pwm: meson: make full use of common clock framework

Newer versions of the PWM block use a core clock with external mux,
divider, and gate. These components either don't exist any longer in
the PWM block, or they are bypassed.
To minimize needed changes for supporting the new version, the internal
divider and gate should be handled by CCF too.

I didn't see a good way to split the patch, therefore it's somewhat
bigger. What it does:

- The internal mux is handled by CCF already. Register also internal
  divider and gate with CCF, so that we have one representation of the
  input clock: [mux] parent of [divider] parent of [gate]

- Now that CCF selects an appropriate mux parent, we don't need the
  DT-provided default parent any longer. Accordingly we can also omit
  setting the mux parent directly in the driver.

- Instead of manually handling the pre-div divider value, let CCF
  set the input clock. Targeted input clock frequency is
  0xffff * 1/period for best precision.

- For the "inverted pwm disabled" scenario target an input clock
  frequency of ULONG_MAX. This ensures that the remaining low pulses
  have minimum length.

I don't have hw with the old PWM block, therefore I couldn't test this
patch. With the not yet included extension for the new PWM block
(channel->clk coming directly from get_clk(external_clk)) I didn't
notice any problem. My system uses PWM for the CPU voltage regulator
and for the SDIO 32kHz clock.

Note: The clock gate in the old PWM block is permanently disabled.
This seems to indicate that it's not used by the new PWM block.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

1 files changed, 90 insertions, 68 deletions

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 48dcc44df241..22f54db3ae8e 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -49,9 +49,9 @@
 #define PWM_HIGH_MASK		GENMASK(31, 16)
 
 #define REG_MISC_AB		0x8
-#define MISC_B_CLK_EN		BIT(23)
-#define MISC_A_CLK_EN		BIT(15)
-#define MISC_CLK_DIV_MASK	0x7f
+#define MISC_B_CLK_EN_SHIFT	23
+#define MISC_A_CLK_EN_SHIFT	15
+#define MISC_CLK_DIV_WIDTH	7
 #define MISC_B_CLK_DIV_SHIFT	16
 #define MISC_A_CLK_DIV_SHIFT	8
 #define MISC_B_CLK_SEL_SHIFT	6
@@ -67,32 +67,33 @@ static struct meson_pwm_channel_data {
 	u8		reg_offset;
 	u8		clk_sel_shift;
 	u8		clk_div_shift;
-	u32		clk_en_mask;
+	u8		clk_en_shift;
 	u32		pwm_en_mask;
 } meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
 	{
 		.reg_offset	= REG_PWM_A,
 		.clk_sel_shift	= MISC_A_CLK_SEL_SHIFT,
 		.clk_div_shift	= MISC_A_CLK_DIV_SHIFT,
-		.clk_en_mask	= MISC_A_CLK_EN,
+		.clk_en_shift	= MISC_A_CLK_EN_SHIFT,
 		.pwm_en_mask	= MISC_A_EN,
 	},
 	{
 		.reg_offset	= REG_PWM_B,
 		.clk_sel_shift	= MISC_B_CLK_SEL_SHIFT,
 		.clk_div_shift	= MISC_B_CLK_DIV_SHIFT,
-		.clk_en_mask	= MISC_B_CLK_EN,
+		.clk_en_shift	= MISC_B_CLK_EN_SHIFT,
 		.pwm_en_mask	= MISC_B_EN,
 	}
 };
 
 struct meson_pwm_channel {
+	unsigned long rate;
 	unsigned int hi;
 	unsigned int lo;
-	u8 pre_div;
 
-	struct clk *clk_parent;
 	struct clk_mux mux;
+	struct clk_divider div;
+	struct clk_gate gate;
 	struct clk *clk;
 };
 
@@ -125,16 +126,6 @@ static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct device *dev = chip->dev;
 	int err;
 
-	if (channel->clk_parent) {
-		err = clk_set_parent(channel->clk, channel->clk_parent);
-		if (err < 0) {
-			dev_err(dev, "failed to set parent %s for %s: %d\n",
-				__clk_get_name(channel->clk_parent),
-				__clk_get_name(channel->clk), err);
-			return err;
-		}
-	}
-
 	err = clk_prepare_enable(channel->clk);
 	if (err < 0) {
 		dev_err(dev, "failed to enable clock %s: %d\n",
@@ -157,9 +148,9 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 			  const struct pwm_state *state)
 {
 	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
-	unsigned int pre_div, cnt, duty_cnt;
+	unsigned int cnt, duty_cnt;
 	unsigned long fin_freq;
-	u64 duty, period;
+	u64 duty, period, freq;
 
 	duty = state->duty_cycle;
 	period = state->period;
@@ -173,7 +164,11 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 	if (state->polarity == PWM_POLARITY_INVERSED)
 		duty = period - duty;
 
-	fin_freq = clk_get_rate(channel->clk);
+	freq = div64_u64(NSEC_PER_SEC * 0xffffULL, period);
+	if (freq > ULONG_MAX)
+		freq = ULONG_MAX;
+
+	fin_freq = clk_round_rate(channel->clk, freq);
 	if (fin_freq == 0) {
 		dev_err(meson->chip.dev, "invalid source clock frequency\n");
 		return -EINVAL;
@@ -181,40 +176,31 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 
 	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
 
-	pre_div = div64_u64(fin_freq * period, NSEC_PER_SEC * 0xffffLL);
-	if (pre_div > MISC_CLK_DIV_MASK) {
-		dev_err(meson->chip.dev, "unable to get period pre_div\n");
-		return -EINVAL;
-	}
-
-	cnt = div64_u64(fin_freq * period, NSEC_PER_SEC * (pre_div + 1));
+	cnt = div_u64(fin_freq * period, NSEC_PER_SEC);
 	if (cnt > 0xffff) {
 		dev_err(meson->chip.dev, "unable to get period cnt\n");
 		return -EINVAL;
 	}
 
-	dev_dbg(meson->chip.dev, "period=%llu pre_div=%u cnt=%u\n", period,
-		pre_div, cnt);
+	dev_dbg(meson->chip.dev, "period=%llu cnt=%u\n", period, cnt);
 
 	if (duty == period) {
-		channel->pre_div = pre_div;
 		channel->hi = cnt;
 		channel->lo = 0;
 	} else if (duty == 0) {
-		channel->pre_div = pre_div;
 		channel->hi = 0;
 		channel->lo = cnt;
 	} else {
-		duty_cnt = div64_u64(fin_freq * duty, NSEC_PER_SEC * (pre_div + 1));
+		duty_cnt = div_u64(fin_freq * duty, NSEC_PER_SEC);
 
-		dev_dbg(meson->chip.dev, "duty=%llu pre_div=%u duty_cnt=%u\n",
-			duty, pre_div, duty_cnt);
+		dev_dbg(meson->chip.dev, "duty=%llu duty_cnt=%u\n", duty, duty_cnt);
 
-		channel->pre_div = pre_div;
 		channel->hi = duty_cnt;
 		channel->lo = cnt - duty_cnt;
 	}
 
+	channel->rate = fin_freq;
+
 	return 0;
 }
 
@@ -224,16 +210,15 @@ static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
 	struct meson_pwm_channel_data *channel_data;
 	unsigned long flags;
 	u32 value;
+	int err;
 
 	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
 
-	spin_lock_irqsave(&meson->lock, flags);
+	err = clk_set_rate(channel->clk, channel->rate);
+	if (err)
+		dev_err(meson->chip.dev, "setting clock rate failed\n");
 
-	value = readl(meson->base + REG_MISC_AB);
-	value &= ~(MISC_CLK_DIV_MASK << channel_data->clk_div_shift);
-	value |= channel->pre_div << channel_data->clk_div_shift;
-	value |= channel_data->clk_en_mask;
-	writel(value, meson->base + REG_MISC_AB);
+	spin_lock_irqsave(&meson->lock, flags);
 
 	value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
 		FIELD_PREP(PWM_LOW_MASK, channel->lo);
@@ -272,16 +257,16 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			/*
 			 * This IP block revision doesn't have an "always high"
 			 * setting which we can use for "inverted disabled".
-			 * Instead we achieve this using the same settings
-			 * that we use a pre_div of 0 (to get the shortest
-			 * possible duration for one "count") and
-			 * "period == duty_cycle". This results in a signal
+			 * Instead we achieve this by setting mux parent with
+			 * highest rate and minimum divider value, resulting
+			 * in the shortest possible duration for one "count"
+			 * and "period == duty_cycle". This results in a signal
 			 * which is LOW for one "count", while being HIGH for
 			 * the rest of the (so the signal is HIGH for slightly
 			 * less than 100% of the period, but this is the best
 			 * we can achieve).
 			 */
-			channel->pre_div = 0;
+			channel->rate = ULONG_MAX;
 			channel->hi = ~0;
 			channel->lo = 0;
 
@@ -300,13 +285,12 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
-static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip,
-					struct pwm_device *pwm, u32 cnt)
+static u64 meson_pwm_cnt_to_ns(struct pwm_chip *chip, struct pwm_device *pwm,
+			       u32 cnt)
 {
 	struct meson_pwm *meson = to_meson_pwm(chip);
 	struct meson_pwm_channel *channel;
 	unsigned long fin_freq;
-	u32 fin_ns;
 
 	/* to_meson_pwm() can only be used after .get_state() is called */
 	channel = &meson->channels[pwm->hwpwm];
@@ -315,9 +299,7 @@ static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip,
 	if (fin_freq == 0)
 		return 0;
 
-	fin_ns = div_u64(NSEC_PER_SEC, fin_freq);
-
-	return cnt * fin_ns * (channel->pre_div + 1);
+	return div64_ul(NSEC_PER_SEC * (u64)cnt, fin_freq);
 }
 
 static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -326,7 +308,7 @@ static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct meson_pwm *meson = to_meson_pwm(chip);
 	struct meson_pwm_channel_data *channel_data;
 	struct meson_pwm_channel *channel;
-	u32 value, tmp;
+	u32 value;
 
 	if (!state)
 		return 0;
@@ -335,15 +317,9 @@ static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
 
 	value = readl(meson->base + REG_MISC_AB);
-
-	tmp = channel_data->pwm_en_mask | channel_data->clk_en_mask;
-	state->enabled = (value & tmp) == tmp;
-
-	tmp = value >> channel_data->clk_div_shift;
-	channel->pre_div = FIELD_GET(MISC_CLK_DIV_MASK, tmp);
+	state->enabled = value & channel_data->pwm_en_mask;
 
 	value = readl(meson->base + channel_data->reg_offset);
-
 	channel->lo = FIELD_GET(PWM_LOW_MASK, value);
 	channel->hi = FIELD_GET(PWM_HIGH_MASK, value);
 
@@ -473,6 +449,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson)
 
 	for (i = 0; i < meson->chip.npwm; i++) {
 		struct meson_pwm_channel *channel = &meson->channels[i];
+		struct clk_parent_data div_parent = {}, gate_parent = {};
 		struct clk_init_data init = {};
 
 		snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
@@ -492,18 +469,63 @@ static int meson_pwm_init_channels(struct meson_pwm *meson)
 		channel->mux.table = NULL;
 		channel->mux.hw.init = &init;
 
-		channel->clk = devm_clk_register(dev, &channel->mux.hw);
-		if (IS_ERR(channel->clk)) {
-			err = PTR_ERR(channel->clk);
+		err = devm_clk_hw_register(dev, &channel->mux.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "%s#div%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_divider_ops;
+		init.flags = CLK_SET_RATE_PARENT;
+		div_parent.index = -1;
+		div_parent.hw = &channel->mux.hw;
+		init.parent_data = &div_parent;
+		init.num_parents = 1;
+
+		channel->div.reg = meson->base + REG_MISC_AB;
+		channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
+		channel->div.width = MISC_CLK_DIV_WIDTH;
+		channel->div.hw.init = &init;
+		channel->div.flags = 0;
+		channel->div.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->div.hw);
+		if (err) {
 			dev_err(dev, "failed to register %s: %d\n", name, err);
 			return err;
 		}
 
-		snprintf(name, sizeof(name), "clkin%u", i);
+		snprintf(name, sizeof(name), "%s#gate%u", dev_name(dev), i);
 
-		channel->clk_parent = devm_clk_get_optional(dev, name);
-		if (IS_ERR(channel->clk_parent))
-			return PTR_ERR(channel->clk_parent);
+		init.name = name;
+		init.ops = &clk_gate_ops;
+		init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+		gate_parent.index = -1;
+		gate_parent.hw = &channel->div.hw;
+		init.parent_data = &gate_parent;
+		init.num_parents = 1;
+
+		channel->gate.reg = meson->base + REG_MISC_AB;
+		channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+		channel->gate.hw.init = &init;
+		channel->gate.flags = 0;
+		channel->gate.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->gate.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
 	}
 
 	return 0;