diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-11-25 18:22:42 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-11-25 18:22:42 -0800 |
| commit | 090472ed9c922e699dc61dd601a9b376a64f4390 (patch) | |
| tree | 3d036be4700e67629c5a1e01ca78157d5dcce32f | |
| parent | b46ae77f67874918c540feb1e37a63308b2c9290 (diff) | |
| parent | cb9a830e871779b4f9b8d5f76a2abf24915cd007 (diff) | |
Merge tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
29 files changed, 175 insertions, 2245 deletions
diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index ff3a1707ef57..6d4cfd943f58 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -36,7 +36,11 @@ properties: vdd-supply: description: - VDD power supply to the hub + 3V3 power supply to the hub + + vdd2-supply: + description: + 1V2 power supply to the hub peer-hub: $ref: /schemas/types.yaml#/definitions/phandle @@ -62,6 +66,7 @@ allOf: properties: reset-gpios: false vdd-supply: false + vdd2-supply: false peer-hub: false i2c-bus: false else: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e889158ca205..915c8205623b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -521,8 +521,8 @@ examples: interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 692dd60e3f73..45a19d4928af 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -41,7 +41,7 @@ examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb"; + phy-names = "usb2", "usb3"; #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 787354b849c7..4cef568231bf 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -87,7 +87,6 @@ source "drivers/phy/motorola/Kconfig" source "drivers/phy/mscc/Kconfig" source "drivers/phy/qualcomm/Kconfig" source "drivers/phy/ralink/Kconfig" -source "drivers/phy/realtek/Kconfig" source "drivers/phy/renesas/Kconfig" source "drivers/phy/rockchip/Kconfig" source "drivers/phy/samsung/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 868a220ed0f6..fb3dc9de6111 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -26,7 +26,6 @@ obj-y += allwinner/ \ mscc/ \ qualcomm/ \ ralink/ \ - realtek/ \ renesas/ \ rockchip/ \ samsung/ \ diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig deleted file mode 100644 index 75ac7e7c31ae..000000000000 --- a/drivers/phy/realtek/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Phy drivers for Realtek platforms -# - -if ARCH_REALTEK || COMPILE_TEST - -config PHY_RTK_RTD_USB2PHY - tristate "Realtek RTD USB2 PHY Transceiver Driver" - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select USB_COMMON - help - Enable this to support Realtek SoC USB2 phy transceiver. - The DHC (digital home center) RTD series SoCs used the Synopsys - DWC3 USB IP. This driver will do the PHY initialization - of the parameters. - -config PHY_RTK_RTD_USB3PHY - tristate "Realtek RTD USB3 PHY Transceiver Driver" - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select USB_COMMON - help - Enable this to support Realtek SoC USB3 phy transceiver. - The DHC (digital home center) RTD series SoCs used the Synopsys - DWC3 USB IP. This driver will do the PHY initialization - of the parameters. - -endif # ARCH_REALTEK || COMPILE_TEST diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile deleted file mode 100644 index ed7b47ff8a26..000000000000 --- a/drivers/phy/realtek/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o -obj-$(CONFIG_PHY_RTK_RTD_USB3PHY) += phy-rtk-usb3.o diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c deleted file mode 100644 index 0a6426285c67..000000000000 --- a/drivers/phy/realtek/phy-rtk-usb2.c +++ /dev/null @@ -1,1325 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * phy-rtk-usb2.c RTK usb2.0 PHY driver - * - * Copyright (C) 2023 Realtek Semiconductor Corporation - * - */ - -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/uaccess.h> -#include <linux/debugfs.h> -#include <linux/nvmem-consumer.h> -#include <linux/regmap.h> -#include <linux/sys_soc.h> -#include <linux/mfd/syscon.h> -#include <linux/phy/phy.h> -#include <linux/usb.h> -#include <linux/usb/phy.h> -#include <linux/usb/hcd.h> - -/* GUSB2PHYACCn register */ -#define PHY_NEW_REG_REQ BIT(25) -#define PHY_VSTS_BUSY BIT(23) -#define PHY_VCTRL_SHIFT 8 -#define PHY_REG_DATA_MASK 0xff - -#define GET_LOW_NIBBLE(addr) ((addr) & 0x0f) -#define GET_HIGH_NIBBLE(addr) (((addr) & 0xf0) >> 4) - -#define EFUS_USB_DC_CAL_RATE 2 -#define EFUS_USB_DC_CAL_MAX 7 - -#define EFUS_USB_DC_DIS_RATE 1 -#define EFUS_USB_DC_DIS_MAX 7 - -#define MAX_PHY_DATA_SIZE 20 -#define OFFEST_PHY_READ 0x20 - -#define MAX_USB_PHY_NUM 4 -#define MAX_USB_PHY_PAGE0_DATA_SIZE 16 -#define MAX_USB_PHY_PAGE1_DATA_SIZE 16 -#define MAX_USB_PHY_PAGE2_DATA_SIZE 8 - -#define SET_PAGE_OFFSET 0xf4 -#define SET_PAGE_0 0x9b -#define SET_PAGE_1 0xbb -#define SET_PAGE_2 0xdb - -#define PAGE_START 0xe0 -#define PAGE0_0XE4 0xe4 -#define PAGE0_0XE6 0xe6 -#define PAGE0_0XE7 0xe7 -#define PAGE1_0XE0 0xe0 -#define PAGE1_0XE2 0xe2 - -#define SENSITIVITY_CTRL (BIT(4) | BIT(5) | BIT(6)) -#define ENABLE_AUTO_SENSITIVITY_CALIBRATION BIT(2) -#define DEFAULT_DC_DRIVING_VALUE (0x8) -#define DEFAULT_DC_DISCONNECTION_VALUE (0x6) -#define HS_CLK_SELECT BIT(6) - -struct phy_reg { - void __iomem *reg_wrap_vstatus; - void __iomem *reg_gusb2phyacc0; - int vstatus_index; -}; - -struct phy_data { - u8 addr; - u8 data; -}; - -struct phy_cfg { - int page0_size; - struct phy_data page0[MAX_USB_PHY_PAGE0_DATA_SIZE]; - int page1_size; - struct phy_data page1[MAX_USB_PHY_PAGE1_DATA_SIZE]; - int page2_size; - struct phy_data page2[MAX_USB_PHY_PAGE2_DATA_SIZE]; - - int num_phy; - - bool check_efuse; - int check_efuse_version; -#define CHECK_EFUSE_V1 1 -#define CHECK_EFUSE_V2 2 - int efuse_dc_driving_rate; - int efuse_dc_disconnect_rate; - int dc_driving_mask; - int dc_disconnect_mask; - bool usb_dc_disconnect_at_page0; - int driving_updated_for_dev_dis; - - bool do_toggle; - bool do_toggle_driving; - bool use_default_parameter; - bool is_double_sensitivity_mode; -}; - -struct phy_parameter { - struct phy_reg phy_reg; - - /* Get from efuse */ - s8 efuse_usb_dc_cal; - s8 efuse_usb_dc_dis; - - /* Get from dts */ - bool inverse_hstx_sync_clock; - u32 driving_level; - s32 driving_level_compensate; - s32 disconnection_compensate; -}; - -struct rtk_phy { - struct usb_phy phy; - struct device *dev; - - struct phy_cfg *phy_cfg; - int num_phy; - struct phy_parameter *phy_parameter; - - struct dentry *debug_dir; -}; - -/* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */ -static inline int page_addr_to_array_index(u8 addr) -{ - return (int)((((addr) - PAGE_START) & 0x7) + - ((((addr) - PAGE_START) & 0x10) >> 1)); -} - -static inline u8 array_index_to_page_addr(int index) -{ - return ((((index) + PAGE_START) & 0x7) + - ((((index) & 0x8) << 1) + PAGE_START)); -} - -#define PHY_IO_TIMEOUT_USEC (50000) -#define PHY_IO_DELAY_US (100) - -static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - int ret; - unsigned int val; - - ret = read_poll_timeout(readl, val, ((val & mask) == result), - PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); - if (ret) { - pr_err("%s can't program USB phy\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -static char rtk_phy_read(struct phy_reg *phy_reg, char addr) -{ - void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; - unsigned int val; - int ret = 0; - - addr -= OFFEST_PHY_READ; - - /* polling until VBusy == 0 */ - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - /* VCtrl = low nibble of addr, and set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - /* VCtrl = high nibble of addr, and set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - val = readl(reg_gusb2phyacc0); - - return (char)(val & PHY_REG_DATA_MASK); -} - -static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data) -{ - unsigned int val; - void __iomem *reg_wrap_vstatus = phy_reg->reg_wrap_vstatus; - void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; - int shift_bits = phy_reg->vstatus_index * 8; - int ret = 0; - - /* write data to VStatusOut2 (data output to phy) */ - writel((u32)data << shift_bits, reg_wrap_vstatus); - - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - /* VCtrl = low nibble of addr, set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); - - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - /* VCtrl = high nibble of addr, set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); - - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - return 0; -} - -static int rtk_phy_set_page(struct phy_reg *phy_reg, int page) -{ - switch (page) { - case 0: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_0); - case 1: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_1); - case 2: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_2); - default: - pr_err("%s error page=%d\n", __func__, page); - } - - return -EINVAL; -} - -static u8 __updated_dc_disconnect_level_page0_0xe4(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - u8 ret; - s32 val; - s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - int offset = 4; - - val = (s32)((data >> offset) & dc_disconnect_mask) - + phy_parameter->efuse_usb_dc_dis - + phy_parameter->disconnection_compensate; - - if (val > dc_disconnect_mask) - val = dc_disconnect_mask; - else if (val < 0) - val = 0; - - ret = (data & (~(dc_disconnect_mask << offset))) | - (val & dc_disconnect_mask) << offset; - - return ret; -} - -/* updated disconnect level at page0 */ -static void update_dc_disconnect_level_at_page0(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - struct phy_data *phy_data; - u8 addr, data; - int offset = 4; - s32 dc_disconnect_mask; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - i = page_addr_to_array_index(PAGE0_0XE4); - phy_data = phy_data_page + i; - if (!phy_data->addr) { - phy_data->addr = PAGE0_0XE4; - phy_data->data = rtk_phy_read(phy_reg, PAGE0_0XE4); - } - - addr = phy_data->addr; - data = phy_data->data; - dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (update) - data = __updated_dc_disconnect_level_page0_0xe4(phy_cfg, phy_parameter, data); - else - data = (data & ~(dc_disconnect_mask << offset)) | - (DEFAULT_DC_DISCONNECTION_VALUE << offset); - - if (rtk_phy_write(phy_reg, addr, data)) - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); -} - -static u8 __updated_dc_disconnect_level_page1_0xe2(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - u8 ret; - s32 val; - s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - val = (s32)(data & dc_disconnect_mask) - + phy_parameter->efuse_usb_dc_dis - + phy_parameter->disconnection_compensate; - } else { /* for CHECK_EFUSE_V2 or no efuse */ - if (phy_parameter->efuse_usb_dc_dis) - val = (s32)(phy_parameter->efuse_usb_dc_dis + - phy_parameter->disconnection_compensate); - else - val = (s32)((data & dc_disconnect_mask) + - phy_parameter->disconnection_compensate); - } - - if (val > dc_disconnect_mask) - val = dc_disconnect_mask; - else if (val < 0) - val = 0; - - ret = (data & (~dc_disconnect_mask)) | (val & dc_disconnect_mask); - - return ret; -} - -/* updated disconnect level at page1 */ -static void update_dc_disconnect_level_at_page1(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg; - struct phy_data *phy_data_page; - struct phy_data *phy_data; - struct phy_reg *phy_reg; - u8 addr, data; - s32 dc_disconnect_mask; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - i = page_addr_to_array_index(PAGE1_0XE2); - phy_data = phy_data_page + i; - if (!phy_data->addr) { - phy_data->addr = PAGE1_0XE2; - phy_data->data = rtk_phy_read(phy_reg, PAGE1_0XE2); - } - - addr = phy_data->addr; - data = phy_data->data; - dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (update) - data = __updated_dc_disconnect_level_page1_0xe2(phy_cfg, phy_parameter, data); - else - data = (data & ~dc_disconnect_mask) | DEFAULT_DC_DISCONNECTION_VALUE; - - if (rtk_phy_write(phy_reg, addr, data)) - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); -} - -static void update_dc_disconnect_level(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - - if (phy_cfg->usb_dc_disconnect_at_page0) - update_dc_disconnect_level_at_page0(rtk_phy, phy_parameter, update); - else - update_dc_disconnect_level_at_page1(rtk_phy, phy_parameter, update); -} - -static u8 __update_dc_driving_page0_0xe4(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - s32 driving_level_compensate = phy_parameter->driving_level_compensate; - s32 dc_driving_mask = phy_cfg->dc_driving_mask; - s32 val; - u8 ret; - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - val = (s32)(data & dc_driving_mask) + driving_level_compensate - + phy_parameter->efuse_usb_dc_cal; - } else { /* for CHECK_EFUSE_V2 or no efuse */ - if (phy_parameter->efuse_usb_dc_cal) - val = (s32)((phy_parameter->efuse_usb_dc_cal & dc_driving_mask) - + driving_level_compensate); - else - val = (s32)(data & dc_driving_mask); - } - - if (val > dc_driving_mask) - val = dc_driving_mask; - else if (val < 0) - val = 0; - - ret = (data & (~dc_driving_mask)) | (val & dc_driving_mask); - - return ret; -} - -static void update_dc_driving_level(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_reg = &phy_parameter->phy_reg; - phy_cfg = rtk_phy->phy_cfg; - if (!phy_cfg->page0[4].addr) { - rtk_phy_set_page(phy_reg, 0); - phy_cfg->page0[4].addr = PAGE0_0XE4; - phy_cfg->page0[4].data = rtk_phy_read(phy_reg, PAGE0_0XE4); - } - - if (phy_parameter->driving_level != DEFAULT_DC_DRIVING_VALUE) { - u32 dc_driving_mask; - u8 driving_level; - u8 data; - - data = phy_cfg->page0[4].data; - dc_driving_mask = phy_cfg->dc_driving_mask; - driving_level = data & dc_driving_mask; - - dev_dbg(rtk_phy->dev, "%s driving_level=%d => dts driving_level=%d\n", - __func__, driving_level, phy_parameter->driving_level); - - phy_cfg->page0[4].data = (data & (~dc_driving_mask)) | - (phy_parameter->driving_level & dc_driving_mask); - } - - phy_cfg->page0[4].data = __update_dc_driving_page0_0xe4(phy_cfg, - phy_parameter, - phy_cfg->page0[4].data); -} - -static void update_hs_clk_select(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - if (phy_parameter->inverse_hstx_sync_clock) { - if (!phy_cfg->page0[6].addr) { - rtk_phy_set_page(phy_reg, 0); - phy_cfg->page0[6].addr = PAGE0_0XE6; - phy_cfg->page0[6].data = rtk_phy_read(phy_reg, PAGE0_0XE6); - } - - phy_cfg->page0[6].data = phy_cfg->page0[6].data | HS_CLK_SELECT; - } -} - -static void do_rtk_phy_toggle(struct rtk_phy *rtk_phy, - int index, bool connect) -{ - struct phy_parameter *phy_parameter; - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - u8 addr, data; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (!phy_cfg->do_toggle) - goto out; - - if (phy_cfg->is_double_sensitivity_mode) - goto do_toggle_driving; - - /* Set page 0 */ - rtk_phy_set_page(phy_reg, 0); - - addr = PAGE0_0XE7; - data = rtk_phy_read(phy_reg, addr); - - if (connect) - rtk_phy_write(phy_reg, addr, data & (~SENSITIVITY_CTRL)); - else - rtk_phy_write(phy_reg, addr, data | (SENSITIVITY_CTRL)); - -do_toggle_driving: - - if (!phy_cfg->do_toggle_driving) - goto do_toggle; - - /* Page 0 addr 0xE4 driving capability */ - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - i = page_addr_to_array_index(PAGE0_0XE4); - addr = phy_data_page[i].addr; - data = phy_data_page[i].data; - - if (connect) { - rtk_phy_write(phy_reg, addr, data); - } else { - u8 value; - s32 tmp; - s32 driving_updated = - phy_cfg->driving_updated_for_dev_dis; - s32 dc_driving_mask = phy_cfg->dc_driving_mask; - - tmp = (s32)(data & dc_driving_mask) + driving_updated; - - if (tmp > dc_driving_mask) - tmp = dc_driving_mask; - else if (tmp < 0) - tmp = 0; - - value = (data & (~dc_driving_mask)) | (tmp & dc_driving_mask); - - rtk_phy_write(phy_reg, addr, value); - } - -do_toggle: - /* restore dc disconnect level before toggle */ - update_dc_disconnect_level(rtk_phy, phy_parameter, false); - - /* Set page 1 */ - rtk_phy_set_page(phy_reg, 1); - - addr = PAGE1_0XE0; - data = rtk_phy_read(phy_reg, addr); - - rtk_phy_write(phy_reg, addr, data & - (~ENABLE_AUTO_SENSITIVITY_CALIBRATION)); - mdelay(1); - rtk_phy_write(phy_reg, addr, data | - (ENABLE_AUTO_SENSITIVITY_CALIBRATION)); - - /* update dc disconnect level after toggle */ - update_dc_disconnect_level(rtk_phy, phy_parameter, true); - -out: - return; -} - -static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) -{ - struct phy_parameter *phy_parameter; - struct phy_cfg *phy_cfg; - struct phy_data *phy_data_page; - struct phy_reg *phy_reg; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (phy_cfg->use_default_parameter) { - dev_dbg(rtk_phy->dev, "%s phy#%d use default parameter\n", - __func__, index); - goto do_toggle; - } - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - for (i = 0; i < phy_cfg->page0_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page0 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - for (i = 0; i < phy_cfg->page1_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - - if (phy_cfg->page2_size == 0) - goto do_toggle; - - /* Set page 2 */ - phy_data_page = phy_cfg->page2; - rtk_phy_set_page(phy_reg, 2); - - for (i = 0; i < phy_cfg->page2_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page2 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - -do_toggle: - do_rtk_phy_toggle(rtk_phy, index, false); - - return 0; -} - -static int rtk_phy_init(struct phy *phy) -{ - struct rtk_phy *rtk_phy = phy_get_drvdata(phy); - unsigned long phy_init_time = jiffies; - int i, ret = 0; - - if (!rtk_phy) - return -EINVAL; - - for (i = 0; i < rtk_phy->num_phy; i++) - ret = do_rtk_phy_init(rtk_phy, i); - - dev_dbg(rtk_phy->dev, "Initialized RTK USB 2.0 PHY (take %dms)\n", - jiffies_to_msecs(jiffies - phy_init_time)); - return ret; -} - -static int rtk_phy_exit(struct phy *phy) -{ - return 0; -} - -static const struct phy_ops ops = { - .init = rtk_phy_init, - .exit = rtk_phy_exit, - .owner = THIS_MODULE, -}; - -static void rtk_phy_toggle(struct usb_phy *usb2_phy, bool connect, int port) -{ - int index = port; - struct rtk_phy *rtk_phy = NULL; - - rtk_phy = dev_get_drvdata(usb2_phy->dev); - - if (index > rtk_phy->num_phy) { - dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", - __func__, index, rtk_phy->num_phy); - return; - } - - do_rtk_phy_toggle(rtk_phy, index, connect); -} - -static int rtk_phy_notify_port_status(struct usb_phy *x, int port, - u16 portstatus, u16 portchange) -{ - bool connect = false; - - pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n", - __func__, port, (int)portstatus, (int)portchange); - if (portstatus & USB_PORT_STAT_CONNECTION) - connect = true; - - if (portchange & USB_PORT_STAT_C_CONNECTION) - rtk_phy_toggle(x, connect, port); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static struct dentry *create_phy_debug_root(void) -{ - struct dentry *phy_debug_root; - - phy_debug_root = debugfs_lookup("phy", usb_debug_root); - if (!phy_debug_root) - phy_debug_root = debugfs_create_dir("phy", usb_debug_root); - - return phy_debug_root; -} - -static int rtk_usb2_parameter_show(struct seq_file *s, void *unused) -{ - struct rtk_phy *rtk_phy = s->private; - struct phy_cfg *phy_cfg; - int i, index; - - phy_cfg = rtk_phy->phy_cfg; - - seq_puts(s, "Property:\n"); - seq_printf(s, " check_efuse: %s\n", - phy_cfg->check_efuse ? "Enable" : "Disable"); - seq_printf(s, " check_efuse_version: %d\n", - phy_cfg->check_efuse_version); - seq_printf(s, " efuse_dc_driving_rate: %d\n", - phy_cfg->efuse_dc_driving_rate); - seq_printf(s, " dc_driving_mask: 0x%x\n", - phy_cfg->dc_driving_mask); - seq_printf(s, " efuse_dc_disconnect_rate: %d\n", - phy_cfg->efuse_dc_disconnect_rate); - seq_printf(s, " dc_disconnect_mask: 0x%x\n", - phy_cfg->dc_disconnect_mask); - seq_printf(s, " usb_dc_disconnect_at_page0: %s\n", - phy_cfg->usb_dc_disconnect_at_page0 ? "true" : "false"); - seq_printf(s, " do_toggle: %s\n", - phy_cfg->do_toggle ? "Enable" : "Disable"); - seq_printf(s, " do_toggle_driving: %s\n", - phy_cfg->do_toggle_driving ? "Enable" : "Disable"); - seq_printf(s, " driving_updated_for_dev_dis: 0x%x\n", - phy_cfg->driving_updated_for_dev_dis); - seq_printf(s, " use_default_parameter: %s\n", - phy_cfg->use_default_parameter ? "Enable" : "Disable"); - seq_printf(s, " is_double_sensitivity_mode: %s\n", - phy_cfg->is_double_sensitivity_mode ? "Enable" : "Disable"); - - for (index = 0; index < rtk_phy->num_phy; index++) { - struct phy_parameter *phy_parameter; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - seq_printf(s, "PHY %d:\n", index); - - seq_puts(s, "Page 0:\n"); - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - for (i = 0; i < phy_cfg->page0_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 0: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 0: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - - seq_puts(s, "Page 1:\n"); - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - for (i = 0; i < phy_cfg->page1_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 1: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 1: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - - if (phy_cfg->page2_size == 0) - goto out; - - seq_puts(s, "Page 2:\n"); - /* Set page 2 */ - phy_data_page = phy_cfg->page2; - rtk_phy_set_page(phy_reg, 2); - - for (i = 0; i < phy_cfg->page2_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 2: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 2: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - -out: - seq_puts(s, "PHY Property:\n"); - seq_printf(s, " efuse_usb_dc_cal: %d\n", - (int)phy_parameter->efuse_usb_dc_cal); - seq_printf(s, " efuse_usb_dc_dis: %d\n", - (int)phy_parameter->efuse_usb_dc_dis); - seq_printf(s, " inverse_hstx_sync_clock: %s\n", - phy_parameter->inverse_hstx_sync_clock ? "Enable" : "Disable"); - seq_printf(s, " driving_level: %d\n", - phy_parameter->driving_level); - seq_printf(s, " driving_level_compensate: %d\n", - phy_parameter->driving_level_compensate); - seq_printf(s, " disconnection_compensate: %d\n", - phy_parameter->disconnection_compensate); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(rtk_usb2_parameter); - -static inline void create_debug_files(struct rtk_phy *rtk_phy) -{ - struct dentry *phy_debug_root = NULL; - - phy_debug_root = create_phy_debug_root(); - if (!phy_debug_root) - return; - - rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), - phy_debug_root); - - debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb2_parameter_fops); - - return; -} - -static inline void remove_debug_files(struct rtk_phy *rtk_phy) -{ - debugfs_remove_recursive(rtk_phy->debug_dir); -} -#else -static inline void create_debug_files(struct rtk_phy *rtk_phy) { } -static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } -#endif /* CONFIG_DEBUG_FS */ - -static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, int index) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - u8 value = 0; - struct nvmem_cell *cell; - struct soc_device_attribute rtk_soc_groot[] = { - { .family = "Realtek Groot",}, - { /* empty */ } }; - - if (!phy_cfg->check_efuse) - goto out; - - /* Read efuse for usb dc cal */ - cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-cal"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb-dc-cal: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & phy_cfg->dc_driving_mask; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - int rate = phy_cfg->efuse_dc_driving_rate; - - if (value <= EFUS_USB_DC_CAL_MAX) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value * rate); - else - phy_parameter->efuse_usb_dc_cal = -(int8_t) - ((EFUS_USB_DC_CAL_MAX & value) * rate); - - if (soc_device_match(rtk_soc_groot)) { - dev_dbg(rtk_phy->dev, "For groot IC we need a workaround to adjust efuse_usb_dc_cal\n"); - - /* We don't multiple dc_cal_rate=2 for positive dc cal compensate */ - if (value <= EFUS_USB_DC_CAL_MAX) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value); - - /* We set max dc cal compensate is 0x8 if otp is 0x7 */ - if (value == 0x7) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value + 1); - } - } else { /* for CHECK_EFUSE_V2 */ - phy_parameter->efuse_usb_dc_cal = value & phy_cfg->dc_driving_mask; - } - - /* Read efuse for usb dc disconnect level */ - value = 0; - cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-dis"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb-dc-dis: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & phy_cfg->dc_disconnect_mask; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - int rate = phy_cfg->efuse_dc_disconnect_rate; - - if (value <= EFUS_USB_DC_DIS_MAX) - phy_parameter->efuse_usb_dc_dis = (int8_t)(value * rate); - else - phy_parameter->efuse_usb_dc_dis = -(int8_t) - ((EFUS_USB_DC_DIS_MAX & value) * rate); - } else { /* for CHECK_EFUSE_V2 */ - phy_parameter->efuse_usb_dc_dis = value & phy_cfg->dc_disconnect_mask; - } - -out: - return 0; -} - -static int parse_phy_data(struct rtk_phy *rtk_phy) -{ - struct device *dev = rtk_phy->dev; - struct device_node *np = dev->of_node; - struct phy_parameter *phy_parameter; - int ret = 0; - int index; - - rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * - rtk_phy->num_phy, GFP_KERNEL); - if (!rtk_phy->phy_parameter) - return -ENOMEM; - - for (index = 0; index < rtk_phy->num_phy; index++) { - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - - phy_parameter->phy_reg.reg_wrap_vstatus = of_iomap(np, 0); - phy_parameter->phy_reg.reg_gusb2phyacc0 = of_iomap(np, 1) + index; - phy_parameter->phy_reg.vstatus_index = index; - - if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock")) - phy_parameter->inverse_hstx_sync_clock = true; - else - phy_parameter->inverse_hstx_sync_clock = false; - - if (of_property_read_u32_index(np, "realtek,driving-level", - index, &phy_parameter->driving_level)) - phy_parameter->driving_level = DEFAULT_DC_DRIVING_VALUE; - - if (of_property_read_u32_index(np, "realtek,driving-level-compensate", - index, &phy_parameter->driving_level_compensate)) - phy_parameter->driving_level_compensate = 0; - - if (of_property_read_u32_index(np, "realtek,disconnection-compensate", - index, &phy_parameter->disconnection_compensate)) - phy_parameter->disconnection_compensate = 0; - - get_phy_data_by_efuse(rtk_phy, phy_parameter, index); - - update_dc_driving_level(rtk_phy, phy_parameter); - - update_hs_clk_select(rtk_phy, phy_parameter); - } - - return ret; -} - -static int rtk_usb2phy_probe(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy; - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct phy_provider *phy_provider; - const struct phy_cfg *phy_cfg; - int ret = 0; - - phy_cfg = of_device_get_match_data(dev); - if (!phy_cfg) { - dev_err(dev, "phy config are not assigned!\n"); - return -EINVAL; - } - - rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); - if (!rtk_phy) - return -ENOMEM; - - rtk_phy->dev = &pdev->dev; - rtk_phy->phy.dev = rtk_phy->dev; - rtk_phy->phy.label = "rtk-usb2phy"; - rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status; - - rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); - - memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); - - rtk_phy->num_phy = phy_cfg->num_phy; - - ret = parse_phy_data(rtk_phy); - if (ret) - goto err; - - platform_set_drvdata(pdev, rtk_phy); - - generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); - if (IS_ERR(generic_phy)) - return PTR_ERR(generic_phy); - - phy_set_drvdata(generic_phy, rtk_phy); - - phy_provider = devm_of_phy_provider_register(rtk_phy->dev, - of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - ret = usb_add_phy_dev(&rtk_phy->phy); - if (ret) - goto err; - - create_debug_files(rtk_phy); - -err: - return ret; -} - -static void rtk_usb2phy_remove(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); - - remove_debug_files(rtk_phy); - - usb_remove_phy(&rtk_phy->phy); -} - -static const struct phy_cfg rtd1295_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x90}, - [3] = {0xe3, 0x3a}, - [4] = {0xe4, 0x68}, - [6] = {0xe6, 0x91}, - [13] = {0xf5, 0x81}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1395_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0xac}, - [13] = {0xf5, 0x00}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1395_phy_cfg_2port = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0xac}, - [13] = {0xf5, 0x00}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 2, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1619_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0x68}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1319_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x18}, - [4] = {0xe4, 0x6a}, - [7] = {0xe7, 0x71}, - [13] = {0xf5, 0x15}, - [15] = {0xf7, 0x32}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x44}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [0] = {0xe0, 0x01}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1312c_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x14}, - [4] = {0xe4, 0x67}, - [5] = {0xe5, 0x55}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x23}, - [6] = {0xe6, 0x58}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { /* default parameter */ }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1619b_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x88}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x64}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x45}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1319d_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x8e}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, - .page1 = { [14] = {0xf5, 0x1}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x44}, }, - .check_efuse = true, - .num_phy = 1, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1315e_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x8c}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, - .page1 = { [3] = {0xe3, 0x7f}, - [14] = {0xf5, 0x01}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x44}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V2, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct of_device_id usbphy_rtk_dt_match[] = { - { .compatible = "realtek,rtd1295-usb2phy", .data = &rtd1295_phy_cfg }, - { .compatible = "realtek,rtd1312c-usb2phy", .data = &rtd1312c_phy_cfg }, - { .compatible = "realtek,rtd1315e-usb2phy", .data = &rtd1315e_phy_cfg }, - { .compatible = "realtek,rtd1319-usb2phy", .data = &rtd1319_phy_cfg }, - { .compatible = "realtek,rtd1319d-usb2phy", .data = &rtd1319d_phy_cfg }, - { .compatible = "realtek,rtd1395-usb2phy", .data = &rtd1395_phy_cfg }, - { .compatible = "realtek,rtd1395-usb2phy-2port", .data = &rtd1395_phy_cfg_2port }, - { .compatible = "realtek,rtd1619-usb2phy", .data = &rtd1619_phy_cfg }, - { .compatible = "realtek,rtd1619b-usb2phy", .data = &rtd1619b_phy_cfg }, - {}, -}; -MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); - -static struct platform_driver rtk_usb2phy_driver = { - .probe = rtk_usb2phy_probe, - .remove_new = rtk_usb2phy_remove, - .driver = { - .name = "rtk-usb2phy", - .of_match_table = usbphy_rtk_dt_match, - }, -}; - -module_platform_driver(rtk_usb2phy_driver); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform: rtk-usb2phy"); -MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); -MODULE_DESCRIPTION("Realtek usb 2.0 phy driver"); diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c deleted file mode 100644 index 67446a85e968..000000000000 --- a/drivers/phy/realtek/phy-rtk-usb3.c +++ /dev/null @@ -1,761 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * phy-rtk-usb3.c RTK usb3.0 phy driver - * - * copyright (c) 2023 realtek semiconductor corporation - * - */ - -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/uaccess.h> -#include <linux/debugfs.h> -#include <linux/nvmem-consumer.h> -#include <linux/regmap.h> -#include <linux/sys_soc.h> -#include <linux/mfd/syscon.h> -#include <linux/phy/phy.h> -#include <linux/usb.h> -#include <linux/usb/hcd.h> -#include <linux/usb/phy.h> - -#define USB_MDIO_CTRL_PHY_BUSY BIT(7) -#define USB_MDIO_CTRL_PHY_WRITE BIT(0) -#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8 -#define USB_MDIO_CTRL_PHY_DATA_SHIFT 16 - -#define MAX_USB_PHY_DATA_SIZE 0x30 -#define PHY_ADDR_0X09 0x09 -#define PHY_ADDR_0X0B 0x0b -#define PHY_ADDR_0X0D 0x0d -#define PHY_ADDR_0X10 0x10 -#define PHY_ADDR_0X1F 0x1f -#define PHY_ADDR_0X20 0x20 -#define PHY_ADDR_0X21 0x21 -#define PHY_ADDR_0X30 0x30 - -#define REG_0X09_FORCE_CALIBRATION BIT(9) -#define REG_0X0B_RX_OFFSET_RANGE_MASK 0xc -#define REG_0X0D_RX_DEBUG_TEST_EN BIT(6) -#define REG_0X10_DEBUG_MODE_SETTING 0x3c0 -#define REG_0X10_DEBUG_MODE_SETTING_MASK 0x3f8 -#define REG_0X1F_RX_OFFSET_CODE_MASK 0x1e - -#define USB_U3_TX_LFPS_SWING_TRIM_SHIFT 4 -#define USB_U3_TX_LFPS_SWING_TRIM_MASK 0xf -#define AMPLITUDE_CONTROL_COARSE_MASK 0xff -#define AMPLITUDE_CONTROL_FINE_MASK 0xffff -#define AMPLITUDE_CONTROL_COARSE_DEFAULT 0xff -#define AMPLITUDE_CONTROL_FINE_DEFAULT 0xffff - -#define PHY_ADDR_MAP_ARRAY_INDEX(addr) (addr) -#define ARRAY_INDEX_MAP_PHY_ADDR(index) (index) - -struct phy_reg { - void __iomem *reg_mdio_ctl; -}; - -struct phy_data { - u8 addr; - u16 data; -}; - -struct phy_cfg { - int param_size; - struct phy_data param[MAX_USB_PHY_DATA_SIZE]; - - bool check_efuse; - bool do_toggle; - bool do_toggle_once; - bool use_default_parameter; - bool check_rx_front_end_offset; -}; - -struct phy_parameter { - struct phy_reg phy_reg; - - /* Get from efuse */ - u8 efuse_usb_u3_tx_lfps_swing_trim; - - /* Get from dts */ - u32 amplitude_control_coarse; - u32 amplitude_control_fine; -}; - -struct rtk_phy { - struct usb_phy phy; - struct device *dev; - - struct phy_cfg *phy_cfg; - int num_phy; - struct phy_parameter *phy_parameter; - - struct dentry *debug_dir; -}; - -#define PHY_IO_TIMEOUT_USEC (50000) -#define PHY_IO_DELAY_US (100) - -static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - int ret; - unsigned int val; - - ret = read_poll_timeout(readl, val, ((val & mask) == result), - PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); - if (ret) { - pr_err("%s can't program USB phy\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -static int rtk_phy3_wait_vbusy(struct phy_reg *phy_reg) -{ - return utmi_wait_register(phy_reg->reg_mdio_ctl, USB_MDIO_CTRL_PHY_BUSY, 0); -} - -static u16 rtk_phy_read(struct phy_reg *phy_reg, char addr) -{ - unsigned int tmp; - u32 value; - - tmp = (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT); - - writel(tmp, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - value = readl(phy_reg->reg_mdio_ctl); - value = value >> USB_MDIO_CTRL_PHY_DATA_SHIFT; - - return (u16)value; -} - -static int rtk_phy_write(struct phy_reg *phy_reg, char addr, u16 data) -{ - unsigned int val; - - val = USB_MDIO_CTRL_PHY_WRITE | - (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT) | - (data << USB_MDIO_CTRL_PHY_DATA_SHIFT); - - writel(val, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - return 0; -} - -static void do_rtk_usb3_phy_toggle(struct rtk_phy *rtk_phy, int index, bool connect) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - struct phy_data *phy_data; - u8 addr; - u16 data; - int i; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (!phy_cfg->do_toggle) - return; - - i = PHY_ADDR_MAP_ARRAY_INDEX(PHY_ADDR_0X09); - phy_data = phy_cfg->param + i; - addr = phy_data->addr; - data = phy_data->data; - - if (!addr && !data) { - addr = PHY_ADDR_0X09; - data = rtk_phy_read(phy_reg, addr); - phy_data->addr = addr; - phy_data->data = data; - } - - rtk_phy_write(phy_reg, addr, data & (~REG_0X09_FORCE_CALIBRATION)); - mdelay(1); - rtk_phy_write(phy_reg, addr, data | REG_0X09_FORCE_CALIBRATION); -} - -static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - int i = 0; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (phy_cfg->use_default_parameter) - goto do_toggle; - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = phy_data->addr; - u16 data = phy_data->data; - - if (!addr && !data) - continue; - - rtk_phy_write(phy_reg, addr, data); - } - -do_toggle: - if (phy_cfg->do_toggle_once) - phy_cfg->do_toggle = true; - - do_rtk_usb3_phy_toggle(rtk_phy, index, false); - - if (phy_cfg->do_toggle_once) { - u16 check_value = 0; - int count = 10; - u16 value_0x0d, value_0x10; - - /* Enable Debug mode by set 0x0D and 0x10 */ - value_0x0d = rtk_phy_read(phy_reg, PHY_ADDR_0X0D); - value_0x10 = rtk_phy_read(phy_reg, PHY_ADDR_0X10); - - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, - value_0x0d | REG_0X0D_RX_DEBUG_TEST_EN); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, - (value_0x10 & ~REG_0X10_DEBUG_MODE_SETTING_MASK) | - REG_0X10_DEBUG_MODE_SETTING); - - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - - while (!(check_value & BIT(15))) { - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - mdelay(1); - if (count-- < 0) - break; - } - - if (!(check_value & BIT(15))) - dev_info(rtk_phy->dev, "toggle fail addr=0x%02x, data=0x%04x\n", - PHY_ADDR_0X30, check_value); - - /* Disable Debug mode by set 0x0D and 0x10 to default*/ - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, value_0x0d); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, value_0x10); - - phy_cfg->do_toggle = false; - } - - if (phy_cfg->check_rx_front_end_offset) { - u16 rx_offset_code, rx_offset_range; - u16 code_mask = REG_0X1F_RX_OFFSET_CODE_MASK; - u16 range_mask = REG_0X0B_RX_OFFSET_RANGE_MASK; - bool do_update = false; - - rx_offset_code = rtk_phy_read(phy_reg, PHY_ADDR_0X1F); - if (((rx_offset_code & code_mask) == 0x0) || - ((rx_offset_code & code_mask) == code_mask)) - do_update = true; - - rx_offset_range = rtk_phy_read(phy_reg, PHY_ADDR_0X0B); - if (((rx_offset_range & range_mask) == range_mask) && do_update) { - dev_warn(rtk_phy->dev, "Don't update rx_offset_range (rx_offset_code=0x%x, rx_offset_range=0x%x)\n", - rx_offset_code, rx_offset_range); - do_update = false; - } - - if (do_update) { - u16 tmp1, tmp2; - - tmp1 = rx_offset_range & (~range_mask); - tmp2 = rx_offset_range & range_mask; - tmp2 += (1 << 2); - rx_offset_range = tmp1 | (tmp2 & range_mask); - rtk_phy_write(phy_reg, PHY_ADDR_0X0B, rx_offset_range); - goto do_toggle; - } - } - - return 0; -} - -static int rtk_phy_init(struct phy *phy) -{ - struct rtk_phy *rtk_phy = phy_get_drvdata(phy); - int ret = 0; - int i; - unsigned long phy_init_time = jiffies; - - for (i = 0; i < rtk_phy->num_phy; i++) - ret = do_rtk_phy_init(rtk_phy, i); - - dev_dbg(rtk_phy->dev, "Initialized RTK USB 3.0 PHY (take %dms)\n", - jiffies_to_msecs(jiffies - phy_init_time)); - - return ret; -} - -static int rtk_phy_exit(struct phy *phy) -{ - return 0; -} - -static const struct phy_ops ops = { - .init = rtk_phy_init, - .exit = rtk_phy_exit, - .owner = THIS_MODULE, -}; - -static void rtk_phy_toggle(struct usb_phy *usb3_phy, bool connect, int port) -{ - int index = port; - struct rtk_phy *rtk_phy = NULL; - - rtk_phy = dev_get_drvdata(usb3_phy->dev); - - if (index > rtk_phy->num_phy) { - dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", - __func__, index, rtk_phy->num_phy); - return; - } - - do_rtk_usb3_phy_toggle(rtk_phy, index, connect); -} - -static int rtk_phy_notify_port_status(struct usb_phy *x, int port, - u16 portstatus, u16 portchange) -{ - bool connect = false; - - pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n", - __func__, port, (int)portstatus, (int)portchange); - if (portstatus & USB_PORT_STAT_CONNECTION) - connect = true; - - if (portchange & USB_PORT_STAT_C_CONNECTION) - rtk_phy_toggle(x, connect, port); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static struct dentry *create_phy_debug_root(void) -{ - struct dentry *phy_debug_root; - - phy_debug_root = debugfs_lookup("phy", usb_debug_root); - if (!phy_debug_root) - phy_debug_root = debugfs_create_dir("phy", usb_debug_root); - - return phy_debug_root; -} - -static int rtk_usb3_parameter_show(struct seq_file *s, void *unused) -{ - struct rtk_phy *rtk_phy = s->private; - struct phy_cfg *phy_cfg; - int i, index; - - phy_cfg = rtk_phy->phy_cfg; - - seq_puts(s, "Property:\n"); - seq_printf(s, " check_efuse: %s\n", - phy_cfg->check_efuse ? "Enable" : "Disable"); - seq_printf(s, " do_toggle: %s\n", - phy_cfg->do_toggle ? "Enable" : "Disable"); - seq_printf(s, " do_toggle_once: %s\n", - phy_cfg->do_toggle_once ? "Enable" : "Disable"); - seq_printf(s, " use_default_parameter: %s\n", - phy_cfg->use_default_parameter ? "Enable" : "Disable"); - - for (index = 0; index < rtk_phy->num_phy; index++) { - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - seq_printf(s, "PHY %d:\n", index); - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = ARRAY_INDEX_MAP_PHY_ADDR(i); - u16 data = phy_data->data; - - if (!phy_data->addr && !data) - seq_printf(s, " addr = 0x%02x, data = none ==> read value = 0x%04x\n", - addr, rtk_phy_read(phy_reg, addr)); - else - seq_printf(s, " addr = 0x%02x, data = 0x%04x ==> read value = 0x%04x\n", - addr, data, rtk_phy_read(phy_reg, addr)); - } - - seq_puts(s, "PHY Property:\n"); - seq_printf(s, " efuse_usb_u3_tx_lfps_swing_trim: 0x%x\n", - (int)phy_parameter->efuse_usb_u3_tx_lfps_swing_trim); - seq_printf(s, " amplitude_control_coarse: 0x%x\n", - (int)phy_parameter->amplitude_control_coarse); - seq_printf(s, " amplitude_control_fine: 0x%x\n", - (int)phy_parameter->amplitude_control_fine); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(rtk_usb3_parameter); - -static inline void create_debug_files(struct rtk_phy *rtk_phy) -{ - struct dentry *phy_debug_root = NULL; - - phy_debug_root = create_phy_debug_root(); - - if (!phy_debug_root) - return; - - rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); - - debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb3_parameter_fops); - - return; -} - -static inline void remove_debug_files(struct rtk_phy *rtk_phy) -{ - debugfs_remove_recursive(rtk_phy->debug_dir); -} -#else -static inline void create_debug_files(struct rtk_phy *rtk_phy) { } -static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } -#endif /* CONFIG_DEBUG_FS */ - -static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, int index) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - u8 value = 0; - struct nvmem_cell *cell; - - if (!phy_cfg->check_efuse) - goto out; - - cell = nvmem_cell_get(rtk_phy->dev, "usb_u3_tx_lfps_swing_trim"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb_u3_tx_lfps_swing_trim: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & USB_U3_TX_LFPS_SWING_TRIM_MASK; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (value > 0 && value < 0x8) - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = 0x8; - else - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = (u8)value; - -out: - return 0; -} - -static void update_amplitude_control_value(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_reg = &phy_parameter->phy_reg; - phy_cfg = rtk_phy->phy_cfg; - - if (phy_parameter->amplitude_control_coarse != AMPLITUDE_CONTROL_COARSE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_COARSE_MASK; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= (~val_mask); - data |= (phy_parameter->amplitude_control_coarse & val_mask); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->efuse_usb_u3_tx_lfps_swing_trim) { - u8 efuse_val = phy_parameter->efuse_usb_u3_tx_lfps_swing_trim; - u16 val_mask = USB_U3_TX_LFPS_SWING_TRIM_MASK; - int val_shift = USB_U3_TX_LFPS_SWING_TRIM_SHIFT; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= ~(val_mask << val_shift); - data |= ((efuse_val & val_mask) << val_shift); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->amplitude_control_fine != AMPLITUDE_CONTROL_FINE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_FINE_MASK; - - if (!phy_cfg->param[PHY_ADDR_0X21].addr && !phy_cfg->param[PHY_ADDR_0X21].data) - phy_cfg->param[PHY_ADDR_0X21].addr = PHY_ADDR_0X21; - - phy_cfg->param[PHY_ADDR_0X21].data = - phy_parameter->amplitude_control_fine & val_mask; - } -} - -static int parse_phy_data(struct rtk_phy *rtk_phy) -{ - struct device *dev = rtk_phy->dev; - struct phy_parameter *phy_parameter; - int ret = 0; - int index; - - rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * - rtk_phy->num_phy, GFP_KERNEL); - if (!rtk_phy->phy_parameter) - return -ENOMEM; - - for (index = 0; index < rtk_phy->num_phy; index++) { - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - - phy_parameter->phy_reg.reg_mdio_ctl = of_iomap(dev->of_node, 0) + index; - - /* Amplitude control address 0x20 bit 0 to bit 7 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-coarse-tuning", - &phy_parameter->amplitude_control_coarse)) - phy_parameter->amplitude_control_coarse = AMPLITUDE_CONTROL_COARSE_DEFAULT; - - /* Amplitude control address 0x21 bit 0 to bit 16 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-fine-tuning", - &phy_parameter->amplitude_control_fine)) - phy_parameter->amplitude_control_fine = AMPLITUDE_CONTROL_FINE_DEFAULT; - - get_phy_data_by_efuse(rtk_phy, phy_parameter, index); - - update_amplitude_control_value(rtk_phy, phy_parameter); - } - - return ret; -} - -static int rtk_usb3phy_probe(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy; - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct phy_provider *phy_provider; - const struct phy_cfg *phy_cfg; - int ret; - - phy_cfg = of_device_get_match_data(dev); - if (!phy_cfg) { - dev_err(dev, "phy config are not assigned!\n"); - return -EINVAL; - } - - rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); - if (!rtk_phy) - return -ENOMEM; - - rtk_phy->dev = &pdev->dev; - rtk_phy->phy.dev = rtk_phy->dev; - rtk_phy->phy.label = "rtk-usb3phy"; - rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status; - - rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); - - memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); - - rtk_phy->num_phy = 1; - - ret = parse_phy_data(rtk_phy); - if (ret) - goto err; - - platform_set_drvdata(pdev, rtk_phy); - - generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); - if (IS_ERR(generic_phy)) - return PTR_ERR(generic_phy); - - phy_set_drvdata(generic_phy, rtk_phy); - - phy_provider = devm_of_phy_provider_register(rtk_phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - ret = usb_add_phy_dev(&rtk_phy->phy); - if (ret) - goto err; - - create_debug_files(rtk_phy); - -err: - return ret; -} - -static void rtk_usb3phy_remove(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); - - remove_debug_files(rtk_phy); - - usb_remove_phy(&rtk_phy->phy); -} - -static const struct phy_cfg rtd1295_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [0] = {0x01, 0x4008}, [1] = {0x01, 0xe046}, - [2] = {0x02, 0x6046}, [3] = {0x03, 0x2779}, - [4] = {0x04, 0x72f5}, [5] = {0x05, 0x2ad3}, - [6] = {0x06, 0x000e}, [7] = {0x07, 0x2e00}, - [8] = {0x08, 0x3591}, [9] = {0x09, 0x525c}, - [10] = {0x0a, 0xa600}, [11] = {0x0b, 0xa904}, - [12] = {0x0c, 0xc000}, [13] = {0x0d, 0xef1c}, - [14] = {0x0e, 0x2000}, [15] = {0x0f, 0x0000}, - [16] = {0x10, 0x000c}, [17] = {0x11, 0x4c00}, - [18] = {0x12, 0xfc00}, [19] = {0x13, 0x0c81}, - [20] = {0x14, 0xde01}, [21] = {0x15, 0x0000}, - [22] = {0x16, 0x0000}, [23] = {0x17, 0x0000}, - [24] = {0x18, 0x0000}, [25] = {0x19, 0x4004}, - [26] = {0x1a, 0x1260}, [27] = {0x1b, 0xff00}, - [28] = {0x1c, 0xcb00}, [29] = {0x1d, 0xa03f}, - [30] = {0x1e, 0xc2e0}, [31] = {0x1f, 0x2807}, - [32] = {0x20, 0x947a}, [33] = {0x21, 0x88aa}, - [34] = {0x22, 0x0057}, [35] = {0x23, 0xab66}, - [36] = {0x24, 0x0800}, [37] = {0x25, 0x0000}, - [38] = {0x26, 0x040a}, [39] = {0x27, 0x01d6}, - [40] = {0x28, 0xf8c2}, [41] = {0x29, 0x3080}, - [42] = {0x2a, 0x3082}, [43] = {0x2b, 0x2078}, - [44] = {0x2c, 0xffff}, [45] = {0x2d, 0xffff}, - [46] = {0x2e, 0x0000}, [47] = {0x2f, 0x0040}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [8] = {0x08, 0x3591}, - [38] = {0x26, 0x840b}, - [40] = {0x28, 0xf842}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac86}, - [6] = {0x06, 0x0003}, - [9] = {0x09, 0x924c}, - [10] = {0x0a, 0xa608}, - [11] = {0x0b, 0xb905}, - [14] = {0x0e, 0x2010}, - [32] = {0x20, 0x705a}, - [33] = {0x21, 0xf645}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xcb66}, - [41] = {0x29, 0xff00}, }, - .check_efuse = true, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619b_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac8c}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x724c}, - [10] = {0x0a, 0xb610}, - [11] = {0x0b, 0xb90d}, - [13] = {0x0d, 0xef2a}, - [15] = {0x0f, 0x9050}, - [16] = {0x10, 0x000c}, - [32] = {0x20, 0x70ff}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xdb66}, - [38] = {0x26, 0x8609}, - [41] = {0x29, 0xff13}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319d_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac89}, - [4] = {0x04, 0xf2f5}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x424c}, - [10] = {0x0a, 0x9610}, - [11] = {0x0b, 0x9901}, - [12] = {0x0c, 0xf000}, - [13] = {0x0d, 0xef2a}, - [14] = {0x0e, 0x1000}, - [15] = {0x0f, 0x9050}, - [32] = {0x20, 0x7077}, - [35] = {0x23, 0x0b62}, - [37] = {0x25, 0x10ec}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = true, -}; - -static const struct of_device_id usbphy_rtk_dt_match[] = { - { .compatible = "realtek,rtd1295-usb3phy", .data = &rtd1295_phy_cfg }, - { .compatible = "realtek,rtd1319-usb3phy", .data = &rtd1319_phy_cfg }, - { .compatible = "realtek,rtd1319d-usb3phy", .data = &rtd1319d_phy_cfg }, - { .compatible = "realtek,rtd1619-usb3phy", .data = &rtd1619_phy_cfg }, - { .compatible = "realtek,rtd1619b-usb3phy", .data = &rtd1619b_phy_cfg }, - {}, -}; -MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); - -static struct platform_driver rtk_usb3phy_driver = { - .probe = rtk_usb3phy_probe, - .remove_new = rtk_usb3phy_remove, - .driver = { - .name = "rtk-usb3phy", - .of_match_table = usbphy_rtk_dt_match, - }, -}; - -module_platform_driver(rtk_usb3phy_driver); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform: rtk-usb3phy"); -MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); -MODULE_DESCRIPTION("Realtek usb 3.0 phy driver"); diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 1e15ffa79295..44e9b09de47a 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -1143,7 +1143,7 @@ int tb_port_lane_bonding_enable(struct tb_port *port) * Only set bonding if the link was not already bonded. This * avoids the lane adapter to re-enter bonding state. */ - if (width == TB_LINK_WIDTH_SINGLE) { + if (width == TB_LINK_WIDTH_SINGLE && !tb_is_upstream_port(port)) { ret = tb_port_set_lane_bonding(port, true); if (ret) goto err_lane1; @@ -2880,6 +2880,7 @@ static int tb_switch_lane_bonding_disable(struct tb_switch *sw) return tb_port_wait_for_link_width(down, TB_LINK_WIDTH_SINGLE, 100); } +/* Note updating sw->link_width done in tb_switch_update_link_attributes() */ static int tb_switch_asym_enable(struct tb_switch *sw, enum tb_link_width width) { struct tb_port *up, *down, *port; @@ -2919,10 +2920,10 @@ static int tb_switch_asym_enable(struct tb_switch *sw, enum tb_link_width width) return ret; } - sw->link_width = width; return 0; } +/* Note updating sw->link_width done in tb_switch_update_link_attributes() */ static int tb_switch_asym_disable(struct tb_switch *sw) { struct tb_port *up, *down; @@ -2957,7 +2958,6 @@ static int tb_switch_asym_disable(struct tb_switch *sw) return ret; } - sw->link_width = TB_LINK_WIDTH_DUAL; return 0; } diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 5acdeb766860..fd49f86e0353 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -213,7 +213,17 @@ static void tb_add_dp_resources(struct tb_switch *sw) if (!tb_switch_query_dp_resource(sw, port)) continue; - list_add(&port->list, &tcm->dp_resources); + /* + * If DP IN on device router exist, position it at the + * beginning of the DP resources list, so that it is used + * before DP IN of the host router. This way external GPU(s) + * will be prioritized when pairing DP IN to a DP OUT. + */ + if (tb_route(sw)) + list_add(&port->list, &tcm->dp_resources); + else + list_add_tail(&port->list, &tcm->dp_resources); + tb_port_dbg(port, "DP IN resource available\n"); } } diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index af981778382d..02f297f5637d 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -1529,6 +1529,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) unsigned long flags; int counter = 0; + local_bh_disable(); spin_lock_irqsave(&pdev->lock, flags); if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) { @@ -1541,6 +1542,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) cdnsp_died(pdev); spin_unlock_irqrestore(&pdev->lock, flags); + local_bh_enable(); return IRQ_HANDLED; } @@ -1557,6 +1559,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1); spin_unlock_irqrestore(&pdev->lock, flags); + local_bh_enable(); return IRQ_HANDLED; } diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index b19e38d5fd10..7f8d33f92ddb 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1047,7 +1047,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { dev_notice(ddev, "descriptor type invalid, skip\n"); - continue; + goto skip_to_next_descriptor; } switch (cap_type) { @@ -1078,6 +1078,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) break; } +skip_to_next_descriptor: total_len -= length; buffer += length; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b4584a0cd484..87480a6e6d93 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -622,29 +622,6 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); - - /* - * There is no need to lock status_mutex here, because status_mutex - * protects hub->status, and the phy driver only checks the port - * status without changing the status. - */ - if (!ret) { - struct usb_device *hdev = hub->hdev; - - /* - * Only roothub will be notified of port state changes, - * since the USB PHY only cares about changes at the next - * level. - */ - if (is_root_hub(hdev)) { - struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - - if (hcd->usb_phy) - usb_phy_notify_port_status(hcd->usb_phy, - port1 - 1, *status, *change); - } - } - return ret; } diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 0144ca8350c3..5c7538d498dd 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -2015,15 +2015,17 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) { struct dwc2_qtd *qtd; struct dwc2_host_chan *chan; - u32 hcint, hcintmsk; + u32 hcint, hcintraw, hcintmsk; chan = hsotg->hc_ptr_array[chnum]; - hcint = dwc2_readl(hsotg, HCINT(chnum)); + hcintraw = dwc2_readl(hsotg, HCINT(chnum)); hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + hcint = hcintraw & hcintmsk; + dwc2_writel(hsotg, hcint, HCINT(chnum)); + if (!chan) { dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); - dwc2_writel(hsotg, hcint, HCINT(chnum)); return; } @@ -2032,11 +2034,9 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) chnum); dev_vdbg(hsotg->dev, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", - hcint, hcintmsk, hcint & hcintmsk); + hcintraw, hcintmsk, hcint); } - dwc2_writel(hsotg, hcint, HCINT(chnum)); - /* * If we got an interrupt after someone called * dwc2_hcd_endpoint_disable() we don't want to crash below @@ -2046,8 +2046,7 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) return; } - chan->hcint = hcint; - hcint &= hcintmsk; + chan->hcint = hcintraw; /* * If the channel was halted due to a dequeue, the qtd list might diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0328c86ef806..b101dbf8c5dc 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2034,6 +2034,8 @@ static int dwc3_probe(struct platform_device *pdev) pm_runtime_put(dev); + dma_set_max_seg_size(dev, UINT_MAX); + return 0; err_exit_debugfs: diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 039bf241769a..57ddd2e43022 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -505,6 +505,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL; mode = DWC3_GCTL_PRTCAP_DEVICE; } + dwc3_set_mode(dwc, mode); dwc3_role_switch.fwnode = dev_fwnode(dwc->dev); dwc3_role_switch.set = dwc3_usb_role_switch_set; @@ -526,7 +527,6 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) } } - dwc3_set_mode(dwc, mode); return 0; } #else diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 3de43df6bbe8..fdf6d5d3c2ad 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -546,10 +546,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) pdata ? pdata->hs_phy_irq_index : -1); if (irq > 0) { /* Keep wakeup interrupts disabled until suspend */ - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 HS", qcom); if (ret) { dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); @@ -561,10 +560,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", pdata ? pdata->dp_hs_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 DP_HS", qcom); if (ret) { dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); @@ -576,10 +574,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", pdata ? pdata->dm_hs_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 DM_HS", qcom); if (ret) { dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); @@ -591,10 +588,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", pdata ? pdata->ss_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 SS", qcom); if (ret) { dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); @@ -758,6 +754,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev) if (!qcom->dwc3) { ret = -ENODEV; dev_err(dev, "failed to get dwc3 platform device\n"); + of_platform_depopulate(dev); } node_put: @@ -766,9 +763,9 @@ node_put: return ret; } -static struct platform_device * -dwc3_qcom_create_urs_usb_platdev(struct device *dev) +static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev) { + struct platform_device *urs_usb = NULL; struct fwnode_handle *fwh; struct acpi_device *adev; char name[8]; @@ -788,9 +785,26 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev) adev = to_acpi_device_node(fwh); if (!adev) - return NULL; + goto err_put_handle; + + urs_usb = acpi_create_platform_device(adev, NULL); + if (IS_ERR_OR_NULL(urs_usb)) + goto err_put_handle; + + return urs_usb; + +err_put_handle: + fwnode_handle_put(fwh); + + return urs_usb; +} - return acpi_create_platform_device(adev, NULL); +static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb) +{ + struct fwnode_handle *fwh = urs_usb->dev.fwnode; + + platform_device_unregister(urs_usb); + fwnode_handle_put(fwh); } static int dwc3_qcom_probe(struct platform_device *pdev) @@ -874,13 +888,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->qscratch_base = devm_ioremap_resource(dev, parent_res); if (IS_ERR(qcom->qscratch_base)) { ret = PTR_ERR(qcom->qscratch_base); - goto clk_disable; + goto free_urs; } ret = dwc3_qcom_setup_irq(pdev); if (ret) { dev_err(dev, "failed to setup IRQs, err=%d\n", ret); - goto clk_disable; + goto free_urs; } /* @@ -899,7 +913,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); - goto depopulate; + goto free_urs; } ret = dwc3_qcom_interconnect_init(qcom); @@ -931,10 +945,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev) interconnect_exit: dwc3_qcom_interconnect_exit(qcom); depopulate: - if (np) + if (np) { of_platform_depopulate(&pdev->dev); - else - platform_device_put(pdev); + } else { + device_remove_software_node(&qcom->dwc3->dev); + platform_device_del(qcom->dwc3); + } + platform_device_put(qcom->dwc3); +free_urs: + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); @@ -953,11 +973,16 @@ static void dwc3_qcom_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; int i; - device_remove_software_node(&qcom->dwc3->dev); - if (np) + if (np) { of_platform_depopulate(&pdev->dev); - else - platform_device_put(pdev); + } else { + device_remove_software_node(&qcom->dwc3->dev); + platform_device_del(qcom->dwc3); + } + platform_device_put(qcom->dwc3); + + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); diff --git a/drivers/usb/dwc3/dwc3-rtk.c b/drivers/usb/dwc3/dwc3-rtk.c index 590028e8fdcb..3cd6b184551c 100644 --- a/drivers/usb/dwc3/dwc3-rtk.c +++ b/drivers/usb/dwc3/dwc3-rtk.c @@ -183,10 +183,13 @@ static enum usb_device_speed __get_dwc3_maximum_speed(struct device_node *np) ret = of_property_read_string(dwc3_np, "maximum-speed", &maximum_speed); if (ret < 0) - return USB_SPEED_UNKNOWN; + goto out; ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed); +out: + of_node_put(dwc3_np); + return (ret < 0) ? USB_SPEED_UNKNOWN : ret; } @@ -339,6 +342,9 @@ static int dwc3_rtk_probe_dwc3_core(struct dwc3_rtk *rtk) switch_usb2_role(rtk, rtk->cur_role); + platform_device_put(dwc3_pdev); + of_node_put(dwc3_node); + return 0; err_pdev_put: diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 5b3cd455adec..61f3f8bbdcea 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -650,9 +650,8 @@ static int check_isoc_ss_overlap(struct mu3h_sch_ep_info *sch_ep, u32 offset) if (sch_ep->ep_type == ISOC_OUT_EP) { for (j = 0; j < sch_ep->num_budget_microframes; j++) { - k = XHCI_MTK_BW_INDEX(base + j + CS_OFFSET); - /* use cs to indicate existence of in-ss @(base+j) */ - if (tt->fs_bus_bw_in[k]) + k = XHCI_MTK_BW_INDEX(base + j); + if (tt->in_ss_cnt[k]) return -ESCH_SS_OVERLAP; } } else if (sch_ep->ep_type == ISOC_IN_EP || sch_ep->ep_type == INT_IN_EP) { @@ -769,6 +768,14 @@ static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used) tt->fs_frame_bw[f] -= (u16)sch_ep->bw_budget_table[j]; } } + + if (sch_ep->ep_type == ISOC_IN_EP || sch_ep->ep_type == INT_IN_EP) { + k = XHCI_MTK_BW_INDEX(base); + if (used) + tt->in_ss_cnt[k]++; + else + tt->in_ss_cnt[k]--; + } } if (used) diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 865b55e23b15..39f7ae7d3087 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -38,6 +38,7 @@ * @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes * @ls_bus_bw: save bandwidth used by LS eps in each uframes * @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames + * @in_ss_cnt: the count of Start-Split for IN eps * @ep_list: Endpoints using this TT */ struct mu3h_sch_tt { @@ -45,6 +46,7 @@ struct mu3h_sch_tt { u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT]; u8 ls_bus_bw[XHCI_MTK_MAX_ESIT]; u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT]; + u8 in_ss_cnt[XHCI_MTK_MAX_ESIT]; struct list_head ep_list; }; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index b93161374293..732cdeb73920 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/usb/phy.h> #include <linux/slab.h> @@ -148,7 +149,7 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s int ret; int irq; struct xhci_plat_priv *priv = NULL; - + bool of_match; if (usb_disabled()) return -ENODEV; @@ -253,16 +254,23 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s &xhci->imod_interval); } - hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); - if (IS_ERR(hcd->usb_phy)) { - ret = PTR_ERR(hcd->usb_phy); - if (ret == -EPROBE_DEFER) - goto disable_clk; - hcd->usb_phy = NULL; - } else { - ret = usb_phy_init(hcd->usb_phy); - if (ret) - goto disable_clk; + /* + * Drivers such as dwc3 manages PHYs themself (and rely on driver name + * matching for the xhci platform device). + */ + of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev); + if (of_match) { + hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); + if (IS_ERR(hcd->usb_phy)) { + ret = PTR_ERR(hcd->usb_phy); + if (ret == -EPROBE_DEFER) + goto disable_clk; + hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(hcd->usb_phy); + if (ret) + goto disable_clk; + } } hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); @@ -285,15 +293,17 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s goto dealloc_usb2_hcd; } - xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, - "usb-phy", 1); - if (IS_ERR(xhci->shared_hcd->usb_phy)) { - xhci->shared_hcd->usb_phy = NULL; - } else { - ret = usb_phy_init(xhci->shared_hcd->usb_phy); - if (ret) - dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n", - __func__, ret); + if (of_match) { + xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, + "usb-phy", 1); + if (IS_ERR(xhci->shared_hcd->usb_phy)) { + xhci->shared_hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(xhci->shared_hcd->usb_phy); + if (ret) + dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n", + __func__, ret); + } } xhci->shared_hcd->tpl_support = hcd->tpl_support; diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index a341b2fbb7b4..2b45404e9732 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -432,6 +432,8 @@ static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2412) }, /* USB2412 USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */ + { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2744) }, /* USB5744 USB 2.0 */ + { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x5744) }, /* USB5744 USB 3.0 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index c4e24a7b9290..292110e64a1d 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -16,6 +16,11 @@ static const struct onboard_hub_pdata microchip_usb424_data = { .num_supplies = 1, }; +static const struct onboard_hub_pdata microchip_usb5744_data = { + .reset_us = 0, + .num_supplies = 2, +}; + static const struct onboard_hub_pdata realtek_rts5411_data = { .reset_us = 0, .num_supplies = 1, @@ -50,6 +55,8 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2412", .data = µchip_usb424_data, }, { .compatible = "usb424,2514", .data = µchip_usb424_data, }, { .compatible = "usb424,2517", .data = µchip_usb424_data, }, + { .compatible = "usb424,2744", .data = µchip_usb5744_data, }, + { .compatible = "usb424,5744", .data = µchip_usb5744_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, { .compatible = "usb4b4,6504", .data = &cypress_hx3_data, }, diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c index c9decd0396d4..35770e608c64 100644 --- a/drivers/usb/misc/usb-ljca.c +++ b/drivers/usb/misc/usb-ljca.c @@ -457,8 +457,8 @@ static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, u64 adr, u8 id) { struct ljca_match_ids_walk_data wd = { 0 }; - struct acpi_device *parent, *adev; struct device *dev = adap->dev; + struct acpi_device *parent; char uid[4]; parent = ACPI_COMPANION(dev); @@ -466,17 +466,7 @@ static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, return; /* - * get auxdev ACPI handle from the ACPI device directly - * under the parent that matches _ADR. - */ - adev = acpi_find_child_device(parent, adr, false); - if (adev) { - ACPI_COMPANION_SET(&auxdev->dev, adev); - return; - } - - /* - * _ADR is a grey area in the ACPI specification, some + * Currently LJCA hw doesn't use _ADR instead the shipped * platforms use _HID to distinguish children devices. */ switch (adr) { @@ -656,10 +646,11 @@ static int ljca_enumerate_spi(struct ljca_adapter *adap) unsigned int i; int ret; + /* Not all LJCA chips implement SPI, a timeout reading the descriptors is normal */ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_SPI, NULL, 0, buf, sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); if (ret < 0) - return ret; + return (ret == -ETIMEDOUT) ? 0 : ret; /* check firmware response */ desc = (struct ljca_spi_descriptor *)buf; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 45dcfaadaf98..4dffcfefd62d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -203,8 +203,8 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5829E_ESIM 0x81e4 #define DELL_PRODUCT_5829E 0x81e6 -#define DELL_PRODUCT_FM101R 0x8213 -#define DELL_PRODUCT_FM101R_ESIM 0x8215 +#define DELL_PRODUCT_FM101R_ESIM 0x8213 +#define DELL_PRODUCT_FM101R 0x8215 #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -609,6 +609,8 @@ static void option_instat_callback(struct urb *urb); #define UNISOC_VENDOR_ID 0x1782 /* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */ #define TOZED_PRODUCT_LT70C 0x4055 +/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ +#define LUAT_PRODUCT_AIR720U 0x4e00 /* Device flags */ @@ -1546,7 +1548,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff), + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, @@ -2249,6 +2252,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ @@ -2271,6 +2275,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..bfb6f9481e87 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */ - tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0])); + tcpm_set_charge(port, !port->pd_supported || + pdo_max_current(port->snk_pdo[0])); if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0); @@ -5391,6 +5392,15 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port) if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data) port->tcpc->set_bist_data(port->tcpc, false); + switch (port->state) { + case ERROR_RECOVERY: + case PORT_RESET: + case PORT_RESET_WAIT_OFF: + return; + default: + break; + } + if (port->ams != NONE_AMS) port->ams = NONE_AMS; if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 0e867f531d34..196535ad996d 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -968,16 +968,17 @@ static int tps25750_start_patch_burst_mode(struct tps6598x *tps) ret = of_property_match_string(np, "reg-names", "patch-address"); if (ret < 0) { dev_err(tps->dev, "failed to get patch-address %d\n", ret); - return ret; + goto release_fw; } ret = of_property_read_u32_index(np, "reg", ret, &addr); if (ret) - return ret; + goto release_fw; if (addr == 0 || (addr >= 0x20 && addr <= 0x23)) { dev_err(tps->dev, "wrong patch address %u\n", addr); - return -EINVAL; + ret = -EINVAL; + goto release_fw; } bpms_data.addr = (u8)addr; @@ -1226,7 +1227,10 @@ static int tps6598x_probe(struct i2c_client *client) TPS_REG_INT_PLUG_EVENT; } - tps->data = device_get_match_data(tps->dev); + if (dev_fwnode(tps->dev)) + tps->data = device_get_match_data(tps->dev); + else + tps->data = i2c_get_match_data(client); if (!tps->data) return -EINVAL; @@ -1425,7 +1429,7 @@ static const struct of_device_id tps6598x_of_match[] = { MODULE_DEVICE_TABLE(of, tps6598x_of_match); static const struct i2c_device_id tps6598x_id[] = { - { "tps6598x" }, + { "tps6598x", (kernel_ulong_t)&tps6598x_data }, { } }; MODULE_DEVICE_TABLE(i2c, tps6598x_id); diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index b513749582d7..e4de6bc1f69b 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -144,10 +144,6 @@ struct usb_phy { */ int (*set_wakeup)(struct usb_phy *x, bool enabled); - /* notify phy port status change */ - int (*notify_port_status)(struct usb_phy *x, int port, - u16 portstatus, u16 portchange); - /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); @@ -321,15 +317,6 @@ usb_phy_set_wakeup(struct usb_phy *x, bool enabled) } static inline int -usb_phy_notify_port_status(struct usb_phy *x, int port, u16 portstatus, u16 portchange) -{ - if (x && x->notify_port_status) - return x->notify_port_status(x, port, portstatus, portchange); - else - return 0; -} - -static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_connect) |