summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/rtc/maxim,mcp795.txt11
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/rtc/rtc-abx80x.c252
-rw-r--r--drivers/rtc/rtc-asm9260.c4
-rw-r--r--drivers/rtc/rtc-m41t80.c6
-rw-r--r--drivers/rtc/rtc-mcp795.c10
-rw-r--r--drivers/rtc/rtc-rv8803.c28
-rw-r--r--drivers/rtc/rtc-s3c.c19
8 files changed, 316 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt
new file mode 100644
index 000000000000..a59fdd8c236d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt
@@ -0,0 +1,11 @@
+* Maxim MCP795 SPI Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "maxim,mcp795".
+- reg: SPI address for chip
+
+Example:
+ mcp795: rtc@0 {
+ compatible = "maxim,mcp795";
+ reg = <0>;
+ };
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 544bd3493852..3e84315c6f12 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -589,7 +589,7 @@ config RTC_DRV_RV3029_HWMON
default y
help
Say Y here if you want to expose temperature sensor data on
- rtc-rv3029c2.
+ rtc-rv3029.
config RTC_DRV_RV8803
tristate "Micro Crystal RV8803"
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index d41bbcd653f6..ba0d61934d35 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -49,7 +49,20 @@
#define ABX8XX_REG_CD_TIMER_CTL 0x18
+#define ABX8XX_REG_OSC 0x1c
+#define ABX8XX_OSC_FOS BIT(3)
+#define ABX8XX_OSC_BOS BIT(4)
+#define ABX8XX_OSC_ACAL_512 BIT(5)
+#define ABX8XX_OSC_ACAL_1024 BIT(6)
+
+#define ABX8XX_OSC_OSEL BIT(7)
+
+#define ABX8XX_REG_OSS 0x1d
+#define ABX8XX_OSS_OF BIT(1)
+#define ABX8XX_OSS_OMODE BIT(4)
+
#define ABX8XX_REG_CFG_KEY 0x1f
+#define ABX8XX_CFG_KEY_OSC 0xa1
#define ABX8XX_CFG_KEY_MISC 0x9d
#define ABX8XX_REG_ID0 0x28
@@ -81,6 +94,20 @@ static struct abx80x_cap abx80x_caps[] = {
[ABX80X] = {.pn = 0}
};
+static int abx80x_is_rc_mode(struct i2c_client *client)
+{
+ int flags = 0;
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0) {
+ dev_err(&client->dev,
+ "Failed to read autocalibration attribute\n");
+ return flags;
+ }
+
+ return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
+}
+
static int abx80x_enable_trickle_charger(struct i2c_client *client,
u8 trickle_cfg)
{
@@ -112,7 +139,23 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8];
- int err;
+ int err, flags, rc_mode = 0;
+
+ /* Read the Oscillator Failure only in XT mode */
+ rc_mode = abx80x_is_rc_mode(client);
+ if (rc_mode < 0)
+ return rc_mode;
+
+ if (!rc_mode) {
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0)
+ return flags;
+
+ if (flags & ABX8XX_OSS_OF) {
+ dev_err(dev, "Oscillator failure, data is invalid.\n");
+ return -EINVAL;
+ }
+ }
err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
sizeof(buf), buf);
@@ -140,7 +183,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8];
- int err;
+ int err, flags;
if (tm->tm_year < 100)
return -EINVAL;
@@ -161,6 +204,18 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
return -EIO;
}
+ /* Clear the OF bit of Oscillator Status Register */
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0)
+ return flags;
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
+ flags & ~ABX8XX_OSS_OF);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write oscillator status register\n");
+ return err;
+ }
+
return 0;
}
@@ -248,6 +303,174 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0;
}
+static int abx80x_rtc_set_autocalibration(struct device *dev,
+ int autocalibration)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int retval, flags = 0;
+
+ if ((autocalibration != 0) && (autocalibration != 1024) &&
+ (autocalibration != 512)) {
+ dev_err(dev, "autocalibration value outside permitted range\n");
+ return -EINVAL;
+ }
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (autocalibration == 0) {
+ flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
+ } else if (autocalibration == 1024) {
+ /* 1024 autocalibration is 0x10 */
+ flags |= ABX8XX_OSC_ACAL_1024;
+ flags &= ~(ABX8XX_OSC_ACAL_512);
+ } else {
+ /* 512 autocalibration is 0x11 */
+ flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
+ }
+
+ /* Unlock write access to Oscillator Control Register */
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_OSC);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write CONFIG_KEY register\n");
+ return retval;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+
+ return retval;
+}
+
+static int abx80x_rtc_get_autocalibration(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int flags = 0, autocalibration;
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (flags & ABX8XX_OSC_ACAL_512)
+ autocalibration = 512;
+ else if (flags & ABX8XX_OSC_ACAL_1024)
+ autocalibration = 1024;
+ else
+ autocalibration = 0;
+
+ return autocalibration;
+}
+
+static ssize_t autocalibration_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int retval;
+ unsigned long autocalibration = 0;
+
+ retval = kstrtoul(buf, 10, &autocalibration);
+ if (retval < 0) {
+ dev_err(dev, "Failed to store RTC autocalibration attribute\n");
+ return -EINVAL;
+ }
+
+ retval = abx80x_rtc_set_autocalibration(dev, autocalibration);
+
+ return retval ? retval : count;
+}
+
+static ssize_t autocalibration_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int autocalibration = 0;
+
+ autocalibration = abx80x_rtc_get_autocalibration(dev);
+ if (autocalibration < 0) {
+ dev_err(dev, "Failed to read RTC autocalibration\n");
+ sprintf(buf, "0\n");
+ return autocalibration;
+ }
+
+ return sprintf(buf, "%d\n", autocalibration);
+}
+
+static DEVICE_ATTR_RW(autocalibration);
+
+static ssize_t oscillator_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int retval, flags, rc_mode = 0;
+
+ if (strncmp(buf, "rc", 2) == 0) {
+ rc_mode = 1;
+ } else if (strncmp(buf, "xtal", 4) == 0) {
+ rc_mode = 0;
+ } else {
+ dev_err(dev, "Oscillator selection value outside permitted ones\n");
+ return -EINVAL;
+ }
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (rc_mode == 0)
+ flags &= ~(ABX8XX_OSC_OSEL);
+ else
+ flags |= (ABX8XX_OSC_OSEL);
+
+ /* Unlock write access on Oscillator Control register */
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_OSC);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write CONFIG_KEY register\n");
+ return retval;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write Oscillator Control register\n");
+ return retval;
+ }
+
+ return retval ? retval : count;
+}
+
+static ssize_t oscillator_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int rc_mode = 0;
+ struct i2c_client *client = to_i2c_client(dev);
+
+ rc_mode = abx80x_is_rc_mode(client);
+
+ if (rc_mode < 0) {
+ dev_err(dev, "Failed to read RTC oscillator selection\n");
+ sprintf(buf, "\n");
+ return rc_mode;
+ }
+
+ if (rc_mode)
+ return sprintf(buf, "rc\n");
+ else
+ return sprintf(buf, "xtal\n");
+}
+
+static DEVICE_ATTR_RW(oscillator);
+
+static struct attribute *rtc_calib_attrs[] = {
+ &dev_attr_autocalibration.attr,
+ &dev_attr_oscillator.attr,
+ NULL,
+};
+
+static const struct attribute_group rtc_calib_attr_group = {
+ .attrs = rtc_calib_attrs,
+};
+
static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -303,6 +526,13 @@ static int abx80x_dt_trickle_cfg(struct device_node *np)
return (trickle_cfg | i);
}
+static void rtc_calib_remove_sysfs_group(void *_dev)
+{
+ struct device *dev = _dev;
+
+ sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
+}
+
static int abx80x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -405,6 +635,24 @@ static int abx80x_probe(struct i2c_client *client,
}
}
+ /* Export sysfs entries */
+ err = sysfs_create_group(&(&client->dev)->kobj, &rtc_calib_attr_group);
+ if (err) {
+ dev_err(&client->dev, "Failed to create sysfs group: %d\n",
+ err);
+ return err;
+ }
+
+ err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
+ &client->dev);
+ if (err) {
+ rtc_calib_remove_sysfs_group(&client->dev);
+ dev_err(&client->dev,
+ "Failed to add sysfs cleanup action: %d\n",
+ err);
+ return err;
+ }
+
return 0;
}
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
index 14e08c4c1a01..355fdb97a006 100644
--- a/drivers/rtc/rtc-asm9260.c
+++ b/drivers/rtc/rtc-asm9260.c
@@ -255,7 +255,7 @@ static const struct rtc_class_ops asm9260_rtc_ops = {
.alarm_irq_enable = asm9260_alarm_irq_enable,
};
-static int __init asm9260_rtc_probe(struct platform_device *pdev)
+static int asm9260_rtc_probe(struct platform_device *pdev)
{
struct asm9260_rtc_priv *priv;
struct device *dev = &pdev->dev;
@@ -323,7 +323,7 @@ err_return:
return ret;
}
-static int __exit asm9260_rtc_remove(struct platform_device *pdev)
+static int asm9260_rtc_remove(struct platform_device *pdev)
{
struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index a82937e2f824..d107a8e72a7d 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -176,7 +176,13 @@ static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm)
bin2bcd(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f);
buf[M41T80_REG_MON] =
bin2bcd(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f);
+
/* assume 20YY not 19YY */
+ if (tm->tm_year < 100 || tm->tm_year > 199) {
+ dev_err(&client->dev, "Year must be between 2000 and 2099. It's %d.\n",
+ tm->tm_year + 1900);
+ return -EINVAL;
+ }
buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100);
if (i2c_transfer(client->adapter, msgs, 1) != 1) {
diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
index 1c91ce8a6d75..025bb33b9cd2 100644
--- a/drivers/rtc/rtc-mcp795.c
+++ b/drivers/rtc/rtc-mcp795.c
@@ -20,6 +20,7 @@
#include <linux/printk.h>
#include <linux/spi/spi.h>
#include <linux/rtc.h>
+#include <linux/of.h>
/* MCP795 Instructions, see datasheet table 3-1 */
#define MCP795_EEREAD 0x03
@@ -183,9 +184,18 @@ static int mcp795_probe(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id mcp795_of_match[] = {
+ { .compatible = "maxim,mcp795" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mcp795_of_match);
+#endif
+
static struct spi_driver mcp795_driver = {
.driver = {
.name = "rtc-mcp795",
+ .of_match_table = of_match_ptr(mcp795_of_match),
},
.probe = mcp795_probe,
};
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 8d9f35ceb808..f623038e586e 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -61,11 +61,14 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
struct i2c_client *client = dev_id;
struct rv8803_data *rv8803 = i2c_get_clientdata(client);
unsigned long events = 0;
- int flags;
+ int flags, try = 0;
mutex_lock(&rv8803->flags_lock);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ do {
+ flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ try++;
+ } while ((flags == -ENXIO) && (try < 3));
if (flags <= 0) {
mutex_unlock(&rv8803->flags_lock);
return IRQ_NONE;
@@ -424,7 +427,7 @@ static int rv8803_probe(struct i2c_client *client,
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct rv8803_data *rv8803;
- int err, flags;
+ int err, flags, try = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK)) {
@@ -441,7 +444,16 @@ static int rv8803_probe(struct i2c_client *client,
rv8803->client = client;
i2c_set_clientdata(client, rv8803);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ /*
+ * There is a 60µs window where the RTC may not reply on the i2c bus in
+ * that case, the transfer is not ACKed. In that case, ensure there are
+ * multiple attempts.
+ */
+ do {
+ flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ try++;
+ } while ((flags == -ENXIO) && (try < 3));
+
if (flags < 0)
return flags;
@@ -476,8 +488,12 @@ static int rv8803_probe(struct i2c_client *client,
return PTR_ERR(rv8803->rtc);
}
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
- RV8803_EXT_WADA);
+ try = 0;
+ do {
+ err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
+ RV8803_EXT_WADA);
+ try++;
+ } while ((err == -ENXIO) && (try < 3));
if (err)
return err;
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index ffb860d18701..d01ad7e8078e 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(info->rtc_clk)) {
- dev_err(&pdev->dev, "failed to find rtc clock\n");
- return PTR_ERR(info->rtc_clk);
+ ret = PTR_ERR(info->rtc_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to find rtc clock\n");
+ else
+ dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
+ return ret;
}
clk_prepare_enable(info->rtc_clk);
if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
if (IS_ERR(info->rtc_src_clk)) {
- dev_err(&pdev->dev,
- "failed to find rtc source clock\n");
+ ret = PTR_ERR(info->rtc_src_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to find rtc source clock\n");
+ else
+ dev_dbg(&pdev->dev,
+ "probe deferred due to missing rtc src clk\n");
clk_disable_unprepare(info->rtc_clk);
- return PTR_ERR(info->rtc_src_clk);
+ return ret;
}
clk_prepare_enable(info->rtc_src_clk);
}
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-24 15:26:16 +0000