mmc: sdhci: Introduce max_timeout_count variable in sdhci_host

Introduce max_timeout_count variable in the sdhci_host structure
and use in timeout calculation. By default its set to 0xE
(max timeout register value as per SDHC spec). But at the same time
vendors drivers can update it if they support different max timeout
register value than 0xE.

Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1628232901-30897-2-git-send-email-sartgarg@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

1 files changed, 9 insertions, 7 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aba6e10b8605..613e1ab6cac4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -934,21 +934,21 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
 
 	/*
 	 * If the host controller provides us with an incorrect timeout
-	 * value, just skip the check and use 0xE.  The hardware may take
+	 * value, just skip the check and use the maximum. The hardware may take
 	 * longer to time out, but that's much better than having a too-short
 	 * timeout value.
 	 */
 	if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
-		return 0xE;
+		return host->max_timeout_count;
 
 	/* Unspecified command, asume max */
 	if (cmd == NULL)
-		return 0xE;
+		return host->max_timeout_count;
 
 	data = cmd->data;
 	/* Unspecified timeout, assume max */
 	if (!data && !cmd->busy_timeout)
-		return 0xE;
+		return host->max_timeout_count;
 
 	/* timeout in us */
 	target_timeout = sdhci_target_timeout(host, cmd, data);
@@ -968,15 +968,15 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
 	while (current_timeout < target_timeout) {
 		count++;
 		current_timeout <<= 1;
-		if (count >= 0xF)
+		if (count > host->max_timeout_count)
 			break;
 	}
 
-	if (count >= 0xF) {
+	if (count > host->max_timeout_count) {
 		if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
 			DBG("Too large timeout 0x%x requested for CMD%d!\n",
 			    count, cmd->opcode);
-		count = 0xE;
+		count = host->max_timeout_count;
 	} else {
 		*too_big = false;
 	}
@@ -3940,6 +3940,8 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
 	 */
 	host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
 
+	host->max_timeout_count = 0xE;
+
 	return host;
 }