Merge v5.16-rc5 into drm-next

Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0a1 ("drm/vc4: fix error code in vc4_create_object()")

Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 25 insertions, 7 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 05187457f88a..41446f9cc52d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -191,6 +191,7 @@
 #define SMBSLVSTS_HST_NTFY_STS	BIT(0)
 
 /* Host Notify Command register bits */
+#define SMBSLVCMD_SMBALERT_DISABLE	BIT(2)
 #define SMBSLVCMD_HST_NTFY_INTREN	BIT(0)
 
 #define STATUS_ERROR_FLAGS	(SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
@@ -259,6 +260,7 @@ struct i801_priv {
 	struct i2c_adapter adapter;
 	unsigned long smba;
 	unsigned char original_hstcfg;
+	unsigned char original_hstcnt;
 	unsigned char original_slvcmd;
 	struct pci_dev *pci_dev;
 	unsigned int features;
@@ -641,12 +643,20 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
 		i801_isr_byte_done(priv);
 
 	/*
-	 * Clear irq sources and report transaction result.
+	 * Clear remaining IRQ sources: Completion of last command, errors
+	 * and the SMB_ALERT signal. SMB_ALERT status is set after signal
+	 * assertion independently of the interrupt generation being blocked
+	 * or not so clear it always when the status is set.
+	 */
+	status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS;
+	if (status)
+		outb_p(status, SMBHSTSTS(priv));
+	status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */
+	/*
+	 * Report transaction result.
 	 * ->status must be cleared before the next transaction is started.
 	 */
-	status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
 	if (status) {
-		outb_p(status, SMBHSTSTS(priv));
 		priv->status = status;
 		complete(&priv->done);
 	}
@@ -974,9 +984,13 @@ static void i801_enable_host_notify(struct i2c_adapter *adapter)
 	if (!(priv->features & FEATURE_HOST_NOTIFY))
 		return;
 
-	if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd))
-		outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd,
-		       SMBSLVCMD(priv));
+	/*
+	 * Enable host notify interrupt and block the generation of interrupt
+	 * from the SMB_ALERT signal because the driver does not support
+	 * SMBus Alert.
+	 */
+	outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
+	       priv->original_slvcmd, SMBSLVCMD(priv));
 
 	/* clear Host Notify bit to allow a new notification */
 	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
@@ -1805,7 +1819,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		outb_p(inb_p(SMBAUXCTL(priv)) &
 		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
 
-	/* Remember original Host Notify setting */
+	/* Remember original Interrupt and Host Notify settings */
+	priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
 	if (priv->features & FEATURE_HOST_NOTIFY)
 		priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
 
@@ -1869,6 +1884,7 @@ static void i801_remove(struct pci_dev *dev)
 {
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
 	i801_del_mux(priv);
 	i2c_del_adapter(&priv->adapter);
@@ -1892,6 +1908,7 @@ static void i801_shutdown(struct pci_dev *dev)
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
 	/* Restore config registers to avoid hard hang on some systems */
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
 	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 }
@@ -1901,6 +1918,7 @@ static int i801_suspend(struct device *dev)
 {
 	struct i801_priv *priv = dev_get_drvdata(dev);
 
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
 	return 0;
 }