diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2022-09-29 15:33:15 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2023-01-16 09:26:05 +0100 |
| commit | 61b7f8920b176e3cb86c3b5e7c866261720a7917 (patch) | |
| tree | 5c02c69a09fdd701ceea6b3bf538b28cac989ad7 | |
| parent | 1027b4df8354c55a5ed538e391d4cf9c509b74a7 (diff) | |
ARM: s3c: remove all s3c24xx support
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
132 files changed, 7 insertions, 21305 deletions
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst index 8c636d4a061f..ae42fe886f0d 100644 --- a/Documentation/arm/index.rst +++ b/Documentation/arm/index.rst @@ -64,7 +64,6 @@ SoC-specific documents sunxi samsung/index - samsung-s3c24xx/index sunxi/clocks diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst deleted file mode 100644 index cd22697cf606..000000000000 --- a/Documentation/arm/samsung-s3c24xx/cpufreq.rst +++ /dev/null @@ -1,77 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0-only - -======================= -S3C24XX CPUfreq support -======================= - -Introduction ------------- - - The S3C24XX series support a number of power saving systems, such as - the ability to change the core, memory and peripheral operating - frequencies. The core control is exported via the CPUFreq driver - which has a number of different manual or automatic controls over the - rate the core is running at. - - There are two forms of the driver depending on the specific CPU and - how the clocks are arranged. The first implementation used as single - PLL to feed the ARM, memory and peripherals via a series of dividers - and muxes and this is the implementation that is documented here. A - newer version where there is a separate PLL and clock divider for the - ARM core is available as a separate driver. - - -Layout ------- - - The code core manages the CPU specific drivers, any data that they - need to register and the interface to the generic drivers/cpufreq - system. Each CPU registers a driver to control the PLL, clock dividers - and anything else associated with it. Any board that wants to use this - framework needs to supply at least basic details of what is required. - - The core registers with drivers/cpufreq at init time if all the data - necessary has been supplied. - - -CPU support ------------ - - The support for each CPU depends on the facilities provided by the - SoC and the driver as each device has different PLL and clock chains - associated with it. - - -Slow Mode ---------- - - The SLOW mode where the PLL is turned off altogether and the - system is fed by the external crystal input is currently not - supported. - - -sysfs ------ - - The core code exports extra information via sysfs in the directory - devices/system/cpu/cpu0/arch-freq. - - -Board Support -------------- - - Each board that wants to use the cpufreq code must register some basic - information with the core driver to provide information about what the - board requires and any restrictions being placed on it. - - The board needs to supply information about whether it needs the IO bank - timings changing, any maximum frequency limits and information about the - SDRAM refresh rate. - - - - -Document Author ---------------- - -Ben Dooks, Copyright 2009 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst deleted file mode 100644 index 7863c93652f8..000000000000 --- a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst +++ /dev/null @@ -1,59 +0,0 @@ -=================================== -Simtec Electronics EB2410ITX (BAST) -=================================== - - http://www.simtec.co.uk/products/EB2410ITX/ - -Introduction ------------- - - The EB2410ITX is a S3C2410 based development board with a variety of - peripherals and expansion connectors. This board is also known by - the shortened name of Bast. - - -Configuration -------------- - - To set the default configuration, use `make bast_defconfig` which - supports the commonly used features of this board. - - -Support -------- - - Official support information can be found on the Simtec Electronics - website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ - - Useful links: - - - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html - - - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html - - - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html - and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html - - -MTD ---- - - The NAND and NOR support has been merged from the linux-mtd project. - Any problems, see http://www.linux-mtd.infradead.org/ for more - information or up-to-date versions of linux-mtd. - - -IDE ---- - - Both onboard IDE ports are supported, however there is no support for - changing speed of devices, PIO Mode 4 capable drives should be used. - - -Maintainers ------------ - - This board is maintained by Simtec Electronics. - - -Copyright 2004 Ben Dooks, Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst deleted file mode 100644 index f4a8c800a457..000000000000 --- a/Documentation/arm/samsung-s3c24xx/gpio.rst +++ /dev/null @@ -1,172 +0,0 @@ -==================== -S3C24XX GPIO Control -==================== - -Introduction ------------- - - The s3c2410 kernel provides an interface to configure and - manipulate the state of the GPIO pins, and find out other - information about them. - - There are a number of conditions attached to the configuration - of the s3c2410 GPIO system, please read the Samsung provided - data-sheet/users manual to find out the complete list. - - See Documentation/arm/samsung/gpio.rst for the core implementation. - - -GPIOLIB -------- - - With the event of the GPIOLIB in drivers/gpio, support for some - of the GPIO functions such as reading and writing a pin will - be removed in favour of this common access method. - - Once all the extant drivers have been converted, the functions - listed below will be removed (they may be marked as __deprecated - in the near future). - - The following functions now either have a `s3c_` specific variant - or are merged into gpiolib. See the definitions in - arch/arm/mach-s3c/gpio-cfg.h: - - - s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output() - - s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input() - - s3c2410_gpio_getirq() gpio_to_irq() - - s3c2410_gpio_cfgpin() s3c_gpio_cfgpin() - - s3c2410_gpio_getcfg() s3c_gpio_getcfg() - - s3c2410_gpio_pullup() s3c_gpio_setpull() - - -GPIOLIB conversion ------------------- - -If you need to convert your board or driver to use gpiolib from the phased -out s3c2410 API, then here are some notes on the process. - -1) If your board is exclusively using an GPIO, say to control peripheral - power, then it will require to claim the gpio with gpio_request() before - it can use it. - - It is recommended to check the return value, with at least WARN_ON() - during initialisation. - -2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin() - as they have the same arguments, and can either take the pin specific - values, or the more generic special-function-number arguments. - -3) s3c2410_gpio_pullup() changes have the problem that while the - s3c2410_gpio_pullup(x, 1) can be easily translated to the - s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) - are not so easy. - - The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case - of some of the devices, a pull-down) and as such the new API distinguishes - between the UP and DOWN case. There is currently no 'just turn on' setting - which may be required if this becomes a problem. - -4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call - does not implicitly configure the relevant gpio to output. The gpio - direction should be changed before using gpio_set_value(). - -5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin - has been set to input. It is currently unknown what the behaviour is - when using gpio_get_value() on an output pin (s3c2410_gpio_getpin - would return the value the pin is supposed to be outputting). - -6) s3c2410_gpio_getirq() should be directly replaceable with the - gpio_to_irq() call. - -The s3c2410_gpio and `gpio_` calls have always operated on the same gpio -numberspace, so there is no problem with converting the gpio numbering -between the calls. - - -Headers -------- - - See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list - of GPIO pins, and the configuration values for them. This - is included by using #include <mach/regs-gpio.h> - - -PIN Numbers ------------ - - Each pin has an unique number associated with it in regs-gpio.h, - e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell - the GPIO functions which pin is to be used. - - With the conversion to gpiolib, there is no longer a direct conversion - from gpio pin number to register base address as in earlier kernels. This - is due to the number space required for newer SoCs where the later - GPIOs are not contiguous. - - -Configuring a pin ------------------ - - The following function allows the configuration of a given pin to - be changed. - - void s3c_gpio_cfgpin(unsigned int pin, unsigned int function); - - e.g.: - - s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1)); - s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2)); - - which would turn GPA(0) into the lowest Address line A0, and set - GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. - - -Reading the current configuration ---------------------------------- - - The current configuration of a pin can be read by using standard - gpiolib function: - - s3c_gpio_getcfg(unsigned int pin); - - The return value will be from the same set of values which can be - passed to s3c_gpio_cfgpin(). - - -Configuring a pull-up resistor ------------------------------- - - A large proportion of the GPIO pins on the S3C2410 can have weak - pull-up resistors enabled. This can be configured by the following - function: - - void s3c_gpio_setpull(unsigned int pin, unsigned int to); - - Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off, - and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other - values are currently undefined. - - -Getting and setting the state of a PIN --------------------------------------- - - These calls are now implemented by the relevant gpiolib calls, convert - your board or driver to use gpiolib. - - -Getting the IRQ number associated with a PIN --------------------------------------------- - - A standard gpiolib function can map the given pin number to an IRQ - number to pass to the IRQ system. - - int gpio_to_irq(unsigned int pin); - - Note, not all pins have an IRQ. - - -Author -------- - -Ben Dooks, 03 October 2004 -Copyright 2004 Ben Dooks, Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst deleted file mode 100644 index 62a562c178e3..000000000000 --- a/Documentation/arm/samsung-s3c24xx/h1940.rst +++ /dev/null @@ -1,41 +0,0 @@ -============= -HP IPAQ H1940 -============= - -http://www.handhelds.org/projects/h1940.html - -Introduction ------------- - - The HP H1940 is a S3C2410 based handheld device, with - bluetooth connectivity. - - -Support -------- - - A variety of information is available - - handhelds.org project page: - - http://www.handhelds.org/projects/h1940.html - - handhelds.org wiki page: - - http://handhelds.org/moin/moin.cgi/HpIpaqH1940 - - Herbert Pötzl pages: - - http://vserver.13thfloor.at/H1940/ - - -Maintainers ------------ - - This project is being maintained and developed by a variety - of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl. - - Thanks to the many others who have also provided support. - - -(c) 2005 Ben Dooks diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst deleted file mode 100644 index ccb951a0bedb..000000000000 --- a/Documentation/arm/samsung-s3c24xx/index.rst +++ /dev/null @@ -1,20 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -========================== -Samsung S3C24XX SoC Family -========================== - -.. toctree:: - :maxdepth: 1 - - h1940 - gpio - cpufreq - suspend - usb-host - s3c2412 - eb2410itx - nand - smdk2440 - s3c2413 - overview diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst deleted file mode 100644 index 938995694ee7..000000000000 --- a/Documentation/arm/samsung-s3c24xx/nand.rst +++ /dev/null @@ -1,30 +0,0 @@ -==================== -S3C24XX NAND Support -==================== - -Introduction ------------- - -Small Page NAND ---------------- - -The driver uses a 512 byte (1 page) ECC code for this setup. The -ECC code is not directly compatible with the default kernel ECC -code, so the driver enforces its own OOB layout and ECC parameters - -Large Page NAND ---------------- - -The driver is capable of handling NAND flash with a 2KiB page -size, with support for hardware ECC generation and correction. - -Unlike the 512byte page mode, the driver generates ECC data for -each 256 byte block in an 2KiB page. This means that more than -one error in a page can be rectified. It also means that the -OOB layout remains the default kernel layout for these flashes. - - -Document Author ---------------- - -Ben Dooks, Copyright 2007 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst deleted file mode 100644 index 14535e5cffb7..000000000000 --- a/Documentation/arm/samsung-s3c24xx/overview.rst +++ /dev/null @@ -1,311 +0,0 @@ -========================== -S3C24XX ARM Linux Overview -========================== - - - -Introduction ------------- - - The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported - by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, - S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices - are supported. - - Support for the S3C2400 and S3C24A0 series was never completed and the - corresponding code has been removed after a while. If someone wishes to - revive this effort, partial support can be retrieved from earlier Linux - versions. - - The S3C2416 and S3C2450 devices are very similar and S3C2450 support is - included under the arch/arm/mach-s3c directory. Note, while core - support for these SoCs is in, work on some of the extra peripherals - and extra interrupts is still ongoing. - - -Configuration -------------- - - A generic S3C2410 configuration is provided, and can be used as the - default by `make s3c2410_defconfig`. This configuration has support - for all the machines, and the commonly used features on them. - - Certain machines may have their own default configurations as well, - please check the machine specific documentation. - - -Layout ------- - - The core support files, register, kernel and paltform data are located in the - platform code contained in arch/arm/mach-s3c with headers in - arch/arm/mach-s3c/include - -arch/arm/mach-s3c: - - Files in here are either common to all the s3c24xx family, - or are common to only some of them with names to indicate this - status. The files that are not common to all are generally named - with the initial cpu they support in the series to ensure a short - name without any possibility of confusion with newer devices. - - As an example, initially s3c244x would cover s3c2440 and s3c2442, but - with the s3c2443 which does not share many of the same drivers in - this directory, the name becomes invalid. We stick to s3c2440-<x> - to indicate a driver that is s3c2440 and s3c2442 compatible. - - This does mean that to find the status of any given SoC, a number - of directories may need to be searched. - - -Machines --------- - - The currently supported machines are as follows: - - Simtec Electronics EB2410ITX (BAST) - - A general purpose development board, see EB2410ITX.txt for further - details - - Simtec Electronics IM2440D20 (Osiris) - - CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash - and a PCMCIA controller. - - Samsung SMDK2410 - - Samsung's own development board, geared for PDA work. - - Samsung/Aiji SMDK2412 - - The S3C2412 version of the SMDK2440. - - Samsung/Aiji SMDK2413 - - The S3C2412 version of the SMDK2440. - - Samsung/Meritech SMDK2440 - - The S3C2440 compatible version of the SMDK2440, which has the - option of an S3C2440 or S3C2442 CPU module. - - Thorcom VR1000 - - Custom embedded board - - HP IPAQ 1940 - - Handheld (IPAQ), available in several varieties - - HP iPAQ rx3715 - - S3C2440 based IPAQ, with a number of variations depending on - features shipped. - - Acer N30 - - A S3C2410 based PDA from Acer. There is a Wiki page at - http://handhelds.org/moin/moin.cgi/AcerN30Documentation . - - AML M5900 - - American Microsystems' M5900 - - Nex Vision Nexcoder - Nex Vision Otom - - Two machines by Nex Vision - - -Adding New Machines -------------------- - - The architecture has been designed to support as many machines as can - be configured for it in one kernel build, and any future additions - should keep this in mind before altering items outside of their own - machine files. - - Machine definitions should be kept in arch/arm/mach-s3c, - and there are a number of examples that can be looked at. - - Read the kernel patch submission policies as well as the - Documentation/arm directory before submitting patches. The - ARM kernel series is managed by Russell King, and has a patch system - located at http://www.arm.linux.org.uk/developer/patches/ - as well as mailing lists that can be found from the same site. - - As a courtesy, please notify <ben-linux@fluff.org> of any new - machines or other modifications. - - Any large scale modifications, or new drivers should be discussed - on the ARM kernel mailing list (linux-arm-kernel) before being - attempted. See http://www.arm.linux.org.uk/mailinglists/ for the - mailing list information. - - -I2C ---- - - The hardware I2C core in the CPU is supported in single master - mode, and can be configured via platform data. - - -RTC ---- - - Support for the onboard RTC unit, including alarm function. - - This has recently been upgraded to use the new RTC core, - and the module has been renamed to rtc-s3c to fit in with - the new rtc naming scheme. - - -Watchdog --------- - - The onchip watchdog is available via the standard watchdog - interface. - - -NAND ----- - - The current kernels now have support for the s3c2410 NAND - controller. If there are any problems the latest linux-mtd - code can be found from http://www.linux-mtd.infradead.org/ - - For more information see Documentation/arm/samsung-s3c24xx/nand.rst - - -SD/MMC ------- - - The SD/MMC hardware pre S3C2443 is supported in the current - kernel, the driver is drivers/mmc/host/s3cmci.c and supports - 1 and 4 bit SD or MMC cards. - - The SDIO behaviour of this driver has not been fully tested. There is no - current support for hardware SDIO interrupts. - - -Serial ------- - - The s3c2410 serial driver provides support for the internal - serial ports. These devices appear as /dev/ttySAC0 through 3. - - To create device nodes for these, use the following commands - - mknod ttySAC0 c 204 64 - mknod ttySAC1 c 204 65 - mknod ttySAC2 c 204 66 - - -GPIO ----- - - The core contains support for manipulating the GPIO, see the - documentation in GPIO.txt in the same directory as this file. - - Newer kernels carry GPIOLIB, and support is being moved towards - this with some of the older support in line to be removed. - - As of v2.6.34, the move towards using gpiolib support is almost - complete, and very little of the old calls are left. - - See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific - support and Documentation/arm/samsung/gpio.rst for the core Samsung - implementation. - - -Clock Management ----------------- - - The core provides the interface defined in the header file - include/asm-arm/hardware/clock.h, to allow control over the - various clock units - - -Suspend to RAM --------------- - - For boards that provide support for suspend to RAM, the - system can be placed into low power suspend. - - See Suspend.txt for more information. - - -SPI ---- - - SPI drivers are available for both the in-built hardware - (although there is no DMA support yet) and a generic - GPIO based solution. - - -LEDs ----- - - There is support for GPIO based LEDs via a platform driver - in the LED subsystem. - - -Platform Data -------------- - - Whenever a device has platform specific data that is specified - on a per-machine basis, care should be taken to ensure the - following: - - 1) that default data is not left in the device to confuse the - driver if a machine does not set it at startup - - 2) the data should (if possible) be marked as __initdata, - to ensure that the data is thrown away if the machine is - not the one currently in use. - - The best way of doing this is to make a function that - kmalloc()s an area of memory, and copies the __initdata - and then sets the relevant device's platform data. Making - the function `__init` takes care of ensuring it is discarded - with the rest of the initialisation code:: - - static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd) - { - struct s3c2410_xxx_mach_info *npd; - - npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info)); - s3c_device_xxx.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for xxx platform data\n"); - } - } - - Note, since the code is marked as __init, it should not be - exported outside arch/arm/mach-s3c/, or exported to - modules via EXPORT_SYMBOL() and related functions. - - -Port Contributors ------------------ - - Ben Dooks (BJD) - Vincent Sanders - Herbert Potzl - Arnaud Patard (RTP) - Roc Wu - Klaus Fetscher - Dimitry Andric - Shannon Holland - Guillaume Gourat (NexVision) - Christer Weinigel (wingel) (Acer N30) - Lucas Correia Villa Real (S3C2400 port) - - -Document Author ---------------- - -Ben Dooks, Copyright 2004-2006 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst deleted file mode 100644 index 68b985fc6bf4..000000000000 --- a/Documentation/arm/samsung-s3c24xx/s3c2412.rst +++ /dev/null @@ -1,121 +0,0 @@ -========================== -S3C2412 ARM Linux Overview -========================== - -Introduction ------------- - - The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs - from Samsung. This part has an ARM926-EJS core, capable of running up - to 266MHz (see data-sheet for more information) - - -Clock ------ - - The core clock code provides a set of clocks to the drivers, and allows - for source selection and a number of other features. - - -Power ------ - - No support for suspend/resume to RAM in the current system. - - -DMA ---- - - No current support for DMA. - - -GPIO ----- - - There is support for setting the GPIO to input/output/special function - and reading or writing to them. - - -UART ----- - - The UART hardware is similar to the S3C2440, and is supported by the - s3c2410 driver in the drivers/serial directory. - - -NAND ----- - - The NAND hardware is similar to the S3C2440, and is supported by the - s3c2410 driver in the drivers/mtd/nand/raw directory. - - -USB Host --------- - - The USB hardware is similar to the S3C2410, with extended clock source - control. The OHCI portion is supported by the ohci-s3c2410 driver, and - the clock control selection is supported by the core clock code. - - -USB Device ----------- - - No current support in the kernel - - -IRQs ----- - - All the standard, and external interrupt sources are supported. The - extra sub-sources are not yet supported. - - -RTC ---- - - The RTC hardware is similar to the S3C2410, and is supported by the - s3c2410-rtc driver. - - -Watchdog --------- - - The watchdog hardware is the same as the S3C2410, and is supported by - the s3c2410_wdt driver. - - -MMC/SD/SDIO ------------ - - No current support for the MMC/SD/SDIO block. - -IIC ---- - - The IIC hardware is the same as the S3C2410, and is supported by the - i2c-s3c24xx driver. - - -IIS ---- - - No current support for the IIS interface. - - -SPI ---- - - No current support for the SPI interfaces. - - -ATA ---- - - No current support for the on-board ATA block. - - -Document Author ---------------- - -Ben Dooks, Copyright 2006 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst deleted file mode 100644 index 1f51e207fc46..000000000000 --- a/Documentation/arm/samsung-s3c24xx/s3c2413.rst +++ /dev/null @@ -1,22 +0,0 @@ -========================== -S3C2413 ARM Linux Overview -========================== - -Introduction ------------- - - The S3C2413 is an extended version of the S3C2412, with an camera - interface and mobile DDR memory support. See the S3C2412 support - documentation for more information. - - -Camera Interface ----------------- - - This block is currently not supported. - - -Document Author ---------------- - -Ben Dooks, Copyright 2006 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst deleted file mode 100644 index 524fd0b4afaf..000000000000 --- a/Documentation/arm/samsung-s3c24xx/smdk2440.rst +++ /dev/null @@ -1,57 +0,0 @@ -========================= -Samsung/Meritech SMDK2440 -========================= - -Introduction ------------- - - The SMDK2440 is a two part evaluation board for the Samsung S3C2440 - processor. It includes support for LCD, SmartMedia, Audio, SD and - 10MBit Ethernet, and expansion headers for various signals, including - the camera and unused GPIO. - - -Configuration -------------- - - To set the default configuration, use `make smdk2440_defconfig` which - will configure the common features of this board, or use - `make s3c2410_config` to include support for all s3c2410/s3c2440 machines - - -Support -------- - - Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which - includes linux based USB download tools. - - Some of the h1940 patches that can be found from the H1940 project - site at http://www.handhelds.org/projects/h1940.html can also be - applied to this board. - - -Peripherals ------------ - - There is no current support for any of the extra peripherals on the - base-board itself. - - -MTD ---- - - The NAND flash should be supported by the in kernel MTD NAND support, - NOR flash will be added later. - - -Maintainers ------------ - - This board is being maintained by Ben Dooks, for more info, see - http://www.fluff.org/ben/smdk2440/ - - Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440, - and to Simtec Electronics for allowing me time to work on this. - - -(c) 2004 Ben Dooks diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst deleted file mode 100644 index b4f3ae9fe76e..000000000000 --- a/Documentation/arm/samsung-s3c24xx/suspend.rst +++ /dev/null @@ -1,137 +0,0 @@ -======================= -S3C24XX Suspend Support -======================= - - -Introduction ------------- - - The S3C24XX supports a low-power suspend mode, where the SDRAM is kept - in Self-Refresh mode, and all but the essential peripheral blocks are - powered down. For more information on how this works, please look - at the relevant CPU datasheet from Samsung. - - -Requirements ------------- - - 1) A bootloader that can support the necessary resume operation - - 2) Support for at least 1 source for resume - - 3) CONFIG_PM enabled in the kernel - - 4) Any peripherals that are going to be powered down at the same - time require suspend/resume support. - - -Resuming --------- - - The S3C2410 user manual defines the process of sending the CPU to - sleep and how it resumes. The default behaviour of the Linux code - is to set the GSTATUS3 register to the physical address of the - code to resume Linux operation. - - GSTATUS4 is currently left alone by the sleep code, and is free to - use for any other purposes (for example, the EB2410ITX uses this to - save memory configuration in). - - -Machine Support ---------------- - - The machine specific functions must call the s3c_pm_init() function - to say that its bootloader is capable of resuming. This can be as - simple as adding the following to the machine's definition: - - INITMACHINE(s3c_pm_init) - - A board can do its own setup before calling s3c_pm_init, if it - needs to setup anything else for power management support. - - There is currently no support for over-riding the default method of - saving the resume address, if your board requires it, then contact - the maintainer and discuss what is required. - - Note, the original method of adding an late_initcall() is wrong, - and will end up initialising all compiled machines' pm init! - - The following is an example of code used for testing wakeup from - an falling edge on IRQ_EINT0:: - - - static irqreturn_t button_irq(int irq, void *pw) - { - return IRQ_HANDLED; - } - - statuc void __init machine_init(void) - { - ... - - request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING, - "button-irq-eint0", NULL); - - enable_irq_wake(IRQ_EINT0); - - s3c_pm_init(); - } - - -Debugging ---------- - - There are several important things to remember when using PM suspend: - - 1) The uart drivers will disable the clocks to the UART blocks when - suspending, which means that use of printascii() or similar direct - access to the UARTs will cause the debug to stop. - - 2) While the pm code itself will attempt to re-enable the UART clocks, - care should be taken that any external clock sources that the UARTs - rely on are still enabled at that point. - - 3) If any debugging is placed in the resume path, then it must have the - relevant clocks and peripherals setup before use (ie, bootloader). - - For example, if you transmit a character from the UART, the baud - rate and uart controls must be setup beforehand. - - -Configuration -------------- - - The S3C2410 specific configuration in `System Type` defines various - aspects of how the S3C2410 suspend and resume support is configured - - `S3C2410 PM Suspend debug` - - This option prints messages to the serial console before and after - the actual suspend, giving detailed information on what is - happening - - - `S3C2410 PM Suspend Memory CRC` - - Allows the entire memory to be checksummed before and after the - suspend to see if there has been any corruption of the contents. - - Note, the time to calculate the CRC is dependent on the CPU speed - and the size of memory. For an 64Mbyte RAM area on an 200MHz - S3C2410, this can take approximately 4 seconds to complete. - - This support requires the CRC32 function to be enabled. - - - `S3C2410 PM Suspend CRC Chunksize (KiB)` - - Defines the size of memory each CRC chunk covers. A smaller value - will mean that the CRC data block will take more memory, but will - identify any faults with better precision - - -Document Author ---------------- - -Ben Dooks, Copyright 2004 Simtec Electronics diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst deleted file mode 100644 index 7aaffac89e04..000000000000 --- a/Documentation/arm/samsung-s3c24xx/usb-host.rst +++ /dev/null @@ -1,91 +0,0 @@ -======================== -S3C24XX USB Host support -======================== - - - -Introduction ------------- - - This document details the S3C2410/S3C2440 in-built OHCI USB host support. - -Configuration -------------- - - Enable at least the following kernel options: - - menuconfig:: - - Device Drivers ---> - USB support ---> - <*> Support for Host-side USB - <*> OHCI HCD support - - - .config: - - - CONFIG_USB - - CONFIG_USB_OHCI_HCD - - - Once these options are configured, the standard set of USB device - drivers can be configured and used. - - -Board Support -------------- - - The driver attaches to a platform device, which will need to be - added by the board specific support file in arch/arm/mach-s3c, - such as mach-bast.c or mach-smdk2410.c - - The platform device's platform_data field is only needed if the - board implements extra power control or over-current monitoring. - - The OHCI driver does not ensure the state of the S3C2410's MISCCTRL - register, so if both ports are to be used for the host, then it is - the board support file's responsibility to ensure that the second - port is configured to be connected to the OHCI core. - - -Platform Data -------------- - - See include/linux/platform_data/usb-ohci-s3c2410.h for the - descriptions of the platform device data. An implementation - can be found in arch/arm/mach-s3c/simtec-usb.c . - - The `struct s3c2410_hcd_info` contains a pair of functions - that get called to enable over-current detection, and to - control the port power status. - - The ports are numbered 0 and 1. - - power_control: - Called to enable or disable the power on the port. - - enable_oc: - Called to enable or disable the over-current monitoring. - This should claim or release the resources being used to - check the power condition on the port, such as an IRQ. - - report_oc: - The OHCI driver fills this field in for the over-current code - to call when there is a change to the over-current state on - an port. The ports argument is a bitmask of 1 bit per port, - with bit X being 1 for an over-current on port X. - - The function s3c2410_usb_report_oc() has been provided to - ensure this is called correctly. - - port[x]: - This is struct describes each port, 0 or 1. The platform driver - should set the flags field of each port to S3C_HCDFLG_USED if - the port is enabled. - - - -Document Author ---------------- - -Ben Dooks, Copyright 2005 Simtec Electronics diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst index f6e27b07c993..27fae0d50361 100644 --- a/Documentation/arm/samsung/gpio.rst +++ b/Documentation/arm/samsung/gpio.rst @@ -9,14 +9,6 @@ This outlines the Samsung GPIO implementation and the architecture specific calls provided alongside the drivers/gpio core. -S3C24XX (Legacy) ----------------- - -See Documentation/arm/samsung-s3c24xx/gpio.rst for more information -about these devices. Their implementation has been brought into line -with the core samsung implementation described in this document. - - GPIOLIB integration ------------------- diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst index e74307897416..8b15a190169b 100644 --- a/Documentation/arm/samsung/overview.rst +++ b/Documentation/arm/samsung/overview.rst @@ -12,21 +12,10 @@ Introduction The currently supported SoCs are: - - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list - S3C64XX: S3C6400 and S3C6410 - S5PC110 / S5PV210 -S3C24XX Systems ---------------- - - There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which - deals with the architecture and drivers specific to these devices. - - See Documentation/arm/samsung-s3c24xx/overview.rst for more information - on the implementation details and specific support. - - Configuration ------------- @@ -51,8 +40,6 @@ Layout specific information. It contains the base clock, GPIO and device definitions to get the system running. - plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. - plat-s5p is for s5p specific builds, and contains common support for the S5P specific systems. Not all S5Ps use all the features in this directory due to differences in the hardware. diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt deleted file mode 100644 index 2632d3f13004..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Samsung S3C2410 Clock Controller - -The S3C2410 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to the s3c2410, -s3c2440 and s3c2442 SoCs in the s3c24x family. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. - - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. - - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2410.h header and can be used in device -tree sources. - -External clocks: - -The xti clock used as input for the plls is generated outside the SoC. It is -expected that is are defined using standard clock bindings with a -clock-output-names value of "xti". - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2410-clock"; - reg = <0x4c000000 0x20>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2440-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt deleted file mode 100644 index 21a8c23e658f..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Samsung S3C2412 Clock Controller - -The S3C2412 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to the s3c2412 -and s3c2413 SoCs in the s3c24x family. - -Required Properties: - -- compatible: should be "samsung,s3c2412-clock" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2412.h header and can be used in device -tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xti" - crystal input - required, - - "ext" - external clock source - optional, - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2412-clock"; - reg = <0x4c000000 0x20>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2412-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt deleted file mode 100644 index 985c0f574e9a..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Samsung S3C2443 Clock Controller - -The S3C2443 clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to all SoCs in -the s3c24x family starting with the s3c2443. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. - - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. - - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular SoC. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s3c2443.h header and can be used in device -tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xti" - crystal input - required, - - "ext" - external clock source - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_uart" - external uart clock - optional, - -Example: Clock controller node: - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2416-clock"; - reg = <0x4c000000 0x40>; - #clock-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - serial@50004000 { - compatible = "samsung,s3c2440-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt deleted file mode 100644 index c54c5a9a2a90..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt +++ /dev/null @@ -1,53 +0,0 @@ -Samsung S3C24XX Interrupt Controllers - -The S3C24XX SoCs contain a custom set of interrupt controllers providing a -varying number of interrupt sources. The set consists of a main- and sub- -controller and on newer SoCs even a second main controller. - -Required properties: -- compatible: Compatible property value should be "samsung,s3c2410-irq" - for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. - -- reg: Physical base address of the controller and length of memory mapped - region. - -- interrupt-controller : Identifies the node as an interrupt controller - -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 4 and interrupt descriptor shall - have the following format: - <ctrl_num parent_irq ctrl_irq type> - - ctrl_num contains the controller to use: - - 0 ... main controller - - 1 ... sub controller - - 2 ... second main controller on s3c2416 and s3c2450 - parent_irq contains the parent bit in the main controller and will be - ignored in main controllers - ctrl_irq contains the interrupt bit of the controller - type contains the trigger type to use - -Example: - - interrupt-controller@4a000000 { - compatible = "samsung,s3c2410-irq"; - reg = <0x4a000000 0x100>; - interrupt-controller; - #interrupt-cells=<4>; - }; - - [...] - - serial@50000000 { - compatible = "samsung,s3c2410-uart"; - reg = <0x50000000 0x4000>; - interrupt-parent = <&subintc>; - interrupts = <1 28 0 4>, <1 28 1 4>; - }; - - rtc@57000000 { - compatible = "samsung,s3c2410-rtc"; - reg = <0x57000000 0x100>; - interrupt-parent = <&intc>; - interrupts = <0 30 0 3>, <0 8 0 3>; - }; diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt deleted file mode 100644 index 5f68feb9f9d6..000000000000 --- a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings - -Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface -with external MMC, SD and SDIO storage mediums. - -This file documents differences between the core mmc properties described by -mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller -implementation. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 - - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 - - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 -- reg: register location and length -- interrupts: mmc controller interrupt -- clocks: Should reference the controller clock -- clock-names: Should contain "sdi" - -Required Board Specific Properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- bus-width: number of data lines (see mmc.txt) -- cd-gpios: gpio for card detection (see mmc.txt) -- wp-gpios: gpio for write protection (see mmc.txt) - -Example: - - mmc0: mmc@5a000000 { - compatible = "samsung,s3c2440-sdi"; - pinctrl-names = "default"; - pinctrl-0 = <&sdi_pins>; - reg = <0x5a000000 0x100000>; - interrupts = <0 0 21 3>; - clocks = <&clocks PCLK_SDI>; - clock-names = "sdi"; - bus-width = <4>; - cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; - wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; - }; diff --git a/MAINTAINERS b/MAINTAINERS index c03be77e8060..5414b920f411 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2583,13 +2583,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm64/boot/dts/freescale/s32g*.dts* -ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT -L: openmoko-kernel@lists.openmoko.org (subscribers-only) -S: Orphan -W: http://wiki.openmoko.org/wiki/Neo_FreeRunner -F: arch/arm/mach-s3c/gta02.h -F: arch/arm/mach-s3c/mach-gta02.c - ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter <alex@digriz.org.uk> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2796,7 +2789,6 @@ F: include/linux/platform_data/*s3c* F: include/linux/serial_s3c.h F: include/linux/soc/samsung/ N: exynos -N: s3c2410 N: s3c64xx N: s5pv210 @@ -19042,14 +19034,6 @@ M: Simtec Linux Team <linux@simtec.co.uk> S: Supported W: http://www.simtec.co.uk/products/EB110ATX/ -SIMTEC EB2410ITX (BAST) -M: Simtec Linux Team <linux@simtec.co.uk> -S: Supported -W: http://www.simtec.co.uk/products/EB2410ITX/ -F: arch/arm/mach-s3c/bast-ide.c -F: arch/arm/mach-s3c/bast-irq.c -F: arch/arm/mach-s3c/mach-bast.c - SIOX M: Thorsten Scherer <t.scherer@eckelmann.de> M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7742b35fe23a..67d96a7ddf1b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -282,7 +282,6 @@ config PHYS_OFFSET default DRAM_BASE if !MMU default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC - default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 default 0 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 20312792340d..874551895181 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1006,7 +1006,6 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" @@ -1018,7 +1017,6 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" @@ -1030,7 +1028,6 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" @@ -1050,33 +1047,6 @@ choice their output to UART 3. The port must have been initialised by the boot-loader before use. - config DEBUG_S3C2410_UART0 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 0 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART1 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 1 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART2 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 2 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - config DEBUG_SA1100 depends on ARCH_SA1100 bool "Use SA1100 UARTs for low-level debug" @@ -1439,13 +1409,6 @@ config DEBUG_AT91_UART config DEBUG_EXYNOS_UART bool -config DEBUG_S3C2410_UART - bool - select DEBUG_S3C24XX_UART - -config DEBUG_S3C24XX_UART - bool - config DEBUG_S3C64XX_UART bool @@ -1453,8 +1416,7 @@ config DEBUG_S5PV210_UART bool config DEBUG_S3C_UART - depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \ - DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ DEBUG_EXYNOS_UART int default "0" if DEBUG_S3C_UART0 @@ -1555,7 +1517,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sti.S" if DEBUG_STIH41X_ASC2 default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 @@ -1638,12 +1600,6 @@ config DEBUG_UART_PHYS default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0x49020000 if DEBUG_OMAP3UART3 default 0x49042000 if DEBUG_OMAP3UART4 - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 @@ -1711,7 +1667,7 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ @@ -1748,15 +1704,9 @@ config DEBUG_UART_VIRT default 0xf6200000 if DEBUG_PXA_UART1 default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART @@ -1820,7 +1770,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8fc34ec5dd84..02d07a07174e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -152,8 +152,6 @@ CHECKFLAGS += -D__arm__ # during boot, and this offset is critical to the functioning of # kexec-tools. textofs-y := 0x00008000 -# We don't want the htc bootloader to corrupt kernel during resume -textofs-$(CONFIG_PM_H1940) := 0x00108000 # RTD1195 has Boot ROM at start of address space textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d08a3c450ce7..aee97fa75dd1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1163,8 +1163,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-speedy.dtb \ rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb -dtb-$(CONFIG_ARCH_S3C24XX) += \ - s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h deleted file mode 100644 index 76b6171ae149..000000000000 --- a/arch/arm/boot/dts/s3c2410-pinctrl.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Samsung S3C2410 DTS pinctrl constants - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Copyright (c) 2022 Linaro Ltd - * Author: Krzysztof Kozlowski <krzk@kernel.org> - */ - -#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ -#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ - -#define S3C2410_PIN_FUNC_INPUT 0 -#define S3C2410_PIN_FUNC_OUTPUT 1 -#define S3C2410_PIN_FUNC_2 2 -#define S3C2410_PIN_FUNC_3 3 - -#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi deleted file mode 100644 index 3268366bd8bc..000000000000 --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung S3C2416 pinctrl settings - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -#include "s3c2410-pinctrl.h" - -&pinctrl_0 { - /* - * Pin banks - */ - - gpa: gpa-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpb: gpb-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpc: gpc-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpd: gpd-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpe: gpe-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpf: gpf-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg: gpg-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gph: gph-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpj: gpj-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpk: gpk-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpl: gpl-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - gpm: gpm-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - }; - - /* - * Pin groups - */ - - uart0_data: uart0-data-pins { - samsung,pins = "gph-0", "gph-1"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart0_fctl: uart0-fctl-pins { - samsung,pins = "gph-8", "gph-9"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart1_data: uart1-data-pins { - samsung,pins = "gph-2", "gph-3"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart1_fctl: uart1-fctl-pins { - samsung,pins = "gph-10", "gph-11"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart2_data: uart2-data-pins { - samsung,pins = "gph-4", "gph-5"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart2_fctl: uart2-fctl-pins { - samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - uart3_data: uart3-data-pins { - samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - extuart_clk: extuart-clk-pins { - samsung,pins = "gph-12"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - i2c0_bus: i2c0-bus-pins { - samsung,pins = "gpe-14", "gpe-15"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - spi0_bus: spi0-bus-pins { - samsung,pins = "gpe-11", "gpe-12", "gpe-13"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd0_clk: sd0-clk-pins { - samsung,pins = "gpe-5"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd0_cmd: sd0-cmd-pins { - samsung,pins = "gpe-6"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd0_bus1: sd0-bus1-pins { - samsung,pins = "gpe-7"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd0_bus4: sd0-bus4-pins { - samsung,pins = "gpe-8", "gpe-9", "gpe-10"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd1_cmd: sd1-cmd-pins { - samsung,pins = "gpl-8"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd1_clk: sd1-clk-pins { - samsung,pins = "gpl-9"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd1_bus1: sd1-bus1-pins { - samsung,pins = "gpl-0"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; - - sd1_bus4: sd1-bus4-pins { - samsung,pins = "gpl-1", "gpl-2", "gpl-3"; - samsung,pin-function = <S3C2410_PIN_FUNC_2>; - }; -}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts deleted file mode 100644 index e7c379a9842e..000000000000 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung SMDK2416 board device tree source - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -/dts-v1/; -#include "s3c2416.dtsi" - -/ { - model = "SMDK2416"; - compatible = "samsung,smdk2416", "samsung,s3c2416"; - - memory@30000000 { - device_type = "memory"; - reg = <0x30000000 0x4000000>; - }; - - xti: clock-0 { - compatible = "fixed-clock"; - clock-frequency = <12000000>; - clock-output-names = "xti"; - #clock-cells = <0>; - }; -}; - -&rtc { - status = "okay"; -}; - -&sdhci_0 { - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, - <&sd1_bus1>, <&sd1_bus4>; - bus-width = <4>; - broken-cd; - status = "okay"; -}; - -&sdhci_1 { - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, - <&sd0_bus1>, <&sd0_bus4>; - bus-width = <4>; - cd-gpios = <&gpf 1 0>; - cd-inverted; - status = "okay"; -}; - -&uart_0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_data>, <&uart0_fctl>; -}; - -&uart_1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_data>, <&uart1_fctl>; -}; - -&uart_2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_data>; -}; - -&uart_3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_data>; -}; - -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi deleted file mode 100644 index 4660751cb207..000000000000 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's S3C2416 SoC device tree source - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -#include <dt-bindings/clock/s3c2443.h> -#include "s3c24xx.dtsi" -#include "s3c2416-pinctrl.dtsi" - -/ { - model = "Samsung S3C2416 SoC"; - compatible = "samsung,s3c2416"; - - aliases { - serial3 = &uart_3; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - reg = <0x0>; - }; - }; - - clocks: clock-controller@4c000000 { - compatible = "samsung,s3c2416-clock"; - reg = <0x4c000000 0x40>; - #clock-cells = <1>; - }; - - uart_3: serial@5000c000 { - compatible = "samsung,s3c2440-uart"; - reg = <0x5000C000 0x4000>; - interrupts = <1 18 24 4>, <1 18 25 4>; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, - <&clocks SCLK_UART>; - status = "disabled"; - }; - - sdhci_1: mmc@4ac00000 { - compatible = "samsung,s3c6410-sdhci"; - reg = <0x4AC00000 0x100>; - interrupts = <0 0 21 3>; - clock-names = "hsmmc", "mmc_busclk.0", - "mmc_busclk.2"; - clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, - <&clocks MUX_HSMMC0>; - status = "disabled"; - }; - - sdhci_0: mmc@4a800000 { - compatible = "samsung,s3c6410-sdhci"; - reg = <0x4A800000 0x100>; - interrupts = <0 0 20 3>; - clock-names = "hsmmc", "mmc_busclk.0", - "mmc_busclk.2"; - clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, - <&clocks MUX_HSMMC1>; - status = "disabled"; - }; -}; - -&i2c { - compatible = "samsung,s3c2440-i2c"; - clocks = <&clocks PCLK_I2C0>; - clock-names = "i2c"; -}; - -&intc { - compatible = "samsung,s3c2416-irq"; -}; - -&pinctrl_0 { - compatible = "samsung,s3c2416-pinctrl"; -}; - -&rtc { - compatible = "samsung,s3c2416-rtc"; - clocks = <&clocks PCLK_RTC>; - clock-names = "rtc"; -}; - -&timer { - clocks = <&clocks PCLK_PWM>; - clock-names = "timers"; -}; - -&uart_0 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; -}; - -&uart_1 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, - <&clocks SCLK_UART>; -}; - -&uart_2 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, - <&clocks SCLK_UART>; -}; - -&watchdog { - interrupts = <1 9 27 3>; - clocks = <&clocks PCLK_WDT>; - clock-names = "watchdog"; -}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi deleted file mode 100644 index 06f82c7e458e..000000000000 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's S3C24XX family device tree source - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -/ { - compatible = "samsung,s3c24xx"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - pinctrl0 = &pinctrl_0; - serial0 = &uart_0; - serial1 = &uart_1; - serial2 = &uart_2; - }; - - intc: interrupt-controller@4a000000 { - compatible = "samsung,s3c2410-irq"; - reg = <0x4a000000 0x100>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - pinctrl_0: pinctrl@56000000 { - reg = <0x56000000 0x1000>; - - wakeup-interrupt-controller { - compatible = "samsung,s3c2410-wakeup-eint"; - interrupts = <0 0 0 3>, - <0 0 1 3>, - <0 0 2 3>, - <0 0 3 3>, - <0 0 4 4>, - <0 0 5 4>; - }; - }; - - timer: pwm@51000000 { - compatible = "samsung,s3c2410-pwm"; - reg = <0x51000000 0x1000>; - interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; - #pwm-cells = <3>; - }; - - uart_0: serial@50000000 { - compatible = "samsung,s3c2410-uart"; - reg = <0x50000000 0x4000>; - interrupts = <1 28 0 4>, <1 28 1 4>; - status = "disabled"; - }; - - uart_1: serial@50004000 { - compatible = "samsung,s3c2410-uart"; - reg = <0x50004000 0x4000>; - interrupts = <1 23 3 4>, <1 23 4 4>; - status = "disabled"; - }; - - uart_2: serial@50008000 { - compatible = "samsung,s3c2410-uart"; - reg = <0x50008000 0x4000>; - interrupts = <1 15 6 4>, <1 15 7 4>; - status = "disabled"; - }; - - watchdog: watchdog@53000000 { - compatible = "samsung,s3c2410-wdt"; - reg = <0x53000000 0x100>; - interrupts = <0 0 9 3>; - status = "disabled"; - }; - - rtc: rtc@57000000 { - compatible = "samsung,s3c2410-rtc"; - reg = <0x57000000 0x100>; - interrupts = <0 0 30 3>, <0 0 8 3>; - status = "disabled"; - }; - - i2c: i2c@54000000 { - compatible = "samsung,s3c2410-i2c"; - reg = <0x54000000 0x100>; - interrupts = <0 0 27 3>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; -}; diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig deleted file mode 100644 index 86e00f684e16..000000000000 --- a/arch/arm/configs/mini2440_defconfig +++ /dev/null @@ -1,338 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_ARCH_MULTI_V4T=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_S3C24XX=y -CONFIG_S3C_ADC=y -# CONFIG_CPU_S3C2410 is not set -CONFIG_CPU_S3C2440=y -CONFIG_MACH_MINI2440=y -CONFIG_AEABI=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_KEXEC=y -CONFIG_CPU_IDLE=y -CONFIG_APM_EMULATION=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_BINFMT_MISC=m -# CONFIG_COMPAT_BRK is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_DIAG=m -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_NET_PKTGEN=m -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_CONNECTOR=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_INFTL=y -CONFIG_RFD_FTL=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_RAM=y -CONFIG_MTD_ROM=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_S3C2410=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_LPDDR=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=m -CONFIG_SENSORS_TSL2550=m -CONFIG_EEPROM_AT24=y -CONFIG_SCSI=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_SG=m -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_DM9000=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_ZD1211RW=m -CONFIG_ZD1211RW_DEBUG=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=m -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIO_RAW=y -CONFIG_LEGACY_PTY_COUNT=128 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_DEV_BUS=m -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_S3C2410=y -CONFIG_I2C_SIMTEC=y -CONFIG_SPI=y -CONFIG_SPI_S3C24XX=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIO_SYSFS=y -CONFIG_SENSORS_LM75=y -CONFIG_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_S3C2410_WATCHDOG=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_S3C2410=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_SOC=y -CONFIG_HIDRAW=y -CONFIG_HID_GYRATION=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_WDM=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_GADGET=y -CONFIG_USB_S3C2410=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SPI=y -CONFIG_MMC_S3C=y -CONFIG_LEDS_S3C24XX=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_S3C=y -CONFIG_DMADEVICES=y -CONFIG_S3C24XX_DMAC=y -CONFIG_PWM=y -CONFIG_PWM_SAMSUNG=y -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_LIBCRC32C=m -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_MINI_4x6=y -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig deleted file mode 100644 index 41b40863a78e..000000000000 --- a/arch/arm/configs/s3c2410_defconfig +++ /dev/null @@ -1,437 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_ARCH_MULTI_V4T=y -CONFIG_ARCH_MULTI_V5=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_S3C24XX=y -CONFIG_S3C_ADC=y -CONFIG_CPU_S3C2412=y -CONFIG_CPU_S3C2416=y -CONFIG_CPU_S3C2440=y -CONFIG_CPU_S3C2442=y -CONFIG_CPU_S3C2443=y -CONFIG_MACH_AML_M5900=y -CONFIG_ARCH_BAST=y -CONFIG_ARCH_H1940=y -CONFIG_MACH_N30=y -CONFIG_MACH_OTOM=y -CONFIG_MACH_QT2410=y -CONFIG_ARCH_SMDK2410=y -CONFIG_MACH_TCT_HAMMER=y -CONFIG_MACH_VR1000=y -CONFIG_MACH_JIVE=y -CONFIG_MACH_SMDK2412=y -CONFIG_MACH_VSTMS=y -CONFIG_MACH_SMDK2416=y -CONFIG_MACH_ANUBIS=y -CONFIG_MACH_AT2440EVB=y -CONFIG_MACH_MINI2440=y -CONFIG_MACH_NEXCODER_2440=y -CONFIG_MACH_OSIRIS=y -CONFIG_MACH_OSIRIS_DVS=m -CONFIG_MACH_RX3715=y -CONFIG_ARCH_S3C2440=y -CONFIG_MACH_NEO1973_GTA02=y -CONFIG_MACH_RX1950=y -CONFIG_MACH_SMDK2443=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_APM_EMULATION=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_SLAB=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_VS=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_ROM=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_S3C2410=y -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_ATA_OVER_ETH=m -CONFIG_EEPROM_AT24=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_DM9000=y -CONFIG_INPUT_EVDEV=y -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_DEV_BUS=m -CONFIG_PRINTER=y -CONFIG_PPDEV=y -CONFIG_HW_RANDOM=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_S3C2410=y -CONFIG_I2C_SIMTEC=y -CONFIG_SPI=y -CONFIG_SPI_GPIO=m -CONFIG_SPI_S3C24XX=m -CONFIG_SPI_SPIDEV=m -CONFIG_SPI_TLE62X0=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM85=m -CONFIG_WATCHDOG=y -CONFIG_S3C2410_WATCHDOG=y -CONFIG_MFD_SM501=y -CONFIG_TPS65010=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_S3C2410=y -CONFIG_FB_SM501=y -CONFIG_BACKLIGHT_PWM=m -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_SOC=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=y -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_TEST=m -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SPI=m -CONFIG_MMC_S3C=y -CONFIG_LEDS_S3C24XX=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_PCA955X=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_S3C=y -CONFIG_DMADEVICES=y -CONFIG_S3C24XX_DMAC=y -CONFIG_PWM=y -CONFIG_PWM_SAMSUNG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CONFIGFS_FS=m -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_SQUASHFS=m -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig deleted file mode 100644 index 6bd38b6f22c4..000000000000 --- a/arch/arm/configs/tct_hammer_defconfig +++ /dev/null @@ -1,59 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_ELF_CORE is not set -# CONFIG_SHMEM is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_KALLSYMS is not set -CONFIG_ARCH_MULTI_V4T=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_S3C24XX=y -CONFIG_MACH_TCT_HAMMER=y -CONFIG_UNUSED_BOARD_FILES=y -CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" -CONFIG_FPE_NWFPE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_SWAP is not set -CONFIG_SLUB=y -CONFIG_SLUB_TINY=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=10240 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT_CONSOLE is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_USB_S3C2410=y -CONFIG_USB_ETH=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_PROC_SYSCTL is not set -CONFIG_JFFS2_FS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_CRC_CCITT=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig index a64143574546..809f84fca0b8 100644 --- a/arch/arm/mach-s3c/Kconfig +++ b/arch/arm/mach-s3c/Kconfig @@ -2,13 +2,10 @@ # # Copyright 2009 Simtec Electronics -source "arch/arm/mach-s3c/Kconfig.s3c24xx" source "arch/arm/mach-s3c/Kconfig.s3c64xx" config PLAT_SAMSUNG - bool - depends on PLAT_S3C24XX || ARCH_S3C64XX - default y + def_bool ARCH_S3C64XX select GENERIC_IRQ_CHIP select NO_IOPORT_MAP select SOC_SAMSUNG @@ -16,9 +13,8 @@ config PLAT_SAMSUNG Base platform code for all Samsung SoC based systems config SAMSUNG_PM - bool - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX) - default y + def_bool ARCH_S3C64XX + depends on PM help Base platform power management code for samsung code @@ -99,11 +95,6 @@ config S3C_DEV_HSMMC3 help Compile in platform device definitions for HSMMC channel 3 -config S3C_DEV_HWMON - bool - help - Compile in platform device definitions for HWMON - config S3C_DEV_I2C1 bool help @@ -156,7 +147,6 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C24XX help Compile in platform device definition for Watchdog Timer @@ -180,22 +170,12 @@ config SAMSUNG_DEV_ADC help Compile in platform device definition for ADC controller -config SAMSUNG_DEV_IDE - bool - help - Compile in platform device definitions for IDE - config S3C64XX_DEV_SPI0 bool help Compile in platform device definitions for S3C64XX's type SPI controller 0 -config SAMSUNG_DEV_TS - bool - help - Common in platform device definitions for touchscreen device - config SAMSUNG_DEV_KEYPAD bool help @@ -203,7 +183,6 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx deleted file mode 100644 index 7287e173f30e..000000000000 --- a/arch/arm/mach-s3c/Kconfig.s3c24xx +++ /dev/null @@ -1,604 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Copyright (c) 2012 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Copyright 2007 Simtec Electronics -menuconfig ARCH_S3C24XX - bool "Samsung S3C24XX SoCs (deprecated, see help)" - depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 - depends on CPU_LITTLE_ENDIAN - depends on ATAGS && UNUSED_BOARD_FILES - select CLKSRC_SAMSUNG_PWM - select GPIO_SAMSUNG - select GPIOLIB - select S3C2410_WATCHDOG - select SAMSUNG_ATAGS - select WATCHDOG - help - Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 - and S3C2450 SoCs based systems, such as the Simtec Electronics BAST - (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the - Samsung SMDK2410 development board (and derivatives). - - The platform is deprecated and scheduled for removal. Please reach to - the maintainers of the platform and linux-samsung-soc@vger.kernel.org if - you still use it. - Without such feedback, the platform will be removed after 2022. - -if ARCH_S3C24XX - -config PLAT_S3C24XX - def_bool y - select GPIOLIB - select NO_IOPORT_MAP - select S3C_DEV_NAND - select COMMON_CLK - help - Base platform code for any Samsung S3C24XX device - -menu "Samsung S3C24XX SoCs Support" - -comment "S3C24XX SoCs" - -config CPU_S3C2410 - bool "Samsung S3C2410" - depends on ARCH_MULTI_V4T - default y - select CPU_ARM920T - select S3C2410_COMMON_CLK - select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ - select S3C2410_PM if PM - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -config CPU_S3C2412 - bool "Samsung S3C2412" - depends on ARCH_MULTI_V5 - select CPU_ARM926T - select S3C2412_COMMON_CLK - select S3C2412_PM if PM_SLEEP - help - Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line - -config CPU_S3C2416 - bool "Samsung S3C2416/S3C2450" - depends on ARCH_MULTI_V5 - select CPU_ARM926T - select S3C2416_PM if PM_SLEEP - select S3C2443_COMMON_CLK - help - Support for the S3C2416 SoC from the S3C24XX line - -config CPU_S3C2440 - bool "Samsung S3C2440" - depends on ARCH_MULTI_V4T - select CPU_ARM920T - select S3C2410_COMMON_CLK - select S3C2410_PM if PM_SLEEP - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool "Samsung S3C2442" - depends on ARCH_MULTI_V4T - select CPU_ARM920T - select S3C2410_COMMON_CLK - select S3C2410_PM if PM_SLEEP - help - Support for S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C244X - def_bool y - depends on CPU_S3C2440 || CPU_S3C2442 - -config CPU_S3C2443 - bool "Samsung S3C2443" - depends on ARCH_MULTI_V4T - select CPU_ARM920T - select S3C2443_COMMON_CLK - help - Support for the S3C2443 SoC from the S3C24XX line - -# common code - -config S3C24XX_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config S3C24XX_SIMTEC_AUDIO - bool - depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) - default y - help - Add audio devices for common Simtec S3C24XX boards - -config S3C24XX_SIMTEC_PM - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C24XX_SIMTEC_USB - bool - help - USB management code for common Simtec S3C24XX boards - -config S3C24XX_SETUP_TS - bool - help - Compile in platform device definition for Samsung TouchScreen. - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config S3C24XX_PLL - bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on ARM_S3C24XX_CPUFREQ - help - Compile in support for changing the PLL frequency from the - S3C24XX series CPUfreq driver. The PLL takes time to settle - after a frequency change, so by default it is not enabled. - - This also means that the PLL tables for the selected CPU(s) will - be built which may increase the size of the kernel image. - -# cpu frequency items common between s3c2410 and s3c2440/s3c2442 - -config S3C2410_IOTIMING - bool - depends on ARM_S3C24XX_CPUFREQ - help - Internal node to select io timing code that is common to the s3c2410 - and s3c2440/s3c2442 cpu frequency support. - -# cpu frequency support common to s3c2412, s3c2413 and s3c2442 - -config S3C2412_IOTIMING - bool - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) - help - Intel node to select io timing code that is common to the s3c2412 - and the s3c2443. - -# cpu-specific sections - -if CPU_S3C2410 - -config S3C2410_PLL - bool - depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL - default y - help - Select the PLL table for the S3C2410 - -config S3C24XX_SIMTEC_NOR - bool - help - Internal node to specify machine has simtec NOR mapping - -config MACH_BAST_IDE - bool - select HAVE_PATA_PLATFORM - help - Internal node for machines with an BAST style IDE - interface - -comment "S3C2410 Boards" - -# -# The "S3C2410 Boards" list is ordered alphabetically by option text. -# (without ARCH_ or MACH_) -# - -config MACH_AML_M5900 - bool "AML M5900 Series" - select S3C24XX_SIMTEC_PM if PM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the American Microsystems M5900 Series - <http://www.amltd.com> - -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select MACH_BAST_IDE - select S3C2410_COMMON_DCLK - select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_SIMTEC_NOR - select S3C24XX_SIMTEC_PM if PM - select S3C24XX_SIMTEC_USB - select S3C_DEV_HWMON - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) - -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) - -config ARCH_H1940 - bool "IPAQ H1940" - select PM_H1940 if PM - select S3C24XX_SETUP_TS - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the HP IPAQ H1940 - -config H1940BT - tristate "Control the state of H1940 bluetooth chip" - depends on ARCH_H1940 - depends on RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on h1940. - -config MACH_N30 - bool "Acer N30 family" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you want suppt for the Acer N30, Acer N35, - Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. - -config MACH_OTOM - bool "NexVision OTOM Board" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_QT2410 - bool "QT2410" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Armzone QT2410 - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" - select S3C24XX_SMDK - select S3C_DEV_USB_HOST - help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - <http://www.fsforth.de> - -config MACH_TCT_HAMMER - bool "TCT Hammer Board" - select S3C_DEV_USB_HOST - help - Say Y here if you are using the TinCanTools Hammer Board - <https://www.tincantools.com> - -config MACH_VR1000 - bool "Thorcom VR1000" - select MACH_BAST_IDE - select S3C2410_COMMON_DCLK - select S3C24XX_SIMTEC_NOR - select S3C24XX_SIMTEC_PM if PM - select S3C24XX_SIMTEC_USB - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Thorcom VR1000 board. - -endif # CPU_S3C2410 - -config S3C2412_PM_SLEEP - bool - help - Internal config node to apply sleep for S3C2412 power management. - Can be selected by another SoCs such as S3C2416 with similar - sleep procedure. - -if CPU_S3C2412 - -config CPU_S3C2412_ONLY - bool - depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ - !CPU_S3C2442 && !CPU_S3C2443 - default y - -config S3C2412_PM - bool - select S3C2412_PM_SLEEP - select SAMSUNG_WAKEMASK - help - Internal config node to apply S3C2412 power management - -comment "S3C2412 Boards" - -# -# The "S3C2412 Boards" list is ordered alphabetically by option text. -# (without ARCH_ or MACH_) -# - -config MACH_JIVE - bool "Logitech Jive" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Logitech Jive. - -config MACH_JIVE_SHOW_BOOTLOADER - bool "Allow access to bootloader partitions in MTD" - depends on MACH_JIVE - -config MACH_S3C2413 - bool - help - Internal node for S3C2413 version of SMDK2413, so that - machine_is_s3c2413() will work when MACH_SMDK2413 is - selected - -config MACH_SMDK2412 - bool "SMDK2412" - select MACH_SMDK2413 - help - Say Y here if you are using an SMDK2412 - - Note, this shares support with SMDK2413, so will automatically - select MACH_SMDK2413. - -config MACH_SMDK2413 - bool "SMDK2413" - select MACH_S3C2413 - select S3C24XX_SMDK - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using an SMDK2413 - -config MACH_VSTMS - bool "VMSTMS" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using an VSTMS board - -endif # CPU_S3C2412 - -if CPU_S3C2416 - -config S3C2416_PM - bool - select S3C2412_PM_SLEEP - select SAMSUNG_WAKEMASK - help - Internal config node to apply S3C2416 power management - -config S3C2416_SETUP_SDHCI - bool - select S3C2416_SETUP_SDHCI_GPIO - help - Internal helper functions for S3C2416 based SDHCI systems - -config S3C2416_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -comment "S3C2416 Boards" - -config MACH_SMDK2416 - bool "SMDK2416" - select S3C2416_SETUP_SDHCI - select S3C24XX_SMDK - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using an SMDK2416 - -config MACH_S3C2416_DT - bool "Samsung S3C2416 machine using devicetree" - select TIMER_OF - select USE_OF - select PINCTRL - select PINCTRL_S3C24XX - help - Machine support for Samsung S3C2416 machines with device tree enabled. - Select this if a fdt blob is available for the S3C2416 SoC based board. - Note: This is under development and not all peripherals can be supported - with this machine file. - -endif # CPU_S3C2416 - -if CPU_S3C2440 || CPU_S3C2442 - -config S3C2440_XTAL_12000000 - bool - help - Indicate that the build needs to support 12MHz system - crystal. - -config S3C2440_XTAL_16934400 - bool - help - Indicate that the build needs to support 16.9344MHz system - crystal. - -config S3C2440_PLL_12000000 - bool - depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if S3C24XX_PLL - help - PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. - -config S3C2440_PLL_16934400 - bool - depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if S3C24XX_PLL - help - PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. -endif # CPU_S3C2440 || CPU_S3C2442 - -if CPU_S3C2440 - -comment "S3C2440 Boards" - -# -# The "S3C2440 Boards" list is ordered alphabetically by option text. -# (without ARCH_ or MACH_) -# - -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select HAVE_PATA_PLATFORM - select S3C2410_COMMON_DCLK - select S3C2440_XTAL_12000000 - select S3C24XX_SIMTEC_PM if PM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec Electronics ANUBIS - development system - -config MACH_AT2440EVB - bool "Avantech AT2440EVB development board" - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the AT2440EVB development board - -config MACH_MINI2440 - bool "MINI2440 development board" - select LEDS_CLASS - select LEDS_TRIGGERS - select LEDS_TRIGGER_BACKLIGHT - select NEW_LEDS - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here to select support for the MINI2440. Is a 10cm x 10cm board - available via various sources. It can come with a 3.5" or 7" touch LCD. - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select S3C2440_XTAL_12000000 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_COMMON_DCLK - select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ - select S3C2440_XTAL_12000000 - select S3C24XX_SIMTEC_PM if PM - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. - -config MACH_OSIRIS_DVS - tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" - depends on MACH_OSIRIS - depends on TPS65010 - help - Say Y/M here if you want to have dynamic voltage scaling support - on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. - - The DVS driver alters the voltage supplied to the ARM core - depending on the frequency it is running at. The driver itself - does not do any of the frequency alteration, which is left up - to the cpufreq driver. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select PM_H1940 if PM - select S3C2440_XTAL_16934400 - select S3C_DEV_NAND - help - Say Y here if you are using the HP iPAQ rx3715. - -config ARCH_S3C2440 - bool "SMDK2440" - select S3C2440_XTAL_16934400 - select S3C24XX_SMDK - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - help - Say Y here if you are using the SMDK2440. - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - default y if ARCH_S3C2440 - select S3C2440_XTAL_16934400 - -endif # CPU_S3C2440 - -if CPU_S3C2442 - -comment "S3C2442 Boards" - -# -# The "S3C2442 Boards" list is ordered alphabetically by option text. -# (without ARCH_ or MACH_) -# - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select I2C - select MFD_PCF50633 - select PCF50633_GPIO - select POWER_SUPPLY - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -config MACH_RX1950 - bool "HP iPAQ rx1950" - select I2C - select PM_H1940 if PM - select S3C2410_COMMON_DCLK - select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ - select S3C2440_XTAL_16934400 - select S3C_DEV_NAND - help - Say Y here if you're using HP iPAQ rx1950 - -endif # CPU_S3C2442 - -if CPU_S3C2443 || CPU_S3C2416 - -config S3C2443_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations - -endif # CPU_S3C2443 || CPU_S3C2416 - -if CPU_S3C2443 - -comment "S3C2443 Boards" - -config MACH_SMDK2443 - bool "SMDK2443" - select S3C24XX_SMDK - select S3C_DEV_HSMMC1 - help - Say Y here if you are using an SMDK2443 - -endif # CPU_S3C2443 - -config PM_H1940 - bool - help - Internal node for H1940 and related PM - -endmenu # "Samsung S3C24XX SoCs Support" - -endif # ARCH_S3C24XX diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile index 7c7d3318fd61..e7f18039b149 100644 --- a/arch/arm/mach-s3c/Makefile +++ b/arch/arm/mach-s3c/Makefile @@ -2,10 +2,6 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C24XX -include $(src)/Makefile.s3c24xx -endif - ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx endif diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx deleted file mode 100644 index 3483ab3a2b81..000000000000 --- a/arch/arm/mach-s3c/Makefile.s3c24xx +++ /dev/null @@ -1,102 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Copyright (c) 2012 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Copyright 2007 Simtec Electronics - -# core - -obj-y += s3c24xx.o -obj-y += irq-s3c24xx.o -obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq.o -obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq-exports.o - -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o -obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o - -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o -obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o - -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o -obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o - -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o -obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o - -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o - -# PM - -obj-$(CONFIG_PM) += pm-s3c24xx.o -obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c24xx.o sleep-s3c24xx.o - -# common code - -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o - -obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o -obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o - -# -# machine support -# following is ordered alphabetically by option text. -# - -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o -obj-$(CONFIG_H1940BT) += h1940-bluetooth.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o -obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o - -obj-$(CONFIG_MACH_JIVE) += mach-jive.o -obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o -obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o - -obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o -obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o - -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o -obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o - -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o - -obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o - -# common bits of machine support - -obj-$(CONFIG_S3C24XX_SMDK) += common-smdk-s3c24xx.o -obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o -obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o -obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o -obj-$(CONFIG_S3C24XX_SIMTEC_USB) += simtec-usb.o - -# machine additions - -obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o -obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o - -# device setup - -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c24xx.o -obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi-s3c24xx.o -obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c-s3c24xx.o -obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts-s3c24xx.o diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h deleted file mode 100644 index 13847292e6c7..000000000000 --- a/arch/arm/mach-s3c/anubis.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - CPLD control constants - * ANUBIS - IRQ Number definitions - * ANUBIS - Memory map definitions - */ - -#ifndef __MACH_S3C24XX_ANUBIS_H -#define __MACH_S3C24XX_ANUBIS_H __FILE__ - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -/* irq */ - -#define ANUBIS_IRQ_IDE0 IRQ_EINT2 -#define ANUBIS_IRQ_IDE1 IRQ_EINT3 -#define ANUBIS_IRQ_ASIX IRQ_EINT1 - -/* map */ - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) -#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __MACH_S3C24XX_ANUBIS_H */ diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c deleted file mode 100644 index 67f0adc1fec0..000000000000 --- a/arch/arm/mach-s3c/bast-ide.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2007 Simtec Electronics -// http://www.simtec.co.uk/products/EB2410ITX/ -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <linux/platform_device.h> -#include <linux/ata_platform.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" -#include "irqs.h" - -#include "bast.h" - -/* IDE ports */ - -static struct pata_platform_info bast_ide_platdata = { - .ioport_shift = 5, -}; - -static struct resource bast_ide0_resource[] = { - [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), - [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0), -}; - -static struct platform_device bast_device_ide0 = { - .name = "pata_platform", - .id = 0, - .num_resources = ARRAY_SIZE(bast_ide0_resource), - .resource = bast_ide0_resource, - .dev = { - .platform_data = &bast_ide_platdata, - .coherent_dma_mask = ~0, - } - -}; - -static struct resource bast_ide1_resource[] = { - [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20), - [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1), -}; - -static struct platform_device bast_device_ide1 = { - .name = "pata_platform", - .id = 1, - .num_resources = ARRAY_SIZE(bast_ide1_resource), - .resource = bast_ide1_resource, - .dev = { - .platform_data = &bast_ide_platdata, - .coherent_dma_mask = ~0, - } -}; - -static struct platform_device *bast_ide_devices[] __initdata = { - &bast_device_ide0, - &bast_device_ide1, -}; - -static __init int bast_ide_init(void) -{ - if (machine_is_bast() || machine_is_vr1000()) - return platform_add_devices(bast_ide_devices, - ARRAY_SIZE(bast_ide_devices)); - - return 0; -} - -fs_initcall(bast_ide_init); diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c deleted file mode 100644 index cfc2ddc65513..000000000000 --- a/arch/arm/mach-s3c/bast-irq.c +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright 2003-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.simtec.co.uk/products/EB2410ITX/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/irq.h> - -#include "regs-irq.h" -#include "irqs.h" - -#include "bast.h" - -#define irqdbf(x...) -#define irqdbf2(x...) - -/* handle PC104 ISA interrupts from the system CPLD */ - -/* table of ISA irq nos to the relevant mask... zero means - * the irq is not implemented -*/ -static const unsigned char bast_pc104_irqmasks[] = { - 0, /* 0 */ - 0, /* 1 */ - 0, /* 2 */ - 1, /* 3 */ - 0, /* 4 */ - 2, /* 5 */ - 0, /* 6 */ - 4, /* 7 */ - 0, /* 8 */ - 0, /* 9 */ - 8, /* 10 */ - 0, /* 11 */ - 0, /* 12 */ - 0, /* 13 */ - 0, /* 14 */ - 0, /* 15 */ -}; - -static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 }; - -static void -bast_pc104_mask(struct irq_data *data) -{ - unsigned long temp; - - temp = __raw_readb(BAST_VA_PC104_IRQMASK); - temp &= ~bast_pc104_irqmasks[data->irq]; - __raw_writeb(temp, BAST_VA_PC104_IRQMASK); -} - -static void -bast_pc104_maskack(struct irq_data *data) -{ - struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA); - - bast_pc104_mask(data); - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static void -bast_pc104_unmask(struct irq_data *data) -{ - unsigned long temp; - - temp = __raw_readb(BAST_VA_PC104_IRQMASK); - temp |= bast_pc104_irqmasks[data->irq]; - __raw_writeb(temp, BAST_VA_PC104_IRQMASK); -} - -static struct irq_chip bast_pc104_chip = { - .irq_mask = bast_pc104_mask, - .irq_unmask = bast_pc104_unmask, - .irq_ack = bast_pc104_maskack -}; - -static void bast_irq_pc104_demux(struct irq_desc *desc) -{ - unsigned int stat; - unsigned int irqno; - int i; - - stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf; - - if (unlikely(stat == 0)) { - /* ack if we get an irq with nothing (ie, startup) */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - } else { - /* handle the IRQ */ - - for (i = 0; stat != 0; i++, stat >>= 1) { - if (stat & 1) { - irqno = bast_pc104_irqs[i]; - generic_handle_irq(irqno); - } - } - } -} - -static __init int bast_irq_init(void) -{ - unsigned int i; - - if (machine_is_bast()) { - printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n"); - - /* zap all the IRQs */ - - __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - - irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux); - - /* register our IRQs */ - - for (i = 0; i < 4; i++) { - unsigned int irqno = bast_pc104_irqs[i]; - - irq_set_chip_and_handler(irqno, &bast_pc104_chip, - handle_level_irq); - irq_clear_status_flags(irqno, IRQ_NOREQUEST); - } - } - - return 0; -} - -arch_initcall(bast_irq_init); diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h deleted file mode 100644 index a7726f93f5eb..000000000000 --- a/arch/arm/mach-s3c/bast.h +++ /dev/null @@ -1,194 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * BAST - CPLD control constants - * BAST - IRQ Number definitions - * BAST - Memory map definitions - */ - -#ifndef __MACH_S3C24XX_BAST_H -#define __MACH_S3C24XX_BAST_H __FILE__ - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0) -#define BAST_CPLD_DMA0_SECIDE (1) -#define BAST_CPLD_DMA0_ISA15 (2) -#define BAST_CPLD_DMA0_ISA36 (3) - -#define BAST_CPLD_DMA1_PRIIDE (0 << 2) -#define BAST_CPLD_DMA1_SECIDE (1 << 2) -#define BAST_CPLD_DMA1_ISA15 (2 << 2) -#define BAST_CPLD_DMA1_ISA36 (3 << 2) - -/* irq numbers to onboard peripherals */ - -#define BAST_IRQ_USBOC IRQ_EINT18 -#define BAST_IRQ_IDE0 IRQ_EINT16 -#define BAST_IRQ_IDE1 IRQ_EINT17 -#define BAST_IRQ_PCSERIAL1 IRQ_EINT15 -#define BAST_IRQ_PCSERIAL2 IRQ_EINT14 -#define BAST_IRQ_PCPARALLEL IRQ_EINT13 -#define BAST_IRQ_ASIX IRQ_EINT11 -#define BAST_IRQ_DM9000 IRQ_EINT10 -#define BAST_IRQ_ISA IRQ_EINT9 -#define BAST_IRQ_SMALERT IRQ_EINT8 - -/* map */ - -/* - * ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* - * 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#define BAST_IDE_CS S3C2410_CS5 - -#endif /* __MACH_S3C24XX_BAST_H */ diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c deleted file mode 100644 index 6d124bbd384c..000000000000 --- a/arch/arm/mach-s3c/common-smdk-s3c24xx.c +++ /dev/null @@ -1,228 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Common code for SMDK2410 and SMDK2440 boards -// -// http://www.fluff.org/ben/smdk2440/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include <linux/platform_data/leds-s3c24xx.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> - -#include "gpio-cfg.h" -#include "devs.h" -#include "pm.h" - -#include "common-smdk-s3c24xx.h" - -/* LED devices */ - -static struct gpiod_lookup_table smdk_led4_gpio_table = { - .dev_id = "s3c24xx_led.0", - .table = { - GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table smdk_led5_gpio_table = { - .dev_id = "s3c24xx_led.1", - .table = { - GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table smdk_led6_gpio_table = { - .dev_id = "s3c24xx_led.2", - .table = { - GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table smdk_led7_gpio_table = { - .dev_id = "s3c24xx_led.3", - .table = { - GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .name = "led4", - .def_trigger = "timer", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .name = "led5", - .def_trigger = "nand-disk", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .name = "led6", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .name = "led7", -}; - -static struct platform_device smdk_led4 = { - .name = "s3c24xx_led", - .id = 0, - .dev = { - .platform_data = &smdk_pdata_led4, - }, -}; - -static struct platform_device smdk_led5 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &smdk_pdata_led5, - }, -}; - -static struct platform_device smdk_led6 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &smdk_pdata_led6, - }, -}; - -static struct platform_device smdk_led7 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &smdk_pdata_led7, - }, -}; - -/* NAND parititon from 2.4.18-swl5 */ - -static struct mtd_partition smdk_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "S3C2410 flash partition 1", - .offset = 0, - .size = SZ_2M, - }, - [2] = { - .name = "S3C2410 flash partition 2", - .offset = SZ_4M, - .size = SZ_4M, - }, - [3] = { - .name = "S3C2410 flash partition 3", - .offset = SZ_8M, - .size = SZ_2M, - }, - [4] = { - .name = "S3C2410 flash partition 4", - .offset = SZ_1M * 10, - .size = SZ_4M, - }, - [5] = { - .name = "S3C2410 flash partition 5", - .offset = SZ_1M * 14, - .size = SZ_1M * 10, - }, - [6] = { - .name = "S3C2410 flash partition 6", - .offset = SZ_1M * 24, - .size = SZ_1M * 24, - }, - [7] = { - .name = "S3C2410 flash partition 7", - .offset = SZ_1M * 48, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct s3c2410_nand_set smdk_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(smdk_default_nand_part), - .partitions = smdk_default_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. -*/ - -static struct s3c2410_platform_nand smdk_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(smdk_nand_sets), - .sets = smdk_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* devices we initialise */ - -static struct platform_device __initdata *smdk_devs[] = { - &s3c_device_nand, - &smdk_led4, - &smdk_led5, - &smdk_led6, - &smdk_led7, -}; - -void __init smdk_machine_init(void) -{ - if (machine_is_smdk2443()) - smdk_nand_info.twrph0 = 50; - - s3c_nand_set_platdata(&smdk_nand_info); - - /* Disable pull-up on the LED lines */ - s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE); - - /* Add lookups for the lines */ - gpiod_add_lookup_table(&smdk_led4_gpio_table); - gpiod_add_lookup_table(&smdk_led5_gpio_table); - gpiod_add_lookup_table(&smdk_led6_gpio_table); - gpiod_add_lookup_table(&smdk_led7_gpio_table); - - platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - - s3c_pm_init(); -} diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h deleted file mode 100644 index c0352b06e435..000000000000 --- a/arch/arm/mach-s3c/common-smdk-s3c24xx.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - */ - -extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c deleted file mode 100644 index c1784d8facdf..000000000000 --- a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2009 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442 - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/cpufreq.h> -#include <linux/io.h> -#include <linux/clk.h> - -#include "map.h" -#include "regs-clock.h" - -#include <linux/soc/samsung/s3c-cpufreq-core.h> - -#include "regs-mem-s3c24xx.h" - -/** - * s3c2410_cpufreq_setrefresh - set SDRAM refresh value - * @cfg: The frequency configuration - * - * Set the SDRAM refresh value appropriately for the configured - * frequency. - */ -void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - unsigned long refval; - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * down to ensure that we do not overflow 32 bit numbers. - * - * This should work for HCLK up to 133MHz and refresh period up - * to 30usec. - */ - - refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); - refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ - refresh = (1 << 11) + 1 - refresh; - - s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh); - - refval = __raw_readl(S3C2410_REFRESH); - refval &= ~((1 << 12) - 1); - refval |= refresh; - __raw_writel(refval, S3C2410_REFRESH); -} - -/** - * s3c2410_set_fvco - set the PLL value - * @cfg: The frequency configuration - */ -void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) -{ - if (!IS_ERR(cfg->mpll)) - clk_set_rate(cfg->mpll, cfg->pll.frequency); -} - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) -u32 s3c2440_read_camdivn(void) -{ - return __raw_readl(S3C2440_CAMDIVN); -} - -void s3c2440_write_camdivn(u32 camdiv) -{ - __raw_writel(camdiv, S3C2440_CAMDIVN); -} -#endif - -u32 s3c24xx_read_clkdivn(void) -{ - return __raw_readl(S3C2410_CLKDIVN); -} - -void s3c24xx_write_clkdivn(u32 clkdiv) -{ - __raw_writel(clkdiv, S3C2410_CLKDIVN); -} - -u32 s3c24xx_read_mpllcon(void) -{ - return __raw_readl(S3C2410_MPLLCON); -} - -void s3c24xx_write_locktime(u32 locktime) -{ - return __raw_writel(locktime, S3C2410_LOCKTIME); -} diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h deleted file mode 100644 index 25fc9c258fc1..000000000000 --- a/arch/arm/mach-s3c/dma-s3c24xx.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2003-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#include <linux/device.h> - -/* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependent on the device) - * can be attached to any DMA source. We therefore let the DMA core handle - * the allocation of hardware channels to clients. -*/ - -enum dma_ch { - DMACH_XD0 = 0, - DMACH_XD1, - DMACH_SDI, - DMACH_SPI0, - DMACH_SPI1, - DMACH_UART0, - DMACH_UART1, - DMACH_UART2, - DMACH_TIMER, - DMACH_I2S_IN, - DMACH_I2S_OUT, - DMACH_PCM_IN, - DMACH_PCM_OUT, - DMACH_MIC_IN, - DMACH_USB_EP1, - DMACH_USB_EP2, - DMACH_USB_EP3, - DMACH_USB_EP4, - DMACH_UART0_SRC2, /* s3c2412 second uart sources */ - DMACH_UART1_SRC2, - DMACH_UART2_SRC2, - DMACH_UART3, /* s3c2443 has extra uart */ - DMACH_UART3_SRC2, - DMACH_SPI0_TX, /* s3c2443/2416/2450 hsspi0 */ - DMACH_SPI0_RX, /* s3c2443/2416/2450 hsspi0 */ - DMACH_SPI1_TX, /* s3c2443/2450 hsspi1 */ - DMACH_SPI1_RX, /* s3c2443/2450 hsspi1 */ - DMACH_MAX, /* the end entry */ -}; - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h deleted file mode 100644 index 0e07f3ba4aef..000000000000 --- a/arch/arm/mach-s3c/fb-core-s3c24xx.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright 2010 Samsung Electronics Co., Ltd. - * Pawel Osciak <p.osciak@samsung.com> - * - * Samsung framebuffer driver core functions - */ -#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H -#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__ - -/* - * These functions are only for use with the core support code, such as - * the CPU-specific initialization code. - */ - -/* Re-define device name depending on support. */ -static inline void s3c_fb_setname(char *name) -{ -#ifdef CONFIG_S3C_DEV_FB - s3c_device_fb.name = name; -#endif -} - -#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h deleted file mode 100644 index c29fdc95f883..000000000000 --- a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h +++ /dev/null @@ -1,103 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - GPIO lib support - */ - -/* some boards require extra gpio capacity to support external - * devices that need GPIO. - */ - -#ifndef GPIO_SAMSUNG_S3C24XX_H -#define GPIO_SAMSUNG_S3C24XX_H - -#include "map.h" - -/* - * GPIO sizes for various SoCs: - * - * 2410 2412 2440 2443 2416 - * 2442 - * ---- ---- ---- ---- ---- - * A 23 22 25 16 27 - * B 11 11 11 11 11 - * C 16 16 16 16 16 - * D 16 16 16 16 16 - * E 16 16 16 16 16 - * F 8 8 8 8 8 - * G 16 16 16 16 8 - * H 11 11 11 15 15 - * J -- -- 13 16 -- - * K -- -- -- -- 16 - * L -- -- -- 15 14 - * M -- -- -- 2 2 - */ - -/* GPIO bank sizes */ - -#define S3C2410_GPIO_A_NR (32) -#define S3C2410_GPIO_B_NR (32) -#define S3C2410_GPIO_C_NR (32) -#define S3C2410_GPIO_D_NR (32) -#define S3C2410_GPIO_E_NR (32) -#define S3C2410_GPIO_F_NR (32) -#define S3C2410_GPIO_G_NR (32) -#define S3C2410_GPIO_H_NR (32) -#define S3C2410_GPIO_J_NR (32) /* technically 16. */ -#define S3C2410_GPIO_K_NR (32) /* technically 16. */ -#define S3C2410_GPIO_L_NR (32) /* technically 15. */ -#define S3C2410_GPIO_M_NR (32) /* technically 2. */ - -#if CONFIG_S3C_GPIO_SPACE != 0 -#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment -#endif - -#define S3C2410_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0) - -#ifndef __ASSEMBLY__ - -enum s3c_gpio_number { - S3C2410_GPIO_A_START = 0, - S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A), - S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B), - S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C), - S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D), - S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), - S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), - S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), - S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), - S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), - S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), - S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), -}; - -#endif /* __ASSEMBLY__ */ - -/* S3C2410 GPIO number definitions. */ - -#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr)) -#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr)) -#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr)) -#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr)) -#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr)) -#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) -#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) -#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) -#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) -#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) -#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) -#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) - -#ifdef CONFIG_CPU_S3C244X -#define S3C_GPIO_END (S3C2410_GPJ(0) + 32) -#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define S3C_GPIO_END (S3C2410_GPM(0) + 32) -#else -#define S3C_GPIO_END (S3C2410_GPH(0) + 32) -#endif - -#endif /* GPIO_SAMSUNG_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h deleted file mode 100644 index 043ae382bfc5..000000000000 --- a/arch/arm/mach-s3c/gta02.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * GTA02 header - */ - -#ifndef __MACH_S3C24XX_GTA02_H -#define __MACH_S3C24XX_GTA02_H __FILE__ - -#include "regs-gpio.h" - -#define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) -#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) -#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) -#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ - -#define GTA02_IRQ_PCF50633 IRQ_EINT9 - -#endif /* __MACH_S3C24XX_GTA02_H */ diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c deleted file mode 100644 index 59edcf8a620d..000000000000 --- a/arch/arm/mach-s3c/h1940-bluetooth.c +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-1.0+ -// -// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org> -// -// S3C2410 bluetooth "driver" - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/rfkill.h> - -#include "gpio-cfg.h" -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "h1940.h" - -#define DRV_NAME "h1940-bt" - -/* Bluetooth control */ -static void h1940bt_enable(int on) -{ - if (on) { - /* Power on the chip */ - gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1); - /* Reset the chip */ - mdelay(10); - - gpio_set_value(S3C2410_GPH(1), 1); - mdelay(10); - gpio_set_value(S3C2410_GPH(1), 0); - - h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL); - } - else { - gpio_set_value(S3C2410_GPH(1), 1); - mdelay(10); - gpio_set_value(S3C2410_GPH(1), 0); - mdelay(10); - gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); - - h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL); - } -} - -static int h1940bt_set_block(void *data, bool blocked) -{ - h1940bt_enable(!blocked); - return 0; -} - -static const struct rfkill_ops h1940bt_rfkill_ops = { - .set_block = h1940bt_set_block, -}; - -static int h1940bt_probe(struct platform_device *pdev) -{ - struct rfkill *rfk; - int ret = 0; - - ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); - if (ret) { - dev_err(&pdev->dev, "could not get GPH1\n"); - return ret; - } - - ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev)); - if (ret) { - gpio_free(S3C2410_GPH(1)); - dev_err(&pdev->dev, "could not get BT_POWER\n"); - return ret; - } - - /* Configures BT serial port GPIOs */ - s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); - - rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, - &h1940bt_rfkill_ops, NULL); - if (!rfk) { - ret = -ENOMEM; - goto err_rfk_alloc; - } - - ret = rfkill_register(rfk); - if (ret) - goto err_rfkill; - - platform_set_drvdata(pdev, rfk); - - return 0; - -err_rfkill: - rfkill_destroy(rfk); -err_rfk_alloc: - return ret; -} - -static int h1940bt_remove(struct platform_device *pdev) -{ - struct rfkill *rfk = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - gpio_free(S3C2410_GPH(1)); - - if (rfk) { - rfkill_unregister(rfk); - rfkill_destroy(rfk); - } - rfk = NULL; - - h1940bt_enable(0); - - return 0; -} - - -static struct platform_driver h1940bt_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = h1940bt_probe, - .remove = h1940bt_remove, -}; - -module_platform_driver(h1940bt_driver); - -MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>"); -MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h deleted file mode 100644 index 5dfe9d10cd15..000000000000 --- a/arch/arm/mach-s3c/h1940.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright 2006 Ben Dooks <ben-linux@fluff.org> - * - * Copyright (c) 2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * iPAQ H1940 series definitions - */ - -#ifndef __MACH_S3C24XX_H1940_H -#define __MACH_S3C24XX_H1940_H __FILE__ - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -struct gpio_desc; - -extern void h1940_pm_return(void); -extern int h1940_led_blink_set(struct gpio_desc *desc, int state, - unsigned long *delay_on, - unsigned long *delay_off); - -#include <linux/gpio.h> - -#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) - -/* SD layer latch */ - -#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0) -#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1) -#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2) -#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3) -#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4) -#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5) -#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6) -#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7) - -/* CPU layer latch */ - -#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8) -#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) -#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) -#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) -#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12) -#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) -#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) -#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) - -#endif /* __MACH_S3C24XX_H1940_H */ diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h deleted file mode 100644 index 33b37467d05f..000000000000 --- a/arch/arm/mach-s3c/hardware-s3c24xx.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - hardware - */ - -#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H -#define __ASM_ARCH_HARDWARE_S3C24XX_H - -extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); - -#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c deleted file mode 100644 index 09f388d8f824..000000000000 --- a/arch/arm/mach-s3c/iotiming-s3c2410.c +++ /dev/null @@ -1,472 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006-2009 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442 - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/cpufreq.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include "map.h" -#include "regs-clock.h" - -#include <linux/soc/samsung/s3c-cpufreq-core.h> - -#include "regs-mem-s3c24xx.h" - -#define print_ns(x) ((x) / 10), ((x) % 10) - -/** - * s3c2410_print_timing - print bank timing data for debug purposes - * @pfx: The prefix to put on the output - * @timings: The timing inforamtion to print. -*/ -static void s3c2410_print_timing(const char *pfx, - struct s3c_iotimings *timings) -{ - struct s3c2410_iobank_timing *bt; - int bank; - - for (bank = 0; bank < MAX_BANKS; bank++) { - bt = timings->bank[bank].io_2410; - if (!bt) - continue; - - printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, " - "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank, - print_ns(bt->tacs), - print_ns(bt->tcos), - print_ns(bt->tacc), - print_ns(bt->tcoh), - print_ns(bt->tcah)); - } -} - -/** - * bank_reg - convert bank number to pointer to the control register. - * @bank: The IO bank number. - */ -static inline void __iomem *bank_reg(unsigned int bank) -{ - return S3C2410_BANKCON0 + (bank << 2); -} - -/** - * bank_is_io - test whether bank is used for IO - * @bankcon: The bank control register. - * - * This is a simplistic test to see if any BANKCON[x] is not an IO - * bank. It currently does not take into account whether BWSCON has - * an illegal width-setting in it, or if the pin connected to nCS[x] - * is actually being handled as a chip-select. - */ -static inline int bank_is_io(unsigned long bankcon) -{ - return !(bankcon & S3C2410_BANKCON_SDRAM); -} - -/** - * to_div - convert cycle time to divisor - * @cyc: The cycle time, in 10ths of nanoseconds. - * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * - * Convert the given cycle time into the divisor to use to obtain it from - * HCLK. -*/ -static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns) -{ - if (cyc == 0) - return 0; - - return DIV_ROUND_UP(cyc, hclk_tns); -} - -/** - * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4 - * @cyc: The cycle time, in 10ths of nanoseconds. - * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * @v: Pointer to register to alter. - * @shift: The shift to get to the control bits. - * - * Calculate the divisor, and turn it into the correct control bits to - * set in the result, @v. - */ -static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns, - unsigned long *v, int shift) -{ - unsigned int div = to_div(cyc, hclk_tns); - unsigned long val; - - s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n", - __func__, cyc, hclk_tns, shift, div); - - switch (div) { - case 0: - val = 0; - break; - case 1: - val = 1; - break; - case 2: - val = 2; - break; - case 3: - case 4: - val = 3; - break; - default: - return -1; - } - - *v |= val << shift; - return 0; -} - -static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v) -{ - /* Currently no support for Tacp calculations. */ - return 0; -} - -/** - * calc_tacc - calculate divisor control for tacc. - * @cyc: The cycle time, in 10ths of nanoseconds. - * @nwait_en: IS nWAIT enabled for this bank. - * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * @v: Pointer to register to alter. - * - * Calculate the divisor control for tACC, taking into account whether - * the bank has nWAIT enabled. The result is used to modify the value - * pointed to by @v. -*/ -static int calc_tacc(unsigned int cyc, int nwait_en, - unsigned long hclk_tns, unsigned long *v) -{ - unsigned int div = to_div(cyc, hclk_tns); - unsigned long val; - - s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n", - __func__, cyc, nwait_en, hclk_tns, div); - - /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */ - if (nwait_en && div < 4) - div = 4; - - switch (div) { - case 0: - val = 0; - break; - - case 1: - case 2: - case 3: - case 4: - val = div - 1; - break; - - case 5: - case 6: - val = 4; - break; - - case 7: - case 8: - val = 5; - break; - - case 9: - case 10: - val = 6; - break; - - case 11: - case 12: - case 13: - case 14: - val = 7; - break; - - default: - return -1; - } - - *v |= val << 8; - return 0; -} - -/** - * s3c2410_calc_bank - calculate bank timing information - * @cfg: The configuration we need to calculate for. - * @bt: The bank timing information. - * - * Given the cycle timine for a bank @bt, calculate the new BANKCON - * setting for the @cfg timing. This updates the timing information - * ready for the cpu frequency change. - */ -static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg, - struct s3c2410_iobank_timing *bt) -{ - unsigned long hclk = cfg->freq.hclk_tns; - unsigned long res; - int ret; - - res = bt->bankcon; - res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16); - - /* tacp: 2,3,4,5 */ - /* tcah: 0,1,2,4 */ - /* tcoh: 0,1,2,4 */ - /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */ - /* tcos: 0,1,2,4 */ - /* tacs: 0,1,2,4 */ - - ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT); - ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT); - ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT); - ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT); - - if (ret) - return -EINVAL; - - ret |= calc_tacp(bt->tacp, hclk, &res); - ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res); - - if (ret) - return -EINVAL; - - bt->bankcon = res; - return 0; -} - -static const unsigned int tacc_tab[] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [4] = 6, - [5] = 9, - [6] = 10, - [7] = 14, -}; - -/** - * get_tacc - turn tACC value into cycle time - * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * @val: The bank timing register value, shifted down. - */ -static unsigned int get_tacc(unsigned long hclk_tns, - unsigned long val) -{ - val &= 7; - return hclk_tns * tacc_tab[val]; -} - -/** - * get_0124 - turn 0/1/2/4 divider into cycle time - * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * @val: The bank timing register value, shifed down. - */ -static unsigned int get_0124(unsigned long hclk_tns, - unsigned long val) -{ - val &= 3; - return hclk_tns * ((val == 3) ? 4 : val); -} - -/** - * s3c2410_iotiming_getbank - turn BANKCON into cycle time information - * @cfg: The frequency configuration - * @bt: The bank timing to fill in (uses cached BANKCON) - * - * Given the BANKCON setting in @bt and the current frequency settings - * in @cfg, update the cycle timing information. - */ -static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg, - struct s3c2410_iobank_timing *bt) -{ - unsigned long bankcon = bt->bankcon; - unsigned long hclk = cfg->freq.hclk_tns; - - bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); - bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); - bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); - bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); - bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); -} - -/** - * s3c2410_iotiming_debugfs - debugfs show io bank timing information - * @seq: The seq_file to write output to using seq_printf(). - * @cfg: The current configuration. - * @iob: The IO bank information to decode. - */ -void s3c2410_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob) -{ - struct s3c2410_iobank_timing *bt = iob->io_2410; - unsigned long bankcon = bt->bankcon; - unsigned long hclk = cfg->freq.hclk_tns; - unsigned int tacs; - unsigned int tcos; - unsigned int tacc; - unsigned int tcoh; - unsigned int tcah; - - seq_printf(seq, "BANKCON=0x%08lx\n", bankcon); - - tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT); - tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT); - tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT); - tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT); - tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT); - - seq_printf(seq, - "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", - print_ns(bt->tacs), - print_ns(bt->tcos), - print_ns(bt->tacc), - print_ns(bt->tcoh), - print_ns(bt->tcah)); - - seq_printf(seq, - "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n", - print_ns(tacs), - print_ns(tcos), - print_ns(tacc), - print_ns(tcoh), - print_ns(tcah)); -} - -/** - * s3c2410_iotiming_calc - Calculate bank timing for frequency change. - * @cfg: The frequency configuration - * @iot: The IO timing information to fill out. - * - * Calculate the new values for the banks in @iot based on the new - * frequency information in @cfg. This is then used by s3c2410_iotiming_set() - * to update the timing when necessary. - */ -int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot) -{ - struct s3c2410_iobank_timing *bt; - unsigned long bankcon; - int bank; - int ret; - - for (bank = 0; bank < MAX_BANKS; bank++) { - bankcon = __raw_readl(bank_reg(bank)); - bt = iot->bank[bank].io_2410; - - if (!bt) - continue; - - bt->bankcon = bankcon; - - ret = s3c2410_calc_bank(cfg, bt); - if (ret) { - printk(KERN_ERR "%s: cannot calculate bank %d io\n", - __func__, bank); - goto err; - } - - s3c_freq_iodbg("%s: bank %d: con=%08lx\n", - __func__, bank, bt->bankcon); - } - - return 0; - err: - return ret; -} - -/** - * s3c2410_iotiming_set - set the IO timings from the given setup. - * @cfg: The frequency configuration - * @iot: The IO timing information to use. - * - * Set all the currently used IO bank timing information generated - * by s3c2410_iotiming_calc() once the core has validated that all - * the new values are within permitted bounds. - */ -void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot) -{ - struct s3c2410_iobank_timing *bt; - int bank; - - /* set the io timings from the specifier */ - - for (bank = 0; bank < MAX_BANKS; bank++) { - bt = iot->bank[bank].io_2410; - if (!bt) - continue; - - __raw_writel(bt->bankcon, bank_reg(bank)); - } -} - -/** - * s3c2410_iotiming_get - Get the timing information from current registers. - * @cfg: The frequency configuration - * @timings: The IO timing information to fill out. - * - * Calculate the @timings timing information from the current frequency - * information in @cfg, and the new frequency configuration - * through all the IO banks, reading the state and then updating @iot - * as necessary. - * - * This is used at the moment on initialisation to get the current - * configuration so that boards do not have to carry their own setup - * if the timings are correct on initialisation. - */ - -int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings) -{ - struct s3c2410_iobank_timing *bt; - unsigned long bankcon; - unsigned long bwscon; - int bank; - - bwscon = __raw_readl(S3C2410_BWSCON); - - /* look through all banks to see what is currently set. */ - - for (bank = 0; bank < MAX_BANKS; bank++) { - bankcon = __raw_readl(bank_reg(bank)); - - if (!bank_is_io(bankcon)) - continue; - - s3c_freq_iodbg("%s: bank %d: con %08lx\n", - __func__, bank, bankcon); - - bt = kzalloc(sizeof(*bt), GFP_KERNEL); - if (!bt) - return -ENOMEM; - - /* find out in nWait is enabled for bank. */ - - if (bank != 0) { - unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank); - if (tmp & S3C2410_BWSCON_WS) - bt->nwait_en = 1; - } - - timings->bank[bank].io_2410 = bt; - bt->bankcon = bankcon; - - s3c2410_iotiming_getbank(cfg, bt); - } - - s3c2410_print_timing("get", timings); - return 0; -} diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c deleted file mode 100644 index 003f89c4dc53..000000000000 --- a/arch/arm/mach-s3c/iotiming-s3c2412.c +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006-2008 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// S3C2412/S3C2443 (PL093 based) IO timing support - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/seq_file.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include <linux/amba/pl093.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "cpu.h" -#include <linux/soc/samsung/s3c-cpufreq-core.h> - -#include "s3c2412.h" - -#define print_ns(x) ((x) / 10), ((x) % 10) - -/** - * s3c2412_print_timing - print timing information via printk. - * @pfx: The prefix to print each line with. - * @iot: The IO timing information - */ -static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot) -{ - struct s3c2412_iobank_timing *bt; - unsigned int bank; - - for (bank = 0; bank < MAX_BANKS; bank++) { - bt = iot->bank[bank].io_2412; - if (!bt) - continue; - - printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" - "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank, - print_ns(bt->idcy), - print_ns(bt->wstrd), - print_ns(bt->wstwr), - print_ns(bt->wstoen), - print_ns(bt->wstwen), - print_ns(bt->wstbrd)); - } -} - -/** - * to_div - turn a cycle length into a divisor setting. - * @cyc_tns: The cycle time in 10ths of nanoseconds. - * @clk_tns: The clock period in 10ths of nanoseconds. - */ -static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns) -{ - return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0; -} - -/** - * calc_timing - calculate timing divisor value and check in range. - * @hwtm: The hardware timing in 10ths of nanoseconds. - * @clk_tns: The clock period in 10ths of nanoseconds. - * @err: Pointer to err variable to update in event of failure. - */ -static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns, - unsigned int *err) -{ - unsigned int ret = to_div(hwtm, clk_tns); - - if (ret > 0xf) - *err = -EINVAL; - - return ret; -} - -/** - * s3c2412_calc_bank - calculate the bank divisor settings. - * @cfg: The current frequency configuration. - * @bt: The bank timing. - */ -static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg, - struct s3c2412_iobank_timing *bt) -{ - unsigned int hclk = cfg->freq.hclk_tns; - int err = 0; - - bt->smbidcyr = calc_timing(bt->idcy, hclk, &err); - bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err); - bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err); - bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err); - bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err); - bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err); - - return err; -} - -/** - * s3c2412_iotiming_debugfs - debugfs show io bank timing information - * @seq: The seq_file to write output to using seq_printf(). - * @cfg: The current configuration. - * @iob: The IO bank information to decode. -*/ -void s3c2412_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob) -{ - struct s3c2412_iobank_timing *bt = iob->io_2412; - - seq_printf(seq, - "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" - "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", - print_ns(bt->idcy), - print_ns(bt->wstrd), - print_ns(bt->wstwr), - print_ns(bt->wstoen), - print_ns(bt->wstwen), - print_ns(bt->wstbrd)); -} - -/** - * s3c2412_iotiming_calc - calculate all the bank divisor settings. - * @cfg: The current frequency configuration. - * @iot: The bank timing information. - * - * Calculate the timing information for all the banks that are - * configured as IO, using s3c2412_calc_bank(). - */ -int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot) -{ - struct s3c2412_iobank_timing *bt; - int bank; - int ret; - - for (bank = 0; bank < MAX_BANKS; bank++) { - bt = iot->bank[bank].io_2412; - if (!bt) - continue; - - ret = s3c2412_calc_bank(cfg, bt); - if (ret) { - printk(KERN_ERR "%s: cannot calculate bank %d io\n", - __func__, bank); - goto err; - } - } - - return 0; - err: - return ret; -} - -/** - * s3c2412_iotiming_set - set the timing information - * @cfg: The current frequency configuration. - * @iot: The bank timing information. - * - * Set the IO bank information from the details calculated earlier from - * calling s3c2412_iotiming_calc(). - */ -void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot) -{ - struct s3c2412_iobank_timing *bt; - void __iomem *regs; - int bank; - - /* set the io timings from the specifier */ - - for (bank = 0; bank < MAX_BANKS; bank++) { - bt = iot->bank[bank].io_2412; - if (!bt) - continue; - - regs = S3C2412_SSMC_BANK(bank); - - __raw_writel(bt->smbidcyr, regs + SMBIDCYR); - __raw_writel(bt->smbwstrd, regs + SMBWSTRDR); - __raw_writel(bt->smbwstwr, regs + SMBWSTWRR); - __raw_writel(bt->smbwstoen, regs + SMBWSTOENR); - __raw_writel(bt->smbwstwen, regs + SMBWSTWENR); - __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR); - } -} - -static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg) -{ - return (reg & 0xf) * clock; -} - -static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg, - struct s3c2412_iobank_timing *bt, - unsigned int bank) -{ - unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */ - void __iomem *regs = S3C2412_SSMC_BANK(bank); - - bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR)); - bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR)); - bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR)); - bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR)); - bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR)); -} - -/** - * bank_is_io - return true if bank is (possibly) IO. - * @bank: The bank number. - * @bankcfg: The value of S3C2412_EBI_BANKCFG. - */ -static inline bool bank_is_io(unsigned int bank, u32 bankcfg) -{ - if (bank < 2) - return true; - - return !(bankcfg & (1 << bank)); -} - -int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings) -{ - struct s3c2412_iobank_timing *bt; - u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG); - unsigned int bank; - - /* look through all banks to see what is currently set. */ - - for (bank = 0; bank < MAX_BANKS; bank++) { - if (!bank_is_io(bank, bankcfg)) - continue; - - bt = kzalloc(sizeof(*bt), GFP_KERNEL); - if (!bt) - return -ENOMEM; - - timings->bank[bank].io_2412 = bt; - s3c2412_iotiming_getbank(cfg, bt, bank); - } - - s3c2412_print_timing("get", timings); - return 0; -} - -/* this is in here as it is so small, it doesn't currently warrant a file - * to itself. We expect that any s3c24xx needing this is going to also - * need the iotiming support. - */ -void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - u32 refresh; - - WARN_ON(board == NULL); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * down to ensure that we do not overflow 32 bit numbers. - * - * This should work for HCLK up to 133MHz and refresh period up - * to 30usec. - */ - - refresh = (cfg->freq.hclk / 100) * (board->refresh / 10); - refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */ - refresh &= ((1 << 16) - 1); - - s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh); - - __raw_writel(refresh, S3C2412_REFRESH); -} diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c deleted file mode 100644 index 55f41135ad70..000000000000 --- a/arch/arm/mach-s3c/irq-pm-s3c24xx.c +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2003-2004 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// http://armlinux.simtec.co.uk/ -// -// S3C24XX - IRQ PM code - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/syscore_ops.h> -#include <linux/io.h> - -#include "cpu.h" -#include "pm.h" -#include "map-base.h" -#include "map-s3c.h" - -#include "regs-irq.h" -#include "regs-gpio.h" -#include "pm-core.h" - -#include <asm/irq.h> - -int s3c_irq_wake(struct irq_data *data, unsigned int state) -{ - unsigned long irqbit = 1 << data->hwirq; - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - pr_info("wake %s for hwirq %lu\n", - state ? "enabled" : "disabled", data->hwirq); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), -}; - -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -static int s3c24xx_irq_suspend(void) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; -} - -static void s3c24xx_irq_resume(void) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); -} - -struct syscore_ops s3c24xx_irq_syscore_ops = { - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -#ifdef CONFIG_CPU_S3C2416 -static struct sleep_save s3c2416_irq_save[] = { - SAVE_ITEM(S3C2416_INTMSK2), -}; - -static int s3c2416_irq_suspend(void) -{ - s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); - - return 0; -} - -static void s3c2416_irq_resume(void) -{ - s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); -} - -struct syscore_ops s3c2416_irq_syscore_ops = { - .suspend = s3c2416_irq_suspend, - .resume = s3c2416_irq_resume, -}; -#endif diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c deleted file mode 100644 index 84cf86376ded..000000000000 --- a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include <linux/stddef.h> -#include <linux/export.h> -#include <linux/spi/s3c24xx-fiq.h> - -EXPORT_SYMBOL(s3c24xx_spi_fiq_rx); -EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx); -EXPORT_SYMBOL(s3c24xx_spi_fiq_tx); diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S deleted file mode 100644 index 5d238d9a798e..000000000000 --- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S +++ /dev/null @@ -1,112 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/drivers/spi/spi_s3c24xx_fiq.S - * - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - FIQ pseudo-DMA transfer code -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -#include "map.h" -#include "regs-irq.h" - -#include <linux/spi/s3c24xx-fiq.h> - -#define S3C2410_SPTDAT (0x10) -#define S3C2410_SPRDAT (0x14) - - .text - - @ entry to these routines is as follows, with the register names - @ defined in fiq.h so that they can be shared with the C files which - @ setup the calling registers. - @ - @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND - @ fiq_rtmp Temporary register to hold tx/rx data - @ fiq_rspi The base of the SPI register block - @ fiq_rtx The tx buffer pointer - @ fiq_rrx The rx buffer pointer - @ fiq_rcount The number of bytes to move - - @ each entry starts with a word entry of how long it is - @ and an offset to the irq acknowledgment word - -ENTRY(s3c24xx_spi_fiq_rx) - .word fiq_rx_end - fiq_rx_start - .word fiq_rx_irq_ack - fiq_rx_start -fiq_rx_start: - ldr fiq_rtmp, fiq_rx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - mov fiq_rtmp, #0xff - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subsne pc, lr, #4 @@ return, still have work to do - - @@ set IRQ controller so that next op will trigger IRQ - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_rx_irq_ack: - .word 0 -fiq_rx_end: - -ENTRY(s3c24xx_spi_fiq_txrx) - .word fiq_txrx_end - fiq_txrx_start - .word fiq_txrx_irq_ack - fiq_txrx_start -fiq_txrx_start: - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - ldr fiq_rtmp, fiq_txrx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subsne pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_txrx_irq_ack: - .word 0 - -fiq_txrx_end: - -ENTRY(s3c24xx_spi_fiq_tx) - .word fiq_tx_end - fiq_tx_start - .word fiq_tx_irq_ack - fiq_tx_start -fiq_tx_start: - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - - ldr fiq_rtmp, fiq_tx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subsne pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_tx_irq_ack: - .word 0 - -fiq_tx_end: - - .end diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c deleted file mode 100644 index 088cc04b7431..000000000000 --- a/arch/arm/mach-s3c/irq-s3c24xx.c +++ /dev/null @@ -1,1352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> -*/ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irqdomain.h> -#include <linux/irqchip.h> -#include <linux/irqchip/chained_irq.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> -#include <linux/spi/s3c24xx.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> - -#include "irqs.h" -#include "regs-irq.h" -#include "regs-gpio.h" - -#include "cpu.h" -#include "regs-irqtype.h" -#include "pm.h" -#include "s3c24xx.h" - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long offset; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Structure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -/* - * Array holding pointers to the global controller structs - * [0] ... main_intc - * [1] ... sub_intc - * [2] ... main_intc2 on s3c2416 - */ -static struct s3c_irq_intc *s3c_intc[3]; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = readl_relaxed(intc->reg_mask); - mask |= (1UL << irq_data->offset); - writel_relaxed(mask, intc->reg_mask); - - if (parent_intc) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ - * The parent_irq is always in main_intc, so the hwirq - * for find_mapping does not need an offset in any case. - */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *parent_intc = intc->parent; - unsigned long mask; - unsigned int irqno; - - mask = readl_relaxed(intc->reg_mask); - mask &= ~(1UL << irq_data->offset); - writel_relaxed(mask, intc->reg_mask); - - if (parent_intc) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - unsigned long bitval = 1UL << irq_data->offset; - - writel_relaxed(bitval, intc->reg_pending); - if (intc->reg_intpnd) - writel_relaxed(bitval, intc->reg_intpnd); -} - -static int s3c_irq_type(struct irq_data *data, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_NONE: - break; - case IRQ_TYPE_EDGE_RISING: - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_BOTH: - irq_set_handler(data->irq, handle_edge_irq); - break; - case IRQ_TYPE_LEVEL_LOW: - case IRQ_TYPE_LEVEL_HIGH: - irq_set_handler(data->irq, handle_level_irq); - break; - default: - pr_err("No such irq type %d\n", type); - return -EINVAL; - } - - return 0; -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = readl_relaxed(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - writel_relaxed(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d\n", type); - return -EINVAL; - } - - value = readl_relaxed(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - writel_relaxed(value, extint_reg); - - return 0; -} - -static int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if (data->hwirq <= 3) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_type = s3c_irq_type, - .irq_set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irq_type, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned int n, offset; - unsigned long src, msk; - - /* we're using individual domains for the non-dt case - * and one big domain for the dt case where the subintc - * starts at hwirq number 32. - */ - offset = irq_domain_get_of_node(intc->domain) ? 32 : 0; - - chained_irq_enter(chip, desc); - - src = readl_relaxed(sub_intc->reg_pending); - msk = readl_relaxed(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - generic_handle_domain_irq(sub_intc->domain, offset + n); - } - - chained_irq_exit(chip, desc); -} - -static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, - struct pt_regs *regs, int intc_offset) -{ - int pnd; - int offset; - - pnd = readl_relaxed(intc->reg_intpnd); - if (!pnd) - return false; - - /* non-dt machines use individual domains */ - if (!irq_domain_get_of_node(intc->domain)) - intc_offset = 0; - - /* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem - */ - offset = readl_relaxed(intc->reg_intpnd + 4); - - /* Find the bit manually, when the offset is wrong. - * The pending register only ever contains the one bit of the next - * interrupt to handle. - */ - if (!(pnd & (1 << offset))) - offset = __ffs(pnd); - - generic_handle_domain_irq(intc->domain, intc_offset + offset); - return true; -} - -static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) -{ - do { - /* - * For platform based machines, neither ERR nor NULL can happen here. - * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds: - * - * s3c_intc[0] = s3c24xx_init_intc() - * - * If this fails, the next calls to s3c24xx_init_intc() won't be executed. - * - * For DT machine, s3c_init_intc_of() could set the IRQ handler without - * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no - * such code path, so again the s3c_intc[0] will have a valid pointer if - * set_handle_irq() is called. - * - * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something. - */ - if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) - continue; - - if (!IS_ERR_OR_NULL(s3c_intc[2])) - if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) - continue; - - break; - } while (1); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @ack_ptr: pointer to a location for storing the bit mask - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - * - * returns the mask value for the register. - */ -int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return 0; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - if (ack_ptr) - *ack_ptr = intmod; - writel_relaxed(intmod, S3C2410_INTMOD); - - return intmod; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - irq_data->offset = hw; - - parent_intc = intc->parent; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - /* On the S3C2412, the EINT0to3 have a parent irq - * but need the s3c_irq_eint0t4 chip - */ - if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (parent_intc) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - - irq_set_chip_data(virq, irq_data); - - if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { - if (irq_data->parent_irq > 31) { - pr_err("irq-s3c24xx: parent irq %lu is out of range\n", - irq_data->parent_irq); - return -EINVAL; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - return -EINVAL; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; -} - -static const struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = readl_relaxed(reg_source); - - if (pend == 0 || pend == last) - break; - - writel_relaxed(pend, intc->reg_pending); - if (intc->reg_intpnd) - writel_relaxed(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0xa8; - irq_num = 24; - irq_start = S3C2410_IRQ(32); - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - 0, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - set_handle_irq(s3c24xx_handle_irq); - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -static struct s3c_irq_data __maybe_unused init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -#ifdef CONFIG_CPU_S3C2410 -static struct s3c_irq_data init_s3c2410base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2410subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c2410_init_irq(void) -{ -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], - s3c_intc[0], 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); -} -#endif - -#ifdef CONFIG_CPU_S3C2412 -static struct s3c_irq_data init_s3c2412base[32] = { - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2412eint[32] = { - { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_s3c2412subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ -}; - -void __init s3c2412_init_irq(void) -{ - pr_info("S3C2412: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ -}; - -void __init s3c2416_init_irq(void) -{ - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], - s3c_intc[0], 0x4a000018); - - s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], - NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2440 -static struct s3c_irq_data init_s3c2440base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2440subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2440_init_irq(void) -{ - pr_info("S3C2440: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2442 -static struct s3c_irq_data init_s3c2442base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2442subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ -}; - -void __init s3c2442_init_irq(void) -{ - pr_info("S3C2442: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_OF -static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - unsigned int ctrl_num = hw / 32; - unsigned int intc_hw = hw % 32; - struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - irq_data->offset = intc_hw; - - if (!parent_intc) - irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - - irq_set_chip_data(virq, irq_data); - - return 0; -} - -/* Translate our of irq notation - * format: <ctrl_num ctrl_irq parent_irq type> - */ -static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type) -{ - struct s3c_irq_intc *intc; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *irq_data; - struct s3c_irq_data *parent_irq_data; - int irqno; - - if (WARN_ON(intsize < 4)) - return -EINVAL; - - if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { - pr_err("controller number %d invalid\n", intspec[0]); - return -EINVAL; - } - intc = s3c_intc[intspec[0]]; - - *out_hwirq = intspec[0] * 32 + intspec[2]; - *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; - - parent_intc = intc->parent; - if (parent_intc) { - irq_data = &intc->irqs[intspec[2]]; - irq_data->parent_irq = intspec[1]; - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << intspec[2]); - - /* parent_intc is always s3c_intc[0], so no offset */ - irqno = irq_create_mapping(parent_intc->domain, intspec[1]); - if (irqno < 0) { - pr_err("irq: could not map parent interrupt\n"); - return irqno; - } - - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; -} - -static const struct irq_domain_ops s3c24xx_irq_ops_of = { - .map = s3c24xx_irq_map_of, - .xlate = s3c24xx_irq_xlate_of, -}; - -struct s3c24xx_irq_of_ctrl { - char *name; - unsigned long offset; - struct s3c_irq_intc **handle; - struct s3c_irq_intc **parent; - struct irq_domain_ops *ops; -}; - -static int __init s3c_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent, - struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) -{ - struct s3c_irq_intc *intc; - struct s3c24xx_irq_of_ctrl *ctrl; - struct irq_domain *domain; - void __iomem *reg_base; - int i; - - reg_base = of_iomap(np, 0); - if (!reg_base) { - pr_err("irq-s3c24xx: could not map irq registers\n"); - return -EINVAL; - } - - domain = irq_domain_add_linear(np, num_ctrl * 32, - &s3c24xx_irq_ops_of, NULL); - if (!domain) { - pr_err("irq: could not create irq-domain\n"); - return -EINVAL; - } - - for (i = 0; i < num_ctrl; i++) { - ctrl = &s3c_ctrl[i]; - - pr_debug("irq: found controller %s\n", ctrl->name); - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return -ENOMEM; - - intc->domain = domain; - intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data), - GFP_KERNEL); - if (!intc->irqs) { - kfree(intc); - return -ENOMEM; - } - - if (ctrl->parent) { - intc->reg_pending = reg_base + ctrl->offset; - intc->reg_mask = reg_base + ctrl->offset + 0x4; - - if (*(ctrl->parent)) { - intc->parent = *(ctrl->parent); - } else { - pr_warn("irq: parent of %s missing\n", - ctrl->name); - kfree(intc->irqs); - kfree(intc); - continue; - } - } else { - intc->reg_pending = reg_base + ctrl->offset; - intc->reg_mask = reg_base + ctrl->offset + 0x08; - intc->reg_intpnd = reg_base + ctrl->offset + 0x10; - } - - s3c24xx_clear_intc(intc); - s3c_intc[i] = intc; - } - - set_handle_irq(s3c24xx_handle_irq); - - return 0; -} - -static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { - { - .name = "intc", - .offset = 0, - }, { - .name = "subintc", - .offset = 0x18, - .parent = &s3c_intc[0], - } -}; - -static int __init s3c2410_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent) -{ - return s3c_init_intc_of(np, interrupt_parent, - s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); -} -IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); - -static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { - { - .name = "intc", - .offset = 0, - }, { - .name = "subintc", - .offset = 0x18, - .parent = &s3c_intc[0], - }, { - .name = "intc2", - .offset = 0x40, - } -}; - -static int __init s3c2416_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent) -{ - return s3c_init_intc_of(np, interrupt_parent, - s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); -} -IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); -#endif diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h deleted file mode 100644 index fecbf7e440c6..000000000000 --- a/arch/arm/mach-s3c/irqs-s3c24xx.h +++ /dev/null @@ -1,219 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - */ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - */ - -#define S3C2410_CPUIRQ_OFFSET (16) - -#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) - -/* main cpu interrupts */ -#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ -#define IRQ_EINT1 S3C2410_IRQ(1) -#define IRQ_EINT2 S3C2410_IRQ(2) -#define IRQ_EINT3 S3C2410_IRQ(3) -#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ -#define IRQ_EINT8t23 S3C2410_IRQ(5) -#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ -#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ -#define IRQ_BATT_FLT S3C2410_IRQ(7) -#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ -#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3 S3C2410_IRQ(13) -#define IRQ_TIMER4 S3C2410_IRQ(14) -#define IRQ_UART2 S3C2410_IRQ(15) -#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ -#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ -#define IRQ_DMA1 S3C2410_IRQ(18) -#define IRQ_DMA2 S3C2410_IRQ(19) -#define IRQ_DMA3 S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ -#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ -#define IRQ_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) -#define IRQ_ADCPARENT S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT0_2412 S3C2410_IRQ(32) -#define IRQ_EINT1_2412 S3C2410_IRQ(33) -#define IRQ_EINT2_2412 S3C2410_IRQ(34) -#define IRQ_EINT3_2412 S3C2410_IRQ(35) -#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ -#define IRQ_EINT5 S3C2410_IRQ(37) -#define IRQ_EINT6 S3C2410_IRQ(38) -#define IRQ_EINT7 S3C2410_IRQ(39) -#define IRQ_EINT8 S3C2410_IRQ(40) -#define IRQ_EINT9 S3C2410_IRQ(41) -#define IRQ_EINT10 S3C2410_IRQ(42) -#define IRQ_EINT11 S3C2410_IRQ(43) -#define IRQ_EINT12 S3C2410_IRQ(44) -#define IRQ_EINT13 S3C2410_IRQ(45) -#define IRQ_EINT14 S3C2410_IRQ(46) -#define IRQ_EINT15 S3C2410_IRQ(47) -#define IRQ_EINT16 S3C2410_IRQ(48) -#define IRQ_EINT17 S3C2410_IRQ(49) -#define IRQ_EINT18 S3C2410_IRQ(50) -#define IRQ_EINT19 S3C2410_IRQ(51) -#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ -#define IRQ_EINT21 S3C2410_IRQ(53) -#define IRQ_EINT22 S3C2410_IRQ(54) -#define IRQ_EINT23 S3C2410_IRQ(55) - -#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) -#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) - -#define IRQ_LCD_FIFO S3C2410_IRQ(56) -#define IRQ_LCD_FRAME S3C2410_IRQ(57) - -/* IRQs for the interal UARTs, and ADC - * these need to be ordered in number of appearance in the - * SUBSRC mask register -*/ - -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) - -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) -#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) - -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ -#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) -#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) - -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ -#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) -#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) - -#define IRQ_TC S3C2410_IRQSUB(9) -#define IRQ_ADC S3C2410_IRQSUB(10) - -#define NR_IRQS_S3C2410 (S3C2410_IRQSUB(10) + 1) - -/* extra irqs for s3c2412 */ - -#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) - -#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) -#define IRQ_S3C2412_CF S3C2410_IRQSUB(14) - -#define NR_IRQS_S3C2412 (S3C2410_IRQSUB(14) + 1) - -#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) -#define IRQ_S3C2416_DMA S3C2410_IRQ(17) -#define IRQ_S3C2416_UART3 S3C2410_IRQ(18) -#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20) -#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21) - -#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17) -#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23) -#define IRQ_S32416_WDT S3C2410_IRQSUB(27) -#define IRQ_S32416_AC97 S3C2410_IRQSUB(28) - -/* second interrupt-register of s3c2416/s3c2450 */ - -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) -#define IRQ_S3C2416_2D S3C2416_IRQ(0) -#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) -#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) -#define IRQ_S3C2416_RESERVED3 S3C2416_IRQ(3) -#define IRQ_S3C2416_PCM0 S3C2416_IRQ(4) -#define IRQ_S3C2416_PCM1 S3C2416_IRQ(5) -#define IRQ_S3C2416_I2S0 S3C2416_IRQ(6) -#define IRQ_S3C2416_I2S1 S3C2416_IRQ(7) - -#define NR_IRQS_S3C2416 (S3C2416_IRQ(7) + 1) - -/* extra irqs for s3c2440/s3c2442 */ - -#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ -#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ - -#define NR_IRQS_S3C2442 (S3C2410_IRQSUB(12) + 1) - -#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) -#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) - -#define NR_IRQS_S3C2440 (S3C2410_IRQSUB(14) + 1) - -/* irqs for s3c2443 */ - -#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ -#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ -#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ -#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ -#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ - -#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */ - -#define IRQ_HSMMC0 IRQ_S3C2416_HSMMC0 -#define IRQ_HSMMC1 IRQ_S3C2443_HSMMC - -#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) -#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) - -#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) - -/* UART3 */ -#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) -#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) -#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) - -#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) -#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) - -#define NR_IRQS_S3C2443 (S3C2410_IRQSUB(28) + 1) - -/* compatibility define. */ -#define IRQ_UART3 IRQ_S3C2443_UART3 -#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3 -#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 -#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 - -#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3 -#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2 - -#ifdef CONFIG_CPU_S3C2440 -#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97 -#else -#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97 -#endif - -/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ -#define FIQ_START IRQ_EINT0 - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c deleted file mode 100644 index f85e5885e9b4..000000000000 --- a/arch/arm/mach-s3c/mach-amlm5900.c +++ /dev/null @@ -1,248 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2006 American Microsystems Limited -// David Anders <danders@amltd.com> -// -// @History: -// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio/machine.h> -#include <linux/gpio.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/proc_fs.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/flash.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <linux/platform_data/fb-s3c2410.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include <linux/platform_data/i2c-s3c2410.h> -#include "devs.h" -#include "cpu.h" -#include "gpio-cfg.h" - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> - -#include "s3c24xx.h" - -static struct resource amlm5900_nor_resource = - DEFINE_RES_MEM(0x00000000, SZ_16M); - -static struct mtd_partition amlm5900_mtd_partitions[] = { - { - .name = "System", - .size = 0x240000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Kernel", - .size = 0x100000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "Ramdisk", - .size = 0x300000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "JFFS2", - .size = 0x9A0000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "Settings", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data amlm5900_flash_data = { - .width = 2, - .parts = amlm5900_mtd_partitions, - .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), -}; - -static struct platform_device amlm5900_device_nor = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &amlm5900_flash_data, - }, - .num_resources = 1, - .resource = &amlm5900_nor_resource, -}; - -static struct map_desc amlm5900_iodesc[] __initdata = { -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -static struct gpiod_lookup_table amlm5900_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device *amlm5900_devices[] __initdata = { -#ifdef CONFIG_FB_S3C2410 - &s3c_device_lcd, -#endif - &s3c_device_adc, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_ohci, - &s3c_device_rtc, - &s3c_device_usbgadget, - &s3c_device_sdi, - &amlm5900_device_nor, -}; - -static void __init amlm5900_map_io(void) -{ - s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init amlm5900_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -#ifdef CONFIG_FB_S3C2410 -static struct s3c2410fb_display __initdata amlm5900_lcd_info = { - .width = 160, - .height = 160, - - .type = S3C2410_LCDCON1_STN4, - - .pixclock = 680000, /* HCLK = 100MHz */ - .xres = 160, - .yres = 160, - .bpp = 4, - .left_margin = 1 << (4 + 3), - .right_margin = 8 << 3, - .hsync_len = 48, - .upper_margin = 0, - .lower_margin = 0, - - .lcdcon5 = 0x00000001, -}; - -static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = { - - .displays = &amlm5900_lcd_info, - .num_displays = 1, - .default_display = 0, - - .gpccon = 0xaaaaaaaa, - .gpccon_mask = 0xffffffff, - .gpccon_reg = S3C2410_GPCCON, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpcup_reg = S3C2410_GPCUP, - - .gpdcon = 0xaaaaaaaa, - .gpdcon_mask = 0xffffffff, - .gpdcon_reg = S3C2410_GPDCON, - .gpdup = 0x0000ffff, - .gpdup_mask = 0xffffffff, - .gpdup_reg = S3C2410_GPDUP, -}; -#endif - -static irqreturn_t -amlm5900_wake_interrupt(int irq, void *ignored) -{ - return IRQ_HANDLED; -} - -static void amlm5900_init_pm(void) -{ - int ret = 0; - - ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, - IRQF_TRIGGER_RISING | IRQF_SHARED, - "amlm5900_wakeup", &amlm5900_wake_interrupt); - if (ret != 0) { - printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); - } else { - enable_irq_wake(IRQ_EINT9); - /* configure the suspend/resume status pin */ - s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); - } -} -static void __init amlm5900_init(void) -{ - amlm5900_init_pm(); -#ifdef CONFIG_FB_S3C2410 - s3c24xx_fb_set_platdata(&amlm5900_fb_info); -#endif - s3c_i2c0_set_platdata(NULL); - gpiod_add_lookup_table(&amlm5900_mmc_gpio_table); - platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); -} - -MACHINE_START(AML_M5900, "AML_M5900") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = amlm5900_map_io, - .nr_irqs = NR_IRQS_S3C2410, - .init_irq = s3c2410_init_irq, - .init_machine = amlm5900_init, - .init_time = amlm5900_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c deleted file mode 100644 index 4536f3e66e27..000000000000 --- a/arch/arm/mach-s3c/mach-anubis.c +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2003-2009 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/sm501.h> -#include <linux/sm501-regs.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include <net/ax88796.h> - -#include "devs.h" -#include "cpu.h" -#include <linux/platform_data/asoc-s3c24xx_simtec.h> - -#include "anubis.h" -#include "s3c24xx.h" -#include "simtec.h" - -#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" - -static struct map_desc anubis_iodesc[] __initdata = { - /* ISA IO areas */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, - }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* CPLD control registers */ - - { - .virtual = (u32)ANUBIS_VA_CTRL1, - .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (u32)ANUBIS_VA_IDREG, - .pfn = __phys_to_pfn(ANUBIS_PA_IDREG), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, -}; - -/* NAND Flash on Anubis board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition __initdata anubis_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition __initdata anubis_default_nand_part_large[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_128K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_128K, - .offset = SZ_128K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Anubis has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set __initdata anubis_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, -}; - -static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(ANUBIS_VA_CTRL1); - tmp &= ~ANUBIS_CTRL1_NANDSEL; - tmp |= slot; - - pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); - - __raw_writeb(tmp, ANUBIS_VA_CTRL1); -} - -static struct s3c2410_platform_nand __initdata anubis_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(anubis_nand_sets), - .sets = anubis_nand_sets, - .select_chip = anubis_nand_select, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* IDE channels */ - -static struct pata_platform_info anubis_ide_platdata = { - .ioport_shift = 5, -}; - -static struct resource anubis_ide0_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32), - [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32), - [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), -}; - -static struct platform_device anubis_device_ide0 = { - .name = "pata_platform", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_ide0_resource), - .resource = anubis_ide0_resource, - .dev = { - .platform_data = &anubis_ide_platdata, - .coherent_dma_mask = ~0, - }, -}; - -static struct resource anubis_ide1_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32), - [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32), - [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), -}; - -static struct platform_device anubis_device_ide1 = { - .name = "pata_platform", - .id = 1, - .num_resources = ARRAY_SIZE(anubis_ide1_resource), - .resource = anubis_ide1_resource, - .dev = { - .platform_data = &anubis_ide_platdata, - .coherent_dma_mask = ~0, - }, -}; - -/* Asix AX88796 10/100 ethernet controller */ - -static struct ax_plat_data anubis_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2, - .dcr_val = 0x48, - .rcr_val = 0x40, -}; - -static struct resource anubis_asix_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20), - [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX), -}; - -static struct platform_device anubis_device_asix = { - .name = "ax88796", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_asix_resource), - .resource = anubis_asix_resource, - .dev = { - .platform_data = &anubis_asix_platdata, - } -}; - -/* SM501 */ - -static struct resource anubis_sm501_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M), - [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M), - [2] = DEFINE_RES_IRQ(IRQ_EINT0), -}; - -static struct sm501_initdata anubis_sm501_initdata = { - .gpio_high = { - .set = 0x3F000000, /* 24bit panel */ - .mask = 0x0, - }, - .misc_timing = { - .set = 0x010100, /* SDRAM timing */ - .mask = 0x1F1F00, - }, - .misc_control = { - .set = SM501_MISC_PNL_24BIT, - .mask = 0, - }, - - .devices = SM501_USE_GPIO, - - /* set the SDRAM and bus clocks */ - .mclk = 72 * MHZ, - .m1xclk = 144 * MHZ, -}; - -static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = { - [0] = { - .bus_num = 1, - .pin_scl = 44, - .pin_sda = 45, - }, - [1] = { - .bus_num = 2, - .pin_scl = 40, - .pin_sda = 41, - }, -}; - -static struct sm501_platdata anubis_sm501_platdata = { - .init = &anubis_sm501_initdata, - .gpio_base = -1, - .gpio_i2c = anubis_sm501_gpio_i2c, - .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c), -}; - -static struct platform_device anubis_device_sm501 = { - .name = "sm501", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_sm501_resource), - .resource = anubis_sm501_resource, - .dev = { - .platform_data = &anubis_sm501_platdata, - }, -}; - -/* Standard Anubis devices */ - -static struct platform_device *anubis_devices[] __initdata = { - &s3c2410_device_dclk, - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_adc, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &anubis_device_ide0, - &anubis_device_ide1, - &anubis_device_asix, - &anubis_device_sm501, -}; - -/* I2C devices. */ - -static struct i2c_board_info anubis_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tps65011", 0x48), - .irq = IRQ_EINT20, - } -}; - -/* Audio setup */ -static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { - .have_mic = 1, - .have_lout = 1, - .output_cdclk = 1, - .use_mpllin = 1, - .amp_gpio = S3C2410_GPB(2), - .amp_gain[0] = S3C2410_GPD(10), - .amp_gain[1] = S3C2410_GPD(11), -}; - -static void __init anubis_map_io(void) -{ - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); - - /* check for the newer revision boards with large page nand */ - - if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { - printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", - __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); - anubis_nand_sets[0].partitions = anubis_default_nand_part_large; - anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); - } else { - /* ensure that the GPIO is setup */ - gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPA(0)); - } -} - -static void __init anubis_init_time(void) -{ - s3c2440_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init anubis_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&anubis_nand_info); - simtec_audio_add(NULL, false, &anubis_audio); - - platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); - - i2c_register_board_info(0, anubis_i2c_devs, - ARRAY_SIZE(anubis_i2c_devs)); -} - - -MACHINE_START(ANUBIS, "Simtec-Anubis") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = anubis_map_io, - .init_machine = anubis_init, - .init_irq = s3c2440_init_irq, - .init_time = anubis_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c deleted file mode 100644 index 743403d873e0..000000000000 --- a/arch/arm/mach-s3c/mach-at2440evb.c +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> -// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> -// and modifications by SBZ <sbz@spgui.org> and -// Weibing <http://weibing.blogbus.com> -// -// For product information, visit http://www.arm.com/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio/machine.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/dm9000.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/platform_data/fb-s3c2410.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include "devs.h" -#include "cpu.h" -#include <linux/platform_data/mmc-s3cmci.h> - -#include "s3c24xx.h" - -static struct map_desc at2440evb_iodesc[] __initdata = { - /* Nothing here */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - -static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, -}; - -/* NAND Flash on AT2440EVB board */ - -static struct mtd_partition __initdata at2440evb_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_256K, - .offset = 0, - }, - [1] = { - .name = "Kernel", - .size = SZ_2M, - .offset = SZ_256K, - }, - [2] = { - .name = "Root", - .offset = SZ_256K + SZ_2M, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { - [0] = { - .name = "nand", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part), - .partitions = at2440evb_default_nand_part, - }, -}; - -static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(at2440evb_nand_sets), - .sets = at2440evb_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* DM9000AEP 10/100 ethernet controller */ - -static struct resource at2440evb_dm9k_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS3, 4), - [1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4), - [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHEDGE), -}; - -static struct dm9000_plat_data at2440evb_dm9k_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), -}; - -static struct platform_device at2440evb_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource), - .resource = at2440evb_dm9k_resource, - .dev = { - .platform_data = &at2440evb_dm9k_pdata, - }, -}; - -static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { - .set_power = s3c24xx_mci_def_set_power, -}; - -static struct gpiod_lookup_table at2440evb_mci_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* Card detect S3C2410_GPG(10) */ - GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW), - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - - -/* 7" LCD panel */ - -static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = { - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - - .width = 800, - .height = 480, - - .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */ - .xres = 800, - .yres = 480, - .bpp = 16, - .left_margin = 88, - .right_margin = 40, - .hsync_len = 128, - .upper_margin = 32, - .lower_margin = 11, - .vsync_len = 2, -}; - -static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { - .displays = &at2440evb_lcd_cfg, - .num_displays = 1, - .default_display = 0, -}; - -static struct platform_device *at2440evb_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_adc, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_sdi, - &s3c_device_lcd, - &at2440evb_device_eth, -}; - -static void __init at2440evb_map_io(void) -{ - s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init at2440evb_init_time(void) -{ - s3c2440_init_clocks(16934400); - s3c24xx_timer_init(); -} - -static void __init at2440evb_init(void) -{ - s3c24xx_fb_set_platdata(&at2440evb_fb_info); - gpiod_add_lookup_table(&at2440evb_mci_gpio_table); - s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); - s3c_nand_set_platdata(&at2440evb_nand_info); - s3c_i2c0_set_platdata(NULL); - - platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); -} - - -MACHINE_START(AT2440EVB, "AT2440EVB") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = at2440evb_map_io, - .init_machine = at2440evb_init, - .init_irq = s3c2440_init_irq, - .init_time = at2440evb_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c deleted file mode 100644 index a33ceab81e09..000000000000 --- a/arch/arm/mach-s3c/mach-bast.c +++ /dev/null @@ -1,583 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2003-2008 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.simtec.co.uk/products/EB2410ITX/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/dm9000.h> -#include <linux/ata_platform.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/serial_8250.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include <linux/platform_data/asoc-s3c24xx_simtec.h> -#include <linux/platform_data/hwmon-s3c.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> - -#include <net/ax88796.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/fb-s3c2410.h> -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "cpu.h" -#include <linux/soc/samsung/s3c-cpu-freq.h> -#include "devs.h" -#include "gpio-cfg.h" - -#include "bast.h" -#include "s3c24xx.h" -#include "simtec.h" - -#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" - -/* macros for virtual address mods for the io space entries */ -#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) -#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4) -#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3) -#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2) - -/* macros to modify the physical addresses for io space */ - -#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) -#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) -#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) -#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) - -static struct map_desc bast_iodesc[] __initdata = { - /* ISA IO areas */ - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = PA_CS2(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, - }, - /* bast CPLD control registers, and external interrupt controls */ - { - .virtual = (u32)BAST_VA_CTRL1, - .pfn = __phys_to_pfn(BAST_PA_CTRL1), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL2, - .pfn = __phys_to_pfn(BAST_PA_CTRL2), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL3, - .pfn = __phys_to_pfn(BAST_PA_CTRL3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL4, - .pfn = __phys_to_pfn(BAST_PA_CTRL4), - .length = SZ_1M, - .type = MT_DEVICE, - }, - /* PC104 IRQ mux */ - { - .virtual = (u32)BAST_VA_PC104_IRQREQ, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_PC104_IRQRAW, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_PC104_IRQMASK, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), - .length = SZ_1M, - .type = MT_DEVICE, - }, - - /* peripheral space... one for each of fast/slow/byte/16bit */ - /* note, ide is only decoded in word space, even though some registers - * are only 8bit */ - - /* slow, byte */ - { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* slow, word */ - { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* fast, byte */ - { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* fast, word */ - { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - /* port 2 is not actually used */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NAND Flash on BAST board */ - -#ifdef CONFIG_PM -static int bast_pm_suspend(void) -{ - /* ensure that an nRESET is not generated on resume. */ - gpio_direction_output(S3C2410_GPA(21), 1); - return 0; -} - -static void bast_pm_resume(void) -{ - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); -} - -#else -#define bast_pm_suspend NULL -#define bast_pm_resume NULL -#endif - -static struct syscore_ops bast_pm_syscore_ops = { - .suspend = bast_pm_suspend, - .resume = bast_pm_resume, -}; - -static int smartmedia_map[] = { 0 }; -static int chip0_map[] = { 1 }; -static int chip1_map[] = { 2 }; -static int chip2_map[] = { 3 }; - -static struct mtd_partition __initdata bast_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user", - .offset = SZ_4M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the bast has 4 selectable slots for nand-flash, the three - * on-board chip areas, as well as the external SmartMedia - * slot. - * - * Note, there is no current hot-plug support for the SmartMedia - * socket. -*/ - -static struct s3c2410_nand_set __initdata bast_nand_sets[] = { - [0] = { - .name = "SmartMedia", - .nr_chips = 1, - .nr_map = smartmedia_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [1] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [3] = { - .name = "chip2", - .nr_chips = 1, - .nr_map = chip2_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - } -}; - -static void bast_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("bast_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(BAST_VA_CTRL2); - tmp &= BAST_CPLD_CTLR2_IDERST; - tmp |= slot; - tmp |= BAST_CPLD_CTRL2_WNAND; - - pr_debug("bast_nand: ctrl2 now %02x\n", tmp); - - __raw_writeb(tmp, BAST_VA_CTRL2); -} - -static struct s3c2410_platform_nand __initdata bast_nand_info = { - .tacls = 30, - .twrph0 = 60, - .twrph1 = 60, - .nr_sets = ARRAY_SIZE(bast_nand_sets), - .sets = bast_nand_sets, - .select_chip = bast_nand_select, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* DM9000 */ - -static struct resource bast_dm9k_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4), - [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHLEVEL), -}; - -/* for the moment we limit ourselves to 16bit IO until some - * better IO routines can be written and tested -*/ - -static struct dm9000_plat_data bast_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device bast_device_dm9k = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(bast_dm9k_resource), - .resource = bast_dm9k_resource, - .dev = { - .platform_data = &bast_dm9k_platdata, - } -}; - -/* serial devices */ - -#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) -#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ) -#define SERIAL_CLK (1843200) - -static struct plat_serial8250_port bast_sio_data[] = { - [0] = { - .mapbase = SERIAL_BASE + 0x2f8, - .irq = BAST_IRQ_PCSERIAL1, - .flags = SERIAL_FLAGS, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = SERIAL_CLK, - }, - [1] = { - .mapbase = SERIAL_BASE + 0x3f8, - .irq = BAST_IRQ_PCSERIAL2, - .flags = SERIAL_FLAGS, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = SERIAL_CLK, - }, - { } -}; - -static struct platform_device bast_sio = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = &bast_sio_data, - }, -}; - -/* we have devices on the bus which cannot work much over the - * standard 100KHz i2c bus frequency -*/ - -static struct s3c2410_platform_i2c __initdata bast_i2c_info = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, -}; - -/* Asix AX88796 10/100 ethernet controller */ - -static struct ax_plat_data bast_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2, - .dcr_val = 0x48, - .rcr_val = 0x40, -}; - -static struct resource bast_asix_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20), - [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1), - [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX), -}; - -static struct platform_device bast_device_asix = { - .name = "ax88796", - .id = 0, - .num_resources = ARRAY_SIZE(bast_asix_resource), - .resource = bast_asix_resource, - .dev = { - .platform_data = &bast_asix_platdata - } -}; - -/* Asix AX88796 10/100 ethernet controller parallel port */ - -static struct resource bast_asixpp_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \ - 0x30 * 0x20), -}; - -static struct platform_device bast_device_axpp = { - .name = "ax88796-pp", - .id = 0, - .num_resources = ARRAY_SIZE(bast_asixpp_resource), - .resource = bast_asixpp_resource, -}; - -/* LCD/VGA controller */ - -static struct s3c2410fb_display __initdata bast_lcd_info[] = { - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 4, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 8, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 16, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, -}; - -/* LCD/VGA controller */ - -static struct s3c2410fb_mach_info __initdata bast_fb_info = { - - .displays = bast_lcd_info, - .num_displays = ARRAY_SIZE(bast_lcd_info), - .default_display = 1, -}; - -/* I2C devices fitted. */ - -static struct i2c_board_info bast_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, { - I2C_BOARD_INFO("simtec-pmu", 0x6b), - }, { - I2C_BOARD_INFO("ch7013", 0x75), - }, -}; - -static struct s3c_hwmon_pdata bast_hwmon_info = { - /* LCD contrast (0-6.6V) */ - .in[0] = &(struct s3c_hwmon_chcfg) { - .name = "lcd-contrast", - .mult = 3300, - .div = 512, - }, - /* LED current feedback */ - .in[1] = &(struct s3c_hwmon_chcfg) { - .name = "led-feedback", - .mult = 3300, - .div = 1024, - }, - /* LCD feedback (0-6.6V) */ - .in[2] = &(struct s3c_hwmon_chcfg) { - .name = "lcd-feedback", - .mult = 3300, - .div = 512, - }, - /* Vcore (1.8-2.0V), Vref 3.3V */ - .in[3] = &(struct s3c_hwmon_chcfg) { - .name = "vcore", - .mult = 3300, - .div = 1024, - }, -}; - -/* Standard BAST devices */ -// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 - -static struct platform_device *bast_devices[] __initdata = { - &s3c2410_device_dclk, - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_adc, - &s3c_device_hwmon, - &bast_device_dm9k, - &bast_device_asix, - &bast_device_axpp, - &bast_sio, -}; - -static struct s3c_cpufreq_board __initdata bast_cpufreq = { - .refresh = 7800, /* 7.8usec */ - .auto_io = 1, - .need_io = 1, -}; - -static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { - .have_mic = 1, - .have_lout = 1, -}; - -static void __init bast_map_io(void) -{ - s3c_hwmon_set_platdata(&bast_hwmon_info); - - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init bast_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init bast_init(void) -{ - register_syscore_ops(&bast_pm_syscore_ops); - - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c_nand_set_platdata(&bast_nand_info); - s3c24xx_fb_set_platdata(&bast_fb_info); - platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); - - i2c_register_board_info(0, bast_i2c_devs, - ARRAY_SIZE(bast_i2c_devs)); - - usb_simtec_init(); - nor_simtec_init(); - simtec_audio_add(NULL, true, &bast_audio); - - WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); - - s3c_cpufreq_setboard(&bast_cpufreq); -} - -MACHINE_START(BAST, "Simtec-BAST") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = bast_map_io, - .init_irq = s3c2410_init_irq, - .init_machine = bast_init, - .init_time = bast_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c deleted file mode 100644 index d50a81d85ae1..000000000000 --- a/arch/arm/mach-s3c/mach-gta02.c +++ /dev/null @@ -1,588 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. -// -// Copyright (C) 2006-2009 by Openmoko, Inc. -// Authors: Harald Welte <laforge@openmoko.org> -// Andy Green <andy@openmoko.org> -// Werner Almesberger <werner@openmoko.org> -// All rights reserved. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio/machine.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/workqueue.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/i2c.h> - -#include <linux/mmc/host.h> - -#include <linux/mfd/pcf50633/adc.h> -#include <linux/mfd/pcf50633/backlight.h> -#include <linux/mfd/pcf50633/core.h> -#include <linux/mfd/pcf50633/gpio.h> -#include <linux/mfd/pcf50633/mbc.h> -#include <linux/mfd/pcf50633/pmic.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#include <linux/regulator/machine.h> - -#include <linux/spi/spi.h> -#include <linux/spi/s3c24xx.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/usb-ohci-s3c2410.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/fb-s3c2410.h> - -#include "regs-gpio.h" -#include "regs-irq.h" -#include "gpio-samsung.h" - -#include "cpu.h" -#include "devs.h" -#include "gpio-cfg.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "gta02.h" - -static struct pcf50633 *gta02_pcf; - -/* - * This gets called frequently when we paniced. - */ - -static long gta02_panic_blink(int state) -{ - char led; - - led = (state) ? 1 : 0; - gpio_direction_output(GTA02_GPIO_AUX_LED, led); - - return 0; -} - - -static struct map_desc gta02_iodesc[] __initdata = { - { - .virtual = 0xe0000000, - .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000), - .length = SZ_1M, - .type = MT_DEVICE - }, -}; - -#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN) -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - -static struct s3c2410_uartcfg gta02_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -#ifdef CONFIG_CHARGER_PCF50633 -/* - * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. - * We use this to recognize that we can pull 1A from the USB socket. - * - * These constants are the measured pcf50633 ADC levels with the 1A - * charger / 48K resistor, and with no pulldown resistor. - */ - -#define ADC_NOM_CHG_DETECT_1A 6 -#define ADC_NOM_CHG_DETECT_USB 43 - -#ifdef CONFIG_PCF50633_ADC -static void -gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) -{ - int ma; - - /* Interpret charger type */ - if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { - - /* - * Sanity - stop GPO driving out now that we have a 1A charger - * GPO controls USB Host power generation on GTA02 - */ - pcf50633_gpio_set(pcf, PCF50633_GPO, 0); - - ma = 1000; - } else - ma = 100; - - pcf50633_mbc_usb_curlim_set(pcf, ma); -} -#endif - -static struct delayed_work gta02_charger_work; -static int gta02_usb_vbus_draw; - -static void gta02_charger_worker(struct work_struct *work) -{ - if (gta02_usb_vbus_draw) { - pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw); - return; - } - -#ifdef CONFIG_PCF50633_ADC - pcf50633_adc_async_read(gta02_pcf, - PCF50633_ADCC1_MUX_ADCIN1, - PCF50633_ADCC1_AVERAGE_16, - gta02_configure_pmu_for_charger, - NULL); -#else - /* - * If the PCF50633 ADC is disabled we fallback to a - * 100mA limit for safety. - */ - pcf50633_mbc_usb_curlim_set(gta02_pcf, 100); -#endif -} - -#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) - -static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) -{ - if (irq == PCF50633_IRQ_USBINS) { - schedule_delayed_work(>a02_charger_work, - GTA02_CHARGER_CONFIGURE_TIMEOUT); - - return; - } - - if (irq == PCF50633_IRQ_USBREM) { - cancel_delayed_work_sync(>a02_charger_work); - gta02_usb_vbus_draw = 0; - } -} - -static void gta02_udc_vbus_draw(unsigned int ma) -{ - if (!gta02_pcf) - return; - - gta02_usb_vbus_draw = ma; - - schedule_delayed_work(>a02_charger_work, - GTA02_CHARGER_CONFIGURE_TIMEOUT); -} -#else /* !CONFIG_CHARGER_PCF50633 */ -#define gta02_pmu_event_callback NULL -#define gta02_udc_vbus_draw NULL -#endif - -static char *gta02_batteries[] = { - "battery", -}; - -static struct pcf50633_bl_platform_data gta02_backlight_data = { - .default_brightness = 0x3f, - .default_brightness_limit = 0, - .ramp_time = 5, -}; - -static struct pcf50633_platform_data gta02_pcf_pdata = { - .resumers = { - [0] = PCF50633_INT1_USBINS | - PCF50633_INT1_USBREM | - PCF50633_INT1_ALARM, - [1] = PCF50633_INT2_ONKEYF, - [2] = PCF50633_INT3_ONKEY1S, - [3] = PCF50633_INT4_LOWSYS | - PCF50633_INT4_LOWBAT | - PCF50633_INT4_HIGHTMP, - }, - - .batteries = gta02_batteries, - .num_batteries = ARRAY_SIZE(gta02_batteries), - - .charger_reference_current_ma = 1000, - - .backlight_data = >a02_backlight_data, - - .reg_init_data = { - [PCF50633_REGULATOR_AUTO] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_DOWN1] = { - .constraints = { - .min_uV = 1300000, - .max_uV = 1600000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_DOWN2] = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - }, - }, - [PCF50633_REGULATOR_HCLDO] = { - .constraints = { - .min_uV = 2000000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - }, - [PCF50633_REGULATOR_LDO1] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO2] = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO3] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO4] = { - .constraints = { - .min_uV = 3200000, - .max_uV = 3200000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO5] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - }, - [PCF50633_REGULATOR_LDO6] = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - }, - [PCF50633_REGULATOR_MEMLDO] = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - }, - - }, - .mbc_event_callback = gta02_pmu_event_callback, -}; - - -/* NOR Flash. */ - -#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ -#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ - -static struct physmap_flash_data gta02_nor_flash_data = { - .width = 2, -}; - -static struct resource gta02_nor_flash_resource = - DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE); - -static struct platform_device gta02_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = >a02_nor_flash_data, - }, - .resource = >a02_nor_flash_resource, - .num_resources = 1, -}; - - -static struct platform_device s3c24xx_pwm_device = { - .name = "s3c24xx_pwm", - .num_resources = 0, -}; - -static struct platform_device gta02_dfbmcs320_device = { - .name = "dfbmcs320", -}; - -static struct i2c_board_info gta02_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf50633", 0x73), - .irq = GTA02_IRQ_PCF50633, - .platform_data = >a02_pcf_pdata, - }, - { - I2C_BOARD_INFO("wm8753", 0x1a), - }, -}; - -static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { - [0] = { - /* - * This name is also hard-coded in the boot loaders, so - * changing it would would require all users to upgrade - * their boot loaders, some of which are stored in a NOR - * that is considered to be immutable. - */ - .name = "neo1973-nand", - .nr_chips = 1, - .flash_bbt = 1, - }, -}; - -/* - * Choose a set of timings derived from S3C@2442B MCP54 - * data sheet (K5D2G13ACM-D075 MCP Memory). - */ - -static struct s3c2410_platform_nand __initdata gta02_nand_info = { - .tacls = 0, - .twrph0 = 25, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(gta02_nand_sets), - .sets = gta02_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - - -/* Get PMU to set USB current limit accordingly. */ -static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { - .vbus_draw = gta02_udc_vbus_draw, -}; - -static struct gpiod_lookup_table gta02_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* USB */ -static struct s3c2410_hcd_info gta02_usb_info __initdata = { - .port[0] = { - .flags = S3C_HCDFLG_USED, - }, - .port[1] = { - .flags = 0, - }, -}; - -/* Touchscreen */ -static struct s3c2410_ts_mach_info gta02_ts_info = { - .delay = 10000, - .presc = 0xff, /* slow as we can go */ - .oversampling_shift = 2, -}; - -/* Buttons */ -static struct gpio_keys_button gta02_buttons[] = { - { - .gpio = GTA02_GPIO_AUX_KEY, - .code = KEY_PHONE, - .desc = "Aux", - .type = EV_KEY, - .debounce_interval = 100, - }, - { - .gpio = GTA02_GPIO_HOLD_KEY, - .code = KEY_PAUSE, - .desc = "Hold", - .type = EV_KEY, - .debounce_interval = 100, - }, -}; - -static struct gpio_keys_platform_data gta02_buttons_pdata = { - .buttons = gta02_buttons, - .nbuttons = ARRAY_SIZE(gta02_buttons), -}; - -static struct platform_device gta02_buttons_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = >a02_buttons_pdata, - }, -}; - -static struct gpiod_lookup_table gta02_audio_gpio_table = { - .dev_id = "neo1973-audio", - .table = { - GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device gta02_audio = { - .name = "neo1973-audio", - .id = -1, -}; - -static struct gpiod_lookup_table gta02_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static void __init gta02_map_io(void) -{ - s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - - -/* These are the guys that don't need to be children of PMU. */ - -static struct platform_device *gta02_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_sdi, - &s3c_device_usbgadget, - &s3c_device_nand, - >a02_nor_flash, - &s3c24xx_pwm_device, - &s3c_device_iis, - &s3c_device_i2c0, - >a02_dfbmcs320_device, - >a02_buttons_device, - &s3c_device_adc, - &s3c_device_ts, - >a02_audio, -}; - -static void gta02_poweroff(void) -{ - pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); -} - -static void __init gta02_machine_init(void) -{ - /* Set the panic callback to turn AUX LED on or off. */ - panic_blink = gta02_panic_blink; - - s3c_pm_init(); - -#ifdef CONFIG_CHARGER_PCF50633 - INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); -#endif - - s3c24xx_udc_set_platdata(>a02_udc_cfg); - s3c24xx_ts_set_platdata(>a02_ts_info); - s3c_ohci_set_platdata(>a02_usb_info); - s3c_nand_set_platdata(>a02_nand_info); - s3c_i2c0_set_platdata(NULL); - - i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - gpiod_add_lookup_table(>a02_udc_gpio_table); - gpiod_add_lookup_table(>a02_audio_gpio_table); - gpiod_add_lookup_table(>a02_mmc_gpio_table); - platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); - pm_power_off = gta02_poweroff; - - regulator_has_full_constraints(); -} - -static void __init gta02_init_time(void) -{ - s3c2442_init_clocks(12000000); - s3c24xx_timer_init(); -} - -MACHINE_START(NEO1973_GTA02, "GTA02") - /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2442, - .map_io = gta02_map_io, - .init_irq = s3c2442_init_irq, - .init_machine = gta02_machine_init, - .init_time = gta02_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c deleted file mode 100644 index 83ac6cfdb1d8..000000000000 --- a/arch/arm/mach-s3c/mach-h1940.c +++ /dev/null @@ -1,809 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2003-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// https://www.handhelds.org/projects/h1940.html - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/memblock.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/pda_power.h> -#include <linux/s3c_adc_battery.h> -#include <linux/delay.h> - -#include <video/platform_lcd.h> - -#include <linux/mmc/host.h> -#include <linux/export.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/usb-s3c2410_udc.h> - -#include <sound/uda1380.h> - -#include <linux/platform_data/fb-s3c2410.h> -#include "map.h" -#include "hardware-s3c24xx.h" -#include "regs-clock.h" -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "cpu.h" -#include "devs.h" -#include "gpio-cfg.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "h1940.h" - -#define H1940_LATCH ((void __force __iomem *)0xF8000000) - -#define H1940_PA_LATCH S3C2410_CS2 - -#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END)) - -#define S3C24XX_PLL_MDIV_SHIFT (12) -#define S3C24XX_PLL_PDIV_SHIFT (4) -#define S3C24XX_PLL_SDIV_SHIFT (0) - -static struct map_desc h1940_iodesc[] __initdata = { - [0] = { - .virtual = (unsigned long)H1940_LATCH, - .pfn = __phys_to_pfn(H1940_PA_LATCH), - .length = SZ_16K, - .type = MT_DEVICE - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x245, - .ulcon = 0x03, - .ufcon = 0x00, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .uart_flags = UPF_CONS_FLOW, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - -/* Board control latch control */ - -static unsigned int latch_state; - -static void h1940_latch_control(unsigned int clear, unsigned int set) -{ - unsigned long flags; - - local_irq_save(flags); - - latch_state &= ~clear; - latch_state |= set; - - __raw_writel(latch_state, H1940_LATCH); - - local_irq_restore(flags); -} - -static inline int h1940_gpiolib_to_latch(int offset) -{ - return 1 << (offset + 16); -} - -static void h1940_gpiolib_latch_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - int latch_bit = h1940_gpiolib_to_latch(offset); - - h1940_latch_control(value ? 0 : latch_bit, - value ? latch_bit : 0); -} - -static int h1940_gpiolib_latch_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - h1940_gpiolib_latch_set(chip, offset, value); - return 0; -} - -static int h1940_gpiolib_latch_get(struct gpio_chip *chip, - unsigned offset) -{ - return (latch_state >> (offset + 16)) & 1; -} - -static struct gpio_chip h1940_latch_gpiochip = { - .base = H1940_LATCH_GPIO(0), - .owner = THIS_MODULE, - .label = "H1940_LATCH", - .ngpio = 16, - .direction_output = h1940_gpiolib_latch_output, - .set = h1940_gpiolib_latch_set, - .get = h1940_gpiolib_latch_get, -}; - -static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table h1940_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, - .cfg_gpio = s3c24xx_ts_cfg_gpio, -}; - -/* - * Set lcd on or off - */ -static struct s3c2410fb_display h1940_lcd __initdata = { - .lcdcon5= S3C2410_LCDCON5_FRM565 | \ - S3C2410_LCDCON5_INVVLINE | \ - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .pixclock = 260000, - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 8, - .right_margin = 20, - .hsync_len = 4, - .upper_margin = 8, - .lower_margin = 7, - .vsync_len = 1, -}; - -static struct s3c2410fb_mach_info h1940_fb_info __initdata = { - .displays = &h1940_lcd, - .num_displays = 1, - .default_display = 0, - - .lpcsel = 0x02, - .gpccon = 0xaa940659, - .gpccon_mask = 0xffffc0f0, - .gpccon_reg = S3C2410_GPCCON, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpcup_reg = S3C2410_GPCUP, - .gpdcon = 0xaa84aaa0, - .gpdcon_mask = 0xffffffff, - .gpdcon_reg = S3C2410_GPDCON, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, - .gpdup_reg = S3C2410_GPDUP, -}; - -static int power_supply_init(struct device *dev) -{ - return gpio_request(S3C2410_GPF(2), "cable plugged"); -} - -static int h1940_is_ac_online(void) -{ - return !gpio_get_value(S3C2410_GPF(2)); -} - -static void power_supply_exit(struct device *dev) -{ - gpio_free(S3C2410_GPF(2)); -} - -static char *h1940_supplicants[] = { - "main-battery", - "backup-battery", -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = h1940_is_ac_online, - .exit = power_supply_exit, - .supplied_to = h1940_supplicants, - .num_supplicants = ARRAY_SIZE(h1940_supplicants), -}; - -static struct resource power_supply_resources[] = { - [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \ - | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = - &power_supply_info, - }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), -}; - -static const struct s3c_adc_bat_thresh bat_lut_noac[] = { - { .volt = 4070, .cur = 162, .level = 100}, - { .volt = 4040, .cur = 165, .level = 95}, - { .volt = 4016, .cur = 164, .level = 90}, - { .volt = 3996, .cur = 166, .level = 85}, - { .volt = 3971, .cur = 168, .level = 80}, - { .volt = 3951, .cur = 168, .level = 75}, - { .volt = 3931, .cur = 170, .level = 70}, - { .volt = 3903, .cur = 172, .level = 65}, - { .volt = 3886, .cur = 172, .level = 60}, - { .volt = 3858, .cur = 176, .level = 55}, - { .volt = 3842, .cur = 176, .level = 50}, - { .volt = 3818, .cur = 176, .level = 45}, - { .volt = 3789, .cur = 180, .level = 40}, - { .volt = 3769, .cur = 180, .level = 35}, - { .volt = 3749, .cur = 184, .level = 30}, - { .volt = 3732, .cur = 184, .level = 25}, - { .volt = 3716, .cur = 184, .level = 20}, - { .volt = 3708, .cur = 184, .level = 15}, - { .volt = 3716, .cur = 96, .level = 10}, - { .volt = 3700, .cur = 96, .level = 5}, - { .volt = 3684, .cur = 96, .level = 0}, -}; - -static const struct s3c_adc_bat_thresh bat_lut_acin[] = { - { .volt = 4130, .cur = 0, .level = 100}, - { .volt = 3982, .cur = 0, .level = 50}, - { .volt = 3854, .cur = 0, .level = 10}, - { .volt = 3841, .cur = 0, .level = 0}, -}; - -static struct gpiod_lookup_table h1940_bat_gpio_table = { - .dev_id = "s3c-adc-battery", - .table = { - /* Charge status S3C2410_GPF(3) */ - GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static int h1940_bat_init(void) -{ - int ret; - - ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable"); - if (ret) - return ret; - gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0); - - return 0; - -} - -static void h1940_bat_exit(void) -{ - gpio_free(H1940_LATCH_SM803_ENABLE); -} - -static void h1940_enable_charger(void) -{ - gpio_set_value(H1940_LATCH_SM803_ENABLE, 1); -} - -static void h1940_disable_charger(void) -{ - gpio_set_value(H1940_LATCH_SM803_ENABLE, 0); -} - -static struct s3c_adc_bat_pdata h1940_bat_cfg = { - .init = h1940_bat_init, - .exit = h1940_bat_exit, - .enable_charger = h1940_enable_charger, - .disable_charger = h1940_disable_charger, - .lut_noac = bat_lut_noac, - .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), - .lut_acin = bat_lut_acin, - .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), - .volt_channel = 0, - .current_channel = 1, - .volt_mult = 4056, - .current_mult = 1893, - .internal_impedance = 200, - .backup_volt_channel = 3, - /* TODO Check backup volt multiplier */ - .backup_volt_mult = 4056, - .backup_volt_min = 0, - .backup_volt_max = 4149288 -}; - -static struct platform_device h1940_battery = { - .name = "s3c-adc-battery", - .id = -1, - .dev = { - .parent = &s3c_device_adc.dev, - .platform_data = &h1940_bat_cfg, - }, -}; - -static DEFINE_SPINLOCK(h1940_blink_spin); - -int h1940_led_blink_set(struct gpio_desc *desc, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - int blink_gpio, check_gpio1, check_gpio2; - int gpio = desc ? desc_to_gpio(desc) : -EINVAL; - - switch (gpio) { - case H1940_LATCH_LED_GREEN: - blink_gpio = S3C2410_GPA(7); - check_gpio1 = S3C2410_GPA(1); - check_gpio2 = S3C2410_GPA(3); - break; - case H1940_LATCH_LED_RED: - blink_gpio = S3C2410_GPA(1); - check_gpio1 = S3C2410_GPA(7); - check_gpio2 = S3C2410_GPA(3); - break; - default: - blink_gpio = S3C2410_GPA(3); - check_gpio1 = S3C2410_GPA(1); - check_gpio2 = S3C2410_GPA(7); - break; - } - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = 500; - - spin_lock(&h1940_blink_spin); - - switch (state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - if (!gpio_get_value(check_gpio1) && - !gpio_get_value(check_gpio2)) - gpio_set_value(H1940_LATCH_LED_FLASH, 0); - gpio_set_value(blink_gpio, 0); - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, 0); - gpio_set_value(H1940_LATCH_LED_FLASH, 1); - gpio_set_value(blink_gpio, 1); - break; - } - - spin_unlock(&h1940_blink_spin); - - return 0; -} -EXPORT_SYMBOL(h1940_led_blink_set); - -static struct gpio_led h1940_leds_desc[] = { - { - .name = "Green", - .default_trigger = "main-battery-full", - .gpio = H1940_LATCH_LED_GREEN, - .retain_state_suspended = 1, - }, - { - .name = "Red", - .default_trigger - = "main-battery-charging-blink-full-solid", - .gpio = H1940_LATCH_LED_RED, - .retain_state_suspended = 1, - }, -}; - -static struct gpio_led_platform_data h1940_leds_pdata = { - .num_leds = ARRAY_SIZE(h1940_leds_desc), - .leds = h1940_leds_desc, - .gpio_blink_set = h1940_led_blink_set, -}; - -static struct platform_device h1940_device_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h1940_leds_pdata, - }, -}; - -static struct platform_device h1940_device_bluetooth = { - .name = "h1940-bt", - .id = -1, -}; - -static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd) -{ - s3c24xx_mci_def_set_power(power_mode, vdd); - - switch (power_mode) { - case MMC_POWER_OFF: - gpio_set_value(H1940_LATCH_SD_POWER, 0); - break; - case MMC_POWER_UP: - case MMC_POWER_ON: - gpio_set_value(H1940_LATCH_SD_POWER, 1); - break; - default: - break; - } -} - -static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { - .set_power = h1940_set_mmc_power, - .ocr_avail = MMC_VDD_32_33, -}; - -static struct gpiod_lookup_table h1940_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* Card detect S3C2410_GPF(5) */ - GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW), - /* Write protect S3C2410_GPH(8) */ - GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW), - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table h1940_audio_gpio_table = { - .dev_id = "h1940-audio", - .table = { - GPIO_LOOKUP("H1940_LATCH", - H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0), - "speaker-power", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device h1940_audio = { - .name = "h1940-audio", - .id = -1, -}; - -static struct pwm_lookup h1940_pwm_lookup[] = { - PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296, - PWM_POLARITY_NORMAL), -}; - -static int h1940_backlight_init(struct device *dev) -{ - gpio_request(S3C2410_GPB(0), "Backlight"); - - gpio_direction_output(S3C2410_GPB(0), 0); - s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); - gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1); - - return 0; -} - -static int h1940_backlight_notify(struct device *dev, int brightness) -{ - if (!brightness) { - gpio_direction_output(S3C2410_GPB(0), 1); - gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0); - } else { - gpio_direction_output(S3C2410_GPB(0), 0); - s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); - gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1); - } - return brightness; -} - -static void h1940_backlight_exit(struct device *dev) -{ - gpio_direction_output(S3C2410_GPB(0), 1); - gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0); -} - - -static struct platform_pwm_backlight_data backlight_data = { - .max_brightness = 100, - .dft_brightness = 50, - .init = h1940_backlight_init, - .notify = h1940_backlight_notify, - .exit = h1940_backlight_exit, -}; - -static struct platform_device h1940_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &samsung_device_pwm.dev, - .platform_data = &backlight_data, - }, - .id = -1, -}; - -static void h1940_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - int value, retries = 100; - - if (!power) { - gpio_set_value(S3C2410_GPC(0), 0); - /* wait for 3ac */ - do { - value = gpio_get_value(S3C2410_GPC(6)); - } while (value && retries--); - - gpio_set_value(H1940_LATCH_LCD_P2, 0); - gpio_set_value(H1940_LATCH_LCD_P3, 0); - gpio_set_value(H1940_LATCH_LCD_P4, 0); - - gpio_direction_output(S3C2410_GPC(1), 0); - gpio_direction_output(S3C2410_GPC(4), 0); - - gpio_set_value(H1940_LATCH_LCD_P1, 0); - gpio_set_value(H1940_LATCH_LCD_P0, 0); - - gpio_set_value(S3C2410_GPC(5), 0); - - } else { - gpio_set_value(H1940_LATCH_LCD_P0, 1); - gpio_set_value(H1940_LATCH_LCD_P1, 1); - - gpio_direction_input(S3C2410_GPC(1)); - gpio_direction_input(S3C2410_GPC(4)); - mdelay(10); - s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2)); - - gpio_set_value(S3C2410_GPC(5), 1); - gpio_set_value(S3C2410_GPC(0), 1); - - gpio_set_value(H1940_LATCH_LCD_P3, 1); - gpio_set_value(H1940_LATCH_LCD_P2, 1); - gpio_set_value(H1940_LATCH_LCD_P4, 1); - } -} - -static struct plat_lcd_data h1940_lcd_power_data = { - .set_power = h1940_lcd_power_set, -}; - -static struct platform_device h1940_lcd_powerdev = { - .name = "platform-lcd", - .dev.parent = &s3c_device_lcd.dev, - .dev.platform_data = &h1940_lcd_power_data, -}; - -static struct uda1380_platform_data uda1380_info = { - .gpio_power = H1940_LATCH_UDA_POWER, - .gpio_reset = S3C2410_GPA(12), - .dac_clk = UDA1380_DAC_CLK_SYSCLK, -}; - -static struct i2c_board_info h1940_i2c_devices[] = { - { - I2C_BOARD_INFO("uda1380", 0x1a), - .platform_data = &uda1380_info, - }, -}; - -#define DECLARE_BUTTON(p, k, n, w) \ - { \ - .gpio = p, \ - .code = k, \ - .desc = n, \ - .wakeup = w, \ - .active_low = 1, \ - } - -static struct gpio_keys_button h1940_buttons[] = { - DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1), - DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1), - DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0), - DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0), - DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0), - DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0), - DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0), - DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0), - DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0), - DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0), - DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0), -}; - -static struct gpio_keys_platform_data h1940_buttons_data = { - .buttons = h1940_buttons, - .nbuttons = ARRAY_SIZE(h1940_buttons), -}; - -static struct platform_device h1940_dev_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &h1940_buttons_data, - } -}; - -static struct platform_device *h1940_devices[] __initdata = { - &h1940_dev_buttons, - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, - &h1940_device_leds, - &h1940_device_bluetooth, - &s3c_device_sdi, - &s3c_device_rtc, - &samsung_device_pwm, - &h1940_backlight, - &h1940_lcd_powerdev, - &s3c_device_adc, - &s3c_device_ts, - &power_supply, - &h1940_battery, - &h1940_audio, -}; - -static void __init h1940_map_io(void) -{ - s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); - - /* setup PM */ - -#ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); -#endif - s3c_pm_init(); - - /* Add latch gpio chip, set latch initial value */ - h1940_latch_control(0, 0); - WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL)); -} - -static void __init h1940_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -/* H1940 and RX3715 need to reserve this for suspend */ -static void __init h1940_reserve(void) -{ - memblock_reserve(0x30003000, 0x1000); - memblock_reserve(0x30081000, 0x1000); -} - -static void __init h1940_init(void) -{ - u32 tmp; - - s3c24xx_fb_set_platdata(&h1940_fb_info); - gpiod_add_lookup_table(&h1940_udc_gpio_table); - gpiod_add_lookup_table(&h1940_mmc_gpio_table); - gpiod_add_lookup_table(&h1940_audio_gpio_table); - gpiod_add_lookup_table(&h1940_bat_gpio_table); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - s3c24xx_mci_set_platdata(&h1940_mmc_cfg); - s3c24xx_udc_set_platdata(&h1940_udc_cfg); - s3c24xx_ts_set_platdata(&h1940_ts_cfg); - s3c_i2c0_set_platdata(NULL); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT) - | (0x02 << S3C24XX_PLL_PDIV_SHIFT) - | (0x03 << S3C24XX_PLL_SDIV_SHIFT); - writel(tmp, S3C2410_UPLLCON); - - gpio_request(S3C2410_GPC(0), "LCD power"); - gpio_request(S3C2410_GPC(1), "LCD power"); - gpio_request(S3C2410_GPC(4), "LCD power"); - gpio_request(S3C2410_GPC(5), "LCD power"); - gpio_request(S3C2410_GPC(6), "LCD power"); - gpio_request(H1940_LATCH_LCD_P0, "LCD power"); - gpio_request(H1940_LATCH_LCD_P1, "LCD power"); - gpio_request(H1940_LATCH_LCD_P2, "LCD power"); - gpio_request(H1940_LATCH_LCD_P3, "LCD power"); - gpio_request(H1940_LATCH_LCD_P4, "LCD power"); - gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power"); - gpio_direction_output(S3C2410_GPC(0), 0); - gpio_direction_output(S3C2410_GPC(1), 0); - gpio_direction_output(S3C2410_GPC(4), 0); - gpio_direction_output(S3C2410_GPC(5), 0); - gpio_direction_input(S3C2410_GPC(6)); - gpio_direction_output(H1940_LATCH_LCD_P0, 0); - gpio_direction_output(H1940_LATCH_LCD_P1, 0); - gpio_direction_output(H1940_LATCH_LCD_P2, 0); - gpio_direction_output(H1940_LATCH_LCD_P3, 0); - gpio_direction_output(H1940_LATCH_LCD_P4, 0); - gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0); - - gpio_request(H1940_LATCH_SD_POWER, "SD power"); - gpio_direction_output(H1940_LATCH_SD_POWER, 0); - - pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup)); - platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); - - gpio_request(S3C2410_GPA(1), "Red LED blink"); - gpio_request(S3C2410_GPA(3), "Blue LED blink"); - gpio_request(S3C2410_GPA(7), "Green LED blink"); - gpio_request(H1940_LATCH_LED_FLASH, "LED blink"); - gpio_direction_output(S3C2410_GPA(1), 0); - gpio_direction_output(S3C2410_GPA(3), 0); - gpio_direction_output(S3C2410_GPA(7), 0); - gpio_direction_output(H1940_LATCH_LED_FLASH, 0); - - i2c_register_board_info(0, h1940_i2c_devices, - ARRAY_SIZE(h1940_i2c_devices)); -} - -MACHINE_START(H1940, "IPAQ-H1940") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = h1940_map_io, - .reserve = h1940_reserve, - .init_irq = s3c2410_init_irq, - .init_machine = h1940_init, - .init_time = h1940_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c deleted file mode 100644 index 16859bb3bb13..000000000000 --- a/arch/arm/mach-s3c/mach-jive.c +++ /dev/null @@ -1,693 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2007 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://armlinux.simtec.co.uk/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> - -#include <video/ili9320.h> - -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "hardware-s3c24xx.h" -#include "regs-gpio.h" -#include <linux/platform_data/fb-s3c2410.h> -#include "gpio-samsung.h" - -#include <asm/mach-types.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include "gpio-cfg.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" -#include <linux/platform_data/usb-s3c2410_udc.h> - -#include "s3c24xx.h" -#include "s3c2412-power.h" - -static struct map_desc jive_iodesc[] __initdata = { -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg jive_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* Jive flash assignment - * - * 0x00000000-0x00028000 : uboot - * 0x00028000-0x0002c000 : uboot env - * 0x0002c000-0x00030000 : spare - * 0x00030000-0x00200000 : zimage A - * 0x00200000-0x01600000 : cramfs A - * 0x01600000-0x017d0000 : zimage B - * 0x017d0000-0x02bd0000 : cramfs B - * 0x02bd0000-0x03fd0000 : yaffs - */ -static struct mtd_partition __initdata jive_imageA_nand_part[] = { - -#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER - /* Don't allow access to the bootloader from linux */ - { - .name = "uboot", - .offset = 0, - .size = (160 * SZ_1K), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - - /* spare */ - { - .name = "spare", - .offset = (176 * SZ_1K), - .size = (16 * SZ_1K), - }, -#endif - - /* booted images */ - { - .name = "kernel (ro)", - .offset = (192 * SZ_1K), - .size = (SZ_2M) - (192 * SZ_1K), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "root (ro)", - .offset = (SZ_2M), - .size = (20 * SZ_1M), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - - /* yaffs */ - { - .name = "yaffs", - .offset = (44 * SZ_1M), - .size = (20 * SZ_1M), - }, - - /* bootloader environment */ - { - .name = "env", - .offset = (160 * SZ_1K), - .size = (16 * SZ_1K), - }, - - /* upgrade images */ - { - .name = "zimage", - .offset = (22 * SZ_1M), - .size = (2 * SZ_1M) - (192 * SZ_1K), - }, { - .name = "cramfs", - .offset = (24 * SZ_1M) - (192*SZ_1K), - .size = (20 * SZ_1M), - }, -}; - -static struct mtd_partition __initdata jive_imageB_nand_part[] = { - -#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER - /* Don't allow access to the bootloader from linux */ - { - .name = "uboot", - .offset = 0, - .size = (160 * SZ_1K), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - - /* spare */ - { - .name = "spare", - .offset = (176 * SZ_1K), - .size = (16 * SZ_1K), - }, -#endif - - /* booted images */ - { - .name = "kernel (ro)", - .offset = (22 * SZ_1M), - .size = (2 * SZ_1M) - (192 * SZ_1K), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "root (ro)", - .offset = (24 * SZ_1M) - (192 * SZ_1K), - .size = (20 * SZ_1M), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - - /* yaffs */ - { - .name = "yaffs", - .offset = (44 * SZ_1M), - .size = (20 * SZ_1M), - }, - - /* bootloader environment */ - { - .name = "env", - .offset = (160 * SZ_1K), - .size = (16 * SZ_1K), - }, - - /* upgrade images */ - { - .name = "zimage", - .offset = (192 * SZ_1K), - .size = (2 * SZ_1M) - (192 * SZ_1K), - }, { - .name = "cramfs", - .offset = (2 * SZ_1M), - .size = (20 * SZ_1M), - }, -}; - -static struct s3c2410_nand_set __initdata jive_nand_sets[] = { - [0] = { - .name = "flash", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part), - .partitions = jive_imageA_nand_part, - }, -}; - -static struct s3c2410_platform_nand __initdata jive_nand_info = { - /* set taken from osiris nand timings, possibly still conservative */ - .tacls = 30, - .twrph0 = 55, - .twrph1 = 40, - .sets = jive_nand_sets, - .nr_sets = ARRAY_SIZE(jive_nand_sets), - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -static int __init jive_mtdset(char *options) -{ - struct s3c2410_nand_set *nand = &jive_nand_sets[0]; - unsigned long set; - - if (options == NULL || options[0] == '\0') - return 1; - - if (kstrtoul(options, 10, &set)) { - printk(KERN_ERR "failed to parse mtdset=%s\n", options); - return 1; - } - - switch (set) { - case 1: - nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part); - nand->partitions = jive_imageB_nand_part; - break; - case 0: - /* this is already setup in the nand info */ - break; - default: - printk(KERN_ERR "Unknown mtd set %ld specified," - "using default.", set); - } - - return 1; -} - -/* parse the mtdset= option given to the kernel command line */ -__setup("mtdset=", jive_mtdset); - -/* LCD timing and setup */ - -#define LCD_XRES (240) -#define LCD_YRES (320) -#define LCD_LEFT_MARGIN (12) -#define LCD_RIGHT_MARGIN (12) -#define LCD_LOWER_MARGIN (12) -#define LCD_UPPER_MARGIN (12) -#define LCD_VSYNC (2) -#define LCD_HSYNC (2) - -#define LCD_REFRESH (60) - -#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) -#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) - -static struct s3c2410fb_display jive_vgg2432a4_display[] = { - [0] = { - .width = LCD_XRES, - .height = LCD_YRES, - .xres = LCD_XRES, - .yres = LCD_YRES, - .left_margin = LCD_LEFT_MARGIN, - .right_margin = LCD_RIGHT_MARGIN, - .upper_margin = LCD_UPPER_MARGIN, - .lower_margin = LCD_LOWER_MARGIN, - .hsync_len = LCD_HSYNC, - .vsync_len = LCD_VSYNC, - - .pixclock = (1000000000000LL / - (LCD_REFRESH * LCD_HTOT * LCD_VTOT)), - - .bpp = 16, - .type = (S3C2410_LCDCON1_TFT16BPP | - S3C2410_LCDCON1_TFT), - - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_INVVDEN | - S3C2410_LCDCON5_PWREN), - }, -}; - -/* todo - put into gpio header */ - -#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) -#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) - -static struct s3c2410fb_mach_info jive_lcd_config = { - .displays = jive_vgg2432a4_display, - .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), - .default_display = 0, - - /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN - * and disable the pull down resistors on pins we are using for LCD - * data. */ - - .gpcup = (0xf << 1) | (0x3f << 10), - .gpcup_reg = S3C2410_GPCUP, - - .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | - S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | - S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | - S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | - S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), - - .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | - S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | - S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | - S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | - S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), - - .gpccon_reg = S3C2410_GPCCON, - - .gpdup = (0x3f << 2) | (0x3f << 10), - - .gpdup_reg = S3C2410_GPDUP, - - .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | - S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | - S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | - S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | - S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | - S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), - - .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | - S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | - S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | - S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| - S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| - S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), - - .gpdcon_reg = S3C2410_GPDCON, -}; - -/* ILI9320 support. */ - -static void jive_lcm_reset(unsigned int set) -{ - printk(KERN_DEBUG "%s(%d)\n", __func__, set); - - gpio_set_value(S3C2410_GPG(13), set); -} - -#undef LCD_UPPER_MARGIN -#define LCD_UPPER_MARGIN 2 - -static struct ili9320_platdata jive_lcm_config = { - .hsize = LCD_XRES, - .vsize = LCD_YRES, - - .reset = jive_lcm_reset, - .suspend = ILI9320_SUSPEND_DEEP, - - .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR, - .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) | - ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)), - .display3 = 0x0, - .display4 = 0x0, - .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 | - ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF), - .rgb_if2 = ILI9320_RGBIF2_DPL, - .interface2 = 0x0, - .interface3 = 0x3, - .interface4 = (ILI9320_INTERFACE4_RTNE(16) | - ILI9320_INTERFACE4_DIVE(1)), - .interface5 = 0x0, - .interface6 = 0x0, -}; - -/* LCD SPI support */ - -static struct spi_gpio_platform_data jive_lcd_spi = { - .num_chipselect = 1, -}; - -static struct platform_device jive_device_lcdspi = { - .name = "spi_gpio", - .id = 1, - .dev.platform_data = &jive_lcd_spi, -}; - -static struct gpiod_lookup_table jive_lcdspi_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("GPIOG", 8, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOB", 8, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOB", 7, - "cs", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* WM8750 audio code SPI definition */ - -static struct spi_gpio_platform_data jive_wm8750_spi = { - .num_chipselect = 1, -}; - -static struct platform_device jive_device_wm8750 = { - .name = "spi_gpio", - .id = 2, - .dev.platform_data = &jive_wm8750_spi, -}; - -static struct gpiod_lookup_table jive_wm8750_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("GPIOB", 4, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOB", 9, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOH", 10, - "cs", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* JIVE SPI devices. */ - -static struct spi_board_info __initdata jive_spi_devs[] = { - [0] = { - .modalias = "VGG2432A4", - .bus_num = 1, - .chip_select = 0, - .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */ - .max_speed_hz = 100000, - .platform_data = &jive_lcm_config, - }, { - .modalias = "WM8750", - .bus_num = 2, - .chip_select = 0, - .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */ - .max_speed_hz = 100000, - }, -}; - -/* I2C bus and device configuration. */ - -static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = { - .frequency = 80 * 1000, - .flags = S3C_IICFLG_FILTER, - .sda_delay = 2, -}; - -static struct i2c_board_info jive_i2c_devs[] __initdata = { - [0] = { - I2C_BOARD_INFO("lis302dl", 0x1c), - .irq = IRQ_EINT14, - }, -}; - -/* The platform devices being used. */ - -static struct platform_device *jive_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_rtc, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_lcd, - &jive_device_lcdspi, - &jive_device_wm8750, - &s3c_device_nand, - &s3c_device_usbgadget, - &s3c2412_device_dma, -}; - -static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table jive_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* Jive power management device */ - -#ifdef CONFIG_PM -static int jive_pm_suspend(void) -{ - /* Write the magic value u-boot uses to check for resume into - * the INFORM0 register, and ensure INFORM1 is set to the - * correct address to resume from. */ - - __raw_writel(0x2BED, S3C2412_INFORM0); - __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1); - - return 0; -} - -static void jive_pm_resume(void) -{ - __raw_writel(0x0, S3C2412_INFORM0); -} - -#else -#define jive_pm_suspend NULL -#define jive_pm_resume NULL -#endif - -static struct syscore_ops jive_pm_syscore_ops = { - .suspend = jive_pm_suspend, - .resume = jive_pm_resume, -}; - -static void __init jive_map_io(void) -{ - s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init jive_init_time(void) -{ - s3c2412_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void jive_power_off(void) -{ - printk(KERN_INFO "powering system down...\n"); - - gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPC(5)); -} - -static void __init jive_machine_init(void) -{ - /* register system core operations for managing low level suspend */ - - register_syscore_ops(&jive_pm_syscore_ops); - - /* write our sleep configurations for the IO. Pull down all unused - * IO, ensure that we have turned off all peripherals we do not - * need, and configure the ones we do need. */ - - /* Port B sleep */ - - __raw_writel(S3C2412_SLPCON_IN(0) | - S3C2412_SLPCON_PULL(1) | - S3C2412_SLPCON_HIGH(2) | - S3C2412_SLPCON_PULL(3) | - S3C2412_SLPCON_PULL(4) | - S3C2412_SLPCON_PULL(5) | - S3C2412_SLPCON_PULL(6) | - S3C2412_SLPCON_HIGH(7) | - S3C2412_SLPCON_PULL(8) | - S3C2412_SLPCON_PULL(9) | - S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON); - - /* Port C sleep */ - - __raw_writel(S3C2412_SLPCON_PULL(0) | - S3C2412_SLPCON_PULL(1) | - S3C2412_SLPCON_PULL(2) | - S3C2412_SLPCON_PULL(3) | - S3C2412_SLPCON_PULL(4) | - S3C2412_SLPCON_PULL(5) | - S3C2412_SLPCON_LOW(6) | - S3C2412_SLPCON_PULL(6) | - S3C2412_SLPCON_PULL(7) | - S3C2412_SLPCON_PULL(8) | - S3C2412_SLPCON_PULL(9) | - S3C2412_SLPCON_PULL(10) | - S3C2412_SLPCON_PULL(11) | - S3C2412_SLPCON_PULL(12) | - S3C2412_SLPCON_PULL(13) | - S3C2412_SLPCON_PULL(14) | - S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON); - - /* Port D sleep */ - - __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON); - - /* Port F sleep */ - - __raw_writel(S3C2412_SLPCON_LOW(0) | - S3C2412_SLPCON_LOW(1) | - S3C2412_SLPCON_LOW(2) | - S3C2412_SLPCON_EINT(3) | - S3C2412_SLPCON_EINT(4) | - S3C2412_SLPCON_EINT(5) | - S3C2412_SLPCON_EINT(6) | - S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON); - - /* Port G sleep */ - - __raw_writel(S3C2412_SLPCON_IN(0) | - S3C2412_SLPCON_IN(1) | - S3C2412_SLPCON_IN(2) | - S3C2412_SLPCON_IN(3) | - S3C2412_SLPCON_IN(4) | - S3C2412_SLPCON_IN(5) | - S3C2412_SLPCON_IN(6) | - S3C2412_SLPCON_IN(7) | - S3C2412_SLPCON_PULL(8) | - S3C2412_SLPCON_PULL(9) | - S3C2412_SLPCON_IN(10) | - S3C2412_SLPCON_PULL(11) | - S3C2412_SLPCON_PULL(12) | - S3C2412_SLPCON_PULL(13) | - S3C2412_SLPCON_IN(14) | - S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON); - - /* Port H sleep */ - - __raw_writel(S3C2412_SLPCON_PULL(0) | - S3C2412_SLPCON_PULL(1) | - S3C2412_SLPCON_PULL(2) | - S3C2412_SLPCON_PULL(3) | - S3C2412_SLPCON_PULL(4) | - S3C2412_SLPCON_PULL(5) | - S3C2412_SLPCON_PULL(6) | - S3C2412_SLPCON_IN(7) | - S3C2412_SLPCON_IN(8) | - S3C2412_SLPCON_PULL(9) | - S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON); - - /* initialise the power management now we've setup everything. */ - - s3c_pm_init(); - - /** TODO - check that this is after the cmdline option! */ - s3c_nand_set_platdata(&jive_nand_info); - - gpio_request(S3C2410_GPG(13), "lcm reset"); - gpio_direction_output(S3C2410_GPG(13), 0); - - gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL); - gpio_free(S3C2410_GPB(6)); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - s3c24xx_udc_set_platdata(&jive_udc_cfg); - s3c24xx_fb_set_platdata(&jive_lcd_config); - - spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); - - s3c_i2c0_set_platdata(&jive_i2c_cfg); - i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs)); - - pm_power_off = jive_power_off; - - gpiod_add_lookup_table(&jive_udc_gpio_table); - gpiod_add_lookup_table(&jive_lcdspi_gpiod_table); - gpiod_add_lookup_table(&jive_wm8750_gpiod_table); - platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); -} - -MACHINE_START(JIVE, "JIVE") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2412, - .init_irq = s3c2412_init_irq, - .map_io = jive_map_io, - .init_machine = jive_machine_init, - .init_time = jive_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c deleted file mode 100644 index 283be70ca622..000000000000 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ /dev/null @@ -1,804 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> -// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> -// and modifications by SBZ <sbz@spgui.org> and -// Weibing <http://weibing.blogbus.com> and -// Michel Pollet <buserror@gmail.com> -// -// For product information, visit https://code.google.com/p/mini2440/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/dm9000.h> -#include <linux/property.h> -#include <linux/platform_device.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/mmc/host.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/fb-s3c2410.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include <linux/platform_data/leds-s3c24xx.h> -#include "irqs.h" -#include "gpio-samsung.h" -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/usb-s3c2410_udc.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include "gpio-cfg.h" -#include "devs.h" -#include "cpu.h" - -#include <sound/s3c24xx_uda134x.h> - -#include "s3c24xx.h" - -#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300) - -static struct map_desc mini2440_iodesc[] __initdata = { - /* nothing to declare, move along */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) - - -static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, -}; - -/* USB device UDC support */ - -static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table mini2440_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* LCD timing and setup */ - -/* - * This macro simplifies the table bellow - */ -#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \ - _yres, margin_top, margin_bottom, vsync, refresh) \ - .width = _xres, \ - .xres = _xres, \ - .height = _yres, \ - .yres = _yres, \ - .left_margin = margin_left, \ - .right_margin = margin_right, \ - .upper_margin = margin_top, \ - .lower_margin = margin_bottom, \ - .hsync_len = hsync, \ - .vsync_len = vsync, \ - .pixclock = ((_clock*100000000000LL) / \ - ((refresh) * \ - (hsync + margin_left + _xres + margin_right) * \ - (vsync + margin_top + _yres + margin_bottom))), \ - .bpp = 16,\ - .type = (S3C2410_LCDCON1_TFT16BPP |\ - S3C2410_LCDCON1_TFT) - -static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { - [0] = { /* mini2440 + 3.5" TFT + touchscreen */ - _LCD_DECLARE( - 7, /* The 3.5 is quite fast */ - 240, 21, 38, 6, /* x timing */ - 320, 4, 4, 2, /* y timing */ - 60), /* refresh rate */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_INVVDEN | - S3C2410_LCDCON5_PWREN), - }, - [1] = { /* mini2440 + 7" TFT + touchscreen */ - _LCD_DECLARE( - 10, /* the 7" runs slower */ - 800, 40, 40, 48, /* x timing */ - 480, 29, 3, 3, /* y timing */ - 50), /* refresh rate */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN), - }, - /* The VGA shield can outout at several resolutions. All share - * the same timings, however, anything smaller than 1024x768 - * will only be displayed in the top left corner of a 1024x768 - * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been omitted here. - */ - [2] = { - _LCD_DECLARE( - 10, - 1024, 1, 2, 2, /* y timing */ - 768, 200, 16, 16, /* x timing */ - 24), /* refresh rate, maximum stable, - * tested with the FPGA shield - */ - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_HWSWP), - }, - /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ - [3] = { - _LCD_DECLARE( - /* clock */ - 7, - /* xres, margin_right, margin_left, hsync */ - 320, 68, 66, 4, - /* yres, margin_top, margin_bottom, vsync */ - 240, 4, 4, 9, - /* refresh rate */ - 60), - .lcdcon5 = (S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVDEN | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVCLK | - S3C2410_LCDCON5_HWSWP), - }, -}; - -/* todo - put into gpio header */ - -#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) -#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) - -static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { - .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ - .num_displays = 1, - .default_display = 0, - - /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN - * and disable the pull down resistors on pins we are using for LCD - * data. - */ - - .gpcup = (0xf << 1) | (0x3f << 10), - - .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | - S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | - S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | - S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | - S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), - - .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | - S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | - S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | - S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | - S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), - - .gpccon_reg = S3C2410_GPCCON, - .gpcup_reg = S3C2410_GPCUP, - - .gpdup = (0x3f << 2) | (0x3f << 10), - - .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | - S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | - S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | - S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | - S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | - S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), - - .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | - S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | - S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | - S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| - S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| - S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), - - .gpdcon_reg = S3C2410_GPDCON, - .gpdup_reg = S3C2410_GPDUP, -}; - -/* MMC/SD */ - -static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = { - .wprotect_invert = 1, - .set_power = s3c24xx_mci_def_set_power, - .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -static struct gpiod_lookup_table mini2440_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* Card detect S3C2410_GPG(8) */ - GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW), - /* Write protect S3C2410_GPH(8) */ - GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH), - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* NAND Flash on MINI2440 board */ - -static struct mtd_partition mini2440_default_nand_part[] __initdata = { - [0] = { - .name = "u-boot", - .size = SZ_256K, - .offset = 0, - }, - [1] = { - .name = "u-boot-env", - .size = SZ_128K, - .offset = SZ_256K, - }, - [2] = { - .name = "kernel", - /* 5 megabytes, for a kernel with no modules - * or a uImage with a ramdisk attached - */ - .size = 0x00500000, - .offset = SZ_256K + SZ_128K, - }, - [3] = { - .name = "root", - .offset = SZ_256K + SZ_128K + 0x00500000, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { - [0] = { - .name = "nand", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), - .partitions = mini2440_default_nand_part, - .flash_bbt = 1, /* we use u-boot to create a BBT */ - }, -}; - -static struct s3c2410_platform_nand mini2440_nand_info __initdata = { - .tacls = 0, - .twrph0 = 25, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(mini2440_nand_sets), - .sets = mini2440_nand_sets, - .ignore_unset_ecc = 1, - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, -}; - -/* DM9000AEP 10/100 ethernet controller */ - -static struct resource mini2440_dm9k_resource[] = { - [0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4), - [1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4), - [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ - | IORESOURCE_IRQ_HIGHEDGE), -}; - -/* - * The DM9000 has no eeprom, and it's MAC address is set by - * the bootloader before starting the kernel. - */ -static struct dm9000_plat_data mini2440_dm9k_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), -}; - -static struct platform_device mini2440_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(mini2440_dm9k_resource), - .resource = mini2440_dm9k_resource, - .dev = { - .platform_data = &mini2440_dm9k_pdata, - }, -}; - -/* CON5 - * +--+ /-----\ - * | | | | - * | | | BAT | - * | | \_____/ - * | | - * | | +----+ +----+ - * | | | K5 | | K1 | - * | | +----+ +----+ - * | | +----+ +----+ - * | | | K4 | | K2 | - * | | +----+ +----+ - * | | +----+ +----+ - * | | | K6 | | K3 | - * | | +----+ +----+ - * ..... - */ -static struct gpio_keys_button mini2440_buttons[] = { - { - .gpio = S3C2410_GPG(0), /* K1 */ - .code = KEY_F1, - .desc = "Button 1", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(3), /* K2 */ - .code = KEY_F2, - .desc = "Button 2", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(5), /* K3 */ - .code = KEY_F3, - .desc = "Button 3", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(6), /* K4 */ - .code = KEY_POWER, - .desc = "Power", - .active_low = 1, - }, - { - .gpio = S3C2410_GPG(7), /* K5 */ - .code = KEY_F5, - .desc = "Button 5", - .active_low = 1, - }, -#if 0 - /* this pin is also known as TCLK1 and seems to already - * marked as "in use" somehow in the kernel -- possibly wrongly - */ - { - .gpio = S3C2410_GPG(11), /* K6 */ - .code = KEY_F6, - .desc = "Button 6", - .active_low = 1, - }, -#endif -}; - -static struct gpio_keys_platform_data mini2440_button_data = { - .buttons = mini2440_buttons, - .nbuttons = ARRAY_SIZE(mini2440_buttons), -}; - -static struct platform_device mini2440_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mini2440_button_data, - } -}; - -/* LEDS */ - -static struct gpiod_lookup_table mini2440_led1_gpio_table = { - .dev_id = "s3c24xx_led.1", - .table = { - GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table mini2440_led2_gpio_table = { - .dev_id = "s3c24xx_led.2", - .table = { - GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table mini2440_led3_gpio_table = { - .dev_id = "s3c24xx_led.3", - .table = { - GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table mini2440_led4_gpio_table = { - .dev_id = "s3c24xx_led.4", - .table = { - GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct gpiod_lookup_table mini2440_backlight_gpio_table = { - .dev_id = "s3c24xx_led.5", - .table = { - GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c24xx_led_platdata mini2440_led1_pdata = { - .name = "led1", - .def_trigger = "heartbeat", -}; - -static struct s3c24xx_led_platdata mini2440_led2_pdata = { - .name = "led2", - .def_trigger = "nand-disk", -}; - -static struct s3c24xx_led_platdata mini2440_led3_pdata = { - .name = "led3", - .def_trigger = "mmc0", -}; - -static struct s3c24xx_led_platdata mini2440_led4_pdata = { - .name = "led4", - .def_trigger = "", -}; - -static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { - .name = "backlight", - .def_trigger = "backlight", -}; - -static struct platform_device mini2440_led1 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &mini2440_led1_pdata, - }, -}; - -static struct platform_device mini2440_led2 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &mini2440_led2_pdata, - }, -}; - -static struct platform_device mini2440_led3 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &mini2440_led3_pdata, - }, -}; - -static struct platform_device mini2440_led4 = { - .name = "s3c24xx_led", - .id = 4, - .dev = { - .platform_data = &mini2440_led4_pdata, - }, -}; - -static struct platform_device mini2440_led_backlight = { - .name = "s3c24xx_led", - .id = 5, - .dev = { - .platform_data = &mini2440_led_backlight_pdata, - }, -}; - -/* AUDIO */ - -static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = { - .l3_clk = S3C2410_GPB(4), - .l3_mode = S3C2410_GPB(2), - .l3_data = S3C2410_GPB(3), - .model = UDA134X_UDA1341 -}; - -static struct platform_device mini2440_audio = { - .name = "s3c24xx_uda134x", - .id = 0, - .dev = { - .platform_data = &mini2440_audio_pins, - }, -}; - -/* - * I2C devices - */ -static const struct property_entry mini2440_at24_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 16), - { } -}; - -static const struct software_node mini2440_at24_node = { - .properties = mini2440_at24_properties, -}; - -static struct i2c_board_info mini2440_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("24c08", 0x50), - .swnode = &mini2440_at24_node, - }, -}; - -static struct uda134x_platform_data s3c24xx_uda134x = { - .l3 = { - .gpio_clk = S3C2410_GPB(4), - .gpio_data = S3C2410_GPB(3), - .gpio_mode = S3C2410_GPB(2), - .use_gpios = 1, - .data_hold = 1, - .data_setup = 1, - .clock_high = 1, - .mode_hold = 1, - .mode = 1, - .mode_setup = 1, - }, - .model = UDA134X_UDA1341, -}; - -static struct platform_device uda1340_codec = { - .name = "uda134x-codec", - .id = -1, - .dev = { - .platform_data = &s3c24xx_uda134x, - }, -}; - -static struct platform_device *mini2440_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_usbgadget, - &mini2440_device_eth, - &mini2440_led1, - &mini2440_led2, - &mini2440_led3, - &mini2440_led4, - &mini2440_button_device, - &s3c_device_nand, - &s3c_device_sdi, - &s3c2440_device_dma, - &s3c_device_iis, - &uda1340_codec, - &mini2440_audio, -}; - -static void __init mini2440_map_io(void) -{ - s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init mini2440_init_time(void) -{ - s3c2440_init_clocks(12000000); - s3c24xx_timer_init(); -} - -/* - * mini2440_features string - * - * t = Touchscreen present - * b = backlight control - * c = camera [TODO] - * 0-9 LCD configuration - * - */ -static char mini2440_features_str[12] __initdata = "0tb"; - -static int __init mini2440_features_setup(char *str) -{ - if (str) - strscpy(mini2440_features_str, str, - sizeof(mini2440_features_str)); - return 1; -} - -__setup("mini2440=", mini2440_features_setup); - -#define FEATURE_SCREEN (1 << 0) -#define FEATURE_BACKLIGHT (1 << 1) -#define FEATURE_TOUCH (1 << 2) -#define FEATURE_CAMERA (1 << 3) - -struct mini2440_features_t { - int count; - int done; - int lcd_index; - struct platform_device *optional[8]; -}; - -static void __init mini2440_parse_features( - struct mini2440_features_t *features, - const char *features_str) -{ - const char *fp = features_str; - - features->count = 0; - features->done = 0; - features->lcd_index = -1; - - while (*fp) { - char f = *fp++; - - switch (f) { - case '0'...'9': /* tft screen */ - if (features->done & FEATURE_SCREEN) { - pr_info("MINI2440: '%c' ignored, screen type already set\n", - f); - } else { - int li = f - '0'; - - if (li >= ARRAY_SIZE(mini2440_lcd_cfg)) - pr_info("MINI2440: '%c' out of range LCD mode\n", - f); - else { - features->optional[features->count++] = - &s3c_device_lcd; - features->lcd_index = li; - } - } - features->done |= FEATURE_SCREEN; - break; - case 'b': - if (features->done & FEATURE_BACKLIGHT) - pr_info("MINI2440: '%c' ignored, backlight already set\n", - f); - else { - features->optional[features->count++] = - &mini2440_led_backlight; - } - features->done |= FEATURE_BACKLIGHT; - break; - case 't': - pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n", - f); - break; - case 'c': - if (features->done & FEATURE_CAMERA) - pr_info("MINI2440: '%c' ignored, camera already registered\n", - f); - else - features->optional[features->count++] = - &s3c_device_camif; - features->done |= FEATURE_CAMERA; - break; - } - } -} - -static void __init mini2440_init(void) -{ - struct mini2440_features_t features = { 0 }; - int i; - - pr_info("MINI2440: Option string mini2440=%s\n", - mini2440_features_str); - - /* Parse the feature string */ - mini2440_parse_features(&features, mini2440_features_str); - - /* turn LCD on */ - s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); - - /* Turn the backlight early on */ - WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); - gpio_free(S3C2410_GPG(4)); - - /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL); - s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); - gpio_free(S3C2410_GPB(1)); - - /* mark the key as input, without pullups (there is one on the board) */ - for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); - } - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - if (features.lcd_index != -1) { - int li; - - mini2440_fb_info.displays = - &mini2440_lcd_cfg[features.lcd_index]; - - pr_info("MINI2440: LCD"); - for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++) - if (li == features.lcd_index) - pr_cont(" [%d:%dx%d]", li, - mini2440_lcd_cfg[li].width, - mini2440_lcd_cfg[li].height); - else - pr_cont(" %d:%dx%d", li, - mini2440_lcd_cfg[li].width, - mini2440_lcd_cfg[li].height); - pr_cont("\n"); - s3c24xx_fb_set_platdata(&mini2440_fb_info); - } - - gpiod_add_lookup_table(&mini2440_udc_gpio_table); - s3c24xx_udc_set_platdata(&mini2440_udc_cfg); - gpiod_add_lookup_table(&mini2440_mmc_gpio_table); - s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); - s3c_nand_set_platdata(&mini2440_nand_info); - s3c_i2c0_set_platdata(NULL); - - i2c_register_board_info(0, mini2440_i2c_devs, - ARRAY_SIZE(mini2440_i2c_devs)); - - /* Disable pull-up on the LED lines */ - s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE); - - /* Add lookups for the lines */ - gpiod_add_lookup_table(&mini2440_led1_gpio_table); - gpiod_add_lookup_table(&mini2440_led2_gpio_table); - gpiod_add_lookup_table(&mini2440_led3_gpio_table); - gpiod_add_lookup_table(&mini2440_led4_gpio_table); - gpiod_add_lookup_table(&mini2440_backlight_gpio_table); - - platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices)); - - if (features.count) /* the optional features */ - platform_add_devices(features.optional, features.count); - -} - - -MACHINE_START(MINI2440, "MINI2440") - /* Maintainer: Michel Pollet <buserror@gmail.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = mini2440_map_io, - .init_machine = mini2440_init, - .init_irq = s3c2440_init_irq, - .init_time = mini2440_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c deleted file mode 100644 index 90122fc6b2aa..000000000000 --- a/arch/arm/mach-s3c/mach-n30.c +++ /dev/null @@ -1,682 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Machine specific code for the Acer n30, Acer N35, Navman PiN 570, -// Yakumo AlphaX and Airis NC05 PDAs. -// -// Copyright (c) 2003-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se> -// -// There is a wiki with more information about the n30 port at -// https://handhelds.org/moin/moin.cgi/AcerN30Documentation . - -#include <linux/kernel.h> -#include <linux/types.h> - -#include <linux/gpio_keys.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/mmc/host.h> - -#include "hardware-s3c24xx.h" -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/fb-s3c2410.h> -#include <linux/platform_data/leds-s3c24xx.h> -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/i2c-s3c2410.h> - -#include "cpu.h" -#include "devs.h" -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/usb-s3c2410_udc.h> - -#include "s3c24xx.h" - -static struct map_desc n30_iodesc[] __initdata = { - /* nothing here yet */ -}; - -static struct s3c2410_uartcfg n30_uartcfgs[] = { - /* Normal serial port */ - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x2c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [1] = { - .hwport = 1, - .flags = 0, - .uart_flags = UPF_CONS_FLOW, - .ucon = 0x2c5, - .ulcon = 0x43, - .ufcon = 0x51, - }, - /* On the N30 the bluetooth controller is connected here. - * On the N35 and variants the GPS receiver is connected here. */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x2c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, -}; - -static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table n30_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpio_keys_button n30_buttons[] = { - { - .gpio = S3C2410_GPF(0), - .code = KEY_POWER, - .desc = "Power", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(9), - .code = KEY_UP, - .desc = "Thumbwheel Up", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(8), - .code = KEY_DOWN, - .desc = "Thumbwheel Down", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(7), - .code = KEY_ENTER, - .desc = "Thumbwheel Press", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(7), - .code = KEY_HOMEPAGE, - .desc = "Home", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(6), - .code = KEY_CALENDAR, - .desc = "Calendar", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(5), - .code = KEY_ADDRESSBOOK, - .desc = "Contacts", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(4), - .code = KEY_MAIL, - .desc = "Mail", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data n30_button_data = { - .buttons = n30_buttons, - .nbuttons = ARRAY_SIZE(n30_buttons), -}; - -static struct platform_device n30_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &n30_button_data, - } -}; - -static struct gpio_keys_button n35_buttons[] = { - { - .gpio = S3C2410_GPF(0), - .code = KEY_POWER, - .type = EV_PWR, - .desc = "Power", - .active_low = 0, - .wakeup = 1, - }, - { - .gpio = S3C2410_GPG(9), - .code = KEY_UP, - .desc = "Joystick Up", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(8), - .code = KEY_DOWN, - .desc = "Joystick Down", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(6), - .code = KEY_DOWN, - .desc = "Joystick Left", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(5), - .code = KEY_DOWN, - .desc = "Joystick Right", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(7), - .code = KEY_ENTER, - .desc = "Joystick Press", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(7), - .code = KEY_HOMEPAGE, - .desc = "Home", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(6), - .code = KEY_CALENDAR, - .desc = "Calendar", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(5), - .code = KEY_ADDRESSBOOK, - .desc = "Contacts", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(4), - .code = KEY_MAIL, - .desc = "Mail", - .active_low = 0, - }, - { - .gpio = S3C2410_GPF(3), - .code = SW_RADIO, - .desc = "GPS Antenna", - .active_low = 0, - }, - { - .gpio = S3C2410_GPG(2), - .code = SW_HEADPHONE_INSERT, - .desc = "Headphone", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data n35_button_data = { - .buttons = n35_buttons, - .nbuttons = ARRAY_SIZE(n35_buttons), -}; - -static struct platform_device n35_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &n35_button_data, - } -}; - -/* This is the bluetooth LED on the device. */ - -static struct gpiod_lookup_table n30_blue_led_gpio_table = { - .dev_id = "s3c24xx_led.1", - .table = { - GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c24xx_led_platdata n30_blue_led_pdata = { - .name = "blue_led", - .def_trigger = "", -}; - -/* This is the blue LED on the device. Originally used to indicate GPS activity - * by flashing. */ - -static struct gpiod_lookup_table n35_blue_led_gpio_table = { - .dev_id = "s3c24xx_led.1", - .table = { - GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c24xx_led_platdata n35_blue_led_pdata = { - .name = "blue_led", - .def_trigger = "", -}; - -/* This LED is driven by the battery microcontroller, and is blinking - * red, blinking green or solid green when the battery is low, - * charging or full respectively. By driving GPD9 low, it's possible - * to force the LED to blink red, so call that warning LED. */ - -static struct gpiod_lookup_table n30_warning_led_gpio_table = { - .dev_id = "s3c24xx_led.2", - .table = { - GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct s3c24xx_led_platdata n30_warning_led_pdata = { - .name = "warning_led", - .def_trigger = "", -}; - -static struct gpiod_lookup_table n35_warning_led_gpio_table = { - .dev_id = "s3c24xx_led.2", - .table = { - GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct s3c24xx_led_platdata n35_warning_led_pdata = { - .name = "warning_led", - .def_trigger = "", -}; - -static struct platform_device n30_blue_led = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &n30_blue_led_pdata, - }, -}; - -static struct platform_device n35_blue_led = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &n35_blue_led_pdata, - }, -}; - -static struct platform_device n30_warning_led = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &n30_warning_led_pdata, - }, -}; - -static struct platform_device n35_warning_led = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &n35_warning_led_pdata, - }, -}; - -static struct s3c2410fb_display n30_display __initdata = { - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .pixclock = 170000, - - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 3, - .right_margin = 40, - .hsync_len = 40, - .upper_margin = 2, - .lower_margin = 3, - .vsync_len = 2, - - .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME, -}; - -static struct s3c2410fb_mach_info n30_fb_info __initdata = { - .displays = &n30_display, - .num_displays = 1, - .default_display = 0, - .lpcsel = 0x06, -}; - -static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd) -{ - s3c24xx_mci_def_set_power(power_mode, vdd); - - switch (power_mode) { - case MMC_POWER_ON: - case MMC_POWER_UP: - gpio_set_value(S3C2410_GPG(4), 1); - break; - case MMC_POWER_OFF: - default: - gpio_set_value(S3C2410_GPG(4), 0); - break; - } -} - -static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = { - .ocr_avail = MMC_VDD_32_33, - .set_power = n30_sdi_set_power, -}; - -static struct gpiod_lookup_table n30_mci_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* Card detect S3C2410_GPF(1) */ - GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW), - /* Write protect S3C2410_GPG(10) */ - GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW), - { }, - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - }, -}; - -static struct platform_device *n30_devices[] __initdata = { - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_ohci, - &s3c_device_rtc, - &s3c_device_usbgadget, - &s3c_device_sdi, - &n30_button_device, - &n30_blue_led, - &n30_warning_led, -}; - -static struct platform_device *n35_devices[] __initdata = { - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_usbgadget, - &s3c_device_sdi, - &n35_button_device, - &n35_blue_led, - &n35_warning_led, -}; - -static struct s3c2410_platform_i2c __initdata n30_i2ccfg = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 10*1000, -}; - -/* Lots of hardcoded stuff, but it sets up the hardware in a useful - * state so that we can boot Linux directly from flash. */ -static void __init n30_hwinit(void) -{ - /* GPA0-11 special functions -- unknown what they do - * GPA12 N30 special function -- unknown what it does - * N35/PiN output -- unknown what it does - * - * A12 is nGCS1 on the N30 and an output on the N35/PiN. I - * don't think it does anything useful on the N30, so I ought - * to make it an output there too since it always driven to 0 - * as far as I can tell. */ - if (machine_is_n30()) - __raw_writel(0x007fffff, S3C2410_GPACON); - if (machine_is_n35()) - __raw_writel(0x007fefff, S3C2410_GPACON); - __raw_writel(0x00000000, S3C2410_GPADAT); - - /* GPB0 TOUT0 backlight level - * GPB1 output 1=backlight on - * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled - * GPB3 output USB D+ pull up 0=disabled, 1=enabled - * GPB4 N30 output -- unknown function - * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled - * GPB5 output -- unknown function - * GPB6 input -- unknown function - * GPB7 output -- unknown function - * GPB8 output -- probably LCD driver enable - * GPB9 output -- probably LCD VSYNC driver enable - * GPB10 output -- probably LCD HSYNC driver enable - */ - __raw_writel(0x00154556, S3C2410_GPBCON); - __raw_writel(0x00000750, S3C2410_GPBDAT); - __raw_writel(0x00000073, S3C2410_GPBUP); - - /* GPC0 input RS232 DCD/DSR/RI - * GPC1 LCD - * GPC2 output RS232 DTR? - * GPC3 input RS232 DCD/DSR/RI - * GPC4 LCD - * GPC5 output 0=NAND write enabled, 1=NAND write protect - * GPC6 input -- unknown function - * GPC7 input charger status 0=charger connected - * this input can be triggered by power on the USB device - * port too, but will go back to disconnected soon after. - * GPC8 N30/N35 output -- unknown function, always driven to 1 - * PiN input -- unknown function, always read as 1 - * Make it an input with a pull up for all models. - * GPC9-15 LCD - */ - __raw_writel(0xaaa80618, S3C2410_GPCCON); - __raw_writel(0x0000014c, S3C2410_GPCDAT); - __raw_writel(0x0000fef2, S3C2410_GPCUP); - - /* GPD0 input -- unknown function - * GPD1-D7 LCD - * GPD8 N30 output -- unknown function - * N35/PiN output 1=GPS LED on - * GPD9 output 0=power led blinks red, 1=normal power led function - * GPD10 output -- unknown function - * GPD11-15 LCD drivers - */ - __raw_writel(0xaa95aaa4, S3C2410_GPDCON); - __raw_writel(0x00000601, S3C2410_GPDDAT); - __raw_writel(0x0000fbfe, S3C2410_GPDUP); - - /* GPE0-4 I2S audio bus - * GPE5-10 SD/MMC bus - * E11-13 outputs -- unknown function, probably power management - * E14-15 I2C bus connected to the battery controller - */ - __raw_writel(0xa56aaaaa, S3C2410_GPECON); - __raw_writel(0x0000efc5, S3C2410_GPEDAT); - __raw_writel(0x0000f81f, S3C2410_GPEUP); - - /* GPF0 input 0=power button pressed - * GPF1 input SD/MMC switch 0=card present - * GPF2 N30 1=reset button pressed (inverted compared to the rest) - * N35/PiN 0=reset button pressed - * GPF3 N30/PiN input -- unknown function - * N35 input GPS antenna position, 0=antenna closed, 1=open - * GPF4 input 0=button 4 pressed - * GPF5 input 0=button 3 pressed - * GPF6 input 0=button 2 pressed - * GPF7 input 0=button 1 pressed - */ - __raw_writel(0x0000aaaa, S3C2410_GPFCON); - __raw_writel(0x00000000, S3C2410_GPFDAT); - __raw_writel(0x000000ff, S3C2410_GPFUP); - - /* GPG0 input RS232 DCD/DSR/RI - * GPG1 input 1=USB gadget port has power from a host - * GPG2 N30 input -- unknown function - * N35/PiN input 0=headphones plugged in, 1=not plugged in - * GPG3 N30 output -- unknown function - * N35/PiN input with unknown function - * GPG4 N30 output 0=MMC enabled, 1=MMC disabled - * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled - * N35/PiN input joystick right - * GPG6 N30 output 0=blue led on, 1=off - * N35/PiN input joystick left - * GPG7 input 0=thumbwheel pressed - * GPG8 input 0=thumbwheel down - * GPG9 input 0=thumbwheel up - * GPG10 input SD/MMC write protect switch - * GPG11 N30 input -- unknown function - * N35 output 0=GPS antenna powered, 1=not powered - * PiN output -- unknown function - * GPG12-15 touch screen functions - * - * The pullups differ between the models, so enable all - * pullups that are enabled on any of the models. - */ - if (machine_is_n30()) - __raw_writel(0xff0a956a, S3C2410_GPGCON); - if (machine_is_n35()) - __raw_writel(0xff4aa92a, S3C2410_GPGCON); - __raw_writel(0x0000e800, S3C2410_GPGDAT); - __raw_writel(0x0000f86f, S3C2410_GPGUP); - - /* GPH0/1/2/3 RS232 serial port - * GPH4/5 IrDA serial port - * GPH6/7 N30 BlueTooth serial port - * N35/PiN GPS receiver - * GPH8 input -- unknown function - * GPH9 CLKOUT0 HCLK -- unknown use - * GPH10 CLKOUT1 FCLK -- unknown use - * - * The pull ups for H6/H7 are enabled on N30 but not on the - * N35/PiN. I suppose is useful for a budget model of the N30 - * with no bluetooth. It doesn't hurt to have the pull ups - * enabled on the N35, so leave them enabled for all models. - */ - __raw_writel(0x0028aaaa, S3C2410_GPHCON); - __raw_writel(0x000005ef, S3C2410_GPHDAT); - __raw_writel(0x0000063f, S3C2410_GPHUP); -} - -static void __init n30_map_io(void) -{ - s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); - n30_hwinit(); - s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init n30_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -/* GPB3 is the line that controls the pull-up for the USB D+ line */ - -static void __init n30_init(void) -{ - WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power")); - - s3c24xx_fb_set_platdata(&n30_fb_info); - gpiod_add_lookup_table(&n30_udc_gpio_table); - s3c24xx_udc_set_platdata(&n30_udc_cfg); - gpiod_add_lookup_table(&n30_mci_gpio_table); - s3c24xx_mci_set_platdata(&n30_mci_cfg); - s3c_i2c0_set_platdata(&n30_i2ccfg); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - if (machine_is_n30()) { - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - /* Disable pull-up and add GPIO tables */ - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - gpiod_add_lookup_table(&n30_blue_led_gpio_table); - gpiod_add_lookup_table(&n30_warning_led_gpio_table); - - platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices)); - } - - if (machine_is_n35()) { - /* Turn off suspend and switch the selectable USB port - * to USB device mode. Turn on suspend for the host - * port since it is not connected on the N35. - * - * Actually, the host port is available at some pads - * on the back of the device, so it would actually be - * possible to add a USB device inside the N35 if you - * are willing to do some hardware modifications. */ - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, - S3C2410_MISCCR_USBSUSPND0); - - /* Disable pull-up and add GPIO tables */ - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - gpiod_add_lookup_table(&n35_blue_led_gpio_table); - gpiod_add_lookup_table(&n35_warning_led_gpio_table); - - platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); - } -} - -MACHINE_START(N30, "Acer-N30") - /* Maintainer: Christer Weinigel <christer@weinigel.se>, - Ben Dooks <ben-linux@fluff.org> - */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .init_time = n30_init_time, - .init_machine = n30_init, - .init_irq = s3c2410_init_irq, - .map_io = n30_map_io, -MACHINE_END - -MACHINE_START(N35, "Acer-N35") - /* Maintainer: Christer Weinigel <christer@weinigel.se> - */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .init_time = n30_init_time, - .init_machine = n30_init, - .init_irq = s3c2410_init_irq, - .map_io = n30_map_io, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c deleted file mode 100644 index d17a3fcb7425..000000000000 --- a/arch/arm/mach-s3c/mach-nexcoder.c +++ /dev/null @@ -1,162 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// linux/arch/arm/mach-s3c2440/mach-nexcoder.c -// -// Copyright (c) 2004 Nex Vision -// Guillaume GOURAT <guillaume.gourat@nexvision.tv> -// -// Modifications: -// 15-10-2004 GG Created initial version -// 12-03-2005 BJD Updated for release - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/string.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mtd/map.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -//#include <asm/debug-ll.h> -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include <linux/platform_data/i2c-s3c2410.h> - -#include "gpio-cfg.h" -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" - -static struct map_desc nexcoder_iodesc[] __initdata = { - /* nothing here yet */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NOR Flash on NexVision NexCoder 2440 board */ - -static struct resource nexcoder_nor_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M), -}; - -static struct map_info nexcoder_nor_map = { - .bankwidth = 2, -}; - -static struct platform_device nexcoder_device_nor = { - .name = "mtd-flash", - .id = -1, - .num_resources = ARRAY_SIZE(nexcoder_nor_resource), - .resource = nexcoder_nor_resource, - .dev = - { - .platform_data = &nexcoder_nor_map, - } -}; - -/* Standard Nexcoder devices */ - -static struct platform_device *nexcoder_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_camif, - &s3c_device_spi0, - &s3c_device_spi1, - &nexcoder_device_nor, -}; - -static void __init nexcoder_sensorboard_init(void) -{ - /* Initialize SCCB bus */ - gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPE(14)); /* IICSCL */ - gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPE(15)); /* IICSDA */ - - /* Power up the sensor board */ - gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */ - gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); - gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */ -} - -static void __init nexcoder_map_io(void) -{ - s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); - - nexcoder_sensorboard_init(); -} - -static void __init nexcoder_init_time(void) -{ - s3c2440_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init nexcoder_init(void) -{ - s3c_i2c0_set_platdata(NULL); - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); -}; - -MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = nexcoder_map_io, - .init_machine = nexcoder_init, - .init_irq = s3c2440_init_irq, - .init_time = nexcoder_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c deleted file mode 100644 index 2e283aedab65..000000000000 --- a/arch/arm/mach-s3c/mach-osiris-dvs.c +++ /dev/null @@ -1,178 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2009 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// Simtec Osiris Dynamic Voltage Scaling support. - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/cpufreq.h> -#include <linux/gpio.h> - -#include <linux/mfd/tps65010.h> - -#include <linux/soc/samsung/s3c-cpu-freq.h> -#include "gpio-samsung.h" - -#define OSIRIS_GPIO_DVS S3C2410_GPB(5) - -static bool dvs_en; - -static void osiris_dvs_tps_setdvs(bool on) -{ - unsigned vregs1 = 0, vdcdc2 = 0; - - if (!on) { - vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; - vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ - } - - dvs_en = on; - vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; - vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; - - tps65010_config_vregs1(vregs1); - tps65010_config_vdcdc2(vdcdc2); -} - -static bool is_dvs(struct s3c_freq *f) -{ - /* at the moment, we assume ARMCLK = HCLK => DVS */ - return f->armclk == f->hclk; -} - -/* keep track of current state */ -static bool cur_dvs = false; - -static int osiris_dvs_notify(struct notifier_block *nb, - unsigned long val, void *data) -{ - struct cpufreq_freqs *cf = data; - struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); - bool old_dvs = is_dvs(&freqs->old); - bool new_dvs = is_dvs(&freqs->new); - int ret = 0; - - if (!dvs_en) - return 0; - - printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, - freqs->old.armclk, freqs->old.hclk, - freqs->new.armclk, freqs->new.hclk); - - switch (val) { - case CPUFREQ_PRECHANGE: - if ((old_dvs && !new_dvs) || - (cur_dvs && !new_dvs)) { - pr_debug("%s: exiting dvs\n", __func__); - cur_dvs = false; - gpio_set_value(OSIRIS_GPIO_DVS, 1); - } - break; - case CPUFREQ_POSTCHANGE: - if ((!old_dvs && new_dvs) || - (!cur_dvs && new_dvs)) { - pr_debug("entering dvs\n"); - cur_dvs = true; - gpio_set_value(OSIRIS_GPIO_DVS, 0); - } - break; - } - - return ret; -} - -static struct notifier_block osiris_dvs_nb = { - .notifier_call = osiris_dvs_notify, -}; - -static int osiris_dvs_probe(struct platform_device *pdev) -{ - int ret; - - dev_info(&pdev->dev, "initialising\n"); - - ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); - if (ret) { - dev_err(&pdev->dev, "cannot claim gpio\n"); - goto err_nogpio; - } - - /* start with dvs disabled */ - gpio_direction_output(OSIRIS_GPIO_DVS, 1); - - ret = cpufreq_register_notifier(&osiris_dvs_nb, - CPUFREQ_TRANSITION_NOTIFIER); - if (ret) { - dev_err(&pdev->dev, "failed to register with cpufreq\n"); - goto err_nofreq; - } - - osiris_dvs_tps_setdvs(true); - - return 0; - -err_nofreq: - gpio_free(OSIRIS_GPIO_DVS); - -err_nogpio: - return ret; -} - -static int osiris_dvs_remove(struct platform_device *pdev) -{ - dev_info(&pdev->dev, "exiting\n"); - - /* disable any current dvs */ - gpio_set_value(OSIRIS_GPIO_DVS, 1); - osiris_dvs_tps_setdvs(false); - - cpufreq_unregister_notifier(&osiris_dvs_nb, - CPUFREQ_TRANSITION_NOTIFIER); - - gpio_free(OSIRIS_GPIO_DVS); - - return 0; -} - -/* the CONFIG_PM block is so small, it isn't worth actually compiling it - * out if the configuration isn't set. */ - -static int osiris_dvs_suspend(struct device *dev) -{ - gpio_set_value(OSIRIS_GPIO_DVS, 1); - osiris_dvs_tps_setdvs(false); - cur_dvs = false; - - return 0; -} - -static int osiris_dvs_resume(struct device *dev) -{ - osiris_dvs_tps_setdvs(true); - return 0; -} - -static const struct dev_pm_ops osiris_dvs_pm = { - .suspend = osiris_dvs_suspend, - .resume = osiris_dvs_resume, -}; - -static struct platform_driver osiris_dvs_driver = { - .probe = osiris_dvs_probe, - .remove = osiris_dvs_remove, - .driver = { - .name = "osiris-dvs", - .pm = &osiris_dvs_pm, - }, -}; - -module_platform_driver(osiris_dvs_driver); - -MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:osiris-dvs"); diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c deleted file mode 100644 index d900d1354de1..000000000000 --- a/arch/arm/mach-s3c/mach-osiris.c +++ /dev/null @@ -1,405 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2005-2008 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/clk.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <linux/mfd/tps65010.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/irq.h> - -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include "cpu.h" -#include <linux/soc/samsung/s3c-cpu-freq.h> -#include "devs.h" -#include "gpio-cfg.h" - -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "s3c24xx.h" -#include "osiris.h" -#include "regs-mem-s3c24xx.h" - -/* onboard perihperal map */ - -static struct map_desc osiris_iodesc[] __initdata = { - /* ISA IO areas (may be over-written later) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, - }, - - /* CPLD control registers */ - - { - .virtual = (u32)OSIRIS_VA_CTRL0, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_CTRL1, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_CTRL2, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_IDREG, - .pfn = __phys_to_pfn(OSIRIS_PA_IDREG), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, - } -}; - -/* NAND Flash on Osiris board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition __initdata osiris_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition __initdata osiris_default_nand_part_large[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_128K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_128K, - .offset = SZ_128K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Osiris has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, -}; - -static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(OSIRIS_VA_CTRL0); - tmp &= ~OSIRIS_CTRL0_NANDSEL; - tmp |= slot; - - pr_debug("osiris_nand: ctrl0 now %02x\n", tmp); - - __raw_writeb(tmp, OSIRIS_VA_CTRL0); -} - -static struct s3c2410_platform_nand __initdata osiris_nand_info = { - .tacls = 25, - .twrph0 = 60, - .twrph1 = 60, - .nr_sets = ARRAY_SIZE(osiris_nand_sets), - .sets = osiris_nand_sets, - .select_chip = osiris_nand_select, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* PCMCIA control and configuration */ - -static struct resource osiris_pcmcia_resource[] = { - [0] = DEFINE_RES_MEM(0x0f000000, SZ_1M), - [1] = DEFINE_RES_MEM(0x0c000000, SZ_1M), -}; - -static struct platform_device osiris_pcmcia = { - .name = "osiris-pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), - .resource = osiris_pcmcia_resource, -}; - -/* Osiris power management device */ - -#ifdef CONFIG_PM -static unsigned char pm_osiris_ctrl0; - -static int osiris_pm_suspend(void) -{ - unsigned int tmp; - - pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0); - tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL; - - /* ensure correct NAND slot is selected on resume */ - if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0) - tmp |= 2; - - __raw_writeb(tmp, OSIRIS_VA_CTRL0); - - /* ensure that an nRESET is not generated on resume. */ - gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPA(21)); - - return 0; -} - -static void osiris_pm_resume(void) -{ - if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8) - __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1); - - __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); -} - -#else -#define osiris_pm_suspend NULL -#define osiris_pm_resume NULL -#endif - -static struct syscore_ops osiris_pm_syscore_ops = { - .suspend = osiris_pm_suspend, - .resume = osiris_pm_resume, -}; - -/* Link for DVS driver to TPS65011 */ - -static void osiris_tps_release(struct device *dev) -{ - /* static device, do not need to release anything */ -} - -static struct platform_device osiris_tps_device = { - .name = "osiris-dvs", - .id = -1, - .dev.release = osiris_tps_release, -}; - -static int osiris_tps_setup(struct i2c_client *client, void *context) -{ - osiris_tps_device.dev.parent = &client->dev; - return platform_device_register(&osiris_tps_device); -} - -static int osiris_tps_remove(struct i2c_client *client, void *context) -{ - platform_device_unregister(&osiris_tps_device); - return 0; -} - -static struct tps65010_board osiris_tps_board = { - .base = -1, /* GPIO can go anywhere at the moment */ - .setup = osiris_tps_setup, - .teardown = osiris_tps_remove, -}; - -/* I2C devices fitted. */ - -static struct i2c_board_info osiris_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tps65011", 0x48), - .irq = IRQ_EINT20, - .platform_data = &osiris_tps_board, - }, -}; - -/* Standard Osiris devices */ - -static struct platform_device *osiris_devices[] __initdata = { - &s3c2410_device_dclk, - &s3c_device_i2c0, - &s3c_device_wdt, - &s3c_device_nand, - &osiris_pcmcia, -}; - -static struct s3c_cpufreq_board __initdata osiris_cpufreq = { - .refresh = 7800, /* refresh period is 7.8usec */ - .auto_io = 1, - .need_io = 1, -}; - -static void __init osiris_map_io(void) -{ - unsigned long flags; - - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); - - /* check for the newer revision boards with large page nand */ - - if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) { - printk(KERN_INFO "OSIRIS-B detected (revision %d)\n", - __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK); - osiris_nand_sets[0].partitions = osiris_default_nand_part_large; - osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); - } else { - /* write-protect line to the NAND */ - gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPA(0)); - } - - /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ - - local_irq_save(flags); - __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); - local_irq_restore(flags); -} - -static void __init osiris_init_time(void) -{ - s3c2440_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init osiris_init(void) -{ - register_syscore_ops(&osiris_pm_syscore_ops); - - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&osiris_nand_info); - - s3c_cpufreq_setboard(&osiris_cpufreq); - - i2c_register_board_info(0, osiris_i2c_devs, - ARRAY_SIZE(osiris_i2c_devs)); - - platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices)); -}; - -MACHINE_START(OSIRIS, "Simtec-OSIRIS") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = osiris_map_io, - .init_irq = s3c2440_init_irq, - .init_machine = osiris_init, - .init_time = osiris_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c deleted file mode 100644 index 3a2db2f58833..000000000000 --- a/arch/arm/mach-s3c/mach-otom.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2004 Nex Vision -// Guillaume GOURAT <guillaume.gourat@nexvision.fr> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/platform_data/i2c-s3c2410.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include "cpu.h" -#include "devs.h" - -#include "s3c24xx.h" -#include "otom.h" - -static struct map_desc otom11_iodesc[] __initdata = { - /* Device area */ - { (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE }, -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - /* port 2 is not actually used */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NOR Flash on NexVision OTOM board */ - -static struct resource otom_nor_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M), -}; - -static struct platform_device otom_device_nor = { - .name = "mtd-flash", - .id = -1, - .num_resources = ARRAY_SIZE(otom_nor_resource), - .resource = otom_nor_resource, -}; - -/* Standard OTOM devices */ - -static struct platform_device *otom11_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &otom_device_nor, -}; - -static void __init otom11_map_io(void) -{ - s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init otom11_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init otom11_init(void) -{ - s3c_i2c0_set_platdata(NULL); - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); -} - -MACHINE_START(OTOM, "Nex Vision - Otom 1.1") - /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = otom11_map_io, - .init_machine = otom11_init, - .init_irq = s3c2410_init_irq, - .init_time = otom11_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c deleted file mode 100644 index 36fe0684a438..000000000000 --- a/arch/arm/mach-s3c/mach-qt2410.c +++ /dev/null @@ -1,375 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2006 by OpenMoko, Inc. -// Author: Harald Welte <laforge@openmoko.org> -// All rights reserved. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/leds-s3c24xx.h> -#include <linux/platform_data/fb-s3c2410.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include "gpio-samsung.h" - -#include "gpio-cfg.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc qt2410_iodesc[] __initdata = { - { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2410_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* LCD driver info */ - -static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = { - { - /* Configuration for 640x480 SHARP LQ080V3DG01 */ - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 40000, /* HCLK/4 */ - .xres = 640, - .yres = 480, - .bpp = 16, - .left_margin = 44, - .right_margin = 116, - .hsync_len = 96, - .upper_margin = 19, - .lower_margin = 11, - .vsync_len = 15, - }, - { - /* Configuration for 480x640 toppoly TD028TTEC1 */ - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 480, - .height = 640, - .pixclock = 40000, /* HCLK/4 */ - .xres = 480, - .yres = 640, - .bpp = 16, - .left_margin = 8, - .right_margin = 24, - .hsync_len = 8, - .upper_margin = 2, - .lower_margin = 4, - .vsync_len = 2, - }, - { - /* Config for 240x320 LCD */ - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .pixclock = 100000, /* HCLK/10 */ - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 13, - .right_margin = 8, - .hsync_len = 4, - .upper_margin = 2, - .lower_margin = 7, - .vsync_len = 4, - }, -}; - - -static struct s3c2410fb_mach_info qt2410_fb_info __initdata = { - .displays = qt2410_lcd_cfg, - .num_displays = ARRAY_SIZE(qt2410_lcd_cfg), - .default_display = 0, - - .lpcsel = ((0xCE6) & ~7) | 1<<4, -}; - -/* CS8900 */ - -static struct resource qt2410_cs89x0_resources[] = { - [0] = DEFINE_RES_MEM(0x19000000, 17), - [1] = DEFINE_RES_IRQ(IRQ_EINT9), -}; - -static struct platform_device qt2410_cs89x0 = { - .name = "cirrus-cs89x0", - .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources), - .resource = qt2410_cs89x0_resources, -}; - -/* LED */ - -static struct gpiod_lookup_table qt2410_led_gpio_table = { - .dev_id = "s3c24xx_led.0", - .table = { - GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN), - { }, - }, -}; - -static struct s3c24xx_led_platdata qt2410_pdata_led = { - .name = "led", - .def_trigger = "timer", -}; - -static struct platform_device qt2410_led = { - .name = "s3c24xx_led", - .id = 0, - .dev = { - .platform_data = &qt2410_pdata_led, - }, -}; - -/* SPI */ - -static struct spi_gpio_platform_data spi_gpio_cfg = { - .num_chipselect = 1, -}; - -static struct platform_device qt2410_spi = { - .name = "spi_gpio", - .id = 1, - .dev.platform_data = &spi_gpio_cfg, -}; - -static struct gpiod_lookup_table qt2410_spi_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("GPIOG", 7, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOG", 6, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOG", 5, - "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOB", 5, - "cs", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table qt2410_mmc_gpiod_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* Board devices */ - -static struct platform_device *qt2410_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_sdi, - &s3c_device_usbgadget, - &qt2410_spi, - &qt2410_cs89x0, - &qt2410_led, -}; - -static struct mtd_partition __initdata qt2410_nand_part[] = { - [0] = { - .name = "U-Boot", - .size = 0x30000, - .offset = 0, - }, - [1] = { - .name = "U-Boot environment", - .offset = 0x30000, - .size = 0x4000, - }, - [2] = { - .name = "kernel", - .offset = 0x34000, - .size = SZ_2M, - }, - [3] = { - .name = "initrd", - .offset = 0x234000, - .size = SZ_4M, - }, - [4] = { - .name = "jffs2", - .offset = 0x634000, - .size = 0x39cc000, - }, -}; - -static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(qt2410_nand_part), - .partitions = qt2410_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. - */ - -static struct s3c2410_platform_nand __initdata qt2410_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(qt2410_nand_sets), - .sets = qt2410_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -/* UDC */ - -static struct s3c2410_udc_mach_info qt2410_udc_cfg = { -}; - -static char tft_type = 's'; - -static int __init qt2410_tft_setup(char *str) -{ - tft_type = str[0]; - return 1; -} - -__setup("tft=", qt2410_tft_setup); - -static void __init qt2410_map_io(void) -{ - s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init qt2410_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init qt2410_machine_init(void) -{ - s3c_nand_set_platdata(&qt2410_nand_info); - - switch (tft_type) { - case 'p': /* production */ - qt2410_fb_info.default_display = 1; - break; - case 'b': /* big */ - qt2410_fb_info.default_display = 0; - break; - case 's': /* small */ - default: - qt2410_fb_info.default_display = 2; - break; - } - s3c24xx_fb_set_platdata(&qt2410_fb_info); - - /* set initial state of the LED GPIO */ - WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); - gpio_free(S3C2410_GPB(0)); - - s3c24xx_udc_set_platdata(&qt2410_udc_cfg); - s3c_i2c0_set_platdata(NULL); - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - gpiod_add_lookup_table(&qt2410_spi_gpiod_table); - s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); - gpiod_add_lookup_table(&qt2410_led_gpio_table); - gpiod_add_lookup_table(&qt2410_mmc_gpiod_table); - platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); - s3c_pm_init(); -} - -MACHINE_START(QT2410, "QT2410") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = qt2410_map_io, - .init_irq = s3c2410_init_irq, - .init_machine = qt2410_machine_init, - .init_time = qt2410_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c deleted file mode 100644 index d8c49e562660..000000000000 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ /dev/null @@ -1,884 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, -// Copyright (c) 2007-2010 Vasily Khoruzhick -// -// based on smdk2440 written by Ben Dooks - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/memblock.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/device.h> -#include <linux/pda_power.h> -#include <linux/pwm_backlight.h> -#include <linux/pwm.h> -#include <linux/s3c_adc_battery.h> -#include <linux/leds.h> -#include <linux/i2c.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <linux/mmc/host.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/fb-s3c2410.h> - -#include <sound/uda1380.h> - -#include "hardware-s3c24xx.h" -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "cpu.h" -#include "devs.h" -#include "pm.h" -#include "gpio-cfg.h" - -#include "s3c24xx.h" -#include "h1940.h" - -#define LCD_PWM_PERIOD 192960 -#define LCD_PWM_DUTY 127353 - -static struct map_desc rx1950_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0xf1, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, -}; - -static struct s3c2410fb_display rx1950_display = { - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .xres = 240, - .yres = 320, - .bpp = 16, - - .pixclock = 260000, - .left_margin = 10, - .right_margin = 20, - .hsync_len = 10, - .upper_margin = 2, - .lower_margin = 2, - .vsync_len = 2, - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVCLK | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_HWSWP | - (0x02 << 13) | - (0x02 << 15), - -}; - -static int power_supply_init(struct device *dev) -{ - return gpio_request(S3C2410_GPF(2), "cable plugged"); -} - -static int rx1950_is_ac_online(void) -{ - return !gpio_get_value(S3C2410_GPF(2)); -} - -static void power_supply_exit(struct device *dev) -{ - gpio_free(S3C2410_GPF(2)); -} - -static char *rx1950_supplicants[] = { - "main-battery" -}; - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = rx1950_is_ac_online, - .exit = power_supply_exit, - .supplied_to = rx1950_supplicants, - .num_supplicants = ARRAY_SIZE(rx1950_supplicants), -}; - -static struct resource power_supply_resources[] = { - [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \ - | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE), -}; - -static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = - &power_supply_info, - }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), -}; - -static const struct s3c_adc_bat_thresh bat_lut_noac[] = { - { .volt = 4100, .cur = 156, .level = 100}, - { .volt = 4050, .cur = 156, .level = 95}, - { .volt = 4025, .cur = 141, .level = 90}, - { .volt = 3995, .cur = 144, .level = 85}, - { .volt = 3957, .cur = 162, .level = 80}, - { .volt = 3931, .cur = 147, .level = 75}, - { .volt = 3902, .cur = 147, .level = 70}, - { .volt = 3863, .cur = 153, .level = 65}, - { .volt = 3838, .cur = 150, .level = 60}, - { .volt = 3800, .cur = 153, .level = 55}, - { .volt = 3765, .cur = 153, .level = 50}, - { .volt = 3748, .cur = 172, .level = 45}, - { .volt = 3740, .cur = 153, .level = 40}, - { .volt = 3714, .cur = 175, .level = 35}, - { .volt = 3710, .cur = 156, .level = 30}, - { .volt = 3963, .cur = 156, .level = 25}, - { .volt = 3672, .cur = 178, .level = 20}, - { .volt = 3651, .cur = 178, .level = 15}, - { .volt = 3629, .cur = 178, .level = 10}, - { .volt = 3612, .cur = 162, .level = 5}, - { .volt = 3605, .cur = 162, .level = 0}, -}; - -static const struct s3c_adc_bat_thresh bat_lut_acin[] = { - { .volt = 4200, .cur = 0, .level = 100}, - { .volt = 4190, .cur = 0, .level = 99}, - { .volt = 4178, .cur = 0, .level = 95}, - { .volt = 4110, .cur = 0, .level = 70}, - { .volt = 4076, .cur = 0, .level = 65}, - { .volt = 4046, .cur = 0, .level = 60}, - { .volt = 4021, .cur = 0, .level = 55}, - { .volt = 3999, .cur = 0, .level = 50}, - { .volt = 3982, .cur = 0, .level = 45}, - { .volt = 3965, .cur = 0, .level = 40}, - { .volt = 3957, .cur = 0, .level = 35}, - { .volt = 3948, .cur = 0, .level = 30}, - { .volt = 3936, .cur = 0, .level = 25}, - { .volt = 3927, .cur = 0, .level = 20}, - { .volt = 3906, .cur = 0, .level = 15}, - { .volt = 3880, .cur = 0, .level = 10}, - { .volt = 3829, .cur = 0, .level = 5}, - { .volt = 3820, .cur = 0, .level = 0}, -}; - -static struct gpiod_lookup_table rx1950_bat_gpio_table = { - .dev_id = "s3c-adc-battery", - .table = { - /* Charge status S3C2410_GPF(3) */ - GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static int rx1950_bat_init(void) -{ - int ret; - - ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1"); - if (ret) - goto err_gpio1; - ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2"); - if (ret) - goto err_gpio2; - - return 0; - -err_gpio2: - gpio_free(S3C2410_GPJ(2)); -err_gpio1: - return ret; -} - -static void rx1950_bat_exit(void) -{ - gpio_free(S3C2410_GPJ(2)); - gpio_free(S3C2410_GPJ(3)); -} - -static void rx1950_enable_charger(void) -{ - gpio_direction_output(S3C2410_GPJ(2), 1); - gpio_direction_output(S3C2410_GPJ(3), 1); -} - -static void rx1950_disable_charger(void) -{ - gpio_direction_output(S3C2410_GPJ(2), 0); - gpio_direction_output(S3C2410_GPJ(3), 0); -} - -static DEFINE_SPINLOCK(rx1950_blink_spin); - -static int rx1950_led_blink_set(struct gpio_desc *desc, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - int gpio = desc_to_gpio(desc); - int blink_gpio, check_gpio; - - switch (gpio) { - case S3C2410_GPA(6): - blink_gpio = S3C2410_GPA(4); - check_gpio = S3C2410_GPA(3); - break; - case S3C2410_GPA(7): - blink_gpio = S3C2410_GPA(3); - check_gpio = S3C2410_GPA(4); - break; - default: - return -EINVAL; - } - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = 500; - - spin_lock(&rx1950_blink_spin); - - switch (state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - if (!gpio_get_value(check_gpio)) - gpio_set_value(S3C2410_GPJ(6), 0); - gpio_set_value(blink_gpio, 0); - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - gpio_set_value(gpio, 0); - gpio_set_value(S3C2410_GPJ(6), 1); - gpio_set_value(blink_gpio, 1); - break; - } - - spin_unlock(&rx1950_blink_spin); - - return 0; -} - -static struct gpio_led rx1950_leds_desc[] = { - { - .name = "Green", - .default_trigger = "main-battery-full", - .gpio = S3C2410_GPA(6), - .retain_state_suspended = 1, - }, - { - .name = "Red", - .default_trigger - = "main-battery-charging-blink-full-solid", - .gpio = S3C2410_GPA(7), - .retain_state_suspended = 1, - }, - { - .name = "Blue", - .default_trigger = "rx1950-acx-mem", - .gpio = S3C2410_GPA(11), - .retain_state_suspended = 1, - }, -}; - -static struct gpio_led_platform_data rx1950_leds_pdata = { - .num_leds = ARRAY_SIZE(rx1950_leds_desc), - .leds = rx1950_leds_desc, - .gpio_blink_set = rx1950_led_blink_set, -}; - -static struct platform_device rx1950_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &rx1950_leds_pdata, - }, -}; - -static struct s3c_adc_bat_pdata rx1950_bat_cfg = { - .init = rx1950_bat_init, - .exit = rx1950_bat_exit, - .enable_charger = rx1950_enable_charger, - .disable_charger = rx1950_disable_charger, - .lut_noac = bat_lut_noac, - .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), - .lut_acin = bat_lut_acin, - .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), - .volt_channel = 0, - .current_channel = 1, - .volt_mult = 4235, - .current_mult = 2900, - .internal_impedance = 200, -}; - -static struct platform_device rx1950_battery = { - .name = "s3c-adc-battery", - .id = -1, - .dev = { - .parent = &s3c_device_adc.dev, - .platform_data = &rx1950_bat_cfg, - }, -}; - -static struct s3c2410fb_mach_info rx1950_lcd_cfg = { - .displays = &rx1950_display, - .num_displays = 1, - .default_display = 0, - - .lpcsel = 0x02, - .gpccon = 0xaa9556a9, - .gpccon_mask = 0xffc003fc, - .gpccon_reg = S3C2410_GPCCON, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpcup_reg = S3C2410_GPCUP, - - .gpdcon = 0xaa90aaa1, - .gpdcon_mask = 0xffc0fff0, - .gpdcon_reg = S3C2410_GPDCON, - .gpdup = 0x0000fcfd, - .gpdup_mask = 0xffffffff, - .gpdup_reg = S3C2410_GPDUP, -}; - -static struct pwm_lookup rx1950_pwm_lookup[] = { - PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000, - PWM_POLARITY_NORMAL), - PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD, - PWM_POLARITY_NORMAL), -}; - -static struct pwm_device *lcd_pwm; -static struct pwm_state lcd_pwm_state; - -static void rx1950_lcd_power(int enable) -{ - int i; - static int enabled; - if (enabled == enable) - return; - if (!enable) { - - /* GPC11-GPC15->OUTPUT */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPC(i), 1); - - /* Wait a bit here... */ - mdelay(100); - - /* GPD2-GPD7->OUTPUT */ - /* GPD11-GPD15->OUTPUT */ - /* GPD2-GPD7->1, GPD11-GPD15->1 */ - for (i = 2; i < 8; i++) - gpio_direction_output(S3C2410_GPD(i), 1); - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPD(i), 1); - - /* Wait a bit here...*/ - mdelay(100); - - /* GPB0->OUTPUT, GPB0->0 */ - gpio_direction_output(S3C2410_GPB(0), 0); - - /* GPC1-GPC4->OUTPUT, GPC1-4->0 */ - for (i = 1; i < 5; i++) - gpio_direction_output(S3C2410_GPC(i), 0); - - /* GPC15-GPC11->0 */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPC(i), 0); - - /* GPD15-GPD11->0, GPD2->GPD7->0 */ - for (i = 11; i < 16; i++) - gpio_direction_output(S3C2410_GPD(i), 0); - - for (i = 2; i < 8; i++) - gpio_direction_output(S3C2410_GPD(i), 0); - - /* GPC6->0, GPC7->0, GPC5->0 */ - gpio_direction_output(S3C2410_GPC(6), 0); - gpio_direction_output(S3C2410_GPC(7), 0); - gpio_direction_output(S3C2410_GPC(5), 0); - - /* GPB1->OUTPUT, GPB1->0 */ - gpio_direction_output(S3C2410_GPB(1), 0); - - lcd_pwm_state.enabled = false; - pwm_apply_state(lcd_pwm, &lcd_pwm_state); - - /* GPC0->0, GPC10->0 */ - gpio_direction_output(S3C2410_GPC(0), 0); - gpio_direction_output(S3C2410_GPC(10), 0); - } else { - lcd_pwm_state.enabled = true; - pwm_apply_state(lcd_pwm, &lcd_pwm_state); - - gpio_direction_output(S3C2410_GPC(0), 1); - gpio_direction_output(S3C2410_GPC(5), 1); - - s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1); - gpio_direction_output(S3C2410_GPC(7), 1); - - for (i = 1; i < 5; i++) - s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); - - for (i = 11; i < 16; i++) - s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); - - for (i = 2; i < 8; i++) - s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); - - for (i = 11; i < 16; i++) - s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); - - gpio_direction_output(S3C2410_GPC(10), 1); - gpio_direction_output(S3C2410_GPC(6), 1); - } - enabled = enable; -} - -static void rx1950_bl_power(int enable) -{ - static int enabled; - if (enabled == enable) - return; - if (!enable) { - gpio_direction_output(S3C2410_GPB(0), 0); - } else { - /* LED driver need a "push" to power on */ - gpio_direction_output(S3C2410_GPB(0), 1); - /* Warm up backlight for one period of PWM. - * Without this trick its almost impossible to - * enable backlight with low brightness value - */ - ndelay(48000); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); - } - enabled = enable; -} - -static int rx1950_backlight_init(struct device *dev) -{ - WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); - lcd_pwm = pwm_get(dev, "RX1950 LCD"); - if (IS_ERR(lcd_pwm)) { - dev_err(dev, "Unable to request PWM for LCD power!\n"); - return PTR_ERR(lcd_pwm); - } - - /* - * Call pwm_init_state to initialize .polarity and .period. The other - * values are fixed in this driver. - */ - pwm_init_state(lcd_pwm, &lcd_pwm_state); - - lcd_pwm_state.duty_cycle = LCD_PWM_DUTY; - - rx1950_lcd_power(1); - rx1950_bl_power(1); - - return 0; -} - -static void rx1950_backlight_exit(struct device *dev) -{ - rx1950_bl_power(0); - rx1950_lcd_power(0); - - pwm_put(lcd_pwm); - gpio_free(S3C2410_GPB(0)); -} - - -static int rx1950_backlight_notify(struct device *dev, int brightness) -{ - if (!brightness) { - rx1950_bl_power(0); - rx1950_lcd_power(0); - } else { - rx1950_lcd_power(1); - rx1950_bl_power(1); - } - return brightness; -} - -static struct platform_pwm_backlight_data rx1950_backlight_data = { - .max_brightness = 24, - .dft_brightness = 4, - .init = rx1950_backlight_init, - .notify = rx1950_backlight_notify, - .exit = rx1950_backlight_exit, -}; - -static struct platform_device rx1950_backlight = { - .name = "pwm-backlight", - .dev = { - .parent = &samsung_device_pwm.dev, - .platform_data = &rx1950_backlight_data, - }, -}; - -static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd) -{ - s3c24xx_mci_def_set_power(power_mode, vdd); - - switch (power_mode) { - case MMC_POWER_OFF: - gpio_direction_output(S3C2410_GPJ(1), 0); - break; - case MMC_POWER_UP: - case MMC_POWER_ON: - gpio_direction_output(S3C2410_GPJ(1), 1); - break; - default: - break; - } -} - -static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = { - .set_power = rx1950_set_mmc_power, - .ocr_avail = MMC_VDD_32_33, -}; - -static struct gpiod_lookup_table rx1950_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* Card detect S3C2410_GPF(5) */ - GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW), - /* Write protect S3C2410_GPH(8) */ - GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW), - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct mtd_partition rx1950_nand_part[] = { - [0] = { - .name = "Boot0", - .offset = 0, - .size = 0x4000, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "Boot1", - .offset = MTDPART_OFS_APPEND, - .size = 0x40000, - .mask_flags = MTD_WRITEABLE, - }, - [2] = { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x300000, - .mask_flags = 0, - }, - [3] = { - .name = "Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct s3c2410_nand_set rx1950_nand_sets[] = { - [0] = { - .name = "Internal", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rx1950_nand_part), - .partitions = rx1950_nand_part, - }, -}; - -static struct s3c2410_platform_nand rx1950_nand_info = { - .tacls = 25, - .twrph0 = 50, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(rx1950_nand_sets), - .sets = rx1950_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table rx1950_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 3, -}; - -static struct gpio_keys_button rx1950_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S3C2410_GPF(0), - .active_low = 1, - .desc = "Power button", - .wakeup = 1, - }, - { - .code = KEY_F5, - .gpio = S3C2410_GPF(7), - .active_low = 1, - .desc = "Record button", - }, - { - .code = KEY_F1, - .gpio = S3C2410_GPG(0), - .active_low = 1, - .desc = "Calendar button", - }, - { - .code = KEY_F2, - .gpio = S3C2410_GPG(2), - .active_low = 1, - .desc = "Contacts button", - }, - { - .code = KEY_F3, - .gpio = S3C2410_GPG(3), - .active_low = 1, - .desc = "Mail button", - }, - { - .code = KEY_F4, - .gpio = S3C2410_GPG(7), - .active_low = 1, - .desc = "WLAN button", - }, - { - .code = KEY_LEFT, - .gpio = S3C2410_GPG(10), - .active_low = 1, - .desc = "Left button", - }, - { - .code = KEY_RIGHT, - .gpio = S3C2410_GPG(11), - .active_low = 1, - .desc = "Right button", - }, - { - .code = KEY_UP, - .gpio = S3C2410_GPG(4), - .active_low = 1, - .desc = "Up button", - }, - { - .code = KEY_DOWN, - .gpio = S3C2410_GPG(6), - .active_low = 1, - .desc = "Down button", - }, - { - .code = KEY_ENTER, - .gpio = S3C2410_GPG(9), - .active_low = 1, - .desc = "Ok button" - }, -}; - -static struct gpio_keys_platform_data rx1950_gpio_keys_data = { - .buttons = rx1950_gpio_keys_table, - .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table), -}; - -static struct platform_device rx1950_device_gpiokeys = { - .name = "gpio-keys", - .dev.platform_data = &rx1950_gpio_keys_data, -}; - -static struct uda1380_platform_data uda1380_info = { - .gpio_power = S3C2410_GPJ(0), - .gpio_reset = S3C2410_GPD(0), - .dac_clk = UDA1380_DAC_CLK_SYSCLK, -}; - -static struct i2c_board_info rx1950_i2c_devices[] = { - { - I2C_BOARD_INFO("uda1380", 0x1a), - .platform_data = &uda1380_info, - }, -}; - -static struct gpiod_lookup_table rx1950_audio_gpio_table = { - .dev_id = "rx1950-audio", - .table = { - GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device rx1950_audio = { - .name = "rx1950-audio", - .id = -1, -}; - -static struct platform_device *rx1950_devices[] __initdata = { - &s3c2410_device_dclk, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_sdi, - &s3c_device_adc, - &s3c_device_ts, - &samsung_device_pwm, - &rx1950_backlight, - &rx1950_device_gpiokeys, - &power_supply, - &rx1950_battery, - &rx1950_leds, - &rx1950_audio, -}; - -static void __init rx1950_map_io(void) -{ - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); - - /* setup PM */ - -#ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8); -#endif - - s3c_pm_init(); -} - -static void __init rx1950_init_time(void) -{ - s3c2442_init_clocks(16934000); - s3c24xx_timer_init(); -} - -static void __init rx1950_init_machine(void) -{ - int i; - - s3c24xx_fb_set_platdata(&rx1950_lcd_cfg); - s3c24xx_udc_set_platdata(&rx1950_udc_cfg); - s3c24xx_ts_set_platdata(&rx1950_ts_cfg); - gpiod_add_lookup_table(&rx1950_mmc_gpio_table); - s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&rx1950_nand_info); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - /* mmc power is disabled by default */ - WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power")); - gpio_direction_output(S3C2410_GPJ(1), 0); - - for (i = 0; i < 8; i++) - WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); - - for (i = 10; i < 16; i++) - WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); - - for (i = 2; i < 8; i++) - WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); - - for (i = 11; i < 16; i++) - WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); - - WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); - - WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink")); - WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink")); - WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink")); - gpio_direction_output(S3C2410_GPA(3), 0); - gpio_direction_output(S3C2410_GPA(4), 0); - gpio_direction_output(S3C2410_GPJ(6), 0); - - pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); - gpiod_add_lookup_table(&rx1950_udc_gpio_table); - gpiod_add_lookup_table(&rx1950_audio_gpio_table); - gpiod_add_lookup_table(&rx1950_bat_gpio_table); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); - - i2c_register_board_info(0, rx1950_i2c_devices, - ARRAY_SIZE(rx1950_i2c_devices)); -} - -/* H1940 and RX3715 need to reserve this for suspend */ -static void __init rx1950_reserve(void) -{ - memblock_reserve(0x30003000, 0x1000); - memblock_reserve(0x30081000, 0x1000); -} - -MACHINE_START(RX1950, "HP iPAQ RX1950") - /* Maintainers: Vasily Khoruzhick */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2442, - .map_io = rx1950_map_io, - .reserve = rx1950_reserve, - .init_irq = s3c2442_init_irq, - .init_machine = rx1950_init_machine, - .init_time = rx1950_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c deleted file mode 100644 index 52b3c38acbb2..000000000000 --- a/arch/arm/mach-s3c/mach-rx3715.c +++ /dev/null @@ -1,213 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2003-2004 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// https://www.handhelds.org/projects/rx3715.html - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/memblock.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/console.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/serial.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/fb-s3c2410.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include "cpu.h" -#include "devs.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "h1940.h" - -static struct map_desc rx3715_iodesc[] __initdata = { - /* dump ISA space somewhere unused */ - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -static struct s3c2410_uartcfg rx3715_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x00, - .clk_sel = S3C2410_UCON_CLKSEL3, - }, - /* IR port */ - [2] = { - .hwport = 2, - .uart_flags = UPF_CONS_FLOW, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - .clk_sel = S3C2410_UCON_CLKSEL3, - } -}; - -/* framebuffer lcd controller information */ - -static struct s3c2410fb_display rx3715_lcdcfg __initdata = { - .lcdcon5 = S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - - .pixclock = 260000, - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 36, - .right_margin = 36, - .hsync_len = 8, - .upper_margin = 6, - .lower_margin = 7, - .vsync_len = 3, -}; - -static struct s3c2410fb_mach_info rx3715_fb_info __initdata = { - - .displays = &rx3715_lcdcfg, - .num_displays = 1, - .default_display = 0, - - .lpcsel = 0xf82, - - .gpccon = 0xaa955699, - .gpccon_mask = 0xffc003cc, - .gpccon_reg = S3C2410_GPCCON, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpcup_reg = S3C2410_GPCUP, - - .gpdcon = 0xaa95aaa1, - .gpdcon_mask = 0xffc0fff0, - .gpdcon_reg = S3C2410_GPDCON, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, - .gpdup_reg = S3C2410_GPDUP, -}; - -static struct mtd_partition __initdata rx3715_nand_part[] = { - [0] = { - .name = "Whole Flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = { - [0] = { - .name = "Internal", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rx3715_nand_part), - .partitions = rx3715_nand_part, - }, -}; - -static struct s3c2410_platform_nand __initdata rx3715_nand_info = { - .tacls = 25, - .twrph0 = 50, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(rx3715_nand_sets), - .sets = rx3715_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -static struct platform_device *rx3715_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_nand, -}; - -static void __init rx3715_map_io(void) -{ - s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init rx3715_init_time(void) -{ - s3c2440_init_clocks(16934000); - s3c24xx_timer_init(); -} - -/* H1940 and RX3715 need to reserve this for suspend */ -static void __init rx3715_reserve(void) -{ - memblock_reserve(0x30003000, 0x1000); - memblock_reserve(0x30081000, 0x1000); -} - -static void __init rx3715_init_machine(void) -{ -#ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); -#endif - s3c_pm_init(); - - s3c_nand_set_platdata(&rx3715_nand_info); - s3c24xx_fb_set_platdata(&rx3715_fb_info); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); -} - -MACHINE_START(RX3715, "IPAQ-RX3715") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - .map_io = rx3715_map_io, - .reserve = rx3715_reserve, - .init_irq = s3c2440_init_irq, - .init_machine = rx3715_init_machine, - .init_time = rx3715_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c deleted file mode 100644 index 418544d3015d..000000000000 --- a/arch/arm/mach-s3c/mach-s3c2416-dt.c +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Samsung's S3C2416 flattened device tree enabled machine -// -// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> -// -// based on mach-exynos/mach-exynos4-dt.c -// -// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. -// http://www.samsung.com -// Copyright (c) 2010-2011 Linaro Ltd. -// www.linaro.org - -#include <linux/clocksource.h> -#include <linux/irqchip.h> -#include <linux/serial_s3c.h> - -#include <asm/mach/arch.h> -#include "map.h" - -#include "cpu.h" -#include "pm.h" - -#include "s3c24xx.h" - -static void __init s3c2416_dt_map_io(void) -{ - s3c24xx_init_io(NULL, 0); -} - -static void __init s3c2416_dt_machine_init(void) -{ - s3c_pm_init(); -} - -static const char *const s3c2416_dt_compat[] __initconst = { - "samsung,s3c2416", - "samsung,s3c2450", - NULL -}; - -DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") - /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ - .dt_compat = s3c2416_dt_compat, - .map_io = s3c2416_dt_map_io, - .init_irq = irqchip_init, - .init_machine = s3c2416_dt_machine_init, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c deleted file mode 100644 index 76b0a8846616..000000000000 --- a/arch/arm/mach-s3c/mach-smdk2410.c +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2004 by FS Forth-Systeme GmbH -// All rights reserved. -// -// @Author: Jonas Dietsche -// -// @History: -// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/i2c-s3c2410.h> - -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc smdk2410_iodesc[] __initdata = { - /* nothing here yet */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -static struct platform_device *smdk2410_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, -}; - -static void __init smdk2410_map_io(void) -{ - s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init smdk2410_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init smdk2410_init(void) -{ - s3c_i2c0_set_platdata(NULL); - platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - smdk_machine_init(); -} - -MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch - * to SMDK2410 */ - /* Maintainer: Jonas Dietsche */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = smdk2410_map_io, - .init_irq = s3c2410_init_irq, - .init_machine = smdk2410_init, - .init_time = smdk2410_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c deleted file mode 100644 index 2b4e20aaa346..000000000000 --- a/arch/arm/mach-s3c/mach-smdk2413.c +++ /dev/null @@ -1,169 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the -// loans of SMDK2413 to work with. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio/machine.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/memblock.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware/iomd.h> -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -//#include <asm/debug-ll.h> -#include "hardware-s3c24xx.h" -#include "regs-gpio.h" - -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/fb-s3c2410.h> -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc smdk2413_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - - -static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { -}; - -static struct gpiod_lookup_table smdk2413_udc_gpio_table = { - .dev_id = "s3c2410-usbgadget", - .table = { - GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device *smdk2413_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, - &s3c2412_device_dma, -}; - -static void __init smdk2413_fixup(struct tag *tags, char **cmdline) -{ - if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - memblock_add(0x30000000, SZ_64M); - } -} - -static void __init smdk2413_map_io(void) -{ - s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init smdk2413_init_time(void) -{ - s3c2412_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init smdk2413_machine_init(void) -{ /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - - gpiod_add_lookup_table(&smdk2413_udc_gpio_table); - s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); - s3c_i2c0_set_platdata(NULL); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); - smdk_machine_init(); -} - -MACHINE_START(S3C2413, "S3C2413") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2412, - - .fixup = smdk2413_fixup, - .init_irq = s3c2412_init_irq, - .map_io = smdk2413_map_io, - .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, -MACHINE_END - -MACHINE_START(SMDK2412, "SMDK2412") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2412, - - .fixup = smdk2413_fixup, - .init_irq = s3c2412_init_irq, - .map_io = smdk2413_map_io, - .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, -MACHINE_END - -MACHINE_START(SMDK2413, "SMDK2413") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2412, - - .fixup = smdk2413_fixup, - .init_irq = s3c2412_init_irq, - .map_io = smdk2413_map_io, - .init_machine = smdk2413_machine_init, - .init_time = smdk2413_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c deleted file mode 100644 index 329fe26be268..000000000000 --- a/arch/arm/mach-s3c/mach-smdk2416.c +++ /dev/null @@ -1,248 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, -// as part of OpenInkpot project -// Copyright (c) 2009 Promwad Innovation Company -// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/mtd/partitions.h> -#include <linux/gpio.h> -#include <linux/fb.h> -#include <linux/delay.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <video/samsung_fimd.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "hardware-s3c24xx.h" -#include "regs-gpio.h" -#include "regs-s3c2443-clock.h" -#include "gpio-samsung.h" - -#include <linux/platform_data/leds-s3c24xx.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "gpio-cfg.h" -#include "devs.h" -#include "cpu.h" -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include "sdhci.h" -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/s3c-hsudc.h> - -#include "fb.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc smdk2416_iodesc[] __initdata = { - /* ISA IO Space map (memory space selected by A24) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - } -}; - -#define UCON (S3C2410_UCON_DEFAULT | \ - S3C2440_UCON_PCLK | \ - S3C2443_UCON_RXERR_IRQEN) - -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) - -#define UFCON (S3C2410_UFCON_RXTRIG8 | \ - S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_TXTRIG16) - -static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON | 0x50, - .ufcon = UFCON, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -static void smdk2416_hsudc_gpio_init(void) -{ - s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1)); - s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0); -} - -static void smdk2416_hsudc_gpio_uninit(void) -{ - s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1); - s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0)); -} - -static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { - .epnum = 9, - .gpio_init = smdk2416_hsudc_gpio_init, - .gpio_uninit = smdk2416_hsudc_gpio_uninit, -}; - -static struct s3c_fb_pd_win smdk2416_fb_win[] = { - [0] = { - .default_bpp = 16, - .max_bpp = 32, - .xres = 800, - .yres = 480, - }, -}; - -static struct fb_videomode smdk2416_lcd_timing = { - .pixclock = 41094, - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static void s3c2416_fb_gpio_setup_24bpp(void) -{ - unsigned int gpio; - - for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } -} - -static struct s3c_fb_platdata smdk2416_fb_platdata = { - .win[0] = &smdk2416_fb_win[0], - .vtiming = &smdk2416_lcd_timing, - .setup_gpio = s3c2416_fb_gpio_setup_24bpp, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, -}; - -static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S3C2410_GPF(1), - .ext_cd_gpio_invert = 1, -}; - -static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct platform_device *smdk2416_devices[] __initdata = { - &s3c_device_fb, - &s3c_device_wdt, - &s3c_device_ohci, - &s3c_device_i2c0, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_usb_hsudc, - &s3c2443_device_dma, -}; - -static void __init smdk2416_init_time(void) -{ - s3c2416_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init smdk2416_map_io(void) -{ - s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init smdk2416_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_fb_set_platdata(&smdk2416_fb_platdata); - - s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata); - - s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata); - - gpio_request(S3C2410_GPB(4), "USBHost Power"); - gpio_direction_output(S3C2410_GPB(4), 1); - - gpio_request(S3C2410_GPB(3), "Display Power"); - gpio_direction_output(S3C2410_GPB(3), 1); - - gpio_request(S3C2410_GPB(1), "Display Reset"); - gpio_direction_output(S3C2410_GPB(1), 1); - - platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); - smdk_machine_init(); -} - -MACHINE_START(SMDK2416, "SMDK2416") - /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2416, - - .init_irq = s3c2416_init_irq, - .map_io = smdk2416_map_io, - .init_machine = smdk2416_machine_init, - .init_time = smdk2416_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c deleted file mode 100644 index 6aea769ebde1..000000000000 --- a/arch/arm/mach-s3c/mach-smdk2440.c +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// linux/arch/arm/mach-s3c2440/mach-smdk2440.c -// -// Copyright (c) 2004-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.fluff.org/ben/smdk2440/ -// -// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include <linux/platform_data/fb-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc smdk2440_iodesc[] __initdata = { - /* ISA IO Space map (memory space selected by A24) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - } -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - -/* LCD driver info */ - -static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = { - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - - .type = S3C2410_LCDCON1_TFT, - - .width = 240, - .height = 320, - - .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */ - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 20, - .right_margin = 8, - .hsync_len = 4, - .upper_margin = 8, - .lower_margin = 7, - .vsync_len = 4, -}; - -static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { - .displays = &smdk2440_lcd_cfg, - .num_displays = 1, - .default_display = 0, - -#if 0 - /* currently setup by downloader */ - .gpccon = 0xaa940659, - .gpccon_mask = 0xffffffff, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpdcon = 0xaa84aaa0, - .gpdcon_mask = 0xffffffff, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, - - .gpccon_reg = S3C2410_GPCCON, - .gpcup_reg = S3C2410_GPCUP, - .gpdcon_reg = S3C2410_GPDCON, - .gpdup_reg = S3C2410_GPDUP, -#endif - - .lpcsel = ((0xCE6) & ~7) | 1<<4, -}; - -static struct platform_device *smdk2440_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, -}; - -static void __init smdk2440_map_io(void) -{ - s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init smdk2440_init_time(void) -{ - s3c2440_init_clocks(16934400); - s3c24xx_timer_init(); -} - -static void __init smdk2440_machine_init(void) -{ - s3c24xx_fb_set_platdata(&smdk2440_fb_info); - s3c_i2c0_set_platdata(NULL); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); - smdk_machine_init(); -} - -MACHINE_START(S3C2440, "SMDK2440") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2440, - - .init_irq = s3c2440_init_irq, - .map_io = smdk2440_map_io, - .init_machine = smdk2440_machine_init, - .init_time = smdk2440_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c deleted file mode 100644 index 075140f8f760..000000000000 --- a/arch/arm/mach-s3c/mach-smdk2443.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2007 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.fluff.org/ben/smdk2443/ -// -// Thanks to Samsung for the loan of an SMDK2443 - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" - -#include <linux/platform_data/fb-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" -#include "common-smdk-s3c24xx.h" - -static struct map_desc smdk2443_iodesc[] __initdata = { - /* ISA IO Space map (memory space selected by A24) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - } -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - } -}; - -static struct platform_device *smdk2443_devices[] __initdata = { - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_hsmmc1, - &s3c2443_device_dma, -}; - -static void __init smdk2443_map_io(void) -{ - s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init smdk2443_init_time(void) -{ - s3c2443_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init smdk2443_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); - smdk_machine_init(); -} - -MACHINE_START(SMDK2443, "SMDK2443") - /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2443, - .init_irq = s3c2443_init_irq, - .map_io = smdk2443_map_io, - .init_machine = smdk2443_machine_init, - .init_time = smdk2443_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c deleted file mode 100644 index 93ab1abd8bd3..000000000000 --- a/arch/arm/mach-s3c/mach-tct_hammer.c +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2007 TinCanTools -// David Anders <danders@amltd.com> -// -// @History: -// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by -// Ben Dooks <ben@simtec.co.uk> - -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/flash.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/i2c-s3c2410.h> -#include "devs.h" -#include "cpu.h" - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> - -#include "s3c24xx.h" - -static struct resource tct_hammer_nor_resource = - DEFINE_RES_MEM(0x00000000, SZ_16M); - -static struct mtd_partition tct_hammer_mtd_partitions[] = { - { - .name = "System", - .size = 0x240000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "JFFS2", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data tct_hammer_flash_data = { - .width = 2, - .parts = tct_hammer_mtd_partitions, - .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions), -}; - -static struct platform_device tct_hammer_device_nor = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &tct_hammer_flash_data, - }, - .num_resources = 1, - .resource = &tct_hammer_nor_resource, -}; - -static struct map_desc tct_hammer_iodesc[] __initdata = { -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = { - .dev_id = "s3c2410-sdi", - .table = { - /* bus pins */ - GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct platform_device *tct_hammer_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_ohci, - &s3c_device_rtc, - &s3c_device_usbgadget, - &s3c_device_sdi, - &tct_hammer_device_nor, -}; - -static void __init tct_hammer_map_io(void) -{ - s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init tct_hammer_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init tct_hammer_init(void) -{ - s3c_i2c0_set_platdata(NULL); - gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table); - platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); -} - -MACHINE_START(TCT_HAMMER, "TCT_HAMMER") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = tct_hammer_map_io, - .init_irq = s3c2410_init_irq, - .init_machine = tct_hammer_init, - .init_time = tct_hammer_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c deleted file mode 100644 index c85033e6ef8f..000000000000 --- a/arch/arm/mach-s3c/mach-vr1000.c +++ /dev/null @@ -1,364 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2003-2008 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Machine support for Thorcom VR1000 board. Designed for Thorcom by -// Simtec Electronics, http://www.simtec.co.uk/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/dm9000.h> -#include <linux/i2c.h> - -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <linux/platform_data/leds-s3c24xx.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/asoc-s3c24xx_simtec.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include "cpu.h" -#include "devs.h" - -#include "bast.h" -#include "s3c24xx.h" -#include "simtec.h" -#include "vr1000.h" - -/* macros for virtual address mods for the io space entries */ -#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) -#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4) -#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3) -#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2) - -/* macros to modify the physical addresses for io space */ - -#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) -#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) -#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) -#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) - -static struct map_desc vr1000_iodesc[] __initdata = { - /* ISA IO areas */ - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = PA_CS2(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, - }, - - /* CPLD control registers, and external interrupt controls */ - { - .virtual = (u32)VR1000_VA_CTRL1, - .pfn = __phys_to_pfn(VR1000_PA_CTRL1), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)VR1000_VA_CTRL2, - .pfn = __phys_to_pfn(VR1000_PA_CTRL2), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)VR1000_VA_CTRL3, - .pfn = __phys_to_pfn(VR1000_PA_CTRL3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)VR1000_VA_CTRL4, - .pfn = __phys_to_pfn(VR1000_PA_CTRL4), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - /* port 2 is not actually used */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* definitions for the vr1000 extra 16550 serial ports */ - -#define VR1000_BAUDBASE (3692307) - -#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5)) - -static struct plat_serial8250_port serial_platform_data[] = { - [0] = { - .mapbase = VR1000_SERIAL_MAPBASE(0), - .irq = VR1000_IRQ_SERIAL + 0, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = VR1000_BAUDBASE, - }, - [1] = { - .mapbase = VR1000_SERIAL_MAPBASE(1), - .irq = VR1000_IRQ_SERIAL + 1, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = VR1000_BAUDBASE, - }, - [2] = { - .mapbase = VR1000_SERIAL_MAPBASE(2), - .irq = VR1000_IRQ_SERIAL + 2, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = VR1000_BAUDBASE, - }, - [3] = { - .mapbase = VR1000_SERIAL_MAPBASE(3), - .irq = VR1000_IRQ_SERIAL + 3, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = VR1000_BAUDBASE, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -/* DM9000 ethernet devices */ - -static struct resource vr1000_dm9k0_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4), - [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHLEVEL), -}; - -static struct resource vr1000_dm9k1_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4), - [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40), - [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHLEVEL), -}; - -/* for the moment we limit ourselves to 16bit IO until some - * better IO routines can be written and tested -*/ - -static struct dm9000_plat_data vr1000_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device vr1000_dm9k0 = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource), - .resource = vr1000_dm9k0_resource, - .dev = { - .platform_data = &vr1000_dm9k_platdata, - } -}; - -static struct platform_device vr1000_dm9k1 = { - .name = "dm9000", - .id = 1, - .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource), - .resource = vr1000_dm9k1_resource, - .dev = { - .platform_data = &vr1000_dm9k_platdata, - } -}; - -/* LEDS */ - -static struct gpiod_lookup_table vr1000_led1_gpio_table = { - .dev_id = "s3c24xx_led.1", - .table = { - GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table vr1000_led2_gpio_table = { - .dev_id = "s3c24xx_led.2", - .table = { - GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table vr1000_led3_gpio_table = { - .dev_id = "s3c24xx_led.3", - .table = { - GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct s3c24xx_led_platdata vr1000_led1_pdata = { - .name = "led1", - .def_trigger = "", -}; - -static struct s3c24xx_led_platdata vr1000_led2_pdata = { - .name = "led2", - .def_trigger = "", -}; - -static struct s3c24xx_led_platdata vr1000_led3_pdata = { - .name = "led3", - .def_trigger = "", -}; - -static struct platform_device vr1000_led1 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &vr1000_led1_pdata, - }, -}; - -static struct platform_device vr1000_led2 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &vr1000_led2_pdata, - }, -}; - -static struct platform_device vr1000_led3 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &vr1000_led3_pdata, - }, -}; - -/* I2C devices. */ - -static struct i2c_board_info vr1000_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, { - I2C_BOARD_INFO("tmp101", 0x48), - }, { - I2C_BOARD_INFO("m41st87", 0x68), - }, -}; - -/* devices for this board */ - -static struct platform_device *vr1000_devices[] __initdata = { - &s3c2410_device_dclk, - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_adc, - &serial_device, - &vr1000_dm9k0, - &vr1000_dm9k1, - &vr1000_led1, - &vr1000_led2, - &vr1000_led3, -}; - -static void vr1000_power_off(void) -{ - gpio_direction_output(S3C2410_GPB(9), 1); -} - -static void __init vr1000_map_io(void) -{ - pm_power_off = vr1000_power_off; - - s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init vr1000_init_time(void) -{ - s3c2410_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init vr1000_init(void) -{ - s3c_i2c0_set_platdata(NULL); - - /* Disable pull-up on LED lines and register GPIO lookups */ - s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE); - gpiod_add_lookup_table(&vr1000_led1_gpio_table); - gpiod_add_lookup_table(&vr1000_led2_gpio_table); - gpiod_add_lookup_table(&vr1000_led3_gpio_table); - - platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); - - i2c_register_board_info(0, vr1000_i2c_devs, - ARRAY_SIZE(vr1000_i2c_devs)); - - nor_simtec_init(); - simtec_audio_add(NULL, true, NULL); - - WARN_ON(gpio_request(S3C2410_GPB(9), "power off")); -} - -MACHINE_START(VR1000, "Thorcom-VR1000") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2410, - .map_io = vr1000_map_io, - .init_machine = vr1000_init, - .init_irq = s3c2410_init_irq, - .init_time = vr1000_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c deleted file mode 100644 index 6f878418be3e..000000000000 --- a/arch/arm/mach-s3c/mach-vstms.c +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// (C) 2006 Thomas Gleixner <tglx@linutronix.de> -// -// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand-ecc-sw-hamming.h> -#include <linux/mtd/partitions.h> -#include <linux/memblock.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include <linux/platform_data/fb-s3c2410.h> - -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> - -#include "devs.h" -#include "cpu.h" - -#include "s3c24xx.h" - -static struct map_desc vstms_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - } -}; - -static struct mtd_partition __initdata vstms_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = 0x7C000, - .offset = 0, - }, - [1] = { - .name = "UBoot Config", - .offset = 0x7C000, - .size = 0x4000, - }, - [2] = { - .name = "Kernel", - .offset = 0x80000, - .size = 0x200000, - }, - [3] = { - .name = "RFS", - .offset = 0x280000, - .size = 0x3d80000, - }, -}; - -static struct s3c2410_nand_set __initdata vstms_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(vstms_nand_part), - .partitions = vstms_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. -*/ - -static struct s3c2410_platform_nand __initdata vstms_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(vstms_nand_sets), - .sets = vstms_nand_sets, - .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, -}; - -static struct platform_device *vstms_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_nand, - &s3c2412_device_dma, -}; - -static void __init vstms_fixup(struct tag *tags, char **cmdline) -{ - if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - memblock_add(0x30000000, SZ_64M); - } -} - -static void __init vstms_map_io(void) -{ - s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); - s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); -} - -static void __init vstms_init_time(void) -{ - s3c2412_init_clocks(12000000); - s3c24xx_timer_init(); -} - -static void __init vstms_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_nand_set_platdata(&vstms_nand_info); - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); -} - -MACHINE_START(VSTMS, "VSTMS") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_S3C2412, - - .fixup = vstms_fixup, - .init_irq = s3c2412_init_irq, - .init_machine = vstms_init, - .map_io = vstms_map_io, - .init_time = vstms_init_time, -MACHINE_END diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h deleted file mode 100644 index f8d075b11d6f..000000000000 --- a/arch/arm/mach-s3c/map-s3c24xx.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - Memory map definitions - */ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H - -#include "map-base.h" -#include "map-s3c.h" - -/* - * interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* Timers */ -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_UART SZ_1M -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M -#define S3C24XX_SZ_GPIO SZ_1M - -/* USB host controller */ -#define S3C2410_PA_USBHOST (0x49000000) - -/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */ -#define S3C2416_PA_HSUDC (0x49800000) -#define S3C2416_SZ_HSUDC (SZ_4K) - -/* DMA controller */ -#define S3C2410_PA_DMA (0x4B000000) -#define S3C24XX_SZ_DMA SZ_1M - -/* Clock and Power management */ -#define S3C2410_PA_CLKPWR (0x4C000000) - -/* LCD controller */ -#define S3C2410_PA_LCD (0x4D000000) -#define S3C24XX_SZ_LCD SZ_1M - -/* NAND flash controller */ -#define S3C2410_PA_NAND (0x4E000000) - -/* IIC hardware controller */ -#define S3C2410_PA_IIC (0x54000000) - -/* IIS controller */ -#define S3C2410_PA_IIS (0x55000000) - -/* RTC */ -#define S3C2410_PA_RTC (0x57000000) -#define S3C24XX_SZ_RTC SZ_1M - -/* ADC */ -#define S3C2410_PA_ADC (0x58000000) - -/* SPI */ -#define S3C2410_PA_SPI (0x59000000) -#define S3C2443_PA_SPI0 (0x52000000) -#define S3C2443_PA_SPI1 S3C2410_PA_SPI -#define S3C2410_SPI1 (0x20) -#define S3C2412_SPI1 (0x100) - -/* SDI */ -#define S3C2410_PA_SDI (0x5A000000) - -/* CAMIF */ -#define S3C2440_PA_CAMIF (0x4F000000) -#define S3C2440_SZ_CAMIF SZ_1M - -/* AC97 */ - -#define S3C2440_PA_AC97 (0x5B000000) -#define S3C2440_SZ_AC97 SZ_1M - -/* S3C2443/S3C2416 High-speed SD/MMC */ -#define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2416_PA_HSMMC0 (0x4AC00000) - -#define S3C2443_PA_FB (0x4C800000) - -/* S3C2412 memory and IO controls */ -#define S3C2412_PA_SSMC (0x4F000000) - -#define S3C2412_PA_EBI (0x48800000) - -/* physical addresses of all the chip-select areas */ - -#define S3C2410_CS0 (0x00000000) -#define S3C2410_CS1 (0x08000000) -#define S3C2410_CS2 (0x10000000) -#define S3C2410_CS3 (0x18000000) -#define S3C2410_CS4 (0x20000000) -#define S3C2410_CS5 (0x28000000) -#define S3C2410_CS6 (0x30000000) -#define S3C2410_CS7 (0x38000000) - -#define S3C2410_SDRAM_PA (S3C2410_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2410_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL -#define S3C24XX_PA_DMA S3C2410_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_TIMER S3C2410_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG -#define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_RTC S3C2410_PA_RTC -#define S3C24XX_PA_ADC S3C2410_PA_ADC -#define S3C24XX_PA_SPI S3C2410_PA_SPI -#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1) -#define S3C24XX_PA_SDI S3C2410_PA_SDI -#define S3C24XX_PA_NAND S3C2410_PA_NAND - -#define S3C_PA_FB S3C2443_PA_FB -#define S3C_PA_IIC S3C2410_PA_IIC -#define S3C_PA_USBHOST S3C2410_PA_USBHOST -#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0 -#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC -#define S3C_PA_WDT S3C2410_PA_WATCHDOG -#define S3C_PA_NAND S3C24XX_PA_NAND - -#define S3C_PA_SPI0 S3C2443_PA_SPI0 -#define S3C_PA_SPI1 S3C2443_PA_SPI1 - -#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h deleted file mode 100644 index a14316729c48..000000000000 --- a/arch/arm/mach-s3c/nand-core-s3c24xx.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S3C - Nand Controller core functions - */ - -#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H -#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__ - -/* These functions are only for use with the core support code, such as - * the cpu specific initialisation code - */ - -/* re-define device name depending on support. */ -static inline void s3c_nand_setname(char *name) -{ -#ifdef CONFIG_S3C_DEV_NAND - s3c_device_nand.name = name; -#endif -} - -#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h deleted file mode 100644 index b6c9c5ed2ba7..000000000000 --- a/arch/arm/mach-s3c/osiris.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * OSIRIS - CPLD control constants - * OSIRIS - Memory map definitions - */ - -#ifndef __MACH_S3C24XX_OSIRIS_H -#define __MACH_S3C24XX_OSIRIS_H __FILE__ - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -/* start peripherals off after the S3C2410 */ - -#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) - -#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000) -#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD) - -#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000) -#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23)) - -#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000) -#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000) -#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) -#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) - -#endif /* __MACH_S3C24XX_OSIRIS_H */ diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c deleted file mode 100644 index 3fbc99eaa4a2..000000000000 --- a/arch/arm/mach-s3c/pll-s3c2410.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2006-2007 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// Vincent Sanders <vince@arm.linux.org.uk> -// -// S3C2410 CPU PLL tables - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -/* This array should be sorted in ascending order of the frequencies */ -static struct cpufreq_frequency_table pll_vals_12MHz[] = { - { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, - { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, - { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, - { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, - { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, - { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, - { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, - { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), }, - { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), }, - { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), }, - { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), }, - { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), }, - { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), }, - { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), }, - { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), }, - { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), }, - { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), }, - { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), }, - { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), }, - { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), }, - { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), }, - { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), }, - - /* 2410A extras */ - - { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), }, - { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), }, - { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), }, - { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), }, - { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), }, -}; - -static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) -{ - return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); -} - -static struct subsys_interface s3c2410_plls_interface = { - .name = "s3c2410_plls", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_plls_add, -}; - -static int __init s3c2410_pll_init(void) -{ - return subsys_interface_register(&s3c2410_plls_interface); - -} -arch_initcall(s3c2410_pll_init); - -static struct subsys_interface s3c2410a_plls_interface = { - .name = "s3c2410a_plls", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410_plls_add, -}; - -static int __init s3c2410a_pll_init(void) -{ - return subsys_interface_register(&s3c2410a_plls_interface); -} -arch_initcall(s3c2410a_pll_init); diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c deleted file mode 100644 index fdb8e8c2fe3b..000000000000 --- a/arch/arm/mach-s3c/pll-s3c2440-12000000.c +++ /dev/null @@ -1,95 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006-2007 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// Vincent Sanders <vince@arm.linux.org.uk> -// -// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -/* This array should be sorted in ascending order of the frequencies */ -static struct cpufreq_frequency_table s3c2440_plls_12[] = { - { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ - { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ - { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ - { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ - { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ - { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ - { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ - { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ - { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ - { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ - { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ - { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ - { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ - { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ - { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ - { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ - { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ - { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ - { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ - { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ - { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ - { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ - { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ - { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ - { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ - { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ - { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ -}; - -static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *xtal_clk; - unsigned long xtal; - - xtal_clk = clk_get(NULL, "xtal"); - if (IS_ERR(xtal_clk)) - return PTR_ERR(xtal_clk); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - if (xtal == 12000000) { - printk(KERN_INFO "Using PLL table for 12MHz crystal\n"); - return s3c_plltab_register(s3c2440_plls_12, - ARRAY_SIZE(s3c2440_plls_12)); - } - - return 0; -} - -static struct subsys_interface s3c2440_plls12_interface = { - .name = "s3c2440_plls12", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_plls12_add, -}; - -static int __init s3c2440_pll_12mhz(void) -{ - return subsys_interface_register(&s3c2440_plls12_interface); - -} -arch_initcall(s3c2440_pll_12mhz); - -static struct subsys_interface s3c2442_plls12_interface = { - .name = "s3c2442_plls12", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_plls12_add, -}; - -static int __init s3c2442_pll_12mhz(void) -{ - return subsys_interface_register(&s3c2442_plls12_interface); - -} -arch_initcall(s3c2442_pll_12mhz); diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c deleted file mode 100644 index 438b6fc099a4..000000000000 --- a/arch/arm/mach-s3c/pll-s3c2440-16934400.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006-2008 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// Vincent Sanders <vince@arm.linux.org.uk> -// -// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -/* This array should be sorted in ascending order of the frequencies */ -static struct cpufreq_frequency_table s3c2440_plls_169344[] = { - { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ - { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ - { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ - { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ - { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ - { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ - { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ - { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ - { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ - { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ - { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ - { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ - { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ - { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ - { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ - { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ - { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ - { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ - { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ - { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ - { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ - { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ - { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ - { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ - { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ - { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ - { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ - { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ - { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ - { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ - { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ - { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ - { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ - { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ - { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ - { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ - { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ - { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ - { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ - { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ - { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ - { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ - { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ - { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ - { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ - { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ - { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ - { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ - { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ - { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ - { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ - { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ - { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ - { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ - { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ -}; - -static int s3c2440_plls169344_add(struct device *dev, - struct subsys_interface *sif) -{ - struct clk *xtal_clk; - unsigned long xtal; - - xtal_clk = clk_get(NULL, "xtal"); - if (IS_ERR(xtal_clk)) - return PTR_ERR(xtal_clk); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - if (xtal == 169344000) { - printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n"); - return s3c_plltab_register(s3c2440_plls_169344, - ARRAY_SIZE(s3c2440_plls_169344)); - } - - return 0; -} - -static struct subsys_interface s3c2440_plls169344_interface = { - .name = "s3c2440_plls169344", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_plls169344_add, -}; - -static int __init s3c2440_pll_16934400(void) -{ - return subsys_interface_register(&s3c2440_plls169344_interface); -} -arch_initcall(s3c2440_pll_16934400); - -static struct subsys_interface s3c2442_plls169344_interface = { - .name = "s3c2442_plls169344", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_plls169344_add, -}; - -static int __init s3c2442_pll_16934400(void) -{ - return subsys_interface_register(&s3c2442_plls169344_interface); -} -arch_initcall(s3c2442_pll_16934400); diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h deleted file mode 100644 index a71ed5711019..000000000000 --- a/arch/arm/mach-s3c/pm-core-s3c24xx.h +++ /dev/null @@ -1,96 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c - */ - -#include <linux/delay.h> -#include <linux/io.h> - -#include "regs-clock.h" -#include "regs-irq-s3c24xx.h" -#include "irqs.h" - -static inline void s3c_pm_debug_init_uart(void) -{ -#ifdef CONFIG_SAMSUNG_PM_DEBUG - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -#endif -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ -} - -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ -static inline void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) -{ - int i; - - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if (which & (1L<<i)) { - S3C_PMDBG("IRQ %d asserted at resume\n", start+i); - } - } -} - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ - S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); -} - -static inline void s3c_pm_restored_gpios(void) { } -static inline void samsung_pm_saved_gpios(void) { } - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ -#ifdef CONFIG_PM_SLEEP -#define s3c_irqwake_intallow (1L << 30 | 0xfL) -#define s3c_irqwake_eintallow (0x0000fff0L) -#else -#define s3c_irqwake_eintallow 0 -#define s3c_irqwake_intallow 0 -#endif diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S deleted file mode 100644 index 3bf6685123cb..000000000000 --- a/arch/arm/mach-s3c/pm-h1940.S +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org> - * - * H1940 Suspend to RAM - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include "map.h" - -#include "regs-gpio.h" - - .text - .global h1940_pm_return - -h1940_pm_return: - mov r0, #S3C2410_PA_GPIO - ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO] diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c deleted file mode 100644 index a66419883735..000000000000 --- a/arch/arm/mach-s3c/pm-s3c2410.c +++ /dev/null @@ -1,170 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support - -#include <linux/init.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/time.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <asm/mach-types.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" - -#include "gpio-cfg.h" -#include "cpu.h" -#include "pm.h" - -#include "h1940.h" - -static void s3c2410_pm_prepare(void) -{ - /* ensure at least GSTATUS3 has the resume address */ - - __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3); - - S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - - if (machine_is_h1940()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x400) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - /* RX3715 and RX1950 use similar to H1940 code and the - * same offsets for resume and checksum pointers */ - - if (machine_is_rx3715() || machine_is_rx1950()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x4) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - if (machine_is_aml_m5900()) { - gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); - gpio_free(S3C2410_GPF(2)); - } - - if (machine_is_rx1950()) { - /* According to S3C2442 user's manual, page 7-17, - * when the system is operating in NAND boot mode, - * the hardware pin configuration - EINT[23:21] – - * must be set as input for starting up after - * wakeup from sleep mode - */ - s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT); - } -} - -static void s3c2410_pm_resume(void) -{ - unsigned long tmp; - - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - - if (machine_is_aml_m5900()) { - gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); - gpio_free(S3C2410_GPF(2)); - } -} - -struct syscore_ops s3c2410_pm_syscore_ops = { - .resume = s3c2410_pm_resume, -}; - -static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s3c2410_pm_prepare; - pm_cpu_sleep = s3c2410_cpu_suspend; - - return 0; -} - -#if defined(CONFIG_CPU_S3C2410) -static struct subsys_interface s3c2410_pm_interface = { - .name = "s3c2410_pm", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_pm_add, -}; - -/* register ourselves */ - -static int __init s3c2410_pm_drvinit(void) -{ - return subsys_interface_register(&s3c2410_pm_interface); -} - -arch_initcall(s3c2410_pm_drvinit); - -static struct subsys_interface s3c2410a_pm_interface = { - .name = "s3c2410a_pm", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410_pm_add, -}; - -static int __init s3c2410a_pm_drvinit(void) -{ - return subsys_interface_register(&s3c2410a_pm_interface); -} - -arch_initcall(s3c2410a_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2440) -static struct subsys_interface s3c2440_pm_interface = { - .name = "s3c2440_pm", - .subsys = &s3c2440_subsys, - .add_dev = s3c2410_pm_add, -}; - -static int __init s3c2440_pm_drvinit(void) -{ - return subsys_interface_register(&s3c2440_pm_interface); -} - -arch_initcall(s3c2440_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2442) -static struct subsys_interface s3c2442_pm_interface = { - .name = "s3c2442_pm", - .subsys = &s3c2442_subsys, - .add_dev = s3c2410_pm_add, -}; - -static int __init s3c2442_pm_drvinit(void) -{ - return subsys_interface_register(&s3c2442_pm_interface); -} - -arch_initcall(s3c2442_pm_drvinit); -#endif diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c deleted file mode 100644 index ed3b4cfc7c0f..000000000000 --- a/arch/arm/mach-s3c/pm-s3c2412.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://armlinux.simtec.co.uk/. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> -#include <asm/irq.h> - -#include "irqs.h" -#include "regs-gpio.h" - -#include "cpu.h" -#include "pm.h" -#include "wakeup-mask.h" - -#include "regs-dsc-s3c24xx.h" -#include "s3c2412-power.h" - -extern void s3c2412_sleep_enter(void); - -static int s3c2412_cpu_suspend(unsigned long arg) -{ - unsigned long tmp; - - /* set our standby method to sleep */ - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; - __raw_writel(tmp, S3C2412_PWRCFG); - - s3c2412_sleep_enter(); - - pr_info("Failed to suspend the system\n"); - return 1; /* Aborting suspend */ -} - -/* mapping of interrupts to parts of the wakeup mask */ -static const struct samsung_wakeup_mask wake_irqs[] = { - { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, -}; - -static void s3c2412_pm_prepare(void) -{ - samsung_sync_wakemask(S3C2412_PWRCFG, - wake_irqs, ARRAY_SIZE(wake_irqs)); -} - -static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s3c2412_pm_prepare; - pm_cpu_sleep = s3c2412_cpu_suspend; - - return 0; -} - -static struct sleep_save s3c2412_sleep[] = { - SAVE_ITEM(S3C2412_DSC0), - SAVE_ITEM(S3C2412_DSC1), - SAVE_ITEM(S3C2413_GPJDAT), - SAVE_ITEM(S3C2413_GPJCON), - SAVE_ITEM(S3C2413_GPJUP), - - /* save the PWRCFG to get back to original sleep method */ - - SAVE_ITEM(S3C2412_PWRCFG), - - /* save the sleep configuration anyway, just in case these - * get damaged during wakeup */ - - SAVE_ITEM(S3C2412_GPBSLPCON), - SAVE_ITEM(S3C2412_GPCSLPCON), - SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPFSLPCON), - SAVE_ITEM(S3C2412_GPGSLPCON), - SAVE_ITEM(S3C2412_GPHSLPCON), - SAVE_ITEM(S3C2413_GPJSLPCON), -}; - -static struct subsys_interface s3c2412_pm_interface = { - .name = "s3c2412_pm", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_pm_add, -}; - -static __init int s3c2412_pm_init(void) -{ - return subsys_interface_register(&s3c2412_pm_interface); -} - -arch_initcall(s3c2412_pm_init); - -static int s3c2412_pm_suspend(void) -{ - s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static void s3c2412_pm_resume(void) -{ - unsigned long tmp; - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; - tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; - __raw_writel(tmp, S3C2412_PWRCFG); - - s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); -} - -struct syscore_ops s3c2412_pm_syscore_ops = { - .suspend = s3c2412_pm_suspend, - .resume = s3c2412_pm_resume, -}; diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c deleted file mode 100644 index f69ad84cf4ff..000000000000 --- a/arch/arm/mach-s3c/pm-s3c2416.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2010 Samsung Electronics Co., Ltd. -// http://www.samsung.com -// -// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support) - -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> - -#include "regs-s3c2443-clock.h" - -#include "cpu.h" -#include "pm.h" - -#include "s3c2412-power.h" - -#ifdef CONFIG_PM_SLEEP -extern void s3c2412_sleep_enter(void); - -static int s3c2416_cpu_suspend(unsigned long arg) -{ - /* enable wakeup sources regardless of battery state */ - __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); - - /* set the mode as sleep, 2BED represents "Go to BED" */ - __raw_writel(0x2BED, S3C2443_PWRMODE); - - s3c2412_sleep_enter(); - - pr_info("Failed to suspend the system\n"); - return 1; /* Aborting suspend */ -} - -static void s3c2416_pm_prepare(void) -{ - /* - * write the magic value u-boot uses to check for resume into - * the INFORM0 register, and ensure INFORM1 is set to the - * correct address to resume from. - */ - __raw_writel(0x2BED, S3C2412_INFORM0); - __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1); -} - -static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s3c2416_pm_prepare; - pm_cpu_sleep = s3c2416_cpu_suspend; - - return 0; -} - -static struct subsys_interface s3c2416_pm_interface = { - .name = "s3c2416_pm", - .subsys = &s3c2416_subsys, - .add_dev = s3c2416_pm_add, -}; - -static __init int s3c2416_pm_init(void) -{ - return subsys_interface_register(&s3c2416_pm_interface); -} - -arch_initcall(s3c2416_pm_init); -#endif - -static void s3c2416_pm_resume(void) -{ - /* unset the return-from-sleep amd inform flags */ - __raw_writel(0x0, S3C2443_PWRMODE); - __raw_writel(0x0, S3C2412_INFORM0); - __raw_writel(0x0, S3C2412_INFORM1); -} - -struct syscore_ops s3c2416_pm_syscore_ops = { - .resume = s3c2416_pm_resume, -}; diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c deleted file mode 100644 index 3a8f5c38882e..000000000000 --- a/arch/arm/mach-s3c/pm-s3c24xx.c +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2004-2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// S3C24XX Power Manager (Suspend-To-RAM) support -// -// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information -// -// Parts based on arch/arm/mach-pxa/pm.c -// -// Thanks to Dimitry Andric for debugging - -#include <linux/init.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/time.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include "regs-clock.h" -#include "regs-gpio.h" -#include "regs-irq.h" -#include "gpio-samsung.h" - -#include <asm/mach/time.h> - -#include "gpio-cfg.h" -#include "pm.h" - -#include "regs-mem-s3c24xx.h" - -#define PFX "s3c24xx-pm: " - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save core_save[] = { - /* we restore the timings here, with the proviso that the board - * brings the system up in an slower, or equal frequency setting - * to the original system. - * - * if we cannot guarantee this, then things are going to go very - * wrong here, as we modify the refresh and both pll settings. - */ - - SAVE_ITEM(S3C2410_BWSCON), - SAVE_ITEM(S3C2410_BANKCON0), - SAVE_ITEM(S3C2410_BANKCON1), - SAVE_ITEM(S3C2410_BANKCON2), - SAVE_ITEM(S3C2410_BANKCON3), - SAVE_ITEM(S3C2410_BANKCON4), - SAVE_ITEM(S3C2410_BANKCON5), -}; -#endif - -/* s3c_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - unsigned long irqstate; - unsigned long pinstate; - int irq = gpio_to_irq(pin); - - if (irqoffs < 4) - irqstate = s3c_irqwake_intmask & (1L<<irqoffs); - else - irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - - pinstate = s3c_gpio_getcfg(pin); - - if (!irqstate) { - if (pinstate == S3C2410_GPIO_IRQ) - S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin); - } else { - if (pinstate == S3C2410_GPIO_IRQ) { - S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); - } - } -} - -/* s3c_pm_configure_extint - * - * configure all external interrupt pins -*/ - -void s3c_pm_configure_extint(void) -{ - int pin; - - /* for each of the external interrupts (EINT0..EINT15) we - * need to check whether it is an external interrupt source, - * and then configure it as an input if it is not - */ - - for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) { - s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0)); - } - - for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) { - s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8); - } -} - -#ifdef CONFIG_PM_SLEEP -void s3c_pm_restore_core(void) -{ - s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); -} - -void s3c_pm_save_core(void) -{ - s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); -} -#endif diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h deleted file mode 100644 index 933ddb5eedec..000000000000 --- a/arch/arm/mach-s3c/regs-clock-s3c24xx.h +++ /dev/null @@ -1,146 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 clock register definitions - */ - -#ifndef __ASM_ARM_REGS_CLOCK -#define __ASM_ARM_REGS_CLOCK - -#include "map.h" - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) - -#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) -#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) -#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) -#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - -#define S3C2410_CLKCON_IDLE (1<<2) -#define S3C2410_CLKCON_POWER (1<<3) -#define S3C2410_CLKCON_NAND (1<<4) -#define S3C2410_CLKCON_LCDC (1<<5) -#define S3C2410_CLKCON_USBH (1<<6) -#define S3C2410_CLKCON_USBD (1<<7) -#define S3C2410_CLKCON_PWMT (1<<8) -#define S3C2410_CLKCON_SDI (1<<9) -#define S3C2410_CLKCON_UART0 (1<<10) -#define S3C2410_CLKCON_UART1 (1<<11) -#define S3C2410_CLKCON_UART2 (1<<12) -#define S3C2410_CLKCON_GPIO (1<<13) -#define S3C2410_CLKCON_RTC (1<<14) -#define S3C2410_CLKCON_ADC (1<<15) -#define S3C2410_CLKCON_IIC (1<<16) -#define S3C2410_CLKCON_IIS (1<<17) -#define S3C2410_CLKCON_SPI (1<<18) - -#define S3C2410_CLKDIVN_PDIVN (1<<0) -#define S3C2410_CLKDIVN_HDIVN (1<<1) - -#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -#define S3C2410_CLKSLOW_SLOW (1<<4) -#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -/* extra registers */ -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - -#define S3C2440_CLKCON_CAMERA (1<<19) -#define S3C2440_CLKCON_AC97 (1<<20) - -#define S3C2440_CLKDIVN_PDIVN (1<<0) -#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) -#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) -#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) -#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) -#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) -#define S3C2440_CLKDIVN_UCLK (1<<3) - -#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) -#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) -#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) -#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) -#define S3C2440_CAMDIVN_DVSEN (1<<12) - -#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) - -#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ - -#if defined(CONFIG_CPU_S3C2412) - -#define S3C2412_OSCSET S3C2410_CLKREG(0x18) -#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) - -#define S3C2412_PLLCON_OFF (1<<20) - -#define S3C2412_CLKDIVN_PDIVN (1<<2) -#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2412_CLKDIVN_ARMDIVN (1<<3) -#define S3C2412_CLKDIVN_DVSEN (1<<4) -#define S3C2412_CLKDIVN_HALFHCLK (1<<5) -#define S3C2412_CLKDIVN_USB48DIV (1<<6) -#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) -#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) -#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) -#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) -#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) -#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) - -#define S3C2412_CLKCON_WDT (1<<28) -#define S3C2412_CLKCON_SPI (1<<27) -#define S3C2412_CLKCON_IIS (1<<26) -#define S3C2412_CLKCON_IIC (1<<25) -#define S3C2412_CLKCON_ADC (1<<24) -#define S3C2412_CLKCON_RTC (1<<23) -#define S3C2412_CLKCON_GPIO (1<<22) -#define S3C2412_CLKCON_UART2 (1<<21) -#define S3C2412_CLKCON_UART1 (1<<20) -#define S3C2412_CLKCON_UART0 (1<<19) -#define S3C2412_CLKCON_SDI (1<<18) -#define S3C2412_CLKCON_PWMT (1<<17) -#define S3C2412_CLKCON_USBD (1<<16) -#define S3C2412_CLKCON_CAMCLK (1<<15) -#define S3C2412_CLKCON_UARTCLK (1<<14) -/* missing 13 */ -#define S3C2412_CLKCON_USB_HOST48 (1<<12) -#define S3C2412_CLKCON_USB_DEV48 (1<<11) -#define S3C2412_CLKCON_HCLKdiv2 (1<<10) -#define S3C2412_CLKCON_HCLKx2 (1<<9) -#define S3C2412_CLKCON_SDRAM (1<<8) -/* missing 7 */ -#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH -#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC -#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND -#define S3C2412_CLKCON_DMA3 (1<<3) -#define S3C2412_CLKCON_DMA2 (1<<2) -#define S3C2412_CLKCON_DMA1 (1<<1) -#define S3C2412_CLKCON_DMA0 (1<<0) - -/* clock sourec controls */ - -#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) -#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) -#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) -#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) -#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) -#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) -#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) -#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) -#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) -#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) - -#endif /* CONFIG_CPU_S3C2412 */ - -#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28) - -#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h deleted file mode 100644 index 8b8b572aef04..000000000000 --- a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * S3C2440/S3C2412 Signal Drive Strength Control - */ - - -#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H -#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__ - -/* S3C2412 */ -#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) -#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) - -/* S3C2440 */ -#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) -#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) - -#endif /* __ASM_ARCH_REGS_DSC_S3C24XX_H */ - diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h deleted file mode 100644 index 9a7e262268a7..000000000000 --- a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h +++ /dev/null @@ -1,608 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * S3C2410 GPIO register definitions - */ - - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H - -#include "map-s3c.h" - -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) - -/* general configuration options */ - -#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ -#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) -#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ -#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ - -/* register address for the GPIO registers. - * S3C24XX_GPIOREG2 is for the second set of registers in the - * GPIO which move between s3c2410 and s3c2412 type systems */ - -#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) - - -/* configure GPIO ports A..G */ - -/* port A - S3C2410: 22bits, zero in bit X makes pin X output - * 1 makes port special function, this is default -*/ -#define S3C2410_GPACON S3C2410_GPIOREG(0x00) -#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2410_GPA0_ADDR0 (1<<0) -#define S3C2410_GPA1_ADDR16 (1<<1) -#define S3C2410_GPA2_ADDR17 (1<<2) -#define S3C2410_GPA3_ADDR18 (1<<3) -#define S3C2410_GPA4_ADDR19 (1<<4) -#define S3C2410_GPA5_ADDR20 (1<<5) -#define S3C2410_GPA6_ADDR21 (1<<6) -#define S3C2410_GPA7_ADDR22 (1<<7) -#define S3C2410_GPA8_ADDR23 (1<<8) -#define S3C2410_GPA9_ADDR24 (1<<9) -#define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2410_GPA17_CLE (1<<17) -#define S3C2410_GPA18_ALE (1<<18) -#define S3C2410_GPA19_nFWE (1<<19) -#define S3C2410_GPA20_nFRE (1<<20) -#define S3C2410_GPA21_nRSTOUT (1<<21) -#define S3C2410_GPA22_nFCE (1<<22) - -/* 0x08 and 0x0c are reserved on S3C2410 */ - -/* S3C2410: - * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=special function, 11=reserved - - * bit 0,1 = pin 0, 2,3= pin 1... - * - * CPBUP = pull up resistor control, 1=disabled, 0=enabled -*/ - -#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) -#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) -#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) - -/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ - -#define S3C2410_GPB0_TOUT0 (0x02 << 0) - -#define S3C2410_GPB1_TOUT1 (0x02 << 2) - -#define S3C2410_GPB2_TOUT2 (0x02 << 4) - -#define S3C2410_GPB3_TOUT3 (0x02 << 6) - -#define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2410_GPB4_MASK (0x03 << 8) - -#define S3C2410_GPB5_nXBACK (0x02 << 10) -#define S3C2443_GPB5_XBACK (0x03 << 10) - -#define S3C2410_GPB6_nXBREQ (0x02 << 12) -#define S3C2443_GPB6_XBREQ (0x03 << 12) - -#define S3C2410_GPB7_nXDACK1 (0x02 << 14) -#define S3C2443_GPB7_XDACK1 (0x03 << 14) - -#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) - -#define S3C2410_GPB9_nXDACK0 (0x02 << 18) -#define S3C2443_GPB9_XDACK0 (0x03 << 18) - -#define S3C2410_GPB10_nXDRE0 (0x02 << 20) -#define S3C2443_GPB10_XDREQ0 (0x03 << 20) - -#define S3C2410_GPB_PUPDIS(x) (1<<(x)) - -/* Port C consits of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's sync/etc. -*/ - -#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) -#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) -#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) -#define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2410_GPC_PUPDIS(x) (1<<(x)) - -/* - * S3C2410: Port D consists of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's data. - * - * almost identical setup to port c -*/ - -#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) -#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) -#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) - -#define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2442_GPD0_nSPICS1 (0x03 << 0) - -#define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2442_GPD1_SPICLK1 (0x03 << 2) - -#define S3C2410_GPD2_VD10 (0x02 << 4) - -#define S3C2410_GPD3_VD11 (0x02 << 6) - -#define S3C2410_GPD4_VD12 (0x02 << 8) - -#define S3C2410_GPD5_VD13 (0x02 << 10) - -#define S3C2410_GPD6_VD14 (0x02 << 12) - -#define S3C2410_GPD7_VD15 (0x02 << 14) - -#define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2440_GPD8_SPIMISO1 (0x03 << 16) - -#define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) - -#define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2440_GPD10_SPICLK1 (0x03 << 20) - -#define S3C2410_GPD11_VD19 (0x02 << 22) - -#define S3C2410_GPD12_VD20 (0x02 << 24) - -#define S3C2410_GPD13_VD21 (0x02 << 26) - -#define S3C2410_GPD14_VD22 (0x02 << 28) -#define S3C2410_GPD14_nSS1 (0x03 << 28) - -#define S3C2410_GPD15_VD23 (0x02 << 30) -#define S3C2410_GPD15_nSS0 (0x03 << 30) - -#define S3C2410_GPD_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port E consists of 16 GPIO/Special function - * - * again, the same as port B, but dealing with I2S, SDI, and - * more miscellaneous functions - * - * GPIO / interrupt inputs -*/ - -#define S3C2410_GPECON S3C2410_GPIOREG(0x40) -#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) -#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) - -#define S3C2410_GPE0_I2SLRCK (0x02 << 0) -#define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2410_GPE0_MASK (0x03 << 0) - -#define S3C2410_GPE1_I2SSCLK (0x02 << 2) -#define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2410_GPE1_MASK (0x03 << 2) - -#define S3C2410_GPE2_CDCLK (0x02 << 4) -#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) - -#define S3C2410_GPE3_I2SSDI (0x02 << 6) -#define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2410_GPE3_nSS0 (0x03 << 6) -#define S3C2410_GPE3_MASK (0x03 << 6) - -#define S3C2410_GPE4_I2SSDO (0x02 << 8) -#define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2410_GPE4_I2SSDI (0x03 << 8) -#define S3C2410_GPE4_MASK (0x03 << 8) - -#define S3C2410_GPE5_SDCLK (0x02 << 10) -#define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2443_GPE5_AC_BITCLK (0x03 << 10) - -#define S3C2410_GPE6_SDCMD (0x02 << 12) -#define S3C2443_GPE6_SD1_CMD (0x02 << 12) -#define S3C2443_GPE6_AC_SDI (0x03 << 12) - -#define S3C2410_GPE7_SDDAT0 (0x02 << 14) -#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) -#define S3C2443_GPE7_AC_SDO (0x03 << 14) - -#define S3C2410_GPE8_SDDAT1 (0x02 << 16) -#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) -#define S3C2443_GPE8_AC_SYNC (0x03 << 16) - -#define S3C2410_GPE9_SDDAT2 (0x02 << 18) -#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) -#define S3C2443_GPE9_AC_nRESET (0x03 << 18) - -#define S3C2410_GPE10_SDDAT3 (0x02 << 20) -#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) - -#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) - -#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) - -#define S3C2410_GPE13_SPICLK0 (0x02 << 26) - -#define S3C2410_GPE14_IICSCL (0x02 << 28) -#define S3C2410_GPE14_MASK (0x03 << 28) - -#define S3C2410_GPE15_IICSDA (0x02 << 30) -#define S3C2410_GPE15_MASK (0x03 << 30) - -#define S3C2440_GPE0_ACSYNC (0x03 << 0) -#define S3C2440_GPE1_ACBITCLK (0x03 << 2) -#define S3C2440_GPE2_ACRESET (0x03 << 4) -#define S3C2440_GPE3_ACIN (0x03 << 6) -#define S3C2440_GPE4_ACOUT (0x03 << 8) - -#define S3C2410_GPE_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port F consists of 8 GPIO/Special function - * - * GPIO / interrupt inputs - * - * GPFCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined - * - * pull up works like all other ports. - * - * GPIO/serial/misc pins -*/ - -#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) -#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) -#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) - -#define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2410_GPF7_EINT7 (0x02 << 14) -#define S3C2410_GPF_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port G consists of 8 GPIO/IRQ/Special function - * - * GPGCON has 2 bits for each of the input pins on port G - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) -#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) -#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) - -#define S3C2410_GPG0_EINT8 (0x02 << 0) - -#define S3C2410_GPG1_EINT9 (0x02 << 2) - -#define S3C2410_GPG2_EINT10 (0x02 << 4) -#define S3C2410_GPG2_nSS0 (0x03 << 4) - -#define S3C2410_GPG3_EINT11 (0x02 << 6) -#define S3C2410_GPG3_nSS1 (0x03 << 6) - -#define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2410_GPG4_LCDPWREN (0x03 << 8) -#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) - -#define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ - -#define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) - -#define S3C2410_GPG7_EINT15 (0x02 << 14) -#define S3C2410_GPG7_SPICLK1 (0x03 << 14) - -#define S3C2410_GPG8_EINT16 (0x02 << 16) - -#define S3C2410_GPG9_EINT17 (0x02 << 18) - -#define S3C2410_GPG10_EINT18 (0x02 << 20) - -#define S3C2410_GPG11_EINT19 (0x02 << 22) -#define S3C2410_GPG11_TCLK1 (0x03 << 22) -#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) - -#define S3C2410_GPG12_EINT20 (0x02 << 24) -#define S3C2410_GPG12_XMON (0x03 << 24) -#define S3C2442_GPG12_nSPICS0 (0x03 << 24) -#define S3C2443_GPG12_nINPACK (0x03 << 24) - -#define S3C2410_GPG13_EINT21 (0x02 << 26) -#define S3C2410_GPG13_nXPON (0x03 << 26) -#define S3C2443_GPG13_CF_nREG (0x03 << 26) - -#define S3C2410_GPG14_EINT22 (0x02 << 28) -#define S3C2410_GPG14_YMON (0x03 << 28) -#define S3C2443_GPG14_CF_RESET (0x03 << 28) - -#define S3C2410_GPG15_EINT23 (0x02 << 30) -#define S3C2410_GPG15_nYPON (0x03 << 30) -#define S3C2443_GPG15_CF_PWR (0x03 << 30) - -#define S3C2410_GPG_PUPDIS(x) (1<<(x)) - -/* Port H consists of11 GPIO/serial/Misc pins - * - * GPHCON has 2 bits for each of the input pins on port H - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) -#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) -#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) - -#define S3C2410_GPH0_nCTS0 (0x02 << 0) -#define S3C2416_GPH0_TXD0 (0x02 << 0) - -#define S3C2410_GPH1_nRTS0 (0x02 << 2) -#define S3C2416_GPH1_RXD0 (0x02 << 2) - -#define S3C2410_GPH2_TXD0 (0x02 << 4) -#define S3C2416_GPH2_TXD1 (0x02 << 4) - -#define S3C2410_GPH3_RXD0 (0x02 << 6) -#define S3C2416_GPH3_RXD1 (0x02 << 6) - -#define S3C2410_GPH4_TXD1 (0x02 << 8) -#define S3C2416_GPH4_TXD2 (0x02 << 8) - -#define S3C2410_GPH5_RXD1 (0x02 << 10) -#define S3C2416_GPH5_RXD2 (0x02 << 10) - -#define S3C2410_GPH6_TXD2 (0x02 << 12) -#define S3C2416_GPH6_TXD3 (0x02 << 12) -#define S3C2410_GPH6_nRTS1 (0x03 << 12) -#define S3C2416_GPH6_nRTS2 (0x03 << 12) - -#define S3C2410_GPH7_RXD2 (0x02 << 14) -#define S3C2416_GPH7_RXD3 (0x02 << 14) -#define S3C2410_GPH7_nCTS1 (0x03 << 14) -#define S3C2416_GPH7_nCTS2 (0x03 << 14) - -#define S3C2410_GPH8_UCLK (0x02 << 16) -#define S3C2416_GPH8_nCTS0 (0x02 << 16) - -#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) -#define S3C2442_GPH9_nSPICS0 (0x03 << 18) -#define S3C2416_GPH9_nRTS0 (0x02 << 18) - -#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) -#define S3C2416_GPH10_nCTS1 (0x02 << 20) - -#define S3C2416_GPH11_nRTS1 (0x02 << 22) - -#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24) - -#define S3C2416_GPH13_CLKOUT0 (0x02 << 26) - -#define S3C2416_GPH14_CLKOUT1 (0x02 << 28) - -/* The S3C2412 and S3C2413 move the GPJ register set to after - * GPH, which means all registers after 0x80 are now offset by 0x10 - * for the 2412/2413 from the 2410/2440/2442 -*/ - -/* - * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits - * for each of the pins on port J. - * 00 - input, 01 output, 10 - camera - * - * Pull up works like all other ports. - */ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -/* S3C2443 and above */ -#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8) - -#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0) -#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4) -#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8) - -#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0) -#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4) -#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8) - -#define S3C2443_GPMCON S3C2410_GPIOREG(0x100) -#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104) -#define S3C2443_GPMUP S3C2410_GPIOREG(0x108) - -/* miscellaneous control */ -#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) - -/* see clock.h for dclk definitions */ - -/* pullup control on databus */ -#define S3C2410_MISCCR_SPUCR_HEN (0<<0) -#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) -#define S3C2410_MISCCR_SPUCR_LEN (0<<1) -#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) - -#define S3C2410_MISCCR_USBDEV (0<<3) -#define S3C2410_MISCCR_USBHOST (1<<3) - -#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -#define S3C2410_MISCCR_CLK0_MASK (7<<4) - -#define S3C2412_MISCCR_CLK0_RTC (2<<4) - -#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -#define S3C2410_MISCCR_CLK1_MASK (7<<8) - -#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) - -#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -#define S3C2416_MISCCR_SEL_SUSPND (1<<12) -#define S3C2410_MISCCR_USBSUSPND1 (1<<13) - -#define S3C2410_MISCCR_nRSTCON (1<<16) - -#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ -#define S3C2410_MISCCR_SDSLEEP (7<<17) - -#define S3C2416_MISCCR_FLT_I2C (1<<24) -#define S3C2416_MISCCR_HSSPI_EN2 (1<<31) - -/* external interrupt control... */ -/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 - * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 - * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 - * - * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 - * - * Samsung datasheet p9-25 -*/ -#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) -#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) -#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) - -#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) -#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) -#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) - -/* interrupt filtering control for EINT16..EINT23 */ -#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) -#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) -#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) -#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) - -#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) -#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) -#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) -#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) - -/* values for interrupt filtering */ -#define S3C2410_EINTFLT_PCLK (0x00) -#define S3C2410_EINTFLT_EXTCLK (1<<7) -#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) - -/* removed EINTxxxx defs from here, not meant for this */ - -/* GSTATUS have miscellaneous information in them - * - * These move between s3c2410 and s3c2412 style systems. - */ - -#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) -#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) -#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) -#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) -#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) - -#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) -#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) -#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) -#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) -#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) - -#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) -#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) -#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) -#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) -#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) - -#define S3C2410_GSTATUS0_nWAIT (1<<3) -#define S3C2410_GSTATUS0_NCON (1<<2) -#define S3C2410_GSTATUS0_RnB (1<<1) -#define S3C2410_GSTATUS0_nBATTFLT (1<<0) - -#define S3C2410_GSTATUS1_IDMASK (0xffff0000) -#define S3C2410_GSTATUS1_2410 (0x32410000) -#define S3C2410_GSTATUS1_2412 (0x32412001) -#define S3C2410_GSTATUS1_2416 (0x32416003) -#define S3C2410_GSTATUS1_2440 (0x32440000) -#define S3C2410_GSTATUS1_2442 (0x32440aaa) -/* some 2416 CPUs report this value also */ -#define S3C2410_GSTATUS1_2450 (0x32450003) - -#define S3C2410_GSTATUS2_WTRESET (1<<2) -#define S3C2410_GSTATUS2_OFFRESET (1<<1) -#define S3C2410_GSTATUS2_PONRESET (1<<0) - -/* 2412/2413 sleep configuration registers */ - -#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) -#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) -#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) -#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) -#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) -#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) - -/* definitions for each pin bit */ -#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) -#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) -#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) -#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) - -#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) -#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) -#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) -#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2)) -#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */ -#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) - -#define S3C2412_SLPCON_ALL_LOW (0x0) -#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444) -#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888) -#define S3C2412_SLPCON_ALL_PULL (0x33333333) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ - diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h deleted file mode 100644 index c0b97b203415..000000000000 --- a/arch/arm/mach-s3c/regs-irq-s3c24xx.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - */ - - -#ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H - -#include "map-s3c.h" - -/* interrupt controller */ - -#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) -#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) - -#define S3C2410_SRCPND S3C2410_IRQREG(0x000) -#define S3C2410_INTMOD S3C2410_IRQREG(0x004) -#define S3C2410_INTMSK S3C2410_IRQREG(0x008) -#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) -#define S3C2410_INTPND S3C2410_IRQREG(0x010) -#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) -#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) -#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) - -#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030) -#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034) -#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040) -#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044) -#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048) -#define S3C2416_INTPND2 S3C2410_IRQREG(0x050) -#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054) -#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070) -#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074) - -/* mask: 0=enable, 1=disable - * 1 bit EINT, 4=EINT4, 23=EINT23 - * EINT0,1,2,3 are not handled here. -*/ - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) -#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) -#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) - -#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h deleted file mode 100644 index 8fed34a1672a..000000000000 --- a/arch/arm/mach-s3c/regs-mem-s3c24xx.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * S3C2410 Memory Control register definitions - */ - -#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H -#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__ - -#include "map-s3c.h" - -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) - -#define S3C2410_BWSCON S3C2410_MEMREG(0x00) -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20) -#define S3C2410_REFRESH S3C2410_MEMREG(0x24) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28) - -#define S3C2410_BWSCON_ST1 (1 << 7) -#define S3C2410_BWSCON_ST2 (1 << 11) -#define S3C2410_BWSCON_ST3 (1 << 15) -#define S3C2410_BWSCON_ST4 (1 << 19) -#define S3C2410_BWSCON_ST5 (1 << 23) - -#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) - -#define S3C2410_BWSCON_WS (1 << 2) - -#define S3C2410_BANKCON_PMC16 (0x3) - -#define S3C2410_BANKCON_Tacp_SHIFT (2) -#define S3C2410_BANKCON_Tcah_SHIFT (4) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) -#define S3C2410_BANKCON_Tacc_SHIFT (8) -#define S3C2410_BANKCON_Tcos_SHIFT (11) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -#define S3C2410_REFRESH_SELF (1 << 22) - -#define S3C2410_BANKSIZE_MASK (0x7 << 0) - -#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */ diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h deleted file mode 100644 index b3b670d463db..000000000000 --- a/arch/arm/mach-s3c/regs-s3c2443-clock.h +++ /dev/null @@ -1,238 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2443 clock register definitions - */ - -#ifndef __ASM_ARM_REGS_S3C2443_CLOCK -#define __ASM_ARM_REGS_S3C2443_CLOCK - -#include <linux/delay.h> -#include "map-s3c.h" - -#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2443_PLLCON_MDIVSHIFT 16 -#define S3C2443_PLLCON_PDIVSHIFT 8 -#define S3C2443_PLLCON_SDIVSHIFT 0 -#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) -#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) -#define S3C2443_PLLCON_SDIVMASK (3) - -#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) -#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) -#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) -#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) -#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) -#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) -#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) -#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) -#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) -#define S3C2443_SWRST S3C2443_CLKREG(0x44) -#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) -#define S3C2443_SYSID S3C2443_CLKREG(0x5C) -#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) -#define S3C2443_RSTCON S3C2443_CLKREG(0x64) -#define S3C2443_PHYCTRL S3C2443_CLKREG(0x80) -#define S3C2443_PHYPWR S3C2443_CLKREG(0x84) -#define S3C2443_URSTCON S3C2443_CLKREG(0x88) -#define S3C2443_UCLKCON S3C2443_CLKREG(0x8C) - -#define S3C2443_PLLCON_OFF (1<<24) - -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7) - -#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) - -#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) -#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) - -#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) - -#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) -#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) - -#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) -#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) - -#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9) -#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) -#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) -#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) -#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) -#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) -#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) -#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) -#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) -#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) -#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) - -/* S3C2443_CLKDIV1 removed, only used in clock.c code */ - -#define S3C2443_CLKCON_NAND - -#define S3C2443_HCLKCON_DMA0 (1<<0) -#define S3C2443_HCLKCON_DMA1 (1<<1) -#define S3C2443_HCLKCON_DMA2 (1<<2) -#define S3C2443_HCLKCON_DMA3 (1<<3) -#define S3C2443_HCLKCON_DMA4 (1<<4) -#define S3C2443_HCLKCON_DMA5 (1<<5) -#define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_LCDC (1<<9) -#define S3C2443_HCLKCON_USBH (1<<11) -#define S3C2443_HCLKCON_USBD (1<<12) -#define S3C2416_HCLKCON_HSMMC0 (1<<15) -#define S3C2443_HCLKCON_HSMMC (1<<16) -#define S3C2443_HCLKCON_CFC (1<<17) -#define S3C2443_HCLKCON_SSMC (1<<18) -#define S3C2443_HCLKCON_DRAMC (1<<19) - -#define S3C2443_PCLKCON_UART0 (1<<0) -#define S3C2443_PCLKCON_UART1 (1<<1) -#define S3C2443_PCLKCON_UART2 (1<<2) -#define S3C2443_PCLKCON_UART3 (1<<3) -#define S3C2443_PCLKCON_IIC (1<<4) -#define S3C2443_PCLKCON_SDI (1<<5) -#define S3C2443_PCLKCON_HSSPI (1<<6) -#define S3C2443_PCLKCON_ADC (1<<7) -#define S3C2443_PCLKCON_AC97 (1<<8) -#define S3C2443_PCLKCON_IIS (1<<9) -#define S3C2443_PCLKCON_PWMT (1<<10) -#define S3C2443_PCLKCON_WDT (1<<11) -#define S3C2443_PCLKCON_RTC (1<<12) -#define S3C2443_PCLKCON_GPIO (1<<13) -#define S3C2443_PCLKCON_SPI0 (1<<14) -#define S3C2443_PCLKCON_SPI1 (1<<15) - -#define S3C2443_SCLKCON_DDRCLK (1<<16) -#define S3C2443_SCLKCON_SSMCCLK (1<<15) -#define S3C2443_SCLKCON_HSSPICLK (1<<14) -#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) -#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) -#define S3C2443_SCLKCON_CAMCLK (1<<11) -#define S3C2443_SCLKCON_DISPCLK (1<<10) -#define S3C2443_SCLKCON_I2SCLK (1<<9) -#define S3C2443_SCLKCON_UARTCLK (1<<8) -#define S3C2443_SCLKCON_USBHOST (1<<1) - -#define S3C2443_PWRCFG_SLEEP (1<<15) - -#define S3C2443_PWRCFG_USBPHY (1 << 4) - -#define S3C2443_URSTCON_FUNCRST (1 << 2) -#define S3C2443_URSTCON_PHYRST (1 << 0) - -#define S3C2443_PHYCTRL_CLKSEL (1 << 3) -#define S3C2443_PHYCTRL_EXTCLK (1 << 2) -#define S3C2443_PHYCTRL_PLLSEL (1 << 1) -#define S3C2443_PHYCTRL_DSPORT (1 << 0) - -#define S3C2443_PHYPWR_COMMON_ON (1 << 31) -#define S3C2443_PHYPWR_ANALOG_PD (1 << 4) -#define S3C2443_PHYPWR_PLL_REFCLK (1 << 3) -#define S3C2443_PHYPWR_XO_ON (1 << 2) -#define S3C2443_PHYPWR_PLL_PWRDN (1 << 1) -#define S3C2443_PHYPWR_FSUSPEND (1 << 0) - -#define S3C2443_UCLKCON_DETECT_VBUS (1 << 31) -#define S3C2443_UCLKCON_FUNC_CLKEN (1 << 2) -#define S3C2443_UCLKCON_TCLKEN (1 << 0) - -#include <asm/div64.h> - -static inline unsigned int -s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); - do_div(fvco, pdiv << sdiv); - - return (unsigned int)fvco; -} - -static inline unsigned int -s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -static inline void s3c_hsudc_init_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - cfg = readl(S3C2443_URSTCON); - cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - mdelay(1); - - cfg = readl(S3C2443_URSTCON); - cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - - cfg = readl(S3C2443_PHYCTRL); - cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); - cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); - writel(cfg, S3C2443_PHYCTRL); - - cfg = readl(S3C2443_PHYPWR); - cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | - S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | - S3C2443_PHYPWR_ANALOG_PD); - cfg |= S3C2443_PHYPWR_COMMON_ON; - writel(cfg, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON); - cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | - S3C2443_UCLKCON_TCLKEN); - writel(cfg, S3C2443_UCLKCON); -} - -static inline void s3c_hsudc_uninit_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; - writel(cfg, S3C2443_UCLKCON); -} - -#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ - diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h deleted file mode 100644 index e7258b2423fc..000000000000 --- a/arch/arm/mach-s3c/rtc-core-s3c24xx.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> - * - * Samsung RTC Controller core functions - */ - -#ifndef __RTC_CORE_S3C24XX_H -#define __RTC_CORE_S3C24XX_H __FILE__ - -/* These functions are only for use with the core support code, such as - * the cpu specific initialisation code - */ - -extern struct platform_device s3c_device_rtc; - -/* re-define device name depending on support. */ -static inline void s3c_rtc_setname(char *name) -{ - s3c_device_rtc.name = name; -} - -#endif /* __RTC_CORE_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c deleted file mode 100644 index 4d39d9939c2f..000000000000 --- a/arch/arm/mach-s3c/s3c2410.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2003-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.simtec.co.uk/products/EB2410ITX/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" -#include "gpio-samsung.h" -#include <asm/irq.h> -#include <asm/system_misc.h> - - -#include "regs-clock.h" - -#include "cpu.h" -#include "devs.h" -#include "pm.h" - -#include "gpio-core.h" -#include "gpio-cfg.h" -#include "gpio-cfg-helpers.h" - -#include "s3c24xx.h" - -/* Initial IO mappings */ - -static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), -}; - -/* our uart devices */ - -/* uart registration process */ - -void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no); -} - -/* s3c2410_map_io - * - * register the standard cpu IO areas, and any passed in from the - * machine specific initialisation. -*/ - -void __init s3c2410_map_io(void) -{ - s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; - - iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); -} - -struct bus_type s3c2410_subsys = { - .name = "s3c2410-core", - .dev_name = "s3c2410-core", -}; - -/* Note, we would have liked to name this s3c2410-core, but we cannot - * register two subsystems with the same name. - */ -struct bus_type s3c2410a_subsys = { - .name = "s3c2410a-core", - .dev_name = "s3c2410a-core", -}; - -static struct device s3c2410_dev = { - .bus = &s3c2410_subsys, -}; - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2410 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -static int __init s3c2410_core_init(void) -{ - return subsys_system_register(&s3c2410_subsys, NULL); -} - -core_initcall(s3c2410_core_init); - -static int __init s3c2410a_core_init(void) -{ - return subsys_system_register(&s3c2410a_subsys, NULL); -} - -core_initcall(s3c2410a_core_init); - -int __init s3c2410_init(void) -{ - printk("S3C2410: Initialising architecture\n"); - -#ifdef CONFIG_PM_SLEEP - register_syscore_ops(&s3c2410_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); -#endif - - return device_register(&s3c2410_dev); -} - -int __init s3c2410a_init(void) -{ - s3c2410_dev.bus = &s3c2410a_subsys; - return s3c2410_init(); -} diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h deleted file mode 100644 index 0031cfaa1d76..000000000000 --- a/arch/arm/mach-s3c/s3c2412-power.h +++ /dev/null @@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - */ - -#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H -#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1 << 0) -#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0) -#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0) -#define S3C2412_PWRCFG_BATF_MASK (3 << 0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8) -#define S3C2412_PWRCFG_NAND_NORST (1 << 9) - -#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */ diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c deleted file mode 100644 index 0b1ca78c9d2a..000000000000 --- a/arch/arm/mach-s3c/s3c2412.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://armlinux.simtec.co.uk/. - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/reboot.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/system_misc.h> - -#include "map.h" -#include "regs-clock.h" -#include "regs-gpio.h" - -#include "cpu.h" -#include "devs.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "nand-core-s3c24xx.h" -#include "regs-dsc-s3c24xx.h" -#include "s3c2412-power.h" - -#ifndef CONFIG_CPU_S3C2412_ONLY -void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; - -static inline void s3c2412_init_gpio2(void) -{ - s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; -} -#else -#define s3c2412_init_gpio2() do { } while(0) -#endif - -/* Initial IO mappings */ - -static struct map_desc s3c2412_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), - { - .virtual = (unsigned long)S3C2412_VA_SSMC, - .pfn = __phys_to_pfn(S3C2412_PA_SSMC), - .length = SZ_1M, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)S3C2412_VA_EBI, - .pfn = __phys_to_pfn(S3C2412_PA_EBI), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -/* uart registration process */ - -void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no); - - /* rename devices that are s3c2412/s3c2413 specific */ - s3c_device_sdi.name = "s3c2412-sdi"; - s3c_device_lcd.name = "s3c2412-lcd"; - s3c_nand_setname("s3c2412-nand"); - - /* alter IRQ of SDI controller */ - - s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI; - s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI; - - /* spi channel related changes, s3c2412/13 specific */ - s3c_device_spi0.name = "s3c2412-spi"; - s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24; - s3c_device_spi1.name = "s3c2412-spi"; - s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1; - s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24; - -} - -/* s3c2412_idle - * - * use the standard idle call by ensuring the idle mode - * in power config, then issuing the idle co-processor - * instruction -*/ - -static void s3c2412_idle(void) -{ - unsigned long tmp; - - /* ensure our idle mode is to go to idle */ - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; - tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; - __raw_writel(tmp, S3C2412_PWRCFG); - - cpu_do_idle(); -} - -/* s3c2412_map_io - * - * register the standard cpu IO areas, and any passed in from the - * machine specific initialisation. -*/ - -void __init s3c2412_map_io(void) -{ - /* move base of IO */ - - s3c2412_init_gpio2(); - - /* set our idle function */ - - arm_pm_idle = s3c2412_idle; - - /* register our io-tables */ - - iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); -} - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2412 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -struct bus_type s3c2412_subsys = { - .name = "s3c2412-core", - .dev_name = "s3c2412-core", -}; - -static int __init s3c2412_core_init(void) -{ - return subsys_system_register(&s3c2412_subsys, NULL); -} - -core_initcall(s3c2412_core_init); - -static struct device s3c2412_dev = { - .bus = &s3c2412_subsys, -}; - -int __init s3c2412_init(void) -{ - printk("S3C2412: Initialising architecture\n"); - -#ifdef CONFIG_PM_SLEEP - register_syscore_ops(&s3c2412_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); -#endif - - return device_register(&s3c2412_dev); -} diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h deleted file mode 100644 index ed09a0e13bd8..000000000000 --- a/arch/arm/mach-s3c/s3c2412.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - */ - -#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H -#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__ - -#include "map-s3c.h" - -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) - -#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) -#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) - -#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4) - -#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0) - -#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */ diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c deleted file mode 100644 index 126e6ed29713..000000000000 --- a/arch/arm/mach-s3c/s3c2416.c +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, -// as part of OpenInkpot project -// Copyright (c) 2009 Promwad Innovation Company -// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> -// -// Samsung S3C2416 Mobile CPU support - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/reboot.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" -#include "gpio-samsung.h" -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/system_misc.h> - -#include "regs-s3c2443-clock.h" -#include "rtc-core-s3c24xx.h" - -#include "gpio-core.h" -#include "gpio-cfg.h" -#include "gpio-cfg-helpers.h" -#include "devs.h" -#include "cpu.h" -#include "sdhci.h" -#include "pm.h" - -#include "iic-core.h" -#include "adc-core.h" - -#include "s3c24xx.h" -#include "fb-core-s3c24xx.h" -#include "nand-core-s3c24xx.h" -#include "spi-core-s3c24xx.h" - -static struct map_desc s3c2416_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(WATCHDOG), - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), -}; - -struct bus_type s3c2416_subsys = { - .name = "s3c2416-core", - .dev_name = "s3c2416-core", -}; - -static struct device s3c2416_dev = { - .bus = &s3c2416_subsys, -}; - -int __init s3c2416_init(void) -{ - printk(KERN_INFO "S3C2416: Initializing architecture\n"); - - /* change WDT IRQ number */ - s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - - s3c_fb_setname("s3c2443-fb"); - - s3c_adc_setname("s3c2416-adc"); - s3c_rtc_setname("s3c2416-rtc"); - -#ifdef CONFIG_PM_SLEEP - register_syscore_ops(&s3c2416_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); - register_syscore_ops(&s3c2416_irq_syscore_ops); -#endif - - return device_register(&s3c2416_dev); -} - -void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); - - s3c_nand_setname("s3c2412-nand"); -} - -/* s3c2416_map_io - * - * register the standard cpu IO areas, and any passed in from the - * machine specific initialisation. - */ - -void __init s3c2416_map_io(void) -{ - s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown; - s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown; - - /* initialize device information early */ - s3c2416_default_sdhci0(); - s3c2416_default_sdhci1(); - s3c24xx_spi_setname("s3c2443-spi"); - - iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); -} - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2416 based system) - * as a driver which may support both 2443 and 2440 may try and use it. -*/ - -static int __init s3c2416_core_init(void) -{ - return subsys_system_register(&s3c2416_subsys, NULL); -} - -core_initcall(s3c2416_core_init); diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c deleted file mode 100644 index c6cdee4987e8..000000000000 --- a/arch/arm/mach-s3c/s3c2440.c +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2004-2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Samsung S3C2440 Mobile CPU support - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/irq.h> - -#include "devs.h" -#include "cpu.h" -#include "pm.h" - -#include "gpio-core.h" -#include "gpio-cfg.h" -#include "gpio-cfg-helpers.h" -#include "gpio-samsung.h" - -#include "s3c24xx.h" - -static struct device s3c2440_dev = { - .bus = &s3c2440_subsys, -}; - -int __init s3c2440_init(void) -{ - printk("S3C2440: Initialising architecture\n"); - - /* change irq for watchdog */ - - s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; - - /* register suspend/resume handlers */ - -#ifdef CONFIG_PM_SLEEP - register_syscore_ops(&s3c2410_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); - register_syscore_ops(&s3c244x_pm_syscore_ops); -#endif - - /* register our system device for everything else */ - - return device_register(&s3c2440_dev); -} - -void __init s3c2440_map_io(void) -{ - s3c244x_map_io(); - - s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; -} diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c deleted file mode 100644 index 0c0e30b6688f..000000000000 --- a/arch/arm/mach-s3c/s3c2442.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2004-2005 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// S3C2442 core and lock support - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <linux/atomic.h> -#include <asm/irq.h> - -#include "regs-clock.h" - -#include "cpu.h" -#include "pm.h" - -#include "gpio-core.h" -#include "gpio-cfg.h" -#include "gpio-cfg-helpers.h" -#include "gpio-samsung.h" - -#include "s3c24xx.h" - -static struct device s3c2442_dev = { - .bus = &s3c2442_subsys, -}; - -int __init s3c2442_init(void) -{ - printk("S3C2442: Initialising architecture\n"); - -#ifdef CONFIG_PM_SLEEP - register_syscore_ops(&s3c2410_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); - register_syscore_ops(&s3c244x_pm_syscore_ops); -#endif - - return device_register(&s3c2442_dev); -} - -void __init s3c2442_map_io(void) -{ - s3c244x_map_io(); - - s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; - s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; -} diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c deleted file mode 100644 index 05c3c298b9f8..000000000000 --- a/arch/arm/mach-s3c/s3c2443.c +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2007 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Samsung S3C2443 Mobile CPU support - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/reboot.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" -#include "gpio-samsung.h" -#include "irqs.h" -#include <asm/irq.h> -#include <asm/system_misc.h> - -#include "regs-s3c2443-clock.h" -#include "rtc-core-s3c24xx.h" - -#include "gpio-core.h" -#include "gpio-cfg.h" -#include "gpio-cfg-helpers.h" -#include "devs.h" -#include "cpu.h" -#include "adc-core.h" - -#include "s3c24xx.h" -#include "fb-core-s3c24xx.h" -#include "nand-core-s3c24xx.h" -#include "spi-core-s3c24xx.h" - -static struct map_desc s3c2443_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(WATCHDOG), - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), -}; - -struct bus_type s3c2443_subsys = { - .name = "s3c2443-core", - .dev_name = "s3c2443-core", -}; - -static struct device s3c2443_dev = { - .bus = &s3c2443_subsys, -}; - -int __init s3c2443_init(void) -{ - printk("S3C2443: Initialising architecture\n"); - - s3c_nand_setname("s3c2412-nand"); - s3c_fb_setname("s3c2443-fb"); - - s3c_adc_setname("s3c2443-adc"); - s3c_rtc_setname("s3c2443-rtc"); - - /* change WDT IRQ number */ - s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; - - return device_register(&s3c2443_dev); -} - -void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); -} - -/* s3c2443_map_io - * - * register the standard cpu IO areas, and any passed in from the - * machine specific initialisation. - */ - -void __init s3c2443_map_io(void) -{ - s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; - s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; - - /* initialize device information early */ - s3c24xx_spi_setname("s3c2443-spi"); - - iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); -} - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2443 based system) - * as a driver which may support both 2443 and 2440 may try and use it. -*/ - -static int __init s3c2443_core_init(void) -{ - return subsys_system_register(&s3c2443_subsys, NULL); -} - -core_initcall(s3c2443_core_init); diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c deleted file mode 100644 index 95df3491e650..000000000000 --- a/arch/arm/mach-s3c/s3c244x.c +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2004-2006 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/system_misc.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" -#include <asm/irq.h> - -#include "regs-clock.h" -#include "regs-gpio.h" - -#include "devs.h" -#include "cpu.h" -#include "pm.h" - -#include "s3c24xx.h" -#include "nand-core-s3c24xx.h" -#include "regs-dsc-s3c24xx.h" - -static struct map_desc s3c244x_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), -}; - -/* uart initialisation */ - -void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); -} - -void __init s3c244x_map_io(void) -{ - /* register our io-tables */ - - iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); - - /* rename any peripherals used differing from the s3c2410 */ - - s3c_device_sdi.name = "s3c2440-sdi"; - s3c_device_i2c0.name = "s3c2440-i2c"; - s3c_nand_setname("s3c2440-nand"); - s3c_device_ts.name = "s3c2440-ts"; - s3c_device_usbgadget.name = "s3c2440-usbgadget"; - s3c2410_device_dclk.name = "s3c2440-dclk"; -} - -/* Since the S3C2442 and S3C2440 share items, put both subsystems here */ - -struct bus_type s3c2440_subsys = { - .name = "s3c2440-core", - .dev_name = "s3c2440-core", -}; - -struct bus_type s3c2442_subsys = { - .name = "s3c2442-core", - .dev_name = "s3c2442-core", -}; - -/* need to register the subsystem before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -static int __init s3c2440_core_init(void) -{ - return subsys_system_register(&s3c2440_subsys, NULL); -} - -core_initcall(s3c2440_core_init); - -static int __init s3c2442_core_init(void) -{ - return subsys_system_register(&s3c2442_subsys, NULL); -} - -core_initcall(s3c2442_core_init); - - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save s3c244x_sleep[] = { - SAVE_ITEM(S3C2440_DSC0), - SAVE_ITEM(S3C2440_DSC1), - SAVE_ITEM(S3C2440_GPJDAT), - SAVE_ITEM(S3C2440_GPJCON), - SAVE_ITEM(S3C2440_GPJUP) -}; - -static int s3c244x_suspend(void) -{ - s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -static void s3c244x_resume(void) -{ - s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); -} - -struct syscore_ops s3c244x_pm_syscore_ops = { - .suspend = s3c244x_suspend, - .resume = s3c244x_resume, -}; -#endif diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c deleted file mode 100644 index 819a95364af9..000000000000 --- a/arch/arm/mach-s3c/s3c24xx.c +++ /dev/null @@ -1,687 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (c) 2004-2005 Simtec Electronics -// http://www.simtec.co.uk/products/SWLINUX/ -// Ben Dooks <ben@simtec.co.uk> -// -// Common code for S3C24XX machines - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/platform_data/clk-s3c2410.h> -#include <linux/platform_data/dma-s3c24xx.h> -#include <linux/dmaengine.h> -#include <linux/clk/samsung.h> - -#include "hardware-s3c24xx.h" -#include "map.h" -#include "regs-clock.h" -#include <asm/irq.h> -#include <asm/cacheflush.h> -#include <asm/system_info.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "regs-gpio.h" -#include "dma-s3c24xx.h" - -#include "cpu.h" -#include "devs.h" -#include "pwm-core.h" - -#include "s3c24xx.h" - -/* table of supported CPUs */ - -static const char name_s3c2410[] = "S3C2410"; -static const char name_s3c2412[] = "S3C2412"; -static const char name_s3c2416[] = "S3C2416/S3C2450"; -static const char name_s3c2440[] = "S3C2440"; -static const char name_s3c2442[] = "S3C2442"; -static const char name_s3c2442b[] = "S3C2442B"; -static const char name_s3c2443[] = "S3C2443"; -static const char name_s3c2410a[] = "S3C2410A"; -static const char name_s3c2440a[] = "S3C2440A"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = 0x32410000, - .idmask = 0xffffffff, - .map_io = s3c2410_map_io, - .init_uarts = s3c2410_init_uarts, - .init = s3c2410_init, - .name = name_s3c2410 - }, - { - .idcode = 0x32410002, - .idmask = 0xffffffff, - .map_io = s3c2410_map_io, - .init_uarts = s3c2410_init_uarts, - .init = s3c2410a_init, - .name = name_s3c2410a - }, - { - .idcode = 0x32440000, - .idmask = 0xffffffff, - .map_io = s3c2440_map_io, - .init_uarts = s3c244x_init_uarts, - .init = s3c2440_init, - .name = name_s3c2440 - }, - { - .idcode = 0x32440001, - .idmask = 0xffffffff, - .map_io = s3c2440_map_io, - .init_uarts = s3c244x_init_uarts, - .init = s3c2440_init, - .name = name_s3c2440a - }, - { - .idcode = 0x32440aaa, - .idmask = 0xffffffff, - .map_io = s3c2442_map_io, - .init_uarts = s3c244x_init_uarts, - .init = s3c2442_init, - .name = name_s3c2442 - }, - { - .idcode = 0x32440aab, - .idmask = 0xffffffff, - .map_io = s3c2442_map_io, - .init_uarts = s3c244x_init_uarts, - .init = s3c2442_init, - .name = name_s3c2442b - }, - { - .idcode = 0x32412001, - .idmask = 0xffffffff, - .map_io = s3c2412_map_io, - .init_uarts = s3c2412_init_uarts, - .init = s3c2412_init, - .name = name_s3c2412, - }, - { /* a newer version of the s3c2412 */ - .idcode = 0x32412003, - .idmask = 0xffffffff, - .map_io = s3c2412_map_io, - .init_uarts = s3c2412_init_uarts, - .init = s3c2412_init, - .name = name_s3c2412, - }, - { /* a strange version of the s3c2416 */ - .idcode = 0x32450003, - .idmask = 0xffffffff, - .map_io = s3c2416_map_io, - .init_uarts = s3c2416_init_uarts, - .init = s3c2416_init, - .name = name_s3c2416, - }, - { - .idcode = 0x32443001, - .idmask = 0xffffffff, - .map_io = s3c2443_map_io, - .init_uarts = s3c2443_init_uarts, - .init = s3c2443_init, - .name = name_s3c2443, - }, -}; - -/* minimal IO mapping */ - -static struct map_desc s3c_iodesc[] __initdata __maybe_unused = { - IODESC_ENT(GPIO), - IODESC_ENT(IRQ), - IODESC_ENT(MEMCTRL), - IODESC_ENT(UART) -}; - -/* read cpu identification code */ - -static unsigned long s3c24xx_read_idcode_v5(void) -{ -#if defined(CONFIG_CPU_S3C2416) - /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */ - - u32 gs = __raw_readl(S3C24XX_GSTATUS1); - - /* test for s3c2416 or similar device */ - if ((gs >> 16) == 0x3245) - return gs; -#endif - -#if defined(CONFIG_CPU_S3C2412) - return __raw_readl(S3C2412_GSTATUS1); -#else - return 1UL; /* don't look like an 2400 */ -#endif -} - -static unsigned long s3c24xx_read_idcode_v4(void) -{ - return __raw_readl(S3C2410_GSTATUS1); -} - -static void s3c24xx_default_idle(void) -{ - unsigned long tmp = 0; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static struct samsung_pwm_variant s3c24xx_pwm_variant = { - .bits = 16, - .div_base = 1, - .has_tint_cstat = false, - .tclk_mask = (1 << 4), -}; - -void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) -{ - arm_pm_idle = s3c24xx_default_idle; - - /* initialise the io descriptors we need for initialisation */ - iotable_init(mach_desc, size); - iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); - - if (cpu_architecture() >= CPU_ARCH_ARMv5) { - samsung_cpu_id = s3c24xx_read_idcode_v5(); - } else { - samsung_cpu_id = s3c24xx_read_idcode_v4(); - } - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - - samsung_pwm_set_platdata(&s3c24xx_pwm_variant); -} - -void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source) -{ - s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init s3c24xx_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s3c24xx_pwm_variant); -} - -/* Serial port registrations */ - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -static struct resource s3c2410_uart0_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), - [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ - IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \ - NULL, IORESOURCE_IRQ) -}; - -static struct resource s3c2410_uart1_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K), - [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \ - IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \ - NULL, IORESOURCE_IRQ) -}; - -static struct resource s3c2410_uart2_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K), - [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \ - IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \ - NULL, IORESOURCE_IRQ) -}; - -static struct resource s3c2410_uart3_resource[] = { - [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K), - [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \ - IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \ - NULL, IORESOURCE_IRQ) -}; - -struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { - [0] = { - .resources = s3c2410_uart0_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource), - }, - [1] = { - .resources = s3c2410_uart1_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource), - }, - [2] = { - .resources = s3c2410_uart2_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), - }, - [3] = { - .resources = s3c2410_uart3_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource), - }, -}; - -#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) })) - -#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ - defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) -static struct resource s3c2410_dma_resource[] = { - [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), - [1] = DEFINE_RES_IRQ(IRQ_DMA0), - [2] = DEFINE_RES_IRQ(IRQ_DMA1), - [3] = DEFINE_RES_IRQ(IRQ_DMA2), - [4] = DEFINE_RES_IRQ(IRQ_DMA3), -}; -#endif - -#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442) -static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { - [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, - [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, - [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | - S3C24XX_DMA_CHANREQ(2, 2) | - S3C24XX_DMA_CHANREQ(1, 3), - }, - [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, - [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, - [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, - [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, - [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, - [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | - S3C24XX_DMA_CHANREQ(3, 2) | - S3C24XX_DMA_CHANREQ(3, 3), - }, - [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | - S3C24XX_DMA_CHANREQ(1, 2), - }, - [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), }, - [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, - [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, - [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, - [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, -}; - -static const struct dma_slave_map s3c2410_dma_slave_map[] = { - { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI }, - { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX }, - { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX }, - { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX }, - { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX }, - /* - * The DMA request source[1] (DMACH_UARTx_SRC2) are - * not used in the UART driver. - */ - { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 }, - { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 }, - { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 }, - { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 }, - { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 }, - { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 }, - { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, - { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, - { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, - { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } -}; - -static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { - .num_phy_channels = 4, - .channels = s3c2410_dma_channels, - .num_channels = DMACH_MAX, - .slave_map = s3c2410_dma_slave_map, - .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map), -}; - -struct platform_device s3c2410_device_dma = { - .name = "s3c2410-dma", - .id = 0, - .num_resources = ARRAY_SIZE(s3c2410_dma_resource), - .resource = s3c2410_dma_resource, - .dev = { - .dma_mask = &s3c24xx_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c2410_dma_platdata, - }, -}; -#endif - -#ifdef CONFIG_CPU_S3C2412 -static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { - [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, - [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, - [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, - [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, - [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, - [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, - [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, - [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, - [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, - [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, - [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, - [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, - [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, - [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, - [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, - [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, - [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 }, - [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 }, - [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 }, - [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, -}; - -static const struct dma_slave_map s3c2412_dma_slave_map[] = { - { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI }, - { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX }, - { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX }, - { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX }, - { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX }, - { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, - { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, - { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, - { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, - { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, - { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, - { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN }, - { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT }, - { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, - { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } -}; - -static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { - .num_phy_channels = 4, - .channels = s3c2412_dma_channels, - .num_channels = DMACH_MAX, - .slave_map = s3c2412_dma_slave_map, - .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map), -}; - -struct platform_device s3c2412_device_dma = { - .name = "s3c2412-dma", - .id = 0, - .num_resources = ARRAY_SIZE(s3c2410_dma_resource), - .resource = s3c2410_dma_resource, - .dev = { - .dma_mask = &s3c24xx_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c2412_dma_platdata, - }, -}; -#endif - -#if defined(CONFIG_CPU_S3C2440) -static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { - [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, - [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, - [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | - S3C24XX_DMA_CHANREQ(6, 1) | - S3C24XX_DMA_CHANREQ(2, 2) | - S3C24XX_DMA_CHANREQ(1, 3), - }, - [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, - [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, - [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, - [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, - [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, - [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | - S3C24XX_DMA_CHANREQ(3, 2) | - S3C24XX_DMA_CHANREQ(3, 3), - }, - [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | - S3C24XX_DMA_CHANREQ(1, 2), - }, - [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) | - S3C24XX_DMA_CHANREQ(0, 2), - }, - [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) | - S3C24XX_DMA_CHANREQ(5, 2), - }, - [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) | - S3C24XX_DMA_CHANREQ(6, 3), - }, - [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) | - S3C24XX_DMA_CHANREQ(5, 3), - }, - [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, - [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, - [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, - [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, -}; - -static const struct dma_slave_map s3c2440_dma_slave_map[] = { - /* TODO: DMACH_XD0 */ - /* TODO: DMACH_XD1 */ - { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, - { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 }, - { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 }, - { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 }, - { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 }, - { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, - { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, - { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, - { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, - { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, - { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, - { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, - { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, - /* TODO: DMACH_TIMER */ - { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, - { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, - { "samsung-ac97", "rx", (void *)DMACH_PCM_IN }, - { "samsung-ac97", "tx", (void *)DMACH_PCM_OUT }, - { "samsung-ac97", "rx", (void *)DMACH_MIC_IN }, - { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, - { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, - { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, - { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, - { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } -}; - -static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { - .num_phy_channels = 4, - .channels = s3c2440_dma_channels, - .num_channels = DMACH_MAX, - .slave_map = s3c2440_dma_slave_map, - .slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map), -}; - -struct platform_device s3c2440_device_dma = { - .name = "s3c2410-dma", - .id = 0, - .num_resources = ARRAY_SIZE(s3c2410_dma_resource), - .resource = s3c2410_dma_resource, - .dev = { - .dma_mask = &s3c24xx_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c2440_dma_platdata, - }, -}; -#endif - -#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -static struct resource s3c2443_dma_resource[] = { - [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), - [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), - [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1), - [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2), - [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3), - [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4), - [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5), -}; - -static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { - [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, - [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, - [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, - [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, - [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, - [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, - [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, - [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, - [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, - [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, - [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 }, - [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, - [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, - [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, - [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 }, - [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, - [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, - [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, - [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 }, - [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 }, - [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, -}; - -static const struct dma_slave_map s3c2443_dma_slave_map[] = { - { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, - { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX }, - { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX }, - { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX }, - { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX }, - { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, - { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, - { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, - { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, - { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, - { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, - { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, - { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, - { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, - { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, -}; - -static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { - .num_phy_channels = 6, - .channels = s3c2443_dma_channels, - .num_channels = DMACH_MAX, - .slave_map = s3c2443_dma_slave_map, - .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map), -}; - -struct platform_device s3c2443_device_dma = { - .name = "s3c2443-dma", - .id = 0, - .num_resources = ARRAY_SIZE(s3c2443_dma_resource), - .resource = s3c2443_dma_resource, - .dev = { - .dma_mask = &s3c24xx_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c2443_dma_platdata, - }, -}; -#endif - -#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) -void __init s3c2410_init_clocks(int xtal) -{ - s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); -} -#endif - -#ifdef CONFIG_CPU_S3C2412 -void __init s3c2412_init_clocks(int xtal) -{ - s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); -} -#endif - -#ifdef CONFIG_CPU_S3C2416 -void __init s3c2416_init_clocks(int xtal) -{ - s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); -} -#endif - -#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) -void __init s3c2440_init_clocks(int xtal) -{ - s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); -} -#endif - -#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) -void __init s3c2442_init_clocks(int xtal) -{ - s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); -} -#endif - -#ifdef CONFIG_CPU_S3C2443 -void __init s3c2443_init_clocks(int xtal) -{ - s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); -} -#endif - -#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ - defined(CONFIG_CPU_S3C2442) -static struct resource s3c2410_dclk_resource[] = { - [0] = DEFINE_RES_MEM(0x56000084, 0x4), -}; - -static struct s3c2410_clk_platform_data s3c_clk_platform_data = { - .modify_misccr = s3c2410_modify_misccr, -}; - -struct platform_device s3c2410_device_dclk = { - .name = "s3c2410-dclk", - .id = 0, - .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), - .resource = s3c2410_dclk_resource, - .dev = { - .platform_data = &s3c_clk_platform_data, - }, -}; -#endif - -#ifndef CONFIG_COMPILE_TEST -#pragma message "The platform is deprecated and scheduled for removal. " \ - "Please reach to the maintainers of the platform " \ - "and linux-samsung-soc@vger.kernel.org if you still use it." \ - "Without such feedback, the platform will be removed after 2022." -#endif diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h deleted file mode 100644 index 34dd4ac507e9..000000000000 --- a/arch/arm/mach-s3c/s3c24xx.h +++ /dev/null @@ -1,124 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C24XX SoCs - */ - -#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H -#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ - -#include <linux/reboot.h> -#include "irqs.h" - -struct s3c2410_uartcfg; - -#ifdef CONFIG_CPU_S3C2410 -extern int s3c2410_init(void); -extern int s3c2410a_init(void); -extern void s3c2410_map_io(void); -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c2410_init_clocks(int xtal); -extern void s3c2410_init_irq(void); -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#define s3c2410a_init NULL -#endif - -#ifdef CONFIG_CPU_S3C2412 -extern int s3c2412_init(void); -extern void s3c2412_map_io(void); -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c2412_init_clocks(int xtal); -extern int s3c2412_baseclk_add(void); -extern void s3c2412_init_irq(void); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#endif - -#ifdef CONFIG_CPU_S3C2416 -extern int s3c2416_init(void); -extern void s3c2416_map_io(void); -extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c2416_init_clocks(int xtal); -extern int s3c2416_baseclk_add(void); -extern void s3c2416_init_irq(void); - -extern struct syscore_ops s3c2416_irq_syscore_ops; -#else -#define s3c2416_init_clocks NULL -#define s3c2416_init_uarts NULL -#define s3c2416_map_io NULL -#define s3c2416_init NULL -#endif - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) -extern void s3c244x_map_io(void); -extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s3c244x_init_uarts NULL -#endif - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); -extern void s3c2440_map_io(void); -extern void s3c2440_init_clocks(int xtal); -extern void s3c2440_init_irq(void); -#else -#define s3c2440_init NULL -#define s3c2440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); -extern void s3c2442_map_io(void); -extern void s3c2442_init_clocks(int xtal); -extern void s3c2442_init_irq(void); -#else -#define s3c2442_init NULL -#define s3c2442_map_io NULL -#endif - -#ifdef CONFIG_CPU_S3C2443 -extern int s3c2443_init(void); -extern void s3c2443_map_io(void); -extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c2443_init_clocks(int xtal); -extern int s3c2443_baseclk_add(void); -extern void s3c2443_init_irq(void); -#else -#define s3c2443_init_clocks NULL -#define s3c2443_init_uarts NULL -#define s3c2443_map_io NULL -#define s3c2443_init NULL -#endif - -extern struct syscore_ops s3c24xx_irq_syscore_ops; - -extern struct platform_device s3c2410_device_dma; -extern struct platform_device s3c2412_device_dma; -extern struct platform_device s3c2440_device_dma; -extern struct platform_device s3c2443_device_dma; - -extern struct platform_device s3c2410_device_dclk; - -enum s3c24xx_timer_mode { - S3C24XX_PWM0, - S3C24XX_PWM1, - S3C24XX_PWM2, - S3C24XX_PWM3, - S3C24XX_PWM4, -}; - -extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event, - enum s3c24xx_timer_mode source); -extern void __init s3c24xx_timer_init(void); - -#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c deleted file mode 100644 index 0d88366b234c..000000000000 --- a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2008 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// S3C24XX Base setup for i2c device - -#include <linux/kernel.h> -#include <linux/gpio.h> - -struct platform_device; - -#include <linux/platform_data/i2c-s3c2410.h> - -#include "gpio-cfg.h" -#include "regs-gpio.h" -#include "gpio-samsung.h" - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); - s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); -} diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c deleted file mode 100644 index 02131b3a731d..000000000000 --- a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2010 Promwad Innovation Company -// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> -// -// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) -// -// Based on mach-s3c64xx/setup-sdhci-gpio.c - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" -#include "sdhci.h" - -void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2)); -} - -void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2)); -} diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c deleted file mode 100644 index 93fa1bbc9d5c..000000000000 --- a/arch/arm/mach-s3c/setup-spi-s3c24xx.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// HS-SPI device setup for S3C2443/S3C2416 -// -// Copyright (C) 2011 Samsung Electronics Ltd. -// http://www.samsung.com/ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include "gpio-cfg.h" - -#include "hardware-s3c24xx.h" -#include "regs-gpio.h" - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - /* enable hsspi bit in misccr */ - s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1); - - s3c_gpio_cfgall_range(S3C2410_GPE(11), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} -#endif diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c deleted file mode 100644 index 57363eaeb7e8..000000000000 --- a/arch/arm/mach-s3c/setup-ts-s3c24xx.c +++ /dev/null @@ -1,29 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2010 Samsung Electronics Co., Ltd. -// http://www.samsung.com/ -// -// Based on S3C24XX setup for i2c device - -#include <linux/kernel.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/touchscreen-s3c2410.h> - -#include "gpio-cfg.h" -#include "gpio-samsung.h" - -/** - * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems - * @dev: Device to configure GPIO for (ignored) - * - * Configure the GPIO for the S3C2410 system, where we have external FETs - * connected to the device (later systems such as the S3C2440 integrate - * these into the device). - */ -void s3c24xx_ts_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c deleted file mode 100644 index 487485bcc2ab..000000000000 --- a/arch/arm/mach-s3c/simtec-audio.c +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2009 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// Audio setup for various Simtec S3C24XX implementations - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/io.h> - -#include "regs-gpio.h" -#include "gpio-samsung.h" -#include "gpio-cfg.h" - -#include <linux/platform_data/asoc-s3c24xx_simtec.h> -#include "devs.h" - -#include "bast.h" -#include "simtec.h" - -/* platform ops for audio */ - -static void simtec_audio_startup_lrroute(void) -{ - unsigned int tmp; - unsigned long flags; - - local_irq_save(flags); - - tmp = __raw_readb(BAST_VA_CTRL1); - tmp &= ~BAST_CPLD_CTRL1_LRMASK; - tmp |= BAST_CPLD_CTRL1_LRCDAC; - __raw_writeb(tmp, BAST_VA_CTRL1); - - local_irq_restore(flags); -} - -static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata; -static char our_name[32]; - -static struct platform_device simtec_audio_dev = { - .name = our_name, - .id = -1, - .dev = { - .parent = &s3c_device_iis.dev, - .platform_data = &simtec_audio_platdata, - }, -}; - -int __init simtec_audio_add(const char *name, bool has_lr_routing, - struct s3c24xx_audio_simtec_pdata *spd) -{ - if (!name) - name = "tlv320aic23"; - - snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name); - - /* copy platform data so the source can be __initdata */ - if (spd) - simtec_audio_platdata = *spd; - - if (has_lr_routing) - simtec_audio_platdata.startup = simtec_audio_startup_lrroute; - - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - platform_device_register(&s3c_device_iis); - platform_device_register(&simtec_audio_dev); - return 0; -} diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c deleted file mode 100644 index a6fba056a747..000000000000 --- a/arch/arm/mach-s3c/simtec-nor.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2008 Simtec Electronics -// http://armlinux.simtec.co.uk/ -// Ben Dooks <ben@simtec.co.uk> -// -// Simtec NOR mapping - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "map.h" - -#include "bast.h" -#include "simtec.h" - -static void simtec_nor_vpp(struct platform_device *pdev, int vpp) -{ - unsigned int val; - - val = __raw_readb(BAST_VA_CTRL3); - - printk(KERN_DEBUG "%s(%d)\n", __func__, vpp); - - if (vpp) - val |= BAST_CPLD_CTRL3_ROMWEN; - else - val &= ~BAST_CPLD_CTRL3_ROMWEN; - - __raw_writeb(val, BAST_VA_CTRL3); -} - -static struct physmap_flash_data simtec_nor_pdata = { - .width = 2, - .set_vpp = simtec_nor_vpp, - .nr_parts = 0, -}; - -static struct resource simtec_nor_resource[] = { - [0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M), -}; - -static struct platform_device simtec_device_nor = { - .name = "physmap-flash", - .id = -1, - .num_resources = ARRAY_SIZE(simtec_nor_resource), - .resource = simtec_nor_resource, - .dev = { - .platform_data = &simtec_nor_pdata, - }, -}; - -void __init nor_simtec_init(void) -{ - int ret; - - ret = platform_device_register(&simtec_device_nor); - if (ret < 0) - printk(KERN_ERR "failed to register physmap-flash device\n"); - else - simtec_nor_vpp(NULL, 1); -} diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c deleted file mode 100644 index 490256a766e2..000000000000 --- a/arch/arm/mach-s3c/simtec-pm.c +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2004 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://armlinux.simtec.co.uk/ -// -// Power Management helpers for Simtec S3C24XX implementations - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "map.h" -#include "regs-gpio.h" - -#include <asm/mach-types.h> - -#include "pm.h" - -#include "regs-mem-s3c24xx.h" - -#define COPYRIGHT ", Copyright 2005 Simtec Electronics" - -/* pm_simtec_init - * - * enable the power management functions -*/ - -static __init int pm_simtec_init(void) -{ - unsigned long gstatus4; - - /* check which machine we are running on */ - - if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris() && - !machine_is_aml_m5900()) - return 0; - - printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - return s3c_pm_init(); -} - -arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c deleted file mode 100644 index 76cedb5c7373..000000000000 --- a/arch/arm/mach-s3c/simtec-usb.c +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2004-2005 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// -// http://www.simtec.co.uk/products/EB2410ITX/ -// -// Simtec BAST and Thorcom VR1000 USB port support functions - -#define DEBUG - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/gpio.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "gpio-samsung.h" -#include "irqs.h" -#include <asm/irq.h> - -#include <linux/platform_data/usb-ohci-s3c2410.h> -#include "devs.h" - -#include "bast.h" -#include "simtec.h" - -/* control power and monitor over-current events on various Simtec - * designed boards. -*/ - -static unsigned int power_state[2]; - -static void -usb_simtec_powercontrol(int port, int to) -{ - pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to); - - power_state[port] = to; - - if (power_state[0] && power_state[1]) - gpio_set_value(S3C2410_GPB(4), 0); - else - gpio_set_value(S3C2410_GPB(4), 1); -} - -static irqreturn_t -usb_simtec_ocirq(int irq, void *pw) -{ - struct s3c2410_hcd_info *info = pw; - - if (gpio_get_value(S3C2410_GPG(10)) == 0) { - pr_debug("usb_simtec: over-current irq (oc detected)\n"); - s3c2410_usb_report_oc(info, 3); - } else { - pr_debug("usb_simtec: over-current irq (oc cleared)\n"); - s3c2410_usb_report_oc(info, 0); - } - - return IRQ_HANDLED; -} - -static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) -{ - int ret; - - if (on) { - ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "USB Over-current", info); - if (ret != 0) { - printk(KERN_ERR "failed to request usb oc irq\n"); - } - } else { - free_irq(BAST_IRQ_USBOC, info); - } -} - -static struct s3c2410_hcd_info usb_simtec_info __initdata = { - .port[0] = { - .flags = S3C_HCDFLG_USED - }, - .port[1] = { - .flags = S3C_HCDFLG_USED - }, - - .power_control = usb_simtec_powercontrol, - .enable_oc = usb_simtec_enableoc, -}; - - -int __init usb_simtec_init(void) -{ - int ret; - - printk("USB Power Control, Copyright 2004 Simtec Electronics\n"); - - ret = gpio_request(S3C2410_GPB(4), "USB power control"); - if (ret < 0) { - pr_err("%s: failed to get GPB4\n", __func__); - return ret; - } - - ret = gpio_request(S3C2410_GPG(10), "USB overcurrent"); - if (ret < 0) { - pr_err("%s: failed to get GPG10\n", __func__); - gpio_free(S3C2410_GPB(4)); - return ret; - } - - /* turn power on */ - gpio_direction_output(S3C2410_GPB(4), 1); - gpio_direction_input(S3C2410_GPG(10)); - - s3c_ohci_set_platdata(&usb_simtec_info); - return 0; -} diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h deleted file mode 100644 index d96bd60872b8..000000000000 --- a/arch/arm/mach-s3c/simtec.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Simtec common functions - */ - -struct s3c24xx_audio_simtec_pdata; - -extern void nor_simtec_init(void); - -extern int usb_simtec_init(void); - -extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, - struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S deleted file mode 100644 index 04aded98782b..000000000000 --- a/arch/arm/mach-s3c/sleep-s3c2410.S +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 Power Manager (Suspend-To-RAM) support - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - */ - -#include <linux/linkage.h> -#include <linux/serial_s3c.h> -#include <asm/assembler.h> -#include "map.h" - -#include "regs-gpio.h" -#include "regs-clock.h" - -#include "regs-mem-s3c24xx.h" - - /* s3c2410_cpu_suspend - * - * put the cpu into sleep mode - */ - -ENTRY(s3c2410_cpu_suspend) - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [r4] @ get REFRESH (and ensure in TLB) - ldr r8, [r5] @ get MISCCR (and ensure in TLB) - ldr r9, [r6] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 5 -s3c2410_do_sleep: - streq r7, [r4] @ SDRAM sleep command - streq r8, [r5] @ SDRAM power-down config - streq r9, [r6] @ CPU sleep -1: beq 1b - ret lr diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S deleted file mode 100644 index b4b61737fbb2..000000000000 --- a/arch/arm/mach-s3c/sleep-s3c2412.S +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 Power Manager low-level sleep support - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include "map.h" - -#include "regs-irq.h" - - .text - - .global s3c2412_sleep_enter - -s3c2412_sleep_enter: - mov r0, #0 /* argument for coprocessors */ - ldr r1, =S3C2410_INTPND - ldr r2, =S3C2410_SRCPND - ldr r3, =S3C2410_EINTPEND - - teq r0, r0 - bl s3c2412_sleep_enter1 - teq pc, r0 - bl s3c2412_sleep_enter1 - - .align 5 - - /* this is called twice, first with the Z flag to ensure that the - * instructions have been loaded into the cache, and the second - * time to try and suspend the system. - */ -s3c2412_sleep_enter1: - mcr p15, 0, r0, c7, c10, 4 - mcrne p15, 0, r0, c7, c0, 4 - - /* if we return from here, it is because an interrupt was - * active when we tried to shutdown. Try and ack the IRQ and - * retry, as simply returning causes the system to lock. - */ - - ldrne r9, [r1] - strne r9, [r1] - ldrne r9, [r2] - strne r9, [r2] - ldrne r9, [r3] - strne r9, [r3] - bne s3c2412_sleep_enter1 - - ret lr diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S deleted file mode 100644 index 4b2af91f3dce..000000000000 --- a/arch/arm/mach-s3c/sleep-s3c24xx.S +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 Power Manager (Suspend-To-RAM) support - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - */ - -#include <linux/linkage.h> -#include <linux/serial_s3c.h> -#include <asm/assembler.h> -#include "map.h" - -#include "regs-gpio.h" -#include "regs-clock.h" - -/* - * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not - * reset the UART configuration, only enable if you really need this! - */ -//#define S3C24XX_DEBUG_RESUME - - .text - - /* sleep magic, to allow the bootloader to check for an valid - * image to resume to. Must be the first word before the - * s3c_cpu_resume entry. - */ - - .word 0x2bedf00d - - /* s3c_cpu_resume - * - * resume code entry for bootloader to call - */ - -ENTRY(s3c_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE - msr cpsr_c, r0 - - @@ load UART to allow us to print the two characters for - @@ resume debug - - mov r2, #S3C24XX_PA_UART & 0xff000000 - orr r2, r2, #S3C24XX_PA_UART & 0xff000 - -#if 0 - /* SMDK2440 LED set */ - mov r14, #S3C24XX_PA_GPIO - ldr r12, [ r14, #0x54 ] - bic r12, r12, #3<<4 - orr r12, r12, #1<<7 - str r12, [ r14, #0x54 ] -#endif - -#ifdef S3C24XX_DEBUG_RESUME - mov r3, #'L' - strb r3, [ r2, #S3C2410_UTXH ] -1001: - ldrb r14, [ r3, #S3C2410_UTRSTAT ] - tst r14, #S3C2410_UTRSTAT_TXE - beq 1001b -#endif /* S3C24XX_DEBUG_RESUME */ - - b cpu_resume diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h deleted file mode 100644 index 919c5fd0c9af..000000000000 --- a/arch/arm/mach-s3c/spi-core-s3c24xx.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> - */ - -#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H -#define __PLAT_S3C_SPI_CORE_S3C24XX_H - -/* These functions are only for use with the core support code, such as - * the cpu specific initialisation code - */ - -/* re-define device name depending on support. */ -static inline void s3c24xx_spi_setname(char *name) -{ -#ifdef CONFIG_S3C64XX_DEV_SPI0 - s3c64xx_device_spi0.name = name; -#endif -} - -#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */ diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h deleted file mode 100644 index 3cfa296bec2a..000000000000 --- a/arch/arm/mach-s3c/vr1000.h +++ /dev/null @@ -1,113 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * VR1000 - CPLD control constants - * Machine VR1000 - IRQ Number definitions - * Machine VR1000 - Memory map definitions - */ - -#ifndef __MACH_S3C24XX_VR1000_H -#define __MACH_S3C24XX_VR1000_H __FILE__ - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -/* irq numbers to onboard peripherals */ - -#define VR1000_IRQ_USBOC IRQ_EINT19 -#define VR1000_IRQ_IDE0 IRQ_EINT16 -#define VR1000_IRQ_IDE1 IRQ_EINT17 -#define VR1000_IRQ_SERIAL IRQ_EINT12 -#define VR1000_IRQ_DM9000A IRQ_EINT10 -#define VR1000_IRQ_DM9000N IRQ_EINT9 -#define VR1000_IRQ_SMALERT IRQ_EINT8 - -/* map */ - -#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* - * 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __MACH_S3C24XX_VR1000_H */ diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 02e319508cc6..b4f538d7412f 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -85,8 +85,6 @@ config SAMSUNG_PM_CHECK Note, this can take several seconds depending on memory size and CPU speed. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config SAMSUNG_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" depends on PM && SAMSUNG_PM_CHECK @@ -97,8 +95,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but will identify any faults with better precision. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config EXYNOS_REGULATOR_COUPLER bool "Exynos SoC Regulator Coupler" if COMPILE_TEST depends on ARCH_EXYNOS || COMPILE_TEST diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h deleted file mode 100644 index 0fb65c3f2f59..000000000000 --- a/include/dt-bindings/clock/s3c2410.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * Device Tree binding constants clock controllers of Samsung S3C2410 and later. - */ - -#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H -#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H - -/* - * Let each exported clock get a unique index, which is used on DT-enabled - * platforms to lookup the clock from a clock specifier. These indices are - * therefore considered an ABI and so must not be changed. This implies - * that new clocks should be added either in free spaces between clock groups - * or at the end. - */ - -/* Core clocks. */ - -/* id 1 is reserved */ -#define MPLL 2 -#define UPLL 3 -#define FCLK 4 -#define HCLK 5 -#define PCLK 6 -#define UCLK 7 -#define ARMCLK 8 - -/* pclk-gates */ -#define PCLK_UART0 16 -#define PCLK_UART1 17 -#define PCLK_UART2 18 -#define PCLK_I2C 19 -#define PCLK_SDI 20 -#define PCLK_SPI 21 -#define PCLK_ADC 22 -#define PCLK_AC97 23 -#define PCLK_I2S 24 -#define PCLK_PWM 25 -#define PCLK_RTC 26 -#define PCLK_GPIO 27 - - -/* hclk-gates */ -#define HCLK_LCD 32 -#define HCLK_USBH 33 -#define HCLK_USBD 34 -#define HCLK_NAND 35 -#define HCLK_CAM 36 - - -#define CAMIF 40 - - -/* Total number of clocks. */ -#define NR_CLKS (CAMIF + 1) - -#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h deleted file mode 100644 index b4656156cc0f..000000000000 --- a/include/dt-bindings/clock/s3c2412.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * Device Tree binding constants clock controllers of Samsung S3C2412. - */ - -#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H -#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H - -/* - * Let each exported clock get a unique index, which is used on DT-enabled - * platforms to lookup the clock from a clock specifier. These indices are - * therefore considered an ABI and so must not be changed. This implies - * that new clocks should be added either in free spaces between clock groups - * or at the end. - */ - -/* Core clocks. */ - -/* id 1 is reserved */ -#define MPLL 2 -#define UPLL 3 -#define MDIVCLK 4 -#define MSYSCLK 5 -#define USYSCLK 6 -#define HCLK 7 -#define PCLK 8 -#define ARMDIV 9 -#define ARMCLK 10 - - -/* Special clocks */ -#define SCLK_CAM 16 -#define SCLK_UART 17 -#define SCLK_I2S 18 -#define SCLK_USBD 19 -#define SCLK_USBH 20 - -/* pclk-gates */ -#define PCLK_WDT 32 -#define PCLK_SPI 33 -#define PCLK_I2S 34 -#define PCLK_I2C 35 -#define PCLK_ADC 36 -#define PCLK_RTC 37 -#define PCLK_GPIO 38 -#define PCLK_UART2 39 -#define PCLK_UART1 40 -#define PCLK_UART0 41 -#define PCLK_SDI 42 -#define PCLK_PWM 43 -#define PCLK_USBD 44 - -/* hclk-gates */ -#define HCLK_HALF 48 -#define HCLK_X2 49 -#define HCLK_SDRAM 50 -#define HCLK_USBH 51 -#define HCLK_LCD 52 -#define HCLK_NAND 53 -#define HCLK_DMA3 54 -#define HCLK_DMA2 55 -#define HCLK_DMA1 56 -#define HCLK_DMA0 57 - -/* Total number of clocks. */ -#define NR_CLKS (HCLK_DMA0 + 1) - -#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h deleted file mode 100644 index a9d2f105d536..000000000000 --- a/include/dt-bindings/clock/s3c2443.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * Device Tree binding constants clock controllers of Samsung S3C2443 and later. - */ - -#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H -#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H - -/* - * Let each exported clock get a unique index, which is used on DT-enabled - * platforms to lookup the clock from a clock specifier. These indices are - * therefore considered an ABI and so must not be changed. This implies - * that new clocks should be added either in free spaces between clock groups - * or at the end. - */ - -/* Core clocks. */ -#define MSYSCLK 1 -#define ESYSCLK 2 -#define ARMDIV 3 -#define ARMCLK 4 -#define HCLK 5 -#define PCLK 6 -#define MPLL 7 -#define EPLL 8 - -/* Special clocks */ -#define SCLK_HSSPI0 16 -#define SCLK_FIMD 17 -#define SCLK_I2S0 18 -#define SCLK_I2S1 19 -#define SCLK_HSMMC1 20 -#define SCLK_HSMMC_EXT 21 -#define SCLK_CAM 22 -#define SCLK_UART 23 -#define SCLK_USBH 24 - -/* Muxes */ -#define MUX_HSSPI0 32 -#define MUX_HSSPI1 33 -#define MUX_HSMMC0 34 -#define MUX_HSMMC1 35 - -/* hclk-gates */ -#define HCLK_DMA0 48 -#define HCLK_DMA1 49 -#define HCLK_DMA2 50 -#define HCLK_DMA3 51 -#define HCLK_DMA4 52 -#define HCLK_DMA5 53 -#define HCLK_DMA6 54 -#define HCLK_DMA7 55 -#define HCLK_CAM 56 -#define HCLK_LCD 57 -#define HCLK_USBH 58 -#define HCLK_USBD 59 -#define HCLK_IROM 60 -#define HCLK_HSMMC0 61 -#define HCLK_HSMMC1 62 -#define HCLK_CFC 63 -#define HCLK_SSMC 64 -#define HCLK_DRAM 65 -#define HCLK_2D 66 - -/* pclk-gates */ -#define PCLK_UART0 72 -#define PCLK_UART1 73 -#define PCLK_UART2 74 -#define PCLK_UART3 75 -#define PCLK_I2C0 76 -#define PCLK_SDI 77 -#define PCLK_SPI0 78 -#define PCLK_ADC 79 -#define PCLK_AC97 80 -#define PCLK_I2S0 81 -#define PCLK_PWM 82 -#define PCLK_WDT 83 -#define PCLK_RTC 84 -#define PCLK_GPIO 85 -#define PCLK_SPI1 86 -#define PCLK_CHIPID 87 -#define PCLK_I2C1 88 -#define PCLK_I2S1 89 -#define PCLK_PCM 90 - -/* Total number of clocks. */ -#define NR_CLKS (PCLK_PCM + 1) - -#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h deleted file mode 100644 index b17166e3b49a..000000000000 --- a/include/linux/amba/pl093.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/amba/pl093.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * AMBA PL093 SSMC (synchronous static memory controller) - * See DDI0236.pdf (r0p4) for more details -*/ - -#define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */ - -/* Offsets for SMBxxxxRy registers */ - -#define SMBIDCYR (0x00) -#define SMBWSTRDR (0x04) -#define SMBWSTWRR (0x08) -#define SMBWSTOENR (0x0C) -#define SMBWSTWENR (0x10) -#define SMBCR (0x14) -#define SMBSR (0x18) -#define SMBWSTBRDR (0x1C) - -/* Masks for SMB registers */ -#define IDCY_MASK (0xf) -#define WSTRD_MASK (0xf) -#define WSTWR_MASK (0xf) -#define WSTOEN_MASK (0xf) -#define WSTWEN_MASK (0xf) - -/* Notes from datasheet: - * WSTOEN <= WSTRD - * WSTWEN <= WSTWR - * - * WSTOEN is not used with nWAIT - */ - -/* SMBCR bit definitions */ -#define SMBCR_BIWRITEEN (1 << 21) -#define SMBCR_ADDRVALIDWRITEEN (1 << 20) -#define SMBCR_SYNCWRITE (1 << 17) -#define SMBCR_BMWRITE (1 << 16) -#define SMBCR_WRAPREAD (1 << 14) -#define SMBCR_BIREADEN (1 << 13) -#define SMBCR_ADDRVALIDREADEN (1 << 12) -#define SMBCR_SYNCREAD (1 << 9) -#define SMBCR_BMREAD (1 << 8) -#define SMBCR_SMBLSPOL (1 << 6) -#define SMBCR_WP (1 << 3) -#define SMBCR_WAITEN (1 << 2) -#define SMBCR_WAITPOL (1 << 1) -#define SMBCR_RBLE (1 << 0) - -#define SMBCR_BURSTLENWRITE_MASK (3 << 18) -#define SMBCR_BURSTLENWRITE_4 (0 << 18) -#define SMBCR_BURSTLENWRITE_8 (1 << 18) -#define SMBCR_BURSTLENWRITE_RESERVED (2 << 18) -#define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18) - -#define SMBCR_BURSTLENREAD_MASK (3 << 10) -#define SMBCR_BURSTLENREAD_4 (0 << 10) -#define SMBCR_BURSTLENREAD_8 (1 << 10) -#define SMBCR_BURSTLENREAD_16 (2 << 10) -#define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10) - -#define SMBCR_MW_MASK (3 << 4) -#define SMBCR_MW_8BIT (0 << 4) -#define SMBCR_MW_16BIT (1 << 4) -#define SMBCR_MW_M32BIT (2 << 4) - -/* SSMC status registers */ -#define SSMCCSR (0x200) -#define SSMCCR (0x204) -#define SSMCITCR (0x208) -#define SSMCITIP (0x20C) -#define SSMCITIOP (0x210) |