summaryrefslogtreecommitdiff
path: root/drivers/net/pci-skeleton.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/pci-skeleton.c
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/pci-skeleton.c')
-rw-r--r--drivers/net/pci-skeleton.c1977
1 files changed, 1977 insertions, 0 deletions
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
new file mode 100644
index 000000000000..bb1c3d8981ee
--- /dev/null
+++ b/drivers/net/pci-skeleton.c
@@ -0,0 +1,1977 @@
+/*
+
+ drivers/net/pci-skeleton.c
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+
+ Original code came from 8139too.c, which in turns was based
+ originally on Donald Becker's rtl8139.c driver, versions 1.11
+ and older. This driver was originally based on rtl8139.c
+ version 1.07. Header of rtl8139.c version 1.11:
+
+ -----<snip>-----
+
+ Written 1997-2000 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+
+-----------------------------------------------------------------------------
+
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the RealTek RTL8139 series, the RealTek
+Fast Ethernet controllers for PCI and CardBus. This chip is used on many
+low-end boards, sometimes with its markings changed.
+
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS will assign the
+PCI INTA signal to a (preferably otherwise unused) system IRQ line.
+
+III. Driver operation
+
+IIIa. Rx Ring buffers
+
+The receive unit uses a single linear ring buffer rather than the more
+common (and more efficient) descriptor-based architecture. Incoming frames
+are sequentially stored into the Rx region, and the host copies them into
+skbuffs.
+
+Comment: While it is theoretically possible to process many frames in place,
+any delay in Rx processing would cause us to drop frames. More importantly,
+the Linux protocol stack is not designed to operate in this manner.
+
+IIIb. Tx operation
+
+The RTL8139 uses a fixed set of four Tx descriptors in register space.
+In a stunningly bad design choice, Tx frames must be 32 bit aligned. Linux
+aligns the IP header on word boundaries, and 14 byte ethernet header means
+that almost all frames will need to be copied to an alignment buffer.
+
+IVb. References
+
+http://www.realtek.com.tw/cn/cn.html
+http://www.scyld.com/expert/NWay.html
+
+IVc. Errata
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <asm/io.h>
+
+#define NETDRV_VERSION "1.0.0"
+#define MODNAME "netdrv"
+#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
+#define PFX MODNAME ": "
+
+static char version[] __devinitdata =
+KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
+KERN_INFO " Support available from http://foo.com/bar/baz.html\n";
+
+/* define to 1 to enable PIO instead of MMIO */
+#undef USE_IO_OPS
+
+/* define to 1 to enable copious debugging info */
+#undef NETDRV_DEBUG
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef NETDRV_NDEBUG
+
+
+#ifdef NETDRV_DEBUG
+/* note: prints function name for you */
+# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+#else
+# define DPRINTK(fmt, args...)
+#endif
+
+#ifdef NETDRV_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(!(expr)) { \
+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr,__FILE__,__FUNCTION__,__LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* Size of the in-memory receive ring. */
+#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define NETDRV_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define NETDRV_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG
+
+typedef enum {
+ RTL8139 = 0,
+ NETDRV_CB,
+ SMC1211TX,
+ /*MPX5030,*/
+ DELTA8139,
+ ADDTRON8139,
+} board_t;
+
+
+/* indexed by board_t, above */
+static struct {
+ const char *name;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139 Fast Ethernet" },
+ { "RealTek RTL8139B PCI/CardBus" },
+ { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
+/* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
+ { "Delta Electronics 8139 10/100BaseTX" },
+ { "Addtron Technolgy 8139 10/100BaseTX" },
+};
+
+
+static struct pci_device_id netdrv_pci_tbl[] = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
+/* {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
+ {0,}
+};
+MODULE_DEVICE_TABLE (pci, netdrv_pci_tbl);
+
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum NETDRV_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ RxEarlyCnt = 0x34,
+ RxEarlyStatus = 0x36,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ ChipVersion = 0x43,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ FlashReg = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+};
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ TxIFG1 = (1 << 25), /* Interframe Gap Time */
+ TxIFG0 = (1 << 24), /* Enabling these bits violates IEEE 802.3 */
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ Cfg1_LWAKE = 0x10,
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+};
+
+enum RxConfigBits {
+ /* Early Rx threshold, none or X/16 */
+ RxCfgEarlyRxNone = 0,
+ RxCfgEarlyRxShift = 24,
+
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer */
+ RxNoWrap = (1 << 7),
+};
+
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+
+#define PARA78_default 0x78fa8388
+#define PARA7c_default 0xcb38de43 /* param[0][3] */
+#define PARA7c_xxx 0xcb38de43
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+struct ring_info {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+};
+
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+} chip_t;
+
+
+/* directly indexed by chip_t, above */
+const static struct {
+ const char *name;
+ u8 version; /* from RTL8139C docs */
+ u32 RxConfigMask; /* should clear the bits supported by this chip */
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ 0x40,
+ 0xf0fe0040, /* XXX copied from RTL8139A, verify */
+ },
+
+ { "RTL-8139 rev K",
+ 0x60,
+ 0xf0fe0040,
+ },
+
+ { "RTL-8139A",
+ 0x70,
+ 0xf0fe0040,
+ },
+
+ { "RTL-8139B",
+ 0x78,
+ 0xf0fc0040
+ },
+
+ { "RTL-8130",
+ 0x7C,
+ 0xf0fe0040, /* XXX copied from RTL8139A, verify */
+ },
+
+ { "RTL-8139C",
+ 0x74,
+ 0xf0fc0040, /* XXX copied from RTL8139B, verify */
+ },
+
+};
+
+
+struct netdrv_private {
+ board_t board;
+ void *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ struct net_device_stats stats;
+ struct timer_list timer; /* Media selection timer. */
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
+ unsigned int tx_flag;
+ atomic_t cur_tx;
+ atomic_t dirty_tx;
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct ring_info tx_info[NUM_TX_DESC];
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_bufs_dma;
+ char phys[4]; /* MII device addresses. */
+ char twistie, twist_row, twist_col; /* Twister tune state. */
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int duplex_lock:1;
+ unsigned int default_port:4; /* Last dev->if_port value. */
+ unsigned int media2:4; /* Secondary monitored media port. */
+ unsigned int medialock:1; /* Don't sense media type. */
+ unsigned int mediasense:1; /* Media sensing in progress. */
+ spinlock_t lock;
+ chip_t chipset;
+};
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM (multicast_filter_limit, "i");
+MODULE_PARM (max_interrupt_work, "i");
+MODULE_PARM (media, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
+MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
+
+static int read_eeprom (void *ioaddr, int location, int addr_len);
+static int netdrv_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void netdrv_timer (unsigned long data);
+static void netdrv_tx_timeout (struct net_device *dev);
+static void netdrv_init_ring (struct net_device *dev);
+static int netdrv_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t netdrv_interrupt (int irq, void *dev_instance,
+ struct pt_regs *regs);
+static int netdrv_close (struct net_device *dev);
+static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *netdrv_get_stats (struct net_device *dev);
+static void netdrv_set_rx_mode (struct net_device *dev);
+static void netdrv_hw_start (struct net_device *dev);
+
+
+#ifdef USE_IO_OPS
+
+#define NETDRV_R8(reg) inb (((unsigned long)ioaddr) + (reg))
+#define NETDRV_R16(reg) inw (((unsigned long)ioaddr) + (reg))
+#define NETDRV_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg)))
+#define NETDRV_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W8_F NETDRV_W8
+#define NETDRV_W16_F NETDRV_W16
+#define NETDRV_W32_F NETDRV_W32
+#undef readb
+#undef readw
+#undef readl
+#undef writeb
+#undef writew
+#undef writel
+#define readb(addr) inb((unsigned long)(addr))
+#define readw(addr) inw((unsigned long)(addr))
+#define readl(addr) inl((unsigned long)(addr))
+#define writeb(val,addr) outb((val),(unsigned long)(addr))
+#define writew(val,addr) outw((val),(unsigned long)(addr))
+#define writel(val,addr) outl((val),(unsigned long)(addr))
+
+#else
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define NETDRV_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0)
+#define NETDRV_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0)
+#define NETDRV_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
+
+
+#if MMIO_FLUSH_AUDIT_COMPLETE
+
+/* write MMIO register */
+#define NETDRV_W8(reg, val8) writeb ((val8), ioaddr + (reg))
+#define NETDRV_W16(reg, val16) writew ((val16), ioaddr + (reg))
+#define NETDRV_W32(reg, val32) writel ((val32), ioaddr + (reg))
+
+#else
+
+/* write MMIO register, then flush */
+#define NETDRV_W8 NETDRV_W8_F
+#define NETDRV_W16 NETDRV_W16_F
+#define NETDRV_W32 NETDRV_W32_F
+
+#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
+
+/* read MMIO register */
+#define NETDRV_R8(reg) readb (ioaddr + (reg))
+#define NETDRV_R16(reg) readw (ioaddr + (reg))
+#define NETDRV_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
+
+#endif /* USE_IO_OPS */
+
+
+static const u16 netdrv_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const unsigned int netdrv_rx_config =
+ RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+
+
+static int __devinit netdrv_init_board (struct pci_dev *pdev,
+ struct net_device **dev_out,
+ void **ioaddr_out)
+{
+ void *ioaddr = NULL;
+ struct net_device *dev;
+ struct netdrv_private *tp;
+ int rc, i;
+ u32 pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 tmp;
+
+ DPRINTK ("ENTER\n");
+
+ assert (pdev != NULL);
+ assert (ioaddr_out != NULL);
+
+ *ioaddr_out = NULL;
+ *dev_out = NULL;
+
+ /* dev zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ printk (KERN_ERR PFX "unable to alloc new ethernet\n");
+ DPRINTK ("EXIT, returning -ENOMEM\n");
+ return -ENOMEM;
+ }
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ tp = dev->priv;
+
+ /* enable device (incl. PCI PM wakeup), and bus-mastering */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ DPRINTK("PIO region size == 0x%02X\n", pio_len);
+ DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ /* check for weird/broken PCI region reporting */
+ if ((pio_len < NETDRV_MIN_IO_SIZE) ||
+ (mmio_len < NETDRV_MIN_IO_SIZE)) {
+ printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ rc = pci_request_regions (pdev, "pci-skeleton");
+ if (rc)
+ goto err_out;
+
+ pci_set_master (pdev);
+
+#ifdef USE_IO_OPS
+ ioaddr = (void *) pio_start;
+#else
+ /* ioremap MMIO region */
+ ioaddr = ioremap (mmio_start, mmio_len);
+ if (ioaddr == NULL) {
+ printk (KERN_ERR PFX "cannot remap MMIO, aborting\n");
+ rc = -EIO;
+ goto err_out_free_res;
+ }
+#endif /* USE_IO_OPS */
+
+ /* Soft reset the chip. */
+ NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--)
+ if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ else
+ udelay (10);
+
+ /* Bring the chip out of low-power mode. */
+ /* <insert device-specific code here> */
+
+#ifndef USE_IO_OPS
+ /* sanity checks -- ensure PIO and MMIO registers agree */
+ assert (inb (pio_start+Config0) == readb (ioaddr+Config0));
+ assert (inb (pio_start+Config1) == readb (ioaddr+Config1));
+ assert (inb (pio_start+TxConfig) == readb (ioaddr+TxConfig));
+ assert (inb (pio_start+RxConfig) == readb (ioaddr+RxConfig));
+#endif /* !USE_IO_OPS */
+
+ /* identify chip attached to board */
+ tmp = NETDRV_R8 (ChipVersion);
+ for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--)
+ if (tmp == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n",
+ pci_name(pdev));
+ printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pci_name(pdev), NETDRV_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+ tmp,
+ tp->chipset,
+ rtl_chip_info[tp->chipset].name);
+
+ i = register_netdev (dev);
+ if (i)
+ goto err_out_unmap;
+
+ DPRINTK ("EXIT, returning 0\n");
+ *ioaddr_out = ioaddr;
+ *dev_out = dev;
+ return 0;
+
+err_out_unmap:
+#ifndef USE_IO_OPS
+ iounmap(ioaddr);
+err_out_free_res:
+#endif
+ pci_release_regions (pdev);
+err_out:
+ free_netdev (dev);
+ DPRINTK ("EXIT, returning %d\n", rc);
+ return rc;
+}
+
+
+static int __devinit netdrv_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct netdrv_private *tp;
+ int i, addr_len, option;
+ void *ioaddr = NULL;
+ static int board_idx = -1;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(version);
+#endif
+
+ DPRINTK ("ENTER\n");
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ i = netdrv_init_board (pdev, &dev, &ioaddr);
+ if (i < 0) {
+ DPRINTK ("EXIT, returning %d\n", i);
+ return i;
+ }
+
+ tp = dev->priv;
+
+ assert (ioaddr != NULL);
+ assert (dev != NULL);
+ assert (tp != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((u16 *) (dev->dev_addr))[i] =
+ le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->open = netdrv_open;
+ dev->hard_start_xmit = netdrv_start_xmit;
+ dev->stop = netdrv_close;
+ dev->get_stats = netdrv_get_stats;
+ dev->set_multicast_list = netdrv_set_rx_mode;
+ dev->do_ioctl = netdrv_ioctl;
+ dev->tx_timeout = netdrv_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) ioaddr;
+
+ /* dev->priv/tp zeroed and aligned in alloc_etherdev */
+ tp = dev->priv;
+
+ /* note: tp->chipset set in netdrv_init_board */
+ tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | NETDRV_CAPS;
+ tp->pci_dev = pdev;
+ tp->board = ent->driver_data;
+ tp->mmio_addr = ioaddr;
+ spin_lock_init(&tp->lock);
+
+ pci_set_drvdata(pdev, dev);
+
+ tp->phys[0] = 32;
+
+ printk (KERN_INFO "%s: %s at 0x%lx, "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
+ "IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5],
+ dev->irq);
+
+ printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Put the chip into low-power mode. */
+ NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
+
+ /* The lower four bits are the media type. */
+ option = (board_idx > 7) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->full_duplex = (option & 0x200) ? 1 : 0;
+ tp->default_port = option & 15;
+ if (tp->default_port)
+ tp->medialock = 1;
+ }
+
+ if (tp->full_duplex) {
+ printk (KERN_INFO
+ "%s: Media type forced to Full Duplex.\n",
+ dev->name);
+ mdio_write (dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
+ tp->duplex_lock = 1;
+ }
+
+ DPRINTK ("EXIT - returning 0\n");
+ return 0;
+}
+
+
+static void __devexit netdrv_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct netdrv_private *np;
+
+ DPRINTK ("ENTER\n");
+
+ assert (dev != NULL);
+
+ np = dev->priv;
+ assert (np != NULL);
+
+ unregister_netdev (dev);
+
+#ifndef USE_IO_OPS
+ iounmap (np->mmio_addr);
+#endif /* !USE_IO_OPS */
+
+ pci_release_regions (pdev);
+
+ free_netdev (dev);
+
+ pci_set_drvdata (pdev, NULL);
+
+ pci_disable_device (pdev);
+
+ DPRINTK ("EXIT\n");
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() readl(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ void *ee_addr = ioaddr + Cfg9346;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ DPRINTK ("ENTER\n");
+
+ writeb (EE_ENB & ~EE_CS, ee_addr);
+ writeb (EE_ENB, ee_addr);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ writeb (EE_ENB | dataval, ee_addr);
+ eeprom_delay ();
+ writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay ();
+ }
+ writeb (EE_ENB, ee_addr);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
+ 0);
+ writeb (EE_ENB, ee_addr);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ writeb (~EE_CS, ee_addr);
+ eeprom_delay ();
+
+ DPRINTK ("EXIT - returning %d\n", retval);
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() readb(mdio_addr)
+
+
+static char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void *mdio_addr)
+{
+ int i;
+
+ DPRINTK ("ENTER\n");
+
+ for (i = 32; i >= 0; i--) {
+ writeb (MDIO_WRITE1, mdio_addr);
+ mdio_delay ();
+ writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr);
+ mdio_delay ();
+ }
+
+ DPRINTK ("EXIT\n");
+}
+
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *mdio_addr = tp->mmio_addr + Config4;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int retval = 0;
+ int i;
+
+ DPRINTK ("ENTER\n");
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ DPRINTK ("EXIT after directly using 8139 internal regs\n");
+ return location < 8 && mii_2_8139_map[location] ?
+ readw (tp->mmio_addr + mii_2_8139_map[location]) : 0;
+ }
+ mdio_sync (mdio_addr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ writeb (MDIO_DIR | dataval, mdio_addr);
+ mdio_delay ();
+ writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ writeb (0, mdio_addr);
+ mdio_delay ();
+ retval =
+ (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1
+ : 0);
+ writeb (MDIO_CLK, mdio_addr);
+ mdio_delay ();
+ }
+
+ DPRINTK ("EXIT, returning %d\n", (retval >> 1) & 0xffff);
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *mdio_addr = tp->mmio_addr + Config4;
+ int mii_cmd =
+ (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+
+ DPRINTK ("ENTER\n");
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ if (location < 8 && mii_2_8139_map[location]) {
+ writew (value,
+ tp->mmio_addr + mii_2_8139_map[location]);
+ readw (tp->mmio_addr + mii_2_8139_map[location]);
+ }
+ DPRINTK ("EXIT after directly using 8139 internal regs\n");
+ return;
+ }
+ mdio_sync (mdio_addr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ writeb (dataval, mdio_addr);
+ mdio_delay ();
+ writeb (dataval | MDIO_CLK, mdio_addr);
+ mdio_delay ();
+ }
+
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ writeb (0, mdio_addr);
+ mdio_delay ();
+ writeb (MDIO_CLK, mdio_addr);
+ mdio_delay ();
+ }
+
+ DPRINTK ("EXIT\n");
+}
+
+
+static int netdrv_open (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ int retval;
+#ifdef NETDRV_DEBUG
+ void *ioaddr = tp->mmio_addr;
+#endif
+
+ DPRINTK ("ENTER\n");
+
+ retval = request_irq (dev->irq, netdrv_interrupt, SA_SHIRQ, dev->name, dev);
+ if (retval) {
+ DPRINTK ("EXIT, returning %d\n", retval);
+ return retval;
+ }
+
+ tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma);
+ tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ DPRINTK ("EXIT, returning -ENOMEM\n");
+ return -ENOMEM;
+
+ }
+
+ tp->full_duplex = tp->duplex_lock;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ netdrv_init_ring (dev);
+ netdrv_hw_start (dev);
+
+ DPRINTK ("%s: netdrv_open() ioaddr %#lx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n",
+ dev->name, pci_resource_start (tp->pci_dev, 1),
+ dev->irq, NETDRV_R8 (MediaStatus),
+ tp->full_duplex ? "full" : "half");
+
+ /* Set the timer to switch to check for link beat and perhaps switch
+ to an alternate media type. */
+ init_timer (&tp->timer);
+ tp->timer.expires = jiffies + 3 * HZ;
+ tp->timer.data = (unsigned long) dev;
+ tp->timer.function = &netdrv_timer;
+ add_timer (&tp->timer);
+
+ DPRINTK ("EXIT, returning 0\n");
+ return 0;
+}
+
+
+/* Start the hardware at open or resume. */
+static void netdrv_hw_start (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ u32 i;
+
+ DPRINTK ("ENTER\n");
+
+ /* Soft reset the chip. */
+ NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
+ udelay (100);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--)
+ if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+
+ /* Restore our idea of the MAC address. */
+ NETDRV_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ NETDRV_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
+ CmdRxEnb | CmdTxEnb);
+
+ i = netdrv_rx_config |
+ (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ NETDRV_W32_F (RxConfig, i);
+
+ /* Check this value: the documentation for IFG contradicts ifself. */
+ NETDRV_W32 (TxConfig, (TX_DMA_BURST << TxDMAShift));
+
+ /* unlock Config[01234] and BMCR register writes */
+ NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
+ udelay (10);
+
+ tp->cur_rx = 0;
+
+ /* Lock Config[01234] and BMCR register writes */
+ NETDRV_W8_F (Cfg9346, Cfg9346_Lock);
+ udelay (10);
+
+ /* init Rx ring buffer DMA address */
+ NETDRV_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ NETDRV_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ NETDRV_W32_F (RxMissed, 0);
+
+ netdrv_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ NETDRV_W16 (MultiIntr, NETDRV_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
+ CmdRxEnb | CmdTxEnb);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ NETDRV_W16_F (IntrMask, netdrv_intr_mask);
+
+ netif_start_queue (dev);
+
+ DPRINTK ("EXIT\n");
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void netdrv_init_ring (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ int i;
+
+ DPRINTK ("ENTER\n");
+
+ tp->cur_rx = 0;
+ atomic_set (&tp->cur_tx, 0);
+ atomic_set (&tp->dirty_tx, 0);
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ tp->tx_info[i].skb = NULL;
+ tp->tx_info[i].mapping = 0;
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+ }
+
+ DPRINTK ("EXIT\n");
+}
+
+
+static void netdrv_timer (unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ int next_tick = 60 * HZ;
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->duplex_lock && mii_lpa != 0xffff) {
+ int duplex = (mii_lpa & LPA_100FULL)
+ || (mii_lpa & 0x01C0) == 0x0040;
+ if (tp->full_duplex != duplex) {
+ tp->full_duplex = duplex;
+ printk (KERN_INFO
+ "%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n", dev->name,
+ tp->full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
+ NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+
+ DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, NETDRV_R16 (NWayLPAR));
+ DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x"
+ " RxStatus %4.4x.\n", dev->name,
+ NETDRV_R16 (IntrMask),
+ NETDRV_R16 (IntrStatus),
+ NETDRV_R32 (RxEarlyStatus));
+ DPRINTK ("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, NETDRV_R8 (Config0),
+ NETDRV_R8 (Config1));
+
+ tp->timer.expires = jiffies + next_tick;
+ add_timer (&tp->timer);
+}
+
+
+static void netdrv_tx_clear (struct netdrv_private *tp)
+{
+ int i;
+
+ atomic_set (&tp->cur_tx, 0);
+ atomic_set (&tp->dirty_tx, 0);
+
+ /* Dump the unsent Tx packets. */
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ struct ring_info *rp = &tp->tx_info[i];
+ if (rp->mapping != 0) {
+ pci_unmap_single (tp->pci_dev, rp->mapping,
+ rp->skb->len, PCI_DMA_TODEVICE);
+ rp->mapping = 0;
+ }
+ if (rp->skb) {
+ dev_kfree_skb (rp->skb);
+ rp->skb = NULL;
+ tp->stats.tx_dropped++;
+ }
+ }
+}
+
+
+static void netdrv_tx_timeout (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+ unsigned long flags;
+
+ DPRINTK ("%s: Transmit timeout, status %2.2x %4.4x "
+ "media %2.2x.\n", dev->name,
+ NETDRV_R8 (ChipCmd),
+ NETDRV_R16 (IntrStatus),
+ NETDRV_R8 (MediaStatus));
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = NETDRV_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ NETDRV_W8 (ChipCmd, tmp8 & ~CmdTxEnb);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ NETDRV_W16 (IntrMask, 0x0000);
+
+ /* Emit info to figure out what went wrong. */
+ printk (KERN_DEBUG "%s: Tx queue start entry %d dirty entry %d.\n",
+ dev->name, atomic_read (&tp->cur_tx),
+ atomic_read (&tp->dirty_tx));
+ for (i = 0; i < NUM_TX_DESC; i++)
+ printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, NETDRV_R32 (TxStatus0 + (i * 4)),
+ i == atomic_read (&tp->dirty_tx) % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irqsave (&tp->lock, flags);
+
+ netdrv_tx_clear (tp);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ /* ...and finally, reset everything */
+ netdrv_hw_start (dev);
+
+ netif_wake_queue (dev);
+}
+
+
+
+static int netdrv_start_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ int entry;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = atomic_read (&tp->cur_tx) % NUM_TX_DESC;
+
+ assert (tp->tx_info[entry].skb == NULL);
+ assert (tp->tx_info[entry].mapping == 0);
+
+ tp->tx_info[entry].skb = skb;
+ /* tp->tx_info[entry].mapping = 0; */
+ memcpy (tp->tx_buf[entry], skb->data, skb->len);
+
+ /* Note: the chip doesn't have auto-pad! */
+ NETDRV_W32 (TxStatus0 + (entry * sizeof(u32)),
+ tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+ atomic_inc (&tp->cur_tx);
+ if ((atomic_read (&tp->cur_tx) - atomic_read (&tp->dirty_tx)) >= NUM_TX_DESC)
+ netif_stop_queue (dev);
+
+ DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n",
+ dev->name, skb->data, skb->len, entry);
+
+ return 0;
+}
+
+
+static void netdrv_tx_interrupt (struct net_device *dev,
+ struct netdrv_private *tp,
+ void *ioaddr)
+{
+ int cur_tx, dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = atomic_read (&tp->dirty_tx);
+
+ cur_tx = atomic_read (&tp->cur_tx);
+ tx_left = cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = NETDRV_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ DPRINTK ("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ tp->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ tp->stats.tx_aborted_errors++;
+ NETDRV_W32 (TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
+ }
+ if (txstatus & TxCarrierLost)
+ tp->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ tp->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ tp->stats.tx_fifo_errors++;
+ }
+ tp->stats.collisions += (txstatus >> 24) & 15;
+ tp->stats.tx_bytes += txstatus & 0x7ff;
+ tp->stats.tx_packets++;
+ }
+
+ /* Free the original skb. */
+ if (tp->tx_info[entry].mapping != 0) {
+ pci_unmap_single(tp->pci_dev,
+ tp->tx_info[entry].mapping,
+ tp->tx_info[entry].skb->len,
+ PCI_DMA_TODEVICE);
+ tp->tx_info[entry].mapping = 0;
+ }
+ dev_kfree_skb_irq (tp->tx_info[entry].skb);
+ tp->tx_info[entry].skb = NULL;
+ dirty_tx++;
+ if (dirty_tx < 0) { /* handle signed int overflow */
+ atomic_sub (cur_tx, &tp->cur_tx); /* XXX racy? */
+ dirty_tx = cur_tx - tx_left + 1;
+ }
+ if (netif_queue_stopped (dev))
+ netif_wake_queue (dev);
+
+ cur_tx = atomic_read (&tp->cur_tx);
+ tx_left = cur_tx - dirty_tx;
+
+ }
+
+#ifndef NETDRV_NDEBUG
+ if (atomic_read (&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
+ printk (KERN_ERR
+ "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
+ dev->name, dirty_tx, atomic_read (&tp->cur_tx));
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* NETDRV_NDEBUG */
+
+ atomic_set (&tp->dirty_tx, dirty_tx);
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void netdrv_rx_err (u32 rx_status, struct net_device *dev,
+ struct netdrv_private *tp, void *ioaddr)
+{
+ u8 tmp8;
+ int tmp_work = 1000;
+
+ DPRINTK ("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ if (rx_status & RxTooLong) {
+ DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ tp->stats.rx_errors++;
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ tp->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ tp->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ tp->stats.rx_crc_errors++;
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+ tp->cur_rx = 0;
+
+ /* disable receive */
+ tmp8 = NETDRV_R8 (ChipCmd) & ChipCmdClear;
+ NETDRV_W8_F (ChipCmd, tmp8 | CmdTxEnb);
+
+ /* A.C.: Reset the multicast list. */
+ netdrv_set_rx_mode (dev);
+
+ /* XXX potentially temporary hack to
+ * restart hung receiver */
+ while (--tmp_work > 0) {
+ tmp8 = NETDRV_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ NETDRV_W8_F (ChipCmd,
+ (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
+ }
+
+ /* G.S.: Re-enable receiver */
+ /* XXX temporary hack to work around receiver hang */
+ netdrv_set_rx_mode (dev);
+
+ if (tmp_work <= 0)
+ printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+}
+
+
+/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
+ field alignments and semantics. */
+static void netdrv_rx_interrupt (struct net_device *dev,
+ struct netdrv_private *tp, void *ioaddr)
+{
+ unsigned char *rx_ring;
+ u16 cur_rx;
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ rx_ring = tp->rx_ring;
+ cur_rx = tp->cur_rx;
+
+ DPRINTK ("%s: In netdrv_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ NETDRV_R16 (RxBufAddr),
+ NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+
+ while ((NETDRV_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ int ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int rx_size;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ DPRINTK ("%s: netdrv_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+#if NETDRV_DEBUG > 2
+ {
+ int i;
+ DPRINTK ("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ printk (" %2.2x",
+ rx_ring[ring_offset + i]);
+ printk (".\n");
+ }
+#endif
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (!(rx_status & RxStatusOK))) {
+ netdrv_rx_err (rx_status, dev, tp, ioaddr);
+ return;
+ }
+
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ /* TODO: consider allocating skb's outside of
+ * interrupt context, both to speed interrupt processing,
+ * and also to reduce the chances of having to
+ * drop packets here under memory pressure.
+ */
+
+ skb = dev_alloc_skb (pkt_size + 2);
+ if (skb) {
+ skb->dev = dev;
+ skb_reserve (skb, 2); /* 16 byte align the IP fields. */
+
+ eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+ netif_rx (skb);
+ dev->last_rx = jiffies;
+ tp->stats.rx_bytes += pkt_size;
+ tp->stats.rx_packets++;
+ } else {
+ printk (KERN_WARNING
+ "%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ tp->stats.rx_dropped++;
+ }
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ NETDRV_W16_F (RxBufPtr, cur_rx - 16);
+ }
+
+ DPRINTK ("%s: Done netdrv_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ NETDRV_R16 (RxBufAddr),
+ NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+}
+
+
+static void netdrv_weird_interrupt (struct net_device *dev,
+ struct netdrv_private *tp,
+ void *ioaddr,
+ int status, int link_changed)
+{
+ printk (KERN_DEBUG "%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
+ NETDRV_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ /* Really link-change on new chips. */
+ int lpar = NETDRV_R16 (NWayLPAR);
+ int duplex = (lpar & 0x0100) || (lpar & 0x01C0) == 0x0040
+ || tp->duplex_lock;
+ if (tp->full_duplex != duplex) {
+ tp->full_duplex = duplex;
+ NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
+ NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ status &= ~RxUnderrun;
+ }
+
+ /* XXX along with netdrv_rx_err, are we double-counting errors? */
+ if (status &
+ (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
+ tp->stats.rx_errors++;
+
+ if (status & (PCSTimeout))
+ tp->stats.rx_length_errors++;
+ if (status & (RxUnderrun | RxFIFOOver))
+ tp->stats.rx_fifo_errors++;
+ if (status & RxOverflow) {
+ tp->stats.rx_over_errors++;
+ tp->cur_rx = NETDRV_R16 (RxBufAddr) % RX_BUF_LEN;
+ NETDRV_W16_F (RxBufPtr, tp->cur_rx - 16);
+ }
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+
+ printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t netdrv_interrupt (int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct netdrv_private *tp = dev->priv;
+ int boguscnt = max_interrupt_work;
+ void *ioaddr = tp->mmio_addr;
+ int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ spin_lock (&tp->lock);
+
+ do {
+ status = NETDRV_R16 (IntrStatus);
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (status == 0xFFFF)
+ break;
+
+ handled = 1;
+ /* Acknowledge all of the current interrupt sources ASAP */
+ NETDRV_W16_F (IntrStatus, status);
+
+ DPRINTK ("%s: interrupt status=%#4.4x new intstat=%#4.4x.\n",
+ dev->name, status,
+ NETDRV_R16 (IntrStatus));
+
+ if ((status &
+ (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
+ RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
+ break;
+
+ /* Check uncommon events with one test. */
+ if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
+ RxFIFOOver | TxErr | RxErr))
+ netdrv_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */
+ netdrv_rx_interrupt (dev, tp, ioaddr);
+
+ if (status & (TxOK | TxErr))
+ netdrv_tx_interrupt (dev, tp, ioaddr);
+
+ boguscnt--;
+ } while (boguscnt > 0);
+
+ if (boguscnt <= 0) {
+ printk (KERN_WARNING
+ "%s: Too much work at interrupt, "
+ "IntrStatus=0x%4.4x.\n", dev->name,
+ status);
+
+ /* Clear all interrupt sources. */
+ NETDRV_W16 (IntrStatus, 0xffff);
+ }
+
+ spin_unlock (&tp->lock);
+
+ DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, NETDRV_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+
+static int netdrv_close (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ DPRINTK ("ENTER\n");
+
+ netif_stop_queue (dev);
+
+ DPRINTK ("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, NETDRV_R16 (IntrStatus));
+
+ del_timer_sync (&tp->timer);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ NETDRV_W16 (IntrMask, 0x0000);
+
+ /* Update the error counts. */
+ tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
+ NETDRV_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ synchronize_irq ();
+ free_irq (dev->irq, dev);
+
+ netdrv_tx_clear (tp);
+
+ pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8 (Config1, 0x03);
+ NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+
+ DPRINTK ("EXIT\n");
+ return 0;
+}
+
+
+static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct netdrv_private *tp = dev->priv;
+ struct mii_ioctl_data *data = if_mii(rq);
+ unsigned long flags;
+ int rc = 0;
+
+ DPRINTK ("ENTER\n");
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = tp->phys[0] & 0x3f;
+ /* Fall Through */
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ spin_lock_irqsave (&tp->lock, flags);
+ data->val_out = mdio_read (dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ break;
+
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable (CAP_NET_ADMIN)) {
+ rc = -EPERM;
+ break;
+ }
+
+ spin_lock_irqsave (&tp->lock, flags);
+ mdio_write (dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ break;
+
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ DPRINTK ("EXIT, returning %d\n", rc);
+ return rc;
+}
+
+
+static struct net_device_stats *netdrv_get_stats (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+
+ DPRINTK ("ENTER\n");
+
+ assert (tp != NULL);
+
+ if (netif_running(dev)) {
+ unsigned long flags;
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
+ NETDRV_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ DPRINTK ("EXIT\n");
+ return &tp->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void netdrv_set_rx_mode (struct net_device *dev)
+{
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int i, rx_mode;
+ u32 tmp;
+
+ DPRINTK ("ENTER\n");
+
+ DPRINTK ("%s: netdrv_set_rx_mode(%4.4x) done -- Rx config %8.8x.\n",
+ dev->name, dev->flags, NETDRV_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ printk (KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ }
+
+ /* if called from irq handler, lock already acquired */
+ if (!in_irq ())
+ spin_lock_irq (&tp->lock);
+
+ /* We can safely update without stopping the chip. */
+ tmp = netdrv_rx_config | rx_mode |
+ (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ NETDRV_W32_F (RxConfig, tmp);
+ NETDRV_W32_F (MAR0 + 0, mc_filter[0]);
+ NETDRV_W32_F (MAR0 + 4, mc_filter[1]);
+
+ if (!in_irq ())
+ spin_unlock_irq (&tp->lock);
+
+ DPRINTK ("EXIT\n");
+}
+
+
+#ifdef CONFIG_PM
+
+static int netdrv_suspend (struct pci_dev *pdev, u32 state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct netdrv_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (!netif_running(dev))
+ return 0;
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ NETDRV_W16 (IntrMask, 0x0000);
+ NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+
+ /* Update the error counts. */
+ tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
+ NETDRV_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_save_state (pdev);
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int netdrv_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct netdrv_private *tp = dev->priv;
+
+ if (!netif_running(dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ pci_restore_state (pdev);
+ netif_device_attach (dev);
+ netdrv_hw_start (dev);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver netdrv_pci_driver = {
+ .name = MODNAME,
+ .id_table = netdrv_pci_tbl,
+ .probe = netdrv_init_one,
+ .remove = __devexit_p(netdrv_remove_one),
+#ifdef CONFIG_PM
+ .suspend = netdrv_suspend,
+ .resume = netdrv_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init netdrv_init_module (void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init (&netdrv_pci_driver);
+}
+
+
+static void __exit netdrv_cleanup_module (void)
+{
+ pci_unregister_driver (&netdrv_pci_driver);
+}
+
+
+module_init(netdrv_init_module);
+module_exit(netdrv_cleanup_module);