diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-05-22 12:26:46 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-05-22 12:26:46 -0700 |
| commit | 5f16eb0549ab502906fb2a10147dad4b9dc185c4 (patch) | |
| tree | 285bcf9df768d58f9aa5dbda8418f1ec961bd22b /Documentation | |
| parent | d90be6e4aaf23cd4a2c202891399cbafe669aaab (diff) | |
| parent | f5b335dc025cfee90957efa90dc72fada0d5abb4 (diff) | |
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Diffstat (limited to 'Documentation')
37 files changed, 1196 insertions, 132 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi index 1a47f9e0cc84..8b9698fa0beb 100644 --- a/Documentation/ABI/stable/sysfs-bus-mhi +++ b/Documentation/ABI/stable/sysfs-bus-mhi @@ -29,3 +29,16 @@ Description: Initiates a SoC reset on the MHI controller. A SoC reset is This can be useful as a method of recovery if the device is non-responsive, or as a means of loading new firmware as a system administration task. + +What: /sys/bus/mhi/devices/.../trigger_edl +Date: April 2024 +KernelVersion: 6.10 +Contact: mhi@lists.linux.dev +Description: Writing a non-zero value to this file will force devices to + enter EDL (Emergency Download) mode. This entry only exists for + devices capable of entering the EDL mode using the standard EDL + triggering mechanism defined in the MHI spec v1.2. Once in EDL + mode, the flash programmer image can be downloaded to the + device to enter the flash programmer execution environment. + This can be useful if user wants to use QDL (Qualcomm Download, + which is used to download firmware over EDL) to update firmware. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index 3acf7fc31659..271b57c571aa 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -22,7 +22,7 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Used in conjunction with @addr_idx. Specifies characteristics about the address comparator being configure, for example the access type, the kind of instruction to trace, - processor contect ID to trigger on, etc. Individual fields in + processor context ID to trigger on, etc. Individual fields in the access type register may vary on the version of the trace entity. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc index 96aafa66b4a5..339cec3b2f1a 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc @@ -97,7 +97,7 @@ Date: August 2023 KernelVersion: 6.7 Contact: Anshuman Khandual <anshuman.khandual@arm.com> Description: (Read) Shows all supported Coresight TMC-ETR buffer modes available - for the users to configure explicitly. This file is avaialble only + for the users to configure explicitly. This file is available only for TMC ETR devices. What: /sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index b4d0fc8d319d..bf710ea6e0ef 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -244,7 +244,7 @@ KernelVersion 6.9 Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> Description: (RW) Read or write the status of timestamp upon all interface. - Only value 0 and 1 can be written to this node. Set this node to 1 to requeset + Only value 0 and 1 can be written to this node. Set this node to 1 to request timestamp to all trace packet. Accepts only one of the 2 values - 0 or 1. 0 : Disable the timestamp of all trace packets. diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt index d7e206b4901c..1119766564d7 100644 --- a/Documentation/ABI/testing/sysfs-devices-hisi_ptt +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt @@ -1,4 +1,4 @@ -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> @@ -8,7 +8,7 @@ Description: This directory contains files for tuning the PCIe link See Documentation/trace/hisi-ptt.rst for more information. -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> @@ -18,7 +18,7 @@ Description: (RW) Controls the weight of Tx completion TLPs, which influence will return an error, and out of range values will be converted to 2. The value indicates a probable level of the event. -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> @@ -28,7 +28,7 @@ Description: (RW) Controls the weight of Tx non-posted TLPs, which influence will return an error, and out of range values will be converted to 2. The value indicates a probable level of the event. -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> @@ -38,7 +38,7 @@ Description: (RW) Controls the weight of Tx posted TLPs, which influence the will return an error, and out of range values will be converted to 2. The value indicates a probable level of the event. -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> @@ -49,7 +49,7 @@ Description: (RW) Control the allocated buffer watermark for inbound packets. will return an error, and out of range values will be converted to 2. The value indicates a probable level of the event. -What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level +What: /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level Date: October 2022 KernelVersion: 6.1 Contact: Yicong Yang <yangyicong@hisilicon.com> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 2e6d5ebfd3c7..7cee78ad4108 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -243,7 +243,8 @@ Description: less measurements. Units after application of scale and offset are milli degrees Celsius. -What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_input +What: /sys/bus/iio/devices/iio:deviceX/in_temp_input KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ad9739a b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a new file mode 100644 index 000000000000..ed59299e6f8d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a @@ -0,0 +1,19 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode +KernelVersion: 6.9 +Contact: linux-iio@vger.kernel.org +Description: + DAC operating mode. One of the following modes can be selected: + + * normal: This is DAC normal mode. + * mixed-mode: In this mode the output is effectively chopped at + the DAC sample rate. This has the effect of + reducing the power of the fundamental signal while + increasing the power of the images centered around + the DAC sample rate, thus improving the output + power of these images. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode_available +KernelVersion: 6.9 +Contact: linux-iio@vger.kernel.org +Description: + Available operating modes. diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index ea3c5db6b52d..76163abed655 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -66,13 +66,11 @@ properties: - const: apb_pclk in-ports: - type: object description: | Input connections from TPDM to TPDA $ref: /schemas/graph.yaml#/properties/ports out-ports: - type: object description: | Output connections from the TPDA to legacy CoreSight trace bus. $ref: /schemas/graph.yaml#/properties/ports @@ -97,33 +95,31 @@ examples: # minimum tpda definition. - | tpda@6004000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x6004000 0x1000>; + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x6004000 0x1000>; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; - in-ports { - #address-cells = <1>; - #size-cells = <0>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; port@0 { reg = <0>; tpda_qdss_0_in_tpdm_dcc: endpoint { - remote-endpoint = - <&tpdm_dcc_out_tpda_qdss_0>; - }; + remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>; + }; }; }; - out-ports { - port { - tpda_qdss_out_funnel_in0: endpoint { - remote-endpoint = - <&funnel_in0_in_tpda_qdss>; - }; + out-ports { + port { + tpda_qdss_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_tpda_qdss>; }; - }; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml new file mode 100644 index 000000000000..05775746fd70 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SelectMAP FPGA interface + +maintainers: + - Charles Perry <charles.perry@savoirfairelinux.com> + +description: | + Xilinx 7 Series FPGAs support a method of loading the bitstream over a + parallel port named the SelectMAP interface in the documentation. Only + the x8 mode is supported where data is loaded at one byte per rising edge of + the clock, with the MSB of each byte presented to the D0 pin. + + Datasheets: + https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf + +allOf: + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + +properties: + compatible: + enum: + - xlnx,fpga-xc7s-selectmap + - xlnx,fpga-xc7a-selectmap + - xlnx,fpga-xc7k-selectmap + - xlnx,fpga-xc7v-selectmap + + reg: + description: + At least 1 byte of memory mapped IO + maxItems: 1 + + prog-gpios: + description: + config pin (referred to as PROGRAM_B in the manual) + maxItems: 1 + + done-gpios: + description: + config status pin (referred to as DONE in the manual) + maxItems: 1 + + init-gpios: + description: + initialization status and configuration error pin + (referred to as INIT_B in the manual) + maxItems: 1 + + csi-gpios: + description: + chip select pin (referred to as CSI_B in the manual) + Optional gpio for if the bus controller does not provide a chip select. + maxItems: 1 + + rdwr-gpios: + description: + read/write select pin (referred to as RDWR_B in the manual) + Optional gpio for if the bus controller does not provide this pin. + maxItems: 1 + +required: + - compatible + - reg + - prog-gpios + - done-gpios + - init-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + fpga-mgr@8000000 { + compatible = "xlnx,fpga-xc7s-selectmap"; + reg = <0x8000000 0x4>; + prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 07cacc3f6a97..280ed479ef5a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,6 +32,8 @@ properties: spi-cpol: true + spi-3wire: true + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml new file mode 100644 index 000000000000..ea6cfcd0aff4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7173 ADC + +maintainers: + - Ceclan Dumitru <dumitru.ceclan@analog.com> + +description: | + Analog Devices AD717x ADC's: + The AD717x family offer a complete integrated Sigma-Delta ADC solution which + can be used in high precision, low noise single channel applications + (Life Science measurements) or higher speed multiplexed applications + (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended + primarily for measurement of signals close to DC but also delivers + outstanding performance with input bandwidths out to ~10kHz. + + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf + +properties: + compatible: + enum: + - adi,ad7172-2 + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-2 + - adi,ad7175-8 + - adi,ad7176-2 + - adi,ad7177-2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: | + Ready: multiplexed with SPI data out. While SPI CS is low, + can be used to indicate the completion of a conversion. + + - description: | + Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR, + and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. + Therefore, the ERROR pin indicates that an error has occurred. + + interrupt-names: + minItems: 1 + items: + - const: rdy + - const: err + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 20000000 + + gpio-controller: + description: Marks the device node as a GPIO controller. + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies + GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. + + vref-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref) specified here must be the voltage difference between the + REF+ and REF- pins: Vref = (REF+) - (REF-). + + vref2-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref2) specified here must be the voltage difference between the + REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-). + + avdd-supply: + description: Avdd supply, can be used as reference for conversion. + This supply is referenced to AVSS, voltage specified here + represents (AVDD1 - AVSS). + + avdd2-supply: + description: Avdd2 supply, used as the input to the internal voltage regulator. + This supply is referenced to AVSS, voltage specified here + represents (AVDD2 - AVSS). + + iovdd-supply: + description: iovdd supply, used for the chip digital interface. + + clocks: + maxItems: 1 + description: | + Optional external clock source. Can include one clock source: external + clock or external crystal. + + clock-names: + enum: + - ext-clk + - xtal + + '#clock-cells': + const: 0 + +patternProperties: + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + diff-channels: + items: + minimum: 0 + maximum: 31 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + vref : REF+ /REF− + vref2 : REF2+ /REF2− + refout-avss: REFOUT/AVSS (Internal reference) + avdd : AVDD /AVSS + + External reference ref2 only available on ad7173-8 and ad7172-4. + Internal reference refout-avss not available on ad7172-4. + + If not specified, internal reference used (if available). + $ref: /schemas/types.yaml#/definitions/string + enum: + - vref + - vref2 + - refout-avss + - avdd + default: refout-avss + + required: + - reg + - diff-channels + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + # Only ad7172-4, ad7173-8 and ad7175-8 support vref2 + # Other models have [0-3] channel registers + - if: + properties: + compatible: + not: + contains: + enum: + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-8 + then: + properties: + vref2-supply: false + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,reference-select: + enum: + - vref + - refout-avss + - avdd + reg: + maximum: 3 + + # Model ad7172-4 does not support internal reference + - if: + properties: + compatible: + contains: + const: adi,ad7172-4 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + reg: + maximum: 7 + adi,reference-select: + enum: + - vref + - vref2 + - avdd + required: + - adi,reference-select + + - if: + anyOf: + - required: [clock-names] + - required: [clocks] + then: + properties: + '#clock-cells': false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7173-8"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + vref-supply = <&dummy_regulator>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = "vref"; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + }; + + channel@2 { + reg = <2>; + bipolar; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + bipolar; + diff-channels = <6 7>; + }; + + channel@4 { + reg = <4>; + diff-channels = <8 9>; + adi,reference-select = "avdd"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml new file mode 100644 index 000000000000..d17d184842d3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices PulSAR LFCSP Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + A family of pin-compatible single channel differential analog to digital + converters with SPI support in a LFCSP package. + + * https://www.analog.com/en/products/ad7944.html + * https://www.analog.com/en/products/ad7985.html + * https://www.analog.com/en/products/ad7986.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7944 + - adi,ad7985 + - adi,ad7986 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 111111111 + + spi-cpol: true + spi-cpha: true + + adi,spi-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ single, chain ] + description: | + This property indicates the SPI wiring configuration. + + When this property is omitted, it is assumed that the device is using what + the datasheet calls "4-wire mode". This is the conventional SPI mode used + when there are multiple devices on the same bus. In this mode, the CNV + line is used to initiate the conversion and the SDI line is connected to + CS on the SPI controller. + + When this property is present, it indicates that the device is using one + of the following alternative wiring configurations: + + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's + definition of 3-wire mode is NOT at all related to the standard + spi-3wire property!) This mode is often used when the ADC is the only + device on the bus. In this mode, SDI is tied to VIO, and the CNV line + can be connected to the CS line of the SPI controller or to a GPIO, in + which case the CS line of the controller is unused. + * chain: The datasheet calls this "chain mode". This mode is used to save + on wiring when multiple ADCs are used. In this mode, the SDI line of + one chip is tied to the SDO of the next chip in the chain and the SDI of + the last chip in the chain is tied to GND. Only the first chip in the + chain is connected to the SPI bus. The CNV line of all chips are tied + together. The CS line of the SPI controller can be used as the CNV line + only if it is active high. + + '#daisy-chained-devices': true + + avdd-supply: + description: A 2.5V supply that powers the analog circuitry. + + dvdd-supply: + description: A 2.5V supply that powers the digital circuitry. + + vio-supply: + description: + A 1.8V to 2.7V supply for the digital inputs and outputs. + + bvdd-supply: + description: + A voltage supply for the buffered power. When using an external reference + without an internal buffer (PDREF high, REFIN low), this should be + connected to the same supply as ref-supply. Otherwise, when using an + internal reference or an external reference with an internal buffer, this + is connected to a 5V supply. + + ref-supply: + description: + Voltage regulator for the external reference voltage (REF). This property + is omitted when using an internal reference. + + refin-supply: + description: + Voltage regulator for the reference buffer input (REFIN). When using an + external buffer with internal reference, this should be connected to a + 1.2V external reference voltage supply. Otherwise, this property is + omitted. + + cnv-gpios: + description: + The Convert Input (CNV). This input has multiple functions. It initiates + the conversions and selects the SPI mode of the device (chain or CS). In + 'single' mode, this property is omitted if the CNV pin is connected to the + CS line of the SPI controller. + maxItems: 1 + + turbo-gpios: + description: + GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO + line is hard-wired and the state is determined by the adi,always-turbo + property. + maxItems: 1 + + adi,always-turbo: + type: boolean + description: + When present, this property indicates that the TURBO line is hard-wired + and the state is always high. If neither this property nor turbo-gpios is + present, the TURBO line is assumed to be hard-wired and the state is + always low. + + interrupts: + description: + The SDO pin can also function as a busy indicator. This node should be + connected to an interrupt that is triggered when the SDO line goes low + while the SDI line is high and the CNV line is low ('single' mode) or the + SDI line is low and the CNV line is high ('multi' mode); or when the SDO + line goes high while the SDI and CNV lines are high (chain mode), + maxItems: 1 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - vio-supply + - bvdd-supply + +allOf: + # ref-supply and refin-supply are mutually exclusive (neither is also valid) + - if: + required: + - ref-supply + then: + properties: + refin-supply: false + - if: + required: + - refin-supply + then: + properties: + ref-supply: false + # in '4-wire' mode, cnv-gpios is required, for other modes it is optional + - if: + not: + required: + - adi,spi-mode + then: + required: + - cnv-gpios + # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled + - if: + required: + - adi,spi-mode + properties: + adi,spi-mode: + const: chain + then: + properties: + spi-max-frequency: + maximum: 90909090 + adi,always-turbo: false + required: + - '#daisy-chained-devices' + else: + properties: + '#daisy-chained-devices': false + # turbo-gpios and adi,always-turbo are mutually exclusive + - if: + required: + - turbo-gpios + then: + properties: + adi,always-turbo: false + - if: + required: + - adi,always-turbo + then: + properties: + turbo-gpios: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "adi,ad7944"; + reg = <0>; + spi-cpha; + spi-max-frequency = <111111111>; + avdd-supply = <&supply_2_5V>; + dvdd-supply = <&supply_2_5V>; + vio-supply = <&supply_1_8V>; + bvdd-supply = <&supply_5V>; + cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 3d49d21ad33d..e1f450b80db2 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -28,6 +28,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1 @@ -48,6 +51,7 @@ required: - compatible - dmas - reg + - clocks additionalProperties: false @@ -58,6 +62,7 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; + clocks = <&axi_clk>; #io-backend-cells = <0>; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml index 7ef46c90ebc8..da605a051b94 100644 --- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -11,8 +11,13 @@ maintainers: properties: compatible: - enum: - - allwinner,sun20i-d1-gpadc + oneOf: + - enum: + - allwinner,sun20i-d1-gpadc + - items: + - enum: + - allwinner,sun50i-h616-gpadc + - const: allwinner,sun20i-d1-gpadc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml new file mode 100644 index 000000000000..c0b36476113a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD9739A RF DAC + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + - Nuno Sa <nuno.sa@analog.com> + +description: | + The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable + of synthesizing wideband signals from dc up to 3 GHz. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf + +properties: + compatible: + enum: + - adi,ad9739a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-3p3-supply: + description: 3.3V Digital input supply. + + vdd-supply: + description: 1.8V Digital input supply. + + vdda-supply: + description: 3.3V Analog input supply. + + vddc-supply: + description: 1.8V Clock input supply. + + vref-supply: + description: Input/Output reference supply. + + io-backends: + maxItems: 1 + + adi,full-scale-microamp: + description: This property represents the DAC full scale current. + minimum: 8580 + maximum: 31700 + default: 20000 + +required: + - compatible + - reg + - clocks + - io-backends + - vdd-3p3-supply + - vdd-supply + - vdda-supply + - vddc-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad9739a"; + reg = <0>; + + clocks = <&dac_clk>; + + io-backends = <&iio_backend>; + + vdd-3p3-supply = <&vdd_3_3>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd_3_3>; + vddc-supply = <&vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml new file mode 100644 index 000000000000..a55e9bfc66d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI DAC IP core + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +description: | + Analog Devices Generic AXI DAC IP core for interfacing a DAC device + with a high speed serial (JESD204B/C) or source synchronous parallel + interface (LVDS/CMOS). + Usually, some other interface type (i.e SPI) is used as a control + interface for the actual DAC, while this IP core will interface + to the data-lines of the DAC and handle the streaming of data from + memory via DMA into the DAC. + + https://wiki.analog.com/resources/fpga/docs/axi_dac_ip + +properties: + compatible: + enum: + - adi,axi-dac-9.1.b + + reg: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: tx + + clocks: + maxItems: 1 + + '#io-backend-cells': + const: 0 + +required: + - compatible + - dmas + - reg + - clocks + +additionalProperties: false + +examples: + - | + dac@44a00000 { + compatible = "adi,axi-dac-9.1.b"; + reg = <0x44a00000 0x10000>; + dmas = <&tx_dma 0>; + dma-names = "tx"; + #io-backend-cells = <0>; + clocks = <&axi_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml index 79da0323c327..e59db861e2eb 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml @@ -21,6 +21,7 @@ properties: - ti,dac5573 - ti,dac6573 - ti,dac7573 + - ti,dac081c081 - ti,dac121c081 reg: diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index eed0df9d3a23..205d352ab467 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -4,16 +4,20 @@ $id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor +title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> properties: compatible: - enum: - - maxim,max30102 - - maxim,max30105 + oneOf: + - enum: + - maxim,max30102 + - maxim,max30105 + - items: + - const: maxim,max30101 + - const: maxim,max30105 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 8b5dedd1a598..b375d307513f 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -34,6 +34,9 @@ properties: reg: maxItems: 1 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -43,6 +46,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; @@ -54,5 +58,6 @@ examples: vdd-supply = <&vcc_3v3>; interrupt-parent = <&gpio3>; interrupts = <23 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 7cd05bcbee31..3769f8e8e98c 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -32,6 +32,8 @@ properties: - invensense,icm42605 - invensense,icm42622 - invensense,icm42631 + - invensense,icm42686 + - invensense,icm42688 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 297b8a1a7ffb..587ff2bced2d 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -62,14 +62,15 @@ properties: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: - not: - properties: - compatible: - contains: - enum: - - invensense,mpu9150 - - invensense,mpu9250 - - invensense,mpu9255 + properties: + compatible: + contains: + enum: + - invensense,iam20680 + - invensense,icm20602 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 then: properties: i2c-gate: false diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml index 206af44f2c43..b750096530bc 100644 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml +++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml @@ -4,17 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Avago APDS9300 ambient light sensor +title: Avago Gesture/RGB/ALS/Proximity sensors maintainers: - - Jonathan Cameron <jic23@kernel.org> + - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com> description: | - Datasheet at https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-4191EN + Datasheet: https://www.avagotech.com/docs/AV02-4755EN properties: compatible: - const: avago,apds9300 + enum: + - avago,apds9300 + - avago,apds9306 + - avago,apds9960 reg: maxItems: 1 @@ -22,6 +27,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + additionalProperties: false required: @@ -30,6 +37,8 @@ required: examples: - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { #address-cells = <1>; #size-cells = <0>; @@ -38,7 +47,8 @@ examples: compatible = "avago,apds9300"; reg = <0x39>; interrupt-parent = <&gpio2>; - interrupts = <29 8>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®ulator_3v3>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml deleted file mode 100644 index f06e0fda5629..000000000000 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Avago APDS9960 gesture/RGB/ALS/proximity sensor - -maintainers: - - Matt Ranostay <matt.ranostay@konsulko.com> - -description: | - Datasheet at https://www.avagotech.com/docs/AV02-4191EN - -properties: - compatible: - const: avago,apds9960 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - -additionalProperties: false - -required: - - compatible - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@39 { - compatible = "avago,apds9960"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <16 1>; - }; - }; -... diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index dbb85135fd66..312febeeb3bb 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -57,6 +57,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + adi,mux-delay-config-us: description: | Extra delay prior to each conversion, in addition to the internal 1ms @@ -460,6 +462,7 @@ required: - compatible - reg - interrupts + - vdd-supply additionalProperties: false @@ -489,6 +492,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + vdd-supply = <&supply>; interrupts = <20 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8c8f05d9eaf1..80845c722ae4 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -34,6 +34,7 @@ properties: - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom + - qcom,sc8280xp-qfprom - qcom,sdm630-qfprom - qcom,sdm670-qfprom - qcom,sdm845-qfprom @@ -42,6 +43,9 @@ properties: - qcom,sm6375-qfprom - qcom,sm8150-qfprom - qcom,sm8250-qfprom + - qcom,sm8450-qfprom + - qcom,sm8550-qfprom + - qcom,sm8650-qfprom - const: qcom,qfprom reg: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index 068bedf5dbc9..5d7be0b34536 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SPMI SDAM maintainers: - - Shyam Kumar Thella <sthella@codeaurora.org> + - David Collins <quic_collinsd@quicinc.com> description: | The SDAM provides scratch register space for the PMIC clients. This diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml index f882903769f9..3ccf35de3719 100644 --- a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -14,7 +14,7 @@ description: | It is a MIPI System Power Management (SPMI) controller. The PMIC part is provided by - ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. allOf: - $ref: spmi.yaml# @@ -48,26 +48,23 @@ patternProperties: PMIC properties, which are specific to the used SPMI PMIC device(s). When used in combination with HiSilicon 6421v600, the properties are documented at - drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml unevaluatedProperties: false examples: - | - bus { - #address-cells = <2>; - #size-cells = <2>; + #include <dt-bindings/spmi/spmi.h> - spmi: spmi@fff24000 { + spmi@fff24000 { compatible = "hisilicon,kirin970-spmi-controller"; + reg = <0xfff24000 0x1000>; #address-cells = <2>; #size-cells = <0>; - reg = <0x0 0xfff24000 0x0 0x1000>; hisilicon,spmi-channel = <2>; pmic@0 { - reg = <0 0>; - /* pmic properties */ + reg = <0 SPMI_USID>; + /* pmic properties */ }; - }; }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml index f983b4af6db9..51daf1b847a9 100644 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -92,6 +92,7 @@ properties: description: > SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond. Supported values, 0 = primary bus, 1 = secondary bus + deprecated: true required: - compatible diff --git a/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml new file mode 100644 index 000000000000..a28b70fb330a --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7) + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control up to 2 SPMI separate buses. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +properties: + compatible: + const: qcom,x1e80100-spmi-pmic-arb + + reg: + items: + - description: core registers + - description: tx-channel per virtual slave registers + - description: rx-channel (called observer) per virtual slave registers + + reg-names: + items: + - const: core + - const: chnls + - const: obsrvr + + ranges: true + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +patternProperties: + "^spmi@[a-f0-9]+$": + type: object + $ref: /schemas/spmi/spmi.yaml + unevaluatedProperties: false + + properties: + reg: + items: + - description: configuration registers + - description: interrupt controller registers + + reg-names: + items: + - const: cnfg + - const: intr + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spmi: arbiter@c400000 { + compatible = "qcom,x1e80100-spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spmi_bus0: spmi@c42d000 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst index 604208534095..833f68fb0700 100644 --- a/Documentation/driver-api/fpga/fpga-bridge.rst +++ b/Documentation/driver-api/fpga/fpga-bridge.rst @@ -6,9 +6,12 @@ API to implement a new FPGA bridge * struct fpga_bridge - The FPGA Bridge structure * struct fpga_bridge_ops - Low level Bridge driver ops -* fpga_bridge_register() - Create and register a bridge +* __fpga_bridge_register() - Create and register a bridge * fpga_bridge_unregister() - Unregister a bridge +The helper macro ``fpga_bridge_register()`` automatically sets +the module that registers the FPGA bridge as the owner. + .. kernel-doc:: include/linux/fpga/fpga-bridge.h :functions: fpga_bridge @@ -16,7 +19,7 @@ API to implement a new FPGA bridge :functions: fpga_bridge_ops .. kernel-doc:: drivers/fpga/fpga-bridge.c - :functions: fpga_bridge_register + :functions: __fpga_bridge_register .. kernel-doc:: drivers/fpga/fpga-bridge.c :functions: fpga_bridge_unregister diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst index 49c0a9512653..8d2b79f696c1 100644 --- a/Documentation/driver-api/fpga/fpga-mgr.rst +++ b/Documentation/driver-api/fpga/fpga-mgr.rst @@ -24,7 +24,8 @@ How to support a new FPGA device -------------------------------- To add another FPGA manager, write a driver that implements a set of ops. The -probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as:: +probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``, +such as:: static const struct fpga_manager_ops socfpga_fpga_ops = { .write_init = socfpga_fpga_ops_configure_init, @@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as:: } Alternatively, the probe function could call one of the resource managed -register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full(). -When these functions are used, the parameter syntax is the same, but the call -to fpga_mgr_unregister() should be removed. In the above example, the -socfpga_fpga_remove() function would not be required. +register functions, ``devm_fpga_mgr_register()`` or +``devm_fpga_mgr_register_full()``. When these functions are used, the +parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be +removed. In the above example, the ``socfpga_fpga_remove()`` function would not be +required. The ops will implement whatever device specific register writes are needed to do the programming sequence for this particular FPGA. These ops return 0 for @@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver * struct fpga_manager - the FPGA manager struct * struct fpga_manager_ops - Low level FPGA manager driver ops * struct fpga_manager_info - Parameter structure for fpga_mgr_register_full() -* fpga_mgr_register_full() - Create and register an FPGA manager using the +* __fpga_mgr_register_full() - Create and register an FPGA manager using the fpga_mgr_info structure to provide the full flexibility of options -* fpga_mgr_register() - Create and register an FPGA manager using standard +* __fpga_mgr_register() - Create and register an FPGA manager using standard arguments -* devm_fpga_mgr_register_full() - Resource managed version of - fpga_mgr_register_full() -* devm_fpga_mgr_register() - Resource managed version of fpga_mgr_register() +* __devm_fpga_mgr_register_full() - Resource managed version of + __fpga_mgr_register_full() +* __devm_fpga_mgr_register() - Resource managed version of __fpga_mgr_register() * fpga_mgr_unregister() - Unregister an FPGA manager +Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``, +``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available +to ease the registration. + .. kernel-doc:: include/linux/fpga/fpga-mgr.h :functions: fpga_mgr_states @@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver :functions: fpga_manager_info .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: fpga_mgr_register_full + :functions: __fpga_mgr_register_full .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: fpga_mgr_register + :functions: __fpga_mgr_register .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: devm_fpga_mgr_register_full + :functions: __devm_fpga_mgr_register_full .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: devm_fpga_mgr_register + :functions: __devm_fpga_mgr_register .. kernel-doc:: drivers/fpga/fpga-mgr.c :functions: fpga_mgr_unregister diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst index dc55d60a0b4a..2d03b5fb7657 100644 --- a/Documentation/driver-api/fpga/fpga-region.rst +++ b/Documentation/driver-api/fpga/fpga-region.rst @@ -46,13 +46,16 @@ API to add a new FPGA region ---------------------------- * struct fpga_region - The FPGA region struct -* struct fpga_region_info - Parameter structure for fpga_region_register_full() -* fpga_region_register_full() - Create and register an FPGA region using the +* struct fpga_region_info - Parameter structure for __fpga_region_register_full() +* __fpga_region_register_full() - Create and register an FPGA region using the fpga_region_info structure to provide the full flexibility of options -* fpga_region_register() - Create and register an FPGA region using standard +* __fpga_region_register() - Create and register an FPGA region using standard arguments * fpga_region_unregister() - Unregister an FPGA region +Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()`` +automatically set the module that registers the FPGA region as the owner. + The FPGA region's probe function will need to get a reference to the FPGA Manager it will be using to do the programming. This usually would happen during the region's probe function. @@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list. :functions: fpga_region_info .. kernel-doc:: drivers/fpga/fpga-region.c - :functions: fpga_region_register_full + :functions: __fpga_region_register_full .. kernel-doc:: drivers/fpga/fpga-region.c - :functions: fpga_region_register + :functions: __fpga_region_register .. kernel-doc:: drivers/fpga/fpga-region.c :functions: fpga_region_unregister diff --git a/Documentation/iio/ad7944.rst b/Documentation/iio/ad7944.rst new file mode 100644 index 000000000000..0d26e56aba88 --- /dev/null +++ b/Documentation/iio/ad7944.rst @@ -0,0 +1,156 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +============= +AD7944 driver +============= + +ADC driver for Analog Devices Inc. AD7944 and similar devices. The module name +is ``ad7944``. + + +Supported devices +================= + +The following chips are supported by this driver: + +* `AD7944 <https://www.analog.com/AD7944>`_ +* `AD7985 <https://www.analog.com/AD7985>`_ +* `AD7986 <https://www.analog.com/AD7986>`_ + + +Supported features +================== + +SPI wiring modes +---------------- + +The driver currently supports three of the many possible SPI wiring configurations. + +CS mode, 3-wire, without busy indicator +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +-------------+ + +--------------------| CS | + v | | + VIO +--------------------+ | HOST | + | | CNV | | | + +--->| SDI AD7944 SDO |-------->| SDI | + | SCK | | | + +--------------------+ | | + ^ | | + +--------------------| SCLK | + +-------------+ + +To select this mode in the device tree, set the ``adi,spi-mode`` property to +``"single"`` and omit the ``cnv-gpios`` property. + +CS mode, 4-wire, without busy indicator +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +-------------+ + +-----------------------------------| CS | + | | | + | +--------------------| GPIO | + | v | | + | +--------------------+ | HOST | + | | CNV | | | + +--->| SDI AD7944 SDO |-------->| SDI | + | SCK | | | + +--------------------+ | | + ^ | | + +--------------------| SCLK | + +-------------+ + +To select this mode in the device tree, omit the ``adi,spi-mode`` property and +provide the ``cnv-gpios`` property. + +Chain mode, without busy indicator +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +-------------+ + +-------------------------+--------------------| CS | + v v | | + +--------------------+ +--------------------+ | HOST | + | CNV | | CNV | | | + +--->| SDI AD7944 SDO |--->| SDI AD7944 SDO |-------->| SDI | + | | SCK | | SCK | | | + GND +--------------------+ +--------------------+ | | + ^ ^ | | + +-------------------------+--------------------| SCLK | + +-------------+ + +To select this mode in the device tree, set the ``adi,spi-mode`` property to +``"chain"``, add the ``spi-cs-high`` flag, add the ``#daisy-chained-devices`` +property, and omit the ``cnv-gpios`` property. + +Reference voltage +----------------- + +All 3 possible reference voltage sources are supported: + +- Internal reference +- External 1.2V reference and internal buffer +- External reference + +The source is determined by the device tree. If ``ref-supply`` is present, then +the external reference is used. If ``refin-supply`` is present, then the internal +buffer is used. If neither is present, then the internal reference is used. + +Unimplemented features +---------------------- + +- ``BUSY`` indication +- ``TURBO`` mode + + +Device attributes +================= + +There are two types of ADCs in this family, pseudo-differential and fully +differential. The channel name is different depending on the type of ADC. + +Pseudo-differential ADCs +------------------------ + +AD7944 and AD7985 are pseudo-differential ADCs and have the following attributes: + ++---------------------------------------+--------------------------------------------------------------+ +| Attribute | Description | ++=======================================+==============================================================+ +| ``in_voltage0_raw`` | Raw ADC voltage value (*IN+* referenced to ground sense). | ++---------------------------------------+--------------------------------------------------------------+ +| ``in_voltage0_scale`` | Scale factor to convert raw value to mV. | ++---------------------------------------+--------------------------------------------------------------+ + +In "chain" mode, additional chips will appear as additional voltage input +channels, e.g. ``in_voltage1_raw``. + +Fully-differential ADCs +----------------------- + +AD7986 is a fully-differential ADC and has the following attributes: + ++---------------------------------------+--------------------------------------------------------------+ +| Attribute | Description | ++=======================================+==============================================================+ +| ``in_voltage0-voltage1_raw`` | Raw ADC voltage value (*IN+* - *IN-*). | ++---------------------------------------+--------------------------------------------------------------+ +| ``in_voltage0-voltage1_scale`` | Scale factor to convert raw value to mV. | ++---------------------------------------+--------------------------------------------------------------+ + +In "chain" mode, additional chips will appear as additional voltage input +channels, e.g. ``in_voltage2-voltage3_raw``. + + +Device buffers +============== + +This driver supports IIO triggered buffers. + +See :doc:`iio_devbuf` for more information. diff --git a/Documentation/iio/adis16475.rst b/Documentation/iio/adis16475.rst index 91cabb7d8d05..130f9e97cc17 100644 --- a/Documentation/iio/adis16475.rst +++ b/Documentation/iio/adis16475.rst @@ -66,11 +66,9 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. +-------------------------------------------+----------------------------------------------------------+ | in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | +-------------------------------------------+----------------------------------------------------------+ -| in_accel_calibbias_x | x-axis acceleration offset correction | -+-------------------------------------------+----------------------------------------------------------+ | in_accel_x_raw | Raw X-axis accelerometer channel value. | +-------------------------------------------+----------------------------------------------------------+ -| in_accel_calibbias_y | y-axis acceleration offset correction | +| in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. | +-------------------------------------------+----------------------------------------------------------+ | in_accel_y_raw | Raw Y-axis accelerometer channel value. | +-------------------------------------------+----------------------------------------------------------+ @@ -94,11 +92,9 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. +---------------------------------------+------------------------------------------------------+ | in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. | +---------------------------------------+------------------------------------------------------+ -| in_anglvel_calibbias_x | x-axis gyroscope offset correction | -+---------------------------------------+------------------------------------------------------+ | in_anglvel_x_raw | Raw X-axis gyroscope channel value. | +---------------------------------------+------------------------------------------------------+ -| in_anglvel_calibbias_y | y-axis gyroscope offset correction | +| in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. | +---------------------------------------+------------------------------------------------------+ | in_anglvel_y_raw | Raw Y-axis gyroscope channel value. | +---------------------------------------+------------------------------------------------------+ diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index 30b09eefe75e..fb6f9d743211 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -16,6 +16,7 @@ Industrial I/O Kernel Drivers .. toctree:: :maxdepth: 1 + ad7944 adis16475 bno055 ep93xx_adc diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst index 989255eb5622..6eef28ebb0c7 100644 --- a/Documentation/trace/hisi-ptt.rst +++ b/Documentation/trace/hisi-ptt.rst @@ -40,7 +40,7 @@ IO dies (SICL, Super I/O Cluster), where there's one PCIe Root Complex for each SICL. :: - /sys/devices/hisi_ptt<sicl_id>_<core_id> + /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id> Tune ==== @@ -53,7 +53,7 @@ Each event is presented as a file under $(PTT PMU dir)/tune, and a simple open/read/write/close cycle will be used to tune the event. :: - $ cd /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune + $ cd /sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune $ ls qos_tx_cpl qos_tx_np qos_tx_p tx_path_rx_req_alloc_buf_level diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index c472423412bf..a141e8e65c5d 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -174,6 +174,8 @@ Code Seq# Include File Comments 'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h 'N' 40-7F drivers/block/nvme.c +'N' 80-8F uapi/linux/ntsync.h NT synchronization primitives + <mailto:wine-devel@winehq.org> 'O' 00-06 mtd/ubi-user.h UBI 'P' all linux/soundcard.h conflict! 'P' 60-6F sound/sscape_ioctl.h conflict! |