Merge tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very quiet release, mostly cleanups, API updates and
  simple device additions. I messed up slightly and there are a couple
  of duplicated commits resulting from me leaving things in my inbox
  which didn't seem worth removing by the time I noticed them.

   - Conversion of several drivers to GPIO descriptors

   - Build out the features of of the MP8859 driver

   - Support for Qualcomm PM4125 and PM6150"

* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
  regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
  regulator: core: make regulator_class constant
  regulator: da9121: Remove unused of_gpio.h
  regulator: userspace-consumer: add module device table
  regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
  regulator: mp8859: Implement set_current_limit()
  regulator: mp8859: Report slew rate
  regulator: mp8859: Support status and error readback
  regulator: mp8859: Support active discharge control
  regulator: mp8859: Support mode operations
  regulator: mp8859: Support enable control
  regulator: mp8859: Validate and log device identifier information
  regulator: mp8859: Specify register accessibility and enable caching
  regulator: max8998: Convert to GPIO descriptors
  regulator: max8997: Convert to GPIO descriptors
  regulator: lp8788-buck: Fully convert to GPIO descriptors
  regulator: da9055: Fully convert to GPIO descriptors
  regulator: max8973: Finalize switch to GPIO descriptors
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  ...

4 files changed, 2 insertions, 27 deletions

diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h
index d3f126990ad0..137a2b067512 100644
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -7,7 +7,6 @@
 #define DA9055_MAX_REGULATORS	8
 
 struct da9055;
-struct gpio_desc;
 
 enum gpio_select {
 	NO_GPIO = 0,
@@ -24,16 +23,6 @@ struct da9055_pdata {
 	/* Enable RTC in RESET Mode */
 	bool reset_enable;
 	/*
-	 * GPI muxed pin to control
-	 * regulator state A/B, 0 if not available.
-	 */
-	int *gpio_ren;
-	/*
-	 * GPI muxed pin to control
-	 * regulator set, 0 if not available.
-	 */
-	int *gpio_rsel;
-	/*
 	 * Regulator mode control bits value (GPI offset) that
 	 * controls the regulator state, 0 if not available.
 	 */
@@ -43,7 +32,5 @@ struct da9055_pdata {
 	 * controls the regulator set A/B, 0 if  not available.
 	 */
 	enum gpio_select *reg_rsel;
-	/* GPIO descriptors to enable regulator, NULL if not available */
-	struct gpio_desc **ena_gpiods;
 };
 #endif /* __DA9055_PDATA_H */
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
index 3d5c480d58ea..51b47966a04d 100644
--- a/include/linux/mfd/lp8788.h
+++ b/include/linux/mfd/lp8788.h
@@ -10,7 +10,6 @@
 #ifndef __MFD_LP8788_H__
 #define __MFD_LP8788_H__
 
-#include <linux/gpio.h>
 #include <linux/irqdomain.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
@@ -159,21 +158,17 @@ struct lp8788;
 
 /*
  * lp8788_buck1_dvs
- * @gpio         : gpio pin number for dvs control
  * @vsel         : dvs selector for buck v1 register
  */
 struct lp8788_buck1_dvs {
-	int gpio;
 	enum lp8788_dvs_sel vsel;
 };
 
 /*
  * lp8788_buck2_dvs
- * @gpio         : two gpio pin numbers are used for dvs
  * @vsel         : dvs selector for buck v2 register
  */
 struct lp8788_buck2_dvs {
-	int gpio[LP8788_NUM_BUCK2_DVS];
 	enum lp8788_dvs_sel vsel;
 };
 
@@ -268,8 +263,8 @@ struct lp8788_vib_platform_data {
  * @buck_data    : regulator initial data for buck
  * @dldo_data    : regulator initial data for digital ldo
  * @aldo_data    : regulator initial data for analog ldo
- * @buck1_dvs    : gpio configurations for buck1 dvs
- * @buck2_dvs    : gpio configurations for buck2 dvs
+ * @buck1_dvs    : configurations for buck1 dvs
+ * @buck2_dvs    : configurations for buck2 dvs
  * @chg_pdata    : platform data for charger driver
  * @alarm_sel    : rtc alarm selection (1 or 2)
  * @bl_pdata     : configurable data for backlight driver
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 6193905abbb5..5c2cc1103437 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -178,7 +178,6 @@ struct max8997_platform_data {
 	 *
 	 */
 	bool ignore_gpiodvs_side_effect;
-	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
 	int buck125_default_idx; /* Default value of SET1, 2, 3 */
 	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
 	bool buck1_gpiodvs;
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 79c020bd0c70..a054e55c8646 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -65,10 +65,7 @@ struct max8998_regulator_data {
  *   be other than the preset values.
  * @buck1_voltage: BUCK1 DVS mode 1 voltage registers
  * @buck2_voltage: BUCK2 DVS mode 2 voltage registers
- * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
- * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
  * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
- * @buck2_set3: BUCK2 gpio pin to set output voltage
  * @buck2_default_idx: Default for BUCK2 gpio pin.
  * @wakeup: Allow to wake up from suspend
  * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
@@ -91,10 +88,7 @@ struct max8998_platform_data {
 	bool				buck_voltage_lock;
 	int				buck1_voltage[4];
 	int				buck2_voltage[2];
-	int				buck1_set1;
-	int				buck1_set2;
 	int				buck1_default_idx;
-	int				buck2_set3;
 	int				buck2_default_idx;
 	bool				wakeup;
 	bool				rtc_delay;