powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 82 deletions

diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
deleted file mode 100644
index 26f604e05cfa..000000000000
--- a/arch/ppc/platforms/prpmc800.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc800.h
- *
- * Definitions for Motorola PrPMC800 board support
- *
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- /*
-  * From Processor to PCI:
-  *   PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
-  *   PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
-  *      Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
-  *
-  * From PCI to Processor:
-  *   System Memory: 0x00000000 -> 0x00000000
-  */
-
-#ifndef __ASMPPC_PRPMC800_H
-#define __ASMPPC_PRPMC800_H
-
-#define PRPMC800_PCI_CONFIG_ADDR		0xfe000cf8
-#define PRPMC800_PCI_CONFIG_DATA		0xfe000cfc
-
-#define PRPMC800_PROC_PCI_IO_START		0xfe400000U
-#define PRPMC800_PROC_PCI_IO_END		0xfeefffffU
-#define PRPMC800_PCI_IO_START			0x00000000U
-#define PRPMC800_PCI_IO_END			0x00afffffU
-
-#define PRPMC800_PROC_PCI_MEM_START		0x80000000U
-#define PRPMC800_PROC_PCI_MEM_END		0x9fffffffU
-#define PRPMC800_PCI_MEM_START			0x80000000U
-#define PRPMC800_PCI_MEM_END			0x9fffffffU
-
-#define PRPMC800_NM_PROC_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PROC_PCI_MEM_END		0xdfffffffU
-#define PRPMC800_NM_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PCI_MEM_END			0xdfffffffU
-
-#define PRPMC800_PCI_DRAM_OFFSET		0x00000000U
-#define PRPMC800_PCI_PHY_MEM_OFFSET		0x00000000U
-
-#define PRPMC800_ISA_IO_BASE			PRPMC800_PROC_PCI_IO_START
-#define PRPMC800_ISA_MEM_BASE			0x00000000U
-
-#define PRPMC800_HARRIER_XCSR_BASE		HARRIER_DEFAULT_XCSR_BASE
-#define PRPMC800_HARRIER_MPIC_BASE		0xff000000
-
-#define PRPMC800_SERIAL_1			0xfeff00c0
-
-#define PRPMC800_BASE_BAUD			1843200
-
-/*
- * interrupt vector number and priority for harrier internal interrupt
- * sources
- */
-#define PRPMC800_INT_IRQ			16
-#define PRPMC800_INT_PRI			15
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* UARTS are at IRQ 16 */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
-		iomem_base: (unsigned char *)PRPMC800_SERIAL_1,		\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif				/* __ASMPPC_PRPMC800_H */