Merge tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes: phy-for-5.12 - Updates: - Conversion to YAML binding for: - mtk-xsphy - mtk-tphy - mtk-ufs - HDMI PHY - MIPI DSI PHY - brcmstb-usb-phy - Support for BCM4908 usb phy - Support for Qualcomm SDX55 USB and QMP phy - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy - Support for Qualcomm SDM660 USB and UFS phy - Support for Qualcomm SC8180X USB and UFS phy - Support for Qualcomm IPQ6018 USB phy - Stm32 phy updates * tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: cpcap-usb: Simplify bool conversion phy: qcom-qmp: make a const array static, makes object smaller phy: zynqmp: Simplify code by using dev_err_probe() phy: qcom-qmp: Add support for SM8350 UFS phy phy: qcom-qmp: Add UFS V5 registers found in SM8350 dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings phy: qualcomm: usb28nm: Add MDM9607 init sequence dt-bindings: phy: qcom,qusb2: document ipq6018 compatible phy: qcom-qusb2: add QUSB2 support for IPQ6018 phy: qcom-qmp: Add SC8180X USB phy phy: qcom-qmp: Add SC8180X UFS phy dt-bindings: phy: qcom,qmp: Add SC8180X USB phy dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding dt-bindings: phy: qcom-qusb2: Document SDM660 compatible phy: qcom-qusb2: Add configuration for SDM660 phy: qcom-qusb2: Allow specifying default clock scheme dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings phy: qcom-qmp: Add SM8350 USB QMP PHYs dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings phy: qcom-qmp: Add support for SDX55 QMP PHY ...
author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-02-09 09:32:35 +0100
committer: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-02-09 09:32:35 +0100
commit: 47ddb856c20fe07e6caf8e43cc8bd6c2077342d4 (patch)
tree: 49987d214b5251f681c9dbf35ab6d248bc064daa
parent: f3be861362665acaaa6c271066e0aaced423a7c3 (diff)
parent: d68f2cb095979dff1c99e7803c7730ec2b53fc83 (diff)
30 files changed, 1835 insertions, 564 deletions
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index f06f24d405a5..8238a86686be 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -22,23 +22,7 @@ Required properties:
 MIPI TX Configuration Module
 ============================
 
-The MIPI TX configuration module controls the MIPI D-PHY.
-
-Required properties:
-- compatible: "mediatek,<chip>-mipi-tx"
-- the supported chips are mt2701, 7623, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- clocks: PLL reference clock
-- clock-output-names: name of the output clock line to the DSI encoder
-- #clock-cells: must be <0>;
-- #phy-cells: must be <0>.
-
-Optional properties:
-- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
-						   the step is 200.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
-               unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
+See phy/mediatek,dsi-phy.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 6b1c586403e4..b284ca51b913 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -53,23 +53,7 @@ Required properties:
 
 HDMI PHY
 ========
-
-The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
-output and drives the HDMI pads.
-
-Required properties:
-- compatible: "mediatek,<chip>-hdmi-phy"
-- the supported chips are mt2701, mt7623 and mt8173
-- reg: Physical base address and length of the module's registers
-- clocks: PLL reference clock
-- clock-names: must contain "pll_ref"
-- clock-output-names: must be "hdmitx_dig_cts" on mt8173
-- #phy-cells: must be <0>
-- #clock-cells: must be <0>
-
-Optional properties:
-- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa
-- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c
+See phy/mediatek,hdmi-phy.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
deleted file mode 100644
index 698aacbdcfc4..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Broadcom STB USB PHY
-
-Required properties:
-- compatible: should be one of
-	"brcm,brcmstb-usb-phy"
-	"brcm,bcm7216-usb-phy"
-	"brcm,bcm7211-usb-phy"
-
-- reg and reg-names properties requirements are specific to the
-  compatible string.
-  "brcm,brcmstb-usb-phy":
-    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
-           and an optional pair for systems with USB 3.x support
-    - reg-names: not specified
-  "brcm,bcm7216-usb-phy":
-    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
-           registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
-  "brcm,bcm7211-usb-phy":
-    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
-           USB_PHY and USB_MDIO registers and an optional pair
-	   for the BDC registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-
-- #phy-cells: Shall be 1 as it expects one argument for setting
-	      the type of the PHY. Possible values are:
-	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-	      - PHY_TYPE_USB3 for USB3.x PHY
-
-Optional Properties:
-- clocks : clock phandles.
-- clock-names: String, clock name.
-- interrupts: wakeup interrupt
-- interrupt-names: "wakeup"
-- brcm,ipp: Boolean, Invert Port Power.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- brcm,ioc: Boolean, Invert Over Current detection.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- dr_mode: String, PHY Device mode.
-  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
-  If this property is not defined, the phy will default to "host" mode.
-- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-
-
-Example:
-
-usbphy_0: usb-phy@f0470200 {
-	reg = <0xf0470200 0xb8>,
-		<0xf0471940 0x6c0>;
-	compatible = "brcm,brcmstb-usb-phy";
-	#phy-cells = <1>;
-	dr_mode = "host"
-	brcm,ioc = <1>;
-	brcm,ipp = <1>;
-	brcm,has-xhci;
-	brcm,has-eohci;
-	clocks = <&usb20>, <&usb30>;
-	clock-names = "sw_usb", "sw_usb3";
-};
-
-usb-phy@29f0200 {
-	reg = <0x29f0200 0x200>,
-		<0x29c0880 0x30>,
-		<0x29cc100 0x534>,
-		<0x2808000 0x24>,
-		<0x2980080 0x8>;
-	reg-names = "ctrl",
-		"xhci_ec",
-		"xhci_gbl",
-		"usb_phy",
-		"usb_mdio";
-	brcm,ioc = <0x0>;
-	brcm,ipp = <0x0>;
-	compatible = "brcm,bcm7211-usb-phy";
-	interrupts = <0x30>;
-	interrupt-parent = <&vpu_intr1_nosec_intc>;
-	interrupt-names = "wake";
-	#phy-cells = <0x1>;
-	brcm,has-xhci;
-	syscon-piarbctl = <&syscon_piarbctl>;
-	clocks = <&scmi_clk 256>;
-	clock-names = "sw_usb";
-};
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
new file mode 100644
index 000000000000..0497368d1fca
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB PHY
+
+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4908-usb-phy
+      - brcm,bcm7211-usb-phy
+      - brcm,bcm7216-usb-phy
+      - brcm,brcmstb-usb-phy
+
+  reg:
+    minItems: 1
+    maxItems: 6
+    items:
+      - description: the base CTRL register
+      - description: XHCI EC register
+      - description: XHCI GBL register
+      - description: USB PHY register
+      - description: USB MDIO register
+      - description: BDC register
+
+  reg-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      - const: ctrl
+      - const: xhci_ec
+      - const: xhci_gbl
+      - const: usb_phy
+      - const: usb_mdio
+      - const: bdc_ec
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: sw_usb
+      - const: sw_usb3
+
+  interrupts:
+    description: wakeup interrupt
+
+  interrupt-names:
+    const: wake
+
+  brcm,ipp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Port Power
+    minimum: 0
+    maximum: 1
+
+  brcm,ioc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Over Current detection
+    minimum: 0
+    maximum: 1
+
+  dr_mode:
+    description: PHY Device mode. If this property is not defined, the PHY will
+      default to "host" mode.
+    enum:
+      - host
+      - peripheral
+      - drd
+      - typec-pd
+
+  brcm,syscon-piarbctl:
+    description: phandle to syscon for handling config registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  brcm,has-xhci:
+    description: Indicates the PHY has an XHCI PHY.
+    type: boolean
+
+  brcm,has-eohci:
+    description: Indicates the PHY has an EHCI/OHCI PHY.
+    type: boolean
+
+  "#phy-cells":
+    description: |
+      Cell allows setting the type of the PHY. Possible values are:
+      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+      - PHY_TYPE_USB3 for USB3.x PHY
+    const: 1
+
+required:
+  - reg
+  - "#phy-cells"
+
+anyOf:
+  - required:
+      - brcm,has-xhci
+  - required:
+      - brcm,has-eohci
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: brcm,bcm4908-usb-phy
+              - const: brcm,brcmstb-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7211-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@f0470200 {
+        compatible = "brcm,brcmstb-usb-phy";
+        reg = <0xf0470200 0xb8>,
+              <0xf0471940 0x6c0>;
+        #phy-cells = <1>;
+        dr_mode = "host";
+        brcm,ioc = <1>;
+        brcm,ipp = <1>;
+        brcm,has-xhci;
+        brcm,has-eohci;
+        clocks = <&usb20>, <&usb30>;
+        clock-names = "sw_usb", "sw_usb3";
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@29f0200 {
+        compatible = "brcm,bcm7211-usb-phy";
+        reg = <0x29f0200 0x200>,
+              <0x29c0880 0x30>,
+              <0x29cc100 0x534>,
+              <0x2808000 0x24>,
+              <0x2980080 0x8>;
+        reg-names = "ctrl",
+            "xhci_ec",
+            "xhci_gbl",
+            "usb_phy",
+            "usb_mdio";
+        brcm,ioc = <0x0>;
+        brcm,ipp = <0x0>;
+        interrupts = <0x30>;
+        interrupt-parent = <&vpu_intr1_nosec_intc>;
+        interrupt-names = "wake";
+        #phy-cells = <0x1>;
+        brcm,has-xhci;
+        brcm,syscon-piarbctl = <&syscon_piarbctl>;
+        clocks = <&scmi_clk 256>;
+        clock-names = "sw_usb";
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
new file mode 100644
index 000000000000..71d4acea1f66
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: The MIPI DSI PHY supports up to 4-lane output.
+
+properties:
+  $nodename:
+    pattern: "^dsi-phy@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - mediatek,mt2701-mipi-tx
+      - mediatek,mt7623-mipi-tx
+      - mediatek,mt8173-mipi-tx
+      - mediatek,mt8183-mipi-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 1
+    description: A phandle to the calibration data provided by a nvmem device,
+      if unspecified, default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+  drive-strength-microamp:
+    description: adjust driving current
+    multipleOf: 200
+    minimum: 2000
+    maximum: 6000
+    default: 4600
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    dsi-phy@10215000 {
+        compatible = "mediatek,mt8173-mipi-tx";
+        reg = <0x10215000 0x1000>;
+        clocks = <&clk26m>;
+        clock-output-names = "mipi_tx0_pll";
+        drive-strength-microamp = <4000>;
+        nvmem-cells= <&mipi_tx_calibration>;
+        nvmem-cell-names = "calibration-data";
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
new file mode 100644
index 000000000000..4752517a1446
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
+  output and drives the HDMI pads.
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - mediatek,mt2701-hdmi-phy
+      - mediatek,mt7623-hdmi-phy
+      - mediatek,mt8173-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: pll_ref
+
+  clock-output-names:
+    items:
+      - const: hdmitx_dig_cts
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  mediatek,ibias:
+    description:
+      TX DRV bias current for < 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0xa
+
+  mediatek,ibias_up:
+    description:
+      TX DRV bias current for >= 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0x1c
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    hdmi_phy: hdmi-phy@10209100 {
+        compatible = "mediatek,mt8173-hdmi-phy";
+        reg = <0x10209100 0x24>;
+        clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+        clock-names = "pll_ref";
+        clock-output-names = "hdmitx_dig_cts";
+        mediatek,ibias = <0xa>;
+        mediatek,ibias_up = <0x1c>;
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
new file mode 100644
index 000000000000..602e6ff45785
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The T-PHY controller supports physical layer functionality for a number of
+  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+  Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
+  T-PHY V2 (mt2712) when works on USB mode:
+  -----------------------------------
+  Version 1:
+  port        offset    bank
+  shared      0x0000    SPLLC
+              0x0100    FMREG
+  u2 port0    0x0800    U2PHY_COM
+  u3 port0    0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    U2PHY_COM
+  u3 port1    0x1100    U3PHYD
+              0x1200    U3PHYD_BANK2
+              0x1300    U3PHYA
+              0x1400    U3PHYA_DA
+  u2 port2    0x1800    U2PHY_COM
+              ...
+
+  Version 2:
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u3 port0    0x0700    SPLLC
+              0x0800    CHIP
+              0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u3 port1    0x1700    SPLLC
+              0x1800    CHIP
+              0x1900    U3PHYD
+              0x1a00    U3PHYD_BANK2
+              0x1b00    U3PHYA
+              0x1c00    U3PHYA_DA
+  u2 port2    0x2000    MISC
+              ...
+
+  SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
+  into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
+  added on V2.
+
+properties:
+  $nodename:
+    pattern: "^t-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-tphy
+              - mediatek,mt7623-tphy
+              - mediatek,mt7622-tphy
+              - mediatek,mt8516-tphy
+          - const: mediatek,generic-tphy-v1
+      - items:
+          - enum:
+              - mediatek,mt2712-tphy
+              - mediatek,mt7629-tphy
+              - mediatek,mt8183-tphy
+          - const: mediatek,generic-tphy-v2
+      - const: mediatek,mt2701-u3phy
+        deprecated: true
+      - const: mediatek,mt2712-u3phy
+        deprecated: true
+      - const: mediatek,mt8173-u3phy
+
+  reg:
+    description:
+      Register shared by multiple ports, exclude port's private register.
+      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+      T-PHY V2, such as mt2712.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  # Used with non-empty value if optional 'reg' is not provided.
+  # The format of the value is an arbitrary number of triplets of
+  # (child-bus-address, parent-bus-address, length).
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 28
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 1
+        maxItems: 2
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+          - description: Reference clock of analog phy
+        description:
+          Uses both clocks if the clock of analog and digital phys are
+          separated, otherwise uses "ref" clock only if needed.
+
+      clock-names:
+        minItems: 1
+        maxItems: 2
+        items:
+          - const: ref
+          - const: da_ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+                - PHY_TYPE_PCIE
+                - PHY_TYPE_SATA
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,intr:
+        description:
+          The selection of internal resistor (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,discth:
+        description:
+          The selection of disconnect threshold (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 15
+
+      mediatek,bc12:
+        description:
+          Specify the flag to enable BC1.2 if support it
+        type: boolean
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        phys = <&u2port0 PHY_TYPE_USB2>,
+               <&u3port0 PHY_TYPE_USB3>,
+               <&u2port1 PHY_TYPE_USB2>;
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+    };
+
+    t-phy@11290000 {
+        compatible = "mediatek,mt8173-u3phy";
+        reg = <0x11290000 0x800>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11290800 {
+            reg = <0x11290800 0x100>;
+            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
+            clock-names = "ref", "da_ref";
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11290900 {
+            reg = <0x11290900 0x700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+        };
+
+        u2port1: usb-phy@11291000 {
+            reg = <0x11291000 0x100>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
new file mode 100644
index 000000000000..3a9be82e7f13
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Flash Storage (UFS) M-PHY binding
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
+  Each UFS M-PHY node should have its own node.
+  To bind UFS M-PHY with UFS host controller, the controller node should
+  contain a phandle reference to UFS M-PHY node.
+
+properties:
+  $nodename:
+    pattern: "^ufs-phy@[0-9a-f]+$"
+
+  compatible:
+    const: mediatek,mt8183-ufsphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Unipro core control clock.
+      - description: M-PHY core control clock.
+
+  clock-names:
+    items:
+      - const: unipro
+      - const: mp
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    ufsphy: ufs-phy@11fa0000 {
+        compatible = "mediatek,mt8183-ufsphy";
+        reg = <0x11fa0000 0xc000>;
+        clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+                 <&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>;
+        clock-names = "unipro", "mp";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
new file mode 100644
index 000000000000..598fd2b95c29
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek XS-PHY Controller Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The XS-PHY controller supports physical layer functionality for USB3.1
+  GEN2 controller on MediaTek SoCs.
+
+  Banks layout of xsphy
+  ----------------------------------
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u2 port2    0x2000    MISC
+              ...
+  u31 common  0x3000    DIG_GLB
+              0x3100    PHYA_GLB
+  u31 port0   0x3400    DIG_LN_TOP
+              0x3500    DIG_LN_TX0
+              0x3600    DIG_LN_RX0
+              0x3700    DIG_LN_DAIF
+              0x3800    PHYA_LN
+  u31 port1   0x3a00    DIG_LN_TOP
+              0x3b00    DIG_LN_TX0
+              0x3c00    DIG_LN_RX0
+              0x3d00    DIG_LN_DAIF
+              0x3e00    PHYA_LN
+              ...
+  DIG_GLB & PHYA_GLB are shared by U31 ports.
+
+properties:
+  $nodename:
+    pattern: "^xs-phy@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt3611-xsphy
+          - mediatek,mt3612-xsphy
+      - const: mediatek,xsphy
+
+  reg:
+    description:
+      Register shared by multiple U3 ports, exclude port's private register,
+      if only U2 ports provided, shouldn't use the property.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 17
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+
+      clock-names:
+        items:
+          - const: ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,efuse-intr:
+        description:
+          The selection of Internal Resistor (U2/U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 63
+
+      mediatek,efuse-tx-imp:
+        description:
+          The selection of TX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,efuse-rx-imp:
+        description:
+          The selection of RX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    u3phy: xs-phy@11c40000 {
+        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
+        reg = <0x11c43000 0x0200>;
+        mediatek,src-ref-clk-mhz = <26>;
+        mediatek,src-coef = <17>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11c40000 {
+            reg = <0x11c40000 0x0400>;
+            clocks = <&clk48m>;
+            clock-names = "ref";
+            mediatek,eye-src = <4>;
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11c43000 {
+            reg = <0x11c43400 0x0500>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            mediatek,efuse-intr = <28>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
deleted file mode 100644
index dd75b676b71d..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-MediaTek T-PHY binding
---------------------------
-
-T-phy controller supports physical layer functionality for a number of
-controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
-
-Required properties (controller (parent) node):
- - compatible	: should be one of
-		  "mediatek,generic-tphy-v1"
-		  "mediatek,generic-tphy-v2"
-		  "mediatek,mt2701-u3phy" (deprecated)
-		  "mediatek,mt2712-u3phy" (deprecated)
-		  "mediatek,mt8173-u3phy";
-		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
-		  "mediatek,generic-tphy-v2" on mt2712 instead.
-
-- #address-cells:	the number of cells used to represent physical
-		base addresses.
-- #size-cells:	the number of cells used to represent the size of an address.
-- ranges:	the address mapping relationship to the parent, defined with
-		- empty value: if optional 'reg' is used.
-		- non-empty value: if optional 'reg' is not used. should set
-			the child's base address to 0, the physical address
-			within parent's address space, and the length of
-			the address map.
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple ports,
-		  exclude port's private register. It is needed on mt2701
-		  and mt8173, but not on mt2712.
- - mediatek,src-ref-clk-mhz	: frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- #phy-cells	: should be 1 (See second example)
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-			- PHY_TYPE_PCIE
-			- PHY_TYPE_SATA
-
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: may contain
-		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
-			reference clock for SuperSpeed (digital) phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-		  "da_ref": the reference clock of analog phy, used if the clocks
-			of analog and digital phys are separated, otherwise uses
-			"ref" clock only if needed.
-
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,bc12	: bool, enable BC12 of u2phy if support it
-- mediatek,discth	: u32, the selection of disconnect threshold
-- mediatek,intr	: u32, the selection of internal R (resistance)
-
-Example:
-
-u3phy: usb-phy@11290000 {
-	compatible = "mediatek,mt8173-u3phy";
-	reg = <0 0x11290000 0 0x800>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11290800 {
-		reg = <0 0x11290800 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11290900 {
-		reg = <0 0x11290800 0 0x700>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u2port1: usb-phy@11291000 {
-		reg = <0 0x11291000 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-};
-
-Specifying phy control of devices
----------------------------------
-
-Device nodes should specify the configuration required in their "phys"
-property, containing a phandle to the phy port node and a device type;
-phy-names for each port are optional.
-
-Example:
-
-#include <dt-bindings/phy/phy.h>
-
-usb30: usb@11270000 {
-	...
-	phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-	phy-names = "usb2-0", "usb3-0";
-	...
-};
-
-
-Layout differences of banks between mt8173/mt2701 and mt2712
--------------------------------------------------------------
-mt8173 and mt2701:
-port        offset    bank
-shared      0x0000    SPLLC
-            0x0100    FMREG
-u2 port0    0x0800    U2PHY_COM
-u3 port0    0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    U2PHY_COM
-u3 port1    0x1100    U3PHYD
-            0x1200    U3PHYD_BANK2
-            0x1300    U3PHYA
-            0x1400    U3PHYA_DA
-u2 port2    0x1800    U2PHY_COM
-            ...
-
-mt2712:
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u3 port0    0x0700    SPLLC
-            0x0800    CHIP
-            0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u3 port1    0x1700    SPLLC
-            0x1800    CHIP
-            0x1900    U3PHYD
-            0x1a00    U3PHYD_BANK2
-            0x1b00    U3PHYA
-            0x1c00    U3PHYA_DA
-u2 port2    0x2000    MISC
-            ...
-
-    SPLLC shared by u3 ports and FMREG shared by u2 ports on
-mt8173/mt2701 are put back into each port; a new bank MISC for
-u2 ports and CHIP for u3 ports are added on mt2712.
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
deleted file mode 100644
index 5789029a1d42..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-MediaTek Universal Flash Storage (UFS) M-PHY binding
---------------------------------------------------------
-
-UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
-Each UFS M-PHY node should have its own node.
-
-To bind UFS M-PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS M-PHY nodes:
-- compatible         : Compatible list, contains the following controller:
-                       "mediatek,mt8183-ufsphy" for ufs phy
-                       persent on MT81xx chipsets.
-- reg                : Address and length of the UFS M-PHY register set.
-- #phy-cells         : This property shall be set to 0.
-- clocks             : List of phandle and clock specifier pairs.
-- clock-names        : List of clock input name strings sorted in the same
-                       order as the clocks property. Following clocks are
-                       mandatory.
-                       "unipro": Unipro core control clock.
-                       "mp": M-PHY core control clock.
-
-Example:
-
-	ufsphy: phy@11fa0000 {
-		compatible = "mediatek,mt8183-ufsphy";
-		reg = <0 0x11fa0000 0 0xc000>;
-		#phy-cells = <0>;
-
-		clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
-			 <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
-		clock-names = "unipro", "mp";
-	};
-
-	ufshci@11270000 {
-		...
-		phys = <&ufsphy>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
deleted file mode 100644
index e7caefa0b9c2..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-MediaTek XS-PHY binding
---------------------------
-
-The XS-PHY controller supports physical layer functionality for USB3.1
-GEN2 controller on MediaTek SoCs.
-
-Required properties (controller (parent) node):
- - compatible	: should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
-		  soc-model is the name of SoC, such as mt3611 etc;
-		  when using "mediatek,xsphy" compatible string, you need SoC specific
-		  ones in addition, one of:
-		  - "mediatek,mt3611-xsphy"
-
- - #address-cells, #size-cells : should use the same values as the root node
- - ranges: must be present
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple U3 ports,
-		  exclude port's private register, if only U2 ports provided,
-		  shouldn't use the property.
- - mediatek,src-ref-clk-mhz	: u32, frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: u32, coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeedPlus analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-- #phy-cells	: should be 1
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-
-The following optional properties are only for debug or HQA test
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-
-Optional properties (PHY_TYPE_USB3 port (child) node):
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-- mediatek,efuse-tx-imp	: u32, the selection of TX Impedance
-- mediatek,efuse-rx-imp	: u32, the selection of RX Impedance
-
-Banks layout of xsphy
--------------------------------------------------------------
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u2 port2    0x2000    MISC
-            ...
-u31 common  0x3000    DIG_GLB
-            0x3100    PHYA_GLB
-u31 port0   0x3400    DIG_LN_TOP
-            0x3500    DIG_LN_TX0
-            0x3600    DIG_LN_RX0
-            0x3700    DIG_LN_DAIF
-            0x3800    PHYA_LN
-u31 port1   0x3a00    DIG_LN_TOP
-            0x3b00    DIG_LN_TX0
-            0x3c00    DIG_LN_RX0
-            0x3d00    DIG_LN_DAIF
-            0x3e00    PHYA_LN
-            ...
-
-DIG_GLB & PHYA_GLB are shared by U31 ports.
-
-Example:
-
-u3phy: usb-phy@11c40000 {
-	compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
-	reg = <0 0x11c43000 0 0x0200>;
-	mediatek,src-ref-clk-mhz = <26>;
-	mediatek,src-coef = <17>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11c40000 {
-		reg = <0 0x11c40000 0 0x0400>;
-		clocks = <&clk48m>;
-		clock-names = "ref";
-		mediatek,eye-src = <4>;
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11c43000 {
-		reg = <0 0x11c43400 0 0x0500>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		mediatek,efuse-intr = <28>;
-		#phy-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 0ba61979b970..46df6786727a 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -45,6 +45,12 @@ properties:
   "#size-cells":
     const: 0
 
+  vdda1v1-supply:
+    description: regulator providing 1V1 power supply to the PLL block
+
+  vdda1v8-supply:
+    description: regulator providing 1V8 power supply to the PLL block
+
 #Required child nodes:
 
 patternProperties:
@@ -61,12 +67,6 @@ patternProperties:
       phy-supply:
         description: regulator providing 3V3 power supply to the PHY.
 
-      vdda1v1-supply:
-        description: regulator providing 1V1 power supply to the PLL block
-
-      vdda1v8-supply:
-        description: regulator providing 1V8 power supply to the PLL block
-
       "#phy-cells":
         enum: [ 0x0, 0x1 ]
 
@@ -90,8 +90,6 @@ patternProperties:
     required:
       - reg
       - phy-supply
-      - vdda1v1-supply
-      - vdda1v8-supply
       - "#phy-cells"
 
     additionalProperties: false
@@ -102,6 +100,8 @@ required:
   - clocks
   - "#address-cells"
   - "#size-cells"
+  - vdda1v1-supply
+  - vdda1v8-supply
   - usb-phy@0
   - usb-phy@1
 
@@ -116,22 +116,20 @@ examples:
         reg = <0x5a006000 0x1000>;
         clocks = <&rcc USBPHY_K>;
         resets = <&rcc USBPHY_R>;
+        vdda1v1-supply = <&reg11>;
+        vdda1v8-supply = <&reg18>;
         #address-cells = <1>;
         #size-cells = <0>;
 
         usbphyc_port0: usb-phy@0 {
             reg = <0>;
             phy-supply = <&vdd_usb>;
-            vdda1v1-supply = <&reg11>;
-            vdda1v8-supply = <&reg18>;
             #phy-cells = <0>;
         };
 
         usbphyc_port1: usb-phy@1 {
             reg = <1>;
             phy-supply = <&vdd_usb>;
-            vdda1v1-supply = <&reg11>;
-            vdda1v8-supply = <&reg18>;
             #phy-cells = <1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index ec05db374645..626447fee092 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -25,19 +25,32 @@ properties:
       - qcom,msm8998-qmp-pcie-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
+      - qcom,sc8180x-qmp-ufs-phy
+      - qcom,sc8180x-qmp-usb3-phy
       - qcom,sdm845-qhp-pcie-phy
       - qcom,sdm845-qmp-pcie-phy
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8150-qmp-usb3-phy
+      - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8250-qmp-gen3x1-pcie-phy
       - qcom,sm8250-qmp-gen3x2-pcie-phy
       - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8250-qmp-usb3-phy
+      - qcom,sm8250-qmp-usb3-uni-phy
+      - qcom,sm8350-qmp-ufs-phy
+      - qcom,sm8350-qmp-usb3-phy
+      - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,sdx55-qmp-usb3-uni-phy
 
   reg:
+    minItems: 1
+    maxItems: 2
     items:
       - description: Address and length of PHY's common serdes block.
+      - description: Address and length of PHY's DP_COM control block.
 
   "#clock-cells":
     enum: [ 1, 2 ]
@@ -136,6 +149,32 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sdx55-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,msm8996-qmp-pcie-phy
     then:
       properties:
@@ -285,6 +324,64 @@ allOf:
         reset-names:
           items:
             - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: 19.2 MHz ref clk source.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index d457fb6a4779..9f9cf07b7d45 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -21,6 +21,8 @@ properties:
               - qcom,ipq8074-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
+              - qcom,sdm660-qusb2-phy
+              - qcom,ipq6018-qusb2-phy
       - items:
           - enum:
               - qcom,sc7180-qusb2-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
index ca6a0836b53c..abcc4373f39e 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - qcom,usb-hs-28nm-femtophy
+      - qcom,usb-hs-28nm-mdm9607
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 4949a2851532..ee77c6458326 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -17,6 +17,8 @@ properties:
     enum:
       - qcom,usb-snps-hs-7nm-phy
       - qcom,sm8150-usb-hs-phy
+      - qcom,sm8250-usb-hs-phy
+      - qcom,sm8350-usb-hs-phy
       - qcom,usb-snps-femto-v2-phy
 
   reg:
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index c33e9bc79521..bbbd85501ada 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -151,7 +151,7 @@ patternProperties:
       WIZ node should have '1' subnode for the SERDES. It could be either
       Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
       bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
       Torrent SERDES should follow the bindings specified in
       Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index a1f1a9c90d0d..09256339bd04 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -91,10 +91,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB
+	default ARCH_BCM4908
 	default ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 99fbc7e4138b..116fb23aebd9 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
@@ -34,7 +35,7 @@ struct value_to_name_map {
 };
 
 struct match_chip_info {
-	void *init_func;
+	void (*init_func)(struct brcm_usb_init_params *params);
 	u8 required_regs[BRCM_REGS_MAX + 1];
 	u8 optional_reg;
 };
@@ -286,6 +287,10 @@ static const struct match_chip_info chip_info_7445 = {
 
 static const struct of_device_id brcm_usb_dt_ids[] = {
 	{
+		.compatible = "brcm,bcm4908-usb-phy",
+		.data = &chip_info_7445,
+	},
+	{
 		.compatible = "brcm,bcm7216-usb-phy",
 		.data = &chip_info_7216,
 	},
@@ -427,8 +432,6 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	struct device_node *dn = pdev->dev.of_node;
 	int err;
 	const char *mode;
-	const struct of_device_id *match;
-	void (*dvr_init)(struct brcm_usb_init_params *params);
 	const struct match_chip_info *info;
 	struct regmap *rmap;
 	int x;
@@ -441,10 +444,11 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	priv->ini.family_id = brcmstb_get_family_id();
 	priv->ini.product_id = brcmstb_get_product_id();
 
-	match = of_match_node(brcm_usb_dt_ids, dev->of_node);
-	info = match->data;
-	dvr_init = info->init_func;
-	(*dvr_init)(&priv->ini);
+	info = of_device_get_match_data(&pdev->dev);
+	if (!info)
+		return -ENOENT;
+
+	info->init_func(&priv->ini);
 
 	dev_dbg(dev, "Best mapping table is for %s\n",
 		priv->ini.family_name);
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index f310e15d94cb..591a15834b48 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -2298,6 +2298,7 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
 
 	if (total_num_lanes > MAX_NUM_LANES) {
 		dev_err(dev, "Invalid lane configuration\n");
+		ret = -EINVAL;
 		goto put_lnk_rst;
 	}
 
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index 4d1587d82286..ea127b177f46 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -82,18 +82,7 @@
 #define USBPCR1_PORT_RST			BIT(21)
 #define USBPCR1_WORD_IF_16BIT		BIT(19)
 
-enum ingenic_usb_phy_version {
-	ID_JZ4770,
-	ID_JZ4775,
-	ID_JZ4780,
-	ID_X1000,
-	ID_X1830,
-	ID_X2000,
-};
-
 struct ingenic_soc_info {
-	enum ingenic_usb_phy_version version;
-
 	void (*usb_phy_init)(struct phy *phy);
 };
 
@@ -300,38 +289,26 @@ static void x2000_usb_phy_init(struct phy *phy)
 }
 
 static const struct ingenic_soc_info jz4770_soc_info = {
-	.version = ID_JZ4770,
-
 	.usb_phy_init = jz4770_usb_phy_init,
 };
 
 static const struct ingenic_soc_info jz4775_soc_info = {
-	.version = ID_JZ4775,
-
 	.usb_phy_init = jz4775_usb_phy_init,
 };
 
 static const struct ingenic_soc_info jz4780_soc_info = {
-	.version = ID_JZ4780,
-
 	.usb_phy_init = jz4780_usb_phy_init,
 };
 
 static const struct ingenic_soc_info x1000_soc_info = {
-	.version = ID_X1000,
-
 	.usb_phy_init = x1000_usb_phy_init,
 };
 
 static const struct ingenic_soc_info x1830_soc_info = {
-	.version = ID_X1830,
-
 	.usb_phy_init = x1830_usb_phy_init,
 };
 
 static const struct ingenic_soc_info x2000_soc_info = {
-	.version = ID_X2000,
-
 	.usb_phy_init = x2000_usb_phy_init,
 };
 
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 18c481251f04..eeb357bfb0bb 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -234,7 +234,7 @@ static const struct of_device_id mtk_mipi_tx_match[] = {
 	{ },
 };
 
-struct platform_driver mtk_mipi_tx_driver = {
+static struct platform_driver mtk_mipi_tx_driver = {
 	.probe = mtk_mipi_tx_probe,
 	.remove = mtk_mipi_tx_remove,
 	.driver = {
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 4728e2bff662..6ee478bc5211 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -143,7 +143,7 @@ static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
 
 	error = iio_read_channel_processed(ddata->vbus, &value);
 	if (error >= 0)
-		return value > 3900 ? true : false;
+		return value > 3900;
 
 	dev_err(ddata->dev, "error reading VBUS: %i\n", error);
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 0939a9e9d448..9cdebe7f26cb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -212,6 +212,15 @@ static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x614,
 };
 
+static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x44,
+	[QPHY_PCS_STATUS]		= 0x14,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x1008,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x1014,
+};
+
 static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x00,
 	[QPHY_PCS_READY_STATUS]		= 0x160,
@@ -1974,6 +1983,291 @@ static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
 };
 
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+	/* Rate B */
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
+	QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
+	QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -2183,6 +2477,11 @@ static const char * const sdm845_ufs_phy_clk_l[] = {
 	"ref", "ref_aux",
 };
 
+/* usb3 phy on sdx55 doesn't have com_aux clock */
+static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
+	"aux", "cfg_ahb", "ref"
+};
+
 /* list of resets */
 static const char * const msm8996_pciephy_reset_l[] = {
 	"phy", "common", "cfg",
@@ -2824,6 +3123,117 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sdx55_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sdx55_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sm8250_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v4_usb3_uniphy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sm8350_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+	.tx_tbl			= sm8350_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+	.rx_tbl			= sm8350_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+	.pcs_tbl		= sm8350_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8150_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.is_dual_lane_phy	= true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= sm8150_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+	.tx_tbl			= sm8350_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_usb3_tx_tbl),
+	.rx_tbl			= sm8350_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_usb3_rx_tbl),
+	.pcs_tbl		= sm8350_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v4_usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+
+	.has_phy_dp_com_ctrl	= true,
+	.is_dual_lane_phy	= true,
+};
+
+static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sm8350_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sm8350_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sm8350_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+	.clk_list		= qmp_v4_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8350_usb3_uniphy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+};
+
 static void qcom_qmp_phy_configure_lane(void __iomem *base,
 					const unsigned int *regs,
 					const struct qmp_phy_init_tbl tbl[],
@@ -3135,7 +3545,7 @@ static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
 static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
-	const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+	static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
 	u8 val;
 
 	qphy->dp_aux_cfg++;
@@ -4129,6 +4539,12 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 		.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
 		/* It's a combo phy */
 	}, {
+		.compatible = "qcom,sc8180x-qmp-ufs-phy",
+		.data = &sm8150_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sc8180x-qmp-usb3-phy",
+		.data = &sm8150_usb3phy_cfg,
+	}, {
 		.compatible = "qcom,sdm845-qhp-pcie-phy",
 		.data = &sdm845_qhp_pciephy_cfg,
 	}, {
@@ -4171,8 +4587,20 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 		.compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
 		.data = &sm8250_qmp_gen3x2_pciephy_cfg,
 	}, {
+		.compatible = "qcom,sm8350-qmp-ufs-phy",
+		.data = &sm8350_ufsphy_cfg,
+	}, {
 		.compatible = "qcom,sm8250-qmp-modem-pcie-phy",
 		.data = &sm8250_qmp_gen3x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sdx55-qmp-usb3-uni-phy",
+		.data = &sdx55_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sm8350-qmp-usb3-phy",
+		.data = &sm8350_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
+		.data = &sm8350_usb3_uniphy_cfg,
 	},
 	{ },
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index db92a461dd2e..71ce3aa174ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -824,4 +824,151 @@
 #define QPHY_V4_PCS_PCIE_PRESET_P10_PRE			0xbc
 #define QPHY_V4_PCS_PCIE_PRESET_P10_POST		0xe0
 
+/* Only for QMP V5 PHY - QSERDES COM registers */
+#define QSERDES_V5_COM_PLL_IVCO				0x058
+#define QSERDES_V5_COM_CP_CTRL_MODE0			0x074
+#define QSERDES_V5_COM_CP_CTRL_MODE1			0x078
+#define QSERDES_V5_COM_PLL_RCTRL_MODE0			0x07c
+#define QSERDES_V5_COM_PLL_RCTRL_MODE1			0x080
+#define QSERDES_V5_COM_PLL_CCTRL_MODE0			0x084
+#define QSERDES_V5_COM_PLL_CCTRL_MODE1			0x088
+#define QSERDES_V5_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V5_COM_LOCK_CMP_EN			0x0a4
+#define QSERDES_V5_COM_LOCK_CMP1_MODE0			0x0ac
+#define QSERDES_V5_COM_LOCK_CMP2_MODE0			0x0b0
+#define QSERDES_V5_COM_LOCK_CMP1_MODE1			0x0b4
+#define QSERDES_V5_COM_DEC_START_MODE0			0x0bc
+#define QSERDES_V5_COM_LOCK_CMP2_MODE1			0x0b8
+#define QSERDES_V5_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V5_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V5_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V5_COM_HSCLK_SEL			0x158
+#define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4
+#define QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL		0x1bc
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
+
+/* Only for QMP V5 PHY - TX registers */
+#define QSERDES_V5_TX_RES_CODE_LANE_TX			0x34
+#define QSERDES_V5_TX_RES_CODE_LANE_RX			0x38
+#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX 		0x3c
+#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX 		0x40
+#define QSERDES_V5_TX_LANE_MODE_1			0x84
+#define QSERDES_V5_TX_LANE_MODE_2			0x88
+#define QSERDES_V5_TX_LANE_MODE_3			0x8c
+#define QSERDES_V5_TX_LANE_MODE_4			0x90
+#define QSERDES_V5_TX_LANE_MODE_5			0x94
+#define QSERDES_V5_TX_RCV_DETECT_LVL_2			0xa4
+#define QSERDES_V5_TX_TRAN_DRVR_EMP_EN			0xc0
+#define QSERDES_V5_TX_PI_QEC_CTRL			0xe4
+#define QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0x178
+#define QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0x17c
+#define QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0x180
+#define QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0x184
+
+/* Only for QMP V5 PHY - RX registers */
+#define QSERDES_V5_RX_UCDR_FO_GAIN			0x008
+#define QSERDES_V5_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH		0x040
+#define QSERDES_V5_RX_UCDR_PI_CONTROLS			0x044
+#define QSERDES_V5_RX_UCDR_PI_CTRL2			0x048
+#define QSERDES_V5_RX_UCDR_SB2_THRESH1			0x04c
+#define QSERDES_V5_RX_UCDR_SB2_THRESH2			0x050
+#define QSERDES_V5_RX_UCDR_SB2_GAIN1			0x054
+#define QSERDES_V5_RX_UCDR_SB2_GAIN2			0x058
+#define QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE		0x060
+#define QSERDES_V5_RX_RCLK_AUXDATA_SEL			0x064
+#define QSERDES_V5_RX_AC_JTAG_ENABLE			0x068
+#define QSERDES_V5_RX_AC_JTAG_MODE			0x078
+#define QSERDES_V5_RX_RX_TERM_BW			0x080
+#define QSERDES_V5_RX_VGA_CAL_CNTRL1			0x0d4
+#define QSERDES_V5_RX_VGA_CAL_CNTRL2			0x0d8
+#define QSERDES_V5_RX_GM_CAL				0x0dc
+#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1		0x0e8
+#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2		0x0ec
+#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3		0x0f0
+#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4		0x0f4
+#define QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW		0x0f8
+#define QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH		0x0fc
+#define QSERDES_V5_RX_RX_IDAC_MEASURE_TIME		0x100
+#define QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x110
+#define QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_V5_RX_SIGDET_ENABLES			0x118
+#define QSERDES_V5_RX_SIGDET_CNTRL			0x11c
+#define QSERDES_V5_RX_SIGDET_LVL			0x120
+#define QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL		0x124
+#define QSERDES_V5_RX_RX_BAND				0x128
+#define QSERDES_V5_RX_RX_MODE_00_LOW			0x15c
+#define QSERDES_V5_RX_RX_MODE_00_HIGH			0x160
+#define QSERDES_V5_RX_RX_MODE_00_HIGH2			0x164
+#define QSERDES_V5_RX_RX_MODE_00_HIGH3			0x168
+#define QSERDES_V5_RX_RX_MODE_00_HIGH4			0x16c
+#define QSERDES_V5_RX_RX_MODE_01_LOW			0x170
+#define QSERDES_V5_RX_RX_MODE_01_HIGH			0x174
+#define QSERDES_V5_RX_RX_MODE_01_HIGH2			0x178
+#define QSERDES_V5_RX_RX_MODE_01_HIGH3			0x17c
+#define QSERDES_V5_RX_RX_MODE_01_HIGH4			0x180
+#define QSERDES_V5_RX_RX_MODE_10_LOW			0x184
+#define QSERDES_V5_RX_RX_MODE_10_HIGH			0x188
+#define QSERDES_V5_RX_RX_MODE_10_HIGH2			0x18c
+#define QSERDES_V5_RX_RX_MODE_10_HIGH3			0x190
+#define QSERDES_V5_RX_RX_MODE_10_HIGH4			0x194
+#define QSERDES_V5_RX_DFE_EN_TIMER			0x1a0
+#define QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET		0x1a4
+#define QSERDES_V5_RX_DCC_CTRL1				0x1a8
+#define QSERDES_V5_RX_VTH_CODE				0x1b0
+
+/* Only for QMP V5 PHY - UFS PCS registers */
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
+#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
+#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1			0x154
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
+#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
+#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
+#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
+
+/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
+#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x300
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x304
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x308
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x30c
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x310
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x314
+#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x318
+#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART		0x31c
+#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL		0x320
+#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x324
+#define QPHY_V5_PCS_USB3_LFPS_CONFIG1			0x328
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x32c
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x330
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x334
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x338
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x33c
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x340
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x344
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x348
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY		0x34c
+#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x350
+#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL		0x354
+#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x358
+#define QPHY_V5_PCS_USB3_TEST_CONTROL			0x35c
+#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL		0x360
+
+/* Only for QMP V5 PHY - UNI has 0x1000 offset for PCS_USB3 regs */
+#define QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL	0x1018
+#define QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2	0x103c
+
 #endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 109792203baf..8f1bf7e2186b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -22,6 +22,7 @@
 
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 
+#define QUSB2PHY_PLL			0x0
 #define QUSB2PHY_PLL_TEST		0x04
 #define CLK_REF_SEL			BIT(7)
 
@@ -135,6 +136,35 @@ enum qusb2phy_reg_layout {
 	QUSB2PHY_INTR_CTRL,
 };
 
+static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
+};
+
+static const unsigned int ipq6018_regs_layout[] = {
+	[QUSB2PHY_PLL_STATUS]              = 0x38,
+	[QUSB2PHY_PORT_TUNE1]              = 0x80,
+	[QUSB2PHY_PORT_TUNE2]              = 0x84,
+	[QUSB2PHY_PORT_TUNE3]              = 0x88,
+	[QUSB2PHY_PORT_TUNE4]              = 0x8C,
+	[QUSB2PHY_PORT_TUNE5]              = 0x90,
+	[QUSB2PHY_PORT_TEST1]              = 0x98,
+	[QUSB2PHY_PORT_TEST2]              = 0x9C,
+	[QUSB2PHY_PORT_POWERDOWN]          = 0xB4,
+	[QUSB2PHY_INTR_CTRL]               = 0xBC,
+};
+
 static const unsigned int msm8996_regs_layout[] = {
 	[QUSB2PHY_PLL_STATUS]		= 0x38,
 	[QUSB2PHY_PORT_TUNE1]		= 0x80,
@@ -245,6 +275,9 @@ struct qusb2_phy_cfg {
 
 	/* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
 	bool has_pll_override;
+
+	/* true if PHY default clk scheme is single-ended */
+	bool se_clk_scheme_default;
 };
 
 static const struct qusb2_phy_cfg msm8996_phy_cfg = {
@@ -253,6 +286,7 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = {
 	.regs		= msm8996_regs_layout,
 
 	.has_pll_test	= true,
+	.se_clk_scheme_default = true,
 	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
 	.mask_core_ready = PLL_LOCKED,
 	.autoresume_en	 = BIT(3),
@@ -266,10 +300,22 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
 	.disable_ctrl   = POWER_DOWN,
 	.mask_core_ready = CORE_READY_STATUS,
 	.has_pll_override = true,
+	.se_clk_scheme_default = true,
 	.autoresume_en   = BIT(0),
 	.update_tune1_with_efuse = true,
 };
 
+static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
+	.tbl            = ipq6018_init_tbl,
+	.tbl_num        = ARRAY_SIZE(ipq6018_init_tbl),
+	.regs           = ipq6018_regs_layout,
+
+	.disable_ctrl   = POWER_DOWN,
+	.mask_core_ready = PLL_LOCKED,
+	/* autoresume not used */
+	.autoresume_en   = BIT(0),
+};
+
 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
 	.tbl		= qusb2_v2_init_tbl,
 	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
@@ -279,10 +325,23 @@ static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
 			   POWER_DOWN),
 	.mask_core_ready = CORE_READY_STATUS,
 	.has_pll_override = true,
+	.se_clk_scheme_default = true,
 	.autoresume_en	  = BIT(0),
 	.update_tune1_with_efuse = true,
 };
 
+static const struct qusb2_phy_cfg sdm660_phy_cfg = {
+	.tbl		= msm8996_init_tbl,
+	.tbl_num	= ARRAY_SIZE(msm8996_init_tbl),
+	.regs		= msm8996_regs_layout,
+
+	.has_pll_test	= true,
+	.se_clk_scheme_default = false,
+	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
+	.autoresume_en	 = BIT(3),
+};
+
 static const char * const qusb2_phy_vreg_names[] = {
 	"vdda-pll", "vdda-phy-dpdm",
 };
@@ -701,8 +760,13 @@ static int qusb2_phy_init(struct phy *phy)
 	/* Required to get phy pll lock successfully */
 	usleep_range(150, 160);
 
-	/* Default is single-ended clock on msm8996 */
-	qphy->has_se_clk_scheme = true;
+	/*
+	 * Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME
+	 * register in the TCSR so, if there's none, use the default
+	 * value hardcoded in the configuration.
+	 */
+	qphy->has_se_clk_scheme = cfg->se_clk_scheme_default;
+
 	/*
 	 * read TCSR_PHY_CLK_SCHEME register to check if single-ended
 	 * clock scheme is selected. If yes, then disable differential
@@ -810,6 +874,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
+		.compatible	= "qcom,ipq6018-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,ipq8074-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {
@@ -819,6 +886,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
 	}, {
+		.compatible	= "qcom,sdm660-qusb2-phy",
+		.data		= &sdm660_phy_cfg,
+	}, {
 		/*
 		 * Deprecated. Only here to support legacy device
 		 * trees that didn't include "qcom,qusb2-v2-phy"
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index a52a9bf13b75..8807e59a1162 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -401,13 +401,26 @@ static const struct hsphy_init_seq init_seq_femtophy[] = {
 	HSPHY_INIT_CFG(0x90, 0x60, 0),
 };
 
+static const struct hsphy_init_seq init_seq_mdm9607[] = {
+	HSPHY_INIT_CFG(0x80, 0x44, 0),
+	HSPHY_INIT_CFG(0x81, 0x38, 0),
+	HSPHY_INIT_CFG(0x82, 0x24, 0),
+	HSPHY_INIT_CFG(0x83, 0x13, 0),
+};
+
 static const struct hsphy_data hsphy_data_femtophy = {
 	.init_seq = init_seq_femtophy,
 	.init_seq_num = ARRAY_SIZE(init_seq_femtophy),
 };
 
+static const struct hsphy_data hsphy_data_mdm9607 = {
+	.init_seq = init_seq_mdm9607,
+	.init_seq_num = ARRAY_SIZE(init_seq_mdm9607),
+};
+
 static const struct of_device_id qcom_snps_hsphy_match[] = {
 	{ .compatible = "qcom,usb-hs-28nm-femtophy", .data = &hsphy_data_femtophy, },
+	{ .compatible = "qcom,usb-hs-28nm-mdm9607", .data = &hsphy_data_mdm9607, },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match);
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index a54317e96c41..d08fbb180e43 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -8,7 +8,7 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -17,6 +17,7 @@
 
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
+#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
 #define STM32_USBPHYC_VERSION	0x3F4
 
 /* STM32_USBPHYC_PLL bit fields */
@@ -32,19 +33,16 @@
 /* STM32_USBPHYC_MISC bit fields */
 #define SWITHOST		BIT(0)
 
+/* STM32_USBPHYC_MONITOR bit fields */
+#define STM32_USBPHYC_MON_OUT	GENMASK(3, 0)
+#define STM32_USBPHYC_MON_SEL	GENMASK(8, 4)
+#define STM32_USBPHYC_MON_SEL_LOCKP 0x1F
+#define STM32_USBPHYC_MON_OUT_LOCKP BIT(3)
+
 /* STM32_USBPHYC_VERSION bit fields */
 #define MINREV			GENMASK(3, 0)
 #define MAJREV			GENMASK(7, 4)
 
-static const char * const supplies_names[] = {
-	"vdda1v1",	/* 1V1 */
-	"vdda1v8",	/* 1V8 */
-};
-
-#define NUM_SUPPLIES		ARRAY_SIZE(supplies_names)
-
-#define PLL_LOCK_TIME_US	100
-#define PLL_PWR_DOWN_TIME_US	5
 #define PLL_FVCO_MHZ		2880
 #define PLL_INFF_MIN_RATE_HZ	19200000
 #define PLL_INFF_MAX_RATE_HZ	38400000
@@ -58,7 +56,6 @@ struct pll_params {
 struct stm32_usbphyc_phy {
 	struct phy *phy;
 	struct stm32_usbphyc *usbphyc;
-	struct regulator_bulk_data supplies[NUM_SUPPLIES];
 	u32 index;
 	bool active;
 };
@@ -70,6 +67,9 @@ struct stm32_usbphyc {
 	struct reset_control *rst;
 	struct stm32_usbphyc_phy **phys;
 	int nphys;
+	struct regulator *vdda1v1;
+	struct regulator *vdda1v8;
+	atomic_t n_pll_cons;
 	int switch_setup;
 };
 
@@ -83,6 +83,41 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
 	writel_relaxed(readl_relaxed(reg) & ~bits, reg);
 }
 
+static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc)
+{
+	int ret;
+
+	ret = regulator_enable(usbphyc->vdda1v1);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(usbphyc->vdda1v8);
+	if (ret)
+		goto vdda1v1_disable;
+
+	return 0;
+
+vdda1v1_disable:
+	regulator_disable(usbphyc->vdda1v1);
+
+	return ret;
+}
+
+static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc)
+{
+	int ret;
+
+	ret = regulator_disable(usbphyc->vdda1v8);
+	if (ret)
+		return ret;
+
+	ret = regulator_disable(usbphyc->vdda1v1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static void stm32_usbphyc_get_pll_params(u32 clk_rate,
 					 struct pll_params *pll_params)
 {
@@ -142,83 +177,106 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
 	return 0;
 }
 
-static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc)
+static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
 {
-	int i;
+	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
+	u32 pllen;
+
+	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
 
-	for (i = 0; i < usbphyc->nphys; i++)
-		if (usbphyc->phys[i]->active)
-			return true;
+	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
+	if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50))
+		dev_err(usbphyc->dev, "PLL not reset\n");
 
-	return false;
+	return stm32_usbphyc_regulators_disable(usbphyc);
+}
+
+static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
+{
+	/* Check if a phy port is still active or clk48 in use */
+	if (atomic_dec_return(&usbphyc->n_pll_cons) > 0)
+		return 0;
+
+	return __stm32_usbphyc_pll_disable(usbphyc);
 }
 
 static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
 {
 	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
-	bool pllen = (readl_relaxed(pll_reg) & PLLEN);
+	bool pllen = readl_relaxed(pll_reg) & PLLEN;
 	int ret;
 
-	/* Check if one phy port has already configured the pll */
-	if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc))
+	/*
+	 * Check if a phy port or clk48 prepare has configured the pll
+	 * and ensure the PLL is enabled
+	 */
+	if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen)
 		return 0;
 
 	if (pllen) {
-		stm32_usbphyc_clr_bits(pll_reg, PLLEN);
-		/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
-		udelay(PLL_PWR_DOWN_TIME_US);
+		/*
+		 * PLL shouldn't be enabled without known consumer,
+		 * disable it and reinit n_pll_cons
+		 */
+		dev_warn(usbphyc->dev, "PLL enabled without known consumers\n");
+
+		ret = __stm32_usbphyc_pll_disable(usbphyc);
+		if (ret)
+			return ret;
 	}
 
+	ret = stm32_usbphyc_regulators_enable(usbphyc);
+	if (ret)
+		goto dec_n_pll_cons;
+
 	ret = stm32_usbphyc_pll_init(usbphyc);
 	if (ret)
-		return ret;
+		goto reg_disable;
 
 	stm32_usbphyc_set_bits(pll_reg, PLLEN);
 
-	/* Wait for maximum lock time */
-	udelay(PLL_LOCK_TIME_US);
-
-	if (!(readl_relaxed(pll_reg) & PLLEN)) {
-		dev_err(usbphyc->dev, "PLLEN not set\n");
-		return -EIO;
-	}
-
 	return 0;
-}
-
-static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
-{
-	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
 
-	/* Check if other phy port active */
-	if (stm32_usbphyc_has_one_phy_active(usbphyc))
-		return 0;
-
-	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
-	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
-	udelay(PLL_PWR_DOWN_TIME_US);
+reg_disable:
+	stm32_usbphyc_regulators_disable(usbphyc);
 
-	if (readl_relaxed(pll_reg) & PLLEN) {
-		dev_err(usbphyc->dev, "PLL not reset\n");
-		return -EIO;
-	}
+dec_n_pll_cons:
+	atomic_dec(&usbphyc->n_pll_cons);
 
-	return 0;
+	return ret;
 }
 
 static int stm32_usbphyc_phy_init(struct phy *phy)
 {
 	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
 	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
+	u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index);
+	u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL,
+				STM32_USBPHYC_MON_SEL_LOCKP);
+	u32 monout;
 	int ret;
 
 	ret = stm32_usbphyc_pll_enable(usbphyc);
 	if (ret)
 		return ret;
 
+	/* Check that PLL Lock input to PHY is High */
+	writel_relaxed(monsel, usbphyc->base + reg_mon);
+	ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout,
+					 (monout & STM32_USBPHYC_MON_OUT_LOCKP),
+					 100, 1000);
+	if (ret) {
+		dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n",
+			(u32)(monout & STM32_USBPHYC_MON_OUT));
+		goto pll_disable;
+	}
+
 	usbphyc_phy->active = true;
 
 	return 0;
+
+pll_disable:
+	return stm32_usbphyc_pll_disable(usbphyc);
 }
 
 static int stm32_usbphyc_phy_exit(struct phy *phy)
@@ -231,25 +289,9 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
 	return stm32_usbphyc_pll_disable(usbphyc);
 }
 
-static int stm32_usbphyc_phy_power_on(struct phy *phy)
-{
-	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
-
-	return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies);
-}
-
-static int stm32_usbphyc_phy_power_off(struct phy *phy)
-{
-	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
-
-	return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies);
-}
-
 static const struct phy_ops stm32_usbphyc_phy_ops = {
 	.init = stm32_usbphyc_phy_init,
 	.exit = stm32_usbphyc_phy_exit,
-	.power_on = stm32_usbphyc_phy_power_on,
-	.power_off = stm32_usbphyc_phy_power_off,
 	.owner = THIS_MODULE,
 };
 
@@ -312,7 +354,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *child, *np = dev->of_node;
 	struct phy_provider *phy_provider;
-	u32 version;
+	u32 pllen, version;
 	int ret, port = 0;
 
 	usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
@@ -344,6 +386,19 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 		ret = PTR_ERR(usbphyc->rst);
 		if (ret == -EPROBE_DEFER)
 			goto clk_disable;
+
+		stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
+	}
+
+	/*
+	 * Wait for minimum width of powerdown pulse (ENABLE = Low):
+	 * we have to ensure the PLL is disabled before phys initialization.
+	 */
+	if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL,
+				       pllen, !(pllen & PLLEN), 5, 50)) {
+		dev_warn(usbphyc->dev, "PLL not reset\n");
+		ret = -EPROBE_DEFER;
+		goto clk_disable;
 	}
 
 	usbphyc->switch_setup = -EINVAL;
@@ -355,11 +410,26 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
+	usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1");
+	if (IS_ERR(usbphyc->vdda1v1)) {
+		ret = PTR_ERR(usbphyc->vdda1v1);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret);
+		goto clk_disable;
+	}
+
+	usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8");
+	if (IS_ERR(usbphyc->vdda1v8)) {
+		ret = PTR_ERR(usbphyc->vdda1v8);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret);
+		goto clk_disable;
+	}
+
 	for_each_child_of_node(np, child) {
 		struct stm32_usbphyc_phy *usbphyc_phy;
 		struct phy *phy;
 		u32 index;
-		int i;
 
 		phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
 		if (IS_ERR(phy)) {
@@ -377,18 +447,6 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 			goto put_child;
 		}
 
-		for (i = 0; i < NUM_SUPPLIES; i++)
-			usbphyc_phy->supplies[i].supply = supplies_names[i];
-
-		ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES,
-					      usbphyc_phy->supplies);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(&phy->dev,
-					"failed to get regulators: %d\n", ret);
-			goto put_child;
-		}
-
 		ret = of_property_read_u32(child, "reg", &index);
 		if (ret || index > usbphyc->nphys) {
 			dev_err(&phy->dev, "invalid reg property: %d\n", ret);
@@ -432,6 +490,12 @@ clk_disable:
 static int stm32_usbphyc_remove(struct platform_device *pdev)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
+	int port;
+
+	/* Ensure PHYs are not active, to allow PLL disabling */
+	for (port = 0; port < usbphyc->nphys; port++)
+		if (usbphyc->phys[port]->active)
+			stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy);
 
 	clk_disable_unprepare(usbphyc->clk);
 
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 2b0f921b6ee3..2b65f84a5f89 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -874,13 +874,10 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
 
 		snprintf(name, sizeof(name), "ref%u", refclk);
 		clk = devm_clk_get_optional(gtr_dev->dev, name);
-		if (IS_ERR(clk)) {
-			if (PTR_ERR(clk) != -EPROBE_DEFER)
-				dev_err(gtr_dev->dev,
-					"Failed to get reference clock %u: %ld\n",
-					refclk, PTR_ERR(clk));
-			return PTR_ERR(clk);
-		}
+		if (IS_ERR(clk))
+			return dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
+					     "Failed to get reference clock %u\n",
+					     refclk);
 
 		if (!clk)
 			continue;
author	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2021-02-09 09:32:35 +0100
committer	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2021-02-09 09:32:35 +0100
commit	47ddb856c20fe07e6caf8e43cc8bd6c2077342d4 (patch)
tree	49987d214b5251f681c9dbf35ab6d248bc064daa
parent	f3be861362665acaaa6c271066e0aaced423a7c3 (diff)
parent	d68f2cb095979dff1c99e7803c7730ec2b53fc83 (diff)