Merge tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...

39 files changed, 212 insertions, 145 deletions

diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 94944cc21931..dd03e3860f97 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -311,6 +311,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
index ace3eb8a97b8..4e1bf080eaca 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -321,6 +321,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index da1399057634..815119c12bd4 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -625,6 +625,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index de2fb1c01b6e..b82381229adf 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -27,6 +27,16 @@
 	};
 
 	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
 		adsp_region: adsp@3300000 {
 			reg = <0x03300000 0x1400000>;
 			no-map;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index af9194eca556..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,14 +56,10 @@
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,8 +80,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 4>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -94,8 +88,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 5>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -104,8 +96,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 6>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -114,8 +104,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 7>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 1f34c7553459..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,7 +55,5 @@
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index aac41192caa1..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,14 +36,10 @@
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,8 +52,6 @@
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -66,8 +60,6 @@
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index a4421db3784e..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,7 +43,5 @@
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 8b65af4a7147..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,8 +92,6 @@
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -156,21 +154,6 @@
 				label = "bootloader environment";
 			};
 		};
-
-		otp-1 {
-			compatible = "user-otp";
-
-			nvmem-layout {
-				compatible = "kontron,sl28-vpd";
-
-				serial_number: serial-number {
-				};
-
-				base_mac_address: base-mac-address {
-					#nvmem-cell-cells = <1>;
-				};
-			};
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 1f3d225e64ec..06b94bbc2b97 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -117,7 +117,7 @@ lsio_subsys: bus@5d000000 {
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
 			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
-		clock-names = "fspi", "fspi_en";
+		clock-names = "fspi_en", "fspi";
 		power-domains = <&pd IMX_SC_R_FSPI_0>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1bcf228a22b8..852420349c01 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -121,8 +121,6 @@
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -136,6 +134,9 @@
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 6357078185ed..0e8f0d7161ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ed9ac6c5047c..9e0ddd6b7a32 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -296,6 +296,7 @@
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -310,6 +311,7 @@
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -324,6 +326,7 @@
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -340,6 +343,7 @@
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -397,6 +401,7 @@
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a19224fe1a6a..2dd60e3252f3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1131,8 +1131,8 @@
 				reg = <0x32e90000 0x238>;
 				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pix", "axi", "disp_axi";
 				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
 						  <&clk IMX8MP_VIDEO_PLL1>;
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 2076f9c9983a..41efd97dd6d6 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -164,6 +164,8 @@
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -174,6 +176,8 @@
 			lpi2c2: i2c@44350000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -343,6 +347,8 @@
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -353,6 +359,8 @@
 			lpi2c4: i2c@42540000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -455,6 +463,8 @@
 			lpi2c5: i2c@426b0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -465,6 +475,8 @@
 			lpi2c6: i2c@426c0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -475,6 +487,8 @@
 			lpi2c7: i2c@426d0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -485,6 +499,8 @@
 			lpi2c8: i2c@426e0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -580,9 +596,9 @@
 			eqos: ethernet@428a0000 {
 				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
 				reg = <0x428a0000 0x10000>;
-				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "eth_wake_irq", "macirq";
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
 				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
 					 <&clk IMX93_CLK_ENET_QOS_GATE>,
 					 <&clk IMX93_CLK_ENET_TIMER2>,
@@ -595,7 +611,7 @@
 							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
-				clk_csr = <0>;
+				snps,clk-csr = <0>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 133dbe5b429d..7096b999b33f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -22,7 +22,7 @@
 
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		apbmisc: misc@100000 {
 			compatible = "nvidia,tegra194-misc";
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 8fe8eda7654d..f1748cff8a33 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -20,7 +20,7 @@
 
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		misc@100000 {
 			compatible = "nvidia,tegra234-misc";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index c492db856190..82e260375174 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -33,7 +33,3 @@
 &gpio_leds_default {
 	pins = "gpio81", "gpio82", "gpio83";
 };
-
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 700cf81cbf8c..8433c9710b1c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -25,6 +25,11 @@
 	gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
 };
 
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
 &button_default {
 	pins = "gpio37";
 	bias-pull-down;
@@ -34,6 +39,25 @@
 	pins = "gpio20", "gpio21", "gpio22";
 };
 
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
+/* This selects the external SIM card slot by default */
+&msmgpio {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			bias-disable;
+			output-high;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index 790a9696da9d..cdf34b74fa8f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -92,9 +92,6 @@
 };
 
 &mpss {
-	pinctrl-0 = <&sim_ctrl_default>;
-	pinctrl-names = "default";
-
 	status = "okay";
 };
 
@@ -240,11 +237,4 @@
 		drive-strength = <2>;
 		bias-disable;
 	};
-
-	sim_ctrl_default: sim-ctrl-default-state {
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 3ccb5ffdb3ca..24fa449d48a6 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -241,7 +241,7 @@
 };
 
 &remoteproc_nsp0 {
-	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index bdcb74925313..8f4ab6bd2886 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2131,6 +2131,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 98e71b933437..99c6d6574559 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -370,6 +370,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s11b: smps11 {
@@ -377,6 +378,7 @@
 			regulator-min-microvolt = <1272000>;
 			regulator-max-microvolt = <1272000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s12b: smps12 {
@@ -384,6 +386,7 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <984000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l3b: ldo3 {
@@ -441,6 +444,7 @@
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
 		};
 	};
 
@@ -772,75 +776,88 @@
 	pmic-die-temp@3 {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
 	};
 
 	xo-therm@44 {
 		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
 	};
 
 	pmic-die-temp@103 {
 		reg = <PM8350_ADC7_DIE_TEMP(1)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
 	};
 
 	sys-therm@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm1";
 	};
 
 	sys-therm@145 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm2";
 	};
 
 	sys-therm@146 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm3";
 	};
 
 	sys-therm@147 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm4";
 	};
 
 	pmic-die-temp@303 {
 		reg = <PM8350_ADC7_DIE_TEMP(3)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
 	};
 
 	sys-therm@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm5";
 	};
 
 	sys-therm@345 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm6";
 	};
 
 	sys-therm@346 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm7";
 	};
 
 	sys-therm@347 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm8";
 	};
 
 	pmic-die-temp@403 {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
 	};
 };
 
@@ -884,9 +901,9 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"TX DMIC0", "MIC BIAS1",
-		"TX DMIC1", "MIC BIAS2",
-		"TX DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
@@ -937,7 +954,7 @@
 	va-dai-link {
 		link-name = "VA Capture";
 		cpu {
-			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
 		};
 
 		platform {
@@ -1062,7 +1079,7 @@
 
 	vdd-micb-supply = <&vreg_s10b>;
 
-	qcom,dmic-sample-rate = <600000>;
+	qcom,dmic-sample-rate = <4800000>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 0d02599d8867..42bfa9fa5b96 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2504,12 +2504,12 @@
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2600,7 +2600,7 @@
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 			#sound-dai-cells = <1>;
@@ -2609,15 +2609,15 @@
 
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
-			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
-			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 4d6ec815b78b..fbd67d2c8d78 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1078,6 +1078,7 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 31b88c738510..068ee4f72485 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1209,6 +1209,7 @@
 			clock-names = "xo";
 
 			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
 
 			memory-region = <&pil_cdsp_mem>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index fd20096cfc6e..13e0ce828606 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1826,7 +1826,7 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1925,7 +1925,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
index acaa99c5ff8b..a85d47f7a9e8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
@@ -625,6 +625,6 @@
 };
 
 &venus {
-	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 1c97e28da6ad..1a5a612d4234 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1664,6 +1664,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clock-names =
 				"core_clk",
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a33bcf4..b285b1530c10 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2143,8 +2143,8 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
@@ -4003,6 +4003,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ff4d342c0725..5d0888398b3c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -66,7 +66,7 @@
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
@@ -89,7 +89,7 @@
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
@@ -108,7 +108,7 @@
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
@@ -127,7 +127,7 @@
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
@@ -146,7 +146,7 @@
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
@@ -165,7 +165,7 @@
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
@@ -184,7 +184,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
@@ -203,7 +203,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x3";
 			reg = <0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
@@ -1905,6 +1905,7 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -1997,7 +1998,7 @@
 		lpass_tlmm: pinctrl@6e80000 {
 			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
 			reg = <0 0x06e80000 0 0x20000>,
-			      <0 0x0725a000 0 0x10000>;
+			      <0 0x07250000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
@@ -2691,7 +2692,7 @@
 				pins = "gpio28", "gpio29";
 				function = "qup1_se0";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@@ -2699,7 +2700,7 @@
 				pins = "gpio32", "gpio33";
 				function = "qup1_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@@ -2707,7 +2708,7 @@
 				pins = "gpio36", "gpio37";
 				function = "qup1_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@@ -2715,7 +2716,7 @@
 				pins = "gpio40", "gpio41";
 				function = "qup1_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@@ -2723,7 +2724,7 @@
 				pins = "gpio44", "gpio45";
 				function = "qup1_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@@ -2731,7 +2732,7 @@
 				pins = "gpio52", "gpio53";
 				function = "qup1_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@@ -2739,7 +2740,7 @@
 				pins = "gpio48", "gpio49";
 				function = "qup1_se6";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@@ -2747,14 +2748,14 @@
 					pins = "gpio57";
 					function = "qup2_se0_l1_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 
 				sda-pins {
 					pins = "gpio56";
 					function = "qup2_se0_l0_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 			};
 
@@ -2763,7 +2764,7 @@
 				pins = "gpio60", "gpio61";
 				function = "qup2_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@@ -2771,7 +2772,7 @@
 				pins = "gpio64", "gpio65";
 				function = "qup2_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@@ -2779,7 +2780,7 @@
 				pins = "gpio68", "gpio69";
 				function = "qup2_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@@ -2787,7 +2788,7 @@
 				pins = "gpio2", "gpio3";
 				function = "qup2_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@@ -2795,7 +2796,7 @@
 				pins = "gpio80", "gpio81";
 				function = "qup2_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@@ -2803,7 +2804,7 @@
 				pins = "gpio72", "gpio106";
 				function = "qup2_se7";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_spi0_cs: qup-spi0-cs-state {
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 2a6b4f676458..36d42484142a 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -204,8 +204,8 @@ static int weim_parse_dt(struct platform_device *pdev)
 	const struct of_device_id *of_id = of_match_device(weim_id_table,
 							   &pdev->dev);
 	const struct imx_weim_devtype *devtype = of_id->data;
+	int ret = 0, have_child = 0;
 	struct device_node *child;
-	int ret, have_child = 0;
 	struct weim_priv *priv;
 	void __iomem *base;
 	u32 reg;
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index 73140b854b31..c15928b8c5cc 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/of.h>
 
 #include "common.h"
 
@@ -436,7 +435,7 @@ struct scmi_device *scmi_device_create(struct device_node *np,
 	/* Nothing to do. */
 	if (!phead) {
 		mutex_unlock(&scmi_requested_devices_mtx);
-		return scmi_dev;
+		return NULL;
 	}
 
 	/* Walk the list of requested devices for protocol and create them */
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index d21c7eafd641..dbc474ff62b7 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -2221,8 +2221,8 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
 	hash_init(info->pending_xfers);
 
 	/* Allocate a bitmask sized to hold MSG_TOKEN_MAX tokens */
-	info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(MSG_TOKEN_MAX),
-					      sizeof(long), GFP_KERNEL);
+	info->xfer_alloc_table = devm_bitmap_zalloc(dev, MSG_TOKEN_MAX,
+						    GFP_KERNEL);
 	if (!info->xfer_alloc_table)
 		return -ENOMEM;
 
@@ -2657,6 +2657,7 @@ static int scmi_probe(struct platform_device *pdev)
 	struct scmi_handle *handle;
 	const struct scmi_desc *desc;
 	struct scmi_info *info;
+	bool coex = IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX);
 	struct device *dev = &pdev->dev;
 	struct device_node *child, *np = dev->of_node;
 
@@ -2731,16 +2732,13 @@ static int scmi_probe(struct platform_device *pdev)
 			dev_warn(dev, "Failed to setup SCMI debugfs.\n");
 
 		if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
-			bool coex =
-			      IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX);
-
 			ret = scmi_debugfs_raw_mode_setup(info);
 			if (!coex) {
 				if (ret)
 					goto clear_dev_req_notifier;
 
-				/* Bail out anyway when coex enabled */
-				return ret;
+				/* Bail out anyway when coex disabled. */
+				return 0;
 			}
 
 			/* Coex enabled, carry on in any case. */
@@ -2764,6 +2762,8 @@ static int scmi_probe(struct platform_device *pdev)
 	ret = scmi_protocol_acquire(handle, SCMI_PROTOCOL_BASE);
 	if (ret) {
 		dev_err(dev, "unable to communicate with SCMI\n");
+		if (coex)
+			return 0;
 		goto notification_exit;
 	}
 
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 0d9c9538b7f4..112c285deb97 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -52,6 +52,39 @@ static bool mailbox_chan_available(struct device_node *of_node, int idx)
 					   "#mbox-cells", idx, NULL);
 }
 
+static int mailbox_chan_validate(struct device *cdev)
+{
+	int num_mb, num_sh, ret = 0;
+	struct device_node *np = cdev->of_node;
+
+	num_mb = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+	num_sh = of_count_phandle_with_args(np, "shmem", NULL);
+	/* Bail out if mboxes and shmem descriptors are inconsistent */
+	if (num_mb <= 0 || num_sh > 2 || num_mb != num_sh) {
+		dev_warn(cdev, "Invalid channel descriptor for '%s'\n",
+			 of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	if (num_sh > 1) {
+		struct device_node *np_tx, *np_rx;
+
+		np_tx = of_parse_phandle(np, "shmem", 0);
+		np_rx = of_parse_phandle(np, "shmem", 1);
+		/* SCMI Tx and Rx shared mem areas have to be distinct */
+		if (!np_tx || !np_rx || np_tx == np_rx) {
+			dev_warn(cdev, "Invalid shmem descriptor for '%s'\n",
+				 of_node_full_name(np));
+			ret = -EINVAL;
+		}
+
+		of_node_put(np_tx);
+		of_node_put(np_rx);
+	}
+
+	return ret;
+}
+
 static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 			      bool tx)
 {
@@ -64,6 +97,10 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 	resource_size_t size;
 	struct resource res;
 
+	ret = mailbox_chan_validate(cdev);
+	if (ret)
+		return ret;
+
 	smbox = devm_kzalloc(dev, sizeof(*smbox), GFP_KERNEL);
 	if (!smbox)
 		return -ENOMEM;
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 468d4d5ab550..b1e11f85b805 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1479,7 +1479,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
 
 	init_completion(&__scm->waitq_comp);
 
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq < 0) {
 		if (irq != -ENXIO)
 			return irq;
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 23ce2f78c4ed..26efe12012a0 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -191,9 +191,9 @@ static const struct llcc_slice_config sc8280xp_data[] = {
 	{ LLCC_CVP,      28, 512,  3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
 	{ LLCC_APTCM,    30, 1024, 3, 1, 0x0,   0x1, 1, 0, 0, 1, 0, 0 },
 	{ LLCC_WRCACHE,  31, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
-	{ LLCC_CVPFW,    32, 512,  1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
-	{ LLCC_CPUSS1,   33, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
-	{ LLCC_CPUHWT,   36, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+	{ LLCC_CVPFW,    17, 512,  1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_CPUSS1,   3, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_CPUHWT,   5, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
 };
 
 static const struct llcc_slice_config sdm845_data[] =  {
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 2d3ee22b9249..538fa182169a 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -176,7 +176,8 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 	struct reserved_mem *rmem;
 	struct qcom_rmtfs_mem *rmtfs_mem;
 	u32 client_id;
-	u32 num_vmids, vmid[NUM_MAX_VMIDS];
+	u32 vmid[NUM_MAX_VMIDS];
+	int num_vmids;
 	int ret, i;
 
 	rmem = of_reserved_mem_lookup(node);
@@ -228,8 +229,11 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 	}
 
 	num_vmids = of_property_count_u32_elems(node, "qcom,vmid");
-	if (num_vmids < 0) {
-		dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", ret);
+	if (num_vmids == -EINVAL) {
+		/* qcom,vmid is optional */
+		num_vmids = 0;
+	} else if (num_vmids < 0) {
+		dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", num_vmids);
 		goto remove_cdev;
 	} else if (num_vmids > NUM_MAX_VMIDS) {
 		dev_warn(&pdev->dev,
diff --git a/drivers/tee/amdtee/core.c b/drivers/tee/amdtee/core.c
index 297dc62bca29..372d64756ed6 100644
--- a/drivers/tee/amdtee/core.c
+++ b/drivers/tee/amdtee/core.c
@@ -267,35 +267,34 @@ int amdtee_open_session(struct tee_context *ctx,
 		goto out;
 	}
 
+	/* Open session with loaded TA */
+	handle_open_session(arg, &session_info, param);
+	if (arg->ret != TEEC_SUCCESS) {
+		pr_err("open_session failed %d\n", arg->ret);
+		handle_unload_ta(ta_handle);
+		kref_put(&sess->refcount, destroy_session);
+		goto out;
+	}
+
 	/* Find an empty session index for the given TA */
 	spin_lock(&sess->lock);
 	i = find_first_zero_bit(sess->sess_mask, TEE_NUM_SESSIONS);
-	if (i < TEE_NUM_SESSIONS)
+	if (i < TEE_NUM_SESSIONS) {
+		sess->session_info[i] = session_info;
+		set_session_id(ta_handle, i, &arg->session);
 		set_bit(i, sess->sess_mask);
+	}
 	spin_unlock(&sess->lock);
 
 	if (i >= TEE_NUM_SESSIONS) {
 		pr_err("reached maximum session count %d\n", TEE_NUM_SESSIONS);
+		handle_close_session(ta_handle, session_info);
 		handle_unload_ta(ta_handle);
 		kref_put(&sess->refcount, destroy_session);
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	/* Open session with loaded TA */
-	handle_open_session(arg, &session_info, param);
-	if (arg->ret != TEEC_SUCCESS) {
-		pr_err("open_session failed %d\n", arg->ret);
-		spin_lock(&sess->lock);
-		clear_bit(i, sess->sess_mask);
-		spin_unlock(&sess->lock);
-		handle_unload_ta(ta_handle);
-		kref_put(&sess->refcount, destroy_session);
-		goto out;
-	}
-
-	sess->session_info[i] = session_info;
-	set_session_id(ta_handle, i, &arg->session);
 out:
 	free_pages((u64)ta, get_order(ta_size));
 	return rc;