1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
/*
* linux/can/isotp.h
*
* Definitions for ISO 15765-2 CAN transport protocol sockets
*
* Copyright (c) 2020 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*/
#ifndef _UAPI_CAN_ISOTP_H
#define _UAPI_CAN_ISOTP_H
#include <linux/types.h>
#include <linux/can.h>
#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)
/* for socket options affecting the socket (not the global system) */
#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */
#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */
/* sockopts to force stmin timer values for protocol regression tests */
#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */
/* use this time instead of value */
/* provided in FC from the receiver */
#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */
/* ignore received CF frames which */
/* timestamps differ less than val */
#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */
struct can_isotp_options {
__u32 flags; /* set flags for isotp behaviour. */
/* __u32 value : flags see below */
__u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */
/* __u32 value : time in nano secs */
__u8 ext_address; /* set address for extended addressing */
/* __u8 value : extended address */
__u8 txpad_content; /* set content of padding byte (tx) */
/* __u8 value : content on tx path */
__u8 rxpad_content; /* set content of padding byte (rx) */
/* __u8 value : content on rx path */
__u8 rx_ext_address; /* set address for extended addressing */
/* __u8 value : extended address (rx) */
};
struct can_isotp_fc_options {
__u8 bs; /* blocksize provided in FC frame */
/* __u8 value : blocksize. 0 = off */
__u8 stmin; /* separation time provided in FC frame */
/* __u8 value : */
/* 0x00 - 0x7F : 0 - 127 ms */
/* 0x80 - 0xF0 : reserved */
/* 0xF1 - 0xF9 : 100 us - 900 us */
/* 0xFA - 0xFF : reserved */
__u8 wftmax; /* max. number of wait frame transmiss. */
/* __u8 value : 0 = omit FC N_PDU WT */
};
struct can_isotp_ll_options {
__u8 mtu; /* generated & accepted CAN frame type */
/* __u8 value : */
/* CAN_MTU (16) -> standard CAN 2.0 */
/* CANFD_MTU (72) -> CAN FD frame */
__u8 tx_dl; /* tx link layer data length in bytes */
/* (configured maximum payload length) */
/* __u8 value : 8,12,16,20,24,32,48,64 */
/* => rx path supports all LL_DL values */
__u8 tx_flags; /* set into struct canfd_frame.flags */
/* at frame creation: e.g. CANFD_BRS */
/* Obsolete when the BRS flag is fixed */
/* by the CAN netdriver configuration */
};
/* flags for isotp behaviour */
#define CAN_ISOTP_LISTEN_MODE 0x0001 /* listen only (do not send FC) */
#define CAN_ISOTP_EXTEND_ADDR 0x0002 /* enable extended addressing */
#define CAN_ISOTP_TX_PADDING 0x0004 /* enable CAN frame padding tx path */
#define CAN_ISOTP_RX_PADDING 0x0008 /* enable CAN frame padding rx path */
#define CAN_ISOTP_CHK_PAD_LEN 0x0010 /* check received CAN frame padding */
#define CAN_ISOTP_CHK_PAD_DATA 0x0020 /* check received CAN frame padding */
#define CAN_ISOTP_HALF_DUPLEX 0x0040 /* half duplex error state handling */
#define CAN_ISOTP_FORCE_TXSTMIN 0x0080 /* ignore stmin from received FC */
#define CAN_ISOTP_FORCE_RXSTMIN 0x0100 /* ignore CFs depending on rx stmin */
#define CAN_ISOTP_RX_EXT_ADDR 0x0200 /* different rx extended addressing */
#define CAN_ISOTP_WAIT_TX_DONE 0x0400 /* wait for tx completion */
#define CAN_ISOTP_SF_BROADCAST 0x0800 /* 1-to-N functional addressing */
#define CAN_ISOTP_CF_BROADCAST 0x1000 /* 1-to-N transmission w/o FC */
#define CAN_ISOTP_DYN_FC_PARMS 0x2000 /* dynamic FC parameters BS/STmin */
/* protocol machine default values */
#define CAN_ISOTP_DEFAULT_FLAGS 0
#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */
#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000 /* 50 micro seconds */
#define CAN_ISOTP_DEFAULT_RECV_BS 0
#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
/*
* Remark on CAN_ISOTP_DEFAULT_RECV_* values:
*
* We can strongly assume, that the Linux Kernel implementation of
* CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
* But as we like to be able to behave as a commonly available ECU,
* these default settings can be changed via sockopts.
* For that reason the STmin value is intentionally _not_ checked for
* consistency and copied directly into the flow control (FC) frame.
*/
/* link layer default values => make use of Classical CAN frames */
#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0
/*
* The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as
* it only makes sense for isotp implementation tests to run without
* a N_As value. As user space applications usually do not set the
* frame_txtime element of struct can_isotp_options the new in-kernel
* default is very likely overwritten with zero when the sockopt()
* CAN_ISOTP_OPTS is invoked.
* To make sure that a N_As value of zero is only set intentional the
* value '0' is now interpreted as 'do not change the current value'.
* When a frame_txtime of zero is required for testing purposes this
* CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
*/
#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF
#endif /* !_UAPI_CAN_ISOTP_H */
|
