diff options
| author | Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> | 2023-09-05 10:24:04 +0900 |
|---|---|---|
| committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2023-09-11 13:41:25 +0200 |
| commit | c588e1c9846b32182fd5a0ceb637b983810e7100 (patch) | |
| tree | 8ee37c4c2c8adaad5f94acf01147b524f407c495 /arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi | |
| parent | 183a709d3719e5c9919a6f12c86c0a3e088b712d (diff) | |
arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0
Enable PCIe Host controller channel 0 on R-Car S4-8 Spider board.
Since this board has an Oculink connector, CLKREQ# pin of PFC for PCIe
should not be used. So, using a GPIO is used to output the clock instead.
Otherwise the controller cannot detect a PCIe device.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230905012404.2915246-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 5cbde8e8fcd5..477f3114d2fd 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -53,6 +53,12 @@ reg = <0x4 0x80000000 0x0 0x80000000>; }; + rc21012_pci: clk-rc21012-pci { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + rc21012_ufs: clk-rc21012-ufs { compatible = "fixed-clock"; clock-frequency = <38400000>; @@ -106,6 +112,12 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + + rc21012-gpio2-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-high; + }; }; }; @@ -145,6 +157,18 @@ status = "okay"; }; +&pcie0_clkref { + compatible = "gpio-gate-clock"; + clocks = <&rc21012_pci>; + enable-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; + +&pciec0 { + reset-gpio = <&gpio_exp_20 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; |