - return ret; \ -} \ -EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name); - -lm3533_ctrlbank_set(brightness, BRIGHTNESS); -lm3533_ctrlbank_get(brightness, BRIGHTNESS); +int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val) +{ + u8 reg; + int ret; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE); + ret = lm3533_write(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to set brightness\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness); + +int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val) +{ + u8 reg; + int ret; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE); + ret = lm3533_read(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to get brightness\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness); /* * PWM-input control mask: @@ -135,9 +126,36 @@ lm3533_ctrlbank_get(brightness, BRIGHTNESS); * bit 1 - PWM-input enabled in Zone 0 * bit 0 - PWM-input enabled */ -lm3533_ctrlbank_set(pwm, PWM); -lm3533_ctrlbank_get(pwm, PWM); +int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val) +{ + u8 reg; + int ret; + + if (val > LM3533_PWM_MAX) + return -EINVAL; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE); + ret = lm3533_write(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to set PWM mask\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm); + +int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val) +{ + u8 reg; + int ret; + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE); + ret = lm3533_read(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to get PWM mask\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_pwm); MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>"); MODULE_DESCRIPTION("LM3533 Control Bank interface"); diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c index 873c608e6a5d..858c9e0a49a4 100644 --- a/drivers/mfd/lp873x.c +++ b/drivers/mfd/lp873x.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Keerthy <j-keerthy@ti.com> * diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c index 4a5c8ade4ae0..2268be9113f1 100644 --- a/drivers/mfd/lp87565.c +++ b/drivers/mfd/lp87565.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Keerthy <j-keerthy@ti.com> */ diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c index 7e0835cb062b..8a8d733fdce5 100644 --- a/drivers/mfd/madera-core.c +++ b/drivers/mfd/madera-core.c @@ -44,7 +44,10 @@ static const char * const madera_core_supplies[] = { }; static const struct mfd_cell madera_ldo1_devs[] = { - { .name = "madera-ldo1" }, + { + .name = "madera-ldo1", + .level = MFD_DEP_LEVEL_HIGH, + }, }; static const char * const cs47l15_supplies[] = { @@ -55,8 +58,8 @@ static const char * const cs47l15_supplies[] = { static const struct mfd_cell cs47l15_devs[] = { { .name = "madera-pinctrl", }, - { .name = "madera-irq" }, - { .name = "madera-gpio" }, + { .name = "madera-irq", }, + { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l15_supplies, @@ -108,7 +111,7 @@ static const char * const cs47l85_supplies[] = { static const struct mfd_cell cs47l85_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq", }, - { .name = "madera-micsupp" }, + { .name = "madera-micsupp", }, { .name = "madera-gpio", }, { .name = "madera-extcon", @@ -155,10 +158,10 @@ static const char * const cs47l92_supplies[] = { }; static const struct mfd_cell cs47l92_devs[] = { - { .name = "madera-pinctrl" }, + { .name = "madera-pinctrl", }, { .name = "madera-irq", }, { .name = "madera-micsupp", }, - { .name = "madera-gpio" }, + { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l92_supplies, @@ -743,18 +746,22 @@ int madera_dev_exit(struct madera *madera) /* Prevent any IRQs being serviced while we clean up */ disable_irq(madera->irq); - /* - * DCVDD could be supplied by a child node, we must disable it before - * removing the children, and prevent PM runtime from turning it back on - */ - pm_runtime_disable(madera->dev); + pm_runtime_get_sync(madera->dev); - clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); + mfd_remove_devices(madera->dev); + + pm_runtime_disable(madera->dev); regulator_disable(madera->dcvdd); regulator_put(madera->dcvdd); - mfd_remove_devices(madera->dev); + mfd_remove_devices_late(madera->dev); + + pm_runtime_set_suspended(madera->dev); + pm_runtime_put_noidle(madera->dev); + + clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); + madera_enable_hard_reset(madera); regulator_bulk_disable(madera->num_core_supplies, diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c index 6b965eb034b6..7df5b9ba5855 100644 --- a/drivers/mfd/madera-i2c.c +++ b/drivers/mfd/madera-i2c.c @@ -88,7 +88,6 @@ static int madera_i2c_probe(struct i2c_client *i2c, if (!madera) return -ENOMEM; - madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config); if (IS_ERR(madera->regmap)) { ret = PTR_ERR(madera->regmap); diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index fd8864cafd25..be185e9d5f16 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL_GPL(maxim_charger_currents); int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits, unsigned int min_ua, unsigned int max_ua, u8 *dst) { - unsigned int current_bits = 0xf; + unsigned int current_bits; if (min_ua > max_ua) return -EINVAL; diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index f5a73af60dd4..c3651f06684f 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/list.h> #include <linux/property.h> #include <linux/mfd/core.h> #include <linux/pm_runtime.h> @@ -17,8 +18,17 @@ #include <linux/module.h> #include <linux/irqdomain.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/regulator/consumer.h> +static LIST_HEAD(mfd_of_node_list); + +struct mfd_of_node_entry { + struct list_head list; + struct device *dev; + struct device_node *np; +}; + static struct device_type mfd_dev_type = { .name = "mfd_device", }; @@ -107,6 +117,55 @@ static inline void mfd_acpi_add_device(const struct mfd_cell *cell, } #endif +static int mfd_match_of_node_to_dev(struct platform_device *pdev, + struct device_node *np, + const struct mfd_cell *cell) +{ +#if IS_ENABLED(CONFIG_OF) + struct mfd_of_node_entry *of_entry; + const __be32 *reg; + u64 of_node_addr; + + /* Skip devices 'disabled' by Device Tree */ + if (!of_device_is_available(np)) + return -ENODEV; + + /* Skip if OF node has previously been allocated to a device */ + list_for_each_entry(of_entry, &mfd_of_node_list, list) + if (of_entry->np == np) + return -EAGAIN; + + if (!cell->use_of_reg) + /* No of_reg defined - allocate first free compatible match */ + goto allocate_of_node; + + /* We only care about each node's first defined address */ + reg = of_get_address(np, 0, NULL, NULL); + if (!reg) + /* OF node does not contatin a 'reg' property to match to */ + return -EAGAIN; + + of_node_addr = of_read_number(reg, of_n_addr_cells(np)); + + if (cell->of_reg != of_node_addr) + /* No match */ + return -EAGAIN; + +allocate_of_node: + of_entry = kzalloc(sizeof(*of_entry), GFP_KERNEL); + if (!of_entry) + return -ENOMEM; + + of_entry->dev = &pdev->dev; + of_entry->np = np; + list_add_tail(&of_entry->list, &mfd_of_node_list); + + pdev->dev.of_node = np; + pdev->dev.fwnode = &np->fwnode; +#endif + return 0; +} + static int mfd_add_device(struct device *parent, int id, const struct mfd_cell *cell, struct resource *mem_base, @@ -115,6 +174,7 @@ static int mfd_add_device(struct device *parent, int id, struct resource *res; struct platform_device *pdev; struct device_node *np = NULL; + struct mfd_of_node_entry *of_entry, *tmp; int ret = -ENOMEM; int platform_id; int r; @@ -149,19 +209,22 @@ static int mfd_add_device(struct device *parent, int id, if (ret < 0) goto fail_res; - if (parent->of_node && cell->of_compatible) { + if (IS_ENABLED(CONFIG_OF) && parent->of_node && cell->of_compatible) { for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { - if (!of_device_is_available(np)) { - /* Ignore disabled devices error free */ - ret = 0; + ret = mfd_match_of_node_to_dev(pdev, np, cell); + if (ret == -EAGAIN) + continue; + if (ret) goto fail_alias; - } - pdev->dev.of_node = np; - pdev->dev.fwnode = &np->fwnode; + break; } } + + if (!pdev->dev.of_node) + pr_warn("%s: Failed to locate of_node [id: %d]\n", + cell->name, platform_id); } mfd_acpi_add_device(cell, pdev); @@ -170,13 +233,13 @@ static int mfd_add_device(struct device *parent, int id, ret = platform_device_add_data(pdev, cell->platform_data, cell->pdata_size); if (ret) - goto fail_alias; + goto fail_of_entry; } if (cell->properties) { ret = platform_device_add_properties(pdev, cell->properties); if (ret) - goto fail_alias; + goto fail_of_entry; } for (r = 0; r < cell->num_resources; r++) { @@ -213,18 +276,18 @@ static int mfd_add_device(struct device *parent, int id, if (has_acpi_companion(&pdev->dev)) { ret = acpi_check_resource_conflict(&res[r]); if (ret) - goto fail_alias; + goto fail_of_entry; } } } ret = platform_device_add_resources(pdev, res, cell->num_resources); if (ret) - goto fail_alias; + goto fail_of_entry; ret = platform_device_add(pdev); if (ret) - goto fail_alias; + goto fail_of_entry; if (cell->pm_runtime_no_callbacks) pm_runtime_no_callbacks(&pdev->dev); @@ -233,6 +296,12 @@ static int mfd_add_device(struct device *parent, int id, return 0; +fail_of_entry: + list_for_each_entry_safe(of_entry, tmp, &mfd_of_node_list, list) + if (of_entry->dev == &pdev->dev) { + list_del(&of_entry->list); + kfree(of_entry); + } fail_alias: regulator_bulk_unregister_supply_alias(&pdev->dev, cell->parent_supplies, @@ -287,6 +356,7 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) { struct platform_device *pdev; const struct mfd_cell *cell; + int *level = data; if (dev->type != &mfd_dev_type) return 0; @@ -294,16 +364,31 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) pdev = to_platform_device(dev); cell = mfd_get_cell(pdev); + if (level && cell->level > *level) + return 0; + regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies, cell->num_parent_supplies); + kfree(cell); + platform_device_unregister(pdev); return 0; } +void mfd_remove_devices_late(struct device *parent) +{ + int level = MFD_DEP_LEVEL_HIGH; + + device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn); +} +EXPORT_SYMBOL(mfd_remove_devices_late); + void mfd_remove_devices(struct device *parent) { - device_for_each_child_reverse(parent, NULL, mfd_remove_devices_fn); + int level = MFD_DEP_LEVEL_NORMAL; + + device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn); } EXPORT_SYMBOL(mfd_remove_devices); @@ -318,6 +403,16 @@ static void devm_mfd_dev_release(struct device *dev, void *res) * Returns 0 on success or an appropriate negative error number on failure. * All child-devices of the MFD will automatically be removed when it gets * unbinded. + * + * @dev: Pointer to parent device. + * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care + * of device numbering, or will be added to a device's cell_id. + * @cells: Array of (struct mfd_cell)s describing child devices. + * @n_devs: Number of child devices to register. + * @mem_base: Parent register range resource for child devices. + * @irq_base: Base of the range of virtual interrupt numbers allocated for + * this MFD device. Unused if @domain is specified. + * @domain: Interrupt domain to create mappings for hardware interrupts. */ int devm_mfd_add_devices(struct device *dev, int id, const struct mfd_cell *cells, int n_devs, diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c index 52f38e57cdc1..2283d88adcc2 100644 --- a/drivers/mfd/motorola-cpcap.c +++ b/drivers/mfd/motorola-cpcap.c @@ -214,6 +214,28 @@ static const struct regmap_config cpcap_regmap_config = { .val_format_endian = REGMAP_ENDIAN_LITTLE, }; +#ifdef CONFIG_PM_SLEEP +static int cpcap_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + + disable_irq(spi->irq); + + return 0; +} + +static int cpcap_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + + enable_irq(spi->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume); + static const struct mfd_cell cpcap_mfd_devices[] = { { .name = "cpcap_adc", @@ -313,6 +335,7 @@ static struct spi_driver cpcap_driver = { .driver = { .name = "cpcap-core", .of_match_table = cpcap_of_match, + .pm = &cpcap_pm, }, .probe = cpcap_probe, }; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1f4f01b02d98..1e6431cb8536 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -2,7 +2,7 @@ /** * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI * - * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com * Author: Keshava Munegowda <keshava_mgowda@ti.com> * Author: Roger Quadros <rogerq@ti.com> */ @@ -120,7 +120,7 @@ static inline u32 usbhs_read(void __iomem *base, u32 reg) /*-------------------------------------------------------------------------*/ -/** +/* * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h> * to the device tree binding portN-mode found in * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' @@ -526,6 +526,8 @@ static const struct of_device_id usbhs_child_match_table[] = { * usbhs_omap_probe - initialize TI-based HCDs * * Allocates basic resources for this USB host controller. + * + * @pdev: Pointer to this device's platform device structure */ static int usbhs_omap_probe(struct platform_device *pdev) { diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c index 4b7f73c317e8..16fad79c73f1 100644 --- a/drivers/mfd/omap-usb-tll.c +++ b/drivers/mfd/omap-usb-tll.c @@ -2,7 +2,7 @@ /** * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI * - * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com * Author: Keshava Munegowda <keshava_mgowda@ti.com> * Author: Roger Quadros <rogerq@ti.com> */ @@ -199,6 +199,8 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) * usbtll_omap_probe - initialize TI-based HCDs * * Allocates basic resources for this USB host controller. + * + * @pdev: Pointer to this device's platform device structure */ static int usbtll_omap_probe(struct platform_device *pdev) { diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c index 26c7b63e008a..abaab541df19 100644 --- a/drivers/mfd/rave-sp.c +++ b/drivers/mfd/rave-sp.c @@ -96,7 +96,7 @@ struct rave_sp_deframer { * @data: Buffer to store reply payload in * @code: Expected reply code * @ackid: Expected reply ACK ID - * @completion: Successful reply reception completion + * @received: Successful reply reception completion */ struct rave_sp_reply { size_t length; diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index 232de50562f9..e25407ed3ad4 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -44,6 +44,9 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg) case RN5T618_INTMON: case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2: case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR: + case RN5T618_CHGSTATE: + case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI: + case RN5T618_CONTROL ... RN5T618_CC_AVEREG0: return true; default: return false; @@ -77,7 +80,7 @@ static const struct regmap_irq_chip rc5t619_irq_chip = { .mask_invert = true, }; -static struct rn5t618 *rn5t618_pm_power_off; +static struct i2c_client *rn5t618_pm_power_off; static struct notifier_block rn5t618_restart_handler; static int rn5t618_irq_init(struct rn5t618 *rn5t618) @@ -110,13 +113,38 @@ static int rn5t618_irq_init(struct rn5t618 *rn5t618) static void rn5t618_trigger_poweroff_sequence(bool repower) { + int ret; + /* disable automatic repower-on */ - regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, - RN5T618_REPCNT_REPWRON, - repower ? RN5T618_REPCNT_REPWRON : 0); + ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT); + if (ret < 0) + goto err; + + ret &= ~RN5T618_REPCNT_REPWRON; + if (repower) + ret |= RN5T618_REPCNT_REPWRON; + + ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off, + RN5T618_REPCNT, (u8)ret); + if (ret < 0) + goto err; + /* start power-off sequence */ - regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, - RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); + ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT); + if (ret < 0) + goto err; + + ret |= RN5T618_SLPCNT_SWPWROFF; + + ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off, + RN5T618_SLPCNT, (u8)ret); + if (ret < 0) + goto err; + + return; + +err: + dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret); } static void rn5t618_power_off(void) @@ -189,7 +217,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c) return ret; } - rn5t618_pm_power_off = priv; + rn5t618_pm_power_off = i2c; if (of_device_is_system_power_controller(i2c->dev.of_node)) { if (!pm_power_off) pm_power_off = rn5t618_power_off; @@ -211,9 +239,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c) static int rn5t618_i2c_remove(struct i2c_client *i2c) { - struct rn5t618 *priv = i2c_get_clientdata(i2c); - - if (priv == rn5t618_pm_power_off) { + if (i2c == rn5t618_pm_power_off) { rn5t618_pm_power_off = NULL; pm_power_off = NULL; } diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index 4a09ce9609c9..d15b3e783369 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -241,13 +241,13 @@ static int si476x_core_parse_and_nag_about_error(struct si476x_core *core) /** * si476x_core_send_command() - sends a command to si476x and waits its * response - * @core: si476x_device structure for the device we are + * @core: si476x_device structure for the device we are * communicating with * @command: command id * @args: command arguments we are sending * @argn: actual size of @args - * @response: buffer to place the expected response from the device - * @respn: actual size of @response + * @resp: buffer to place the expected response from the device + * @respn: actual size of @resp * @usecs: amount of time to wait before reading the response (in * usecs) * @@ -496,7 +496,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); * enable 1MOhm pulldown * SI476X_DFS_DAUDIO - set the pin to be a part of digital * audio interface - * @dout - DOUT pin function configuration: + * @dout: - DOUT pin function configuration: * SI476X_DOUT_NOOP - do not modify the behaviour * SI476X_DOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -504,7 +504,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); * port 1 * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S * port 1 - * @xout - XOUT pin function configuration: + * @xout: - XOUT pin function configuration: * SI476X_XOUT_NOOP - do not modify the behaviour * SI476X_XOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -540,25 +540,25 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg); /** * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND' - * @core - device to send the command to - * @iqclk - IQCL pin function configuration: + * @core: - device to send the command to + * @iqclk: - IQCL pin function configuration: * SI476X_IQCLK_NOOP - do not modify the behaviour * SI476X_IQCLK_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace * in master mode - * @iqfs - IQFS pin function configuration: + * @iqfs: - IQFS pin function configuration: * SI476X_IQFS_NOOP - do not modify the behaviour * SI476X_IQFS_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQFS_IQ - set pin to be a part of I/Q interace * in master mode - * @iout - IOUT pin function configuration: + * @iout: - IOUT pin function configuration: * SI476X_IOUT_NOOP - do not modify the behaviour * SI476X_IOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IOUT_OUTPUT - set pin to be I out - * @qout - QOUT pin function configuration: + * @qout: - QOUT pin function configuration: * SI476X_QOUT_NOOP - do not modify the behaviour * SI476X_QOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -590,29 +590,29 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg); /** * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device - * @core - device to send the command to - * @icin - ICIN pin function configuration: + * @core: - device to send the command to + * @icin: - ICIN pin function configuration: * SI476X_ICIN_NOOP - do not modify the behaviour * SI476X_ICIN_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link - * @icip - ICIP pin function configuration: + * @icip: - ICIP pin function configuration: * SI476X_ICIP_NOOP - do not modify the behaviour * SI476X_ICIP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link - * @icon - ICON pin function configuration: + * @icon: - ICON pin function configuration: * SI476X_ICON_NOOP - do not modify the behaviour * SI476X_ICON_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICON_I2S - set the pin to be a part of audio * interface in slave mode (DCLK) * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link - * @icop - ICOP pin function configuration: + * @icop: - ICOP pin function configuration: * SI476X_ICOP_NOOP - do not modify the behaviour * SI476X_ICOP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -647,8 +647,8 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg); /** * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the * device - * @core - device to send the command to - * @lrout - LROUT pin function configuration: + * @core: - device to send the command to + * @lrout: - LROUT pin function configuration: * SI476X_LROUT_NOOP - do not modify the behaviour * SI476X_LROUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -675,15 +675,15 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg); /** * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device - * @core - device to send the command to - * @intb - INTB pin function configuration: + * @core: - device to send the command to + * @intb: - INTB pin function configuration: * SI476X_INTB_NOOP - do not modify the behaviour * SI476X_INTB_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_INTB_DAUDIO - set pin to be a part of digital * audio interface in slave mode * SI476X_INTB_IRQ - set pin to be an interrupt request line - * @a1 - A1 pin function configuration: + * @a1: - A1 pin function configuration: * SI476X_A1_NOOP - do not modify the behaviour * SI476X_A1_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -728,14 +728,10 @@ static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core, /** * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the * device - * @core - device to send the command to - * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT, - * RSSSILINT, BLENDINT, MULTHINT and MULTLINT - * @attune - when set the values in the status report are the values - * that were calculated at tune - * @cancel - abort ongoing seek/tune opertation - * @stcack - clear the STCINT bin in status register - * @report - all signal quality information retured by the command + * @core: - device to send the command to + * @rsqargs: - pointer to a structure containing a group of sub-args + * relevant to sending the RSQ status command + * @report: - all signal quality information retured by the command * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure @@ -862,9 +858,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status); /** * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and @@ -890,12 +886,14 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start); /** * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the * device - * @core - device to send the command to - * @status_only - if set the data is not removed from RDSFIFO, + * @core: - device to send the command to + * @status_only: - if set the data is not removed from RDSFIFO, * RDSFIFOUSED is not decremented and data in all the * rest RDS data contains the last valid info received - * @mtfifo if set the command clears RDS receive FIFO - * @intack if set the command clards the RDSINT bit. + * @mtfifo: if set the command clears RDS receive FIFO + * @intack: if set the command clards the RDSINT bit. + * @report: - all signal quality information retured by the command + * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure */ @@ -1036,9 +1034,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status); /** * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c index c8d28b844def..c1d7b845244e 100644 --- a/drivers/mfd/si476x-i2c.c +++ b/drivers/mfd/si476x-i2c.c @@ -534,6 +534,11 @@ static irqreturn_t si476x_core_interrupt(int irq, void *dev) /** * si476x_firmware_version_to_revision() * @core: Core device structure + * @func: Selects the boot function of the device: + * *_BOOTLOADER - Boot loader + * *_FM_RECEIVER - FM receiver + * *_AM_RECEIVER - AM receiver + * *_WB_RECEIVER - Weatherband receiver * @major: Firmware major number * @minor1: Firmware first minor number * @minor2: Firmware second minor number @@ -583,7 +588,7 @@ static int si476x_core_fwver_to_revision(struct si476x_core *core, goto unknown_revision; } case SI476X_FUNC_BOOTLOADER: - default: /* FALLTHROUG */ + default: /* FALLTHROUGH */ BUG(); return -1; } diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c deleted file mode 100644 index 57b792eb58fd..000000000000 --- a/drivers/mfd/smsc-ece1099.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * TI SMSC MFD Driver - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * - * Author: Sourav Poddar <sourav.poddar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; GPL v2. - * - */ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/workqueue.h> -#include <linux/irq.h> -#include <linux/regmap.h> -#include <linux/err.h> -#include <linux/mfd/core.h> -#include <linux/mfd/smsc.h> -#include <linux/of_platform.h> - -static const struct regmap_config smsc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .max_register = SMSC_VEN_ID_H, - .cache_type = REGCACHE_RBTREE, -}; - -static int smsc_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct smsc *smsc; - int devid, rev, venid_l, venid_h; - int ret; - - smsc = devm_kzalloc(&i2c->dev, sizeof(*smsc), GFP_KERNEL); - if (!smsc) - return -ENOMEM; - - smsc->regmap = devm_regmap_init_i2c(i2c, &smsc_regmap_config); - if (IS_ERR(smsc->regmap)) - return PTR_ERR(smsc->regmap); - - i2c_set_clientdata(i2c, smsc); - smsc->dev = &i2c->dev; - -#ifdef CONFIG_OF - of_property_read_u32(i2c->dev.of_node, "clock", &smsc->clk); -#endif - - regmap_read(smsc->regmap, SMSC_DEV_ID, &devid); - regmap_read(smsc->regmap, SMSC_DEV_REV, &rev); - regmap_read(smsc->regmap, SMSC_VEN_ID_L, &venid_l); - regmap_read(smsc->regmap, SMSC_VEN_ID_H, &venid_h); - - dev_info(&i2c->dev, "SMSCxxx devid: %02x rev: %02x venid: %02x\n", - devid, rev, (venid_h << 8) | venid_l); - - ret = regmap_write(smsc->regmap, SMSC_CLK_CTRL, smsc->clk); - if (ret) - return ret; - -#ifdef CONFIG_OF - if (i2c->dev.of_node) - ret = devm_of_platform_populate(&i2c->dev); -#endif - - return ret; -} - -static const struct i2c_device_id smsc_i2c_id[] = { - { "smscece1099", 0}, - {}, -}; - -static struct i2c_driver smsc_i2c_driver = { - .driver = { - .name = "smsc", - }, - .probe = smsc_i2c_probe, - .id_table = smsc_i2c_id, -}; -builtin_i2c_driver(smsc_i2c_driver); diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c index 33336cde4724..f8a8b918c60d 100644 --- a/drivers/mfd/sprd-sc27xx-spi.c +++ b/drivers/mfd/sprd-sc27xx-spi.c @@ -7,7 +7,9 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mfd/core.h> +#include <linux/mfd/sc27xx-pmic.h> #include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/spi/spi.h> #include <uapi/linux/usb/charger.h> @@ -93,73 +95,6 @@ enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev) } EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type); -static const struct mfd_cell sprd_pmic_devs[] = { - { - .name = "sc27xx-wdt", - .of_compatible = "sprd,sc2731-wdt", - }, { - .name = "sc27xx-rtc", - .of_compatible = "sprd,sc2731-rtc", - }, { - .name = "sc27xx-charger", - .of_compatible = "sprd,sc2731-charger", - }, { - .name = "sc27xx-chg-timer", - .of_compatible = "sprd,sc2731-chg-timer", - }, { - .name = "sc27xx-fast-chg", - .of_compatible = "sprd,sc2731-fast-chg", - }, { - .name = "sc27xx-chg-wdt", - .of_compatible = "sprd,sc2731-chg-wdt", - }, { - .name = "sc27xx-typec", - .of_compatible = "sprd,sc2731-typec", - }, { - .name = "sc27xx-flash", - .of_compatible = "sprd,sc2731-flash", - }, { - .name = "sc27xx-eic", - .of_compatible = "sprd,sc2731-eic", - }, { - .name = "sc27xx-efuse", - .of_compatible = "sprd,sc2731-efuse", - }, { - .name = "sc27xx-thermal", - .of_compatible = "sprd,sc2731-thermal", - }, { - .name = "sc27xx-adc", - .of_compatible = "sprd,sc2731-adc", - }, { - .name = "sc27xx-audio-codec", - .of_compatible = "sprd,sc2731-audio-codec", - }, { - .name = "sc27xx-regulator", - .of_compatible = "sprd,sc2731-regulator", - }, { - .name = "sc27xx-vibrator", - .of_compatible = "sprd,sc2731-vibrator", - }, { - .name = "sc27xx-keypad-led", - .of_compatible = "sprd,sc2731-keypad-led", - }, { - .name = "sc27xx-bltc", - .of_compatible = "sprd,sc2731-bltc", - }, { - .name = "sc27xx-fgu", - .of_compatible = "sprd,sc2731-fgu", - }, { - .name = "sc27xx-7sreset", - .of_compatible = "sprd,sc2731-7sreset", - }, { - .name = "sc27xx-poweroff", - .of_compatible = "sprd,sc2731-poweroff", - }, { - .name = "sc27xx-syscon", - .of_compatible = "sprd,sc2731-syscon", - }, -}; - static int sprd_pmic_spi_write(void *context, const void *data, size_t count) { struct device *dev = context; @@ -250,10 +185,8 @@ static int sprd_pmic_probe(struct spi_device *spi) return -ENOMEM; ddata->irq_chip.irqs = ddata->irqs; - for (i = 0; i < pdata->num_irqs; i++) { - ddata->irqs[i].reg_offset = i / pdata->num_irqs; - ddata->irqs[i].mask = BIT(i % pdata->num_irqs); - } + for (i = 0; i < pdata->num_irqs; i++) + ddata->irqs[i].mask = BIT(i); ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, 0, @@ -263,12 +196,9 @@ static int sprd_pmic_probe(struct spi_device *spi) return ret; } - ret = devm_mfd_add_devices(&spi->dev, PLATFORM_DEVID_AUTO, - sprd_pmic_devs, ARRAY_SIZE(sprd_pmic_devs), - NULL, 0, - regmap_irq_get_domain(ddata->irq_data)); + ret = devm_of_platform_populate(&spi->dev); if (ret) { - dev_err(&spi->dev, "Failed to register device %d\n", ret); + dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret); return ret; } diff --git a/drivers/mfd/stm32-lptimer.c b/drivers/mfd/stm32-lptimer.c index a00f99f36559..746e51a17cc8 100644 --- a/drivers/mfd/stm32-lptimer.c +++ b/drivers/mfd/stm32-lptimer.c @@ -17,6 +17,7 @@ static const struct regmap_config stm32_lptimer_regmap_cfg = { .val_bits = 32, .reg_stride = sizeof(u32), .max_register = STM32_LPTIM_MAX_REGISTER, + .fast_io = true, }; static int stm32_lptimer_detect_encoder(struct stm32_lptimer *ddata) diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 3a97816d0cba..75859e492984 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) } } - syscon_config.name = of_node_full_name(np); + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, + (u64)res.start); syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width * 8; syscon_config.max_register = resource_size(&res) - reg_io_width; regmap = regmap_init_mmio(NULL, base, &syscon_config); + kfree(syscon_config.name); if (IS_ERR(regmap)) { pr_err("regmap init failed\n"); ret = PTR_ERR(regmap); diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 67c9995bb1aa..7882a37ffc35 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -18,7 +18,7 @@ #include <linux/mfd/tc3589x.h> #include <linux/err.h> -/** +/* * enum tc3589x_version - indicates the TC3589x version */ enum tc3589x_version { diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 926c289cb040..0e6e25308190 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -1,7 +1,7 @@ /* * TI Touch Screen / ADC MFD driver * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 65fcc58c02da..7e7dbee58ca9 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -404,7 +404,6 @@ static void tps65010_work(struct work_struct *work) tps65010_interrupt(tps); if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) { - int status; u8 chgconfig, tmp; chgconfig = i2c_smbus_read_byte_data(tps->client, @@ -415,8 +414,8 @@ static void tps65010_work(struct work_struct *work) else if (tps->vbus >= 100) chgconfig |= TPS_VBUS_CHARGING; - status = i2c_smbus_write_byte_data(tps->client, - TPS_CHGCONFIG, chgconfig); + i2c_smbus_write_byte_data(tps->client, + TPS_CHGCONFIG, chgconfig); /* vbus update fails unless VBUS is connected! */ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG); diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c index 43119a6867fe..341466ef20cc 100644 --- a/drivers/mfd/tps65086.c +++ b/drivers/mfd/tps65086.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 7566ce4457a0..2d9c282ec917 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -3,7 +3,7 @@ * * TPS65217 chip family multi-function driver * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -205,7 +205,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_read); /** * tps65217_reg_write: Write a single tps65217 register. * - * @tps65217: Device to write to. + * @tps: Device to write to. * @reg: Register to write to. * @val: Value to write. * @level: Password protected level @@ -250,7 +250,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_write); /** * tps65217_update_bits: Modify bits w.r.t mask, val and level. * - * @tps65217: Device to write to. + * @tps: Device to write to. * @reg: Register to read-write to. * @mask: Mask. * @val: Value to write. diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index a62ea4cb8be7..167e9fc308ef 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -1,7 +1,7 @@ /* * Driver for TPS65218 Integrated power management chipsets * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 as @@ -48,7 +48,7 @@ static const struct mfd_cell tps65218_cells[] = { /** * tps65218_reg_write: Write a single tps65218 register. * - * @tps65218: Device to write to. + * @tps: Device to write to. * @reg: Register to write to. * @val: Value to write. * @level: Password protected level @@ -79,7 +79,7 @@ EXPORT_SYMBOL_GPL(tps65218_reg_write); /** * tps65218_update_bits: Modify bits w.r.t mask, val and level. * - * @tps65218: Device to write to. + * @tps: Device to write to. * @reg: Register to read-write to. * @mask: Mask. * @val: Value to write. diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index c8aadd39324e..c36597797ddd 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -309,18 +309,19 @@ static const struct irq_domain_ops tps6586x_domain_ops = { static irqreturn_t tps6586x_irq(int irq, void *data) { struct tps6586x *tps6586x = data; - u32 acks; + uint32_t acks; + __le32 val; int ret = 0; ret = tps6586x_reads(tps6586x->dev, TPS6586X_INT_ACK1, - sizeof(acks), (uint8_t *)&acks); + sizeof(acks), (uint8_t *)&val); if (ret < 0) { dev_err(tps6586x->dev, "failed to read interrupt status\n"); return IRQ_NONE; } - acks = le32_to_cpu(acks); + acks = le32_to_cpu(val); while (acks) { int i = __ffs(acks); diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index f33567bc428d..b55b1d5d6955 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -1,7 +1,7 @@ /* * Core functions for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65912-i2c.c b/drivers/mfd/tps65912-i2c.c index 785d19f6f7c9..f7c22ea7b36c 100644 --- a/drivers/mfd/tps65912-i2c.c +++ b/drivers/mfd/tps65912-i2c.c @@ -1,7 +1,7 @@ /* * I2C access driver for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c index f78be039e463..21a8d6ac5c4a 100644 --- a/drivers/mfd/tps65912-spi.c +++ b/drivers/mfd/tps65912-spi.c @@ -1,7 +1,7 @@ /* * SPI access driver for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 910a304b397c..ab417438d1fa 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -477,7 +477,7 @@ static void twl4030_sih_bus_sync_unlock(struct irq_data *data) if (agent->imr_change_pending) { union { - u32 word; + __le32 word; u8 bytes[4]; } imr; @@ -561,7 +561,7 @@ static inline int sih_read_isr(const struct sih *sih) int status; union { u8 bytes[4]; - u32 word; + __le32 word; } isr; /* FIXME need retry-on-error ... */ diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 02f879b23d9f..b0344e5353e4 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -114,6 +114,8 @@ static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) * The WM831x has a user key preventing writes to particularly * critical registers. This function locks those registers, * allowing writes to them. + * + * @wm831x: pointer to local driver data structure */ void wm831x_reg_lock(struct wm831x *wm831x) { @@ -140,6 +142,8 @@ EXPORT_SYMBOL_GPL(wm831x_reg_lock); * The WM831x has a user key preventing writes to particularly * critical registers. This function locks those registers, * preventing spurious writes. + * + * @wm831x: pointer to local driver data structure */ int wm831x_reg_unlock(struct wm831x *wm831x) { diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 42b16503e6cd..fbc77b218215 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -131,6 +131,8 @@ EXPORT_SYMBOL_GPL(wm8350_block_write); * The WM8350 has a hardware lock which can be used to prevent writes to * some registers (generally those which can cause particularly serious * problems if misused). This function enables that lock. + * + * @wm8350: pointer to local driver data structure */ int wm8350_reg_lock(struct wm8350 *wm8350) { @@ -160,6 +162,8 @@ EXPORT_SYMBOL_GPL(wm8350_reg_lock); * problems if misused). This function disables that lock so updates * can be performed. For maximum safety this should be done only when * required. + * + * @wm8350: pointer to local driver data structure */ int wm8350_reg_unlock(struct wm8350 *wm8350) { diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 3055d6f47afc..0fe32a05421b 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -108,6 +108,8 @@ static const struct regmap_config wm8400_regmap_config = { /** * wm8400_reset_codec_reg_cache - Reset cached codec registers to * their default values. + * + * @wm8400: pointer to local driver data structure */ void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400) { diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a2e710d46432..b668224f906d 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -499,4 +499,15 @@ config SPRD_THERMAL help Support for the Spreadtrum thermal sensor driver in the Linux thermal framework. + +config KHADAS_MCU_FAN_THERMAL + tristate "Khadas MCU controller FAN cooling support" + depends on OF || COMPILE_TEST + depends on MFD_KHADAS_MCU + select MFD_CORE + select REGMAP + help + If you say yes here you get support for the FAN controlled + by the Microcontroller found on the Khadas VIM boards. + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index b8d96d26f9ec..b64dd50a6629 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -61,3 +61,4 @@ obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o +obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c new file mode 100644 index 000000000000..9eadd2d6413e --- /dev/null +++ b/drivers/thermal/khadas_mcu_fan.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Khadas MCU Controlled FAN driver + * + * Copyright (C) 2020 BayLibre SAS + * Author(s): Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/mfd/khadas-mcu.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/thermal.h> + +#define MAX_LEVEL 3 + +struct khadas_mcu_fan_ctx { + struct khadas_mcu *mcu; + unsigned int level; + struct thermal_cooling_device *cdev; +}; + +static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx, + unsigned int level) +{ + int ret; + + ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG, + level); + if (ret) + return ret; + + ctx->level = level; + + return 0; +} + +static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = MAX_LEVEL; + + return 0; +} + +static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct khadas_mcu_fan_ctx *ctx = cdev->devdata; + + *state = ctx->level; + + return 0; +} + +static int +khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct khadas_mcu_fan_ctx *ctx = cdev->devdata; + + if (state > MAX_LEVEL) + return -EINVAL; + + if (state == ctx->level) + return 0; + + return khadas_mcu_fan_set_level(ctx, state); +} + +static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = { + .get_max_state = khadas_mcu_fan_get_max_state, + .get_cur_state = khadas_mcu_fan_get_cur_state, + .set_cur_state = khadas_mcu_fan_set_cur_state, +}; + +static int khadas_mcu_fan_probe(struct platform_device *pdev) +{ + struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + struct thermal_cooling_device *cdev; + struct device *dev = &pdev->dev; + struct khadas_mcu_fan_ctx *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + ctx->mcu = mcu; + platform_set_drvdata(pdev, ctx); + + cdev = devm_thermal_of_cooling_device_register(dev->parent, + dev->parent->of_node, "khadas-mcu-fan", ctx, + &khadas_mcu_fan_cooling_ops); + if (IS_ERR(cdev)) { + ret = PTR_ERR(cdev); + dev_err(dev, "Failed to register khadas-mcu-fan as cooling device: %d\n", + ret); + return ret; + } + ctx->cdev = cdev; + thermal_cdev_update(cdev); + + return 0; +} + +static void khadas_mcu_fan_shutdown(struct platform_device *pdev) +{ + struct khadas_mcu_fan_ctx *ctx = platform_get_drvdata(pdev); + + khadas_mcu_fan_set_level(ctx, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int khadas_mcu_fan_suspend(struct device *dev) +{ + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev); + unsigned int level_save = ctx->level; + int ret; + + ret = khadas_mcu_fan_set_level(ctx, 0); + if (ret) + return ret; + + ctx->level = level_save; + + return 0; +} + +static int khadas_mcu_fan_resume(struct device *dev) +{ + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev); + + return khadas_mcu_fan_set_level(ctx, ctx->level); +} +#endif + +static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend, + khadas_mcu_fan_resume); + +static const struct platform_device_id khadas_mcu_fan_id_table[] = { + { .name = "khadas-mcu-fan-ctrl", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table); + +static struct platform_driver khadas_mcu_fan_driver = { + .probe = khadas_mcu_fan_probe, + .shutdown = khadas_mcu_fan_shutdown, + .driver = { + .name = "khadas-mcu-fan-ctrl", + .pm = &khadas_mcu_fan_pm, + }, + .id_table = khadas_mcu_fan_id_table, +}; + +module_platform_driver(khadas_mcu_fan_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Khadas MCU FAN driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index ab76cdd06199..4b35baa14d30 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -14,7 +14,7 @@ #define MFD_RES_SIZE(arr) (sizeof(arr) / sizeof(struct resource)) -#define MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _match)\ +#define MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg, _use_of_reg, _match) \ { \ .name = (_name), \ .resources = (_res), \ @@ -22,24 +22,32 @@ .platform_data = (_pdata), \ .pdata_size = (_pdsize), \ .of_compatible = (_compat), \ + .of_reg = (_of_reg), \ + .use_of_reg = (_use_of_reg), \ .acpi_match = (_match), \ .id = (_id), \ } -#define OF_MFD_CELL(_name, _res, _pdata, _pdsize,_id, _compat) \ - MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, NULL) \ +#define OF_MFD_CELL_REG(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg) \ + MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg, true, NULL) -#define ACPI_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _match) \ - MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, _match) \ +#define OF_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _compat) \ + MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, 0, false, NULL) -#define MFD_CELL_BASIC(_name, _res, _pdata, _pdsize, _id) \ - MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, NULL) \ +#define ACPI_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _match) \ + MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, 0, false, _match) -#define MFD_CELL_RES(_name, _res) \ - MFD_CELL_ALL(_name, _res, NULL, 0, 0, NULL, NULL) \ +#define MFD_CELL_BASIC(_name, _res, _pdata, _pdsize, _id) \ + MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, 0, false, NULL) -#define MFD_CELL_NAME(_name) \ - MFD_CELL_ALL(_name, NULL, NULL, 0, 0, NULL, NULL) \ +#define MFD_CELL_RES(_name, _res) \ + MFD_CELL_ALL(_name, _res, NULL, 0, 0, NULL, 0, false, NULL) + +#define MFD_CELL_NAME(_name) \ + MFD_CELL_ALL(_name, NULL, NULL, 0, 0, NULL, 0, false, NULL) + +#define MFD_DEP_LEVEL_NORMAL 0 +#define MFD_DEP_LEVEL_HIGH 1 struct irq_domain; struct property_entry; @@ -58,6 +66,7 @@ struct mfd_cell_acpi_match { struct mfd_cell { const char *name; int id; + int level; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); @@ -78,6 +87,16 @@ struct mfd_cell { */ const char *of_compatible; + /* + * Address as defined in Device Tree. Used to compement 'of_compatible' + * (above) when matching OF nodes with devices that have identical + * compatible strings + */ + const u64 of_reg; + + /* Set to 'true' to use 'of_reg' (above) - allows for of_reg=0 */ + bool use_of_reg; + /* Matches ACPI */ const struct mfd_cell_acpi_match *acpi_match; @@ -135,6 +154,7 @@ static inline int mfd_add_hotplug_devices(struct device *parent, } extern void mfd_remove_devices(struct device *parent); +extern void mfd_remove_devices_late(struct device *parent); extern int devm_mfd_add_devices(struct device *dev, int id, const struct mfd_cell *cells, int n_devs, diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index eac48e483190..d3f126990ad0 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -35,7 +35,7 @@ struct da9055_pdata { int *gpio_rsel; /* * Regulator mode control bits value (GPI offset) that - * that controls the regulator state, 0 if not available. + * controls the regulator state, 0 if not available. */ enum gpio_select *reg_ren; /* diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h index 5cd06ab26352..fa7a43f02f27 100644 --- a/include/linux/mfd/da9063/core.h +++ b/include/linux/mfd/da9063/core.h @@ -35,6 +35,7 @@ enum da9063_variant_codes { PMIC_DA9063_AD = 0x3, PMIC_DA9063_BB = 0x5, PMIC_DA9063_CA = 0x6, + PMIC_DA9063_DA = 0x7, }; /* Interrupts */ diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index ba706b0e28c2..1dbabf1b3cb8 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -292,8 +292,10 @@ #define DA9063_BB_REG_GP_ID_19 0x134 /* Chip ID and variant */ -#define DA9063_REG_CHIP_ID 0x181 -#define DA9063_REG_CHIP_VARIANT 0x182 +#define DA9063_REG_DEVICE_ID 0x181 +#define DA9063_REG_VARIANT_ID 0x182 +#define DA9063_REG_CUSTOMER_ID 0x183 +#define DA9063_REG_CONFIG_ID 0x184 /* * PMIC registers bits @@ -929,9 +931,6 @@ #define DA9063_RTC_CLOCK 0x40 #define DA9063_OUT_32K_EN 0x80 -/* DA9063_REG_CHIP_VARIANT */ -#define DA9063_CHIP_VARIANT_SHIFT 4 - /* DA9063_REG_BUCK_ILIM_A (addr=0x9A) */ #define DA9063_BIO_ILIM_MASK 0x0F #define DA9063_BMEM_ILIM_MASK 0xF0 @@ -1065,4 +1064,10 @@ #define DA9063_MON_A10_IDX_LDO9 0x04 #define DA9063_MON_A10_IDX_LDO10 0x05 +/* DA9063_REG_VARIANT_ID (addr=0x182) */ +#define DA9063_VARIANT_ID_VRC_SHIFT 0 +#define DA9063_VARIANT_ID_VRC_MASK 0x0F +#define DA9063_VARIANT_ID_MRC_SHIFT 4 +#define DA9063_VARIANT_ID_MRC_MASK 0xF0 + #endif /* _DA9063_REG_H */ diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h index bbc64484c021..2cadf8897c64 100644 --- a/include/linux/mfd/hi6421-pmic.h +++ b/include/linux/mfd/hi6421-pmic.h @@ -5,7 +5,7 @@ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd. * http://www.hisilicon.com * Copyright (c) <2013-2014> Linaro Ltd. - * http://www.linaro.org + * https://www.linaro.org * * Author: Guodong Xu <guodong.xu@linaro.org> */ diff --git a/include/linux/mfd/khadas-mcu.h b/include/linux/mfd/khadas-mcu.h new file mode 100644 index 000000000000..a99ba2ed0e4e --- /dev/null +++ b/include/linux/mfd/khadas-mcu.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Khadas System control Microcontroller Register map + * + * Copyright (C) 2020 BayLibre SAS + * + * Author(s): Neil Armstrong <narmstrong@baylibre.com> + */ + +#ifndef MFD_KHADAS_MCU_H +#define MFD_KHADAS_MCU_H + +#define KHADAS_MCU_PASSWD_VEN_0_REG 0x00 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_1_REG 0x01 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_2_REG 0x02 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_3_REG 0x03 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_4_REG 0x04 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_5_REG 0x05 /* RO */ +#define KHADAS_MCU_MAC_0_REG 0x06 /* RO */ +#define KHADAS_MCU_MAC_1_REG 0x07 /* RO */ +#define KHADAS_MCU_MAC_2_REG 0x08 /* RO */ +#define KHADAS_MCU_MAC_3_REG 0x09 /* RO */ +#define KHADAS_MCU_MAC_4_REG 0x0a /* RO */ +#define KHADAS_MCU_MAC_5_REG 0x0b /* RO */ +#define KHADAS_MCU_USID_0_REG 0x0c /* RO */ +#define KHADAS_MCU_USID_1_REG 0x0d /* RO */ +#define KHADAS_MCU_USID_2_REG 0x0e /* RO */ +#define KHADAS_MCU_USID_3_REG 0x0f /* RO */ +#define KHADAS_MCU_USID_4_REG 0x10 /* RO */ +#define KHADAS_MCU_USID_5_REG 0x11 /* RO */ +#define KHADAS_MCU_VERSION_0_REG 0x12 /* RO */ +#define KHADAS_MCU_VERSION_1_REG 0x13 /* RO */ +#define KHADAS_MCU_DEVICE_NO_0_REG 0x14 /* RO */ +#define KHADAS_MCU_DEVICE_NO_1_REG 0x15 /* RO */ +#define KHADAS_MCU_FACTORY_TEST_REG 0x16 /* R */ +#define KHADAS_MCU_BOOT_MODE_REG 0x20 /* RW */ +#define KHADAS_MCU_BOOT_EN_WOL_REG 0x21 /* RW */ +#define KHADAS_MCU_BOOT_EN_RTC_REG 0x22 /* RW */ +#define KHADAS_MCU_BOOT_EN_EXP_REG 0x23 /* RW */ +#define KHADAS_MCU_BOOT_EN_IR_REG 0x24 /* RW */ +#define KHADAS_MCU_BOOT_EN_DCIN_REG 0x25 /* RW */ +#define KHADAS_MCU_BOOT_EN_KEY_REG 0x26 /* RW */ +#define KHADAS_MCU_KEY_MODE_REG 0x27 /* RW */ +#define KHADAS_MCU_LED_MODE_ON_REG 0x28 /* RW */ +#define KHADAS_MCU_LED_MODE_OFF_REG 0x29 /* RW */ +#define KHADAS_MCU_SHUTDOWN_NORMAL_REG 0x2c /* RW */ +#define KHADAS_MCU_MAC_SWITCH_REG 0x2d /* RW */ +#define KHADAS_MCU_MCU_SLEEP_MODE_REG 0x2e /* RW */ +#define KHADAS_MCU_IR_CODE1_0_REG 0x2f /* RW */ +#define KHADAS_MCU_IR_CODE1_1_REG 0x30 /* RW */ +#define KHADAS_MCU_IR_CODE1_2_REG 0x31 /* RW */ +#define KHADAS_MCU_IR_CODE1_3_REG 0x32 /* RW */ +#define KHADAS_MCU_USB_PCIE_SWITCH_REG 0x33 /* RW */ +#define KHADAS_MCU_IR_CODE2_0_REG 0x34 /* RW */ +#define KHADAS_MCU_IR_CODE2_1_REG 0x35 /* RW */ +#define KHADAS_MCU_IR_CODE2_2_REG 0x36 /* RW */ +#define KHADAS_MCU_IR_CODE2_3_REG 0x37 /* RW */ +#define KHADAS_MCU_PASSWD_USER_0_REG 0x40 /* RW */ +#define KHADAS_MCU_PASSWD_USER_1_REG 0x41 /* RW */ +#define KHADAS_MCU_PASSWD_USER_2_REG 0x42 /* RW */ +#define KHADAS_MCU_PASSWD_USER_3_REG 0x43 /* RW */ +#define KHADAS_MCU_PASSWD_USER_4_REG 0x44 /* RW */ +#define KHADAS_MCU_PASSWD_USER_5_REG 0x45 /* RW */ +#define KHADAS_MCU_USER_DATA_0_REG 0x46 /* RW 56 bytes */ +#define KHADAS_MCU_PWR_OFF_CMD_REG 0x80 /* WO */ +#define KHADAS_MCU_PASSWD_START_REG 0x81 /* WO */ +#define KHADAS_MCU_CHECK_VEN_PASSWD_REG 0x82 /* WO */ +#define KHADAS_MCU_CHECK_USER_PASSWD_REG 0x83 /* WO */ +#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG 0x86 /* RO */ +#define KHADAS_MCU_WOL_INIT_START_REG 0x87 /* WO */ +#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG 0x88 /* WO */ + +enum { + KHADAS_BOARD_VIM1 = 0x1, + KHADAS_BOARD_VIM2, + KHADAS_BOARD_VIM3, + KHADAS_BOARD_EDGE = 0x11, + KHADAS_BOARD_EDGE_V, +}; + +/** + * struct khadas_mcu - Khadas MCU structure + * @device: device reference used for logs + * @regmap: register map + */ +struct khadas_mcu { + struct device *dev; + struct regmap *regmap; +}; + +#endif /* MFD_KHADAS_MCU_H */ diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h index edbec8350a49..5546688c7da7 100644 --- a/include/linux/mfd/lp873x.h +++ b/include/linux/mfd/lp873x.h @@ -1,7 +1,7 @@ /* * Functions to access LP873X power management chip. * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h index ce965354bbad..43716aca46fa 100644 --- a/include/linux/mfd/lp87565.h +++ b/include/linux/mfd/lp87565.h @@ -2,7 +2,7 @@ /* * Functions to access LP87565 power management chip. * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef __LINUX_MFD_LP87565_H diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h index fa9595dd42ba..601cbbc10370 100644 --- a/include/linux/mfd/madera/pdata.h +++ b/include/linux/mfd/madera/pdata.h @@ -21,7 +21,6 @@ struct gpio_desc; struct pinctrl_map; -struct madera_codec_pdata; /** * struct madera_pdata - Configuration data for Madera devices diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index e798c81aec31..311f7d3d2323 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -131,7 +131,7 @@ enum max77693_pmic_reg { #define FLASH_INT_FLED1_SHORT BIT(3) #define FLASH_INT_OVER_CURRENT BIT(4) -/* Fast charge timer in in hours */ +/* Fast charge timer in hours */ #define DEFAULT_FAST_CHARGE_TIMER 4 /* microamps */ #define DEFAULT_TOP_OFF_THRESHOLD_CURRENT 150000 diff --git a/include/linux/mfd/smsc.h b/include/linux/mfd/smsc.h deleted file mode 100644 index 83944124e886..000000000000 --- a/include/linux/mfd/smsc.h +++ /dev/null @@ -1,104 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * SMSC ECE1099 - * - * Copyright 2012 Texas Instruments Inc. - * - * Author: Sourav Poddar <sourav.poddar@ti.com> - */ - -#ifndef __LINUX_MFD_SMSC_H -#define __LINUX_MFD_SMSC_H - -#include <linux/regmap.h> - -#define SMSC_ID_ECE1099 1 -#define SMSC_NUM_CLIENTS 2 - -#define SMSC_BASE_ADDR 0x38 -#define OMAP_GPIO_SMSC_IRQ 151 - -#define SMSC_MAXGPIO 32 -#define SMSC_BANK(offs) ((offs) >> 3) -#define SMSC_BIT(offs) (1u << ((offs) & 0x7)) - -struct smsc { - struct device *dev; - struct i2c_client *i2c_clients[SMSC_NUM_CLIENTS]; - struct regmap *regmap; - int clk; - /* Stored chip id */ - int id; -}; - -struct smsc_gpio; -struct smsc_keypad; - -static inline int smsc_read(struct device *child, unsigned int reg, - unsigned int *dest) -{ - struct smsc *smsc = dev_get_drvdata(child->parent); - - return regmap_read(smsc->regmap, reg, dest); -} - -static inline int smsc_write(struct device *child, unsigned int reg, - unsigned int value) -{ - struct smsc *smsc = dev_get_drvdata(child->parent); - - return regmap_write(smsc->regmap, reg, value); -} - -/* Registers for SMSC */ -#define SMSC_RESET 0xF5 -#define SMSC_GRP_INT 0xF9 -#define SMSC_CLK_CTRL 0xFA -#define SMSC_WKUP_CTRL 0xFB -#define SMSC_DEV_ID 0xFC -#define SMSC_DEV_REV 0xFD -#define SMSC_VEN_ID_L 0xFE -#define SMSC_VEN_ID_H 0xFF - -/* CLK VALUE */ -#define SMSC_CLK_VALUE 0x13 - -/* Registers for function GPIO INPUT */ -#define SMSC_GPIO_DATA_IN_START 0x00 - -/* Registers for function GPIO OUPUT */ -#define SMSC_GPIO_DATA_OUT_START 0x05 - -/* Definitions for SMSC GPIO CONFIGURATION REGISTER*/ -#define SMSC_GPIO_INPUT_LOW 0x01 -#define SMSC_GPIO_INPUT_RISING 0x09 -#define SMSC_GPIO_INPUT_FALLING 0x11 -#define SMSC_GPIO_INPUT_BOTH_EDGE 0x19 -#define SMSC_GPIO_OUTPUT_PP 0x21 -#define SMSC_GPIO_OUTPUT_OP 0x31 - -#define GRP_INT_STAT 0xf9 -#define SMSC_GPI_INT 0x0f -#define SMSC_CFG_START 0x0A - -/* Registers for SMSC GPIO INTERRUPT STATUS REGISTER*/ -#define SMSC_GPIO_INT_STAT_START 0x32 - -/* Registers for SMSC GPIO INTERRUPT MASK REGISTER*/ -#define SMSC_GPIO_INT_MASK_START 0x37 - -/* Registers for SMSC function KEYPAD*/ -#define SMSC_KP_OUT 0x40 -#define SMSC_KP_IN 0x41 -#define SMSC_KP_INT_STAT 0x42 -#define SMSC_KP_INT_MASK 0x43 - -/* Definitions for keypad */ -#define SMSC_KP_KSO 0x70 -#define SMSC_KP_KSI 0x51 -#define SMSC_KSO_ALL_LOW 0x20 -#define SMSC_KP_SET_LOW_PWR 0x0B -#define SMSC_KP_SET_HIGH 0xFF -#define SMSC_KSO_EVAL 0x00 - -#endif /* __LINUX_MFD_SMSC_H */ diff --git a/include/linux/mfd/stm32-lptimer.h b/include/linux/mfd/stm32-lptimer.h index 605f62264825..90b20550c1c8 100644 --- a/include/linux/mfd/stm32-lptimer.h +++ b/include/linux/mfd/stm32-lptimer.h @@ -27,10 +27,15 @@ #define STM32_LPTIM_CMPOK BIT(3) /* STM32_LPTIM_ICR - bit fields */ +#define STM32_LPTIM_ARRMCF BIT(1) #define STM32_LPTIM_CMPOKCF_ARROKCF GENMASK(4, 3) +/* STM32_LPTIM_IER - bit flieds */ +#define STM32_LPTIM_ARRMIE BIT(1) + /* STM32_LPTIM_CR - bit fields */ #define STM32_LPTIM_CNTSTRT BIT(2) +#define STM32_LPTIM_SNGSTRT BIT(1) #define STM32_LPTIM_ENABLE BIT(0) /* STM32_LPTIM_CFGR - bit fields */ diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 483168403ae5..ffc091b77633 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -4,7 +4,7 @@ /* * TI Touch Screen / ADC MFD driver * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h index a228ae4c88d9..e0a417e53766 100644 --- a/include/linux/mfd/tps65086.h +++ b/include/linux/mfd/tps65086.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index b5dd108421c8..db7091824ed0 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -3,7 +3,7 @@ * * Functions to access TPS65217 power management chip. * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index b0470c35162d..f4ca367e3473 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -3,7 +3,7 @@ * * Functions to access TPS65219 power management chip. * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h index b25d0297ba88..7943e413deae 100644 --- a/include/linux/mfd/tps65912.h +++ b/include/linux/mfd/tps65912.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or |