diff options
| author | Takashi Iwai <tiwai@suse.de> | 2020-12-14 15:57:14 +0100 |
|---|---|---|
| committer | Takashi Iwai <tiwai@suse.de> | 2020-12-14 15:57:14 +0100 |
| commit | 598100be3053fef628adf3ad6ee4f828ad308f64 (patch) | |
| tree | 78069fd27e04f19fb14043ce16122ed1a6df1886 /Documentation | |
| parent | 175b8d89fe292796811fdee87fa39799a5b6b87a (diff) | |
| parent | 460aa020f56c974a3e7e5b5378b2355fec6a2c11 (diff) | |
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
Diffstat (limited to 'Documentation')
33 files changed, 2117 insertions, 1152 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index d61bc011e820..6f2398cdc82d 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -199,8 +199,6 @@ patternProperties: description: From common IIO binding. Used to pipe external sigma delta modulator or internal ADC output to DFSDM channel. - This is not required for "st,stm32-dfsdm-pdm" compatibility as - PDM microphone is binded in Audio DT node. required: - io-channels @@ -235,6 +233,10 @@ patternProperties: description: child node properties: + compatible: + enum: + - st,stm32h7-dfsdm-dai + "#sound-dai-cells": const: 0 @@ -244,6 +246,7 @@ patternProperties: modulator or internal ADC output to DFSDM channel. required: + - compatible - "#sound-dai-cells" - io-channels diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml new file mode 100644 index 000000000000..701449311fec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + + +title: Analog Devices ADAU1372 CODEC + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.om> + +description: | + Analog Devices ADAU1372 four inputs and two outputs codec. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf + +properties: + compatible: + enum: + - adi,adau1372 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: "mclk" + + powerdown-gpios: + description: GPIO used for hardware power-down. + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@3c { + compatible = "adi,adau1372"; + reg = <0x3c>; + #sound-dai-cells = <0>; + clock-names = "mclk"; + clocks = <&adau1372z_xtal>; + }; + }; + + adau1372z_xtal: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +... + diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt deleted file mode 100644 index 37f8aad01203..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt +++ /dev/null @@ -1,61 +0,0 @@ -Analog Devices ADAU1977/ADAU1978/ADAU1979 - -Datasheets: -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf - -This driver supports both the I2C and SPI bus. - -Required properties: - - compatible: Should contain one of the following: - "adi,adau1977" - "adi,adau1978" - "adi,adau1979" - - - AVDD-supply: analog power supply for the device, please consult - Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - reset-gpios: the reset pin for the chip, for more details consult - Documentation/devicetree/bindings/gpio/gpio.txt - - - DVDD-supply: supply voltage for the digital core, please consult - Documentation/devicetree/bindings/regulator/regulator.txt - -- adi,micbias: configures the voltage setting for the MICBIAS pin. - Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage - 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V - If not specified the default value will be "7" meaning 8.5 Volts. - This property is only valid for the ADAU1977 - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: The i2c address. Value depends on the state of ADDR0 - and ADDR1, as wired in hardware. - -Examples: - - adau1977_spi: adau1977@0 { - compatible = "adi,adau1977"; - spi-max-frequency = <600000>; - - AVDD-supply = <®ulator>; - DVDD-supply = <®ulator_digital>; - - adi,micbias = <3>; - reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - - adau1977_i2c: adau1977@11 { - compatible = "adi,adau1977"; - reg = <0x11>; - - AVDD-supply = <®ulator>; - DVDD-supply = <®ulator_digital>; - - reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml new file mode 100644 index 000000000000..b80454ad97da --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1977.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADAU1977/ADAU1978/ADAU1979 Quad ADC with Diagnostics + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Bogdan Togorean <bogdan.togorean@analog.com> + +description: | + Analog Devices ADAU1977 and similar quad ADC with Diagnostics + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf + +properties: + compatible: + enum: + - adi,adau1977 + - adi,adau1978 + - adi,adau1979 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + + AVDD-supply: + description: Analog power support for the device. + + DVDD-supply: + description: Supply voltage for digital core. + + adi,micbias: + description: | + Configures the voltage setting for the MICBIAS pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 7 + +required: + - reg + - compatible + - AVDD-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + adau1977_spi: adau1977@0 { + compatible = "adi,adau1977"; + reg = <0>; + spi-max-frequency = <600000>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + + adi,micbias = <3>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + adau1977_i2c: adau1977@11 { + compatible = "adi,adau1977"; + reg = <0x11>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 112ae00d63c1..a16e37b01e1d 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -24,6 +24,7 @@ properties: - items: - const: allwinner,sun50i-a64-i2s - const: allwinner,sun8i-h3-i2s + - const: allwinner,sun50i-h6-i2s reg: maxItems: 1 @@ -59,6 +60,7 @@ allOf: - allwinner,sun8i-a83t-i2s - allwinner,sun8i-h3-i2s - allwinner,sun50i-a64-codec-i2s + - allwinner,sun50i-h6-i2s then: required: @@ -68,7 +70,9 @@ allOf: properties: compatible: contains: - const: allwinner,sun8i-a83t-i2s + enum: + - allwinner,sun8i-a83t-i2s + - allwinner,sun8i-h3-i2s then: properties: diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt deleted file mode 100644 index d5f6919a2d69..000000000000 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ /dev/null @@ -1,337 +0,0 @@ -Audio Graph Card: - -Audio Graph Card specifies audio DAI connections of SoC <-> codec. -It is based on common bindings for device graphs. -see ${LINUX}/Documentation/devicetree/bindings/graph.txt - -Basically, Audio Graph Card property is same as Simple Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml - -Below are same as Simple-Card. - -- label -- widgets -- routing -- dai-format -- frame-master -- bitclock-master -- bitclock-inversion -- frame-inversion -- mclk-fs -- hp-det-gpio -- mic-det-gpio -- dai-tdm-slot-num -- dai-tdm-slot-width -- clocks / system-clock-frequency - -Required properties: - -- compatible : "audio-graph-card"; -- dais : list of CPU DAI port{s} - -Optional properties: -- pa-gpios: GPIO used to control external amplifier. - ------------------------ -Example: Single DAI case ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - dais = <&cpu_port>; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - - audio-codec { - ... - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - ------------------------ -Example: Multi DAI case ------------------------ - - sound-card { - compatible = "audio-graph-card"; - - label = "sound-card"; - - dais = <&cpu_port0 - &cpu_port1 - &cpu_port2>; - }; - - audio-codec@0 { - ... - port { - codec0_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint0>; - }; - }; - }; - - audio-codec@1 { - ... - port { - codec1_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - audio-codec@2 { - ... - port { - codec2_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint2>; - }; - }; - }; - - dai-controller { - ... - ports { - cpu_port0: port@0 { - cpu_endpoint0: endpoint { - remote-endpoint = <&codec0_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - cpu_port1: port@1 { - cpu_endpoint1: endpoint { - remote-endpoint = <&codec1_endpoint>; - - dai-format = "i2s"; - ... - }; - }; - cpu_port2: port@2 { - cpu_endpoint2: endpoint { - remote-endpoint = <&codec2_endpoint>; - - dai-format = "i2s"; - ... - }; - }; - }; - }; - - ------------------------ -Example: Sampling Rate Conversion ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - label = "sound-card"; - prefix = "codec"; - routing = "codec Playback", "DAI0 Playback", - "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - ------------------------ -Example: 2 CPU 1 Codec (Mixing) ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - label = "sound-card"; - routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", - "DAI0 Capture", "codec Capture"; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - - audio-graph-card,prefix = "codec"; - audio-graph-card,convert-rate = <48000>; - port { - reg = <0>; - codec_endpoint0: endpoint@0 { - remote-endpoint = <&cpu_endpoint0>; - }; - codec_endpoint1: endpoint@1 { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint0: endpoint@0 { - remote-endpoint = <&codec_endpoint0>; - - dai-format = "left_j"; - ... - }; - cpu_endpoint1: endpoint@1 { - remote-endpoint = <&codec_endpoint1>; - - dai-format = "left_j"; - ... - }; - }; - }; - ------------------------ -Example: Multi DAI with DPCM ------------------------ - - CPU0 ------ ak4613 - CPU1 ------ HDMI - CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */ - CPU3 --/ /* DPCM 3ch/4ch */ - CPU4 --/ /* DPCM 5ch/6ch */ - CPU5 --/ /* DPCM 7ch/8ch */ - CPU6 ------ PCM3168A-c - - sound_card: sound { - compatible = "audio-graph-card"; - - label = "sound-card"; - - routing = "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback", - "pcm3168a Playback", "DAI5 Playback"; - - dais = <&snd_port0 /* ak4613 */ - &snd_port1 /* HDMI0 */ - &snd_port2 /* pcm3168a playback */ - &snd_port3 /* pcm3168a capture */ - >; - }; - - ak4613: codec@10 { - ... - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_endpoint0>; - }; - }; - }; - - pcm3168a: audio-codec@44 { - ... - audio-graph-card,prefix = "pcm3168a"; - audio-graph-card,convert-channels = <8>; /* TDM Split */ - ports { - port@0 { - reg = <0>; - pcm3168a_endpoint_p1: endpoint@1 { - remote-endpoint = <&rsnd_endpoint2>; - ... - }; - pcm3168a_endpoint_p2: endpoint@2 { - remote-endpoint = <&rsnd_endpoint3>; - ... - }; - pcm3168a_endpoint_p3: endpoint@3 { - remote-endpoint = <&rsnd_endpoint4>; - ... - }; - pcm3168a_endpoint_p4: endpoint@4 { - remote-endpoint = <&rsnd_endpoint5>; - ... - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_endpoint6>; - ... - }; - }; - }; - }; - - &sound { - ports { - snd_port0: port@0 { - rsnd_endpoint0: endpoint { - remote-endpoint = <&ak4613_endpoint>; - ... - }; - }; - snd_port1: port@1 { - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - ... - }; - }; - snd_port2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - rsnd_endpoint2: endpoint@2 { - remote-endpoint = <&pcm3168a_endpoint_p1>; - ... - }; - rsnd_endpoint3: endpoint@3 { - remote-endpoint = <&pcm3168a_endpoint_p2>; - ... - }; - rsnd_endpoint4: endpoint@4 { - remote-endpoint = <&pcm3168a_endpoint_p3>; - ... - }; - rsnd_endpoint5: endpoint@5 { - remote-endpoint = <&pcm3168a_endpoint_p4>; - ... - }; - }; - snd_port3: port@6 { - rsnd_endpoint6: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; - ... - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml new file mode 100644 index 000000000000..109e55f9e597 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph Card Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +allOf: + - $ref: /schemas/sound/audio-graph.yaml# + +properties: + compatible: + enum: + - audio-graph-card + - audio-graph-scu-card + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "audio-graph-card"; + + dais = <&cpu_port_a>; + }; + + cpu { + /* + * dai-controller own settings + */ + + port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "left_j"; + }; + }; + }; + + codec { + /* + * codec own settings + */ + + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml new file mode 100644 index 000000000000..2005014161be --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-graph-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph Card 'port' Node Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +select: false + +properties: + port: + description: single OF-Graph subnode + type: object + properties: + reg: + maxItems: 1 + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 + patternProperties: + "^endpoint(@[0-9a-f]+)?": + type: object + properties: + remote-endpoint: + maxItems: 1 + mclk-fs: + description: | + Multiplication factor between stream rate and codec mclk. + When defined, mclk-fs property defined in dai-link sub nodes are + ignored. + $ref: /schemas/types.yaml#/definitions/uint32 + frame-inversion: + description: dai-link uses frame clock inversion + $ref: /schemas/types.yaml#/definitions/flag + bitclock-inversion: + description: dai-link uses bit clock inversion + $ref: /schemas/types.yaml#/definitions/flag + frame-master: + description: Indicates dai-link frame master. + $ref: /schemas/types.yaml#/definitions/phandle + bitclock-master: + description: Indicates dai-link bit clock master + $ref: /schemas/types.yaml#/definitions/phandle + dai-format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + - ac97 + - pdm + - msb + - lsb + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - remote-endpoint + + ports: + description: multi OF-Graph subnode + type: object + patternProperties: + "^port(@[0-9a-f]+)?": + $ref: "#/properties/port" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml new file mode 100644 index 000000000000..4b46794e5153 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-graph.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +properties: + dais: + $ref: /schemas/types.yaml#/definitions/phandle-array + label: + maxItems: 1 + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + routing: + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + widgets: + description: User specified audio sound widgets. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 + pa-gpios: + maxItems: 1 + hp-det-gpio: + maxItems: 1 + mic-det-gpio: + maxItems: 1 + +required: + - dais + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml new file mode 100644 index 000000000000..aa4be7170717 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + const: fsl,imx8mp-aud2htx + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral clock + + clock-names: + items: + - const: bus + + dmas: + items: + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: tx + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mp-clock.h> + + aud2htx: aud2htx@30cb0000 { + compatible = "fsl,imx8mp-aud2htx"; + reg = <0x30cb0000 0x10000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>; + clock-names = "bus"; + dmas = <&sdma2 26 2 0>; + dma-names = "tx"; + power-domains = <&audiomix_pd>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 2ac671f5cb9b..50449b6d1048 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -20,6 +20,7 @@ properties: - fsl,imx35-spdif - fsl,vf610-spdif - fsl,imx6sx-spdif + - fsl,imx8qm-spdif reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml new file mode 100644 index 000000000000..223b8ea693dc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio Transceiver (XCVR) Controller + +maintainers: + - Viorel Suman <viorel.suman@nxp.com> + +description: | + NXP XCVR (Audio Transceiver) is a on-chip functional module + that allows CPU to receive and transmit digital audio via + HDMI2.1 eARC, HDMI1.4 ARC and SPDIF. + +properties: + $nodename: + pattern: "^xcvr@.*" + + compatible: + enum: + - fsl,imx8mp-xcvr + + reg: + items: + - description: 20K RAM for code and data + - description: registers space + - description: RX FIFO address + - description: TX FIFO address + + reg-names: + items: + - const: ram + - const: regs + - const: rxfifo + - const: txfifo + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral clock + - description: PHY clock + - description: SPBA clock + - description: PLL clock + + clock-names: + items: + - const: ipg + - const: phy + - const: spba + - const: pll_ipg + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + resets: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/reset/imx8mp-reset.h> + + xcvr: xcvr@30cc0000 { + compatible = "fsl,imx8mp-xcvr"; + reg = <0x30cc0000 0x800>, + <0x30cc0800 0x400>, + <0x30cc0c00 0x080>, + <0x30cc0e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <0x0 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; + dma-names = "rx", "tx"; + resets = <&audiomix_reset 0>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index f339be62e7e4..90d9e9d81624 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -40,6 +40,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-tlv320aic32x4" + "fsl,imx-audio-si476x" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml new file mode 100644 index 000000000000..5095b780e2c7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,sc7180-trogdor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google SC7180-Trogdor ASoC sound card driver + +maintainers: + - Rohit kumar <rohitkr@codeaurora.org> + - Cheng-Yi Chiang <cychiang@chromium.org> + +description: + This binding describes the SC7180 sound card which uses LPASS for audio. + +properties: + compatible: + enum: + - google,sc7180-trogdor + - google,sc7180-coachz + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + dmic-gpios: + maxItems: 1 + description: GPIO for switching between DMICs + +patternProperties: + "^dai-link(@[0-9])?$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + reg: + description: dai link address. + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + properties: + sound-dai: true + + codec: + description: Holds subnode which indicates codec dai. + type: object + properties: + sound-dai: true + + required: + - link-name + - cpu + - codec + + additionalProperties: false + +required: + - compatible + - model + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + + - | + sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682-max98357a-2mic"; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dmic-gpios = <&tlmm 86 0>; + + dai-link@0 { + link-name = "MultiMedia0"; + reg = <0>; + cpu { + sound-dai = <&lpass_cpu 0>; + }; + + codec { + sound-dai = <&alc5682 0>; + }; + }; + + dai-link@1 { + link-name = "MultiMedia1"; + reg = <1>; + cpu { + sound-dai = <&lpass_cpu 1>; + }; + + codec { + sound-dai = <&max98357a>; + }; + }; + + dai-link@2 { + link-name = "MultiMedia2"; + reg = <2>; + cpu { + sound-dai = <&lpass_hdmi 0>; + }; + + codec { + sound-dai = <&msm_dp>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml new file mode 100644 index 000000000000..d5474f83ac2c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audio-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX audio complex with HDMI + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + enum: + - fsl,imx-audio-hdmi + - fsl,imx-audio-sii902x + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + audio-cpu: + description: The phandle of an CPU DAI controller + + hdmi-out: + description: | + This is a boolean property. If present, the transmitting function + of HDMI will be enabled, indicating there's a physical HDMI out + connector or jack on the board or it's connecting to some other IP + block, such as an HDMI encoder or display-controller. + + hdmi-in: + description: | + This is a boolean property. If present, the receiving function of + HDMI will be enabled, indicating there is a physical HDMI in + connector/jack on the board. + +required: + - compatible + - model + - audio-cpu + +additionalProperties: false + +examples: + - | + sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "audio-hdmi"; + audio-cpu = <&aud2htx>; + hdmi-out; + }; diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml index 6d20a24a2ae9..234f64a32184 100644 --- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml +++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml @@ -9,6 +9,9 @@ title: Marvel SSPA Digital Audio Interface Bindings maintainers: - Lubomir Rintel <lkundrak@v3.sk> +allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^audio-controller(@.*)?$" @@ -58,29 +61,9 @@ properties: type: object properties: - remote-endpoint: true - - frame-master: - type: boolean - description: SoC generates the frame clock - - bitclock-master: - type: boolean - description: SoC generates the bit clock - dai-format: - $ref: /schemas/types.yaml#/definitions/string - description: The digital audio format const: i2s - required: - - remote-endpoint - - required: - - endpoint - - additionalProperties: false - required: - "#sound-dai-cells" - compatible @@ -112,8 +95,6 @@ examples: port { endpoint { remote-endpoint = <&rt5631_0>; - frame-master; - bitclock-master; dai-format = "i2s"; }; }; diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml new file mode 100644 index 000000000000..bf8c8ba25009 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt8192-mt6359-rt1015-rt5682.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver + +maintainers: + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> + +description: + This binding describes the MT8192 sound card. + +properties: + compatible: + enum: + - mediatek,mt8192_mt6359_rt1015_rt5682 + - mediatek,mt8192_mt6359_rt1015p_rt5682 + + mediatek,platform: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of MT8192 ASoC platform. + +additionalProperties: false + +required: + - compatible + - mediatek,platform + +examples: + - | + + sound: mt8192-sound { + compatible = "mediatek,mt8192_mt6359_rt1015_rt5682"; + mediatek,platform = <&afe>; + pinctrl-names = "aud_clk_mosi_off", + "aud_clk_mosi_on"; + pinctrl-0 = <&aud_clk_mosi_off>; + pinctrl-1 = <&aud_clk_mosi_on>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt new file mode 100644 index 000000000000..6eaec46f384c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8315.txt @@ -0,0 +1,18 @@ +Nuvoton NAU8315 Mono Class-D Amplifier + +Required properties: +- compatible : "nuvoton,nau8315" + +Optional properties: +- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). + +Example: + +#include <dt-bindings/gpio/gpio.h> + +nau8315 { + compatible = "nuvoton,nau8315"; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt deleted file mode 100644 index 21cd310963b1..000000000000 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ /dev/null @@ -1,35 +0,0 @@ -NVIDIA Tegra30 HDA controller - -Required properties: -- compatible : For Tegra30, must contain "nvidia,tegra30-hda". Otherwise, - must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is - tegra114, tegra124, or tegra132. -- reg : Should contain the HDA registers location and length. -- interrupts : The interrupt from the HDA controller. -- clocks : Must contain an entry for each required entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x - -Optional properties: -- nvidia,model : The user-visible name of this sound complex. Since the property - is optional, legacy boards can use default name provided in hda driver. - -Example: - -hda@70030000 { - compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; - reg = <0x0 0x70030000 0x0 0x10000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_HDA>, - <&tegra_car TEGRA124_CLK_HDA2HDMI>, - <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; - clock-names = "hda", "hda2hdmi", "hda2codec_2x"; - resets = <&tegra_car 125>, /* hda */ - <&tegra_car 128>, /* hda2hdmi */ - <&tegra_car 111>; /* hda2codec_2x */ - reset-names = "hda", "hda2hdmi", "hda2codec_2x"; - nvidia,model = "jetson-tk1-hda"; -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml new file mode 100644 index 000000000000..e543a6123792 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra30-hda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra HDA controller + +description: | + The High Definition Audio (HDA) block provides a serial interface to + audio codec. It supports multiple input and output streams. + +maintainers: + - Thierry Reding <treding@nvidia.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^hda@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra30-hda + - items: + - enum: + - nvidia,tegra194-hda + - nvidia,tegra186-hda + - nvidia,tegra210-hda + - nvidia,tegra124-hda + - const: nvidia,tegra30-hda + - items: + - const: nvidia,tegra132-hda + - const: nvidia,tegra124-hda + - const: nvidia,tegra30-hda + + reg: + maxItems: 1 + + interrupts: + description: The interrupt from the HDA controller + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + items: + - const: hda + - const: hda2hdmi + - const: hda2codec_2x + + resets: + maxItems: 3 + + reset-names: + maxItems: 3 + items: + - const: hda + - const: hda2hdmi + - const: hda2codec_2x + + power-domains: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: dma-mem + - const: write + + iommus: + maxItems: 1 + + nvidia,model: + $ref: /schemas/types.yaml#/definitions/string + description: | + The user-visible name of this sound complex. If this property is + not specified then boards can use default name provided in hda driver. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include<dt-bindings/clock/tegra124-car-common.h> + #include<dt-bindings/interrupt-controller/arm-gic.h> + + hda@70030000 { + compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; + reg = <0x70030000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDA>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + nvidia,model = "jetson-tk1-hda"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml new file mode 100644 index 000000000000..679b49cbe30f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-va-macro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + compatible: + const: qcom,sm8250-lpass-va-macro + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + '#clock-cells': + const: 0 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: mclk + - const: core + - const: dcodec + + clock-output-names: + items: + - const: fsgen + + qcom,dmic-sample-rate: + description: dmic sample rate + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-micb-supply: + description: phandle to voltage regulator of MIC Bias + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + codec@3370000 { + compatible = "qcom,sm8250-lpass-va-macro"; + reg = <0x3370000 0x1000>; + #sound-dai-cells = <1>; + #clock-cells = <0>; + clocks = <&aoncc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "core", "dcodec"; + clock-output-names = "fsgen"; + qcom,dmic-sample-rate = <600000>; + vdd-micb-supply = <&vreg_s4a_1p8>; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml new file mode 100644 index 000000000000..435b019a1e3d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-wsa-macro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + compatible: + const: qcom,sm8250-lpass-wsa-macro + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + '#clock-cells': + const: 0 + + clocks: + maxItems: 5 + + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + + clock-output-names: + items: + - const: mclk + + qcom,dmic-sample-rate: + description: dmic sample rate + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-micb-supply: + description: phandle to voltage regulator of MIC Bias + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + codec@3240000 { + compatible = "qcom,sm8250-lpass-wsa-macro"; + reg = <0x3240000 0x1000>; + #sound-dai-cells = <1>; + #clock-cells = <0>; + clocks = <&audiocc 1>, + <&audiocc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + clock-output-names = "mclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml new file mode 100644 index 000000000000..72ad9ab91832 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc. SM8250 ASoC sound card driver + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + This bindings describes SC8250 SoC based sound cards + which uses LPASS internal codec for audio. + +properties: + compatible: + oneOf: + - const: qcom,sm8250-sndcard + - const: qcom,qrb5165-rb5-sndcard + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. Valid names could be power supplies, + MicBias of codec and the jacks on the board. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User visible long sound card name + +patternProperties: + ".*-dai-link$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + properties: + sound-dai: true + + platform: + description: Holds subnode which indicates platform dai. + type: object + properties: + sound-dai: true + + codec: + description: Holds subnode which indicates codec dai. + type: object + properties: + sound-dai: true + + required: + - link-name + - cpu + + additionalProperties: false + +required: + - compatible + - model + +additionalProperties: false + +examples: + + - | + #include <dt-bindings/sound/qcom,q6afe.h> + #include <dt-bindings/sound/qcom,q6asm.h> + sound { + compatible = "qcom,qrb5165-rb5-sndcard"; + model = "Qualcomm-qrb5165-RB5-WSA8815-Speakers-DMIC0"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia0"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b39743d3f7c4..b731f16aea84 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -253,523 +253,3 @@ This is example of TDM 6ch. Driver can automatically switches TDM <-> stereo mode in this case. see "Example: simple sound card for TDM" - -============================================= -Required properties: -============================================= - -- compatible : "renesas,rcar_sound-<soctype>", fallbacks - "renesas,rcar_sound-gen1" if generation1, and - "renesas,rcar_sound-gen2" if generation2 (or RZ/G1) - "renesas,rcar_sound-gen3" if generation3 (or RZ/G2) - Examples with soctypes are: - - "renesas,rcar_sound-r8a7742" (RZ/G1H) - - "renesas,rcar_sound-r8a7743" (RZ/G1M) - - "renesas,rcar_sound-r8a7744" (RZ/G1N) - - "renesas,rcar_sound-r8a7745" (RZ/G1E) - - "renesas,rcar_sound-r8a77470" (RZ/G1C) - - "renesas,rcar_sound-r8a774a1" (RZ/G2M) - - "renesas,rcar_sound-r8a774b1" (RZ/G2N) - - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - - "renesas,rcar_sound-r8a774e1" (RZ/G2H) - - "renesas,rcar_sound-r8a7778" (R-Car M1A) - - "renesas,rcar_sound-r8a7779" (R-Car H1) - - "renesas,rcar_sound-r8a7790" (R-Car H2) - - "renesas,rcar_sound-r8a7791" (R-Car M2-W) - - "renesas,rcar_sound-r8a7793" (R-Car M2-N) - - "renesas,rcar_sound-r8a7794" (R-Car E2) - - "renesas,rcar_sound-r8a7795" (R-Car H3) - - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - - "renesas,rcar_sound-r8a77990" (R-Car E3) - - "renesas,rcar_sound-r8a77995" (R-Car D3) -- reg : Should contain the register physical address. - required register is - SRU/ADG/SSI if generation1 - SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3 - Select extended AUDIO-DMAC-periperi address if SoC has it, - otherwise select normal AUDIO-DMAC-periperi address. -- reg-names : Should contain the register names. - scu/adg/ssi if generation1 - scu/adg/ssiu/ssi/audmapp if generation2/generation3 -- rcar_sound,ssi : Should contain SSI feature. - The number of SSI subnode should be same as HW. - see below for detail. -- rcar_sound,ssiu : Should contain SSIU feature. - The number of SSIU subnode should be same as HW. - see below for detail. -- rcar_sound,src : Should contain SRC feature. - The number of SRC subnode should be same as HW. - see below for detail. -- rcar_sound,ctu : Should contain CTU feature. - The number of CTU subnode should be same as HW. - see below for detail. -- rcar_sound,mix : Should contain MIX feature. - The number of MIX subnode should be same as HW. - see below for detail. -- rcar_sound,dvc : Should contain DVC feature. - The number of DVC subnode should be same as HW. - see below for detail. -- rcar_sound,dai : DAI contents. - The number of DAI subnode should be same as HW. - see below for detail. -- #sound-dai-cells : it must be 0 if your system is using single DAI - it must be 1 if your system is using multi DAI -- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. -- clock-names : List of necessary clock names. - "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", - "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i" - -Optional properties: -- #clock-cells : it must be 0 if your system has audio_clkout - it must be 1 if your system has audio_clkout0/1/2/3 -- clock-frequency : for all audio_clkout0/1/2/3 -- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn - is asynchronizes with lr-clock. -- resets : References to SSI resets. -- reset-names : List of valid reset names. - "ssi-all", "ssi.X" - -SSI subnode properties: -- interrupts : Should contain SSI interrupt for PIO transfer -- shared-pin : if shared clock pin -- pio-transfer : use PIO transfer mode -- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case -- dma : Should contain Audio DMAC entry -- dma-names : SSI case "rx" (=playback), "tx" (=capture) - Deprecated: see SSIU subnode properties - SSIU case "rxu" (=playback), "txu" (=capture) - -SSIU subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -SRC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -DVC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "tx" (=playback/capture) - -DAI subnode properties: -- playback : list of playback modules -- capture : list of capture modules - - -============================================= -Example: -============================================= - -rcar_sound: sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma0 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma0 0xbe>; - dma-names = "tx"; - }; - }; - - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; - }; - - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - - rcar_sound,src { - src0: src-0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssiu { - ssiu00: ssiu-0 { - dmas = <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx"; - }; - ssiu01: ssiu-1 { - dmas = <&audma0 0x35>, <&audma1 0x36>; - dma-names = "rx", "tx"; - }; - - ... - - ssiu95: ssiu-49 { - dmas = <&audma0 0xA5>, <&audma1 0xA6>; - dma-names = "rx", "tx"; - }; - ssiu96: ssiu-50 { - dmas = <&audma0 0xA7>, <&audma1 0xA8>; - dma-names = "rx", "tx"; - }; - ssiu97: ssiu-51 { - dmas = <&audma0 0xA9>, <&audma1 0xAA>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - - ... - - ssi8: ssi-8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,dai { - dai0 { - playback = <&ssi5 &src5>; - capture = <&ssi6>; - }; - dai1 { - playback = <&ssi3>; - }; - dai2 { - capture = <&ssi4>; - }; - dai3 { - playback = <&ssi7>; - }; - dai4 { - capture = <&ssi8>; - }; - }; -}; - -============================================= -Example: simple sound card -============================================= - - rsnd_ak4643: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; - }; - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; - }; - }; -}; - -&ssi1 { - shared-pin; -}; - -============================================= -Example: simple sound card for Asynchronous mode -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * SRC Asynchronous mode setting - * Playback: - * All input data will be converted to 48kHz - * Capture: - * Inputed 48kHz data will be converted to - * system specified Hz - */ - simple-audio-card,convert-rate = <48000>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for channel convert -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * CTU setting - * All input data will be converted to 2ch - * as output data - */ - simple-audio-card,convert-channels = <2>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for MIXer -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - simple-audio-card,cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - simple-audio-card,cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - simple-audio-card,codec { - ... - }; -}; - -&rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; - }; - dai1 { - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; - }; - }; -}; - -============================================= -Example: simple sound card for TDM -============================================= - -rsnd_tdm: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - dai-tdm-slot-num = <6>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&xxx>; - }; -}; - -============================================= -Example: simple sound card for TDM Split -============================================= - -sound_card: sound { - compatible = "audio-graph-scu-card"; - prefix = "xxxx"; - routing = "xxxx Playback", "DAI0 Playback", - "xxxx Playback", "DAI1 Playback", - "xxxx Playback", "DAI2 Playback", - "xxxx Playback", "DAI3 Playback"; - convert-channels = <8>; /* TDM Split */ - - dais = <&rsnd_port0 /* playback ch1/ch2 */ - &rsnd_port1 /* playback ch3/ch4 */ - &rsnd_port2 /* playback ch5/ch6 */ - &rsnd_port3 /* playback ch7/ch8 */ - >; -}; - -audio-codec { - ... - port { - codec_0: endpoint@1 { - remote-endpoint = <&rsnd_ep0>; - }; - codec_1: endpoint@2 { - remote-endpoint = <&rsnd_ep1>; - }; - codec_2: endpoint@3 { - remote-endpoint = <&rsnd_ep2>; - }; - codec_3: endpoint@4 { - remote-endpoint = <&rsnd_ep3>; - }; - }; -}; - -&rcar_sound { - ... - ports { - rsnd_port0: port@0 { - rsnd_ep0: endpoint { - remote-endpoint = <&codec_0>; - ... - playback = <&ssiu30 &ssi3>; - }; - }; - rsnd_port1: port@1 { - rsnd_ep1: endpoint { - remote-endpoint = <&codec_1>; - ... - playback = <&ssiu31 &ssi3>; - }; - }; - rsnd_port2: port@2 { - rsnd_ep2: endpoint { - remote-endpoint = <&codec_2>; - ... - playback = <&ssiu32 &ssi3>; - }; - }; - rsnd_port3: port@3 { - rsnd_ep3: endpoint { - remote-endpoint = <&codec_3>; - ... - playback = <&ssiu33 &ssi3>; - }; - }; - }; -}; - -============================================= -Example: simple sound card for Multi channel -============================================= - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml new file mode 100644 index 000000000000..0fd37aa84947 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -0,0 +1,447 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Sound Driver Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +properties: + + compatible: + oneOf: + # for Gen1 SoC + - items: + - enum: + - renesas,rcar_sound-r8a7778 # R-Car M1A + - renesas,rcar_sound-r8a7779 # R-Car H1 + - enum: + - renesas,rcar_sound-gen1 + # for Gen2 SoC + - items: + - enum: + - renesas,rcar_sound-r8a7742 # RZ/G1H + - renesas,rcar_sound-r8a7743 # RZ/G1M + - renesas,rcar_sound-r8a7744 # RZ/G1N + - renesas,rcar_sound-r8a7745 # RZ/G1E + - renesas,rcar_sound-r8a77470 # RZ/G1C + - renesas,rcar_sound-r8a7790 # R-Car H2 + - renesas,rcar_sound-r8a7791 # R-Car M2-W + - renesas,rcar_sound-r8a7793 # R-Car M2-N + - renesas,rcar_sound-r8a7794 # R-Car E2 + - enum: + - renesas,rcar_sound-gen2 + # for Gen3 SoC + - items: + - enum: + - renesas,rcar_sound-r8a774a1 # RZ/G2M + - renesas,rcar_sound-r8a774b1 # RZ/G2N + - renesas,rcar_sound-r8a774c0 # RZ/G2E + - renesas,rcar_sound-r8a774e1 # RZ/G2H + - renesas,rcar_sound-r8a7795 # R-Car H3 + - renesas,rcar_sound-r8a7796 # R-Car M3-W + - renesas,rcar_sound-r8a77961 # R-Car M3-W+ + - renesas,rcar_sound-r8a77965 # R-Car M3-N + - renesas,rcar_sound-r8a77990 # R-Car E3 + - renesas,rcar_sound-r8a77995 # R-Car D3 + - enum: + - renesas,rcar_sound-gen3 + # for Generic + - items: + - enum: + - renesas,rcar_sound-gen1 + - renesas,rcar_sound-gen2 + - renesas,rcar_sound-gen3 + + reg: + minItems: 1 + maxItems: 5 + + reg-names: + minItems: 1 + maxItems: 5 + + "#sound-dai-cells": + description: | + it must be 0 if your system is using single DAI + it must be 1 if your system is using multi DAIs + enum: [0, 1] + + "#clock-cells": + description: | + it must be 0 if your system has audio_clkout + it must be 1 if your system has audio_clkout0/1/2/3 + enum: [0, 1] + + clock-frequency: + description: for audio_clkout0/1/2/3 + $ref: /schemas/types.yaml#/definitions/uint32-array + + clkout-lr-asynchronous: + description: audio_clkoutn is asynchronizes with lr-clock. + $ref: /schemas/types.yaml#/definitions/flag + + power-domains: true + + resets: + maxItems: 11 + + reset-names: + maxItems: 11 + + clocks: + description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. + minItems: 1 + maxItems: 31 + + clock-names: + description: List of necessary clock names. + minItems: 1 + maxItems: 31 + items: + oneOf: + - const: ssi-all + - pattern: '^ssi\.[0-9]$' + - pattern: '^src\.[0-9]$' + - pattern: '^mix\.[0-1]$' + - pattern: '^ctu\.[0-1]$' + - pattern: '^dvc\.[0-1]$' + - pattern: '^clk_(a|b|c|i)$' + + port: true + +# use patternProperties to avoid naming "xxx,yyy" issue +patternProperties: + "^rcar_sound,dvc$": + description: DVC subnode. + type: object + patternProperties: + "^dvc-[0-1]$": + type: object + properties: + dmas: + maxItems: 1 + dma-names: + const: "tx" + required: + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,mix$": + description: MIX subnode. + type: object + patternProperties: + "^mix-[0-1]$": + type: object + # no properties + additionalProperties: false + + "^rcar_sound,ctu$": + description: CTU subnode. + type: object + patternProperties: + "^ctu-[0-7]$": + type: object + # no properties + additionalProperties: false + + "^rcar_sound,src$": + description: SRC subnode. + type: object + patternProperties: + "^src-[0-9]$": + type: object + properties: + interrupts: + maxItems: 1 + dmas: + maxItems: 2 + dma-names: + allOf: + - items: + enum: + - tx + - rx + required: + - interrupts + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,ssiu$": + description: SSIU subnode. + type: object + patternProperties: + "^ssiu-[0-9]+$": + type: object + properties: + dmas: + maxItems: 2 + dma-names: + allOf: + - items: + enum: + - tx + - rx + required: + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,ssi$": + description: SSI subnode. + type: object + patternProperties: + "^ssi-[0-9]$": + type: object + properties: + interrupts: + maxItems: 1 + dmas: + minItems: 2 + maxItems: 4 + dma-names: + allOf: + - items: + enum: + - tx + - rx + - txu # if no ssiu node + - rxu # if no ssiu node + + shared-pin: + description: shared clock pin + $ref: /schemas/types.yaml#/definitions/flag + pio-transfer: + description: PIO transfer mode + $ref: /schemas/types.yaml#/definitions/flag + no-busif: + description: BUSIF is not used when [mem -> SSI] via DMA case + $ref: /schemas/types.yaml#/definitions/flag + required: + - interrupts + - dmas + - dma-names + additionalProperties: false + + # For DAI base + "^rcar_sound,dai$": + description: DAI subnode. + type: object + patternProperties: + "^dai([0-9]+)?$": + type: object + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + anyOf: + - required: + - playback + - required: + - capture + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - "#sound-dai-cells" + +allOf: + - $ref: audio-graph.yaml# + - $ref: audio-graph-port.yaml# + - if: + properties: + compatible: + contains: + const: renesas,rcar_sound-gen1 + then: + properties: + reg: + maxItems: 3 + reg-names: + maxItems: 3 + items: + enum: + - scu + - ssi + - adg + else: + properties: + reg: + maxItems: 5 + reg-names: + maxItems: 5 + items: + enum: + - scu + - adg + - ssiu + - ssi + - audmapp + +additionalProperties: false + +examples: + - | + rcar_sound: sound@ec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; + reg = <0xec500000 0x1000>, /* SCU */ + <0xec5a0000 0x100>, /* ADG */ + <0xec540000 0x1000>, /* SSIU */ + <0xec541000 0x1280>, /* SSI */ + <0xec740000 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks 1005>, /* SSI-ALL */ + <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */ + <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */ + <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */ + <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */ + <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */ + <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */ + <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */ + <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */ + <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */ + <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */ + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */ + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */ + <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */ + <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */ + <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */ + + clock-names = "ssi-all", + "ssi.9", "ssi.8", + "ssi.7", "ssi.6", + "ssi.5", "ssi.4", + "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", + "src.7", "src.6", + "src.5", "src.4", + "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", + "clk_c", "clk_i"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + status = "disabled"; + }; + src1: src-1 { + interrupts = <0 353 0>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + /* skip after src-2 */ + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + /* skip after ssiu-2 */ + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <0 370 1>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <0 371 1>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + /* skip other ssi-2 */ + }; + + /* DAI base */ + rcar_sound,dai { + dai0 { + playback = <&ssi5 &src5>; + capture = <&ssi6>; + }; + dai1 { + playback = <&ssi3>; + }; + dai2 { + capture = <&ssi4>; + }; + dai3 { + playback = <&ssi7>; + }; + dai4 { + capture = <&ssi8>; + }; + }; + + /* assume audio-graph */ + port { + rsnd_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + }; + + + /* assume audio-graph */ + codec { + port { + codec_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index 707fa98d1310..9c5fadb6ac82 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -44,6 +44,8 @@ Optional properties: - realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of the particular DMIC. +- realtek,dmic-clk-driving-high : Set the high drving of the DMIC clock out. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1 diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml new file mode 100644 index 000000000000..5986d1fcbb54 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/simple-audio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Audio Multiplexer + +maintainers: + - Alexandre Belloni <aleandre.belloni@bootlin.com> + +description: | + Simple audio multiplexers are driven using gpios, allowing to select which of + their input line is connected to the output line. + +properties: + compatible: + const: simple-audio-mux + + mux-gpios: + description: | + GPIOs used to select the input line. + + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: + Used as prefix for sink/source names of the component. Must be a + unique string among multiple instances of the same component. + +required: + - compatible + - mux-gpios + +additionalProperties: false + +examples: + - | + mux { + compatible = "simple-audio-mux"; + mux-gpios = <&gpio 3 0>; + }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index 35e669020296..45fd9fd9eb54 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -13,13 +13,11 @@ definitions: frame-master: description: Indicates dai-link frame master. - $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle bitclock-master: description: Indicates dai-link bit clock master - $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle frame-inversion: description: dai-link uses frame clock inversion diff --git a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt deleted file mode 100644 index 864f5b00b031..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt +++ /dev/null @@ -1,63 +0,0 @@ -STMicroelectronics Audio Digital Filter Sigma Delta modulators(DFSDM) - -The DFSDM allows PDM microphones capture through SPI interface. The Audio -interface is seems as a sub block of the DFSDM device. -For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt - -Required properties: - - compatible: "st,stm32h7-dfsdm-dai". - - - #sound-dai-cells : Must be equal to 0 - - - io-channels : phandle to iio dfsdm instance node. - -Example of a sound card using audio DFSDM node. - - sound_card { - compatible = "audio-graph-card"; - - dais = <&cpu_port>; - }; - - dfsdm: dfsdm@40017000 { - compatible = "st,stm32h7-dfsdm"; - reg = <0x40017000 0x400>; - clocks = <&rcc DFSDM1_CK>; - clock-names = "dfsdm"; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dfsdm_adc0: filter@0 { - compatible = "st,stm32-dfsdm-dmic"; - reg = <0>; - interrupts = <110>; - dmas = <&dmamux1 101 0x400 0x00>; - dma-names = "rx"; - st,adc-channels = <1>; - st,adc-channel-names = "dmic0"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; - st,filter-order = <5>; - - dfsdm_dai0: dfsdm-dai { - compatible = "st,stm32h7-dfsdm-dai"; - #sound-dai-cells = <0>; - io-channels = <&dfsdm_adc0 0>; - cpu_port: port { - dfsdm_endpoint: endpoint { - remote-endpoint = <&dmic0_endpoint>; - }; - }; - }; - }; - - dmic0: dmic@0 { - compatible = "dmic-codec"; - #sound-dai-cells = <0>; - port { - dmic0_endpoint: endpoint { - remote-endpoint = <&dfsdm_endpoint>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt deleted file mode 100644 index c42b91e525fa..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ /dev/null @@ -1,107 +0,0 @@ -STMicroelectronics STM32 Serial Audio Interface (SAI). - -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. -The SAI contains two independent audio sub-blocks. Each sub-block has -its own clock generator and I/O lines controller. - -Required properties: - - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai" - - reg: Base address and size of SAI common register set. - - clocks: Must contain phandle and clock specifier pairs for each entry - in clock-names. - - clock-names: Must contain "pclk" "x8k" and "x11k" - "pclk": Clock which feeds the peripheral bus interface. - Mandatory for "st,stm32h7-sai" compatible. - Not used for "st,stm32f4-sai" compatible. - "x8k": SAI parent clock for sampling rates multiple of 8kHz. - "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - - interrupts: cpu DAI interrupt line shared by SAI sub-blocks - -Optional properties: - - resets: Reference to a reset controller asserting the SAI - -SAI subnodes: -Two subnodes corresponding to SAI sub-block instances A et B can be defined. -Subnode can be omitted for unsused sub-block. - -SAI subnodes required properties: - - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b" - for SAI sub-block A or B respectively. - - reg: Base address and size of SAI sub-block register set. - - clocks: Must contain one phandle and clock specifier pair - for sai_ck which feeds the internal clock generator. - If the SAI shares a master clock, with another SAI set as MCLK - clock provider, SAI provider phandle must be specified here. - - clock-names: Must contain "sai_ck". - Must also contain "MCLK", if SAI shares a master clock, - with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - - dma-names: identifier string for each DMA request line - "tx": if sai sub-block is configured as playback DAI - "rx": if sai sub-block is configured as capture DAI - - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml - -SAI subnodes Optional properties: - - st,sync: specify synchronization mode. - By default SAI sub-block is in asynchronous mode. - This property sets SAI sub-block as slave of another SAI sub-block. - Must contain the phandle and index of the sai sub-block providing - the synchronization. - - st,iec60958: support S/PDIF IEC6958 protocol for playback - IEC60958 protocol is not available for capture. - By default, custom protocol is assumed, meaning that protocol is - configured according to protocol defined in related DAI link node, - such as i2s, left justified, right justified, dsp and pdm protocols. - Note: ac97 protocol is not supported by SAI driver - - #clock-cells: should be 0. This property must be present if the SAI device - is a master clock provider, according to clocks bindings, described in - Documentation/devicetree/bindings/clock/clock-bindings.txt. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -sound_card { - compatible = "audio-graph-card"; - dais = <&sai1b_port>; -}; - -sai1: sai1@40015800 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40015800 0x400>; - reg = <0x40015800 0x4>; - clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "pclk", "x8k", "x11k"; - interrupts = <87>; - - sai1a: audio-controller@40015804 { - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1C>; - clocks = <&rcc SAI1_CK>; - clock-names = "sai_ck"; - dmas = <&dmamux1 1 87 0x400 0x0>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1a>; - - sai1b_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - format = "i2s"; - }; - }; - }; -}; - -audio-codec { - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml new file mode 100644 index 000000000000..6ad48c7681c1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Serial Audio Interface (SAI) + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +description: + The SAI interface (Serial Audio Interface) offers a wide set of audio + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. + The SAI contains two independent audio sub-blocks. Each sub-block has + its own clock generator and I/O lines controller. + +properties: + compatible: + enum: + - st,stm32f4-sai + - st,stm32h7-sai + + reg: + items: + - description: Base address and size of SAI common register set. + - description: Base address and size of SAI identification register set. + minItems: 1 + maxItems: 2 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + +patternProperties: + "^audio-controller@[0-9a-f]+$": + type: object + description: + Two subnodes corresponding to SAI sub-block instances A et B + can be defined. Subnode can be omitted for unsused sub-block. + + properties: + compatible: + description: Compatible for SAI sub-block A or B. + pattern: "st,stm32-sai-sub-[ab]" + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: sai_ck clock feeding the internal clock generator. + - description: MCLK clock from a SAI set as master clock provider. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: sai_ck + - const: MCLK + minItems: 1 + maxItems: 2 + + dmas: + maxItems: 1 + + dma-names: + description: | + rx: SAI sub-block is configured as a capture DAI. + tx: SAI sub-block is configured as a playback DAI. + enum: [ rx, tx ] + + st,sync: + description: + Configure the SAI sub-block as slave of another SAI sub-block. + By default SAI sub-block is in asynchronous mode. + Must contain the phandle and index of the SAI sub-block providing + the synchronization. + allOf: + - $ref: /schemas/types.yaml#definitions/phandle-array + - maxItems: 1 + + st,iec60958: + description: + If set, support S/PDIF IEC6958 protocol for playback. + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + allOf: + - $ref: /schemas/types.yaml#definitions/flag + + "#clock-cells": + description: Configure the SAI device as master clock provider. + const: 0 + + required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-sai + + - then: + properties: + clocks: + items: + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + - const: x8k + - const: x11k + + - else: + properties: + clocks: + items: + - description: pclk feeds the peripheral bus interface. + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + - const: pclk + - const: x8k + - const: x11k + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + dmas = <&dmamux1 89 0x400 0x01>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + }; + }; + +... diff --git a/Documentation/driver-api/auxiliary_bus.rst b/Documentation/driver-api/auxiliary_bus.rst new file mode 100644 index 000000000000..2312506b0674 --- /dev/null +++ b/Documentation/driver-api/auxiliary_bus.rst @@ -0,0 +1,234 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +============= +Auxiliary Bus +============= + +In some subsystems, the functionality of the core device (PCI/ACPI/other) is +too complex for a single device to be managed by a monolithic driver +(e.g. Sound Open Firmware), multiple devices might implement a common +intersection of functionality (e.g. NICs + RDMA), or a driver may want to +export an interface for another subsystem to drive (e.g. SIOV Physical Function +export Virtual Function management). A split of the functinoality into child- +devices representing sub-domains of functionality makes it possible to +compartmentalize, layer, and distribute domain-specific concerns via a Linux +device-driver model. + +An example for this kind of requirement is the audio subsystem where a single +IP is handling multiple entities such as HDMI, Soundwire, local devices such as +mics/speakers etc. The split for the core's functionality can be arbitrary or +be defined by the DSP firmware topology and include hooks for test/debug. This +allows for the audio core device to be minimal and focused on hardware-specific +control and communication. + +Each auxiliary_device represents a part of its parent functionality. The +generic behavior can be extended and specialized as needed by encapsulating an +auxiliary_device within other domain-specific structures and the use of .ops +callbacks. Devices on the auxiliary bus do not share any structures and the use +of a communication channel with the parent is domain-specific. + +Note that ops are intended as a way to augment instance behavior within a class +of auxiliary devices, it is not the mechanism for exporting common +infrastructure from the parent. Consider EXPORT_SYMBOL_NS() to convey +infrastructure from the parent module to the auxiliary module(s). + + +When Should the Auxiliary Bus Be Used +===================================== + +The auxiliary bus is to be used when a driver and one or more kernel modules, +who share a common header file with the driver, need a mechanism to connect and +provide access to a shared object allocated by the auxiliary_device's +registering driver. The registering driver for the auxiliary_device(s) and the +kernel module(s) registering auxiliary_drivers can be from the same subsystem, +or from multiple subsystems. + +The emphasis here is on a common generic interface that keeps subsystem +customization out of the bus infrastructure. + +One example is a PCI network device that is RDMA-capable and exports a child +device to be driven by an auxiliary_driver in the RDMA subsystem. The PCI +driver allocates and registers an auxiliary_device for each physical +function on the NIC. The RDMA driver registers an auxiliary_driver that claims +each of these auxiliary_devices. This conveys data/ops published by the parent +PCI device/driver to the RDMA auxiliary_driver. + +Another use case is for the PCI device to be split out into multiple sub +functions. For each sub function an auxiliary_device is created. A PCI sub +function driver binds to such devices that creates its own one or more class +devices. A PCI sub function auxiliary device is likely to be contained in a +struct with additional attributes such as user defined sub function number and +optional attributes such as resources and a link to the parent device. These +attributes could be used by systemd/udev; and hence should be initialized +before a driver binds to an auxiliary_device. + +A key requirement for utilizing the auxiliary bus is that there is no +dependency on a physical bus, device, register accesses or regmap support. +These individual devices split from the core cannot live on the platform bus as +they are not physical devices that are controlled by DT/ACPI. The same +argument applies for not using MFD in this scenario as MFD relies on individual +function devices being physical devices. + +Auxiliary Device +================ + +An auxiliary_device represents a part of its parent device's functionality. It +is given a name that, combined with the registering drivers KBUILD_MODNAME, +creates a match_name that is used for driver binding, and an id that combined +with the match_name provide a unique name to register with the bus subsystem. + +Registering an auxiliary_device is a two-step process. First call +auxiliary_device_init(), which checks several aspects of the auxiliary_device +struct and performs a device_initialize(). After this step completes, any +error state must have a call to auxiliary_device_uninit() in its resolution path. +The second step in registering an auxiliary_device is to perform a call to +auxiliary_device_add(), which sets the name of the device and add the device to +the bus. + +Unregistering an auxiliary_device is also a two-step process to mirror the +register process. First call auxiliary_device_delete(), then call +auxiliary_device_uninit(). + +.. code-block:: c + + struct auxiliary_device { + struct device dev; + const char *name; + u32 id; + }; + +If two auxiliary_devices both with a match_name "mod.foo" are registered onto +the bus, they must have unique id values (e.g. "x" and "y") so that the +registered devices names are "mod.foo.x" and "mod.foo.y". If match_name + id +are not unique, then the device_add fails and generates an error message. + +The auxiliary_device.dev.type.release or auxiliary_device.dev.release must be +populated with a non-NULL pointer to successfully register the auxiliary_device. + +The auxiliary_device.dev.parent must also be populated. + +Auxiliary Device Memory Model and Lifespan +------------------------------------------ + +The registering driver is the entity that allocates memory for the +auxiliary_device and register it on the auxiliary bus. It is important to note +that, as opposed to the platform bus, the registering driver is wholly +responsible for the management for the memory used for the driver object. + +A parent object, defined in the shared header file, contains the +auxiliary_device. It also contains a pointer to the shared object(s), which +also is defined in the shared header. Both the parent object and the shared +object(s) are allocated by the registering driver. This layout allows the +auxiliary_driver's registering module to perform a container_of() call to go +from the pointer to the auxiliary_device, that is passed during the call to the +auxiliary_driver's probe function, up to the parent object, and then have +access to the shared object(s). + +The memory for the auxiliary_device is freed only in its release() callback +flow as defined by its registering driver. + +The memory for the shared object(s) must have a lifespan equal to, or greater +than, the lifespan of the memory for the auxiliary_device. The auxiliary_driver +should only consider that this shared object is valid as long as the +auxiliary_device is still registered on the auxiliary bus. It is up to the +registering driver to manage (e.g. free or keep available) the memory for the +shared object beyond the life of the auxiliary_device. + +The registering driver must unregister all auxiliary devices before its own +driver.remove() is completed. + +Auxiliary Drivers +================= + +Auxiliary drivers follow the standard driver model convention, where +discovery/enumeration is handled by the core, and drivers +provide probe() and remove() methods. They support power management +and shutdown notifications using the standard conventions. + +.. code-block:: c + + struct auxiliary_driver { + int (*probe)(struct auxiliary_device *, + const struct auxiliary_device_id *id); + void (*remove)(struct auxiliary_device *); + void (*shutdown)(struct auxiliary_device *); + int (*suspend)(struct auxiliary_device *, pm_message_t); + int (*resume)(struct auxiliary_device *); + struct device_driver driver; + const struct auxiliary_device_id *id_table; + }; + +Auxiliary drivers register themselves with the bus by calling +auxiliary_driver_register(). The id_table contains the match_names of auxiliary +devices that a driver can bind with. + +Example Usage +============= + +Auxiliary devices are created and registered by a subsystem-level core device +that needs to break up its functionality into smaller fragments. One way to +extend the scope of an auxiliary_device is to encapsulate it within a domain- +pecific structure defined by the parent device. This structure contains the +auxiliary_device and any associated shared data/callbacks needed to establish +the connection with the parent. + +An example is: + +.. code-block:: c + + struct foo { + struct auxiliary_device auxdev; + void (*connect)(struct auxiliary_device *auxdev); + void (*disconnect)(struct auxiliary_device *auxdev); + void *data; + }; + +The parent device then registers the auxiliary_device by calling +auxiliary_device_init(), and then auxiliary_device_add(), with the pointer to +the auxdev member of the above structure. The parent provides a name for the +auxiliary_device that, combined with the parent's KBUILD_MODNAME, creates a +match_name that is be used for matching and binding with a driver. + +Whenever an auxiliary_driver is registered, based on the match_name, the +auxiliary_driver's probe() is invoked for the matching devices. The +auxiliary_driver can also be encapsulated inside custom drivers that make the +core device's functionality extensible by adding additional domain-specific ops +as follows: + +.. code-block:: c + + struct my_ops { + void (*send)(struct auxiliary_device *auxdev); + void (*receive)(struct auxiliary_device *auxdev); + }; + + + struct my_driver { + struct auxiliary_driver auxiliary_drv; + const struct my_ops ops; + }; + +An example of this type of usage is: + +.. code-block:: c + + const struct auxiliary_device_id my_auxiliary_id_table[] = { + { .name = "foo_mod.foo_dev" }, + { }, + }; + + const struct my_ops my_custom_ops = { + .send = my_tx, + .receive = my_rx, + }; + + const struct my_driver my_drv = { + .auxiliary_drv = { + .name = "myauxiliarydrv", + .id_table = my_auxiliary_id_table, + .probe = my_probe, + .remove = my_remove, + .shutdown = my_shutdown, + }, + .ops = my_custom_ops, + }; diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index f357f3eb400c..86759a74b7f1 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -72,6 +72,7 @@ available subsections can be seen below. thermal/index fpga/index acpi/index + auxiliary_bus backlight/lp855x-driver.rst connector console |