diff options
author | Arindam Nath <arindam.nath@amd.com> | 2011-05-05 12:19:04 +0530 |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2011-05-24 23:53:46 -0400 |
commit | b513ea250eb7c36a8afb3df938d632ca6b4df7cd (patch) | |
tree | 41b597f488ffa21c675f49bd8c8ea00d177125e2 /include/linux/mmc | |
parent | 3a3035114307cd55e024662bb295a87b849f0bd4 (diff) |
mmc: sd: add support for tuning during uhs initialization
Host Controller needs tuning during initialization to operate SDR50
and SDR104 UHS-I cards. Whether SDR50 mode actually needs tuning is
indicated by bit 45 of the Host Controller Capabilities register.
A new command CMD19 has been defined in the Physical Layer spec
v3.01 to request the card to send tuning pattern.
We enable Buffer Read Ready interrupt at the very begining of tuning
procedure, because that is the only interrupt generated by the Host
Controller during tuning. We program the block size to 64 in the
Block Size register. We make sure that DMA Enable and Multi Block
Select in the Transfer Mode register are set to 0 before actually
sending CMD19. The tuning block is sent by the card to the Host
Controller using DAT lines, so we set Data Present Select (bit 5) in
the Command register. The Host Controller is responsible for doing
the verfication of tuning block sent by the card at the hardware
level. After sending CMD19, we wait for Buffer Read Ready interrupt.
In case we don't receive an interrupt after the specified timeout
value, we fall back on fixed sampling clock by setting Execute
Tuning (bit 6) and Sampling Clock Select (bit 7) of Host Control2
register to 0. Before exiting the tuning procedure, we disable Buffer
Read Ready interrupt and re-enable other interrupts.
Tested by Zhangfei Gao with a Toshiba uhs card and general hs card,
on mmp2 in SDMA mode.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Philip Rakity <prakity@marvell.com>
Tested-by: Philip Rakity <prakity@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'include/linux/mmc')
-rw-r--r-- | include/linux/mmc/host.h | 1 | ||||
-rw-r--r-- | include/linux/mmc/mmc.h | 1 | ||||
-rw-r--r-- | include/linux/mmc/sdhci.h | 4 |
3 files changed, 6 insertions, 0 deletions
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 52b5dc914a8c..ca7007fdb399 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -136,6 +136,7 @@ struct mmc_host_ops { void (*init_card)(struct mmc_host *host, struct mmc_card *card); int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); + int (*execute_tuning)(struct mmc_host *host); }; struct mmc_card; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 373b2bf5e5b5..9fa5a73f393d 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -50,6 +50,7 @@ #define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ +#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */ /* class 3 */ #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 92e1c9ad126c..b74c8530e959 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -111,6 +111,7 @@ struct sdhci_host { #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ +#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ unsigned int version; /* SDHCI spec. version */ @@ -147,6 +148,9 @@ struct sdhci_host { unsigned int ocr_avail_sd; unsigned int ocr_avail_mmc; + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ + unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ + unsigned long private[0] ____cacheline_aligned; }; #endif /* __SDHCI_H */ |