path: root/drivers/staging/winbond/wbusb.c

/*
 * Copyright 2008 Pavel Machek <pavel@suse.cz>
 *
 * Distribute under GPLv2.
 */
#include <net/mac80211.h>
#include <linux/usb.h>

#include "core.h"
#include "mds_f.h"
#include "mlmetxrx_f.h"
#include "mto_f.h"
#include "wbhal_f.h"
#include "wblinux_f.h"

MODULE_AUTHOR("Original by: Jeff Lee<YY_Lee@issc.com.tw> Adapted to 2.6.x by Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>");
MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");

static struct usb_device_id wb35_table[] __devinitdata = {
	{USB_DEVICE(0x0416, 0x0035)},
	{USB_DEVICE(0x18E8, 0x6201)},
	{USB_DEVICE(0x18E8, 0x6206)},
	{USB_DEVICE(0x18E8, 0x6217)},
	{USB_DEVICE(0x18E8, 0x6230)},
	{USB_DEVICE(0x18E8, 0x6233)},
	{USB_DEVICE(0x1131, 0x2035)},
	{ 0, }
};

MODULE_DEVICE_TABLE(usb, wb35_table);

static struct ieee80211_rate wbsoft_rates[] = {
	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
};

static struct ieee80211_channel wbsoft_channels[] = {
	{ .center_freq = 2412},
};

static struct ieee80211_supported_band wbsoft_band_2GHz = {
	.channels	= wbsoft_channels,
	.n_channels	= ARRAY_SIZE(wbsoft_channels),
	.bitrates	= wbsoft_rates,
	.n_bitrates	= ARRAY_SIZE(wbsoft_rates),
};

static int wbsoft_add_interface(struct ieee80211_hw *dev,
				 struct ieee80211_if_init_conf *conf)
{
	printk("wbsoft_add interface called\n");
	return 0;
}

static void wbsoft_remove_interface(struct ieee80211_hw *dev,
				     struct ieee80211_if_init_conf *conf)
{
	printk("wbsoft_remove interface called\n");
}

static void wbsoft_stop(struct ieee80211_hw *hw)
{
	printk(KERN_INFO "%s called\n", __func__);
}

static int wbsoft_get_stats(struct ieee80211_hw *hw,
			    struct ieee80211_low_level_stats *stats)
{
	printk(KERN_INFO "%s called\n", __func__);
	return 0;
}

static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
			       struct ieee80211_tx_queue_stats *stats)
{
	printk(KERN_INFO "%s called\n", __func__);
	return 0;
}

static void wbsoft_configure_filter(struct ieee80211_hw *dev,
				     unsigned int changed_flags,
				     unsigned int *total_flags,
				     int mc_count, struct dev_mc_list *mclist)
{
	unsigned int bit_nr, new_flags;
	u32 mc_filter[2];
	int i;

	new_flags = 0;

	if (*total_flags & FIF_PROMISC_IN_BSS) {
		new_flags |= FIF_PROMISC_IN_BSS;
		mc_filter[1] = mc_filter[0] = ~0;
	} else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
		new_flags |= FIF_ALLMULTI;
		mc_filter[1] = mc_filter[0] = ~0;
	} else {
		mc_filter[1] = mc_filter[0] = 0;
		for (i = 0; i < mc_count; i++) {
			if (!mclist)
				break;
			printk("Should call ether_crc here\n");
			//bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
			bit_nr = 0;

			bit_nr &= 0x3F;
			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
			mclist = mclist->next;
		}
	}

	dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;

	*total_flags = new_flags;
}

static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
	struct wbsoft_priv *priv = dev->priv;

	MLMESendFrame(priv, skb->data, skb->len, FRAME_TYPE_802_11_MANAGEMENT);

	return NETDEV_TX_OK;
}


static int wbsoft_start(struct ieee80211_hw *dev)
{
	struct wbsoft_priv *priv = dev->priv;

	priv->enabled = true;

	return 0;
}

static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
{
	struct wbsoft_priv *priv = dev->priv;
	struct ieee80211_conf *conf = &dev->conf;
	ChanInfo ch;

	printk("wbsoft_config called\n");

	ch.band = 1;
	ch.ChanNo = 1;	/* Should use channel_num, or something, as that is already pre-translated */


	hal_set_current_channel(&priv->sHwData, ch);
	hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
//	hal_set_cap_info(&priv->sHwData, ?? );
// hal_set_ssid(phw_data_t pHwData,  u8 * pssid,  u8 ssid_len); ??
	hal_set_accept_broadcast(&priv->sHwData, 1);
	hal_set_accept_promiscuous(&priv->sHwData,  1);
	hal_set_accept_multicast(&priv->sHwData,  1);
	hal_set_accept_beacon(&priv->sHwData,  1);
	hal_set_radio_mode(&priv->sHwData,  0);
	//hal_set_antenna_number(  phw_data_t pHwData, u8 number )
	//hal_set_rf_power(phw_data_t pHwData, u8 PowerIndex)


//	hal_start_bss(&priv->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE);	??

//void hal_set_rates(phw_data_t pHwData, u8 * pbss_rates,
//		   u8 length, unsigned char basic_rate_set)

	return 0;
}

static int wbsoft_config_interface(struct ieee80211_hw *dev,
				    struct ieee80211_vif *vif,
				    struct ieee80211_if_conf *conf)
{
	printk("wbsoft_config_interface called\n");
	return 0;
}

static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
{
	printk("wbsoft_get_tsf called\n");
	return 0;
}

static const struct ieee80211_ops wbsoft_ops = {
	.tx			= wbsoft_tx,
	.start			= wbsoft_start,		/* Start can be pretty much empty as we do wb35_hw_init() during probe? */
	.stop			= wbsoft_stop,
	.add_interface		= wbsoft_add_interface,
	.remove_interface	= wbsoft_remove_interface,
	.config			= wbsoft_config,
	.config_interface	= wbsoft_config_interface,
	.configure_filter	= wbsoft_configure_filter,
	.get_stats		= wbsoft_get_stats,
	.get_tx_stats		= wbsoft_get_tx_stats,
	.get_tsf		= wbsoft_get_tsf,
// conf_tx: hal_set_cwmin()/hal_set_cwmax;
};

static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
{
	struct wbsoft_priv *priv = hw->priv;
	phw_data_t	pHwData;
	u8		*pMacAddr;
	u8		*pMacAddr2;
	u32		InitStep = 0;
	u8		EEPROM_region;
	u8		HwRadioOff;

	//
	// Setting default value for Linux
	//
	priv->sLocalPara.region_INF = REGION_AUTO;
	priv->sLocalPara.TxRateMode = RATE_AUTO;
	priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;	// B/G mode
	priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
	priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
	hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
	priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
	priv->sLocalPara.bPreambleMode = AUTO_MODE;
	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
	pHwData = &priv->sHwData;
	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );

	//added by ws for wep key error detection
	priv->sLocalPara.bWepKeyError= false;
	priv->sLocalPara.bToSelfPacketReceived = false;
	priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds

	// Initial USB hal
	InitStep = 1;
	pHwData = &priv->sHwData;
	if (!hal_init_hardware(hw))
		goto error;

	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
	if (EEPROM_region != REGION_AUTO)
		priv->sLocalPara.region = EEPROM_region;
	else {
		if (priv->sLocalPara.region_INF != REGION_AUTO)
			priv->sLocalPara.region = priv->sLocalPara.region_INF;
		else
			priv->sLocalPara.region = REGION_USA;	//default setting
	}

	// Get Software setting flag from hal
	priv->sLocalPara.boAntennaDiversity = false;
	if (hal_software_set(pHwData) & 0x00000001)
		priv->sLocalPara.boAntennaDiversity = true;

	//
	// For TS module
	//
	InitStep = 2;

	// For MDS module
	InitStep = 3;
	Mds_initial(priv);

	//=======================================
	// Initialize the SME, SCAN, MLME, ROAM
	//=======================================
	InitStep = 4;
	InitStep = 5;
	InitStep = 6;

	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
	pMacAddr = priv->sLocalPara.ThisMacAddress;
	pMacAddr2 = priv->sLocalPara.PermanentAddress;
	hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
	else {
		// Set the user define MAC address
		hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
	}

	//get current antenna
	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
#endif
	hal_get_hw_radio_off( pHwData );

	// Waiting for HAL setting OK
	while (!hal_idle(pHwData))
		msleep(10);

	MTO_Init(priv);

	HwRadioOff = hal_get_hw_radio_off( pHwData );
	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;

	hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );

	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
	//set a tx power for reference.....
//	sme_set_tx_power_level(priv, 12);	FIXME?
	return true;

error:
	switch (InitStep) {
	case 5:
	case 4:
	case 3: Mds_Destroy( priv );
	case 2:
	case 1: hal_halt( pHwData, NULL );
	case 0: break;
	}

	return false;
}

static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
{
	PWBUSB		pWbUsb;
        struct usb_host_interface *interface;
	struct usb_endpoint_descriptor *endpoint;
	u32	ltmp;
	struct usb_device *udev = interface_to_usbdev(intf);
	struct wbsoft_priv *priv;
	struct ieee80211_hw *dev;
	int err;

	usb_get_dev(udev);

	// 20060630.2 Check the device if it already be opened
	err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
			      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
			      0x0, 0x400, &ltmp, 4, HZ*100 );
	if (err)
		goto error;

	ltmp = cpu_to_le32(ltmp);
	if (ltmp) {  // Is already initialized?
		err = -EBUSY;
		goto error;
	}

	dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
	if (!dev)
		goto error;

	priv = dev->priv;

	spin_lock_init(&priv->SpinLock);

	pWbUsb = &priv->sHwData.WbUsb;
	pWbUsb->udev = udev;

        interface = intf->cur_altsetting;
        endpoint = &interface->endpoint[0].desc;

	if (endpoint[2].wMaxPacketSize == 512) {
		printk("[w35und] Working on USB 2.0\n");
		pWbUsb->IsUsb20 = 1;
	}

	if (!wb35_hw_init(dev)) {
		err = -EINVAL;
		goto error_free_hw;
	}

	SET_IEEE80211_DEV(dev, &udev->dev);
	{
		phw_data_t pHwData = &priv->sHwData;
		unsigned char		dev_addr[MAX_ADDR_LEN];
		hal_get_permanent_address(pHwData, dev_addr);
		SET_IEEE80211_PERM_ADDR(dev, dev_addr);
	}

	dev->extra_tx_headroom = 12;	/* FIXME */
	dev->flags = 0;

	dev->channel_change_time = 1000;
	dev->queues = 1;

	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;

	err = ieee80211_register_hw(dev);
	if (err)
		goto error_free_hw;

	usb_set_intfdata(intf, priv);

	return 0;

error_free_hw:
	ieee80211_free_hw(dev);
error:
	usb_put_dev(udev);
	return err;
}

static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
	Mds_Destroy( adapter );

	// Turn off Rx and Tx hardware ability
	hal_stop( &adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
	WBDEBUG(("[w35und] Hal_stop O.K.\n"));
#endif
	msleep(100);// Waiting Irp completed

	// Halt the HAL
	hal_halt(&adapter->sHwData, NULL);
}


static void wb35_disconnect(struct usb_interface *intf)
{
	struct wbsoft_priv *priv = usb_get_intfdata(intf);

	wb35_hw_halt(priv);

	usb_set_intfdata(intf, NULL);
	usb_put_dev(interface_to_usbdev(intf));
}

static struct usb_driver wb35_driver = {
	.name		= "w35und",
	.id_table	= wb35_table,
	.probe		= wb35_probe,
	.disconnect	= wb35_disconnect,
};

static int __init wb35_init(void)
{
	return usb_register(&wb35_driver);
}

static void __exit wb35_exit(void)
{
	usb_deregister(&wb35_driver);
}

module_init(wb35_init);
module_exit(wb35_exit);