Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

8 files changed, 850 insertions, 26 deletions

diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index fc7aae64dcde..331dc377c275 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -231,6 +231,7 @@ struct hid_sensor_common {
 	unsigned usage_id;
 	atomic_t data_ready;
 	atomic_t user_requested_state;
+	atomic_t runtime_pm_enable;
 	int poll_interval;
 	int raw_hystersis;
 	int latency_ms;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 7b0fa8b5c120..f9bd6e8ab138 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -131,28 +131,39 @@ struct st_sensor_das {
 };
 
 /**
+ * struct st_sensor_int_drdy - ST sensor device drdy line parameters
+ * @addr: address of INT drdy register.
+ * @mask: mask to enable drdy line.
+ * @addr_od: address to enable/disable Open Drain on the INT line.
+ * @mask_od: mask to enable/disable Open Drain on the INT line.
+ */
+struct st_sensor_int_drdy {
+	u8 addr;
+	u8 mask;
+	u8 addr_od;
+	u8 mask_od;
+};
+
+/**
  * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
- * @addr: address of the register.
- * @mask_int1: mask to enable/disable IRQ on INT1 pin.
- * @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * struct int1 - data-ready configuration register for INT1 pin.
+ * struct int2 - data-ready configuration register for INT2 pin.
  * @addr_ihl: address to enable/disable active low on the INT lines.
  * @mask_ihl: mask to enable/disable active low on the INT lines.
- * @addr_od: address to enable/disable Open Drain on the INT lines.
- * @mask_od: mask to enable/disable Open Drain on the INT lines.
- * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt
+ * struct stat_drdy - status register of DRDY (data ready) interrupt.
  * struct ig1 - represents the Interrupt Generator 1 of sensors.
  * @en_addr: address of the enable ig1 register.
  * @en_mask: mask to write the on/off value for enable.
  */
 struct st_sensor_data_ready_irq {
-	u8 addr;
-	u8 mask_int1;
-	u8 mask_int2;
+	struct st_sensor_int_drdy int1;
+	struct st_sensor_int_drdy int2;
 	u8 addr_ihl;
 	u8 mask_ihl;
-	u8 addr_od;
-	u8 mask_od;
-	u8 addr_stat_drdy;
+	struct {
+		u8 addr;
+		u8 mask;
+	} stat_drdy;
 	struct {
 		u8 en_addr;
 		u8 en_mask;
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index c380daa40c0e..20b61347ea58 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -365,12 +365,9 @@ unsigned int iio_get_time_res(const struct iio_dev *indio_dev);
 #define INDIO_MAX_RAW_ELEMENTS		4
 
 struct iio_trigger; /* forward declaration */
-struct iio_dev;
 
 /**
  * struct iio_info - constant information about device
- * @driver_module:	module structure used to ensure correct
- *			ownership of chrdevs etc
  * @event_attrs:	event control attributes
  * @attrs:		general purpose device attributes
  * @read_raw:		function to request a value from the device.
@@ -425,7 +422,6 @@ struct iio_dev;
  *			were flushed and there was an error.
  **/
 struct iio_info {
-	struct module			*driver_module;
 	const struct attribute_group	*event_attrs;
 	const struct attribute_group	*attrs;
 
@@ -518,6 +514,7 @@ struct iio_buffer_setup_ops {
 /**
  * struct iio_dev - industrial I/O device
  * @id:			[INTERN] used to identify device internally
+ * @driver_module:	[INTERN] used to make it harder to undercut users
  * @modes:		[DRIVER] operating modes supported by device
  * @currentmode:	[DRIVER] current operating mode
  * @dev:		[DRIVER] device structure, should be assigned a parent
@@ -558,6 +555,7 @@ struct iio_buffer_setup_ops {
  */
 struct iio_dev {
 	int				id;
+	struct module			*driver_module;
 
 	int				modes;
 	int				currentmode;
@@ -604,9 +602,34 @@ struct iio_dev {
 
 const struct iio_chan_spec
 *iio_find_channel_from_si(struct iio_dev *indio_dev, int si);
-int iio_device_register(struct iio_dev *indio_dev);
+/**
+ * iio_device_register() - register a device with the IIO subsystem
+ * @indio_dev:		Device structure filled by the device driver
+ **/
+#define iio_device_register(iio_dev) \
+	__iio_device_register((iio_dev), THIS_MODULE)
+int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod);
 void iio_device_unregister(struct iio_dev *indio_dev);
-int devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev);
+/**
+ * devm_iio_device_register - Resource-managed iio_device_register()
+ * @dev:	Device to allocate iio_dev for
+ * @indio_dev:	Device structure filled by the device driver
+ *
+ * Managed iio_device_register.  The IIO device registered with this
+ * function is automatically unregistered on driver detach. This function
+ * calls iio_device_register() internally. Refer to that function for more
+ * information.
+ *
+ * If an iio_dev registered with this function needs to be unregistered
+ * separately, devm_iio_device_unregister() must be used.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+#define devm_iio_device_register(dev, indio_dev) \
+	__devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
+int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
+			       struct module *this_mod);
 void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
 int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
 int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index 7142d8d6e470..7d5e44518379 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -23,7 +23,6 @@ struct iio_trigger;
 
 /**
  * struct iio_trigger_ops - operations structure for an iio_trigger.
- * @owner:		used to monitor usage count of the trigger.
  * @set_trigger_state:	switch on/off the trigger on demand
  * @try_reenable:	function to reenable the trigger when the
  *			use count is zero (may be NULL)
@@ -34,7 +33,6 @@ struct iio_trigger;
  * instances of a given device.
  **/
 struct iio_trigger_ops {
-	struct module *owner;
 	int (*set_trigger_state)(struct iio_trigger *trig, bool state);
 	int (*try_reenable)(struct iio_trigger *trig);
 	int (*validate_device)(struct iio_trigger *trig,
@@ -62,6 +60,7 @@ struct iio_trigger_ops {
  **/
 struct iio_trigger {
 	const struct iio_trigger_ops	*ops;
+	struct module			*owner;
 	int				id;
 	const char			*name;
 	struct device			dev;
@@ -87,14 +86,14 @@ static inline struct iio_trigger *to_iio_trigger(struct device *d)
 
 static inline void iio_trigger_put(struct iio_trigger *trig)
 {
-	module_put(trig->ops->owner);
+	module_put(trig->owner);
 	put_device(&trig->dev);
 }
 
 static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig)
 {
 	get_device(&trig->dev);
-	__module_get(trig->ops->owner);
+	__module_get(trig->owner);
 
 	return trig;
 }
@@ -127,10 +126,16 @@ static inline void *iio_trigger_get_drvdata(struct iio_trigger *trig)
  * iio_trigger_register() - register a trigger with the IIO core
  * @trig_info:	trigger to be registered
  **/
-int iio_trigger_register(struct iio_trigger *trig_info);
-
-int devm_iio_trigger_register(struct device *dev,
-			      struct iio_trigger *trig_info);
+#define iio_trigger_register(trig_info) \
+	__iio_trigger_register((trig_info), THIS_MODULE)
+int __iio_trigger_register(struct iio_trigger *trig_info,
+			   struct module *this_mod);
+
+#define devm_iio_trigger_register(dev, trig_info) \
+	__devm_iio_trigger_register((dev), (trig_info), THIS_MODULE)
+int __devm_iio_trigger_register(struct device *dev,
+				struct iio_trigger *trig_info,
+				struct module *this_mod);
 
 /**
  * iio_trigger_unregister() - unregister a trigger from the core
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
new file mode 100644
index 000000000000..e00051ced806
--- /dev/null
+++ b/include/linux/usb/pd.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_PD_H
+#define __LINUX_USB_PD_H
+
+#include <linux/types.h>
+#include <linux/usb/typec.h>
+
+/* USB PD Messages */
+enum pd_ctrl_msg_type {
+	/* 0 Reserved */
+	PD_CTRL_GOOD_CRC = 1,
+	PD_CTRL_GOTO_MIN = 2,
+	PD_CTRL_ACCEPT = 3,
+	PD_CTRL_REJECT = 4,
+	PD_CTRL_PING = 5,
+	PD_CTRL_PS_RDY = 6,
+	PD_CTRL_GET_SOURCE_CAP = 7,
+	PD_CTRL_GET_SINK_CAP = 8,
+	PD_CTRL_DR_SWAP = 9,
+	PD_CTRL_PR_SWAP = 10,
+	PD_CTRL_VCONN_SWAP = 11,
+	PD_CTRL_WAIT = 12,
+	PD_CTRL_SOFT_RESET = 13,
+	/* 14-15 Reserved */
+};
+
+enum pd_data_msg_type {
+	/* 0 Reserved */
+	PD_DATA_SOURCE_CAP = 1,
+	PD_DATA_REQUEST = 2,
+	PD_DATA_BIST = 3,
+	PD_DATA_SINK_CAP = 4,
+	/* 5-14 Reserved */
+	PD_DATA_VENDOR_DEF = 15,
+};
+
+#define PD_REV10	0x0
+#define PD_REV20	0x1
+
+#define PD_HEADER_CNT_SHIFT	12
+#define PD_HEADER_CNT_MASK	0x7
+#define PD_HEADER_ID_SHIFT	9
+#define PD_HEADER_ID_MASK	0x7
+#define PD_HEADER_PWR_ROLE	BIT(8)
+#define PD_HEADER_REV_SHIFT	6
+#define PD_HEADER_REV_MASK	0x3
+#define PD_HEADER_DATA_ROLE	BIT(5)
+#define PD_HEADER_TYPE_SHIFT	0
+#define PD_HEADER_TYPE_MASK	0xf
+
+#define PD_HEADER(type, pwr, data, id, cnt)				\
+	((((type) & PD_HEADER_TYPE_MASK) << PD_HEADER_TYPE_SHIFT) |	\
+	 ((pwr) == TYPEC_SOURCE ? PD_HEADER_PWR_ROLE : 0) |		\
+	 ((data) == TYPEC_HOST ? PD_HEADER_DATA_ROLE : 0) |		\
+	 (PD_REV20 << PD_HEADER_REV_SHIFT) |				\
+	 (((id) & PD_HEADER_ID_MASK) << PD_HEADER_ID_SHIFT) |		\
+	 (((cnt) & PD_HEADER_CNT_MASK) << PD_HEADER_CNT_SHIFT))
+
+#define PD_HEADER_LE(type, pwr, data, id, cnt) \
+	cpu_to_le16(PD_HEADER((type), (pwr), (data), (id), (cnt)))
+
+static inline unsigned int pd_header_cnt(u16 header)
+{
+	return (header >> PD_HEADER_CNT_SHIFT) & PD_HEADER_CNT_MASK;
+}
+
+static inline unsigned int pd_header_cnt_le(__le16 header)
+{
+	return pd_header_cnt(le16_to_cpu(header));
+}
+
+static inline unsigned int pd_header_type(u16 header)
+{
+	return (header >> PD_HEADER_TYPE_SHIFT) & PD_HEADER_TYPE_MASK;
+}
+
+static inline unsigned int pd_header_type_le(__le16 header)
+{
+	return pd_header_type(le16_to_cpu(header));
+}
+
+static inline unsigned int pd_header_msgid(u16 header)
+{
+	return (header >> PD_HEADER_ID_SHIFT) & PD_HEADER_ID_MASK;
+}
+
+static inline unsigned int pd_header_msgid_le(__le16 header)
+{
+	return pd_header_msgid(le16_to_cpu(header));
+}
+
+#define PD_MAX_PAYLOAD		7
+
+/**
+ * struct pd_message - PD message as seen on wire
+ * @header:	PD message header
+ * @payload:	PD message payload
+ */
+struct pd_message {
+	__le16 header;
+	__le32 payload[PD_MAX_PAYLOAD];
+} __packed;
+
+/* PDO: Power Data Object */
+#define PDO_MAX_OBJECTS		7
+
+enum pd_pdo_type {
+	PDO_TYPE_FIXED = 0,
+	PDO_TYPE_BATT = 1,
+	PDO_TYPE_VAR = 2,
+};
+
+#define PDO_TYPE_SHIFT		30
+#define PDO_TYPE_MASK		0x3
+
+#define PDO_TYPE(t)	((t) << PDO_TYPE_SHIFT)
+
+#define PDO_VOLT_MASK		0x3ff
+#define PDO_CURR_MASK		0x3ff
+#define PDO_PWR_MASK		0x3ff
+
+#define PDO_FIXED_DUAL_ROLE	BIT(29)	/* Power role swap supported */
+#define PDO_FIXED_SUSPEND	BIT(28) /* USB Suspend supported (Source) */
+#define PDO_FIXED_HIGHER_CAP	BIT(28) /* Requires more than vSafe5V (Sink) */
+#define PDO_FIXED_EXTPOWER	BIT(27) /* Externally powered */
+#define PDO_FIXED_USB_COMM	BIT(26) /* USB communications capable */
+#define PDO_FIXED_DATA_SWAP	BIT(25) /* Data role swap supported */
+#define PDO_FIXED_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_FIXED_CURR_SHIFT	0	/* 10mA units */
+
+#define PDO_FIXED_VOLT(mv)	((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
+#define PDO_FIXED_CURR(ma)	((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)
+
+#define PDO_FIXED(mv, ma, flags)			\
+	(PDO_TYPE(PDO_TYPE_FIXED) | (flags) |		\
+	 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma))
+
+#define PDO_BATT_MAX_VOLT_SHIFT	20	/* 50mV units */
+#define PDO_BATT_MIN_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_BATT_MAX_PWR_SHIFT	0	/* 250mW units */
+
+#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
+#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
+#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)
+
+#define PDO_BATT(min_mv, max_mv, max_mw)			\
+	(PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) |	\
+	 PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw))
+
+#define PDO_VAR_MAX_VOLT_SHIFT	20	/* 50mV units */
+#define PDO_VAR_MIN_VOLT_SHIFT	10	/* 50mV units */
+#define PDO_VAR_MAX_CURR_SHIFT	0	/* 10mA units */
+
+#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
+#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
+#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)
+
+#define PDO_VAR(min_mv, max_mv, max_ma)				\
+	(PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) |	\
+	 PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma))
+
+static inline enum pd_pdo_type pdo_type(u32 pdo)
+{
+	return (pdo >> PDO_TYPE_SHIFT) & PDO_TYPE_MASK;
+}
+
+static inline unsigned int pdo_fixed_voltage(u32 pdo)
+{
+	return ((pdo >> PDO_FIXED_VOLT_SHIFT) & PDO_VOLT_MASK) * 50;
+}
+
+static inline unsigned int pdo_min_voltage(u32 pdo)
+{
+	return ((pdo >> PDO_VAR_MIN_VOLT_SHIFT) & PDO_VOLT_MASK) * 50;
+}
+
+static inline unsigned int pdo_max_voltage(u32 pdo)
+{
+	return ((pdo >> PDO_VAR_MAX_VOLT_SHIFT) & PDO_VOLT_MASK) * 50;
+}
+
+static inline unsigned int pdo_max_current(u32 pdo)
+{
+	return ((pdo >> PDO_VAR_MAX_CURR_SHIFT) & PDO_CURR_MASK) * 10;
+}
+
+static inline unsigned int pdo_max_power(u32 pdo)
+{
+	return ((pdo >> PDO_BATT_MAX_PWR_SHIFT) & PDO_PWR_MASK) * 250;
+}
+
+/* RDO: Request Data Object */
+#define RDO_OBJ_POS_SHIFT	28
+#define RDO_OBJ_POS_MASK	0x7
+#define RDO_GIVE_BACK		BIT(27)	/* Supports reduced operating current */
+#define RDO_CAP_MISMATCH	BIT(26) /* Not satisfied by source caps */
+#define RDO_USB_COMM		BIT(25) /* USB communications capable */
+#define RDO_NO_SUSPEND		BIT(24) /* USB Suspend not supported */
+
+#define RDO_PWR_MASK			0x3ff
+#define RDO_CURR_MASK			0x3ff
+
+#define RDO_FIXED_OP_CURR_SHIFT		10
+#define RDO_FIXED_MAX_CURR_SHIFT	0
+
+#define RDO_OBJ(idx) (((idx) & RDO_OBJ_POS_MASK) << RDO_OBJ_POS_SHIFT)
+
+#define PDO_FIXED_OP_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_OP_CURR_SHIFT)
+#define PDO_FIXED_MAX_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_MAX_CURR_SHIFT)
+
+#define RDO_FIXED(idx, op_ma, max_ma, flags)			\
+	(RDO_OBJ(idx) | (flags) |				\
+	 PDO_FIXED_OP_CURR(op_ma) | PDO_FIXED_MAX_CURR(max_ma))
+
+#define RDO_BATT_OP_PWR_SHIFT		10	/* 250mW units */
+#define RDO_BATT_MAX_PWR_SHIFT		0	/* 250mW units */
+
+#define RDO_BATT_OP_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_OP_PWR_SHIFT)
+#define RDO_BATT_MAX_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_MAX_PWR_SHIFT)
+
+#define RDO_BATT(idx, op_mw, max_mw, flags)			\
+	(RDO_OBJ(idx) | (flags) |				\
+	 RDO_BATT_OP_PWR(op_mw) | RDO_BATT_MAX_PWR(max_mw))
+
+static inline unsigned int rdo_index(u32 rdo)
+{
+	return (rdo >> RDO_OBJ_POS_SHIFT) & RDO_OBJ_POS_MASK;
+}
+
+static inline unsigned int rdo_op_current(u32 rdo)
+{
+	return ((rdo >> RDO_FIXED_OP_CURR_SHIFT) & RDO_CURR_MASK) * 10;
+}
+
+static inline unsigned int rdo_max_current(u32 rdo)
+{
+	return ((rdo >> RDO_FIXED_MAX_CURR_SHIFT) &
+		RDO_CURR_MASK) * 10;
+}
+
+static inline unsigned int rdo_op_power(u32 rdo)
+{
+	return ((rdo >> RDO_BATT_OP_PWR_SHIFT) & RDO_PWR_MASK) * 250;
+}
+
+static inline unsigned int rdo_max_power(u32 rdo)
+{
+	return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250;
+}
+
+/* USB PD timers and counters */
+#define PD_T_NO_RESPONSE	5000	/* 4.5 - 5.5 seconds */
+#define PD_T_DB_DETECT		10000	/* 10 - 15 seconds */
+#define PD_T_SEND_SOURCE_CAP	150	/* 100 - 200 ms */
+#define PD_T_SENDER_RESPONSE	60	/* 24 - 30 ms, relaxed */
+#define PD_T_SOURCE_ACTIVITY	45
+#define PD_T_SINK_ACTIVITY	135
+#define PD_T_SINK_WAIT_CAP	240
+#define PD_T_PS_TRANSITION	500
+#define PD_T_SRC_TRANSITION	35
+#define PD_T_DRP_SNK		40
+#define PD_T_DRP_SRC		30
+#define PD_T_PS_SOURCE_OFF	920
+#define PD_T_PS_SOURCE_ON	480
+#define PD_T_PS_HARD_RESET	30
+#define PD_T_SRC_RECOVER	760
+#define PD_T_SRC_RECOVER_MAX	1000
+#define PD_T_SRC_TURN_ON	275
+#define PD_T_SAFE_0V		650
+#define PD_T_VCONN_SOURCE_ON	100
+#define PD_T_SINK_REQUEST	100	/* 100 ms minimum */
+#define PD_T_ERROR_RECOVERY	100	/* minimum 25 is insufficient */
+#define PD_T_SRCSWAPSTDBY      625     /* Maximum of 650ms */
+#define PD_T_NEWSRC            250     /* Maximum of 275ms */
+
+#define PD_T_DRP_TRY		100	/* 75 - 150 ms */
+#define PD_T_DRP_TRYWAIT	600	/* 400 - 800 ms */
+
+#define PD_T_CC_DEBOUNCE	200	/* 100 - 200 ms */
+#define PD_T_PD_DEBOUNCE	20	/* 10 - 20 ms */
+
+#define PD_N_CAPS_COUNT		(PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
+#define PD_N_HARD_RESET_COUNT	2
+
+#endif /* __LINUX_USB_PD_H */
diff --git a/include/linux/usb/pd_bdo.h b/include/linux/usb/pd_bdo.h
new file mode 100644
index 000000000000..90b94d9fea5d
--- /dev/null
+++ b/include/linux/usb/pd_bdo.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_PD_BDO_H
+#define __LINUX_USB_PD_BDO_H
+
+/* BDO : BIST Data Object */
+#define BDO_MODE_RECV		(0 << 28)
+#define BDO_MODE_TRANSMIT	(1 << 28)
+#define BDO_MODE_COUNTERS	(2 << 28)
+#define BDO_MODE_CARRIER0	(3 << 28)
+#define BDO_MODE_CARRIER1	(4 << 28)
+#define BDO_MODE_CARRIER2	(5 << 28)
+#define BDO_MODE_CARRIER3	(6 << 28)
+#define BDO_MODE_EYE		(7 << 28)
+#define BDO_MODE_TESTDATA	(8 << 28)
+
+#define BDO_MODE_MASK(mode)	((mode) & 0xf0000000)
+
+#endif
diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
new file mode 100644
index 000000000000..d92259f8de0a
--- /dev/null
+++ b/include/linux/usb/pd_vdo.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_PD_VDO_H
+#define __LINUX_USB_PD_VDO_H
+
+#include "pd.h"
+
+/*
+ * VDO : Vendor Defined Message Object
+ * VDM object is minimum of VDM header + 6 additional data objects.
+ */
+
+#define VDO_MAX_OBJECTS		6
+#define VDO_MAX_SIZE		(VDO_MAX_OBJECTS + 1)
+
+/*
+ * VDM header
+ * ----------
+ * <31:16>  :: SVID
+ * <15>     :: VDM type ( 1b == structured, 0b == unstructured )
+ * <14:13>  :: Structured VDM version (can only be 00 == 1.0 currently)
+ * <12:11>  :: reserved
+ * <10:8>   :: object position (1-7 valid ... used for enter/exit mode only)
+ * <7:6>    :: command type (SVDM only?)
+ * <5>      :: reserved (SVDM), command type (UVDM)
+ * <4:0>    :: command
+ */
+#define VDO(vid, type, custom)				\
+	(((vid) << 16) |				\
+	 ((type) << 15) |				\
+	 ((custom) & 0x7FFF))
+
+#define VDO_SVDM_TYPE		(1 << 15)
+#define VDO_SVDM_VERS(x)	((x) << 13)
+#define VDO_OPOS(x)		((x) << 8)
+#define VDO_CMDT(x)		((x) << 6)
+#define VDO_OPOS_MASK		VDO_OPOS(0x7)
+#define VDO_CMDT_MASK		VDO_CMDT(0x3)
+
+#define CMDT_INIT		0
+#define CMDT_RSP_ACK		1
+#define CMDT_RSP_NAK		2
+#define CMDT_RSP_BUSY		3
+
+/* reserved for SVDM ... for Google UVDM */
+#define VDO_SRC_INITIATOR	(0 << 5)
+#define VDO_SRC_RESPONDER	(1 << 5)
+
+#define CMD_DISCOVER_IDENT	1
+#define CMD_DISCOVER_SVID	2
+#define CMD_DISCOVER_MODES	3
+#define CMD_ENTER_MODE		4
+#define CMD_EXIT_MODE		5
+#define CMD_ATTENTION		6
+
+#define VDO_CMD_VENDOR(x)    (((10 + (x)) & 0x1f))
+
+/* ChromeOS specific commands */
+#define VDO_CMD_VERSION		VDO_CMD_VENDOR(0)
+#define VDO_CMD_SEND_INFO	VDO_CMD_VENDOR(1)
+#define VDO_CMD_READ_INFO	VDO_CMD_VENDOR(2)
+#define VDO_CMD_REBOOT		VDO_CMD_VENDOR(5)
+#define VDO_CMD_FLASH_ERASE	VDO_CMD_VENDOR(6)
+#define VDO_CMD_FLASH_WRITE	VDO_CMD_VENDOR(7)
+#define VDO_CMD_ERASE_SIG	VDO_CMD_VENDOR(8)
+#define VDO_CMD_PING_ENABLE	VDO_CMD_VENDOR(10)
+#define VDO_CMD_CURRENT		VDO_CMD_VENDOR(11)
+#define VDO_CMD_FLIP		VDO_CMD_VENDOR(12)
+#define VDO_CMD_GET_LOG		VDO_CMD_VENDOR(13)
+#define VDO_CMD_CCD_EN		VDO_CMD_VENDOR(14)
+
+#define PD_VDO_VID(vdo)		((vdo) >> 16)
+#define PD_VDO_SVDM(vdo)	(((vdo) >> 15) & 1)
+#define PD_VDO_OPOS(vdo)	(((vdo) >> 8) & 0x7)
+#define PD_VDO_CMD(vdo)		((vdo) & 0x1f)
+#define PD_VDO_CMDT(vdo)	(((vdo) >> 6) & 0x3)
+
+/*
+ * SVDM Identity request -> response
+ *
+ * Request is simply properly formatted SVDM header
+ *
+ * Response is 4 data objects:
+ * [0] :: SVDM header
+ * [1] :: Identitiy header
+ * [2] :: Cert Stat VDO
+ * [3] :: (Product | Cable) VDO
+ * [4] :: AMA VDO
+ *
+ */
+#define VDO_INDEX_HDR		0
+#define VDO_INDEX_IDH		1
+#define VDO_INDEX_CSTAT		2
+#define VDO_INDEX_CABLE		3
+#define VDO_INDEX_PRODUCT	3
+#define VDO_INDEX_AMA		4
+
+/*
+ * SVDM Identity Header
+ * --------------------
+ * <31>     :: data capable as a USB host
+ * <30>     :: data capable as a USB device
+ * <29:27>  :: product type
+ * <26>     :: modal operation supported (1b == yes)
+ * <25:16>  :: Reserved, Shall be set to zero
+ * <15:0>   :: USB-IF assigned VID for this cable vendor
+ */
+#define IDH_PTYPE_UNDEF		0
+#define IDH_PTYPE_HUB		1
+#define IDH_PTYPE_PERIPH	2
+#define IDH_PTYPE_PCABLE	3
+#define IDH_PTYPE_ACABLE	4
+#define IDH_PTYPE_AMA		5
+
+#define VDO_IDH(usbh, usbd, ptype, is_modal, vid)		\
+	((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27	\
+	 | (is_modal) << 26 | ((vid) & 0xffff))
+
+#define PD_IDH_PTYPE(vdo)	(((vdo) >> 27) & 0x7)
+#define PD_IDH_VID(vdo)		((vdo) & 0xffff)
+#define PD_IDH_MODAL_SUPP(vdo)	((vdo) & (1 << 26))
+
+/*
+ * Cert Stat VDO
+ * -------------
+ * <31:0>  : USB-IF assigned XID for this cable
+ */
+#define PD_CSTAT_XID(vdo)	(vdo)
+
+/*
+ * Product VDO
+ * -----------
+ * <31:16> : USB Product ID
+ * <15:0>  : USB bcdDevice
+ */
+#define VDO_PRODUCT(pid, bcd)	(((pid) & 0xffff) << 16 | ((bcd) & 0xffff))
+#define PD_PRODUCT_PID(vdo)	(((vdo) >> 16) & 0xffff)
+
+/*
+ * Cable VDO
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
+ * <17>    :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
+#define CABLE_CTYPE		2
+#define CABLE_PLUG		0
+#define CABLE_RECEPTACLE	1
+#define CABLE_CURR_1A5		0
+#define CABLE_CURR_3A		1
+#define CABLE_CURR_5A		2
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\
+		  vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18	\
+	 | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11	\
+	 | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7	\
+	 | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3		\
+	 | ((usbss) & 0x7))
+
+/*
+ * AMA VDO
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_VCONN_PWR_1W	0
+#define AMA_VCONN_PWR_1W5	1
+#define AMA_VCONN_PWR_2W	2
+#define AMA_VCONN_PWR_3W	3
+#define AMA_VCONN_PWR_4W	4
+#define AMA_VCONN_PWR_5W	5
+#define AMA_VCONN_PWR_6W	6
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
+/*
+ * SVDM Discover SVIDs request -> response
+ *
+ * Request is properly formatted VDM Header with discover SVIDs command.
+ * Response is a set of SVIDs of all all supported SVIDs with all zero's to
+ * mark the end of SVIDs.  If more than 12 SVIDs are supported command SHOULD be
+ * repeated.
+ */
+#define VDO_SVID(svid0, svid1)	(((svid0) & 0xffff) << 16 | ((svid1) & 0xffff))
+#define PD_VDO_SVID_SVID0(vdo)	((vdo) >> 16)
+#define PD_VDO_SVID_SVID1(vdo)	((vdo) & 0xffff)
+
+/* USB-IF SIDs */
+#define USB_SID_PD		0xff00 /* power delivery */
+#define USB_SID_DISPLAYPORT	0xff01
+#define USB_SID_MHL		0xff02	/* Mobile High-Definition Link */
+
+/* VDM command timeouts (in ms) */
+
+#define PD_T_VDM_UNSTRUCTURED	500
+#define PD_T_VDM_BUSY		100
+#define PD_T_VDM_WAIT_MODE_E	100
+#define PD_T_VDM_SNDR_RSP	30
+#define PD_T_VDM_E_MODE		25
+#define PD_T_VDM_RCVR_RSP	15
+
+#endif /* __LINUX_USB_PD_VDO_H */
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
new file mode 100644
index 000000000000..073197f0d2bb
--- /dev/null
+++ b/include/linux/usb/tcpm.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2015-2017 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_USB_TCPM_H
+#define __LINUX_USB_TCPM_H
+
+#include <linux/bitops.h>
+#include <linux/usb/typec.h>
+#include "pd.h"
+
+enum typec_cc_status {
+	TYPEC_CC_OPEN,
+	TYPEC_CC_RA,
+	TYPEC_CC_RD,
+	TYPEC_CC_RP_DEF,
+	TYPEC_CC_RP_1_5,
+	TYPEC_CC_RP_3_0,
+};
+
+enum typec_cc_polarity {
+	TYPEC_POLARITY_CC1,
+	TYPEC_POLARITY_CC2,
+};
+
+/* Time to wait for TCPC to complete transmit */
+#define PD_T_TCPC_TX_TIMEOUT	100		/* in ms	*/
+#define PD_ROLE_SWAP_TIMEOUT	(MSEC_PER_SEC * 10)
+
+enum tcpm_transmit_status {
+	TCPC_TX_SUCCESS = 0,
+	TCPC_TX_DISCARDED = 1,
+	TCPC_TX_FAILED = 2,
+};
+
+enum tcpm_transmit_type {
+	TCPC_TX_SOP = 0,
+	TCPC_TX_SOP_PRIME = 1,
+	TCPC_TX_SOP_PRIME_PRIME = 2,
+	TCPC_TX_SOP_DEBUG_PRIME = 3,
+	TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4,
+	TCPC_TX_HARD_RESET = 5,
+	TCPC_TX_CABLE_RESET = 6,
+	TCPC_TX_BIST_MODE_2 = 7
+};
+
+/**
+ * struct tcpc_config - Port configuration
+ * @src_pdo:	PDO parameters sent to port partner as response to
+ *		PD_CTRL_GET_SOURCE_CAP message
+ * @nr_src_pdo:	Number of entries in @src_pdo
+ * @snk_pdo:	PDO parameters sent to partner as response to
+ *		PD_CTRL_GET_SINK_CAP message
+ * @nr_snk_pdo:	Number of entries in @snk_pdo
+ * @max_snk_mv:	Maximum acceptable sink voltage in mV
+ * @max_snk_ma:	Maximum sink current in mA
+ * @max_snk_mw:	Maximum required sink power in mW
+ * @operating_snk_mw:
+ *		Required operating sink power in mW
+ * @type:	Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or
+ *		TYPEC_PORT_DRP)
+ * @default_role:
+ *		Default port role (TYPEC_SINK or TYPEC_SOURCE).
+ *		Set to TYPEC_NO_PREFERRED_ROLE if no default role.
+ * @try_role_hw:True if try.{Src,Snk} is implemented in hardware
+ * @alt_modes:	List of supported alternate modes
+ */
+struct tcpc_config {
+	const u32 *src_pdo;
+	unsigned int nr_src_pdo;
+
+	const u32 *snk_pdo;
+	unsigned int nr_snk_pdo;
+
+	const u32 *snk_vdo;
+	unsigned int nr_snk_vdo;
+
+	unsigned int max_snk_mv;
+	unsigned int max_snk_ma;
+	unsigned int max_snk_mw;
+	unsigned int operating_snk_mw;
+
+	enum typec_port_type type;
+	enum typec_role default_role;
+	bool try_role_hw;	/* try.{src,snk} implemented in hardware */
+
+	const struct typec_altmode_desc *alt_modes;
+};
+
+enum tcpc_usb_switch {
+	TCPC_USB_SWITCH_CONNECT,
+	TCPC_USB_SWITCH_DISCONNECT,
+};
+
+/* Mux state attributes */
+#define TCPC_MUX_USB_ENABLED		BIT(0)	/* USB enabled */
+#define TCPC_MUX_DP_ENABLED		BIT(1)	/* DP enabled */
+#define TCPC_MUX_POLARITY_INVERTED	BIT(2)	/* Polarity inverted */
+
+/* Mux modes, decoded to attributes */
+enum tcpc_mux_mode {
+	TYPEC_MUX_NONE	= 0,				/* Open switch */
+	TYPEC_MUX_USB	= TCPC_MUX_USB_ENABLED,		/* USB only */
+	TYPEC_MUX_DP	= TCPC_MUX_DP_ENABLED,		/* DP only */
+	TYPEC_MUX_DOCK	= TCPC_MUX_USB_ENABLED |	/* Both USB and DP */
+			  TCPC_MUX_DP_ENABLED,
+};
+
+struct tcpc_mux_dev {
+	int (*set)(struct tcpc_mux_dev *dev, enum tcpc_mux_mode mux_mode,
+		   enum tcpc_usb_switch usb_config,
+		   enum typec_cc_polarity polarity);
+	bool dfp_only;
+	void *priv_data;
+};
+
+/**
+ * struct tcpc_dev - Port configuration and callback functions
+ * @config:	Pointer to port configuration
+ * @get_vbus:	Called to read current VBUS state
+ * @get_current_limit:
+ *		Optional; called by the tcpm core when configured as a snk
+ *		and cc=Rp-def. This allows the tcpm to provide a fallback
+ *		current-limit detection method for the cc=Rp-def case.
+ *		For example, some tcpcs may include BC1.2 charger detection
+ *		and use that in this case.
+ * @set_cc:	Called to set value of CC pins
+ * @get_cc:	Called to read current CC pin values
+ * @set_polarity:
+ *		Called to set polarity
+ * @set_vconn:	Called to enable or disable VCONN
+ * @set_vbus:	Called to enable or disable VBUS
+ * @set_current_limit:
+ *		Optional; called to set current limit as negotiated
+ *		with partner.
+ * @set_pd_rx:	Called to enable or disable reception of PD messages
+ * @set_roles:	Called to set power and data roles
+ * @start_drp_toggling:
+ *		Optional; if supported by hardware, called to start DRP
+ *		toggling. DRP toggling is stopped automatically if
+ *		a connection is established.
+ * @try_role:	Optional; called to set a preferred role
+ * @pd_transmit:Called to transmit PD message
+ * @mux:	Pointer to multiplexer data
+ */
+struct tcpc_dev {
+	const struct tcpc_config *config;
+
+	int (*init)(struct tcpc_dev *dev);
+	int (*get_vbus)(struct tcpc_dev *dev);
+	int (*get_current_limit)(struct tcpc_dev *dev);
+	int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
+	int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
+		      enum typec_cc_status *cc2);
+	int (*set_polarity)(struct tcpc_dev *dev,
+			    enum typec_cc_polarity polarity);
+	int (*set_vconn)(struct tcpc_dev *dev, bool on);
+	int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge);
+	int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv);
+	int (*set_pd_rx)(struct tcpc_dev *dev, bool on);
+	int (*set_roles)(struct tcpc_dev *dev, bool attached,
+			 enum typec_role role, enum typec_data_role data);
+	int (*start_drp_toggling)(struct tcpc_dev *dev,
+				  enum typec_cc_status cc);
+	int (*try_role)(struct tcpc_dev *dev, int role);
+	int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
+			   const struct pd_message *msg);
+	struct tcpc_mux_dev *mux;
+};
+
+struct tcpm_port;
+
+struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
+void tcpm_unregister_port(struct tcpm_port *port);
+
+void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
+				     unsigned int nr_pdo);
+void tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
+				   unsigned int nr_pdo,
+				   unsigned int max_snk_mv,
+				   unsigned int max_snk_ma,
+				   unsigned int max_snk_mw,
+				   unsigned int operating_snk_mw);
+
+void tcpm_vbus_change(struct tcpm_port *port);
+void tcpm_cc_change(struct tcpm_port *port);
+void tcpm_pd_receive(struct tcpm_port *port,
+		     const struct pd_message *msg);
+void tcpm_pd_transmit_complete(struct tcpm_port *port,
+			       enum tcpm_transmit_status status);
+void tcpm_pd_hard_reset(struct tcpm_port *port);
+void tcpm_tcpc_reset(struct tcpm_port *port);
+
+#endif /* __LINUX_USB_TCPM_H */