s390/pci: create links between PFs and VFs

On s390 PCI Virtual Functions (VFs) are scanned by firmware and are made
available to Linux via the hot-plug interface. As such the common code
path of doing the scan directly using the parent Physical Function (PF)
is not used and fenced off with the no_vf_scan attribute.

Even if the partition created the VFs itself e.g. using the sriov_numvfs
attribute of a PF, the PF/VF links thus need to be established after the
fact. To do this when a VF is plugged we scan through all functions on
the same zbus and test whether they are the parent PF in which case we
establish the necessary links.

With these links established there is now no more need to fence off
pci_iov_remove_virtfn() for pdev->no_vf_scan as the common code now
works fine.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506154139.90609-3-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

1 files changed, 70 insertions, 2 deletions

diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
index ada571d1c630..642a99384688 100644
--- a/arch/s390/pci/pci_bus.c
+++ b/arch/s390/pci/pci_bus.c
@@ -126,6 +126,64 @@ static struct zpci_bus *zpci_bus_alloc(int pchid)
 	return zbus;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int zpci_bus_link_virtfn(struct pci_dev *pdev,
+		struct pci_dev *virtfn, int vfid)
+{
+	int rc;
+
+	virtfn->physfn = pci_dev_get(pdev);
+	rc = pci_iov_sysfs_link(pdev, virtfn, vfid);
+	if (rc) {
+		pci_dev_put(pdev);
+		virtfn->physfn = NULL;
+		return rc;
+	}
+	return 0;
+}
+
+static int zpci_bus_setup_virtfn(struct zpci_bus *zbus,
+		struct pci_dev *virtfn, int vfn)
+{
+	int i, cand_devfn;
+	struct zpci_dev *zdev;
+	struct pci_dev *pdev;
+	int vfid = vfn - 1; /* Linux' vfid's start at 0 vfn at 1*/
+	int rc = 0;
+
+	virtfn->is_virtfn = 1;
+	virtfn->multifunction = 0;
+	WARN_ON(vfid < 0);
+	/* If the parent PF for the given VF is also configured in the
+	 * instance, it must be on the same zbus.
+	 * We can then identify the parent PF by checking what
+	 * devfn the VF would have if it belonged to that PF using the PF's
+	 * stride and offset. Only if this candidate devfn matches the
+	 * actual devfn will we link both functions.
+	 */
+	for (i = 0; i < ZPCI_FUNCTIONS_PER_BUS; i++) {
+		zdev = zbus->function[i];
+		if (zdev && zdev->is_physfn) {
+			pdev = pci_get_slot(zbus->bus, zdev->devfn);
+			cand_devfn = pci_iov_virtfn_devfn(pdev, vfid);
+			if (cand_devfn == virtfn->devfn) {
+				rc = zpci_bus_link_virtfn(pdev, virtfn, vfid);
+				break;
+			}
+		}
+	}
+	return rc;
+}
+#else
+static inline int zpci_bus_setup_virtfn(struct zpci_bus *zbus,
+		struct pci_dev *virtfn, int vfn)
+{
+	virtfn->is_virtfn = 1;
+	virtfn->multifunction = 0;
+	return 0;
+}
+#endif
+
 static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
 {
 	struct pci_bus *bus;
@@ -156,10 +214,20 @@ static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
 	}
 
 	pdev = pci_scan_single_device(bus, zdev->devfn);
-	if (pdev)
+	if (pdev) {
+		if (!zdev->is_physfn) {
+			rc = zpci_bus_setup_virtfn(zbus, pdev, zdev->vfn);
+			if (rc)
+				goto failed_with_pdev;
+		}
 		pci_bus_add_device(pdev);
-
+	}
 	return 0;
+
+failed_with_pdev:
+	pci_stop_and_remove_bus_device(pdev);
+	pci_dev_put(pdev);
+	return rc;
 }
 
 static void zpci_bus_add_devices(struct zpci_bus *zbus)